GB Technical Data Sheet
Page 1 of 4
Ultramat®
UFM-D30 / UFM-D30HP / UFM-D130
Condensate drain without compressed air loss
Product description:
The UFM-D’s are compressed air zero- The electronic control of the drain mon- Applications:
loss, electronically controlled conden- itors the proper operation continuously.
sate drains. Automatic malfunction routines and a Compressed air zero-loss draining of
The large internal cross-sections for potential free contact for remote control condensate at:
draining ensure reliable operation even ensures safe operation at all times. You
when dealing with dirty, particle polluted can react to malfunctions before they - compressors
condensate: are obvious by condensate water in the - aftercoolers
Less downtime, less trouble and more compressed air line at the point of use!
- receiver-vessels
safety for the application - especially in
direct comparison with time- or float - pre- and after-filters of fridge dryers
controlled drains. - pre-filters of adsorption dryers
- condensate- and oil-removal filters
Additionally the condensate becomes
- pipe bends
less emulsified – when compared with
time controlled solenoid valves. Less
emulsification and better function of oil/
water separators: longer compliance
with legal discharge limits, less running
costs!
As there is no air-loss whilst purging
these drains work silent – a very impor-
tant feature when this drain is installed
within a working area!
Technical alterations reserved (R01/ 2011/01/04)
Donaldson Filtration Deutschland GmbH · Industrial Filtration Solutions · Büssingstraße 1 · D-42781 Haan · Telefon +49/21 29/569-0 · Telefax +49/21 29/569-100
GB Technical Data Sheet
Page 2 of 4
Features: Benefits: Materials:
Top (thread) Aluminium,
Electronically level-controlled No expensive compressed air losses, conden-
KTL coated
sate drain depending upon resulting condensate
amount, sensor detects each kind of condensa-
te (also pure oil), also in case of strong contami-
nation the draining works problem-free
Potential free contact:
Electronic conrol Permanent function control via LED display,
automatic emergency programs in the alarm Connection data
< 250 V / < 1A
mode, potential-free alarm contact function test AC
via test button Connection data
> 5 VDC / > 10 mA
Generously dimensioned cross Easy maintenance, small inclination to emulsifi- DC
sections cation, small noise during draining procedure,
insensitive to dirt
Materials corrosion resistant Aluminum corrosion-resistant, glass-fiber rein- Option:
forced plastics steadily against oil-contaminated
and oil-free condensate (special equipments for Heater 24 V; 110 V; 230 V
particularly aggressive condensate available)
Insulation cover
Condensate inlet vertically or Flexible and easy montage on different pipings
horizontal possible Bracket
Technical Data D30 D30HP D130
min./max. operating pressure 0,8 - 16 bar (12-230 psi) 0,8 - 40 bar (12-580 psi) 0,8 - 16 bar (12-230 psi)
min./max. temperature +1°C / +60°C (+34°F / +140°F)
Condensate inlet 2 x G 1/2 (1/2”) 3 x G 3/4 (3/4”)
Condensate outlet G 1/2 - a (di = 13 mm / 1/2”) G 3/8 - i G 1/2 - a (di = 13 mm / 1/2”)
Condensate oil contaminated + oil free
Weight (empty) 2,0 kg (4.4 lbs) 2,9 kg (6.4 lbs)
max. compressor performance 1) 30 m3/min (1,060 scfm) 130 m3/min (4,590)
max. fridge dryer performance 1) 60 m3/min (2,120 scfm) 260 m3/min (9,180 scfm)
max. filter performance 1) 300 m3/min (10,600 scfm) 1300 m3/min (45,900 scfm)
Supply voltage (see type plate) 230 / 115 / 24 VAC ± 10%, 50-60 Hz / 24 VDC -10/+25%
Power consumption P < 2,0 VA (W)
Recommended cable-jacket diameter Ø 5,8 - 8,5 mm (0.23” - 0.34”)
Recommended wire cross-section 3x 0,75 -1,5 mm2 / 5 x 0,25 mm2
Recommended fusing 0,5 A medium time-lag (AC) / 100 mA medium time-lag (DC)
Protection class IP 65
1) Max. performance for ambient temperature 20°C. 50% r. h.
GB Technical Data Sheet
Page 3 of 4
Dimensions
UFM-D30
mm (inch)
UFM-D30HP
mm (inch)
GB Technical Data Sheet
Page 4 of 4
Dimensions
UFM-D130
mm (inch)
