CHEMISTRY (Code No.

043)
XI-XII (2023-24)
Rationale
igher Secondary is the most crucial stage of school education because at this juncture specialized discipline
ased, content -oriented courses are introdughjtgjtgjeer in basic sciences or professional courses like
medicine, engineering, technology and study courses in applied areas of science and technology at tertiary
evel. Therefore, there is a need to provide learners with sufficient conceptual background of Chemistry,
which will make them competent to meet the challenges of academic and professional courses after the
enior secondary stage.
he new and updated curriculum is based on disciplinary approach with rigour and depth taking care that
he syllabus is not heavy and at the same time it is comparable to the international level. The knowledge
elated to the subject of Chemistry has undergone tremendous changes during the past one decade. Many
ew areas like synthetic materials, bio -molecules, natural resources, industrial chemistry are coming in a
ig way and deserve to be an integral part of chemistry syllabus at senior secondary stage. At
nternational level, new formulations and nomenclature of elements and compounds, symbols and units of
hysical quantities floated by scientific bodies like IUPAC and CGPM are of immense importance and
eed to be incorporated in • the updated syllabus. The revised syllabus takes care of all these aspects.
Greater emphasis has been• laidpron om use of new nomenclature, symbols and formulations, teaching of
undamental concepts, application m ote
akeof conceptsun in chemistry to industry/ technology, logical sequencing of
nits, removal of obsolete • content e ngi and sturepetition,de etc.
r
exp neer dent stand
i s
Objectives • fut ose t ng, te cap ing o
ure he c ab fb
eq at Senior
uip stud Secondary stu hnol Stage le as
he curriculum of Chemistry de ogy f s icto:
o aims f
• i n du stud s an ts i e n )a tud acts
s t e d t o t te y i an
de d
• vel ries a nts t thei vari rtiar ng ch con
e o n o r o y lev emi cept
• xpo p p
r
da
g fac app us e el str s in
ap s o r e l i m
pri e the blem icultu vari catio ergi . yi
n ch
• en s
gin e stu stude solvi re.
ou
sc
n in n gn aca emis
va e de t
• acq eer den
i
nts ng s ha
llen riou w are mi ry w
•
u
de aint g et n t s t
wit o di ills i k ges s sph as o
c an hile r
vel s c h f f n e f dp e
int op tud
en
. int
e
e ren stud r ela
t
res che rof tainin
egr an ts w r fac t p e n e dt o f m e ssi g
ate in e o roce ts. o h chem istry on the
life teres ith d f ch sse e alt i cal nd a a l cou xcite
e
ski t i em s u
lls in stu ffere istr s e
h , nu s c i a p p r ses men
an
d v dent nt as y w d in trit ences rise (su t of
alu s to pec ith ind ion an them ch c
es t o the stri u , en d tec as hemi
in t stud s of c rd e v iro hn ith w me str
he yc
h
he
m isc s and n m o l o t h d i c
y.
con em i s ipli the en gy. eir ine
tex i t r n es t, p rel ,
t o stry a y use of ir tec op eva
f ch sa d in sci h u n ce
em d en nolo lat
ion in
istr iscip daily ce
s u
gic
a , w
y. l ine life c ha l a eat
. . s p pplic he
r,
hys ati
ics on
, bi s
olo .
gy,
geo
log
y,
 COURSE STRUCTURE
CLASS–XI (THEORY) (2023-24)
Time: 3 Hours Total Marks70

S.No UNIT No. of Marks

Periods
1 Some Basic Concepts of Chemistry 12 7

2 Structure of Atom 14 9
3 Classification of Elements and Periodicity in 8 6
Properties
4 Chemical Bonding and Molecular Structure 14 7
5 Chemical Thermodynamics 16 9
6 Equilibrium 14 7

7 Redox Reactions 6 4

8 Organic Chemistry: Some basic Principles and 14 11

Techniques
9 Hydrocarbons 12 10

TOTAL 70

Unit I: Some Basic Concepts of Chemistry 12 Periods

General Introduction: Importance and scope of Chemistry.

