05-19 [Link].

918 1303 1303 D CompatibilityChangeReporter: Compat change id

reported: 135549675; UID 10009; state: ENABLED
05-19 [Link].918 1303 1303 D CompatibilityChangeReporter: Compat change id
reported: 135549675; UID 10154; state: ENABLED
05-19 [Link].918 1303 1303 I SystemServerTiming: StartBugreportManagerService
05-19 [Link].918 1303 1593 D _V_VivoLightTintController_DC: onBrightnessChanged
brightness=1006 mPowerChange=false
05-19 [Link].918 1303 1373 D _V_DisplayPowerController: updatePowerState:
[Link]=false, mProximity=Unknown,
mScreenOffBecauseOfProximity=false [Link] = ON
mWaitingForNegativeProximity = false callState = 0 isPowerKeyWakeUp = false
05-19 [Link].918 1303 1593 W _V_VivoLightsService: algo brightness 0.24566545
brightness=0.24566545; setBrightness=1006
05-19 [Link].918 1303 1373 D _V_DisplayPowerController:
animateScreenStateChange to target ON
05-19 [Link].918 1303 1373 I _V_DisplayPowerController:
animateScreenStateChange end
05-19 [Link].940 918 1088 D MtkOmxAdpcmDec: MtkOmxAdpcmDec Construct !!!
05-19 [Link].942 918 1088 D MtkOmxAdpcmDec: MtkOmxAdpcmDec Deconstruct !!!
05-19 [Link].949 918 918 D MtkOmxAdpcmDec: MtkOmxAdpcmDec Construct !!!
05-19 [Link].951 918 918 D MtkOmxAdpcmDec: MtkOmxAdpcmDec Deconstruct !!!
05-19 [Link].991 918 918 D MtkOmxApeDec: MtkOmxApeDec::MtkOmxApeDec(APE)
this= 0xea451000
05-19 [Link].051 918 918 D MtkOmxApeDec: ctor:in_size:5184,out_size:5184
05-19 [Link].051 918 918 D MtkOmxApeDec: MtkOmxApeDec::InitAudioParams(APE)
05-19 [Link].060 918 1784 D MtkOmxApeDec: ~dtor- this= 0xea451000
05-19 [Link].088 918 1784 D MtkOmxGsmDec: MtkOmxComponentCreate +++ !!!
05-19 [Link].088 918 1784 D MtkOmxGsmDec: MtkOmxGsmDec Construct !!!
05-19 [Link].088 918 1784 D MtkOmxGsmDec: Init Audio(GSM) Params!!!
05-19 [Link].093 918 918 D MtkOmxGsmDec: MtkOmxGsmDec Deconstruct !!!
05-19 [Link].918 1303 1341 W ActivityManager: Slow operation: 504ms so far, now
at startProcess: done updating pids map
05-19 [Link].918 374 386 I vold : Writing 40 to
/sys/class/bdi/0:129/max_ratio
05-19 [Link].918 374 386 I vold : emulated;999 setState to: 2
05-19 [Link].918 1303 3601 I chatty : uid=1000(system) backup-0 identical 187
lines
05-19 [Link].918 1303 4571 W VivoTaskImpl: occlude resumeTop canOccclude =
false [Link] = false
05-19 [Link].918 1303 1826 W _V_ANRManager: getAnrTracesDir: no trace path
configured
05-19 [Link].101 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].142 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].159 1303 3946 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].191 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].203 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].212 1303 2626 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].236 1303 3946 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].247 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].260 1303 3946 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].272 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].283 1303 2626 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].293 1303 3950 D _V_ActivityManager: StartMode packageName =
[Link] ,pid = -1 ,alwaysRestrict = true ,startMode =
2 ,UidRec:UidRecord{4839184 u0a177 RCVR idle change:uncached procs:1 seq(0,0,0)}
05-19 [Link].918 1303 1488 D ConnectivityService: NetReassign [no changes]
05-19 [Link].918 1303 1357 E KernelCpuSpeedReader: Failed to read cpu-freq:
/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state: open failed: ENOENT (No
such file or directory)
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_FLOAT 203
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_FLOAT 122
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_INT
0.4382157
05-19 [Link].561 917 917 E wificond: vivo add tx_good 163689 tx_bad 87
rx_good 291887 tx_retry 1295
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_FLOAT 89
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_INT
0.105882354
05-19 [Link].075 917 917 E wificond: vivo add tx_good 169188 tx_bad 90
rx_good 300318 tx_retry 1527
05-19 [Link].168 917 917 E wificond: vivo add tx_good 174918 tx_bad 98
rx_good 310080 tx_retry 1826
05-19 [Link].981 917 917 E wificond: vivo add tx_good 180814 tx_bad 100
rx_good 318918 tx_retry 2028
05-19 [Link].918 917 917 E wificond: vivo add tx_good 188298 tx_bad 100
rx_good 331250 tx_retry 2308
05-19 [Link].325 917 917 E wificond: vivo add tx_good 191836 tx_bad 100
rx_good 335557 tx_retry 2456
05-19 [Link].157 917 917 E wificond: vivo add tx_good 201918 tx_bad 102
rx_good 351110 tx_retry 2927
05-19 [Link].517 917 917 E wificond: vivo add tx_good 231034 tx_bad 113
rx_good 399185 tx_retry 4159
05-19 [Link].033 917 917 E wificond: vivo add tx_good 251762 tx_bad 127
rx_good 430804 tx_retry 4918
05-19 [Link].942 917 917 E wificond: vivo add tx_good 274918 tx_bad 133
rx_good 471342 tx_retry 5774
05-19 [Link].524 917 917 E wificond: vivo add tx_good 291889 tx_bad 135
rx_good 503775 tx_retry 6163
05-19 [Link].570 917 917 E wificond: vivo add tx_good 292918 tx_bad 135
rx_good 505868 tx_retry 6185
05-19 [Link].918 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
26945,uid: 10183
05-19 [Link].728 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
29185,uid: 10120
05-19 [Link].332 917 917 E wificond: vivo add tx_good 309188 tx_bad 140
rx_good 533173 tx_retry 6541
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_FLOAT 25
05-19 [Link].368 917 917 E wificond: vivo add tx_good 335937 tx_bad 163
rx_good 580918 tx_retry 7470
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_INT
0.06958824
05-19 [Link].527 917 917 E wificond: vivo add tx_good 342141 tx_bad 165
rx_good 589918 tx_retry 7641
05-19 [Link].708 917 917 E wificond: vivo add tx_good 353790 tx_bad 167
rx_good 609186 tx_retry 7798
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_INT
0.097039215
05-19 [Link].918 1303 1303 E AutoBrightnessSynchronizer: MSG_UPDATE_INT
0.3372549
05-19 [Link].621 917 917 E wificond: vivo add tx_good 371804 tx_bad 179
rx_good 639181 tx_retry 8211
05-19 [Link].749 917 917 E wificond: vivo add tx_good 383600 tx_bad 182
rx_good 659184 tx_retry 8464
05-19 [Link].770 917 917 E wificond: vivo add tx_good 383602 tx_bad 182
rx_good 659188 tx_retry 8464
05-19 [Link].798 917 917 E wificond: vivo add tx_good 390250 tx_bad 182
rx_good 669182 tx_retry 8621
05-19 [Link].391 917 917 E wificond: vivo add tx_good 404653 tx_bad 190
rx_good 691886 tx_retry 9084
05-19 [Link].918 917 917 E wificond: vivo add tx_good 406193 tx_bad 192
rx_good 693639 tx_retry 9135
05-19 [Link].085 917 917 E wificond: vivo add tx_good 2921 tx_bad 0 rx_good
5918 tx_retry 9854
05-19 [Link].684 1303 25541 E ActivityManager: 55% 918/[Link]: 46% user +
9.7% kernel / faults: 88790 minor 4 major
05-19 [Link].685 1303 25541 E ActivityManager: 0.2%
4765/[Link]:remote: 0% user + 0.1% kernel / faults: 2918 minor 12 major
05-19 [Link].537 917 917 E wificond: vivo add tx_good 32618 tx_bad 1 rx_good
57918 tx_retry 10377
05-19 [Link].306 1303 32456 E ActivityManager: 4.9% 918/[Link]: 2.1% user
+ 2.7% kernel / faults: 2219 minor
05-19 [Link].410 917 917 E wificond: vivo add tx_good 52534 tx_bad 1 rx_good
89184 tx_retry 10752
05-19 [Link].408 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
9182,uid: 10183
05-19 [Link].099 917 917 E wificond: vivo add tx_good 82400 tx_bad 3 rx_good
138918 tx_retry 11025
05-19 [Link].284 917 917 E wificond: vivo add tx_good 89185 tx_bad 3 rx_good
152526 tx_retry 11043
05-19 [Link].579 917 917 E wificond: vivo add tx_good 106323 tx_bad 3 rx_good
179180 tx_retry 11252
05-19 [Link].577 917 917 E wificond: vivo add tx_good 111918 tx_bad 3 rx_good
188379 tx_retry 11317
05-19 [Link].604 917 917 E wificond: vivo add tx_good 111918 tx_bad 3 rx_good
188380 tx_retry 11317
05-19 [Link].918 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
24275,uid: 10180
05-19 [Link].418 917 917 E wificond: vivo add tx_good 129186 tx_bad 3 rx_good
216717 tx_retry 11713
05-19 [Link].722 917 917 E wificond: vivo add tx_good 144918 tx_bad 3 rx_good
243754 tx_retry 11960
05-19 [Link].918 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
5731,uid: 99910183
05-19 [Link].082 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
7918,uid: 99910183
05-19 [Link].094 917 917 E wificond: vivo add tx_good 170918 tx_bad 3 rx_good
295387 tx_retry 12182
05-19 [Link].964 917 917 E wificond: vivo add tx_good 192679 tx_bad 15
rx_good 331203 tx_retry 12918
05-19 [Link].978 917 917 E wificond: vivo add tx_good 192911 tx_bad 15
rx_good 331367 tx_retry 12918
05-19 [Link].008 917 917 E wificond: vivo add tx_good 193152 tx_bad 15
rx_good 331736 tx_retry 12918
05-19 [Link].022 917 917 E wificond: vivo add tx_good 194015 tx_bad 15
rx_good 332752 tx_retry 12918
05-19 [Link].036 917 917 E wificond: vivo add tx_good 194334 tx_bad 15
rx_good 333127 tx_retry 12918
05-19 [Link].052 917 917 E wificond: vivo add tx_good 194828 tx_bad 15
rx_good 333618 tx_retry 12918
05-19 [Link].069 917 917 E wificond: vivo add tx_good 194858 tx_bad 15
rx_good 333658 tx_retry 12918
05-19 [Link].450 917 917 E wificond: vivo add tx_good 55918 tx_bad 42 rx_good
80846 tx_retry 14234
05-19 [Link].553 917 917 E wificond: vivo add tx_good 61449 tx_bad 43 rx_good
89918 tx_retry 14396
05-19 [Link].918 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
23746,uid: 10183
05-19 [Link].695 918 25234 I mtkpower_client: perf_lock_rel, hdl:25341,
tid:25234
05-19 [Link].696 479 1594 I libPowerHal: [PD] scn:1 hdl:25341
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].259 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].260 918 25234 I mtkpower_client: ret_hdl:25349
05-19 [Link].260 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25349 hint:-1
pid:918 duration:0 => ret_hdl:25349
05-19 [Link].260 479 1594 I libPowerHal: [PE] scn:3 hdl:25349
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].358 918 25234 I mtkpower_client: perf_lock_rel, hdl:25349,
tid:25234
05-19 [Link].359 479 1594 I libPowerHal: [PD] scn:3 hdl:25349
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].631 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].632 918 25234 I mtkpower_client: ret_hdl:25350
05-19 [Link].632 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25350 hint:-1
pid:918 duration:0 => ret_hdl:25350
05-19 [Link].632 479 1594 I libPowerHal: [PE] scn:2 hdl:25350
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].757 918 25234 I mtkpower_client: perf_lock_rel, hdl:25350,
tid:25234
05-19 [Link].758 479 1594 I libPowerHal: [PD] scn:2 hdl:25350
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].191 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].192 918 25234 I mtkpower_client: ret_hdl:25355
05-19 [Link].192 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25355 hint:-1
pid:918 duration:0 => ret_hdl:25355
05-19 [Link].192 479 1594 I libPowerHal: [PE] scn:1 hdl:25355
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].011 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].012 918 25234 I mtkpower_client: ret_hdl:25357
05-19 [Link].012 918 25234 I mtkpower_client: perf_lock_rel, hdl:25319,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25355,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25321,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25322,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25323,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25324,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25325,
tid:25234
05-19 [Link].013 918 25234 I mtkpower_client: perf_lock_rel, hdl:25327,
tid:25234
05-19 [Link].014 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25357 hint:-1
pid:918 duration:0 => ret_hdl:25357
05-19 [Link].014 479 1594 I libPowerHal: [PE] scn:2 hdl:25357
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].015 479 1594 I libPowerHal: [PD] scn:0 hdl:25319
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].016 479 1594 I libPowerHal: [PD] scn:1 hdl:25355
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].173 918 25234 I mtkpower_client: perf_lock_rel, hdl:25357,
tid:25234
05-19 [Link].174 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].175 479 1594 I libPowerHal: [PD] scn:2 hdl:25357
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].177 918 25234 I mtkpower_client: ret_hdl:25358
05-19 [Link].178 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].180 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25358 hint:-1
pid:918 duration:0 => ret_hdl:25358
05-19 [Link].180 479 1594 I libPowerHal: [PE] scn:0 hdl:25358
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].181 918 25234 I mtkpower_client: ret_hdl:25359
05-19 [Link].183 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25359 hint:-1
pid:918 duration:0 => ret_hdl:25359
05-19 [Link].183 479 1594 I libPowerHal: [PE] scn:1 hdl:25359
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].402 918 25234 I mtkpower_client: perf_lock_rel, hdl:25359,
tid:25234
05-19 [Link].403 479 1594 I libPowerHal: [PD] scn:1 hdl:25359
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].846 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].848 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25360 hint:-1
pid:918 duration:0 => ret_hdl:25360
05-19 [Link].848 479 1594 I libPowerHal: [PE] scn:1 hdl:25360
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].851 918 25234 I mtkpower_client: ret_hdl:25360
05-19 [Link].936 918 25234 I mtkpower_client: perf_lock_rel, hdl:25360,
tid:25234
05-19 [Link].937 479 1594 I libPowerHal: [PD] scn:1 hdl:25360
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].781 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].782 918 25234 I mtkpower_client: ret_hdl:25361
05-19 [Link].782 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25361 hint:-1
pid:918 duration:0 => ret_hdl:25361
05-19 [Link].783 479 1594 I libPowerHal: [PE] scn:1 hdl:25361
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].870 918 25234 I mtkpower_client: perf_lock_rel, hdl:25361,
tid:25234
05-19 [Link].871 479 1594 I libPowerHal: [PD] scn:1 hdl:25361
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].275 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].276 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25362 hint:-1
pid:918 duration:0 => ret_hdl:25362
05-19 [Link].276 479 1594 I libPowerHal: [PE] scn:1 hdl:25362
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].277 918 25234 I mtkpower_client: ret_hdl:25362
05-19 [Link].410 918 25234 I mtkpower_client: perf_lock_rel, hdl:25362,
tid:25234
05-19 [Link].412 479 1594 I libPowerHal: [PD] scn:1 hdl:25362
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].704 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].704 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25363 hint:-1
pid:918 duration:0 => ret_hdl:25363
05-19 [Link].704 479 1594 I libPowerHal: [PE] scn:1 hdl:25363
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].705 918 25234 I mtkpower_client: ret_hdl:25363
05-19 [Link].800 918 25234 I mtkpower_client: perf_lock_rel, hdl:25363,
tid:25234
05-19 [Link].802 479 1594 I libPowerHal: [PD] scn:1 hdl:25363
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].637 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].638 918 25234 I mtkpower_client: ret_hdl:25364
05-19 [Link].638 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25364 hint:-1
pid:918 duration:0 => ret_hdl:25364
05-19 [Link].638 479 1594 I libPowerHal: [PE] scn:1 hdl:25364
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].710 918 25234 I mtkpower_client: perf_lock_rel, hdl:25364,
tid:25234
05-19 [Link].711 479 1594 I libPowerHal: [PD] scn:1 hdl:25364
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].577 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].578 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25370 hint:-1
pid:918 duration:0 => ret_hdl:25370
05-19 [Link].578 479 1594 I libPowerHal: [PE] scn:2 hdl:25370
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].580 918 25234 I mtkpower_client: ret_hdl:25370
05-19 [Link].668 918 25234 I mtkpower_client: perf_lock_rel, hdl:25370,
tid:25234
05-19 [Link].669 479 1594 I libPowerHal: [PD] scn:2 hdl:25370
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].080 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].081 918 25234 I mtkpower_client: ret_hdl:25376
05-19 [Link].082 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25376 hint:-1
pid:918 duration:0 => ret_hdl:25376
05-19 [Link].082 479 1594 I libPowerHal: [PE] scn:2 hdl:25376
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].207 918 25234 I mtkpower_client: perf_lock_rel, hdl:25376,
tid:25234
05-19 [Link].208 479 1594 I libPowerHal: [PD] scn:2 hdl:25376
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].501 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].502 918 25234 I mtkpower_client: ret_hdl:25380
05-19 [Link].502 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25380 hint:-1
pid:918 duration:0 => ret_hdl:25380
05-19 [Link].502 479 1594 I libPowerHal: [PE] scn:1 hdl:25380
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].601 918 25234 I mtkpower_client: perf_lock_rel, hdl:25380,
tid:25234
05-19 [Link].601 479 1594 I libPowerHal: [PD] scn:1 hdl:25380
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].017 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].018 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25384 hint:-1
pid:918 duration:0 => ret_hdl:25384
05-19 [Link].018 479 1594 I libPowerHal: [PE] scn:1 hdl:25384
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].019 918 25234 I mtkpower_client: ret_hdl:25384
05-19 [Link].148 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].149 918 25234 I mtkpower_client: ret_hdl:25386
05-19 [Link].149 918 25234 I mtkpower_client: perf_lock_rel, hdl:25358,
tid:25234
05-19 [Link].149 918 25234 I mtkpower_client: perf_lock_rel, hdl:25384,
tid:25234
05-19 [Link].150 918 25234 I mtkpower_client: perf_lock_rel, hdl:25321,
tid:25234
05-19 [Link].150 918 25234 I mtkpower_client: perf_lock_rel, hdl:25322,
tid:25234
05-19 [Link].150 918 25234 I mtkpower_client: perf_lock_rel, hdl:25323,
tid:25234
05-19 [Link].150 918 25234 I mtkpower_client: perf_lock_rel, hdl:25324,
tid:25234
05-19 [Link].150 918 25234 I mtkpower_client: perf_lock_rel, hdl:25325,
tid:25234
05-19 [Link].150 918 25234 I mtkpower_client: perf_lock_rel, hdl:25327,
tid:25234
05-19 [Link].151 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25386 hint:-1
pid:918 duration:0 => ret_hdl:25386
05-19 [Link].151 479 1594 I libPowerHal: [PE] scn:2 hdl:25386
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].151 479 1594 I libPowerHal: [PD] scn:0 hdl:25358
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].153 479 1594 I libPowerHal: [PD] scn:1 hdl:25384
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].246 918 25234 I mtkpower_client: perf_lock_rel, hdl:25386,
tid:25234
05-19 [Link].246 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].247 479 1594 I libPowerHal: [PD] scn:2 hdl:25386
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].249 918 25234 I mtkpower_client: ret_hdl:25387
05-19 [Link].249 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].249 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25387 hint:-1
pid:918 duration:0 => ret_hdl:25387
05-19 [Link].249 479 1594 I libPowerHal: [PE] scn:0 hdl:25387
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].251 918 25234 I mtkpower_client: ret_hdl:25388
05-19 [Link].251 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].251 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25388 hint:-1
pid:918 duration:0 => ret_hdl:25388
05-19 [Link].251 479 1594 I libPowerHal: [PE] scn:1 hdl:25388
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].254 918 25234 I mtkpower_client: ret_hdl:25389
05-19 [Link].254 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].254 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25389 hint:-1
pid:918 duration:0 => ret_hdl:25389
05-19 [Link].254 479 1594 I libPowerHal: [PE] scn:2 hdl:25389
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].256 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25390 hint:-1
pid:918 duration:0 => ret_hdl:25390
05-19 [Link].256 479 1594 I libPowerHal: [PE] scn:3 hdl:25390
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].257 918 25234 I mtkpower_client: ret_hdl:25390
05-19 [Link].257 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].257 918 25234 I mtkpower_client: ret_hdl:25391
05-19 [Link].257 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].257 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25391 hint:-1
pid:918 duration:0 => ret_hdl:25391
05-19 [Link].258 479 1594 I libPowerHal: [PE] scn:4 hdl:25391
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].258 918 25234 I mtkpower_client: ret_hdl:25392
05-19 [Link].258 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].258 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25392 hint:-1
pid:918 duration:0 => ret_hdl:25392
05-19 [Link].258 479 1594 I libPowerHal: [PE] scn:5 hdl:25392
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].260 918 25234 I mtkpower_client: ret_hdl:25393
05-19 [Link].260 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].260 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25393 hint:-1
pid:918 duration:0 => ret_hdl:25393
05-19 [Link].261 479 1594 I libPowerHal: [PE] scn:6 hdl:25393
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].262 918 25234 I mtkpower_client: ret_hdl:25394
05-19 [Link].262 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25394 hint:-1
pid:918 duration:0 => ret_hdl:25394
05-19 [Link].262 479 1594 I libPowerHal: [PE] scn:7 hdl:25394
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].351 918 25234 I mtkpower_client: perf_lock_rel, hdl:25394,
tid:25234
05-19 [Link].360 479 1594 I libPowerHal: [PD] scn:7 hdl:25394
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].458 918 25234 I mtkpower_client: perf_lock_rel, hdl:25393,
tid:25234
05-19 [Link].459 479 1594 I libPowerHal: [PD] scn:6 hdl:25393
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].482 918 25234 I mtkpower_client: perf_lock_rel, hdl:25392,
tid:25234
05-19 [Link].483 918 25234 I mtkpower_client: perf_lock_rel, hdl:25391,
tid:25234
05-19 [Link].483 918 25234 I mtkpower_client: perf_lock_rel, hdl:25390,
tid:25234
05-19 [Link].483 479 1594 I libPowerHal: [PD] scn:5 hdl:25392
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].484 479 1594 I libPowerHal: [PD] scn:4 hdl:25391
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].486 479 1594 I libPowerHal: [PD] scn:3 hdl:25390
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].621 918 25234 I mtkpower_client: perf_lock_rel, hdl:25389,
tid:25234
05-19 [Link].621 918 25234 I mtkpower_client: perf_lock_rel, hdl:25388,
tid:25234
05-19 [Link].622 479 1594 I libPowerHal: [PD] scn:2 hdl:25389
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].623 479 1594 I libPowerHal: [PD] scn:1 hdl:25388
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].152 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].153 918 25234 I mtkpower_client: ret_hdl:25403
05-19 [Link].153 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25403 hint:-1
pid:918 duration:0 => ret_hdl:25403
05-19 [Link].153 479 1594 I libPowerHal: [PE] scn:4 hdl:25403
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].253 918 25234 I mtkpower_client: perf_lock_rel, hdl:25403,
tid:25234
05-19 [Link].254 479 1594 I libPowerHal: [PD] scn:4 hdl:25403
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].087 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].088 918 25234 I mtkpower_client: ret_hdl:25405
05-19 [Link].088 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25405 hint:-1
pid:918 duration:0 => ret_hdl:25405
05-19 [Link].088 479 1594 I libPowerHal: [PE] scn:1 hdl:25405
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].184 918 25234 I mtkpower_client: perf_lock_rel, hdl:25405,
tid:25234
05-19 [Link].185 479 1594 I libPowerHal: [PD] scn:1 hdl:25405
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].018 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].018 918 25234 I mtkpower_client: ret_hdl:25406
05-19 [Link].019 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25406 hint:-1
pid:918 duration:0 => ret_hdl:25406
05-19 [Link].019 479 1594 I libPowerHal: [PE] scn:1 hdl:25406
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].120 918 25234 I mtkpower_client: perf_lock_rel, hdl:25406,
tid:25234
05-19 [Link].122 479 1594 I libPowerHal: [PD] scn:1 hdl:25406
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].958 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].958 918 25234 I mtkpower_client: ret_hdl:25407
05-19 [Link].959 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25407 hint:-1
pid:918 duration:0 => ret_hdl:25407
05-19 [Link].959 479 1594 I libPowerHal: [PE] scn:1 hdl:25407
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].050 918 25234 I mtkpower_client: perf_lock_rel, hdl:25407,
tid:25234
05-19 [Link].052 479 1594 I libPowerHal: [PD] scn:1 hdl:25407
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].485 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].485 918 25234 I mtkpower_client: ret_hdl:25413
05-19 [Link].487 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25413 hint:-1
pid:918 duration:0 => ret_hdl:25413
05-19 [Link].487 479 1594 I libPowerHal: [PE] scn:2 hdl:25413
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].692 918 25234 I mtkpower_client: perf_lock_rel, hdl:25413,
tid:25234
05-19 [Link].693 479 1594 I libPowerHal: [PD] scn:2 hdl:25413
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].559 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].560 918 25234 I mtkpower_client: ret_hdl:25419
05-19 [Link].560 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25419 hint:-1
pid:918 duration:0 => ret_hdl:25419
05-19 [Link].560 479 1594 I libPowerHal: [PE] scn:1 hdl:25419
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].652 918 25234 I mtkpower_client: perf_lock_rel, hdl:25419,
tid:25234
05-19 [Link].653 479 1594 I libPowerHal: [PD] scn:1 hdl:25419
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].482 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].483 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25425 hint:-1
pid:918 duration:0 => ret_hdl:25425
05-19 [Link].483 479 1594 I libPowerHal: [PE] scn:2 hdl:25425
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].483 918 25234 I mtkpower_client: ret_hdl:25425
05-19 [Link].585 918 25234 I mtkpower_client: perf_lock_rel, hdl:25425,
tid:25234
05-19 [Link].586 479 1594 I libPowerHal: [PD] scn:2 hdl:25425
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].419 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].420 918 25234 I mtkpower_client: ret_hdl:25430
05-19 [Link].420 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25430 hint:-1
pid:918 duration:0 => ret_hdl:25430
05-19 [Link].420 479 1594 I libPowerHal: [PE] scn:4 hdl:25430
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].520 918 25234 I mtkpower_client: perf_lock_rel, hdl:25430,
tid:25234
05-19 [Link].521 479 1594 I libPowerHal: [PD] scn:4 hdl:25430
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].356 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].357 918 25234 I mtkpower_client: ret_hdl:25433
05-19 [Link].358 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25433 hint:-1
pid:918 duration:0 => ret_hdl:25433
05-19 [Link].358 479 1594 I libPowerHal: [PE] scn:2 hdl:25433
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].459 918 25234 I mtkpower_client: perf_lock_rel, hdl:25433,
tid:25234
05-19 [Link].460 479 1594 I libPowerHal: [PD] scn:2 hdl:25433
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].606 918 25234 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:25234
05-19 [Link].607 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25434 hint:-1
pid:918 duration:0 => ret_hdl:25434
05-19 [Link].607 479 1594 I libPowerHal: [PE] scn:1 hdl:25434
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].608 918 25234 I mtkpower_client: ret_hdl:25434
05-19 [Link].774 918 32761 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9, ??(0x7f00002b)) ERROR:
IncorrectStateOperation(0x80001018)
05-19 [Link].483 918 11677 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9, ??(0x7f00002b)) ERROR:
IncorrectStateOperation(0x80001018)
05-19 [Link].490 918 24032 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25394,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25393,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25392,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25391,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25390,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25389,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25434,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25387,
tid:24032
05-19 [Link].500 918 24032 I mtkpower_client: perf_lock_rel, hdl:25386,
tid:24032
05-19 [Link].502 479 1594 I libPowerHal: [PD] scn:1 hdl:25434
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].503 479 1594 I libPowerHal: [PD] scn:0 hdl:25387
lock_user:[email protected] pid:918 tid:25234 dur:0
05-19 [Link].506 918 24032 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].507 918 24032 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].507 918 24032 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].507 918 24032 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].918 23232 23232 E SlowAppComponent: 0ms: ModalActivity
instantiating…
05-19 [Link].918 23232 23232 E SlowAppComponent: 963ms: TransparentModalActivity
instantiating…
05-19 [Link].918 23232 23232 E SlowAppComponent: Main thread was blocked for
2782ms in the foreground starting with ModalActivity
05-19 [Link].370 918 5724 E OMXNodeInstance:
setParameter(0xea0d1804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].370 918 1065 E OMXNodeInstance:
getParameter(0xea0d1804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].377 918 5724 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].377 918 5724 E OMXNodeInstance:
setConfig(0xea0d1804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].397 918 5724 E OMXNodeInstance:
getConfig(0xea0d1804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].398 918 32761 E OMXNodeInstance:
getConfig(0xea0d1804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].575 918 25818 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].575 918 25818 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].576 918 25818 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].576 918 25818 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].576 918 25818 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].666 918 25818 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].017 918 25817 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].017 918 25817 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].017 918 25817 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].018 918 25817 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].268 918 5033 E OMXNodeInstance:
setParameter(0xea0d1804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].268 918 5033 E OMXNodeInstance:
getParameter(0xea0d1804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].271 918 5033 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].271 918 5033 E OMXNodeInstance:
setConfig(0xea0d1804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].271 918 5033 E OMXNodeInstance:
getConfig(0xea0d1804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].272 918 1085 E OMXNodeInstance:
getConfig(0xea0d1804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].325 918 25969 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].325 918 25969 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].326 918 25969 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].326 918 25969 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].327 918 25969 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].380 918 25969 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].735 918 5033 E OMXNodeInstance:
setParameter(0xe9e41004:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].735 918 32761 E OMXNodeInstance:
getParameter(0xe9e41004:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].738 918 32761 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].738 918 32761 E OMXNodeInstance:
setConfig(0xe9e41004:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].739 918 32761 E OMXNodeInstance:
getConfig(0xe9e41004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].739 918 1065 E OMXNodeInstance:
getConfig(0xe9e41004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].862 918 25982 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].502 918 25981 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].505 918 25981 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].505 918 25981 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].505 918 25981 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].905 918 1960 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].905 918 1960 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].909 918 5724 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].909 918 5724 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].910 918 5033 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].910 918 5033 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].912 918 32761 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].943 918 26063 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].943 918 26063 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].944 918 26063 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].944 918 26063 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].944 918 26063 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].955 918 26063 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ce810
05-19 [Link].956 918 26063 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].956 918 26063 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].164 918 26063 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].164 918 26063 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 10257
05-19 [Link].165 918 26063 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].165 918 26063 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].169 918 26072 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26072
05-19 [Link].172 918 26072 I mtkpower_client: ret_hdl:25501
05-19 [Link].172 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25501 hint:-1
pid:918 duration:0 => ret_hdl:25501
05-19 [Link].172 479 1594 I libPowerHal: [PE] scn:0 hdl:25501
lock_user:[email protected] pid:918 tid:26072 dur:0
05-19 [Link].196 918 26063 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].196 918 26063 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].196 918 26063 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].196 918 26063 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].196 918 26063 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].387 918 26071 I mtkpower_client: perf_lock_rel, hdl:25501,
tid:26071
05-19 [Link].387 918 26071 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26071
05-19 [Link].388 479 1594 I libPowerHal: [PD] scn:0 hdl:25501
lock_user:[email protected] pid:918 tid:26072 dur:0
05-19 [Link].390 918 26071 I mtkpower_client: ret_hdl:25502
05-19 [Link].390 918 26071 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26071
05-19 [Link].392 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25502 hint:-1
pid:918 duration:0 => ret_hdl:25502
05-19 [Link].392 479 1594 I libPowerHal: [PE] scn:0 hdl:25502
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].393 918 26071 I mtkpower_client: ret_hdl:25503
05-19 [Link].393 918 26071 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26071
05-19 [Link].394 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25503 hint:-1
pid:918 duration:0 => ret_hdl:25503
05-19 [Link].395 479 1594 I libPowerHal: [PE] scn:1 hdl:25503
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].396 918 26071 I mtkpower_client: ret_hdl:25504
05-19 [Link].396 918 26071 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26071
05-19 [Link].398 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25504 hint:-1
pid:918 duration:0 => ret_hdl:25504
05-19 [Link].399 479 1594 I libPowerHal: [PE] scn:2 hdl:25504
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].402 918 26071 I mtkpower_client: ret_hdl:25505
05-19 [Link].402 918 26071 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26071
05-19 [Link].404 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25505 hint:-1
pid:918 duration:0 => ret_hdl:25505
05-19 [Link].404 479 1594 I libPowerHal: [PE] scn:3 hdl:25505
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].405 918 26071 I mtkpower_client: ret_hdl:25506
05-19 [Link].405 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25506 hint:-1
pid:918 duration:0 => ret_hdl:25506
05-19 [Link].406 479 1594 I libPowerHal: [PE] scn:4 hdl:25506
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].477 918 26071 I mtkpower_client: perf_lock_rel, hdl:25506,
tid:26071
05-19 [Link].478 479 1594 I libPowerHal: [PD] scn:4 hdl:25506
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].536 918 26071 I mtkpower_client: perf_lock_rel, hdl:25505,
tid:26071
05-19 [Link].536 918 26071 I mtkpower_client: perf_lock_rel, hdl:25504,
tid:26071
05-19 [Link].537 479 1594 I libPowerHal: [PD] scn:3 hdl:25505
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].537 479 1594 I libPowerHal: [PD] scn:2 hdl:25504
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].588 918 26071 I mtkpower_client: perf_lock_rel, hdl:25503,
tid:26071
05-19 [Link].589 479 1594 I libPowerHal: [PD] scn:1 hdl:25503
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].714 918 1780 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].714 918 1780 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].723 918 6021 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].723 918 6021 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].725 918 5020 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].725 918 1088 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].728 918 1088 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].801 918 26114 E VDO_LOG : GetDecoderAPI hWrapper 0xea081810
05-19 [Link].801 918 26114 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].801 918 26114 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].802 918 26114 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].802 918 26114 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18836
05-19 [Link].802 918 26114 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde0c7000
05-19 [Link].802 918 26114 E VDO_LOG : vp9_dec_init() u4Width 704, u4Height
1216, Offset 0, Padding 0
05-19 [Link].824 918 26120 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26120
05-19 [Link].825 918 26120 I mtkpower_client: ret_hdl:25512
05-19 [Link].825 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25512 hint:-1
pid:918 duration:0 => ret_hdl:25512
05-19 [Link].825 479 1594 I libPowerHal: [PE] scn:1 hdl:25512
lock_user:[email protected] pid:918 tid:26120 dur:0
05-19 [Link].848 918 26062 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].871 918 26114 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].871 918 26114 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].872 918 26114 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].872 918 26114 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].872 918 26114 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].876 918 26062 I mtkpower_client: perf_lock_rel, hdl:25506,
tid:26062
05-19 [Link].877 918 26062 I mtkpower_client: perf_lock_rel, hdl:25505,
tid:26062
05-19 [Link].877 918 26062 I mtkpower_client: perf_lock_rel, hdl:25504,
tid:26062
05-19 [Link].877 918 26062 I mtkpower_client: perf_lock_rel, hdl:25503,
tid:26062
05-19 [Link].877 918 26062 I mtkpower_client: perf_lock_rel, hdl:25502,
tid:26062
05-19 [Link].878 918 26062 I mtkpower_client: perf_lock_rel, hdl:25501,
tid:26062
05-19 [Link].881 479 1594 I libPowerHal: [PD] scn:0 hdl:25502
lock_user:[email protected] pid:918 tid:26071 dur:0
05-19 [Link].040 918 26119 I mtkpower_client: perf_lock_rel, hdl:25512,
tid:26119
05-19 [Link].040 918 26119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26119
05-19 [Link].042 479 1594 I libPowerHal: [PD] scn:1 hdl:25512
lock_user:[email protected] pid:918 tid:26120 dur:0
05-19 [Link].043 918 26119 I mtkpower_client: ret_hdl:25513
05-19 [Link].043 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25513 hint:-1
pid:918 duration:0 => ret_hdl:25513
05-19 [Link].044 479 1594 I libPowerHal: [PE] scn:0 hdl:25513
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].364 918 26119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26119
05-19 [Link].366 918 26119 I mtkpower_client: ret_hdl:25515
05-19 [Link].366 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25515 hint:-1
pid:918 duration:0 => ret_hdl:25515
05-19 [Link].367 479 1594 I libPowerHal: [PE] scn:2 hdl:25515
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].441 918 26119 I mtkpower_client: perf_lock_rel, hdl:25515,
tid:26119
05-19 [Link].442 479 1594 I libPowerHal: [PD] scn:2 hdl:25515
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].901 918 26119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26119
05-19 [Link].906 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25518 hint:-1
pid:918 duration:0 => ret_hdl:25518
05-19 [Link].906 479 1594 I libPowerHal: [PE] scn:2 hdl:25518
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].907 918 26119 I mtkpower_client: ret_hdl:25518
05-19 [Link].089 918 26119 I mtkpower_client: perf_lock_rel, hdl:25518,
tid:26119
05-19 [Link].090 479 1594 I libPowerHal: [PD] scn:2 hdl:25518
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].068 918 26119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26119
05-19 [Link].071 918 26119 I mtkpower_client: ret_hdl:25521
05-19 [Link].072 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25521 hint:-1
pid:918 duration:0 => ret_hdl:25521
05-19 [Link].072 479 1594 I libPowerHal: [PE] scn:3 hdl:25521
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].136 918 1784 E OMXNodeInstance:
setParameter(0xea5f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].137 918 918 E OMXNodeInstance:
getParameter(0xea5f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].141 918 13399 E MtkOmxVdecEx: [0xea5f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].141 918 13399 E OMXNodeInstance:
setConfig(0xea5f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].143 918 1064 E OMXNodeInstance:
getParameter(0xea5f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].144 918 11677 E OMXNodeInstance:
getConfig(0xea5f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].145 918 11717 E OMXNodeInstance:
getConfig(0xea5f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].150 918 26119 I mtkpower_client: perf_lock_rel, hdl:25521,
tid:26119
05-19 [Link].152 479 1594 I libPowerHal: [PD] scn:3 hdl:25521
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].232 918 26206 E VDO_LOG : GetDecoderAPI hWrapper 0xea29c810
05-19 [Link].232 918 26206 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].232 918 26206 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].234 918 26206 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].234 918 26206 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 26644
05-19 [Link].234 918 26206 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1f47000
05-19 [Link].234 918 26206 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].243 918 26212 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26212
05-19 [Link].245 918 26212 I mtkpower_client: ret_hdl:25522
05-19 [Link].245 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25522 hint:-1
pid:918 duration:0 => ret_hdl:25522
05-19 [Link].245 479 1594 I libPowerHal: [PE] scn:2 hdl:25522
lock_user:[email protected] pid:918 tid:26212 dur:0
05-19 [Link].249 918 26206 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].249 918 26206 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].249 918 26206 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].249 918 26206 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].249 918 26206 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].326 918 26113 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].351 918 26113 I mtkpower_client: perf_lock_rel, hdl:25521,
tid:26113
05-19 [Link].351 918 26113 I mtkpower_client: perf_lock_rel, hdl:25513,
tid:26113
05-19 [Link].352 918 26113 I mtkpower_client: perf_lock_rel, hdl:25512,
tid:26113
05-19 [Link].354 479 1594 I libPowerHal: [PD] scn:0 hdl:25513
lock_user:[email protected] pid:918 tid:26119 dur:0
05-19 [Link].712 918 26211 I mtkpower_client: perf_lock_rel, hdl:25522,
tid:26211
05-19 [Link].713 918 26211 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26211
05-19 [Link].713 479 1594 I libPowerHal: [PD] scn:2 hdl:25522
lock_user:[email protected] pid:918 tid:26212 dur:0
05-19 [Link].715 918 26211 I mtkpower_client: ret_hdl:25523
05-19 [Link].715 918 26211 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26211
05-19 [Link].716 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25523 hint:-1
pid:918 duration:0 => ret_hdl:25523
05-19 [Link].716 479 1594 I libPowerHal: [PE] scn:0 hdl:25523
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].716 918 26211 I mtkpower_client: ret_hdl:25524
05-19 [Link].718 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25524 hint:-1
pid:918 duration:0 => ret_hdl:25524
05-19 [Link].718 479 1594 I libPowerHal: [PE] scn:2 hdl:25524
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].906 918 26211 I mtkpower_client: perf_lock_rel, hdl:25524,
tid:26211
05-19 [Link].907 479 1594 I libPowerHal: [PD] scn:2 hdl:25524
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].992 918 11677 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].993 918 13399 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].998 918 1064 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].998 918 1064 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].998 918 9097 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].999 918 11677 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].000 918 11677 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].086 918 26271 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e3810
05-19 [Link].087 918 26271 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].087 918 26271 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].087 918 26271 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].087 918 26271 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8658
05-19 [Link].088 918 26271 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].088 918 26271 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].095 918 26271 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].095 918 26271 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].095 918 26271 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].096 918 26271 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].096 918 26271 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].096 918 26275 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26275
05-19 [Link].096 918 26275 I mtkpower_client: ret_hdl:25530
05-19 [Link].097 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25530 hint:-1
pid:918 duration:0 => ret_hdl:25530
05-19 [Link].097 479 1594 I libPowerHal: [PE] scn:1 hdl:25530
lock_user:[email protected] pid:918 tid:26275 dur:0
05-19 [Link].145 918 26211 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26211
05-19 [Link].147 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25531 hint:-1
pid:918 duration:0 => ret_hdl:25531
05-19 [Link].147 479 1594 I libPowerHal: [PE] scn:3 hdl:25531
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].149 918 26211 I mtkpower_client: ret_hdl:25531
05-19 [Link].149 918 26211 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26211
05-19 [Link].235 918 26211 I mtkpower_client: ret_hdl:25532
05-19 [Link].239 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25532 hint:-1
pid:918 duration:0 => ret_hdl:25532
05-19 [Link].239 479 1594 I libPowerHal: [PE] scn:4 hdl:25532
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].244 918 26205 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].266 918 26205 I mtkpower_client: perf_lock_rel, hdl:25532,
tid:26205
05-19 [Link].266 918 26205 I mtkpower_client: perf_lock_rel, hdl:25531,
tid:26205
05-19 [Link].266 918 26205 I mtkpower_client: perf_lock_rel, hdl:25523,
tid:26205
05-19 [Link].266 918 26205 I mtkpower_client: perf_lock_rel, hdl:25522,
tid:26205
05-19 [Link].268 479 1594 I libPowerHal: [PD] scn:4 hdl:25532
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].269 479 1594 I libPowerHal: [PD] scn:3 hdl:25531
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].270 479 1594 I libPowerHal: [PD] scn:0 hdl:25523
lock_user:[email protected] pid:918 tid:26211 dur:0
05-19 [Link].438 918 26274 I mtkpower_client: perf_lock_rel, hdl:25530,
tid:26274
05-19 [Link].438 918 26274 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26274
05-19 [Link].439 918 26274 I mtkpower_client: ret_hdl:25533
05-19 [Link].441 479 1594 I libPowerHal: [PD] scn:1 hdl:25530
lock_user:[email protected] pid:918 tid:26275 dur:0
05-19 [Link].442 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25533 hint:-1
pid:918 duration:0 => ret_hdl:25533
05-19 [Link].442 479 1594 I libPowerHal: [PE] scn:0 hdl:25533
lock_user:[email protected] pid:918 tid:26274 dur:0
05-19 [Link].645 918 26270 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].702 918 26270 I mtkpower_client: perf_lock_rel, hdl:25533,
tid:26270
05-19 [Link].702 918 26270 I mtkpower_client: perf_lock_rel, hdl:25530,
tid:26270
05-19 [Link].704 918 26270 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].704 918 26270 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].705 479 1594 I libPowerHal: [PD] scn:0 hdl:25533
lock_user:[email protected] pid:918 tid:26274 dur:0
05-19 [Link].705 918 26270 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].705 918 26270 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].758 918 6021 E OMXNodeInstance:
setParameter(0xea5f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].760 918 6021 E OMXNodeInstance:
getParameter(0xea5f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].764 918 6021 E MtkOmxVdecEx: [0xea5f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].765 918 6021 E OMXNodeInstance:
setConfig(0xea5f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].767 918 6021 E OMXNodeInstance:
getParameter(0xea5f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].767 918 6021 E OMXNodeInstance:
getConfig(0xea5f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].768 918 6021 E OMXNodeInstance:
getConfig(0xea5f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].857 918 26378 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].857 918 26378 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].857 918 26378 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].857 918 26378 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].857 918 26378 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].858 918 26378 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e3810
