®

[Link]
2 NINGBO NICHE TOOLS CO. LTD
 INDEX
TAPS FOR CARBON STEEL&ALLOY STEEL

X20 FORMING TAPS ........................................................................................................... 4

X20S FORMING TAPS WITH SHORT CHAMFER ........................................................... 8
X21 FORMING TAPS ........................................................................................................... 10
X21S FORMING TAPS WITH SHORT CHAMFER ........................................................... 13
JX10 FORMING TAPS ......................................................................................................... 15
JX10 FORMING TAPS WITH FINE THREAD................................................................... 18
JX10 FORMING TAPS WITH LONG NECK ..................................................................... 21
JX10 FORMING TAPS WITH LH THREAD....................................................................... 23
JX10 FORMING TAPS WITH LONG SHANK .................................................................. 26
X20 SPIRAL FLUTED TAPS................................................................................................. 32
SFT45 SPIRAL FLUTED TAPS WITH HIGH SPIRAL ........................................................ 33
SFT SPIRAL FLUTED TAPS WITH FINE THREAD ........................................................... 35
SFT SPIRAL FLUTED TAPS WITH LONG SHANK........................................................... 36
DS SPIRAL FLUTED TAPS ................................................................................................... 41
X20 SPIRAL POINTED TAPS .............................................................................................. 42
SPIRAL POINTED TAPS....................................................................................................... 43
SPIRAL POINTED TAPS WITH FINE THREAD ................................................................ 45
SPIRAL POINTED TAPS WITH LONG SHANK................................................................ 46
HHS SPIRAL POINTED TAPS FOR DIFFICULT TO MACHINE MATERIALS .............. 51
X20-RLT SPIRAL POINTED TAPS ...................................................................................... 52

[Link] 3
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:14 K
Lc

d
X20-NRT Lc
Type:13 K fl Ln
L
Lk

X20 Forming taps

d
fl Ln Lk
Type:5

K
Lc
L

d
2.5P chamfers,for blind hole
fl Ln Lk
4P chamfers,for through hole L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance CPM M ISO DIN
◎ Suitable for carbon steel, alloy steel below 35HRC processing 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2004070P M4×0.7 6HX 4P 13 63 9 12 4.5 3.4 6
X2004070B M4×0.7 6HX 2.5P 14 63 9 12 4.5 3.4 6
X2005080P M5×0.8 6HX 4P 13 70 10 15 6 4.9 8
X2005080B M5×0.8 6HX 2.5P 14 70 10 15 6 4.9 8
X2006100P M6×1 6HX 4P 13 80 10 20 6 4.9 8
X2006100B M6×1 6HX 2.5P 14 80 10 20 6 4.9 8
X2007100P M7×1 6HX 4P 13 80 10 20 7 5.5 8
X2007100B M7×1 6HX 2.5P 14 80 10 20 7 5.5 8
X2008125P M8×1.25 6HX 4P 5 90 13 22 8 6.2 9
X2008125B M8×1.25 6HX 2.5P 5 90 13 22 8 6.2 9
X2008100P M8×1 6HX 4P 5 90 13 22 8 6.2 9
X2008100B M8×1 6HX 2.5P 5 90 13 22 8 6.2 9
X2010150P M10×1.5 6HX 4P 5 100 15 24 10 8 11
X2010150B M10×1.5 6HX 2.5P 5 100 15 24 10 8 11
X2010125P M10×1.25 6HX 4P 5 100 15 24 10 8 11

4 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:14 K
Lc

X20-NRT

d
Type:13 K fl Ln Lk
Lc L
X20 Forming taps

d
fl Ln Lk
Type:5

K
Lc
L
2.5P chamfers,for blind hole

d
4P chamfers,for through hole fl Ln Lk
L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing CPM M ISO DIN
6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2010125B M10×1.25 6HX 2.5P 5 100 15 24 10 8 11
X2010100P M10×1 6HX 4P 5 100 15 24 10 8 11
X2010100B M10×1 6HX 2.5P 5 100 15 24 10 8 11
X2012175P M12×1.75 6HX 4P 5 110 17 32 9 7 10
X2012175B M12×1.75 6HX 2.5P 5 110 17 32 9 7 10
X2012150P M12×1.5 6HX 4P 5 110 17 32 9 7 10
X2012150B M12×1.5 6HX 2.5P 5 110 17 32 9 7 10
X2012125P M12×1.25 6HX 4P 5 110 17 32 9 7 10
X2012125B M12×1.25 6HX 2.5P 5 110 17 32 9 7 10
X2012100P M12×1 6HX 4P 5 110 17 32 9 7 10
X2012100B M12×1 6HX 2.5P 5 110 17 32 9 7 10
X2014200P M14×2 6HX 4P 5 110 20 33 11 9 12
X2014200B M14×2 6HX 2.5P 5 110 20 33 11 9 12
X2014150P M14×1.5 6HX 4P 5 110 20 33 11 9 12
X2014150B M14×1.5 6HX 2.5P 5 110 20 33 11 9 12
X2014125P M14×1.25 6HX 4P 5 110 20 33 11 9 12
X2014125B M14×1.25 6HX 2.5P 5 110 20 33 11 9 12
X2014100P M14×1 6HX 4P 5 110 20 33 11 9 12
X2014100B M14×1 6HX 2.5P 5 110 20 33 11 9 12

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 5
 TAPS FOR CARBON STEEL & ALLOY STEEL

X20-NRT
Type:5

K
Lc

X20 Forming taps

d
fl Ln Lk
L
2.5P chamfers,for blind hole
4P chamfers,for through hole

◎ High-speed steel material

◎ Complex coating, excellent wear resistance ISO
◎ Suitable for carbon steel, alloy steel below 35HRC processing
CPM M 6HX
DIN

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2016200P M16×2 6HX 4P 5 110 20 34 12 9 12
X2016200B M16×2 6HX 2.5P 5 110 20 34 12 9 12
X2016150P M16×1.5 6HX 4P 5 110 20 34 12 9 12
X2016150B M16×1.5 6HX 2.5P 5 110 20 34 12 9 12
X2016125P M16×1.25 6HX 4P 5 110 20 34 12 9 12
X2016125B M16×1.25 6HX 2.5P 5 110 20 34 12 9 12
X2016100P M16×1 6HX 4P 5 110 20 34 12 9 12
X2016100B M16×1 6HX 2.5P 5 110 20 34 12 9 12
X2018250P M18×2.5 6HX 4P 5 125 25 36 14 11 14
X2018250B M18×2.5 6HX 2.5P 5 125 25 36 14 11 14
X2018200P M18×2 6HX 4P 5 125 25 36 14 11 14
X2018200B M18×2 6HX 2.5P 5 125 25 36 14 11 14
X2018150P M18×1.5 6HX 4P 5 125 25 36 14 11 14
X2018150B M18×1.5 6HX 2.5P 5 125 25 36 14 11 14
X2020250P M20×2.5 6HX 4P 5 140 25 44 16 12 15
X2020250B M20×2.5 6HX 2.5P 5 140 25 44 16 12 15
X2020200P M20×2 6HX 4P 5 140 25 44 16 12 15
X2020200B M20×2 6HX 2.5P 5 140 25 44 16 12 15
X2020150P M20×1.5 6HX 4P 5 140 25 44 16 12 15
X2020150B M20×1.5 6HX 2.5P 5 140 25 44 16 12 15
X2022250P M22×2.5 6HX 4P 5 140 25 44 18 14.5 17
X2022250B M22×2.5 6HX 2.5P 5 140 25 44 18 14.5 17
X2022200P M22×2 6HX 4P 5 140 25 44 18 14.5 17
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

6 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

X20-NRT Type:5

K
Lc

X20 Forming taps

d
fl Ln Lk
2.5P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
CPM M ISO DIN
◎ Suitable for carbon steel, alloy steel below 35HRC processing 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2022200B M22×2 6HX 2.5P 5 140 25 44 18 14.5 17
X2022150P M22×1.5 6HX 4P 5 140 25 44 18 14.5 17
X2022150B M22×1.5 6HX 2.5P 5 140 25 44 18 14.5 17
X2024300P M24×3 6HX 4P 5 160 30 48 18 14.5 17
X2024300B M24×3 6HX 2.5P 5 160 30 48 18 14.5 17
X2024250P M24×2.5 6HX 4P 5 160 30 48 18 14.5 17
X2024250B M24×2.5 6HX 2.5P 5 160 30 48 18 14.5 17
X2024200P M24×2 6HX 4P 5 160 30 48 18 14.5 17
X2024200B M24×2 6HX 2.5P 5 160 30 48 18 14.5 17
X2027250P M27×2.5 6HX 4P 5 160 30 48 20 16 19
X2027250B M27×2.5 6HX 2.5P 5 160 30 48 20 16 19
X2027200P M27×2 6HX 4P 5 160 30 48 20 16 19
X2027200B M27×2 6HX 2.5P 5 160 30 48 20 16 19
X2030350P M30×3.5 6HX 4P 5 180 35 53 22 18 21
X2030350B M30×3.5 6HX 2.5P 5 180 35 53 22 18 21
X2030300P M30×3 6HX 4P 5 180 35 53 22 18 21
X2030300B M30×3 6HX 2.5P 5 180 35 53 22 18 21
X2030250P M30×2.5 6HX 4P 5 180 35 53 22 18 21
X2030250B M30×2.5 6HX 2.5P 5 180 35 53 22 18 21
X2030200P M30×2 6HX 4P 5 180 35 53 22 18 21
X2030200B M30×2 6HX 2.5P 5 180 35 53 22 18 21
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 7
 TAPS FOR CARBON STEEL & ALLOY STEEL
Type:14 K
Lc

d
fl Ln Lk
L

X20S-NRT Type:5

K
Lc

X20S Forming taps with short chamfer

d
fl Ln Lk
L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
CPM M ISO DIN
◎ Suitable for carbon steel, alloy steel below 35HRC processing
6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X20S04070B M4×0.7 6HX 1.5P 14 63 9 12 4.5 3.4 6
X20S05080B M5×0.8 6HX 1.5P 14 70 10 15 6 4.9 8
X20S06100B M6×1 6HX 1.5P 14 80 10 20 6 4.9 8
X20S07100B M7×1 6HX 1.5P 14 80 10 20 7 5.5 8
X20S08125B M8×1.25 6HX 1.5P 5 90 13 22 8 6.2 9
X20S08100B M8×1 6HX 1.5P 5 90 13 22 8 6.2 9
X20S10150B M10×1.5 6HX 1.5P 5 100 15 24 10 8 11
X20S10125B M10×1.25 6HX 1.5P 5 100 15 24 10 8 11
X20S10100B M10×1 6HX 1.5P 5 100 15 24 10 8 11
X20S12175B M12×1.75 6HX 1.5P 5 110 17 32 9 7 10
X20S12150B M12×1.5 6HX 1.5P 5 110 17 32 9 7 10
X20S12125B M12×1.25 6HX 1.5P 5 110 17 32 9 7 10
X20S12100B M12×1 6HX 1.5P 5 110 17 32 9 7 10
X20S14200B M14×2 6HX 1.5P 5 110 20 33 11 9 12
X20S14150B M14×1.5 6HX 1.5P 5 110 20 33 11 9 12
X20S14125B M14×1.25 6HX 1.5P 5 110 20 33 11 9 12
X20S14100B M14×1 6HX 1.5P 5 110 20 33 11 9 12
X20S16200B M16×2 6HX 1.5P 5 110 20 34 12 9 12
X20S16150B M16×1.5 6HX 1.5P 5 110 20 34 12 9 12
X20S16125B M16×1.25 6HX 1.5P 5 110 20 34 12 9 12
X20S16100B M16×1 6HX 1.5P 5 110 20 34 12 9 12
X20S18250B M18×2.5 6HX 1.5P 5 125 25 36 14 11 14
X20S18200B M18×2 6HX 1.5P 5 125 25 36 14 11 14
X20S18150B M18×1.5 6HX 1.5P 5 125 25 36 14 11 14
X20S20250B M20×2.5 6HX 1.5P 5 140 25 44 16 12 15
X20S20200B M20×2 6HX 1.5P 5 140 25 44 16 12 15
X20S20150B M20×1.5 6HX 1.5P 5 140 25 44 16 12 15
X20S22250B M22×2.5 6HX 1.5P 5 140 25 44 18 14.5 17
X20S22200B M22×2 6HX 1.5P 5 140 25 44 18 14.5 17
X20S22150B M22×1.5 6HX 1.5P 5 140 25 44 18 14.5 17
X20S24300B M24×3 6HX 1.5P 5 160 30 48 18 14.5 17
X20S24250B M24×2.5 6HX 1.5P 5 160 30 48 18 14.5 17
X20S24200B M24×2 6HX 1.5P 5 160 30 48 18 14.5 17
X20S27300B M27×3 6HX 1.5P 5 160 30 48 20 16 19

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

8 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

K
Lc

X20S-NRT

d
fl Ln Lk
X20S Forming taps with short chamfer L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance ISO
◎ Suitable for carbon steel, alloy steel below 35HRC processing CPM M DIN
6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X20S27250B M27×2.5 6HX 1.5P 5 160 30 48 20 16 19
X20S27200B M27×2 6HX 1.5P 5 160 30 48 20 16 19
X20S30350B M30×3.5 6HX 1.5P 5 180 35 53 22 18 21
X20S30300B M30×3 6HX 1.5P 5 180 35 53 22 18 21
X20S30250B M30×2.5 6HX 1.5P 5 180 35 53 22 18 21
X20S30200B M30×2 6HX 1.5P 5 180 35 53 22 18 21
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 9
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:11 K

Lc

X21-NRT

d
fl Ln Lk

L
X21 Forming taps Type:12 K
Lc

2.5P chamfers,for blind hole

d
4P chamfers,for through hole fl Ln Lk
L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
X2104070C M4×0.7 6HX 4P 11 63 9 12 4.5 3.4 6 C
X2104070Z M4×0.7 6HX 2.5P 11 63 9 12 4.5 3.4 6 Z
X2105080C M5×0.8 6HX 4P 11 70 10 15 6 4.9 8 C
X2105080Z M5×0.8 6HX 2.5P 11 70 10 15 6 4.9 8 Z
X2106100C M6×1 6HX 4P 11 80 10 20 6 4.9 8 C
X2106100Z M6×1 6HX 2.5P 11 80 10 20 6 4.9 8 Z
X2107100C M7×1 6HX 4P 11 80 10 20 7 5.5 8 C
X2107100Z M7×1 6HX 2.5P 11 80 10 20 7 5.5 8 Z
X2108125C M8×1.25 6HX 4P 12 90 13 22 8 6.2 9 C
X2108125Z M8×1.25 6HX 2.5P 12 90 13 22 8 6.2 9 Z
X2108100C M8×1 6HX 4P 12 90 13 22 8 6.2 9 C
X2108100Z M8×1 6HX 2.5P 12 90 13 22 8 6.2 9 Z
X2110150C M10×1.5 6HX 4P 12 100 15 24 10 8 11 C
X2110150Z M10×1.5 6HX 2.5P 12 100 15 24 10 8 11 Z
X2110125C M10×1.25 6HX 4P 12 100 15 24 10 8 11 C
X2110125Z M10×1.25 6HX 2.5P 12 100 15 24 10 8 11 Z
X2110100C M10×1 6HX 4P 12 100 15 24 10 8 11 C
X2110100Z M10×1 6HX 2.5P 12 100 15 24 10 8 11 Z
X2112175C M12×1.75 6HX 4P 12 110 17 32 9 7 10 C
X2112175Z M12×1.75 6HX 2.5P 12 110 17 32 9 7 10 Z
X2112150C M12×1.5 6HX 4P 12 110 17 32 9 7 10 C
X2112150Z M12×1.5 6HX 2.5P 12 110 17 32 9 7 10 Z
X2112125C M12×1.25 6HX 4P 12 110 17 32 9 7 10 C
X2112125Z M12×1.25 6HX 2.5P 12 110 17 32 9 7 10 Z
X2112100C M12×1 6HX 4P 12 110 17 32 9 7 10 C
X2112100Z M12×1 6HX 2.5P 12 110 17 32 9 7 10 Z
X2114200C M14×2 6HX 4P 12 110 20 33 11 9 12 C
X2114200Z M14×2 6HX 2.5P 12 110 20 33 11 9 12 Z
X2114150C M14×1.5 6HX 4P 12 110 20 33 11 9 12 C
X2114150Z M14×1.5 6HX 2.5P 12 110 20 33 11 9 12 Z
X2114125C M14×1.25 6HX 4P 12 110 20 33 11 9 12 C
X2114125Z M14×1.25 6HX 2.5P 12 110 20 33 11 9 12 Z
X2114100C M14×1 6HX 4P 12 110 20 33 11 9 12 C
X2114100Z M14×1 6HX 2.5P 12 110 20 33 11 9 12 Z
X2116200C M16×2 6HX 4P 12 110 20 34 12 9 12 C

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

10 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

X21-NRT Lc
Type:12 K

X21 Forming taps

d
2.5P chamfers,for blind hole fl Ln Lk
4P chamfers,for through hole L
◎ High-speed steel material
◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
X2116200Z M16×2 6HX 2.5P 12 110 20 34 12 9 12 Z
X2116150C M16×1.5 6HX 4P 12 110 20 34 12 9 12 C
X2116150Z M16×1.5 6HX 2.5P 12 110 20 34 12 9 12 Z
X2116125C M16×1.25 6HX 4P 12 110 20 34 12 9 12 C
X2116125Z M16×1.25 6HX 2.5P 12 110 20 34 12 9 12 Z
X2116100C M16×1 6HX 4P 12 110 20 34 12 9 12 C
X2116100Z M16×1 6HX 2.5P 12 110 20 34 12 9 12 Z
X2118250C M18×2.5 6HX 4P 12 125 25 36 14 11 14 C
X2118250Z M18×2.5 6HX 2.5P 12 125 25 36 14 11 14 Z
X2118200C M18×2 6HX 4P 12 125 25 36 14 11 14 C
X2118200Z M18×2 6HX 2.5P 12 125 25 36 14 11 14 Z
X2118150C M18×1.5 6HX 4P 12 125 25 36 14 11 14 C
X2118150Z M18×1.5 6HX 2.5P 12 125 25 36 14 11 14 Z
X2120250C M20×2.5 6HX 4P 12 140 25 44 16 12 15 C
X2120250Z M20×2.5 6HX 2.5P 12 140 25 44 16 12 15 Z
X2120200C M20×2 6HX 4P 12 140 25 44 16 12 15 C
X2120200Z M20×2 6HX 2.5P 12 140 25 44 16 12 15 Z
X2120150C M20×1.5 6HX 4P 12 140 25 44 16 12 15 C
X2120150Z M20×1.5 6HX 2.5P 12 140 25 44 16 12 15 Z
X2122250C M22×2.5 6HX 4P 12 140 25 44 18 14.5 17 C
X2122250Z M22×2.5 6HX 2.5P 12 140 25 44 18 14.5 17 Z
X2122200C M22×2 6HX 4P 12 140 25 44 18 14.5 17 C
X2122200Z M22×2 6HX 2.5P 12 140 25 44 18 14.5 17 Z
X2122150C M22×1.5 6HX 4P 12 140 25 44 18 14.5 17 C
X2122150Z M22×1.5 6HX 2.5P 12 140 25 44 18 14.5 17 Z
X2124300C M24×3 6HX 4P 12 160 30 48 18 14.5 17 C
X2124300Z M24×3 6HX 2.5P 12 160 30 48 18 14.5 17 Z
X2124250C M24×2.5 6HX 4P 12 160 30 48 18 14.5 17 C
X2124250Z M24×2.5 6HX 2.5P 12 160 30 48 18 14.5 17 Z
X2124200C M24×2 6HX 4P 12 160 30 48 18 14.5 17 C
X2124200Z M24×2 6HX 2.5P 12 160 30 48 18 14.5 17 Z
X2127300C M27×3 6HX 4P 12 160 30 48 20 16 19 C
X2127300Z M27×3 6HX 2.5P 12 160 30 48 20 16 19 Z
X2127250C M27×2.5 6HX 4P 12 160 30 48 20 16 19 C

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 11
 TAPS FOR CARBON STEEL & ALLOY STEEL

X21-NRT Lc
Type:12 K

X21 Forming taps

d
2.5P chamfers,for blind hole fl Ln Lk
4P chamfers,for through hole L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
X2127250Z M27×2.5 6HX 2.5P 12 160 30 48 20 16 19 Z
X2127200C M27×2 6HX 4P 12 160 30 48 20 16 19 C
X2127200Z M27×2 6HX 2.5P 12 160 30 48 20 16 19 Z
X2130350C M30×3.5 6HX 4P 12 180 35 53 22 18 21 C
X2130350Z M30×3.5 6HX 2.5P 12 180 35 53 22 18 21 Z
X2130300C M30×3 6HX 4P 12 180 35 53 22 18 21 C
X2130300Z M30×3 6HX 2.5P 12 180 35 53 22 18 21 Z
X2130250C M30×2.5 6HX 4P 12 180 35 53 22 18 21 C
X2130250Z M30×2.5 6HX 2.5P 12 180 35 53 22 18 21 Z
X2130200C M30×2 6HX 4P 12 180 35 53 22 18 21 C
X2130200Z M30×2 6HX 2.5P 12 180 35 53 22 18 21 Z
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

12 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

K
Type:11

X21S-NRT
Lc

d
fl Ln Lk

X21S Forming taps with short chamfer Lc

Type:12
K

d
fl Ln Lk
L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
X21S04070Z M4×0.7 6HX 1.5P 11 63 9 12 4.5 3.4 6 Z
X21S05080Z M5×0.8 6HX 1.5P 11 70 10 15 6 4.9 8 Z
X21S06100Z M6×1 6HX 1.5P 11 80 10 20 6 4.9 8 Z
X21S07100Z M7×1 6HX 1.5P 11 80 10 20 7 5.5 8 Z
X21S08125Z M8×1.25 6HX 1.5P 12 90 13 22 8 6.2 9 Z
X21S08100Z M8×1 6HX 1.5P 12 90 13 22 8 6.2 9 Z
X21S10150Z M10×1.5 6HX 1.5P 12 100 15 24 10 8 11 Z
X21S10125Z M10×1.25 6HX 1.5P 12 100 15 24 10 8 11 Z
X21S10100Z M10×1 6HX 1.5P 12 100 15 24 10 8 11 Z
X21S12175Z M12×1.75 6HX 1.5P 12 110 17 32 9 7 10 Z
X21S12150Z M12×1.5 6HX 1.5P 12 110 17 32 9 7 10 Z
X21S12125Z M12×1.25 6HX 1.5P 12 110 17 32 9 7 10 Z
X21S12100Z M12×1 6HX 1.5P 12 110 17 32 9 7 10 Z
X21S14200Z M14×2 6HX 1.5P 12 110 20 33 11 9 12 Z
X21S14150Z M14×1.5 6HX 1.5P 12 110 20 33 11 9 12 Z
X21S14125Z M14×1.25 6HX 1.5P 12 110 20 33 11 9 12 Z
X21S14100Z M14×1 6HX 1.5P 12 110 20 33 11 9 12 Z
X21S16200Z M16×2 6HX 1.5P 12 110 20 34 12 9 12 Z
X21S16150Z M16×1.5 6HX 1.5P 12 110 20 34 12 9 12 Z
X21S16125Z M16×1.25 6HX 1.5P 12 110 20 34 12 9 12 Z
X21S16100Z M16×1 6HX 1.5P 12 110 20 34 12 9 12 Z
X21S18250Z M18×2.5 6HX 1.5P 12 125 25 36 14 11 14 Z
X21S18200Z M18×2 6HX 1.5P 12 125 25 36 14 11 14 Z
X21S18150Z M18×1.5 6HX 1.5P 12 125 25 36 14 11 14 Z
X21S20250Z M20×2.5 6HX 1.5P 12 140 25 44 16 12 15 Z
X21S20200Z M20×2 6HX 1.5P 12 140 25 44 16 12 15 Z
X21S20150Z M20×1.5 6HX 1.5P 12 140 25 44 16 12 15 Z
X21S22250Z M22×2.5 6HX 1.5P 12 140 25 44 18 14.5 17 Z
X21S22200Z M22×2 6HX 1.5P 12 140 25 44 18 14.5 17 Z
X21S22150Z M22×1.5 6HX 1.5P 12 140 25 44 18 14.5 17 Z
X21S24300Z M24×3 6HX 1.5P 12 160 30 48 18 14.5 17 Z
X21S24250Z M24×2.5 6HX 1.5P 12 160 30 48 18 14.5 17 Z
X21S24200Z M24×2 6HX 1.5P 12 160 30 48 18 14.5 17 Z
X21S27300Z M27×3 6HX 1.5P 12 160 30 48 20 16 19 Z

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 13
 TAPS FOR CARBON STEEL & ALLOY STEEL

X20-NRT Lc
Type:12 K

X20 Forming taps

d
2.5P chamfers,for blind hole fl Ln Lk
4P chamfers,for through hole L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
X21S27250Z M27×2.5 6HX 1.5P 12 160 30 48 20 16 19 Z
X21S27200Z M27×2 6HX 1.5P 12 160 30 48 20 16 19 Z
X21S30350Z M30×3.5 6HX 1.5P 12 180 35 53 22 18 21 Z
X21S30300Z M30×3 6HX 1.5P 12 180 35 53 22 18 21 Z
X21S30250Z M30×2.5 6HX 1.5P 12 180 35 53 22 18 21 Z
X21S30200Z M30×2 6HX 1.5P 12 180 35 53 22 18 21 Z
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

14 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

JX10-NRT Type:1
JX10 Forming taps Type:2

K
K
Lc Lc

d
d
2P chamfers,for blind hole fl Lk fl Lk
4P chamfers,for through hole L L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN010025P M1×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
PN010025B M1×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
PN012025P M1.2×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
PN012025B M1.2×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
PN014030P M1.4×0.3 RH4 4P 1 37 6.5 - 3 2.5 3 -
PN014030B M1.4×0.3 RH4 2P 2 36 6.5 - 3 2.5 3 -
PN016035P M1.6×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
PN016035B M1.6×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
PN017035P M1.7×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
PN017035B M1.7×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
PN020040P M2×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
PN020040B M2×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
PN023040P M2.3×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
PN023040B M2.3×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
PN025045P M2.5×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
PN025045B M2.5×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
PN026045P M2.6×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
PN026045B M2.6×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
PN030050P M3×0.5 RH7 4P 1 50 16 - 4 3.2 6 -
PN030050B M3×0.5 RH7 2P 2 48 16 - 4 3.2 6 -
PN035060P M3.5×0.6 RH7 4P 1 50 16 - 4 3.2 6 -
PN035060B M3.5×0.6 RH7 2P 2 48 16 - 4 3.2 6 -
PN040070P M4×0.7 RH7 4P 1 57 18 - 5 4 7 -
PN040070B M4×0.7 RH7 2P 2 55 18 - 5 4 7 -
PN050080P M5×0.8 RH7 4P 1 66 20 - 5.5 4.5 7 -
PN050080B M5×0.8 RH7 2P 2 63.5 20 - 5.5 4.5 7 -
PN060100P M6×1 RH7 4P 1 69 27 - 6 4.5 7 2
PN060100B M6×1 RH7 2P 2 66.5 27 - 6 4.5 7 2
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 15
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5
JX10-NRT

K
Lc

JX10 Forming taps

d
fl Ln Lk
L
2P chamfers,for blind hole
4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN070100P M7×1 RH7 4P 5 70 13 10 6.2 5 8 2
PN070100B M7×1 RH7 2P 5 70 13 10 6.2 5 8 2
PN080125P M8×1.25 RH7 4P 5 70 13 23 6.2 5 8 3
PN080125B M8×1.25 RH7 2P 5 70 13 23 6.2 5 8 3
PN100150P M10×1.5 RH8 4P 5 75 15 28 7 5.5 8 6
PN100150B M10×1.5 RH8 2P 5 75 15 28 7 5.5 8 6
PN120175P M12×1.75 RH9 4P 5 82 17 25 8.5 6.5 9 6
PN120175B M12×1.75 RH9 2P 5 82 17 25 8.5 6.5 9 6
PN140200P M14×2 RH10 4P 5 88 20 31 10.5 8 11 6
PN140200B M14×2 RH10 2P 5 88 20 31 10.5 8 11 6
PN160200P M16×2 RH10 4P 5 95 20 32 12.5 10 13 6
PN160200B M16×2 RH10 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

16 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:1 Type:5

K
K
Lc

JX10-NRT
Lc

d
fl Lk fl Ln Lk

JX10 Forming taps L

L

Type:2 Type:6 K

K
Lc
LC
2P chamfers,for blind hole
4P chamfers,for through hole

d
fl Lk Lk
fl
L L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PNU164P NO.1-64UNC RH4 4P 1 37 9 - 3 2.5 3 -
PNU164B NO.1-64UNC RH4 2P 2 35.5 9 - 3 2.5 3 -
PNU256P NO.2-56UNC RH4 4P 1 45 12 - 3 2.5 3 -
PNU256B NO.2-56UNC RH4 2P 2 43.5 12 - 3 2.5 3 -
PNU348P NO.3-48UNC RH4 4P 1 45 15 - 3 2.5 3 -
PNU348B NO.3-48UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
PNU440P NO.4-40UNC RH4 4P 1 45 15 - 3 2.5 3 -
PNU440B NO.4-40UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
PNU540P NO.5-40UNC RH4 4P 1 50 15 - 4 3.2 6 -
PNU540B NO.5-40UNC RH4 2P 2 48 15 - 4 3.2 6 -
PNU632P NO.6-32UNC RH7 4P 1 50 16 - 4 3.2 6 -
PNU632B NO.6-32UNC RH7 2P 2 48 16 - 4 3.2 6 -
PNU832P NO.8-32UNC RH7 4P 1 57 18 - 5 4 7 -
PNU832B NO.8-32UNC RH7 2P 2 54.5 18 - 5 4 7 -
PNU1024P NO.10-24UNC RH7 4P 1 66 20 - 5.5 4.5 7 -
PNU1024B NO.10-24UNC RH7 2P 2 63.5 20 - 5.5 4.5 7 -
PNU1224P NO.12-24UNC RH7 4P 1 66 23 - 5.5 4.5 7 -
PNU1224B NO.12-24UNC RH7 2P 2 63.5 23 - 5.5 4.5 7 -
PNU1420P 1/4-20UNC RH7 4P 6 62 27 - 6 4.5 7 2
PNU1420B 1/4-20UNC RH7 2P 6 62 27 - 6 4.5 7 2
PNU51618P 5/16-18UNC RH8 4P 5 70 15 15 6.1 5 8 3
PNU51618B 5/16-18UNC RH8 2P 5 70 15 15 6.1 5 8 3
PNU3816P 3/8-16UNC RH8 4P 5 75 16 27 7 5.5 8 6
PNU3816B 3/8-16UNC RH8 2P 5 75 16 27 7 5.5 8 6
PNU71614P 7/16-14UNC RH8 4P 5 80 20 20 8 6 9 6
PNU71614B 7/16-14UNC RH8 2P 5 80 20 20 8 6 9 6
PNU1213P 1/2-13UNC RH8 4P 5 85 21 27 9 7 10 6
PNU1213B 1/2-13UNC RH8 2P 5 85 21 27 9 7 10 6
PNU91612P 9/16-12UNC RH9 4P 5 90 21 29 10.5 8 11 6
PNU91612B 9/16-12UNC RH9 2P 5 90 21 29 10.5 8 11 6
PNU5811P 5/8-11UNC RH10 4P 5 95 23 25 12 9 12 6
PNU5811B 5/8-11UNC RH10 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 17
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:3
Type:1
Lc

K
Lc

JX10-S-NRT

d
fl Lk
L

JX10 Forming taps with fine thread Type:4

Lc
Type:2

K
LC

2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk
L L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN010020P M1×0.2 RH4 4P 1 32 3 - 3 2.5 3 -
PN010020B M1×0.2 RH4 2P 2 31 3 - 3 2.5 3 -
PN012020P M1.2×0.2 RH4 4P 1 32 3 - 3 2.5 3 -
PN012020B M1.2×0.2 RH4 2P 2 31 3 - 3 2.5 3 -
PN014020P M1.4×0.2 RH4 4P 1 37 3 - 3 2.5 3 -
PN014020B M1.4×0.2 RH4 2P 2 36 3 - 3 2.5 3 -
PN016020P M1.6×0.2 RH4 4P 1 37 3 - 3 2.5 3 -
PN016020B M1.6×0.2 RH4 2P 2 36 3 - 3 2.5 3 -
PN020025P M2×0.25 RH4 4P 1 45 4 - 3 2.5 3 -
PN020025B M2×0.25 RH4 2P 2 43.5 4 - 3 2.5 3 -
PN030035P M3×0.35 RH4 4P 3 50 6 8 4 3.2 6 -
PN030035B M3×0.35 RH4 2P 4 48 6 8 4 3.2 6 -
PN040050P M4×0.5 RH7 4P 3 57 8 8 5 4 7 -
PN040050B M4×0.5 RH7 2P 4 55 8 8 5 4 7 -
PN050050P M5×0.5 RH7 4P 3 66 8 8 5.5 4.5 7 -
PN050050B M5×0.5 RH7 2P 4 64 8 8 5.5 4.5 7 -
PN060050P M6×0.5 RH7 4P 3 69 12 12 6 4.5 7 2
PN060050B M6×0.5 RH7 2P 4 66 12 12 6 4.5 7 2
PN060075P M6×0.75 RH7 4P 3 69 12 12 6 4.5 7 2
PN060075B M6×0.75 RH7 2P 4 66 12 12 6 4.5 7 2
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

18 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

JX10-S-NRT Type:5

K
Lc

JX10 Forming taps with fine thread

d
fl Ln Lk
2P chamfers,for blind hole
L
4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN080100P M8×1 RH7 4P 5 70 13 23 6.2 5 8 3
PN080100B M8×1 RH7 2P 5 70 13 23 6.2 5 8 3
PN080075P M8×0.75 RH7 4P 5 70 13 23 6.2 5 8 3
PN080075B M8×0.75 RH7 2P 5 70 13 23 6.2 5 8 3
PN100125P M10×1.25 RH7 4P 5 75 13 30 7 5.5 8 6
PN100125B M10×1.25 RH7 2P 5 75 13 30 7 5.5 8 6
PN100100P M10×1 RH7 4P 5 75 13 30 7 5.5 8 6
PN100100B M10×1 RH7 2P 5 75 13 30 7 5.5 8 6
PN100075P M10×0.75 RH7 4P 5 75 13 30 7 5.5 8 6
PN100075B M10×0.75 RH7 2P 5 75 13 30 7 5.5 8 6
PN120150P M12×1.5 RH8 4P 5 82 17 25 8.5 6.5 9 6
PN120150B M12×1.5 RH8 2P 5 82 17 25 8.5 6.5 9 6
PN120125P M12×1.25 RH7 4P 5 82 13 29 8.5 6.5 9 6
PN120125B M12×1.25 RH7 2P 5 82 13 29 8.5 6.5 9 6
PN120100P M12×1 RH7 4P 5 82 13 29 8.5 6.5 9 6
PN120100B M12×1 RH7 2P 5 82 13 29 8.5 6.5 9 6
PN140150P M14×1.5 RH8 4P 5 88 20 31 10.5 8 11 6
PN140150B M14×1.5 RH8 2P 5 88 20 31 10.5 8 11 6
PN140125P M14×1.25 RH7 4P 5 88 20 31 10.5 8 11 6
PN140125B M14×1.25 RH7 2P 5 88 20 31 10.5 8 11 6
PN140100P M14×1 RH7 4P 5 88 20 31 10.5 8 11 6
PN140100B M14×1 RH7 2P 5 88 20 31 10.5 8 11 6
PN160150P M16×1.5 RH8 4P 5 95 20 32 12.5 10 13 6
PN160150B M16×1.5 RH8 2P 5 95 20 32 12.5 10 13 6
PN160125P M16×1.25 RH7 4P 5 95 20 32 12.5 10 13 6
PN160125B M16×1.25 RH7 2P 5 95 20 32 12.5 10 13 6
PN160100P M16×1 RH7 4P 5 95 20 32 12.5 10 13 6
PN160100B M16×1 RH7 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 19
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:1 Type:5

JX10-S-NRT

K
K
Lc Lc

d
JX10 Forming taps with fine thread fl
L
Lk fl Ln
L
Lk

Type:6
K
2P chamfers,for blind hole Type:2

K
Lc
LC

4P chamfers,for through hole

d
fl Lk Lk
fl
L L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PNU080P NO.0-80UNF RH4 4P 1 37 6.5 - 3 2.5 3 -
PNU080B NO.0-80UNF RH4 2P 2 35.5 6.5 - 3 2.5 3 -
PNU172P NO.1-72UNF RH4 4P 1 37 9 - 3 2.5 3 -
PNU172B NO.1-72UNF RH4 2P 2 35.5 9 - 3 2.5 3 -
PNU1032P NO.10-32UNF RH7 4P 1 66 20 - 5.5 4.5 7 -
PNU1032B NO.10-32UNF RH7 2P 2 63.5 20 - 5.5 4.5 7 -
PNU1228P NO.12-28UNF RH7 4P 1 66 23 - 5.5 4.5 7 -
PNU1228B NO.12-28UNF RH7 2P 2 63.5 23 - 5.5 4.5 7 -
PNU1428P 1/4-28UNF RH7 4P 6 62 27 - 6 4.5 7 2
PNU1428B 1/4-28UNF RH7 2P 6 62 27 - 6 4.5 7 2
PNU51624P 5/16-24UNF RH7 4P 5 70 11 19 6.1 5 8 3
PNU51624B 5/16-24UNF RH7 2P 5 70 11 19 6.1 5 8 3
PNU3824P 3/8-24UNF RH7 4P 5 75 11 32 7 5.5 8 6
PNU3824B 3/8-24UNF RH7 2P 5 75 11 32 7 5.5 8 6
PNU71620P 7/16-20UNF RH7 4P 5 80 13 27 8 6 9 6
PNU71620B 7/16-20UNF RH7 2P 5 80 13 27 8 6 9 6
PNU1220P 1/2-20UNF RH7 4P 5 85 13 35 9 7 10 6
PNU1220B 1/2-20UNF RH7 2P 5 85 13 35 9 7 10 6
PNU91618P 9/16-18UNF RH8 4P 5 90 15 35 10.5 8 11 6
PNU91618B 9/16-18UNF RH8 2P 5 90 15 35 10.5 8 11 6
PNU5818P 5/8-18UNF RH8 4P 5 95 23 25 12 9 12 6
PNU5818B 5/8-18UNF RH8 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

20 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:3
Lc

JX10-BK-NRT
JX10 Forming taps with long neck
Type:4
Lc
2P chamfers,for blind hole
4P chamfers,for through hole
L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PBK0204P M2×0.4 RH5 4P 3 45 7 6 3 2.5 3 -
PBK0204B M2×0.4 RH5 2P 4 43.5 7 6 3 2.5 3 -
PBK025045P M2.5×0.45 RH5 4P 3 45 8 7 3 2.5 3 -
PBK025045B M2.5×0.45 RH5 2P 4 43.5 8 7 3 2.5 3 -
PBK0305P M3×0.5 RH7 4P 3 50 10 8 4 3.2 6 -
PBK0305B M3×0.5 RH7 2P 4 48 10 8 4 3.2 6 -
PBK03506P M3.5×0.6 RH7 4P 3 50 10 8 4 3.2 6 -
PBK03506B M3.5×0.6 RH7 2P 4 48 10 8 4 3.2 6 -
PBK0407P M4×0.7 RH7 4P 3 57 11 9 5 4 7 -
PBK0407B M4×0.7 RH7 2P 4 55 11 9 5 4 7 -
PBK045075P M4.5×0.75 RH7 4P 3 57 11 9 5 4 7 -
PBK045075B M4.5×0.75 RH7 2P 4 55 11 9 5 4 7 -
PBK0508P M5×0.8 RH7 4P 3 66 12 10 5.5 4.5 7 -
PBK0508B M5×0.8 RH7 2P 4 63.5 12 10 5.5 4.5 7 -
PBK0610P M6×1 RH7 4P 3 69 12 12 6 4.5 7 2
PBK0610B M6×1 RH7 2P 4 66 12 12 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 21
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:3
Lc

JX10-BK-NRT
JX10 Forming taps with long neck
Type:4
Lc
2P chamfers,for blind hole
4P chamfers,for through hole
L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PUBK440P NO.4-40UNC RH4 4P 3 45 9 7 3 2.5 3 -
PUBK440B NO.4-40UNC RH4 2P 4 43.5 9 7 3 2.5 3 -
PUBK540P NO.5-40UNC RH4 4P 3 50 10 8 4 3.2 6 -
PUBK540B NO.5-40UNC RH4 2P 4 48 10 8 4 3.2 6 -
PUBK632P NO.6-32UNC RH7 4P 3 50 10 8 4 3.2 6 -
PUBK632B NO.6-32UNC RH7 2P 4 48 10 8 4 3.2 6 -
PUBK832P NO.8-32UNC RH7 4P 3 57 11 9 5 4 7 -
PUBK832B NO.8-32UNC RH7 2P 4 55 11 9 5 4 7 -
PUBK1024P NO.10-24UNC RH7 4P 3 66 12 10 5.5 4.5 7 -
PUBK1024B NO.10-24UNC RH7 2P 4 63.5 12 10 5.5 4.5 7 -
PUBK1224P NO.12-24UNC RH7 4P 3 66 12 12 5.5 4.5 7 -
PUBK1224B NO.12-24UNC RH7 2P 4 63.5 12 12 5.5 4.5 7 -
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

22 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:1

JX10-LH-NRT

K
Lc

d
JX10 Forming taps with LH thread fl
L
Lk

K
LC Type:2
2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk
L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PLH01025P M1×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
PLH01025B M1×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
PLH012025P M1.2×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
PLH012025B M1.2×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
PLH014030P M1.4×0.3 RH4 4P 1 37 6.5 - 3 2.5 3 -
PLH014030B M1.4×0.3 RH4 2P 2 36 6.5 - 3 2.5 3 -
PLH016035P M1.6×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
PLH016035B M1.6×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
PLH017035P M1.7×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
PLH017035B M1.7×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
PLH02040P M2×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
PLH02040B M2×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
PLH02304P M2.3×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
PLH02304B M2.3×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
PLH025045P M2.5×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
PLH025045B M2.5×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
PLH026045P M2.6×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
PLH026045B M2.6×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
PLH03050P M3×0.5 RH7 4P 1 50 16 - 4 3.2 6 -
PLH03050B M3×0.5 RH7 2P 2 48 16 - 4 3.2 6 -
PLH03506P M3.5×0.6 RH7 4P 1 50 16 - 4 3.2 6 -
PLH03506B M3.5×0.6 RH7 2P 2 48 16 - 4 3.2 6 -
PLH04070P M4×0.7 RH7 4P 1 57 18 - 5 4 7 -
PLH04070B M4×0.7 RH7 2P 2 55 18 - 5 4 7 -
PLH05080P M5×0.8 RH7 4P 1 66 20 - 5.5 4.5 7 -
PLH05080B M5×0.8 RH7 2P 2 63.5 20 - 5.5 4.5 7 -
PLH06100P M6×1 RH7 4P 1 69 27 - 6 4.5 7 2
PLH06100B M6×1 RH7 2P 2 66.5 27 - 6 4.5 7 2
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 23
 TAPS FOR CARBON STEEL & ALLOY STEEL

JX10-LH-NRT Type:5
JX10 Forming taps with LH thread

K
Lc

d
2P chamfers,for blind hole
fl Ln Lk
4P chamfers,for through hole
L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PLH07100P M7×1 RH7 4P 5 70 13 10 6.2 5 8 2
PLH07100B M7×1 RH7 2P 5 70 13 10 6.2 5 8 2
PLH08125P M8×1.25 RH7 4P 5 70 13 23 6.2 5 8 3
PLH08125B M8×1.25 RH7 2P 5 70 13 23 6.2 5 8 3
PLH10150P M10×1.5 RH8 4P 5 75 15 28 7 5.5 8 6
PLH10150B M10×1.5 RH8 2P 5 75 15 28 7 5.5 8 6
PLH12175P M12×1.75 RH9 4P 5 82 17 25 8.5 6.5 9 6
PLH12175B M12×1.75 RH9 2P 5 82 17 25 8.5 6.5 9 6
PLH14200P M14×2 RH10 4P 5 88 20 31 10.5 8 11 6
PLH14200B M14×2 RH10 2P 5 88 20 31 10.5 8 11 6
PLH16200P M16×2 RH10 4P 5 95 20 32 12.5 10 13 6
PLH16200B M16×2 RH10 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

24 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:1 Type:5

K
K
Lc

JX10-LH-NRT
Lc

d
fl Lk fl Ln Lk

JX10 Forming taps with LH thread

L
L

Type:6
Type:2 K

K
Lc
2P chamfers,for blind hole LC

4P chamfers,for through hole

d
fl Lk Lk
fl
L L

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PULH164P NO.1-64UNC RH4 4P 1 37 9 - 3 2.5 3 -
PULH164B NO.1-64UNC RH4 2P 2 35.5 9 - 3 2.5 3 -
PULH256P NO.2-56UNC RH4 4P 1 45 12 - 3 2.5 3 -
PULH256B NO.2-56UNC RH4 2P 2 43.5 12 - 3 2.5 3 -
PULH348P NO.3-48UNC RH4 4P 1 45 15 - 3 2.5 3 -
PULH348B NO.3-48UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
PULH440P NO.4-40UNC RH4 4P 1 45 15 - 3 2.5 3 -
PULH440B NO.4-40UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
PULH540P NO.5-40UNC RH4 4P 1 50 15 - 4 3.2 6 -
PULH540B NO.5-40UNC RH4 2P 2 48 15 - 4 3.2 6 -
PULH632P NO.6-32UNC RH7 4P 1 50 16 - 4 3.2 6 -
PULH632B NO.6-32UNC RH7 2P 2 48 16 - 4 3.2 6 -
PULH832P NO.8-32UNC RH7 4P 1 57 18 - 5 4 7 -
PULH832B NO.8-32UNC RH7 2P 2 54.5 18 - 5 4 7 -
PULH1024P NO.10-24UNC RH7 4P 1 66 20 - 5.5 4.5 7 -
PULH1024B NO.10-24UNC RH7 2P 2 63.5 20 - 5.5 4.5 7 -
PULH1224P NO.12-24UNC RH7 4P 1 66 23 - 5.5 4.5 7 -
PULH1224B NO.12-24UNC RH7 2P 2 63.5 23 - 5.5 4.5 7 -
PULH1420P 1/4-20UNC RH7 4P 6 62 27 - 6 4.5 7 2
PULH1420B 1/4-20UNC RH7 2P 6 62 27 - 6 4.5 7 2
PULH51618P 5/16-18UNC RH8 4P 5 70 15 15 6.1 5 8 3
PULH51618B 5/16-18UNC RH8 2P 5 70 15 15 6.1 5 8 3
PULH3816P 3/8-16UNC RH8 4P 5 75 16 27 7 5.5 8 6
PULH3816B 3/8-16UNC RH8 2P 5 75 16 27 7 5.5 8 6
PULH71614P 7/16-14UNC RH8 4P 5 80 20 20 8 6 9 6
PULH71614B 7/16-14UNC RH8 2P 5 80 20 20 8 6 9 6
PULH1213P 1/2-13UNC RH8 4P 5 85 21 27 9 7 10 6
PULH1213B 1/2-13UNC RH8 2P 5 85 21 27 9 7 10 6
PULH91612P 9/16-12UNC RH9 4P 5 90 21 29 10.5 8 11 6
PULH91612B 9/16-12UNC RH9 2P 5 90 21 29 10.5 8 11 6
PULH5811P 5/8-11UNC RH10 4P 5 95 23 25 12 9 12 6
PULH5811B 5/8-11UNC RH10 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 25
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:7

JX10-L-NRT
JX10 Forming taps with long shank Type:8

2P chamfers,for blind hole

4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN020480P M2×0.4 RH5 4P 7 80 7 6 3 2.5 5 -
PN020480B M2×0.4 RH5 2P 8 78 7 6 3 2.5 5 -
PN0204100P M2×0.4 RH5 4P 7 100 7 6 3 2.5 5 -
PN0204100B M2×0.4 RH5 2P 8 98 7 6 3 2.5 5 -
PN0204120P M2×0.4 RH5 4P 7 120 7 6 3 2.5 5 -
PN0204120B M2×0.4 RH5 2P 8 118 7 6 3 2.5 5 -
PN02504580P M2.5×0.45 RH5 4P 7 80 8 7 3 2.5 5 -
PN02504580B M2.5×0.45 RH5 2P 8 78 8 7 3 2.5 5 -
PN025045100P M2.5×0.45 RH5 4P 7 100 8 7 3 2.5 5 -
PN025045100B M2.5×0.45 RH5 2P 8 98 8 7 3 2.5 5 -
PN025045120P M2.5×0.45 RH5 4P 7 120 8 7 3 2.5 5 -
PN025045120B M2.5×0.45 RH5 2P 8 118 8 7 3 2.5 5 -
PN030580P M3×0.5 RH7 4P 7 80 10 8 4 3.2 6 -
PN030580B M3×0.5 RH7 2P 8 78 10 8 4 3.2 6 -
PN0305100P M3×0.5 RH7 4P 7 100 10 8 4 3.2 6 -
PN0305100B M3×0.5 RH7 2P 8 98 10 8 4 3.2 6 -
PN0305120P M3×0.5 RH7 4P 7 120 10 8 4 3.2 6 -
PN0305120B M3×0.5 RH7 2P 8 118 10 8 4 3.2 6 -
PN0305150P M3×0.5 RH7 4P 7 150 10 8 4 3.2 6 -
PN0305150B M3×0.5 RH7 2P 8 148 10 8 4 3.2 6 -
PN0350680P M3.5×0.6 RH7 4P 7 80 10 8 4 3.2 6 -
PN0350680B M3.5×0.6 RH7 2P 8 78 10 8 4 3.2 6 -
PN03506100P M3.5×0.6 RH7 4P 7 100 10 8 4 3.2 6 -
PN03506100B M3.5×0.6 RH7 2P 8 98 10 8 4 3.2 6 -
PN03506120P M3.5×0.6 RH7 4P 7 120 10 8 4 3.2 6 -
PN03506120B M3.5×0.6 RH7 2P 8 118 10 8 4 3.2 6 -
PN03506150P M3.5×0.6 RH7 4P 7 150 10 8 4 3.2 6 -
PN03506150B M3.5×0.6 RH7 2P 8 148 10 8 4 3.2 6 -
PN040780P M4×0.7 RH7 4P 7 80 11 9 5 4 7 -
PN040780B M4×0.7 RH7 2P 8 78 11 9 5 4 7 -
PN0407100P M4×0.7 RH7 4P 7 100 11 9 5 4 7 -
PN0407100B M4×0.7 RH7 2P 8 98 11 9 5 4 7 -
PN0407120P M4×0.7 RH7 4P 7 120 11 9 5 4 7 -
PN0407120B M4×0.7 RH7 2P 8 118 11 9 5 4 7 -
PN0407150P M4×0.7 RH7 4P 7 150 11 9 5 4 7 -
PN0407150B M4×0.7 RH7 2P 8 148 11 9 5 4 7 -

