PART -1- CHOOSE THE BEST ANSWER

1, ----------------is the central working part of reciprocating engine or pump the space in w/c a piston
travels.

A, solenoids B, cylinder C, proximity sensor D, non

2, w/c one of the following is in input PLC?

A, solenoids B, transistor C, indictors D, bell

3, one bar (1 bar) is equal to

A, 20N/M B, 14.5 psi C, 100kpa D, B&C

4, mechanical actuated switch

A, push button B, Selector switch C, limit switch D, all

5, w/c one the following is uni- direction thyristors.

A, SCR B, Triac C, diode D, all

6, thermocouple is used to measure

A, Temperature B, Pressure C, flow D, non

7, w/c one the following is does not change in transformer.

A, current b, voltage c, frequency d, all of the above

8, a transformer core is laminated to

A, reduce hysteresis loss B, reduce eddy current loss

C, reduce copper loss D, reduce all of the above

9, true power is expressed by

A, KW (W) B, KVA (VA) C, KVAR (VAR) D NONE

10, when the problem of electrical material exists above your capacity what are you going to do?

A, measuring B, crying C, ask assistance for help D, through the material

11, primary transformer is connected with

A, the load B, the source C, A&B

12, secondary transformer concocted to

A, the load B, the source C, None

13, ______is a type of switch that is specially designed to detect machine motion
 A, limit switch B. frequency drive C. solenoids D. magnetic contactor

14, ________is the simplest type sensor is the limited switch

A, photo sensor B. frequency drive C. limit switch D. all

15, _______is represents an extremely important use of magnetic in mechanical

A. limit switch B. transducers C. solenoids D. proximity sensor

16, a device that convert one form of energy in to another is called______

A, terminal lugs B. transducers C, solenoids D,all

17, _________are essential elements in the of actuators

A, speed transducer B, Positioned sensor C, pressure transducer D. thermo couple

18, _____is cylinders do works in one way

A, double acting B, single acting C. A&B D,none

19, which one of the following is not disadvantage of PLC

A. High initial cost B, high possessing speed C, no uniform language

20, A machine which takes an air gas or vapors at a certain pressure and drives the fluids at high

A, compressor B, fan C, pump motor D, none

21, which one of a PLC element is computer where ladder logic is stored and pressed

A, CPU B, I/O C, power supply D, all

22, in PLC control system, motor is _________

A, have their own control relay B. can be powered directly from PLC out put

C, A&B D, all

23, the continuous nature of inputs makes them very sensitive to noise

A, digital input B analogue input

24, temperature detector

A. ATD B, thermo couple C. photo diode D.A&B

25, resistivity of a conductor mostly affected by

A. current B. pressure C, temperature D. flow

26, the starting winding of signal phase motor is inserted in the

A, stator B, rotor C, armature

27, the resistance value of color brown, black, red, and gold.
 A, 1000Kohm B, 1Kohm C, 10000Kohm D, 5ohm

28, --------- is an instruments w/c measure the installation resistance of an electrical relatively to earth
and one other.

A.tangent galvano meter b. current transformer c. megger d. none of the above

29. The transformer has primarily winding of 100 turns and 400 volt in secondary 250v in primary
winding.

A. 1600 b. 800 c. 1000 d. 750

30. When three identical resistors connected in parallel what is the result?

A. 1/3 times the individual resistance B. 2/3 times the individual resistance

C. 5/2 times the individual resistance D. 3 times the individual resistance

31. in open loop control system

A. output is independent of control input B.Output is dependent on control input

C. only system parametershave effect on control output D. none of the above

32. Which one of the following is written communication?

A. negotiation B. discussion C. instruction D. speech

33. The function of shunt in ammeter is to

A. by pass the current B. increase the sensitivity of the ammeter

C. increase the resistance of the ammeter D. none of the above

34. The multiplier’s and the meters coilvolt meters are in

A, series B. parallel C. Series - parallel D. none of the above

35. In squirrel cage induction motor, the rotor slots are usually given slight skew in order to

A, reduce winding loses B. reduce accumulation of dirt and dust

C. reduce eddy current D. reduce magnetic hum

36. The starting torque of squirrel cage induction motor is

A, low B. negligible C. same as full load torque D, slightly more than full load torque

37. An induction motor with 1000r.p.m speed will have

A. 8 poles B. 6 poles C. 4 poles D. 2poles

38. If the capacitor of a single –phase motor is short circuited

A. the motor will not start B. the motor will run in reverse direction
C. the motor will run in the same direction at reduce level r.p.m

39, which of the following motor is inherently self-starting?