05-19 [Link].858 918 26378 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].858 918 26378 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].863 918 26378 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].863 918 26378 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 54048
05-19 [Link].863 918 26378 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4a69000
05-19 [Link].863 918 26378 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].869 918 26386 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26386
05-19 [Link].874 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25542 hint:-1
pid:918 duration:0 => ret_hdl:25542
05-19 [Link].874 479 1594 I libPowerHal: [PE] scn:3 hdl:25542
lock_user:[email protected] pid:918 tid:26386 dur:0
05-19 [Link].877 918 26386 I mtkpower_client: ret_hdl:25542
05-19 [Link].887 918 26378 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].887 918 26378 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].887 918 26378 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].887 918 26378 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].887 918 26378 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].918 507 922 V APM_AudioPolicyManager: stopOutput portId 1007
05-19 [Link].918 507 1178 E _V_FeatureManager: erro!!,gFeatureNotifyCallback =
NULL
05-19 [Link].918 507 922 D APM_AudioPolicyManager:
[MTK_APM_Output]stopOutput() output 21, stream 3, session 4233 portId 1007
05-19 [Link].918 507 922 V APM_AudioPolicyManager: setBeaconMute(1)
mBeaconMuteRefCount=0 mBeaconPlayingRefCount=0
05-19 [Link].918 507 1178 E _V_FeatureManager: erro!!,gFeatureNotifyCallback =
NULL
05-19 [Link].918 507 922 V APM_AudioPolicyManager: getNewOutputDevices
selected devices AUDIO_DEVICE_NONE
05-19 [Link].057 918 6021 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].057 918 6021 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].071 918 6021 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].071 918 6021 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].074 918 6021 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].075 918 6021 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].076 918 6021 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].170 918 26424 E VDO_LOG : GetDecoderAPI hWrapper 0xea081810
05-19 [Link].171 918 26424 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].171 918 26424 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].172 918 26424 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].172 918 26424 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8658
05-19 [Link].172 918 26424 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde17e000
05-19 [Link].172 918 26424 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].210 918 26377 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].211 918 26428 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26428
05-19 [Link].212 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25545 hint:-1
pid:918 duration:0 => ret_hdl:25545
05-19 [Link].213 479 1594 I libPowerHal: [PE] scn:1 hdl:25545
lock_user:[email protected] pid:918 tid:26428 dur:0
05-19 [Link].213 918 26428 I mtkpower_client: ret_hdl:25545
05-19 [Link].220 918 26377 I mtkpower_client: perf_lock_rel, hdl:25542,
tid:26377
05-19 [Link].224 479 1594 I libPowerHal: [PD] scn:3 hdl:25542
lock_user:[email protected] pid:918 tid:26386 dur:0
05-19 [Link].311 918 26424 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].312 918 26424 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].312 918 26424 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].312 918 26424 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].312 918 26424 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].679 918 26427 I mtkpower_client: perf_lock_rel, hdl:25545,
tid:26427
05-19 [Link].685 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].686 479 1594 I libPowerHal: [PD] scn:1 hdl:25545
lock_user:[email protected] pid:918 tid:26428 dur:0
05-19 [Link].688 918 26427 I mtkpower_client: ret_hdl:25546
05-19 [Link].688 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].689 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25546 hint:-1
pid:918 duration:0 => ret_hdl:25546
05-19 [Link].689 479 1594 I libPowerHal: [PE] scn:1 hdl:25546
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].691 918 26427 I mtkpower_client: ret_hdl:25547
05-19 [Link].691 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].693 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25547 hint:-1
pid:918 duration:0 => ret_hdl:25547
05-19 [Link].693 479 1594 I libPowerHal: [PE] scn:2 hdl:25547
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].695 918 26427 I mtkpower_client: ret_hdl:25548
05-19 [Link].697 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25548 hint:-1
pid:918 duration:0 => ret_hdl:25548
05-19 [Link].697 479 1594 I libPowerHal: [PE] scn:3 hdl:25548
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].868 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].869 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25549 hint:-1
pid:918 duration:0 => ret_hdl:25549
05-19 [Link].869 479 1594 I libPowerHal: [PE] scn:4 hdl:25549
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].872 918 26427 I mtkpower_client: ret_hdl:25549
05-19 [Link].028 918 26427 I mtkpower_client: perf_lock_rel, hdl:25549,
tid:26427
05-19 [Link].029 479 1594 I libPowerHal: [PD] scn:4 hdl:25549
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].035 918 26427 I mtkpower_client: perf_lock_rel, hdl:25548,
tid:26427
05-19 [Link].044 479 1594 I libPowerHal: [PD] scn:3 hdl:25548
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].247 918 26427 I mtkpower_client: perf_lock_rel, hdl:25547,
tid:26427
05-19 [Link].250 479 1594 I libPowerHal: [PD] scn:2 hdl:25547
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].918 501 26508 I mtkpower_client: perf_lock_rel, hdl:25551,
tid:26508
05-19 [Link].972 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].974 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25555 hint:-1
pid:918 duration:0 => ret_hdl:25555
05-19 [Link].974 479 1594 I libPowerHal: [PE] scn:2 hdl:25555
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].974 918 26427 I mtkpower_client: ret_hdl:25555
05-19 [Link].974 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].978 918 26427 I mtkpower_client: ret_hdl:25556
05-19 [Link].978 918 26427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26427
05-19 [Link].978 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25556 hint:-1
pid:918 duration:0 => ret_hdl:25556
05-19 [Link].978 479 1594 I libPowerHal: [PE] scn:3 hdl:25556
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].980 918 26427 I mtkpower_client: ret_hdl:25557
05-19 [Link].981 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25557 hint:-1
pid:918 duration:0 => ret_hdl:25557
05-19 [Link].981 479 1594 I libPowerHal: [PE] scn:4 hdl:25557
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].041 918 9097 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].041 918 9097 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].045 918 9097 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].045 918 9097 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].046 918 13399 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].046 918 1064 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].047 918 1721 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].125 918 26519 E VDO_LOG : GetDecoderAPI hWrapper 0xea241810
05-19 [Link].125 918 26519 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].125 918 26519 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].126 918 26519 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].126 918 26519 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 54048
05-19 [Link].126 918 26519 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0788000
05-19 [Link].126 918 26519 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].126 918 26423 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].137 918 26526 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26526
05-19 [Link].139 918 26526 I mtkpower_client: ret_hdl:25558
05-19 [Link].140 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25558 hint:-1
pid:918 duration:0 => ret_hdl:25558
05-19 [Link].140 479 1594 I libPowerHal: [PE] scn:5 hdl:25558
lock_user:[email protected] pid:918 tid:26526 dur:0
05-19 [Link].162 918 26423 I mtkpower_client: perf_lock_rel, hdl:25557,
tid:26423
05-19 [Link].162 918 26423 I mtkpower_client: perf_lock_rel, hdl:25556,
tid:26423
05-19 [Link].164 479 1594 I libPowerHal: [PD] scn:4 hdl:25557
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].164 918 26423 I mtkpower_client: perf_lock_rel, hdl:25555,
tid:26423
05-19 [Link].165 918 26423 I mtkpower_client: perf_lock_rel, hdl:25546,
tid:26423
05-19 [Link].165 918 26423 I mtkpower_client: perf_lock_rel, hdl:25545,
tid:26423
05-19 [Link].165 479 1594 I libPowerHal: [PD] scn:3 hdl:25556
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].166 479 1594 I libPowerHal: [PD] scn:2 hdl:25555
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].168 479 1594 I libPowerHal: [PD] scn:1 hdl:25546
lock_user:[email protected] pid:918 tid:26427 dur:0
05-19 [Link].199 918 26519 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].199 918 26519 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].199 918 26519 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].199 918 26519 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].199 918 26519 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].513 918 26524 I mtkpower_client: perf_lock_rel, hdl:25558,
tid:26524
05-19 [Link].513 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].514 479 1594 I libPowerHal: [PD] scn:5 hdl:25558
lock_user:[email protected] pid:918 tid:26526 dur:0
05-19 [Link].515 918 26524 I mtkpower_client: ret_hdl:25559
05-19 [Link].517 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25559 hint:-1
pid:918 duration:0 => ret_hdl:25559
05-19 [Link].517 479 1594 I libPowerHal: [PE] scn:1 hdl:25559
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].648 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].650 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25560 hint:-1
pid:918 duration:0 => ret_hdl:25560
05-19 [Link].652 479 1594 I libPowerHal: [PE] scn:2 hdl:25560
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].653 918 26524 I mtkpower_client: ret_hdl:25560
05-19 [Link].896 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].897 918 26524 I mtkpower_client: ret_hdl:25564
05-19 [Link].897 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25564 hint:-1
pid:918 duration:0 => ret_hdl:25564
05-19 [Link].897 479 1594 I libPowerHal: [PE] scn:5 hdl:25564
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].252 918 26524 I mtkpower_client: perf_lock_rel, hdl:25564,
tid:26524
05-19 [Link].253 479 1594 I libPowerHal: [PD] scn:5 hdl:25564
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].393 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].394 918 26524 I mtkpower_client: ret_hdl:25567
05-19 [Link].397 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25567 hint:-1
pid:918 duration:0 => ret_hdl:25567
05-19 [Link].397 479 1594 I libPowerHal: [PE] scn:0 hdl:25567
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].490 918 26524 I mtkpower_client: perf_lock_rel, hdl:25567,
tid:26524
05-19 [Link].490 479 1594 I libPowerHal: [PD] scn:0 hdl:25567
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].663 918 9097 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].664 918 9097 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].666 918 9097 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].666 918 9097 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].670 918 9097 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].671 918 9097 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].671 918 9097 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].756 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].758 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25573 hint:-1
pid:918 duration:0 => ret_hdl:25573
05-19 [Link].758 479 1594 I libPowerHal: [PE] scn:3 hdl:25573
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].763 918 26524 I mtkpower_client: ret_hdl:25573
05-19 [Link].763 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].764 918 26524 I mtkpower_client: ret_hdl:25574
05-19 [Link].764 918 26524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26524
05-19 [Link].764 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25574 hint:-1
pid:918 duration:0 => ret_hdl:25574
05-19 [Link].764 479 1594 I libPowerHal: [PE] scn:4 hdl:25574
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].768 918 26524 I mtkpower_client: ret_hdl:25575
05-19 [Link].768 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25575 hint:-1
pid:918 duration:0 => ret_hdl:25575
05-19 [Link].768 479 1594 I libPowerHal: [PE] scn:5 hdl:25575
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].787 918 26586 E VDO_LOG : GetDecoderAPI hWrapper 0xea0a5810
05-19 [Link].787 918 26586 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].787 918 26586 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].789 918 26586 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].789 918 26586 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 12910
05-19 [Link].789 918 26586 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdd63e000
05-19 [Link].789 918 26586 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].796 918 26592 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26592
05-19 [Link].797 918 26592 I mtkpower_client: ret_hdl:25576
05-19 [Link].798 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25576 hint:-1
pid:918 duration:0 => ret_hdl:25576
05-19 [Link].798 479 1594 I libPowerHal: [PE] scn:6 hdl:25576
lock_user:[email protected] pid:918 tid:26592 dur:0
05-19 [Link].841 918 26586 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].841 918 26586 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].841 918 26586 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].841 918 26586 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].841 918 26586 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].950 918 26518 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].991 918 26518 I mtkpower_client: perf_lock_rel, hdl:25575,
tid:26518
05-19 [Link].992 918 26518 I mtkpower_client: perf_lock_rel, hdl:25574,
tid:26518
05-19 [Link].992 918 26518 I mtkpower_client: perf_lock_rel, hdl:25573,
tid:26518
05-19 [Link].992 918 26518 I mtkpower_client: perf_lock_rel, hdl:25560,
tid:26518
05-19 [Link].993 918 26518 I mtkpower_client: perf_lock_rel, hdl:25559,
tid:26518
05-19 [Link].993 918 26518 I mtkpower_client: perf_lock_rel, hdl:25558,
tid:26518
05-19 [Link].994 479 1594 I libPowerHal: [PD] scn:5 hdl:25575
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].997 479 1594 I libPowerHal: [PD] scn:4 hdl:25574
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].997 479 1594 I libPowerHal: [PD] scn:3 hdl:25573
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].999 479 1594 I libPowerHal: [PD] scn:2 hdl:25560
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].000 479 1594 I libPowerHal: [PD] scn:1 hdl:25559
lock_user:[email protected] pid:918 tid:26524 dur:0
05-19 [Link].308 918 26591 I mtkpower_client: perf_lock_rel, hdl:25576,
tid:26591
05-19 [Link].308 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].310 479 1594 I libPowerHal: [PD] scn:6 hdl:25576
lock_user:[email protected] pid:918 tid:26592 dur:0
05-19 [Link].311 918 26591 I mtkpower_client: ret_hdl:25577
05-19 [Link].311 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].319 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25577 hint:-1
pid:918 duration:0 => ret_hdl:25577
05-19 [Link].319 479 1594 I libPowerHal: [PE] scn:1 hdl:25577
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].320 918 26591 I mtkpower_client: ret_hdl:25578
05-19 [Link].320 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].321 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25578 hint:-1
pid:918 duration:0 => ret_hdl:25578
05-19 [Link].321 479 1594 I libPowerHal: [PE] scn:2 hdl:25578
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].322 918 26591 I mtkpower_client: ret_hdl:25579
05-19 [Link].322 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].330 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25579 hint:-1
pid:918 duration:0 => ret_hdl:25579
05-19 [Link].330 479 1594 I libPowerHal: [PE] scn:3 hdl:25579
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].331 918 26591 I mtkpower_client: ret_hdl:25580
05-19 [Link].331 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].332 918 26591 I mtkpower_client: ret_hdl:25581
05-19 [Link].336 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].341 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25580 hint:-1
pid:918 duration:0 => ret_hdl:25580
05-19 [Link].342 479 1594 I libPowerHal: [PE] scn:4 hdl:25580
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].342 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25581 hint:-1
pid:918 duration:0 => ret_hdl:25581
05-19 [Link].343 479 1594 I libPowerHal: [PE] scn:5 hdl:25581
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].343 918 26591 I mtkpower_client: ret_hdl:25582
05-19 [Link].344 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25582 hint:-1
pid:918 duration:0 => ret_hdl:25582
05-19 [Link].344 479 1594 I libPowerHal: [PE] scn:6 hdl:25582
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].468 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].470 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25583 hint:-1
pid:918 duration:0 => ret_hdl:25583
05-19 [Link].470 479 1594 I libPowerHal: [PE] scn:7 hdl:25583
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].473 918 26591 I mtkpower_client: ret_hdl:25583
05-19 [Link].473 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].476 918 26591 I mtkpower_client: ret_hdl:25585
05-19 [Link].477 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:25585 hint:-1
pid:918 duration:0 => ret_hdl:25585
05-19 [Link].477 479 1594 I libPowerHal: [PE] scn:9 hdl:25585
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].560 918 26591 I mtkpower_client: perf_lock_rel, hdl:25585,
tid:26591
05-19 [Link].561 918 26591 I mtkpower_client: perf_lock_rel, hdl:25583,
tid:26591
05-19 [Link].561 918 26591 I mtkpower_client: perf_lock_rel, hdl:25582,
tid:26591
05-19 [Link].561 479 1594 I libPowerHal: [PD] scn:9 hdl:25585
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].566 479 1594 I libPowerHal: [PD] scn:7 hdl:25583
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].568 479 1594 I libPowerHal: [PD] scn:6 hdl:25582
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].836 918 1784 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].837 918 9097 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].845 918 1784 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].845 918 1784 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].845 918 9097 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].846 918 11717 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].846 918 15680 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].917 918 26636 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].917 918 26636 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].917 918 26636 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].918 918 26636 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].918 918 26636 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40197
05-19 [Link].918 918 26636 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe225d000
05-19 [Link].918 918 26636 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].932 918 26644 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26644
05-19 [Link].934 918 26644 I mtkpower_client: ret_hdl:25590
05-19 [Link].936 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25590 hint:-1
pid:918 duration:0 => ret_hdl:25590
05-19 [Link].936 479 1594 I libPowerHal: [PE] scn:6 hdl:25590
lock_user:[email protected] pid:918 tid:26644 dur:0
05-19 [Link].956 918 26636 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].956 918 26636 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].956 918 26636 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].956 918 26636 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].956 918 26636 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].048 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].049 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25591 hint:-1
pid:918 duration:0 => ret_hdl:25591
05-19 [Link].049 479 1594 I libPowerHal: [PE] scn:7 hdl:25591
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].050 918 26591 I mtkpower_client: ret_hdl:25591
05-19 [Link].050 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].051 918 26591 I mtkpower_client: ret_hdl:25592
05-19 [Link].052 918 26591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26591
05-19 [Link].052 918 26591 I mtkpower_client: ret_hdl:25593
05-19 [Link].054 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:25592 hint:-1
pid:918 duration:0 => ret_hdl:25592
05-19 [Link].054 479 1594 I libPowerHal: [PE] scn:8 hdl:25592
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].056 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:25593 hint:-1
pid:918 duration:0 => ret_hdl:25593
05-19 [Link].057 479 1594 I libPowerHal: [PE] scn:9 hdl:25593
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].202 918 26585 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].219 918 26585 I mtkpower_client: perf_lock_rel, hdl:25593,
tid:26585
05-19 [Link].219 918 26585 I mtkpower_client: perf_lock_rel, hdl:25592,
tid:26585
05-19 [Link].219 918 26585 I mtkpower_client: perf_lock_rel, hdl:25591,
tid:26585
05-19 [Link].219 918 26585 I mtkpower_client: perf_lock_rel, hdl:25581,
tid:26585
05-19 [Link].219 918 26585 I mtkpower_client: perf_lock_rel, hdl:25580,
tid:26585
05-19 [Link].220 918 26585 I mtkpower_client: perf_lock_rel, hdl:25579,
tid:26585
05-19 [Link].220 918 26585 I mtkpower_client: perf_lock_rel, hdl:25578,
tid:26585
05-19 [Link].220 918 26585 I mtkpower_client: perf_lock_rel, hdl:25577,
tid:26585
05-19 [Link].220 918 26585 I mtkpower_client: perf_lock_rel, hdl:25576,
tid:26585
05-19 [Link].222 479 1594 I libPowerHal: [PD] scn:9 hdl:25593
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].223 479 1594 I libPowerHal: [PD] scn:8 hdl:25592
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].224 479 1594 I libPowerHal: [PD] scn:7 hdl:25591
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].226 479 1594 I libPowerHal: [PD] scn:5 hdl:25581
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].227 479 1594 I libPowerHal: [PD] scn:4 hdl:25580
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].228 479 1594 I libPowerHal: [PD] scn:3 hdl:25579
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].230 479 1594 I libPowerHal: [PD] scn:2 hdl:25578
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].232 479 1594 I libPowerHal: [PD] scn:1 hdl:25577
lock_user:[email protected] pid:918 tid:26591 dur:0
05-19 [Link].472 918 26643 I mtkpower_client: perf_lock_rel, hdl:25590,
tid:26643
05-19 [Link].472 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].473 479 1594 I libPowerHal: [PD] scn:6 hdl:25590
lock_user:[email protected] pid:918 tid:26644 dur:0
05-19 [Link].474 918 26643 I mtkpower_client: ret_hdl:25594
05-19 [Link].474 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].474 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25594 hint:-1
pid:918 duration:0 => ret_hdl:25594
05-19 [Link].474 479 1594 I libPowerHal: [PE] scn:1 hdl:25594
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].476 918 26643 I mtkpower_client: ret_hdl:25595
05-19 [Link].476 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].477 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25595 hint:-1
pid:918 duration:0 => ret_hdl:25595
05-19 [Link].477 479 1594 I libPowerHal: [PE] scn:2 hdl:25595
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].478 918 26643 I mtkpower_client: ret_hdl:25596
05-19 [Link].479 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25596 hint:-1
pid:918 duration:0 => ret_hdl:25596
05-19 [Link].479 479 1594 I libPowerHal: [PE] scn:3 hdl:25596
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].680 918 26643 I mtkpower_client: perf_lock_rel, hdl:25596,
tid:26643
05-19 [Link].682 479 1594 I libPowerHal: [PD] scn:3 hdl:25596
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].050 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].051 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25602 hint:-1
pid:918 duration:0 => ret_hdl:25602
05-19 [Link].051 479 1594 I libPowerHal: [PE] scn:3 hdl:25602
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].052 918 11677 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].052 918 11677 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].052 918 26643 I mtkpower_client: ret_hdl:25602
05-19 [Link].052 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].053 918 26643 I mtkpower_client: ret_hdl:25603
05-19 [Link].053 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].053 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25603 hint:-1
pid:918 duration:0 => ret_hdl:25603
05-19 [Link].053 479 1594 I libPowerHal: [PE] scn:5 hdl:25603
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].056 918 11716 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].056 918 11716 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].057 918 11716 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].057 918 11716 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].058 918 11716 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].061 918 26643 I mtkpower_client: ret_hdl:25604
05-19 [Link].061 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].063 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25604 hint:-1
pid:918 duration:0 => ret_hdl:25604
05-19 [Link].063 479 1594 I libPowerHal: [PE] scn:6 hdl:25604
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].064 918 26643 I mtkpower_client: ret_hdl:25605
05-19 [Link].064 918 26643 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26643
05-19 [Link].065 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25605 hint:-1
pid:918 duration:0 => ret_hdl:25605
05-19 [Link].065 479 1594 I libPowerHal: [PE] scn:7 hdl:25605
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].065 918 26643 I mtkpower_client: ret_hdl:25606
05-19 [Link].066 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:25606 hint:-1
pid:918 duration:0 => ret_hdl:25606
05-19 [Link].066 479 1594 I libPowerHal: [PE] scn:8 hdl:25606
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].267 918 26690 E VDO_LOG : GetDecoderAPI hWrapper 0xea041810
05-19 [Link].267 918 26690 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].267 918 26690 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].268 918 26690 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].268 918 26690 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 111
05-19 [Link].268 918 26690 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xddf76000
05-19 [Link].268 918 26690 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].276 918 26708 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26708
05-19 [Link].279 918 26708 I mtkpower_client: ret_hdl:25607
05-19 [Link].279 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25607 hint:-1
pid:918 duration:0 => ret_hdl:25607
05-19 [Link].279 479 1594 I libPowerHal: [PE] scn:4 hdl:25607
lock_user:[email protected] pid:918 tid:26708 dur:0
05-19 [Link].291 918 26690 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].291 918 26690 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].291 918 26690 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].291 918 26690 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].291 918 26690 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].334 918 26635 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].355 918 26635 I mtkpower_client: perf_lock_rel, hdl:25606,
tid:26635
05-19 [Link].356 479 1594 I libPowerHal: [PD] scn:8 hdl:25606
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].358 918 26635 I mtkpower_client: perf_lock_rel, hdl:25605,
tid:26635
05-19 [Link].358 479 1594 I libPowerHal: [PD] scn:7 hdl:25605
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].359 918 26635 I mtkpower_client: perf_lock_rel, hdl:25604,
tid:26635
05-19 [Link].360 479 1594 I libPowerHal: [PD] scn:6 hdl:25604
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].362 918 26635 I mtkpower_client: perf_lock_rel, hdl:25603,
tid:26635
05-19 [Link].368 479 1594 I libPowerHal: [PD] scn:5 hdl:25603
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].369 918 26635 I mtkpower_client: perf_lock_rel, hdl:25602,
tid:26635
05-19 [Link].370 479 1594 I libPowerHal: [PD] scn:3 hdl:25602
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].372 918 26635 I mtkpower_client: perf_lock_rel, hdl:25595,
tid:26635
05-19 [Link].372 918 26635 I mtkpower_client: perf_lock_rel, hdl:25594,
tid:26635
05-19 [Link].373 479 1594 I libPowerHal: [PD] scn:2 hdl:25595
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].375 918 26635 I mtkpower_client: perf_lock_rel, hdl:25590,
tid:26635
05-19 [Link].378 479 1594 I libPowerHal: [PD] scn:1 hdl:25594
lock_user:[email protected] pid:918 tid:26643 dur:0
05-19 [Link].701 918 26707 I mtkpower_client: perf_lock_rel, hdl:25607,
tid:26707
05-19 [Link].702 918 26707 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26707
05-19 [Link].703 479 1594 I libPowerHal: [PD] scn:4 hdl:25607
lock_user:[email protected] pid:918 tid:26708 dur:0
05-19 [Link].704 918 26707 I mtkpower_client: ret_hdl:25609
05-19 [Link].704 918 26707 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26707
05-19 [Link].705 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25609 hint:-1
pid:918 duration:0 => ret_hdl:25609
05-19 [Link].705 479 1594 I libPowerHal: [PE] scn:1 hdl:25609
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].706 918 26707 I mtkpower_client: ret_hdl:25610
05-19 [Link].706 918 26707 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26707
05-19 [Link].706 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25610 hint:-1
pid:918 duration:0 => ret_hdl:25610
05-19 [Link].706 479 1594 I libPowerHal: [PE] scn:2 hdl:25610
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].707 918 26707 I mtkpower_client: ret_hdl:25611
05-19 [Link].707 918 26707 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26707
05-19 [Link].707 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25611 hint:-1
pid:918 duration:0 => ret_hdl:25611
05-19 [Link].707 479 1594 I libPowerHal: [PE] scn:3 hdl:25611
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].708 918 26707 I mtkpower_client: ret_hdl:25612
05-19 [Link].709 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25612 hint:-1
pid:918 duration:0 => ret_hdl:25612
05-19 [Link].710 479 1594 I libPowerHal: [PE] scn:4 hdl:25612
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].025 918 26707 I mtkpower_client: perf_lock_rel, hdl:25612,
tid:26707
05-19 [Link].026 479 1594 I libPowerHal: [PD] scn:4 hdl:25612
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].058 918 26707 I mtkpower_client: perf_lock_rel, hdl:25611,
tid:26707
05-19 [Link].058 918 26707 I mtkpower_client: perf_lock_rel, hdl:25610,
tid:26707
05-19 [Link].058 479 1594 I libPowerHal: [PD] scn:3 hdl:25611
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].059 479 1594 I libPowerHal: [PD] scn:2 hdl:25610
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].241 918 26707 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26707
05-19 [Link].242 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25615 hint:-1
pid:918 duration:0 => ret_hdl:25615
05-19 [Link].242 479 1594 I libPowerHal: [PE] scn:2 hdl:25615
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].243 918 26707 I mtkpower_client: ret_hdl:25615
05-19 [Link].373 918 26707 I mtkpower_client: perf_lock_rel, hdl:25615,
tid:26707
05-19 [Link].374 479 1594 I libPowerHal: [PD] scn:2 hdl:25615
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].938 918 26689 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].949 918 26689 I mtkpower_client: perf_lock_rel, hdl:25612,
tid:26689
05-19 [Link].949 918 26689 I mtkpower_client: perf_lock_rel, hdl:25611,
tid:26689
05-19 [Link].950 918 26689 I mtkpower_client: perf_lock_rel, hdl:25615,
tid:26689
05-19 [Link].950 918 26689 I mtkpower_client: perf_lock_rel, hdl:25609,
tid:26689
05-19 [Link].950 918 26689 I mtkpower_client: perf_lock_rel, hdl:25607,
tid:26689
05-19 [Link].951 918 26689 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].953 918 26689 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].953 918 26689 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].953 918 26689 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].955 479 1594 I libPowerHal: [PD] scn:1 hdl:25609
lock_user:[email protected] pid:918 tid:26707 dur:0
05-19 [Link].032 918 1780 E OMXNodeInstance:
setParameter(0xea48d804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].033 918 1780 E OMXNodeInstance:
getParameter(0xea48d804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].035 918 1780 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].035 918 1780 E OMXNodeInstance:
setConfig(0xea48d804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].036 918 1780 E OMXNodeInstance:
getConfig(0xea48d804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].037 918 1959 E OMXNodeInstance:
getConfig(0xea48d804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].076 918 26780 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].076 918 26780 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].076 918 26780 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].076 918 26780 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].076 918 26780 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].104 918 26780 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].576 918 15680 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].576 918 15680 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].579 918 15680 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].579 918 15680 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].579 918 15680 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].580 918 15680 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].580 918 15680 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].712 918 26804 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d1810
05-19 [Link].713 918 26804 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].713 918 26804 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].839 918 26804 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].839 918 26804 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 6311
05-19 [Link].839 918 26804 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe058b000
05-19 [Link].839 918 26804 E VDO_LOG : vp9_dec_init() u4Width 384, u4Height
704, Offset 0, Padding 0
05-19 [Link].852 918 26823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26823
05-19 [Link].853 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25623 hint:-1
pid:918 duration:0 => ret_hdl:25623
05-19 [Link].853 479 1594 I libPowerHal: [PE] scn:0 hdl:25623
lock_user:[email protected] pid:918 tid:26823 dur:0
05-19 [Link].854 918 26823 I mtkpower_client: ret_hdl:25623
05-19 [Link].858 918 26804 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].858 918 26804 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].858 918 26804 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].858 918 26804 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].858 918 26804 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].023 918 26822 I mtkpower_client: perf_lock_rel, hdl:25623,
tid:26822
05-19 [Link].023 918 26822 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26822
05-19 [Link].024 479 1594 I libPowerHal: [PD] scn:0 hdl:25623
lock_user:[email protected] pid:918 tid:26823 dur:0
05-19 [Link].025 918 26822 I mtkpower_client: ret_hdl:25624
05-19 [Link].025 918 26822 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26822
05-19 [Link].026 918 26822 I mtkpower_client: ret_hdl:25625
05-19 [Link].026 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25624 hint:-1
pid:918 duration:0 => ret_hdl:25624
05-19 [Link].026 479 1594 I libPowerHal: [PE] scn:2 hdl:25624
lock_user:[email protected] pid:918 tid:26822 dur:0
05-19 [Link].028 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25625 hint:-1
pid:918 duration:0 => ret_hdl:25625
05-19 [Link].028 479 1594 I libPowerHal: [PE] scn:0 hdl:25625
lock_user:[email protected] pid:918 tid:26822 dur:0
05-19 [Link].198 918 26822 I mtkpower_client: perf_lock_rel, hdl:25625,
tid:26822
05-19 [Link].200 479 1594 I libPowerHal: [PD] scn:0 hdl:25625
lock_user:[email protected] pid:918 tid:26822 dur:0
05-19 [Link].774 918 11677 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].775 918 11677 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].780 918 11677 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].780 918 11677 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 11677 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 11677 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 11677 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].857 918 26868 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].857 918 26868 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].857 918 26868 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].859 918 26868 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].859 918 26868 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 10109
05-19 [Link].860 918 26868 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1b77000
05-19 [Link].860 918 26868 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].868 918 26875 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26875
05-19 [Link].869 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25629 hint:-1
pid:918 duration:0 => ret_hdl:25629
05-19 [Link].869 479 1594 I libPowerHal: [PE] scn:1 hdl:25629
lock_user:[email protected] pid:918 tid:26875 dur:0
05-19 [Link].869 918 26875 I mtkpower_client: ret_hdl:25629
05-19 [Link].899 918 26868 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].899 918 26868 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].899 918 26868 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].899 918 26868 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].899 918 26868 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].359 918 26803 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].390 918 26803 I mtkpower_client: perf_lock_rel, hdl:25625,
tid:26803
05-19 [Link].390 918 26803 I mtkpower_client: perf_lock_rel, hdl:25624,
tid:26803
05-19 [Link].390 918 26803 I mtkpower_client: perf_lock_rel, hdl:25623,
tid:26803
05-19 [Link].392 479 1594 I libPowerHal: [PD] scn:2 hdl:25624
lock_user:[email protected] pid:918 tid:26822 dur:0
05-19 [Link].459 918 26874 I mtkpower_client: perf_lock_rel, hdl:25629,
tid:26874
05-19 [Link].460 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].461 479 1594 I libPowerHal: [PD] scn:1 hdl:25629
lock_user:[email protected] pid:918 tid:26875 dur:0
05-19 [Link].463 918 26874 I mtkpower_client: ret_hdl:25632
05-19 [Link].465 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25632 hint:-1
pid:918 duration:0 => ret_hdl:25632
05-19 [Link].465 479 1594 I libPowerHal: [PE] scn:0 hdl:25632
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].596 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].599 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25633 hint:-1
pid:918 duration:0 => ret_hdl:25633
05-19 [Link].599 479 1594 I libPowerHal: [PE] scn:1 hdl:25633
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].600 918 26874 I mtkpower_client: ret_hdl:25633
05-19 [Link].925 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].927 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25634 hint:-1
pid:918 duration:0 => ret_hdl:25634
05-19 [Link].927 479 1594 I libPowerHal: [PE] scn:2 hdl:25634
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].928 918 26874 I mtkpower_client: ret_hdl:25634
05-19 [Link].197 918 26874 I mtkpower_client: perf_lock_rel, hdl:25634,
tid:26874
05-19 [Link].198 479 1594 I libPowerHal: [PD] scn:2 hdl:25634
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].680 918 13399 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].681 918 13399 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].686 918 11717 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].686 918 11717 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].687 918 1721 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].687 918 1780 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].688 918 11689 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].760 918 26914 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].760 918 26914 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].760 918 26914 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].761 918 26914 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].761 918 26914 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 9568
05-19 [Link].761 918 26914 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].761 918 26914 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].790 918 26918 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26918
05-19 [Link].791 918 26918 I mtkpower_client: ret_hdl:25638
05-19 [Link].791 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25638 hint:-1
pid:918 duration:0 => ret_hdl:25638
05-19 [Link].791 479 1594 I libPowerHal: [PE] scn:3 hdl:25638
lock_user:[email protected] pid:918 tid:26918 dur:0
05-19 [Link].844 918 26914 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].844 918 26914 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].844 918 26914 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].844 918 26914 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].844 918 26914 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].149 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].150 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25641 hint:-1
pid:918 duration:0 => ret_hdl:25641
05-19 [Link].150 479 1594 I libPowerHal: [PE] scn:4 hdl:25641
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].152 918 26874 I mtkpower_client: ret_hdl:25641
05-19 [Link].152 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].153 918 26874 I mtkpower_client: ret_hdl:25642
05-19 [Link].153 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].153 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25642 hint:-1
pid:918 duration:0 => ret_hdl:25642
05-19 [Link].153 479 1594 I libPowerHal: [PE] scn:5 hdl:25642
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].157 918 26874 I mtkpower_client: ret_hdl:25643
05-19 [Link].157 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].158 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25643 hint:-1
pid:918 duration:0 => ret_hdl:25643
05-19 [Link].158 479 1594 I libPowerHal: [PE] scn:6 hdl:25643
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].160 918 26874 I mtkpower_client: ret_hdl:25644
05-19 [Link].160 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].160 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25644 hint:-1
pid:918 duration:0 => ret_hdl:25644
05-19 [Link].161 479 1594 I libPowerHal: [PE] scn:7 hdl:25644
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].163 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:25645 hint:-1
pid:918 duration:0 => ret_hdl:25645
05-19 [Link].163 479 1594 I libPowerHal: [PE] scn:8 hdl:25645
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].164 918 26874 I mtkpower_client: ret_hdl:25645
05-19 [Link].164 918 26874 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26874
05-19 [Link].165 918 26874 I mtkpower_client: ret_hdl:25646
05-19 [Link].166 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:25646 hint:-1
pid:918 duration:0 => ret_hdl:25646
05-19 [Link].166 479 1594 I libPowerHal: [PE] scn:9 hdl:25646
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].216 918 26867 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].233 918 26917 I mtkpower_client: perf_lock_rel, hdl:25638,
tid:26917
05-19 [Link].233 918 26917 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26917
05-19 [Link].234 918 26867 I mtkpower_client: perf_lock_rel, hdl:25646,
tid:26867
05-19 [Link].234 479 1594 I libPowerHal: [PD] scn:3 hdl:25638
lock_user:[email protected] pid:918 tid:26918 dur:0
05-19 [Link].235 918 26917 I mtkpower_client: ret_hdl:25647
05-19 [Link].235 918 26917 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26917
05-19 [Link].235 479 1594 I libPowerHal: [perfLockAcq] idx:10 hdl:25647 hint:-
1 pid:918 duration:0 => ret_hdl:25647
05-19 [Link].235 479 1594 I libPowerHal: [PE] scn:10 hdl:25647
lock_user:[email protected] pid:918 tid:26917 dur:0
05-19 [Link].237 918 26917 I mtkpower_client: ret_hdl:25648
05-19 [Link].237 918 26917 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26917
05-19 [Link].238 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25648 hint:-1
pid:918 duration:0 => ret_hdl:25648
05-19 [Link].238 479 1594 I libPowerHal: [PE] scn:3 hdl:25648
lock_user:[email protected] pid:918 tid:26917 dur:0
05-19 [Link].239 918 26917 I mtkpower_client: ret_hdl:25649
05-19 [Link].239 479 1594 I libPowerHal: [perfLockAcq] idx:11 hdl:25649 hint:-
1 pid:918 duration:0 => ret_hdl:25649
05-19 [Link].239 479 1594 I libPowerHal: [PE] scn:11 hdl:25649
lock_user:[email protected] pid:918 tid:26917 dur:0
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25645,
tid:26867
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25644,
tid:26867
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25643,
tid:26867
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25642,
tid:26867
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25641,
tid:26867
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25633,
tid:26867
05-19 [Link].239 918 26867 I mtkpower_client: perf_lock_rel, hdl:25632,
tid:26867
05-19 [Link].240 918 26867 I mtkpower_client: perf_lock_rel, hdl:25629,
tid:26867
05-19 [Link].241 479 1594 I libPowerHal: [PD] scn:9 hdl:25646
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].243 479 1594 I libPowerHal: [PD] scn:8 hdl:25645
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].246 479 1594 I libPowerHal: [PD] scn:7 hdl:25644
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].249 479 1594 I libPowerHal: [PD] scn:6 hdl:25643
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].251 479 1594 I libPowerHal: [PD] scn:5 hdl:25642
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].253 479 1594 I libPowerHal: [PD] scn:4 hdl:25641
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].254 479 1594 I libPowerHal: [PD] scn:1 hdl:25633
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].256 479 1594 I libPowerHal: [PD] scn:0 hdl:25632
lock_user:[email protected] pid:918 tid:26874 dur:0
05-19 [Link].416 918 26917 I mtkpower_client: perf_lock_rel, hdl:25649,
tid:26917
05-19 [Link].417 479 1594 I libPowerHal: [PD] scn:11 hdl:25649
lock_user:[email protected] pid:918 tid:26917 dur:0
05-19 [Link].639 918 26917 I mtkpower_client: perf_lock_rel, hdl:25648,
tid:26917
05-19 [Link].640 479 1594 I libPowerHal: [PD] scn:3 hdl:25648
lock_user:[email protected] pid:918 tid:26917 dur:0
05-19 [Link].872 918 5033 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].873 918 5033 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].876 918 11689 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].876 918 11689 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].877 918 5033 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].877 918 11689 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].878 918 11689 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].967 918 26961 E VDO_LOG : GetDecoderAPI hWrapper 0xea167810
05-19 [Link].967 918 26961 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].967 918 26961 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].968 918 26961 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].968 918 26961 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43746
05-19 [Link].968 918 26961 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1cf4000
05-19 [Link].969 918 26961 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].988 918 26971 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26971
05-19 [Link].989 918 26971 I mtkpower_client: ret_hdl:25655
05-19 [Link].989 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25655 hint:-1
pid:918 duration:0 => ret_hdl:25655
05-19 [Link].989 479 1594 I libPowerHal: [PE] scn:2 hdl:25655
lock_user:[email protected] pid:918 tid:26971 dur:0
05-19 [Link].010 918 26961 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].010 918 26961 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].010 918 26961 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].010 918 26961 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].010 918 26961 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].267 918 26913 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].297 918 26913 I mtkpower_client: perf_lock_rel, hdl:25649,
tid:26913
05-19 [Link].297 918 26913 I mtkpower_client: perf_lock_rel, hdl:25648,
tid:26913
05-19 [Link].298 918 26913 I mtkpower_client: perf_lock_rel, hdl:25647,
tid:26913
05-19 [Link].300 918 26913 I mtkpower_client: perf_lock_rel, hdl:25638,
tid:26913
05-19 [Link].300 479 1594 I libPowerHal: [PD] scn:10 hdl:25647
lock_user:[email protected] pid:918 tid:26917 dur:0
05-19 [Link].443 918 26970 I mtkpower_client: perf_lock_rel, hdl:25655,
tid:26970
05-19 [Link].444 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].445 479 1594 I libPowerHal: [PD] scn:2 hdl:25655
lock_user:[email protected] pid:918 tid:26971 dur:0
05-19 [Link].445 918 26970 I mtkpower_client: ret_hdl:25656
05-19 [Link].446 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].446 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25656 hint:-1
pid:918 duration:0 => ret_hdl:25656
05-19 [Link].446 479 1594 I libPowerHal: [PE] scn:1 hdl:25656
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].447 918 26970 I mtkpower_client: ret_hdl:25657
05-19 [Link].447 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].447 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25657 hint:-1
pid:918 duration:0 => ret_hdl:25657
05-19 [Link].447 479 1594 I libPowerHal: [PE] scn:2 hdl:25657
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].449 918 26970 I mtkpower_client: ret_hdl:25658
05-19 [Link].449 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].449 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25658 hint:-1
pid:918 duration:0 => ret_hdl:25658
05-19 [Link].449 479 1594 I libPowerHal: [PE] scn:3 hdl:25658
