Printed Pages—7 BT401

(Following Paper ID and Roll No. to be filled in your Answer Book)

PAPER ID : 154401 Roll No.

[Link].
(SEM. IV) THEORY EXAMINATION 2013-14
STATISTICAL TECHNIQUES (MATHEMATICS–III)

Time : 3 Hours Total Marks : 80

Note :– Attempt questions from each Section as per instructions.
Symbols have their usual meaning. Provide the statistical
tables which are required to student.
SECTION–A

1. Attempt all parts of this question. Each part carries 1.6 marks.
(1.6×10=16)

(a) Write the Empirical relation and find mean, if mode = 64.2
and median = 66.33.

(b) If the mean of the following series is 30, find out missing
value of the following data :

25, 30, 21, X, 47, 10, 15, 17, 45, 35

(c) Find the standard deviation of natural numbers from

1 to 10.

(d) Define normal distribution.

BT401/DQJ-21908 1 [Turn Over

 Find the variance of two populations and test whether the (d) A manufacturing company purchased three new machines
two samples have the variance. of different makes and wishes to determine whether one

(b) To test the effectiveness of inoculation against cholera, of them is faster than the others in producing a certain
the following table was obtained : output. Five hourly production figures are observed at

Attacked Not attacked Total random from each machine and results are given below :

Inoculated 30 160 190 Observation A1 A2 A3

Not Inoculated 140 460 600 1 25 31 24

Total 170 620 790 2 30 39 30

Use to defend or refute the statement that the inoculation 3 36 38 28

prevents attack from cholera.
4 38 42 25
(c) Ten individuals are chosen at random from a population
5 31 35 28
and their heights are found to be in inches : 63, 63, 64, 65,
66, 69, 69, 70, 70, 71. Discuss the suggestion that the mean (e) Analyse the following results of a Latin square experiment :

height in universe is 65 inches given that for 9 degrees of Column  1 2 3 4

freedom the value of student's t-test and 5 percent level
Row  A (12) D (20) C (16) B (10)
of significance is 2.262.
D (18) A (14) B (11) C (14)
7. (a) Explain the terms:
B (12) C (15) D (19) A (13)
(i) Randomization
C (16) B (11) A (15) D (20)
(ii) Local Control
The letters A, B, C and D denote the treatments and the
(b) Write advantages and disadvantages of completely
randomized design. figures in brackets denote the observation.

BT401/DQJ-21908 6 BT401/DQJ-21908 3 [Turn Over

 SECTION–C (b) The mean height of 500 students is 151 cm and the standard

Note :– Attempt any two parts from each question of this Section. deviation is 15 cm. Assuming that the heights are normally
(5×8=40) distributed, find how many students have heights between

3. (a) Calculate the standard deviation for the following : 120 cm and 155 cm.

X: 56 63 70 77 84 91 98 (c) If the probability that an individual suffers a bad reaction

from a certain injection is 0.001, determine the probability
F: 3 6 14 16 13 6 2
that out of 2000 individuals (a) exactly 2, (b) more than 2
(b) Represent the following data by Diagram :
individuals suffer a bad reaction.
Yield in Quintals
Name 5. (a) Explain Mann–Whiteney Wilcoxon test.
2002 2003 2004 2005
(b) Find the coefficient of correlation for the following data :
Wheat 100 130 150 100
X 10 14 18 22 26 30
Bajra 80 40 50 60
Y 18 12 24 6 30 36
Moong 50 60 70 35
(c) Fit a second degree curve of regression of Y on X to the
Mustard 40 20 80 40
following data :
(c) Calculate the Karl Pearson's coefficient of skewness for
X 1 2 3 4
the following data :
Y 6 11 18 27
Class Intervals 0–10 10–20 20–30 30–40 40–50

Frequency 6 12 18 30 25 6. (a) Random samples are drawn from two populations and the
following results were obtained :
4. (a) Three groups of children contains respectively 3 girls and
1 boys; 2 girls and 2 boys; 1 girl and 3 boys. One child is Sample X 16 17 18 19 20 21 24 23 26 27

selected at random from each group. Find the chance of Sample Y 19 22 23 25 26 28 29 30 31 32 35 36

selecting 1 girl and 2 boys.

BT401/DQJ-21908 4 BT401/DQJ-21908 5 [Turn Over

 (e) The mean of a binomial distribution is 20 and standard (c) In a blade manufacturing factory 1000 blades are examined
deviation is 4. Calculate n, p q n, p q with usual notation. daily. Draw the np Chart for the following data and examine
whether the process is under control ?
(f) Explain the significance of Regression Analysis.
Date 1 2 3 4 5 6 7 8
(g) Define F–test.
No. of
(h) Explain the nature of a two way analysis of variance.
defective 9 10 12 8 7 15 10 12
(i) Write the applications of randomized block design.

(j) Write advantages of statistical quality control.

Date 9 10 11 12 13 14 15
SECTION–B
No. of
2. Attempt any three parts of this question : (3×8=24)
defective 10 8 7 13 14 15 16
(a) For frequency distribution :

Values 5–10 10–15 15–20 20–25 25–30 30–35 35–40

Frequency 6 8 17 21 15 11 2

Compute first four moments about the mean of distribution.

Also find the measure of skewness and measure of kurtosis.

(b) Find the mean and variance of Binomial distribution

(c) Find rank correlation for the following data :

X 56 42 72 36 63 47 55 49 38 42 68 60

Y 147 125 160 118 149 128 150 145 115 140 152 155

BT401/DQJ-21908 2 BT401/DQJ-21908 7 475