A. split motor B. shaded pole motor C. reluctance motor D. none of the above

40, a transformer transfers

A. voltage B. Current C. power D. Frequency

41. The transformer rating are expressed in terms of

A. volts B. amperes C. KW D. KVA

42. Intransformer the resistance b/n P and S is

A. zero B. 1 ohm C. 1000 ohm D. infinite

43, open circuit on transformer is conducted to determine

A, Hysteresis loss B, copper loss C, core loss D, eddy current loss

44, what terms describe the maximum Expected error associated with a measurement or sensor?

A, Precision B, range C, Accuracy D, resolution

45, w/c one of the following is correct step PLC system.

A, self-test -----input scan ---------logic scan----- out put scan

B, input scan----- logic scan----- self-test-----out put scan

C, logic scan----- input scan---- self-test----- out put scan

D, input scan---- self-test------- logic scan------ output scan

46, one of the following is input of PLC.

A, speed B, light C, solenoid valve actuator D, leading

47, 100 power factor

A, zero B, unity D, lagging D, leading

48, star –delta connection the star connection used to

A, Voltage reduce to stator B, Voltage reduce to stator

B, Current reduce to stator D, all

49, w/c the one the following is constant in series circuit?

A, voltage B, current C, Power D, Resistance

50,Sl unit of flow rate

A, GPM B, JPM C, A & B

51, one of from the following cylinder can produce wok in two direction.

A, single acting cylinder B, double acting cylinder

52, ------------- is used to remove small particle from the air.

A, lubricator B, filter C, silencer D,all

53, an electronic device acts as switching model.

A, capacitor B, transistor C, diode D, resistor

54, what is the advantage of preventive maintenance?

A, to increase the quality of the material C, to improve the down time

B, to increase the reliability of the material D, to reduce the life span of the material

55,apparent power is expressed by.

A, KW (W) B, KVA (VA) C, KVAR (VAR) D NONE

56, one of from the following element of pneumatic system is used to decrease the noise of air in the
out let of valve.

A, lubricator B, filter C, silencer D, all

57, Type of valve w/c allows fluid to flow through it from one of two input source.

A, shuttle valve B, OR gate C, two pressure valve D, A&B

58, The OR function implemented using contact connected in series.

A, true B, false

59, the responsibility to make the quality of product.

A, the quality assurance officer C, all tram member

B, worker D, leader

60, after completion of rewinding.

A, full load test B, low voltage test C, ventilation test D, for ward reverse test