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].450 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25659 hint:-1
pid:918 duration:0 => ret_hdl:25659
05-19 [Link].450 479 1594 I libPowerHal: [PE] scn:4 hdl:25659
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].450 918 26970 I mtkpower_client: ret_hdl:25659
05-19 [Link].450 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].451 918 26970 I mtkpower_client: ret_hdl:25660
05-19 [Link].451 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].451 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25660 hint:-1
pid:918 duration:0 => ret_hdl:25660
05-19 [Link].451 479 1594 I libPowerHal: [PE] scn:5 hdl:25660
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].452 918 26970 I mtkpower_client: ret_hdl:25661
05-19 [Link].452 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25661 hint:-1
pid:918 duration:0 => ret_hdl:25661
05-19 [Link].452 479 1594 I libPowerHal: [PE] scn:6 hdl:25661
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].524 918 26970 I mtkpower_client: perf_lock_rel, hdl:25661,
tid:26970
05-19 [Link].524 918 26970 I mtkpower_client: perf_lock_rel, hdl:25660,
tid:26970
05-19 [Link].524 479 1594 I libPowerHal: [PD] scn:6 hdl:25661
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].526 479 1594 I libPowerHal: [PD] scn:5 hdl:25660
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].821 918 1784 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].822 918 1784 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].822 918 26970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:26970
05-19 [Link].822 918 26970 I mtkpower_client: ret_hdl:25667
05-19 [Link].823 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25667 hint:-1
pid:918 duration:0 => ret_hdl:25667
05-19 [Link].823 479 1594 I libPowerHal: [PE] scn:0 hdl:25667
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].825 918 5033 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].825 918 5033 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 5033 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 5033 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 5033 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].909 918 27010 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].909 918 27010 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].909 918 27010 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].910 918 27010 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].910 918 27010 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 9568
05-19 [Link].911 918 27010 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe14f4000
05-19 [Link].911 918 27010 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].923 918 27016 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27016
05-19 [Link].926 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25668 hint:-1
pid:918 duration:0 => ret_hdl:25668
05-19 [Link].926 479 1594 I libPowerHal: [PE] scn:5 hdl:25668
lock_user:[email protected] pid:918 tid:27016 dur:0
05-19 [Link].928 918 27016 I mtkpower_client: ret_hdl:25668
05-19 [Link].978 918 27010 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].978 918 27010 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].978 918 27010 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].978 918 27010 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].979 918 27010 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].987 918 26959 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].000 918 26959 I mtkpower_client: perf_lock_rel, hdl:25661,
tid:26959
05-19 [Link].001 918 26959 I mtkpower_client: perf_lock_rel, hdl:25667,
tid:26959
05-19 [Link].001 918 26959 I mtkpower_client: perf_lock_rel, hdl:25659,
tid:26959
05-19 [Link].002 918 26959 I mtkpower_client: perf_lock_rel, hdl:25658,
tid:26959
05-19 [Link].002 918 26959 I mtkpower_client: perf_lock_rel, hdl:25657,
tid:26959
05-19 [Link].002 918 26959 I mtkpower_client: perf_lock_rel, hdl:25656,
tid:26959
05-19 [Link].002 918 26959 I mtkpower_client: perf_lock_rel, hdl:25655,
tid:26959
05-19 [Link].002 479 1594 I libPowerHal: [PD] scn:0 hdl:25667
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].004 479 1594 I libPowerHal: [PD] scn:4 hdl:25659
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].005 479 1594 I libPowerHal: [PD] scn:3 hdl:25658
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].006 479 1594 I libPowerHal: [PD] scn:2 hdl:25657
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].007 479 1594 I libPowerHal: [PD] scn:1 hdl:25656
lock_user:[email protected] pid:918 tid:26970 dur:0
05-19 [Link].137 918 27015 I mtkpower_client: perf_lock_rel, hdl:25668,
tid:27015
05-19 [Link].137 918 27015 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27015
05-19 [Link].138 479 1594 I libPowerHal: [PD] scn:5 hdl:25668
lock_user:[email protected] pid:918 tid:27016 dur:0
05-19 [Link].139 918 27015 I mtkpower_client: ret_hdl:25669
05-19 [Link].139 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25669 hint:-1
pid:918 duration:0 => ret_hdl:25669
05-19 [Link].139 479 1594 I libPowerHal: [PE] scn:0 hdl:25669
lock_user:[email protected] pid:918 tid:27015 dur:0
05-19 [Link].697 918 27010 E MtkOmxVdecEx: [0xe9e3e000] ret 0, wait fence 23
took 10755 us
05-19 [Link].735 918 27010 E MtkOmxVdecEx: [0xe9e3e000] ret 0, wait fence 28
took 17347 us
05-19 [Link].139 917 917 E wificond: vivo add tx_good 80018 tx_bad 59 rx_good
119180 tx_retry 14904
05-19 [Link].767 918 11689 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].767 918 11689 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].769 918 11689 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].769 918 11689 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].769 918 11689 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].770 918 11689 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].770 918 11689 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].905 918 27098 E VDO_LOG : GetDecoderAPI hWrapper 0xea167810
05-19 [Link].905 918 27098 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].905 918 27098 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].906 918 27098 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].906 918 27098 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43746
05-19 [Link].906 918 27098 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1e8a000
05-19 [Link].906 918 27098 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].908 918 27015 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27015
05-19 [Link].909 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25674 hint:-1
pid:918 duration:0 => ret_hdl:25674
05-19 [Link].910 479 1594 I libPowerHal: [PE] scn:1 hdl:25674
lock_user:[email protected] pid:918 tid:27015 dur:0
05-19 [Link].910 918 27015 I mtkpower_client: ret_hdl:25674
05-19 [Link].923 918 27106 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27106
05-19 [Link].925 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25675 hint:-1
pid:918 duration:0 => ret_hdl:25675
05-19 [Link].925 479 1594 I libPowerHal: [PE] scn:2 hdl:25675
lock_user:[email protected] pid:918 tid:27106 dur:0
05-19 [Link].925 918 27106 I mtkpower_client: ret_hdl:25675
05-19 [Link].969 918 27098 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].969 918 27098 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].969 918 27098 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].969 918 27098 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].970 918 27098 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].057 918 27009 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].081 918 27009 I mtkpower_client: perf_lock_rel, hdl:25674,
tid:27009
05-19 [Link].081 918 27009 I mtkpower_client: perf_lock_rel, hdl:25669,
tid:27009
05-19 [Link].082 918 27009 I mtkpower_client: perf_lock_rel, hdl:25668,
tid:27009
05-19 [Link].083 479 1594 I libPowerHal: [PD] scn:1 hdl:25674
lock_user:[email protected] pid:918 tid:27015 dur:0
05-19 [Link].085 479 1594 I libPowerHal: [PD] scn:0 hdl:25669
lock_user:[email protected] pid:918 tid:27015 dur:0
05-19 [Link].398 918 27105 I mtkpower_client: perf_lock_rel, hdl:25675,
tid:27105
05-19 [Link].398 918 27105 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27105
05-19 [Link].403 479 1594 I libPowerHal: [PD] scn:2 hdl:25675
lock_user:[email protected] pid:918 tid:27106 dur:0
05-19 [Link].407 918 27105 I mtkpower_client: ret_hdl:25679
05-19 [Link].407 918 27105 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27105
05-19 [Link].408 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25679 hint:-1
pid:918 duration:0 => ret_hdl:25679
05-19 [Link].409 479 1594 I libPowerHal: [PE] scn:2 hdl:25679
lock_user:[email protected] pid:918 tid:27105 dur:0
05-19 [Link].409 918 27105 I mtkpower_client: ret_hdl:25680
05-19 [Link].409 918 27105 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27105
05-19 [Link].410 918 27105 I mtkpower_client: ret_hdl:25681
05-19 [Link].411 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25680 hint:-1
pid:918 duration:0 => ret_hdl:25680
05-19 [Link].411 479 1594 I libPowerHal: [PE] scn:4 hdl:25680
lock_user:[email protected] pid:918 tid:27105 dur:0
05-19 [Link].412 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25681 hint:-1
pid:918 duration:0 => ret_hdl:25681
05-19 [Link].413 479 1594 I libPowerHal: [PE] scn:5 hdl:25681
lock_user:[email protected] pid:918 tid:27105 dur:0
05-19 [Link].522 918 15680 E OMXNodeInstance:
setParameter(0xea486004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].523 918 15680 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].528 918 15680 E MtkOmxVdecEx: [0xea486000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].528 918 15680 E OMXNodeInstance:
setConfig(0xea486004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].529 918 15680 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].529 918 15680 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].530 918 15680 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].576 918 27148 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].576 918 27148 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].576 918 27148 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].577 918 27148 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].577 918 27148 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 9568
05-19 [Link].577 918 27148 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe188a000
05-19 [Link].577 918 27148 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].581 918 27153 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27153
05-19 [Link].582 918 27153 I mtkpower_client: ret_hdl:25684
05-19 [Link].582 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25684 hint:-1
pid:918 duration:0 => ret_hdl:25684
05-19 [Link].582 479 1594 I libPowerHal: [PE] scn:1 hdl:25684
lock_user:[email protected] pid:918 tid:27153 dur:0
05-19 [Link].587 918 27148 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].588 918 27148 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].588 918 27148 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].588 918 27148 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].588 918 27148 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].718 918 27097 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].750 918 27097 I mtkpower_client: perf_lock_rel, hdl:25681,
tid:27097
05-19 [Link].750 918 27097 I mtkpower_client: perf_lock_rel, hdl:25680,
tid:27097
05-19 [Link].751 479 1594 I libPowerHal: [PD] scn:5 hdl:25681
lock_user:[email protected] pid:918 tid:27105 dur:0
05-19 [Link].751 918 27097 I mtkpower_client: perf_lock_rel, hdl:25679,
tid:27097
05-19 [Link].752 918 27097 I mtkpower_client: perf_lock_rel, hdl:25675,
tid:27097
05-19 [Link].754 479 1594 I libPowerHal: [PD] scn:4 hdl:25680
lock_user:[email protected] pid:918 tid:27105 dur:0
05-19 [Link].755 479 1594 I libPowerHal: [PD] scn:2 hdl:25679
lock_user:[email protected] pid:918 tid:27105 dur:0
05-19 [Link].884 918 27152 I mtkpower_client: perf_lock_rel, hdl:25684,
tid:27152
05-19 [Link].884 918 27152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27152
05-19 [Link].885 479 1594 I libPowerHal: [PD] scn:1 hdl:25684
lock_user:[email protected] pid:918 tid:27153 dur:0
05-19 [Link].885 918 27152 I mtkpower_client: ret_hdl:25685
05-19 [Link].885 918 27152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27152
05-19 [Link].886 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25685 hint:-1
pid:918 duration:0 => ret_hdl:25685
05-19 [Link].886 479 1594 I libPowerHal: [PE] scn:0 hdl:25685
lock_user:[email protected] pid:918 tid:27152 dur:0
05-19 [Link].887 918 27152 I mtkpower_client: ret_hdl:25686
05-19 [Link].887 918 27152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27152
05-19 [Link].888 918 27152 I mtkpower_client: ret_hdl:25687
05-19 [Link].890 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25686 hint:-1
pid:918 duration:0 => ret_hdl:25686
05-19 [Link].890 479 1594 I libPowerHal: [PE] scn:1 hdl:25686
lock_user:[email protected] pid:918 tid:27152 dur:0
05-19 [Link].891 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25687 hint:-1
pid:918 duration:0 => ret_hdl:25687
05-19 [Link].891 479 1594 I libPowerHal: [PE] scn:2 hdl:25687
lock_user:[email protected] pid:918 tid:27152 dur:0
05-19 [Link].936 918 27152 I mtkpower_client: perf_lock_rel, hdl:25687,
tid:27152
05-19 [Link].937 479 1594 I libPowerHal: [PD] scn:2 hdl:25687
lock_user:[email protected] pid:918 tid:27152 dur:0
05-19 [Link].012 918 27152 I mtkpower_client: perf_lock_rel, hdl:25686,
tid:27152
05-19 [Link].013 479 1594 I libPowerHal: [PD] scn:1 hdl:25686
lock_user:[email protected] pid:918 tid:27152 dur:0
05-19 [Link].389 918 1088 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].390 918 1088 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].401 918 11716 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].401 918 11716 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].403 918 11716 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].404 918 11716 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].406 918 11716 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].591 918 27235 E VDO_LOG : GetDecoderAPI hWrapper 0xea1c8810
05-19 [Link].591 918 27235 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].591 918 27235 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].593 918 27235 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].593 918 27235 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43746
05-19 [Link].594 918 27235 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe245f000
05-19 [Link].594 918 27235 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].605 918 27244 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27244
05-19 [Link].608 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25692 hint:-1
pid:918 duration:0 => ret_hdl:25692
05-19 [Link].608 479 1594 I libPowerHal: [PE] scn:1 hdl:25692
lock_user:[email protected] pid:918 tid:27244 dur:0
05-19 [Link].609 918 27244 I mtkpower_client: ret_hdl:25692
05-19 [Link].637 918 27235 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].637 918 27235 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].637 918 27235 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].637 918 27235 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].637 918 27235 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].653 918 27147 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].676 918 27147 I mtkpower_client: perf_lock_rel, hdl:25687,
tid:27147
05-19 [Link].678 918 27147 I mtkpower_client: perf_lock_rel, hdl:25686,
tid:27147
05-19 [Link].679 918 27147 I mtkpower_client: perf_lock_rel, hdl:25685,
tid:27147
05-19 [Link].680 479 1594 I libPowerHal: [PD] scn:0 hdl:25685
lock_user:[email protected] pid:918 tid:27152 dur:0
05-19 [Link].680 918 27147 I mtkpower_client: perf_lock_rel, hdl:25684,
tid:27147
05-19 [Link].980 918 27243 I mtkpower_client: perf_lock_rel, hdl:25692,
tid:27243
05-19 [Link].980 918 27243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27243
05-19 [Link].982 479 1594 I libPowerHal: [PD] scn:1 hdl:25692
lock_user:[email protected] pid:918 tid:27244 dur:0
05-19 [Link].982 918 27243 I mtkpower_client: ret_hdl:25696
05-19 [Link].982 918 27243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27243
05-19 [Link].984 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25696 hint:-1
pid:918 duration:0 => ret_hdl:25696
05-19 [Link].984 479 1594 I libPowerHal: [PE] scn:4 hdl:25696
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].985 918 27243 I mtkpower_client: ret_hdl:25697
05-19 [Link].985 918 27243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27243
05-19 [Link].985 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25697 hint:-1
pid:918 duration:0 => ret_hdl:25697
05-19 [Link].985 479 1594 I libPowerHal: [PE] scn:1 hdl:25697
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].986 918 27243 I mtkpower_client: ret_hdl:25698
05-19 [Link].987 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25698 hint:-1
pid:918 duration:0 => ret_hdl:25698
05-19 [Link].987 479 1594 I libPowerHal: [PE] scn:5 hdl:25698
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].035 918 27243 I mtkpower_client: perf_lock_rel, hdl:25698,
tid:27243
05-19 [Link].035 918 27243 I mtkpower_client: perf_lock_rel, hdl:25697,
tid:27243
05-19 [Link].036 479 1594 I libPowerHal: [PD] scn:5 hdl:25698
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].037 479 1594 I libPowerHal: [PD] scn:1 hdl:25697
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].114 918 5033 E OMXNodeInstance:
setParameter(0xea486004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].114 918 5033 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].117 918 5033 E MtkOmxVdecEx: [0xea486000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].117 918 5033 E OMXNodeInstance:
setConfig(0xea486004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].117 918 5033 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].117 918 5033 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].118 918 5033 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].166 918 27283 E VDO_LOG : GetDecoderAPI hWrapper 0xea21d810
05-19 [Link].166 918 27283 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].166 918 27283 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].167 918 27283 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].167 918 27283 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 9568
05-19 [Link].167 918 27283 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe158d000
05-19 [Link].167 918 27283 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].174 918 27293 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27293
05-19 [Link].176 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25701 hint:-1
pid:918 duration:0 => ret_hdl:25701
05-19 [Link].176 479 1594 I libPowerHal: [PE] scn:2 hdl:25701
lock_user:[email protected] pid:918 tid:27293 dur:0
05-19 [Link].178 918 27293 I mtkpower_client: ret_hdl:25701
05-19 [Link].192 918 27283 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].192 918 27283 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].192 918 27283 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].192 918 27283 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].192 918 27283 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].247 918 27243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27243
05-19 [Link].248 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25702 hint:-1
pid:918 duration:0 => ret_hdl:25702
05-19 [Link].248 479 1594 I libPowerHal: [PE] scn:1 hdl:25702
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].249 918 27243 I mtkpower_client: ret_hdl:25702
05-19 [Link].249 918 27243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27243
05-19 [Link].249 918 27243 I mtkpower_client: ret_hdl:25703
05-19 [Link].250 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25703 hint:-1
pid:918 duration:0 => ret_hdl:25703
05-19 [Link].250 479 1594 I libPowerHal: [PE] scn:3 hdl:25703
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].449 918 27234 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].464 918 27289 I mtkpower_client: perf_lock_rel, hdl:25701,
tid:27289
05-19 [Link].464 918 27289 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27289
05-19 [Link].465 479 1594 I libPowerHal: [PD] scn:2 hdl:25701
lock_user:[email protected] pid:918 tid:27293 dur:0
05-19 [Link].466 918 27234 I mtkpower_client: perf_lock_rel, hdl:25703,
tid:27234
05-19 [Link].466 918 27289 I mtkpower_client: ret_hdl:25704
05-19 [Link].466 918 27289 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27289
05-19 [Link].466 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25704 hint:-1
pid:918 duration:0 => ret_hdl:25704
05-19 [Link].466 479 1594 I libPowerHal: [PE] scn:0 hdl:25704
lock_user:[email protected] pid:918 tid:27289 dur:0
05-19 [Link].468 918 27289 I mtkpower_client: ret_hdl:25705
05-19 [Link].468 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25705 hint:-1
pid:918 duration:0 => ret_hdl:25705
05-19 [Link].468 479 1594 I libPowerHal: [PE] scn:2 hdl:25705
lock_user:[email protected] pid:918 tid:27289 dur:0
05-19 [Link].468 918 27234 I mtkpower_client: perf_lock_rel, hdl:25702,
tid:27234
05-19 [Link].469 918 27234 I mtkpower_client: perf_lock_rel, hdl:25696,
tid:27234
05-19 [Link].469 918 27234 I mtkpower_client: perf_lock_rel, hdl:25692,
tid:27234
05-19 [Link].469 479 1594 I libPowerHal: [PD] scn:3 hdl:25703
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].471 479 1594 I libPowerHal: [PD] scn:1 hdl:25702
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].472 479 1594 I libPowerHal: [PD] scn:4 hdl:25696
lock_user:[email protected] pid:918 tid:27243 dur:0
05-19 [Link].642 918 27289 I mtkpower_client: perf_lock_rel, hdl:25705,
tid:27289
05-19 [Link].643 479 1594 I libPowerHal: [PD] scn:2 hdl:25705
lock_user:[email protected] pid:918 tid:27289 dur:0
05-19 [Link].773 918 5033 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].774 918 5033 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].778 918 11716 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].778 918 11716 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].779 918 1721 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].779 918 1088 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].780 918 1959 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].842 918 27339 E VDO_LOG : GetDecoderAPI hWrapper 0xea2f0810
05-19 [Link].842 918 27339 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].842 918 27339 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].844 918 27339 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].844 918 27339 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43746
05-19 [Link].844 918 27339 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2bf5000
05-19 [Link].844 918 27339 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].852 918 27344 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27344
05-19 [Link].853 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25711 hint:-1
pid:918 duration:0 => ret_hdl:25711
05-19 [Link].853 479 1594 I libPowerHal: [PE] scn:2 hdl:25711
lock_user:[email protected] pid:918 tid:27344 dur:0
05-19 [Link].854 918 27344 I mtkpower_client: ret_hdl:25711
05-19 [Link].905 918 27339 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].905 918 27339 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].905 918 27339 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].905 918 27339 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].905 918 27339 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].034 918 27282 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].051 918 27282 I mtkpower_client: perf_lock_rel, hdl:25705,
tid:27282
05-19 [Link].053 918 27282 I mtkpower_client: perf_lock_rel, hdl:25704,
tid:27282
05-19 [Link].056 479 1594 I libPowerHal: [PD] scn:0 hdl:25704
lock_user:[email protected] pid:918 tid:27289 dur:0
05-19 [Link].058 918 27282 I mtkpower_client: perf_lock_rel, hdl:25701,
tid:27282
05-19 [Link].275 918 27343 I mtkpower_client: perf_lock_rel, hdl:25711,
tid:27343
05-19 [Link].275 918 27343 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27343
05-19 [Link].276 479 1594 I libPowerHal: [PD] scn:2 hdl:25711
lock_user:[email protected] pid:918 tid:27344 dur:0
05-19 [Link].277 918 27343 I mtkpower_client: ret_hdl:25717
05-19 [Link].277 918 27343 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27343
05-19 [Link].278 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25717 hint:-1
pid:918 duration:0 => ret_hdl:25717
05-19 [Link].278 479 1594 I libPowerHal: [PE] scn:1 hdl:25717
lock_user:[email protected] pid:918 tid:27343 dur:0
05-19 [Link].278 918 27343 I mtkpower_client: ret_hdl:25718
05-19 [Link].278 918 27343 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27343
05-19 [Link].279 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25718 hint:-1
pid:918 duration:0 => ret_hdl:25718
05-19 [Link].279 479 1594 I libPowerHal: [PE] scn:2 hdl:25718
lock_user:[email protected] pid:918 tid:27343 dur:0
05-19 [Link].279 918 27343 I mtkpower_client: ret_hdl:25719
05-19 [Link].280 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25719 hint:-1
pid:918 duration:0 => ret_hdl:25719
05-19 [Link].280 479 1594 I libPowerHal: [PE] scn:3 hdl:25719
lock_user:[email protected] pid:918 tid:27343 dur:0
05-19 [Link].310 918 15538 E OMXNodeInstance:
setParameter(0xea486004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].310 918 15538 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].319 918 32761 E MtkOmxVdecEx: [0xea486000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].319 918 32761 E OMXNodeInstance:
setConfig(0xea486004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].319 918 32761 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].320 918 32761 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].321 918 32761 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].342 918 27343 I mtkpower_client: perf_lock_rel, hdl:25719,
tid:27343
05-19 [Link].343 479 1594 I libPowerHal: [PD] scn:3 hdl:25719
lock_user:[email protected] pid:918 tid:27343 dur:0
05-19 [Link].418 918 27385 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].418 918 27385 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].418 918 27385 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].419 918 27385 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].419 918 27385 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 68912
05-19 [Link].419 918 27385 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe065c000
05-19 [Link].419 918 27385 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].423 918 27391 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27391
05-19 [Link].424 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25720 hint:-1
pid:918 duration:0 => ret_hdl:25720
05-19 [Link].424 479 1594 I libPowerHal: [PE] scn:3 hdl:25720
lock_user:[email protected] pid:918 tid:27391 dur:0
05-19 [Link].425 918 27391 I mtkpower_client: ret_hdl:25720
05-19 [Link].457 918 27385 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].457 918 27385 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].457 918 27385 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].457 918 27385 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].457 918 27385 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].500 918 27338 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].511 918 27338 I mtkpower_client: perf_lock_rel, hdl:25719,
tid:27338
05-19 [Link].513 918 27338 I mtkpower_client: perf_lock_rel, hdl:25718,
tid:27338
05-19 [Link].513 918 27338 I mtkpower_client: perf_lock_rel, hdl:25717,
tid:27338
05-19 [Link].514 918 27338 I mtkpower_client: perf_lock_rel, hdl:25711,
tid:27338
05-19 [Link].514 479 1594 I libPowerHal: [PD] scn:2 hdl:25718
lock_user:[email protected] pid:918 tid:27343 dur:0
05-19 [Link].515 479 1594 I libPowerHal: [PD] scn:1 hdl:25717
lock_user:[email protected] pid:918 tid:27343 dur:0
05-19 [Link].669 918 27390 I mtkpower_client: perf_lock_rel, hdl:25720,
tid:27390
05-19 [Link].669 918 27390 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27390
05-19 [Link].670 479 1594 I libPowerHal: [PD] scn:3 hdl:25720
lock_user:[email protected] pid:918 tid:27391 dur:0
05-19 [Link].672 918 27390 I mtkpower_client: ret_hdl:25721
05-19 [Link].672 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25721 hint:-1
pid:918 duration:0 => ret_hdl:25721
05-19 [Link].672 479 1594 I libPowerHal: [PE] scn:1 hdl:25721
lock_user:[email protected] pid:918 tid:27390 dur:0
05-19 [Link].301 918 1784 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].301 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].304 918 1784 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].304 918 1784 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].305 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].305 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].305 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].380 918 27428 E VDO_LOG : GetDecoderAPI hWrapper 0xea241810
05-19 [Link].380 918 27428 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].380 918 27428 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].380 918 27428 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].380 918 27428 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 41112
05-19 [Link].380 918 27428 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2c5d000
05-19 [Link].381 918 27428 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].384 918 27434 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27434
05-19 [Link].387 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25725 hint:-1
pid:918 duration:0 => ret_hdl:25725
05-19 [Link].387 479 1594 I libPowerHal: [PE] scn:0 hdl:25725
lock_user:[email protected] pid:918 tid:27434 dur:0
05-19 [Link].389 918 27434 I mtkpower_client: ret_hdl:25725
05-19 [Link].406 918 27428 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].406 918 27428 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].406 918 27428 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].406 918 27428 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].406 918 27428 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].448 918 27390 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27390
05-19 [Link].449 918 27390 I mtkpower_client: ret_hdl:25726
05-19 [Link].449 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25726 hint:-1
pid:918 duration:0 => ret_hdl:25726
05-19 [Link].450 479 1594 I libPowerHal: [PE] scn:4 hdl:25726
lock_user:[email protected] pid:918 tid:27390 dur:0
05-19 [Link].510 918 27390 I mtkpower_client: perf_lock_rel, hdl:25726,
tid:27390
05-19 [Link].511 479 1594 I libPowerHal: [PD] scn:4 hdl:25726
lock_user:[email protected] pid:918 tid:27390 dur:0
05-19 [Link].562 918 27433 I mtkpower_client: perf_lock_rel, hdl:25725,
tid:27433
05-19 [Link].562 918 27433 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27433
05-19 [Link].564 479 1594 I libPowerHal: [PD] scn:0 hdl:25725
lock_user:[email protected] pid:918 tid:27434 dur:0
05-19 [Link].565 918 27433 I mtkpower_client: ret_hdl:25728
05-19 [Link].565 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25728 hint:-1
pid:918 duration:0 => ret_hdl:25728
05-19 [Link].565 479 1594 I libPowerHal: [PE] scn:2 hdl:25728
lock_user:[email protected] pid:918 tid:27433 dur:0
05-19 [Link].642 918 27427 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].654 918 27427 I mtkpower_client: perf_lock_rel, hdl:25728,
tid:27427
05-19 [Link].655 918 27427 I mtkpower_client: perf_lock_rel, hdl:25725,
tid:27427
05-19 [Link].656 479 1594 I libPowerHal: [PD] scn:2 hdl:25728
lock_user:[email protected] pid:918 tid:27433 dur:0
05-19 [Link].214 918 32761 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].214 918 32761 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].218 918 32761 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].218 918 32761 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].218 918 32761 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].219 918 32761 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].219 918 32761 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].276 918 27473 E VDO_LOG : GetDecoderAPI hWrapper 0xea241810
05-19 [Link].277 918 27473 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].277 918 27473 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].278 918 27473 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].279 918 27473 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 41112
05-19 [Link].279 918 27473 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2a24000
05-19 [Link].279 918 27473 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].282 918 27479 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27479
05-19 [Link].283 918 27479 I mtkpower_client: ret_hdl:25732
05-19 [Link].284 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25732 hint:-1
pid:918 duration:0 => ret_hdl:25732
05-19 [Link].284 479 1594 I libPowerHal: [PE] scn:2 hdl:25732
lock_user:[email protected] pid:918 tid:27479 dur:0
05-19 [Link].313 918 27473 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].313 918 27473 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].313 918 27473 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].313 918 27473 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].313 918 27473 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].864 918 27384 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].887 918 27384 I mtkpower_client: perf_lock_rel, hdl:25726,
tid:27384
05-19 [Link].887 918 27384 I mtkpower_client: perf_lock_rel, hdl:25721,
tid:27384
05-19 [Link].887 918 27384 I mtkpower_client: perf_lock_rel, hdl:25720,
tid:27384
05-19 [Link].891 479 1594 I libPowerHal: [PD] scn:1 hdl:25721
lock_user:[email protected] pid:918 tid:27390 dur:0
05-19 [Link].934 918 27478 I mtkpower_client: perf_lock_rel, hdl:25732,
tid:27478
05-19 [Link].934 918 27478 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27478
05-19 [Link].938 479 1594 I libPowerHal: [PD] scn:2 hdl:25732
lock_user:[email protected] pid:918 tid:27479 dur:0
05-19 [Link].940 918 27478 I mtkpower_client: ret_hdl:25735
05-19 [Link].940 918 27478 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27478
05-19 [Link].941 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25735 hint:-1
pid:918 duration:0 => ret_hdl:25735
05-19 [Link].941 479 1594 I libPowerHal: [PE] scn:1 hdl:25735
lock_user:[email protected] pid:918 tid:27478 dur:0
05-19 [Link].942 918 27478 I mtkpower_client: ret_hdl:25736
05-19 [Link].943 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25736 hint:-1
pid:918 duration:0 => ret_hdl:25736
05-19 [Link].943 479 1594 I libPowerHal: [PE] scn:2 hdl:25736
lock_user:[email protected] pid:918 tid:27478 dur:0
05-19 [Link].211 918 27478 I mtkpower_client: perf_lock_rel, hdl:25736,
tid:27478
05-19 [Link].214 479 1594 I libPowerHal: [PD] scn:2 hdl:25736
lock_user:[email protected] pid:918 tid:27478 dur:0
05-19 [Link].480 918 918 E OMXNodeInstance:
setParameter(0xea4f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].481 918 918 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].484 918 918 E MtkOmxVdecEx: [0xea4f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].484 918 918 E OMXNodeInstance:
setConfig(0xea4f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 918 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 918 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].486 918 918 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].545 918 27520 E VDO_LOG : GetDecoderAPI hWrapper 0xea21d810
05-19 [Link].545 918 27520 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].545 918 27520 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].546 918 27520 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].546 918 27520 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 228430
05-19 [Link].546 918 27520 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe085e000
05-19 [Link].546 918 27520 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1344, Offset 0, Padding 0
05-19 [Link].549 918 27524 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27524
05-19 [Link].551 918 27524 I mtkpower_client: ret_hdl:25740
05-19 [Link].551 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25740 hint:-1
pid:918 duration:0 => ret_hdl:25740
05-19 [Link].552 479 1594 I libPowerHal: [PE] scn:0 hdl:25740
lock_user:[email protected] pid:918 tid:27524 dur:0
05-19 [Link].574 918 27520 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].574 918 27520 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].575 918 27520 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].575 918 27520 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].575 918 27520 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].151 918 27472 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].190 918 27472 I mtkpower_client: perf_lock_rel, hdl:25736,
tid:27472
05-19 [Link].190 918 27472 I mtkpower_client: perf_lock_rel, hdl:25735,
tid:27472
05-19 [Link].191 918 27472 I mtkpower_client: perf_lock_rel, hdl:25732,
tid:27472
05-19 [Link].196 479 1594 I libPowerHal: [PD] scn:1 hdl:25735
lock_user:[email protected] pid:918 tid:27478 dur:0
05-19 [Link].210 918 27523 I mtkpower_client: perf_lock_rel, hdl:25740,
tid:27523
05-19 [Link].210 918 27523 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27523
05-19 [Link].211 479 1594 I libPowerHal: [PD] scn:0 hdl:25740
lock_user:[email protected] pid:918 tid:27524 dur:0
05-19 [Link].212 918 27523 I mtkpower_client: ret_hdl:25743
05-19 [Link].213 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25743 hint:-1
pid:918 duration:0 => ret_hdl:25743
05-19 [Link].213 479 1594 I libPowerHal: [PE] scn:1 hdl:25743
lock_user:[email protected] pid:918 tid:27523 dur:0
05-19 [Link].507 918 27523 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27523
05-19 [Link].508 918 27523 I mtkpower_client: ret_hdl:25744
05-19 [Link].508 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25744 hint:-1
pid:918 duration:0 => ret_hdl:25744
05-19 [Link].509 479 1594 I libPowerHal: [PE] scn:0 hdl:25744
lock_user:[email protected] pid:918 tid:27523 dur:0
05-19 [Link].561 918 27523 I mtkpower_client: perf_lock_rel, hdl:25744,
tid:27523
05-19 [Link].562 479 1594 I libPowerHal: [PD] scn:0 hdl:25744
lock_user:[email protected] pid:918 tid:27523 dur:0
05-19 [Link].817 918 15538 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].817 918 11689 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 11689 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].826 918 11689 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 5724 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 1065 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].828 918 15538 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].977 918 27565 E VDO_LOG : GetDecoderAPI hWrapper 0xea1c8810
05-19 [Link].978 918 27565 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].978 918 27565 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].984 918 27565 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].985 918 27565 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16065
05-19 [Link].985 918 27565 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].985 918 27565 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].006 918 27573 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27573
05-19 [Link].007 918 27573 I mtkpower_client: ret_hdl:25750
05-19 [Link].007 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25750 hint:-1
pid:918 duration:0 => ret_hdl:25750
05-19 [Link].007 479 1594 I libPowerHal: [PE] scn:3 hdl:25750
lock_user:[email protected] pid:918 tid:27573 dur:0
05-19 [Link].057 918 27565 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].058 918 27565 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].058 918 27565 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].058 918 27565 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].058 918 27565 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].211 918 27523 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27523
05-19 [Link].212 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25751 hint:-1
pid:918 duration:0 => ret_hdl:25751
05-19 [Link].212 479 1594 I libPowerHal: [PE] scn:2 hdl:25751
lock_user:[email protected] pid:918 tid:27523 dur:0
05-19 [Link].213 918 27523 I mtkpower_client: ret_hdl:25751
05-19 [Link].297 918 27519 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].308 918 27519 I mtkpower_client: perf_lock_rel, hdl:25751,
tid:27519
05-19 [Link].309 918 27519 I mtkpower_client: perf_lock_rel, hdl:25743,
tid:27519
05-19 [Link].309 918 27519 I mtkpower_client: perf_lock_rel, hdl:25740,
tid:27519
05-19 [Link].309 479 1594 I libPowerHal: [PD] scn:2 hdl:25751
lock_user:[email protected] pid:918 tid:27523 dur:0
05-19 [Link].310 479 1594 I libPowerHal: [PD] scn:1 hdl:25743
lock_user:[email protected] pid:918 tid:27523 dur:0
05-19 [Link].472 918 27572 I mtkpower_client: perf_lock_rel, hdl:25750,
tid:27572
05-19 [Link].472 918 27572 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27572
05-19 [Link].473 479 1594 I libPowerHal: [PD] scn:3 hdl:25750
lock_user:[email protected] pid:918 tid:27573 dur:0
05-19 [Link].474 918 27572 I mtkpower_client: ret_hdl:25753
05-19 [Link].474 918 27572 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27572
05-19 [Link].474 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25753 hint:-1
pid:918 duration:0 => ret_hdl:25753
05-19 [Link].474 479 1594 I libPowerHal: [PE] scn:0 hdl:25753
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].475 918 27572 I mtkpower_client: ret_hdl:25754
05-19 [Link].475 918 27572 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27572
05-19 [Link].475 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25754 hint:-1
pid:918 duration:0 => ret_hdl:25754
05-19 [Link].475 479 1594 I libPowerHal: [PE] scn:2 hdl:25754
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].476 918 27572 I mtkpower_client: ret_hdl:25755
05-19 [Link].476 918 27572 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27572
05-19 [Link].476 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25755 hint:-1
pid:918 duration:0 => ret_hdl:25755
05-19 [Link].476 479 1594 I libPowerHal: [PE] scn:3 hdl:25755
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].477 918 27572 I mtkpower_client: ret_hdl:25756
05-19 [Link].477 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25756 hint:-1
pid:918 duration:0 => ret_hdl:25756
05-19 [Link].477 479 1594 I libPowerHal: [PE] scn:4 hdl:25756
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].553 918 27572 I mtkpower_client: perf_lock_rel, hdl:25756,
tid:27572
05-19 [Link].554 479 1594 I libPowerHal: [PD] scn:4 hdl:25756
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].611 918 27572 I mtkpower_client: perf_lock_rel, hdl:25755,
tid:27572
05-19 [Link].613 479 1594 I libPowerHal: [PD] scn:3 hdl:25755
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].664 918 27572 I mtkpower_client: perf_lock_rel, hdl:25754,
tid:27572
05-19 [Link].665 479 1594 I libPowerHal: [PD] scn:2 hdl:25754
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].716 918 1721 E OMXNodeInstance:
setParameter(0xea4f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].716 918 1959 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].719 918 11717 E MtkOmxVdecEx: [0xea4f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].719 918 11717 E OMXNodeInstance:
setConfig(0xea4f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].719 918 1065 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].719 918 5724 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].720 918 13399 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].797 918 27611 E VDO_LOG : GetDecoderAPI hWrapper 0xea21d810
05-19 [Link].797 918 27611 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].797 918 27611 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].798 918 27611 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].798 918 27611 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40039
05-19 [Link].798 918 27611 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0a5e000
05-19 [Link].798 918 27611 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].807 918 27617 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27617
05-19 [Link].808 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25759 hint:-1
pid:918 duration:0 => ret_hdl:25759
05-19 [Link].808 479 1594 I libPowerHal: [PE] scn:2 hdl:25759
lock_user:[email protected] pid:918 tid:27617 dur:0
05-19 [Link].808 918 27617 I mtkpower_client: ret_hdl:25759
05-19 [Link].823 918 27611 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].823 918 27611 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].823 918 27611 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].823 918 27611 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].823 918 27611 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].870 918 27572 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27572
05-19 [Link].872 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25760 hint:-1
pid:918 duration:0 => ret_hdl:25760
05-19 [Link].872 479 1594 I libPowerHal: [PE] scn:3 hdl:25760
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].873 918 27572 I mtkpower_client: ret_hdl:25760
05-19 [Link].969 918 27572 I mtkpower_client: perf_lock_rel, hdl:25760,
tid:27572
05-19 [Link].973 479 1594 I libPowerHal: [PD] scn:3 hdl:25760
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].356 918 27564 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].389 918 27564 I mtkpower_client: perf_lock_rel, hdl:25756,
tid:27564
05-19 [Link].389 918 27564 I mtkpower_client: perf_lock_rel, hdl:25755,
tid:27564
05-19 [Link].389 918 27564 I mtkpower_client: perf_lock_rel, hdl:25760,
tid:27564
05-19 [Link].389 918 27564 I mtkpower_client: perf_lock_rel, hdl:25753,
tid:27564
05-19 [Link].389 918 27564 I mtkpower_client: perf_lock_rel, hdl:25750,
tid:27564
05-19 [Link].394 479 1594 I libPowerHal: [PD] scn:0 hdl:25753
lock_user:[email protected] pid:918 tid:27572 dur:0
05-19 [Link].407 918 27616 I mtkpower_client: perf_lock_rel, hdl:25759,
tid:27616
05-19 [Link].407 918 27616 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27616
05-19 [Link].408 918 27616 I mtkpower_client: ret_hdl:25763
05-19 [Link].409 479 1594 I libPowerHal: [PD] scn:2 hdl:25759
lock_user:[email protected] pid:918 tid:27617 dur:0
05-19 [Link].410 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25763 hint:-1
pid:918 duration:0 => ret_hdl:25763
05-19 [Link].410 479 1594 I libPowerHal: [PE] scn:0 hdl:25763
lock_user:[email protected] pid:918 tid:27616 dur:0
05-19 [Link].529 918 27610 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].539 918 27610 I mtkpower_client: perf_lock_rel, hdl:25763,
tid:27610
05-19 [Link].540 918 27610 I mtkpower_client: perf_lock_rel, hdl:25759,
tid:27610
05-19 [Link].540 479 1594 I libPowerHal: [PD] scn:0 hdl:25763
lock_user:[email protected] pid:918 tid:27616 dur:0
05-19 [Link].541 918 27610 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].542 918 27610 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].542 918 27610 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].542 918 27610 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].026 918 11689 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].027 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].031 918 1065 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].031 918 1065 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 1721 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 1065 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].033 918 11717 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].066 918 27664 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].066 918 27664 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].066 918 27664 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].067 918 27664 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].067 918 27664 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].068 918 27664 E VDO_LOG : GetDecoderAPI hWrapper 0xea2f0810
05-19 [Link].068 918 27664 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].068 918 27664 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].237 918 27664 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].237 918 27664 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17118
05-19 [Link].237 918 27664 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].237 918 27664 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].239 918 27671 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27671
05-19 [Link].240 918 27671 I mtkpower_client: ret_hdl:25774
05-19 [Link].240 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25774 hint:-1
pid:918 duration:0 => ret_hdl:25774
05-19 [Link].240 479 1594 I libPowerHal: [PE] scn:1 hdl:25774
lock_user:[email protected] pid:918 tid:27671 dur:0
05-19 [Link].244 918 27664 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].244 918 27664 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].245 918 27664 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].245 918 27664 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].245 918 27664 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].418 918 27670 I mtkpower_client: perf_lock_rel, hdl:25774,
tid:27670
05-19 [Link].418 918 27670 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27670
05-19 [Link].419 479 1594 I libPowerHal: [PD] scn:1 hdl:25774
lock_user:[email protected] pid:918 tid:27671 dur:0
05-19 [Link].420 918 27670 I mtkpower_client: ret_hdl:25775
05-19 [Link].421 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25775 hint:-1
pid:918 duration:0 => ret_hdl:25775
05-19 [Link].421 479 1594 I libPowerHal: [PE] scn:2 hdl:25775
lock_user:[email protected] pid:918 tid:27670 dur:0
05-19 [Link].032 918 11717 E OMXNodeInstance:
setParameter(0xea4f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].033 918 11717 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].038 918 1780 E MtkOmxVdecEx: [0xea4f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].039 918 1780 E OMXNodeInstance:
setConfig(0xea4f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].039 918 1085 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].040 918 1088 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].041 918 11716 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].197 918 27705 E VDO_LOG : GetDecoderAPI hWrapper 0xea0a8810
05-19 [Link].197 918 27705 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].197 918 27705 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].197 918 27705 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].198 918 27705 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8785
05-19 [Link].198 918 27705 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde1c8000
05-19 [Link].198 918 27705 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].206 918 27711 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27711