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

26 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

JX10-L-NRT Type:5
Type:7

K
Lc

JX10 Forming taps with long shank

d
Type:8
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN04507580P M4.5×0.75 RH7 4P 7 80 11 9 5 4 7 -
PN04507580B M4.5×0.75 RH7 2P 8 78 11 9 5 4 7 -
PN045075100P M4.5×0.75 RH7 4P 7 100 11 9 5 4 7 -
PN045075100B M4.5×0.75 RH7 2P 8 98 11 9 5 4 7 -
PN045075120P M4.5×0.75 RH7 4P 7 120 11 9 5 4 7 -
PN045075120B M4.5×0.75 RH7 2P 8 118 11 9 5 4 7 -
PN045075150P M4.5×0.75 RH7 4P 7 150 11 9 5 4 7 -
PN045075150B M4.5×0.75 RH7 2P 8 148 11 9 5 4 7 -
PN050880P M5×0.8 RH7 4P 7 80 12 10 5.5 4.5 7 -
PN050880B M5×0.8 RH7 2P 8 78 12 10 5.5 4.5 7 -
PN0508100P M5×0.8 RH7 4P 7 100 12 10 5.5 4.5 7 -
PN0508100B M5×0.8 RH7 2P 8 98 12 10 5.5 4.5 7 -
PN0508120P M5×0.8 RH7 4P 7 120 12 10 5.5 4.5 7 -
PN0508120B M5×0.8 RH7 2P 8 118 12 10 5.5 4.5 7 -
PN0508150P M5×0.8 RH7 4P 7 150 12 10 5.5 4.5 7 -
PN0508150B M5×0.8 RH7 2P 8 148 12 10 5.5 4.5 7 -
PN061080P M6×1 RH7 4P 7 80 12 12 6 4.5 7 2
PN061080B M6×1 RH7 2P 8 78 12 12 6 4.5 7 2
PN0610100P M6×1 RH7 4P 7 100 12 12 6 4.5 7 2
PN0610100B M6×1 RH7 2P 8 98 12 12 6 4.5 7 2
PN0610120P M6×1 RH7 4P 7 120 12 12 6 4.5 7 2
PN0610120B M6×1 RH7 2P 8 118 12 12 6 4.5 7 2
PN0610150P M6×1 RH7 4P 7 150 12 12 6 4.5 7 2
PN0610150B M6×1 RH7 2P 8 148 12 12 6 4.5 7 2
PN0710100B M7×1 RH7 2P 5 100 13 10 6.2 5 8 2
PN0710120B M7×1 RH7 2P 5 120 13 10 6.2 5 8 2
PN0710150B M7×1 RH7 2P 5 150 13 10 6.2 5 8 2
PN08125100B M8×1.25 RH7 2P 5 100 13 23 6.2 5 8 3
PN08125120B M8×1.25 RH7 2P 5 120 13 23 6.2 5 8 3
PN08125150B M8×1.25 RH7 2P 5 150 13 23 6.2 5 8 3
PN0810100B M8×1 RH7 2P 5 100 13 23 6.2 5 8 3
PN0810120B M8×1 RH7 2P 5 120 13 23 6.2 5 8 3
PN0810150B M8×1 RH7 2P 5 150 13 23 6.2 5 8 3
PN1015100B M10×1.5 RH8 2P 5 100 15 28 7 5.5 8 6
PN1015120B M10×1.5 RH8 2P 5 120 15 28 7 5.5 8 6
PN1015150B M10×1.5 RH8 2P 5 150 15 28 7 5.5 8 6

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 27
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

JX10-L-NRT

K
Lc

d
JX10 Forming taps with long shank fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PN10125100B M10×1.25 RH7 2P 5 100 13 30 7 5.5 8 6
PN10125120B M10×1.25 RH7 2P 5 120 13 30 7 5.5 8 6
PN10125150B M10×1.25 RH7 2P 5 150 13 30 7 5.5 8 6
PN1010100B M10×1 RH7 2P 5 100 13 30 7 5.5 8 6
PN1010120B M10×1 RH7 2P 5 120 13 30 7 5.5 8 6
PN1010150B M10×1 RH7 2P 5 150 13 30 7 5.5 8 6
PN12175100B M12×1.75 RH9 2P 5 100 17 25 8.5 6.5 9 6
PN12175120B M12×1.75 RH9 2P 5 120 17 25 8.5 6.5 9 6
PN12175150B M12×1.75 RH9 2P 5 150 17 25 8.5 6.5 9 6
PN1215100B M12×1.5 RH8 2P 5 100 17 25 8.5 6.5 9 6
PN1215120B M12×1.5 RH8 2P 5 120 17 25 8.5 6.5 9 6
PN1215150B M12×1.5 RH8 2P 5 150 17 25 8.5 6.5 9 6
PN12125100B M12×1.25 RH7 2P 5 100 13 29 8.5 6.5 9 6
PN12125120B M12×1.25 RH7 2P 5 120 13 29 8.5 6.5 9 6
PN12125150B M12×1.25 RH7 2P 5 150 13 29 8.5 6.5 9 6
PN1210100B M12×1 RH7 2P 5 100 13 29 8.5 6.5 9 6
PN1210120B M12×1 RH7 2P 5 120 13 29 8.5 6.5 9 6
PN1210150B M12×1 RH7 2P 5 150 13 29 8.5 6.5 9 6
PN1420120B M14×2 RH10 2P 5 120 20 31 10.5 8 11 6
PN1420150B M14×2 RH10 2P 5 150 20 31 10.5 8 11 6
PN1415120B M14×1.5 RH8 2P 5 120 20 31 10.5 8 11 6
PN1415150B M14×1.5 RH8 2P 5 150 20 31 10.5 8 11 6
PN14125120B M14×1.25 RH7 2P 5 120 20 31 10.5 8 11 6
PN14125150B M14×1.25 RH7 2P 5 150 20 31 10.5 8 11 6
PN1410120B M14×1 RH7 2P 5 120 20 31 10.5 8 11 6
PN1410150B M14×1 RH7 2P 5 150 20 31 10.5 8 11 6
PN1620120B M16×2 RH10 2P 5 120 20 32 12.5 10 13 6
PN1620150B M16×2 RH10 2P 5 150 20 32 12.5 10 13 6
PN1615120B M16×1.5 RH8 2P 5 120 20 32 12.5 10 13 6
PN1615150B M16×1.5 RH8 2P 5 150 20 32 12.5 10 13 6
PN16125120B M16×1.25 RH7 2P 5 120 20 32 12.5 10 13 6
PN16125150B M16×1.25 RH7 2P 5 150 20 32 12.5 10 13 6
PN1610120B M16×1 RH7 2P 5 120 20 32 12.5 10 13 6
PN1610150B M16×1 RH7 2P 5 150 20 32 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

28 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:7

JX10-L-NRT
JX10 Forming taps with long shank Type:8

2P chamfers,for blind hole

4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PNU44080P NO.4-40UNC RH4 4P 7 80 9 7 3 2.5 5 -
PNU44080B NO.4-40UNC RH4 2P 8 78 9 7 3 2.5 5 -
PNU440100P NO.4-40UNC RH4 4P 7 100 9 7 3 2.5 5 -
PNU440100B NO.4-40UNC RH4 2P 8 98 9 7 3 2.5 5 -
PNU440120P NO.4-40UNC RH4 4P 7 120 9 7 3 2.5 5 -
PNU440120B NO.4-40UNC RH4 2P 8 118 9 7 3 2.5 5 -
PNU54080P NO.5-40UNC RH4 4P 7 80 10 8 4 3.2 6 -
PNU54080B NO.5-40UNC RH4 2P 8 78 10 8 4 3.2 6 -
PNU540100P NO.5-40UNC RH4 4P 7 100 10 8 4 3.2 6 -
PNU540100B NO.5-40UNC RH4 2P 8 98 10 8 4 3.2 6 -
PNU540120P NO.5-40UNC RH4 4P 7 120 10 8 4 3.2 6 -
PNU540120B NO.5-40UNC RH4 2P 8 118 10 8 4 3.2 6 -
PNU63280P NO.6-32UNC RH7 4P 7 80 10 8 4 3.2 6 -
PNU63280B NO.6-32UNC RH7 2P 8 78 10 8 4 3.2 6 -
PNU632100P NO.6-32UNC RH7 4P 7 100 10 8 4 3.2 6 -
PNU632100B NO.6-32UNC RH7 2P 8 98 10 8 4 3.2 6 -
PNU632120P NO.6-32UNC RH7 4P 7 120 10 8 4 3.2 6
PNU632120B NO.6-32UNC RH7 2P 8 118 10 8 4 3.2 6 -
PNU632150P NO.6-32UNC RH7 4P 7 150 10 8 4 3.2 6 -
PNU632150B NO.6-32UNC RH7 2P 8 148 10 8 4 3.2 6 -
PNU83280P NO.8-32UNC RH7 4P 7 80 11 9 5 4 7 -
PNU83280B NO.8-32UNC RH7 2P 8 78 11 9 5 4 7 -
PNU832100P NO.8-32UNC RH7 4P 7 100 11 9 5 4 7 -
PNU832100B NO.8-32UNC RH7 2P 8 98 11 9 5 4 7 -
PNU832120P NO.8-32UNC RH7 4P 7 120 11 9 5 4 7 -
PNU832120B NO.8-32UNC RH7 2P 8 118 11 9 5 4 7 -
PNU832150P NO.8-32UNC RH7 4P 7 150 11 9 5 4 7 -
PNU832150B NO.8-32UNC RH7 2P 8 148 11 9 5 4 7 -
PNU102480P NO.10-24UNC RH7 4P 7 80 12 10 5.5 4.5 7 -
PNU102480B NO.10-24UNC RH7 2P 8 78 12 10 5.5 4.5 7 -
PNU1024100P NO.10-24UNC RH7 4P 7 100 12 10 5.5 4.5 7 -
PNU1024100B NO.10-24UNC RH7 2P 8 98 12 10 5.5 4.5 7 -
PNU1024120P NO.10-24UNC RH7 4P 7 120 12 10 5.5 4.5 7 -
PNU1024120B NO.10-24UNC RH7 2P 8 118 12 10 5.5 4.5 7 -
PNU1024150P NO.10-24UNC RH7 4P 7 150 12 10 5.5 4.5 7 -
PNU1024150B NO.10-24UNC RH7 2P 8 148 12 10 5.5 4.5 7 -

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 29
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:7

JX10-L-NRT Type:5

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk Type:8
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PNU122480P NO.12-24UNC RH7 4P 7 80 12 12 5.5 4.5 7 -
PNU122480B NO.12-24UNC RH7 2P 8 78 12 12 5.5 4.5 7 -
PNU1224100P NO.12-24UNC RH7 4P 7 100 12 12 5.5 4.5 7 -
PNU1224100B NO.12-24UNC RH7 2P 8 98 12 12 5.5 4.5 7 -
PNU1224120P NO.12-24UNC RH7 4P 7 120 12 12 5.5 4.5 7 -
PNU1224120B NO.12-24UNC RH7 2P 8 118 12 12 5.5 4.5 7 -
PNU1224150P NO.12-24UNC RH7 4P 7 150 12 12 5.5 4.5 7 -
PNU1224150B NO.12-24UNC RH7 2P 8 148 12 12 5.5 4.5 7 -
PNU1420100B 1/4-20UNC RH7 2P 5 100 12 12 6 4.5 7 2
PNU1420120B 1/4-20UNC RH7 2P 5 120 12 12 6 4.5 7 2
PNU1420150B 1/4-20UNC RH7 2P 5 150 12 12 6 4.5 7 2
PNU1428100B 1/4-28UNF RH7 2P 5 100 12 12 6 4.5 7 2
PNU1428120B 1/4-28UNF RH7 2P 5 120 12 12 6 4.5 7 2
PNU1428150B 1/4-28UNF RH7 2P 5 150 12 12 6 4.5 7 2
PNU51618100B 5/16-18UNC RH8 2P 5 100 15 15 6.1 5 8 3
PNU51618120B 5/16-18UNC RH8 2P 5 120 15 15 6.1 5 8 3
PNU51618150B 5/16-18UNC RH8 2P 5 150 15 15 6.1 5 8 3
PNU51624100B 5/16-24UNF RH7 2P 5 100 11 19 6.1 5 8 3
PNU51624120B 5/16-24UNF RH7 2P 5 120 11 19 6.1 5 8 3
PNU51624150B 5/16-24UNF RH7 2P 5 150 11 19 6.1 5 8 3
PNU3816100B 3/8-16UNC RH8 2P 5 100 16 27 7 5.5 8 6
PNU3816120B 3/8-16UNC RH8 2P 5 120 16 27 7 5.5 8 6
PNU3816150B 3/8-16UNC RH8 2P 5 150 16 27 7 5.5 8 6
PNU3824100B 3/8-24UNF RH7 2P 5 100 11 32 7 5.5 8 6
PNU3824120B 3/8-24UNF RH7 2P 5 120 11 32 7 5.5 8 6
PNU3824150B 3/8-24UNF RH7 2P 5 150 11 32 7 5.5 8 6
PNU71614100B 7/16-14UNC RH8 2P 5 100 20 20 8 6 9 6
PNU71614120B 7/16-14UNC RH8 2P 5 120 20 20 8 6 9 6
PNU71614150B 7/16-14UNC RH8 2P 5 150 20 20 8 6 9 6
PNU71620100B 7/16-20UNF RH7 2P 5 100 13 27 8 6 9 6
PNU71620120B 7/16-20UNF RH7 2P 5 120 13 27 8 6 9 6
PNU71620150B 7/16-20UNF RH7 2P 5 150 13 27 8 6 9 6
PNU1213100B 1/2-13UNC RH8 2P 5 100 21 27 9 7 10 6
PNU1213120B 1/2-13UNC RH8 2P 5 120 21 27 9 7 10 6
PNU1213150B 1/2-13UNC RH8 2P 5 150 21 27 9 7 10 6

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

30 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

JX10-L-NRT Type:5

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ TICN-AL coating, excellent wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PNU1220100B 1/2-20UNF RH7 2P 5 100 13 35 9 7 10 6
PNU1220120B 1/2-20UNF RH7 2P 5 120 13 35 9 7 10 6
PNU1220150B 1/2-20UNF RH7 2P 5 150 13 35 9 7 10 6
PNU91612120B 9/16-12UNC RH9 2P 5 120 21 29 10.5 8 11 6
PNU91612150B 9/16-12UNC RH9 2P 5 150 21 29 10.5 8 11 6
PNU91618120B 9/16-18UNF RH8 2P 5 120 15 35 10.5 8 11 6
PNU91618150B 9/16-18UNF RH8 2P 5 150 15 35 10.5 8 11 6
PNU5811120B 5/8-11UNC RH10 2P 5 120 23 25 12 9 12 6
PNU5811150B 5/8-11UNC RH10 2P 5 150 23 25 12 9 12 6
PNU5818120B 5/8-18UNF RH8 2P 5 120 23 25 12 9 12 6
PNU5818150B 5/8-18UNF RH8 2P 5 150 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 31
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:13 K
Lc

X20-SFT

d
fl Ln Lk
L
X20 Spiral fluted taps Type:5

K
Lc

d
fl Ln Lk
L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20S04070 M4×0.7 6HX 2.5P 13 63 9 12 4.5 3.4 6 -
X20S05080 M5×0.8 6HX 2.5P 13 70 10 15 6 4.9 8 -
X20S06100 M6×1 6HX 2.5P 13 80 10 20 6 4.9 8 -
X20S07100 M7×1 6HX 2.5P 13 80 10 20 7 5.5 8 -
X20S08125 M8×1.25 6HX 2.5P 5 90 13 22 8 6.2 9 -
X20S08100 M8×1 6HX 2.5P 5 90 13 22 8 6.2 9 -
X20S10150 M10×1.5 6HX 2.5P 5 100 15 24 10 8 11 -
X20S10125 M10×1.25 6HX 2.5P 5 100 15 24 10 8 11 -
X20S10100 M10×1 6HX 2.5P 5 100 15 24 10 8 11 -
X20S12175 M12×1.75 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12150 M12×1.5 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12125 M12×1.25 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12100 M12×1 6HX 2.5P 5 110 17 32 9 7 10 -
X20S14200 M14×2 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14150 M14×1.5 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14125 M14×1.25 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14100 M14×1 6HX 2.5P 5 110 20 33 11 9 12 -
X20S16200 M16×2 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16150 M16×1.5 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16125 M16×1.25 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16100 M16×1 6HX 2.5P 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

32 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:3
Lc

SFT45 Lc
Type:1

K
SFT45 Spiral fluted taps with

d
Type:5
fl Lk

K
Lc

high spiral L

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PS010025 M1×0.25 P1 1.5P 1 37 4.5 - 3 2.5 3 2
PS012025 M1.2×0.25 P1 1.5P 1 37 4.5 - 3 2.5 3 2
PS014030 M1.4×0.3 P1 1.5P 1 37 6.5 - 3 2.5 3 2
PS016035 M1.6×0.35 P2 1.5P 1 37 8 - 3 2.5 3 2
PS020040 M2×0.4 P2 2.5P 1 45 11 - 3 2.5 3 2
PS030050 M2.5×0.45 P2 2.5P 1 45 12 - 3 2.5 3 2
PS030050 M3×0.5 P2 2.5P 3 50 5 13 4 3.2 6 3
PS035060 M3.5×0.6 P2 2.5P 3 50 6 13 4 3.2 6 3
PS040070 M4×0.7 P2 2.5P 3 57 9 11 5 4 7 3
PS050080 M5×0.8 P2 2.5P 3 66 8 17 5.5 4.5 7 3
PS060100 M6×1 P2 2.5P 3 69 12 12 6 4.5 7 3
PS070100 M7×1 P3 2.5P 3 78 13 10 6.2 5 8 3
PS080125 M8×1.25 P3 2.5P 5 70 13 23 6.2 5 8 3
PS080100 M8×1 P3 3.5P 5 70 13 23 6.2 5 8 3
PS100150 M10×1.5 P4 2.5P 5 75 15 28 7 5.5 8 3
PS100125 M10×1.25 P3 2.5P 5 75 13 30 7 5.5 8 3
PS100100 M10×1 P3 2.5P 5 75 13 30 7 5.5 8 3
PS120175 M12×1.75 P4 2.5P 5 82 17 25 8.5 6.5 9 3
PS120150 M12×1.5 P4 2.5P 5 82 17 25 8.5 6.5 9 3
PS120125 M12×1.25 P4 2.5P 5 82 13 29 8.5 6.5 9 3
PS120100 M12×1 P3 2.5P 5 82 13 29 8.5 6.5 9 3
PS140200 M14×2 P5 2.5P 5 88 20 31 10.5 8 11 3
PS140150 M14×1.5 P4 2.5P 5 88 20 31 10.5 8 11 3
PS140125 M14×1.25 P4 2.5P 5 88 20 31 10.5 8 11 3
PS140100 M14×1 P3 2.5P 5 88 20 31 10.5 8 11 3
PS160200 M16×2 P5 2.5P 5 95 20 32 12.5 10 13 3
PS160150 M16×1.5 P4 2.5P 5 95 20 32 12.5 10 13 3
PS160125 M16×1.25 P4 2.5P 5 95 20 32 12.5 10 13 3
PS160100 M16×1 P3 2.5P 5 95 20 32 12.5 10 13 3
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 33
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:3
Lc

SFT45 Lc
Type:1

K
SFT45 Spiral fluted taps with

d
Type:5
fl Lk

K
Lc

high spiral L

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PSU080 NO.0-80UNF P1 1.5P 1 37 10 - 3 2.5 3 2
PSU164 NO.1-64UNC P1 1.5P 1 37 11 - 3 2.5 3 2
PSU256 NO.2-56UNC P1 2.5P 1 45 12 - 3 2.5 3 2
PSU348 NO.3-48UNC P1 2.5P 1 45 14 - 3 2.5 3 2
PSU440 NO.4-40UNC P2 2.5P 1 45 6 10 3 2.5 3 3
PSU540 NO.5-40UNC P2 2.5P 3 50 7 12 4 3.2 6 3
PSU632 NO.6-32UNC P2 2.5P 3 50 8 12 4 3.2 6 3
PSU640 NO.6-40UNF P2 2.5P 3 50 8 12 4 3.2 6 3
PSU832 NO.8-32UNC P2 2.5P 3 57 8 13.5 5 4 7 3
PSU836 NO.8-36UNF P2 2.5P 3 57 8 13.5 5 4 7 3
PSU1024 NO.10-24UNC P2 2.5P 3 66 10 16 5.5 4.5 7 3
PSU1224 NO.12-24UNC P2 2.5 3 66 10 16 5.5 4.5 7 3
PSU1420 1/4-20UNC P2 2.5P 3 69 12 17 6 4.5 7 3
PSU1228 1/4-28UNF P2 2.5P 3 69 12 17 6 4.5 7 3
PSU51618 5/16-18UNC P3 2.5P 5 70 15 15 6.1 5 8 3
PSU51624 5/16-24UNF P3 2.5P 5 70 11 19 6.1 5 8 3
PSU3816 3/8-16UNC P3 2.5P 5 75 16 27 7 5.5 8 3
PSU3824 3/8-24UNF P3 2.5P 5 75 11 32 7 5.5 8 3
PSU71614 7/16-14UNC P4 2.5P 5 80 20 20 8 6 9 3
PSU71620 7/16-20UNF P3 2.5P 5 80 13 27 8 6 9 3
PSU1213 1/2-13UNC P4 2.5P 5 85 21 27 9 7 10 3
PSU1220 1/2-20UNF P3 2.5P 5 85 13 35 9 7 10 3
PSU91612 9/16-12UNC P4 2.5P 5 90 21 29 10.5 8 11 3
PSU91618 9/16-18UNF P3 2.5P 5 90 15 35 10.5 8 11 3
PSU5811 5/8-11UNC P4 2.5P 5 95 23 25 12 9 12 3
PSU5818 5/8-18UNF P3 2.5P 5 95 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

34 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:3

K
Lc

S-SFT

d
fl Ln Lk
L
SFT Spiral fluted taps with

K
Lc Type:5

fine thread

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PS030035 M3×0.35 P2 2.5P 3 50 5 13 4 3.2 6 3
PS035035 M3.5×0.35 P2 2.5P 3 50 6 13 4 3.2 6 3
PS040050 M4×0.5 P2 2.5P 3 57 9 11 5 4 7 3
PS050050 M5×0.5 P2 2.5P 3 66 8 17 5.5 4.5 7 3
PS060050 M6×0.5 P2 2.5P 3 69 12 12 6 4.5 7 3
PS060075 M6×0.75 P2 2.5P 3 69 12 12 6 4.5 7 3
PS070075 M7×0.75 P3 2.5P 3 78 13 10 6.2 5 8 3
PS080075 M8×0.75 P3 2.5P 5 70 13 23 6.2 5 8 3
PS100075 M10×0.75 P3 2.5P 5 75 13 30 7 5.5 8 3
PSU640 NO.6-40UNF P2 2.5P 3 50 8 12 4 3.2 6 3
PSU836 NO.8-36UNF P2 2.5P 3 57 8 13.5 5 4 7 3
Tolerances under 6H/2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 35
 TAPS FOR CARBON STEEL & ALLOY STEEL

K
Lc Type:5

L-SFT

d
fl Ln Lk

SFT Spiral fluted taps with long shank L

Type:7

◎ High-speed steel material;

◎ TICN-AL coating, smooth chip removal, excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PS020480 M2×0.4 P2 2.5P 7 80 9 6 3 2.5 5 2
PS0204100 M2×0.4 P2 2.5P 7 100 9 6 3 2.5 5 2
PS02504580 M2.5×0.45 P2 2.5P 7 80 9 6 3 2.5 5 2
PS025045100 M2.5×0.45 P2 2.5P 7 100 9 6 3 2.5 5 2
PS030580 M3×0.5 P2 2.5P 7 80 12 7 4 3.2 6 3
PS0305100 M3×0.5 P2 2.5P 7 100 12 7 4 3.2 6 3
PS0305120 M3×0.5 P2 2.5P 7 120 12 7 4 3.2 6 3
PS0305150 M3×0.5 P2 2.5P 7 150 12 7 4 3.2 6 3
PS0350680 M3.5×0.6 P2 2.5P 7 80 13 7 4 3.2 6 3
PS03506100 M3.5×0.6 P2 2.5P 7 100 13 7 4 3.2 6 3
PS03506120 M3.5×0.6 P2 2.5P 7 120 13 7 4 3.2 6 3
PS03506150 M3.5×0.6 P2 2.5P 7 150 13 7 4 3.2 6 3
PS040780 M4×0.7 P2 2.5P 7 80 14 7 5 4 7 3
PS0407100 M4×0.7 P2 2.5P 7 100 14 7 5 4 7 3
PS0407120 M4×0.7 P2 2.5P 7 120 14 7 5 4 7 3
PS0407150 M4×0.7 P2 2.5P 7 150 14 7 5 4 7 3
PS050880 M5×0.8 P2 2.5P 7 80 16 9 5.5 4.5 7 3
PS0508100 M5×0.8 P2 2.5P 7 100 16 9 5.5 4.5 7 3
PS0508120 M5×0.8 P2 2.5P 7 120 16 9 5.5 4.5 7 3
PS0508150 M5×0.8 P2 2.5P 7 150 16 9 5.5 4.5 7 3
PS061080 M6×1 P2 2.5P 7 80 19.5 9.5 6 4.5 7 3
PS0610100 M6×1 P2 2.5P 7 100 19.5 9.5 6 4.5 7 3
PS0610120 M6×1 P2 2.5P 7 120 19.5 9.5 6 4.5 7 3
PS0610150 M6×1 P2 2.5P 7 150 19.5 9.5 6 4.5 7 3
PS0710100 M7×1 P3 2.5P 7 100 13 10 6.2 5 8 3
PS0710120 M7×1 P3 2.5P 7 120 13 10 6.2 5 8 3
PS0710150 M7×1 P3 2.5P 7 150 13 10 6.2 5 8 3
PS08125100 M8×1.25 P3 2.5P 5 100 22 15 6.2 5 8 3
PS08125120 M8×1.25 P3 2.5P 5 120 22 15 6.2 5 8 3
PS08125150 M8×1.25 P3 2.5P 5 150 22 15 6.2 5 8 3
PS0810100 M8×1 P3 2.5P 5 100 22 15 6.2 5 8 3
PS0810120 M8×1 P3 2.5P 5 120 22 15 6.2 5 8 3
PS0810150 M8×1 P3 2.5P 5 150 22 15 6.2 5 8 3
PS1015100 M10×1.5 P4 2.5P 5 100 24 19 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

36 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

L-SFT

K
Lc

d
SFT Spiral fluted taps with long shank fl Ln Lk
L
◎ High-speed steel material;
◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PS1015120 M10×1.5 P4 2.5P 5 120 24 19 7 5.5 8 3
PS1015150 M10×1.5 P4 2.5P 5 150 24 19 7 5.5 8 3
PS10125100 M10×1.25 P3 2.5P 5 100 24 19 7 5.5 8 3
PS10125120 M10×1.25 P3 2.5P 5 120 24 19 7 5.5 8 3
PS10125150 M10×1.25 P3 2.5P 5 150 24 19 7 5.5 8 3
PS1010100 M10×1 P3 2.5P 5 100 24 19 7 5.5 8 3
PS1010120 M10×1 P3 2.5P 5 120 24 19 7 5.5 8 3
PS1010150 M10×1 P3 2.5P 5 150 24 19 7 5.5 8 3
PS12175100 M12×1.75 P4 2.5P 5 100 29 17 8.5 6.5 9 3
PS12175120 M12×1.75 P4 2.5P 5 120 29 17 8.5 6.5 9 3
PS12175150 M12×1.75 P4 2.5P 5 150 29 17 8.5 6.5 9 3
PS1215100 M12×1.5 P4 2.5P 5 100 29 17 8.5 6.5 9 3
PS1215120 M12×1.5 P4 2.5P 5 120 29 17 8.5 6.5 9 3
PS1215150 M12×1.5 P4 2.5P 5 150 29 17 8.5 6.5 9 3
PS12125100 M12×1.25 P4 2.5P 5 100 29 17 8.5 6.5 9 3
PS12125120 M12×1.25 P4 2.5P 5 120 29 17 8.5 6.5 9 3
PS12125150 M12×1.25 P4 2.5P 5 150 29 17 8.5 6.5 9 3
PS1210100 M12×1 P3 2.5P 5 100 29 17 8.5 6.5 9 3
PS1210120 M12×1 P3 2.5P 5 120 29 17 8.5 6.5 9 3
PS1210150 M12×1 P3 2.5P 5 150 29 17 8.5 6.5 9 3
PS1420120 M14×2 P5 2.5P 5 120 20 31 10.5 8 11 3
PS1420150 M14×2 P5 2.5P 5 150 20 31 10.5 8 11 3
PS1415120 M14×1.5 P4 2.5P 5 120 20 31 10.5 8 11 3
PS1415150 M14×1.5 P4 2.5P 5 150 20 31 10.5 8 11 3
PS14125120 M14×1.25 P4 2.5P 5 120 20 31 10.5 8 11 3
PS14125150 M14×1.25 P4 2.5P 5 150 20 31 10.5 8 11 3
PS1410120 M14×1 P3 2.5P 5 120 20 31 10.5 8 11 3
PS1410150 M14×1 P3 2.5P 5 150 20 31 10.5 8 11 3
PS1620120 M16×2 P5 2.5P 5 120 20 32 12.5 10 13 3
PS1620150 M16×2 P5 2.5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 37
 TAPS FOR CARBON STEEL & ALLOY STEEL

L-SFT Type:5

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PS1615120 M16×1.5 P4 2.5P 5 120 20 32 12.5 10 13 3
PS1615150 M16×1.5 P4 2.5P 5 150 20 32 12.5 10 13 3
PS16125120 M16×1.25 P4 2.5P 5 120 20 32 12.5 10 13 3
PS16125150 M16×1.25 P4 2.5P 5 150 20 32 12.5 10 13 3
PS1610120 M16×1 P3 2.5P 5 120 20 32 12.5 10 13 3
PS1610150 M16×1 P3 2.5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

38 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

L-SFT Type:5

K
Lc

d
SFT Spiral fluted taps with long shank fl Ln
L
Lk

Type:7

◎ High-speed steel material;

◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PSU44080 NO.4-40UNC P2 2.5P 7 80 10 6 3 2.5 5 3
PSU440100 NO.4-40UNC P2 2.5P 7 100 10 6 3 2.5 5 3
PSU54080 NO.5-40UNC P2 2.5P 7 80 12 7 4 3.2 6 3
PSU540100 NO.5-40UNC P2 2.5P 7 100 12 7 4 3.2 6 3
PSU63280 NO.6-32UNC P2 2.5P 7 80 13 7 4 3.2 6 3
PSU632100 NO.6-32UNC P2 2.5P 7 100 13 7 4 3.2 6 3
PSU632120 NO.6-32UNC P2 2.5P 7 120 13 7 4 3.2 6 3
PSU632150 NO.6-32UNC P2 2.5P 7 150 13 7 4 3.2 6 3
PSU83280 NO.8-32UNC P2 2.5P 7 80 13.5 8 5 4 7 3
PSU832100 NO.8-32UNC P2 2.5P 7 100 13.5 8 5 4 7 3
PSU832120 NO.8-32UNC P2 2.5P 7 120 13.5 8 5 4 7 3
PSU832150 NO.8-32UNC P2 2.5P 7 150 13.5 8 5 4 7 3
PSU102480 NO.10-24UNC P2 2.5P 7 80 16.5 9.5 5.5 4.5 7 3
PSU1024100 NO.10-24UNC P2 2.5P 7 100 16.5 9.5 5.5 4.5 7 3
PSU1024120 NO.10-24UNC P2 2.5P 7 120 16.5 9.5 5.5 4.5 7 3
PSU1024150 NO.10-24UNC P2 2.5P 7 150 16.5 9.5 5.5 4.5 7 3
PSU122480 NO.12-24UNC P2 2.5P 7 80 16.5 9.5 5.5 4.5 7 3
PSU1224100 NO.12-24UNC P2 2.5P 7 100 16.5 9.5 5.5 4.5 7 3
PSU1224120 NO.12-24UNC P2 2.5P 7 120 16.5 9.5 5.5 4.5 7 3
PSU1224150 NO.12-24UNC P2 2.5P 7 150 16.5 9.5 5.5 4.5 7 3
PSU142080 1/4-20UNC P2 2.5P 7 80 19.5 9.5 6 4.5 7 3
PSU1420100 1/4-20UNC P2 2.5P 7 100 19.5 9.5 6 4.5 7 3
PSU1420120 1/4-20UNC P2 2.5P 7 120 19.5 9.5 6 4.5 7 3
PSU1420150 1/4-20UNC P2 2.5P 7 150 19.5 9.5 6 4.5 7 3
PSU51618100 5/16-18UNC P3 2.5P 5 100 23 15 6.1 5 8 3
PSU51618120 5/16-18UNC P3 2.5P 5 120 23 15 6.1 5 8 3
PSU51618150 5/16-18UNC P3 2.5P 5 150 23 15 6.1 5 8 3
PSU51624100 5/16-24UNF P3 2.5P 5 100 23 15 6.1 5 8 3
PSU51624120 5/16-24UNF P3 2.5P 5 120 23 15 6.1 5 8 3
PSU51624150 5/16-24UNF P3 2.5P 5 150 23 15 6.1 5 8 3
PSU3816100 3/8-16UNC P3 2.5P 5 100 25 18 7 5.5 8 3
PSU3816120 3/8-16UNC P3 2.5P 5 120 25 18 7 5.5 8 3
PSU3816150 3/8-16UNC P3 2.5P 5 150 25 18 7 5.5 8 3
PSU3824100 3/8-24UNF P3 2.5P 5 100 25 18 7 5.5 8 3
PSU3824120 3/8-24UNF P3 2.5P 5 120 25 18 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 39
 TAPS FOR CARBON STEEL & ALLOY STEEL

L-SFT Type:5

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating, smooth chip removal, excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PSU3824150 3/8-24UNF P3 2.5P 5 150 25 18 7 5.5 8 3
PSU71614100 7/16-14UNC P4 2.5P 5 100 29 16 8 6 9 3
PSU71614120 7/16-14UNC P4 2.5P 5 120 29 16 8 6 9 3
PSU71614150 7/16-14UNC P4 2.5P 5 150 29 16 8 6 9 3
PSU71620100 7/16-20UNF P3 2.5P 5 100 29 16 8 6 9 3
PSU71620120 7/16-20UNF P3 2.5P 5 120 29 16 8 6 9 3
PSU71620150 7/16-20UNF P3 2.5P 5 150 29 16 8 6 9 3
PSU1213100 1/2-13UNC P4 2.5P 5 100 30 18 9 7 10 3
PSU1213120 1/2-13UNC P4 2.5P 5 120 30 18 9 7 10 3
PSU1213150 1/2-13UNC P4 2.5P 5 150 30 18 9 7 10 3
PSU1220100 1/2-20UNF P3 2.5P 5 100 30 18 9 7 10 3
PSU1220120 1/2-20UNF P3 2.5P 5 120 30 18 9 7 10 3
PSU1220150 1/2-20UNF P3 2.5P 5 150 30 18 9 7 10 3
PSU91612120 9/16-12UNC P4 2.5P 5 120 30 20 10.5 8 11 3
PSU91612150 9/16-12UNC P4 2.5P 5 150 30 20 10.5 8 11 3
PSU91618120 9/16-18UNF P3 2.5P 5 120 30 20 10.5 8 11 3
PSU91618150 9/16-18UNF P3 2.5P 5 150 30 20 10.5 8 11 3
PSU5811120 5/8-11UNC P4 2.5P 5 120 23 25 12 9 12 3
PSU5811150 5/8-11UNC P4 2.5P 5 150 23 25 12 9 12 3
PSU5818120 5/8-18UNF P3 2.5P 5 120 23 25 12 9 12 3
PSU5818150 5/8-18UNF P3 2.5P 5 150 23 25 12 9 12 3
Tolerances under 2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

40 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Lc
Type:3

DS-SFT
DS Spiral fluted taps Type:5

K
Lc

d
fl Ln Lk
L
◎ High-speed steel material;
◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for alloy steel below 35HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
DS040070 M4×0.7 P2 3.5P 3 57 14 7 5 4 7 3
DS050080 M5×0.8 P2 3.5P 3 66 16 9 5.5 4.5 7 3
DS060100 M6×1 P2 3.5P 3 69 19.5 9.5 6 4.5 7 3
DS070100 M7×1 P3 3.5P 3 78 13 10 6.2 5 8 3
DS080125 M8×1.25 P3 3.5P 5 70 22 15 6.2 5 8 3
DS080100 M8×1 P3 3.5P 5 70 22 15 6.2 5 8 3
DS100150 M10×1.5 P4 3.5P 5 75 24 19 7 5.5 8 3
DS100125 M10×1.25 P3 3.5P 5 75 24 19 7 5.5 8 3
DS100100 M10×1 P3 3.5P 5 75 24 19 7 5.5 8 3
DS120175 M12×1.75 P4 3.5P 5 82 29 17 8.5 6.5 9 3
DS120150 M12×1.5 P4 3.5P 5 82 29 17 8.5 6.5 9 3
DS120125 M12×1.25 P4 3.5P 5 82 29 17 8.5 6.5 9 3
DS120100 M12×1 P3 3.5P 5 82 29 17 8.5 6.5 9 3
DS140200 M14×2 P5 3.5P 5 88 20 31 10.5 8 11 3
DS140150 M14×1.5 P4 3.5P 5 88 20 31 10.5 8 11 3
DS140125 M14×1.25 P4 3.5P 5 88 20 31 10.5 8 11 3
DS140100 M14×1 P3 3.5P 5 92 20 31 10.5 8 11 3
DS160200 M16×2 P5 3.5P 5 92 20 32 12.5 10 13 3
DS160150 M16×1.5 P4 3.5P 5 92 20 32 12.5 10 13 3
DS160125 M16×1.25 P4 3.5P 5 92 20 32 12.5 10 13 3
DS160100 M16×1 P3 3.5P 5 92 20 32 12.5 10 13 3
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 41
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

K
Lc

X20-POT

d
fl Ln Lk
L
X20 Spiral pointed taps Lc
Type:13 K

d
fl Ln Lk
L

◎ High-speed steel material

◎ Complex coating, excellent wear resistance CPM M ISO DIN
◎ Suitable for carbon steel, alloy steel below 35HRC processing 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20P04070 M4×0.7 6HX 5P 13 63 9 12 4.5 3.4 6 -
X20P05080 M5×0.8 6HX 5P 13 70 10 15 6 4.9 8 -
X20P06100 M6×1 6HX 5P 13 80 10 20 6 4.9 8 -
X20P07100 M7×1 6HX 5P 13 80 10 20 7 5.5 8 -
X20P08125 M8×1.25 6HX 5P 5 90 13 22 8 6.2 9 -
X20P08100 M8×1 6HX 5P 5 90 13 22 8 6.2 9 -
X20P10150 M10×1.5 6HX 5P 5 100 15 24 10 8 11 -
X20P10125 M10×1.25 6HX 5P 5 100 15 24 10 8 11 -
X20P10100 M10×1 6HX 5P 5 100 15 24 10 8 11 -
X20P12175 M12×1.75 6HX 5P 5 110 17 32 9 7 10 -
X20P12150 M12×1.5 6HX 5P 5 110 17 32 9 7 10 -
X20P12125 M12×1.25 6HX 5P 5 110 17 32 9 7 10 -
X20P12100 M12×1 6HX 5P 5 110 17 32 9 7 10 -
X20P14200 M14×2 6HX 5P 5 110 20 33 11 9 12 -
X20P14150 M14×1.5 6HX 5P 5 110 20 33 11 9 12 -
X20P14125 M14×1.25 6HX 5P 5 110 20 33 11 9 12 -
X20P14100 M14×1 6HX 5P 5 110 20 33 11 9 12 -
X20P16200 M16×2 6HX 5P 5 110 20 34 12 9 12 -
X20P16150 M16×1.5 6HX 5P 5 110 20 34 12 9 12 -
X20P16125 M16×1.25 6HX 5P 5 110 20 34 12 9 12 -
X20P16100 M16×1 6HX 5P 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

42 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

K
POT
Lc

d
Type:1

K
Lc fl Ln Lk

Spiral pointed taps L

d
Lc
fl Lk Type:3
L

◎ High-speed steel material;

◎ TICN-AL coating, forward chip removal, excellant wear resistance.
◎Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PP010025 M1×0.25 P1 5P 1 37 4.5 - 3 2.5 3 2
PP012025 M1.2×0.25 P1 5P 1 37 5.5 - 3 2.5 3 2
PP014030 M1.4×0.3 P1 5P 1 37 9 - 3 2.5 3 2
PP016035 M1.6×0.35 P2 5P 1 37 8 - 3 2.5 3 2
PP020040 M2×0.4 P2 5P 1 45 11 - 3 2.5 3 2
PP025045 M2.5×0.45 P2 5P 1 45 12 - 3 2.5 3 2
PP030050 M3×0.5 P2 5P 3 50 12 7 4 3.2 6 3
PP035060 M3.5×0.6 P2 5P 3 50 13 7 4 3.2 6 3
PP040070 M4×0.7 P2 5P 3 57 14 7 5 4 7 3
PP050080 M5×0.8 P2 5P 3 66 16 9 5.5 4.5 7 3
PP060100 M6×1 P2 5P 3 69 19.5 9.5 6 4.5 7 3
PP070100 M7×1 P3 5P 3 78 13 10 6.2 5 8 3
PP080125 M8×1.25 P3 5P 5 70 22 15 6.2 5 8 3
PP080100 M8×1 P3 5P 5 70 22 15 6.2 5 8 3
PP100150 M10×1.5 P4 5P 5 75 24 19 7 5 8 3
PP100125 M10×1.25 P3 5P 5 75 24 19 7 5 8 3
PP100100 M10×1 P3 5P 5 75 24 19 7 5 8 3
PP120175 M12×1.75 P4 5P 5 82 29 17 8.5 6.5 9 3
PP120150 M12×1.5 P4 5P 5 82 29 17 8.5 6.5 9 3
PP120125 M12×1.25 P4 5P 5 82 29 17 8.5 6.5 9 3
PP120100 M12×1 P3 5P 5 82 29 17 8.5 6.5 9 3
PP140200 M14×2 P5 5P 5 88 20 31 10.5 8 11 3
PP140150 M14×1.5 P4 5P 5 88 20 31 10.5 8 11 3
PP140125 M14×1.25 P4 5P 5 88 20 31 10.5 8 11 3
PP140100 M14×1 P3 5P 5 88 20 31 10.5 8 11 3
PP160200 M16×2 P5 5P 5 95 20 32 12.5 10 13 3
PP160150 M16×1.5 P4 5P 5 95 20 32 12.5 10 13 3
PP160125 M16×1.25 P4 5P 5 95 20 32 12.5 10 13 3
PP160100 M16×1 P3 5P 5 95 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 43
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

K
Lc

POT

d
Type:1

K
Lc fl Ln Lk
L

d
Spiral pointed taps fl
L
Lk Lc
Type:3

◎ High-speed steel material;

◎ TICN-AL coating, forward chip removal, excellant wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PPU080 NO.0-80UNF P1 5P 1 37 10 - 3 2.5 3 2
PPU164 NO.1-64UNC P1 5P 1 37 11 - 3 2.5 3 2
PPU256 NO.2-56UNC P1 5P 1 45 12 - 3 2.5 3 2
PPU348 NO.3-48UNC P1 5P 1 45 14 - 3 2.5 3 2
PPU440 NO.4-40UNC P2 5P 1 45 13 - 3 2.5 3 2
PPU540 NO.5-40UNC P2 5P 3 50 12 7 4 3.2 6 3
PPU632 NO.6-32UNC P2 5P 3 50 13 7 4 3.2 6 3
PPU832 NO.8-32UNC P2 5P 3 57 13.5 8 5 4 7 3
PPU1024 NO.10-24UNC P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
PPU1032 NO.10-32UNF P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
PPU1224 NO.12-24UNC P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
PPU1228 NO.12-28UNF P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
PPU1420 1/4-20UNC P2 5P 3 69 19.5 9.5 6 4.5 7 3
PPU1428 1/4-28UNF P2 5P 3 69 19.5 9.5 6 4.5 7 3
PPU51618 5/16-18UNC P3 5P 5 70 23 15 6.1 5 8 3
PPU51624 5/16-24UNF P3 5P 5 70 23 15 6.1 5 8 3
PPU3816 3/8-16UNC P3 5P 5 75 25 18 7 5.5 8 3
PPU3824 3/8-24UNF P3 5P 5 75 25 18 7 5.5 8 3
PPU71614 7/16-14UNC P4 5P 5 80 29 16 8 6 9 3
PPU71620 7/16-20UNF P3 5P 5 80 29 16 8 6 9 3
PPU1213 1/2-13UNC P4 5P 5 85 30 18 9 7 10 3
PPU1220 1/2-20UNF P3 5P 5 85 30 18 9 7 10 3
PPU91612 9/16-12UNC P4 5P 5 90 30 20 10.5 8 11 3
PPU91618 9/16-18UNF P3 5P 5 90 30 20 10.5 8 11 3
PPU5811 5/8-11UNC P4 5P 5 95 23 25 12 9 12 3
PPU5818 5/8-18UNF P3 5P 5 95 23 25 12 9 12 3
Tolerances under B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

44 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

K
Lc

S-POT

d
fl Ln Lk

Spiral pointed taps with fine thread L

Lc
Type:3

◎ High-speed steel material;

◎ TICN-AL coating, forward chip removal, excellant wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PP030035 M3×0.35 P2 5P 3 50 5 13 4 3.2 6 3
PP035035 M3.5×0.35 P2 5P 3 50 6 13 4 3.2 6 3
PP040050 M4×0.5 P2 5P 3 57 9 11 5 4 7 3
PP050050 M5×0.5 P2 5P 3 66 8 17 5.5 4.5 7 3
PP060050 M6×0.5 P2 5P 3 69 12 12 6 4.5 7 3
PP060075 M6×0.75 P2 5P 3 69 12 12 6 4.5 7 3
PP070075 M7×0.75 P3 5P 3 78 13 10 6.2 5 8 3
PP080075 M8×0.75 P3 5P 5 70 13 23 6.2 5 8 3
PP100075 M10×0.75 P3 5P 5 75 13 30 7 5.5 8 3
PPU640 NO.6-40UNF P2 5P 3 50 8 12 4 3.2 6 3
PPU836 NO.8-36UNF P2 5P 3 57 8 13.5 5 4 7 3
Tolerances under 6H/2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 45
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

K
Lc

L-POT

d
fl Ln Lk

Spiral pointed tap with long shank L

Type:7

◎ High-speed steel material;

◎ TICN-AL coating, smooth chip removal, excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PP020480 M2×0.4 P2 5P 7 80 9 6 5 2.5 5 2
PP0204100 M2×0.4 P2 5P 7 100 9 6 5 2.5 5 2
PP02504580 M2.5×0.45 P2 5P 7 80 9 6 5 2.5 5 2
PP025045100 M2.5×0.45 P2 5P 7 100 9 6 5 2.5 5 2
PP030580 M3×0.5 P2 5P 7 80 12 7 4 3.2 6 3
PP0305100 M3×0.5 P2 5P 7 100 12 7 4 3.2 6 3
PP0305120 M3×0.5 P2 5P 7 120 12 7 4 3.2 6 3
PP0305150 M3×0.5 P2 5P 7 150 12 7 4 3.2 6 3
PP0350680 M3.5×0.6 P2 5P 7 80 13 7 4 3.2 6 3
PP03506100 M3.5×0.6 P2 5P 7 100 13 7 4 3.2 6 3
PP03506120 M3.5×0.6 P2 5P 7 120 13 7 4 3.2 6 3
PP03506150 M3.5×0.6 P2 5P 7 150 13 7 4 3.2 6 3
PP040780 M4×0.7 P2 5P 7 80 14 7 5 4 7 3
PP0407100 M4×0.7 P2 5P 7 100 14 7 5 4 7 3
PP0407120 M4×0.7 P2 5P 7 120 14 7 5 4 7 3
PP0407150 M4×0.7 P2 5P 7 150 14 7 5 4 7 3
PP050880 M5×0.8 P2 5P 7 80 16 9 5.5 4.5 7 3
PP0508100 M5×0.8 P2 5P 7 100 16 9 5.5 4.5 7 3
PP0508120 M5×0.8 P2 5P 7 120 16 9 5.5 4.5 7 3
PP0508150 M5×0.8 P2 5P 7 150 16 9 5.5 4.5 7 3
PP061080 M6×1 P2 5P 7 80 19.5 9.5 6 4.5 7 3
PP0610100 M6×1 P2 5P 7 100 19.5 9.5 6 4.5 7 3
PP0610120 M6×1 P2 5P 7 120 19.5 9.5 6 4.5 7 3
PP0610150 M6×1 P2 5P 7 150 19.5 9.5 6 4.5 7 3
PP0710100 M7×1 P3 5P 7 100 13 10 6.2 5 8 3
PP0710120 M7×1 P3 5P 7 120 13 10 6.2 5 8 3
PP0710150 M7×1 P3 5P 7 150 13 10 6.2 5 8 3
PP08125100 M8×1.25 P3 5P 5 100 22 15 6.2 5 8 3
PP08125120 M8×1.25 P3 5P 5 120 22 15 6.2 5 8 3
PP08125150 M8×1.25 P3 5P 5 150 22 15 6.2 5 8 3
PP0810100 M8×1 P3 5P 5 100 22 15 6.2 5 8 3
PP0810120 M8×1 P3 5P 5 120 22 15 6.2 5 8 3
PP0810150 M8×1 P3 5P 5 150 22 15 6.2 5 8 3
PP1015100 M10×1.5 P4 5P 5 100 24 19 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

46 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

L-POT Type:5

K
Lc

Spiral pointed tap with long shank

d
fl Ln Lk
L
◎ High-speed steel material;
◎ TICN-AL coating,smooth chip removal,excellent wear resistance.
◎ Suitable for carbon steel, alloy steel below 30HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PP1015120 M10×1.5 P4 5P 5 120 24 19 7 5.5 8 3
PP1015150 M10×1.5 P4 5P 5 150 24 19 7 5.5 8 3
PP10125100 M10×1.25 P3 5P 5 100 24 19 7 5.5 8 3
PP10125120 M10×1.25 P3 5P 5 120 24 19 7 5.5 8 3
PP10125150 M10×1.25 P3 5P 5 150 24 19 7 5.5 8 3
PP1010100 M10×1 P3 5P 5 100 24 19 7 5.5 8 3
PP1010120 M10×1 P3 5P 5 120 24 19 7 5.5 8 3
PP1010150 M10×1 P3 5P 5 150 24 19 7 5.5 8 3
PP12175100 M12×1.75 P4 5P 5 100 29 17 8.5 6.5 9 3
PP12175120 M12×1.75 P4 5P 5 120 29 17 8.5 6.5 9 3
PP12175150 M12×1.75 P4 5P 5 150 29 17 8.5 6.5 9 3
PP1215100 M12×1.5 P4 5P 5 100 29 17 8.5 6.5 9 3
PP1215120 M12×1.5 P4 5P 5 120 29 17 8.5 6.5 9 3
PP1215150 M12×1.5 P4 5P 5 150 29 17 8.5 6.5 9 3
PP12125100 M12×1.25 P4 5P 5 100 29 17 8.5 6.5 9 3
PP12125120 M12×1.25 P4 5P 5 120 29 17 8.5 6.5 9 3
PP12125150 M12×1.25 P4 5P 5 150 29 17 8.5 6.5 9 3
PP1210100 M12×1 P3 5P 5 100 29 17 8.5 6.5 9 3
PP1210120 M12×1 P3 5P 5 120 29 17 8.5 6.5 9 3
PP1210150 M12×1 P3 5P 5 150 29 17 8.5 6.5 9 3
PP1420120 M14×2 P5 5P 5 120 20 31 10.5 8 11 3
PP1420150 M14×2 P5 5P 5 150 20 31 10.5 8 11 3
PP1415120 M14×1.5 P4 5P 5 120 20 31 10.5 8 11 3
PP1415150 M14×1.5 P4 5P 5 150 20 31 10.5 8 11 3
PP14125120 M14×1.25 P4 5P 5 120 20 31 10.5 8 11 3
PP14125150 M14×1.25 P4 5P 5 150 20 31 10.5 8 11 3
PP1410120 M14×1 P3 5P 5 120 20 31 10.5 8 11 3
PP1410150 M14×1 P3 5P 5 150 20 31 10.5 8 11 3
PP1620120 M16×2 P5 5P 5 120 20 32 12.5 10 13 3
PP1620150 M16×2 P5 5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 47
 TAPS FOR CARBON STEEL & ALLOY STEEL