Nature of matter, laws of chemical combination, Dalton's atomic theory: concept of elements,
atoms and molecules.
Atomic and molecular masses, mole concept and molar mass, percentage composition,
empirical and molecular formula, chemical reactions, stoichiometry and calculations based on
stoichiometry.

Unit II: Structure of Atom 14 Periods

Discovery of Electron, Proton and Neutron, atomic number, isotopes and isobars. Thomson's
model and its limitations. Rutherford's model and its limitations, Bohr's model and its
limitations, concept of shells and subshells, dual nature of matter and light, de Broglie's
relationship, Heisenberg uncertainty principle, concept of orbitals, quantum numbers, shapes
of s, p and d orbitals, rules for filling electrons in orbitals - Aufbau principle, Pauli's exclusion
principle and Hund's rule, electronic configuration of atoms, stability of half-filled and
completely filled orbitals.
Unit III: Classification of Elements and Periodicity in Properties 08 Periods
Significance of classification, brief history of the development of periodic table, modern periodic
law and the present form of periodic table, periodic trends in properties of elements -atomic
radii, ionic radii, inert gas radii, Ionization enthalpy, electron gain enthalpy, electronegativity,
valency. Nomenclature of elements with atomic number greater than 100.

Unit IV: Chemical Bonding and Molecular Structure 14 Periods

Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character
of covalent bond, covalent character of ionic bond, valence bond theory, resonance, geometry
of covalent molecules, VSEPR theory, concept of hybridization, involving s, p and d orbitals and
shapes of some simple molecules, molecular orbital theory of homonuclear diatomic
molecules(qualitative idea only), Hydrogen bond.

Unit VI: Chemical Thermodynamics 16 Periods

Concepts of System and types of systems, surroundings, work, heat, energy, extensive and
intensive properties, state functions.
First law of thermodynamics -internal energy and enthalpy, heat capacity and specific heat,
measurement of U and H, Hess's law of constant heat summation, enthalpy of bond
dissociation, combustion, formation, atomization, sublimation, phase transition, ionization,
solution and dilution. Second law of Thermodynamics (brief introduction)
Introduction of entropy as a state function, Gibb's energy change for spontaneous and non-
spontaneous processes, criteria for equilibrium.
Third law of thermodynamics (brief introduction).
Unit VII: Equilibrium 14 Periods

Equilibrium in physical and chemical processes, dynamic nature of equilibrium, law of mass
action, equilibrium constant, factors affecting equilibrium - Le Chatelier's principle, ionic
equilibrium- ionization of acids and bases, strong and weak electrolytes, degree of ionization,
ionization of poly basic acids, acid strength, concept of pH, hydrolysis of salts (elementary idea),
buffer solution, Henderson Equation, solubility product, common ion effect (with illustrative
examples).
Unit VIII: Redox Reactions 06 Periods
Concept of oxidation and reduction, redox reactions, oxidation number, balancing redox
reactions, in terms of loss and gain of electrons and change in oxidation number, applications
of redox reactions.

Unit XII: Organic Chemistry -Some Basic Principles and Techniques 14 Periods
General introduction, methods of purification, qualitative and quantitative analysis, classification
and IUPAC nomenclature of organic compounds. Electronic displacements in a covalent bond:
inductive effect, electromeric effect, resonance and hyper conjugation. Homolytic and heterolytic
fission of a covalent bond: free radicals, carbocations, carbanions, electrophiles and nucleophiles,
types of organic reactions.
 Unit XIII: Hydrocarbons 12 Periods