05-19 [Link].209 918 27711 I mtkpower_client: ret_hdl:25779
05-19 [Link].209 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25779 hint:-1
pid:918 duration:0 => ret_hdl:25779
05-19 [Link].209 479 1594 I libPowerHal: [PE] scn:0 hdl:25779
lock_user:[email protected] pid:918 tid:27711 dur:0
05-19 [Link].257 918 27705 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].257 918 27705 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].258 918 27705 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].258 918 27705 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].258 918 27705 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].331 918 27670 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27670
05-19 [Link].334 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25780 hint:-1
pid:918 duration:0 => ret_hdl:25780
05-19 [Link].334 479 1594 I libPowerHal: [PE] scn:4 hdl:25780
lock_user:[email protected] pid:918 tid:27670 dur:0
05-19 [Link].337 918 27670 I mtkpower_client: ret_hdl:25780
05-19 [Link].447 918 27670 I mtkpower_client: perf_lock_rel, hdl:25780,
tid:27670
05-19 [Link].448 479 1594 I libPowerHal: [PD] scn:4 hdl:25780
lock_user:[email protected] pid:918 tid:27670 dur:0
05-19 [Link].525 918 27710 I mtkpower_client: perf_lock_rel, hdl:25779,
tid:27710
05-19 [Link].525 918 27710 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27710
05-19 [Link].526 479 1594 I libPowerHal: [PD] scn:0 hdl:25779
lock_user:[email protected] pid:918 tid:27711 dur:0
05-19 [Link].526 918 27710 I mtkpower_client: ret_hdl:25783
05-19 [Link].526 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25783 hint:-1
pid:918 duration:0 => ret_hdl:25783
05-19 [Link].526 479 1594 I libPowerHal: [PE] scn:3 hdl:25783
lock_user:[email protected] pid:918 tid:27710 dur:0
05-19 [Link].603 918 27663 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].620 918 27663 I mtkpower_client: perf_lock_rel, hdl:25780,
tid:27663
05-19 [Link].621 918 27663 I mtkpower_client: perf_lock_rel, hdl:25775,
tid:27663
05-19 [Link].621 918 27663 I mtkpower_client: perf_lock_rel, hdl:25774,
tid:27663
05-19 [Link].622 479 1594 I libPowerHal: [PD] scn:2 hdl:25775
lock_user:[email protected] pid:918 tid:27670 dur:0
05-19 [Link].666 918 27710 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27710
05-19 [Link].668 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25784 hint:-1
pid:918 duration:0 => ret_hdl:25784
05-19 [Link].668 479 1594 I libPowerHal: [PE] scn:0 hdl:25784
lock_user:[email protected] pid:918 tid:27710 dur:0
05-19 [Link].670 918 27710 I mtkpower_client: ret_hdl:25784
05-19 [Link].751 918 27710 I mtkpower_client: perf_lock_rel, hdl:25784,
tid:27710
05-19 [Link].752 479 1594 I libPowerHal: [PD] scn:0 hdl:25784
lock_user:[email protected] pid:918 tid:27710 dur:0
05-19 [Link].301 918 11717 E OMXNodeInstance:
setParameter(0xea2b0804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].301 918 11717 E OMXNodeInstance:
getParameter(0xea2b0804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].303 918 11717 E MtkOmxVdecEx: [0xea2b0800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].303 918 11717 E OMXNodeInstance:
setConfig(0xea2b0804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].303 918 11717 E OMXNodeInstance:
getParameter(0xea2b0804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].304 918 11717 E OMXNodeInstance:
getConfig(0xea2b0804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].304 918 11717 E OMXNodeInstance:
getConfig(0xea2b0804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].377 918 27751 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].378 918 27751 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].378 918 27751 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].378 918 27751 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].378 918 27751 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8613
05-19 [Link].378 918 27751 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].378 918 27751 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].380 918 27757 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27757
05-19 [Link].382 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25788 hint:-1
pid:918 duration:0 => ret_hdl:25788
05-19 [Link].382 479 1594 I libPowerHal: [PE] scn:1 hdl:25788
lock_user:[email protected] pid:918 tid:27757 dur:0
05-19 [Link].382 918 27757 I mtkpower_client: ret_hdl:25788
05-19 [Link].392 918 27751 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].392 918 27751 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].392 918 27751 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].392 918 27751 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].393 918 27751 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].490 918 27756 I mtkpower_client: perf_lock_rel, hdl:25788,
tid:27756
05-19 [Link].490 918 27756 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27756
05-19 [Link].491 479 1594 I libPowerHal: [PD] scn:1 hdl:25788
lock_user:[email protected] pid:918 tid:27757 dur:0
05-19 [Link].492 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25791 hint:-1
pid:918 duration:0 => ret_hdl:25791
05-19 [Link].492 479 1594 I libPowerHal: [PE] scn:2 hdl:25791
lock_user:[email protected] pid:918 tid:27756 dur:0
05-19 [Link].493 918 27756 I mtkpower_client: ret_hdl:25791
05-19 [Link].642 918 27704 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].658 918 27704 I mtkpower_client: perf_lock_rel, hdl:25784,
tid:27704
05-19 [Link].658 918 27704 I mtkpower_client: perf_lock_rel, hdl:25783,
tid:27704
05-19 [Link].659 918 27704 I mtkpower_client: perf_lock_rel, hdl:25779,
tid:27704
05-19 [Link].662 479 1594 I libPowerHal: [PD] scn:3 hdl:25783
lock_user:[email protected] pid:918 tid:27710 dur:0
05-19 [Link].251 918 15538 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].251 918 15538 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].255 918 15538 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].255 918 15538 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].256 918 15538 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].256 918 15538 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].260 918 15538 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].385 918 27796 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].385 918 27796 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].385 918 27796 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].386 918 27796 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].386 918 27796 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 13641
05-19 [Link].386 918 27796 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde872000
05-19 [Link].386 918 27796 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].391 918 27802 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27802
05-19 [Link].393 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25795 hint:-1
pid:918 duration:0 => ret_hdl:25795
05-19 [Link].394 479 1594 I libPowerHal: [PE] scn:0 hdl:25795
lock_user:[email protected] pid:918 tid:27802 dur:0
05-19 [Link].394 918 27802 I mtkpower_client: ret_hdl:25795
05-19 [Link].440 918 27796 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].440 918 27796 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].440 918 27796 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].440 918 27796 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].440 918 27796 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].240 918 27750 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].257 918 27750 I mtkpower_client: perf_lock_rel, hdl:25791,
tid:27750
05-19 [Link].258 918 27750 I mtkpower_client: perf_lock_rel, hdl:25788,
tid:27750
05-19 [Link].258 479 1594 I libPowerHal: [PD] scn:2 hdl:25791
lock_user:[email protected] pid:918 tid:27756 dur:0
05-19 [Link].305 918 27801 I mtkpower_client: perf_lock_rel, hdl:25795,
tid:27801
05-19 [Link].306 918 27801 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27801
05-19 [Link].310 479 1594 I libPowerHal: [PD] scn:0 hdl:25795
lock_user:[email protected] pid:918 tid:27802 dur:0
05-19 [Link].312 918 27801 I mtkpower_client: ret_hdl:25798
05-19 [Link].312 918 27801 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27801
05-19 [Link].313 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25798 hint:-1
pid:918 duration:0 => ret_hdl:25798
05-19 [Link].313 479 1594 I libPowerHal: [PE] scn:0 hdl:25798
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].320 918 27801 I mtkpower_client: ret_hdl:25799
05-19 [Link].320 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25799 hint:-1
pid:918 duration:0 => ret_hdl:25799
05-19 [Link].320 479 1594 I libPowerHal: [PE] scn:2 hdl:25799
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].467 918 27801 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27801
05-19 [Link].468 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25800 hint:-1
pid:918 duration:0 => ret_hdl:25800
05-19 [Link].468 479 1594 I libPowerHal: [PE] scn:3 hdl:25800
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].469 918 27801 I mtkpower_client: ret_hdl:25800
05-19 [Link].569 918 27801 I mtkpower_client: perf_lock_rel, hdl:25800,
tid:27801
05-19 [Link].570 479 1594 I libPowerHal: [PD] scn:3 hdl:25800
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].974 918 11717 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].975 918 11717 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].980 918 11716 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].980 918 11716 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].981 918 11716 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].981 918 1780 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].982 918 6021 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].043 918 27842 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].044 918 27842 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].044 918 27842 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].044 918 27842 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].045 918 27842 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 22341
05-19 [Link].045 918 27842 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe29bc000
05-19 [Link].045 918 27842 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].055 918 27849 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27849
05-19 [Link].056 918 27849 I mtkpower_client: ret_hdl:25806
05-19 [Link].056 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25806 hint:-1
pid:918 duration:0 => ret_hdl:25806
05-19 [Link].056 479 1594 I libPowerHal: [PE] scn:4 hdl:25806
lock_user:[email protected] pid:918 tid:27849 dur:0
05-19 [Link].081 918 27842 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].081 918 27842 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].081 918 27842 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].081 918 27842 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].081 918 27842 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].276 918 27801 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27801
05-19 [Link].279 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25807 hint:-1
pid:918 duration:0 => ret_hdl:25807
05-19 [Link].279 479 1594 I libPowerHal: [PE] scn:3 hdl:25807
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].282 918 27801 I mtkpower_client: ret_hdl:25807
05-19 [Link].282 918 27801 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27801
05-19 [Link].283 918 27801 I mtkpower_client: ret_hdl:25808
05-19 [Link].283 918 27801 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27801
05-19 [Link].283 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25808 hint:-1
pid:918 duration:0 => ret_hdl:25808
05-19 [Link].283 479 1594 I libPowerHal: [PE] scn:5 hdl:25808
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].286 918 27801 I mtkpower_client: ret_hdl:25809
05-19 [Link].287 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25809 hint:-1
pid:918 duration:0 => ret_hdl:25809
05-19 [Link].287 479 1594 I libPowerHal: [PE] scn:6 hdl:25809
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].317 918 27795 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].365 918 27795 I mtkpower_client: perf_lock_rel, hdl:25809,
tid:27795
05-19 [Link].366 918 27795 I mtkpower_client: perf_lock_rel, hdl:25808,
tid:27795
05-19 [Link].366 918 27795 I mtkpower_client: perf_lock_rel, hdl:25807,
tid:27795
05-19 [Link].366 918 27795 I mtkpower_client: perf_lock_rel, hdl:25799,
tid:27795
05-19 [Link].366 918 27795 I mtkpower_client: perf_lock_rel, hdl:25798,
tid:27795
05-19 [Link].366 918 27795 I mtkpower_client: perf_lock_rel, hdl:25795,
tid:27795
05-19 [Link].368 479 1594 I libPowerHal: [PD] scn:6 hdl:25809
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].370 479 1594 I libPowerHal: [PD] scn:5 hdl:25808
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].373 479 1594 I libPowerHal: [PD] scn:3 hdl:25807
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].380 479 1594 I libPowerHal: [PD] scn:2 hdl:25799
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].382 479 1594 I libPowerHal: [PD] scn:0 hdl:25798
lock_user:[email protected] pid:918 tid:27801 dur:0
05-19 [Link].424 918 27848 I mtkpower_client: perf_lock_rel, hdl:25806,
tid:27848
05-19 [Link].425 918 27848 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27848
05-19 [Link].426 479 1594 I libPowerHal: [PD] scn:4 hdl:25806
lock_user:[email protected] pid:918 tid:27849 dur:0
05-19 [Link].427 918 27848 I mtkpower_client: ret_hdl:25810
05-19 [Link].428 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25810 hint:-1
pid:918 duration:0 => ret_hdl:25810
05-19 [Link].428 479 1594 I libPowerHal: [PE] scn:0 hdl:25810
lock_user:[email protected] pid:918 tid:27848 dur:0
05-19 [Link].679 918 27848 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27848
05-19 [Link].680 918 27848 I mtkpower_client: ret_hdl:25812
05-19 [Link].680 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25812 hint:-1
pid:918 duration:0 => ret_hdl:25812
05-19 [Link].680 479 1594 I libPowerHal: [PE] scn:1 hdl:25812
lock_user:[email protected] pid:918 tid:27848 dur:0
05-19 [Link].758 918 27848 I mtkpower_client: perf_lock_rel, hdl:25812,
tid:27848
05-19 [Link].759 479 1594 I libPowerHal: [PD] scn:1 hdl:25812
lock_user:[email protected] pid:918 tid:27848 dur:0
05-19 [Link].871 918 1064 E OMXNodeInstance:
setParameter(0xea0d0004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].872 918 1064 E OMXNodeInstance:
getParameter(0xea0d0004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].877 918 1064 E MtkOmxVdecEx: [0xea0d0000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].877 918 1064 E OMXNodeInstance:
setConfig(0xea0d0004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].877 918 1064 E OMXNodeInstance:
getParameter(0xea0d0004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].877 918 1064 E OMXNodeInstance:
getConfig(0xea0d0004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].878 918 1064 E OMXNodeInstance:
getConfig(0xea0d0004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].969 918 27848 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27848
05-19 [Link].970 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25817 hint:-1
pid:918 duration:0 => ret_hdl:25817
05-19 [Link].970 479 1594 I libPowerHal: [PE] scn:2 hdl:25817
lock_user:[email protected] pid:918 tid:27848 dur:0
05-19 [Link].971 918 27848 I mtkpower_client: ret_hdl:25817
05-19 [Link].992 918 27887 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f43810
05-19 [Link].992 918 27887 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].992 918 27887 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].993 918 27887 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].993 918 27887 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17799
05-19 [Link].993 918 27887 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1d5e000
05-19 [Link].993 918 27887 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].996 918 27895 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27895
05-19 [Link].000 918 27895 I mtkpower_client: ret_hdl:25818
05-19 [Link].000 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25818 hint:-1
pid:918 duration:0 => ret_hdl:25818
05-19 [Link].000 479 1594 I libPowerHal: [PE] scn:3 hdl:25818
lock_user:[email protected] pid:918 tid:27895 dur:0
05-19 [Link].019 918 27887 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].019 918 27887 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].019 918 27887 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].019 918 27887 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].019 918 27887 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].152 918 27841 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].174 918 27841 I mtkpower_client: perf_lock_rel, hdl:25817,
tid:27841
05-19 [Link].174 918 27841 I mtkpower_client: perf_lock_rel, hdl:25810,
tid:27841
05-19 [Link].174 918 27841 I mtkpower_client: perf_lock_rel, hdl:25806,
tid:27841
05-19 [Link].175 479 1594 I libPowerHal: [PD] scn:2 hdl:25817
lock_user:[email protected] pid:918 tid:27848 dur:0
05-19 [Link].177 479 1594 I libPowerHal: [PD] scn:0 hdl:25810
lock_user:[email protected] pid:918 tid:27848 dur:0
05-19 [Link].243 918 27894 I mtkpower_client: perf_lock_rel, hdl:25818,
tid:27894
05-19 [Link].243 918 27894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27894
05-19 [Link].243 479 1594 I libPowerHal: [PD] scn:3 hdl:25818
lock_user:[email protected] pid:918 tid:27895 dur:0
05-19 [Link].245 918 27894 I mtkpower_client: ret_hdl:25819
05-19 [Link].245 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25819 hint:-1
pid:918 duration:0 => ret_hdl:25819
05-19 [Link].245 479 1594 I libPowerHal: [PE] scn:0 hdl:25819
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].245 918 27894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27894
05-19 [Link].246 918 27894 I mtkpower_client: ret_hdl:25820
05-19 [Link].246 918 27894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27894
05-19 [Link].246 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25820 hint:-1
pid:918 duration:0 => ret_hdl:25820
05-19 [Link].246 479 1594 I libPowerHal: [PE] scn:2 hdl:25820
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].248 918 27894 I mtkpower_client: ret_hdl:25821
05-19 [Link].248 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25821 hint:-1
pid:918 duration:0 => ret_hdl:25821
05-19 [Link].248 479 1594 I libPowerHal: [PE] scn:3 hdl:25821
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].420 918 27894 I mtkpower_client: perf_lock_rel, hdl:25821,
tid:27894
05-19 [Link].421 479 1594 I libPowerHal: [PD] scn:3 hdl:25821
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].759 918 27894 I mtkpower_client: perf_lock_rel, hdl:25820,
tid:27894
05-19 [Link].760 479 1594 I libPowerHal: [PD] scn:2 hdl:25820
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].846 479 1594 I libPowerHal: [perfScnDumpAll] scn:0 hdl:25819
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].981 918 6021 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].982 918 1085 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].985 918 9097 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].985 918 9097 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].986 918 9097 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].986 918 11717 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].987 918 1085 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].038 918 27933 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].038 918 27933 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].038 918 27933 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].041 918 27933 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].041 918 27933 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 11390
05-19 [Link].041 918 27933 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe29f5000
05-19 [Link].041 918 27933 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].045 918 27938 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27938
05-19 [Link].047 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25825 hint:-1
pid:918 duration:0 => ret_hdl:25825
05-19 [Link].048 479 1594 I libPowerHal: [PE] scn:2 hdl:25825
lock_user:[email protected] pid:918 tid:27938 dur:0
05-19 [Link].049 918 27938 I mtkpower_client: ret_hdl:25825
05-19 [Link].081 918 27933 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].081 918 27933 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].081 918 27933 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].081 918 27933 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].081 918 27933 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].228 918 27932 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].238 918 27932 I mtkpower_client: perf_lock_rel, hdl:25825,
tid:27932
05-19 [Link].239 479 1594 I libPowerHal: [PD] scn:2 hdl:25825
lock_user:[email protected] pid:918 tid:27938 dur:0
05-19 [Link].335 918 11717 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].335 918 11717 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 1064 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].337 918 1064 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 1721 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].338 918 1721 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].338 918 11677 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].377 918 27980 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].377 918 27980 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].377 918 27980 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].378 918 27980 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].378 918 27980 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 22341
05-19 [Link].378 918 27980 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe29f5000
05-19 [Link].378 918 27980 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].380 918 27985 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27985
05-19 [Link].381 918 27985 I mtkpower_client: ret_hdl:25827
05-19 [Link].383 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25827 hint:-1
pid:918 duration:0 => ret_hdl:25827
05-19 [Link].383 479 1594 I libPowerHal: [PE] scn:1 hdl:25827
lock_user:[email protected] pid:918 tid:27985 dur:0
05-19 [Link].407 918 27980 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].407 918 27980 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].407 918 27980 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].407 918 27980 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].407 918 27980 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].420 918 27894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27894
05-19 [Link].423 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25828 hint:-1
pid:918 duration:0 => ret_hdl:25828
05-19 [Link].423 479 1594 I libPowerHal: [PE] scn:2 hdl:25828
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].424 918 27894 I mtkpower_client: ret_hdl:25828
05-19 [Link].424 918 27894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27894
05-19 [Link].425 918 27894 I mtkpower_client: ret_hdl:25829
05-19 [Link].425 918 27894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27894
05-19 [Link].426 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25829 hint:-1
pid:918 duration:0 => ret_hdl:25829
05-19 [Link].426 479 1594 I libPowerHal: [PE] scn:3 hdl:25829
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].427 918 27894 I mtkpower_client: ret_hdl:25830
05-19 [Link].435 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25830 hint:-1
pid:918 duration:0 => ret_hdl:25830
05-19 [Link].435 479 1594 I libPowerHal: [PE] scn:4 hdl:25830
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].439 918 27886 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].454 918 27886 I mtkpower_client: perf_lock_rel, hdl:25830,
tid:27886
05-19 [Link].454 918 27886 I mtkpower_client: perf_lock_rel, hdl:25829,
tid:27886
05-19 [Link].454 918 27886 I mtkpower_client: perf_lock_rel, hdl:25828,
tid:27886
05-19 [Link].454 918 27886 I mtkpower_client: perf_lock_rel, hdl:25819,
tid:27886
05-19 [Link].454 918 27886 I mtkpower_client: perf_lock_rel, hdl:25818,
tid:27886
05-19 [Link].455 479 1594 I libPowerHal: [PD] scn:4 hdl:25830
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].456 479 1594 I libPowerHal: [PD] scn:3 hdl:25829
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].457 479 1594 I libPowerHal: [PD] scn:2 hdl:25828
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].458 479 1594 I libPowerHal: [PD] scn:0 hdl:25819
lock_user:[email protected] pid:918 tid:27894 dur:0
05-19 [Link].660 918 27984 I mtkpower_client: perf_lock_rel, hdl:25827,
tid:27984
05-19 [Link].660 918 27984 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27984
05-19 [Link].661 479 1594 I libPowerHal: [PD] scn:1 hdl:25827
lock_user:[email protected] pid:918 tid:27985 dur:0
05-19 [Link].662 918 27984 I mtkpower_client: ret_hdl:25831
05-19 [Link].662 918 27984 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:27984
05-19 [Link].662 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25831 hint:-1
pid:918 duration:0 => ret_hdl:25831
05-19 [Link].662 479 1594 I libPowerHal: [PE] scn:0 hdl:25831
lock_user:[email protected] pid:918 tid:27984 dur:0
05-19 [Link].663 918 27984 I mtkpower_client: ret_hdl:25832
05-19 [Link].663 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25832 hint:-1
pid:918 duration:0 => ret_hdl:25832
05-19 [Link].663 479 1594 I libPowerHal: [PE] scn:1 hdl:25832
lock_user:[email protected] pid:918 tid:27984 dur:0
05-19 [Link].722 918 27984 I mtkpower_client: perf_lock_rel, hdl:25832,
tid:27984
05-19 [Link].723 479 1594 I libPowerHal: [PD] scn:1 hdl:25832
lock_user:[email protected] pid:918 tid:27984 dur:0
05-19 [Link].011 918 1064 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].011 918 1064 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].014 918 1959 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].015 918 1959 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].017 918 1959 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].018 918 1959 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].019 918 1959 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].124 918 28025 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f43810
05-19 [Link].124 918 28025 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].124 918 28025 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].125 918 28025 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].125 918 28025 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17799
05-19 [Link].125 918 28025 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1d8d000
05-19 [Link].125 918 28025 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].131 918 28031 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28031
05-19 [Link].131 918 28031 I mtkpower_client: ret_hdl:25838
05-19 [Link].133 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25838 hint:-1
pid:918 duration:0 => ret_hdl:25838
05-19 [Link].133 479 1594 I libPowerHal: [PE] scn:2 hdl:25838
lock_user:[email protected] pid:918 tid:28031 dur:0
05-19 [Link].156 918 27977 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].165 918 28025 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].165 918 28025 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].165 918 28025 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].165 918 28025 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].165 918 28025 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].179 918 27977 I mtkpower_client: perf_lock_rel, hdl:25832,
tid:27977
05-19 [Link].181 918 27977 I mtkpower_client: perf_lock_rel, hdl:25831,
tid:27977
05-19 [Link].183 479 1594 I libPowerHal: [PD] scn:0 hdl:25831
lock_user:[email protected] pid:918 tid:27984 dur:0
05-19 [Link].184 918 27977 I mtkpower_client: perf_lock_rel, hdl:25827,
tid:27977
05-19 [Link].378 918 28030 I mtkpower_client: perf_lock_rel, hdl:25838,
tid:28030
05-19 [Link].378 918 28030 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28030
05-19 [Link].379 479 1594 I libPowerHal: [PD] scn:2 hdl:25838
lock_user:[email protected] pid:918 tid:28031 dur:0
05-19 [Link].381 918 28030 I mtkpower_client: ret_hdl:25839
05-19 [Link].381 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25839 hint:-1
pid:918 duration:0 => ret_hdl:25839
05-19 [Link].381 479 1594 I libPowerHal: [PE] scn:0 hdl:25839
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].802 918 28030 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28030
05-19 [Link].803 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25840 hint:-1
pid:918 duration:0 => ret_hdl:25840
05-19 [Link].803 479 1594 I libPowerHal: [PE] scn:2 hdl:25840
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].805 918 28030 I mtkpower_client: ret_hdl:25840
05-19 [Link].033 918 28030 I mtkpower_client: perf_lock_rel, hdl:25840,
tid:28030
05-19 [Link].036 479 1594 I libPowerHal: [PD] scn:2 hdl:25840
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].866 918 28030 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28030
05-19 [Link].868 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25841 hint:-1
pid:918 duration:0 => ret_hdl:25841
05-19 [Link].868 479 1594 I libPowerHal: [PE] scn:1 hdl:25841
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].871 918 28030 I mtkpower_client: ret_hdl:25841
05-19 [Link].977 918 28030 I mtkpower_client: perf_lock_rel, hdl:25841,
tid:28030
05-19 [Link].979 479 1594 I libPowerHal: [PD] scn:1 hdl:25841
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].461 918 28030 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28030
05-19 [Link].464 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25843 hint:-1
pid:918 duration:0 => ret_hdl:25843
05-19 [Link].464 479 1594 I libPowerHal: [PE] scn:1 hdl:25843
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].464 918 28030 I mtkpower_client: ret_hdl:25843
05-19 [Link].706 918 28030 I mtkpower_client: perf_lock_rel, hdl:25843,
tid:28030
05-19 [Link].708 479 1594 I libPowerHal: [PD] scn:1 hdl:25843
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].020 918 28024 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].059 918 28024 I mtkpower_client: perf_lock_rel, hdl:25843,
tid:28024
05-19 [Link].062 918 28024 I mtkpower_client: perf_lock_rel, hdl:25839,
tid:28024
05-19 [Link].063 479 1594 I libPowerHal: [PD] scn:0 hdl:25839
lock_user:[email protected] pid:918 tid:28030 dur:0
05-19 [Link].064 918 28024 I mtkpower_client: perf_lock_rel, hdl:25838,
tid:28024
05-19 [Link].065 918 28024 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].066 918 28024 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].066 918 28024 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].066 918 28024 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].537 918 9097 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].537 918 9097 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].541 918 9097 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].541 918 9097 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].542 918 9097 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].542 918 9097 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].542 918 9097 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].588 918 28099 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].588 918 28099 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].589 918 28099 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].589 918 28099 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].589 918 28099 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].593 918 28099 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].593 918 28099 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].593 918 28099 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].597 918 28099 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].597 918 28099 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 11390
05-19 [Link].597 918 28099 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].597 918 28099 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].599 918 28105 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28105
05-19 [Link].601 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25855 hint:-1
pid:918 duration:0 => ret_hdl:25855
05-19 [Link].601 479 1594 I libPowerHal: [PE] scn:0 hdl:25855
lock_user:[email protected] pid:918 tid:28105 dur:0
05-19 [Link].603 918 28105 I mtkpower_client: ret_hdl:25855
05-19 [Link].611 918 28099 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].611 918 28099 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].611 918 28099 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].611 918 28099 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].611 918 28099 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].811 918 28104 I mtkpower_client: perf_lock_rel, hdl:25855,
tid:28104
05-19 [Link].811 918 28104 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28104
05-19 [Link].812 479 1594 I libPowerHal: [PD] scn:0 hdl:25855
lock_user:[email protected] pid:918 tid:28105 dur:0
05-19 [Link].813 918 28104 I mtkpower_client: ret_hdl:25856
05-19 [Link].814 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25856 hint:-1
pid:918 duration:0 => ret_hdl:25856
05-19 [Link].814 479 1594 I libPowerHal: [PE] scn:1 hdl:25856
lock_user:[email protected] pid:918 tid:28104 dur:0
05-19 [Link].814 918 11677 E OMXNodeInstance:
setParameter(0xea2be804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].814 918 11677 E OMXNodeInstance:
getParameter(0xea2be804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].820 918 11677 E MtkOmxVdecEx: [0xea2be800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].820 918 11677 E OMXNodeInstance:
setConfig(0xea2be804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].820 918 11677 E OMXNodeInstance:
getParameter(0xea2be804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].821 918 11677 E OMXNodeInstance:
getConfig(0xea2be804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].822 918 11677 E OMXNodeInstance:
getConfig(0xea2be804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].840 918 28104 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28104
05-19 [Link].841 918 28104 I mtkpower_client: ret_hdl:25862
05-19 [Link].841 918 28104 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28104
05-19 [Link].841 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25862 hint:-1
pid:918 duration:0 => ret_hdl:25862
05-19 [Link].841 479 1594 I libPowerHal: [PE] scn:2 hdl:25862
lock_user:[email protected] pid:918 tid:28104 dur:0
05-19 [Link].844 918 28104 I mtkpower_client: ret_hdl:25863
05-19 [Link].844 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25863 hint:-1
pid:918 duration:0 => ret_hdl:25863
05-19 [Link].844 479 1594 I libPowerHal: [PE] scn:3 hdl:25863
lock_user:[email protected] pid:918 tid:28104 dur:0
05-19 [Link].971 918 28143 E VDO_LOG : GetDecoderAPI hWrapper 0xe9dbb810
05-19 [Link].971 918 28143 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].971 918 28143 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].972 918 28143 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].972 918 28143 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 63560
05-19 [Link].972 918 28143 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xddd56000
05-19 [Link].972 918 28143 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].977 918 28149 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28149
05-19 [Link].984 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25864 hint:-1
pid:918 duration:0 => ret_hdl:25864
05-19 [Link].984 479 1594 I libPowerHal: [PE] scn:4 hdl:25864
lock_user:[email protected] pid:918 tid:28149 dur:0
05-19 [Link].985 918 28149 I mtkpower_client: ret_hdl:25864
05-19 [Link].010 918 28143 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].010 918 28143 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].010 918 28143 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].010 918 28143 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].010 918 28143 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].103 918 28098 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].117 918 28098 I mtkpower_client: perf_lock_rel, hdl:25863,
tid:28098
05-19 [Link].118 918 28098 I mtkpower_client: perf_lock_rel, hdl:25862,
tid:28098
05-19 [Link].118 479 1594 I libPowerHal: [PD] scn:3 hdl:25863
lock_user:[email protected] pid:918 tid:28104 dur:0
05-19 [Link].119 918 28098 I mtkpower_client: perf_lock_rel, hdl:25856,
tid:28098
05-19 [Link].119 918 28098 I mtkpower_client: perf_lock_rel, hdl:25855,
tid:28098
05-19 [Link].120 479 1594 I libPowerHal: [PD] scn:2 hdl:25862
lock_user:[email protected] pid:918 tid:28104 dur:0
05-19 [Link].121 479 1594 I libPowerHal: [PD] scn:1 hdl:25856
lock_user:[email protected] pid:918 tid:28104 dur:0
05-19 [Link].302 918 28148 I mtkpower_client: perf_lock_rel, hdl:25864,
tid:28148
05-19 [Link].302 918 28148 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28148
05-19 [Link].303 479 1594 I libPowerHal: [PD] scn:4 hdl:25864
lock_user:[email protected] pid:918 tid:28149 dur:0
05-19 [Link].304 918 28148 I mtkpower_client: ret_hdl:25865
05-19 [Link].304 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25865 hint:-1
pid:918 duration:0 => ret_hdl:25865
05-19 [Link].304 479 1594 I libPowerHal: [PE] scn:1 hdl:25865
lock_user:[email protected] pid:918 tid:28148 dur:0
05-19 [Link].621 918 28148 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28148
05-19 [Link].621 918 28148 I mtkpower_client: ret_hdl:25866
05-19 [Link].622 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25866 hint:-1
pid:918 duration:0 => ret_hdl:25866
05-19 [Link].622 479 1594 I libPowerHal: [PE] scn:0 hdl:25866
lock_user:[email protected] pid:918 tid:28148 dur:0
05-19 [Link].694 918 28148 I mtkpower_client: perf_lock_rel, hdl:25866,
tid:28148
05-19 [Link].695 479 1594 I libPowerHal: [PD] scn:0 hdl:25866
lock_user:[email protected] pid:918 tid:28148 dur:0
05-19 [Link].938 918 11716 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].939 918 1780 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].945 918 1085 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].945 918 1085 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].946 918 1780 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].947 918 1064 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].948 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].012 918 28188 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].013 918 28188 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].013 918 28188 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].013 918 28188 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].014 918 28188 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 11390
05-19 [Link].014 918 28188 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].014 918 28188 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].017 918 28194 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28194
05-19 [Link].017 918 28194 I mtkpower_client: ret_hdl:25872
05-19 [Link].018 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25872 hint:-1
pid:918 duration:0 => ret_hdl:25872
05-19 [Link].018 479 1594 I libPowerHal: [PE] scn:2 hdl:25872
lock_user:[email protected] pid:918 tid:28194 dur:0
05-19 [Link].045 918 28188 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].045 918 28188 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].045 918 28188 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].045 918 28188 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].045 918 28188 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].080 918 28187 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].090 918 28187 I mtkpower_client: perf_lock_rel, hdl:25872,
tid:28187
05-19 [Link].093 479 1594 I libPowerHal: [PD] scn:2 hdl:25872
lock_user:[email protected] pid:918 tid:28194 dur:0
05-19 [Link].138 918 28148 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28148
05-19 [Link].139 918 28148 I mtkpower_client: ret_hdl:25873
05-19 [Link].139 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25873 hint:-1
pid:918 duration:0 => ret_hdl:25873
05-19 [Link].139 479 1594 I libPowerHal: [PE] scn:2 hdl:25873
lock_user:[email protected] pid:918 tid:28148 dur:0
05-19 [Link].231 918 28148 I mtkpower_client: perf_lock_rel, hdl:25873,
tid:28148
05-19 [Link].232 479 1594 I libPowerHal: [PD] scn:2 hdl:25873
lock_user:[email protected] pid:918 tid:28148 dur:0
05-19 [Link].477 918 1780 E OMXNodeInstance:
setParameter(0xea487804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].479 918 1780 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].484 918 11716 E MtkOmxVdecEx: [0xea487800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].484 918 11716 E OMXNodeInstance:
setConfig(0xea487804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 11716 E OMXNodeInstance:
getParameter(0xea487804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 1064 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].486 918 1784 E OMXNodeInstance:
getConfig(0xea487804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].530 918 28234 E VDO_LOG : GetDecoderAPI hWrapper 0xea287810
05-19 [Link].531 918 28234 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].531 918 28234 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].532 918 28234 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].533 918 28234 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 11390
05-19 [Link].533 918 28234 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].533 918 28234 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].535 918 28240 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28240
05-19 [Link].537 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25878 hint:-1
pid:918 duration:0 => ret_hdl:25878
05-19 [Link].537 479 1594 I libPowerHal: [PE] scn:0 hdl:25878
lock_user:[email protected] pid:918 tid:28240 dur:0
05-19 [Link].538 918 28240 I mtkpower_client: ret_hdl:25878
05-19 [Link].554 918 28234 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].554 918 28234 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].554 918 28234 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].554 918 28234 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].554 918 28234 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].692 918 28142 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].711 918 28142 I mtkpower_client: perf_lock_rel, hdl:25873,
tid:28142
05-19 [Link].711 918 28142 I mtkpower_client: perf_lock_rel, hdl:25865,
tid:28142
05-19 [Link].712 918 28142 I mtkpower_client: perf_lock_rel, hdl:25864,
tid:28142
05-19 [Link].713 479 1594 I libPowerHal: [PD] scn:1 hdl:25865
lock_user:[email protected] pid:918 tid:28148 dur:0
05-19 [Link].834 918 28239 I mtkpower_client: perf_lock_rel, hdl:25878,
tid:28239
05-19 [Link].835 918 28239 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28239
05-19 [Link].837 479 1594 I libPowerHal: [PD] scn:0 hdl:25878
lock_user:[email protected] pid:918 tid:28240 dur:0
05-19 [Link].840 918 28239 I mtkpower_client: ret_hdl:25879
05-19 [Link].840 918 28239 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28239
05-19 [Link].841 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25879 hint:-1
pid:918 duration:0 => ret_hdl:25879
05-19 [Link].841 479 1594 I libPowerHal: [PE] scn:0 hdl:25879
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].843 918 28239 I mtkpower_client: ret_hdl:25880
05-19 [Link].846 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25880 hint:-1
pid:918 duration:0 => ret_hdl:25880
05-19 [Link].846 479 1594 I libPowerHal: [PE] scn:1 hdl:25880
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].897 918 28239 I mtkpower_client: perf_lock_rel, hdl:25880,
tid:28239
05-19 [Link].898 479 1594 I libPowerHal: [PD] scn:1 hdl:25880
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].325 918 15680 E OMXNodeInstance:
setParameter(0xea2be804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].326 918 15680 E OMXNodeInstance:
getParameter(0xea2be804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].328 918 1780 E MtkOmxVdecEx: [0xea2be800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].328 918 1780 E OMXNodeInstance:
setConfig(0xea2be804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].333 918 1780 E OMXNodeInstance:
getParameter(0xea2be804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].333 918 1780 E OMXNodeInstance:
getConfig(0xea2be804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].334 918 1780 E OMXNodeInstance:
getConfig(0xea2be804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].375 918 28278 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].376 918 28278 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].376 918 28278 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].378 918 28278 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].379 918 28278 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 63560
05-19 [Link].380 918 28278 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde4d5000
05-19 [Link].380 918 28278 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].383 918 28283 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28283
05-19 [Link].384 918 28283 I mtkpower_client: ret_hdl:25884
05-19 [Link].385 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25884 hint:-1
pid:918 duration:0 => ret_hdl:25884
05-19 [Link].385 479 1594 I libPowerHal: [PE] scn:2 hdl:25884
lock_user:[email protected] pid:918 tid:28283 dur:0
05-19 [Link].419 918 28278 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].419 918 28278 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].420 918 28278 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].420 918 28278 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].420 918 28278 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].633 918 28239 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28239
05-19 [Link].634 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25885 hint:-1
pid:918 duration:0 => ret_hdl:25885
05-19 [Link].634 918 28239 I mtkpower_client: ret_hdl:25885
05-19 [Link].634 479 1594 I libPowerHal: [PE] scn:4 hdl:25885
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].634 918 28239 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28239
05-19 [Link].637 918 28239 I mtkpower_client: ret_hdl:25886
05-19 [Link].638 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25886 hint:-1
pid:918 duration:0 => ret_hdl:25886
05-19 [Link].638 479 1594 I libPowerHal: [PE] scn:5 hdl:25886
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].814 918 28239 I mtkpower_client: perf_lock_rel, hdl:25886,
tid:28239
05-19 [Link].815 479 1594 I libPowerHal: [PD] scn:5 hdl:25886
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].919 918 28239 I mtkpower_client: perf_lock_rel, hdl:25885,
tid:28239
05-19 [Link].920 479 1594 I libPowerHal: [PD] scn:4 hdl:25885
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].379 918 28233 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].417 918 28233 I mtkpower_client: perf_lock_rel, hdl:25886,
tid:28233
05-19 [Link].417 918 28233 I mtkpower_client: perf_lock_rel, hdl:25885,
tid:28233
05-19 [Link].418 918 28233 I mtkpower_client: perf_lock_rel, hdl:25879,
tid:28233
05-19 [Link].418 918 28233 I mtkpower_client: perf_lock_rel, hdl:25878,
tid:28233
05-19 [Link].420 479 1594 I libPowerHal: [PD] scn:0 hdl:25879
lock_user:[email protected] pid:918 tid:28239 dur:0
05-19 [Link].471 918 28282 I mtkpower_client: perf_lock_rel, hdl:25884,
tid:28282
05-19 [Link].471 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].472 479 1594 I libPowerHal: [PD] scn:2 hdl:25884
lock_user:[email protected] pid:918 tid:28283 dur:0
05-19 [Link].473 918 28282 I mtkpower_client: ret_hdl:25889
05-19 [Link].473 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25889 hint:-1
pid:918 duration:0 => ret_hdl:25889
05-19 [Link].473 479 1594 I libPowerHal: [PE] scn:0 hdl:25889
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].785 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].789 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25891 hint:-1
pid:918 duration:0 => ret_hdl:25891
05-19 [Link].789 479 1594 I libPowerHal: [PE] scn:1 hdl:25891
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].789 918 28282 I mtkpower_client: ret_hdl:25891
05-19 [Link].789 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].792 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25892 hint:-1
pid:918 duration:0 => ret_hdl:25892
05-19 [Link].792 479 1594 I libPowerHal: [PE] scn:2 hdl:25892
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].793 918 28282 I mtkpower_client: ret_hdl:25892
05-19 [Link].793 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].794 918 28282 I mtkpower_client: ret_hdl:25893
05-19 [Link].794 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].795 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25893 hint:-1
pid:918 duration:0 => ret_hdl:25893
05-19 [Link].795 479 1594 I libPowerHal: [PE] scn:3 hdl:25893
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].796 918 28282 I mtkpower_client: ret_hdl:25894
05-19 [Link].797 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25894 hint:-1
pid:918 duration:0 => ret_hdl:25894
05-19 [Link].797 479 1594 I libPowerHal: [PE] scn:4 hdl:25894
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].866 918 28282 I mtkpower_client: perf_lock_rel, hdl:25894,
tid:28282
05-19 [Link].867 479 1594 I libPowerHal: [PD] scn:4 hdl:25894
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].019 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].020 918 28282 I mtkpower_client: ret_hdl:25895
05-19 [Link].020 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25895 hint:-1
pid:918 duration:0 => ret_hdl:25895
05-19 [Link].020 479 1594 I libPowerHal: [PE] scn:4 hdl:25895
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].119 918 28282 I mtkpower_client: perf_lock_rel, hdl:25895,
tid:28282
05-19 [Link].120 479 1594 I libPowerHal: [PD] scn:4 hdl:25895
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].214 918 28282 I mtkpower_client: perf_lock_rel, hdl:25893,
tid:28282
05-19 [Link].215 479 1594 I libPowerHal: [PD] scn:3 hdl:25893
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].441 918 28282 I mtkpower_client: perf_lock_rel, hdl:25892,
tid:28282
05-19 [Link].442 479 1594 I libPowerHal: [PD] scn:2 hdl:25892
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].637 918 28282 I mtkpower_client: perf_lock_rel, hdl:25891,
tid:28282
05-19 [Link].638 479 1594 I libPowerHal: [PD] scn:1 hdl:25891
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].985 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].986 918 28282 I mtkpower_client: ret_hdl:25897
05-19 [Link].987 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25897 hint:-1
pid:918 duration:0 => ret_hdl:25897
05-19 [Link].987 479 1594 I libPowerHal: [PE] scn:1 hdl:25897
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].242 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].244 918 28282 I mtkpower_client: ret_hdl:25898