L-POT Type:5

K
Lc

Spiral pointed tap with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating, forward chip removal, excellant wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PP1615120 M16×1.5 P4 5P 5 120 20 32 12.5 10 13 3
PP1615150 M16×1.5 P4 5P 5 150 20 32 12.5 10 13 3
PP16125120 M16×1.25 P4 5P 5 120 20 32 12.5 10 13 3
PP16125150 M16×1.25 P4 5P 5 150 20 32 12.5 10 13 3
PP1610120 M16×1 P3 5P 5 120 20 32 12.5 10 13 3
PP1610150 M16×1 P3 5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

48 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:5

L-POT

K
Lc

d
Spiral pointed tap with long shank
fl Ln Lk
L

Type:7

◎ High-speed steel material;

◎ TICN-AL coating, forward chip removal, excellant wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PPU44080 NO.4-40UNC P2 5P 7 80 80 6 3 2.5 5 2
PPU440100 NO.4-40UNC P2 5P 7 100 100 6 3 2.5 5 2
PPU54080 NO.5-40UNC P2 5P 7 80 80 7 4 3.2 6 3
PPU540100 NO.5-40UNC P2 5P 7 100 100 7 4 3.2 6 3
PPU63280 NO.6-32UNC P2 5P 7 80 80 7 4 3.2 6 3
PPU632100 NO.6-32UNC P2 5P 7 100 100 7 4 3.2 6 3
PPU632120 NO.6-32UNC P2 5P 7 120 120 7 4 3.2 6 3
PPU632150 NO.6-32UNC P2 5P 7 150 150 7 4 3.2 6 3
PPU83280 NO.8-32UNC P2 5P 7 80 80 8 5 4 7 3
PPU832100 NO.8-32UNC P2 5P 7 100 100 8 5 4 7 3
PPU832120 NO.8-32UNC P2 5P 7 120 120 8 5 4 7 3
PPU832150 NO.8-32UNC P2 5P 7 150 150 8 5 4 7 3
PPU102480 NO.10-24UNC P2 5P 7 80 80 9.5 5.5 4.5 7 3
PPU1024100 NO.10-24UNC P2 5P 7 100 100 9.5 5.5 4.5 7 3
PPU1024120 NO.10-24UNC P2 5P 7 120 120 9.5 5.5 4.5 7 3
PPU1024150 NO.10-24UNC P2 5P 7 150 150 9.5 5.5 4.5 7 3
PPU122480 NO.12-24UNC P2 5P 7 80 80 9.5 5.5 4.5 7 3
PPU1224100 NO.12-24UNC P2 5P 7 100 100 9.5 5.5 4.5 7 3
PPU1224120 NO.12-24UNC P2 5P 7 120 120 9.5 5.5 4.5 7 3
PPU1224150 NO.12-24UNC P2 5P 7 150 150 9.5 5.5 4.5 7 3
PPU142080 1/4-20UNC P2 5P 7 80 80 9.5 6 4.5 7 3
PPU1420100 1/4-20UNC P2 5P 7 100 100 9.5 6 4.5 7 3
PPU1420120 1/4-20UNC P2 5P 7 120 120 9.5 6 4.5 7 3
PPU1420150 1/4-20UNC P2 5P 7 150 150 9.5 6 4.5 7 3
PPU51618100 5/16-18UNC P3 5P 5 100 100 15 6.1 5 8 3
PPU51618120 5/16-18UNC P3 5P 5 120 120 15 6.1 5 8 3
PPU51618150 5/16-18UNC P3 5P 5 150 150 15 6.1 5 8 3
PPU51624100 5/16-24UNF P3 5P 5 100 100 15 6.1 5 8 3
PPU51624120 5/16-24UNF P3 5P 5 120 120 15 6.1 5 8 3
PPU51624150 5/16-24UNF P3 5P 5 150 150 15 6.1 5 8 3
PPU3816100 3/8-16UNC P3 5P 5 100 100 18 7 5.5 8 3
PPU3816120 3/8-16UNC P3 5P 5 120 120 18 7 5.5 8 3
PPU3816150 3/8-16UNC P3 5P 5 150 150 18 7 5.5 8 3
PPU3824100 3/8-24UNF P3 5P 5 100 100 18 7 5.5 8 3
PPU3824120 3/8-24UNF P3 5P 5 120 120 18 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

[Link] 49
 TAPS FOR CARBON STEEL & ALLOY STEEL

L-POT Type:5

K
Lc

Spiral pointed tap with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ TICN-AL coating, forward chip removal, excellant wear resistance.
◎ Suitable for processing carbon steel and alloy steel below 30HRC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
PPU3824150 3/8-24UNF P3 5P 5 150 25 18 7 5.5 8 3
PPU71614100 7/16-14UNC P4 5P 5 100 29 16 8 6 9 3
PPU71614120 7/16-14UNC P4 5P 5 120 29 16 8 6 9 3
PPU71614150 7/16-14UNC P4 5P 5 150 29 16 8 6 9 3
PPU71620100 7/16-20UNF P3 5P 5 100 29 16 8 6 9 3
PPU71620120 7/16-20UNF P3 5P 5 120 29 16 8 6 9 3
PPU71620150 7/16-20UNF P3 5P 5 150 29 16 8 6 9 3
PPU1213100 1/2-13UNC P4 5P 5 100 30 18 9 7 10 3
PPU1213120 1/2-13UNC P4 5P 5 120 30 18 9 7 10 3
PPU1213150 1/2-13UNC P4 5P 5 150 30 18 9 7 10 3
PPU1220100 1/2-20UNF P3 5P 5 100 30 18 9 7 10 3
PPU1220120 1/2-20UNF P3 5P 5 120 30 18 9 7 10 3
PPU1220150 1/2-20UNF P3 5P 5 150 30 18 9 7 10 3
PPU91612120 9/16-12UNC P4 5P 5 120 30 20 10.5 8 11 3
PPU91612150 9/16-12UNC P4 5P 5 150 30 20 10.5 8 11 3
PPU91618120 9/16-18UNF P3 5P 5 120 30 20 10.5 8 11 3
PPU91618150 9/16-18UNF P3 5P 5 150 30 20 10.5 8 11 3
PPU5811110 5/8-11UNC P4 5P 5 120 23 25 12 9 12 3
PPU5811150 5/8-11UNC P4 5P 5 150 23 25 12 9 12 3
PPU5818110 5/8-18UNF P3 5P 5 120 23 25 12 9 12 3
PPU5818150 5/8-18UNF P3 5P 5 150 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● - - - - - - - - - -

50 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CARBON STEEL & ALLOY STEEL

Type:1

K
Lc

HHS-POT

d
fl Lk
Spiral pointed taps for difficult to L

machine materials Lc
Type:3

◎ High-speed steel material;

◎ Suitable for the hardness of 30-48HRC carbon carburizing steel or alloy
carburizing steel.
◎ Special tap structure, suitable for CNC tool shank, tool bar, cutter head and
other products of high hardness cutting conditions, good thread quality.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
HHS016035 M1.6×0.35 P1 5P 1 37 8 - 3 2.5 3 2
HHS018035 M1.8×0.35 P2 5P 1 37 8 - 3 2.5 3 2
HHS020040 M2×0.4 P2 5P 1 45 11 - 3 2.5 3 2
HHS022045 M2.2×0.45 P2 5P 1 45 12 - 3 2.5 3 2
HHS025045 M2.5×0.45 P2 5P 1 45 12 - 3 2.5 3 2
HHS030050 M3×0.5 P2 5P 3 50 12 7 4 3.2 6 3
HHS040070 M4×0.7 P2 5P 3 57 14 7 5 4 7 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

[Link] 51
 TAPS FOR CARBON STEEL & ALLOY STEEL

Type:13 K
Lc

d
fl Ln Lk

X20-RLT L

K
Lc Type:5
X20 RLT spiral pointed taps

d
fl Ln Lk
L
◎ High-speed steel material
◎ Complex coating, excellent wear resistance
◎ Suitable for carbon steel, alloy steel below 35HRC processing.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20R06100 M6×1 6HX 7.5 13 80 10 20 6 4.9 8 -
X20R07100 M7×1 6HX 7.5 13 80 10 20 7 5.5 8 -
X20R08125 M8×1.25 6HX 7.5 5 90 13 22 8 6.2 9 -
X20R08100 M8×1 6HX 7.5 5 90 13 22 8 6.2 9 -
X20R10150 M10×1.5 6HX 7.5 5 100 15 24 10 8 11 -
X20R10125 M10×1.25 6HX 7.5 5 100 15 24 10 8 11 -
X20R10100 M10×1 6HX 7.5 5 100 15 24 10 8 11 -
X20R12175 M12×1.75 6HX 7.5 5 110 17 32 9 7 10 -
X20R12150 M12×1.5 6HX 7.5 5 110 17 32 9 7 10 -
X20R12125 M12×1.25 6HX 7.5 5 110 17 32 9 7 10 -
X20R12100 M12×1 6HX 7.5 5 110 17 32 9 7 10 -
X20R14200 M14×2 6HX 7.5 5 110 20 33 11 9 12 -
X20R14150 M14×1.5 6HX 7.5 5 110 20 33 11 9 12 -
X20R14125 M14×1.25 6HX 7.5 5 110 20 33 11 9 12 -
X20R14100 M14×1 6HX 7.5 5 110 20 33 11 9 12 -
X20R16200 M16×2 6HX 7.5 5 110 20 34 12 9 12 -
X20R16150 M16×1.5 6HX 7.5 5 110 20 34 12 9 12 -
X20R16125 M16×1.25 6HX 7.5 5 110 20 34 12 9 12 -
X20R16100 M16×1 6HX 7.5 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

● ● ● ● - - - - - - - - -

52 NINGBO NICHE TOOLS CO. LTD

TAPS

MEMO

[Link] 186
53 NINGBO NICHE TOOLS CO. LTD
 INDEX
TAPS FOR STAINLESS STEEL

X20 FORMING TAPS ........................................................................................................... 55

JX10 FORMING TAPS ......................................................................................................... 59
SPIRAL POINTED TAPS WITH FINE THREAD ................................................................ 62
JX10 FORMING TAPS WITH LONG NECK ..................................................................... 65
JX10 FORMING TAPS WITH LH THREAD....................................................................... 67
JX10 FORMING TAPS WITH LONG SHANK .................................................................. 70
X20 SPIRAL FLUTED TAPS................................................................................................. 77
SFT45 SPIRAL FLUTED TAPS ............................................................................................. 78
SFT SPIRAL FLUTED TAPS WITH FINE THREAD ........................................................... 80
SFT SPIRAL FLUTED TAPS WITH LONG SHANK........................................................... 83
X20 SPIRAL POINTED TAPS .............................................................................................. 86
SPIRAL POINTED TAPS....................................................................................................... 87
SPIRAL POINTED TAPS WITH FINE THREAD ................................................................ 89
SPIRAL POINTED TAPS WITH LONG SHANK ............................................................... 90

[Link] 54
 TAPS FOR STAINLESS STEEL

Type:14 K
Lc

X20-NRT

d
Type:13 K fl Ln Lk
L
X20 Forming taps Lc

d
fl Ln Lk Type:5

K
2.5P chamfers,for blind hole L
Lc

4P chamfers,for through hole

d
fl Ln Lk
◎ High-speed steel material; L

◎ Complex coating, suitable for difficult to machine stainless steel,

excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2004070P M4×0.7 6HX 4P 13 63 9 12 4.5 3.4 6
X2004070B M4×0.7 6HX 2.5P 14 63 9 12 4.5 3.4 6
X2005080P M5×0.8 6HX 4P 13 70 10 15 6 4.9 8
X2005080B M5×0.8 6HX 2.5P 14 70 10 15 6 4.9 8
X2006100P M6×1 6HX 4P 13 80 10 20 6 4.9 8
X2006100B M6×1 6HX 2.5P 14 80 10 20 6 4.9 8
X2007100P M7×1 6HX 4P 13 80 10 20 7 5.5 8
X2007100B M7×1 6HX 2.5P 14 80 10 20 7 5.5 8
X2008125P M8×1.25 6HX 4P 5 90 13 22 8 6.2 9
X2008125B M8×1.25 6HX 2.5P 5 90 13 22 8 6.2 9
X2008100P M8×1 6HX 4P 5 90 13 22 8 6.2 9
X2008100B M8×1 6HX 2.5P 5 90 13 22 8 6.2 9
X2010150P M10×1.5 6HX 4P 5 100 15 24 10 8 11
X2010150B M10×1.5 6HX 2.5P 5 100 15 24 10 8 11
X2010125P M10×1.25 6HX 4P 5 100 15 24 10 8 11

4 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:14 K
Lc

X20-NRT

d
Type:13 K fl Ln Lk
L
X20 Forming taps Lc

d
fl Ln Lk Type:5

K
2.5P chamfers,for blind hole L
Lc

4P chamfers,for through hole

d
fl Ln Lk
◎ High-speed steel material; L

◎ Complex coating, suitable for difficult to machine stainless steel,

excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2010125B M10×1.25 6HX 2.5P 5 100 15 24 10 8 11
X2010100P M10×1 6HX 4P 5 100 15 24 10 8 11
X2010100B M10×1 6HX 2.5P 5 100 15 24 10 8 11
X2012175P M12×1.75 6HX 4P 5 110 17 32 9 7 10
X2012175B M12×1.75 6HX 2.5P 5 110 17 32 9 7 10
X2012150P M12×1.5 6HX 4P 5 110 17 32 9 7 10
X2012150B M12×1.5 6HX 2.5P 5 110 17 32 9 7 10
X2012125P M12×1.25 6HX 4P 5 110 17 32 9 7 10
X2012125B M12×1.25 6HX 2.5P 5 110 17 32 9 7 10
X2012100P M12×1 6HX 4P 5 110 17 32 9 7 10
X2012100B M12×1 6HX 2.5P 5 110 17 32 9 7 10
X2014200P M14×2 6HX 4P 5 110 20 33 11 9 12
X2014200B M14×2 6HX 2.5P 5 110 20 33 11 9 12
X2014150P M14×1.5 6HX 4P 5 110 20 33 11 9 12
X2014150B M14×1.5 6HX 2.5P 5 110 20 33 11 9 12
X2014125P M14×1.25 6HX 4P 5 110 20 33 11 9 12
X2014125B M14×1.25 6HX 2.5P 5 110 20 33 11 9 12
X2014100P M14×1 6HX 4P 5 110 20 33 11 9 12
X2014100B M14×1 6HX 2.5P 5 110 20 33 11 9 12

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 56
 TAPS FOR STAINLESS STEEL

X20-NRT Type:5

K
Lc

X20 Forming taps

d
fl Ln Lk
L
2.5P chamfers,for blind hole
4P chamfers,for through hole

◎ High-speed steel material;

◎ Complex coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2016200P M16×2 6HX 4P 5 110 20 34 12 9 12
X2016200B M16×2 6HX 2.5P 5 110 20 34 12 9 12
X2016150P M16×1.5 6HX 4P 5 110 20 34 12 9 12
X2016150B M16×1.5 6HX 2.5P 5 110 20 34 12 9 12
X2016125P M16×1.25 6HX 4P 5 110 20 34 12 9 12
X2016125B M16×1.25 6HX 2.5P 5 110 20 34 12 9 12
X2016100P M16×1 6HX 4P 5 110 20 34 12 9 12
X2016100B M16×1 6HX 2.5P 5 110 20 34 12 9 12
X2018250P M18×2.5 6HX 4P 5 125 25 36 14 11 14
X2018250B M18×2.5 6HX 2.5P 5 125 25 36 14 11 14
X2018200P M18×2 6HX 4P 5 125 25 36 14 11 14
X2018200B M18×2 6HX 2.5P 5 125 25 36 14 11 14
X2018150P M18×1.5 6HX 4P 5 125 25 36 14 11 14
X2018150B M18×1.5 6HX 2.5P 5 125 25 36 14 11 14
X2020250P M20×2.5 6HX 4P 5 140 25 44 16 12 15
X2020250B M20×2.5 6HX 2.5P 5 140 25 44 16 12 15
X2020200P M20×2 6HX 4P 5 140 25 44 16 12 15
X2020200B M20×2 6HX 2.5P 5 140 25 44 16 12 15
X2020150P M20×1.5 6HX 4P 5 140 25 44 16 12 15
X2020150B M20×1.5 6HX 2.5P 5 140 25 44 16 12 15
X2022250P M22×2.5 6HX 4P 5 140 25 44 18 14.5 17
X2022250B M22×2.5 6HX 2.5P 5 140 25 44 18 14.5 17
X2022200P M22×2 6HX 4P 5 140 25 44 18 14.5 17
X2022200B M22×2 6HX 2.5P 5 140 25 44 18 14.5 17
X2022150P M22×1.5 6HX 4P 5 140 25 44 18 14.5 17
X2022150B M22×1.5 6HX 2.5P 5 140 25 44 18 14.5 17
X2024300P M24×3 6HX 4P 5 160 30 48 18 14.5 17
X2024300B M24×3 6HX 2.5P 5 160 30 48 18 14.5 17
X2024250P M24×2.5 6HX 4P 5 160 30 48 18 14.5 17
X2024250B M24×2.5 6HX 2.5P 5 160 30 48 18 14.5 17
X2024200P M24×2 6HX 4P 5 160 30 48 18 14.5 17
X2024200B M24×2 6HX 2.5P 5 160 30 48 18 14.5 17
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

57 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

X20-NRT Type:5

K
Lc

X20 Forming taps

d
fl Ln Lk
L
2.5P chamfers,for blind hole
4P chamfers,for through hole
◎ High-speed steel material;
◎ Complex coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2027250P M27×2.5 6HX 4P 5 160 30 48 20 16 19
X2027250B M27×2.5 6HX 2.5P 5 160 30 48 20 16 19
X2027200P M27×2 6HX 4P 5 160 30 48 20 16 19
X2027200B M27×2 6HX 2.5P 5 160 30 48 20 16 19
X2030350P M30×3.5 6HX 4P 5 180 35 53 22 18 21
X2030350B M30×3.5 6HX 2.5P 5 180 35 53 22 18 21
X2030300P M30×3 6HX 4P 5 180 35 53 22 18 21
X2030300B M30×3 6HX 2.5P 5 180 35 53 22 18 21
X2030250P M30×2.5 6HX 4P 5 180 35 53 22 18 21
X2030250B M30×2.5 6HX 2.5P 5 180 35 53 22 18 21
X2030200P M30×2 6HX 4P 5 180 35 53 22 18 21
X2030200B M30×2 6HX 2.5P 5 180 35 53 22 18 21
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 58
 TAPS FOR STAINLESS STEEL
Type:1

K
Lc

d
JX10-NRT fl
L
Lk

JX10 Forming taps Type:2

K
LC

2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk
L
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN010025P M1×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
MN010025B M1×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
MN012025P M1.2×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
MN012025B M1.2×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
MN014030P M1.4×0.3 RH4 4P 1 37 6.5 - 3 2.5 3 -
MN014030B M1.4×0.3 RH4 2P 2 36 6.5 - 3 2.5 3 -
MN016035P M1.6×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
MN016035B M1.6×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
MN017035P M1.7×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
MN017035B M1.7×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
MN020040P M2×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
MN020040B M2×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
MN023040P M2.3×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
MN023040B M2.3×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
MN025045P M2.5×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
MN025045B M2.5×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
MN026045P M2.6×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
MN026045B M2.6×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
MN030050P M3×0.5 RH7 4P 1 50 16 - 4 3.2 6 -
MN030050B M3×0.5 RH7 2P 2 48 16 - 4 3.2 6 -
MN035060P M3.5×0.6 RH7 4P 1 50 16 - 4 3.2 6 -
MN035060B M3.5×0.6 RH7 2P 2 48 16 - 4 3.2 6 -
MN040070P M4×0.7 RH7 4P 1 57 18 - 5 4 7 -
MN040070B M4×0.7 RH7 2P 2 55 18 - 5 4 7 -
MN050080P M5×0.8 RH7 4P 1 66 20 - 5.5 4.5 7 -
MN050080B M5×0.8 RH7 2P 2 63.5 20 - 5.5 4.5 7 -
MN060100P M6×1 RH7 4P 1 69 27 - 6 4.5 7 2
MN060100B M6×1 RH7 2P 2 66.5 27 - 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

59 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

JX10-NRT Type:5

K
Lc

JX10 Forming taps

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN070100P M7×1 RH7 4P 5 70 13 10 6.2 5 8 2
MN070100B M7×1 RH7 2P 5 70 13 10 6.2 5 8 2
MN080125P M8×1.25 RH7 4P 5 70 13 23 6.2 5 8 3
MN080125B M8×1.25 RH7 2P 5 70 13 23 6.2 5 8 3
MN100150P M10×1.5 RH8 4P 5 75 15 28 7 5.5 8 6
MN100150B M10×1.5 RH8 2P 5 75 15 28 7 5.5 8 6
MN120175P M12×1.75 RH9 4P 5 82 17 25 8.5 6.5 9 6
MN120175B M12×1.75 RH9 2P 5 82 17 25 8.5 6.5 9 6
MN140200P M14×2 RH10 4P 5 88 20 31 10.5 8 11 6
MN140200B M14×2 RH10 2P 5 88 20 31 10.5 8 11 6
MN160200P M16×2 RH10 4P 5 95 20 32 12.5 10 13 6
MN160200B M16×2 RH10 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 60
 TAPS FOR STAINLESS STEEL

Type:1 Type:5

K
K
Lc
Lc

JX10-NRT

d
d
fl Lk fl Ln Lk

L L

JX10 Forming taps Type:2 Type:6

K
K
LC Lc

2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk Lk
fl
L L
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MNU164P NO.1-64UNC RH4 4P 1 37 9 - 3 2.5 3 -
MNU164B NO.1-64UNC RH4 2P 2 35.5 9 - 3 2.5 3 -
MNU256P NO.2-56UNC RH4 4P 1 45 12 - 3 2.5 3 -
MNU256B NO.2-56UNC RH4 2P 2 43.5 12 - 3 2.5 3 -
MNU348P NO.3-48UNC RH4 4P 1 45 15 - 3 2.5 3 -
MNU348B NO.3-48UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
MNU440P NO.4-40UNC RH4 4P 1 45 15 - 3 2.5 3 -
MNU440B NO.4-40UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
MNU540P NO.5-40UNC RH4 4P 1 50 15 - 4 3.2 6 -
MNU540B NO.5-40UNC RH4 2P 2 48 15 - 4 3.2 6 -
MNU632P NO.6-32UNC RH7 4P 1 50 16 - 4 3.2 6 -
MNU632B NO.6-32UNC RH7 2P 2 48 16 - 4 3.2 6 -
MNU832P NO.8-32UNC RH7 4P 1 57 18 - 5 4 7 -
MNU832B NO.8-32UNC RH7 2P 2 54.5 18 - 5 4 7 -
MNU1024P NO.10-24UNC RH7 4P 1 66 20 - 5.5 4.5 7 -
MNU1024B NO.10-24UNC RH7 2P 2 63.5 20 - 5.5 4.5 7 -
MNU1224P NO.12-24UNC RH7 4P 1 66 23 - 5.5 4.5 7 -
MNU1224B NO.12-24UNC RH7 2P 2 63.5 23 - 5.5 4.5 7 -
MNU1420P 1/4-20UNC RH7 4P 6 62 27 - 6 4.5 7 2
MNU1420B 1/4-20UNC RH7 2P 6 62 27 - 6 4.5 7 2
MNU51618P 5/16-18UNC RH8 4P 5 70 15 15 6.1 5 8 3
MNU51618B 5/16-18UNC RH8 2P 5 70 15 15 6.1 5 8 3
MNU3816P 3/8-16UNC RH8 4P 5 75 16 27 7 5.5 8 6
MNU3816B 3/8-16UNC RH8 2P 5 75 16 27 7 5.5 8 6
MNU71614P 7/16-14UNC RH8 4P 5 80 20 20 8 6 9 6
MNU71614B 7/16-14UNC RH8 2P 5 80 20 20 8 6 9 6
MNU1213P 1/2-13UNC RH8 4P 5 85 21 27 9 7 10 6
MNU1213B 1/2-13UNC RH8 2P 5 85 21 27 9 7 10 6
MNU91612P 9/16-12UNC RH9 4P 5 90 21 29 10.5 8 11 6
MNU91612B 9/16-12UNC RH9 2P 5 90 21 29 10.5 8 11 6
MNU5811P 5/8-11UNC RH10 4P 5 95 23 25 12 9 12 6
MNU5811B 5/8-11UNC RH10 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

61 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:1
Type:3
Lc

K
JX10-S-NRT
Lc

d
fl Lk

JX10 Fine thread forming taps L

Type:2 Type:4
Lc
2P chamfers,for blind hole
4P chamfers,for through hole
L L

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wearresistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN010020P M1×0.2 RH4 4P 1 32 3 - 3 2.5 3 -
MN010020B M1×0.2 RH4 2P 2 31 3 - 3 2.5 3 -
MN012020P M1.2×0.2 RH4 4P 1 32 3 - 3 2.5 3 -
MN012020B M1.2×0.2 RH4 2P 2 31 3 - 3 2.5 3 -
MN014020P M1.4×0.2 RH4 4P 1 37 3 - 3 2.5 3 -
MN014020B M1.4×0.2 RH4 2P 2 36 3 - 3 2.5 3 -
MN016020P M1.6×0.2 RH4 4P 1 37 3 - 3 2.5 3 -
MN016020B M1.6×0.2 RH4 2P 2 36 3 - 3 2.5 3 -
MN020025P M2×0.25 RH4 4P 1 45 4 - 3 2.5 3 -
MN020025B M2×0.25 RH4 2P 2 43.5 4 - 3 2.5 3 -
MN030035P M3×0.35 RH4 4P 3 50 6 8 4 3.2 6 -
MN030035B M3×0.35 RH4 2P 4 48 6 8 4 3.2 6 -
MN040050P M4×0.5 RH7 4P 3 57 8 8 5 4 7 -
MN040050B M4×0.5 RH7 2P 4 55 8 8 5 4 7 -
MN050050P M5×0.5 RH7 4P 3 66 8 8 5.5 4.5 7 -
MN050050B M5×0.5 RH7 2P 4 64 8 8 5.5 4.5 7 -
MN060050P M6×0.5 RH7 4P 3 69 12 12 6 4.5 7 2
MN060050B M6×0.5 RH7 2P 4 66 12 12 6 4.5 7 2
MN060075P M6×0.75 RH7 4P 3 69 12 12 6 4.5 7 2
MN060075B M6×0.75 RH7 2P 4 66 12 12 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 62
 TAPS FOR STAINLESS STEEL

JX10-S-NRT Type:5

K
Lc

JX10 Forming taps with fine thread

d
2.5P chamfers,for blind hole fl Ln Lk
4P chamfers,for through hole L
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wearresistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN080100P M8×1 RH7 4P 5 70 13 23 6.2 5 8 3
MN080100B M8×1 RH7 2P 5 70 13 23 6.2 5 8 3
MN080075P M8×0.75 RH7 4P 5 70 13 23 6.2 5 8 3
MN080075B M8×0.75 RH7 2P 5 70 13 23 6.2 5 8 3
MN100125P M10×1.25 RH7 4P 5 75 13 30 7 5.5 8 6
MN100125B M10×1.25 RH7 2P 5 75 13 30 7 5.5 8 6
MN100100P M10×1 RH7 4P 5 75 13 30 7 5.5 8 6
MN100100B M10×1 RH7 2P 5 75 13 30 7 5.5 8 6
MN100075P M10×0.75 RH7 4P 5 75 13 30 7 5.5 8 6
MN100075B M10×0.75 RH7 2P 5 75 13 30 7 5.5 8 6
MN120150P M12×1.5 RH8 4P 5 82 17 25 8.5 6.5 9 6
MN120150B M12×1.5 RH8 2P 5 82 17 25 8.5 6.5 9 6
MN120125P M12×1.25 RH7 4P 5 82 13 29 8.5 6.5 9 6
MN120125B M12×1.25 RH7 2P 5 82 13 29 8.5 6.5 9 6
MN120100P M12×1 RH7 4P 5 82 13 29 8.5 6.5 9 6
MN120100B M12×1 RH7 2P 5 82 13 29 8.5 6.5 9 6
MN140150P M14×1.5 RH8 4P 5 88 20 31 10.5 8 11 6
MN140150B M14×1.5 RH8 2P 5 88 20 31 10.5 8 11 6
MN140125P M14×1.25 RH7 4P 5 88 20 31 10.5 8 11 6
MN140125B M14×1.25 RH7 2P 5 88 20 31 10.5 8 11 6
MN140100P M14×1 RH7 4P 5 88 20 31 10.5 8 11 6
MN140100B M14×1 RH7 2P 5 88 20 31 10.5 8 11 6
MN160150P M16×1.5 RH8 4P 5 95 20 32 12.5 10 13 6
MN160150B M16×1.5 RH8 2P 5 95 20 32 12.5 10 13 6
MN160125P M16×1.25 RH7 4P 5 95 20 32 12.5 10 13 6
MN160125B M16×1.25 RH7 2P 5 95 20 32 12.5 10 13 6
MN160100P M16×1 RH7 4P 5 95 20 32 12.5 10 13 6
MN160100B M16×1 RH7 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

63 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:1 Type:5

K
K
Lc

JX10-S-NRT
Lc

d
d
fl Lk fl Ln Lk

JX10 Forming taps with fine thread L L

Type:6
Type:2

K
K
LC Lc
2P chamfers,for blind hole

d
4P chamfers,for through hole

d
fl Lk Lk
fl
L L
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wearresistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MNU080P NO.0-80UNF RH4 4P 1 37 6.5 - 3 2.5 3 -
MNU080B NO.0-80UNF RH4 2P 2 35.5 6.5 - 3 2.5 3 -
MNU172P NO.1-72UNF RH4 4P 1 37 9 - 3 2.5 3 -
MNU172B NO.1-72UNF RH4 2P 2 35.5 9 - 3 2.5 3 -
MNU1032P NO.10-32UNF RH7 4P 1 66 20 - 5.5 4.5 7 -
MNU1032B NO.10-32UNF RH7 2P 2 63.5 20 - 5.5 4.5 7 -
MNU1228P NO.12-28UNF RH7 4P 1 66 23 - 5.5 4.5 7 -
MNU1228B NO.12-28UNF RH7 2P 2 63.5 23 - 5.5 4.5 7 -
MNU1428P 1/4-28UNF RH7 4P 6 62 27 - 6 4.5 7 2
MNU1428B 1/4-28UNF RH7 2P 6 62 27 - 6 4.5 7 2
MNU51624P 5/16-24UNF RH7 4P 5 70 11 19 6.1 5 8 3
MNU51624B 5/16-24UNF RH7 2P 5 70 11 19 6.1 5 8 3
MNU3824P 3/8-24UNF RH7 4P 5 75 11 32 7 5.5 8 6
MNU3824B 3/8-24UNF RH7 2P 5 75 11 32 7 5.5 8 6
MNU71620P 7/16-20UNF RH7 4P 5 80 13 27 8 6 9 6
MNU71620B 7/16-20UNF RH7 2P 5 80 13 27 8 6 9 6
MNU1220P 1/2-20UNF RH7 4P 5 85 13 35 9 7 10 6
MNU1220B 1/2-20UNF RH7 2P 5 85 13 35 9 7 10 6
MNU91618P 9/16-18UNF RH8 4P 5 90 15 35 10.5 8 11 6
MNU91618B 9/16-18UNF RH8 2P 5 90 15 35 10.5 8 11 6
MNU5818P 5/8-18UNF RH8 4P 5 95 23 25 12 9 12 6
MNU5818B 5/8-18UNF RH8 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 64
 TAPS FOR STAINLESS STEEL

Type:3
Lc

JX10-BK-NRT
JX10 Forming taps with long neck Type:4
Lc

2P chamfers,for blind hole

4P chamfers,for through hole
L
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wearresistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MBK0204P M2×0.4 RH5 4P 3 45 7 6 3 2.5 3 -
MBK0204B M2×0.4 RH5 2P 4 43.5 7 6 3 2.5 3 -
MBK025045P M2.5×0.45 RH5 4P 3 45 8 7 3 2.5 3 -
MBK025045B M2.5×0.45 RH5 2P 4 43.5 8 7 3 2.5 3 -
MBK030050P M3×0.5 RH7 4P 3 50 10 8 4 3.2 6 -
MBK030050B M3×0.5 RH7 2P 4 48 10 8 4 3.2 6 -
MBK035060P M3.5×0.6 RH7 4P 3 50 10 8 4 3.2 6 -
MBK035060B M3.5×0.6 RH7 2P 4 48 10 8 4 3.2 6 -
MBK040070P M4×0.7 RH7 4P 3 57 11 9 5 4 7 -
MBK040070B M4×0.7 RH7 2P 4 55 11 9 5 4 7 -
MBK045075P M4.5×0.75 RH7 4P 3 57 11 9 5 4 7 -
MBK045075B M4.5×0.75 RH7 2P 4 55 11 9 5 4 7 -
MBK050080P M5×0.8 RH7 4P 3 66 12 10 5.5 4.5 7 -
MBK050080B M5×0.8 RH7 2P 4 63.5 12 10 5.5 4.5 7 -
MBK060100P M6×1 RH7 4P 3 69 12 12 6 4.5 7 2
MBK060100B M6×1 RH7 2P 4 66 12 12 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

65 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:3
Lc

JX10-BK-NRT
JX10 Forming taps with long neck Type:4
Lc
2P chamfers,for blind hole
4P chamfers,for through hole
◎ High-speed steel material; L

◎ YC-200 coating, suitable for difficult to machine stainless

steel,excellent processing characteristics and wearresistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MUBK440P NO.4-40UNC RH4 4P 3 45 9 7 3 2.5 3 -
MUBK440B NO.4-40UNC RH4 2P 4 43.5 9 7 3 2.5 3 -
MUBK540P NO.5-40UNC RH4 4P 3 50 10 8 4 3.2 6 -
MUBK540B NO.5-40UNC RH4 2P 4 48 10 8 4 3.2 6 -
MUBK632P NO.6-32UNC RH7 4P 3 50 10 8 4 3.2 6 -
MUBK632B NO.6-32UNC RH7 2P 4 48 10 8 4 3.2 6 -
MUBK832P NO.8-32UNC RH7 4P 3 57 11 9 5 4 7 -
MUBK832B NO.8-32UNC RH7 2P 4 55 11 9 5 4 7 -
MUBK1024P NO.10-24UNC RH7 4P 3 66 12 10 5.5 4.5 7 -
MUBK1024B NO.10-24UNC RH7 2P 4 63.5 12 10 5.5 4.5 7 -
MUBK1224P NO.12-24UNC RH7 4P 3 66 12 12 5.5 4.5 7 -
MUBK1224B NO.12-24UNC RH7 2P 4 63.5 12 12 5.5 4.5 7 -
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 66
 TAPS FOR STAINLESS STEEL

Type:1

K
Lc

d
JX10-LH-NRT fl
L
Lk

JX10 Forming tap with LH thread Type:2

K
LC
2P chamfers,for blind hole

d
4P chamfers,for through hole
fl Lk
◎ High-speed steel material; L
◎ Thread left - handed, suitable for left - thread machining.
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MLH01025P M1×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
MLH01025B M1×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
MLH01225P M1.2×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
MLH01225B M1.2×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
MLH014030P M1.4×0.3 RH4 4P 1 37 6.5 - 3 2.5 3 -
MLH014030B M1.4×0.3 RH4 2P 2 36 6.5 - 3 2.5 3 -
MLH016035P M1.6×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
MLH016035B M1.6×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
MLH017035P M1.7×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
MLH017035B M1.7×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
MLH020040P M2×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
MLH020040B M2×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
MLH023040P M2.3×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
MLH023040B M2.3×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
MLH025045P M2.5×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
MLH025045B M2.5×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
MLH026045P M2.6×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
MLH026045B M2.6×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
MLH030050P M3×0.5 RH7 4P 1 50 16 - 4 3.2 6 -
MLH030050B M3×0.5 RH7 2P 2 48 16 - 4 3.2 6 -
MLH035060P M3.5×0.6 RH7 4P 1 50 16 - 4 3.2 6 -
MLH035060B M3.5×0.6 RH7 2P 2 48 16 - 4 3.2 6 -
MLH040070P M4×0.7 RH7 4P 1 57 18 - 5 4 7 -
MLH040070B M4×0.7 RH7 2P 2 55 18 - 5 4 7 -
MLH050080P M5×0.8 RH7 4P 1 66 20 - 5.5 4.5 7 -
MLH050080B M5×0.8 RH7 2P 2 63.5 20 - 5.5 4.5 7 -
MLH060100P M6×1 RH7 4P 1 69 27 - 6 4.5 7 2
MLH060100B M6×1 RH7 2P 2 66.5 27 - 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

67 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:5
JX10-LH-NRT

K
Lc

JX10 Forming tap with LH thread

d
fl Ln Lk
2P chamfers,for blind hole
L
4P chamfers,for through hole

◎ High-speed steel material;

◎ Thread left - handed, suitable for left - thread machining.
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MLH07100P M7×1 RH7 4P 5 70 13 10 6.2 5 8 2
MLH07100B M7×1 RH7 2P 5 70 13 10 6.2 5 8 2
MLH08125P M8×1.25 RH7 4P 5 70 13 23 6.2 5 8 3
MLH08125B M8×1.25 RH7 2P 5 70 13 23 6.2 5 8 3
MLH10150P M10×1.5 RH8 4P 5 75 15 28 7 5.5 8 6
MLH10150B M10×1.5 RH8 2P 5 75 15 28 7 5.5 8 6
MLH12175P M12×1.75 RH9 4P 5 82 17 25 8.5 6.5 9 6
MLH12175B M12×1.75 RH9 2P 5 82 17 25 8.5 6.5 9 6
MLH14200P M14×2 RH10 4P 5 88 20 31 10.5 8 11 6
MLH14200B M14×2 RH10 2P 5 88 20 31 10.5 8 11 6
MLH16200P M16×2 RH10 4P 5 95 20 32 12.5 10 13 6
MLH16200B M16×2 RH10 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 68
 TAPS FOR STAINLESS STEEL

Type:1

K
Type:5

K
Lc Lc

JX10-LH-NRT

d
fl Lk fl Ln Lk
L
JX10 Forming tap with LH thread Type:2
L

Type:6 K

K
Lc
LC

2P chamfers,for blind hole

d
fl Lk fl Lk
4P chamfers,for through hole L L

◎ High-speed steel material;

◎ Thread left - handed, suitable for left - thread machining.
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MULH164P NO.1-64UNC RH4 4P 1 37 9 - 3 2.5 3 -
MULH164B NO.1-64UNC RH4 2P 2 35.5 9 - 3 2.5 3 -
MULH256P NO.2-56UNC RH4 4P 1 45 12 - 3 2.5 3 -
MULH256B NO.2-56UNC RH4 2P 2 43.5 12 - 3 2.5 3 -
MULH348P NO.3-48UNC RH4 4P 1 45 15 - 3 2.5 3 -
MULH348B NO.3-48UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
MULH440P NO.4-40UNC RH4 4P 1 45 15 - 3 2.5 3 -
MULH440B NO.4-40UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
MULH540P NO.5-40UNC RH4 4P 1 50 15 - 4 3.2 6 -
MULH540B NO.5-40UNC RH4 2P 2 48 15 - 4 3.2 6 -
MULH632P NO.6-32UNC RH7 4P 1 50 16 - 4 3.2 6 -
MULH632B NO.6-32UNC RH7 2P 2 48 16 - 4 3.2 6 -
MULH832P NO.8-32UNC RH7 4P 1 57 18 - 5 4 7 -
MULH832B NO.8-32UNC RH7 2P 2 54.5 18 - 5 4 7 -
MULH1024P NO.10-24UNC RH7 4P 1 66 20 - 5.5 4.5 7 -
MULH1024B NO.10-24UNC RH7 2P 2 63.5 20 - 5.5 4.5 7 -
MULH1224P NO.12-24UNC RH7 4P 1 66 23 - 5.5 4.5 7 -
MULH1224B NO.12-24UNC RH7 2P 2 63.5 23 - 5.5 4.5 7 -
MULH1420P 1/4-20UNC RH7 4P 6 62 27 - 6 4.5 7 2
MULH1420B 1/4-20UNC RH7 2P 6 62 27 - 6 4.5 7 2
MULH51618P 5/16-18UNC RH8 4P 5 70 15 15 6.1 5 8 3
MULH51618B 5/16-18UNC RH8 2P 5 70 15 15 6.1 5 8 3
MULH3816P 3/8-16UNC RH8 4P 5 75 16 27 7 5.5 8 6
MULH3816B 3/8-16UNC RH8 2P 5 75 16 27 7 5.5 8 6
MULH71614P 7/16-14UNC RH8 4P 5 80 20 20 8 6 9 6
MULH71614B 7/16-14UNC RH8 2P 5 80 20 20 8 6 9 6
MULH1213P 1/2-13UNC RH8 4P 5 85 21 27 9 7 10 6
MULH1213B 1/2-13UNC RH8 2P 5 85 21 27 9 7 10 6
MULH91612P 9/16-12UNC RH9 4P 5 90 21 29 10.5 8 11 6
MULH91612B 9/16-12UNC RH9 2P 5 90 21 29 10.5 8 11 6
MULH5811P 5/8-11UNC RH10 4P 5 95 23 25 12 9 12 6
MULH5811B 5/8-11UNC RH10 2P 5 95 23 25 12 9 12 6
Tolerances under 2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

69 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:7

JX10-L-NRT
JX10 Forming taps with long shank Type:8

2P chamfers,for blind hole

4P chamfers,for through hole
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN020480P M2×0.4 RH5 4P 7 80 7 6 3 2.5 5 -
MN020480B M2×0.4 RH5 2P 8 78 7 6 3 2.5 5 -
MN0204100P M2×0.4 RH5 4P 7 100 7 6 3 2.5 5 -
MN0204100B M2×0.4 RH5 2P 8 98 7 6 3 2.5 5 -
MN0204120P M2×0.4 RH5 4P 7 120 7 6 3 2.5 5 -
MN0204120B M2×0.4 RH5 2P 8 118 7 6 3 2.5 5 -
MN02504580P M2.5×0.45 RH5 4P 7 80 8 7 3 2.5 5 -
MN02504580B M2.5×0.45 RH5 2P 8 78 8 7 3 2.5 5 -
MN025045100P M2.5×0.45 RH5 4P 7 100 8 7 3 2.5 5 -
MN025045100B M2.5×0.45 RH5 2P 8 98 8 7 3 2.5 5 -
MN025045120P M2.5×0.45 RH5 4P 7 120 8 7 3 2.5 5 -
MN025045120B M2.5×0.45 RH5 2P 8 118 8 7 3 2.5 5 -
MN030580P M3×0.5 RH7 4P 7 80 10 8 4 3.2 6 -
MN030580B M3×0.5 RH7 2P 8 78 10 8 4 3.2 6 -
MN0305100P M3×0.5 RH7 4P 7 100 10 8 4 3.2 6 -
MN0305100B M3×0.5 RH7 2P 8 98 10 8 4 3.2 6 -
MN0305120P M3×0.5 RH7 4P 7 120 10 8 4 3.2 6 -
MN0305120B M3×0.5 RH7 2P 8 118 10 8 4 3.2 6 -
MN0305150P M3×0.5 RH7 4P 7 150 10 8 4 3.2 6 -
MN0305150B M3×0.5 RH7 2P 8 148 10 8 4 3.2 6 -
MN0350680P M3.5×0.6 RH7 4P 7 80 10 8 4 3.2 6 -
MN0350680B M3.5×0.6 RH7 2P 8 78 10 8 4 3.2 6 -
MN03506100P M3.5×0.6 RH7 4P 7 100 10 8 4 3.2 6 -
MN03506100B M3.5×0.6 RH7 2P 8 98 10 8 4 3.2 6 -
MN03506120P M3.5×0.6 RH7 4P 7 120 10 8 4 3.2 6 -
MN03506120B M3.5×0.6 RH7 2P 8 118 10 8 4 3.2 6 -
MN03506150P M3.5×0.6 RH7 4P 7 150 10 8 4 3.2 6 -
MN03506150B M3.5×0.6 RH7 2P 8 148 10 8 4 3.2 6 -
MN040780P M4×0.7 RH7 4P 7 80 11 9 5 4 7 -
MN040780B M4×0.7 RH7 2P 8 78 11 9 5 4 7 -
MN0407100P M4×0.7 RH7 4P 7 100 11 9 5 4 7 -
MN0407100B M4×0.7 RH7 2P 8 98 11 9 5 4 7 -
MN0407120P M4×0.7 RH7 4P 7 120 11 9 5 4 7 -
MN0407120B M4×0.7 RH7 2P 8 118 11 9 5 4 7 -
MN0407150P M4×0.7 RH7 4P 7 150 11 9 5 4 7 -
MN0407150B M4×0.7 RH7 2P 7 148 11 9 5 4 7 -

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 70
 TAPS FOR STAINLESS STEEL

JX10-L-NRT Type:7

JX10 Forming taps with long shank Type:5

K
Lc

d
Type:8
fl Ln Lk
2P chamfers,for blind hole L

4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN04507580P M4.5×0.75 RH7 4P 7 80 11 9 5 4 7 -
MN04507580B M4.5×0.75 RH7 2P 8 78 11 9 5 4 7 -
MN045075100P M4.5×0.75 RH7 4P 7 100 11 9 5 4 7 -
MN045075100B M4.5×0.75 RH7 2P 8 98 11 9 5 4 7 -
MN045075120P M4.5×0.75 RH7 4P 7 120 11 9 5 4 7 -
MN045075120B M4.5×0.75 RH7 2P 8 118 11 9 5 4 7 -
MN045075150P M4.5×0.75 RH7 4P 7 150 11 9 5 4 7 -
MN045075150B M4.5×0.75 RH7 2P 8 148 11 9 5 4 7 -
MN050880P M5×0.8 RH7 4P 7 80 12 10 5.5 4.5 7 -
MN050880B M5×0.8 RH7 2P 8 78 12 10 5.5 4.5 7 -
MN0508100P M5×0.8 RH7 4P 7 100 12 10 5.5 4.5 7 -
MN0508100B M5×0.8 RH7 2P 8 98 12 10 5.5 4.5 7 -
MN0508120P M5×0.8 RH7 4P 7 120 12 10 5.5 4.5 7 -
MN0508120B M5×0.8 RH7 2P 8 118 12 10 5.5 4.5 7 -
MN0508150P M5×0.8 RH7 4P 7 150 12 10 5.5 4.5 7 -
MN0508150B M5×0.8 RH7 2P 8 148 12 10 5.5 4.5 7 -
MN061080P M6×1 RH7 4P 7 80 12 12 6 4.5 7 2
MN061080B M6×1 RH7 2P 8 78 12 12 6 4.5 7 2
MN0610100P M6×1 RH7 4P 7 100 12 12 6 4.5 7 2
MN0610100B M6×1 RH7 2P 8 98 12 12 6 4.5 7 2
MN0610120P M6×1 RH7 4P 7 120 12 12 6 4.5 7 2
MN0610120B M6×1 RH7 2P 8 118 12 12 6 4.5 7 2
MN0610150P M6×1 RH7 4P 7 150 12 12 6 4.5 7 2
MN0610150B M6×1 RH7 2P 8 148 12 12 6 4.5 7 2
MN0710100B M7×1 RH7 2P 5 100 13 10 6.2 5 8 2
MN0710120B M7×1 RH7 2P 5 120 13 10 6.2 5 8 2
MN0710150B M7×1 RH7 2P 5 150 13 10 6.2 5 8 2
MN08125100B M8×1.25 RH7 2P 5 100 13 23 6.2 5 8 3
MN08125120B M8×1.25 RH7 2P 5 120 13 23 6.2 5 8 3
MN08125150B M8×1.25 RH7 2P 5 150 13 23 6.2 5 8 3
MN0810100B M8×1 RH7 2P 5 100 13 23 6.2 5 8 3
MN0810120B M8×1 RH7 2P 5 120 13 23 6.2 5 8 3
MN0810150B M8×1 RH7 2P 5 150 13 23 6.2 5 8 3
MN1015100B M10×1.5 RH8 2P 5 100 15 28 7 5.5 8 6

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

71 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

JX10-L-NRT Type:5

K
Lc

JX10 Forming taps with long shank

d
2P chamfers,for blind hole fl Ln Lk

4P chamfers,for through hole L

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.
Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN10150120B M10×1.5 RH8 2P 5 120 15 28 7 5.5 8 6
MN10150150B M10×1.5 RH8 2P 5 150 15 28 7 5.5 8 6
MN10125100B M10×1.25 RH7 2P 5 100 13 30 7 5.5 8 6
MN10125120B M10×1.25 RH7 2P 5 120 13 30 7 5.5 8 6
MN10125150B M10×1.25 RH7 2P 5 150 13 30 7 5.5 8 6
MN10100100B M10×1 RH7 2P 5 100 13 30 7 5.5 8 6
MN10100120B M10×1 RH7 2P 5 120 13 30 7 5.5 8 6
MN10100150B M10×1 RH7 2P 5 150 13 30 7 5.5 8 6
MN12175100B M12×1.75 RH9 2P 5 100 17 25 8.5 6.5 9 6
MN12175120B M12×1.75 RH9 2P 5 120 17 25 8.5 6.5 9 6
MN12175150B M12×1.75 RH9 2P 5 150 17 25 8.5 6.5 9 6
MN12150100B M12×1.5 RH8 2P 5 100 17 25 8.5 6.5 9 6
MN12150120B M12×1.5 RH8 2P 5 120 17 25 8.5 6.5 9 6
MN12150150B M12×1.5 RH8 2P 5 150 17 25 8.5 6.5 9 6
MN12125100B M12×1.25 RH7 2P 5 100 13 29 8.5 6.5 9 6
MN12125120B M12×1.25 RH7 2P 5 120 13 29 8.5 6.5 9 6
MN12125150B M12×1.25 RH7 2P 5 150 13 29 8.5 6.5 9 6
MN12100100B M12×1 RH7 2P 5 100 13 29 8.5 6.5 9 6
MN12100120B M12×1 RH7 2P 5 120 13 29 8.5 6.5 9 6
MN12100150B M12×1 RH7 2P 5 150 13 29 8.5 6.5 9 6
MN14200120B M14×2 RH10 2P 5 120 20 31 10.5 8 11 6
MN14200150B M14×2 RH10 2P 5 150 20 31 10.5 8 11 6
MN14150120B M14×1.5 RH8 2P 5 120 20 31 10.5 8 11 6
MN14150150B M14×1.5 RH8 2P 5 150 20 31 10.5 8 11 6
MN14125120B M14×1.25 RH7 2P 5 120 20 31 10.5 8 11 6
MN14125150B M14×1.25 RH7 2P 5 150 20 31 10.5 8 11 6
MN14100120B M14×1 RH7 2P 5 120 20 31 10.5 8 11 6
MN14100150B M14×1 RH7 2P 5 150 20 31 10.5 8 11 6
MN16200120B M16×2 RH10 2P 5 120 20 32 12.5 10 13 6
MN16200150B M16×2 RH10 2P 5 150 20 32 12.5 10 13 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 72
 TAPS FOR STAINLESS STEEL

