Scribd
Upload
95 views3 pages

Inductive Sensor BI2-M12-AN6X-H1141

This document provides technical specifications for an inductive sensor (BI2-M12-AN6X-H1141) including its type, ID number, features, electrical and mechanical data, mounting instructions, and available accessories. It is an M12 threaded barrel sensor that operates between 10-30VDC with an NO contact and 2kHz switching frequency. It has an IP67 rating and detects metal objects within 2mm without contact.

Uploaded by

FlexXcat Miguel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Topics covered

  • Connector Type,
  • Mounting Conditions,
  • Sheath Material,
  • Installation Guidelines,
  • Housing Material,
  • Operating Voltage,
  • Electrical Data,
  • Design,
  • Wiring Diagram,
  • Sensor Specifications
95 views3 pages

Inductive Sensor BI2-M12-AN6X-H1141

This document provides technical specifications for an inductive sensor (BI2-M12-AN6X-H1141) including its type, ID number, features, electrical and mechanical data, mounting instructions, and available accessories. It is an M12 threaded barrel sensor that operates between 10-30VDC with an NO contact and 2kHz switching frequency. It has an IP67 rating and detects metal objects within 2mm without contact.

Uploaded by

FlexXcat Miguel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Topics covered

  • Connector Type,
  • Mounting Conditions,
  • Sheath Material,
  • Installation Guidelines,
  • Housing Material,
  • Operating Voltage,
  • Electrical Data,
  • Design,
  • Wiring Diagram,
  • Sensor Specifications

BI2-M12-AN6X-H1141

Inductive Sensor

Technical data Features

Type BI2-M12-AN6X-H1141
■M12 × 1 threaded barrel
■Chrome-plated brass
ID 46066 ■DC 3-wire, 10…30 VDC
■NO contact, NPN output
General data ■M12 x 1 male connector
Rated switching distance 2 mm
Mounting conditions Flush Wiring diagram
Secured operating distance ≤ (0.81 × Sn) mm
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms
= 0.4
Repeat accuracy ≤ 2 % of full scale

BI2-M12-AN6X-H1141 | 11/29/2022 05-57 | technical changes reserved


Temperature drift ≤ ±10 %
Hysteresis 3…15 %
Electrical data
Operating voltage 10…30 VDC
Residual ripple ≤ 10 % Uss
DC rated operational current ≤ 200 mA
No-load current 15 mA
Residual current ≤ 0.1 mA Functional principle
Isolation test voltage ≤ 0.5 kV Inductive sensors detect metal objects
Short-circuit protection yes / Cyclic contactless and wear-free. For this, they use a
high-frequency electromagnetic AC field that
Voltage drop at Ie ≤ 1.8 V interacts with the target. Inductive sensors
generate this field via an RLC circuit with a
Wire breakage/Reverse polarity protection yes / Complete ferrite coil.
Output function 3-wire, NO contact, NPN
Switching frequency 2 kHz

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | [Link] 1|3
Technical data

Mechanical data
Design Threaded barrel, M12 × 1
Dimensions 52 mm
Housing material Metal, CuZn, Chrome-plated
Active area material Plastic, PA12-GF30
Max. tightening torque of housing nut 10 Nm
Electrical connection Connector, M12 × 1
Environmental conditions
Ambient temperature -25…+70 °C
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 2283 years acc. to SN 29500 (Ed. 99) 40
°C
Switching state LED, Yellow

Mounting instructions

Mounting instructions/Description
Distance D 24 mm
Distance W 3 x Sn
Distance T 3xB
Distance S 1.5 x B

BI2-M12-AN6X-H1141 | 11/29/2022 05-57 | technical changes reserved


Distance G 6 x Sn
Diameter active Ø 12 mm
area B

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | [Link] 2|3
Accessories

QM-12 6945101 BST-12B 6947212


Quick-mount bracket with dead-stop; Mounting clamp for threaded barrel
material: Chrome-plated brass. Male sensors, with dead-stop; material:
thread M16 × 1. Note: The switching PA6
distance of the proximity switches
may change when using quick-mount
brackets.

MW-12 6945003 BSS-12 6901321


Mounting bracket for threaded barrel Mounting clamp for smooth and
sensors; material: Stainless steel A2 threaded barrel sensors; material:
1.4301 (AISI 304) Polypropylene

Wiring accessories

Dimension drawing Type ID


RKC4T-2/TEL 6625010 Connection cable, female M12, straight,
3-pin, cable length: 2 m, sheath
material: PVC, black; cULus approval;
other cable lengths and qualities
available, see [Link]

BI2-M12-AN6X-H1141 | 11/29/2022 05-57 | technical changes reserved

TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | [Link] 3|3

You might also like