05-19 [Link].244 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25898 hint:-1
pid:918 duration:0 => ret_hdl:25898
05-19 [Link].244 479 1594 I libPowerHal: [PE] scn:2 hdl:25898
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].382 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].382 918 28282 I mtkpower_client: ret_hdl:25899
05-19 [Link].383 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25899 hint:-1
pid:918 duration:0 => ret_hdl:25899
05-19 [Link].383 479 1594 I libPowerHal: [PE] scn:3 hdl:25899
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].473 918 28282 I mtkpower_client: perf_lock_rel, hdl:25899,
tid:28282
05-19 [Link].474 479 1594 I libPowerHal: [PD] scn:3 hdl:25899
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].565 918 28282 I mtkpower_client: perf_lock_rel, hdl:25898,
tid:28282
05-19 [Link].566 479 1594 I libPowerHal: [PD] scn:2 hdl:25898
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].911 918 28282 I mtkpower_client: perf_lock_rel, hdl:25897,
tid:28282
05-19 [Link].913 479 1594 I libPowerHal: [PD] scn:1 hdl:25897
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].049 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].050 918 28282 I mtkpower_client: ret_hdl:25900
05-19 [Link].050 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25900 hint:-1
pid:918 duration:0 => ret_hdl:25900
05-19 [Link].050 479 1594 I libPowerHal: [PE] scn:1 hdl:25900
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].472 918 28282 I mtkpower_client: perf_lock_rel, hdl:25900,
tid:28282
05-19 [Link].474 479 1594 I libPowerHal: [PD] scn:1 hdl:25900
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].825 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].826 918 28282 I mtkpower_client: ret_hdl:25901
05-19 [Link].826 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25901 hint:-1
pid:918 duration:0 => ret_hdl:25901
05-19 [Link].826 479 1594 I libPowerHal: [PE] scn:1 hdl:25901
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].176 918 28282 I mtkpower_client: perf_lock_rel, hdl:25901,
tid:28282
05-19 [Link].177 479 1594 I libPowerHal: [PD] scn:1 hdl:25901
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].499 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].501 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25902 hint:-1
pid:918 duration:0 => ret_hdl:25902
05-19 [Link].501 479 1594 I libPowerHal: [PE] scn:1 hdl:25902
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].501 918 28282 I mtkpower_client: ret_hdl:25902
05-19 [Link].501 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].503 918 28282 I mtkpower_client: ret_hdl:25903
05-19 [Link].503 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].504 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25903 hint:-1
pid:918 duration:0 => ret_hdl:25903
05-19 [Link].504 479 1594 I libPowerHal: [PE] scn:2 hdl:25903
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].512 918 28282 I mtkpower_client: ret_hdl:25904
05-19 [Link].512 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25904 hint:-1
pid:918 duration:0 => ret_hdl:25904
05-19 [Link].513 479 1594 I libPowerHal: [PE] scn:3 hdl:25904
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].567 918 28282 I mtkpower_client: perf_lock_rel, hdl:25904,
tid:28282
05-19 [Link].568 479 1594 I libPowerHal: [PD] scn:3 hdl:25904
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].782 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].783 918 28282 I mtkpower_client: ret_hdl:25905
05-19 [Link].783 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].784 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25905 hint:-1
pid:918 duration:0 => ret_hdl:25905
05-19 [Link].784 479 1594 I libPowerHal: [PE] scn:3 hdl:25905
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].786 918 28282 I mtkpower_client: ret_hdl:25906
05-19 [Link].786 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25906 hint:-1
pid:918 duration:0 => ret_hdl:25906
05-19 [Link].786 479 1594 I libPowerHal: [PE] scn:4 hdl:25906
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].880 918 28282 I mtkpower_client: perf_lock_rel, hdl:25906,
tid:28282
05-19 [Link].883 479 1594 I libPowerHal: [PD] scn:4 hdl:25906
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].960 918 28282 I mtkpower_client: perf_lock_rel, hdl:25905,
tid:28282
05-19 [Link].961 479 1594 I libPowerHal: [PD] scn:3 hdl:25905
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].092 918 1780 E MtkOmxVenc: [0xea487800] bufk = 0
05-19 [Link].099 918 15680 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].099 918 15680 E MtkOmxVenc: [0xea487800]
OMX_GoogleAndroidIndexAllocateAndroidNativeHandle: does not support input port
05-19 [Link].099 918 15680 E OMXNodeInstance:
setParameter(0xea487804:[Link],
[Link](0x7f20040e): Input:0 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].100 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].100 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].101 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].101 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link].useAndroidNativeBuffer2
05-19 [Link].101 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].101 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].101 918 1784 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].101 918 1784 E OMXNodeInstance:
getParameter(0xea487804:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].103 918 15680 E OMXNodeInstance:
getParameter(0xea487804:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].104 918 15680 E MtkOmxVenc: [0xea487800] setprop setValue to 300
05-19 [Link].109 918 15680 E MtkOmxVenc: [0xea487800]
MtkOmxVenc::GetExtensionIndex Unknown parameter name:
[Link]
05-19 [Link].110 918 15680 E OMXNodeInstance:
getParameter(0xea487804:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].110 918 15680 E MtkOmxVenc: [0xea487800] MtkOmxVenc::GetConfig
unsupported nConfigIndex(0x6F800005)
05-19 [Link].110 918 15680 E OMXNodeInstance:
getConfig(0xea487804:[Link], ConfigLatency(0x6f800005)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].110 918 15680 E MtkOmxVenc: [0xea487800] MtkOmxVenc::GetConfig
unsupported nConfigIndex(0x6F100004)
05-19 [Link].110 918 15680 E OMXNodeInstance:
getConfig(0xea487804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].144 918 1780 E MtkOmxVenc: [0xea487800] MtkOmxVenc::GetParameter
unsupported nParamIndex(0x6F800004)
05-19 [Link].144 918 1780 E OMXNodeInstance:
getParameter(0xea487804:[Link], ParamConsumerUsageBits(0x6f800004)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].145 918 15680 E MtkOmxVenc: [0xea487800] MtkOmxVenc::GetParameter
unsupported nParamIndex(0x6F800004)
05-19 [Link].145 918 15680 E OMXNodeInstance:
getParameter(0xea487804:[Link], ParamConsumerUsageBits(0x6f800004)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].196 918 28282 I mtkpower_client: perf_lock_rel, hdl:25903,
tid:28282
05-19 [Link].197 479 1594 I libPowerHal: [PD] scn:2 hdl:25903
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].819 918 15680 E OMXNodeInstance:
setParameter(0xea480004:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].820 918 1784 E OMXNodeInstance:
getParameter(0xea480004:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].825 918 1784 E OMXNodeInstance:
getConfig(0xea480004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 6021 E OMXNodeInstance:
getConfig(0xea480004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].947 918 28337 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].231 918 28329 E MtkOmxVenc: [0xea487800] CheckGrallocWStride: 736
05-19 [Link].240 918 28329 E VDO_LOG : [eHalEMICtrlForRecordSize]
VideoRecordSize_Set(BWC_SIZE(720, 1280))
05-19 [Link].241 918 28329 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].242 918 28329 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].242 918 28329 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].243 918 28329 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].244 918 28329 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].244 918 28329 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].292 918 1959 E OMXNodeInstance:
setParameter(0xea0d0004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].293 918 1959 E OMXNodeInstance:
getParameter(0xea0d0004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].298 918 1064 E MtkOmxVdecEx: [0xea0d0000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].298 918 1064 E OMXNodeInstance:
setConfig(0xea0d0004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].299 918 15680 E OMXNodeInstance:
getParameter(0xea0d0004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].299 918 9097 E OMXNodeInstance:
getConfig(0xea0d0004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].300 918 15680 E OMXNodeInstance:
getConfig(0xea0d0004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].347 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].350 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25912 hint:-1
pid:918 duration:0 => ret_hdl:25912
05-19 [Link].350 479 1594 I libPowerHal: [PE] scn:3 hdl:25912
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].352 918 28282 I mtkpower_client: ret_hdl:25912
05-19 [Link].352 918 28282 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28282
05-19 [Link].353 918 28282 I mtkpower_client: ret_hdl:25913
05-19 [Link].353 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25913 hint:-1
pid:918 duration:0 => ret_hdl:25913
05-19 [Link].353 479 1594 I libPowerHal: [PE] scn:4 hdl:25913
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].397 918 28356 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c74810
05-19 [Link].397 918 28356 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].397 918 28356 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].397 918 28356 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].398 918 28356 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 73408
05-19 [Link].398 918 28356 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xd6aae000
05-19 [Link].398 918 28356 E VDO_LOG : vp9_dec_init() u4Width 640, u4Height
1152, Offset 0, Padding 0
05-19 [Link].402 918 28361 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28361
05-19 [Link].403 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25914 hint:-1
pid:918 duration:0 => ret_hdl:25914
05-19 [Link].403 479 1594 I libPowerHal: [PE] scn:5 hdl:25914
lock_user:[email protected] pid:918 tid:28361 dur:0
05-19 [Link].404 918 28361 I mtkpower_client: ret_hdl:25914
05-19 [Link].416 918 28356 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].416 918 28356 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].417 918 28356 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].417 918 28356 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].417 918 28356 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].603 918 28277 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].648 918 28277 I mtkpower_client: perf_lock_rel, hdl:25906,
tid:28277
05-19 [Link].649 918 28277 I mtkpower_client: perf_lock_rel, hdl:25913,
tid:28277
05-19 [Link].649 918 28277 I mtkpower_client: perf_lock_rel, hdl:25912,
tid:28277
05-19 [Link].649 918 28277 I mtkpower_client: perf_lock_rel, hdl:25902,
tid:28277
05-19 [Link].649 918 28277 I mtkpower_client: perf_lock_rel, hdl:25889,
tid:28277
05-19 [Link].649 918 28277 I mtkpower_client: perf_lock_rel, hdl:25884,
tid:28277
05-19 [Link].650 479 1594 I libPowerHal: [PD] scn:4 hdl:25913
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].651 479 1594 I libPowerHal: [PD] scn:3 hdl:25912
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].653 479 1594 I libPowerHal: [PD] scn:1 hdl:25902
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].654 479 1594 I libPowerHal: [PD] scn:0 hdl:25889
lock_user:[email protected] pid:918 tid:28282 dur:0
05-19 [Link].734 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25918
hint:1155 pid:501 duration:1784 => ret_hdl:25918
05-19 [Link].734 479 1594 I libPowerHal: [PE] scn:2 hdl:25918 hint:1155
comm:[email protected] pid:501
05-19 [Link].791 918 28360 I mtkpower_client: perf_lock_rel, hdl:25914,
tid:28360
05-19 [Link].791 918 28360 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28360
05-19 [Link].792 479 1594 I libPowerHal: [PD] scn:5 hdl:25914
lock_user:[email protected] pid:918 tid:28361 dur:0
05-19 [Link].792 918 28360 I mtkpower_client: ret_hdl:25920
05-19 [Link].793 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25920 hint:-1
pid:918 duration:0 => ret_hdl:25920
05-19 [Link].793 479 1594 I libPowerHal: [PE] scn:0 hdl:25920
lock_user:[email protected] pid:918 tid:28360 dur:0
05-19 [Link].883 918 6021 E OMXNodeInstance:
setParameter(0xea2be804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].884 918 9097 E OMXNodeInstance:
getParameter(0xea2be804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].890 918 1085 E MtkOmxVdecEx: [0xea2be800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].890 918 1085 E OMXNodeInstance:
setConfig(0xea2be804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].890 918 11677 E OMXNodeInstance:
getParameter(0xea2be804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].891 918 15680 E OMXNodeInstance:
getConfig(0xea2be804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].892 918 1064 E OMXNodeInstance:
getConfig(0xea2be804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].986 918 28401 E VDO_LOG : GetDecoderAPI hWrapper 0xe9dbb810
05-19 [Link].987 918 28401 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].988 918 28401 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].995 918 28401 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].995 918 28401 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 63560
05-19 [Link].995 918 28401 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde6ff000
05-19 [Link].995 918 28401 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].017 918 28407 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28407
05-19 [Link].018 918 28407 I mtkpower_client: ret_hdl:25921
05-19 [Link].018 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25921 hint:-1
pid:918 duration:0 => ret_hdl:25921
05-19 [Link].018 479 1594 I libPowerHal: [PE] scn:1 hdl:25921
lock_user:[email protected] pid:918 tid:28407 dur:0
05-19 [Link].054 918 28355 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].058 918 28401 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].059 918 28401 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].059 918 28401 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].059 918 28401 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].059 918 28401 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].079 918 28355 I mtkpower_client: perf_lock_rel, hdl:25920,
tid:28355
05-19 [Link].080 918 28355 I mtkpower_client: perf_lock_rel, hdl:25914,
tid:28355
05-19 [Link].081 479 1594 I libPowerHal: [PD] scn:0 hdl:25920
lock_user:[email protected] pid:918 tid:28360 dur:0
05-19 [Link].346 918 28406 I mtkpower_client: perf_lock_rel, hdl:25921,
tid:28406
05-19 [Link].346 918 28406 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28406
05-19 [Link].346 479 1594 I libPowerHal: [PD] scn:1 hdl:25921
lock_user:[email protected] pid:918 tid:28407 dur:0
05-19 [Link].348 918 28406 I mtkpower_client: ret_hdl:25922
05-19 [Link].349 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25922 hint:-1
pid:918 duration:0 => ret_hdl:25922
05-19 [Link].349 918 28406 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28406
05-19 [Link].350 479 1594 I libPowerHal: [PE] scn:0 hdl:25922
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].355 918 28406 I mtkpower_client: ret_hdl:25923
05-19 [Link].355 918 28406 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28406
05-19 [Link].355 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25923 hint:-1
pid:918 duration:0 => ret_hdl:25923
05-19 [Link].356 479 1594 I libPowerHal: [PE] scn:1 hdl:25923
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].363 918 28406 I mtkpower_client: ret_hdl:25924
05-19 [Link].363 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25924 hint:-1
pid:918 duration:0 => ret_hdl:25924
05-19 [Link].363 479 1594 I libPowerHal: [PE] scn:3 hdl:25924
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].663 918 28406 I mtkpower_client: perf_lock_rel, hdl:25924,
tid:28406
05-19 [Link].664 479 1594 I libPowerHal: [PD] scn:3 hdl:25924
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].826 918 28406 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28406
05-19 [Link].828 918 28406 I mtkpower_client: ret_hdl:25925
05-19 [Link].828 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25925 hint:-1
pid:918 duration:0 => ret_hdl:25925
05-19 [Link].828 479 1594 I libPowerHal: [PE] scn:3 hdl:25925
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].912 918 28406 I mtkpower_client: perf_lock_rel, hdl:25925,
tid:28406
05-19 [Link].913 479 1594 I libPowerHal: [PD] scn:3 hdl:25925
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].519 479 1594 I mtkpower@impl: [powerd_req]
TIMER_MSG_PERF_LOCK_TIMEOUT hdl:25918
05-19 [Link].519 479 1594 I libPowerHal: [perfLockRel] hdl:25918, idx:2
05-19 [Link].519 479 1594 I libPowerHal: [PD] scn:2 hdl:25918 hint:1155
comm:[email protected] pid:501
05-19 [Link].526 918 28406 I mtkpower_client: perf_lock_rel, hdl:25923,
tid:28406
05-19 [Link].528 479 1594 I libPowerHal: [PD] scn:1 hdl:25923
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].538 501 28389 I mtkpower_client: perf_lock_rel, hdl:25918,
tid:28389
05-19 [Link].540 479 1594 I libPowerHal: [perfLockRel] hdl:25918, idx:-1
05-19 [Link].632 501 501 I mtkpower_client: perf_lock_rel, hdl:25918, tid:501
05-19 [Link].633 479 1594 I libPowerHal: [perfLockRel] hdl:25918, idx:-1
05-19 [Link].809 918 1064 E OMXNodeInstance:
setParameter(0xea0d0004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].810 918 1064 E OMXNodeInstance:
getParameter(0xea0d0004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].820 918 1064 E MtkOmxVdecEx: [0xea0d0000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].820 918 1064 E OMXNodeInstance:
setConfig(0xea0d0004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].821 918 1064 E OMXNodeInstance:
getParameter(0xea0d0004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].822 918 1064 E OMXNodeInstance:
getConfig(0xea0d0004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].824 918 1780 E OMXNodeInstance:
getConfig(0xea0d0004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].894 918 28448 E VDO_LOG : GetDecoderAPI hWrapper 0xe9cc1810
05-19 [Link].894 918 28448 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].894 918 28448 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].897 918 28448 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].897 918 28448 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 73408
05-19 [Link].897 918 28448 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xd70eb000
05-19 [Link].897 918 28448 E VDO_LOG : vp9_dec_init() u4Width 640, u4Height
1152, Offset 0, Padding 0
05-19 [Link].912 918 28453 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28453
05-19 [Link].913 918 28453 I mtkpower_client: ret_hdl:25931
05-19 [Link].915 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25931 hint:-1
pid:918 duration:0 => ret_hdl:25931
05-19 [Link].915 479 1594 I libPowerHal: [PE] scn:2 hdl:25931
lock_user:[email protected] pid:918 tid:28453 dur:0
05-19 [Link].929 918 28448 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].929 918 28448 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].929 918 28448 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].929 918 28448 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].929 918 28448 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].012 918 28400 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].054 918 28400 I mtkpower_client: perf_lock_rel, hdl:25925,
tid:28400
05-19 [Link].056 918 28400 I mtkpower_client: perf_lock_rel, hdl:25923,
tid:28400
05-19 [Link].056 918 28400 I mtkpower_client: perf_lock_rel, hdl:25922,
tid:28400
05-19 [Link].058 918 28400 I mtkpower_client: perf_lock_rel, hdl:25921,
tid:28400
05-19 [Link].068 479 1594 I libPowerHal: [PD] scn:0 hdl:25922
lock_user:[email protected] pid:918 tid:28406 dur:0
05-19 [Link].207 918 28452 I mtkpower_client: perf_lock_rel, hdl:25931,
tid:28452
05-19 [Link].208 918 28452 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28452
05-19 [Link].211 479 1594 I libPowerHal: [PD] scn:2 hdl:25931
lock_user:[email protected] pid:918 tid:28453 dur:0
05-19 [Link].215 918 28452 I mtkpower_client: ret_hdl:25932
05-19 [Link].215 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25932 hint:-1
pid:918 duration:0 => ret_hdl:25932
05-19 [Link].216 479 1594 I libPowerHal: [PE] scn:0 hdl:25932
lock_user:[email protected] pid:918 tid:28452 dur:0
05-19 [Link].841 918 9097 E OMXNodeInstance:
setParameter(0xea5f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].841 918 9097 E OMXNodeInstance:
getParameter(0xea5f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].855 918 15680 E MtkOmxVdecEx: [0xea5f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].855 918 15680 E OMXNodeInstance:
setConfig(0xea5f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].855 918 1064 E OMXNodeInstance:
getParameter(0xea5f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].856 918 1064 E OMXNodeInstance:
getConfig(0xea5f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].856 918 1064 E OMXNodeInstance:
getConfig(0xea5f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].936 918 28494 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fc4810
05-19 [Link].936 918 28494 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].936 918 28494 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].938 918 28494 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].939 918 28494 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 58297
05-19 [Link].939 918 28494 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde3f0000
05-19 [Link].939 918 28494 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].944 918 28500 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28500
05-19 [Link].944 918 28500 I mtkpower_client: ret_hdl:25936
05-19 [Link].945 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25936 hint:-1
pid:918 duration:0 => ret_hdl:25936
05-19 [Link].945 479 1594 I libPowerHal: [PE] scn:1 hdl:25936
lock_user:[email protected] pid:918 tid:28500 dur:0
05-19 [Link].993 918 28494 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].993 918 28494 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].993 918 28494 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].993 918 28494 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].993 918 28494 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].300 918 28499 I mtkpower_client: perf_lock_rel, hdl:25936,
tid:28499
05-19 [Link].301 918 28499 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28499
05-19 [Link].302 479 1594 I libPowerHal: [PD] scn:1 hdl:25936
lock_user:[email protected] pid:918 tid:28500 dur:0
05-19 [Link].305 918 28499 I mtkpower_client: ret_hdl:25939
05-19 [Link].306 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25939 hint:-1
pid:918 duration:0 => ret_hdl:25939
05-19 [Link].306 479 1594 I libPowerHal: [PE] scn:1 hdl:25939
lock_user:[email protected] pid:918 tid:28499 dur:0
05-19 [Link].428 918 28447 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].450 918 28447 I mtkpower_client: perf_lock_rel, hdl:25932,
tid:28447
05-19 [Link].451 918 28447 I mtkpower_client: perf_lock_rel, hdl:25931,
tid:28447
05-19 [Link].452 479 1594 I libPowerHal: [PD] scn:0 hdl:25932
lock_user:[email protected] pid:918 tid:28452 dur:0
05-19 [Link].930 3148 23918 E WakeLock: GCM_HB_ALARM release without a matched
acquire!
05-19 [Link].198 918 11677 E OMXNodeInstance:
setParameter(0xea4f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].199 918 9097 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].201 918 11677 E MtkOmxVdecEx: [0xea4f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].202 918 11677 E OMXNodeInstance:
setConfig(0xea4f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].202 918 11677 E OMXNodeInstance:
getParameter(0xea4f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].202 918 32761 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].203 918 1085 E OMXNodeInstance:
getConfig(0xea4f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].265 918 28541 E VDO_LOG : GetDecoderAPI hWrapper 0xe9cc0810
05-19 [Link].265 918 28541 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].265 918 28541 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].266 918 28541 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].266 918 28541 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 47734
05-19 [Link].266 918 28541 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xd8d27000
05-19 [Link].266 918 28541 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].277 918 28546 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28546
05-19 [Link].280 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25943 hint:-1
pid:918 duration:0 => ret_hdl:25943
05-19 [Link].280 479 1594 I libPowerHal: [PE] scn:2 hdl:25943
lock_user:[email protected] pid:918 tid:28546 dur:0
05-19 [Link].281 918 28546 I mtkpower_client: ret_hdl:25943
05-19 [Link].283 918 28541 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].283 918 28541 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].283 918 28541 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].283 918 28541 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].283 918 28541 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].419 918 28499 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28499
05-19 [Link].420 918 28499 I mtkpower_client: ret_hdl:25946
05-19 [Link].420 918 28499 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28499
05-19 [Link].420 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25946 hint:-1
pid:918 duration:0 => ret_hdl:25946
05-19 [Link].420 479 1594 I libPowerHal: [PE] scn:3 hdl:25946
lock_user:[email protected] pid:918 tid:28499 dur:0
05-19 [Link].421 918 28499 I mtkpower_client: ret_hdl:25947
05-19 [Link].421 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25947 hint:-1
pid:918 duration:0 => ret_hdl:25947
05-19 [Link].421 479 1594 I libPowerHal: [PE] scn:5 hdl:25947
lock_user:[email protected] pid:918 tid:28499 dur:0
05-19 [Link].678 918 28493 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].701 918 28493 I mtkpower_client: perf_lock_rel, hdl:25947,
tid:28493
05-19 [Link].702 918 28493 I mtkpower_client: perf_lock_rel, hdl:25946,
tid:28493
05-19 [Link].702 918 28493 I mtkpower_client: perf_lock_rel, hdl:25939,
tid:28493
05-19 [Link].702 918 28493 I mtkpower_client: perf_lock_rel, hdl:25936,
tid:28493
05-19 [Link].702 479 1594 I libPowerHal: [PD] scn:5 hdl:25947
lock_user:[email protected] pid:918 tid:28499 dur:0
05-19 [Link].704 479 1594 I libPowerHal: [PD] scn:3 hdl:25946
lock_user:[email protected] pid:918 tid:28499 dur:0
05-19 [Link].706 479 1594 I libPowerHal: [PD] scn:1 hdl:25939
lock_user:[email protected] pid:918 tid:28499 dur:0
05-19 [Link].749 918 28545 I mtkpower_client: perf_lock_rel, hdl:25943,
tid:28545
05-19 [Link].749 918 28545 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28545
05-19 [Link].751 479 1594 I libPowerHal: [PD] scn:2 hdl:25943
lock_user:[email protected] pid:918 tid:28546 dur:0
05-19 [Link].753 918 28545 I mtkpower_client: ret_hdl:25948
05-19 [Link].753 918 28545 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28545
05-19 [Link].754 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25948 hint:-1
pid:918 duration:0 => ret_hdl:25948
05-19 [Link].754 479 1594 I libPowerHal: [PE] scn:1 hdl:25948
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].755 918 28545 I mtkpower_client: ret_hdl:25949
05-19 [Link].755 918 28545 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28545
05-19 [Link].756 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25949 hint:-1
pid:918 duration:0 => ret_hdl:25949
05-19 [Link].757 479 1594 I libPowerHal: [PE] scn:2 hdl:25949
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].758 918 28545 I mtkpower_client: ret_hdl:25950
05-19 [Link].758 918 28545 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28545
05-19 [Link].759 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25950 hint:-1
pid:918 duration:0 => ret_hdl:25950
05-19 [Link].760 479 1594 I libPowerHal: [PE] scn:3 hdl:25950
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].761 918 28545 I mtkpower_client: ret_hdl:25951
05-19 [Link].762 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25951 hint:-1
pid:918 duration:0 => ret_hdl:25951
05-19 [Link].762 479 1594 I libPowerHal: [PE] scn:4 hdl:25951
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].941 918 28545 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28545
05-19 [Link].943 918 28545 I mtkpower_client: ret_hdl:25955
05-19 [Link].944 918 28545 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28545
05-19 [Link].945 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25955 hint:-1
pid:918 duration:0 => ret_hdl:25955
05-19 [Link].945 479 1594 I libPowerHal: [PE] scn:7 hdl:25955
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].947 918 28545 I mtkpower_client: ret_hdl:25956
05-19 [Link].948 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:25956 hint:-1
pid:918 duration:0 => ret_hdl:25956
05-19 [Link].948 479 1594 I libPowerHal: [PE] scn:8 hdl:25956
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].073 918 28545 I mtkpower_client: perf_lock_rel, hdl:25956,
tid:28545
05-19 [Link].074 479 1594 I libPowerHal: [PD] scn:8 hdl:25956
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].121 918 11677 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].121 918 11677 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].123 918 11677 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].123 918 11677 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].124 918 11677 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].125 918 11677 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].126 918 11677 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].220 918 28589 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].220 918 28589 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].220 918 28589 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].220 918 28589 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].220 918 28589 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 58297
05-19 [Link].221 918 28589 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xddec0000
05-19 [Link].221 918 28589 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].221 918 28540 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].240 918 28595 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28595
05-19 [Link].241 918 28595 I mtkpower_client: ret_hdl:25959
05-19 [Link].241 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25959 hint:-1
pid:918 duration:0 => ret_hdl:25959
05-19 [Link].241 479 1594 I libPowerHal: [PE] scn:0 hdl:25959
lock_user:[email protected] pid:918 tid:28595 dur:0
05-19 [Link].249 918 28540 I mtkpower_client: perf_lock_rel, hdl:25956,
tid:28540
05-19 [Link].250 918 28540 I mtkpower_client: perf_lock_rel, hdl:25955,
tid:28540
05-19 [Link].251 918 28540 I mtkpower_client: perf_lock_rel, hdl:25951,
tid:28540
05-19 [Link].251 918 28540 I mtkpower_client: perf_lock_rel, hdl:25950,
tid:28540
05-19 [Link].251 918 28540 I mtkpower_client: perf_lock_rel, hdl:25949,
tid:28540
05-19 [Link].251 918 28540 I mtkpower_client: perf_lock_rel, hdl:25948,
tid:28540
05-19 [Link].251 918 28540 I mtkpower_client: perf_lock_rel, hdl:25943,
tid:28540
05-19 [Link].252 479 1594 I libPowerHal: [PD] scn:7 hdl:25955
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].257 479 1594 I libPowerHal: [PD] scn:4 hdl:25951
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].258 479 1594 I libPowerHal: [PD] scn:3 hdl:25950
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].260 479 1594 I libPowerHal: [PD] scn:2 hdl:25949
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].261 479 1594 I libPowerHal: [PD] scn:1 hdl:25948
lock_user:[email protected] pid:918 tid:28545 dur:0
05-19 [Link].342 918 28589 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].342 918 28589 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].342 918 28589 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].342 918 28589 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].342 918 28589 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].608 918 28594 I mtkpower_client: perf_lock_rel, hdl:25959,
tid:28594
05-19 [Link].608 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].609 479 1594 I libPowerHal: [PD] scn:0 hdl:25959
lock_user:[email protected] pid:918 tid:28595 dur:0
05-19 [Link].610 918 28594 I mtkpower_client: ret_hdl:25960
05-19 [Link].610 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].611 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25960 hint:-1
pid:918 duration:0 => ret_hdl:25960
05-19 [Link].611 479 1594 I libPowerHal: [PE] scn:1 hdl:25960
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].611 918 28594 I mtkpower_client: ret_hdl:25961
05-19 [Link].612 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25961 hint:-1
pid:918 duration:0 => ret_hdl:25961
05-19 [Link].612 479 1594 I libPowerHal: [PE] scn:0 hdl:25961
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].662 918 28594 I mtkpower_client: perf_lock_rel, hdl:25961,
tid:28594
05-19 [Link].663 479 1594 I libPowerHal: [PD] scn:0 hdl:25961
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].870 918 28328 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].871 918 28328 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].872 918 28328 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].872 918 28328 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].924 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].926 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25962 hint:-1
pid:918 duration:0 => ret_hdl:25962
05-19 [Link].926 918 28594 I mtkpower_client: ret_hdl:25962
05-19 [Link].926 479 1594 I libPowerHal: [PE] scn:0 hdl:25962
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].008 918 28594 I mtkpower_client: perf_lock_rel, hdl:25962,
tid:28594
05-19 [Link].009 479 1594 I libPowerHal: [PD] scn:0 hdl:25962
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].249 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].250 918 28594 I mtkpower_client: ret_hdl:25963
05-19 [Link].250 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25963 hint:-1
pid:918 duration:0 => ret_hdl:25963
05-19 [Link].250 479 1594 I libPowerHal: [PE] scn:0 hdl:25963
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].760 918 28594 I mtkpower_client: perf_lock_rel, hdl:25963,
tid:28594
05-19 [Link].761 479 1594 I libPowerHal: [PD] scn:0 hdl:25963
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].932 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].933 918 28594 I mtkpower_client: ret_hdl:25964
05-19 [Link].934 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25964 hint:-1
pid:918 duration:0 => ret_hdl:25964
05-19 [Link].934 479 1594 I libPowerHal: [PE] scn:0 hdl:25964
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].281 918 28594 I mtkpower_client: perf_lock_rel, hdl:25964,
tid:28594
05-19 [Link].282 479 1594 I libPowerHal: [PD] scn:0 hdl:25964
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].861 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].861 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25965 hint:-1
pid:918 duration:0 => ret_hdl:25965
05-19 [Link].861 918 28594 I mtkpower_client: ret_hdl:25965
05-19 [Link].861 479 1594 I libPowerHal: [PE] scn:0 hdl:25965
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].963 918 28594 I mtkpower_client: perf_lock_rel, hdl:25965,
tid:28594
05-19 [Link].963 479 1594 I libPowerHal: [PD] scn:0 hdl:25965
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].302 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].302 918 28594 I mtkpower_client: ret_hdl:25966
05-19 [Link].303 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].303 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:25966 hint:-1
pid:918 duration:0 => ret_hdl:25966
05-19 [Link].303 479 1594 I libPowerHal: [PE] scn:0 hdl:25966
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].304 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25967 hint:-1
pid:918 duration:0 => ret_hdl:25967
05-19 [Link].305 479 1594 I libPowerHal: [PE] scn:2 hdl:25967
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].305 918 28594 I mtkpower_client: ret_hdl:25967
05-19 [Link].305 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].306 918 28594 I mtkpower_client: ret_hdl:25968
05-19 [Link].306 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].306 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25968 hint:-1
pid:918 duration:0 => ret_hdl:25968
05-19 [Link].306 479 1594 I libPowerHal: [PE] scn:3 hdl:25968
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].307 918 28594 I mtkpower_client: ret_hdl:25969
05-19 [Link].307 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].307 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:25969 hint:-1
pid:918 duration:0 => ret_hdl:25969
05-19 [Link].307 479 1594 I libPowerHal: [PE] scn:4 hdl:25969
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].307 918 28594 I mtkpower_client: ret_hdl:25970
05-19 [Link].307 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].307 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:25970 hint:-1
pid:918 duration:0 => ret_hdl:25970
05-19 [Link].307 479 1594 I libPowerHal: [PE] scn:5 hdl:25970
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].308 918 28594 I mtkpower_client: ret_hdl:25971
05-19 [Link].308 918 28594 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28594
05-19 [Link].308 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:25971 hint:-1
pid:918 duration:0 => ret_hdl:25971
05-19 [Link].308 479 1594 I libPowerHal: [PE] scn:6 hdl:25971
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].308 918 28594 I mtkpower_client: ret_hdl:25972
05-19 [Link].308 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:25972 hint:-1
pid:918 duration:0 => ret_hdl:25972
05-19 [Link].308 479 1594 I libPowerHal: [PE] scn:7 hdl:25972
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].412 918 28594 I mtkpower_client: perf_lock_rel, hdl:25972,
tid:28594
05-19 [Link].412 918 28594 I mtkpower_client: perf_lock_rel, hdl:25971,
tid:28594
05-19 [Link].412 918 28594 I mtkpower_client: perf_lock_rel, hdl:25970,
tid:28594
05-19 [Link].412 918 28594 I mtkpower_client: perf_lock_rel, hdl:25969,
tid:28594
05-19 [Link].412 918 28594 I mtkpower_client: perf_lock_rel, hdl:25968,
tid:28594
05-19 [Link].413 479 1594 I libPowerHal: [PD] scn:7 hdl:25972
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].415 479 1594 I libPowerHal: [PD] scn:6 hdl:25971
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].416 479 1594 I libPowerHal: [PD] scn:5 hdl:25970
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].417 479 1594 I libPowerHal: [PD] scn:4 hdl:25969
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].418 479 1594 I libPowerHal: [PD] scn:3 hdl:25968
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].973 918 28594 I mtkpower_client: perf_lock_rel, hdl:25967,
tid:28594
05-19 [Link].973 918 28594 I mtkpower_client: perf_lock_rel, hdl:25966,
tid:28594
05-19 [Link].974 479 1594 I libPowerHal: [PD] scn:2 hdl:25967
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].979 479 1594 I libPowerHal: [PD] scn:0 hdl:25966
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].422 918 6021 E OMXNodeInstance:
setParameter(0xe9f42804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].422 918 6021 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].428 918 6021 E MtkOmxVdecEx: [0xe9f42800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].428 918 6021 E OMXNodeInstance:
setConfig(0xe9f42804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].428 918 6021 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].429 918 6021 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].430 918 6021 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].564 918 28665 E VDO_LOG : GetDecoderAPI hWrapper 0xea20c810
05-19 [Link].564 918 28665 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].564 918 28665 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].566 918 28665 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].567 918 28665 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 47734
05-19 [Link].567 918 28665 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3c8d000
05-19 [Link].567 918 28665 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].572 918 28671 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28671
05-19 [Link].574 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25978 hint:-1
pid:918 duration:0 => ret_hdl:25978
05-19 [Link].574 479 1594 I libPowerHal: [PE] scn:2 hdl:25978
lock_user:[email protected] pid:918 tid:28671 dur:0
05-19 [Link].575 918 28671 I mtkpower_client: ret_hdl:25978
05-19 [Link].589 918 28665 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].589 918 28665 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].589 918 28665 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].589 918 28665 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].589 918 28665 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].676 918 28588 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].709 918 28588 I mtkpower_client: perf_lock_rel, hdl:25972,
tid:28588
05-19 [Link].709 918 28588 I mtkpower_client: perf_lock_rel, hdl:25971,
tid:28588
05-19 [Link].709 918 28588 I mtkpower_client: perf_lock_rel, hdl:25970,
tid:28588
05-19 [Link].710 918 28588 I mtkpower_client: perf_lock_rel, hdl:25969,
tid:28588
05-19 [Link].710 918 28588 I mtkpower_client: perf_lock_rel, hdl:25968,
tid:28588
05-19 [Link].710 918 28588 I mtkpower_client: perf_lock_rel, hdl:25967,
tid:28588
05-19 [Link].710 918 28588 I mtkpower_client: perf_lock_rel, hdl:25966,
tid:28588
05-19 [Link].710 918 28588 I mtkpower_client: perf_lock_rel, hdl:25960,
tid:28588
05-19 [Link].710 918 28588 I mtkpower_client: perf_lock_rel, hdl:25959,
tid:28588
05-19 [Link].714 479 1594 I libPowerHal: [PD] scn:1 hdl:25960
lock_user:[email protected] pid:918 tid:28594 dur:0
05-19 [Link].906 918 28670 I mtkpower_client: perf_lock_rel, hdl:25978,
tid:28670
05-19 [Link].906 918 28670 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28670
05-19 [Link].906 479 1594 I libPowerHal: [PD] scn:2 hdl:25978
lock_user:[email protected] pid:918 tid:28671 dur:0
05-19 [Link].907 918 28670 I mtkpower_client: ret_hdl:25979
05-19 [Link].907 918 28670 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28670
05-19 [Link].907 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25979 hint:-1
pid:918 duration:0 => ret_hdl:25979
05-19 [Link].907 479 1594 I libPowerHal: [PE] scn:1 hdl:25979
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].908 918 28670 I mtkpower_client: ret_hdl:25980
05-19 [Link].908 918 28670 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28670
05-19 [Link].908 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25980 hint:-1
pid:918 duration:0 => ret_hdl:25980
05-19 [Link].908 479 1594 I libPowerHal: [PE] scn:2 hdl:25980
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].909 918 28670 I mtkpower_client: ret_hdl:25981
05-19 [Link].909 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25981 hint:-1
pid:918 duration:0 => ret_hdl:25981
05-19 [Link].909 479 1594 I libPowerHal: [PE] scn:3 hdl:25981
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].988 918 28670 I mtkpower_client: perf_lock_rel, hdl:25981,
tid:28670
05-19 [Link].989 479 1594 I libPowerHal: [PD] scn:3 hdl:25981
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].060 918 28670 I mtkpower_client: perf_lock_rel, hdl:25980,
tid:28670
05-19 [Link].061 479 1594 I libPowerHal: [PD] scn:2 hdl:25980
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].220 918 6021 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].220 918 6021 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].222 918 6021 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].222 918 6021 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].223 918 6021 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].223 918 6021 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].224 918 6021 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].344 918 28708 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].344 918 28708 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].344 918 28708 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].348 918 28708 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].348 918 28708 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18716
05-19 [Link].348 918 28708 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe14c2000
05-19 [Link].348 918 28708 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].353 918 28717 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28717
05-19 [Link].354 918 28717 I mtkpower_client: ret_hdl:25987
05-19 [Link].354 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25987 hint:-1
pid:918 duration:0 => ret_hdl:25987
05-19 [Link].354 479 1594 I libPowerHal: [PE] scn:2 hdl:25987
lock_user:[email protected] pid:918 tid:28717 dur:0
05-19 [Link].373 918 28670 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28670
05-19 [Link].374 918 28670 I mtkpower_client: ret_hdl:25988
05-19 [Link].374 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25988 hint:-1
pid:918 duration:0 => ret_hdl:25988
05-19 [Link].374 479 1594 I libPowerHal: [PE] scn:3 hdl:25988
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].384 918 28708 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].385 918 28708 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].385 918 28708 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].385 918 28708 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].385 918 28708 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].524 918 28663 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].541 918 28663 I mtkpower_client: perf_lock_rel, hdl:25981,
tid:28663
05-19 [Link].542 918 28663 I mtkpower_client: perf_lock_rel, hdl:25988,
tid:28663
05-19 [Link].542 918 28663 I mtkpower_client: perf_lock_rel, hdl:25979,
tid:28663
05-19 [Link].542 918 28663 I mtkpower_client: perf_lock_rel, hdl:25978,
tid:28663
05-19 [Link].543 479 1594 I libPowerHal: [PD] scn:3 hdl:25988
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].544 479 1594 I libPowerHal: [PD] scn:1 hdl:25979
lock_user:[email protected] pid:918 tid:28670 dur:0
05-19 [Link].564 918 28716 I mtkpower_client: perf_lock_rel, hdl:25987,
tid:28716
05-19 [Link].565 918 28716 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28716
05-19 [Link].566 479 1594 I libPowerHal: [PD] scn:2 hdl:25987
lock_user:[email protected] pid:918 tid:28717 dur:0
05-19 [Link].567 918 28716 I mtkpower_client: ret_hdl:25989
05-19 [Link].567 918 28716 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28716
05-19 [Link].568 918 28716 I mtkpower_client: ret_hdl:25990
05-19 [Link].569 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25989 hint:-1
pid:918 duration:0 => ret_hdl:25989
05-19 [Link].569 479 1594 I libPowerHal: [PE] scn:1 hdl:25989
lock_user:[email protected] pid:918 tid:28716 dur:0
05-19 [Link].571 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25990 hint:-1
pid:918 duration:0 => ret_hdl:25990
05-19 [Link].571 479 1594 I libPowerHal: [PE] scn:2 hdl:25990
lock_user:[email protected] pid:918 tid:28716 dur:0
05-19 [Link].711 918 28716 I mtkpower_client: perf_lock_rel, hdl:25990,
tid:28716
05-19 [Link].712 479 1594 I libPowerHal: [PD] scn:2 hdl:25990
lock_user:[email protected] pid:918 tid:28716 dur:0
05-19 [Link].817 918 6021 E OMXNodeInstance:
setParameter(0xe9f42804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].818 918 6021 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].822 918 5033 E MtkOmxVdecEx: [0xe9f42800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].822 918 5033 E OMXNodeInstance:
setConfig(0xe9f42804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].823 918 6021 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].824 918 5033 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].824 918 6021 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].884 918 28757 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].884 918 28757 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].884 918 28757 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].897 918 28757 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].897 918 28757 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 53705
05-19 [Link].897 918 28757 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].897 918 28757 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].909 918 28763 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28763
05-19 [Link].910 918 28763 I mtkpower_client: ret_hdl:25996
05-19 [Link].911 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:25996 hint:-1
pid:918 duration:0 => ret_hdl:25996
05-19 [Link].911 479 1594 I libPowerHal: [PE] scn:2 hdl:25996
lock_user:[email protected] pid:918 tid:28763 dur:0
05-19 [Link].918 23232 28760 E FMQ : grantorIdx must be less than 3
05-19 [Link].949 918 28757 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].949 918 28757 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].949 918 28757 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].949 918 28757 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].949 918 28757 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].977 918 28716 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28716
05-19 [Link].978 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:25997 hint:-1
pid:918 duration:0 => ret_hdl:25997
05-19 [Link].978 479 1594 I libPowerHal: [PE] scn:3 hdl:25997
lock_user:[email protected] pid:918 tid:28716 dur:0
05-19 [Link].981 918 28716 I mtkpower_client: ret_hdl:25997
05-19 [Link].114 918 28707 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].141 918 28707 I mtkpower_client: perf_lock_rel, hdl:25997,
tid:28707
05-19 [Link].145 918 28707 I mtkpower_client: perf_lock_rel, hdl:25989,
tid:28707
05-19 [Link].146 479 1594 I libPowerHal: [PD] scn:3 hdl:25997
lock_user:[email protected] pid:918 tid:28716 dur:0
05-19 [Link].146 918 28707 I mtkpower_client: perf_lock_rel, hdl:25987,
tid:28707
05-19 [Link].147 479 1594 I libPowerHal: [PD] scn:1 hdl:25989
lock_user:[email protected] pid:918 tid:28716 dur:0
05-19 [Link].167 918 28762 I mtkpower_client: perf_lock_rel, hdl:25996,
tid:28762
05-19 [Link].167 918 28762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28762
05-19 [Link].170 479 1594 I libPowerHal: [PD] scn:2 hdl:25996
lock_user:[email protected] pid:918 tid:28763 dur:0
05-19 [Link].172 918 28762 I mtkpower_client: ret_hdl:25998