Type:5
JX10-L-NRT

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MN16150120B M16×1.5 RH8 2P 5 120 20 32 12.5 10 13 6
MN16150150B M16×1.5 RH8 2P 5 150 20 32 12.5 10 13 6
MN16125120B M16×1.25 RH7 2P 5 120 20 32 12.5 10 13 6
MN16125150B M16×1.25 RH7 2P 5 150 20 32 12.5 10 13 6
MN16100120B M16×1 RH7 2P 5 120 20 32 12.5 10 13 6
MN16100150B M16×1 RH7 2P 5 150 20 32 12.5 10 13 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

73 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:7

JX10-L-NRT
JX10 Forming taps with long shank Type:8

2P chamfers,for blind hole

4P chamfers,for through hole
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.
Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MNU44080P NO.4-40UNC RH4 4P 7 80 9 7 3 2.5 5 -
MNU44080B NO.4-40UNC RH4 2P 8 78 9 7 3 2.5 5 -
MNU440100P NO.4-40UNC RH4 4P 7 100 9 7 3 2.5 5 -
MNU440100B NO.4-40UNC RH4 2P 8 98 9 7 3 2.5 5 -
MNU440120P NO.4-40UNC RH4 4P 7 120 9 7 3 2.5 5 -
MNU440120B NO.4-40UNC RH4 2P 8 118 9 7 3 2.5 5 -
MNU54080P NO.5-40UNC RH4 4P 7 80 10 8 4 2.5 5 -
MNU54080B NO.5-40UNC RH4 2P 8 78 10 8 4 2.5 5 -
MNU540100P NO.5-40UNC RH4 4P 7 100 10 8 4 2.5 5 -
MNU540100B NO.5-40UNC RH4 2P 8 98 10 8 4 2.5 5 -
MNU540120P NO.5-40UNC RH4 4P 7 120 10 8 4 2.5 5 -
MNU540120B NO.5-40UNC RH4 2P 8 118 10 8 4 2.5 5 -
MNU63280P NO.6-32UNC RH7 4P 7 80 10 8 4 3.2 6 -
MNU63280B NO.6-32UNC RH7 2P 8 78 10 8 4 3.2 6 -
MNU632100P NO.6-32UNC RH7 4P 7 100 10 8 4 3.2 6 -
MNU632100B NO.6-32UNC RH7 2P 8 98 10 8 4 3.2 6 -
MNU632120P NO.6-32UNC RH7 4P 7 120 10 8 4 3.2 6 -
MNU632120B NO.6-32UNC RH7 2P 8 118 10 8 4 3.2 6 -
MNU632150P NO.6-32UNC RH7 4P 7 150 10 8 4 3.2 6 -
MNU632150B NO.6-32UNC RH7 2P 8 148 10 8 4 3.2 6 -
MNU83280P NO.8-32UNC RH7 4P 7 80 11 9 5 4 7 -
MNU83280B NO.8-32UNC RH7 2P 8 78 11 9 5 4 7 -
MNU832100P NO.8-32UNC RH7 4P 7 100 11 9 5 4 7 -
MNU832100B NO.8-32UNC RH7 2P 8 98 11 9 5 4 7 -
MNU832120P NO.8-32UNC RH7 4P 7 120 11 9 5 4 7 -
MNU832120B NO.8-32UNC RH7 2P 8 118 11 9 5 4 7 -
MNU832150P NO.8-32UNC RH7 4P 7 150 11 9 5 4 7 -
MNU832150B NO.8-32UNC RH7 2P 8 148 11 9 5 4 7 -
MNU102480P NO.10-24UNC RH7 4P 7 80 12 10 5.5 4.5 7 -
MNU102480B NO.10-24UNC RH7 2P 8 78 12 10 5.5 4.5 7 -
MNU1024100P NO.10-24UNC RH7 4P 7 100 12 10 5.5 4.5 7 -
MNU1024100B NO.10-24UNC RH7 2P 8 98 12 10 5.5 4.5 7 -
MNU1024120P NO.10-24UNC RH7 4P 7 120 12 10 5.5 4.5 7 -
MNU1024120B NO.10-24UNC RH7 2P 8 118 12 10 5.5 4.5 7 -
MNU1024150P NO.10-24UNC RH7 4P 7 150 12 10 5.5 4.5 7 -
MNU1024150B NO.10-24UNC RH7 2P 8 148 12 10 5.5 4.5 7 -

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 74
 TAPS FOR STAINLESS STEEL

JX10-L-NRT Type:5
Type:7

K
JX10 Forming taps with long shank Lc

Type:8

d
fl Ln Lk
2P chamfers,for blind hole L

4P chamfers,for through hole

◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MNU122480P NO.12-24UNC RH7 4P 7 80 12 12 5.5 4.5 7 -
MNU122480B NO.12-24UNC RH7 2P 8 78 12 12 5.5 4.5 7 -
MNU1224100P NO.12-24UNC RH7 4P 7 100 12 12 5.5 4.5 7 -
MNU1224100B NO.12-24UNC RH7 2P 8 98 12 12 5.5 4.5 7 -
MNU1224120P NO.12-24UNC RH7 4P 7 120 12 12 5.5 4.5 7 -
MNU1224120B NO.12-24UNC RH7 2P 8 118 12 12 5.5 4.5 7 -
MNU1224150P NO.12-24UNC RH7 4P 7 150 12 12 5.5 4.5 7 -
MNU1224150B NO.12-24UNC RH7 2P 8 148 12 12 5.5 4.5 7 -
MNU1420100B 1/4-20UNC RH7 2P 5 100 12 12 6 4.5 7 2
MNU1420120B 1/4-20UNC RH7 2P 5 120 12 12 6 4.5 7 2
MNU1420150B 1/4-20UNC RH7 2P 5 150 12 12 6 4.5 7 2
MNU1428100B 1/4-28UNF RH7 2P 5 100 12 12 6 4.5 7 2
MNU1428120B 1/4-28UNF RH7 2P 5 120 12 12 6 4.5 7 2
MNU1428150B 1/4-28UNF RH7 2P 5 150 12 12 6 4.5 7 2
MNU51618100B 5/16-18UNC RH8 2P 5 100 15 15 6.1 5 8 3
MNU51618120B 5/16-18UNC RH8 2P 5 120 15 15 6.1 5 8 3
MNU51618150B 5/16-18UNC RH8 2P 5 150 15 15 6.1 5 8 3
MNU51624100B 5/16-24UNF RH7 2P 5 100 11 19 6.1 5 8 3
MNU51624120B 5/16-24UNF RH7 2P 5 120 11 19 6.1 5 8 3
MNU51624150B 5/16-24UNF RH7 2P 5 150 11 19 6.1 5 8 3
MNU3816100B 3/8-16UNC RH7 2P 5 100 16 27 7 5.5 8 6
MNU3816120B 3/8-16UNC RH7 2P 5 120 16 27 7 5.5 8 6
MNU3816150B 3/8-16UNC RH7 2P 5 150 16 27 7 5.5 8 6
MNU3824100B 3/8-24UNF RH7 2P 5 100 11 32 7 5.5 8 6
MNU3824120B 3/8-24UNF RH7 2P 5 120 11 32 7 5.5 8 6
MNU3824150B 3/8-24UNF RH7 2P 5 150 11 32 7 5.5 8 6
MNU71614100B 7/16-14UNC RH8 2P 5 100 20 20 8 6 9 6
MNU71614120B 7/16-14UNC RH8 2P 5 120 20 20 8 6 9 6
MNU71614150B 7/16-14UNC RH8 2P 5 150 20 20 8 6 9 6
MNU71620100B 7/16-20UNF RH7 2P 5 100 13 27 8 6 9 6
MNU71620120B 7/16-20UNF RH7 2P 5 120 13 27 8 6 9 6
MNU71620150B 7/16-20UNF RH7 2P 5 150 13 27 8 6 9 6
MNU1213100B 1/2-13UNC RH8 2P 5 100 21 27 9 7 10 6
MNU1213120B 1/2-13UNC RH8 2P 5 120 21 27 9 7 10 6
MNU1213150B 1/2-13UNC RH8 2P 5 150 21 27 9 7 10 6

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

75 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

JX10-L-NRT Type:5

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk
2P chamfers,for blind hole
L
4P chamfers,for through hole
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wearresistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MNU1220100B 1/2-20UNF RH7 2P 5 100 13 35 9 7 10 6
MNU1220120B 1/2-20UNF RH7 2P 5 120 13 35 9 7 10 6
MNU1220150B 1/2-20UNF RH7 2P 5 150 13 35 9 7 10 6
MNU91612120B 9/16-12UNC RH9 2P 5 120 21 29 10.5 8 11 6
MNU91612150B 9/16-12UNC RH9 2P 5 150 21 29 10.5 8 11 6
MNU91618120B 9/16-18UNF RH8 2P 5 120 15 35 10.5 8 11 6
MNU91618150B 9/16-18UNF RH8 2P 5 150 15 35 10.5 8 11 6
MNU5811120B 5/8-11UNC RH10 2P 5 120 23 25 12 9 12 6
MNU5811150B 5/8-11UNC RH10 2P 5 150 23 25 12 9 12 6
MNU5818120B 5/8-18UNF RH8 2P 5 120 23 25 12 9 12 6
MNU5818150B 5/8-18UNF RH8 2P 5 150 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 76
 TAPS FOR STAINLESS STEEL

Type:13 K
Lc

d
X20-SFT fl Ln
L
Lk

X20 Spiral fluted taps Type:5

K
Lc

d
fl Ln Lk
◎ High-speed steel material; L
◎ Coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance. ISO
◎ Suitable for stainless steel 200 series, 300 series, etc. CPM M 6HX
DIN

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20S04070 M4×0.7 6HX 2.5P 13 63 9 12 4.5 3.4 6 -
X20S05080 M5×0.8 6HX 2.5P 13 70 10 15 6 4.9 8 -
X20S06100 M6×1 6HX 2.5P 13 80 10 20 6 4.9 8 -
X20S07100 M7×1 6HX 2.5P 13 80 10 20 7 5.5 8 -
X20S08125 M8×1.25 6HX 2.5P 5 90 13 22 8 6.2 9 -
X20S08100 M8×1 6HX 2.5P 5 90 13 22 8 6.2 9 -
X20S10150 M10×1.5 6HX 2.5P 5 100 15 24 10 8 11 -
X20S10125 M10×1.25 6HX 2.5P 5 100 15 24 10 8 11 -
X20S10100 M10×1 6HX 2.5P 5 100 15 24 10 8 11 -
X20S12175 M12×1.75 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12150 M12×1.5 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12125 M12×1.25 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12100 M12×1 6HX 2.5P 5 110 17 32 9 7 10 -
X20S14200 M14×2 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14150 M14×1.5 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14125 M14×1.25 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14100 M14×1 6HX 2.5P 5 110 20 33 11 9 12 -
X20S16200 M16×2 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16150 M16×1.5 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16125 M16×1.25 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16100 M16×1 6HX 2.5P 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

77 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:3

SFT45 Type:1

K
Lc

d
SFT45 Spiral fluted taps Type:5

K
fl Lk Lc
L

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MS010025 M1×0.25 P1 1.5P 1 37 4.5 - 3 2.5 3 2
MS012025 M1.2×0.25 P1 1.5P 1 37 5.5 - 3 2.5 3 2
MS014030 M1.4×0.3 P1 1.5P 1 37 6.5 - 3 2.5 3 2
MS016035 M1.6×0.35 P1 1.5P 1 37 8 - 3 2.5 3 2
MS020040 M2×0.4 P2 2.5P 1 45 11 - 3 2.5 3 2
MS025045 M2.5×0.45 P2 2.5P 1 45 12 - 3 2.5 3 2
MS030050 M3×0.5 P2 2.5P 3 50 5 13 4 3.2 6 3
MS035060 M3.5×0.6 P2 2.5P 3 50 6 13 4 3.2 6 3
MS040070 M4×0.7 P2 2.5P 3 57 9 11 5 4 7 3
MS050080 M5×0.8 P2 2.5P 3 66 8 17 5.5 4.5 7 3
MS060100 M6×1 P2 2.5P 3 69 12 12 6 4.5 7 3
MS070100 M7×1 P3 2.5P 3 78 13 10 6.2 5 8 3
MS080125 M8×1.25 P3 2.5P 5 70 13 23 6.2 5 8 3
MS080100 M8×1 P3 2.5P 5 70 13 23 6.2 5 8 3
MS100150 M10×1.5 P4 2.5P 5 75 15 28 7 5.5 8 3
MS100125 M10×1.25 P3 2.5P 5 75 13 30 7 5.5 8 3
MS100100 M10×1 P3 2.5P 5 75 13 30 7 5.5 8 3
MS120175 M12×1.75 P4 2.5P 5 82 17 25 8.5 6.5 9 3
MS120150 M12×1.5 P4 2.5P 5 82 17 25 8.5 6.5 9 3
MS120125 M12×1.25 P4 2.5P 5 82 13 29 8.5 6.5 9 3
MS120100 M12×1 P3 2.5P 5 82 13 29 8.5 6.5 9 3
MS140200 M14×2 P5 2.5P 5 88 20 31 10.5 8 11 3
MS140150 M14×1.5 P4 2.5P 5 88 20 31 10.5 8 11 3
MS140125 M14×1.25 P4 2.5P 5 88 20 31 10.5 8 11 3
MS140100 M14×1 P3 2.5P 5 88 20 31 10.5 8 11 3
MS160200 M16×2 P5 2.5P 5 95 20 32 12.5 10 13 3
MS160150 M16×1.5 P4 2.5P 5 95 20 32 12.5 10 13 3
MS160125 M16×1.25 P4 2.5P 5 95 20 32 12.5 10 13 3
MS160100 M16×1 P3 2.5P 5 95 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 78
 TAPS FOR STAINLESS STEEL

Type:3

SFT45 Type:1

K
Lc

SFT45 Spiral fluted taps

d
Type:5

K
fl Lk Lc

d
fl Ln Lk
L
◎ High-speed steel material;
◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MSU080 NO.0-80UNF P1 1.5P 1 37 10 - 3 2.5 3 Flutes
2
MSU164 NO.1-64UNC P1 1.5P 1 37 11 - 3 2.5 3 2
MSU256 NO.2-56UNC P1 2.5P 1 45 12 - 3 2.5 3 2
MSU348 NO.3-48UNC P1 2.5P 1 45 14 - 3 2.5 3 2
MSU440 NO.4-40UNC P2 2.5P 3 45 6 10 3 2.5 3 3
MSU540 NO.5-40UNC P2 2.5P 3 50 7 12 4 3.2 6 3
MSU632 NO.6-32UNC P2 2.5P 3 50 8 12 4 3.2 6 3
MSU832 NO.8-32UNC P2 2.5P 3 57 8 13.5 5 4 7 3
MSU1024 NO.10-24UNC P2 2.5P 3 66 10 16 5.5 4.5 7 3
MSU1032 NO.10-32UNF P2 2.5P 3 66 10 16 5.5 4.5 7 3
MSU1224 NO.12-24UNC P2 2.5P 3 66 10 16 5.5 4.5 7 3
MSU1228 NO.12-28UNF P2 2.5P 3 66 10 16 5.5 4.5 7 3
MSU1420 1/4-20UNC P2 2.5P 3 69 12 17 6 4.5 7 3
MSU1428 1/4-28UNF P2 2.5P 3 69 12 17 6 4.5 7 3
MSU51618 5/16-18UNC P3 2.5P 5 70 15 15 6.1 5 8 3
MSU51624 5/16-24UNF P3 2.5P 5 70 11 19 6.1 5 8 3
MSU3816 3/8-16UNC P3 2.5P 5 75 16 27 7 5.5 8 3
MSU3824 3/8-24UNF P3 2.5P 5 75 11 32 7 5.5 8 3
MSU71614 7/16-14UNC P4 2.5P 5 80 20 20 8 6 9 3
MSU71620 7/16-20UNF P3 2.5P 5 80 13 27 8 6 9 3
MSU1213 1/2-13UNC P4 2.5P 5 85 21 27 9 7 10 3
MSU1220 1/2-20UNF P3 2.5P 5 85 13 35 9 7 10 3
MSU91612 9/16-12UNC P4 2.5P 5 90 21 29 10.5 8 11 3
MSU91618 9/16-18UNF P3 2.5P 5 90 15 35 10.5 8 11 3
MSU5811 5/8-11UNC P4 2.5P 5 95 23 25 12 9 12 3
MSU5818 5/8-18UNF P3 2.5P 5 95 23 25 12 9 12 3
Tolerances under 2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

79 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:3
Lc

S-SFT
Spiral fluted taps with fine thread

K
Lc Type:5

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MS030035 M3×0.35 P2 2.5P 3 50 5 13 4 3.2 6 3
MS035035 M3.5×0.35 P2 2.5P 3 50 6 13 4 3.2 6 3
MS040050 M4×0.5 P2 2.5P 3 57 9 11 5 4 7 3
MS050050 M5×0.5 P2 2.5P 3 66 8 17 5.5 4.5 7 3
MS060050 M6×0.5 P2 2.5P 3 69 12 12 6 4.5 7 3
MS060075 M6×0.75 P2 2.5P 3 69 12 12 6 4.5 7 3
MS070075 M7×0.75 P3 2.5P 3 78 13 10 6.2 5 8 3
MS080075 M8×0.75 P3 2.5P 5 70 13 23 6.2 5 8 3
MS100075 M10×0.75 P3 2.5P 5 75 13 30 7 5.5 8 3
MSU640 NO.6-40UNF P2 2.5P 3 50 8 12 4 3.2 6 3
MSU836 NO.8-36UNF P2 2.5P 3 57 8 13.5 5 4 7 3
Tolerances under 6H/2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 80
 TAPS FOR STAINLESS STEEL

Type:5

K
Lc

L-SFT

d
fl Ln Lk

SFT Spiral fluted taps with long shank L

Type:7

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MS020480 M2×0.4 P2 2.5P 7 80 9 6 3 2.5 5 2
MS0204100 M2×0.4 P2 2.5P 7 100 9 6 3 2.5 5 2
MS02504580 M2.5×0.45 P2 2.5P 7 80 9 6 3 2.5 5 2
MS025045100 M2.5×0.45 P2 2.5P 7 100 9 6 3 2.5 5 2
MS030580 M3×0.5 P2 2.5P 7 80 12 7 4 3.2 6 3
MS0305100 M3×0.5 P2 2.5P 7 100 12 7 4 3.2 6 3
MS0305120 M3×0.5 P2 2.5P 7 120 12 7 4 3.2 6 3
MS0305150 M3×0.5 P2 2.5P 7 150 12 7 4 3.2 6 3
MS0350680 M3.5×0.6 P2 2.5P 7 80 13 7 4 3.2 6 3
MS03506100 M3.5×0.6 P2 2.5P 7 100 13 7 4 3.2 6 3
MS03506120 M3.5×0.6 P2 2.5P 7 120 13 7 4 3.2 6 3
MS03506150 M3.5×0.6 P2 2.5P 7 150 13 7 4 3.2 6 3
MS040780 M4×0.7 P2 2.5P 7 80 14 7 5 4 7 3
MS0407100 M4×0.7 P2 2.5P 7 100 14 7 5 4 7 3
MS0407120 M4×0.7 P2 2.5P 7 120 14 7 5 4 7 3
MS0407150 M4×0.7 P2 2.5P 7 150 14 7 5 4 7 3
MS050880 M5×0.8 P2 2.5P 7 80 16 9 5.5 4.5 7 3
MS0508100 M5×0.8 P2 2.5P 7 100 16 9 5.5 4.5 7 3
MS0508120 M5×0.8 P2 2.5P 7 120 16 9 5.5 4.5 7 3
MS0508150 M5×0.8 P2 2.5P 7 150 16 9 5.5 4.5 7 3
MS061080 M6×1 P2 2.5P 7 80 19.5 9.5 6 4.5 7 3
MS0610100 M6×1 P2 2.5P 7 100 19.5 9.5 6 4.5 7 3
MS0610120 M6×1 P2 2.5P 7 120 19.5 9.5 6 4.5 7 3
MS0610150 M6×1 P2 2.5P 7 150 19.5 9.5 6 4.5 7 3
MS0710100 M7×1 P3 2.5P 7 100 13 10 6.2 5 8 3
MS0710120 M7×1 P3 2.5P 7 120 13 10 6.2 5 8 3
MS0710150 M7×1 P3 2.5P 7 150 13 10 6.2 5 8 3
MS08125100 M8×1.25 P3 2.5P 5 100 22 15 6.2 5 8 3
MS08125120 M8×1.25 P3 2.5P 5 120 22 15 6.2 5 8 3
MS08125150 M8×1.25 P3 2.5P 5 150 22 15 6.2 5 8 3
MS0810100 M8×1 P3 2.5P 5 100 22 15 6.2 5 8 3
MS0810120 M8×1 P3 2.5P 5 120 22 15 6.2 5 8 3
MS0810150 M8×1 P3 2.5P 5 150 22 15 6.2 5 8 3
MS1015100 M10×1.5 P4 2.5P 5 100 24 19 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

81 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

S-SFT Type:5

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MS1015120 M10×1.5 P4 2.5P 5 120 24 19 7 5.5 8 3
MS1015150 M10×1.5 P4 2.5P 5 150 24 19 7 5.5 8 3
MS10125100 M10×1.25 P3 2.5P 5 100 24 19 7 5.5 8 3
MS10125120 M10×1.25 P3 2.5P 5 120 24 19 7 5.5 8 3
MS10125150 M10×1.25 P3 2.5P 5 150 24 19 7 5.5 8 3
MS1010100 M10×1 P3 2.5P 5 100 24 19 7 5.5 8 3
MS1010120 M10×1 P3 2.5P 5 120 24 19 7 5.5 8 3
MS1010150 M10×1 P3 2.5P 5 150 24 19 7 5.5 8 3
MS12175100 M12×1.75 P4 2.5P 5 100 29 17 8.5 6.5 9 3
MS12175120 M12×1.75 P4 2.5P 5 120 29 17 8.5 6.5 9 3
MS12175150 M12×1.75 P4 2.5P 5 150 29 17 8.5 6.5 9 3
MS1215100 M12×1.5 P4 2.5P 5 100 29 17 8.5 6.5 9 3
MS1215120 M12×1.5 P4 2.5P 5 120 29 17 8.5 6.5 9 3
MS1215150 M12×1.5 P4 2.5P 5 150 29 17 8.5 6.5 9 3
MS12125100 M12×1.25 P4 2.5P 5 100 29 17 8.5 6.5 9 3
MS12125120 M12×1.25 P4 2.5P 5 120 29 17 8.5 6.5 9 3
MS12125150 M12×1.25 P4 2.5P 5 150 29 17 8.5 6.5 9 3
MS1210100 M12×1 P3 2.5P 5 100 29 17 8.5 6.5 9 3
MS1210120 M12×1 P3 2.5P 5 120 29 17 8.5 6.5 9 3
MS1210150 M12×1 P3 2.5P 5 150 29 17 8.5 6.5 9 3
MS1420120 M14×2 P5 2.5P 5 120 20 31 10.5 8 11 3
MS1420150 M14×2 P5 2.5P 5 150 20 31 10.5 8 11 3
MS1415120 M14×1.5 P4 2.5P 5 120 20 31 10.5 8 11 3
MS1415150 M14×1.5 P4 2.5P 5 150 20 31 10.5 8 11 3
MS14125120 M14×1.25 P4 2.5P 5 120 20 31 10.5 8 11 3
MS14125150 M14×1.25 P4 2.5P 5 150 20 31 10.5 8 11 3
MS1410120 M14×1 P3 2.5P 5 120 20 31 10.5 8 11 3
MS1410150 M14×1 P3 2.5P 5 150 20 31 10.5 8 11 3
MS1620120 M16×2 P5 2.5P 5 120 20 32 12.5 10 13 3
MS1620150 M16×2 P5 2.5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 82
 TAPS FOR STAINLESS STEEL

L-SFT Type:5

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MS1615120 M16×1.5 P4 2.5P 5 120 20 32 12.5 10 13 3
MS1615150 M16×1.5 P4 2.5P 5 150 20 32 12.5 10 13 3
MS16125120 M16×1.25 P4 2.5P 5 120 20 32 12.5 10 13 3
MS16125150 M16×1.25 P4 2.5P 5 150 20 32 12.5 10 13 3
MS1610120 M16×1 P3 2.5P 5 120 20 32 12.5 10 13 3
MS1610150 M16×1 P3 2.5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

83 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:5

K
Lc

L-SFT

d
fl Ln Lk
L
SFT Spiral fluted taps with long shank Type:7

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MSU44080 NO.4-40UNC P2 2.5P 7 80 10 6 3 2.5 5 3
MSU440100 NO.4-40UNC P2 2.5P 7 100 10 6 3 2.5 5 3
MSU54080 NO.5-40UNC P2 2.5P 7 80 12 7 4 3.2 6 3
MSU540100 NO.5-40UNC P2 2.5P 7 100 12 7 4 3.2 6 3
MSU63280 NO.6-32UNC P2 2.5P 7 80 13 7 4 3.2 6 3
MSU632100 NO.6-32UNC P2 2.5P 7 100 13 7 4 3.2 6 3
MSU632120 NO.6-32UNC P2 2.5P 7 120 13 7 4 3.2 6 3
MSU632150 NO.6-32UNC P2 2.5P 7 150 13 7 4 3.2 6 3
MSU83280 NO.8-32UNC P2 2.5P 7 80 13.5 8 5 4 7 3
MSU832100 NO.8-32UNC P2 2.5P 7 100 13.5 8 5 4 7 3
MSU832120 NO.8-32UNC P2 2.5P 7 120 13.5 8 5 4 7 3
MSU832150 NO.8-32UNC P2 2.5P 7 150 13.5 8 5 4 7 3
MSU102480 NO.10-24UNC P2 2.5P 7 80 16.5 9.5 5.5 4.5 7 3
MSU1024100 NO.10-24UNC P2 2.5P 7 100 16.5 9.5 5.5 4.5 7 3
MSU1024120 NO.10-24UNC P2 2.5P 7 120 16.5 9.5 5.5 4.5 7 3
MSU1024150 NO.10-24UNC P2 2.5P 7 150 16.5 9.5 5.5 4.5 7 3
MSU122480 NO.12-24UNC P2 2.5P 7 80 16.5 9.5 5.5 4.5 7 3
MSU1224100 NO.12-24UNC P2 2.5P 7 100 16.5 9.5 5.5 4.5 7 3
MSU1224120 NO.12-24UNC P2 2.5P 7 120 16.5 9.5 5.5 4.5 7 3
MSU1224150 NO.12-24UNC P2 2.5P 7 150 16.5 9.5 5.5 4.5 7 3
MSU142080 1/4-20UNC P2 2.5P 7 80 19.5 9.5 6 4.5 7 3
MSU1420100 1/4-20UNC P2 2.5P 7 100 19.5 9.5 6 4.5 7 3
MSU1420120 1/4-20UNC P2 2.5P 7 120 19.5 9.5 6 4.5 7 3
MSU1420150 1/4-20UNC P2 2.5P 7 150 19.5 9.5 6 4.5 7 3
MSU51618100 5/16-18UNC P3 2.5P 5 100 23 15 6.1 5 8 3
MSU51618120 5/16-18UNC P3 2.5P 5 120 23 15 6.1 5 8 3
MSU51618150 5/16-18UNC P3 2.5P 5 150 23 15 6.1 5 8 3
MSU51624100 5/16-24UNF P3 2.5P 5 100 23 15 6.1 5 8 3
MSU51624120 5/16-24UNF P3 2.5P 5 120 23 15 6.1 5 8 3
MSU51624140 5/16-24UNF P3 2.5P 5 150 23 15 6.1 5 8 3
MSU3816100 3/8-16UNC P3 2.5P 5 100 25 18 7 5.5 8 3
MSU3816120 3/8-16UNC P3 2.5P 5 120 25 18 7 5.5 8 3
MSU3816150 3/8-16UNC P3 2.5P 5 150 25 18 7 5.5 8 3
MSU3824100 3/8-24UNF P3 2.5P 5 100 25 18 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 84
 TAPS FOR STAINLESS STEEL

L-SFT Type:5

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MSU3824120 3/8-24UNF P3 2.5P 5 120 25 18 7 5.5 8 3
MSU3824150 3/8-24UNF P3 2.5P 5 150 25 18 7 5.5 8 3
MSU71614100 7/16-14UNC P4 2.5P 5 100 29 16 8 6 9 3
MSU71614120 7/16-14UNC P4 2.5P 5 120 29 16 8 6 9 3
MSU71614150 7/16-14UNC P4 2.5P 5 150 29 16 8 6 9 3
MSU71620100 7/16-20UNF P3 2.5P 5 100 29 16 8 6 9 3
MSU71620120 7/16-20UNF P3 2.5P 5 120 29 16 8 6 9 3
MSU71620150 7/16-20UNF P3 2.5P 5 150 29 16 8 6 9 3
MSU1213100 1/2-13UNC P4 2.5P 5 100 30 18 9 7 10 3
MSU1213120 1/2-13UNC P4 2.5P 5 120 30 18 9 7 10 3
MSU1213150 1/2-13UNC P4 2.5P 5 150 30 18 9 7 10 3
MSU1220100 1/2-20UNF P3 2.5P 5 100 30 18 9 7 10 3
MSU1220120 1/2-20UNF P3 2.5P 5 120 30 18 9 7 10 3
MSU1220150 1/2-20UNF P3 2.5P 5 150 30 18 9 7 10 3
MSU91612120 9/16-12UNC P4 2.5P 5 120 30 20 10.5 8 11 3
MSU91612150 9/16-12UNC P4 2.5P 5 150 30 20 10.5 8 11 3
MSU91618120 9/16-18UNF P3 2.5P 5 120 30 20 10.5 8 11 3
MSU91618150 9/16-18UNF P3 2.5P 5 150 30 20 10.5 8 11 3
MSU5811120 5/8-11UNC P4 2.5P 5 120 23 25 12 9 12 3
MSU5811150 5/8-11UNC P4 2.5P 5 150 23 25 12 9 12 3
MSU5818120 5/8-18UNF P3 2.5P 5 120 23 25 12 9 12 3
MSU5818150 5/8-18UNF P3 2.5P 5 150 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

85 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:13 K
Lc

d
X20-POT fl Ln
L
Lk

X20 Spiral pointed taps Type:5

K
Lc

d
fl Ln Lk
◎ High-speed steel material; L

◎ Coating, suitable for difficult to machine stainless steel,

excellent processing characteristics and wear resistance. CPM M ISO DIN
◎ Suitable for stainless steel 200 series, 300 series, etc. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20P04070 M4×0.7 6HX 5P 13 63 9 12 4.5 3.4 6 -
X20P05080 M5×0.8 6HX 5P 13 70 10 15 6 4.9 8 -
X20P06100 M6×1 6HX 5P 13 80 10 20 6 4.9 8 -
X20P07100 M7×1 6HX 5P 13 80 10 20 7 5.5 8 -
X20P08125 M8×1.25 6HX 5P 5 90 13 22 8 6.2 9 -
X20P08100 M8×1 6HX 5P 5 90 13 22 8 6.2 9 -
X20P10150 M10×1.5 6HX 5P 5 100 15 24 10 8 11 -
X20P10125 M10×1.25 6HX 5P 5 100 15 24 10 8 11 -
X20P10100 M10×1 6HX 5P 5 100 15 24 10 8 11 -
X20P12175 M12×1.75 6HX 5P 5 110 17 32 9 7 10 -
X20P12150 M12×1.5 6HX 5P 5 110 17 32 9 7 10 -
X20P12125 M12×1.25 6HX 5P 5 110 17 32 9 7 10 -
X20P12100 M12×1 6HX 5P 5 110 17 32 9 7 10 -
X20P14200 M14×2 6HX 5P 5 110 20 33 11 9 12 -
X20P14150 M14×1.5 6HX 5P 5 110 20 33 11 9 12 -
X20P14125 M14×1.25 6HX 5P 5 110 20 33 11 9 12 -
X20P14100 M14×1 6HX 5P 5 110 20 33 11 9 12 -
X20P16200 M16×2 6HX 5P 5 110 20 34 12 9 12 -
X20P16150 M16×1.5 6HX 5P 5 110 20 34 12 9 12 -
X20P16125 M16×1.25 6HX 5P 5 110 20 34 12 9 12 -
X20P16100 M16×1 6HX 5P 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 86
 TAPS FOR STAINLESS STEEL

Type:3
Lc

POT Type:1

K
Lc

Spiral pointed taps Type:5

K
d
Lc

fl Lk

d
L
fl Ln Lk

◎ High-speed steel material;

L

◎YC-200 coating, suitable for difficult to machine stainless

steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MP010025 M1×0.25 P1 5P 1 37 4.5 - 3 2.5 3 2
MP012025 M1.2×0.25 P1 5P 1 37 5.5 - 3 2.5 3 2
MP014030 M1.4×0.3 P1 5P 1 37 9 - 3 2.5 3 2
MP016035 M1.6×0.35 P2 5P 1 37 8 - 3 2.5 3 2
MP020040 M2×0.4 P2 5P 1 45 11 - 3 2.5 3 2
MP025045 M2.5×0.45 P2 5P 1 45 12 - 3 2.5 3 2
MP030050 M3×0.5 P2 5P 3 50 12 7 4 3.2 6 3
MP035060 M3.5×0.6 P2 5P 3 50 13 7 4 3.2 6 3
MP040070 M4×0.7 P2 5P 3 57 14 7 5 4 7 3
MP050080 M5×0.8 P2 5P 3 66 16 9 5.5 4.5 7 3
MP060100 M6×1 P2 5P 3 69 19.5 9.5 6 4.5 7 3
MP070100 M7×1 P3 5P 3 78 13 10 6.2 5 8 3
MP080125 M8×1.25 P3 5P 5 70 22 15 6.2 5 8 3
MP080100 M8×1 P3 5P 5 70 22 15 6.2 5 8 3
MP100150 M10×1.5 P4 5P 5 75 24 19 7 5.5 8 3
MP100125 M10×1.25 P3 5P 5 75 24 19 7 5.5 8 3
MP100100 M10×1 P3 5P 5 75 24 19 7 5.5 8 3
MP120175 M12×1.75 P4 5P 5 82 29 17 8.5 6.5 9 3
MP120150 M12×1.5 P4 5P 5 82 29 17 8.5 6.5 9 3
MP120125 M12×1.25 P4 5P 5 82 29 17 8.5 6.5 9 3
MP120100 M12×1 P3 5P 5 82 29 17 8.5 6.5 9 3
MP140200 M14×2 P5 5P 5 88 20 31 10.5 8 11 3
MP140150 M14×1.5 P4 5P 5 88 20 31 10.5 8 11 3
MP140125 M14×1.25 P4 5P 5 88 20 31 10.5 8 11 3
MP140100 M14×1 P3 5P 5 88 20 31 10.5 8 11 3
MP160200 M16×2 P5 5P 5 95 20 32 12.5 10 13 3
MP160150 M16×1.5 P4 5P 5 95 20 32 12.5 10 13 3
MP160125 M16×1.25 P4 5P 5 95 20 32 12.5 10 13 3
MP160100 M16×1 P3 5P 5 95 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

87 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:3
Lc

POT Type:1

K
Lc

Spiral pointed taps Type:5

K
d
Lc

fl Lk

d
L
fl Ln Lk

◎ High-speed steel material; L

◎ Coating, suitable for difficult to machine stainless steel,

excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MPU080 NO.0-80UNF P1 5P 1 37 10 - 3 2.5 3 2
MPU164 NO.1-64UNC P1 5P 1 37 11 - 3 2.5 3 2
MPU256 NO.2-56UNC P1 5P 1 45 12 - 3 2.5 3 2
MPU348 NO.3-48UNC P1 5P 1 45 14 - 3 2.5 3 2
MPU440 NO.4-40UNC P2 5P 1 45 13 - 3 2.5 3 2
MPU540 NO.5-40UNC P2 5P 3 50 12 7 4 3.2 6 3
MPU632 NO.6-32UNC P2 5P 3 50 13 7 4 3.2 6 3
MPU832 NO.8-32UNC P2 5P 3 57 13.5 8 5 4 7 3
MPU1024 NO.10-24UNC P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
MPU1032 NO.10-32UNF P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
MPU1224 NO.12-24UNC P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
MPU1228 NO.12-28UNF P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
MPU1420 1/4-20UNC P2 5P 3 69 19.5 9.5 6 4.5 7 3
MPU1428 1/4-28UNF P2 5P 3 69 19.5 9.5 6 4.5 7 3
MPU51618 5/16-18UNC P3 5P 5 70 23 15 6.1 5 8 3
MPU51624 5/16-24UNF P3 5P 5 70 23 15 6.1 5 8 3
MPU3816 3/8-16UNC P3 5P 5 75 25 18 7 5.5 8 3
MPU3824 3/8-24UNF P3 5P 5 75 25 18 7 5.5 8 3
MPU71614 7/16-14UNC P4 5P 5 80 29 16 8 6 9 3
MPU71620 7/16-20UNF P3 5P 5 80 29 16 8 6 9 3
MPU1213 1/2-13UNC P4 5P 5 85 30 18 9 7 10 3
MPU1220 1/2-20UNF P3 5P 5 85 30 18 9 7 10 3
MPU91612 9/16-12UNC P4 5P 5 90 30 20 10.5 8 11 3
MPU91618 9/16-18UNF P3 5P 5 90 30 20 10.5 8 11 3
MPU5811 5/8-11UNC P4 5P 5 95 23 25 12 9 12 3
MPU5818 5/8-18UNF P3 5P 5 95 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 88
 TAPS FOR STAINLESS STEEL

Type:3
Lc

S-POT
Type:5
Spiral pointed taps with fine thread

K
Lc

d
fl Ln Lk

◎ High-speed steel material; L

◎YC-200 coating, suitable for difficult to machine stainless

steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MP030035 M3×0.35 P2 5P 3 50 5 13 4 3.2 6 3
MP035035 M3.5×0.35 P2 5P 3 50 6 13 4 3.2 6 3
MP040050 M4×0.5 P2 5P 3 57 9 11 5 4 7 3
MP050050 M5×0.5 P2 5P 3 66 8 17 5.5 4.5 7 3
MP060050 M6×0.5 P2 5P 3 69 12 12 6 4.5 7 3
MP060075 M6×0.75 P2 5P 3 69 12 12 6 4.5 7 3
MP070075 M7×0.75 P3 5P 3 78 13 10 6.2 5 8 3
MP080075 M8×0.75 P3 5P 5 70 13 23 6.2 5 8 3
MP100075 M10×0.75 P3 5P 5 75 13 30 7 5.5 8 3
MPU640 NO.6-40UNF P2 5P 3 50 8 12 4 3.2 6 3
MPU836 NO.8-36UNF P2 5P 3 57 8 13.5 5 4 7 3
Tolerances under 6H/2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

89 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:5

K
Lc

L-POT

d
fl Ln Lk
L
Spiral pointed taps with long shank Type:7

◎ High-speed steel material;

◎YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MP020480 M2×0.4 P2 5P 7 80 9 6 3 2.5 5 2
MP0204100 M2×0.4 P2 5P 7 100 9 6 3 2.5 5 2
MP02504580 M2.5×0.45 P2 5P 7 80 9 6 3 2.5 5 2
MP025045100 M2.5×0.45 P2 5P 7 100 9 6 3 2.5 5 2
MP030580 M3×0.5 P2 5P 7 80 12 7 4 3.2 6 3
MP0305100 M3×0.5 P2 5P 7 100 12 7 4 3.2 6 3
MP0305120 M3×0.5 P2 5P 7 120 12 7 4 3.2 6 3
MP0305150 M3×0.5 P2 5P 7 150 12 7 4 3.2 6 3
MP0350680 M3.5×0.6 P2 5P 7 80 13 7 4 3.2 6 3
MP03506100 M3.5×0.6 P2 5P 7 100 13 7 4 3.2 6 3
MP03506120 M3.5×0.6 P2 5P 7 120 13 7 4 3.2 6 3
MP03506150 M3.5×0.6 P2 5P 7 150 13 7 4 3.2 6 3
MP040780 M4×0.7 P2 5P 7 80 14 7 5 4 7 3
MP0407100 M4×0.7 P2 5P 7 100 14 7 5 4 7 3
MP0407120 M4×0.7 P2 5P 7 120 14 7 5 4 7 3
MP0407150 M4×0.7 P2 5P 7 150 14 7 5 4 7 3
MP050880 M5×0.8 P2 5P 7 80 16 9 5.5 4.5 7 3
MP0508100 M5×0.8 P2 5P 7 100 16 9 5.5 4.5 7 3
MP0508120 M5×0.8 P2 5P 7 120 16 9 5.5 4.5 7 3
MP0508150 M5×0.8 P2 5P 7 150 16 9 5.5 4.5 7 3
MP061080 M6×1 P2 5P 7 80 19.5 9.5 6 4.5 7 3
MP0610100 M6×1 P2 5P 7 100 19.5 9.5 6 4.5 7 3
MP0610120 M6×1 P2 5P 7 120 19.5 9.5 6 4.5 7 3
MP0610150 M6×1 P2 5P 7 150 19.5 9.5 6 4.5 7 3
MP0710100 M7×1 P3 5P 7 100 13 10 6.2 5 8 3
MP0710120 M7×1 P3 5P 7 120 13 10 6.2 5 8 3
MP0710150 M7×1 P3 5P 7 150 13 10 6.2 5 8 3
MP08125100 M8×1.25 P3 5P 5 100 22 15 6.2 5 8 3
MP08125120 M8×1.25 P3 5P 5 120 22 15 6.2 5 8 3
MP08125150 M8×1.25 P3 5P 5 150 22 15 6.2 5 8 3
MP0810100 M8×1 P3 5P 5 100 22 15 6.2 5 8 3
MP0810120 M8×1 P3 5P 5 120 22 15 6.2 5 8 3
MP0810150 M8×1 P3 5P 5 150 22 15 6.2 5 8 3
MP1015100 M10×1.5 P4 5P 5 100 24 19 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 90
 TAPS FOR STAINLESS STEEL

L-POT Type:5

K
Lc

Spiral pointed taps with long shank

d
fl Ln Lk
L
◎ High-speed steel material;
◎YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MP1015120 M10×1.5 P4 5P 5 120 24 19 7 5.5 8 3
MP1015150 M10×1.5 P4 5P 5 150 24 19 7 5.5 8 3
MP10125100 M10×1.25 P3 5P 5 100 24 19 7 5.5 8 3
MP10125120 M10×1.25 P3 5P 5 120 24 19 7 5.5 8 3
MP10125150 M10×1.25 P3 5P 5 150 24 19 7 5.5 8 3
MP1010100 M10×1 P3 5P 5 100 24 19 7 5.5 8 3
MP1010120 M10×1 P3 5P 5 120 24 19 7 5.5 8 3
MP1010150 M10×1 P3 5P 5 150 24 19 7 5.5 8 3
MP12175100 M12×1.75 P4 5P 5 100 29 17 8.5 6.5 9 3
MP12175120 M12×1.75 P4 5P 5 120 29 17 8.5 6.5 9 3
MP12175150 M12×1.75 P4 5P 5 150 29 17 8.5 6.5 9 3
MP1215100 M12×1.5 P4 5P 5 100 29 17 8.5 6.5 9 3
MP1215120 M12×1.5 P4 5P 5 120 29 17 8.5 6.5 9 3
MP1215150 M12×1.5 P4 5P 5 150 29 17 8.5 6.5 9 3
MP12125100 M12×1.25 P4 5P 5 100 29 17 8.5 6.5 9 3
MP12125120 M12×1.25 P4 5P 5 120 29 17 8.5 6.5 9 3
MP12125150 M12×1.25 P4 5P 5 150 29 17 8.5 6.5 9 3
MP1210100 M12×1 P3 5P 5 100 29 17 8.5 6.5 9 3
MP1210120 M12×1 P3 5P 5 120 29 17 8.5 6.5 9 3
MP1210150 M12×1 P3 5P 5 150 29 17 8.5 6.5 9 3
MP1420120 M14×2 P5 5P 5 120 20 31 10.5 8 11 3
MP1420150 M14×2 P5 5P 5 150 20 31 10.5 8 11 3
MP1415120 M14×1.5 P4 5P 5 120 20 31 10.5 8 11 3
MP1415150 M14×1.5 P4 5P 5 150 20 31 10.5 8 11 3
MP14125120 M14×1.25 P4 5P 5 120 20 31 10.5 8 11 3
MP14125150 M14×1.25 P4 5P 5 150 20 31 10.5 8 11 3
MP1410120 M14×1 P3 5P 5 120 20 31 10.5 8 11 3
MP1410150 M14×1 P3 5P 5 150 20 31 10.5 8 11 3
MP1620120 M16×2 P5 5P 5 120 20 32 12.5 10 13 3
MP1620150 M16×2 P5 5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

91 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

L-POT Type:5

K
Lc

Spiral pointed taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MP1615120 M16×1.5 P4 5P 5 120 20 32 12.5 10 13 3
MP1615150 M16×1.5 P4 5P 5 150 20 32 12.5 10 13 3
MP16125120 M16×1.25 P4 5P 5 120 20 32 12.5 10 13 3
MP16125150 M16×1.25 P4 5P 5 150 20 32 12.5 10 13 3
MP1610120 M16×1 P3 5P 5 120 20 32 12.5 10 13 3
MP1610150 M16×1 P3 5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 92
 TAPS FOR STAINLESS STEEL

Type:5

K
Lc

d
L-POT fl Ln
L
Lk

Type:7
Spiral pointed taps with long shank
◎ High-speed steel material;
◎ YC-200 coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MPU44080 NO.4-40UNC P2 5P 7 80 10 6 3 2.5 5 2
MPU440100 NO.4-40UNC P2 5P 7 100 10 6 3 2.5 5 2
MPU54080 NO.5-40UNC P2 5P 7 80 12 7 4 3.2 6 3
MPU540100 NO.5-40UNC P2 5P 7 100 12 7 4 3.2 6 3
MPU63280 NO.6-32UNC P2 5P 7 80 13 7 4 3.2 6 3
MPU632100 NO.6-32UNC P2 5P 7 100 13 7 4 3.2 6 3
MPU632120 NO.6-32UNC P2 5P 7 120 13 7 4 3.2 6 3
MPU632150 NO.6-32UNC P2 5P 7 150 13 7 4 3.2 6 3
MPU83280 NO.8-32UNC P2 5P 7 80 13.5 8 5 4 7 3
MPU832100 NO.8-32UNC P2 5P 7 100 13.5 8 5 4 7 3
MPU832120 NO.8-32UNC P2 5P 7 120 13.5 8 5 4 7 3
MPU832150 NO.8-32UNC P2 5P 7 150 13.5 8 5 4 7 3
MPU102480 NO.10-24UNC P2 5P 7 80 16.5 9.5 5.5 4.5 7 3
MPU1024100 NO.10-24UNC P2 5P 7 100 16.5 9.5 5.5 4.5 7 3
MPU1024120 NO.10-24UNC P2 5P 7 120 16.5 9.5 5.5 4.5 7 3
MPU1024150 NO.10-24UNC P2 5P 7 150 16.5 9.5 5.5 4.5 7 3
MPU122480 NO.12-24UNC P2 5P 7 80 16.5 9.5 5.5 4.5 7 3
MPU1224100 NO.12-24UNC P2 5P 7 100 16.5 9.5 5.5 4.5 7 3
MPU1224120 NO.12-24UNC P2 5P 7 120 16.5 9.5 5.5 4.5 7 3
MPU1224150 NO.12-24UNC P2 5P 7 150 16.5 9.5 5.5 4.5 7 3
MPU142080 1/4-20UNC P2 5P 7 80 19.5 9.5 6 4.5 7 3
MPU1420100 1/4-20UNC P2 5P 7 100 19.5 9.5 6 4.5 7 3
MPU1420120 1/4-20UNC P2 5P 7 120 19.5 9.5 6 4.5 7 3
MPU1420150 1/4-20UNC P2 5P 7 150 19.5 9.5 6 4.5 7 3
MPU51618100 5/16-18UNC P3 5P 5 100 23 15 6.1 5 8 3
MPU51618120 5/16-18UNC P3 5P 5 120 23 15 6.1 5 8 3
MPU51618150 5/16-18UNC P3 5P 5 150 23 15 6.1 5 8 3
MPU51624100 5/16-24UNF P3 5P 5 100 23 15 6.1 5 8 3
MPU51624120 5/16-24UNF P3 5P 5 120 23 15 6.1 5 8 3
MPU51624150 5/16-24UNF P3 5P 5 150 23 15 6.1 5 8 3
MPU3816100 3/8-16UNC P3 5P 5 100 25 18 7 5.5 8 3
MPU3816120 3/8-16UNC P3 5P 5 120 25 18 7 5.5 8 3
MPU3816150 3/8-16UNC P3 5P 5 150 25 18 7 5.5 8 3
MPU3824100 3/8-24UNF P3 5P 5 100 25 18 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

93 NINGBO NICHE TOOLS CO. LTD

TAPS FOR STAINLESS STEEL

Type:5
L-POT

K
Lc

Spiral pointed taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless
steel,excellent processing characteristics and wear resistance.
◎ Suitable for stainless steel 200 series, 300 series, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
MPU3824120 3/8-24UNF P3 5P 5 120 25 18 7 5.5 8 3
MPU3824150 3/8-24UNF P3 5P 5 150 25 18 7 5.5 8 3
MPU71614100 7/16-14UNC P4 5P 5 100 29 16 8 6 9 3
MPU71614120 7/16-14UNC P4 5P 5 120 29 16 8 6 9 3
MPU71614150 7/16-14UNC P4 5P 5 150 29 16 8 6 9 3
MPU71620100 7/16-20UNF P3 5P 5 100 29 16 8 6 9 3
MPU71620120 7/16-20UNF P3 5P 5 120 29 16 8 6 9 3
MPU71620150 7/16-20UNF P3 5P 5 150 29 16 8 6 9 3
MPU1213100 1/2-13UNC P4 5P 5 100 30 18 9 7 10 3
MPU1213120 1/2-13UNC P4 5P 5 120 30 18 9 7 10 3
MPU1213150 1/2-13UNC P4 5P 5 150 30 18 9 7 10 3
MPU1220100 1/2-20UNF P3 5P 5 100 30 18 9 7 10 3
MPU1220120 1/2-20UNF P3 5P 5 120 30 18 9 7 10 3
MPU1220150 1/2-20UNF P3 5P 5 150 30 18 9 7 10 3
MPU91612120 9/16-12UNC P4 5P 5 120 30 20 10.5 8 11 3
MPU91612150 9/16-12UNC P4 5P 5 150 30 20 10.5 8 11 3
MPU91618120 9/16-18UNF P3 5P 5 120 30 20 10.5 8 11 3
MPU91618150 9/16-18UNF P3 5P 5 150 30 20 10.5 8 11 3
MPU5811120 5/8-11UNC P4 5P 5 120 23 25 12 9 12 3
MPU5811150 5/8-11UNC P4 5P 5 150 23 25 12 9 12 3
MPU5818120 5/8-18UNF P3 5P 5 120 23 25 12 9 12 3
MPU5818150 5/8-18UNF P3 5P 5 150 23 25 12 9 12 3
Tolerances under 2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - ● - - - - - - - -

