SA5000

Flow sensor
SAD10XDBFRKG/US-100

1 LEDs Display unit / Switching status

2 alphanumeric display 4-digit red/green
3 Programming buttons
4 upper part of the housing can be rotated 345°

Product characteristics
Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1
Process connection threaded connection M18 x 1,5 Internal thread
Application
System gold-plated contacts
Media water; glycol solutions; air; oils
low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C)
Note on media
high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
Medium temperature [°C] -20...90
Pressure rating [bar] 100
Pressure rating [Mpa] 10
MAWP (for applications
[bar] 100
according to CRN)

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100

Electrical data
Operating voltage [V] 18...30 DC
Current consumption [mA] < 100
Protection class III
Reverse polarity protection yes
Power-on delay time [s] 10
Inputs / outputs
Number of inputs and outputs Number of digital outputs: 2; Number of analog outputs: 1
Outputs
Total number of outputs 2
Output signal switching signal; analog signal; frequency signal; IO-Link; (configurable)
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / closed; (configurable)
Max. voltage drop switching
[V] 2.5
output DC
Permanent current rating of
[mA] 250
switching output DC
Number of analog outputs 1
Analog current output [mA] 4...20; (scalable)
Max. load [Ω] 350
Short-circuit protection yes
Type of short-circuit
yes (non-latching)
protection
Overload protection yes
Frequency of the output [Hz] 0...1000
Measuring/setting range
Probe length L [mm] 45
relative; absolutely liquid; absolutely gaseous;
Operating mode
(absolute: reference measurement recommended)
Note on factory setting Operating mode: relative
Temperature monitoring
Measuring range [°C] -20...90
Resolution [°C] 0.2
Liquid media - absolute operating mode
Setting range [m/s] 0.04...3
Greatest sensitivity [m/s] 0.04...3
Liquid media - relative operating mode
Setting range [m/s] 0.04...6
Greatest sensitivity [m/s] 0.04...3
Gases - operating mode "absolute"
Setting range [m/s] 0...100
Greatest sensitivity [m/s] 30...100

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100

Gases - operating mode "relative"

Setting range [m/s] 0...200
Greatest sensitivity [m/s] 30...100
Accuracy / deviations
Temperature drift [cm/s x 1/K] 0,003 m/s x 1/K (< 20 °C; > 70 °C)
Max. temperature gradient of
[K/min] 100
medium
Absolute operating mode
Repeatability 0,05 m/s; (water; Flow velocity: 0,05...3 m/s)
Relative operating mode
± (7 % MW + 2 % MEW); (for relative mode in the range of maximum
sensitivity under the following conditions:; water: 20...70 °C; inlet
Accuracy
length: 1.5 m; DN25 (DIN 2448); mounting position according to
instructions; Accuracy can differ for other media and mounting positions.)
Repeatability 0,05 m/s; (water; Flow velocity: 0,05...3 m/s)
Temperature monitoring
Temperature drift ± 0,005 K/°C
Accuracy [K] ± 0,3 / ± 1; (water; Flow velocity: 0,3...3 m/s / air; Flow velocity: > 10 m/s)
Reaction times
Response time [s] 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Temperature monitoring
Dynamic response T05 / T09 [s] 1,5 (T09); (water; Flow velocity: 0,3...3 m/s)
Software / programming
hysteresis / window; normally open / closed; switching logic; current/
Parameter setting options frequency output; medium selection; Damping; Teach function; display can be
rotated and switched off; standard unit of measurement; process value color
Interfaces
Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode yes
Required master port class A
Process data analog 2
Process data binary 2
Min. process cycle time [ms] 3
Type of operation DeviceID
Factory setting / ModE = (REL) 533
Supported DeviceIDs
ModE = (LIQU) 540
ModE = (GAS) 547
Operating conditions
Ambient temperature [°C] -40...80
Storage temperature [°C] -40...100
Protection IP 65; IP 67

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100

Tests / approvals
EMC DIN EN 60947-5-9
Shock resistance DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance DIN EN 60068-2-6 20 g (10...2000 Hz)
MTTF [years] 132
UL approval UL approval number I003
Mechanical data
Weight [g] 314
Material stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30
Materials (wetted parts) stainless steel (1.4404 / 316L); Gasket: FKM
Process connection threaded connection M18 x 1,5 Internal thread
Displays / operating elements
Display unit 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³)
Display Switching status 2 x LED, yellow
Measured values alphanumeric display, red/green 4-digit
Remarks
MW = Measured value
Remarks
MEW = Final value of the measuring range
Pack quantity 1 pcs.
Electrical connection
Connector: 1 x M12; coding: A; Contacts: gold-plated

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SA5000-01 — 26.04.2021 —
SA5000
Flow sensor
SAD10XDBFRKG/US-100

Connection

Colors to DIN EN 60947-5-2

OUT1:
- Switching output Volumetric flow quantity monitoring
- Frequency output Volumetric flow quantity monitoring
- IO-Link
OUT2:
- Switching output Volumetric flow quantity monitoring
- Switching output Temperature monitoring
- analog output Volumetric flow quantity monitoring
- analog output Temperature monitoring
- Frequency output Volumetric flow quantity monitoring
- Frequency output Temperature monitoring
- Input External Teach
Core colors :
BK = black
BN = brown
BU = blue
WH = white

ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SA5000-01 — 26.04.2021 —