SPECIFICATION 426/436 WHEEL LOADER

STATIC DIMENSIONS – HT (HIGH-TORQUE)

J F

H1 B C D

H A

426 HT 426 HT HL 426 ZX 436 HT 436 HT HL 436 HT SHL 436 ZX

A Overall length mm 6831 7244 6831 6926 7282 7726 7169
B Axle to pivot pin mm 1096 1509 1096 1143 1499 2366 1143
C Wheel base mm 3000 3000 3000 3000 3000 3000 3000
D Axle to counterweight face mm 1816 1816 1816 1816 1816 1816 1816
E Minimum ground clearance mm 442 442 442 459 459 459 459
F Height over exhaust mm 3236 3192 3192 3192 3192 3192 3192
G Width over cab mm 1400 1400 1400 1400 1400 1400 1400
H Width over tyres mm 2482 2482 2482 2597 2597 2597 2597
H1 Wheel track mm 1955 2070 1955 2070 2070 2070 2070
J Height over cab mm 3335 3335 3335 3335 3335 3335 3335
Pin height (maximum) mm 3906 4336 3906 3996 4650 5213 3996
Overall operating height mm 5095 5525 5095 5305 5959 6522 5305
Front axle weight kg 5574 5869 5830 6013 7133 7968 6456
Rear axle weight kg 7126 7101 7020 8490 7860 7577 8466
Total weight kg 12700 12970 12850 14503 14993 15545 14922
Inside radius mm 2920 2825 2920 2825 2825 2825 2825
Maximum radius over shovel mm 5790 5985 5790 5860 6000 6196 5900
Articulation angle degrees ± 40° ± 40° ± 40° ± 40° ± 40° ± 40° ± 40°
426 data based on machine equipped with pin mounted 1.9m3 bucket with toe plates and Michelin 20.5 R25 XHA2 (L3) radial tyres.
436 data based on machine equipped with pin mounted 2.4m3 bucket with toe plates and Michelin 20.5 R25 XHA2 (L3) radial tyres.
 426/436 WHEEL LOADER SPECIFICATION

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

426 HT Standard arms HI LIFT arms Dimensions
Op weight STL FTTL STL FTTL Vertical Width N
Tyre size Manufacturer Type Rating kg kg kg kg kg mm mm
20.5 - 25 (crossply) Firestone SGG L2 -348 -245 -215 -204 -179 -9 +5
20.5 - 25 (crossply) Goodyear SGL D/L L2 -216 -152 -134 -126 -111 -9 +5
20.5 R 25 (radial) Goodyear RL - 2 + L2 +76 +54 +47 +45 +39 -9 +5
20.5 R 25 (radial) Bridgestone VUT L2 -160 -113 -99 -94 -82 0 0 M
20.5 R 25 (radial) Michelin XTLA L2 -160 -113 -99 -94 -82 -9 +5
20.5 R 25 (radial) Bridgestone VMT L3 0 0 0 0 0 0 0 T
550/65 R 25 (radial) Michelin XLD L3 -120 -85 -75 -71 -62 0 0
Q
20.5 R 25 (radial) Michelin XRD1A L4 +332 +257 +206 +214 +171 +29 +8
20.5 R 25 (radial) Michelin XMINED2 L5 +680 +480 +421 +399 +350 +29 -3 R
20.5 R 25 (radial) Goodyear RL-5K L5 +600 +423 +372 +352 +310 +29 -3 O
620/75 R25 (radial) Michelin MEGA XBIB -107 -75 -67 -62 -56 +62 +258 S P
20.5R25 (radial) JCB Earthmover L3 128 90 78 77 47 41 12
20.5-25 (crossply) JCB Sitemaster L3 100 70 61 60 37 21 -7
Optional additional bolt-on counterweight +380 +707 +598 +604 +513 0 0