61, Reactive power is expressed by

A, KW (W) B, KVA (VA) C, KVAR (VAR) D NONE

PART II match

AB

1, step down transformerA, coil

2, step up transformer B, OR gate

3, y=A.B C, AND gate

4, Y=A+B D, 2:1

5, convert from chemical energy to electric energy E, 1:2

6, convert from mechanical energy to electric energy F, motor

7, convert from electrical energy to mechanical energyG, Generator

8, protect the motor from damage due to over loading H, Thermal relay

9, the device that is output of PLCI, indicating circuit

10, the device that used to correct the power supply J, capacitor bank

11, a device that detect physical variable K, Diode

12, a device w/c change physical quantity to electrical L, inverter

13, Induction motor is similar with M, transistor

14, current line in star N, Transducer

15, line voltage in delta O, sensor

P, DC motor

Q, Battery

R, transformer

S,equal to phase voltage

T, equal to phase current

PART -1- CHOOSE THE BEST ANSWER
1, transformer transfers
A, voltage B, current C, voltage and current D, power
2, ---------- is a device that convert a reading from sensor or transducer into a standard signal and
transmits that signal to a monitor or controller.
A, converter B, transmitter C, transducer D, actuator
3, operated contactless (non –contact switch) and with feedback external mechanical actuated force.
A, limit switch B, proximity switch C, pedal switch D, all
4, a type of sensor it’s sensitive for magnetic material only.
A, optical sensor B, read switch C, capacitive switch D, inductive switch
5, a type of sensor it’s sensitive for non-magnetic material only.
A, optical sensor B, read switch C, capacitive switch D, inductive switch
6, ---------- is the part of final control device that causes physical change in the final control device when
a signal close.
A, converter B, transmitter C, transducer D, actuator
7, in star-delta reduce voltage starting method.
A, voltage is reduced to rotor B, voltage is reduced to stator
C, current is reduced D, current is reduced to stator

8, to treatment skin burn

A, to apply alcohol B. to apply oil C. apply cool water D. cool apply tooth
9, Based on the electrons flow of electrons?
A, Positive to negative B. negative to positive C. line to line
10, one of the following device can be used to isolate the control ckt from the load.
A, Relay B. circuit breaker C. rotary switch D. toggle switch
11, the basic of operation of transformer is the effect of
A, Self – inductance C, Coupled – inductance
B, Mutua – inductance D, Decoupled – inductance
12,which one of the following is the same value in parallel connection?
A.Voltage B. resistor C. current D. capacitor
13, in star-delta three phase motor. Which among the group is the correct pair of terminals
connection?
A, W2 & W1 for L1 V1 & U2 for L2 W2 & V2 for L3
B, U1& U2 for L1 V1 & V2 for L2 W1 & V2 for L3
C.U1& V2 for L1 V1 & W2 for L2 W1 & U2 for L3
D.U2 & V2 for L1 V1 & W1 for L2 U1 & W2 for L3
E.V1 & W2 for L1 V1 & U1 for L2 W1 & U2 for L3
14,Shuttle valve “OR” function is

A B . C. D
15,Two Pressure valve “AND” function is

A. B. C. D.

16, which one is advantages of PLCs?

A, Small physical size than hard-wire solutions.
B, Easier and faster to make changes.
C, PLCs have integrated diagnostics and override functions.
D, Diagnostics are centrally available.
E, All
17,Based on EEPCO standard, what color of wire is used for the neutral conductor in a three-
phase power supply?
A. Blue B. White C. red D. green-yellow E. black
18, an auto transformer has
A, more turns on the primary than on the secondary
B, more turns on the secondary then on the primary
C, Only one winding
D, More than one winding
19,the efficiency of an electrical machine is:
A, The ratio between output power and input power
B, The ratio between active power and apparent power
C, The ratio between starting torque and maximum torque
D, The ratio between rotor speed and rotation field speed
20 ---------- Refer to the limit with in w/c a signal can be read and may be somewhat subjective.
A, precision B, sensitivity C, resolution D, repeatability
21, -------- is the smallest amount of variable that in instrument can resolve.
A, precision B, sensitivity C, resolution D, repeatability
22, an electrical measuring instrument that can display the electrical signal
directly.
A,Multimetre B, signal generator C, oscilloscope D, none
23, Which DC motor has approximately constant speed?
A.Shunt DC B. Series DC C. Composed DC D. All
24, open loop control system
A, a control system is independent of the output B, it is not self –correcting
C, a control system without feedback D, all
25, a zener diode is used as ----
A, amplifier B, a rectifier C, voltage regulator D, none
26, when using a standard multimetre to measure AC voltage, what type of measurement will the
multimetre indicate?
A, peak-peak value B, peak C, V max D ,rms
27, unlike poles of magnets
A, repel each other B, attract each other
C, have no effect each other D, point north

PART-II: - MATCHING

1, high starting torqueA.

2. Washing machine B.

C,

D,
E,Memory

3. Machine F,

4. to store program G.

5. Limit current H.
6. Smoking detector I. shunt motor
7. Current transformer J. dc series motor
8. Voltage transformer
• 9.pushbutton