ASCE Hazards Report
Address: Standard: ASCE/SEI 7-22 Latitude: 39.78905
No Address at This Location Risk Category: IV Longitude: -90.357575
Soil Class: D - Stiff Soil Elevation: 601.5584041842516 ft
(NAVD 88)
Wind
Results:
Wind Speed 120 Vmph
10-year MRI 75 Vmph
25-year MRI 82 Vmph
50-year MRI 87 Vmph
100-year MRI 92 Vmph
300-year MRI 101 Vmph
700-year MRI 108 Vmph
1,700-year MRI 115 Vmph
3,000-year MRI 120 Vmph
10,000-year MRI 129 Vmph
100,000-year MRI 148 Vmph
1,000,000-year MRI 167 Vmph
Data Source: ASCE/SEI 7-22, Fig. 26.5-1D and Figs. CC.2-1–CC.2-4, and Section 26.5.2
Date Accessed: Fri Mar 08 2024
https://ascehazardtool.org/ Page 1 of 8 Fri Mar 08 2024
Value provided is 3-second gust wind speeds at 33 ft above ground for Exposure C Category, based on linear
interpolation between contours. Wind speeds are interpolated in accordance with the 7-22 Standard. Wind speeds
correspond to approximately a 1.6% probability of exceedance in 50 years (annual exceedance probability =
0.00033, MRI = 3,000 years). Values for 10-year MRI, 25-year MRI, 50-year MRI and 100-year MRI are Service
Level wind speeds, all other wind speeds are Ultimate wind speeds.
Site is not in a hurricane-prone region as defined in ASCE/SEI 7-22 Section 26.2.
https://ascehazardtool.org/ Page 2 of 8 Fri Mar 08 2024
Seismic
Site Soil Class: D - Stiff Soil
Results:
PGA M : 0.13 TL : 12
S MS : 0.36 SS : 0.29
S M1 : 0.25 S1 : 0.12
S DS : 0.24 V S30 : 260
S D1 : 0.16
Seismic Design Category: D
Multi-Period MCER Spectrum Multi-Period Design Spectrum
Sa (g) vs T(s) Sa (g) vs T(s)
Two-Period MCE R Spectrum Two-Period Design Spectrum
Sa (g) vs T(s) Sa (g) vs T(s)
MCER Vertical Response Spectrum Design Vertical Response Spectrum
Vertical ground motion data has not yet been made Vertical ground motion data has not yet been made
available by USGS. available by USGS.
https://ascehazardtool.org/ Page 3 of 8 Fri Mar 08 2024
Data Accessed: Fri Mar 08 2024
Date Source:
USGS Seismic Design Maps based on ASCE/SEI 7-22 and ASCE/SEI 7-22 Table 1.5-2. Additional data for
site-specific ground motion procedures in accordance with ASCE/SEI 7-22 Ch. 21 are available from USGS.
https://ascehazardtool.org/ Page 4 of 8 Fri Mar 08 2024
Ice
Results:
Ice Thickness: 1.94 in.
Concurrent Temperature: 5F
3-s Gust Speed 44 mph
Data Source: Standard ASCE/SEI 7-22, Figs. 10-2 through 10-8
Date Accessed: Fri Mar 08 2024
Ice thicknesses on structures in exposed locations at elevations higher than the surrounding terrain and in valleys
and gorges may exceed the mapped values.
Values provided are equivalent radial ice thicknesses due to freezing rain for 250, 500, 1,000, and 1,400-year
mean recurrence intervals along with concurrent 3-s gust speeds and concurrent air temperatures. The shading
indicates special icing regions, with elevations above 2,100 ft (640 m) in the east, 6,000 ft (1829 m) in the west,
and 1,600 ft (488 m) in Alaska, with sparse weather station data for determining design ice loads. In these regions,
as well as in regions with complex terrain causing unusual icing conditions and regions where snow or in-cloud
icing results in larger loads, the mapped values should be adjusted based on a combination of local historical
records and experience, reanalysis data, and numerical weather prediction systems.
Snow
Results:
2
Ground Snow Load, pg : 35 lb/ft
20-year MRI Value: 10.72 lb/ft^2
Winter Wind Parameter: 0.55
Mapped Elevation: 592.1 ft
Data Source: ASCE/SEI 7-22, Figures 7.6-1 and 7.6-2 A-D
Date Accessed: Fri Mar 08 2024
Values provided are ground snow loads. In areas
designated "case study required," extreme local
variations in ground snow loads preclude mapping at this
scale. Site-specific case studies are required to establish
ground snow loads at elevations not covered.
Snow load values are mapped to a 0.5 mile resolution.
This resolution can create a mismatch between the
mapped elevation and the site-specific elevation in
topographically complex areas. Engineers should consult
the local authority having jurisdiction in locations where
the reported ‘elevation’ and ‘mapped elevation’ differ
significantly from each other.
2
Ground Snow Loads for IRC only, pg(asd) : 24.5 lb/ft
https://ascehazardtool.org/ Page 5 of 8 Fri Mar 08 2024
Rain
Results:
15-minute Precipitation Intensity: 7.58 in./h
60-minute Precipitation Intensity: 3.88 in./h
Data Source: NOAA National Weather Service, Precipitation
Frequency Data Server, Atlas 14(https://
www.nws.noaa.gov/oh/hdsc/)
Date Accessed: Fri Mar 08 2024
Tornado
Results:
https://ascehazardtool.org/ Page 6 of 8 Fri Mar 08 2024
Data Source: ASCE Tornado Geodatabase
Date Accessed: Fri Mar 08 2024
https://ascehazardtool.org/ Page 7 of 8 Fri Mar 08 2024
The ASCE Hazard Tool is provided for your convenience, for informational purposes only, and is provided “as is” and without
warranties of any kind. The location data included herein has been obtained from information developed, produced, and maintained
by third party providers; or has been extrapolated from maps incorporated in the ASCE standard. While ASCE has made every effort
to use data obtained from reliable sources or methodologies, ASCE does not make any representations or warranties as to the
accuracy, completeness, reliability, currency, or quality of any data provided herein. Any third-party links provided by this Tool
should not be construed as an endorsement, affiliation, relationship, or sponsorship of such third-party content by or from ASCE.
ASCE does not intend, nor should anyone interpret, the results provided by this Tool to replace the sound judgment of a competent
professional, having knowledge and experience in the appropriate field(s) of practice, nor to substitute for the standard of care
required of such professionals in interpreting and applying the contents of this Tool or the ASCE standard.
In using this Tool, you expressly assume all risks associated with your use. Under no circumstances shall ASCE or its officers,
directors, employees, members, affiliates, or agents be liable to you or any other person for any direct, indirect, special, incidental, or
consequential damages arising from or related to your use of, or reliance on, the Tool or any information obtained therein. To the
fullest extent permitted by law, you agree to release and hold harmless ASCE from any and all liability of any nature arising out of or
resulting from any use of data provided by the ASCE Hazard Tool.
https://ascehazardtool.org/ Page 8 of 8 Fri Mar 08 2024