LOADER DIMENSIONS – 426 HT

Assumes the machine is fitted with 1.9m³ shovel with toeplates and Michelin 20.5R25 XHA (L3) tyres.
Model 426 HT – STANDARD HEIGHT ARM 426 HT – HI LIFT ARM
Bucket mounting Direct Quickhitch Direct Quickhitch
Bucket type General purpose General purpose
Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate
Bucket capacity (SAE heaped) m3 1.8 2.0 1.9 2.1 2.4 2.7 1.8 2.0 1.9 2.1 2.4 2.7 1.8 2.0 1.9 2.1 2.4 2.7 1.8 2.0 1.9 2.1 2.4 2.7
Bucket capacity (struck) m3 1.556 1.765 1.616 1.830 2.057 2.346 1.554 1.749 1.594 1.787 2.057 2.346 1.556 1.765 1.616 1.830 2.057 2.346 1.554 1.749 1.594 1.787 2.057 2.346
Bucket width mm 2550 2550 2550 2550 2700 2700 2550 2550 2550 2550 2700 2700 2550 2550 2550 2550 2700 2700 2550 2550 2550 2550 2700 2700
Bucket weight kg 810 850 810 850 1136 1211 800 850 800 850 1136 1211 810 850 810 850 1136 1211 800 850 800 850 1136 1211
Maximum material density kg/m3 2332 2068 2209 1969 1655 1439 2125 1884 2013 1794 1508 1311 1947 1726 1844 1644 1381 1201 1774 1573 1681 1498 1260 1095
Tipping load straight kg 9819 9797 9819 9797 9334 9147 8983 8859 8983 8859 8554 8384 8199 8180 8199 8180 7794 7638 7501 7397 7501 7397 7142 7000
Tipping load full turn kg 8396 8271 8396 8271 7944 7774 7650 7537 7650 7537 7243 7085 7010 6906 7010 6906 6633 6491 6388 6293 6388 6293 6048 5916
Payload kg 4198 4136 4198 4136 3972 3887 3825 3768 3825 3768 3621 3542 3505 3453 3505 3453 3316 3245 3194 3146 3194 3145 3024 2958
Maximum break out force kN 138 128 138) 128 123 115 121 113 121 113 106 99 138 128 138 128 123 115 121 113 121 113 106 99
M Dump angle maximum degrees 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
N Roll back angle full height degrees 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58°
O Roll back at carry degrees 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 50° 50° 50° 50° 50° 50° 50° 50° 50° 50° 50° 50°
P Roll back at ground level degrees 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48°
Q Load over height mm 3627 3627 3612 3612 3610 3610 3627 3627 3612 3612 3610 3610 4057 4057 4042 4042 4040 4040 4057 4057 4042 4042 4040 4040
R Dump height (45° dump) mm 2817 2767 2944 2896 2860 2796 2697 2647 2848 2775 2739 2676 3247 3197 3374 3326 3290 3226 3212 3127 3278 3205 3169 3106
S Dig depth mm 50 50 47 47 47 47 50 50 47 47 47 47 113 113 110 110 110 110 128 113 110 110 110 110
T Reach at dump height mm 1071 1121 946 99 1028 1092 1191 1240 1052 1118 1149 1213 1233 1983 1108 1158 1190 1254 1244 1253 1214 1280 1311 1375
Pin height mm 3876 3876 3876 3876 3876 3876 3876 3876 3876 3876 3876 3876 4306 4306 4306 4306 4306 4306 4306 4306 4306 4306 4306 4306
Reach maximum (45° dump) – horizontal arm mm 1818 1868 1693 1743 1775 1839 1938 1987 1800 1865 1896 1960 2166 2216 2041 2091 2123 2187 2177 2286 2148 2213 2244 2308
Operating weight (includes 80kg operator and full fuel tank) kg 12700 12740 12700 12740 13025 13100 12980 13030 12980 13030 13316 13390 12970 13010 12970 13010 13925 13370 13250 13300 13250 13300 13586 13660
 SPECIFICATION 426/436 WHEEL LOADER