Classification of Hydrocarbons
Aliphatic Hydrocarbons:
Alkanes - Nomenclature, isomerism, conformation (ethane only), physical properties, chemical
reactions including free radical mechanism of halogenation, combustion and pyrolysis.
Alkenes - Nomenclature, structure of double bond (ethene), geometrical isomerism, physical
properties, methods of preparation, chemical reactions: addition of hydrogen, halogen, water,
hydrogen halides (Markovnikov's addition and peroxide effect), ozonolysis, oxidation, mechanism
of electrophilic addition.
Alkynes - Nomenclature, structure of triple bond (ethyne), physical properties, methods of
preparation, chemical reactions: acidic character of alkynes, addition reaction of - hydrogen,
halogens, hydrogen halides and water.
Aromatic Hydrocarbons:
Introduction, IUPAC nomenclature, benzene: resonance, aromaticity, chemical properties:
mechanism of electrophilic substitution. Nitration, sulphonation, halogenation, Friedel Craft's
alkylation and acylation, directive influence of functional group in monosubstituted benzene.
Carcinogenicity and toxicity.

PRACTICALS

Evaluation Scheme for Examination Marks

Volumetric Analysis 08
Salt Analysis 08
Content Based Experiment 06
Project Work 04
Class record and viva 04
Total 30

PRACTICAL SYLLABUS Total Periods: 60

Micro-chemical methods are available for several of the practical experiments, wherever possible such
techniques should be used.

A. Basic Laboratory Techniques

1. Cutting glass tube and glass rod
2. Bending a glass tube
3. Drawing out a glass jet
4. Boring a cork
B. Characterization and Purification of Chemical Substances

1. Determination of melting point of an organic compound.

2. Determination of boiling point of an organic compound.
3. Crystallization of impure sample of any one of the following: Alum, Copper Sulphate, Benzoic Acid.
C. Experiments based on pH

a) Any one of the following experiments:

• Determination of pH of some solutions obtained from fruit juices, solution of known and
varied concentrations of acids, bases and salts using pH paper or universal indicator.
• Comparing the pH of solutions of strong and weak acids of same concentration.
Study the pH change in the titration of a strong base using universal indicator.
b) Study the pH change by common-ion in case of weak acids and weak bases.
D. Chemical Equilibrium
One of the following experiments:
a) Study the shift in equilibrium between ferric ions and thiocyanate ions by increasing/decreasing
the concentration of either of the ions.
b) Study the shift in equilibrium between [Co(H2O)6]2+ and chloride ions by changing the
concentration of either of the ions.

E. Quantitative Estimation
i. Using a mechanical balance/electronic balance. ii.
Preparation of standard solution of Oxalic acid.
iii. Determination of strength of a given solution of Sodium hydroxide by titrating it against standard
solution of Oxalic acid.
iv. Preparation of standard solution of Sodium carbonate.
v. Determination of strength of a given solution of hydrochloric acid by titrating it against standard
Sodium Carbonate solution.
F. Qualitative Analysis

a) Determination of one anion and one cation in a given salt

Cations- Pb2+, Cu2+, As3+, Al3+, Fe3+, Mn2+, Ni2+, Zn2+, Co2+, Ca2+, Sr2+, Ba2+, Mg2+, NH4+

Anions – CO32-- , S2-, NO2- , SO32--, SO42-, NO3- , Cl- , Br-, I-, PO43- , , CH3COO- (Note: Insoluble salts
excluded)

b) Detection of -Nitrogen, Sulphur, Chlorine in organic compounds.

c) PROJECTS
Scientific investigations involving laboratory testing and collecting information from other
sources.
A few suggested Projects
• Checking the bacterial contamination in drinking water by testing sulphide ion
• Study of the methods of purification of water
 • Testing the hardness, presence of Iron, Fluoride, Chloride, etc., depending upon the regional
variation in drinking water and study of causes of presence of these ions above permissible
limit (if any).
• Investigation of the foaming capacity of different washing soaps and the effect of addition of
Sodium carbonate on it
• Study the acidity of different samples of tea leaves.
• Determination of the rate of evaporation of different liquids Study the effect of acids and
bases on the tensile strength of fibers.

• Study of acidity of fruit and vegetable juices.

