AM04240
Fasson® Fastrans Plus/
Permanent
A smooth white, one side
machine coated semigloss paper
exhibiting good printability and
converting properties
Applications Salient Features
Low adhesive build-up on presses
and applicators resulting in
improved efficiency.
Optimum adhesion on wide range
of substrates.
Suitable for high speed dispensing.
Consistent quality enabling high
converting and printing efficiency
Defined Service guidelines
Spec Code : AM04240 || EAN Code : 0730006v-1 Issue date: Nov, 2017
Facestock
A smooth, white, semi-gloss paper exhibiting good thermal transfer AM04240
printability for general purpose bar code labels..
Basis Weight: 80 gsm 10% ISO 536 Fasson® Fastrans
Caliper: 0.068 mm 10% ISO 534
Adhesive
Plus/Permanent
A general purpose permanent rubber based adhesive featuring high initial tack and
ultimate bond strength
Liner
A super calendered glassine paper with excellent strength characteristics.
Basis Weight: 60 gsm 10% ISO 536
Caliper: 0.052 mm 10% ISO 534
Laminate
Total Construction Caliper 0.135 mm ±10%
Performance data
Initial Tack 615 N/m FTM 9 glass
Peel Adhes.90° 360 N/m FTM 2 st. st.
Min. Appl. Temp. 5°C
Service Temp. -20°C to 70°C
Applications and use
Typical applications include bar code labels for inventory tracking, food
packaging, general retail labeling and various industrial applications
requiring good quality bar codes. The adhesive used is in compliance with Fastrans Plus
FDA 175.105 recommendations.
It is recommended that following points should be taken into consideration before
S2060
label application
The container should be free of contamination either in the form of mold
release agent or a physical contamination in form of dry powder or liquid. BG40
Not recommended for containers with diameters less than 25 mm.
The concentricity of the cylindrical containers should be in tight tolerance.
We recommend referring to our two page “Criteria for Pressure-Sensitive Material
Selection Guide” for more detailed information.
Conversion/printing
In addition to superior TT printing, the product is especially suited for
single or multi-color line printing. The product can be printed by
letterpress, offset, flexo, screen or xerographic printing technology and
can be hot foil stamped.
Shelf life
Two years when stored at 22o C / 50% RH.
Avery Dennison (I) Pvt. Ltd.
Narsinghpur Industrial Area,
Six Kilometer Stone,
Delhi- Jaipur Highway,
Gurgaon, Haryana. 122001
Tel: +91 124 2215581/582/583
Warrenty
All statements, technical information and recommendations about AVERY liable or responsable for consequential or incidental damages. NO EXPRESS
DENNISON products are based upon tests believed to be reliable but but do WARRANTIES, WHETHER OF MERCHANTIBILITY OR FITNESS FOR ANY
no constitute a guarantee or warranty. All AVERY DENNISON products are ARTICULAR USE, OR OTHERWISE, EXCEPT AS SET FORTH ABOVE
sold with the understanding that PURCHASER has independently determined (WHICH IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES)
the suitability of such products for its purposes. AVERY DENNISON products SHALL APPLY TO PRODUCTS SOLD BY AVERY DENNISON. AVERY
are warranted to be free of defects in material or workmanship for a period of DENNISON SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER
one year from the date of shipment. Any product shown to the satisfaction of SUCH WARRANTIES. NO WAIVER, ALTERNATION, ADDITION OR
AVERY DENNISON within the time provided to be so defective shall be MODIFICATION OF THE FOREGOING CONDITIONS SHALL BE VALID
replaced without charge of AVERY DENNISON may issue credit in such UNLESS MADE IN WRITING AND SIGNED BY AN EXECUTIVE OFFICER
amount as it seems reasonable however, in no event shall AVERY OF AVERY DENNISON. No salesman, representative, or agent of AVERY
DENNISON be responsable for claims beyond the replacement value of the DENNISON is authorized to give any guarantee, warranty or make any
defective product or in any way representation contrary to the above.