[Link] 94
95 NINGBO NICHE TOOLS CO. LTD
 INDEX
TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

X20 FORMING TAPS ........................................................................................................... 97

JX10 FORMING TAPS .........................................................................................................101
JX10 FORMING TAPS WITH FINE THREAD...................................................................104
JX10 FORMING TAPS WITH LONG NECK .....................................................................107
JX10 FORMING TAPS WITH LH THREAD.......................................................................109
JX10 FORMING TAPS WITH LONG SHANK ..................................................................112
STI FORMING TAPS.............................................................................................................119
X20 SPIRAL FLUTED TAPS.................................................................................................121
SFT45 SPIRAL FLUTED TAPS .............................................................................................122
SFT SPIRAL FLUTED TAPS WITH FINE THREAD ...........................................................124
SFT SPIRAL FLUTED TAPS WITH LONG SHANK...........................................................125
STI SPIRAL FLUTED TAPS...................................................................................................130
X20 SPIRAL POINTED TAPS ..............................................................................................132
SPIRAL POINTED TAPS.......................................................................................................133
SPIRAL POINTED TAPS WITH FINE THREAD ................................................................135
SPIRAL POINTED TAPS WITH LONG SHANK ...............................................................136

[Link] 96
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:14 K
Lc

X20-NRT

d
K fl Ln Lk
Type:13
L
X20 Forming taps Lc

d
Type:5

K
fl Ln Lk
Lc
2.5P chamfers,for blind hole
L
4P chamfers,for through hole

d
fl Ln Lk
L

◎ High-speed steel material;

◎ Complex coating, excellent wear resistance. CPM M ISO DIN
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2004070P M4×0.7 6HX 4P 13 63 9 12 4.5 3.4 6
X2004070B M4×0.7 6HX 2.5P 14 63 9 12 4.5 3.4 6
X2005080P M5×0.8 6HX 4P 13 70 10 15 6 4.9 8
X2005080B M5×0.8 6HX 2.5P 14 70 10 15 6 4.9 8
X2006100P M6×1 6HX 4P 13 80 10 20 6 4.9 8
X2006100B M6×1 6HX 2.5P 14 80 10 20 6 4.9 8
X2007100P M7×1 6HX 4P 13 80 10 20 7 5.5 8
X2007100B M7×1 6HX 2.5P 14 80 10 20 7 5.5 8
X2008125P M8×1.25 6HX 4P 5 90 13 22 8 6.2 9
X2008125B M8×1.25 6HX 2.5P 5 90 13 22 8 6.2 9
X2008100P M8×1 6HX 4P 5 90 13 22 8 6.2 9
X2008100B M8×1 6HX 2.5P 5 90 13 22 8 6.2 9
X2010150P M10×1.5 6HX 4P 5 100 15 24 10 8 11
X2010150B M10×1.5 6HX 2.5P 5 100 15 24 10 8 11
X2010125P M10×1.25 6HX 4P 5 100 15 24 10 8 11

4 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:14 K
Lc

X20-NRT

d
Type:13 K fl Ln Lk
L
X20 Forming taps Lc

d
fl Ln Lk Type:5

K
2.5P chamfers,for blind hole L
Lc

4P chamfers,for through hole

d
fl Ln Lk
L
◎ High-speed steel material;
◎ Complex coating, excellent wear resistance. CPM M ISO DIN
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2010125B M10×1.25 6HX 2.5P 5 100 15 24 10 8 11
X2010100P M10×1 6HX 4P 5 100 15 24 10 8 11
X2010100B M10×1 6HX 2.5P 5 100 15 24 10 8 11
X2012175P M12×1.75 6HX 4P 5 110 17 32 9 7 10
X2012175B M12×1.75 6HX 2.5P 5 110 17 32 9 7 10
X2012150P M12×1.5 6HX 4P 5 110 17 32 9 7 10
X2012150B M12×1.5 6HX 2.5P 5 110 17 32 9 7 10
X2012125P M12×1.25 6HX 4P 5 110 17 32 9 7 10
X2012125B M12×1.25 6HX 2.5P 5 110 17 32 9 7 10
X2012100P M12×1 6HX 4P 5 110 17 32 9 7 10
X2012100B M12×1 6HX 2.5P 5 110 17 32 9 7 10
X2014200P M14×2 6HX 4P 5 110 20 33 11 9 12
X2014200B M14×2 6HX 2.5P 5 110 20 33 11 9 12
X2014150P M14×1.5 6HX 4P 5 110 20 33 11 9 12
X2014150B M14×1.5 6HX 2.5P 5 110 20 33 11 9 12
X2014125P M14×1.25 6HX 4P 5 110 20 33 11 9 12
X2014125B M14×1.25 6HX 2.5P 5 110 20 33 11 9 12
X2014100P M14×1 6HX 4P 5 110 20 33 11 9 12
X2014100B M14×1 6HX 2.5P 5 110 20 33 11 9 12

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 98
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

X20-NRT Type:5

K
Lc

X20 Forming taps

d
fl Ln Lk
L
2.5P chamfers,for blind hole
4P chamfers,for through hole

◎ High-speed steel material;

◎ Complex coating, excellent wear resistance. CPM M ISO DIN
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2016200P M16×2 6HX 4P 5 110 20 34 12 9 12
X2016200B M16×2 6HX 2.5P 5 110 20 34 12 9 12
X2016150P M16×1.5 6HX 4P 5 110 20 34 12 9 12
X2016150B M16×1.5 6HX 2.5P 5 110 20 34 12 9 12
X2016125P M16×1.25 6HX 4P 5 110 20 34 12 9 12
X2016125B M16×1.25 6HX 2.5P 5 110 20 34 12 9 12
X2016100P M16×1 6HX 4P 5 110 20 34 12 9 12
X2016100B M16×1 6HX 2.5P 5 110 20 34 12 9 12
X2018250P M18×2.5 6HX 4P 5 125 25 36 14 11 14
X2018250B M18×2.5 6HX 2.5P 5 125 25 36 14 11 14
X2018200P M18×2 6HX 4P 5 125 25 36 14 11 14
X2018200B M18×2 6HX 2.5P 5 125 25 36 14 11 14
X2018150P M18×1.5 6HX 4P 5 125 25 36 14 11 14
X2018150B M18×1.5 6HX 2.5P 5 125 25 36 14 11 14
X2020250P M20×2.5 6HX 4P 5 140 25 44 16 12 15
X2020250B M20×2.5 6HX 2.5P 5 140 25 44 16 12 15
X2020200P M20×2 6HX 4P 5 140 25 44 16 12 15
X2020200B M20×2 6HX 2.5P 5 140 25 44 16 12 15
X2020150P M20×1.5 6HX 4P 5 140 25 44 16 12 15
X2020150B M20×1.5 6HX 2.5P 5 140 25 44 16 12 15
X2022250P M22×2.5 6HX 4P 5 140 25 44 18 14.5 17
X2022250B M22×2.5 6HX 2.5P 5 140 25 44 18 14.5 17
X2022200P M22×2 6HX 4P 5 140 25 44 18 14.5 17
X2022200B M22×2 6HX 2.5P 5 140 25 44 18 14.5 17
X2022150P M22×1.5 6HX 4P 5 140 25 44 18 14.5 17
X2022150B M22×1.5 6HX 2.5P 5 140 25 44 18 14.5 17
X2024300P M24×3 6HX 4P 5 160 30 48 18 14.5 17
X2024300B M24×3 6HX 2.5P 5 160 30 48 18 14.5 17
X2024250P M24×2.5 6HX 4P 5 160 30 48 18 14.5 17
X2024250B M24×2.5 6HX 2.5P 5 160 30 48 18 14.5 17
X2024200P M24×2 6HX 4P 5 160 30 48 18 14.5 17
X2024200B M24×2 6HX 2.5P 5 160 30 48 18 14.5 17
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

99 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

X20-NRT Type:5

K
Lc

X20 Forming taps

d
fl Ln Lk
L
2.5P chamfers,for blind hole
4P chamfers,for through hole

◎ High-speed steel material;

◎ Complex coating, excellent wear resistance. CPM M ISO DIN
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
X2027250P M27×2.5 6HX 4P 5 160 30 48 20 16 19
X2027250B M27×2.5 6HX 2.5P 5 160 30 48 20 16 19
X2027200P M27×2 6HX 4P 5 160 30 48 20 16 19
X2027200B M27×2 6HX 2.5P 5 160 30 48 20 16 19
X2030350P M30×3.5 6HX 4P 5 180 35 53 22 18 21
X2030350B M30×3.5 6HX 2.5P 5 180 35 53 22 18 21
X2030300P M30×3 6HX 4P 5 180 35 53 22 18 21
X2030300B M30×3 6HX 2.5P 5 180 35 53 22 18 21
X2030250P M30×2.5 6HX 4P 5 180 35 53 22 18 21
X2030250B M30×2.5 6HX 2.5P 5 180 35 53 22 18 21
X2030200P M30×2 6HX 4P 5 180 35 53 22 18 21
X2030200B M30×2 6HX 2.5P 5 180 35 53 22 18 21
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 100
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-NRT Lc
Type:1
Type:2

K
JX10 Forming taps

d
fl Lk
2P chamfers,for blind hole L L

4P chamfers,for through hole

◎ High-speed steel material;

◎ Complex coating, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN010025P M1×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
NN010025B M1×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
NN012025P M1.2×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
NN012025B M1.2×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
NN014030P M1.4×0.3 RH4 4P 1 37 6.5 - 3 2.5 3 -
NN014030B M1.4×0.3 RH4 2P 2 36 6.5 - 3 2.5 3 -
NN016035P M1.6×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
NN016035B M1.6×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
NN017035P M1.7×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
NN017035B M1.7×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
NN020040P M2×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
NN020040B M2×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
NN023040P M2.3×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
NN023040B M2.3×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
NN025045P M2.5×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
NN025045B M2.5×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
NN026045P M2.6×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
NN026045B M2.6×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
NN030050P M3×0.5 RH7 4P 1 50 16 - 4 3.2 6 -
NN030050B M3×0.5 RH7 2P 2 48 16 - 4 3.2 6 -
NN035060P M3.5×0.6 RH7 4P 1 50 16 - 4 3.2 6 -
NN035060B M3.5×0.6 RH7 2P 2 48 16 - 4 3.2 6 -
NN040070P M4×0.7 RH7 4P 1 57 18 - 5 4 7 -
NN040070B M4×0.7 RH7 2P 2 55 18 - 5 4 7 -
NN050080P M5×0.8 RH7 4P 1 66 20 - 5.5 4.5 7 -
NN050080B M5×0.8 RH7 2P 2 63.5 20 - 5.5 4.5 7 -
NN060100P M6×1 RH7 4P 1 69 27 - 6 4.5 7 2
NN060100B M6×1 RH7 2P 2 66.5 27 - 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

101 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-NRT Type:5

K
Lc

JX10 Forming taps

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN070100P M7×1 RH7 4P 5 70 13 10 6.2 5 8 2
NN070100B M7×1 RH7 2P 5 70 13 10 6.2 5 8 2
NN080125P M8×1.25 RH7 4P 5 70 13 23 6.2 5 8 3
NN080125B M8×1.25 RH7 2P 5 70 13 23 6.2 5 8 3
NN100150P M10×1.5 RH8 4P 5 75 15 28 7 5.5 8 6
NN100150B M10×1.5 RH8 2P 5 75 15 28 7 5.5 8 6
NN120175P M12×1.75 RH9 4P 5 82 17 25 8.5 6.5 9 6
NN120175B M12×1.75 RH9 2P 5 82 17 25 8.5 6.5 9 6
NN140200P M14×2 RH10 4P 5 88 20 31 10.5 8 11 6
NN140200B M14×2 RH10 2P 5 88 20 31 10.5 8 11 6
NN160200P M16×2 RH10 4P 5 95 20 32 12.5 10 13 6
NN160200B M16×2 RH10 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 102
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS
Type:1 Type:5

K
K
Lc
Lc

d
d
JX10-NRT fl
L
Lk fl Ln
L
Lk

JX10 Forming taps Type:2 Type:6

K
K
LC Lc

d
2P chamfers,for blind hole fl Lk Lk
fl
4P chamfers,for through hole L L

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NNU164P NO.1-64UNC RH4 4P 1 37 9 - 3 2.5 3 -
NNU164B NO.1-64UNC RH4 2P 2 35.5 9 - 3 2.5 3 -
NNU256P NO.2-56UNC RH4 4P 1 45 12 - 3 2.5 3 -
NNU256B NO.2-56UNC RH4 2P 2 43.5 12 - 3 2.5 3 -
NNU348P NO.3-48UNC RH4 4P 1 45 15 - 3 2.5 3 -
NNU348B NO.3-48UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
NNU440P NO.4-40UNC RH4 4P 1 45 15 - 3 2.5 3 -
NNU440B NO.4-40UNC RH4 2P 2 43.5 15 - 3 2.5 3 -
NNU540P NO.5-40UNC RH4 4P 1 50 15 - 4 3.2 6 -
NNU540B NO.5-40UNC RH4 2P 2 48 15 - 4 3.2 6 -
NNU632P NO.6-32UNC RH7 4P 1 50 16 - 4 3.2 6 -
NNU632B NO.6-32UNC RH7 2P 2 48 16 - 4 3.2 6 -
NNU832P NO.8-32UNC RH7 4P 1 57 18 - 5 4 7 -
NNU832B NO.8-32UNC RH7 2P 2 54.5 18 - 5 4 7 -
NNU1024P NO.10-24UNC RH7 4P 1 66 20 - 5.5 4.5 7 -
NNU1024B NO.10-24UNC RH7 2P 2 63.5 20 - 5.5 4.5 7 -
NNU1224P NO.12-24UNC RH7 4P 1 66 23 - 5.5 4.5 7 -
NNU1224B NO.12-24UNC RH7 2P 2 63.5 23 - 5.5 4.5 7 -
NNU1420P 1/4-20UNC RH7 4P 6 62 27 - 6 4.5 7 2
NNU1420B 1/4-20UNC RH7 2P 6 62 27 - 6 4.5 7 2
NNU51618P 5/16-18UNC RH8 4P 5 70 15 15 6.1 5 8 3
NNU51618B 5/16-18UNC RH8 2P 5 70 15 15 6.1 5 8 3
NNU3816P 3/8-16UNC RH8 4P 5 75 16 27 7 5.5 8 6
NNU3816B 3/8-16UNC RH8 2P 5 75 16 27 7 5.5 8 6
NNU71614P 7/16-14UNC RH8 4P 5 80 20 20 8 6 9 6
NNU71614B 7/16-14UNC RH8 2P 5 80 20 20 8 6 9 6
NNU1213P 1/2-13UNC RH8 4P 5 85 21 27 9 7 10 6
NNU1213B 1/2-13UNC RH8 2P 5 85 21 27 9 7 10 6
NNU91612P 9/16-12UNC RH9 4P 5 90 21 29 10.5 8 11 6
NNU91612B 9/16-12UNC RH9 2P 5 90 21 29 10.5 8 11 6
NNU5811P 5/8-11UNC RH10 4P 5 95 23 25 12 9 12 6
NNU5811B 5/8-11UNC RH10 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

103 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:1 Type:3
Lc Lc

K
JX10-S-NRT

d
fl Lk
JX10 Forming taps with fine thread L

Type:2 Type:4
Lc
2P chamfers,for blind hole
4P chamfers,for through hole
L L

◎ High-speed steel material;

◎YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN010020P M1×0.2 RH4 4P 1 32 3 - 3 2.5 3 -
NN010020B M1×0.2 RH4 2P 2 31 3 - 3 2.5 3 -
NN012020P M1.2×0.2 RH4 4P 1 32 3 - 3 2.5 3 -
NN012020B M1.2×0.2 RH4 2P 2 31 3 - 3 2.5 3 -
NN014020P M1.4×0.2 RH4 4P 1 37 3 - 3 2.5 3 -
NN014020B M1.4×0.2 RH4 2P 2 36 3 - 3 2.5 3 -
NN016020P M1.6×0.2 RH4 4P 1 37 3 - 3 2.5 3 -
NN016020B M1.6×0.2 RH4 2P 2 36 3 - 3 2.5 3 -
NN020025P M2×0.25 RH4 4P 1 45 4 - 3 2.5 3 -
NN020025B M2×0.25 RH4 2P 2 43.5 4 - 3 2.5 3 -
NN030035P M3×0.35 RH4 4P 3 50 6 8 4 3.2 6 -
NN030035B M3×0.35 RH4 2P 4 48 6 8 4 3.2 6 -
NN040050P M4×0.5 RH7 4P 3 57 8 8 5 4 7 -
NN040050B M4×0.5 RH7 2P 4 55 8 8 5 4 7 -
NN050050P M5×0.5 RH7 4P 3 66 8 8 5.5 4.5 7 -
NN050050B M5×0.5 RH7 2P 4 64 8 8 5.5 4.5 7 -
NN060050P M6×0.5 RH7 4P 3 69 12 12 6 4.5 7 2
NN060050B M6×0.5 RH7 2P 4 66 12 12 6 4.5 7 2
NN060075P M6×0.75 RH7 4P 3 69 12 12 6 4.5 7 2
NN060075B M6×0.75 RH7 2P 4 66 12 12 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 104
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-S-NRT Type:5

K
Lc

JX10 Forming taps with fine thread

d
fl Ln Lk
2P chamfers,for blind hole
L
4P chamfers,for through hole
◎ High-speed steel material;
◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN080100P M8×1 RH7 4P 5 70 13 23 6.2 5 8 3
NN080100B M8×1 RH7 2P 5 70 13 23 6.2 5 8 3
NN080075P M8×0.75 RH7 4P 5 70 13 23 6.2 5 8 3
NN080075B M8×0.75 RH7 2P 5 70 13 23 6.2 5 8 3
NN100125P M10×1.25 RH7 4P 5 75 13 30 7 5.5 8 6
NN100125B M10×1.25 RH7 2P 5 75 13 30 7 5.5 8 6
NN100100P M10×1 RH7 4P 5 75 13 30 7 5.5 8 6
NN100100B M10×1 RH7 2P 5 75 13 30 7 5.5 8 6
NN100075P M10×0.75 RH7 4P 5 75 13 30 7 5.5 8 6
NN100075B M10×0.75 RH7 2P 5 75 13 30 7 5.5 8 6
NN120150P M12×1.5 RH8 4P 5 82 17 25 8.5 6.5 9 6
NN120150B M12×1.5 RH8 2P 5 82 17 25 8.5 6.5 9 6
NN120125P M12×1.25 RH7 4P 5 82 13 29 8.5 6.5 9 6
NN120125B M12×1.25 RH7 2P 5 82 13 29 8.5 6.5 9 6
NN120100P M12×1 RH7 4P 5 82 13 29 8.5 6.5 9 6
NN120100B M12×1 RH7 2P 5 82 13 29 8.5 6.5 9 6
NN140150P M14×1.5 RH8 4P 5 88 20 31 10.5 8 11 6
NN140150B M14×1.5 RH8 2P 5 88 20 31 10.5 8 11 6
NN140125P M14×1.25 RH7 4P 5 88 20 31 10.5 8 11 6
NN140125B M14×1.25 RH7 2P 5 88 20 31 10.5 8 11 6
NN140100P M14×1 RH7 4P 5 88 20 31 10.5 8 11 6
NN140100B M14×1 RH7 2P 5 88 20 31 10.5 8 11 6
NN160150P M16×1.5 RH8 4P 5 95 20 32 12.5 10 13 6
NN160150B M16×1.5 RH8 2P 5 95 20 32 12.5 10 13 6
NN160125P M16×1.25 RH7 4P 5 95 20 32 12.5 10 13 6
NN160125B M16×1.25 RH7 2P 5 95 20 32 12.5 10 13 6
NN160100P M16×1 RH7 4P 5 95 20 32 12.5 10 13 6
NN160100B M16×1 RH7 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

105 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:1 Type:5

K
K
Lc

JX10-S-NRT
Lc

d
d
fl Lk fl Ln Lk

JX10 Forming taps with fine thread L L

Type:6
Type:2

K
K
LC Lc
2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk Lk
fl
L L

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NNU080P NO.0-80UNF RH4 4P 1 37 6.5 - 3 2.5 3 -
NNU080B NO.0-80UNF RH4 2P 2 35.5 6.5 - 3 2.5 3 -
NNU172P NO.1-72UNF RH4 4P 1 37 9 - 3 2.5 3 -
NNU172B NO.1-72UNF RH4 2P 2 35.5 9 - 3 2.5 3 -
NNU1032P NO.10-32UNF RH7 4P 1 66 20 - 5.5 4.5 7 -
NNU1032B NO.10-32UNF RH7 2P 2 63.5 20 - 5.5 4.5 7 -
NNU1228P NO.12-28UNF RH7 4P 1 66 23 - 5.5 4.5 7 -
NNU1228B NO.12-28UNF RH7 2P 2 63.5 23 - 5.5 4.5 7 -
NNU1428P 1/4-28UNF RH7 4P 6 62 27 - 6 4.5 7 2
NNU1428B 1/4-28UNF RH7 2P 6 62 27 - 6 4.5 7 2
NNU51624P 5/16-24UNF RH7 4P 5 70 11 19 6.1 5 8 3
NNU51624B 5/16-24UNF RH7 2P 5 70 11 19 6.1 5 8 3
NNU3824P 3/8-24UNF RH7 4P 5 75 11 32 7 5.5 8 6
NNU3824B 3/8-24UNF RH7 2P 5 75 11 32 7 5.5 8 6
NNU71620P 7/16-20UNF RH7 4P 5 80 13 27 8 6 9 6
NNU71620B 7/16-20UNF RH7 2P 5 80 13 27 8 6 9 6
NNU1220P 1/2-20UNF RH7 4P 5 85 13 35 9 7 10 6
NNU1220B 1/2-20UNF RH7 2P 5 85 13 35 9 7 10 6
NNU91618P 9/16-18UNF RH8 4P 5 90 15 35 10.5 8 11 6
NNU91618B 9/16-18UNF RH8 2P 5 90 15 35 10.5 8 11 6
NNU5818P 5/8-18UNF RH8 4P 5 95 23 25 12 9 12 6
NNU5818B 5/8-18UNF RH8 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 106
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

JX10-BK-NRT
JX10 Forming taps with long neck Type:4
Lc

2P chamfers,for blind hole

4P chamfers,for through hole
L

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NBK0204P M2×0.4 RH5 4P 3 45 7 6 3 2.5 3 -
NBK0204B M2×0.4 RH5 2P 4 43.5 7 6 3 2.5 3 -
NBK025045P M2.5×0.45 RH5 4P 3 45 8 7 3 2.5 3 -
NBK025045B M2.5×0.45 RH5 2P 4 43.5 8 7 3 2.5 3 -
NBK0305P M3×0.5 RH7 4P 3 50 10 8 4 3.2 6 -
NBK0305B M3×0.5 RH7 2P 4 48 10 8 4 3.2 6 -
NBK03506P M3.5×0.6 RH7 4P 3 50 10 8 4 3.2 6 -
NBK03506B M3.5×0.6 RH7 2P 4 48 10 8 4 3.2 6 -
NBK0407P M4×0.7 RH7 4P 3 57 11 9 5 4 7 -
NBK0407B M4×0.7 RH7 2P 4 55 11 9 5 4 7 -
NBK045075P M4.5×0.75 RH7 4P 3 57 11 9 5 4 7 -
NBK045075B M4.5×0.75 RH7 2P 4 55 11 9 5 4 7 -
NBK0508P M5×0.8 RH7 4P 3 66 12 10 5.5 4.5 7 -
NBK0508B M5×0.8 RH7 2P 4 63.5 12 10 5.5 4.5 7 -
NBK0610P M6×1 RH7 4P 3 69 12 12 6 4.5 7 2
NBK0610B M6×1 RH7 2P 4 66 12 12 6 4.5 7 2
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

107 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

JX10-BK-NRT
JX10 Forming taps with long neck Type:4
Lc
2P chamfers,for blind hole
4P chamfers,for through hole
L
◎ High-speed steel material;
◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NUBK440P NO.4-40UNC RH4 4P 3 45 9 7 3 2.5 3 -
NUBK440B NO.4-40UNC RH4 2P 4 43.5 9 7 3 2.5 3 -
NUBK540P NO.5-40UNC RH4 4P 3 50 10 8 4 3.2 6 -
NUBK540B NO.5-40UNC RH4 2P 4 48 10 8 4 3.2 6 -
NUBK632P NO.6-32UNC RH7 4P 3 50 10 8 4 3.2 6 -
NUBK632B NO.6-32UNC RH7 2P 4 48 10 8 4 3.2 6 -
NUBK832P NO.8-32UNC RH7 4P 3 57 11 9 5 4 7 -
NUBK832B NO.8-32UNC RH7 2P 4 55 11 9 5 4 7 -
NUBK1024P NO.10-24UNC RH7 4P 3 66 12 10 5.5 4.5 7 -
NUBK1024B NO.10-24UNC RH7 2P 4 63.5 12 10 5.5 4.5 7 -
NUBK1224P NO.12-24UNC RH7 4P 3 66 12 12 5.5 4.5 7 -
NUBK1224B NO.12-24UNC RH7 2P 4 63.5 12 12 5.5 4.5 7 -
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 108
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:1

K
Lc

JX10-LH-NRT

d
fl Lk
L
JX10 Forming tap with LH thread Type:2

K
LC
2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk
L
◎ High-speed steel material;
◎ YC-C50 multilayer coating, no easy to stick chips. Left-hand thread,
suitable for left-hand threading
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NLH01025P M1×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
NLH01025B M1×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
NLH012025P M1.2×0.25 RH4 4P 1 32 4.5 - 3 2.5 3 -
NLH012025B M1.2×0.25 RH4 2P 2 31 3.5 - 3 2.5 3 -
NLH014030P M1.4×0.3 RH4 4P 1 37 6.5 - 3 2.5 3 -
NLH014030B M1.4×0.3 RH4 2P 2 36 6.5 - 3 2.5 3 -
NLH016035P M1.6×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
NLH016035B M1.6×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
NLH017035P M1.7×0.35 RH4 4P 1 37 8 - 3 2.5 3 -
NLH017035B M1.7×0.35 RH4 2P 2 35.5 8 - 3 2.5 3 -
NLH02040P M2×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
NLH02040B M2×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
NLH02304P M2.3×0.4 RH5 4P 1 45 10 - 3 2.5 3 -
NLH02304B M2.3×0.4 RH5 2P 2 43.5 10 - 3 2.5 3 -
NLH025045P M2.5×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
NLH025045B M2.5×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
NLH026045P M2.6×0.45 RH5 4P 1 45 13 - 3 2.5 3 -
NLH026045B M2.6×0.45 RH5 2P 2 43.5 13 - 3 2.5 3 -
NLH03050P M3×0.5 RH7 4P 1 50 16 - 4 3.2 6 -
NLH03050B M3×0.5 RH7 2P 2 48 16 - 4 3.2 6 -
NLH03506P M3.5×0.6 RH7 4P 1 50 16 - 4 3.2 6 -
NLH03506B M3.5×0.6 RH7 2P 2 48 16 - 4 3.2 6 -
NLH04070P M4×0.7 RH7 4P 1 57 18 - 5 4 7 -
NLH04070B M4×0.7 RH7 2P 2 55 18 - 5 4 7 -
NLH05080P M5×0.8 RH7 4P 1 66 20 - 5.5 4.5 7 -
NLH05080B M5×0.8 RH7 2P 2 63.5 20 - 5.5 4.5 7 -
NLH06100P M6×1 RH7 4P 1 69 27 - 6 4.5 7 2
NLH06100B M6×1 RH7 2P 2 66.5 27 - 6 4.5 7 2
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

109 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-LH-NRT Type:5

K
Lc

JX10 Forming tap with LH thread

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-C50 multilayer coating, no easy to stick chips. Left-hand thread,
suitable for left-hand threading
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NLH07100P M7×1 RH7 4P 5 70 13 10 6.2 5 8 2
NLH07100B M7×1 RH7 2P 5 70 13 10 6.2 5 8 2
NLH08125P M8×1.25 RH7 4P 5 70 13 23 6.2 5 8 3
NLH08125B M8×1.25 RH7 2P 5 70 13 23 6.2 5 8 3
NLH10150P M10×1.5 RH8 4P 5 75 15 28 7 5.5 8 6
NLH10150B M10×1.5 RH8 2P 5 75 15 28 7 5.5 8 6
NLH12175P M12×1.75 RH9 4P 5 82 17 25 8.5 6.5 9 6
NLH12175B M12×1.75 RH9 2P 5 82 17 25 8.5 6.5 9 6
NLH14200P M14×2 RH10 4P 5 88 20 31 10.5 8 11 6
NLH14200B M14×2 RH10 2P 5 88 20 31 10.5 8 11 6
NLH16200P M16×2 RH10 4P 5 95 20 32 12.5 10 13 6
NLH16200B M16×2 RH10 2P 5 95 20 32 12.5 10 13 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 110
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:1

K
Type:5

K
Lc Lc

JX10-LH-NRT

d
fl Lk fl Ln Lk
L L

JX10 Forming tap with LH thread Type:2 Type:6 K

K
Lc
LC

d
2P chamfers,for blind hole fl Lk fl Lk

4P chamfers,for through hole L L

◎ High-speed steel material;

◎ YC-C50 multilayer coating, no easy to stick chips. Left-hand thread,
suitable for left-hand threading
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NULH164P NULH164P RH4 4P 1 37 9 - 3 2.5 3 -
NULH164B NULH164B RH4 2P 2 35.5 9 - 3 2.5 3 -
NULH256P NULH256P RH4 4P 1 45 12 - 3 2.5 3 -
NULH256B NULH256B RH4 2P 2 43.5 12 - 3 2.5 3 -
NULH348P NULH348P RH4 4P 1 45 15 - 3 2.5 3 -
NULH348B NULH348B RH4 2P 2 43.5 15 - 3 2.5 3 -
NULH440P NULH440P RH4 4P 1 45 15 - 3 2.5 3 -
NULH440B NULH440B RH4 2P 2 43.5 15 - 3 2.5 3 -
NULH540P NULH540P RH4 4P 1 50 15 - 4 3.2 6 -
NULH540B NULH540B RH4 2P 2 48 15 - 4 3.2 6 -
NULH632P NULH632P RH7 4P 1 50 16 - 4 3.2 6 -
NULH632B NULH632B RH7 2P 2 48 16 - 4 3.2 6 -
NULH832P NULH832P RH7 4P 1 57 18 - 5 4 7 -
NULH832B NULH832B RH7 2P 2 54.5 18 - 5 4 7 -
NULH1024P NULH1024P RH7 4P 1 66 20 - 5.5 4.5 7 -
NULH1024B NULH1024B RH7 2P 2 63.5 20 - 5.5 4.5 7 -
NULH1224P NULH1224P RH7 4P 1 66 23 - 5.5 4.5 7 -
NULH1224B NULH1224B RH7 2P 2 63.5 23 - 5.5 4.5 7 -
NULH1420P NULH1420P RH7 4P 6 62 27 - 6 4.5 7 2
NULH1420B NULH1420B RH7 2P 6 62 27 - 6 4.5 7 2
NULH51618P NULH51618P RH8 4P 5 70 15 15 6.1 5 8 3
NULH51618B NULH51618B RH8 2P 5 70 15 15 6.1 5 8 3
NULH3816P NULH3816P RH8 4P 5 75 16 27 7 5.5 8 6
NULH3816B NULH3816B RH8 2P 5 75 16 27 7 5.5 8 6
NULH71614P NULH71614P RH8 4P 5 80 20 20 8 6 9 6
NULH71614B NULH71614B RH8 2P 5 80 20 20 8 6 9 6
NULH1213P NULH1213P RH8 4P 5 85 21 27 9 7 10 6
NULH1213B NULH1213B RH8 2P 5 85 21 27 9 7 10 6
NULH91612P NULH91612P RH9 4P 5 90 21 29 10.5 8 11 6
NULH91612B NULH91612B RH9 2P 5 90 21 29 10.5 8 11 6
NULH5811P NULH5811P RH10 4P 5 95 23 25 12 9 12 6
NULH5811B NULH5811B RH10 2P 5 95 23 25 12 9 12 6
Tolerances under 2B [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

111 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:7

JX10-L-NRT
JX10 Forming taps with long shank
Type:8

2P chamfers,for blind hole

4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN020480P M2×0.4 RH5 4P 7 80 7 6 3 2.5 5 -
NN020480B M2×0.4 RH5 2P 8 78 7 6 3 2.5 5 -
NN0204100P M2×0.4 RH5 4P 7 100 7 6 3 2.5 5 -
NN0204100B M2×0.4 RH5 2P 8 98 7 6 3 2.5 5 -
NN0204120P M2×0.4 RH5 4P 7 120 7 6 3 2.5 5 -
NN0204120B M2×0.4 RH5 2P 8 118 7 6 3 2.5 5 -
NN02504580P M2.5×0.45 RH5 4P 7 80 8 7 3 2.5 5 -
NN02504580B M2.5×0.45 RH5 2P 8 78 8 7 3 2.5 5 -
NN025045100P M2.5×0.45 RH5 4P 7 100 8 7 3 2.5 5 -
NN025045100B M2.5×0.45 RH5 2P 8 98 8 7 3 2.5 5 -
NN025045120P M2.5×0.45 RH5 4P 7 120 8 7 3 2.5 5 -
NN025045120B M2.5×0.45 RH5 2P 8 118 8 7 3 2.5 5 -
NN030580P M3×0.5 RH7 4P 7 80 10 8 4 3.2 6 -
NN030580B M3×0.5 RH7 2P 8 78 10 8 4 3.2 6 -
NN0305100P M3×0.5 RH7 4P 7 100 10 8 4 3.2 6 -
NN0305100B M3×0.5 RH7 2P 8 98 10 8 4 3.2 6 -
NN0305120P M3×0.5 RH7 4P 7 120 10 8 4 3.2 6 -
NN0305120B M3×0.5 RH7 2P 8 118 10 8 4 3.2 6 -
NN0305150P M3×0.5 RH7 4P 7 150 10 8 4 3.2 6 -
NN0305150B M3×0.5 RH7 2P 8 148 10 8 4 3.2 6 -
NN0350680P M3.5×0.6 RH7 4P 7 80 10 8 4 3.2 6 -
NN0350680B M3.5×0.6 RH7 2P 8 78 10 8 4 3.2 6 -
NN03506100P M3.5×0.6 RH7 4P 7 100 10 8 4 3.2 6 -
NN03506100B M3.5×0.6 RH7 2P 8 98 10 8 4 3.2 6 -
NN03506120P M3.5×0.6 RH7 4P 7 120 10 8 4 3.2 6 -
NN03506120B M3.5×0.6 RH7 2P 8 118 10 8 4 3.2 6 -
NN03506150P M3.5×0.6 RH7 4P 7 150 10 8 4 3.2 6 -
NN03506150B M3.5×0.6 RH7 2P 8 148 10 8 4 3.2 6 -
NN040780P M4×0.7 RH7 4P 7 80 11 9 5 4 7 -
NN040780B M4×0.7 RH7 2P 8 78 11 9 5 4 7 -
NN0407100P M4×0.7 RH7 4P 7 100 11 9 5 4 7 -
NN0407100B M4×0.7 RH7 2P 8 98 11 9 5 4 7 -
NN0407120P M4×0.7 RH7 4P 7 120 11 9 5 4 7 -
NN0407120B M4×0.7 RH7 2P 8 118 11 9 5 4 7 -

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 112
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-L-NRT Type:7

JX10 Forming taps with long shank Type:5

K
Lc

d
Type:8

2P chamfers,for blind hole fl Ln

L
Lk

4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN0407150P M4×0.7 RH7 4P 7 150 11 9 5 4 7 -
NN0407150B M4×0.7 RH7 2P 8 148 11 9 5 4 7 -
NN04507580P M4.5×0.75 RH7 4P 7 80 11 9 5 4 7 -
NN04507580B M4.5×0.75 RH7 2P 8 78 11 9 5 4 7 -
NN045075100P M4.5×0.75 RH7 4P 7 100 11 9 5 4 7 -
NN045075100B M4.5×0.75 RH7 2P 8 98 11 9 5 4 7 -
NN045075120P M4.5×0.75 RH7 4P 7 120 11 9 5 4 7 -
NN045075120B M4.5×0.75 RH7 2P 8 118 11 9 5 4 7 -
NN045075150P M4.5×0.75 RH7 4P 7 150 11 9 5 4 7 -
NN045075150B M4.5×0.75 RH7 2P 8 148 11 9 5 4 7 -
NN050880P M5×0.8 RH7 4P 7 80 12 10 5.5 4.5 7 -
NN050880B M5×0.8 RH7 2P 8 78 12 10 5.5 4.5 7 -
NN0508100P M5×0.8 RH7 4P 7 100 12 10 5.5 4.5 7 -
NN0508100B M5×0.8 RH7 2P 8 98 12 10 5.5 4.5 7 -
NN0508120P M5×0.8 RH7 4P 7 120 12 10 5.5 4.5 7 -
NN0508120B M5×0.8 RH7 2P 8 118 12 10 5.5 4.5 7 -
NN0508150P M5×0.8 RH7 4P 7 150 12 10 5.5 4.5 7 -
NN0508150B M5×0.8 RH7 2P 8 148 12 10 5.5 4.5 7 -
NN061080P M6×1 RH7 4P 7 80 12 12 6 4.5 7 2
NN061080B M6×1 RH7 2P 8 78 12 12 6 4.5 7 2
NN0610100P M6×1 RH7 4P 7 100 12 12 6 4.5 7 2
NN0610100B M6×1 RH7 2P 8 98 12 12 6 4.5 7 2
NN0610120P M6×1 RH7 4P 7 120 12 12 6 4.5 7 2
NN0610120B M6×1 RH7 2P 8 118 12 12 6 4.5 7 2
NN0610150P M6×1 RH7 4P 7 150 12 12 6 4.5 7 2
NN0610150B M6×1 RH7 2P 8 148 12 12 6 4.5 7 2
NN0710100B M7×1 RH7 2P 5 100 13 10 6.2 5 8 2
NN0710120B M7×1 RH7 2P 5 120 13 10 6.2 5 8 2
NN0710150B M7×1 RH7 2P 5 150 13 10 6.2 5 8 2
NN08125100B M8×1.25 RH7 2P 5 100 13 23 6.2 5 8 3
NN08125120B M8×1.25 RH7 2P 5 120 13 23 6.2 5 8 3
NN08125150B M8×1.25 RH7 2P 5 150 13 23 6.2 5 8 3
NN0810100B M8×1 RH7 2P 5 100 13 23 6.2 5 8 3
NN0810120B M8×1 RH7 2P 5 120 13 23 6.2 5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

113 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-L-NRT Type:5

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk
2P chamfers,for blind hole
L
4P chamfers,for through hole
◎ High-speed steel material;
◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN0810150B M8×1 RH7 2P 5 150 13 23 6.2 5 8 3
NN1015100B M10×1.5 RH8 2P 5 100 15 28 7 5.5 8 6
NN1015120B M10×1.5 RH8 2P 5 120 15 28 7 5.5 8 6
NN1015150B M10×1.5 RH8 2P 5 150 15 28 7 5.5 8 6
NN10125100B M10×1.25 RH7 2P 5 100 13 30 7 5.5 8 6
NN10125120B M10×1.25 RH7 2P 5 120 13 30 7 5.5 8 6
NN10125150B M10×1.25 RH7 2P 5 150 13 30 7 5.5 8 6
NN1010100B M10×1 RH7 2P 5 100 13 30 7 5.5 8 6
NN1010120B M10×1 RH7 2P 5 120 13 30 7 5.5 8 6
NN1010150B M10×1 RH7 2P 5 150 13 30 7 5.5 8 6
NN12175100B M12×1.75 RH9 2P 5 100 17 25 8.5 6.5 9 6
NN12175120B M12×1.75 RH9 2P 5 120 17 25 8.5 6.5 9 6
NN12175150B M12×1.75 RH9 2P 5 150 17 25 8.5 6.5 9 6
NN1215100B M12×1.5 RH8 2P 5 100 17 25 8.5 6.5 9 6
NN1215120B M12×1.5 RH8 2P 5 120 17 25 8.5 6.5 9 6
NN1215150B M12×1.5 RH8 2P 5 150 17 25 8.5 6.5 9 6
NN12125100B M12×1.25 RH7 2P 5 100 13 29 8.5 6.5 9 6
NN12125120B M12×1.25 RH7 2P 5 120 13 29 8.5 6.5 9 6
NN12125150B M12×1.25 RH7 2P 5 150 13 29 8.5 6.5 9 6
NN1210100B M12×1 RH7 2P 5 100 13 29 8.5 6.5 9 6
NN1210120B M12×1 RH7 2P 5 120 13 29 8.5 6.5 9 6
NN1210150B M12×1 RH7 2P 5 150 13 29 8.5 6.5 9 6
NN1420120B M14×2 RH10 2P 5 120 20 31 10.5 8 11 6
NN1420150B M14×2 RH10 2P 5 150 20 31 10.5 8 11 6
NN1415120B M14×1.5 RH8 2P 5 120 20 31 10.5 8 11 6
NN1415150B M14×1.5 RH8 2P 5 150 20 31 10.5 8 11 6
NN14125120B M14×1.25 RH7 2P 5 120 20 31 10.5 8 11 6
NN14125150B M14×1.25 RH7 2P 5 150 20 31 10.5 8 11 6
NN1410120B M14×1 RH7 2P 5 120 20 31 10.5 8 11 6
NN1410150B M14×1 RH7 2P 5 150 20 31 10.5 8 11 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 114
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5
JX10-L-NRT

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NN1620120B M16×2 RH10 2P 5 120 20 32 12.5 10 13 6
NN1620150B M16×2 RH10 2P 5 150 20 32 12.5 10 13 6
NN1615120B M16×1.5 RH8 2P 5 120 20 32 12.5 10 13 6
NN1615150B M16×1.5 RH8 2P 5 150 20 32 12.5 10 13 6
NN16125120B M16×1.25 RH7 2P 5 120 20 32 12.5 10 13 6
NN16125150B M16×1.25 RH7 2P 5 150 20 32 12.5 10 13 6
NN1610120B M16×1 RH7 2P 5 120 20 32 12.5 10 13 6
NN1610150B M16×1 RH7 2P 5 150 20 32 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

115 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:7

JX10-L-NRT
JX10 Forming taps with long shank
Type:8
2P chamfers,for blind hole
4P chamfers,for through hole
◎ High-speed steel material;
◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NNU44080P NO.4-40UNC RH4 4P 7 80 9 7 3 2.5 5 -
NNU44080B NO.4-40UNC RH4 2P 8 78 9 7 3 2.5 5 -
NNU440100P NO.4-40UNC RH4 4P 7 100 9 7 3 2.5 5 -
NNU440100B NO.4-40UNC RH4 2P 8 98 9 7 3 2.5 5 -
NNU440120P NO.4-40UNC RH4 4P 7 120 9 7 3 2.5 5 -
NNU440120B NO.4-40UNC RH4 2P 8 118 9 7 3 2.5 5 -
NNU54080P NO.5-40UNC RH4 4P 7 80 10 8 4 3.2 6 -
NNU54080B NO.5-40UNC RH4 2P 8 78 10 8 4 3.2 6 -
NNU540100P NO.5-40UNC RH4 4P 7 100 10 8 4 3.2 6 -
NNU540100B NO.5-40UNC RH4 2P 8 98 10 8 4 3.2 6 -
NNU540120P NO.5-40UNC RH4 4P 7 120 10 8 4 3.2 6 -
NNU540120B NO.5-40UNC RH4 2P 8 118 10 8 4 3.2 6 -
NNU63280P NO.6-32UNC RH7 4P 7 80 10 8 4 3.2 6 -
NNU63280B NO.6-32UNC RH7 2P 8 78 10 8 4 3.2 6 -
NNU632100P NO.6-32UNC RH7 4P 7 100 10 8 4 3.2 6 -
NNU632100B NO.6-32UNC RH7 2P 8 98 10 8 4 3.2 6 -
NNU632120P NO.6-32UNC RH7 4P 7 120 10 8 4 3.2 6 -
NNU632120B NO.6-32UNC RH7 2P 8 118 10 8 4 3.2 6 -
NNU632150P NO.6-32UNC RH7 4P 7 150 10 8 4 3.2 6 -
NNU632150B NO.6-32UNC RH7 2P 8 148 10 8 4 3.2 6 -
NNU83280P NO.8-32UNC RH7 4P 7 80 11 9 5 4 7 -
NNU83280B NO.8-32UNC RH7 2P 8 78 11 9 5 4 7 -
NNU832100P NO.8-32UNC RH7 4P 7 100 11 9 5 4 7 -
NNU832100B NO.8-32UNC RH7 2P 8 98 11 9 5 4 7 -
NNU832120P NO.8-32UNC RH7 4P 7 120 11 9 5 4 7 -
NNU832120B NO.8-32UNC RH7 2P 8 118 11 9 5 4 7 -
NNU832150P NO.8-32UNC RH7 4P 7 150 11 9 5 4 7 -
NNU832150B NO.8-32UNC RH7 2P 8 148 11 9 5 4 7 -
NNU102480P NO.10-24UNC RH7 4P 7 80 12 10 5.5 4.5 7 -
NNU102480B NO.10-24UNC RH7 2P 8 78 12 10 5.5 4.5 7 -
NNU1024100P NO.10-24UNC RH7 4P 7 100 12 10 5.5 4.5 7 -
NNU1024100B NO.10-24UNC RH7 2P 8 98 12 10 5.5 4.5 7 -
NNU1024120P NO.10-24UNC RH7 4P 7 120 12 10 5.5 4.5 7 -
NNU1024120B NO.10-24UNC RH7 2P 8 118 12 10 5.5 4.5 7 -

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 116
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-L-NRT Type:5
Type:7

K
JX10 Forming taps with long shank Lc

Type:8

d
fl Ln Lk
2P chamfers,for blind hole L

4P chamfers,for through hole

◎ High-speed steel material;
◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NNU1024150P NO.10-24UNC RH7 4P 7 150 12 10 5.5 4.5 7 -
NNU1024150B NO.10-24UNC RH7 2P 8 148 12 10 5.5 4.5 7 -
NNU122480P NO.12-24UNC RH7 4P 7 80 12 12 5.5 4.5 7 -
NNU122480B NO.12-24UNC RH7 2P 8 78 12 12 5.5 4.5 7 -
NNU1224100P NO.12-24UNC RH7 4P 7 100 12 12 5.5 4.5 7 -
NNU1224100B NO.12-24UNC RH7 2P 8 98 12 12 5.5 4.5 7 -
NNU1224120P NO.12-24UNC RH7 4P 7 120 12 12 5.5 4.5 7 -
NNU1224120B NO.12-24UNC RH7 2P 8 118 12 12 5.5 4.5 7 -
NNU1224150P NO.12-24UNC RH7 4P 7 150 12 12 5.5 4.5 7 -
NNU1224150B NO.12-24UNC RH7 2P 8 148 12 12 5.5 4.5 7 -
NNU1420100B 1/4-20UNC RH7 2P 5 100 12 12 6 4.5 7 2
NNU1420120B 1/4-20UNC RH7 2P 5 120 12 12 6 4.5 7 2
NNU1420150B 1/4-20UNC RH7 2P 5 150 12 12 6 4.5 7 2
NNU1428100B 1/4-28UNF RH7 2P 5 100 12 12 6 4.5 7 2
NNU1428120B 1/4-28UNF RH7 2P 5 120 12 12 6 4.5 7 2
NNU1428150B 1/4-28UNF RH7 2P 5 150 12 12 6 4.5 7 2
NNU51618100B 5/16-18UNC RH8 2P 5 100 15 15 6.1 5 8 3
NNU51618120B 5/16-18UNC RH8 2P 5 120 15 15 6.1 5 8 3
NNU51618150B 5/16-18UNC RH8 2P 5 150 15 15 6.1 5 8 3
NNU51624100B 5/16-24UNF RH7 2P 5 100 11 19 6.1 5 8 3
NNU51624120B 5/16-24UNF RH7 2P 5 120 11 19 6.1 5 8 3
NNU51624150B 5/16-24UNF RH7 2P 5 150 11 19 6.1 5 8 3
NNU3816100B 3/8-16UNC RH8 2P 5 100 16 27 7 5.5 8 6
NNU3816120B 3/8-16UNC RH8 2P 5 120 16 27 7 5.5 8 6
NNU3816150B 3/8-16UNC RH8 2P 5 150 16 27 7 5.5 8 6
NNU3824100B 3/8-24UNF RH7 2P 5 100 11 32 7 5.5 8 6
NNU3824120B 3/8-24UNF RH7 2P 5 120 11 32 7 5.5 8 6
NNU3824150B 3/8-24UNF RH7 2P 5 150 11 32 7 5.5 8 6
NNU71614100B 7/16-14UNC RH8 2P 5 100 20 20 8 6 9 6
NNU71614120B 7/16-14UNC RH8 2P 5 120 20 20 8 6 9 6
NNU71614150B 7/16-14UNC RH8 2P 5 150 20 20 8 6 9 6
NNU71620100B 7/16-20UNF RH7 2P 5 100 13 27 8 6 9 6
NNU71620120B 7/16-20UNF RH7 2P 5 120 13 27 8 6 9 6
NNU71620150B 7/16-20UNF RH7 2P 5 150 13 27 8 6 9 6
NNU1213100B 1/2-13UNC RH8 2P 5 100 21 27 9 7 10 6

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

117 NINGBO NICHE TOOLS CO. LTD

 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

JX10-L-NRT Type:5

K
Lc

JX10 Forming taps with long shank

d
fl Ln Lk
2P chamfers,for blind hole
L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NNU1213120B 1/2-13UNC RH8 2P 5 120 21 27 9 7 10 6
NNU1213150B 1/2-13UNC RH8 2P 5 150 21 27 9 7 10 6
NNU1220100B 1/2-20UNF RH7 2P 5 100 13 35 9 7 10 6
NNU1220120B 1/2-20UNF RH7 2P 5 120 13 35 9 7 10 6
NNU1220150B 1/2-20UNF RH7 2P 5 150 13 35 9 7 10 6
NNU91612120B 9/16-12UNC RH9 2P 5 120 21 29 10.5 8 11 6
NNU91612150B 9/16-12UNC RH9 2P 5 150 21 29 10.5 8 11 6
NNU91618120B 9/16-18UNF RH8 2P 5 120 15 35 10.5 8 11 6
NNU91618150B 9/16-18UNF RH8 2P 5 150 15 35 10.5 8 11 6
NNU5811120B 5/8-11UNC RH10 2P 5 120 23 25 12 9 12 6
NNU5811150B 5/8-11UNC RH10 2P 5 150 23 25 12 9 12 6
NNU5818120B 5/8-18UNF RH8 2P 5 120 23 25 12 9 12 6
NNU5818150B 5/8-18UNF RH8 2P 5 150 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 118
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:4