Note: Any other investigatory project, which involves about 10 periods of work, can be chosen with the
approval of the teacher.

Practical Examination for Visually Impaired Students

Class XI
Note: Same Evaluation scheme and general guidelines for visually impaired students as given for Class XII may
be followed.
A. List of apparatus for identification for assessment in practicals (All experiments)
Beaker, tripod stand, wire gauze, glass rod, funnel, filter paper, Bunsen burner, test tube, test tube stand,
dropper, test tube holder, ignition tube, china dish, tongs, standard flask, pipette, burette, conical flask, clamp
stand, dropper, wash bottle
• Odour detection in qualitative analysis
• Procedure/Setup of the apparatus

B. List of Experiments A. Characterization and Purification of Chemical Substances

1. Crystallization of an impure sample of any one of the following: copper sulphate, benzoic acid
B. Experiments based on pH
1. Determination of pH of some solutions obtained from fruit juices, solutions of known and varied
concentrations of acids, bases and salts using pH paper
2. Comparing the pH of solutions of strong and weak acids of same concentration.
C. Chemical Equilibrium
1. Study the shift in equilibrium between ferric ions and thiocyanate ions by increasing/decreasing
the concentration of eitherions.
2. Study the shift in equilibrium between [Co(H2O)6]2+ and chloride ions by changing the
concentration of either of the ions.
D. Quantitative estimation
1. Preparation of standard solution of oxalic acid.
2. Determination of molarity of a given solution of sodium hydroxide by titrating it against standard
solution of oxalic acid.
E. Qualitative Analysis
1. Determination of one anion and one cation in a given salt
2. Cations - NH+4
Anions – (CO3)2-, S2-, (SO3)2-, Cl-, CH3COO-
(Note: insoluble salts excluded)
 3. Detection of Nitrogen in the given organic compound.
4. Detection of Halogen in the given organic compound.
Note: The above practicals may be carried out in an experiential manner rather than recording observations.
Prescribed Books:
1. Chemistry Part – I, Class-XI, Published by NCERT.
2. Chemistry Part – II, Class-XI, Published by NCERT.

CLASS XII (2023-24) (THEORY)

Time : 3 Hours 70 Marks

S.No. Title No. of Marks

Periods
1 Solutions 10 7
2 Electrochemistry 12 9
3 Chemical Kinetics 10 7
4 d -and f -Block Elements 12 7
5 Coordination Compounds 12 7
6 Haloalkanes and Haloarenes 10 6
7 Alcohols, Phenols and Ethers 10 6
8 Aldehydes, Ketones and Carboxylic Acids 10 8
9 Amines 10 6
10 Biomolecules 12 7
Total 70

Unit II: Solutions 10 Periods

Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in

liquids, solid solutions, Raoult's law, colligative properties - relative lowering of vapour pressure,
elevation of boiling point, depression of freezing point, osmotic pressure, determination of molecular
masses using colligative properties, abnormal molecular mass, Van't Hoff factor.

Unit III: Electrochemistry 12 Periods

Redox reactions, EMF of a cell, standard electrode potential, Nernst equation and its application to
chemical cells, Relation between Gibbs energy change and EMF of a cell, conductance in electrolytic
solutions, specific and molar conductivity, variations of conductivity with concentration, Kohlrausch's
Law, electrolysis and law of electrolysis (elementary idea), dry cell-electrolytic cells and Galvanic cells,
lead accumulator, fuel cells, corrosion.
Unit IV: Chemical Kinetics 10 Periods

Rate of a reaction (Average and instantaneous), factors affecting rate of reaction: concentration,
temperature, catalyst; order and molecularity of a reaction, rate law and specific rate constant,
integrated rate equations and half-life (only for zero and first order reactions), concept of collision
theory (elementary idea, no mathematical treatment), activation energy, Arrhenius equation.