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

426 ZX Standard arms Dimensions
Tyre size Manufacturer Type Rating Op weight kg STL kg FTTL kg Vertical mm Width mm N
20.5 - 25 (crossply) Firestone SGG L2 -348 -245 -215 -9 +5
20.5 - 25 (crossply) Goodyear SGL L2 -54 -38 -33 -9 +5
20.5 R 25 (radial) Goodyear RL - 2+ L2 +76 +54 +47 -9 +5
20.5 R 25 (radial) Bridgestone VUT L2 -160 -113 -99 0 0
20.5 R 25 (radial) Michelin XTLA L2 -160 -113 -99 -9 +5 M
20.5 R 25 (radial) Bridgestone VMT L3 0 0 0 0 0
550/65 R 25 (radial) Michelin XLD L3 -120 -85 -74 0 0 T
20.5 R 25 (radial) Michelin XRD1A L4 +456 +332 +282 +29 +8
20.5 R 25 (radial) Michelin XMINED2 L5 +680 +480 +421 +29 -3 Q
20.5 R 25 (radial) Goodyear RL-5K L5 +600 +423 +372 +29 -3
R
20.5R25 (radial) JCB Earthmover L3 128 86 74 41 12
20.5-25 (crossply) JCB Sitemaster L3 100 67 58 21 -7 O
Optional additional bolt-on counterweight +380 +707 +598 0 0
P
S

LOADER DIMENSIONS – 426 ZX

Assumes the machine is fitted with 1.9m³ shovel with toeplates and Michelin 20.5R25 XHA (L3) tyres.
Model 426 ZX
Bucket mounting Direct Quickhitch
Bucket type General purpose Penetration General purpose General purpose
Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate
Bucket capacity (SAE heaped) m3 1.8 2 2.3 2 1.9 2.1 2.4 2.7 1.8 2 2.3 1.9 2.1 2.4 2.7
Bucket capacity (struck) m3 1.55 1.72 1.984 1.72 1.61 1.79 2.06 2.35 1.55 1.75 1.98 1.59 1.79 2.06 2.35
Bucket width mm 2550 2550 2740 2550 2550 2550 2740 2740 2550 2550 2740 2550 2550 2740 2740
Bucket weight kg 925 1040 1250 1140 925 1040 1262 1329 800 850 1124 800 850 1136 1211
Maximum material density kg/m3 2298 2053 1761 2040 2203 1970 1677 1479 2152 1915 1559 2172 1943 1653 1447
Tipping load straight kg 9687 9627 9516 9574 9795 9687 9465 9398 9067 8969 8432 9067 8969 8747 8680
Tipping load full turn kg 8273 8212 8101 8159 8370 8273 8051 7984 7748 7659 7171 7748 7659 7437 7370
Payload kg 4137 4106 4051 4080 4185 4137 4026 3992 3874 3830 3586 3874 3830 3719 3685
Maximum break out force kN 145 135 129 135 145 135 129 120 126 118 113 126 118 113 106
M Dump angle maximum degrees 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45
N Roll back angle full height degrees 52 52 52 52 52 52 52 52 52 52 52 52 52 52 52
O Roll back at carry degrees 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44
P Roll back at ground level degrees 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
Q Load over height mm 3645 3645 3638 3640 3640 3640 3638 3638 3645 3645 3638 3640 3640 3638 3638
R Dump height (45° dump) mm 2850 2800 2889 2800 2973 2925 2889 2825 2726 2694 2768 2852 2804 2768 2704
S Dig depth mm 15 15 15 15 30 30 32 32 33 33 32 30 30 32 32
T Reach at dump height mm 1081 1131 1019 1131 936 986 1019 1083 1182 1232 1140 1057 1107 1140 1204
Pin height mm 3904 3904 3904 3904 3904 3904 3904 3904 3904 3904 3904 3904 3904 3904 3904
Reach maximum (45° dump) – horizontal arm mm 1828 1878 1776 1878 1683 1733 1766 1830 1929 1979 1907 1804 1854 1907 1951
Operating weight (includes 80kg operator and full fuel tank) kg 12890 13005 13215 13105 12850 12890 13112 13179 13005 10345 13319 13005 13045 13331 13406
 426/436 WHEEL LOADER SPECIFICATION