05-19 [Link].172 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:25998 hint:-1
pid:918 duration:0 => ret_hdl:25998
05-19 [Link].172 479 1594 I libPowerHal: [PE] scn:1 hdl:25998
lock_user:[email protected] pid:918 tid:28762 dur:0
05-19 [Link].483 918 5033 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].483 918 5033 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 5033 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].485 918 5033 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 5033 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 5033 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 5033 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].520 918 28825 E VDO_LOG : GetDecoderAPI hWrapper 0xea02a810
05-19 [Link].520 918 28825 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].520 918 28825 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].521 918 28825 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].521 918 28825 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18716
05-19 [Link].522 918 28825 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe225f000
05-19 [Link].522 918 28825 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].524 918 28830 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28830
05-19 [Link].525 918 28830 I mtkpower_client: ret_hdl:26004
05-19 [Link].525 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26004 hint:-1
pid:918 duration:0 => ret_hdl:26004
05-19 [Link].525 479 1594 I libPowerHal: [PE] scn:0 hdl:26004
lock_user:[email protected] pid:918 tid:28830 dur:0
05-19 [Link].530 918 28825 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].530 918 28825 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].530 918 28825 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].530 918 28825 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].530 918 28825 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].728 918 28756 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].761 918 28756 I mtkpower_client: perf_lock_rel, hdl:25998,
tid:28756
05-19 [Link].761 918 28756 I mtkpower_client: perf_lock_rel, hdl:25996,
tid:28756
05-19 [Link].762 479 1594 I libPowerHal: [PD] scn:1 hdl:25998
lock_user:[email protected] pid:918 tid:28762 dur:0
05-19 [Link].770 918 28829 I mtkpower_client: perf_lock_rel, hdl:26004,
tid:28829
05-19 [Link].771 918 28829 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28829
05-19 [Link].776 479 1594 I libPowerHal: [PD] scn:0 hdl:26004
lock_user:[email protected] pid:918 tid:28830 dur:0
05-19 [Link].777 918 28829 I mtkpower_client: ret_hdl:26005
05-19 [Link].777 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26005 hint:-1
pid:918 duration:0 => ret_hdl:26005
05-19 [Link].777 479 1594 I libPowerHal: [PE] scn:1 hdl:26005
lock_user:[email protected] pid:918 tid:28829 dur:0
05-19 [Link].184 918 918 E OMXNodeInstance:
setParameter(0xe9f42804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].185 918 918 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].196 918 918 E MtkOmxVdecEx: [0xe9f42800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].196 918 918 E OMXNodeInstance:
setConfig(0xe9f42804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].203 918 918 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].204 918 918 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].204 918 918 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].405 918 28869 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].405 918 28869 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].405 918 28869 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].406 918 28869 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].406 918 28869 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 53705
05-19 [Link].406 918 28869 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].406 918 28869 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].415 918 28877 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28877
05-19 [Link].416 918 28877 I mtkpower_client: ret_hdl:26011
05-19 [Link].416 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26011 hint:-1
pid:918 duration:0 => ret_hdl:26011
05-19 [Link].416 479 1594 I libPowerHal: [PE] scn:2 hdl:26011
lock_user:[email protected] pid:918 tid:28877 dur:0
05-19 [Link].424 918 28869 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].424 918 28869 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].424 918 28869 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].424 918 28869 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].424 918 28869 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].500 918 28824 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].515 918 28824 I mtkpower_client: perf_lock_rel, hdl:26005,
tid:28824
05-19 [Link].515 918 28824 I mtkpower_client: perf_lock_rel, hdl:26004,
tid:28824
05-19 [Link].516 479 1594 I libPowerHal: [PD] scn:1 hdl:26005
lock_user:[email protected] pid:918 tid:28829 dur:0
05-19 [Link].642 918 28876 I mtkpower_client: perf_lock_rel, hdl:26011,
tid:28876
05-19 [Link].643 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].643 479 1594 I libPowerHal: [PD] scn:2 hdl:26011
lock_user:[email protected] pid:918 tid:28877 dur:0
05-19 [Link].644 918 28876 I mtkpower_client: ret_hdl:26014
05-19 [Link].644 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].644 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26014 hint:-1
pid:918 duration:0 => ret_hdl:26014
05-19 [Link].644 479 1594 I libPowerHal: [PE] scn:3 hdl:26014
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].647 918 28876 I mtkpower_client: ret_hdl:26016
05-19 [Link].647 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].647 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26016 hint:-1
pid:918 duration:0 => ret_hdl:26016
05-19 [Link].647 479 1594 I libPowerHal: [PE] scn:4 hdl:26016
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].648 918 28876 I mtkpower_client: ret_hdl:26017
05-19 [Link].648 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].648 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26017 hint:-1
pid:918 duration:0 => ret_hdl:26017
05-19 [Link].648 479 1594 I libPowerHal: [PE] scn:5 hdl:26017
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].650 918 28876 I mtkpower_client: ret_hdl:26018
05-19 [Link].650 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26018 hint:-1
pid:918 duration:0 => ret_hdl:26018
05-19 [Link].650 479 1594 I libPowerHal: [PE] scn:6 hdl:26018
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].748 918 32761 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].749 918 1780 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].752 918 1780 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].752 918 1780 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].752 918 6021 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].753 918 32761 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].754 918 1064 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].789 918 28916 E VDO_LOG : GetDecoderAPI hWrapper 0xea02a810
05-19 [Link].789 918 28916 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].789 918 28916 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].790 918 28916 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].790 918 28916 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18716
05-19 [Link].790 918 28916 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde80e000
05-19 [Link].790 918 28916 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].793 918 28921 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28921
05-19 [Link].794 918 28921 I mtkpower_client: ret_hdl:26021
05-19 [Link].795 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26021 hint:-1
pid:918 duration:0 => ret_hdl:26021
05-19 [Link].795 479 1594 I libPowerHal: [PE] scn:0 hdl:26021
lock_user:[email protected] pid:918 tid:28921 dur:0
05-19 [Link].804 918 28916 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].804 918 28916 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].804 918 28916 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].804 918 28916 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].804 918 28916 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].855 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].856 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26022 hint:-1
pid:918 duration:0 => ret_hdl:26022
05-19 [Link].856 479 1594 I libPowerHal: [PE] scn:2 hdl:26022
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].857 918 28876 I mtkpower_client: ret_hdl:26022
05-19 [Link].857 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].858 918 28876 I mtkpower_client: ret_hdl:26023
05-19 [Link].858 918 28876 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28876
05-19 [Link].859 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26023 hint:-1
pid:918 duration:0 => ret_hdl:26023
05-19 [Link].859 479 1594 I libPowerHal: [PE] scn:7 hdl:26023
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].860 918 28876 I mtkpower_client: ret_hdl:26024
05-19 [Link].861 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:26024 hint:-1
pid:918 duration:0 => ret_hdl:26024
05-19 [Link].861 479 1594 I libPowerHal: [PE] scn:8 hdl:26024
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].036 918 28868 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].053 918 28868 I mtkpower_client: perf_lock_rel, hdl:26024,
tid:28868
05-19 [Link].054 479 1594 I libPowerHal: [PD] scn:8 hdl:26024
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].059 918 28868 I mtkpower_client: perf_lock_rel, hdl:26023,
tid:28868
05-19 [Link].059 918 28868 I mtkpower_client: perf_lock_rel, hdl:26022,
tid:28868
05-19 [Link].059 918 28868 I mtkpower_client: perf_lock_rel, hdl:26018,
tid:28868
05-19 [Link].059 918 28868 I mtkpower_client: perf_lock_rel, hdl:26017,
tid:28868
05-19 [Link].060 918 28868 I mtkpower_client: perf_lock_rel, hdl:26016,
tid:28868
05-19 [Link].060 918 28868 I mtkpower_client: perf_lock_rel, hdl:26014,
tid:28868
05-19 [Link].060 918 28868 I mtkpower_client: perf_lock_rel, hdl:26011,
tid:28868
05-19 [Link].060 479 1594 I libPowerHal: [PD] scn:7 hdl:26023
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].061 479 1594 I libPowerHal: [PD] scn:2 hdl:26022
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].062 479 1594 I libPowerHal: [PD] scn:6 hdl:26018
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].063 479 1594 I libPowerHal: [PD] scn:5 hdl:26017
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].064 479 1594 I libPowerHal: [PD] scn:4 hdl:26016
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].065 479 1594 I libPowerHal: [PD] scn:3 hdl:26014
lock_user:[email protected] pid:918 tid:28876 dur:0
05-19 [Link].123 918 28920 I mtkpower_client: perf_lock_rel, hdl:26021,
tid:28920
05-19 [Link].124 918 28920 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28920
05-19 [Link].124 479 1594 I libPowerHal: [PD] scn:0 hdl:26021
lock_user:[email protected] pid:918 tid:28921 dur:0
05-19 [Link].125 918 28920 I mtkpower_client: ret_hdl:26025
05-19 [Link].125 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26025 hint:-1
pid:918 duration:0 => ret_hdl:26025
05-19 [Link].125 479 1594 I libPowerHal: [PE] scn:2 hdl:26025
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].125 918 28920 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28920
05-19 [Link].128 918 28920 I mtkpower_client: ret_hdl:26026
05-19 [Link].128 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26026 hint:-1
pid:918 duration:0 => ret_hdl:26026
05-19 [Link].128 479 1594 I libPowerHal: [PE] scn:0 hdl:26026
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].180 918 28920 I mtkpower_client: perf_lock_rel, hdl:26026,
tid:28920
05-19 [Link].182 479 1594 I libPowerHal: [PD] scn:0 hdl:26026
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].274 918 1784 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].275 918 1784 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].279 918 1784 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].279 918 1784 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].280 918 1784 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].281 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].282 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].351 918 29065 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].351 918 29065 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].351 918 29065 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].356 918 29065 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].356 918 29065 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 53705
05-19 [Link].356 918 29065 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].356 918 29065 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].366 918 29073 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29073
05-19 [Link].369 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26032 hint:-1
pid:918 duration:0 => ret_hdl:26032
05-19 [Link].369 479 1594 I libPowerHal: [PE] scn:1 hdl:26032
lock_user:[email protected] pid:918 tid:29073 dur:0
05-19 [Link].370 918 29073 I mtkpower_client: ret_hdl:26032
05-19 [Link].398 918 29065 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].399 918 29065 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].399 918 29065 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].399 918 29065 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].399 918 29065 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].520 918 28920 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28920
05-19 [Link].522 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26033 hint:-1
pid:918 duration:0 => ret_hdl:26033
05-19 [Link].522 479 1594 I libPowerHal: [PE] scn:3 hdl:26033
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].524 918 28920 I mtkpower_client: ret_hdl:26033
05-19 [Link].524 918 28920 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:28920
05-19 [Link].525 918 28920 I mtkpower_client: ret_hdl:26034
05-19 [Link].526 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26034 hint:-1
pid:918 duration:0 => ret_hdl:26034
05-19 [Link].526 479 1594 I libPowerHal: [PE] scn:4 hdl:26034
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].626 918 28915 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].647 918 28915 I mtkpower_client: perf_lock_rel, hdl:26034,
tid:28915
05-19 [Link].648 479 1594 I libPowerHal: [PD] scn:4 hdl:26034
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].657 918 28915 I mtkpower_client: perf_lock_rel, hdl:26033,
tid:28915
05-19 [Link].658 918 28915 I mtkpower_client: perf_lock_rel, hdl:26025,
tid:28915
05-19 [Link].658 918 28915 I mtkpower_client: perf_lock_rel, hdl:26021,
tid:28915
05-19 [Link].659 479 1594 I libPowerHal: [PD] scn:3 hdl:26033
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].660 479 1594 I libPowerHal: [PD] scn:2 hdl:26025
lock_user:[email protected] pid:918 tid:28920 dur:0
05-19 [Link].680 918 29071 I mtkpower_client: perf_lock_rel, hdl:26032,
tid:29071
05-19 [Link].681 918 29071 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29071
05-19 [Link].685 479 1594 I libPowerHal: [PD] scn:1 hdl:26032
lock_user:[email protected] pid:918 tid:29073 dur:0
05-19 [Link].686 918 29071 I mtkpower_client: ret_hdl:26035
05-19 [Link].686 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26035 hint:-1
pid:918 duration:0 => ret_hdl:26035
05-19 [Link].686 479 1594 I libPowerHal: [PE] scn:2 hdl:26035
lock_user:[email protected] pid:918 tid:29071 dur:0
05-19 [Link].964 918 1088 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].965 918 1088 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].967 918 1784 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].967 918 1784 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].968 918 1784 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].968 918 1784 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].969 918 1784 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].004 918 29115 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].004 918 29115 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].004 918 29115 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].005 918 29115 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].005 918 29115 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 24944
05-19 [Link].005 918 29115 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfb3c000
05-19 [Link].005 918 29115 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].008 918 29120 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29120
05-19 [Link].009 918 29120 I mtkpower_client: ret_hdl:26041
05-19 [Link].009 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26041 hint:-1
pid:918 duration:0 => ret_hdl:26041
05-19 [Link].009 479 1594 I libPowerHal: [PE] scn:0 hdl:26041
lock_user:[email protected] pid:918 tid:29120 dur:0
05-19 [Link].014 918 29115 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].014 918 29115 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].014 918 29115 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].014 918 29115 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].014 918 29115 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].198 918 29064 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].220 918 29064 I mtkpower_client: perf_lock_rel, hdl:26035,
tid:29064
05-19 [Link].220 479 1594 I libPowerHal: [PD] scn:2 hdl:26035
lock_user:[email protected] pid:918 tid:29071 dur:0
05-19 [Link].222 918 29064 I mtkpower_client: perf_lock_rel, hdl:26032,
tid:29064
05-19 [Link].399 918 29119 I mtkpower_client: perf_lock_rel, hdl:26041,
tid:29119
05-19 [Link].399 918 29119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29119
05-19 [Link].400 479 1594 I libPowerHal: [PD] scn:0 hdl:26041
lock_user:[email protected] pid:918 tid:29120 dur:0
05-19 [Link].401 918 29119 I mtkpower_client: ret_hdl:26042
05-19 [Link].401 918 29119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29119
05-19 [Link].401 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26042 hint:-1
pid:918 duration:0 => ret_hdl:26042
05-19 [Link].401 479 1594 I libPowerHal: [PE] scn:0 hdl:26042
lock_user:[email protected] pid:918 tid:29119 dur:0
05-19 [Link].402 918 29119 I mtkpower_client: ret_hdl:26043
05-19 [Link].402 918 29119 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29119
05-19 [Link].402 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26043 hint:-1
pid:918 duration:0 => ret_hdl:26043
05-19 [Link].402 479 1594 I libPowerHal: [PE] scn:2 hdl:26043
lock_user:[email protected] pid:918 tid:29119 dur:0
05-19 [Link].403 918 29119 I mtkpower_client: ret_hdl:26044
05-19 [Link].403 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26044 hint:-1
pid:918 duration:0 => ret_hdl:26044
05-19 [Link].403 479 1594 I libPowerHal: [PE] scn:3 hdl:26044
lock_user:[email protected] pid:918 tid:29119 dur:0
05-19 [Link].448 918 29119 I mtkpower_client: perf_lock_rel, hdl:26044,
tid:29119
05-19 [Link].449 479 1594 I libPowerHal: [PD] scn:3 hdl:26044
lock_user:[email protected] pid:918 tid:29119 dur:0
05-19 [Link].526 918 29119 I mtkpower_client: perf_lock_rel, hdl:26043,
tid:29119
05-19 [Link].527 479 1594 I libPowerHal: [PD] scn:2 hdl:26043
lock_user:[email protected] pid:918 tid:29119 dur:0
05-19 [Link].283 918 9097 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].284 918 9097 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].289 918 9097 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].289 918 9097 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].290 918 9097 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].291 918 9097 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].291 918 9097 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].325 918 29164 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].325 918 29164 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].325 918 29164 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].325 918 29164 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].326 918 29164 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 65505
05-19 [Link].326 918 29164 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].326 918 29164 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].329 918 29168 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29168
05-19 [Link].330 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26049 hint:-1
pid:918 duration:0 => ret_hdl:26049
05-19 [Link].330 479 1594 I libPowerHal: [PE] scn:2 hdl:26049
lock_user:[email protected] pid:918 tid:29168 dur:0
05-19 [Link].331 918 29168 I mtkpower_client: ret_hdl:26049
05-19 [Link].340 918 29164 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].340 918 29164 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].340 918 29164 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].340 918 29164 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].340 918 29164 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].559 918 29114 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].589 918 29114 I mtkpower_client: perf_lock_rel, hdl:26044,
tid:29114
05-19 [Link].589 918 29114 I mtkpower_client: perf_lock_rel, hdl:26043,
tid:29114
05-19 [Link].590 918 29114 I mtkpower_client: perf_lock_rel, hdl:26042,
tid:29114
05-19 [Link].590 918 29114 I mtkpower_client: perf_lock_rel, hdl:26041,
tid:29114
05-19 [Link].591 479 1594 I libPowerHal: [PD] scn:0 hdl:26042
lock_user:[email protected] pid:918 tid:29119 dur:0
05-19 [Link].735 918 29167 I mtkpower_client: perf_lock_rel, hdl:26049,
tid:29167
05-19 [Link].736 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].736 479 1594 I libPowerHal: [PD] scn:2 hdl:26049
lock_user:[email protected] pid:918 tid:29168 dur:0
05-19 [Link].738 918 29167 I mtkpower_client: ret_hdl:26050
05-19 [Link].738 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].738 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26050 hint:-1
pid:918 duration:0 => ret_hdl:26050
05-19 [Link].738 479 1594 I libPowerHal: [PE] scn:0 hdl:26050
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].739 918 29167 I mtkpower_client: ret_hdl:26051
05-19 [Link].739 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].740 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26051 hint:-1
pid:918 duration:0 => ret_hdl:26051
05-19 [Link].740 479 1594 I libPowerHal: [PE] scn:1 hdl:26051
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].740 918 29167 I mtkpower_client: ret_hdl:26052
05-19 [Link].741 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26052 hint:-1
pid:918 duration:0 => ret_hdl:26052
05-19 [Link].741 479 1594 I libPowerHal: [PE] scn:2 hdl:26052
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].911 918 29167 I mtkpower_client: perf_lock_rel, hdl:26052,
tid:29167
05-19 [Link].913 479 1594 I libPowerHal: [PD] scn:2 hdl:26052
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].991 918 29167 I mtkpower_client: perf_lock_rel, hdl:26051,
tid:29167
05-19 [Link].992 479 1594 I libPowerHal: [PD] scn:1 hdl:26051
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].520 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].521 918 29167 I mtkpower_client: ret_hdl:26053
05-19 [Link].521 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26053 hint:-1
pid:918 duration:0 => ret_hdl:26053
05-19 [Link].521 479 1594 I libPowerHal: [PE] scn:1 hdl:26053
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].623 918 29167 I mtkpower_client: perf_lock_rel, hdl:26053,
tid:29167
05-19 [Link].625 479 1594 I libPowerHal: [PD] scn:1 hdl:26053
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].777 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].779 918 29167 I mtkpower_client: ret_hdl:26054
05-19 [Link].779 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26054 hint:-1
pid:918 duration:0 => ret_hdl:26054
05-19 [Link].779 479 1594 I libPowerHal: [PE] scn:1 hdl:26054
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].864 918 29167 I mtkpower_client: perf_lock_rel, hdl:26054,
tid:29167
05-19 [Link].866 479 1594 I libPowerHal: [PD] scn:1 hdl:26054
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].958 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].959 918 29167 I mtkpower_client: ret_hdl:26055
05-19 [Link].960 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26055 hint:-1
pid:918 duration:0 => ret_hdl:26055
05-19 [Link].960 479 1594 I libPowerHal: [PE] scn:1 hdl:26055
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].033 918 29167 I mtkpower_client: perf_lock_rel, hdl:26055,
tid:29167
05-19 [Link].034 479 1594 I libPowerHal: [PD] scn:1 hdl:26055
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].641 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].642 918 29167 I mtkpower_client: ret_hdl:26056
05-19 [Link].643 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26056 hint:-1
pid:918 duration:0 => ret_hdl:26056
05-19 [Link].643 479 1594 I libPowerHal: [PE] scn:1 hdl:26056
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].741 918 29167 I mtkpower_client: perf_lock_rel, hdl:26056,
tid:29167
05-19 [Link].742 479 1594 I libPowerHal: [PD] scn:1 hdl:26056
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].917 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].918 918 29167 I mtkpower_client: ret_hdl:26057
05-19 [Link].919 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26057 hint:-1
pid:918 duration:0 => ret_hdl:26057
05-19 [Link].919 479 1594 I libPowerHal: [PE] scn:1 hdl:26057
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].996 918 29167 I mtkpower_client: perf_lock_rel, hdl:26057,
tid:29167
05-19 [Link].998 479 1594 I libPowerHal: [PD] scn:1 hdl:26057
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].100 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].101 918 29167 I mtkpower_client: ret_hdl:26059
05-19 [Link].101 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26059 hint:-1
pid:918 duration:0 => ret_hdl:26059
05-19 [Link].101 479 1594 I libPowerHal: [PE] scn:2 hdl:26059
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].237 918 1784 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].238 918 9097 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].243 918 9097 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].244 918 9097 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].245 918 9097 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].246 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].395 918 29210 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].395 918 29210 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].395 918 29210 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].396 918 29210 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].396 918 29210 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 19115
05-19 [Link].396 918 29210 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfbea000
05-19 [Link].396 918 29210 E VDO_LOG : vp9_dec_init() u4Width 832, u4Height
1408, Offset 0, Padding 0
05-19 [Link].399 918 29217 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29217
05-19 [Link].400 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26064 hint:-1
pid:918 duration:0 => ret_hdl:26064
05-19 [Link].400 479 1594 I libPowerHal: [PE] scn:3 hdl:26064
lock_user:[email protected] pid:918 tid:29217 dur:0
05-19 [Link].402 918 29217 I mtkpower_client: ret_hdl:26064
05-19 [Link].455 918 29210 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].455 918 29210 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].455 918 29210 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].455 918 29210 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].455 918 29210 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].478 918 29167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29167
05-19 [Link].480 918 29167 I mtkpower_client: ret_hdl:26065
05-19 [Link].480 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26065 hint:-1
pid:918 duration:0 => ret_hdl:26065
05-19 [Link].480 479 1594 I libPowerHal: [PE] scn:4 hdl:26065
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].582 918 29163 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].598 918 29163 I mtkpower_client: perf_lock_rel, hdl:26065,
tid:29163
05-19 [Link].598 918 29163 I mtkpower_client: perf_lock_rel, hdl:26059,
tid:29163
05-19 [Link].599 918 29163 I mtkpower_client: perf_lock_rel, hdl:26050,
tid:29163
05-19 [Link].599 918 29163 I mtkpower_client: perf_lock_rel, hdl:26049,
tid:29163
05-19 [Link].599 479 1594 I libPowerHal: [PD] scn:4 hdl:26065
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].600 479 1594 I libPowerHal: [PD] scn:2 hdl:26059
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].602 479 1594 I libPowerHal: [PD] scn:0 hdl:26050
lock_user:[email protected] pid:918 tid:29167 dur:0
05-19 [Link].738 918 29216 I mtkpower_client: perf_lock_rel, hdl:26064,
tid:29216
05-19 [Link].738 918 29216 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29216
05-19 [Link].738 479 1594 I libPowerHal: [PD] scn:3 hdl:26064
lock_user:[email protected] pid:918 tid:29217 dur:0
05-19 [Link].739 918 29216 I mtkpower_client: ret_hdl:26066
05-19 [Link].739 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26066 hint:-1
pid:918 duration:0 => ret_hdl:26066
05-19 [Link].739 479 1594 I libPowerHal: [PE] scn:0 hdl:26066
lock_user:[email protected] pid:918 tid:29216 dur:0
05-19 [Link].262 918 1085 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].262 918 1085 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].267 918 1820 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].267 918 1820 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].267 918 1820 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].267 918 1820 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].268 918 1820 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].360 918 29254 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].360 918 29254 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].360 918 29254 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].361 918 29254 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].361 918 29254 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 6157
05-19 [Link].361 918 29254 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe22a6000
05-19 [Link].361 918 29254 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].372 918 29262 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29262
05-19 [Link].373 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26072 hint:-1
pid:918 duration:0 => ret_hdl:26072
05-19 [Link].373 479 1594 I libPowerHal: [PE] scn:3 hdl:26072
lock_user:[email protected] pid:918 tid:29262 dur:0
05-19 [Link].374 918 29262 I mtkpower_client: ret_hdl:26072
05-19 [Link].385 918 29254 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].385 918 29254 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].385 918 29254 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].385 918 29254 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].385 918 29254 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].582 918 29209 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].595 918 29209 I mtkpower_client: perf_lock_rel, hdl:26066,
tid:29209
05-19 [Link].596 479 1594 I libPowerHal: [PD] scn:0 hdl:26066
lock_user:[email protected] pid:918 tid:29216 dur:0
05-19 [Link].597 918 29209 I mtkpower_client: perf_lock_rel, hdl:26064,
tid:29209
05-19 [Link].657 918 29261 I mtkpower_client: perf_lock_rel, hdl:26072,
tid:29261
05-19 [Link].657 918 29261 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29261
05-19 [Link].658 479 1594 I libPowerHal: [PD] scn:3 hdl:26072
lock_user:[email protected] pid:918 tid:29262 dur:0
05-19 [Link].661 918 29261 I mtkpower_client: ret_hdl:26073
05-19 [Link].661 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26073 hint:-1
pid:918 duration:0 => ret_hdl:26073
05-19 [Link].661 479 1594 I libPowerHal: [PE] scn:0 hdl:26073
lock_user:[email protected] pid:918 tid:29261 dur:0
05-19 [Link].026 918 1960 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].026 918 1960 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].029 918 1960 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].029 918 1960 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 1960 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 1960 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 1960 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].065 918 29301 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].066 918 29301 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].066 918 29301 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].067 918 29301 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].067 918 29301 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 19115
05-19 [Link].067 918 29301 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2b34000
05-19 [Link].068 918 29301 E VDO_LOG : vp9_dec_init() u4Width 832, u4Height
1408, Offset 0, Padding 0
05-19 [Link].084 918 29307 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29307
05-19 [Link].084 918 29307 I mtkpower_client: ret_hdl:26079
05-19 [Link].085 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26079 hint:-1
pid:918 duration:0 => ret_hdl:26079
05-19 [Link].085 479 1594 I libPowerHal: [PE] scn:2 hdl:26079
lock_user:[email protected] pid:918 tid:29307 dur:0
05-19 [Link].106 918 29301 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].106 918 29301 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].106 918 29301 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].106 918 29301 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].106 918 29301 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].256 918 29253 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].288 918 29253 I mtkpower_client: perf_lock_rel, hdl:26073,
tid:29253
05-19 [Link].289 918 29253 I mtkpower_client: perf_lock_rel, hdl:26072,
tid:29253
05-19 [Link].290 479 1594 I libPowerHal: [PD] scn:0 hdl:26073
lock_user:[email protected] pid:918 tid:29261 dur:0
05-19 [Link].394 918 29305 I mtkpower_client: perf_lock_rel, hdl:26079,
tid:29305
05-19 [Link].395 918 29305 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29305
05-19 [Link].395 479 1594 I libPowerHal: [PD] scn:2 hdl:26079
lock_user:[email protected] pid:918 tid:29307 dur:0
05-19 [Link].397 918 29305 I mtkpower_client: ret_hdl:26080
05-19 [Link].397 918 29305 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29305
05-19 [Link].397 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26080 hint:-1
pid:918 duration:0 => ret_hdl:26080
05-19 [Link].397 479 1594 I libPowerHal: [PE] scn:0 hdl:26080
lock_user:[email protected] pid:918 tid:29305 dur:0
05-19 [Link].398 918 29305 I mtkpower_client: ret_hdl:26081
05-19 [Link].399 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26081 hint:-1
pid:918 duration:0 => ret_hdl:26081
05-19 [Link].399 479 1594 I libPowerHal: [PE] scn:2 hdl:26081
lock_user:[email protected] pid:918 tid:29305 dur:0
05-19 [Link].484 918 29305 I mtkpower_client: perf_lock_rel, hdl:26081,
tid:29305
05-19 [Link].486 479 1594 I libPowerHal: [PD] scn:2 hdl:26081
lock_user:[email protected] pid:918 tid:29305 dur:0
05-19 [Link].764 918 5724 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].765 918 6021 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].769 918 1088 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].769 918 1088 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].769 918 15680 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].770 918 5724 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].771 918 15680 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].889 918 29371 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].889 918 29371 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].889 918 29371 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].890 918 29371 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].890 918 29371 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 6157
05-19 [Link].890 918 29371 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1871000
05-19 [Link].890 918 29371 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].898 918 29378 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29378
05-19 [Link].901 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26087 hint:-1
pid:918 duration:0 => ret_hdl:26087
05-19 [Link].901 479 1594 I libPowerHal: [PE] scn:2 hdl:26087
lock_user:[email protected] pid:918 tid:29378 dur:0
05-19 [Link].901 918 29378 I mtkpower_client: ret_hdl:26087
05-19 [Link].928 918 29371 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].928 918 29371 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].930 918 29371 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].930 918 29371 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].930 918 29371 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].979 918 29300 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].001 918 29300 I mtkpower_client: perf_lock_rel, hdl:26081,
tid:29300
05-19 [Link].002 918 29300 I mtkpower_client: perf_lock_rel, hdl:26080,
tid:29300
05-19 [Link].002 918 29300 I mtkpower_client: perf_lock_rel, hdl:26079,
tid:29300
05-19 [Link].003 479 1594 I libPowerHal: [PD] scn:0 hdl:26080
lock_user:[email protected] pid:918 tid:29305 dur:0
05-19 [Link].123 918 29377 I mtkpower_client: perf_lock_rel, hdl:26087,
tid:29377
05-19 [Link].123 918 29377 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29377
05-19 [Link].124 479 1594 I libPowerHal: [PD] scn:2 hdl:26087
lock_user:[email protected] pid:918 tid:29378 dur:0
05-19 [Link].124 918 29377 I mtkpower_client: ret_hdl:26088
05-19 [Link].125 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26088 hint:-1
pid:918 duration:0 => ret_hdl:26088
05-19 [Link].125 479 1594 I libPowerHal: [PE] scn:0 hdl:26088
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].255 918 29377 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29377
05-19 [Link].257 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26089 hint:-1
pid:918 duration:0 => ret_hdl:26089
05-19 [Link].257 479 1594 I libPowerHal: [PE] scn:2 hdl:26089
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].258 918 29377 I mtkpower_client: ret_hdl:26089
05-19 [Link].334 918 29377 I mtkpower_client: perf_lock_rel, hdl:26089,
tid:29377
05-19 [Link].336 479 1594 I libPowerHal: [PD] scn:2 hdl:26089
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].318 918 15680 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].318 918 15680 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].328 918 15680 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].328 918 15680 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].329 918 15680 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].329 918 15680 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].330 918 15680 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].331 918 29377 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29377
05-19 [Link].333 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26095 hint:-1
pid:918 duration:0 => ret_hdl:26095
05-19 [Link].333 479 1594 I libPowerHal: [PE] scn:3 hdl:26095
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].335 918 29377 I mtkpower_client: ret_hdl:26095
05-19 [Link].468 918 29429 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].468 918 29429 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].468 918 29429 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].469 918 29429 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].470 918 29429 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 72538
05-19 [Link].470 918 29429 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe245f000
05-19 [Link].470 918 29429 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].487 918 29435 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29435
05-19 [Link].488 918 29435 I mtkpower_client: ret_hdl:26096
05-19 [Link].488 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26096 hint:-1
pid:918 duration:0 => ret_hdl:26096
05-19 [Link].488 479 1594 I libPowerHal: [PE] scn:2 hdl:26096
lock_user:[email protected] pid:918 tid:29435 dur:0
05-19 [Link].502 918 29429 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].502 918 29429 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].502 918 29429 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].502 918 29429 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].503 918 29429 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].577 918 29377 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29377
05-19 [Link].577 918 29377 I mtkpower_client: ret_hdl:26097
05-19 [Link].578 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26097 hint:-1
pid:918 duration:0 => ret_hdl:26097
05-19 [Link].578 479 1594 I libPowerHal: [PE] scn:4 hdl:26097
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].601 918 29370 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].608 918 29370 I mtkpower_client: perf_lock_rel, hdl:26097,
tid:29370
05-19 [Link].608 918 29370 I mtkpower_client: perf_lock_rel, hdl:26095,
tid:29370
05-19 [Link].609 918 29370 I mtkpower_client: perf_lock_rel, hdl:26088,
tid:29370
05-19 [Link].609 918 29370 I mtkpower_client: perf_lock_rel, hdl:26087,
tid:29370
05-19 [Link].609 479 1594 I libPowerHal: [PD] scn:4 hdl:26097
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].611 479 1594 I libPowerHal: [PD] scn:3 hdl:26095
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].613 479 1594 I libPowerHal: [PD] scn:0 hdl:26088
lock_user:[email protected] pid:918 tid:29377 dur:0
05-19 [Link].673 918 29434 I mtkpower_client: perf_lock_rel, hdl:26096,
tid:29434
05-19 [Link].674 918 29434 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29434
05-19 [Link].675 918 29434 I mtkpower_client: ret_hdl:26098
05-19 [Link].676 479 1594 I libPowerHal: [PD] scn:2 hdl:26096
lock_user:[email protected] pid:918 tid:29435 dur:0
05-19 [Link].677 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26098 hint:-1
pid:918 duration:0 => ret_hdl:26098
05-19 [Link].677 479 1594 I libPowerHal: [PE] scn:0 hdl:26098
lock_user:[email protected] pid:918 tid:29434 dur:0
05-19 [Link].588 918 9097 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].588 918 9097 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].596 918 9097 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].596 918 9097 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].596 918 918 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].597 918 918 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].597 918 918 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].741 918 29428 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].799 918 29428 I mtkpower_client: perf_lock_rel, hdl:26098,
tid:29428
05-19 [Link].799 918 29428 I mtkpower_client: perf_lock_rel, hdl:26096,
tid:29428
05-19 [Link].801 479 1594 I libPowerHal: [PD] scn:0 hdl:26098
lock_user:[email protected] pid:918 tid:29434 dur:0
05-19 [Link].801 918 29428 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].802 918 29428 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].802 918 29428 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].803 918 29428 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].806 918 29487 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].807 918 29487 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].807 918 29487 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].807 918 29487 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].807 918 29487 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].808 918 29487 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].808 918 29487 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].808 918 29487 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].016 918 29487 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].016 918 29487 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 83965
05-19 [Link].016 918 29487 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].016 918 29487 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].019 918 29499 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29499
05-19 [Link].020 918 29499 I mtkpower_client: ret_hdl:26107
05-19 [Link].020 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26107 hint:-1
pid:918 duration:0 => ret_hdl:26107
05-19 [Link].021 479 1594 I libPowerHal: [PE] scn:0 hdl:26107
lock_user:[email protected] pid:918 tid:29499 dur:0
05-19 [Link].033 918 29487 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].033 918 29487 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].033 918 29487 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].033 918 29487 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].033 918 29487 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].324 918 29498 I mtkpower_client: perf_lock_rel, hdl:26107,
tid:29498
05-19 [Link].325 918 29498 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29498
05-19 [Link].325 479 1594 I libPowerHal: [PD] scn:0 hdl:26107
lock_user:[email protected] pid:918 tid:29499 dur:0
05-19 [Link].326 918 29498 I mtkpower_client: ret_hdl:26108
05-19 [Link].326 918 29498 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29498
05-19 [Link].326 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26108 hint:-1
pid:918 duration:0 => ret_hdl:26108
05-19 [Link].326 479 1594 I libPowerHal: [PE] scn:2 hdl:26108
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].326 918 29498 I mtkpower_client: ret_hdl:26109
05-19 [Link].327 918 29498 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29498
05-19 [Link].327 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26109 hint:-1
pid:918 duration:0 => ret_hdl:26109
05-19 [Link].327 479 1594 I libPowerHal: [PE] scn:0 hdl:26109
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].327 918 29498 I mtkpower_client: ret_hdl:26110
05-19 [Link].328 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26110 hint:-1
pid:918 duration:0 => ret_hdl:26110
05-19 [Link].328 479 1594 I libPowerHal: [PE] scn:3 hdl:26110
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].407 918 29498 I mtkpower_client: perf_lock_rel, hdl:26110,
tid:29498
05-19 [Link].408 479 1594 I libPowerHal: [PD] scn:3 hdl:26110
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].568 918 29498 I mtkpower_client: perf_lock_rel, hdl:26109,
tid:29498
05-19 [Link].569 479 1594 I libPowerHal: [PD] scn:0 hdl:26109
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].142 918 1088 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].142 918 15680 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].146 918 9097 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].146 918 9097 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].147 918 1088 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].147 918 15680 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].148 918 9097 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].274 918 29536 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].274 918 29536 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].274 918 29536 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].275 918 29536 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].275 918 29536 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 64562
05-19 [Link].275 918 29536 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdde48000
05-19 [Link].275 918 29536 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].277 918 29542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29542
05-19 [Link].278 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26116 hint:-1
pid:918 duration:0 => ret_hdl:26116
05-19 [Link].278 479 1594 I libPowerHal: [PE] scn:1 hdl:26116
lock_user:[email protected] pid:918 tid:29542 dur:0
05-19 [Link].279 918 29542 I mtkpower_client: ret_hdl:26116
05-19 [Link].295 918 29536 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].295 918 29536 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].295 918 29536 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].295 918 29536 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].295 918 29536 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].394 918 29498 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29498
05-19 [Link].395 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26117 hint:-1
pid:918 duration:0 => ret_hdl:26117
05-19 [Link].395 479 1594 I libPowerHal: [PE] scn:3 hdl:26117
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].397 918 29498 I mtkpower_client: ret_hdl:26117
05-19 [Link].451 918 29486 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].472 918 29486 I mtkpower_client: perf_lock_rel, hdl:26110,
tid:29486
05-19 [Link].472 918 29486 I mtkpower_client: perf_lock_rel, hdl:26117,
tid:29486
05-19 [Link].472 918 29486 I mtkpower_client: perf_lock_rel, hdl:26108,
tid:29486
05-19 [Link].472 918 29486 I mtkpower_client: perf_lock_rel, hdl:26107,
tid:29486
05-19 [Link].474 479 1594 I libPowerHal: [PD] scn:3 hdl:26117
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].477 479 1594 I libPowerHal: [PD] scn:2 hdl:26108
lock_user:[email protected] pid:918 tid:29498 dur:0
05-19 [Link].545 918 29541 I mtkpower_client: perf_lock_rel, hdl:26116,
tid:29541
05-19 [Link].545 918 29541 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29541
05-19 [Link].545 479 1594 I libPowerHal: [PD] scn:1 hdl:26116
lock_user:[email protected] pid:918 tid:29542 dur:0
05-19 [Link].547 918 29541 I mtkpower_client: ret_hdl:26118
05-19 [Link].547 918 29541 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29541
05-19 [Link].547 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26118 hint:-1
pid:918 duration:0 => ret_hdl:26118
05-19 [Link].547 479 1594 I libPowerHal: [PE] scn:1 hdl:26118
lock_user:[email protected] pid:918 tid:29541 dur:0
05-19 [Link].548 918 29541 I mtkpower_client: ret_hdl:26119
05-19 [Link].548 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26119 hint:-1
pid:918 duration:0 => ret_hdl:26119
05-19 [Link].548 479 1594 I libPowerHal: [PE] scn:2 hdl:26119
lock_user:[email protected] pid:918 tid:29541 dur:0
05-19 [Link].901 918 29541 I mtkpower_client: perf_lock_rel, hdl:26119,
tid:29541
05-19 [Link].903 479 1594 I libPowerHal: [PD] scn:2 hdl:26119
lock_user:[email protected] pid:918 tid:29541 dur:0
05-19 [Link].277 918 5724 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].277 918 5724 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].280 918 5724 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].281 918 5724 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].281 918 5724 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].281 918 5724 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].282 918 5724 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].347 918 29582 E VDO_LOG : GetDecoderAPI hWrapper 0xea2aa810
05-19 [Link].347 918 29582 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].347 918 29582 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].348 918 29582 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].348 918 29582 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 9487