Unit VIII: d and f Block Elements 12 Periods

General introduction, electronic configuration, occurrence and characteristics of transition metals,

general trends in properties of the first row transition metals – metallic character, ionization enthalpy,
oxidation states, ionic radii, colour, catalytic property, magnetic properties, interstitial compounds,
alloy formation, preparation and properties of K2Cr2O7 and KMnO4.

Lanthanoids - Electronic configuration, oxidation states, chemical reactivity and lanthanoid

contraction and its consequences.

Actinoids - Electronic configuration, oxidation states and comparison with lanthanoids.

Unit IX: Coordination Compounds 12 Periods

Coordination compounds - Introduction, ligands, coordination number, colour, magnetic properties

and shapes, IUPAC nomenclature of mononuclear coordination compounds. Bonding, Werner's
theory, VBT, and CFT; structure and stereoisomerism, importance of coordination compounds (in
qualitative analysis, extraction of metals and biological system).

Unit X: Haloalkanes and Haloarenes. 10 Periods

Haloalkanes: Nomenclature, nature of C–X bond, physical and chemical properties, optical rotation
mechanism of substitution reactions.

Haloarenes: Nature of C–X bond, substitution reactions (Directive influence of halogen in

monosubstituted compounds only).

Uses and environmental effects of - dichloromethane, trichloromethane, tetrachloromethane,

iodoform, freons, DDT.

Unit XI: Alcohols, Phenols and Ethers 10 Periods

Alcohols: Nomenclature, methods of preparation, physical and chemical properties (of primary
alcohols only), identification of primary, secondary and tertiary alcohols, mechanism of dehydration,
uses with special reference to methanol and ethanol.

Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of
phenol, electrophillic substitution reactions, uses of phenols.

Ethers: Nomenclature, methods of preparation, physical and chemical properties, uses.

 Unit XII: Aldehydes, Ketones and Carboxylic Acids 10 Periods

Aldehydes and Ketones: Nomenclature, nature of carbonyl group, methods of preparation, physical
and chemical properties, mechanism of nucleophilic addition, reactivity of alpha hydrogen in
aldehydes, uses.

Carboxylic Acids: Nomenclature, acidic nature, methods of preparation, physical and chemical
properties; uses.

Unit XIII: Amines 10 Periods

Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical

properties, uses, identification of primary, secondary and tertiary amines.

Diazonium salts: Preparation, chemical reactions and importance in synthetic organic chemistry.

Unit XIV: Biomolecules 12 Periods

Carbohydrates - Classification (aldoses and ketoses), monosaccahrides (glucose and fructose), D-L
configuration oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose,
glycogen); Importance of carbohydrates.

Proteins -Elementary idea of - amino acids, peptide bond, polypeptides, proteins, structure of proteins
- primary, secondary, tertiary structure and quaternary structures (qualitative idea only), denaturation
of proteins; enzymes. Hormones - Elementary idea excluding structure.

Vitamins - Classification and functions.

Nucleic Acids: DNA and RNA.

PRACTICALS

Evaluation Scheme for Examination Marks

Volumetric Analysis 08

Salt Analysis 08

Content Based Experiment 06

Project Work 04

Class record and viva 04

Total 30

PRACTICAL SYLLABUS 60Periods

Micro-chemical methods are available for several of the practical experiments. Wherever
possible, such techniques should be used.
A. Surface Chemistry
(a) Preparation of one lyophilic and one lyophobic sol

Lyophilic sol - starch, egg albumin and gum

Lyophobic sol - aluminium hydroxide, ferric hydroxide, arsenous sulphide.
(b) Dialysis of sol-prepared in (a) above.
(c) Study of the role of emulsifying agents in stabilizing the emulsion of different oils.

B. Chemical Kinetics
(a) Effect of concentration and temperature on the rate of reaction between Sodium Thiosulphate and
Hydrochloric acid.
(b) Study of reaction rates of any one of the following:
(i) Reaction of Iodide ion with Hydrogen Peroxide at room temperature using different
concentration of Iodide ions.
(ii) Reaction between Potassium Iodate, (KIO3) and Sodium Sulphite: (Na2SO3) using starch solution
as indicator (clock reaction).

