16/05/2024, 16:13 Knuckle Thread DIN 405
Knuckle Thread DIN 405
Specifications of International Thread Standards
Advertising:
They are used in coupling gears and brake rods in railway waggons, valves, slides, fittings and by the fire
brigade. The Knuckle Threads are insensitive to dirt and damages.
Main page The flank angle is 30°.
Help Advertising:
Thread Size Nominal Bolt Thread Nut Thread Pitch TPI
Specifications
Diameter Minor Diameter Minor Diameter mm
ISO Coarse Thread mm mm mm
(metric) DIN 13-1 Rd 8 x 1/10" 8.254 5.460 5.714 2.540 10
Rd 9 x 1/10" 9.254 6.460 6.714 2.540 10
ISO Fine Thread I Rd 10 x 1/10" 10.254 7.460 7.714 2.540 10
(metric) DIN 13-2 Rd 11 x 1/10" 11.254 8.460 8.714 2.540 10
ISO Fine Thread II Rd 12 x 1/10" 12.254 9.460 9.714 2.540 10
(metric) DIN 13-3 Rd 14 x 1/8" 14.318 10.825 11.142 3.175 8
Rd 16 x 1/8" 16.318 12.825 13.142 3.175 8
ISO Fine Thread III
Rd 18 x 1/8" 18.318 14.825 15.142 3.175 8
(metric) DIN 13-4 Rd 20 x 1/8" 20.318 16.825 17.142 3.175 8
ISO Fine Thread IV Rd 22 x 1/8" 22.318 18.825 19.142 3.175 8
(metric) DIN 13-5 Rd 24 x 1/8" 24.318 20.825 21.142 3.175 8
Rd 28 x 1/8" 28.318 24.825 25.142 3.175 8
ISO Fine Thread V
Rd 30 x 1/8" 30.318 26.825 27.142 3.175 8
(metric) DIN 13-6
Rd 32 x 1/8" 32.818 28.825 29.142 3.175 8
ISO Fine Thread VI Rd 34 x 1/8" 34.318 30.825 31.142 3.175 8
(metric) DIN 13-7 Rd 36 x 1/8" 36.318 32.825 33.142 3.175 8
Rd 38 x 1/8" 38.318 34.825 35.142 3.175 8
ISO Fine Thread VII
Rd 40 x 1/6" 40.423 35.767 36.190 4.233 6
(metric) DIN 13-8
Rd 42 x 1/6" 42.423 37.767 38.190 4.233 6
ISO Fine Thread VIII Rd 44 x 1/6" 44.423 39.767 40.190 4.233 6
(metric) DIN 13-9 Rd 46 x 1/6" 46.423 41.767 42.190 4.233 6
Rd 48 x 1/6" 48.423 43.767 44.190 4.233 6
ISO Fine Thread IX
Rd 50 x 1/6" 50.423 45.767 46.190 4.233 6
(metric) DIN 13-10
Rd 52 x 1/6" 52.423 47.767 48.100 4.233 6
ISO Fine Thread X Rd 55 x 1/6" 55.423 50.767 51.190 4.233 6
(metric) DIN 13-11 Rd 58 x 1/6" 58.423 53.767 54.190 4.233 6
Rd 60 x 1/6" 60.423 55.767 56.190 4.233 6
ISO Thread (metric)
Rd 62 x 1/6" 62.423 57.767 58.190 4.233 6
DIN 14-2
Rd 65 x 1/6" 65.423 60.767 61.190 4.233 6
► Knuckle Thread Rd 68 x 1/6" 68.423 63.767 64.190 4.233 6
DIN 405 Rd 70 x 1/6" 70.423 65.767 66.190 4.233 6
Rd 72 x 1/6" 72.423 67.767 68.190 4.233 6
Knuckle Thread
Rd 75 x 1/6" 75.423 70.767 71.190 4.233 6
DIN 20400
Rd 78 x 1/6" 78.423 73.767 74.190 4.233 6
Buttress Fine Thread DIN Rd 80 x 1/6" 80.423 75.767 76.190 4.233 6
514 Rd 82 x 1/6" 82.423 77.767 78.190 4.233 6
Buttress Coarse Thread Rd 85 x 1/6" 85.423 80.767 81.190 4.233 6
Rd 88 x 1/6" 88.423 83.767 84.190 4.233 6
DIN 513
Rd 90 x 1/6" 90.423 85.767 86.190 4.233 6