05-19 [Link].348 918 29582 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].348 918 29582 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].352 918 29588 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29588
05-19 [Link].354 918 29588 I mtkpower_client: ret_hdl:26125
05-19 [Link].354 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26125 hint:-1
pid:918 duration:0 => ret_hdl:26125
05-19 [Link].354 479 1594 I libPowerHal: [PE] scn:2 hdl:26125
lock_user:[email protected] pid:918 tid:29588 dur:0
05-19 [Link].362 918 29582 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].362 918 29582 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].362 918 29582 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].362 918 29582 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].362 918 29582 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].518 918 29535 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].529 918 29535 I mtkpower_client: perf_lock_rel, hdl:26119,
tid:29535
05-19 [Link].529 918 29535 I mtkpower_client: perf_lock_rel, hdl:26118,
tid:29535
05-19 [Link].529 918 29535 I mtkpower_client: perf_lock_rel, hdl:26116,
tid:29535
05-19 [Link].530 479 1594 I libPowerHal: [PD] scn:1 hdl:26118
lock_user:[email protected] pid:918 tid:29541 dur:0
05-19 [Link].567 918 29587 I mtkpower_client: perf_lock_rel, hdl:26125,
tid:29587
05-19 [Link].568 918 29587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29587
05-19 [Link].568 479 1594 I libPowerHal: [PD] scn:2 hdl:26125
lock_user:[email protected] pid:918 tid:29588 dur:0
05-19 [Link].569 918 29587 I mtkpower_client: ret_hdl:26126
05-19 [Link].571 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26126 hint:-1
pid:918 duration:0 => ret_hdl:26126
05-19 [Link].571 479 1594 I libPowerHal: [PE] scn:1 hdl:26126
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].861 918 1820 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].861 918 1820 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].886 918 1820 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].886 918 1820 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].888 918 1820 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].888 918 1820 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].889 918 1820 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].060 918 29625 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].060 918 29625 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].060 918 29625 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].061 918 29625 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].061 918 29625 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 35743
05-19 [Link].061 918 29625 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde766000
05-19 [Link].061 918 29625 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].069 918 29631 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29631
05-19 [Link].072 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26130 hint:-1
pid:918 duration:0 => ret_hdl:26130
05-19 [Link].072 479 1594 I libPowerHal: [PE] scn:2 hdl:26130
lock_user:[email protected] pid:918 tid:29631 dur:0
05-19 [Link].073 918 29631 I mtkpower_client: ret_hdl:26130
05-19 [Link].102 918 29625 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].102 918 29625 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].102 918 29625 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].102 918 29625 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].102 918 29625 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].105 918 29587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29587
05-19 [Link].107 918 29587 I mtkpower_client: ret_hdl:26132
05-19 [Link].107 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26132 hint:-1
pid:918 duration:0 => ret_hdl:26132
05-19 [Link].107 479 1594 I libPowerHal: [PE] scn:0 hdl:26132
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].299 918 29624 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].306 918 29624 I mtkpower_client: perf_lock_rel, hdl:26130,
tid:29624
05-19 [Link].308 479 1594 I libPowerHal: [PD] scn:2 hdl:26130
lock_user:[email protected] pid:918 tid:29631 dur:0
05-19 [Link].380 918 29587 I mtkpower_client: perf_lock_rel, hdl:26132,
tid:29587
05-19 [Link].380 479 1594 I libPowerHal: [PD] scn:0 hdl:26132
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].203 918 1088 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].203 918 32761 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].207 918 918 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].207 918 918 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].207 918 11716 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].208 918 1065 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].208 918 1064 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].267 918 29673 E VDO_LOG : GetDecoderAPI hWrapper 0xea033810
05-19 [Link].267 918 29673 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].268 918 29673 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].271 918 29673 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].271 918 29673 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 35743
05-19 [Link].271 918 29673 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde566000
05-19 [Link].271 918 29673 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].277 918 29679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29679
05-19 [Link].280 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26138 hint:-1
pid:918 duration:0 => ret_hdl:26138
05-19 [Link].280 479 1594 I libPowerHal: [PE] scn:2 hdl:26138
lock_user:[email protected] pid:918 tid:29679 dur:0
05-19 [Link].280 918 29679 I mtkpower_client: ret_hdl:26138
05-19 [Link].336 918 29673 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].336 918 29673 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].337 918 29673 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].337 918 29673 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].337 918 29673 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].497 918 29587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29587
05-19 [Link].499 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26139 hint:-1
pid:918 duration:0 => ret_hdl:26139
05-19 [Link].499 479 1594 I libPowerHal: [PE] scn:3 hdl:26139
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].499 918 29587 I mtkpower_client: ret_hdl:26139
05-19 [Link].499 918 29587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29587
05-19 [Link].500 918 29587 I mtkpower_client: ret_hdl:26140
05-19 [Link].500 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26140 hint:-1
pid:918 duration:0 => ret_hdl:26140
05-19 [Link].500 479 1594 I libPowerHal: [PE] scn:4 hdl:26140
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].521 918 29581 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].546 918 29581 I mtkpower_client: perf_lock_rel, hdl:26140,
tid:29581
05-19 [Link].547 918 29581 I mtkpower_client: perf_lock_rel, hdl:26139,
tid:29581
05-19 [Link].549 918 29581 I mtkpower_client: perf_lock_rel, hdl:26126,
tid:29581
05-19 [Link].549 918 29581 I mtkpower_client: perf_lock_rel, hdl:26125,
tid:29581
05-19 [Link].551 479 1594 I libPowerHal: [PD] scn:4 hdl:26140
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].553 479 1594 I libPowerHal: [PD] scn:3 hdl:26139
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].554 479 1594 I libPowerHal: [PD] scn:1 hdl:26126
lock_user:[email protected] pid:918 tid:29587 dur:0
05-19 [Link].616 918 29678 I mtkpower_client: perf_lock_rel, hdl:26138,
tid:29678
05-19 [Link].616 918 29678 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29678
05-19 [Link].617 479 1594 I libPowerHal: [PD] scn:2 hdl:26138
lock_user:[email protected] pid:918 tid:29679 dur:0
05-19 [Link].621 918 29678 I mtkpower_client: ret_hdl:26141
05-19 [Link].621 918 29678 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29678
05-19 [Link].622 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26141 hint:-1
pid:918 duration:0 => ret_hdl:26141
05-19 [Link].622 479 1594 I libPowerHal: [PE] scn:1 hdl:26141
lock_user:[email protected] pid:918 tid:29678 dur:0
05-19 [Link].622 918 29678 I mtkpower_client: ret_hdl:26142
05-19 [Link].622 918 29678 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29678
05-19 [Link].625 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26142 hint:-1
pid:918 duration:0 => ret_hdl:26142
05-19 [Link].625 479 1594 I libPowerHal: [PE] scn:2 hdl:26142
lock_user:[email protected] pid:918 tid:29678 dur:0
05-19 [Link].627 918 29678 I mtkpower_client: ret_hdl:26143
05-19 [Link].629 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26143 hint:-1
pid:918 duration:0 => ret_hdl:26143
05-19 [Link].629 479 1594 I libPowerHal: [PE] scn:3 hdl:26143
lock_user:[email protected] pid:918 tid:29678 dur:0
05-19 [Link].663 918 29678 I mtkpower_client: perf_lock_rel, hdl:26143,
tid:29678
05-19 [Link].663 918 29678 I mtkpower_client: perf_lock_rel, hdl:26142,
tid:29678
05-19 [Link].664 479 1594 I libPowerHal: [PD] scn:3 hdl:26143
lock_user:[email protected] pid:918 tid:29678 dur:0
05-19 [Link].665 479 1594 I libPowerHal: [PD] scn:2 hdl:26142
lock_user:[email protected] pid:918 tid:29678 dur:0
05-19 [Link].049 918 1088 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].049 918 1088 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].052 918 1088 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].052 918 1088 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].052 918 1088 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].052 918 1088 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].053 918 1088 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].084 918 29717 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].084 918 29717 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].084 918 29717 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].087 918 29717 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].087 918 29717 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17465
05-19 [Link].087 918 29717 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].087 918 29717 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].090 918 29723 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29723
05-19 [Link].092 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26147 hint:-1
pid:918 duration:0 => ret_hdl:26147
05-19 [Link].092 479 1594 I libPowerHal: [PE] scn:0 hdl:26147
lock_user:[email protected] pid:918 tid:29723 dur:0
05-19 [Link].092 918 29723 I mtkpower_client: ret_hdl:26147
05-19 [Link].099 918 29717 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].100 918 29717 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].100 918 29717 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].100 918 29717 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].100 918 29717 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].606 918 29672 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].629 918 29672 I mtkpower_client: perf_lock_rel, hdl:26143,
tid:29672
05-19 [Link].630 918 29672 I mtkpower_client: perf_lock_rel, hdl:26142,
tid:29672
05-19 [Link].630 918 29672 I mtkpower_client: perf_lock_rel, hdl:26141,
tid:29672
05-19 [Link].630 918 29672 I mtkpower_client: perf_lock_rel, hdl:26138,
tid:29672
05-19 [Link].632 479 1594 I libPowerHal: [PD] scn:1 hdl:26141
lock_user:[email protected] pid:918 tid:29678 dur:0
05-19 [Link].666 918 29722 I mtkpower_client: perf_lock_rel, hdl:26147,
tid:29722
05-19 [Link].666 918 29722 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29722
05-19 [Link].667 479 1594 I libPowerHal: [PD] scn:0 hdl:26147
lock_user:[email protected] pid:918 tid:29723 dur:0
05-19 [Link].671 918 29722 I mtkpower_client: ret_hdl:26150
05-19 [Link].671 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26150 hint:-1
pid:918 duration:0 => ret_hdl:26150
05-19 [Link].671 479 1594 I libPowerHal: [PE] scn:1 hdl:26150
lock_user:[email protected] pid:918 tid:29722 dur:0
05-19 [Link].243 918 918 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].243 918 15680 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1820 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].247 918 1820 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].248 918 1820 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].248 918 13399 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].249 918 1088 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].285 918 29766 E VDO_LOG : GetDecoderAPI hWrapper 0xea033810
05-19 [Link].285 918 29766 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].285 918 29766 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].286 918 29766 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].287 918 29766 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 12852
05-19 [Link].287 918 29766 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf073000
05-19 [Link].287 918 29766 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].292 918 29771 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29771
05-19 [Link].293 918 29771 I mtkpower_client: ret_hdl:26154
05-19 [Link].295 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26154 hint:-1
pid:918 duration:0 => ret_hdl:26154
05-19 [Link].295 479 1594 I libPowerHal: [PE] scn:2 hdl:26154
lock_user:[email protected] pid:918 tid:29771 dur:0
05-19 [Link].317 918 29766 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].317 918 29766 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].317 918 29766 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].317 918 29766 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].318 918 29766 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].633 918 29770 I mtkpower_client: perf_lock_rel, hdl:26154,
tid:29770
05-19 [Link].634 918 29770 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29770
05-19 [Link].636 479 1594 I libPowerHal: [PD] scn:2 hdl:26154
lock_user:[email protected] pid:918 tid:29771 dur:0
05-19 [Link].637 918 29770 I mtkpower_client: ret_hdl:26157
05-19 [Link].637 918 29770 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29770
05-19 [Link].638 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26157 hint:-1
pid:918 duration:0 => ret_hdl:26157
05-19 [Link].638 479 1594 I libPowerHal: [PE] scn:2 hdl:26157
lock_user:[email protected] pid:918 tid:29770 dur:0
05-19 [Link].640 918 29770 I mtkpower_client: ret_hdl:26158
05-19 [Link].641 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26158 hint:-1
pid:918 duration:0 => ret_hdl:26158
05-19 [Link].641 479 1594 I libPowerHal: [PE] scn:3 hdl:26158
lock_user:[email protected] pid:918 tid:29770 dur:0
05-19 [Link].646 918 29716 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].653 918 29716 I mtkpower_client: perf_lock_rel, hdl:26150,
tid:29716
05-19 [Link].654 918 29716 I mtkpower_client: perf_lock_rel, hdl:26147,
tid:29716
05-19 [Link].655 479 1594 I libPowerHal: [PD] scn:1 hdl:26150
lock_user:[email protected] pid:918 tid:29722 dur:0
05-19 [Link].894 918 29770 I mtkpower_client: perf_lock_rel, hdl:26158,
tid:29770
05-19 [Link].895 479 1594 I libPowerHal: [PD] scn:3 hdl:26158
lock_user:[email protected] pid:918 tid:29770 dur:0
05-19 [Link].161 918 1064 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].161 918 13399 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].165 918 1085 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].165 918 1085 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].165 918 13399 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].166 918 11716 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].167 918 1820 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].234 918 29818 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].235 918 29818 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].235 918 29818 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].236 918 29818 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].236 918 29818 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 52690
05-19 [Link].236 918 29818 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].236 918 29818 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].242 918 29824 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29824
05-19 [Link].242 918 29824 I mtkpower_client: ret_hdl:26164
05-19 [Link].243 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26164 hint:-1
pid:918 duration:0 => ret_hdl:26164
05-19 [Link].243 479 1594 I libPowerHal: [PE] scn:0 hdl:26164
lock_user:[email protected] pid:918 tid:29824 dur:0
05-19 [Link].246 918 29765 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].282 918 29765 I mtkpower_client: perf_lock_rel, hdl:26158,
tid:29765
05-19 [Link].282 918 29765 I mtkpower_client: perf_lock_rel, hdl:26157,
tid:29765
05-19 [Link].282 918 29765 I mtkpower_client: perf_lock_rel, hdl:26154,
tid:29765
05-19 [Link].284 479 1594 I libPowerHal: [PD] scn:2 hdl:26157
lock_user:[email protected] pid:918 tid:29770 dur:0
05-19 [Link].294 918 29818 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].294 918 29818 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].294 918 29818 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].294 918 29818 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].295 918 29818 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].516 918 29823 I mtkpower_client: perf_lock_rel, hdl:26164,
tid:29823
05-19 [Link].516 918 29823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29823
05-19 [Link].517 479 1594 I libPowerHal: [PD] scn:0 hdl:26164
lock_user:[email protected] pid:918 tid:29824 dur:0
05-19 [Link].519 918 29823 I mtkpower_client: ret_hdl:26165
05-19 [Link].520 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26165 hint:-1
pid:918 duration:0 => ret_hdl:26165
05-19 [Link].520 479 1594 I libPowerHal: [PE] scn:2 hdl:26165
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].819 918 1088 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].819 918 1064 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].825 918 5020 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].825 918 5020 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 32761 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 1088 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 32761 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].884 918 29865 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb8810
05-19 [Link].884 918 29865 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].884 918 29865 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].888 918 29865 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].888 918 29865 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 98708
05-19 [Link].889 918 29865 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xddbfd000
05-19 [Link].889 918 29865 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].898 918 29871 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29871
05-19 [Link].900 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26171 hint:-1
pid:918 duration:0 => ret_hdl:26171
05-19 [Link].900 479 1594 I libPowerHal: [PE] scn:1 hdl:26171
lock_user:[email protected] pid:918 tid:29871 dur:0
05-19 [Link].902 918 29871 I mtkpower_client: ret_hdl:26171
05-19 [Link].915 918 29865 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].915 918 29865 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].915 918 29865 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].915 918 29865 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].915 918 29865 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].946 918 29823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29823
05-19 [Link].946 918 29823 I mtkpower_client: ret_hdl:26172
05-19 [Link].946 918 29823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29823
05-19 [Link].946 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26172 hint:-1
pid:918 duration:0 => ret_hdl:26172
05-19 [Link].947 479 1594 I libPowerHal: [PE] scn:3 hdl:26172
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].947 918 29823 I mtkpower_client: ret_hdl:26173
05-19 [Link].947 918 29823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29823
05-19 [Link].954 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26173 hint:-1
pid:918 duration:0 => ret_hdl:26173
05-19 [Link].954 479 1594 I libPowerHal: [PE] scn:4 hdl:26173
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].955 918 29823 I mtkpower_client: ret_hdl:26174
05-19 [Link].955 918 29823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29823
05-19 [Link].958 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26174 hint:-1
pid:918 duration:0 => ret_hdl:26174
05-19 [Link].958 479 1594 I libPowerHal: [PE] scn:5 hdl:26174
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].959 918 29823 I mtkpower_client: ret_hdl:26175
05-19 [Link].960 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26175 hint:-1
pid:918 duration:0 => ret_hdl:26175
05-19 [Link].960 479 1594 I libPowerHal: [PE] scn:6 hdl:26175
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].083 918 29823 I mtkpower_client: perf_lock_rel, hdl:26175,
tid:29823
05-19 [Link].083 918 29823 I mtkpower_client: perf_lock_rel, hdl:26174,
tid:29823
05-19 [Link].084 479 1594 I libPowerHal: [PD] scn:6 hdl:26175
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].085 479 1594 I libPowerHal: [PD] scn:5 hdl:26174
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].127 918 29817 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].143 918 29817 I mtkpower_client: perf_lock_rel, hdl:26175,
tid:29817
05-19 [Link].144 918 29817 I mtkpower_client: perf_lock_rel, hdl:26174,
tid:29817
05-19 [Link].145 918 29817 I mtkpower_client: perf_lock_rel, hdl:26173,
tid:29817
05-19 [Link].145 918 29817 I mtkpower_client: perf_lock_rel, hdl:26172,
tid:29817
05-19 [Link].145 918 29817 I mtkpower_client: perf_lock_rel, hdl:26165,
tid:29817
05-19 [Link].145 918 29817 I mtkpower_client: perf_lock_rel, hdl:26164,
tid:29817
05-19 [Link].146 479 1594 I libPowerHal: [PD] scn:4 hdl:26173
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].148 479 1594 I libPowerHal: [PD] scn:3 hdl:26172
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].150 479 1594 I libPowerHal: [PD] scn:2 hdl:26165
lock_user:[email protected] pid:918 tid:29823 dur:0
05-19 [Link].155 918 29870 I mtkpower_client: perf_lock_rel, hdl:26171,
tid:29870
05-19 [Link].156 918 29870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29870
05-19 [Link].156 479 1594 I libPowerHal: [PD] scn:1 hdl:26171
lock_user:[email protected] pid:918 tid:29871 dur:0
05-19 [Link].157 918 29870 I mtkpower_client: ret_hdl:26176
05-19 [Link].157 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26176 hint:-1
pid:918 duration:0 => ret_hdl:26176
05-19 [Link].158 479 1594 I libPowerHal: [PE] scn:2 hdl:26176
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].587 918 29870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29870
05-19 [Link].589 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26180 hint:-1
pid:918 duration:0 => ret_hdl:26180
05-19 [Link].589 479 1594 I libPowerHal: [PE] scn:4 hdl:26180
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].591 918 29870 I mtkpower_client: ret_hdl:26180
05-19 [Link].948 918 29870 I mtkpower_client: perf_lock_rel, hdl:26180,
tid:29870
05-19 [Link].949 479 1594 I libPowerHal: [PD] scn:4 hdl:26180
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].896 918 29870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29870
05-19 [Link].897 918 29870 I mtkpower_client: ret_hdl:26182
05-19 [Link].897 918 29870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29870
05-19 [Link].897 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26182 hint:-1
pid:918 duration:0 => ret_hdl:26182
05-19 [Link].897 479 1594 I libPowerHal: [PE] scn:0 hdl:26182
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].899 918 29870 I mtkpower_client: ret_hdl:26183
05-19 [Link].900 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26183 hint:-1
pid:918 duration:0 => ret_hdl:26183
05-19 [Link].900 479 1594 I libPowerHal: [PE] scn:1 hdl:26183
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].986 918 29870 I mtkpower_client: perf_lock_rel, hdl:26183,
tid:29870
05-19 [Link].988 479 1594 I libPowerHal: [PD] scn:1 hdl:26183
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].068 918 29870 I mtkpower_client: perf_lock_rel, hdl:26182,
tid:29870
05-19 [Link].070 479 1594 I libPowerHal: [PD] scn:0 hdl:26182
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].391 918 29870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29870
05-19 [Link].392 918 29870 I mtkpower_client: ret_hdl:26184
05-19 [Link].392 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26184 hint:-1
pid:918 duration:0 => ret_hdl:26184
05-19 [Link].392 479 1594 I libPowerHal: [PE] scn:0 hdl:26184
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].603 918 29870 I mtkpower_client: perf_lock_rel, hdl:26184,
tid:29870
05-19 [Link].605 479 1594 I libPowerHal: [PD] scn:0 hdl:26184
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].785 918 29870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29870
05-19 [Link].786 918 29870 I mtkpower_client: ret_hdl:26188
05-19 [Link].786 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26188 hint:-1
pid:918 duration:0 => ret_hdl:26188
05-19 [Link].786 479 1594 I libPowerHal: [PE] scn:0 hdl:26188
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].989 918 29870 I mtkpower_client: perf_lock_rel, hdl:26188,
tid:29870
05-19 [Link].990 479 1594 I libPowerHal: [PD] scn:0 hdl:26188
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].292 918 29864 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].310 918 29864 I mtkpower_client: perf_lock_rel, hdl:26183,
tid:29864
05-19 [Link].310 918 29864 I mtkpower_client: perf_lock_rel, hdl:26188,
tid:29864
05-19 [Link].310 918 29864 I mtkpower_client: perf_lock_rel, hdl:26176,
tid:29864
05-19 [Link].310 918 29864 I mtkpower_client: perf_lock_rel, hdl:26171,
tid:29864
05-19 [Link].311 918 29864 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].312 479 1594 I libPowerHal: [PD] scn:2 hdl:26176
lock_user:[email protected] pid:918 tid:29870 dur:0
05-19 [Link].312 918 29864 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].312 918 29864 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].312 918 29864 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].775 918 1088 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].775 918 1088 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].789 918 1784 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].789 918 1784 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].790 918 1784 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].790 918 1784 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].792 918 1784 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].847 918 29934 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].847 918 29934 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].848 918 29934 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].848 918 29934 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].848 918 29934 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].849 918 29934 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].849 918 29934 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].850 918 29934 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].860 918 29934 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].861 918 29934 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 83011
05-19 [Link].861 918 29934 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].861 918 29934 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].871 918 29940 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29940
05-19 [Link].872 918 29940 I mtkpower_client: ret_hdl:26196
05-19 [Link].872 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26196 hint:-1
pid:918 duration:0 => ret_hdl:26196
05-19 [Link].873 479 1594 I libPowerHal: [PE] scn:0 hdl:26196
lock_user:[email protected] pid:918 tid:29940 dur:0
05-19 [Link].879 918 29934 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].879 918 29934 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].879 918 29934 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].879 918 29934 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].879 918 29934 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].140 918 29939 I mtkpower_client: perf_lock_rel, hdl:26196,
tid:29939
05-19 [Link].140 918 29939 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29939
05-19 [Link].141 479 1594 I libPowerHal: [PD] scn:0 hdl:26196
lock_user:[email protected] pid:918 tid:29940 dur:0
05-19 [Link].142 918 29939 I mtkpower_client: ret_hdl:26197
05-19 [Link].142 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26197 hint:-1
pid:918 duration:0 => ret_hdl:26197
05-19 [Link].142 479 1594 I libPowerHal: [PE] scn:2 hdl:26197
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].383 918 29939 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29939
05-19 [Link].384 918 29939 I mtkpower_client: ret_hdl:26198
05-19 [Link].387 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26198 hint:-1
pid:918 duration:0 => ret_hdl:26198
05-19 [Link].387 479 1594 I libPowerHal: [PE] scn:0 hdl:26198
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].472 918 29939 I mtkpower_client: perf_lock_rel, hdl:26198,
tid:29939
05-19 [Link].473 479 1594 I libPowerHal: [PD] scn:0 hdl:26198
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].877 918 1784 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].877 918 1784 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].882 918 5058 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].882 918 5058 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].885 918 5058 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].885 918 5058 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].885 918 5058 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].932 918 29976 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].932 918 29976 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].932 918 29976 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].933 918 29976 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].933 918 29976 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 4659
05-19 [Link].933 918 29976 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde9d8000
05-19 [Link].933 918 29976 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].939 918 29980 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29980
05-19 [Link].940 918 29980 I mtkpower_client: ret_hdl:26202
05-19 [Link].940 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26202 hint:-1
pid:918 duration:0 => ret_hdl:26202
05-19 [Link].941 479 1594 I libPowerHal: [PE] scn:1 hdl:26202
lock_user:[email protected] pid:918 tid:29980 dur:0
05-19 [Link].953 918 29976 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].953 918 29976 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].953 918 29976 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].953 918 29976 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].954 918 29976 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].981 918 29939 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29939
05-19 [Link].984 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26203 hint:-1
pid:918 duration:0 => ret_hdl:26203
05-19 [Link].984 479 1594 I libPowerHal: [PE] scn:4 hdl:26203
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].986 918 29939 I mtkpower_client: ret_hdl:26203
05-19 [Link].986 918 29939 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29939
05-19 [Link].987 918 29939 I mtkpower_client: ret_hdl:26204
05-19 [Link].988 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26204 hint:-1
pid:918 duration:0 => ret_hdl:26204
05-19 [Link].988 479 1594 I libPowerHal: [PE] scn:5 hdl:26204
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].097 918 29939 I mtkpower_client: perf_lock_rel, hdl:26204,
tid:29939
05-19 [Link].098 479 1594 I libPowerHal: [PD] scn:5 hdl:26204
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].160 918 29939 I mtkpower_client: perf_lock_rel, hdl:26203,
tid:29939
05-19 [Link].160 479 1594 I libPowerHal: [PD] scn:4 hdl:26203
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].099 918 29979 I mtkpower_client: perf_lock_rel, hdl:26202,
tid:29979
05-19 [Link].100 918 29979 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:29979
05-19 [Link].100 479 1594 I libPowerHal: [PD] scn:1 hdl:26202
lock_user:[email protected] pid:918 tid:29980 dur:0
05-19 [Link].101 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26207 hint:-1
pid:918 duration:0 => ret_hdl:26207
05-19 [Link].101 479 1594 I libPowerHal: [PE] scn:1 hdl:26207
lock_user:[email protected] pid:918 tid:29979 dur:0
05-19 [Link].102 918 29979 I mtkpower_client: ret_hdl:26207
05-19 [Link].224 918 29933 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].256 918 29933 I mtkpower_client: perf_lock_rel, hdl:26204,
tid:29933
05-19 [Link].257 918 29933 I mtkpower_client: perf_lock_rel, hdl:26203,
tid:29933
05-19 [Link].257 918 29933 I mtkpower_client: perf_lock_rel, hdl:26197,
tid:29933
05-19 [Link].257 918 29933 I mtkpower_client: perf_lock_rel, hdl:26196,
tid:29933
05-19 [Link].261 479 1594 I libPowerHal: [PD] scn:2 hdl:26197
lock_user:[email protected] pid:918 tid:29939 dur:0
05-19 [Link].916 918 1784 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].917 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].919 918 1784 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].919 918 1784 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].920 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].920 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].920 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].008 918 30022 E VDO_LOG : GetDecoderAPI hWrapper 0xea2aa810
05-19 [Link].009 918 30022 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].009 918 30022 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].009 918 30022 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].009 918 30022 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 36433
05-19 [Link].009 918 30022 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3d8e000
05-19 [Link].009 918 30022 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].015 918 30028 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30028
05-19 [Link].018 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26211 hint:-1
pid:918 duration:0 => ret_hdl:26211
05-19 [Link].018 479 1594 I libPowerHal: [PE] scn:0 hdl:26211
lock_user:[email protected] pid:918 tid:30028 dur:0
05-19 [Link].018 918 30028 I mtkpower_client: ret_hdl:26211
05-19 [Link].078 918 30022 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].078 918 30022 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].078 918 30022 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].078 918 30022 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].078 918 30022 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].395 918 29975 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].407 918 29975 I mtkpower_client: perf_lock_rel, hdl:26207,
tid:29975
05-19 [Link].410 479 1594 I libPowerHal: [PD] scn:1 hdl:26207
lock_user:[email protected] pid:918 tid:29979 dur:0
05-19 [Link].411 918 29975 I mtkpower_client: perf_lock_rel, hdl:26202,
tid:29975
05-19 [Link].427 918 30027 I mtkpower_client: perf_lock_rel, hdl:26211,
tid:30027
05-19 [Link].428 918 30027 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30027
05-19 [Link].429 479 1594 I libPowerHal: [PD] scn:0 hdl:26211
lock_user:[email protected] pid:918 tid:30028 dur:0
05-19 [Link].430 918 30027 I mtkpower_client: ret_hdl:26214
05-19 [Link].431 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26214 hint:-1
pid:918 duration:0 => ret_hdl:26214
05-19 [Link].431 479 1594 I libPowerHal: [PE] scn:0 hdl:26214
lock_user:[email protected] pid:918 tid:30027 dur:0
05-19 [Link].276 918 6021 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].277 918 6021 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].281 918 5724 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].282 918 5724 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].282 918 5724 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].282 918 11716 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].283 918 6021 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].368 918 30069 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].368 918 30069 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].368 918 30069 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].369 918 30069 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].369 918 30069 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40480
05-19 [Link].369 918 30069 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf03a000
05-19 [Link].369 918 30069 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].378 918 30075 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30075
05-19 [Link].379 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26220 hint:-1
pid:918 duration:0 => ret_hdl:26220
05-19 [Link].379 479 1594 I libPowerHal: [PE] scn:2 hdl:26220
lock_user:[email protected] pid:918 tid:30075 dur:0
05-19 [Link].380 918 30075 I mtkpower_client: ret_hdl:26220
05-19 [Link].399 918 30069 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].399 918 30069 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].399 918 30069 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].399 918 30069 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].399 918 30069 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].491 918 30021 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].503 918 30021 I mtkpower_client: perf_lock_rel, hdl:26214,
tid:30021
05-19 [Link].504 918 30021 I mtkpower_client: perf_lock_rel, hdl:26211,
tid:30021
05-19 [Link].504 479 1594 I libPowerHal: [PD] scn:0 hdl:26214
lock_user:[email protected] pid:918 tid:30027 dur:0
05-19 [Link].727 918 30074 I mtkpower_client: perf_lock_rel, hdl:26220,
tid:30074
05-19 [Link].728 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].729 479 1594 I libPowerHal: [PD] scn:2 hdl:26220
lock_user:[email protected] pid:918 tid:30075 dur:0
05-19 [Link].730 918 30074 I mtkpower_client: ret_hdl:26221
05-19 [Link].730 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].731 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26221 hint:-1
pid:918 duration:0 => ret_hdl:26221
05-19 [Link].731 479 1594 I libPowerHal: [PE] scn:0 hdl:26221
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].732 918 30074 I mtkpower_client: ret_hdl:26222
05-19 [Link].732 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].735 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26222 hint:-1
pid:918 duration:0 => ret_hdl:26222
05-19 [Link].735 479 1594 I libPowerHal: [PE] scn:2 hdl:26222
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].738 918 30074 I mtkpower_client: ret_hdl:26223
05-19 [Link].738 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].740 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26223 hint:-1
pid:918 duration:0 => ret_hdl:26223
05-19 [Link].740 479 1594 I libPowerHal: [PE] scn:3 hdl:26223
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].741 918 30074 I mtkpower_client: ret_hdl:26224
05-19 [Link].741 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26224 hint:-1
pid:918 duration:0 => ret_hdl:26224
05-19 [Link].741 479 1594 I libPowerHal: [PE] scn:4 hdl:26224
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].840 918 30074 I mtkpower_client: perf_lock_rel, hdl:26224,
tid:30074
05-19 [Link].842 479 1594 I libPowerHal: [PD] scn:4 hdl:26224
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].006 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].007 918 30074 I mtkpower_client: ret_hdl:26228
05-19 [Link].007 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26228 hint:-1
pid:918 duration:0 => ret_hdl:26228
05-19 [Link].007 479 1594 I libPowerHal: [PE] scn:6 hdl:26228
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].090 918 32761 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].090 918 32761 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].100 918 32761 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].100 918 32761 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].101 918 32761 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].101 918 32761 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].102 918 32761 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].164 918 30117 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].164 918 30117 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].164 918 30117 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].165 918 30117 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].165 918 30117 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43075
05-19 [Link].165 918 30117 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].165 918 30117 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].168 918 30125 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30125
05-19 [Link].171 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26231 hint:-1
pid:918 duration:0 => ret_hdl:26231
05-19 [Link].171 479 1594 I libPowerHal: [PE] scn:1 hdl:26231
lock_user:[email protected] pid:918 tid:30125 dur:0
05-19 [Link].172 918 30125 I mtkpower_client: ret_hdl:26231
05-19 [Link].177 918 30117 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].177 918 30117 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].177 918 30117 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].177 918 30117 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].177 918 30117 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].240 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].241 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26232 hint:-1
pid:918 duration:0 => ret_hdl:26232
05-19 [Link].241 479 1594 I libPowerHal: [PE] scn:4 hdl:26232
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].241 918 30074 I mtkpower_client: ret_hdl:26232
05-19 [Link].241 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].242 918 30074 I mtkpower_client: ret_hdl:26233
05-19 [Link].242 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].243 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26233 hint:-1
pid:918 duration:0 => ret_hdl:26233
05-19 [Link].243 479 1594 I libPowerHal: [PE] scn:5 hdl:26233
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].244 918 30074 I mtkpower_client: ret_hdl:26234
05-19 [Link].244 918 30074 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30074
05-19 [Link].245 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:26234 hint:-1
pid:918 duration:0 => ret_hdl:26234
05-19 [Link].245 479 1594 I libPowerHal: [PE] scn:8 hdl:26234
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].246 918 30074 I mtkpower_client: ret_hdl:26235
05-19 [Link].246 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:26235 hint:-1
pid:918 duration:0 => ret_hdl:26235
05-19 [Link].246 479 1594 I libPowerHal: [PE] scn:9 hdl:26235
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].270 918 30068 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26235,
tid:30068
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26234,
tid:30068
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26233,
tid:30068
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26232,
tid:30068
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26228,
tid:30068
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26223,
tid:30068
05-19 [Link].284 479 1594 I libPowerHal: [PD] scn:9 hdl:26235
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].284 918 30068 I mtkpower_client: perf_lock_rel, hdl:26222,
tid:30068
05-19 [Link].285 918 30068 I mtkpower_client: perf_lock_rel, hdl:26221,
tid:30068
05-19 [Link].285 918 30068 I mtkpower_client: perf_lock_rel, hdl:26220,
tid:30068
05-19 [Link].285 479 1594 I libPowerHal: [PD] scn:8 hdl:26234
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].295 479 1594 I libPowerHal: [PD] scn:5 hdl:26233
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].296 479 1594 I libPowerHal: [PD] scn:4 hdl:26232
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].297 479 1594 I libPowerHal: [PD] scn:6 hdl:26228
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].298 479 1594 I libPowerHal: [PD] scn:3 hdl:26223
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].300 479 1594 I libPowerHal: [PD] scn:2 hdl:26222
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].301 479 1594 I libPowerHal: [PD] scn:0 hdl:26221
lock_user:[email protected] pid:918 tid:30074 dur:0
05-19 [Link].442 918 30124 I mtkpower_client: perf_lock_rel, hdl:26231,
tid:30124
05-19 [Link].443 918 30124 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30124
05-19 [Link].444 479 1594 I libPowerHal: [PD] scn:1 hdl:26231
lock_user:[email protected] pid:918 tid:30125 dur:0
05-19 [Link].445 918 30124 I mtkpower_client: ret_hdl:26236
05-19 [Link].445 918 30124 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30124
05-19 [Link].445 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26236 hint:-1
pid:918 duration:0 => ret_hdl:26236
05-19 [Link].445 479 1594 I libPowerHal: [PE] scn:0 hdl:26236
lock_user:[email protected] pid:918 tid:30124 dur:0
05-19 [Link].445 918 30124 I mtkpower_client: ret_hdl:26237
05-19 [Link].446 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26237 hint:-1
pid:918 duration:0 => ret_hdl:26237
05-19 [Link].446 479 1594 I libPowerHal: [PE] scn:1 hdl:26237
lock_user:[email protected] pid:918 tid:30124 dur:0
05-19 [Link].497 918 30124 I mtkpower_client: perf_lock_rel, hdl:26237,
tid:30124
05-19 [Link].497 479 1594 I libPowerHal: [PD] scn:1 hdl:26237
lock_user:[email protected] pid:918 tid:30124 dur:0
05-19 [Link].777 918 15680 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].777 918 15680 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 6021 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].781 918 6021 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 6021 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 6021 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].782 918 6021 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].810 918 30165 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].810 918 30165 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].810 918 30165 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].811 918 30165 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].811 918 30165 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 159940
05-19 [Link].811 918 30165 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe431a000
05-19 [Link].812 918 30165 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].814 918 30171 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30171
05-19 [Link].815 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26243 hint:-1
pid:918 duration:0 => ret_hdl:26243
05-19 [Link].816 479 1594 I libPowerHal: [PE] scn:2 hdl:26243
lock_user:[email protected] pid:918 tid:30171 dur:0
05-19 [Link].816 918 30171 I mtkpower_client: ret_hdl:26243
05-19 [Link].829 918 30165 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].829 918 30165 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].829 918 30165 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].829 918 30165 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].829 918 30165 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].992 918 30116 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].027 918 30116 I mtkpower_client: perf_lock_rel, hdl:26237,
tid:30116
05-19 [Link].027 918 30116 I mtkpower_client: perf_lock_rel, hdl:26236,
tid:30116
05-19 [Link].027 918 30116 I mtkpower_client: perf_lock_rel, hdl:26231,
tid:30116
05-19 [Link].034 479 1594 I libPowerHal: [PD] scn:0 hdl:26236
lock_user:[email protected] pid:918 tid:30124 dur:0
05-19 [Link].077 918 30170 I mtkpower_client: perf_lock_rel, hdl:26243,
tid:30170
05-19 [Link].078 918 30170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30170
05-19 [Link].078 479 1594 I libPowerHal: [PD] scn:2 hdl:26243
lock_user:[email protected] pid:918 tid:30171 dur:0
05-19 [Link].080 918 30170 I mtkpower_client: ret_hdl:26244
05-19 [Link].080 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26244 hint:-1
pid:918 duration:0 => ret_hdl:26244
05-19 [Link].080 479 1594 I libPowerHal: [PE] scn:0 hdl:26244
lock_user:[email protected] pid:918 tid:30170 dur:0
05-19 [Link].576 918 1959 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].576 918 1959 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].578 918 1959 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].579 918 1959 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].579 918 1959 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].579 918 1959 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].580 918 1959 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].684 918 30210 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].684 918 30210 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].684 918 30210 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].687 918 30210 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].687 918 30210 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 39806
05-19 [Link].687 918 30210 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].687 918 30210 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].692 918 30221 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30221
05-19 [Link].694 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26250 hint:-1
pid:918 duration:0 => ret_hdl:26250
05-19 [Link].694 479 1594 I libPowerHal: [PE] scn:3 hdl:26250
lock_user:[email protected] pid:918 tid:30221 dur:0
05-19 [Link].694 918 30221 I mtkpower_client: ret_hdl:26250
05-19 [Link].701 918 30210 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].701 918 30210 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].701 918 30210 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].701 918 30210 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].701 918 30210 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].773 918 30209 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].793 918 30209 I mtkpower_client: perf_lock_rel, hdl:26250,
tid:30209
05-19 [Link].795 479 1594 I libPowerHal: [PD] scn:3 hdl:26250
lock_user:[email protected] pid:918 tid:30221 dur:0
05-19 [Link].799 918 1065 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].800 918 1065 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].802 918 15680 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].802 918 15680 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].803 918 1065 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].803 918 1065 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].804 918 1065 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].817 918 30170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30170
05-19 [Link].819 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26251 hint:-1
pid:918 duration:0 => ret_hdl:26251
05-19 [Link].819 479 1594 I libPowerHal: [PE] scn:2 hdl:26251
