Different types of Fire Alarm System –
• Conventional Fire System – Generally comes with
Zones. Each zone can have max 20 detectors.
• Addressable Fire Alarm System – This comes in
loops. Different manufacturer has different loop
capacity.
• Aspirating Smoke Detection System – Independent
unit installed for very early smoke detection system. It
can be connected to Fire Alarm system.
• Video Smoke detection system – Standalone system
can be connected to Fire Alarm system
Easily More R&D & Support
• Over half the business dedicated to
R&D and Support
• Investment in leadership
• Less requirement for support
• Leading industry expertise
• Sit on industry bodies across the globe
• Worldwide approvals
• ‘Industry first’ approvals
– EN54 Part 13
– Entire Australian product range to
BCA AS1670
Lifetime Personalised
Online Support
• Open support tickets
• View support history
• Download software/firmware
• Download warranty certificates
• Book training
• Download training certificates
• Download manuals etc
• Request marketing support
• Book product demos
• Order Approved Partner certs
• Available 24/7 from anywhere
Approvals & Memberships
Legendary Customer Service
Training & Tech Support
Instant telephone and online
support
Team of over 30 fire experts
Designers, coders, engineers
Full system network
simulators
Full system training at 3 UK
and 3 overseas tech centers
Lifetime training passport
On site tech support service
After sales service team
Built to fit individual
customers
The Leading
Multiprotocol
Choice
Choose your panel,
Choose your detector, Real Freedom.
Choose your installer. Advanced Quality.
The Fire
System for the
EN54 World
The Fire
System for the
UL 864 World
Ultra-dependable
Extinguishing
Control
Fire Alarm System Features –
Design Guideline NFPA 72
• UL Listed & En Approved Fire Alarm Systems.
• 1 to 4 loop capacity with UL listed panel.
• Loop capacity 125 detectors/devices per loop.
• 1 to 8 loop capacity with En approved Panel.
• 240 detectors + Devices per loop. (En Approved System)
• Redundant CPU Panel available.
• Touch Screen Repeater panels
• All Devices are with inbuilt isolators.
• Lite detector series available without inbuilt isolator.
• Networkable upto 200 nodes.
EN54 Part 13
•Be wary of products designed to…(all advanced products are approved)
•Ensure all components are sourced and manufactured in house
•Indication and response times from CIE are set-out in the EN standards and EN54-
13:2005 (E) 4.3.2.1 states that “a fire alarm condition shall be indicated on the main
CIE with 20 seconds.”
•The typical delay for a panel to indicate a fire from any zone on 50 panel ad-net+
network is less than one second and well within specification on a fully loaded
200 panel system.
EN54 Part 13
Requirements:
• All components are individually tested and certified to the
relevant harmonised product standard
• Work together and fully operate as specified
• Do not interfere with any mandatory function
• For system compliance, all components that are to be
connected must be identified in the documentation and must be
tested for compatibility
Component approvals
• All components fully approved to the appropriate harmonised
standard.
• All components been tested together for system compatibility in
all modes of operation.
Transmissions paths
• A system capable of indicating partial short and partial open
conditions for ALL possible load conditions. (Can be hidden
until fire condition)
MxPro 5 – Our Most Advanced Panel
MxPro 5 Features
• EN54 Parts 2,4 & 13
• 1-8 Loop
• 3 protocols
• Up to 2,000 zones
• 200 Node networks
• True peer-to-peer network
• Fault tolerant networking
• 200,000 devices per network
• Unique on-board diagnostics tools
• On-board scope
• RCTs, BMS, ipGateway, I/O drivers
• Huge range of peripherals
• Simple installation and configuration
• Primary/second activation. i.e. Flash if fire
started here.
• Drift and new Warning State – can be
downloaded to service tool. Dirty detectors
can give warning instead of a fault
MxPro 5 Features
• Autolearn facility
• In built P-Bus
• 20 on board programmable LEDs
• 4 programmable push buttons
• 201 programmable false alarm
management zones per panel
• Complete device history from any panel
• Timed enablement of isolated zones, input
and output devices
• Advanced logic and easily programmed
cause-and-effect
• Service Tool
• Backward compatible
• Multiprotocol network
• MODBUS/BACNET compatible
Programming
• Up to 200 Output Groups available per Tools configuration software common to
panel all panels
• Panel is pre-configured with default • Powerful Cause & Effect features
Output Groups for on-board and loop
powered devices • Common range of peripheral devices
• Outputs can be programmed to operate • All Outputs are fully programmable to
upon Zone Range, Time-Clock, General respond to any combination of Input
Event, Input Events & Logic Statements signal type (Logic)
• Programmable Ringing Styles provide a • Outputs can be programmed across
solution to programming Phased network by zone, input device, general
Evacuation event, time clock, or logic statement
• Common graphical LCD user interface & • Test alarms can be programmed to have
software a completely independent Cause & Effect
(Local Panel)
• Common menu structure for day-to-day
operation of panels
• User-friendly Windows based Dynamix
False Alarm Management
• Day/Night sensitivity modes
• Investigation delay for selectable Inputs and Outputs
• Multiple On-board, 7 day time-clocks can be used to control any Input/Output device
• Any Input device can be gated with a time clock to provide a manual control
Categories of False Alarm Management
Alarm Verification features can be used to help verify if an activated condition from a
device is considered to be a genuine alarm before the fire alarm condition is displayed
on the panel.