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

436 HT Standard arms HI LIFT Arms SHL Arms Dimensions
Op weight STL FTTL STL FTTL STL FTTL Vertical Width N
Tyre size Manufacturer Type Rating kg kg kg kg kg kg kg mm mm
20.5 - 25 (crossply) Firestone – L2 -348 -208 -201 -168 -164 -135 -130 -9 +5
20.5 - 25 (crossply) Goodyear SGL L2 -54 -32 -31 -25 -24 -21 -20 -9 +5
20.5 R25 (radial) Goodyear RL - 2 + L2 +76 +45 +44 +36 +35 -73 -64 -9 +5
20.5 R25 (radial) Bridgestone VUT L2 -160 -96 -93 -78 -76 +29 +28 0 0
M
20.5 R25 (radial) Michelin XTLA L2 -160 -96 -93 -78 -76 -73 -64 -9 +5
20.5 R25 (radial) Bridgestone VMT L3 0 0 0 0 0 0 0 0 0
T
550/65 R25 (radial) Michelin XLD L3 -120 -71 -69 -55 -55 -46 -45 0 0
20.5 R25 (radial) Michelin XRD1A L4 +456 +272 +264 +219 +215 -177 -171 +29 +8 Q
20.5 R25 (radial) Michelin XMINED2 L5 +680 +407 +393 +321 +321 +264 +255 +29 -3 R
20.5 R25 (radial) Goodyear RL-5K L5 +600 +358 +347 +289 +283 +232 -225 +29 -3
O
20.5R25 (radial) JCB Earthmover L3 128 86 74 70 41 40 28 41 12
20.5-25 (crossply) JCB Sitemaster L3 100 67 58 55 32 31 22 21 -7 S P
Optional heavy counterweight +380 +683 +570 +550 +466 +421 +353 0 0