Buttress Thread 45° Rd 92 x 1/6" 92.423 87.767 88.190 4.233 6
DIN 2781 Rd 95 x 1/6" 95.423 90.767 91.190 4.233 6
Trapezoidal Fine Thread Rd 98 x 1/6" 98.423 93.767 94.190 4.233 6
DIN 103 Rd 100 x 1/6" 100.423 95.767 96.190 4.233 6
Rd 105 x 1/4" 105.635 98.650 99.285 6.350 4
Trapezoidal Coarse Rd 110 x 1/4" 110.635 103.650 104.285 6.350 4
Thread DIN 103 Rd 115 x 1/4" 115.635 108.650 109.285 6.350 4
Valve Thread DIN 7756 Rd 120 x 1/4" 120.635 113.650 114.285 6.350 4
Rd 125 x 1/4" 125.635 118.650 119.285 6.350 4
Cycle Thread DIN 79012
Rd 130 x 1/4" 130.635 123.650 124.285 6.350 4
PG Thread DIN 40430 Rd 135 x 1/4" 135.635 128.650 129.285 6.350 4
Rd 140 x 1/4" 140.635 133.650 134.285 6.350 4
Pipe Thread DIN 158
Rd 145 x 1/4" 145.635 138.650 139.285 6.350 4
Dairy Thread DIN 11851 Rd 150 x 1/4" 150.635 143.650 144.285 6.350 4
Edison Thread Rd 155 x 1/4" 155.635 148.650 149.285 6.350 4
DIN 40400 Rd 160 x 1/4" 160.635 153.650 154.285 6.350 4
Rd 165 x 1/4" 165.635 158.650 159.285 6.350 4
Glass Thread DIN 40450 Rd 170 x 1/4" 170.635 163.650 164.285 6.350 4
Knuckle Thread for glass Rd 175 x 1/4" 175.635 168.650 169.285 6.350 4
containers DIN 168 Rd 180 x 1/4" 180.635 173.650 174.285 6.350 4
Rd 185 x 1/4" 185.635 178.650 179.285 6.350 4
Threads for plastic
Rd 190 x 1/4" 190.635 183.650 184.285 6.350 4
containers DIN 6063
Rd 195 x 1/4" 195.635 188.650 189.285 6.350 4
Camera mount Thread Rd 200 x 1/4" 200.635 193.650 194.285 6.350 4
S. & H. Thread
Sewing-machine Thread
C. E. I. Thread
Löwenherz Thread
Bodmer Thread
French Thread
VDI Thread
Ducommun Steinle
Thread
https://www.gewinde-normen.de/en/knuckle-thread-din-405.html 1/2
16/05/2024, 16:13 Knuckle Thread DIN 405
Hamann Patronen Thread
Thury Thread
Whitworth Instrument
Thread
Whitworth Fine DIN 239
Whitworth Fine DIN 240
Whitworth Fine
DIN LON 282
Whitworth Fine
DIN LON special
Whitworth Fine
DIN LON 286
Whitworth Fine
DIN LON 287
S. J. Thread Advertising:
Sellers Thread
UNC Thread (USA)
UNEF Thread (USA)
UNF Thread (USA)
UNM Thread (USA)
UNR Thread (USA)
UNS Thread (USA)
8-UN Thread (USA)
12-UN Thread (USA)
16-UN Thread (USA)
20-UN Thread (USA)
NPT Thread (USA)
NPTF Thread (USA)
NPSC Thread (USA)
NPSF Thread (USA)
NPSL Thread (USA)
NPSM Thread (USA)
ACME Thread (USA)
STUB ACME Thread
(USA)
Sharp V Thread (USA)
ME Model Engineer
Thread (GB)
BA British Association
(GB)
BSB British Standard
Brass (GB)
BSF Whitworth Fine
Thread (GB)
BSW Whitworth Coarse
Thread (GB)
BSPP Whitworth Pipe
Thread (GB)
BSPT Tapered Whitworth
Pipe Thread (GB)
Conversion Inch-
Fractions to mm
Conversion TPI to pitch
mm
Drill bit sizes
Download
Imprint
Sitemap
https://www.gewinde-normen.de/en/knuckle-thread-din-405.html 2/2
