Scribd
Upload
89 views1 page

Motor Specs

This document provides specifications for the DC-Micromotors Series 2842 motor. It lists technical details such as nominal voltage, output power, efficiency, no-load speed, stall torque, thermal resistance, operating temperature range, shaft specifications, housing material, and recommended speed, torque, and current values. The motor is compatible with various gearheads and encoders and has a graphite commutation and power output of 10.5 watts.

Uploaded by

Daniel Situmeang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views1 page

Motor Specs

This document provides specifications for the DC-Micromotors Series 2842 motor. It lists technical details such as nominal voltage, output power, efficiency, no-load speed, stall torque, thermal resistance, operating temperature range, shaft specifications, housing material, and recommended speed, torque, and current values. The motor is compatible with various gearheads and encoders and has a graphite commutation and power output of 10.5 watts.

Uploaded by

Daniel Situmeang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

DC-Micromotors 10.

5 Watt
Graphite Commutation For combination with:
Gearheads: 23/1, 26/1, 30/1, 32PG, 38/1, 38/2, 38/3
Encoders: HE, 5500, 5540

Series 2842 ... C See beginning of the Motor Section for Ordering Information
2842 S 006 C 012 C 024 C 028 C 036 C
1 Nominal voltage UN 6 12 24 28 36 Volt
2 Terminal resistance R ± 12% 1.6 5.3 21.0 28.5 46.0 Ω
3 Output power P2 max. 5.33 6.50 6.56 6.57 6.74 W
4 Efficiency η max. 72 74 74 74 74 %

5 No-load speed no ± 12% 5,100 5,100 5,000 5,100 5,200 rpm


6 No-load current (with shaft ø 0.12 in) Io ± 50% 0.100 0.050 0.025 0.022 0.017 A
7 Stall torque MH 5.65 6.88 7.09 6.98 7.01 oz-in
8 Friction torque MR 0.156 0.156 0.156 0.156 0.156 oz-in

9 Speed constant kn 873 435 213 186 148 rpm/V


10 Back-EMF constant kE 1.150 2.300 4.700 5.370 6.770 mV/rpm
11 Torque constant kM 1.544 3.115 6.344 7.265 9.162 oz in /A
12 Current constant kI 0.648 0.321 0.158 0.138 0.109 A/oz-in

13 Slope of n-M curve ∆n/∆M 903 741 705 731 742 rpm/oz-in
14 Rotor inductance L 145 580 2,500 3,200 5,000 µH
15 Mechanical time constant τm 13 15 15 15 15 ms
16 Rotor inertia J 1.374 ⋅ 10-4 1.983 ⋅ 10-4 1.983 ⋅ 10-4 1.983 ⋅ 10-4 1.983 ⋅ 10-4 oz-in-sec2
17 Angular acceleration α max. 41 36 35 36 36 ⋅103rad/s2

18 Thermal resistance Rth 1 / Rth 2 2 / 16 ºC/W


19 Thermal time constant τ w1 / τ w2 8 / 831 s
20 Operating temperature range:
– motor – 30 to +125 (– 22 to +257) ºC (°F)
– rotor, max. permissible +125 (+257) ºC (°F)

21 Shaft bearings ball bearings, preloaded


22 Shaft load max.:
– with shaft diameter 0.1181 in
– radial at 3,000 rpm (0.12 in from bearing) 72 oz
– axial at 3,000 rpm 7.2 oz
– axial at standstill 72 oz
23 Shaft play:
– radial ≤ 0.0006 in
– axial = 0 in

24 Housing material steel, zinc galvanized and passivated


25 Weight 4.66 oz

For notes on technical data refer to “Technical Information“. Specifications subject to change without notice. MME0402
26 Direction of rotation clockwise, viewed from the front face

Recommended values
27 Speed up to ne max. 5,000 5,000 5,000 5,000 5,000 rpm
28 Torque up to 1) Me max. 2.832 2.832 2.832 2.832 2.832 oz-in
29 Current up to (thermal limits) Ie max. 1.550 0.870 0.430 0.370 0.290 A

1)
thermal resistance Rth 2 by 40% reduced

MicroMo Electronics, Inc. · 14881 Evergreen Avenue · Clearwater · FL 33762-3008 · Toll-Free: (800) 807-9166 · Fax: (727) 573-5918 · [email protected] · www.micromo.com

You might also like