C. Thermochemistry
Any one of the following experiments
i) Enthalpy of dissolution of Copper Sulphate or Potassium Nitrate.
ii) Enthalpy of neutralization of strong acid (HCI) and strong base (NaOH).
iii) Determination of enthaply change during interaction (Hydrogen bond formation) between Acetone
and Chloroform.

D. Electrochemistry

Variation of cell potential in Zn/Zn2+|| Cu2+/Cu with change in concentration of electrolytes (CuSO4 or
ZnSO4) at room temperature.

E. Chromatography
i) Separation of pigments from extracts of leaves and flowers by paper chromatography and
determination of Rf values.
ii) Separation of constituents present in an inorganic mixture containing two cations only (constituents
having large difference in Rf values to be provided).

F. Preparation of Inorganic Compounds

Preparation of double salt of Ferrous Ammonium Sulphate or Potash Alum. Preparation
of Potassium Ferric Oxalate.

G. Preparation of Organic Compounds

Preparation of any one of the following compounds
i) Acetanilide ii) Di -benzalAcetone iii) p-Nitroacetanilide iv) Aniline yellow or 2 - Naphthol Anilinedye.

H. Tests for the functional groups present in organic compounds:

Unsaturation, alcoholic, phenolic, aldehydic, ketonic, carboxylic and amino (Primary) groups.
 I. Characteristic tests of carbohydrates, fats and proteins in pure samples and their detection in
given foodstuffs.
J. Determination of concentration/ molarity of KMnO4 solution by titrating it against a standard
solution of:
i) Oxalic acid,
ii) Ferrous Ammonium Sulphate
(Students will be required to prepare standard solutions by weighing themselves). K.
Qualitative analysis
Determination of one cation and one anion in a given salt.
Cation : Pb2+, Cu2+ As3+, Aℓ3+, Fe3+, Mn2+, Zn2+, Cu2+, Ni2+, Ca2+, Sr2+, Ba2+, Mg2+, NH4+
Anions: (CO3)2-, S2-, (SO3)2-, (NO2)-, (SO4)2-, Cℓ-, Br-, I-, PO3-4, (C2O4)2-, CH3COO-,NO3-
(Note: Insoluble salts excluded)

PROJECT
Scientific investigations involving laboratory testing and collecting information from other sources A
few suggested Projects.

• Study of the presence of oxalate ions in guava fruit at different stages of ripening.
• Study of quantity of casein present in different samples of milk.
• Preparation of soybean milk and its comparison with the natural milk with respect to curd formation,
effect of temperature, etc.
• Study of the effect of Potassium Bisulphate as food preservative under various conditions (temperature,
concentration, time, etc.)
• Study of digestion of starch by salivary amylase and effect of pH and temperature on it.
• Comparative study of the rate of fermentation of following materials: wheat flour, gram flour, potato
juice, carrot juice, etc.
• Extraction of essential oils present in Saunf (aniseed), Ajwain (carum), Illaichi (cardamom).
• Study of common food adulterants in fat, oil, butter, sugar, turmeric power, chilli powder and pepper.
Note: Any other investigatory project, which involves about 10 periods of work, can be chosen with the
approval of the teacher.