LOADER DIMENSIONS – 436 HT

Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tyres.
Model 436 HT – STANDARD HEIGHT ARM 436 HT – HI LIFT ARM 436 HT – SUPER HI LIFT ARM
Bucket mounting Direct Quickhitch Direct Quickhitch Direct Quickhitch
Bucket type General purpose General purpose General purpose
Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate
Bucket capacity (SAE heaped) m3 2.3 2.6 2.4 2.7 2.3 2.6 2.4 2.7 2.3 2.6 2.4 2.7 2.3 2.6 2.4 2.7 2.3 2.6 2.4 2.7 2.3 2.6 2.4 2.7
Bucket capacity (struck) m3 1.984 2.270 2.057 2.346 1.984 2.270 2.057 2.346 1.984 2.270 2.057 2.346 1.984 2.270 2.057 2.346 1.984 2.270 2.057 2.346 1.984 2.270 2.057 2.346
Bucket width mm 2740 2740 2700 2700 2740 2740 2700 2700 2740 2740 2700 2700 2740 2740 2700 2700 2740 2740 2700 2700 2740 2740 2700 2700
Bucket weight kg 1151 1224 1163 1236 1124 1199 1136 1211 1151 1224 1163 1236 1124 1199 1136 1211 1151 1224 1163 1236 1124 1199 1136 1211
Maximum material density kg/m3 2082 1814 1995 1747 1958 1706 1876 1642 1582 1379 1516 1327 1488 1396 1426 1248 1288 1123 1235 1081 1212 1055 1161 1016
Tipping load straight kg 11467 11310 11467 11310 10828 10676 10828 10676 8715 8595 8715 8595 8229 8114 8229 8114 7247 7148 7247 7148 6843 6747 6843 6747
Tipping load full turn kg 9578 9436 9578 9436 9009 8870 9009 8870 7279 7171 7279 7171 6847 6741 6847 6741 5929 5841 5929 5841 5576 5490 5576 5490
Payload kg 4789 4718 4789 4718 4504 4435 4504 4435 3639 3585 3639 3585 3423 3370 3423 3370 2964 2920 2964 2920 2788 2745 2788 2745
Maximum break out force kN 147 134 147 134 131 122 131 122 147 134 147 134 131 122 131 122 153 139 153 139 136 124 136 127
M Dump angle maximum degrees 50° 50° 50° 50° 50° 50° 50° 50° 45° 45° 45° 45° 45° 45° 45° 45° 50° 50° 50° 50° 50° 50° 50° 50°
N Roll back angle full height degrees 58° 58° 58° 58° 58° 58° 58° 58° 60° 60° 60° 60° 60° 60° 60° 60° 58° 58° 58° 58° 58° 58° 58° 58°
O Roll back at carry degrees 48° 48° 48° 48° 48° 48° 48° 48° 54° 54° 54° 54° 54° 54° 54° 54° 48° 48° 48° 48° 48° 48° 48° 48°
P Roll back at ground level degrees 43° 43° 43° 43° 43° 43° 43° 43° 45° 45° 45° 45° 45° 45° 45° 45° 43° 43° 43° 43° 43° 43° 43° 43°
Q Load over height mm 3755 3755 3755 3755 3755 3755 3755 3755 4409 4409 4409 4409 4409 4409 4409 4409 4976 4976 4976 4976 4976 4976 4976 4976
R Dump height (45° dump) mm 2806 2742 2974 2883 2721 2657 2862 2798 3460 3396 3628 3537 3375 3311 3516 3452 4023 3959 4191 4100 3938 3874 4079 4015
S Dig depth mm 132 132 106 106 132 132 106 106 127 127 101 101 127 127 101 101 105 105 79 79 105 105 79 79
T Reach at dump height mm 1148 1207 1044 1103 1225 1283 1121 1179 1148 1207 1044 1103 1225 1283 1121 1179 1172 1231 1068 1127 1249 1307 1145 1230
Pin height mm 4021 4021 4021 4021 4021 4021 4021 4021 4675 4675 4675 4675 4675 4675 4675 4675 5242 5242 5242 5242 5242 5242 5242 5242
Reach maximum (45° dump) – horizontal arm mm 1987 2051 1883 1947 1772 2136 1968 2032 2477 2541 2373 2437 2262 2626 2458 2522 2952 3016 2848 2912 2737 3101 2933 2997
Operating weight (includes 80kg operator and full fuel tank) kg 14491 14564 14503 14576 14788 14863 14800 14875 14981 15054 14993 15066 15278 15353 15290 15365 15533 15606 15545 15618 15830 15905 15842 15917
 SPECIFICATION 426/436 WHEEL LOADER

TYRE SIZE
436 ZX Standard arms Dimensions
Op weight STL FTTL Vertical Width N
Tyre size Manufacturer Type Rating kg kg kg mm mm
20.5 - 25 (crossply) Firestone L2 -348 -208 -201 -9 +5
20.5 - 25 (crossply) Goodyear SGL L2 -54 -32 -31 -9 +5
20.5 R 25 (radial) Goodyear RL - 2 + L2 +76 +45 +44 -9 +5
20.5 R 25 (radial) Bridgestone VUT L2 -160 -96 -93 0 0 M
20.5 R 25 (radial) Michelin XTLA L2 -160 -96 -93 -9 +5
20.5 R 25 (radial) Bridgestone VMT L3 0 0 0 0 0 T
550/65 R 25 (radial) Michelin XLD L3 -120 -71 -69 0 0
20.5 R 25 (radial) Michelin XRD1A L4 +456 +272 +264 +29 +8 Q
20.5 R 25 (radial) Michelin XMINED2 L5 +680 +407 +393 +29 -3
20.5 R 25 (radial) Goodyear RL-5K L5 +600 +358 +347 +29 -3 R
20.5R25 (radial) JCB Earthmover L3 128 70 60 41 12 O
20.5-25 (crossply) JCB Sitemaster L3 100 55 47 21 -7 P
S
Optional additional bolt-on counterweight +380 +680 +570 0 0