ST-NRT Type:2

ST Forming taps Type:5

K
Lc

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NST02040B ST2×0.4 RH3 2P 2 43.5 13 - 3 2.5 3 -
NST025045B ST2.5×0.45 RH3 2P 2 48 15 - 4 3.2 6 -
NST03050B ST3×0.5 RH4 2P 2 48 16 - 4 3.2 6 -
NST04070B ST4×0.7 RH4 2P 4 63.5 12 10 5.5 4.5 7 -
NST05080B ST5×0.8 RH4 2P 4 63.5 12 12 6 4.5 7 2
NST06100B ST6×1 RH5 2P 5 70 15 22 6.2 5 8 3
NST08100B ST8×1 RH5 2P 5 75 14 29 7 5.5 8 6
NST08125B ST8×1.25 RH5 2P 5 75 13 30 7 5.5 8 6
NST10100B ST10×1 RH5 2P 5 82 14 28 8.5 6.5 9 6
NST10125B ST10×1.25 RH5 2P 5 82 13 29 8.5 6.5 9 6
NST10150B ST10×1.5 RH5 2P 5 82 17 25 8.5 6.5 9 6
NST12100B ST12×1 RH5 2P 5 88 21 30 10.5 8 11 6
NST12125B ST12×1.25 RH5 2P 5 88 20 31 10.5 8 11 6
NST12150B ST12×1.5 RH5 2P 5 88 20 31 10.5 8 11 6
NST12175B ST12×1.75 RH6 2P 5 88 20 31 10.5 8 11 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

119 NINGBO NICHE TOOLS CO. LTD

 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:4

ST-NRT
Type:2
ST Forming taps
Type:5

K
Lc

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, excellent wear resistance, no easy to stick chips.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NUST256B STNO.2-56UNC RH3 2P 2 43.5 13 - 3 2.5 3 -
NUST440B STNO.4-40UNC RH3 2P 2 48 15 - 4 3.2 6 -
NUST632B STNO.6-32UNC RH4 2P 2 55 18 - 5 4 7 -
NUST832B STNO.8-32UNC RH4 2P 2 63.5 18 - 5.5 4.5 7 -
NUST1032B STNO.10-32UNF RH4 2P 4 66 12 12 6 4.5 7 2
NUST1024B STNO.10-24UNC RH4 2P 4 66 12 12 6 4.5 7 2
NUST1224B STNO.12-24UNC RH4 2P 5 70 13 10 6.2 5 8 2
NUST1420B ST1/4-20UNC RH5 2P 5 70 15 15 6.1 5 8 3
NUST1428B ST1/4-28UNF RH5 2P 5 70 15 15 6.1 5 8 3
NUST51618B ST5/16-18UNC RH5 2P 5 75 15 28 7 5.5 8 6
NUST51624B ST5/16-24UNF RH5 2P 5 75 16 27 7 5.5 8 6
NUST3816B ST3/8-16UNC RH5 2P 5 82 17 25 8.5 6.5 9 6
NUST3824B ST3/8-24UNF RH5 2P 5 82 19 23 8.5 6.5 9 6
NUST1213B ST1/2-13UNC RH6 2P 5 95 23 25 12 9 12 6
NUST1220B ST1/2-20UNF RH6 2P 5 95 23 25 12 9 12 6
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 120
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5 Type:13 K

K
Lc
Lc

X20-SFT

d
d
fl Ln Lk fl Ln Lk

Spiral fluted taps L L

◎ High-speed steel material;

◎ Complex coating, excellent wear resistance. CPM M ISO DIN
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20S04070 M4×0.7 6HX 2.5P 13 63 9 12 4.5 3.4 6 -
X20S05080 M5×0.8 6HX 2.5P 13 70 10 15 6 4.9 8 -
X20S06100 M6×1 6HX 2.5P 13 80 10 20 6 4.9 8 -
X20S07100 M7×1 6HX 2.5P 13 80 10 20 7 5.5 8 -
X20S08125 M8×1.25 6HX 2.5P 5 90 13 22 8 6.2 9 -
X20S08100 M8×1 6HX 2.5P 5 90 13 22 8 6.2 9 -
X20S10150 M10×1.5 6HX 2.5P 5 100 15 24 10 8 11 -
X20S10125 M10×1.25 6HX 2.5P 5 100 15 24 10 8 11 -
X20S10100 M10×1 6HX 2.5P 5 100 15 24 10 8 11 -
X20S12175 M12×1.75 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12150 M12×1.5 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12125 M12×1.25 6HX 2.5P 5 110 17 32 9 7 10 -
X20S12100 M12×1 6HX 2.5P 5 110 17 32 9 7 10 -
X20S14200 M14×2 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14150 M14×1.5 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14125 M14×1.25 6HX 2.5P 5 110 20 33 11 9 12 -
X20S14100 M14×1 6HX 2.5P 5 110 20 33 11 9 12 -
X20S16200 M16×2 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16150 M16×1.5 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16125 M16×1.25 6HX 2.5P 5 110 20 34 12 9 12 -
X20S16100 M16×1 6HX 2.5P 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

121 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

SFT45 Lc
Type:1

K
d
Spiral fluted taps fl Lk Type:5

K
L
Lc

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NS010025 M1×0.25 P1 1.5P 1 37 4.5 - 3 2.5 3 2
NS012025 M1.2×0.25 P1 1.5P 1 37 5.5 - 3 2.5 3 2
NS014030 M1.4×0.3 P1 1.5P 1 37 6.5 - 3 2.5 3 2
NS016035 M1.6×0.35 P2 1.5P 1 37 8 - 3 2.5 3 2
NS020040 M2×0.4 P2 2.5P 1 45 11 - 3 2.5 3 2
NS025045 M2.5×0.45 P2 2.5P 1 45 12 - 3 2.5 3 2
NS030050 M3×0.5 P2 2.5P 3 50 5 13 4 3.2 6 3
NS035060 M3.5×0.6 P2 2.5P 3 50 6 13 4 3.2 6 3
NS040070 M4×0.7 P2 2.5P 3 57 9 11 5 4 7 3
NS050080 M5×0.8 P2 2.5P 3 66 8 17 5.5 4.5 7 3
NS060100 M6×1 P2 2.5P 3 69 12 12 6 4.5 7 3
NS070100 M7×1 P3 2.5P 3 78 13 10 6.2 5 8 3
NS080125 M8×1.25 P3 2.5P 5 70 13 23 6.2 5 8 3
NS080100 M8×1 P3 2.5P 5 70 13 23 6.2 5 8 3
NS100150 M10×1.5 P4 2.5P 5 75 15 28 7 5.5 8 3
NS100125 M10×1.25 P3 2.5P 5 75 13 30 7 5.5 8 3
NS100100 M10×1 P3 2.5P 5 75 13 30 7 5.5 8 3
NS120175 M12×1.75 P4 2.5P 5 82 17 25 8.5 6.5 9 3
NS120150 M12×1.5 P4 2.5P 5 82 17 25 8.5 6.5 9 3
NS120125 M12×1.25 P4 2.5P 5 82 13 29 8.5 6.5 9 3
NS120100 M12×1 P3 2.5P 5 82 13 29 8.5 6.5 9 3
NS140200 M14×2 P5 2.5P 5 88 20 31 10.5 8 11 3
NS140150 M14×1.5 P4 2.5P 5 88 20 31 10.5 8 11 3
NS140125 M14×1.25 P4 2.5P 5 88 20 31 10.5 8 11 3
NS140100 M14×1 P3 2.5P 5 88 20 31 10.5 8 11 3
NS160200 M16×2 P5 2.5P 5 95 20 32 12.5 10 13 3
NS160150 M16×1.5 P4 2.5P 5 95 20 32 12.5 10 13 3
NS160125 M16×1.25 P4 2.5P 5 95 20 32 12.5 10 13 3
NS160100 M16×1 P3 2.5P 5 95 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 122
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

Type:1

SFT45 Lc

K
d
fl Lk
Spiral fluted taps Type:5

K
L
Lc

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NSU080 NO.0-80UNF P1 1.5P 1 37 10 - 3 2.5 3 2
NSU164 NO.1-64UNC P1 1.5P 1 37 11 - 3 2.5 3 2
NSU256 NO.2-56UNC P1 2.5P 1 45 12 - 3 2.5 3 2
NSU348 NO.3-48UNC P1 2.5P 1 45 14 - 3 2.5 3 2
NSU440 NO.4-40UNC P2 2.5P 3 45 6 10 3 2.5 3 3
NSU540 NO.5-40UNC P2 2.5P 3 50 7 12 4 3.2 6 3
NSU632 NO.6-32UNC P2 2.5P 3 50 8 12 4 3.2 6 3
NSU832 NO.8-32UNC P2 2.5P 3 57 8 13.5 5 4 7 3
NSU1024 NO.10-24UNC P2 2.5P 3 66 10 16 5.5 4.5 7 3
NSU1032 NO.10-32UNF P2 2.5P 3 66 10 16 5.5 4.5 7 3
NSU1224 NO.12-24UNC P2 2.5P 3 66 10 16 5.5 4.5 7 3
NSU1228 NO.12-28UNF P2 2.5P 3 66 10 16 5.5 4.5 7 3
NSU1420 1/4-20UNC P2 2.5P 3 69 12 17 6 4.5 7 3
NSU1428 1/4-28UNF P2 2.5P 3 69 12 17 6 4.5 7 3
NSU51618 5/16-18UNC P3 2.5P 5 70 15 15 6.1 5 8 3
NSU51624 5/16-24UNF P3 2.5P 5 70 11 19 6.1 5 8 3
NSU3816 3/8-16UNC P3 2.5P 5 75 16 27 7 5.5 8 3
NSU3824 3/8-24UNF P3 2.5P 5 75 11 32 7 5.5 8 3
NSU71614 7/16-14UNC P4 2.5P 5 80 20 20 8 6 9 3
NSU71620 7/16-20UNF P3 2.5P 5 80 13 27 8 6 9 3
NSU1213 1/2-13UNC P4 2.5P 5 85 21 27 9 7 10 3
NSU1220 1/2-20UNF P3 2.5P 5 85 13 35 9 7 10 3
NSU91612 9/16-12UNC P4 2.5P 5 90 21 29 10.5 8 11 3
NSU91618 9/16-18UNF P3 2.5P 5 90 15 35 10.5 8 11 3
NSU5811 5/8-11UNC P4 2.5P 5 95 23 25 12 9 12 3
NSU5818 5/8-18UNF P3 2.5P 5 95 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

123 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

S-SFT Type:3
Type:5

K
Lc
Lc

SFT Spiral fluted taps

d
fl Ln Lk
with fine thread L

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NS030035 M3×0.35 P2 2.5P 3 50 5 13 4 3.2 6 3
NS035035 M3.5×0.35 P2 2.5P 3 50 6 13 4 3.2 6 3
NS040050 M4×0.5 P2 2.5P 3 57 9 11 5 4 7 3
NS050050 M5×0.5 P2 2.5P 3 66 8 17 5.5 4.5 7 3
NS060050 M6×0.5 P2 2.5P 3 69 12 12 6 4.5 7 3
NS060075 M6×0.75 P2 2.5P 3 69 12 12 6 4.5 7 3
NS070075 M7×0.75 P3 2.5P 3 78 13 10 6.2 5 8 3
NS080075 M8×0.75 P3 2.5P 5 70 13 23 6.2 5 8 3
NS100075 M10×0.75 P3 2.5P 5 75 13 30 7 5.5 8 3
NSU640 NO.6-40UNF P2 2.5P 3 50 8 12 4 3.2 6 3
NSU836 NO.8-36UNF P2 2.5P 3 57 8 13.5 5 4 7 3
Tolerances under 6H/2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 124
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5

K
Lc

d
L-SFT fl Ln
L

Type:7
Lk

SFT Spiral fluted taps with long shank

◎ High-speed steel material;
◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NS020480 M2×0.4 P2 2.5P 7 80 9 6 3 2.5 5 2
NS0204100 M2×0.4 P2 2.5P 7 100 9 6 3 2.5 5 2
NS02504580 M2.5×0.45 P2 2.5P 7 80 9 6 3 2.5 5 2
NS025045100 M2.5×0.45 P2 2.5P 7 100 9 6 3 2.5 5 2
NS030580 M3×0.5 P2 2.5P 7 80 12 7 4 3.2 6 3
NS0305100 M3×0.5 P2 2.5P 7 100 12 7 4 3.2 6 3
NS0305120 M3×0.5 P2 2.5P 7 120 12 7 4 3.2 6 3
NS0305150 M3×0.5 P2 2.5P 7 150 12 7 4 3.2 6 3
NS0350680 M3.5×0.6 P2 2.5P 7 80 13 7 4 3.2 6 3
NS03506100 M3.5×0.6 P2 2.5P 7 100 13 7 4 3.2 6 3
NS03506120 M3.5×0.6 P2 2.5P 7 120 13 7 4 3.2 6 3
NS03506150 M3.5×0.6 P2 2.5P 7 150 13 7 4 3.2 6 3
NS040780 M4×0.7 P2 2.5P 7 80 14 7 5 4 7 3
NS0407100 M4×0.7 P2 2.5P 7 100 14 7 5 4 7 3
NS0407120 M4×0.7 P2 2.5P 7 120 14 7 5 4 7 3
NS0407150 M4×0.7 P2 2.5P 7 150 14 7 5 4 7 3
NS050880 M5×0.8 P2 2.5P 7 80 16 9 5.5 4.5 7 3
NS0508100 M5×0.8 P2 2.5P 7 100 16 9 5.5 4.5 7 3
NS0508120 M5×0.8 P2 2.5P 7 120 16 9 5.5 4.5 7 3
NS0508150 M5×0.8 P2 2.5P 7 150 16 9 5.5 4.5 7 3
NS061080 M6×1 P2 2.5P 7 80 19.5 9.5 6 4.5 7 3
NS0610100 M6×1 P2 2.5P 7 100 19.5 9.5 6 4.5 7 3
NS0610120 M6×1 P2 2.5P 7 120 19.5 9.5 6 4.5 7 3
NS0610150 M6×1 P2 2.5P 7 150 19.5 9.5 6 4.5 7 3
NS0710100 M7X1 P3 2.5P 7 100 13 10 6.2 5 8 3
NS0710120 M7X1 P3 2.5P 7 120 13 10 6.2 5 8 3
NS0710150 M7X1 P3 2.5P 7 150 13 10 6.2 5 8 3
NS08125100 M8×1.25 P3 2.5P 5 100 22 15 6.2 5 8 3
NS08125120 M8×1.25 P3 2.5P 5 120 22 15 6.2 5 8 3
NS08125150 M8×1.25 P3 2.5P 5 150 22 15 6.2 5 8 3
NS0810100 M8×1 P3 2.5P 5 100 22 15 6.2 5 8 3
NS0810120 M8×1 P3 2.5P 5 120 22 15 6.2 5 8 3
NS0810150 M8×1 P3 2.5P 5 150 22 15 6.2 5 8 3
NS1015100 M10×1.5 P4 2.5P 5 100 24 19 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

125 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

L-SFT
Type:5

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NS1015120 M10×1.5 P4 2.5P 5 120 24 19 7 5.5 8 3
NS1015150 M10×1.5 P4 2.5P 5 150 24 19 7 5.5 8 3
NS10125100 M10×1.25 P3 2.5P 5 100 24 19 7 5.5 8 3
NS10125120 M10×1.25 P3 2.5P 5 120 24 19 7 5.5 8 3
NS10125150 M10×1.25 P3 2.5P 5 150 24 19 7 5.5 8 3
NS1010100 M10×1 P3 2.5P 5 100 24 19 7 5.5 8 3
NS1010120 M10×1 P3 2.5P 5 120 24 19 7 5.5 8 3
NS1010150 M10×1 P3 2.5P 5 150 24 19 7 5.5 8 3
NS12175100 M12×1.75 P4 2.5P 5 100 29 17 8.5 6.5 9 3
NS12175120 M12×1.75 P4 2.5P 5 120 29 17 8.5 6.5 9 3
NS12175150 M12×1.75 P4 2.5P 5 150 29 17 8.5 6.5 9 3
NS1215100 M12×1.5 P4 2.5P 5 100 29 17 8.5 6.5 9 3
NS1215120 M12×1.5 P4 2.5P 5 120 29 17 8.5 6.5 9 3
NS1215150 M12×1.5 P4 2.5P 5 150 29 17 8.5 6.5 9 3
NS12125100 M12X1.25 P4 2.5P 5 100 29 17 8.5 6.5 9 3
NS12125120 M12X1.25 P4 2.5P 5 120 29 17 8.5 6.5 9 3
NS12125150 M12X1.25 P4 2.5P 5 150 29 17 8.5 6.5 9 3
NS1210100 M12×1 P3 2.5P 5 100 29 17 8.5 6.5 9 3
NS1210120 M12×1 P3 2.5P 5 120 29 17 8.5 6.5 9 3
NS1210150 M12×1 P3 2.5P 5 150 29 17 8.5 6.5 9 3
NS1420120 M14×2 P5 2.5P 5 120 20 31 10.5 8 11 3
NS1420150 M14×2 P5 2.5P 5 150 20 31 10.5 8 11 3
NS1415120 M14×1.5 P4 2.5P 5 120 20 31 10.5 8 11 3
NS1415150 M14×1.5 P4 2.5P 5 150 20 31 10.5 8 11 3
NS14125120 M14×1.25 P4 2.5P 5 120 20 31 10.5 8 11 3
NS14125150 M14×1.25 P4 2.5P 5 150 20 31 10.5 8 11 3
NS1410120 M14×1 P3 2.5P 5 120 20 31 10.5 8 11 3
NS1410150 M14×1 P3 2.5P 5 150 20 31 10.5 8 11 3
NS1620120 M16×2 P5 2.5P 5 120 20 32 12.5 10 13 3
NS1620150 M16×2 P5 2.5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 126
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5
L-SFT

K
Lc

SFT Spiral fluted taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NS1615120 M16×1.5 P4 2.5P 5 120 20 32 12.5 10 13 3
NS1615150 M16×1.5 P4 2.5P 5 150 20 32 12.5 10 13 3
NS16125120 M16×1.25 P4 2.5P 5 120 20 32 12.5 10 13 3
NS16125150 M16×1.25 P4 2.5P 5 150 20 32 12.5 10 13 3
NS1610120 M16×1 P3 2.5P 5 120 20 32 12.5 10 13 3
NS1610150 M16×1 P3 2.5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

127 NINGBO NICHE TOOLS CO. LTD

 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5

K
Lc

d
L-SFT fl Ln
L
Lk

Type:7
SFT Spiral fluted taps with long shank
◎ High-speed steel material;
◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NSU44080 NO.4-40UNC P2 2.5P 7 80 10 6 3 2.5 5 3
NSU440100 NO.4-40UNC P2 2.5P 7 100 10 6 3 2.5 5 3
NSU54080 NO.5-40UNC P2 2.5P 7 80 12 7 4 3.2 6 3
NSU540100 NO.5-40UNC P2 2.5P 7 100 12 7 4 3.2 6 3
NSU63280 NO.6-32UNC P2 2.5P 7 80 13 7 4 3.2 6 3
NSU632100 NO.6-32UNC P2 2.5P 7 100 13 7 4 3.2 6 3
NSU632120 NO.6-32UNC P2 2.5P 7 120 13 7 4 3.2 6 3
NSU632150 NO.6-32UNC P2 2.5P 7 150 13 7 4 3.2 6 3
NSU83280 NO.8-32UNC P2 2.5P 7 80 13.5 8 5 4 7 3
NSU832100 NO.8-32UNC P2 2.5P 7 100 13.5 8 5 4 7 3
NSU832120 NO.8-32UNC P2 2.5P 7 120 13.5 8 5 4 7 3
NSU832150 NO.8-32UNC P2 2.5P 7 150 13.5 8 5 4 7 3
NSU102480 NO.10-24UNC P2 2.5P 7 80 16.5 9.5 5.5 4.5 7 3
NSU1024100 NO.10-24UNC P2 2.5P 7 100 16.5 9.5 5.5 4.5 7 3
NSU1024120 NO.10-24UNC P2 2.5P 7 120 16.5 9.5 5.5 4.5 7 3
NSU1024150 NO.10-24UNC P2 2.5P 7 150 16.5 9.5 5.5 4.5 7 3
NSU122480 NO.12-24UNC P2 2.5P 7 80 16.5 9.5 5.5 4.5 7 3
NSU1224100 NO.12-24UNC P2 2.5P 7 100 16.5 9.5 5.5 4.5 7 3
NSU1224120 NO.12-24UNC P2 2.5P 7 120 16.5 9.5 5.5 4.5 7 3
NSU1224150 NO.12-24UNC P2 2.5P 7 150 16.5 9.5 5.5 4.5 7 3
NSU142080 1/4-20UNC P2 2.5P 7 80 19.5 9.5 6 4.5 7 3
NSU1420100 1/4-20UNC P2 2.5P 7 100 19.5 9.5 6 4.5 7 3
NSU1420120 1/4-20UNC P2 2.5P 7 120 19.5 9.5 6 4.5 7 3
NSU1420150 1/4-20UNC P2 2.5P 7 150 19.5 9.5 6 4.5 7 3
NSU51618100 5/16-18UNC P3 2.5P 5 100 23 15 6.1 5 8 3
NSU51618120 5/16-18UNC P3 2.5P 5 120 23 15 6.1 5 8 3
NSU51618150 5/16-18UNC P3 2.5P 5 150 23 15 6.1 5 8 3
NSU51624100 5/16-24UNF P3 2.5P 5 100 23 15 6.1 5 8 3
NSU51624120 5/16-24UNF P3 2.5P 5 120 23 15 6.1 5 8 3
NSU51624150 5/16-24UNF P3 2.5P 5 150 23 15 6.1 5 8 3
NSU3816100 3/8-16UNC P3 2.5P 5 100 25 18 7 5.5 8 3
NSU3816120 3/8-16UNC P3 2.5P 5 120 25 18 7 5.5 8 3
NSU3816150 3/8-16UNC P3 2.5P 5 150 25 18 7 5.5 8 3
NSU3824100 3/8-24UNF P3 2.5P 5 100 25 18 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 128
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5

L-SFT

K
Lc

d
SFT Spiral fluted taps with long shank fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NSU3824120 3/8-24UNF P3 2.5P 5 120 25 18 7 5.5 8 3

NSU3824150 3/8-24UNF P3 2.5P 5 150 25 18 7 5.5 8 3

NSU71614100 7/16-14UNC P4 2.5P 5 100 29 16 8 6 9 3

NSU71614120 7/16-14UNC P4 2.5P 5 120 29 16 8 6 9 3

NSU71614150 7/16-14UNC P4 2.5P 5 150 29 16 8 6 9 3

NSU71620100 7/16-20UNF P3 2.5P 5 100 29 16 8 6 9 3

NSU71620120 7/16-20UNF P3 2.5P 5 120 29 16 8 6 9 3

NSU71620150 7/16-20UNF P3 2.5P 5 150 29 16 8 6 9 3

NSU1213100 1/2-13UNC P4 2.5P 5 100 30 18 9 7 10 3

NSU1213120 1/2-13UNC P4 2.5P 5 120 30 18 9 7 10 3

NSU1213150 1/2-13UNC P4 2.5P 5 150 30 18 9 7 10 3

NSU1220100 1/2-20UNF P3 2.5P 5 100 30 18 9 7 10 3

NSU1220120 1/2-20UNF P3 2.5P 5 120 30 18 9 7 10 3

NSU1220150 1/2-20UNF P3 2.5P 5 150 30 18 9 7 10 3

NSU91612120 9/16-12UNC P4 2.5P 5 120 30 20 10.5 8 11 3

NSU91612150 9/16-12UNC P4 2.5P 5 150 30 20 10.5 8 11 3

NSU91618120 9/16-18UNF P3 2.5P 5 120 30 20 10.5 8 11 3

NSU91618150 9/16-18UNF P3 2.5P 5 150 30 20 10.5 8 11 3

NSU5811120 5/8-11UNC P4 2.5P 5 120 23 25 12 9 12 3

NSU5811150 5/8-11UNC P4 2.5P 5 150 23 25 12 9 12 3

NSU5818120 5/8-18UNF P3 2.5P 5 120 23 25 12 9 12 3

NSU5818150 5/8-18UNF P3 2.5P 5 150 23 25 12 9 12 3

Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

129 NINGBO NICHE TOOLS CO. LTD

 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:4
Lc

ST-SFT Type:2
L

ST Spiral fluted taps Type:5

K
Lc
L

d
fl Ln Lk
L
◎ High-speed steel material;
◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NST020040 ST2X0.4 P1 2.5P 2 43 12 - 3 2.5 3 2
NST025045 ST2.5X0.45 P1 2.5P 2 48 15 - 4 3.2 6 3
NST030050 ST3X0.5 P2 2.5P 2 48 16 - 5 4 7 3
NST040070 ST4X0.7 P2 2.5P 4 63 12 10 5.5 4.5 7 3
NST050080 ST5X0.8 P2 2.5P 4 66 12 12 6 4.5 7 3
NST060100 ST6X1 P2 2.5P 5 70 13 23 6.2 5 8 3
NST080125 ST8X1.25 P2 2.5P 5 75 13 30 7 5.5 8 3
NST100150 ST10X1.5 P2 2.5P 5 82 17 25 8.5 6.5 9 3
NST120175 ST12X1.75 P3 2.5P 5 88 20 31 10.5 8 11 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 130
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:4 Type:5

K
Lc
ST-SFT
Lc

d
ST Spiral fluted taps L
fl Ln
L
Lk

◎ High-speed steel material;

◎ YC-C50 coating, smooth chip removal, excellent wear resistance.
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC, etc.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NUST256 STNO.2-56UNC P1 2.5P 4 43 10 6 3 2.5 3 3
NUST440 STNO.4-40UNC P1 2.5P 4 48 13 7 4 3.2 6 3
NUST632 STNO.6-32UNC P2 2.5P 4 54 14 7 5 4 7 3
NUST832 STNO.8-32UNC P2 2.5P 4 63 16 9 5.5 4.5 7 3
NUST1024 STNO.10-24UNC P2 2.5P 4 66 19.5 9.5 6 4.5 7 3
NUST1420 ST1/4-20UNC P2 2.5P 5 70 23 15 6.1 5 8 3
NUST51618 ST5/16-18UNC P2 2.5P 5 75 24 19 7 5.5 8 3
NUST3816 ST3/8-16UNC P2 2.5P 5 82 29 17 8.5 6.5 9 3
NUST71614 ST7/16-14UNC P3 2.5P 5 88 20 31 10.5 8 11 3
NUST1213 ST1/2-13UNC P3 2.5P 5 95 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

131 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

X20-POT Type:13 K Type:5

K
Lc
Lc

X20 Spiral opinted taps

d
d
fl Ln Lk fl Ln Lk
L L

◎ High-speed steel material;

◎ Complex coating, excellent wear resistance. CPM M ISO DIN
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20P04070 M4×0.7 6HX 5P 13 63 9 12 4.5 3.4 6 -
X20P05080 M5×0.8 6HX 5P 13 70 10 15 6 4.9 8 -
X20P06100 M6×1 6HX 5P 13 80 10 20 6 4.9 8 -
X20P07100 M7×1 6HX 5P 13 80 10 20 7 5.5 8 -
X20P08125 M8×1.25 6HX 5P 5 90 13 22 8 6.2 9 -
X20P08100 M8×1 6HX 5P 5 90 13 22 8 6.2 9 -
X20P10150 M10×1.5 6HX 5P 5 100 15 24 10 8 11 -
X20P10125 M10×1.25 6HX 5P 5 100 15 24 10 8 11 -
X20P10100 M10×1 6HX 5P 5 100 15 24 10 8 11 -
X20P12175 M12×1.75 6HX 5P 5 110 17 32 9 7 10 -
X20P12150 M12×1.5 6HX 5P 5 110 17 32 9 7 10 -
X20P12125 M12×1.25 6HX 5P 5 110 17 32 9 7 10 -
X20P12100 M12×1 6HX 5P 5 110 17 32 9 7 10 -
X20P14200 M14×2 6HX 5P 5 110 20 33 11 9 12 -
X20P14150 M14×1.5 6HX 5P 5 110 20 33 11 9 12 -
X20P14125 M14×1.25 6HX 5P 5 110 20 33 11 9 12 -
X20P14100 M14×1 6HX 5P 5 110 20 33 11 9 12 -
X20P16200 M16×2 6HX 5P 5 110 20 34 12 9 12 -
X20P16150 M16×1.5 6HX 5P 5 110 20 34 12 9 12 -
X20P16125 M16×1.25 6HX 5P 5 110 20 34 12 9 12 -
X20P16100 M16×1 6HX 5P 5 110 20 34 12 9 12 -
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 132
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

Type:1
Lc

K
POT

d
fl Lk
Spiral pointed taps Type:5

K
L
Lc

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NP010025 M1×0.25 P1 5P 1 37 4.5 - 3 2.5 3 2
NP012025 M1.2×0.25 P1 5P 1 37 5.5 - 3 2.5 3 2
NP014030 M1.4×0.3 P1 5P 1 37 9 - 3 2.5 3 2
NP016035 M1.6×0.35 P2 5P 1 37 8 - 3 2.5 3 2
NP020040 M2×0.4 P2 5P 1 45 11 - 3 2.5 3 2
NP025045 M2.5×0.45 P2 5P 1 45 12 - 3 2.5 3 2
NP030050 M3×0.5 P2 5P 3 50 12 7 4 3.2 6 3
NP035060 M3.5×0.6 P2 5P 3 50 13 7 4 3.2 6 3
NP040070 M4×0.7 P2 5P 3 57 14 7 5 4 7 3
NP050080 M5×0.8 P2 5P 3 66 16 9 5.5 4.5 7 3
NP060100 M6×1 P2 5P 3 69 19.5 9.5 6 4.5 7 3
NP070100 M7×1 P3 5P 3 78 13 10 6.2 5 8 3
NP080125 M8×1.25 P3 5P 5 70 22 15 6.2 5 8 3
NP080100 M8×1 P3 5P 5 70 22 15 6.2 5 8 3
NP100150 M10×1.5 P4 5P 5 75 24 19 7 5.5 8 3
NP100125 M10×1.25 P3 5P 5 75 24 19 7 5.5 8 3
NP100100 M10×1 P3 5P 5 75 24 19 7 5.5 8 3
NP120175 M12×1.75 P4 5P 5 82 29 17 8.5 6.5 9 3
NP120150 M12×1.5 P4 5P 5 82 29 17 8.5 6.5 9 3
NP120125 M12×1.25 P4 5P 5 82 29 17 8.5 6.5 9 3
NP120100 M12×1 P3 5P 5 82 29 17 8.5 6.5 9 3
NP140200 M14×2 P5 5P 5 88 20 31 10.5 8 11 3
NP140150 M14×1.5 P4 5P 5 88 20 31 10.5 8 11 3
NP140125 M14×1.25 P4 5P 5 88 20 31 10.5 8 11 3
NP140100 M14×1 P3 5P 5 88 20 31 10.5 8 11 3
NP160200 M16×2 P5 5P 5 95 20 32 12.5 10 13 3
NP160150 M16×1.5 P4 5P 5 95 20 32 12.5 10 13 3
NP160125 M16×1.25 P4 5P 5 95 20 32 12.5 10 13 3
NP160100 M16×1 P3 5P 5 95 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

133 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

POT Lc
Type:1

K
Spiral pointed taps

d
fl Lk Type:5

K
L
Lc

d
fl Ln Lk
L
◎ High-speed steel material;
◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NPU080 NO.0-80UNF P1 5P 1 37 10 - 3 2.5 3 2
NPU164 NO.1-64UNC P1 5P 1 37 11 - 3 2.5 3 2
NPU256 NO.2-56UNC P1 5P 1 45 12 - 3 2.5 3 2
NPU348 NO.3-48UNC P1 5P 1 45 14 - 3 2.5 3 2
NPU440 NO.4-40UNC P2 5P 1 45 13 - 3 2.5 3 2
NPU540 NO.5-40UNC P2 5P 3 50 12 7 4 3.2 6 3
NPU632 NO.6-32UNC P2 5P 3 50 13 7 4 3.2 6 3
NPU832 NO.8-32UNC P2 5P 3 57 13.5 8 5 4 7 3
NPU1024 NO.10-24UNC P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
NPU1032 NO.10-32UNF P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
NPU1224 NO.12-24UNC P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
NPU1228 NO.12-28UNF P2 5P 3 66 16.5 9.5 5.5 4.5 7 3
NPU1420 1/4-20UNC P2 5P 3 69 19.5 9.5 6 4.5 7 3
NPU1428 1/4-28UNF P2 5P 3 69 19.5 9.5 6 4.5 7 3
NPU51618 5/16-18UNC P3 5P 5 70 23 15 6.1 5 8 3
NPU51624 5/16-24UNF P3 5P 5 70 23 15 6.1 5 8 3
NPU3816 3/8-16UNC P3 5P 5 75 25 18 7 5.5 8 3
NPU3824 3/8-24UNF P3 5P 5 75 25 18 7 5.5 8 3
NPU71614 7/16-14UNC P4 5P 5 80 29 16 8 6 9 3
NPU71620 7/16-20UNF P3 5P 5 80 29 16 8 6 9 3
NPU1213 1/2-13UNC P4 5P 5 85 30 18 9 7 10 3
NPU1220 1/2-20UNF P3 5P 5 85 30 18 9 7 10 3
NPU91612 9/16-12UNC P4 5P 5 90 30 20 10.5 8 11 3
NPU91618 9/16-18UNF P3 5P 5 90 30 20 10.5 8 11 3
NPU5811 5/8-11UNC P4 5P 5 95 23 25 12 9 12 3
NPU5818 5/8-18UNF P3 5P 5 95 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 134
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:3
Lc

S-POT
Spiral pointed taps with fine thread Type:5

K
Lc

d
fl Ln Lk
L
◎ High-speed steel material;
◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NP030035 M3×0.35 P2 5P 3 50 5 13 4 3.2 6 3
NP035035 M3.5×0.35 P2 5P 3 50 6 13 4 3.2 6 3
NP040050 M4×0.5 P2 5P 3 57 9 11 5 4 7 3
NP050050 M5×0.5 P2 5P 3 66 8 17 5.5 4.5 7 3
NP060050 M6×0.5 P2 5P 3 69 12 12 6 4.5 7 3
NP060075 M6×0.75 P2 5P 3 69 12 12 6 4.5 7 3
NP070075 M7×0.75 P3 5P 3 78 13 10 6.2 5 8 3
NP080075 M8×0.75 P3 5P 5 70 13 23 6.2 5 8 3
NP100075 M10×0.75 P3 5P 5 75 13 30 7 5.5 8 3
NPU640 NO.6-40UNF P2 5P 3 50 8 12 4 3.2 6 3
NPU836 NO.8-36UNF P2 5P 3 57 8 13.5 5 4 7 3
Tolerances under 6H/2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

135 NINGBO NICHE TOOLS CO. LTD

TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5

K
Lc

L-POT

d
fl Ln Lk
L

Spiral pointed taps with long shank Type:7

◎ High-speed steel material;

◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NP020480 M2×0.4 P2 5P 7 80 9 6 3 2.5 5 2
NP0204100 M2×0.4 P2 5P 7 100 9 6 3 2.5 5 2
NP02504580 M2.5×0.45 P2 5P 7 80 9 6 3 2.5 5 2
NP025045100 M2.5×0.45 P2 5P 7 100 9 6 3 2.5 5 2
NP030580 M3×0.5 P2 5P 7 80 12 7 4 3.2 6 3
NP0305100 M3×0.5 P2 5P 7 100 12 7 4 3.2 6 3
NP0305120 M3×0.5 P2 5P 7 120 12 7 4 3.2 6 3
NP0305150 M3×0.5 P2 5P 7 150 12 7 4 3.2 6 3
NP0350680 M3.5×0.6 P2 5P 7 80 13 7 4 3.2 6 3
NP03506100 M3.5×0.6 P2 5P 7 100 13 7 4 3.2 6 3
NP03506120 M3.5×0.6 P2 5P 7 120 13 7 4 3.2 6 3
NP03506150 M3.5×0.6 P2 5P 7 150 13 7 4 3.2 6 3
NP040780 M4×0.7 P2 5P 7 80 14 7 5 4 7 3
NP0407100 M4×0.7 P2 5P 7 100 14 7 5 4 7 3
NP0407120 M4×0.7 P2 5P 7 120 14 7 5 4 7 3
NP0407150 M4×0.7 P2 5P 7 150 14 7 5 4 7 3
NP050880 M5×0.8 P2 5P 7 80 16 9 5.5 4.5 7 3
NP0508100 M5×0.8 P2 5P 7 100 16 9 5.5 4.5 7 3
NP0508120 M5×0.8 P2 5P 7 120 16 9 5.5 4.5 7 3
NP0508150 M5×0.8 P2 5P 7 150 16 9 5.5 4.5 7 3
NP061080 M6×1 P2 5P 7 80 19.5 9.5 6 4.5 7 3
NP0610100 M6×1 P2 5P 7 100 19.5 9.5 6 4.5 7 3
NP0610120 M6×1 P2 5P 7 120 19.5 9.5 6 4.5 7 3
NP0610150 M6×1 P2 5P 7 150 19.5 9.5 6 4.5 7 3
NP0710100 M7×1 P3 5P 7 100 13 10 6.2 5 8 3
NP0710120 M7×1 P3 5P 7 120 13 10 6.2 5 8 3
NP0710150 M7×1 P3 5P 7 150 13 10 6.2 5 8 3
NP08125100 M8×1.25 P3 5P 5 100 22 15 6.2 5 8 3
NP08125120 M8×1.25 P3 5P 5 120 22 15 6.2 5 8 3
NP08125150 M8×1.25 P3 5P 5 150 22 15 6.2 5 8 3
NP0810100 M8×1 P3 5P 5 100 22 15 6.2 5 8 3
NP0810120 M8×1 P3 5P 5 120 22 15 6.2 5 8 3
NP0810150 M8×1 P3 5P 5 150 22 15 6.2 5 8 3
NP1015100 M10×1.5 P4 5P 5 100 24 19 7 5.5 8 3
NP1015120 M10×1.5 P4 5P 5 120 24 19 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 136
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

L-POT Type:5

K
Lc

Spiral pointed taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NP1015150 M10×1.5 P4 5P 5 150 24 19 7 5.5 8 3
NP10125100 M10×1.25 P3 5P 5 100 24 19 7 5.5 8 3
NP10125120 M10×1.25 P3 5P 5 120 24 19 7 5.5 8 3
NP10125150 M10×1.25 P3 5P 5 150 24 19 7 5.5 8 3
NP1010100 M10×1 P3 5P 5 100 24 19 7 5.5 8 3
NP1010120 M10×1 P3 5P 5 120 24 19 7 5.5 8 3
NP1010150 M10×1 P3 5P 5 150 24 19 7 5.5 8 3
NP12175100 M12×1.75 P4 5P 5 100 29 17 8.5 6.5 9 3
NP12175120 M12×1.75 P4 5P 5 120 29 17 8.5 6.5 9 3
NP12175150 M12×1.75 P4 5P 5 150 29 17 8.5 6.5 9 3
NP1215100 M12×1.5 P4 5P 5 100 29 17 8.5 6.5 9 3
NP1215120 M12×1.5 P4 5P 5 120 29 17 8.5 6.5 9 3
NP1215150 M12×1.5 P4 5P 5 150 29 17 8.5 6.5 9 3
NP12125100 M12×1.25 P4 5P 5 100 29 17 8.5 6.5 9 3
NP12125120 M12×1.25 P4 5P 5 120 29 17 8.5 6.5 9 3
NP12125150 M12×1.25 P4 5P 5 150 29 17 8.5 6.5 9 3
NP1210100 M12×1 P3 5P 5 100 29 17 8.5 6.5 9 3
NP1210120 M12×1 P3 5P 5 120 29 17 8.5 6.5 9 3
NP1210150 M12×1 P3 5P 5 150 29 17 8.5 6.5 9 3
NP1420120 M14×2 P5 5P 5 120 20 31 10.5 8 11 3
NP1420150 M14×2 P5 5P 5 150 20 31 10.5 8 11 3
NP1415120 M14×1.5 P4 5P 5 120 20 31 10.5 8 11 3
NP1415150 M14×1.5 P4 5P 5 150 20 31 10.5 8 11 3
NP14125120 M14×1.25 P4 5P 5 120 20 31 10.5 8 11 3
NP14125150 M14×1.25 P4 5P 5 150 20 31 10.5 8 11 3
NP1410120 M14×1 P3 5P 5 120 20 31 10.5 8 11 3
NP1410150 M14×1 P3 5P 5 150 20 31 10.5 8 11 3
NP1620120 M16×2 P5 5P 5 120 20 32 12.5 10 13 3
NP1620150 M16×2 P5 5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

137 NINGBO NICHE TOOLS CO. LTD

 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

L-POT Type:5

K
Lc

Spiral pointed taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NP1615120 M16×1.5 P4 5P 5 120 20 32 12.5 10 13 3
NP1615150 M16×1.5 P4 5P 5 150 20 32 12.5 10 13 3
NP16125120 M16×1.25 P4 5P 5 120 20 32 12.5 10 13 3
NP16125150 M16×1.25 P4 5P 5 150 20 32 12.5 10 13 3
NP1610120 M16×1 P3 5P 5 120 20 32 12.5 10 13 3
NP1610150 M16×1 P3 5P 5 150 20 32 12.5 10 13 3
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 138
 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

Type:5

K
Lc

d
L-POT
fl Ln Lk
L

Type:7

Spiral pointed taps with long shank

◎ High-speed steel material;
◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NPU44080 NO.4-40UNC P2 5P 7 80 10 6 3 2.5 5 2
NPU440100 NO.4-40UNC P2 5P 7 100 10 6 3 2.5 5 2
NPU54080 NO.5-40UNC P2 5P 7 80 12 7 4 3.2 6 3
NPU540100 NO.5-40UNC P2 5P 7 100 12 7 4 3.2 6 3
NPU63280 NO.6-32UNC P2 5P 7 80 13 7 4 3.2 6 3
NPU632100 NO.6-32UNC P2 5P 7 100 13 7 4 3.2 6 3
NPU632120 NO.6-32UNC P2 5P 7 120 13 7 4 3.2 6 3
NPU632150 NO.6-32UNC P2 5P 7 150 13 7 4 3.2 6 3
NPU83280 NO.8-32UNC P2 5P 7 80 13.5 8 5 4 7 3
NPU832100 NO.8-32UNC P2 5P 7 100 13.5 8 5 4 7 3
NPU832120 NO.8-32UNC P2 5P 7 120 13.5 8 5 4 7 3
NPU832150 NO.8-32UNC P2 5P 7 150 13.5 8 5 4 7 3
NPU102480 NO.10-24UNC P2 5P 7 80 16.5 9.5 5.5 4.5 7 3
NPU1024100 NO.10-24UNC P2 5P 7 100 16.5 9.5 5.5 4.5 7 3
NPU1024120 NO.10-24UNC P2 5P 7 120 16.5 9.5 5.5 4.5 7 3
NPU1024150 NO.10-24UNC P2 5P 7 150 16.5 9.5 5.5 4.5 7 3
NPU122480 NO.12-24UNC P2 5P 7 80 16.5 9.5 5.5 4.5 7 3
NPU1224100 NO.12-24UNC P2 5P 7 100 16.5 9.5 5.5 4.5 7 3
NPU1224120 NO.12-24UNC P2 5P 7 120 16.5 9.5 5.5 4.5 7 3
NPU1224150 NO.12-24UNC P2 5P 7 150 16.5 9.5 5.5 4.5 7 3
NPU142080 1/4-20UNC P2 5P 7 80 19.5 9.5 6 4.5 7 3
NPU1420100 1/4-20UNC P2 5P 7 100 19.5 9.5 6 4.5 7 3
NPU1420120 1/4-20UNC P2 5P 7 120 19.5 9.5 6 4.5 7 3
NPU1420150 1/4-20UNC P2 5P 7 150 19.5 9.5 6 4.5 7 3
NPU51618100 5/16-18UNC P3 5P 5 100 23 15 6.1 5 8 3
NPU51618120 5/16-18UNC P3 5P 5 120 23 15 6.1 5 8 3
NPU51618150 5/16-18UNC P3 5P 5 150 23 15 6.1 5 8 3
NPU51624100 5/16-24UNF P3 5P 5 100 23 15 6.1 5 8 3
NPU51624120 5/16-24UNF P3 5P 5 120 23 15 6.1 5 8 3
NPU51624150 5/16-24UNF P3 5P 5 150 23 15 6.1 5 8 3
NPU3816100 3/8-16UNC P3 5P 5 100 25 18 7 5.5 8 3
NPU3816120 3/8-16UNC P3 5P 5 120 25 18 7 5.5 8 3
NPU3816150 3/8-16UNC P3 5P 5 150 25 18 7 5.5 8 3
NPU3824100 3/8-24UNF P3 5P 5 100 25 18 7 5.5 8 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

139 NINGBO NICHE TOOLS CO. LTD

 TAPS FOR ALUMINUM, COOPER AND NON-FERROUS METALS

L-POT Type:5

K
Lc

Spiral pointed taps with long shank

d
fl Ln Lk
L

◎ High-speed steel material;

◎ YC-C50 coating, forward chip removal, excellant wear resistance
◎ Suitable for processing non-ferrous metals, ADC, AC, ZDC, MC, Cu, BSC.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
NPU3824120 3/8-24UNF P3 5P 5 120 25 18 7 5.5 8 3
NPU3824150 3/8-24UNF P3 5P 5 150 25 18 7 5.5 8 3
NPU71614100 7/16-14UNC P4 5P 5 100 29 16 8 6 9 3
NPU71614120 7/16-14UNC P4 5P 5 120 29 16 8 6 9 3
NPU71614150 7/16-14UNC P4 5P 5 150 29 16 8 6 9 3
NPU71620100 7/16-20UNF P3 5P 5 100 29 16 8 6 9 3
NPU71620120 7/16-20UNF P3 5P 5 120 29 16 8 6 9 3
NPU71620150 7/16-20UNF P3 5P 5 150 29 16 8 6 9 3
NPU1213100 1/2-13UNC P4 5P 5 100 30 18 9 7 10 3
NPU1213120 1/2-13UNC P4 5P 5 120 30 18 9 7 10 3
NPU1213150 1/2-13UNC P4 5P 5 150 30 18 9 7 10 3
NPU1220100 1/2-20UNF P3 5P 5 100 30 18 9 7 10 3
NPU1220120 1/2-20UNF P3 5P 5 120 30 18 9 7 10 3
NPU1220150 1/2-20UNF P3 5P 5 150 30 18 9 7 10 3
NPU91612120 9/16-12UNC P4 5P 5 120 30 20 10.5 8 11 3
NPU91612150 9/16-12UNC P4 5P 5 150 30 20 10.5 8 11 3
NPU91618120 9/16-18UNF P3 5P 5 120 30 20 10.5 8 11 3
NPU91618150 9/16-18UNF P3 5P 5 150 30 20 10.5 8 11 3
NPU5811120 5/8-11UNC P4 5P 5 120 23 25 12 9 12 3
NPU5811150 5/8-11UNC P4 5P 5 150 23 25 12 9 12 3
NPU5818120 5/8-18UNF P3 5P 5 120 23 25 12 9 12 3
NPU5818150 5/8-18UNF P3 5P 5 150 23 25 12 9 12 3
Tolerances under 2B standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 140
141 NINGBO NICHE TOOLS CO. LTD
 INDEX
TAPS FOR CAST IRON

X20 SPIRAL POINTED TAPS ..............................................................................................143

SPIRAL POINTED TAPS.......................................................................................................144
HT STRAIGHT FLUTED TAPS .............................................................................................146
HT STRAIGHT FLUTED TAPS WITH INTERNAL COOLANT .........................................147

[Link] 142
 STRAIGHT FLUTED TAPS FOR CAST IRON

HT Lc
Type:3
Type:5

HT Steel straight fluted taps

◎ High-speed steel material;

◎ YC-T50 coating, excellent wear resistance.
◎ Suitable for gray cast iron, ductile cast iron mass continuous
processing threading, high processing accuracy

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
KH050080 M5×0.8 P3 2.5P 3 66 16 9 5.5 4.5 7 3
KH060100 M6×1 P3 2.5P 3 69 19.5 9.5 6 4.5 7 3
KH070100 M7×1 P3 2.5P 3 78 13 10 6.2 5 8 3
KH080125 M8×1.25 P4 2.5P 5 70 22 15 6.2 5 8 3
KH080100 M8×1 P4 2.5P 5 70 22 15 6.2 5 8 3
KH100150 M10×1.5 P5 2.5P 5 75 24 19 7 5.5 8 4
KH100125 M10×1.25 P4 2.5P 5 75 24 19 7 5.5 8 4
KH100100 M10×1 P4 2.5P 5 75 24 19 7 5.5 8 4
KH120175 M12×1.75 P5 2.5P 5 82 29 17 8.5 6.5 9 4
KH120150 M12×1.5 P5 2.5P 5 82 29 17 8.5 6.5 9 4
KH120125 M12×1.25 P5 2.5P 5 82 29 17 8.5 6.5 9 4
KH120100 M12×1 P4 2.5P 5 82 29 17 8.5 6.5 9 4
KH140200 M14×2 P6 2.5P 5 88 20 31 10.5 8 11 4
KH140150 M14×1.5 P5 2.5P 5 88 20 31 10.5 8 11 4
KH140125 M14×1.25 P5 2.5P 5 88 20 31 10.5 8 11 4
KH140100 M14×1 P4 2.5P 5 88 20 31 10.5 8 11 4
KH160200 M16×2 P6 2.5P 5 90 20 32 12.5 10 13 4
KH160150 M16×1.5 P5 2.5P 5 90 20 32 12.5 10 13 4
KH160125 M16×1.25 P5 2.5P 5 90 20 32 12.5 10 13 4
KH160100 M16×1 P4 2.5P 5 90 20 32 12.5 10 13 4
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

4 NINGBO NICHE TOOLS CO. LTD

STRAIGHT FLUTED TAPS FOR CAST IRON

Type:11 K

Lc

d
OH-HT fl Ln
L
Lk

HT Straight fluted taps with internal coolant Lc

Type:12 K

◎ High-speed steel material;

d
◎ YC-T50 coating, excellent wear resistance. fl Ln Lk
◎ Taps with internal coolant are suitable for deep hole threading. L
Coolant oil can cool down and lubricate the cutting edge, provide
higher threading speed and thread tolerance.
◎Suitable for gray cast iron, ductile cast iron mass continuous
processing threading, high processing accuracy

