Roofs and Façades
PRODUCT RANGE
TRIMOTERM FTV FIREPROOF FAÇADE PANELS
Trimoterm FTV
Trimoterm FTV fireproof panels are used for a wide range of external façade cladding,
internal partition walls, fire walls and ceilings for either leisure, commercial, industrial,
hygenic and other facilities. Panels can be installed in either vertical or horizontal
orientation.
An example of panel marking: Trimoterm FTV Side A
FTV ms-60/1000
Width Side B
Thickness
S - profile (standard profile)
Side B
Profile Type Side A Side B
Side A
S - profile (s) • •
V - profile
V - profile (v) •
Smooth profile (g, G) • •
Smooth profile
Micro-lined profile (m) •
Multi vario (X) •
Micro-lined profile
Side A is usually the external side of a panel.
Thickness selection for the panels: 50, 60, 80, 100, 120, 150,
Multi vario profile 200, 240 mm.
Non-standard panel widths can be made by special request.
Panel lengths range from 2 to 14 m.
Trimoterm FTV INVISIO
Trimoterm FTV INVISIO fireproof façade panels shows its outrange clean facade
outlook with no visible fixings while fixing on intermediate cladding rails is performed
through a panel side lap joint by special developed supporting elements. Panels
are mainly intended for vertical type of cladding but under certain conditions and
limitations can also be used for various horizontal cladding applications.
An example of panel marking:
Trimoterm FTV INVISIO Side A
FTV H ms-60/1000
Width
Thickness
Side B
Side B
Side A
S - profile (standard profile)
Invisio Tipe of profile Side A Side B
S - profile (s) • •
V - profile
V - profile (v) •
Smooth profile (g, G) • •
Smooth profile
Micro-lined (m) •
Multi vario (X) •
Micro-lined profile
Side A is usually the external side of a panel.
Thickness selection for the panels: 60, 80, 100, 120, 150 mm.
Multi vario profile Non-standard panel widths can be made by special request.
Panel lengths range from 2 to 14 m.
Trimoterm FTV GLADIO
Trimoterm FTV GLADIO façade panels are COMPLETELY and OPTICALLY FLAT. The outer, An example of panel marking:
visible side of metal sheet is manufactured using a special high technology process
FTV Gs-60/1000
that ensures an optimal flat surface. For further possibilities of the internal facing see
Trimoterm FTV and INVISIO. Width
Side A Thickness
Side B
Gladio
Side B
Trimoterm FTV MULTI VARIO
Trimoterm FTV MULTI VARIO
Side A
Side B
An example of panel marking
The basic model of the MULTI VARIO panel is the enlarged micro profile. For further
possibilities of the internal facing see Trimoterm FTV and INVISIO. FTV X 21 s-60/1000
Width
Thickness
Side B
Profile number
A wide variety of profile possibilities can be derived from the basic model; these are Multi vario
combinations of the flat and enlarged micro profiles. Some possibilities are presented
in the sections below.
Trimoterm FTV ACOUSTIC PANEL
Acoustic sound absorbing panels are used for sound damping in internal applications
only. They can be erected as cladding of sound-absorbing cabins, as partition walls An example of panel marking
and additional cladding on façades and roofs.
FTV ss-60/1000-ac
Side A
Acoustic
Width
Thickness
Side B Side B
Side A
Trimoterm SNV FIREPROOF ROOF PANELS
Trimoterm SNV
Trimoterm SNV fireproof panels are mainly used for roof cladding however they can
also be used for the wall clading. Minimum roof slope is 5° however, if longitudinal
joints are additionally sealed the roof slope can be reduced down to 3°.
Side A
An example of panel marking
SNV s-60/1000
Side B
Width
Thickness
Trapezoid profile
Side B
S - profile (standard profile)
V - profile
Smooth profile
Profile Type Side A Side B
Trapezoid •
S - profile (s) •
V - profile (v) •
Smooth (g) •
Thickness selection for the panels 60, 80, 100, 120, 150 in 200 mm.
Panel lengths range from 2 to 14 m.
Rights to alteration reserved.
The last version of the document is available on
www.trimo.si.
Calculation of allowed spans is by the For information about the delivery of panels
SandStat 3 program see Trimo’s General conditions and the valid
Cert. No. 650a to LPS 1208 price list.
TRIMOVAL and TRIMOFORM PROFILED SHEET METAL
Trimoval TE 600
Profiled metal sheet TE 600 is used for the assembly of floor constructions under
commercial name HI-BOND.
Trimoval TP 650, TPF 650 and Trimoval TP 835, TPF 835
Profiled metal sheet types TP650 and TP 835 are intended for roofing and cladding of
un-insulated buildings, or ventilated roofs and façades.
TPF is trapezoid sheet metal with felt. Panel lengths range from 2 to 8.5 m.
Trimoval TPO 1000
TPO 1000 is intended for roofing and cladding of un-insulated buildings or as a form
of ventilated roofs and façades.
Panel lengths range from 2 to 14 m.
Trimoval TPO Dom
TPO Dom roofing is installed in bands from the ridge to the eaves in a single section.
TPO Dom is intended for the roofing of either new or reconstruction of old residential
buildings.
Panel lengths range from 2 to 14 m.
Trimoform
Trimoform modular roofing adjusts to each architectural style by its innovative design. It
is suitable for roofing on houses and the replacement of old, worn out roofing.
Published by: TRIMO d.d., Design: Meta Gabrijel, Photography: Janez Erjavec, Miran Kambič, Bernd Theisen, Archive Trimo, Printed by: Tiskarna Petrič, Circulation: 4500/SLO, 12/2004
