CONTROLS Asphalt Testing Accessories The Asphalt Testing Accessories are sels for testing asphalt samples with Automatic Multipurpose Testers Specifications Marshall to EN 12697-34, ASTM D1559, ASTM D6927_ 34-VO1077MAR, ‘Test set to perform the Marshall test in the digital mode, including: 82-0375 Load cell 50 KN capacity 82-P0375IC Adapter to fit load cell (two pieces) £82-P0322 Displacement transducer, 25 mm travel 34-T0104/81 Adjustable transducer holder 34-T0104/13 Compression device extension 34-T0104/10 Compression device 76-B0033/4 Stability mould for 4" (101.6 mm) diameter specimens ‘All above items can be ordered individually. CBR and Marshall (To avoid duplications) 34-VO107/CM ‘Test set to perform the CBR and Marshal test, including 82-PO37S Load cell 50 KN capacity 82-PO375IC Adapter to fit load cell (two pieces) 82-P0322 Displacement transducer, 25 mm travel 34-T0104/81 Adjustable transducer holder 34-T0103/1 Adjustable CBR penetration piston '34-T0104/13 Compression device extension 34-T0104/10 Compression device 76-B0033/4 Stability mould for 4" (101.6 mm) diameter specimens ‘All above items can be ordered individually Indirect Tensile 4” (6") to EN 12697-23, ASTM 06931 82-0375 Load coll 50 KN capacity 82-PO375IC Adapter to fit load cell (two pieces) 82-P0322 Displacement transducer, 25 mm travel 34-TO104/81 Adjustable transducer holder 34-TO104/13 Compression device extension (two pieces) 34-T0104/10 Compression device 76-BOOT8IF Frame for tensile spliting device www [Link]Ne 76-B0078IF2 Pair of loading strips for 150 mm dia. sample 76-BO078IF3 Pair of loading strips for 160 mm dia. sample Interlayer bonding / Shear bond test (Leutner test) to EN 12697-48 82-0375 Load cell 80 kN capacity 82-PO37SIC (2 pieces) Connecting adapter load cel/cross beam 82-P0322 Displacement transducer, 25mm travel 34-T0104/81 Aajustable transducer holder '34-T0104/13 Compression device extension 34-T0104/10 Compression device 76-B0033/E Shear bond test apparatus, 150mm 76-B0033/E1 Adaptor to test 100mm dia. samples with shear bond test apparatus 76-B0033VE Highlights ‘Accessory sets for testing asphalt samples with Automatic Multipurpose Testers, Suitable for all Automatic Multipurpose Testers models if not otherwise specified. ‘See Technical Specifications for testing configurations. Models. +34-V0107 MARY Test set to perform the Marshall test in diltal mode, including: 82-P0375 Load cell 50 KN capacity 62-PO375IC Adapter to it oad cell (two pieces) 82-P0322 Displacement transducer, 25 mm travel 34-T0104/81 Adjustable transducer holder 34-T0104/13 Compression device extension 34-T0104/10 Compression device 76-B0033/4 Stability mould for 4" (101.6 mm) diameter specimens + 34-V0107/CMV Test set to perform the CBR and Marshall test n digtal mode, including: 82-PO37S Load cell 80 kN capacity 82-P0375/C ‘Adapter to ft load cel (two pieces) 82-P0322 Displacement transducer, 25 mm travel 34-T0104/81 Adjustable transducer holder 34 ‘TO103/1 Adjustable CBR penetration piston 34-T0104/13 Compression device extension 34-T0104/10 Compression device 76-B0033/4 ‘Stability mould for 4" (101.6 mm) diameter specimens Accessories Test set to perform the Marshall: + 82-P0375) 50 kN capacity strain gauge load cell + 82-POS75IC/ Connecting adapter load celcross head + 82-P0322) Linear potentiometric displacement transducer, 25 mm travel with cable 6 pins connector + 34-T0104/81/ Adjustable support for displacement transducer + 34-T0104/13/ Compression device extension, suitable for con- nection to 34-T0104/81, adjustable trasducer + 34-TO104/10) Compression device + 76-B0033/4/ Stability mould for 4” (101.6 mm) diameter specimens Test set to perform the CBR and Marshall test + 82-P0375) 60 kN capacity strain gauge load cell + 82-P0375iC/ Connecting adapter load celicross head + 82-P0322! Linear potentiometric displacement transducer, 25 mm travel wih cable 6 pins connector +34-T0104/61/ Adjustable suppor for displacement transducer + 34-T0103/1/ Adjustable CBR penetration piston + 34-T0104/18/ Compression device extension, suitable for con- nection to 34-TO104/81, adjustable trasducer + 34-T0104/10) Compression device + 76-80033/4/ Stability mould for 4" (101.6 mm) clameter specimens Test set to perform Indirect Tensile Test on Bituminous Mixtures: + 82-P0375) 50 KN capacity strain gauge load cell + 82-P0375IC/ Connecting adapter load celi/cross head + 82-P0322/ Linear potentiometric displacement transducer, 25 mm travel wih cable 6 pins connector + 34-T0104/81/ Adjustable support for displacement transducer, + 34-T0104/13/ Compression device extension, suitable for con- nection to 34-T0104/81, adjustable trasducer + 34-T0104/10/ Compression device + 76-BOQ78IF! Frame for tensile spliting device (Lottman Breaking Head) for compacted biturninous samples 100 mm (4") dia. 150 mm (6") ‘and 160 mm, Conforming to EN 12697-23, ASTM D6931 and AASHTO T283. To be completed with suitable pair of loading strips. + 76-B0078IF1/ Pair of loading strips for 100 mm dia, samples suitable for jig code 76-B0078/F + 76-B0078IF 2! Pair of loading strips for 150 mm dia, samples suitable for jig code 76-BOO7S/F + 76-B0078IF3/ Pair of loading strips for 160 mm dia, samples suitable for jig code 76-BO07SIF Test set to perform Interlayer bonding / Shear bond test (Leutner test): + 82-PO376/ 50 KN capacity strain gauge load cell + 82-PO375IC/ Connecting adapter load celi/cross head + 82.P0322/ Linear potentiometric displacement transducer, 25 mm travel with cable 6 pins connector SRT a eee pect Or erent cepacia+ 34-T0104/13/ Compression device extension, suitable for con- nection to 34-T0104/81, adjustable trasducer + 34-T0104/10/ Compression device + 76-B0033/E/ Shearing head acc. to Leutner method for 150mm dia, samples for Shear Bond Test (SBT) to EN 12697-48 + 76-B0033/E1/ Adapter for 100mm dia, samples for Leutner shearing head Standards ‘+ AASHTO 1245 + ASTM D1559 + ASTM D5581 + ASTM 6927 + ASTM D6931 + BS 598:107 + CNR 30 + EN 12607-43 Contact us: slest@[Link] ‘contr. com