Scribd
Upload
48 views4 pages

LL 890

This document describes a structural analysis of a frameless glass panel with the following key details: 1) The glass panel is a quadrangle shape with dimensions of 1350mm by 5000mm and fixed edge supports. 2) The glass is made of two packages with different material properties and a 16mm intermediate space. 3) A concentrated load of 890N is applied at x=675mm, y=1100mm. 4) The analysis found a maximum deflection of 8.75mm and maximum principal stress of 9.11N/mm^2.

Uploaded by

Alex Robin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views4 pages

LL 890

This document describes a structural analysis of a frameless glass panel with the following key details: 1) The glass panel is a quadrangle shape with dimensions of 1350mm by 5000mm and fixed edge supports. 2) The glass is made of two packages with different material properties and a 16mm intermediate space. 3) A concentrated load of 890N is applied at x=675mm, y=1100mm. 4) The analysis found a maximum deflection of 8.75mm and maximum principal stress of 9.11N/mm^2.

Uploaded by

Alex Robin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Project: FRAMELESS2 GLASS - GLASS 1 16-02-2024 Page: 1

SJ MEPLA Calculation protocol:

Geometry:

Basic form: quadrangle


Corner x y
mm mm
1 0.00 0.00
2 1350.00 0.00
3 1350.00 5000.00
4 0.00 5000.00

Supports:

Edge supports:
from-to kind of supports
1 2 w,phi,theta : fixed - u,v : free (simply supported and clamped)
3 4 w,phi,theta : fixed - u,v : free (simply supported and clamped)

Spring supports:
----- position ---- ------------ rigidity ---------
Package layer x y z Cx Cy Cz
mm mm mm N/mm N/mm N/mm
1 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
1 1 1350.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000
2 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
2 1 1350.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000

This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: FRAMELESS2 GLASS - GLASS 1 16-02-2024 Page: 2

Layers:

Mechanical properties:
Package layer e-mod. poiss thickn. density alpha t dT prestressing
N/mm² - mm kg/m³ 1/K K N/mm²
2 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
2 2 2.70 0.50 1.52 1070.00 8.0000e-005 0.00 0.00
2 1 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
1 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00
1 2 2.70 0.50 1.52 1070.00 8.0000e-005 0.00 0.00
1 1 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 37.00

Intermediate pane space:


Package thick int.-pressure dT gamma
from-to mm N/mm² C 1/K
1 2 16.00 1.01000e-001 0.00 3.67400e-003

External pressure:
pressure dH (difference of height)
N/mm² m
1.01000e-001 0.0

Loads:

Concentrated loads:
Package x y Fx Fy Fz lx ly
mm mm N N N mm mm
1 675.00 1100.00 0.00 0.00 890.00 100.00 100.00
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: FRAMELESS2 GLASS - GLASS 1 16-02-2024 Page: 3

Face loads:
(constant distributed):
Package pressure
N/mm²
2 0.00000e+000
1 0.00000e+000

Calculation approaches:

small deflections, linear


static calculation

Calculation results:

Minimum and maximum displacements (at nodes):


- position- displacement
Package x y w
mm mm mm
2 0.00 0.00 0.00 (min)
1350.00 2500.00 7.25 (max)
1 0.00 0.00 0.00 (min)
675.00 1500.00 8.75 (max)

Max principal stress (in gaussian points):


Package layer x y stress

This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: FRAMELESS2 GLASS - GLASS 1 16-02-2024 Page: 4

mm mm N/mm²
2 3 1012.50 56.35 3.77
2 1 1012.50 56.35 4.02
1 3 751.07 56.35 8.66
1 1 751.07 56.35 9.11

Intermediate pane space:


Package pressure
from-to N/mm²
1 2 1.01062077e-001

Springs: (order as defined above)


Package layer u v w Fx Fy Fz
mm mm mm N N N
1 1 0.00 0.00 0.00 0.00 0.00 0.00
1 1 -0.00 0.00 0.00 0.00 0.00 0.00
2 1 -0.00 0.00 0.00 -0.00 0.00 0.00
2 1 -0.00 0.00 0.00 0.00 0.00 0.00

This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.

You might also like