Product data sheet XS8C4A1PCG13
Characteristics Inductive proximity sensors XS, inductive
sensor XS8 40x40x117, PBT, Sn20 mm,
12...48 VDC, terminals
Main
Range of produc Telemecanique Inductive proximity sensors XS
Series name General purpose
Sensor type Inductive proximity sensor
Device application Mobile equipment
Sensor name XS8
Sensor design Form 40 x 40 x 117
Size 117 mm
Body type Fixed
Detector flush mounting Flush mountable
acceptance
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Material Plastic
Enclosure material PBT
Type of output signal Discrete
Wiring technique 4-wire
[Sn] nominal sensing 20 mm
distance
Discrete output function 1 NO + 1 NC
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Output circuit type DC
Discrete output type PNP
Electrical connection Screw-clamp terminals, 4 x 1.5 mm²
[Us] rated supply 12...48 V DC with reverse polarity protection
voltage
Neither TMSS Holding nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Switching capacity in <= 200 mA with overload and short-circuit protection
mA
IP degree of protection IP67 conforming to IEC 60529
IP65 conforming to IEC 60529
IP69K conforming to DIN 40050
Complementary
Safety level SIL 2 conforming to EN/IEC 61508
PL = d conforming to EN/ISO 13849-1
SILCL 2 conforming to IEC 62061
Safety reliability data MTTFd = 1546 years
PFHd = 7.4E-8 1/h
SFF = 92 %
DC = 75 % with appropriate safety controller
Detection face 5 positions turret head
Front material PBT
Operating zone 0…16 mm
Differential travel 3...15% of Sr
Repeat accuracy <= 3% of Sr
Cable entry number 1 tapped entry for Pg 13.5 cable gland
Status LED Supply on: 1 LED (green)
Output state: 1 LED (yellow)
Supply voltage limits 10…58 V DC
Switching frequency <= 300 Hz
Maximum voltage drop <2 V (closed)
Current consumption 0...15 mA no-load
Maximum delay first up 7.5 ms
Jan 29, 2024
1
Maximum delay response 1.2 ms
Maximum delay recovery 1.8 ms
Marking CE
Height 40 mm
Length 40 mm
Width 117 mm
Net weight 0.244 kg
Environment
Product certifications CSA[RETURN]UL[RETURN]E2[RETURN]CCC[RETURN]TÜV
Ambient air temperature for operation -25…70 °C
Ambient air temperature for storage -40…85 °C
Vibration resistance 25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
Shock resistance 50 gn for 11 ms conforming to EN 60068-2-27
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 4.5 cm
Package 1 Width 4.5 cm
Package 1 Length 14.3 cm
Package 1 Weight 250.0 g
Unit Type of Package 2 S02
Number of Units in Package 2 28
Package 2 Height 15.0 cm
Package 2 Width 30.0 cm
Package 2 Length 40.0 cm
Package 2 Weight 7.411 kg
Unit Type of Package 3 P06
Number of Units in Package 3 448
Package 3 Height 80.0 cm
Package 3 Width 80.0 cm
Package 3 Length 60.0 cm
Package 3 Weight 127.78 kg
Offer Sustainability
Sustainable offer status Green Premium product
Environmental Disclosure
Product Environmental Profile
Circularity Profile No need of specific recycling operations
California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl
phthalate (DINP), which is known to the State of California to cause cancer,
and Di-isodecyl phthalate (DIDP), which is known to the State of California
to cause birth defects or other reproductive harm. For more information go to
[Link]
For all Reach Rohs enquiries contact us at sustainability@[Link]
Contractual warranty
Warranty 18 months
2
Product data sheet XS8C4A1PCG13
Dimensions Drawings
Dimensions
(1) : Pg 13.5 cable gland.
(2) : 2 holes Ø 5,45 mm / Ø 0.21 in. Tightening torque: < 1,5 Nm / < 13.3 Ib-in.
(3) : 3 screws M3,5. Tightening torque: < 1,2 Nm / < 10.6 Ib-in.
(4) : 2 alongated holes 5,4 x 7,4 mm / 0.21 x 0.29 in. Tightening torque: < 1,5 Nm / < 13.3 Ib-in".
3
Product data sheet XS8C4A1PCG13
Mounting and Clearance
Mounting
Head Positions
Setting-up Precautions
Minimum Mounting Distances (mm)
Side by Side
e (1) ≥ 80
Face to Face
e (2) ≥ 160
Facing a Metal Object
e (3) ≥ 60
4
Product data sheet XS8C4A1PCG13
Connections and Schema
Wiring Schemes
4-Wire DC
SIL 2 Wiring Scheme
With Preventa XPSMF40 Safety PLC
SFF : (Safe Failure Fraction): 92,68 %
DC : (Diagnosis Coverage): 75,8 %