LOADER DIMENSIONS – 436 ZX

Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tyres
Model 436 ZX
Bucket mounting Direct Quickhitch
Bucket type General purpose Penetration General purpose General purpose
Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate
Bucket capacity (SAE heaped) m3 2.3 2.6 2.6 2.4 2.7 2.3 2.6 2.4 2.7
Bucket capacity (struck) m3 1.984 2.274 2.274 2.057 2.346 1.984 2.274 2.057 2.346
Bucket width mm 2740 2740 2740 2700 2700 2740 2740 2700 2700
Bucket weight kg 1250 1317 1361 1262 1329 1124 1199 1136 1211
Maximum material density kg/m3 1999 1744 1752 1913 1676 1908 1664 1811 1600
Tipping load straight kg 11057 10911 10953 11044 10898 10551 10404 10451 10388
Tipping load full turn kg 9199 9069 9110 9185 9055 8778 8656 8694 8643
Payload kg 4599 4535 4555 4592 4527 4389 4328 4347 4321
Maximum break out force kN 176 162 162 176 162 157 144 157 144
M Dump angle maximum degrees 47° 47° 47° 47° 47° 47° 47° 47° 47°
N Roll back angle full height degrees 58° 58° 58° 58° 58° 58° 58° 58° 58°
O Roll back at carry degrees 45° 45° 45° 45° 45° 45° 45° 45° 45°
P Roll back at ground level degrees 37° 37° 37° 37° 37° 37° 37° 37° 37°
Q Load over height mm 3755 3755 3755 3755 3755 3755 3755 3755 3755
R Dump height (45° dump) mm 2824 2759 2759 2965 2833 2739 2674 2880 2748
S Dig depth mm 131 131 131 105 105 131 131 105 105
T Reach at dump height mm 1248 1312 1312 1144 1103 1333 1397 1229 1188
Pin height mm 4021 4021 4021 4021 4021 4021 4021 4021 4021
Reach maximum (45° dump) mm 2000 2064 2064 1896 1947 2077 2141 1973 2024
Operating weight (includes 80kg operator and full fuel tank) kg 14910 14977 15021 14922 14989 15207 15274 15219 15286
 426/436 WHEEL LOADER SPECIFICATION

