Scribd
Upload
113 views1 page

Wire Rope Report

This mechanical testing report from Bureau Veritas summarizes tensile testing of 5 samples of wire rope supplied by BST Group. The wire ropes were tested according to Australian standards AS 1391-2007 and AS 3569-2010. Test results showed the minimum breaking loads of each wire rope size met or exceeded the required minimums in AS 3569-2010. All wire ropes failed through the rope material as expected. The report concludes the supplied samples comply with strength requirements for the specified wire rope class.

Uploaded by

rizwan qadeer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views1 page

Wire Rope Report

This mechanical testing report from Bureau Veritas summarizes tensile testing of 5 samples of wire rope supplied by BST Group. The wire ropes were tested according to Australian standards AS 1391-2007 and AS 3569-2010. Test results showed the minimum breaking loads of each wire rope size met or exceeded the required minimums in AS 3569-2010. All wire ropes failed through the rope material as expected. The report concludes the supplied samples comply with strength requirements for the specified wire rope class.

Uploaded by

rizwan qadeer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Bureau Veritas 35-37 STIRLING STREET THEBARTON, SA 5031 P.

O BOX
338, TORRENSVILLE PLAZA,SA. 5031
A.B.N. 86 000 928 816
Tel: (08) 8416 5260
Fax: (08) 8260 2760
Asset Integrity and Reliability Services Australia Pty Ltd

MECHANICAL TESTING REPORT

BST Group TEST DATE: 5 October 2017


6 Allan Drive CLIENT REF: Request
Mount Gambier SA 5290 PAGE NO: 1 of 1

REPORT NO: 17-2837848-1

TEST DETAILS

TEST SPECIFICATION: AS 1391-2007 & AS 3569-2010


SAMPLE DESCRIPTION: 5 off Supplied Wire Rope - Galvanised Fibre Cored un-lubed G1570 6 x 24,
sizes supplied: 8mm, 10mm, 12mm, 14mm 16mm

TENSILE TESTING RESULTS

Sample ID/ Minimum breaking Load Ultimate Failure Load Failure Mode
Size (mm) AS 3569 Table C3 of supplied samples
(kN) (kN)

Wire Rope – 8mm 28.7 33.5 Failed through rope material

Wire Rope – 10mm 44.9 52.1 Failed through rope material

Wire Rope – 12mm 64.0 68.9 Failed through rope material

Wire Rope – 14mm 88.0 101.4 Failed through rope material

Wire Rope – 16mm 115.0 128.5 Failed through clamp

REMARKS:
The supplied samples comply with the minimum tensile property requirements for AS 3569-2010 Table
C3: Class 6 x 24 fibre cored.

TESTING OFFICER(s): Enrique Laurente


Mechanical testing officer(s)

AUTHORISED
Accredited for compliance with ISO/IEC 17025.
SIGNATORY
The results of the tests, calibrations and/or measurements included in
this document are traceable to Australian/national standards.

Accreditation No. 1267

Bureau Veritas

Name PAUL HOSKING Date 05-10-2017

Reviewed: MONTY LUKE

This report was prepared by Bureau Veritas expressly for the customer as nominated on the front cover. Neither Bureau Veritas nor any person acting in its behalf (a) makes
any warranty, express or implied, with respect to the use of any information or methods disclosed in this report or (b) assumes any liability with respect to the use of any
information or methods disclosed in this report. Any recipient of this document, by their acceptance or use of this document, releases Bureau Veritas and their affiliates from
any liability for direct, indirect, consequential or special loss or damage whether arising in contract, warranty, express or implied, tort or otherwise, and irrespective of fault,
negligence and strict liability. Email copies of this report are not official unless signed by Bureau Veritas and are not to be modified in any manner without the express written
consent of Bureau Veritas. Samples will be stored for thirty days.

You might also like