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type Flutes
L fI In d k Lk
KH050080C M5×0.8 P3 2.5P 11 61 16 9 5.5 4.5 7 C 3
KH050080Z M5×0.8 P3 2.5P 11 61 16 9 5.5 4.5 7 Z 3
KH060100C M6×1 P3 2.5P 11 63 19.5 9.5 6 4.5 7 C 3
KH060100Z M6×1 P3 2.5P 11 63 19.5 9.5 6 4.5 7 Z 3
KH070100C M7×1 P3 2.5P 11 72 13 10 6.2 5 8 C 3
KH070100Z M7×1 P3 2.5P 11 72 13 10 6.2 5 8 Z 3
KH080125C M8×1.25 P4 2.5P 12 70 22 15 6.2 5 8 C 3
KH080125Z M8×1.25 P4 2.5P 12 70 22 15 6.2 5 8 Z 3
KH080100C M8×1 P4 2.5P 12 70 22 15 6.2 5 8 C 3
KH080100Z M8×1 P4 2.5P 12 70 22 15 6.2 5 8 Z 3
KH100150C M10×1.5 P5 2.5P 12 75 24 19 7 5.5 8 C 4
KH100150Z M10×1.5 P5 2.5P 12 75 24 19 7 5.5 8 Z 4
KH100125C M10×1.25 P4 2.5P 12 75 24 19 7 5.5 8 C 4
KH100125Z M10×1.25 P4 2.5P 12 75 24 19 7 5.5 8 Z 4
KH100100C M10×1 P4 2.5P 12 75 24 19 7 5.5 8 C 4
KH100100Z M10×1 P4 2.5P 12 75 24 19 7 5.5 8 Z 4
KH120175C M12×1.75 P5 2.5P 12 82 29 17 8.5 6.5 9 C 4
KH120175Z M12×1.75 P5 2.5P 12 82 29 17 8.5 6.5 9 Z 4
KH120150C M12×1.5 P5 2.5P 12 82 29 17 8.5 6.5 9 C 4
KH120150Z M12×1.5 P5 2.5P 12 82 29 17 8.5 6.5 9 Z 4
KH120125C M12×1.25 P5 2.5P 12 82 29 17 8.5 6.5 9 C 4
KH120125Z M12×1.25 P5 2.5P 12 82 29 17 8.5 6.5 9 Z 4
KH120100C M12×1 P4 2.5P 12 82 29 17 8.5 6.5 9 C 4
KH120100Z M12×1 P4 2.5P 12 82 29 17 8.5 6.5 9 Z 4
KH140200C M14×2 P6 2.5P 12 88 20 31 10.5 8 11 C 4
KH140200Z M14×2 P6 2.5P 12 88 20 31 10.5 8 11 Z 4
KH140150C M14×1.5 P5 2.5P 12 88 20 31 10.5 8 11 C 4
KH140150Z M14×1.5 P5 2.5P 12 88 20 31 10.5 8 11 Z 4
KH140125C M14×1.25 P5 2.5P 12 88 20 31 10.5 8 11 C 4
KH140125Z M14×1.25 P5 2.5P 12 88 20 31 10.5 8 11 Z 4
KH140100C M14×1 P4 2.5P 12 88 20 31 10.5 8 11 C 4
KH140100Z M14×1 P4 2.5P 12 88 20 31 10.5 8 11 Z 4
KH160200C M16×2 P6 2.5P 12 95 20 32 12.5 10 13 C 4
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

[Link] 144
 STRAIGHT FLUTED TAPS FOR CAST IRON

Type:12

OH-HT Lc
K

HT Straight fluted taps with internal coolant

d
fl Ln Lk
L
◎ High-speed steel material;
◎ YC-T50 coating, excellent wear resistance.
◎ Taps with internal coolant are suitable for deep hole threading.
Coolant oil can cool down and lubricate the cutting edge, provide
higher threading speed and thread tolerance.
◎Suitable for gray cast iron, ductile cast iron mass continuous
processing threading, high processing accuracy

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC TypeType type Flutes
L LfI In fI d In k dLk k Lk
KH160200Z M16×2 P6 2.5P 12 95 20 32 12.5 10 13 Z 4
KH160150C M16×1.5 P5 2.5P 12 95 20 32 12.5 10 13 C 4
KH160150Z M16×1.5 P5 2.5P 12 95 20 32 12.5 10 13 Z 4
KH160125C M16×1.25 P5 2.5P 12 95 20 32 12.5 10 13 C 4
KH160125Z M16×1.25 P5 2.5P 12 95 20 32 12.5 10 13 Z 4
KH160100C M16×1 P4 2.5P 12 95 20 32 12.5 10 13 C 4
KH160100Z M16×1 P4 2.5P 12 95 20 32 12.5 10 13 Z 4
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

145 NINGBO NICHE TOOLS CO. LTD

STRAIGHT FLUTED TAPS FOR CAST IRON

X20-HT Lc
Type:13 K Type:5

d
HT Straight fluted taps fl Ln
L
Lk

◎ High-speed steel material;

◎ YC-T50 coating, excellent wear resistance.
◎ Suitable for gray cast iron, ductile cast iron mass continuous
processing threading, high processing accuracy

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
X20H05080 M5×0.8 6HX 3P 13 70 10 15 6 4.9 8 3
X20H06100 M6×1 6HX 3P 13 80 10 20 6 4.9 8 3
X20H07100 M7×1 6HX 3P 13 80 10 20 7 5.5 8 3
X20H08125 M8×1.25 6HX 3P 5 90 13 22 8 6.2 9 4
X20H08100 M8×1 6HX 3P 5 90 13 22 8 6.2 9 4
X20H10150 M10×1.5 6HX 3P 5 100 15 24 10 8 11 4
X20H10125 M10×1.25 6HX 3P 5 100 15 24 10 8 11 4
X20H10100 M10×1 6HX 3P 5 100 15 24 10 8 11 4
X20H12175 M12×1.75 6HX 3P 5 110 17 32 9 7 10 4
X20H12150 M12×1.5 6HX 3P 5 110 17 32 9 7 10 4
X20H12125 M12×1.25 6HX 3P 5 110 17 32 9 7 10 4
X20H12100 M12×1 6HX 3P 5 110 17 32 9 7 10 4
X20H14200 M14×2 6HX 3P 5 110 20 33 11 9 12 4
X20H14150 M14×1.5 6HX 3P 5 110 20 33 11 9 12 4
X20H14125 M14×1.25 6HX 3P 5 110 20 33 11 9 12 4
X20H14100 M14×1 6HX 3P 5 110 20 33 11 9 12 4
X20H16200 M16×2 6HX 3P 5 110 20 34 12 9 12 4
X20H16150 M16×1.5 6HX 3P 5 110 20 34 12 9 12 .4
X20H16125 M16×1.25 6HX 3P 5 110 20 34 12 9 12 4
X20H16100 M16×1 6HX 3P 5 110 20 34 12 9 12 4
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

[Link] 146
 STRAIGHT FLUTED TAPS FOR CAST IRON
Type:11 K

Lc

d
X21-HT fl Ln
L
Lk

HT Straight fluted taps with internal coolant Lc

Type:12 K

◎ High-speed steel material;

d
◎ YC-T50 coating, excellent wear resistance. fl Ln Lk

◎ Taps with internal coolant are suitable for deep hole threading. Coolant oil can cool down L

and lubricate the cutting edge, provide higher threading speed and thread tolerance.
◎Suitable for gray cast iron, ductile cast iron mass continuous processing threading, high
processing accuracy

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type Flutes
L fI In d k Lk
X21H0508C M5×0.8 6HX 3P 11 70 10 15 6 4.9 8 C 3
X21H0508Z M5×0.8 6HX 3P 11 70 10 15 6 4.9 8 Z 3
X21H0610C M6×1 6HX 3P 11 80 10 20 6 4.9 8 C 3
X21H0610Z M6×1 6HX 3P 11 80 10 20 6 4.9 8 Z 3
X21H0710C M7×1 6HX 3P 11 80 10 20 7 5.5 8 C 3
X21H0710Z M7×1 6HX 3P 11 80 10 20 7 5.5 8 Z 3
X21H08125C M8×1.25 6HX 3P 12 90 13 22 8 6.2 9 C 4
X21H08125Z M8×1.25 6HX 3P 12 90 13 22 8 6.2 9 Z 4
X21H0810C M8×1 6HX 3P 12 90 13 22 8 6.2 9 C 4
X21H0810Z M8×1 6HX 3P 12 90 13 22 8 6.2 9 Z 4
X21H1015C M10×1.5 6HX 3P 12 100 15 24 10 8 11 C 4
X21H1015Z M10×1.5 6HX 3P 12 100 15 24 10 8 11 Z 4
X21H10125C M10×1.25 6HX 3P 12 100 15 24 10 8 11 C 4
X21H10125Z M10×1.25 6HX 3P 12 100 15 24 10 8 11 Z 4
X21H1010C M10×1 6HX 3P 12 100 15 24 10 8 11 C 4
X21H1010Z M10×1 6HX 3P 12 100 15 24 10 8 11 Z 4
X21H12175C M12×1.75 6HX 3P 12 110 17 32 9 7 10 C 4
X21H12175Z M12×1.75 6HX 3P 12 110 17 32 9 7 10 Z 4
X21H1215C M12×1.5 6HX 3P 12 110 17 32 9 7 10 C 4
X21H1215Z M12×1.5 6HX 3P 12 110 17 32 9 7 10 Z 4
X21H12125C M12×1.25 6HX 3P 12 110 17 32 9 7 10 C 4
X21H12125Z M12×1.25 6HX 3P 12 110 17 32 9 7 10 Z 4
X21H1210C M12×1 6HX 3P 12 110 17 32 9 7 10 C 4
X21H1210Z M12×1 6HX 3P 12 110 17 32 9 7 10 Z 4
X21H1420C M14×2 6HX 3P 12 110 20 33 11 9 12 C 4
X21H1420Z M14×2 6HX 3P 12 110 20 33 11 9 12 Z 4
X21H1415C M14×1.5 6HX 3P 12 110 20 33 11 9 12 C 4
X21H1415Z M14×1.5 6HX 3P 12 110 20 33 11 9 12 Z 4
X21H14125C M14×1.25 6HX 3P 12 110 20 33 11 9 12 C 4
X21H14125Z M14×1.25 6HX 3P 12 110 20 33 11 9 12 Z 4
X21H1410C M14×1 6HX 3P 12 110 20 33 11 9 12 C 4
X21H1410Z M14×1 6HX 3P 12 110 20 33 11 9 12 Z 4
X21H1620C M16×2 6HX 3P 12 110 20 34 12 9 12 C 4
X21H1620Z M16×2 6HX 3P 12 110 20 34 12 9 12 Z 4

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

147 NINGBO NICHE TOOLS CO. LTD

STRAIGHT FLUTED TAPS FOR CAST IRON

X21-HT
Type:12
K
Lc

HT Straight fluted taps with internal coolant

d
fl Ln Lk
2P chamfers,for blind hole L
4P chamfers,for through hole

◎ High-speed steel material;

◎ YC-T50 coating, excellent wear resistance.
◎ Taps with internal coolant are suitable for deep hole threading. Coolant
oil can cool down and lubricate the cutting edge, provide higher threading
speed and thread tolerance.
◎Suitable for gray cast iron, ductile cast iron mass continuous processing
threading, high processing accuracy

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type Flutes
L fI In d k Lk
X21H1615C M16×1.5 6HX 3P 12 110 20 34 12 9 12 C 4
X21H1615Z M16×1.5 6HX 3P 12 110 20 34 12 9 12 Z 4
X21H16125C M16×1.25 6HX 3P 12 110 20 34 12 9 12 C 4
X21H16125Z M16×1.25 6HX 3P 12 110 20 34 12 9 12 Z 4
X21H1610C M16×1 6HX 3P 12 110 20 34 12 9 12 C 4
X21H1610Z M16×1 6HX 3P 12 110 20 34 12 9 12 Z 4
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

[Link] 148
149 NINGBO NICHE TOOLS CO. LTD
 INDEX
TAPS FOR CAST IRON

SOLID CARBIDE FORMING TAPS ......................................................................................151

SOLID CARBIDE FORMING TAPS WITH INTERAL COOLANT ........................................154
SOLID CARBIDE FORMING TAPS WITH LONG SHANK ..................................................156
SOLID CARBIDE FORMING TAPS WITH LONG SHANK&INTERNAL COOLANT.........159
SOLID CARBIDE FORMING TAPS.....................................................................................162
SOLID CARBIDE FORMING TAPS WITH INTERNAL COOLANT.................................165
SOLID CARBIDE SPIRAL FLUTED TAPS ............................................................................168
SOLID CARBIDE SPIRAL FLUTED TAPS WITH INTERAL COOLANT ..............................169
SOLID CARBIDE STRAIGHT FLUTED TAPS.....................................................................171
SOLID CARBIDE STRAIGHT FLUTED TAPS WITH INTERNAL COOLANT......................172
SOLID CARBIDE STRAIGHT FLUTED TAPS ....................................................................173
SOLID CARBIDE STRAIGHT FLUTED TAPS WITH INTERNAL COOLANT......................174

[Link] 150
 TAPS FOR CAST IRON

Type:1 Type:5

CB-NRT
L
Solid carbide forming taps
Type:2 Type:6
2P chamfers,for blind hole
4P chamfers,for through hole
L

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, ISO
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.
CARBIDE M 6H
JIS

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WN010025P M1×0.25 RH4 4P 1 38 4.5 - 3 2.5 3 -
WN010025B M1×0.25 RH4 2P 2 37 3.5 - 3 2.5 3 -
WN012025P M1.2×0.25 RH4 4P 1 38 4.5 - 3 2.5 3 -
WN012025B M1.2×0.25 RH4 2P 2 37 3.5 - 3 2.5 3 -
WN014030P M1.4×0.3 RH4 4P 1 38 6.5 - 3 2.5 3 -
WN014030B M1.4×0.3 RH4 2P 2 37 6.5 - 3 2.5 3 -
WN016035P M1.6×0.35 RH5 4P 1 38 8 - 3 2.5 3 -
WN016035B M1.6×0.35 RH5 2P 2 36.5 8 - 3 2.5 3 -
WN020040P M2×0.4 RH5 4P 1 49 10 - 3 2.5 3 -
WN020040B M2×0.4 RH5 2P 2 47.5 10 - 3 2.5 3 -
WN025045P M2.5×0.45 RH5 4P 1 49 13 - 3 2.5 3 -
WN025045B M2.5×0.45 RH5 2P 2 47.5 13 - 3 2.5 3 -
WN030050P M3×0.5 RH6 4P 1 50 16 - 4 3.2 6 -
WN030050B M3×0.5 RH6 2P 2 48 16 - 4 3.2 6 -
WN040070P M4×0.7 RH7 4P 1 54 18 - 5 4 7 -

4 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

Type:1 Type:5

CB-NRT
L
Solid carbide forming taps
Type:2 Type:6
2P chamfers,for blind hole
4P chamfers,for through hole
L

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, CARBIDE M ISO JIS
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy. 6H

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WN040070B M4×0.7 RH7 2P 2 52 18 - 5 4 7 -
WN050080P M5×0.8 RH7 4P 1 62 20 - 5.5 4.5 7 -
WN050080B M5×0.8 RH7 2P 2 59.5 20 - 5.5 4.5 7 -
WN060100P M6×1 RH7 4P 5 62 19 10 6 4.5 7 2
WN060100B M6×1 RH7 2P 5 62 19 10 6 4.5 7 2
WN080125P M8×1.25 RH7 4P 6 75 13 - 6.2 5 8 3
WN080125B M8×1.25 RH7 2P 6 75 13 - 6.2 5 8 3
WN080100P M8×1 RH7 4P 6 75 13 - 6.2 5 8 3
WN080100B M8×1 RH7 2P 6 75 13 - 6.2 5 8 3
WN100150P M10×1.5 RH8 4P 6 75 15 - 7 5.5 8 6
WN100150B M10×1.5 RH8 2P 6 75 15 - 7 5.5 8 6
WN100125P M10×1.25 RH7 4P 6 75 15 - 7 5.5 8 6
WN100125B M10×1.25 RH7 2P 6 75 15 - 7 5.5 8 6
WN100100P M10×1 RH7 4P 6 75 15 - 7 5.5 8 6
WN100100B M10×1 RH7 2P 6 75 15 - 7 5.5 8 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 152
 TAPS FOR CAST IRON

CB-NRT Type:6

Solid carbide forming taps

2P chamfers,for blind hole
4P chamfers,for through hole

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, CARBIDE M ISO JIS
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy. 6H

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WN120175P M12×1.75 RH9 4P 6 82 17 - 8.5 6.5 9 6
WN120175B M12×1.75 RH9 2P 6 82 17 - 8.5 6.5 9 6
WN120150P M12×1.5 RH8 4P 6 82 17 - 8.5 6.5 9 6
WN120150B M12×1.5 RH8 2P 6 82 17 - 8.5 6.5 9 6
WN120125P M12×1.25 RH7 4P 6 82 17 - 8.5 6.5 9 6
WN120125B M12×1.25 RH7 2P 6 82 17 - 8.5 6.5 9 6
WN120100P M12×1 RH7 4P 6 82 17 - 8.5 6.5 9 6
WN120100B M12×1 RH7 2P 6 82 17 - 8.5 6.5 9 6
WN140200P M14×2 RH10 4P 6 100 20 - 10.5 8 11 6
WN140200B M14×2 RH10 2P 6 100 20 - 10.5 8 11 6
WN140150P M14×1.5 RH8 4P 6 100 20 - 10.5 8 11 6
WN140150B M14×1.5 RH8 2P 6 100 20 - 10.5 8 11 6
WN140125P M14×1.25 RH7 4P 6 100 20 - 10.5 8 11 6
WN140125B M14×1.25 RH7 2P 6 100 20 - 10.5 8 11 6
WN140100P M14×1 RH7 4P 6 100 20 - 10.5 8 11 6
WN140100B M14×1 RH7 2P 6 100 20 - 10.5 8 11 6
WN160200P M16×2 RH10 4P 6 100 20 - 12.5 10 13 6
WN160200B M16×2 RH10 2P 6 100 20 - 12.5 10 13 6
WN160150P M16×1.5 RH8 4P 6 100 20 - 12.5 10 13 6
WN160150B M16×1.5 RH8 2P 6 100 20 - 12.5 10 13 6
WN160125P M16×1.25 RH7 4P 6 100 20 - 12.5 10 13 6
WN160125B M16×1.25 RH7 2P 6 100 20 - 12.5 10 13 6
WN160100P M16×1 RH7 4P 6 100 20 - 12.5 10 13 6
WN160100B M16×1 RH7 2P 6 100 20 - 12.5 10 13 6
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

153 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

Type:12
K
Lc

CB-OH-NRT

d
fl Ln Lk

Solid carbide forming taps with internal coolant L

K
Lc
Type:16

2P chamfers,for blind hole

d
4P chamfers,for through hole fl Lk

L
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WN060100C M6×1 RH7 4P 12 62 19 10 6 4.5 7 C 2
WN060100Z M6×1 RH7 2P 12 62 19 10 6 4.5 7 Z 2
WN080125C M8×1.25 RH7 4P 16 75 13 - 6.2 5 8 C 3
WN080125Z M8×1.25 RH7 2P 16 75 13 - 6.2 5 8 Z 3
WN080100C M8×1 RH7 4P 16 75 13 - 6.2 5 8 C 3
WN080100Z M8×1 RH7 2P 16 75 13 - 6.2 5 8 Z 3
WN100150C M10×1.5 RH8 4P 16 75 15 - 7 5.5 8 C 6
WN100150Z M10×1.5 RH8 2P 16 75 15 - 7 5.5 8 Z 6
WN100125C M10×1.25 RH7 4P 16 75 15 - 7 5.5 8 C 6
WN100125Z M10×1.25 RH7 2P 16 75 15 - 7 5.5 8 Z 6
WN100100C M10×1 RH7 4P 16 75 15 - 7 5.5 8 C 6
WN100100Z M10×1 RH7 2P 16 75 15 - 7 5.5 8 Z 6
WN120175C M12×1.75 RH9 4P 16 82 17 - 8.5 6.5 9 C 6
WN120175Z M12×1.75 RH9 2P 16 82 17 - 8.5 6.5 9 Z 6
WN120150C M12×1.5 RH8 4P 16 82 17 - 8.5 6.5 9 C 6
WN120150Z M12×1.5 RH8 2P 16 82 17 - 8.5 6.5 9 Z 6
WN120125C M12×1.25 RH7 4P 16 82 17 - 8.5 6.5 9 C 6
WN120125Z M12×1.25 RH7 2P 16 82 17 - 8.5 6.5 9 Z 6
WN120100C M12×1 RH7 4P 16 82 17 - 8.5 6.5 9 C 6
WN120100Z M12×1 RH7 2P 16 82 17 - 8.5 6.5 9 Z 6
WN140200C M14×2 RH10 4P 16 100 20 - 10.5 8 11 C 6
WN140200Z M14×2 RH10 2P 16 100 20 - 10.5 8 11 Z 6
WN140150C M14×1.5 RH8 4P 16 100 20 - 10.5 8 11 C 6
WN140150Z M14×1.5 RH8 2P 16 100 20 - 10.5 8 11 Z 6
WN140125C M14×1.25 RH7 4P 16 100 20 - 10.5 8 11 C 6
WN140125Z M14×1.25 RH7 2P 16 100 20 - 10.5 8 11 Z 6
WN140100C M14×1 RH7 4P 16 100 20 - 10.5 8 11 C 6
WN140100Z M14×1 RH7 2P 16 100 20 - 10.5 8 11 Z 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 154
 TAPS FOR CAST IRON

CB-OH-NRT Lc
Type:16 K

Solid carbide forming taps with internal coolant

d
fl Lk

L
2P chamfers,for blind hole
4P chamfers,for through hole
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC TypeType type Flutes
L LfI In fI d In k dLk k Lk
WN160200C M16×2 RH10 4P 16 100 20 - 12.5 10 13 C 6
WN160200Z M16×2 RH10 2P 16 100 20 - 12.5 10 13 Z 6
WN160150C M16×1.5 RH8 4P 16 100 20 - 12.5 10 13 C 6
WN160150Z M16×1.5 RH8 2P 16 100 20 - 12.5 10 13 Z 6
WN160125C M16×1.25 RH7 4P 16 100 20 - 12.5 10 13 C 6
WN160125Z M16×1.25 RH7 2P 16 100 20 - 12.5 10 13 Z 6
WN160100C M16×1 RH7 4P 16 100 20 - 12.5 10 13 C 6
WN160100Z M16×1 RH7 2P 16 100 20 - 12.5 10 13 Z 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

155 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

CB-L-NRT
Solid carbide forming taps with long shank
2P chamfers,for blind hole
4P chamfers,for through hole
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WN020480P M2×0.4 RH5 4P 1 80 10 - 3 2.5 3 -
WN020480B M2×0.4 RH5 2P 2 78 10 - 3 2.5 3 -
WN0204100P M2×0.4 RH5 4P 1 100 10 - 3 2.5 3 -
WN0204100B M2×0.4 RH5 2P 2 98 10 - 3 2.5 3 -
WN0204120P M2×0.4 RH5 4P 1 120 10 - 3 2.5 3 -
WN0204120B M2×0.4 RH5 2P 2 118 10 - 3 2.5 3 -
WN02504580P M2.5×0.45 RH5 4P 1 80 13 - 3 2.5 3 -
WN02504580B M2.5×0.45 RH5 2P 2 78 13 - 3 2.5 3 -
WN025045100P M2.5×0.45 RH5 4P 1 100 13 - 3 2.5 3 -
WN025045100B M2.5×0.45 RH5 2P 2 98 13 - 3 2.5 3 -
WN025045120P M2.5×0.45 RH5 4P 1 120 13 - 3 2.5 3 -
WN025045120B M2.5×0.45 RH5 2P 2 118 13 - 3 2.5 3 -
WN030580P M3×0.5 RH6 4P 1 80 16 - 4 3.2 6 -
WN030580B M3×0.5 RH6 2P 2 78 16 - 4 3.2 6 -
WN0305100P M3×0.5 RH6 4P 1 100 16 - 4 3.2 6 -
WN0305100B M3×0.5 RH6 2P 2 98 16 - 4 3.2 6 -
WN0305120P M3×0.5 RH6 4P 1 120 16 - 4 3.2 6 -
WN0305120B M3×0.5 RH6 2P 2 118 16 - 4 3.2 6 -
WN0305150P M3×0.5 RH6 4P 1 150 16 - 4 3.2 6 -
WN0305150B M3×0.5 RH6 2P 2 148 16 - 4 3.2 6 -
WN040780P M4×0.7 RH7 4P 1 80 18 - 5 4 7 -
WN040780B M4×0.7 RH7 2P 2 78 18 - 5 4 7 -
WN0407100P M4×0.7 RH7 4P 1 100 18 - 5 4 7 -
WN0407100B M4×0.7 RH7 2P 2 98 18 - 5 4 7 -
WN0407120P M4×0.7 RH7 4P 1 120 18 - 5 4 7 -
WN0407120B M4×0.7 RH7 2P 2 118 18 - 5 4 7 -
WN0407150P M4×0.7 RH7 4P 1 150 18 - 5 4 7 -
WN0407150B M4×0.7 RH7 2P 2 148 18 - 5 4 7 -
WN050880P M5×0.8 RH7 4P 1 80 20 - 5.5 4.5 7 -
WN050880B M5×0.8 RH7 2P 2 78 20 - 5.5 4.5 7 -
WN0508100P M5×0.8 RH7 4P 1 100 20 - 5.5 4.5 7 -
WN0508100B M5×0.8 RH7 2P 2 98 20 - 5.5 4.5 7 -
WN0508120P M5×0.8 RH7 4P 1 120 20 - 5.5 4.5 7 -
WN0508120B M5×0.8 RH7 2P 2 118 20 - 5.5 4.5 7 -
WN0508150P M5×0.8 RH7 4P 1 150 20 - 5.5 4.5 7 -
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 156
 TAPS FOR CAST IRON

Type:5

CB-L-NRT
Solid carbide forming taps with long shank Type:6

2P chamfers,for blind hole

4P chamfers,for through hole
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium CARBIDE M ISO JIS
6H
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WN061080B M6×1 RH7 2P 5 80 19 10 6 4.5 7 2
WN0610100B M6×1 RH7 2P 5 100 19 10 6 4.5 7 2
WN0610120B M6×1 RH7 2P 5 120 19 10 6 4.5 7 2
WN0610150B M6×1 RH7 2P 5 150 19 10 6 4.5 7 2
WN08125100B M8×1.25 RH7 2P 6 100 13 - 6.2 5 8 3
WN08125120B M8×1.25 RH7 2P 6 120 13 - 6.2 5 8 3
WN08125150B M8×1.25 RH7 2P 6 150 13 - 6.2 5 8 3
WN0810100B M8×1 RH7 2P 6 100 13 - 6.2 5 8 3
WN0810120B M8×1 RH7 2P 6 120 13 - 6.2 5 8 3
WN0810150B M8×1 RH7 2P 6 150 13 - 6.2 5 8 3
WN1015100B M10×1.5 RH8 2P 6 100 15 - 7 5.5 8 6
WN1015120B M10×1.5 RH8 2P 6 120 15 - 7 5.5 8 6
WN1015150B M10×1.5 RH8 2P 6 150 15 - 7 5.5 8 6
WN10125100B M10×1.25 RH7 2P 6 100 15 - 7 5.5 8 6
WN10125120B M10×1.25 RH7 2P 6 120 15 - 7 5.5 8 6
WN10125150B M10×1.25 RH7 2P 6 150 15 - 7 5.5 8 6
WN1010100B M10×1 RH7 2P 6 100 15 - 7 5.5 8 6
WN1010120B M10×1 RH7 2P 6 120 15 - 7 5.5 8 6
WN1010150B M10×1 RH7 2P 6 150 15 - 7 5.5 8 6
WN12175100B M12×1.75 RH9 2P 6 100 17 - 8.5 6.5 9 6
WN12175120B M12×1.75 RH9 2P 6 120 17 - 8.5 6.5 9 6
WN12175150B M12×1.75 RH9 2P 6 150 17 - 8.5 6.5 9 6
WN1215100B M12×1.5 RH8 2P 6 100 17 - 8.5 6.5 9 6
WN1215120B M12×1.5 RH8 2P 6 120 17 - 8.5 6.5 9 6
WN1215150B M12×1.5 RH8 2P 6 150 17 - 8.5 6.5 9 6
WN12125100B M12×1.25 RH7 2P 6 100 17 - 8.5 6.5 9 6
WN12125120B M12×1.25 RH7 2P 6 120 17 - 8.5 6.5 9 6
WN12125150B M12×1.25 RH7 2P 6 150 17 - 8.5 6.5 9 6
WN1210100B M12×1 RH7 2P 6 100 17 - 8.5 6.5 9 6
WN1210120B M12×1 RH7 2P 6 120 17 - 8.5 6.5 9 6
WN1210150B M12×1 RH7 2P 6 150 17 - 8.5 6.5 9 6
WN1420120B M14×2 RH10 2P 6 120 20 - 10.5 8 11 6
WN1420150B M14×2 RH10 2P 6 150 20 - 10.5 8 11 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

157 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

CB-L-NRT Type:6

Solid carbide forming taps with long shank

2P chamfers,for blind hole
4P chamfers,for through hole

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium CARBIDE M ISO JIS
6H
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WN1415120B M14×1.5 RH8 2P 6 120 20 - 10.5 8 11 6
WN1415150B M14×1.5 RH8 2P 6 150 20 - 10.5 8 11 6
WN14125120B M14×1.25 RH7 2P 6 120 20 - 10.5 8 11 6
WN14125150B M14×1.25 RH7 2P 6 150 20 - 10.5 8 11 6
WN1410120B M14×1 RH7 2P 6 120 20 - 10.5 8 11 6
WN1410150B M14×1 RH7 2P 6 150 20 - 10.5 8 11 6
WN1620120B M16×2 RH10 2P 6 120 20 - 12.5 10 13 6
WN1620150B M16×2 RH10 2P 6 150 20 - 12.5 10 13 6
WN1615120B M16×1.5 RH8 2P 6 120 20 - 12.5 10 13 6
WN1615150B M16×1.5 RH8 2P 6 150 20 - 12.5 10 13 6
WN16125120B M16×1.25 RH7 2P 6 120 20 - 12.5 10 13 6
WN16125150B M16×1.25 RH7 2P 6 150 20 - 12.5 10 13 6
WN1610120B M16×1 RH7 2P 6 120 20 - 12.5 10 13 6
WN1610150B M16×1 RH7 2P 6 150 20 - 12.5 10 13 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 158
 TAPS FOR CAST IRON

Type:12

CB-L-OH-NRT Lc
K

Solid carbide forming taps with long shank

d
fl Ln Lk
&internal coolant L

K
Lc
Type:16
2P chamfers,for blind hole
4P chamfers,for through hole

d
fl Lk

L
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WN061080C M6×1 RH7 4P 12 80 19 10 6 4.5 7 C 2
WN061080Z M6×1 RH7 2P 12 80 19 10 6 4.5 7 Z 2
WN0610100C M6×1 RH7 4P 12 100 19 10 6 4.5 7 C 2
WN0610100Z M6×1 RH7 2P 12 100 19 10 6 4.5 7 Z 2
WN0610120C M6×1 RH7 4P 12 120 19 10 6 4.5 7 C 2
WN0610120Z M6×1 RH7 2P 12 120 19 10 6 4.5 7 Z 2
WN0610150C M6×1 RH7 4P 12 150 19 10 6 4.5 7 C 2
WN0610150Z M6×1 RH7 2P 12 150 19 10 6 4.5 7 Z 2
WN08125100C M8×1.25 RH7 4P 16 100 13 - 6.2 5 8 C 3
WN08125100Z M8×1.25 RH7 2P 16 100 13 - 6.2 5 8 Z 3
WN08125120C M8×1.25 RH7 4P 16 120 13 - 6.2 5 8 C 3
WN08125120Z M8×1.25 RH7 2P 16 120 13 - 6.2 5 8 Z 3
WN08125150C M8×1.25 RH7 4P 16 150 13 - 6.2 5 8 C 3
WN08125150Z M8×1.25 RH7 2P 16 150 13 - 6.2 5 8 Z 3
WN0810100C M8×1 RH7 4P 16 100 13 - 6.2 5 8 C 3
WN0810100Z M8×1 RH7 2P 16 100 13 - 6.2 5 8 Z 3
WN0810120C M8×1 RH7 4P 16 120 13 - 6.2 5 8 C 3
WN0810120Z M8×1 RH7 2P 16 120 13 - 6.2 5 8 Z 3
WN0810150C M8×1 RH7 4P 16 150 13 - 6.2 5 8 C 3
WN0810150Z M8×1 RH7 2P 16 150 13 - 6.2 5 8 Z 3
WN1015100C M10×1.5 RH8 4P 16 100 15 - 7 5.5 8 C 6
WN1015100Z M10×1.5 RH8 2P 16 100 15 - 7 5.5 8 Z 6
WN1015120C M10×1.5 RH8 4P 16 120 15 - 7 5.5 8 C 6
WN1015120Z M10×1.5 RH8 2P 16 120 15 - 7 5.5 8 Z 6
WN1015150C M10×1.5 RH8 4P 16 150 15 - 7 5.5 8 C 6
WN1015150Z M10×1.5 RH8 2P 16 150 15 - 7 5.5 8 Z 6
WN10125100C M10×1.25 RH7 4P 16 100 15 - 7 5.5 8 C 6
WN10125100Z M10×1.25 RH7 2P 16 100 15 - 7 5.5 8 Z 6
WN10125120C M10×1.25 RH7 4P 16 120 15 - 7 5.5 8 C 6
WN10125120Z M10×1.25 RH7 2P 16 120 15 - 7 5.5 8 Z 6
WN10125150C M10×1.25 RH7 4P 16 150 15 - 7 5.5 8 C 6
WN10125150Z M10×1.25 RH7 2P 16 150 15 - 7 5.5 8 Z 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

159 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

CB-L-OH-NRT K
Lc
Type:16
Solid carbide forming taps with long shank
&internal coolant

d
fl Lk

2P chamfers,for blind hole L

4P chamfers,for through hole

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WN1010100C M10×1 RH7 4P 16 100 15 - 7 5.5 8 C 6
WN1010100Z M10×1 RH7 2P 16 100 15 - 7 5.5 8 Z 6
WN1010120C M10×1 RH7 4P 16 120 15 - 7 5.5 8 C 6
WN1010120Z M10×1 RH7 2P 16 120 15 - 7 5.5 8 Z 6
WN1010150C M10×1 RH7 4P 16 150 15 - 7 5.5 8 C 6
WN1010150Z M10×1 RH7 2P 16 150 15 - 7 5.5 8 Z 6
WN12175100C M12×1.75 RH9 4P 16 100 17 - 8.5 6.5 9 C 6
WN12175100Z M12×1.75 RH9 2P 16 100 17 - 8.5 6.5 9 Z 6
WN12175120C M12×1.75 RH9 4P 16 120 17 - 8.5 6.5 9 C 6
WN12175120Z M12×1.75 RH9 2P 16 120 17 - 8.5 6.5 9 Z 6
WN12175150C M12×1.75 RH9 4P 16 150 17 - 8.5 6.5 9 C 6
WN12175150Z M12×1.75 RH9 2P 16 150 17 - 8.5 6.5 9 Z 6
WN1215100C M12×1.5 RH8 4P 16 100 17 - 8.5 6.5 9 C 6
WN1215100Z M12×1.5 RH8 2P 16 100 17 - 8.5 6.5 9 Z 6
WN1215120C M12×1.5 RH8 4P 16 120 17 - 8.5 6.5 9 C 6
WN1215120Z M12×1.5 RH8 2P 16 120 17 - 8.5 6.5 9 Z 6
WN1215150C M12×1.5 RH8 4P 16 150 17 - 8.5 6.5 9 C 6
WN1215150Z M12×1.5 RH8 2P 16 150 17 - 8.5 6.5 9 Z 6
WN12125100C M12×1.25 RH7 4P 16 100 17 - 8.5 6.5 9 C 6
WN12125100Z M12×1.25 RH7 2P 16 100 17 - 8.5 6.5 9 Z 6
WN12125120C M12×1.25 RH7 4P 16 120 17 - 8.5 6.5 9 C 6
WN12125120Z M12×1.25 RH7 2P 16 120 17 - 8.5 6.5 9 Z 6
WN12125150C M12×1.25 RH7 4P 16 150 17 - 8.5 6.5 9 C 6
WN12125150Z M12×1.25 RH7 2P 16 150 17 - 8.5 6.5 9 Z 6
WN1210100C M12×1 RH7 4P 16 100 17 - 8.5 6.5 9 C 6
WN1210100Z M12×1 RH7 2P 16 100 17 - 8.5 6.5 9 Z 6
WN1210120C M12×1 RH7 4P 16 120 17 - 8.5 6.5 9 C 6
WN1210120Z M12×1 RH7 2P 16 120 17 - 8.5 6.5 9 Z 6
WN1210150C M12×1 RH7 4P 16 150 17 - 8.5 6.5 9 C 6
WN1210150Z M12×1 RH7 2P 16 150 17 - 8.5 6.5 9 Z 6
WN1420120C M14×2 RH10 4P 16 120 20 - 10.5 8 11 C 6
WN1420120Z M14×2 RH10 2P 16 120 20 - 10.5 8 11 Z 6
WN1420150C M14×2 RH10 4P 16 150 20 - 10.5 8 11 C 6
WN1420150Z M14×2 RH10 2P 16 150 20 - 10.5 8 11 Z 6

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 160
 TAPS FOR CAST IRON

CB-L-OH-NRT Lc
Type:16 K

Solid carbide forming taps with long shank

d
&internal coolant fl Lk

2P chamfers,for blind hole

4P chamfers,for through hole

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, Magnesium
alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WN1415120C M14×1.5 RH8 4P 16 120 20 - 10.5 8 11 C 6
WN1415120Z M14×1.5 RH8 2P 16 120 20 - 10.5 8 11 Z 6
WN1415150C M14×1.5 RH8 4P 16 150 20 - 10.5 8 11 C 6
WN1415150Z M14×1.5 RH8 2P 16 150 20 - 10.5 8 11 Z 6
WN14125120C M14×1.25 RH7 4P 16 120 20 - 10.5 8 11 C 6
WN14125120Z M14×1.25 RH7 2P 16 120 20 - 10.5 8 11 Z 6
WN14125150C M14×1.25 RH7 4P 16 150 20 - 10.5 8 11 C 6
WN14125150Z M14×1.25 RH7 2P 16 150 20 - 10.5 8 11 Z 6
WN1410120C M14×1 RH7 4P 16 120 20 - 10.5 8 11 C 6
WN1410120Z M14×1 RH7 2P 16 120 20 - 10.5 8 11 Z 6
WN1410150C M14×1 RH7 4P 16 150 20 - 10.5 8 11 C 6
WN1410150Z M14×1 RH7 2P 16 150 20 - 10.5 8 11 Z 6
WN1620120C M16×2 RH10 4P 16 120 20 - 12.5 10 13 C 6
WN1620120Z M16×2 RH10 2P 16 120 20 - 12.5 10 13 Z 6
WN1620150C M16×2 RH10 4P 16 150 20 - 12.5 10 13 C 6
WN1620150Z M16×2 RH10 2P 16 150 20 - 12.5 10 13 Z 6
WN1615120C M16×1.5 RH8 4P 16 120 20 - 12.5 10 13 C 6
WN1615120Z M16×1.5 RH8 2P 16 120 20 - 12.5 10 13 Z 6
WN1615150C M16×1.5 RH8 4P 16 150 20 - 12.5 10 13 C 6
WN1615150Z M16×1.5 RH8 2P 16 150 20 - 12.5 10 13 Z 6
WN16125120C M16×1.25 RH7 4P 16 120 20 - 12.5 10 13 C 6
WN16125120Z M16×1.25 RH7 2P 16 120 20 - 12.5 10 13 Z 6
WN16125150C M16×1.25 RH7 4P 16 150 20 - 12.5 10 13 C 6
WN16125150Z M16×1.25 RH7 2P 16 150 20 - 12.5 10 13 Z 6
WN1610120C M16×1 RH7 4P 16 120 20 - 12.5 10 13 C 6
WN1610120Z M16×1 RH7 2P 16 120 20 - 12.5 10 13 Z 6
WN1610150C M16×1 RH7 4P 16 150 20 - 12.5 10 13 C 6
WN1610150Z M16×1 RH7 2P 16 150 20 - 12.5 10 13 Z 6
Tolerances under 6H standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

161 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

Type:3
Lc Type:5

DIN-CB-NRT Lc
Type:13 K

d
DIN Solid carbide forming taps fl Ln
L
Lk

Type:14 K
Lc
2.5P chamfers,for blind hole

d
4P chamfers,for through hole fl Ln Lk
L

◎ High-speed steel material;

◎ YC-200 coating, suitable for difficult to machine stainless steel,
excellent processing characteristics and wearresistance. CARBIDE M ISO DIN
◎ Suitable for stainless steel 200 series, 300 series, etc. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
WDN04070P M4×0.7 RH7 4P 13 63 9 12 4.5 3.4 6
WDN04070B M4×0.7 RH7 2.5P 14 63 9 12 4.5 3.4 6
WDN05080P M5×0.8 RH7 4P 13 70 10 15 6 4.9 8
WDN05080B M5×0.8 RH7 2.5P 14 70 10 15 6 4.9 8
WDN06100P M6×1 RH7 4P 13 80 10 20 6 4.9 8
WDN06100B M6×1 RH7 2.5P 14 80 10 20 6 4.9 8
WDN07100P M7×1 RH7 4P 13 80 10 20 7 5.5 8
WDN07100B M7×1 RH7 2.5P 14 80 10 20 7 5.5 8
WDN08125P M8×1.25 RH7 4P 5 90 13 22 8 6.2 9
WDN08125B M8×1.25 RH7 2.5P 5 90 13 22 8 6.2 9
WDN08100P M8×1 RH7 4P 5 90 13 22 8 6.2 9
WDN08100B M8×1 RH7 2.5P 5 90 13 22 8 6.2 9
WDN10150P M10×1.5 RH8 4P 5 100 15 24 10 8 11
WDN10150B M10×1.5 RH8 2.5P 5 100 15 24 10 8 11
WDN10125P M10×1.25 RH7 4P 5 100 15 24 10 8 11
WDN10125B M10×1.25 RH7 2.5P 5 100 15 24 10 8 11
WDN10100P M10×1 RH7 4P 5 100 15 24 10 8 11
WDN10100B M10×1 RH7 2.5P 5 100 15 24 10 8 11
WDN12175P M12×1.75 RH9 4P 5 110 17 32 9 7 10
WDN12175B M12×1.75 RH9 2.5P 5 110 17 32 9 7 10
WDN12150P M12×1.5 RH8 4P 5 110 17 32 9 7 10
WDN12150B M12×1.5 RH8 2.5P 5 110 17 32 9 7 10
WDN12125P M12×1.25 RH7 4P 5 110 17 32 9 7 10
WDN12125B M12×1.25 RH7 2.5P 5 110 17 32 9 7 10
WDN12100P M12×1 RH7 4P 5 110 17 32 9 7 10
WDN12100B M12×1 RH7 2.5P 5 110 17 32 9 7 10
WDN14200P M14×2 RH10 4P 5 110 20 33 11 9 12
WDN14200B M14×2 RH10 2.5P 5 110 20 33 11 9 12
WDN14150P M14×1.5 RH8 4P 5 110 20 33 11 9 12
WDN14150B M14×1.5 RH8 2.5P 5 110 20 33 11 9 12
WDN14125P M14×1.25 RH7 4P 5 110 20 33 11 9 12
WDN14125B M14×1.25 RH7 2.5P 5 110 20 33 11 9 12
WDN14100P M14×1 RH7 4P 5 110 20 33 11 9 12
WDN14100B M14×1 RH7 2.5P 5 110 20 33 11 9 12

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 162
 TAPS FOR CAST IRON

DIN-CB-NRT Type:5

DIN Solid carbide forming taps

2.5P chamfers,for blind hole
4P chamfers,for through hole
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, CARBIDE M ISO DIN
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
WDN16200P M16×2 RH10 4P 5 110 20 34 12 9 12
WDN16200B M16×2 RH10 2.5P 5 110 20 34 12 9 12
WDN16150P M16×1.5 RH8 4P 5 110 20 34 12 9 12
WDN16150B M16×1.5 RH8 2.5P 5 110 20 34 12 9 12
WDN16125P M16×1.25 RH7 4P 5 110 20 34 12 9 12
WDN16125B M16×1.25 RH7 2.5P 5 110 20 34 12 9 12
WDN16100P M16×1 RH7 4P 5 110 20 34 12 9 12
WDN16100B M16×1 RH7 2.5P 5 110 20 34 12 9 12
WDN18250P M18×2.5 RH10 4P 5 125 25 36 14 11 14
WDN18250B M18×2.5 RH10 2.5P 5 125 25 36 14 11 14
WDN18200P M18×2 RH10 4P 5 125 25 36 14 11 14
WDN18200B M18×2 RH10 2.5P 5 125 25 36 14 11 14
WDN18150P M18×1.5 RH8 4P 5 125 25 36 14 11 14
WDN18150B M18×1.5 RH8 2.5P 5 125 25 36 14 11 14
WDN20250P M20×2.5 RH10 4P 5 140 25 44 16 12 15
WDN20250B M20×2.5 RH10 2.5P 5 140 25 44 16 12 15
WDN20200P M20×2 RH10 4P 5 140 25 44 16 12 15
WDN20200B M20×2 RH10 2.5P 5 140 25 44 16 12 15
WDN20150P M20×1.5 RH8 4P 5 140 25 44 16 12 15
WDN20150B M20×1.5 RH8 2.5P 5 140 25 44 16 12 15
WDN22250P M22×2.5 RH10 4P 5 140 25 44 18 14.5 17
WDN22250B M22×2.5 RH10 2.5P 5 140 25 44 18 14.5 17
WDN22200P M22×2 RH10 4P 5 140 25 44 18 14.5 17
WDN22200B M22×2 RH10 2.5P 5 140 25 44 18 14.5 17
WDN22150P M22×1.5 RH8 4P 5 140 25 44 18 14.5 17
WDN22150B M22×1.5 RH8 2.5P 5 140 25 44 18 14.5 17
WDN24300P M24×3 RH12 4P 5 160 30 48 18 14.5 17
WDN24300B M24×3 RH12 2.5P 5 160 30 48 18 14.5 17
WDN24250P M24×2.5 RH10 4P 5 160 30 48 18 14.5 17
WDN24250B M24×2.5 RH10 2.5P 5 160 30 48 18 14.5 17
WDN24200P M24×2 RH10 4P 5 160 30 48 18 14.5 17
WDN24200B M24×2 RH10 2.5P 5 160 30 48 18 14.5 17
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

163 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

DIN-CB-NRT Type:5

DIN Solid carbide forming taps

2.5P chamfers,for blind hole
4P chamfers,for through hole
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production. ISO
◎ Various coating selection, suitable for Aluminum alloy, CARBIDE M 6HX
DIN
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Item No. size Limit LC Type
L fI In d k Lk
WDN27300P M27×3 RH10 4P 5 160 30 48 20 16 19
WDN27300B M27×3 RH10 2.5P 5 160 30 48 20 16 19
WDN27250P M27×2.5 RH10 4P 5 160 30 48 20 16 19
WDN27250B M27×2.5 RH10 2.5P 5 160 30 48 20 16 19
WDN27200P M27×2 RH10 4P 5 160 30 48 20 16 19
WDN27200B M27×2 RH10 2.5P 5 160 30 48 20 16 19
WDN30350P M30×3.5 RH13 4P 5 180 35 53 22 18 21
WDN30350B M30×3.5 RH13 2.5P 5 180 35 53 22 18 21
WDN30300P M30×3 RH12 4P 5 180 35 53 22 18 21
WDN30300B M30×3 RH12 2.5P 5 180 35 53 22 18 21
WDN30250P M30×2.5 RH10 4P 5 180 35 53 22 18 21
WDN30250B M30×2.5 RH10 2.5P 5 180 35 53 22 18 21
WDN30200P M30×2 RH10 4P 5 180 35 53 22 18 21
WDN30200B M30×2 RH10 2.5P 5 180 35 53 22 18 21
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 164
 TAPS FOR CAST IRON

Type:11 K

Lc

DIN-CB-OH-NRT

d
fl Ln Lk

DIN Solid carbide forming taps with internal coolant L

Type:12 K
Lc

2.5P chamfers,for blind hole

d
4P chamfers,for through hole fl Ln Lk

L
◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
WDN04070C M4×0.7 RH7 4P 11 63 9 12 4.5 3.4 6 C
WDN04070Z M4×0.7 RH7 2.5P 11 63 9 12 4.5 3.4 6 Z
WDN05080C M5×0.8 RH7 4P 11 70 10 15 6 4.9 8 C
WDN05080Z M5×0.8 RH7 2.5P 11 70 10 15 6 4.9 8 Z
WDN06100C M6×1 RH7 4P 11 80 10 20 6 4.9 8 C
WDN06100Z M6×1 RH7 2.5P 11 80 10 20 6 4.9 8 Z
WDN07100C M7×1 RH7 4P 11 80 10 20 7 5.5 8 C
WDN07100Z M7×1 RH7 2.5P 11 80 10 20 7 5.5 8 Z
WDN08125C M8×1.25 RH7 4P 12 90 13 22 8 6.2 9 C
WDN08125Z M8×1.25 RH7 2.5P 12 90 13 22 8 6.2 9 Z
WDN08100C M8×1 RH7 4P 12 90 13 22 8 6.2 9 C
WDN08100Z M8×1 RH7 2.5P 12 90 13 22 8 6.2 9 Z
WDN10150C M10×1.5 RH8 4P 12 100 15 24 10 8 11 C
WDN10150Z M10×1.5 RH8 2.5P 12 100 15 24 10 8 11 Z
WDN10125C M10×1.25 RH7 4P 12 100 15 24 10 8 11 C
WDN10125Z M10×1.25 RH7 2.5P 12 100 15 24 10 8 11 Z
WDN10100C M10×1 RH7 4P 12 100 15 24 10 8 11 C
WDN10100Z M10×1 RH7 2.5P 12 100 15 24 10 8 11 Z
WDN12175C M12×1.75 RH9 4P 12 110 17 32 9 7 10 C
WDN12175Z M12×1.75 RH9 2.5P 12 110 17 32 9 7 10 Z
WDN12150C M12×1.5 RH8 4P 12 110 17 32 9 7 10 C
WDN12150Z M12×1.5 RH8 2.5P 12 110 17 32 9 7 10 Z
WDN12125C M12×1.25 RH7 4P 12 110 17 32 9 7 10 C
WDN12125Z M12×1.25 RH7 2.5P 12 110 17 32 9 7 10 Z
WDN12100C M12×1 RH7 4P 12 110 17 32 9 7 10 C
WDN12100Z M12×1 RH7 2.5P 12 110 17 32 9 7 10 Z
WDN14200C M14×2 RH10 4P 12 110 20 33 11 9 12 C
WDN14200Z M14×2 RH10 2.5P 12 110 20 33 11 9 12 Z
WDN14150C M14×1.5 RH8 4P 12 110 20 33 11 9 12 C
WDN14150Z M14×1.5 RH8 2.5P 12 110 20 33 11 9 12 Z
WDN14125C M14×1.25 RH7 4P 12 110 20 33 11 9 12 C
WDN14125Z M14×1.25 RH7 2.5P 12 110 20 33 11 9 12 Z
WDN14100C M14×1 RH7 4P 12 110 20 33 11 9 12 C
WDN14100Z M14×1 RH7 2.5P 12 110 20 33 11 9 12 Z

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

165 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

DIN-CB-OH-NRT Lc
Type:12
K

DIN Solid carbide forming taps with internal coolant

d
fl Ln Lk
2.5P chamfers,for blind hole L

4P chamfers,for through hole

◎ Solid carbide material.
◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
WDN16200C M16×2 RH10 4P 12 110 20 34 12 9 12 C
WDN16200Z M16×2 RH10 2.5P 12 110 20 34 12 9 12 Z
WDN16150C M16×1.5 RH8 4P 12 110 20 34 12 9 12 C
WDN16150Z M16×1.5 RH8 2.5P 12 110 20 34 12 9 12 Z
WDN16125C M16×1.25 RH7 4P 12 110 20 34 12 9 12 C
WDN16125Z M16×1.25 RH7 2.5P 12 110 20 34 12 9 12 Z
WDN16100C M16×1 RH7 4P 12 110 20 34 12 9 12 C
WDN16100Z M16×1 RH7 2.5P 12 110 20 34 12 9 12 Z
WDN18250C M18×2.5 RH10 4P 12 125 25 36 14 11 14 C
WDN18250Z M18×2.5 RH10 2.5P 12 125 25 36 14 11 14 Z
WDN18200C M18×2 RH10 4P 12 125 25 36 14 11 14 C
WDN18200Z M18×2 RH10 2.5P 12 125 25 36 14 11 14 Z
WDN18150C M18×1.5 RH8 4P 12 125 25 36 14 11 14 C
WDN18150Z M18×1.5 RH8 2.5P 12 125 25 36 14 11 14 Z
WDN20250C M20×2.5 RH10 4P 12 140 25 44 16 12 15 C
WDN20250Z M20×2.5 RH10 2.5P 12 140 25 44 16 12 15 Z
WDN20200C M20×2 RH10 4P 12 140 25 44 16 12 15 C
WDN20200Z M20×2 RH10 2.5P 12 140 25 44 16 12 15 Z
WDN20150C M20×1.5 RH8 4P 12 140 25 44 16 12 15 C
WDN20150Z M20×1.5 RH8 2.5P 12 140 25 44 16 12 15 Z
WDN22250C M22×2.5 RH10 4P 12 140 25 44 18 14.5 17 C
WDN22250Z M22×2.5 RH10 2.5P 12 140 25 44 18 14.5 17 Z
WDN22200C M22×2 RH10 4P 12 140 25 44 18 14.5 17 C
WDN22200Z M22×2 RH10 2.5P 12 140 25 44 18 14.5 17 Z
WDN22150C M22×1.5 RH8 4P 12 140 25 44 18 14.5 17 C
WDN22150Z M22×1.5 RH8 2.5P 12 140 25 44 18 14.5 17 Z
WDN24300C M24×3 RH12 4P 12 160 30 48 18 14.5 17 C
WDN24300Z M24×3 RH12 2.5P 12 160 30 48 18 14.5 17 Z
WDN24250C M24×2.5 RH10 4P 12 160 30 48 18 14.5 17 C
WDN24250Z M24×2.5 RH10 2.5P 12 160 30 48 18 14.5 17 Z
WDN24200C M24×2 RH10 4P 12 160 30 48 18 14.5 17 C
WDN24200Z M24×2 RH10 2.5P 12 160 30 48 18 14.5 17 Z
WDN27300C M27×3 RH10 4P 12 160 30 48 20 16 19 C
WDN27300Z M27×3 RH10 2.5P 12 160 30 48 20 16 19 Z

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 166
 TAPS FOR CAST IRON

DIN-CB-OH-NRT Lc
Type:12
K

DIN Solid carbide forming taps with internal coolant

d
fl Ln Lk

2.5P chamfers,for blind hole L

4P chamfers,for through hole

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm) Oil groove

Item No. size Limit LC Type type
L fI In d k Lk
WDN27250C M27×2.5 RH10 4P 12 160 30 48 20 16 19 C
WDN27250Z M27×2.5 RH10 2.5P 12 160 30 48 20 16 19 Z
WDN27200C M27×2 RH10 4P 12 160 30 48 20 16 19 C
WDN27200Z M27×2 RH10 2.5P 12 160 30 48 20 16 19 Z
WDN30350C M30×3.5 RH13 4P 12 180 35 53 22 18 21 C
WDN30350Z M30×3.5 RH13 2.5P 12 180 35 53 22 18 21 Z
WDN30300C M30×3 RH12 4P 12 180 35 53 22 18 21 C
WDN30300Z M30×3 RH12 2.5P 12 180 35 53 22 18 21 Z
WDN30250C M30×2.5 RH10 4P 12 180 35 53 22 18 21 C
WDN30250Z M30×2.5 RH10 2.5P 12 180 35 53 22 18 21 Z
WDN30200C M30×2 RH10 4P 12 180 35 53 22 18 21 C
WDN30200Z M30×2 RH10 2.5P 12 180 35 53 22 18 21 Z
Tolerances under 6HX [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

167 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

Type:5

DIN-CB-SFT Lc
Type:13 K

Solid carbide straight fluted taps

d
Type:6
fl Ln Lk
L

◎ Solid carbide material.