ENGINE
426 436 LOADER HYDRAULICS
Type 4 stroke direct injection 426 436
Model Cummins BTAA 5.9C Pump type Twin variable displacement piston pumps
Capacity litres 5.9 Pump 1 max. flow l/min 132 132
Aspiration Turbo charged Pump 1 max. pressure bar 250 250
Cylinders 6 Pump 2 max. flow l/min 132 132
Max gross power to SAE J1995/ISO 14396 kW (hp) @ 2000rpm 113 (152) 132 (177) Pump 2 max. pressure bar 160 160
Rated gross power to SAE J1995/ISO 14396 kW (hp) @ 2200rpm 112 (150) 129 (173) Hydraulic cycle times at full engine revs Seconds
Nett power to SAE J1349/EEC 80/1269 kW (hp) @ 2200rpm 106 (146) 123 (165) 426 436
Max torque Nm @ 1300rpm 633 786 Arms raise (full bucket) 4.4 5.9
Emissions Tier 2 Bucket dump (full bucket) 1.0 (1.3 ZX) 1.0
Arms lower (empty bucket) 2.7 3.4
TRANSMISSION Total cycle 8.1 (8.4 ZX) 10.3
426 436
Make and model ZF 4WG 160 ZF 4WG 190 SERVICE FILL CAPACITIES
4 Speed 4 Speed 426 436
1st gear kph 7.4 8.2 Hydraulic system litres 210 210
2nd gear kph 14.5 14.5 Fuel tank litres 230 230
3rd gear kph 25.2 27 Engine oil sump litres 14 14
4th gear (forward only) kph 37.9 37.9 Transmission oil system litres 27 32.5
Torque convertor stall ratio 2.549:1 2.873:1 Axle oil (front) litres 39 39
Axle oil (rear) litres 37 39
AXLES Engine coolant system litres 35 35
426
Type Open differentials/Limited slip differential STANDARD EQUIPMENT Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever servo control, high
torque geometry combines with excellent visibilty between the arms.
Make and model ZF MT-L 3075 II (front) ZF MT-L 3065 II (rear)
Engine: Air cleaner - 2 stage dry type - cyclonic with primary and safety elements, silencer and exhaust stack, sedimenter,
Overall axle ratio 21.53:1 twin bowl fuel filters, alternator and compressor drive belt guards. Isolated cooling package with hydraulically driven
cooling fan.
Rear axle oscillation 21°
Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect
436 isolator switch, direction changes and kickdown on gear selector and loader control lever.
Type Open differential / Limited slip differential Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear.
Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power assisted. Parking disc brake on transmission
Make and model ZF MT-L3085 II (front) ZF MT-L 3075 II (rear)
output shaft.
Overall axle ratio 20.184:1 Hydraulics: Twin piston pump with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator
Rear axle oscillation 21° support, 3rd spool auxiliary hydraulic circuit as standard. Hydraulic tank located in the rear chassis fabrication.
Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock.
Cab: ROPS/FOPS safety structure, interior reading light, centre mounted master warning light. Electronic monitoring
STEERING Priority steer hydraulic system with emergency steering. panel with LCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear
windscreen wipe/wash and self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows,
BRAKES Hydraulic power braking on all wheels, hub mounted, oil immersed, multi-plate disc brakes, parking brake, mechanical type sun visor, sun blind, internal rear view mirror, heated external mirrors, adjustable suspension seat with belt and headrest,
operating on transmission output shaft. operator storage facilities, laminated windscreen, heated rear screen, loader control isolator, horn.
Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light,
TYRES A variety of tyre options are available including: battery isolator, radio wiring and speakers, 70 amp alternator, rotating beacon.
20.5-25 SGG (L2). 20.5-25 SGL (L2). 20.5R25 RL-2+ (L2). 20.5R25 VUT (L2). 20.5R25 XLTA (L2). 20.5R25 VMT (L3). Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight,
20.5R25 XHA (L3). 550/65R25 XLD (L3). 20.5R25 XRDIA (L4). 20.5R25 XMINED2 (L5). 20.5R25 RL-5K (L5). recovery hitch, lifting lugs.
620-75 MEGA XBIB. 750-75 MEGA XBIB.
OPTIONAL EQUIPMENT Air conditioning, limited slip differentials front/rear axles, Turbo 2 and dust buster pre-cleaner, tooth guard, replaceable
bucket wearparts, epoxy coated radiator/coolers, automatically reversing cooling fan, stainless steel brake pipes, smooth
ride system (SRS), hydraulic quickhitch, full rear fenders, reversing camera (colour), additional front and rear worklights,
CAB 426/436 in cab noise level 73Lp auto greasing system, joystick or Multi-lever hydraulic controls, auxiliary hydraulic control on seperate lever or joystick
mounted (proportional),Smart reverse alarm, canopy cab, Wastemaster cab, Livelink telematics, widecore radiator, sealed
electrics, grease gun and cartridge, basic and full belly guard kits, mesh air intake screen, ARV kit, safety strut, transmission
ELECTRICAL SYSTEM cooler bypass, 24V to 12V in cab converter, cab screen guards, additional front and rear work lights, heated air suspension
System voltage Volt 24 seat, heated mirrors, extra counterweight, light guards, front and rear blinds, engine block heater, biodegradable hydraulic
oil, cab filtration options, fire extinguisher, number plate light kit, auxiliary 4th spool hydraulic service, grease gun,
Alternator output Amp hour 70 LiveLink telematics.
Battery capacity Amp hour 2 x 110
 SPECIFICATION 426/436 WHEEL LOADER