Practical Examination for Visually Impaired Students of Classes XI and XII Evaluation Scheme

Time Allowed: Two hours Max. Marks:30

Identification/Familiarity with the apparatus 5 marks

Written test (based on given/prescribed practicals) 10 marks

Practical Record 5 marks

Viva 10 marks

Total 30 marks
 General Guidelines
• The practical examination will be of two hour duration.
• A separate list of ten experiments is included here.
• The written examination in practicals for these students will be conducted at the time of practical
examination of all other students.
• The written test will be of 30 minutes duration.
• The question paper given to the students should be legibly typed. It should contain a total of 15
practical skill based very short answer type questions. A student would be required to answer any 10
questions.
• A writer may be allowed to such students as per CBSE examination rules.
• All questions included in the question papers should be related to the listed practicals. Every question
should require about two minutes to be answered.
• These students are also required to maintain a practical file. A student is expected to record at least
five of the listed experiments as per the specific instructions for each subject. These practicals should
be duly checked and signed by the internal examiner.
• The format of writing any experiment in the practical file should include aim, apparatus required,
simple theory, procedure, related practical skills, precautions etc.
• Questions may be generated jointly by the external/internal examiners and used for assessment.
• The viva questions may include questions based on basic theory/principle/concept,
apparatus/materials/ chemicals required, procedure, precautions, sources of error etc.

A. Items for Identification/Familiarity of the apparatus for assessment in practical (All experiments)

Beaker, glass rod, tripod stand, wire gauze, Bunsen burner, Whatman filter paper, gas jar, capillary
tube, pestle and mortar, test tubes, tongs, test tube holder, test tube stand, burette, pipette, conical
flask, standard flask, clamp stand, funnel, filter paper
Hands-on Assessment
• Identification/familiarity with the apparatus
• Odour detection in qualitative analysis

B. List of Practicals
The experiments have been divided into two sections: Section A and Section B. The experiments
mentioned in Section B are mandatory.

SECTION- A

A Surface Chemistry
(1) Preparation of one lyophilic and one lyophobic
sol Lyophilic sol - starch, egg albumin and gum
(2) Preparation of one lyophobic sol Lyophobic sol
– Ferric hydroxide B Chromatography
(1) Separation of pigments from extracts of leaves and flowers by paper chromatography and
determination of Rf values (distance values may be provided).
C Tests for the functional groups present in organic compounds:
(1) Alcoholic and Carboxylic groups.
 (2) Aldehydic and Ketonic
D Characteristic tests of carbohydrates and proteins in the given foodstuffs. E
Preparation of Inorganic Compounds- Potash Alum

SECTION-B (Mandatory)
F Quantitative analysis
(1) (a) Preparation of the standard solution of Oxalic acid of a given volume
(b) Determination of molarity of KMnO4 solution by titrating it against a standard solution of
Oxalic acid.
(2) The above exercise [F 1 (a) and (b)] to be conducted using Ferrous ammonium sulphate (Mohr's
salt)

G Qualitative analysis:
(1) Determination of one cation and one anion in a given salt.
Cation –NH4+
Anions – CO32-, S2-, SO32-, Cl-, CH3COO-
(Note: Insoluble salts excluded)
Note: The above practicals may be carried out in an experiential manner rather than recording
observations.
Prescribed Books:
1. Chemistry Part -I, Class-XII, Published by NCERT.
2. Chemistry Part -II, Class-XII, Published by NCERT.

CHEMISTRY (Code No. 043) QUESTION PAPER DESIGN CLASSES –XI and XII (2023-24)
S Domains Total Marks %
1 Remembering and Understanding: 28 40
Exhibit memory of previously learned material by recalling facts, terms,
basic concepts and answers. Demonstrate understanding of facts and
ideas by organizing, comparing, translating, interpreting, giving
descriptions and stating main ideas.
2 Applying: 21 30
Solve problems to new situations by applying acquired knowledge, facts,
techniques and rules in a different way.
3 Analysing, Evaluating and Creating: 21 30
Examine and break information into parts by identifying motives or causes.
Make inferences and find evidence to support generalizations. Present and
defend opinions by making judgments about information, validity of ideas
or quality of work based on a set of criteria.
Compile information together in a different way by combining elements in
a new pattern or proposing alternative solutions.

1. No chapter wise weightage. Care to be taken to cover all the chapters.

2. Suitable internal variations may be made for generating various templates. Choice(s):

• There will be no overall choice in the question paper.

• However, 33% internal choices will be given in all the sections.