◎ Suitable for high-speed, long tool life mass production.
◎ Various coating selection, suitable for Aluminum alloy, CARBIDE M ISO DIN
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy. 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WDS040070 M4×0.7 P2 2.5P 13 63 13 8 4.5 3.4 6 3
WDS050080 M5×0.8 P2 2.5P 13 70 15 10 6 4.9 8 3
WDS060100 M6×1 P2 2.5P 13 80 17 13 6 4.9 8 3
WDS070100 M7×1 P3 2.5P 13 80 17 13 7 5.5 8 3
WDS080100 M8×1 P3 2.5P 5 90 16 19 8 6.2 9 3
WDS080125 M8×1.25 P3 2.5P 5 90 16 19 8 6.2 9 3
WDS100150 M10×1.5 P4 2.5P 5 100 18 21 10 8 11 3
WDS100125 M10×1.25 P3 2.5P 5 100 18 21 10 8 11 3
WDS120175 M12×1.75 P4 2.5P 6 110 22 - 9 7 10 3
WDS120150 M12×1.5 P4 2.5P 6 110 22 - 9 7 10 3
WDS120125 M12×1.25 P3 2.5P 6 110 22 - 9 7 10 3
WDS140200 M14×2 P5 2.5P 6 110 26 - 11 9 12 3
WDS140150 M14×1.5 P4 2.5P 6 110 22 - 11 9 12 3
WDS140125 M14×1.25 P3 2.5P 6 110 22 - 11 9 12 3
WDS160200 M16×2 P5 2.5P 6 110 27 - 12 9 12 3
WDS160150 M16×1.5 P4 2.5P 6 110 22 - 12 9 12 3
WDS160125 M16×1.25 P3 2.5P 6 110 18 - 12 9 12 3
WDS180250 M18×2.5 P6 2.5P 6 125 30 - 14 11 14 4
WDS180200 M18×2 P5 2.5P 6 125 26 - 14 11 14 4
WDS180150 M18×1.5 P4 2.5P 6 125 25 - 14 11 14 4
WDS200250 M20×2.5 P6 2.5P 6 140 32 - 16 12 15 4
WDS200200 M20×2 P5 2.5P 6 140 27 - 16 12 15 4
WDS200150 M20×1.5 P4 2.5P 6 140 25 - 16 12 15 4
WDS220250 M22×2.5 P6 2.5P 6 140 32 - 18 14.5 17 4
WDS220200 M22×2 P5 2.5P 6 140 27 - 18 14.5 17 4
WDS220150 M22×1.5 P4 2.5P 6 140 25 - 18 14.5 17 4
WDS240300 M24×3 P6 2.5P 6 140 34 - 18 14.5 17 4
WDS240200 M24×2 P5 2.5P 6 140 27 - 18 14.5 17 4
WDS240150 M24×1.5 P4 2.5P 6 140 27 - 18 14.5 17 4
WDS270300 M27×3 P6 2.5P 6 160 36 - 20 16 19 4
WDS300350 M30×3.5 P7 2.5P 6 180 40 - 22 18 21 4
Tolerances under 6HX [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 168
 TAPS FOR CAST IRON

Type:12
K
Lc

DIN-CB-OH-SFT

d
Type:11 K fl Ln Lk

Lc L

Solid carbide spiral fluted taps with

d
K
fl Ln Lk Lc
Type:16

internal coolant L

d
fl Lk

◎ Solid carbide material.

◎Suitable for high-speed, long tool life mass production.
◎Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WDS04070C M4×0.7 P2 2.5P 11 63 13 8 4.5 3.4 6 C 3
WDS04070Z M4×0.7 P2 2.5P 11 63 13 8 4.5 3.4 6 Z 3
WDS05080C M5×0.8 P2 2.5P 11 70 15 10 6 4.9 8 C 3
WDS05080Z M5×0.8 P2 2.5P 11 70 15 10 6 4.9 8 Z 3
WDS06100C M6×1 P2 2.5P 11 80 17 13 6 4.9 8 C 3
WDS06100Z M6×1 P2 2.5P 11 80 17 13 6 4.9 8 Z 3
WDS07100C M7×1 P3 2.5P 11 80 17 13 7 5.5 8 C 3
WDS07100Z M7×1 P3 2.5P 11 80 17 13 7 5.5 8 Z 3
WDS08100C M8×1 P3 2.5P 12 90 16 19 8 6.2 9 C 3
WDS08100Z M8×1 P3 2.5P 12 90 16 19 8 6.2 9 Z 3
WDS08125C M8×1.25 P3 2.5P 12 90 16 19 8 6.2 9 C 3
WDS08125Z M8×1.25 P3 2.5P 12 90 16 19 8 6.2 9 Z 3
WDS10150C M10×1.5 P4 2.5P 12 100 18 21 10 8 11 C 3
WDS10150Z M10×1.5 P4 2.5P 12 100 18 21 10 8 11 Z 3
WDS10125C M10×1.25 P3 2.5P 12 100 18 21 10 8 11 C 3
WDS10125Z M10×1.25 P3 2.5P 12 100 18 21 10 8 11 Z 3
WDS12175C M12×1.75 P4 2.5P 16 110 22 - 9 7 10 C 3
WDS12175Z M12×1.75 P4 2.5P 16 110 22 - 9 7 10 Z 3
WDS12150C M12×1.5 P4 2.5P 16 110 22 - 9 7 10 C 3
WDS12150Z M12×1.5 P4 2.5P 16 110 22 - 9 7 10 Z 3
WDS12125C M12×1.25 P3 2.5P 16 110 22 - 9 7 10 C 3
WDS12125Z M12×1.25 P3 2.5P 16 110 22 - 9 7 10 Z 3
WDS14200C M14×2 P5 2.5P 16 110 26 - 11 9 12 C 3
WDS14200Z M14×2 P5 2.5P 16 110 26 - 11 9 12 Z 3
WDS14150C M14×1.5 P4 2.5P 16 110 22 - 11 9 12 C 3
WDS14150Z M14×1.5 P4 2.5P 16 110 22 - 11 9 12 Z 3
WDS14125C M14×1.25 P3 2.5P 16 110 22 - 11 9 12 C 3
WDS14125Z M14×1.25 P3 2.5P 16 110 22 - 11 9 12 Z 3
WDS16200C M16×2 P5 2.5P 16 110 27 - 12 9 12 C 3
WDS16200Z M16×2 P5 2.5P 16 110 27 - 12 9 12 Z 3
WDS16150C M16×1.5 P4 2.5P 16 110 22 - 12 9 12 C 3
WDS16150Z M16×1.5 P4 2.5P 16 110 22 - 12 9 12 Z 3
WDS16125C M16×1.25 P3 2.5P 16 110 18 - 12 9 12 C 3
WDS16125Z M16×1.25 P3 2.5P 16 110 18 - 12 9 12 Z 3

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

169 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

K
DIN-CB-OH-SFT Lc
Type:16

Solid carbide spiral fluted taps with

d
fl Lk

internal coolant L

◎ Solid carbide material.

◎Suitable for high-speed, long tool life mass production.
◎Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WDS18250C M18×2.5 P6 2.5P 16 125 30 － 14 11 14 C 4
WDS18250Z M18×2.5 P6 2.5P 16 125 30 － 14 11 14 Z 4
WDS18200C M18×2 P5 2.5P 16 125 26 － 14 11 14 C 4
WDS18200Z M18×2 P5 2.5P 16 125 26 － 14 11 14 Z 4
WDS18150C M18×1.5 P4 2.5P 16 125 25 － 14 11 14 C 4
WDS18150Z M18×1.5 P4 2.5P 16 125 25 － 14 11 14 Z 4
WDS20250C M20×2.5 P6 2.5P 16 140 32 － 16 12 15 C 4
WDS20250Z M20×2.5 P6 2.5P 16 140 32 － 16 12 15 Z 4
WDS20020C M20×2 P5 2.5P 16 140 27 － 16 12 15 C 4
WDS20200Z M20×2 P5 2.5P 16 140 27 － 16 12 15 Z 4
WDS20150C M20×1.5 P4 2.5P 16 140 25 － 16 12 15 C 4
WDS20150Z M20×1.5 P4 2.5P 16 140 25 － 16 12 15 Z 4
WDS22250C M22×2.5 P6 2.5P 16 140 32 － 18 14.5 17 C 4
WDS22250Z M22×2.5 P6 2.5P 16 140 32 － 18 14.5 17 Z 4
WDS22200C M22×2 P5 2.5P 16 140 27 － 18 14.5 17 C 4
WDS22200Z M22×2 P5 2.5P 16 140 27 － 18 14.5 17 Z 4
WDS22150C M22×1.5 P4 2.5P 16 140 25 － 18 14.5 17 C 4
WDS22150Z M22×1.5 P4 2.5P 16 140 25 － 18 14.5 17 Z 4
WDS24300C M24×3 P6 2.5P 16 140 34 － 18 14.5 17 C 4
WDS24300Z M24×3 P6 2.5P 16 140 34 － 18 14.5 17 Z 4
WDS24200C M24×2 P5 2.5P 16 140 27 － 18 14.5 17 C 4
WDS24200Z M24×2 P5 2.5P 16 140 27 － 18 14.5 17 Z 4
WDS24150C M24×1.5 P4 2.5P 16 140 27 － 18 14.5 17 C 4
WDS24150Z M24×1.5 P4 2.5P 16 140 27 － 18 14.5 17 Z 4
WDS27300C M27×3 P6 2.5P 16 160 36 － 20 16 19 C 4
WDS27300Z M27×3 P6 2.5P 16 160 36 － 20 16 19 Z 4
WDS30350C M30×3.5 P7 2.5P 16 180 40 － 22 18 21 C 4
WDS30350Z M30×3.5 P7 2.5P 16 180 40 － 22 18 21 Z 4
Tolerances under 6HX [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - - - ● ● ● - - -

[Link] 170
 TAPS FOR CAST IRON

Type:5

CB-HT Type:1

Solid carbide straight fluted taps

L Type:6

◎ Solid carbide material.

◎ YC-T50 coating, excellent wear resistance.
◎Suitable for gray cast iron, ductile cast iron mass continuous CARBIDE M ISO JIS
processing threading, high processing accuracy 6H

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WH050080 M5×0.8 P3 2.5P 1 62 16 - 5.5 4.5 7 3
WH060100 M6×1 P3 2.5P 5 62 19 10 6 4.5 7 3
WH080125 M8×1.25 P4 2.5P 6 75 22 - 6.2 5 8 3
WH100150 M10×1.5 P5 2.5P 6 75 24 - 7 5.5 8 4
MH100125 M10×1.25 P4 2.5P 6 75 24 - 7 5.5 8 4
WH120175 M12×1.75 P5 2.5P 6 82 29 - 8.5 6.5 9 4
WH120150 M12×1.5 P5 2.5P 6 82 29 - 8.5 6.5 9 4
WH120125 M12×1.25 P5 2.5P 6 82 29 - 8.5 6.5 9 4
WH140200 M14×2 P6 2.5P 6 88 20 - 10.5 8 11 4
WH140150 M14×1.5 P5 2.5P 6 88 20 - 10.5 8 11 4
WH160200 M16×2 P6 2.5P 6 95 20 - 12.5 10 13 4
WH160150 M16×1.5 P5 2.5P 6 95 20 - 12.5 10 13 4
Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

171 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

Type:12
K
Lc

d
CB-OH-HT LC
Type:15 K fl Ln
L
Lk

Solid carbide straight fluted taps

d
Lk Lc
Type:16
fl

K
L
with internal coolant

d
fl Lk
L
◎ Solid carbide material.
◎ YC-T50 coating, excellent wear resistance.
◎Suitable for gray cast iron, ductile cast iron mass continuous
processing threading, high processing accuracy

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WH050080C M5×0.8 P3 2.5P 15 57 16 - 5.5 4.5 7 C 3

WH050080Z M5×0.8 P3 2.5P 15 57 16 - 5.5 4.5 7 Z 3

WH060100C M6×1 P3 2.5P 12 62 19 10 6 4.5 7 C 3

WH060100Z M6×1 P3 2.5P 12 62 19 10 6 4.5 7 Z 3

WH080125C M8×1.25 P4 2.5P 16 75 22 - 6.2 5 8 C 3

WH080125Z M8×1.25 P4 2.5P 16 75 22 - 6.2 5 8 Z 3

WH100150C M10×1.5 P5 2.5P 16 75 24 - 7 5.5 8 C 4

WH100150Z M10×1.5 P5 2.5P 16 75 24 - 7 5.5 8 Z 4

WH100125C M10×1.25 P4 2.5P 16 75 24 - 7 5.5 8 C 4

WH100125Z M10×1.25 P4 2.5P 16 75 24 - 7 5.5 8 Z 4

WH120175C M12×1.75 P5 2.5P 16 82 29 - 8.5 6.5 9 C 4

WH120175Z M12×1.75 P5 2.5P 16 82 29 - 8.5 6.5 9 Z 4

WH120150C M12×1.5 P5 2.5P 16 82 29 - 8.5 6.5 9 C 4

WH120150Z M12×1.5 P5 2.5P 16 82 29 - 8.5 6.5 9 Z 4

WH120125C M12×1.25 P5 2.5P 16 82 29 - 8.5 6.5 9 C 4

WH120125Z M12×1.25 P5 2.5P 16 82 29 - 8.5 6.5 9 Z 4

WH140200C M14×2 P6 2.5P 16 88 20 - 10.5 8 11 C 4

WH140200Z M14×2 P6 2.5P 16 88 20 - 10.5 8 11 Z 4

WH140150C M14×1.5 P5 2.5P 16 88 20 - 10.5 8 11 C 4

WH140150Z M14×1.5 P5 2.5P 16 88 20 - 10.5 8 11 Z 4

WH160200C M16×2 P6 2.5P 16 95 20 - 12.5 10 13 C 4

WH160200Z M16×2 P6 2.5P 16 95 20 - 12.5 10 13 Z 4

WH160150C M16×1.5 P5 2.5P 16 95 20 - 12.5 10 13 C 4

WH160150Z M16×1.5 P5 2.5P 16 95 20 - 12.5 10 13 Z 4

Tolerances under 6H [Link] tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

[Link] 172
 TAPS FOR CAST IRON

Type:5

DIN-CB-HT Lc
Type:13 K

DIN Solid carbide straight fluted

d
fl Ln Lk Type:6
L

taps
◎ Solid carbide material.
◎ YC-T50 coating, excellent wear resistance.
◎Suitable for gray cast iron, ductile cast iron mass continuous CARBIDE M ISO DIN
processing threading, high processing accuracy 6HX

Thread Dimensions(mm)
Item No. size Limit LC Type Flutes
L fI In d k Lk
WDH050080 M5×0.8 P2 2.5P 13 70 15 10 6 4.9 8 3
WDH060100 M6×1 P2 2.5P 13 80 17 13 6 4.9 8 3
WDH070100 M7×1 P3 2.5P 13 80 17 13 7 5.5 8 3
WDH080100 M8×1 P3 2.5P 5 90 16 19 8 6.2 9 4
WDH080125 M8×1.25 P3 2.5P 5 90 16 19 8 6.2 9 4
WDH100150 M10×1.5 P4 2.5P 5 100 18 21 10 8 11 4
WDH100125 M10×1.25 P3 2.5P 5 100 18 21 10 8 11 4
WDH120175 M12×1.75 P4 2.5P 6 110 22 - 9 7 10 4
WDH120150 M12×1.5 P3 2.5P 6 110 22 - 9 7 10 4
WDH120125 M12×1.25 P3 2.5P 6 110 22 - 9 7 10 4
WDH140200 M14×2 P5 2.5P 6 110 26 - 11 9 12 4
WDH140150 M14×1.5 P4 2.5P 6 110 22 - 11 9 12 4
WDH140125 M14×1.25 P3 2.5P 6 110 22 - 11 9 12 4
WDH160200 M16×2 P5 2.5P 6 110 27 - 12 9 12 4
WDH160150 M16×1.5 P4 2.5P 6 110 22 - 12 9 12 4
WDH160125 M16×1.25 P3 2.5P 6 110 18 - 12 9 12 4
WDH180250 M18×2.5 P6 2.5P 6 125 30 - 14 11 14 4
WDH180200 M18×2 P5 2.5P 6 125 26 - 14 11 14 4
WDH180150 M18×1.5 P4 2.5P 6 125 25 - 14 11 14 4
WDH200250 M20×2.5 P6 2.5P 6 140 32 - 16 12 15 4
WDH200200 M20×2 P5 2.5P 6 140 27 - 16 12 15 4
WDH200150 M20×1.5 P4 2.5P 6 140 25 - 16 12 15 4
WDH220250 M22×2.5 P6 2.5P 6 140 32 - 18 14.5 17 4
WDH220200 M22×2 P5 2.5P 6 140 27 - 18 14.5 17 4
WDH220150 M22×1.5 P4 2.5P 6 140 25 - 18 14.5 17 4
WDH240300 M24×3 P6 2.5P 6 140 34 - 18 14.5 17 4
WDH240200 M24×2 P5 2.5P 6 140 27 - 18 14.5 17 4
WDH240150 M24×1.5 P4 2.5P 6 140 27 - 18 14.5 17 4
WDH270300 M27×3 P6 2.5P 6 160 36 - 20 16 19 4
WDH300350 M30×3.5 P7 2.5P 6 180 40 - 22 18 21 4
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

173 NINGBO NICHE TOOLS CO. LTD

TAPS FOR CAST IRON

Type:12
K
Lc

DIN-CB-OH-HT

d
K
fl Ln Lk
Type:11

L
Lc

DIN Solid carbide straight fluted

d
fl Ln Lk
Lc
Type:16

K
L

taps with internal coolant

d
fl Lk
L
◎ Solid carbide material.
◎Suitable for high-speed, long tool life mass production.
◎Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WDH05080C M5×0.8 P2 2.5P 11 70 15 10 6 4.9 8 C 3
WDH05080Z M5×0.8 P2 2.5P 11 70 15 10 6 4.9 8 Z 3
WDH06100C M6×1 P2 2.5P 11 80 17 13 6 4.9 8 C 3
WDH06100Z M6×1 P2 2.5P 11 80 17 13 6 4.9 8 Z 3
WDH07100C M7×1 P3 2.5P 11 80 17 13 7 5.5 8 C 3
WDH07100Z M7×1 P3 2.5P 11 80 17 13 7 5.5 8 Z 3
WDH08100C M8×1 P3 2.5P 12 90 16 19 8 6.2 9 C 4
WDH08100Z M8×1 P3 2.5P 12 90 16 19 8 6.2 9 Z 4
WDH08125C M8×1.25 P3 2.5P 12 90 16 19 8 6.2 9 C 4
WDH08125Z M8×1.25 P3 2.5P 12 90 16 19 8 6.2 9 Z 4
WDH10150C M10×1.5 P4 2.5P 12 100 18 21 10 8 11 C 4
WDH10150Z M10×1.5 P4 2.5P 12 100 18 21 10 8 11 Z 4
WDH10125C M10×1.25 P3 2.5P 12 100 18 21 10 8 11 C 4
WDH10125Z M10×1.25 P3 2.5P 12 100 18 21 10 8 11 Z 4
WDH12175C M12×1.75 P4 2.5P 16 110 22 - 9 7 10 C 4
WDH12175Z M12×1.75 P4 2.5P 16 110 22 - 9 7 10 Z 4
WDH12150C M12×1.5 P3 2.5P 16 110 22 - 9 7 10 C 4
WDH12150Z M12×1.5 P3 2.5P 16 110 22 - 9 7 10 Z 4
WDH12125C M12×1.25 P3 2.5P 16 110 22 - 9 7 10 C 4
WDH12125Z M12×1.25 P3 2.5P 16 110 22 - 9 7 10 Z 4
WDH14200C M14×2 P5 2.5P 16 110 26 - 11 9 12 C 4
WDH14200Z M14×2 P5 2.5P 16 110 26 11 9 12 Z 4
WDH14150C M14×1.5 P4 2.5P 16 110 22 - 11 9 12 C 4
WDH14150Z M14×1.5 P4 2.5P 16 110 22 - 11 9 12 Z 4
WDH14125C M14×1.25 P3 2.5P 16 110 22 - 11 9 12 C 4
WDH14125Z M14×1.25 P3 2.5P 16 110 22 - 11 9 12 Z 4
WDH16200C M16×2 P5 2.5P 16 110 27 - 12 9 12 C 4
WDH16200Z M16×2 P5 2.5P 16 110 27 - 12 9 12 Z 4
WDH16150C M16×1.5 P4 2.5P 16 110 22 - 12 9 12 C 4
WDH16150Z M16×1.5 P4 2.5P 16 110 22 - 12 9 12 Z 4
WDH16125C M16×1.25 P3 2.5P 16 110 18 - 12 9 12 C 4
WDH16125Z M16×1.25 P3 2.5P 16 110 18 - 12 9 12 Z 4
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

[Link] 174
 TAPS FOR CAST IRON

Lc
DIN-CB-OH-HT
Type:16

K
d
DIN Solid carbide straight fluted fl Lk

taps with internal coolant L

◎ Solid carbide material.

◎Suitable for high-speed, long tool life mass production.
◎Various coating selection, suitable for Aluminum alloy,
Magnesium alloy, Copper alloy, Cast Aluminum, Cast Zinc alloy.

Thread Dimensions(mm)
Dimensions(mm) Oil groove
Item No. size Limit LC LC Type Type type Flutes
L LfI InfI d In k dLk k Lk
WDH18250C M18×2.5 P6 2.5P 16 125 30 - 14 11 14 C 4
Flutes
WDH18250Z M18×2.5 P6 2.5P 16 125 30 - 14 11 14 Z 4
WDH18200C M18×2 P5 2.5P 16 125 26 - 14 11 14 C 4
WDH18200Z M18×2 P5 2.5P 16 125 26 - 14 11 14 Z 4
WDH18150C M18×1.5 P4 2.5P 16 125 25 - 14 11 14 C 4
WDH18150Z M18×1.5 P4 2.5P 16 125 25 - 14 11 14 Z 4
WDH20250C M20×2.5 P6 2.5P 16 140 32 - 16 12 15 C 4
WDH20250Z M20×2.5 P6 2.5P 16 140 32 - 16 12 15 Z 4
WDH20200C M20×2 P5 2.5P 16 140 27 - 16 12 15 C 4
WDH20200Z M20×2 P5 2.5P 16 140 27 - 16 12 15 Z 4
WDH20150C M20×1.5 P4 2.5P 16 140 25 - 16 12 15 C 4
WDH20150Z M20×1.5 P4 2.5P 16 140 25 - 16 12 15 Z 4
WDH22250C M22×2.5 P6 2.5P 16 140 32 - 18 14.5 17 C 4
WDH22250Z M22×2.5 P6 2.5P 16 140 32 - 18 14.5 17 Z 4
WDH22200C M22×2 P5 2.5P 16 140 27 - 18 14.5 17 C 4
WDH22200Z M22×2 P5 2.5P 16 140 27 - 18 14.5 17 Z 4
WDH22150C M22×1.5 P4 2.5P 16 140 25 - 18 14.5 17 C 4
WDH22150Z M22×1.5 P4 2.5P 16 140 25 - 18 14.5 17 Z 4
WDH24300C M24×3 P6 2.5P 16 140 34 - 18 14.5 17 C 4
WDH24300Z M24×3 P6 2.5P 16 140 34 - 18 14.5 17 Z 4
WDH24200C M24×2 P5 2.5P 16 140 27 - 18 14.5 17 C 4
WDH24200Z M24×2 P5 2.5P 16 140 27 - 18 14.5 17 Z 4
WDH24150C M24×1.5 P4 2.5P 16 140 27 - 18 14.5 17 C 4
WDH24150Z M24×1.5 P4 2.5P 16 140 27 - 18 14.5 17 Z 4
WDH27300C M27×3 P6 2.5P 16 160 36 - 20 16 19 C 4
WDH27300Z M27×3 P6 2.5P 16 160 36 - 20 16 19 Z 4
WDH30350C M30×3.5 P7 2.5P 16 180 40 - 22 18 21 C 4
WDH30350Z M30×3.5 P7 2.5P 16 180 40 - 22 18 21 Z 4
Tolerances under 6HX standard. Other tolerances and Special tap chamfer custom are available.

P P P
SCM
M(SUS) K(FC) K(FCD) N(AL) N(Cu) N(ADC) S(Ti) S(Ni) H
HRC35↓ HRC35↑

- - - - - ● ● - - - - - -

175 NINGBO NICHE TOOLS CO. LTD

RECOMMENDED DRILL HOLE SIZE FOR FORMING TAPS

Metric Screw Threads (NRT)

Or JlS class 1 drill hole dia For JlS class 2 drill hole dia
Thread Size RH MIN～MAX RH MIN～MAX
Precision Thread Overlap Ratio:% Precision Thread Overlap Ratio:%
M1 ×0.25 2 0.87~0.89[100~85) 4 0.90~0.92(100~80)
M1.2×0.25 2 1.07~1.09 (100~85) 4 1.10~1.12 (100~80)
M1.4×0.3 2 1.244~1.263(100~85) 4 1.270~1.294(100~80)
M1.6×0.35 2 1.40~1.44 (100~80) 4 1.44 ~1.48 (100~75)
M1.7 ×0.35 2 1.51~1.54 (100~80) 4 1.54 ~1.58 (100~75)
M2×0.4 2 1.78~1.82(100~80) 4 1.81~1.85(100~75)
M2.3×0.4 2 2.08~2.12 (100~80) 4 2.11~2.15(100~75)
M2.5 ×0.45 2 2.25~2.29 (100~80) 4 2.28~2.33(100~75)
M2.6×0.45 2 2.35~2.39 (100~80) 4 2.38~2.43(100~75)
M3×0.5 3 2.74~2.78 (100~80) 5 2.76~2.81(100~75)
M3.5×0.6 3 3.18 ~3.21 (100~85) 5 3.20~3.26 (100~75)
M4 ×0.7 4 3.63~3.67(100~85) 6 3.65~3.70(100~85)
M5 ×0.8 4 4.57~4.62(100~85) 6 4.59~4.66 (100~80)
M6×1.0 4 5.45~5.51(100~85) 7 5.48~5.57(100~80)
M7 ×1.0 4 6.45~6.51(100~85) 7 6.48~6.57(100~80)
M8 ×1.25 5 7.31~7.38 (100~85) 7 7.34~7.41 (100~85)
M10 ×1.5 5 9.16~9.22 (100~90) 7 9.18~9.28(100~85)
M12 ×1.75 5 11.01~11.08(100~90) 8 11.05~11.15(100~85)
M14×2.0 6 12.83~12.95(100~90) 10 12.92~13.04(100~85)
M16×2.0 6 14.87~14.95(100~90) 10 14.92~15.04(100~85)

NRT hole diameter calculating mode

[Link]=D-P*0.45 dN=Hole diameter

[Link]=D-0.2P-0.00403 *P*f1+0.0127*n D=Diameter
Eg:M3*0.5 RH6 JISclass 2 drill hole P=Pitch
Thread overlap ratio 90% f1=Thread overlap ratio
dN=3-0.2*0.5-0.00403*0.5*90+0.0127 n=RH
*6=2.79

[Link] 176
 RECOMMENDED DRILL HOLE SIZE FOR FORMING TAPS

Metric Screw Threads (NRT)

For class 2B drill hole dia For class 3B drill hole dia
Thread Size Major pitch RH MIN～MAX RH MIN～MAX
Diameter Thread Precision Thread Overlap Ratio:% Precision Thread Overlap Ratio:%
NO.0～80UNF 1.524 0.3175 4 1.38～1.41(100～65) 3 1.36～1.40(100～65)
1～72UNF 1.854 0.3528 4 1.68～1.72(100～65) 3 1.67～1.71(100～65)
1～64UNC 1.854 0.3969 4 1.66～1.70(100～65) 3 1.65～1.69(100～65)
2～56UNC 2.184 0.4536 4 1.96～2.02(100～65) 3 1.95～2.01 (100～65)
2～64UNF 2.184 0.3969 4 1.98～2.04 (100～65) 3 1.97～2.03 (100～65)
3～48UNC 2.514 0.5292 4 2.25～2.32(100～65) 3 2.23～2.31(100～65)
3～56UNF 2.514 0.4536 4 2.29～2.35 (100～65) 3 2.28～2.34 (100～65)
4～40UNC 2.844 0.635 5 2.52～2.60 (100～70) 3 2.50～2.58 (100～70)
4～48UNF 2.844 0.5292 4 2.57～2.64 (100～70) 3 2.56～2.63 (100～70)
6～32UNC 3.504 0.7938 5 3.09～3.17 (100～75) 3 3.06～3.14 (100～75)
6～40UNF 3.504 0.635 5 3.19～3.26(100～70) 3 3.16～3.22 (100～75)
8～32UNC 4.164 0.7938 6 3.75～3.83 (100～75) 4 3.74～3.82(100～75)
8～36UNF 4.164 0.7056 5 3.80～3.88 (100～75) 4 3.79～3.86 (100～75)
10～24UNC 4.824 1.0583 6 4.26～4.35 (100～80) 4 4.24～4.32(100～80)
10～32UNF 4.824 0.7938 5 4.41～4.48 (100～80) 4 4.40～4.46 (100～80)
12～24UNC 5.484 1.0583 6 4.92～5.01 (100～8O) 4 4.90～4.96(100～85)
12～28UNF 5.484 0.9071 5 5.00～5.08 (100～80) 4 4.99～5.06(100～80)
1/4～20UNC 6.35 1.27 6 5.66～5.76(100～80) 4 5.64～5.74 (100～80)
1/4～28UNF 6.35 0.9071 5 5.86～5.93 (100～80) 4 5.85～5.92 (100～80)
5/16～18UNC 7.9375 1.4111 7 7.18～7.29 (100～80) 5 7.15～7.24 (100～85)
5/16～24UNF 7.9375 1.0583 6 7.38～7.46(100～80) 5 7.36～7.43 (100～85)
3/8～16UNC 9.525 1.5875 7 8.66～8.78 (100～80) 5 8.63～8.73 (100～85)
3/8～24UNF 9.525 1.0583 6 8.96～9.05 (100～80) 5 8.95～9.02 (100～85)
7/16～14UNC 11.1125 1.814 7 10.11～10.25(100～80) 5 10.08～10.19[100～85)
7/16～20UNF 11.1125 1.27 7 10.44～10.54 (100～80) 5 10.41～10.49(100～85)
1/2～13UNC 12.7 1.9538 8 11.62～11.78 (100～80) 6 11.60～11.68 (100～90)
1/2～20UNF 12.7 1.27 7 12.02～12.12(100～80) 5 12.00～12.05 (100～90)
5/8～11UNC 15.875 2.3091 11 14.62～14.76(100～85) 8 14.58～14.67(100～90)
5/8～18UNF 15.875 1.4111 9 15.14～15.25 (100～80) 7 15.11～15.17 (100～90)

177 NINGBO NICHE TOOLS CO. LTD

RECOMMENDED DRILL HOLE SIZE FOR CUTTING TAPS

Metric Screw Threads

For JIS Class2 Drill Hole Dia
Specification (M) Standard Hole Dia
Max Min

M1 0.25 0.75 0.785 0.729

M1.1 0.25 0.85 0.885 0.829
M1.2 0.25 0.95 0.985 0.929
M1.4 0.3 1.1 1.142 1.075
M1.6 0.35 1.25 1.321 1.221
M1.7 0.35 1.35 1.421 1.321
M1.8 0.35 1.45 1.521 1.421
M2 0.4 1.6 1.679 1.567
M2.2 0.45 1.75 1.838 1.713
M2.3 0.4 1.9 1.979 1.867
M2.5 0.45 2.1 2.138 2.013
M2.6 0.45 2.2 2.238 2.113
M3 0.5 2.5 2.599 2.459
M3.5 0.6 2.9 3.01 2.85
M4 0.7 3.3 3.422 3.242
M4.5 0.75 3.8 3.878 3.688
M5 0.8 4.2 4.334 4.134
M6 1 5 5.153 4.917
M7 1 6 6.153 5.917
M8 1.25 6.8 6.912 6.647
M8 1 7 7.153 6.917
M9 1.25 7.8 7.912 7.647
M10 1.5 8.5 8.676 8.376
M10 1.25 8.8 8.912 8.647
M10 1 9 9.153 8.917
M11 1.5 9.5 9.676 9.376
M12 1.75 10.3 10.441 10.106
M12 1.5 10.5 10.676 10.376
M12 1.25 10.8 10.912 10.647
M12 1.0 11 11.153 10.917
M14 2.0 12 12.21 11.835
M14 1.5 12.5 12.676 12.376
M14 1.0 13 13.153 12.917
M16 2.0 14 14.21 13.835
M16 1.5 14.5 14.676 14.376
M16 1.0 15 15.153 14.917

[Link] 178
 RECOMMENDED DRILL HOLE SIZE FOR CUTTING TAPS

Unified Coarse Screw threads

For JIS Class2 Drill Hole Dia
Specification (UNC) Standard Hole Dia
Max Min

NO.1 -64 1.55 1.582 1.425

NO.2 -56 1.8 1.871 1.695
NO.3 -48 2.05 2.146 1.941
NO.4 -40 2.3 2.385 2.157
NO.5 -40 2.6 2.697 2.487
NO.6 -32 2.8 2.895 2.642
NO.8 -32 3.4 3.53 3.302
NO.10 -24 3.9 3.962 3.683
N0.12 -24 4.5 4.597 4.344
1/4 -20 5.1 5.257 4.979
5/16 -18 6.6 6.731 6.401
3/8 -16 8 8.153 7.798
7/16 -14 9.4 9.55 9.144
1/2 -13 10.9 11.023 10.592
9/16 -12 12.2 12.466 11.989
5/8 -11 13.6 13.868 13.386

Unified Coarse Screw threads

For JIS Class2 Drill Hole Dia
Specification (UNF) Standard Hole Dia
Max Min

NO.0 -80 1.25 1.305 1.182

NO.1 -72 1.55 1.612 1.474
NO.2 -64 1.85 1.912 1.756
NO.3 -56 2.1 2.197 2.025
NO.4 -48 2.4 2.458 2.271
NO.5 -44 2.7 2.74 2.551
NO.6 -40 2.9 3.022 2.82
NO.8 -36 3.5 3.606 3.404
NO.10 -32 4.1 4.165 3.963
NO.12 -28 4.6 4.724 4.496
1/4 -28 5.5 5.588 5.36
5/16 -24 6.9 7.035 6.782
3/8 -24 8.5 8.636 8.382
7/16 -20 9.90 10.033 9.729
1/2 -20 11.5 11.607 11.329
9/16 -18 12.9 13.081 12.751
5/8 -18 14.5 14.681 14.351

179 NINGBO NICHE TOOLS CO. LTD

RECOMMENDED DRILL HOLE SIZE FOR STI CUTTING TAPS

Metric Screw Threads

Drilling size Drilling size
Specification (M) Suitable Drill dia. Specification (M) Suitable Drill dia.
Max Min Max Min

ST2.5×0.45 2.6 2.65 2.6 ST10×1 10.25 10.42 10.3

ST2.6×0.45 2.7 2.75 2.7 ST10×1.25 10.31 10.52 10.4
ST3×0.5 3.12 3.2 3.15 ST 12×1.25 12.31 12.52 12.5
ST4×0.7 4.17 4.3 4.2 ST 12×1.5 12.37 12.62 12.5
ST5×0.8 5.16 5.33 5.2 ST14×1.5 14.37 14.62 14.5
ST6×1 6.25 6.42 6.3 ST16×1.5 16.37 16.62 16.5
ST8×1.25 8.31 8.52 8.4 ST18×1.5 18.37 18.62 18.5
ST10×1.5 10.37 10.62 10.5 ST20×1.5 20.37 20.62 20.4
ST12×1.75 12.43 12.73 12.5 ST20×2 20.47 20.83 20.5
ST14×2 14.49 14.83 14.5 ST22×1.5 22.37 22.62 22.5
ST16×2 16.49 16.83 16.5 ST24×1.5 24.37 24.62 24.5
ST18×2.5 18.58 19.04 19 ST24×2 24.47 24.83 24.5
ST20×2.5 20.58 21.04 21 ST27×1.5 27.33 27.56 27.4
ST22×2.5 22.58 23.04 23 ST30×1.5 30.37 30.62 30.5
ST24×3 24.7 25.25 25
ST27×3 27.65 28.05 27.8
ST30×3.5 30.76 31.2 31

Unified Coarse Screw threads

Drilling size Drilling size
Specification (U) Suitable Drill dia. Specification (U) Suitable Drill dia.
Max Min Max Min

STNO.2-56UNC 2.29 2.39 2.3 STNO.4-48UNF 2.97 3.05 3

STNO.3-48 2.64 2.74 2.7 STNO.6-40 3.66 3.78 3.7
STNO.4-40 2.95 3.07 3 STNO.8- 36 4.32 4.44 4.4
STNO.5-40 3.25 3.38 3.3 STNO.10- 32 4.98 5.13 5
STNO.6-32 3.66 3.81 3.7 ST1/4-28 6.53 6.71 6.6
STNO.8-32 4.32 4.47 4.4 ST5/16-24 8.2 8.38 8.2
STNO.10-24 5.05 5.21 5.1 ST3/8-24 9.78 9.96 9.8
STNO.12-24 5.61 5.77 5.7 ST7/16-20 11.43 11.63 11.5
ST1/4 - 20 6.63 6.78 6.7 ST1/2-20 13.03 13.26 13.1
ST5/16-18 8.33 8.48 8.4 ST9/16-18 14.66 14.88 14.7
ST3/8 - 16 9.91 1.11 10 ST5/8-18 16.26 16.48 16.3
ST7/16-14 11.51 11.75 11.5 ST3/4-19 19.43 19.68 19.5
ST1/2 -13 13.08 13.34 13.1 ST7/8-14 22.61 22.86 22.7
ST9/16-12 14.68 14.94 14.7 ST1-12 25.76 26.04 26

[Link] 180
 PITCH AND MAJOR DIAMETER CONVERSION TABLE

Conversion Table

Threads per inch(25.4mm) Pitch of Thread(mm)

100 0.254
80 0.3175
72 0.3528
64 0.3969
60 0.4233
56 0.4536
48 0.5292
44 0.5773
40 0.635
36 0.7056
32 0.7938
28 0.9071
24 1.0583
20 1.27
18 1.4111
16 1.5875
14 1.8143
13 1.9538
12 2.1167

Conversion Table

Specification (UNC) Inch Metric

NO. 0 0.06 1.524

1 0.073 1.854
2 0.086 2.184
3 0.099 2.515
4 0.112 2.845
5 0.125 3.175
6 0.138 3.505
8 0.164 4.166
10 0.19 4.826
12 0.216 5.486

181 NINGBO NICHE TOOLS CO. LTD

RECOMMENDED TAPPING SPEEDS & CALCULATION FORMULA

Tapping Speed

Work Material Forming Tap(v) Pointed Tap(V) Fluted Tap(V) (Straight Fluted Tap(V)

Low Carbon Stee C～0.2% 8～13 15～25 8～13 8～13

lMedium Carbon Steel C0.25%～0.40% 7～10 10～15 7～12 7～12
High Carbon Steel C0.45%～ 5～8 8～13 6～9 6～9
Alloy Steel SCM 5～8 10～15 7～12 7～12
Stainless Steel SUS 5～10 8～13 5～8 4～7
Copper CU 7～12 7～12 6～11 6～9
Brass - Brass Casting Bs · BsC 7～12 15～25 10～20 10～15
Bronze - Bronze Casting PB·PBC 7～12 10～15 7～12 7～12
Wrought Aluminum Alloy AL 10～20 15～25 10～20 10～20
Aluminum Alloy Casting AC· ADC 10～15 15～20 10～15 10～15
Zinc Casting ZDC 7～12 10～15 7～12 7～12

Calculation formulafor cutting conditions

Revolution(N) Feeding Speed Tapping Speed(V)

πdN
（M/min)
1,000V f·Z·N(D±d)
（rpm) （mm/min) V
πd F D 1,000

[Link] screw(-) D:Processing diameter(mm)

⒉Male screw(+) d:Tap diameter(mm)
[Link] speed of TIN coated tap can increase by 30%. z:Feed times
[Link] speed should reduce by 20-30% when tapping depth > =2D. f:Amount of feed(mm)
V:Tapping speed(m/min)
N:Revolution(rpm)
π:3.1415

[Link] 182
 TECHNICAL INFORMATION

The dfferene between forming taps and cutting taps

forming taps Feature comparison

forming taps make treads through cold extrusion

★no cutting, no chip remaoval problem
★improved the thread surface quality Cutting taps
★increased the cutting speed(2 times)
★increased the taps' life

forming taps
forming tap limited by workpiece material
★Brittle materials(l.e Grey cast iron)are not
suitable
★Remark: The drill hole for forming taps
should be bigger than machine taps

thread comparison Extrusion forming diagram

Extrusion molding Cutting molding

Crystal fiber have not Crystal fiber have been

been destroyed destroyed

extrusion molding example normal extrusion thread when bottom hole is reasonable

unfinished thread when bottom hole is too big bad thread when bottom hole is too small

183 NINGBO NICHE TOOLS CO. LTD

TROUBLE SHOOTING

The main problem ,reason and slove way while tapping

NO. PROBLEM REASON SOLUTION
1. The bottom hole is too small 2. Taps quality is not good 1. Increase bottom hole diameter 2. Choose better taps
3. Drilling depth is not enough when tapping in blind hole 3. Increase drilling depth 4. Reduce tapping
Taps broken 4. Tapping speed is too fast speed
1 5. The taps and bottom hole’ s shaft is different 5. Calibration fixture, choose float tapping chuck
6. The workpiece material is not stable, some parts have 6. Choose better material
airhole and the hardness is different 7. Improve sharpness of cutting edges
7. Excessive tapping torque 8. Chip packing 8. xtra chip room

Taps gear 1. Taps quality is not good 1. Choose better taps

2
demaged 2. Cutting speed is not suitable 2. Choose suitable cutting speed
1. Reduce tapping speed
1. Tapping speed is too high 2. Taps quality is not good
2. Choose better taps
3 Taps’ abrasion 3. Cutting fluid is not suitalbe 4. Workpiece’
s hardness is too high 3. Choose good lubricity cutting fluid
is fast 4. Workpiece proper heat treatment or change the tap material.

1. Choose proper accuracy 2. Choose proper cutting fluid

1. Taps accuracy is not suitable 2. Cutting fluid is not suitable
3. Reduce cutting speed
3. Tapping speed is too high
4 Thread diameter 4. The taps and bottom hole’ 4. Calibration fixture, choose float tapping chuck
s shaft is different
is too big 5. Choose suitable taps and coating
5. Taps stick crumbs 6. Burr in tap grinding
6. Reduce number of flutes to provide extra chip room.
7. The machine spindle swinging too big 8. Cutting edges too sharp
7. Select taps with blunt cutting edge.

Pitch diameter 1． Taps’accuracy is not suitable 2． Cutting fluid is not suitable 1. Choose proper accuracy
5 is too small 3．Shape of tapping material: Hollow materials and mild sheet steels with 2. Choose good lubricity’s cutting fluid
punched holes which have “a spring back” action after tapping. 3. Select bigger tap limit

1. Choose better taps

Thread surface [Link]' quality is not good [Link] workpiece is too soft
2. Do heat treatment to improve workpiece hardness
6 is not smooth , [Link] fluid is not suitable [Link] speed is too high 3. Choose good lubricity’
s cutting fluid
wavy [Link]-over chips after drilling 4. Reduce cutting speed [Link] chips before

The main problem ,reason and slove way while tapping

PROBLEMS REASONS SOLUTIONS IF NEED TO VERIFY TAPS OR NOT
Unsuitable taps 1. No need to verify taps，check if taps
1. Choose suitable accuary taps
match with crafts

Tap and plug do 1. Choose suitable taps and plug gauge (eg: taps RH7 should 1. No need to verify taps, check taps and
not match match plug gauge 6H) plug’
s label

1. Choose spiral flute taps、point taps

2. Choose less chip flutes , bigger capacity taps 1. According to current crafts ,no need to
3. Increase bottom hole diameter consider verification，Only new crafts
Cutting jam 4. Increase bottom hole diameter when tapping blind hole
The inner thread happem similar case
5. Change cutting fluid types and watering way
pitch diameter is too
big（gauge no go-
end all go through) 1. Motify cutting speed
2. Avoid taps and bottom hole in different shaft
3. Taps or cutting material adopt floating fixed mode 1. The present condition is suitable and
Unsuitable 4. Adopt proper cutting speed to avoid excessive cutting these factors can be verified one by
processing 5. Using forced feeding method
6. Choose suitable processing machine one, no need to verify taps
condition
7. To prevent the tap vibration

1. Choose oxidation treated or other kind of treated taps 1. No need to verify taps, require operator to
2. Choose good anti adhesion’s cutting fluid
bond 3. Reduce cutting speed check taps regularly

Other factors
The upper, down, 1. Through hand tapping to check if taps
1. The match gap between non screw feeding machine’s and the
are normal but
on both sides of
splined shaft need to be checked regularly, to reduce the can process qualified thread
gauge no go- end
the tap thread resistance or spindle feed rate
side together 2. Change processing station and part to
all go through 2. Screw feeding machine need to be motified periodically and
removal of check the gap between screw and screw nut check if taps can process qualified
excess material thread
Unsuitable taps 1. Choose bigger size taps
The inner thread is 2. Choose suitable taps structure
too small（gauge
go-end can’t go
Internal thread 1. Choose suitable reversal recede speed
scratch
through ）
Remain chips in 1. Improve taps sharpness ,avoid appearing whisker chips
internal thread 2. After remove all chips out, then check by plug gauge

Because the taps chuck’s total weight and

Other factors are
machine shaft have a force effect on taps, lead Tapping the thread hole
normal but gauge
tap teeth type extrusion deformation or mash, again by hand
go-end can’t go
so gauge go-end can’ t go through
through

[Link] 184
 LUBRICANTS

Tapping Paste Tapping Oil

Features
Containing efficient additives, good wear resistance and extreme pressure, extend cutting tools’life, excellent cooling
performance.

Instrution
[Link] normally machining, using 5-10 times tapping oil to dilute spindle oil, for heavy duty machining, using2-5 times
tapping oil to dilute spindle oil.
[Link] way: dripping, circylating or brushing.

Function
[Link] metal cutting(oily).
[Link] for stainless steel, steel, copper drilling reaming tapping and milling expecially suitable for thread
processing.
[Link] grease is yellow in normal temperature, flash point aboce 190 ° C.
[Link] oil is brown liquid in normal temperature flash point aboce 200° C.
[Link] insolubility.

Precautions
[Link] brush to brushing grease on taps, when the viscosity is high, please use a little of engine oil or insolubility
cutting oil and fully mixing, dilution, using in Suitable coneentraion.
[Link] clean it, please use lye or kerosen(do not use acid).

185 NINGBO NICHE TOOLS CO. LTD

TAPS

MEMO

[Link] 186
 ®

ADDRESS
ROOM 1601, NO. 399 MINHE ROAD, ZHENHAI,
NINGBO CHINA, 315202

GET IN TOUCH
PHONE: +86 574 8659 2189 FAX: +86 574 8659 3892

NTOOLS2017@[Link] [Link]

@2023 NINBO NICHE TOOLS CO. LTD. ALL RIGHTS RESERVED. NT-22-1002-EN