LOADER DIMENSIONS – FORK FRAME WITH FORKS

A
C
B

Standard Height Arm Hi Lift Arm Super Hi Lift Arm ZX Arm

Assumes the fitment of Michelin 20.5R25 XHA (L3) tyres Parallel fork Non parallel fork Parallel fork Non parallel fork Parallel fork Non parallel fork
426 HT 436 HT 426 HT 436 HT 426 HT 436 HT 426 HT 436 HT 436 HT 436 HT 426 ZX 436 ZX
Fork carriage width mm 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
Length of tines mm 1220 1220 1220 1220 1220 1220 1220 1220 1220 1220 1220 1220
A Reach at ground level mm 760 791 770 798 1173 1147 1183 1154 2014 2021 770 798
B Reach at arms horizontal mm 1545 1613 1545 1620 1893 2103 1893 2110 2578 2585 1545 1620
C Below ground level mm -52 8 -25 16 11 3 38 11 -19 -11 -42 16
D Arms, horizontal height mm 1906 1946 1867 1936 1906 1946 1867 1936 1946 1936 1867 1936
E Arms, maximum height mm 3718 3828 3695 3818 4148 4482 4125 4472 5045 5045 3695 3818
F Reach at maximum height mm 792 862 800 869 954 862 962 869 886 893 800 869
Payload* kg 5000 5000 5000 5000 4518 4650 4518 4650 3599 3599 5260 5610
Tipping load straight kg 7571 8589 7571 8589 6587 6871 6587 6871 5428 5428 7722 8289
Tipping load full turn (40°) kg 6492 7267 6492 7267 5648 5813 5648 5813 4499 4499 6575 7013
Attachment weight kg 440 482 440 482 440 482 440 482 440 440 440 482
*At the centre-of-gravity distance 500mm. Based on 80% of full turn tipping load as defined by ISO 8313.
Manual fork spacings at 50mm increments. Fork section 100mm x 50mm.
 426/436 WHEEL LOADER SPECIFICATION

BUCKET CAPACITIES – 426 BUCKET SELECTOR – STANDARD HEIGHT ARM

Material Loose density (kg/m³) Fill factor (%)
Snow (fresh) 200 110
HT
Peat (dry) 400 100
2.7
Sugar beet 530 100
HT HL ZX
Coke (loose) 570 85
Barley 600 85
HT
Petroleum coke 680 85
2.4
Wheat 730 85
HT HL ZX
Bucket capacity (m3)

Coal bitumous 765 100

Fertiliser (mixed) 1030 85
HT
Coal anthracite 1046 100
2.1
HT HL Earth (dry) (loose) 1150 100
ZX
Nitrate fertiliser 1250 85
Sodium chloride (dry) (salt) 1300 85
HT
1.9 Cement Portland 1440 100

HT HL ZX Limestone (crushed) 1530 100

Sand (dry) 1550 100
1000 1200 1400 1600 1800 2000 2200 2400 Asphalt 1600 100
Material density (kg/m3) Gravel (dry) 1650 85
Clay (wet) 1680 110
Sand (wet) 1890 110
BUCKET CAPACITIES – 436
Fire clay 2080 100
Copper (concentrate) 2300 85
HT Slate 2800 100
2.7 Magnetite 3204 100
HT SHL HT HL ZX

HT SHL HT
Bucket capacity (m3)

2.6
HT HL ZX

HT SHL HT
2.3
HT HL ZX

800 1000 1200 1400 1600 1800 2000 2200

Material density (kg/m3)

100%
HT = Standard height arm HT HL = High lift arm HT SHL = Super high lift arm ZX = Z-bar

110% 95%
Bucket fill factors