Investigation Delays to Outputs – can be used to delay the operation of certain outputs
after the Fire Alarm condition is displayed
False Alarm Management
• Divide a building into up to 10,000 independent false alarm building areas
• Network points can be assigned to the building areas
• Assign verification and investigations to the building areas
• Assign detection thresholds, sounder styles etc.
Intelligent Alarm
Acknowledgeme
nt & False Alarm
Reduction
False Alarm Management
Verification Method;
Type A (Not Displayed) or Type B (Displayed)
If Type B selected ’Verifying’ (Pre-Alarm) is
displayed on the panel during the verification period
Verification Time- If one or more devices in the
same area stays in alarm for longer than time
specified the panel will enter a fire condition.
Min Time in Verification - Devices will not return to
normal until this time has time has elapsed
Second Stage Time - Further time to clear the
alarm condition if stage 1 is acknowledged ( all
other times n/a in stage 2).
Sounder Ringing Style - Any sounders operated
during verification will use this ringing style (Note,
irrespective of output rules!)
Max Areas in Verification - Maximum areas allowed
in verification mode simultaneously across the
network. (Fire Alarm displayed if number exceeded)
Time clock – Day / Night time settings
False Alarm Management
Alarm verification is used in Building Area 1
during the day time only
The verification time can be extended using a
designated ‘acknowledgement’ button
Alarm Verification is used for all Heat, Smoke
and Multi sensor detectors in the area. Other
devices (such as Input modules and Call
Points) are selected by device.
All Sounders and Beacons in Area 1 will be
operated during the verification period when
the device activated is also in area 1. This will
happen automatically regardless of any cause
and effect rules. Relays would not be operated.
Integrated Smoke & Fan Control
Integrated Smoke & Fan Control
• Integrated control interface and PCBs
• Simple configuration software – colour coded for status settings
• Set multiple smoke and/or damper compartments
• Define compartment detection zones
• Map fans, duct probes and node settings
MxPro 5 Networking
Networking
• Up to 200 control panels. • Allows larger sites to be protected by
distributing fire panels instead of taking
• Peer to Peer, token passing ring all detection circuits back to one point
technology
• Increased system integrity, reduced
• Up to 20Km as Standard. installation costs
• Fully monitored and Secure network. • Allows information from any input or
• Communications bus all achieved using output point to be passed over 5
network
standard 2 core fire resistant cable and displayed on any MxPro control
panel
• Capable of withstanding single faults • Two types of network available:
between nodes
• Communications bus all achieved using – Standard Network
standard 2 core fire resistant cable Radial configuration
• Fibre optic networking – Fault-tolerant Network Loop
configuration
• Non-confusing zone config (Up to 2000)
Software Overview
• Designed by fire engineers to be
quick, intuitive and easy to use.
• Design Check Calculator
• Dedicated
Service/Config/Maintenance tools
• Virtual panel & logo programming
• Service Tool provides a complete
Device History data base
providing information such as
device installation, test, isolation
to information such as last
activation.
• Windows based
48 Way I/O
• 48 way programmable I/O driver card
• Up to 16 cards can be connected = 768 I/O
• Switch/LED module
• Flexible programming
• Internal RS 485 Bus
LED Mimic Display Card
• Can be mounted locally in a multi-loop panel to
display zones in fire
• Alternatively can be mounted in bespoke remote
enclosure together with a building plan
• All mimics are fully programmable units that
connect to the network
The ipGateway is a web based IP solution
providing the following functionality:
• Internal/External IP Network Access
• Browser in-built to ipGateway
• Direct Network Connectivity
• Full Level 2 Management Control
• Network Event Log
• Events can be sent via Email
MxGraphics
• HD resolution
• 16 million colours
• 2000 graphics & zoom explorer
• Test Instruction Page for operators
• Isolation and fire panel controls
• Unlimited history/log
• Report printing
• Site graphic control
• Site navigation
• Event listings
• History search
SmartCube – What is it?
• SmartCube is a Black-Box PC for remote panel networks that are connected using
a TCP/IP solution.
• Each remote network requires a BMS/Graphical Interface.
• Each remote network connected via Smart Cube supports a maximum of 200
networked panels.
• Maximum number of 2047 remote networked panels using software license
offset.
Smart Cube – How it works?
Advanced Fire Network (see text)
Advanced Electronics RS232 TCP/IP ethernet to local
BMS interface network or the internet
RSM
Maximum number of panels per Network is 200!
Smart Cube – Basic Network Schematic
RS232 to RS232 to RS232 to
monitored monitored monitored
equipment equipment equipment
RSM RSM RSM
module module module
Existing site ethernet network
AMX1
Smart Cube – Advanced Network Schematic
Thank you…..
Questions???
Swarjita Rawool
e-mail - [email protected]
HP - +91 97 6966 1333