lock_user:[email protected] pid:918 tid:30170 dur:0
05-19 [Link].820 918 30170 I mtkpower_client: ret_hdl:26251
05-19 [Link].852 918 30259 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ab810
05-19 [Link].853 918 30259 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].853 918 30259 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].855 918 30259 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].855 918 30259 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43075
05-19 [Link].855 918 30259 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].856 918 30259 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].858 918 30266 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30266
05-19 [Link].878 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26252 hint:-1
pid:918 duration:0 => ret_hdl:26252
05-19 [Link].878 479 1594 I libPowerHal: [PE] scn:3 hdl:26252
lock_user:[email protected] pid:918 tid:30266 dur:0
05-19 [Link].879 918 30266 I mtkpower_client: ret_hdl:26252
05-19 [Link].888 918 30164 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].906 918 30164 I mtkpower_client: perf_lock_rel, hdl:26251,
tid:30164
05-19 [Link].907 918 30164 I mtkpower_client: perf_lock_rel, hdl:26244,
tid:30164
05-19 [Link].907 918 30164 I mtkpower_client: perf_lock_rel, hdl:26243,
tid:30164
05-19 [Link].908 479 1594 I libPowerHal: [PD] scn:2 hdl:26251
lock_user:[email protected] pid:918 tid:30170 dur:0
05-19 [Link].909 479 1594 I libPowerHal: [PD] scn:0 hdl:26244
lock_user:[email protected] pid:918 tid:30170 dur:0
05-19 [Link].913 918 30259 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].913 918 30259 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].913 918 30259 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].913 918 30259 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].913 918 30259 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].116 918 30264 I mtkpower_client: perf_lock_rel, hdl:26252,
tid:30264
05-19 [Link].116 918 30264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30264
05-19 [Link].117 479 1594 I libPowerHal: [PD] scn:3 hdl:26252
lock_user:[email protected] pid:918 tid:30266 dur:0
05-19 [Link].118 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26253 hint:-1
pid:918 duration:0 => ret_hdl:26253
05-19 [Link].118 479 1594 I libPowerHal: [PE] scn:0 hdl:26253
lock_user:[email protected] pid:918 tid:30264 dur:0
05-19 [Link].119 918 30264 I mtkpower_client: ret_hdl:26253
05-19 [Link].119 918 30264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30264
05-19 [Link].120 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26254 hint:-1
pid:918 duration:0 => ret_hdl:26254
05-19 [Link].120 479 1594 I libPowerHal: [PE] scn:2 hdl:26254
lock_user:[email protected] pid:918 tid:30264 dur:0
05-19 [Link].120 918 30264 I mtkpower_client: ret_hdl:26254
05-19 [Link].120 918 30264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30264
05-19 [Link].120 918 30264 I mtkpower_client: ret_hdl:26255
05-19 [Link].121 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26255 hint:-1
pid:918 duration:0 => ret_hdl:26255
05-19 [Link].121 479 1594 I libPowerHal: [PE] scn:3 hdl:26255
lock_user:[email protected] pid:918 tid:30264 dur:0
05-19 [Link].172 918 30264 I mtkpower_client: perf_lock_rel, hdl:26255,
tid:30264
05-19 [Link].172 918 30264 I mtkpower_client: perf_lock_rel, hdl:26254,
tid:30264
05-19 [Link].173 479 1594 I libPowerHal: [PD] scn:3 hdl:26255
lock_user:[email protected] pid:918 tid:30264 dur:0
05-19 [Link].174 479 1594 I libPowerHal: [PD] scn:2 hdl:26254
lock_user:[email protected] pid:918 tid:30264 dur:0
05-19 [Link].270 918 1065 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].270 918 1065 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].274 918 1959 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].275 918 1959 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].275 918 5724 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].276 918 32757 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].277 918 15680 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].335 918 30316 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].335 918 30316 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].335 918 30316 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].338 918 30316 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].341 918 30316 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 159940
05-19 [Link].342 918 30316 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdea54000
05-19 [Link].342 918 30316 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].344 918 30322 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30322
05-19 [Link].345 918 30322 I mtkpower_client: ret_hdl:26264
05-19 [Link].346 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26264 hint:-1
pid:918 duration:0 => ret_hdl:26264
05-19 [Link].346 479 1594 I libPowerHal: [PE] scn:2 hdl:26264
lock_user:[email protected] pid:918 tid:30322 dur:0
05-19 [Link].368 918 30316 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].368 918 30316 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].368 918 30316 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].369 918 30316 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].369 918 30316 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].468 918 30258 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].487 918 30258 I mtkpower_client: perf_lock_rel, hdl:26255,
tid:30258
05-19 [Link].488 918 30258 I mtkpower_client: perf_lock_rel, hdl:26254,
tid:30258
05-19 [Link].488 918 30258 I mtkpower_client: perf_lock_rel, hdl:26253,
tid:30258
05-19 [Link].489 918 30258 I mtkpower_client: perf_lock_rel, hdl:26252,
tid:30258
05-19 [Link].496 479 1594 I libPowerHal: [PD] scn:0 hdl:26253
lock_user:[email protected] pid:918 tid:30264 dur:0
05-19 [Link].625 918 30321 I mtkpower_client: perf_lock_rel, hdl:26264,
tid:30321
05-19 [Link].625 918 30321 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30321
05-19 [Link].626 479 1594 I libPowerHal: [PD] scn:2 hdl:26264
lock_user:[email protected] pid:918 tid:30322 dur:0
05-19 [Link].629 918 30321 I mtkpower_client: ret_hdl:26266
05-19 [Link].629 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26266 hint:-1
pid:918 duration:0 => ret_hdl:26266
05-19 [Link].629 479 1594 I libPowerHal: [PE] scn:1 hdl:26266
lock_user:[email protected] pid:918 tid:30321 dur:0
05-19 [Link].779 918 1959 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].779 918 1065 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].783 918 5033 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].783 918 5033 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].784 918 1721 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].784 918 5020 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].785 918 1065 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].864 918 30361 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].864 918 30361 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].864 918 30361 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].864 918 30361 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].864 918 30361 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 39806
05-19 [Link].864 918 30361 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].864 918 30361 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].879 918 30367 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30367
05-19 [Link].880 918 30367 I mtkpower_client: ret_hdl:26271
05-19 [Link].880 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26271 hint:-1
pid:918 duration:0 => ret_hdl:26271
05-19 [Link].880 479 1594 I libPowerHal: [PE] scn:2 hdl:26271
lock_user:[email protected] pid:918 tid:30367 dur:0
05-19 [Link].901 918 30361 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].901 918 30361 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].901 918 30361 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].901 918 30361 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].901 918 30361 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].945 918 30315 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].957 918 30315 I mtkpower_client: perf_lock_rel, hdl:26266,
tid:30315
05-19 [Link].957 918 30315 I mtkpower_client: perf_lock_rel, hdl:26264,
tid:30315
05-19 [Link].958 479 1594 I libPowerHal: [PD] scn:1 hdl:26266
lock_user:[email protected] pid:918 tid:30321 dur:0
05-19 [Link].170 918 30366 I mtkpower_client: perf_lock_rel, hdl:26271,
tid:30366
05-19 [Link].170 918 30366 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30366
05-19 [Link].170 479 1594 I libPowerHal: [PD] scn:2 hdl:26271
lock_user:[email protected] pid:918 tid:30367 dur:0
05-19 [Link].171 918 30366 I mtkpower_client: ret_hdl:26272
05-19 [Link].171 918 30366 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30366
05-19 [Link].171 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26272 hint:-1
pid:918 duration:0 => ret_hdl:26272
05-19 [Link].171 479 1594 I libPowerHal: [PE] scn:1 hdl:26272
lock_user:[email protected] pid:918 tid:30366 dur:0
05-19 [Link].172 918 30366 I mtkpower_client: ret_hdl:26273
05-19 [Link].172 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26273 hint:-1
pid:918 duration:0 => ret_hdl:26273
05-19 [Link].172 479 1594 I libPowerHal: [PE] scn:2 hdl:26273
lock_user:[email protected] pid:918 tid:30366 dur:0
05-19 [Link].317 918 30366 I mtkpower_client: perf_lock_rel, hdl:26273,
tid:30366
05-19 [Link].318 479 1594 I libPowerHal: [PD] scn:2 hdl:26273
lock_user:[email protected] pid:918 tid:30366 dur:0
05-19 [Link].745 918 1784 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].745 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].749 918 1784 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].749 918 1784 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].749 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].750 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].751 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].837 918 30407 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].837 918 30407 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].837 918 30407 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].838 918 30407 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].838 918 30407 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16859
05-19 [Link].838 918 30407 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfc83000
05-19 [Link].838 918 30407 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].842 918 30413 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30413
05-19 [Link].843 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26279 hint:-1
pid:918 duration:0 => ret_hdl:26279
05-19 [Link].843 479 1594 I libPowerHal: [PE] scn:0 hdl:26279
lock_user:[email protected] pid:918 tid:30413 dur:0
05-19 [Link].843 918 30413 I mtkpower_client: ret_hdl:26279
05-19 [Link].850 918 30407 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].850 918 30407 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].850 918 30407 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].850 918 30407 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].850 918 30407 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].976 918 30360 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].989 918 30360 I mtkpower_client: perf_lock_rel, hdl:26273,
tid:30360
05-19 [Link].992 918 30360 I mtkpower_client: perf_lock_rel, hdl:26272,
tid:30360
05-19 [Link].994 479 1594 I libPowerHal: [PD] scn:1 hdl:26272
lock_user:[email protected] pid:918 tid:30366 dur:0
05-19 [Link].994 918 30360 I mtkpower_client: perf_lock_rel, hdl:26271,
tid:30360
05-19 [Link].010 918 30412 I mtkpower_client: perf_lock_rel, hdl:26279,
tid:30412
05-19 [Link].011 918 30412 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30412
05-19 [Link].011 918 30412 I mtkpower_client: ret_hdl:26280
05-19 [Link].012 479 1594 I libPowerHal: [PD] scn:0 hdl:26279
lock_user:[email protected] pid:918 tid:30413 dur:0
05-19 [Link].015 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26280 hint:-1
pid:918 duration:0 => ret_hdl:26280
05-19 [Link].015 479 1594 I libPowerHal: [PE] scn:1 hdl:26280
lock_user:[email protected] pid:918 tid:30412 dur:0
05-19 [Link].559 918 1784 E OMXNodeInstance:
setParameter(0xea2e1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].559 918 1784 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].562 918 1784 E MtkOmxVdecEx: [0xea2e1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].562 918 1784 E OMXNodeInstance:
setConfig(0xea2e1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].563 918 1784 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].567 918 1784 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].568 918 1784 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].598 918 30454 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].598 918 30454 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].598 918 30454 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].600 918 30454 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].600 918 30454 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 12464
05-19 [Link].600 918 30454 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].600 918 30454 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].602 918 30459 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30459
05-19 [Link].603 918 30459 I mtkpower_client: ret_hdl:26286
05-19 [Link].603 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26286 hint:-1
pid:918 duration:0 => ret_hdl:26286
05-19 [Link].603 479 1594 I libPowerHal: [PE] scn:2 hdl:26286
lock_user:[email protected] pid:918 tid:30459 dur:0
05-19 [Link].609 918 30454 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].609 918 30454 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].609 918 30454 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].609 918 30454 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].609 918 30454 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].782 918 30458 I mtkpower_client: perf_lock_rel, hdl:26286,
tid:30458
05-19 [Link].782 918 30458 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30458
05-19 [Link].782 479 1594 I libPowerHal: [PD] scn:2 hdl:26286
lock_user:[email protected] pid:918 tid:30459 dur:0
05-19 [Link].783 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26287 hint:-1
pid:918 duration:0 => ret_hdl:26287
05-19 [Link].784 479 1594 I libPowerHal: [PE] scn:2 hdl:26287
lock_user:[email protected] pid:918 tid:30458 dur:0
05-19 [Link].785 918 30458 I mtkpower_client: ret_hdl:26287
05-19 [Link].798 918 30406 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].813 918 30406 I mtkpower_client: perf_lock_rel, hdl:26280,
tid:30406
05-19 [Link].813 918 30406 I mtkpower_client: perf_lock_rel, hdl:26279,
tid:30406
05-19 [Link].815 479 1594 I libPowerHal: [PD] scn:1 hdl:26280
lock_user:[email protected] pid:918 tid:30412 dur:0
05-19 [Link].537 918 5724 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].538 918 5724 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].542 918 5724 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].542 918 5724 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].543 918 5724 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].543 918 5724 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].544 918 5724 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].577 918 30497 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].577 918 30497 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].577 918 30497 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].578 918 30497 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].578 918 30497 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 62989
05-19 [Link].578 918 30497 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfd49000
05-19 [Link].578 918 30497 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].583 918 30502 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30502
05-19 [Link].585 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26291 hint:-1
pid:918 duration:0 => ret_hdl:26291
05-19 [Link].585 479 1594 I libPowerHal: [PE] scn:0 hdl:26291
lock_user:[email protected] pid:918 tid:30502 dur:0
05-19 [Link].586 918 30502 I mtkpower_client: ret_hdl:26291
05-19 [Link].595 918 30497 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].595 918 30497 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].595 918 30497 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].596 918 30497 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].596 918 30497 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].712 918 30501 I mtkpower_client: perf_lock_rel, hdl:26291,
tid:30501
05-19 [Link].713 918 30501 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30501
05-19 [Link].715 479 1594 I libPowerHal: [PD] scn:0 hdl:26291
lock_user:[email protected] pid:918 tid:30502 dur:0
05-19 [Link].716 918 30501 I mtkpower_client: ret_hdl:26292
05-19 [Link].716 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26292 hint:-1
pid:918 duration:0 => ret_hdl:26292
05-19 [Link].717 479 1594 I libPowerHal: [PE] scn:0 hdl:26292
lock_user:[email protected] pid:918 tid:30501 dur:0
05-19 [Link].086 918 30453 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].106 918 30453 I mtkpower_client: perf_lock_rel, hdl:26287,
tid:30453
05-19 [Link].107 918 30453 I mtkpower_client: perf_lock_rel, hdl:26286,
tid:30453
05-19 [Link].108 479 1594 I libPowerHal: [PD] scn:2 hdl:26287
lock_user:[email protected] pid:918 tid:30458 dur:0
05-19 [Link].928 918 5724 E OMXNodeInstance:
setParameter(0xea2e1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].928 918 5724 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].936 918 5724 E MtkOmxVdecEx: [0xea2e1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].936 918 5724 E OMXNodeInstance:
setConfig(0xea2e1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].937 918 1959 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].937 918 1959 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].938 918 1959 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].995 918 30545 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].995 918 30545 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].995 918 30545 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].996 918 30545 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].996 918 30545 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21186
05-19 [Link].996 918 30545 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].996 918 30545 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].005 918 30550 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30550
05-19 [Link].006 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26300 hint:-1
pid:918 duration:0 => ret_hdl:26300
05-19 [Link].006 479 1594 I libPowerHal: [PE] scn:1 hdl:26300
lock_user:[email protected] pid:918 tid:30550 dur:0
05-19 [Link].007 918 30550 I mtkpower_client: ret_hdl:26300
05-19 [Link].035 918 30545 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].035 918 30545 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].036 918 30545 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].036 918 30545 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].036 918 30545 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].084 918 30501 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30501
05-19 [Link].093 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26301 hint:-1
pid:918 duration:0 => ret_hdl:26301
05-19 [Link].093 479 1594 I libPowerHal: [PE] scn:3 hdl:26301
lock_user:[email protected] pid:918 tid:30501 dur:0
05-19 [Link].094 918 30501 I mtkpower_client: ret_hdl:26301
05-19 [Link].139 918 30496 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].162 918 30496 I mtkpower_client: perf_lock_rel, hdl:26301,
tid:30496
05-19 [Link].162 918 30496 I mtkpower_client: perf_lock_rel, hdl:26292,
tid:30496
05-19 [Link].162 918 30496 I mtkpower_client: perf_lock_rel, hdl:26291,
tid:30496
05-19 [Link].165 479 1594 I libPowerHal: [PD] scn:3 hdl:26301
lock_user:[email protected] pid:918 tid:30501 dur:0
05-19 [Link].166 479 1594 I libPowerHal: [PD] scn:0 hdl:26292
lock_user:[email protected] pid:918 tid:30501 dur:0
05-19 [Link].367 918 30549 I mtkpower_client: perf_lock_rel, hdl:26300,
tid:30549
05-19 [Link].367 918 30549 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30549
05-19 [Link].368 479 1594 I libPowerHal: [PD] scn:1 hdl:26300
lock_user:[email protected] pid:918 tid:30550 dur:0
05-19 [Link].371 918 30549 I mtkpower_client: ret_hdl:26302
05-19 [Link].371 918 30549 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30549
05-19 [Link].371 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26302 hint:-1
pid:918 duration:0 => ret_hdl:26302
05-19 [Link].371 479 1594 I libPowerHal: [PE] scn:0 hdl:26302
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].372 918 30549 I mtkpower_client: ret_hdl:26303
05-19 [Link].372 918 30549 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30549
05-19 [Link].373 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26303 hint:-1
pid:918 duration:0 => ret_hdl:26303
05-19 [Link].373 479 1594 I libPowerHal: [PE] scn:1 hdl:26303
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].373 918 30549 I mtkpower_client: ret_hdl:26304
05-19 [Link].374 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26304 hint:-1
pid:918 duration:0 => ret_hdl:26304
05-19 [Link].374 479 1594 I libPowerHal: [PE] scn:3 hdl:26304
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].436 918 30549 I mtkpower_client: perf_lock_rel, hdl:26304,
tid:30549
05-19 [Link].437 479 1594 I libPowerHal: [PD] scn:3 hdl:26304
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].523 918 30549 I mtkpower_client: perf_lock_rel, hdl:26303,
tid:30549
05-19 [Link].524 479 1594 I libPowerHal: [PD] scn:1 hdl:26303
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].786 918 30549 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30549
05-19 [Link].788 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26310 hint:-1
pid:918 duration:0 => ret_hdl:26310
05-19 [Link].788 479 1594 I libPowerHal: [PE] scn:1 hdl:26310
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].789 918 30549 I mtkpower_client: ret_hdl:26310
05-19 [Link].789 918 30549 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30549
05-19 [Link].791 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26311 hint:-1
pid:918 duration:0 => ret_hdl:26311
05-19 [Link].791 479 1594 I libPowerHal: [PE] scn:3 hdl:26311
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].794 918 30549 I mtkpower_client: ret_hdl:26311
05-19 [Link].886 918 30544 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].903 918 30544 I mtkpower_client: perf_lock_rel, hdl:26311,
tid:30544
05-19 [Link].903 918 30544 I mtkpower_client: perf_lock_rel, hdl:26310,
tid:30544
05-19 [Link].903 918 30544 I mtkpower_client: perf_lock_rel, hdl:26302,
tid:30544
05-19 [Link].903 918 30544 I mtkpower_client: perf_lock_rel, hdl:26300,
tid:30544
05-19 [Link].904 479 1594 I libPowerHal: [PD] scn:3 hdl:26311
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].904 918 30544 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].905 918 30544 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].905 918 30544 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].906 918 30544 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].907 479 1594 I libPowerHal: [PD] scn:1 hdl:26310
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].908 479 1594 I libPowerHal: [PD] scn:0 hdl:26302
lock_user:[email protected] pid:918 tid:30549 dur:0
05-19 [Link].336 918 1065 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].336 918 1065 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].338 918 1065 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].338 918 1065 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].338 918 5724 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].339 918 5724 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].339 918 5724 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].373 918 30596 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].374 918 30596 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].374 918 30596 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].374 918 30596 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].374 918 30596 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].375 918 30596 E VDO_LOG : GetDecoderAPI hWrapper 0xea249810
05-19 [Link].375 918 30596 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].375 918 30596 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].380 918 30596 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].381 918 30596 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 10878
05-19 [Link].381 918 30596 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].381 918 30596 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].388 918 30602 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30602
05-19 [Link].391 918 30596 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].391 918 30596 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].392 918 30596 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].392 918 30596 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].392 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26317 hint:-1
pid:918 duration:0 => ret_hdl:26317
05-19 [Link].392 918 30596 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].392 479 1594 I libPowerHal: [PE] scn:1 hdl:26317
lock_user:[email protected] pid:918 tid:30602 dur:0
05-19 [Link].392 918 30602 I mtkpower_client: ret_hdl:26317
05-19 [Link].625 918 30601 I mtkpower_client: perf_lock_rel, hdl:26317,
tid:30601
05-19 [Link].625 918 30601 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30601
05-19 [Link].626 479 1594 I libPowerHal: [PD] scn:1 hdl:26317
lock_user:[email protected] pid:918 tid:30602 dur:0
05-19 [Link].627 918 30601 I mtkpower_client: ret_hdl:26318
05-19 [Link].627 918 30601 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30601
05-19 [Link].628 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26318 hint:-1
pid:918 duration:0 => ret_hdl:26318
05-19 [Link].628 479 1594 I libPowerHal: [PE] scn:2 hdl:26318
lock_user:[email protected] pid:918 tid:30601 dur:0
05-19 [Link].629 918 30601 I mtkpower_client: ret_hdl:26319
05-19 [Link].629 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26319 hint:-1
pid:918 duration:0 => ret_hdl:26319
05-19 [Link].629 479 1594 I libPowerHal: [PE] scn:1 hdl:26319
lock_user:[email protected] pid:918 tid:30601 dur:0
05-19 [Link].670 918 30601 I mtkpower_client: perf_lock_rel, hdl:26319,
tid:30601
05-19 [Link].671 479 1594 I libPowerHal: [PD] scn:1 hdl:26319
lock_user:[email protected] pid:918 tid:30601 dur:0
05-19 [Link].395 918 1065 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].395 918 1065 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].398 918 1959 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].398 918 1959 E OMXNodeInstance:
setConfig(0xea0d1804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].398 918 1088 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].399 918 11716 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].399 918 9097 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].449 918 30639 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].449 918 30639 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].449 918 30639 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].450 918 30639 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].450 918 30639 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 69537
05-19 [Link].450 918 30639 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde129000
05-19 [Link].450 918 30639 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].460 918 30645 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30645
05-19 [Link].461 918 30645 I mtkpower_client: ret_hdl:26325
05-19 [Link].461 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26325 hint:-1
pid:918 duration:0 => ret_hdl:26325
05-19 [Link].462 479 1594 I libPowerHal: [PE] scn:0 hdl:26325
lock_user:[email protected] pid:918 tid:30645 dur:0
05-19 [Link].495 918 30639 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].495 918 30639 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].495 918 30639 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].495 918 30639 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].495 918 30639 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].563 918 30601 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30601
05-19 [Link].565 918 30601 I mtkpower_client: ret_hdl:26326
05-19 [Link].565 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26326 hint:-1
pid:918 duration:0 => ret_hdl:26326
05-19 [Link].565 479 1594 I libPowerHal: [PE] scn:3 hdl:26326
lock_user:[email protected] pid:918 tid:30601 dur:0
05-19 [Link].677 918 30595 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].695 918 30595 I mtkpower_client: perf_lock_rel, hdl:26326,
tid:30595
05-19 [Link].697 918 30595 I mtkpower_client: perf_lock_rel, hdl:26318,
tid:30595
05-19 [Link].698 918 30595 I mtkpower_client: perf_lock_rel, hdl:26317,
tid:30595
05-19 [Link].699 479 1594 I libPowerHal: [PD] scn:3 hdl:26326
lock_user:[email protected] pid:918 tid:30601 dur:0
05-19 [Link].702 479 1594 I libPowerHal: [PD] scn:2 hdl:26318
lock_user:[email protected] pid:918 tid:30601 dur:0
05-19 [Link].738 918 30644 I mtkpower_client: perf_lock_rel, hdl:26325,
tid:30644
05-19 [Link].738 918 30644 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30644
05-19 [Link].738 479 1594 I libPowerHal: [PD] scn:0 hdl:26325
lock_user:[email protected] pid:918 tid:30645 dur:0
05-19 [Link].743 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26327 hint:-1
pid:918 duration:0 => ret_hdl:26327
05-19 [Link].743 479 1594 I libPowerHal: [PE] scn:0 hdl:26327
lock_user:[email protected] pid:918 tid:30644 dur:0
05-19 [Link].743 918 30644 I mtkpower_client: ret_hdl:26327
05-19 [Link].743 918 30644 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30644
05-19 [Link].745 918 30644 I mtkpower_client: ret_hdl:26328
05-19 [Link].746 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26328 hint:-1
pid:918 duration:0 => ret_hdl:26328
05-19 [Link].746 479 1594 I libPowerHal: [PE] scn:2 hdl:26328
lock_user:[email protected] pid:918 tid:30644 dur:0
05-19 [Link].820 918 30644 I mtkpower_client: perf_lock_rel, hdl:26328,
tid:30644
05-19 [Link].820 479 1594 I libPowerHal: [PD] scn:2 hdl:26328
lock_user:[email protected] pid:918 tid:30644 dur:0
05-19 [Link].625 918 5724 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].626 918 5724 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].630 918 1065 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].630 918 1065 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].631 918 1065 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].632 918 1065 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].633 918 1065 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].693 918 30686 E VDO_LOG : GetDecoderAPI hWrapper 0xea219810
05-19 [Link].693 918 30686 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].693 918 30686 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].694 918 30686 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].694 918 30686 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 80437
05-19 [Link].694 918 30686 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].695 918 30686 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].700 918 30692 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30692
05-19 [Link].701 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26334 hint:-1
pid:918 duration:0 => ret_hdl:26334
05-19 [Link].701 479 1594 I libPowerHal: [PE] scn:2 hdl:26334
lock_user:[email protected] pid:918 tid:30692 dur:0
05-19 [Link].701 918 30692 I mtkpower_client: ret_hdl:26334
05-19 [Link].731 918 30686 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].731 918 30686 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].731 918 30686 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].732 918 30686 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].732 918 30686 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].839 918 30638 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].862 918 30638 I mtkpower_client: perf_lock_rel, hdl:26328,
tid:30638
05-19 [Link].863 918 30638 I mtkpower_client: perf_lock_rel, hdl:26327,
tid:30638
05-19 [Link].863 918 30638 I mtkpower_client: perf_lock_rel, hdl:26325,
tid:30638
05-19 [Link].864 479 1594 I libPowerHal: [PD] scn:0 hdl:26327
lock_user:[email protected] pid:918 tid:30644 dur:0
05-19 [Link].989 918 30691 I mtkpower_client: perf_lock_rel, hdl:26334,
tid:30691
05-19 [Link].989 918 30691 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30691
05-19 [Link].990 479 1594 I libPowerHal: [PD] scn:2 hdl:26334
lock_user:[email protected] pid:918 tid:30692 dur:0
05-19 [Link].991 918 30691 I mtkpower_client: ret_hdl:26335
05-19 [Link].991 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26335 hint:-1
pid:918 duration:0 => ret_hdl:26335
05-19 [Link].991 479 1594 I libPowerHal: [PE] scn:0 hdl:26335
lock_user:[email protected] pid:918 tid:30691 dur:0
05-19 [Link].645 918 1065 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].645 918 1065 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].647 918 1065 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].647 918 1065 E OMXNodeInstance:
setConfig(0xea0d1804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].648 918 1065 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].648 918 1065 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].649 918 1065 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].687 918 30735 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].687 918 30735 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].687 918 30735 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].690 918 30735 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].690 918 30735 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 12600
05-19 [Link].690 918 30735 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde844000
05-19 [Link].690 918 30735 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].697 918 30741 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30741
05-19 [Link].698 918 30741 I mtkpower_client: ret_hdl:26339
05-19 [Link].698 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26339 hint:-1
pid:918 duration:0 => ret_hdl:26339
05-19 [Link].698 479 1594 I libPowerHal: [PE] scn:1 hdl:26339
lock_user:[email protected] pid:918 tid:30741 dur:0
05-19 [Link].710 918 30735 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].711 918 30735 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].711 918 30735 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].711 918 30735 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].711 918 30735 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].926 918 30740 I mtkpower_client: perf_lock_rel, hdl:26339,
tid:30740
05-19 [Link].927 918 30740 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30740
05-19 [Link].927 479 1594 I libPowerHal: [PD] scn:1 hdl:26339
lock_user:[email protected] pid:918 tid:30741 dur:0
05-19 [Link].928 918 30740 I mtkpower_client: ret_hdl:26342
05-19 [Link].928 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26342 hint:-1
pid:918 duration:0 => ret_hdl:26342
05-19 [Link].928 479 1594 I libPowerHal: [PE] scn:1 hdl:26342
lock_user:[email protected] pid:918 tid:30740 dur:0
05-19 [Link].968 918 30691 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30691
05-19 [Link].968 918 30691 I mtkpower_client: ret_hdl:26343
05-19 [Link].969 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26343 hint:-1
pid:918 duration:0 => ret_hdl:26343
05-19 [Link].969 479 1594 I libPowerHal: [PE] scn:3 hdl:26343
lock_user:[email protected] pid:918 tid:30691 dur:0
05-19 [Link].012 918 30691 I mtkpower_client: perf_lock_rel, hdl:26343,
tid:30691
05-19 [Link].013 479 1594 I libPowerHal: [PD] scn:3 hdl:26343
lock_user:[email protected] pid:918 tid:30691 dur:0
05-19 [Link].043 918 30685 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].052 918 30685 I mtkpower_client: perf_lock_rel, hdl:26343,
tid:30685
05-19 [Link].052 918 30685 I mtkpower_client: perf_lock_rel, hdl:26335,
tid:30685
05-19 [Link].052 918 30685 I mtkpower_client: perf_lock_rel, hdl:26334,
tid:30685
05-19 [Link].053 479 1594 I libPowerHal: [PD] scn:0 hdl:26335
lock_user:[email protected] pid:918 tid:30691 dur:0
05-19 [Link].755 918 15538 E OMXNodeInstance:
setParameter(0xea2e2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].755 918 15538 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].756 918 15538 E MtkOmxVdecEx: [0xea2e2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].756 918 15538 E OMXNodeInstance:
setConfig(0xea2e2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].757 918 15538 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].757 918 15538 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].758 918 15538 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].796 918 30783 E VDO_LOG : GetDecoderAPI hWrapper 0xea1e0810
05-19 [Link].796 918 30783 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].796 918 30783 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].798 918 30783 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].798 918 30783 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 34410
05-19 [Link].798 918 30783 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].798 918 30783 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].800 918 30789 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30789
05-19 [Link].800 918 30789 I mtkpower_client: ret_hdl:26349
05-19 [Link].801 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26349 hint:-1
pid:918 duration:0 => ret_hdl:26349
05-19 [Link].801 479 1594 I libPowerHal: [PE] scn:3 hdl:26349
lock_user:[email protected] pid:918 tid:30789 dur:0
05-19 [Link].818 918 30783 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].818 918 30783 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].818 918 30783 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].818 918 30783 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].818 918 30783 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].821 918 30735 E MtkOmxVdecEx: [0xea0d1800] ret 0, wait fence 66
took 20918 us
05-19 [Link].965 918 30734 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].971 918 30734 I mtkpower_client: perf_lock_rel, hdl:26342,
tid:30734
05-19 [Link].972 918 30734 I mtkpower_client: perf_lock_rel, hdl:26339,
tid:30734
05-19 [Link].973 479 1594 I libPowerHal: [PD] scn:1 hdl:26342
lock_user:[email protected] pid:918 tid:30740 dur:0
05-19 [Link].008 918 30788 I mtkpower_client: perf_lock_rel, hdl:26349,
tid:30788
05-19 [Link].008 918 30788 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30788
05-19 [Link].008 479 1594 I libPowerHal: [PD] scn:3 hdl:26349
lock_user:[email protected] pid:918 tid:30789 dur:0
05-19 [Link].011 918 30788 I mtkpower_client: ret_hdl:26350
05-19 [Link].012 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26350 hint:-1
pid:918 duration:0 => ret_hdl:26350
05-19 [Link].012 479 1594 I libPowerHal: [PE] scn:1 hdl:26350
lock_user:[email protected] pid:918 tid:30788 dur:0
05-19 [Link].707 918 30782 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].718 918 30782 I mtkpower_client: perf_lock_rel, hdl:26350,
tid:30782
05-19 [Link].718 918 30782 I mtkpower_client: perf_lock_rel, hdl:26349,
tid:30782
05-19 [Link].719 479 1594 I libPowerHal: [PD] scn:1 hdl:26350
lock_user:[email protected] pid:918 tid:30788 dur:0
05-19 [Link].720 918 30782 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].721 918 30782 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].722 918 30782 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].722 918 30782 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].314 918 5020 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].315 918 5020 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].317 918 6021 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].317 918 6021 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].317 918 5020 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].317 918 6021 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].317 918 6021 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].346 918 30837 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].347 918 30837 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].348 918 30837 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].348 918 30837 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].348 918 30837 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].351 918 30837 E VDO_LOG : GetDecoderAPI hWrapper 0xea1e0810
05-19 [Link].351 918 30837 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].351 918 30837 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].355 918 30837 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].355 918 30837 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 34410
05-19 [Link].355 918 30837 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].355 918 30837 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].357 918 30843 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30843
05-19 [Link].358 918 30843 I mtkpower_client: ret_hdl:26361
05-19 [Link].358 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26361 hint:-1
pid:918 duration:0 => ret_hdl:26361
05-19 [Link].358 479 1594 I libPowerHal: [PE] scn:0 hdl:26361
lock_user:[email protected] pid:918 tid:30843 dur:0
05-19 [Link].361 918 30837 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].361 918 30837 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].361 918 30837 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].361 918 30837 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].361 918 30837 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].524 918 30842 I mtkpower_client: perf_lock_rel, hdl:26361,
tid:30842
05-19 [Link].524 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].525 479 1594 I libPowerHal: [PD] scn:0 hdl:26361
lock_user:[email protected] pid:918 tid:30843 dur:0
05-19 [Link].527 918 30842 I mtkpower_client: ret_hdl:26362
05-19 [Link].528 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26362 hint:-1
pid:918 duration:0 => ret_hdl:26362
05-19 [Link].528 479 1594 I libPowerHal: [PE] scn:2 hdl:26362
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].505 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].507 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26363 hint:-1
pid:918 duration:0 => ret_hdl:26363
05-19 [Link].507 479 1594 I libPowerHal: [PE] scn:0 hdl:26363
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].508 918 30842 I mtkpower_client: ret_hdl:26363
05-19 [Link].046 918 30842 I mtkpower_client: perf_lock_rel, hdl:26363,
tid:30842
05-19 [Link].046 479 1594 I libPowerHal: [PD] scn:0 hdl:26363
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].188 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].189 918 30842 I mtkpower_client: ret_hdl:26364
05-19 [Link].190 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26364 hint:-1
pid:918 duration:0 => ret_hdl:26364
05-19 [Link].190 479 1594 I libPowerHal: [PE] scn:0 hdl:26364
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].284 918 30842 I mtkpower_client: perf_lock_rel, hdl:26364,
tid:30842
05-19 [Link].285 479 1594 I libPowerHal: [PD] scn:0 hdl:26364
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].793 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].794 918 30842 I mtkpower_client: ret_hdl:26365
05-19 [Link].795 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26365 hint:-1
pid:918 duration:0 => ret_hdl:26365
05-19 [Link].795 479 1594 I libPowerHal: [PE] scn:0 hdl:26365
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].897 918 30842 I mtkpower_client: perf_lock_rel, hdl:26365,
tid:30842
05-19 [Link].899 479 1594 I libPowerHal: [PD] scn:0 hdl:26365
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].517 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].518 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26366 hint:-1
pid:918 duration:0 => ret_hdl:26366
05-19 [Link].519 479 1594 I libPowerHal: [PE] scn:0 hdl:26366
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].520 918 30842 I mtkpower_client: ret_hdl:26366
05-19 [Link].693 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].694 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26367 hint:-1
pid:918 duration:0 => ret_hdl:26367
05-19 [Link].695 479 1594 I libPowerHal: [PE] scn:1 hdl:26367
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].696 918 30842 I mtkpower_client: ret_hdl:26367
05-19 [Link].799 918 30842 I mtkpower_client: perf_lock_rel, hdl:26367,
tid:30842
05-19 [Link].800 479 1594 I libPowerHal: [PD] scn:1 hdl:26367
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].935 918 30842 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30842
05-19 [Link].936 918 30842 I mtkpower_client: ret_hdl:26368
05-19 [Link].937 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26368 hint:-1
pid:918 duration:0 => ret_hdl:26368
05-19 [Link].937 479 1594 I libPowerHal: [PE] scn:1 hdl:26368
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].032 918 30842 I mtkpower_client: perf_lock_rel, hdl:26368,
tid:30842
05-19 [Link].033 479 1594 I libPowerHal: [PD] scn:1 hdl:26368
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].097 918 30842 I mtkpower_client: perf_lock_rel, hdl:26366,
tid:30842
05-19 [Link].098 479 1594 I libPowerHal: [PD] scn:0 hdl:26366
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].895 918 30836 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].933 918 30836 I mtkpower_client: perf_lock_rel, hdl:26368,
tid:30836
05-19 [Link].933 918 30836 I mtkpower_client: perf_lock_rel, hdl:26366,
tid:30836
05-19 [Link].933 918 30836 I mtkpower_client: perf_lock_rel, hdl:26362,
tid:30836
05-19 [Link].934 918 30836 I mtkpower_client: perf_lock_rel, hdl:26361,
tid:30836
05-19 [Link].936 479 1594 I libPowerHal: [PD] scn:2 hdl:26362
lock_user:[email protected] pid:918 tid:30842 dur:0
05-19 [Link].937 918 30836 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].944 918 30836 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].944 918 30836 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].944 918 30836 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].019 918 1064 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].020 918 32761 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].022 918 1064 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].022 918 1064 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].022 918 1064 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].022 918 1064 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].023 918 1064 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].047 918 30898 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].048 918 30898 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].048 918 30898 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].048 918 30898 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].048 918 30898 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].049 918 30898 E VDO_LOG : GetDecoderAPI hWrapper 0xea1e0810
05-19 [Link].049 918 30898 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].049 918 30898 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].050 918 30898 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].050 918 30898 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 42957
05-19 [Link].050 918 30898 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].050 918 30898 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].052 918 30902 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30902
05-19 [Link].052 918 30902 I mtkpower_client: ret_hdl:26374
05-19 [Link].053 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26374 hint:-1
pid:918 duration:0 => ret_hdl:26374
05-19 [Link].053 479 1594 I libPowerHal: [PE] scn:1 hdl:26374
lock_user:[email protected] pid:918 tid:30902 dur:0
05-19 [Link].058 918 30898 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].058 918 30898 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].058 918 30898 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].058 918 30898 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].058 918 30898 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].240 918 1780 E OMXNodeInstance:
setParameter(0xea5f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].241 918 1780 E OMXNodeInstance:
getParameter(0xea5f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].244 918 1780 E MtkOmxVdecEx: [0xea5f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].244 918 1780 E OMXNodeInstance:
setConfig(0xea5f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].246 918 1780 E OMXNodeInstance:
getParameter(0xea5f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].246 918 1780 E OMXNodeInstance:
getConfig(0xea5f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1780 E OMXNodeInstance:
getConfig(0xea5f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].344 918 30901 I mtkpower_client: perf_lock_rel, hdl:26374,
tid:30901
05-19 [Link].344 918 30901 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30901
05-19 [Link].344 479 1594 I libPowerHal: [PD] scn:1 hdl:26374
lock_user:[email protected] pid:918 tid:30902 dur:0
05-19 [Link].346 918 30901 I mtkpower_client: ret_hdl:26375
05-19 [Link].346 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26375 hint:-1
pid:918 duration:0 => ret_hdl:26375
05-19 [Link].346 479 1594 I libPowerHal: [PE] scn:2 hdl:26375
lock_user:[email protected] pid:918 tid:30901 dur:0
05-19 [Link].575 918 1064 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].576 918 1780 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].586 918 1784 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].586 918 1784 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].588 918 1064 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].588 918 1784 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].590 918 1064 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].602 918 30934 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].603 918 30934 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].603 918 30934 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].605 918 30934 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].605 918 30934 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 135018
05-19 [Link].605 918 30934 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde0f2000
05-19 [Link].605 918 30934 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].612 918 30954 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30954
05-19 [Link].613 918 30954 I mtkpower_client: ret_hdl:26381
05-19 [Link].613 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26381 hint:-1
pid:918 duration:0 => ret_hdl:26381
05-19 [Link].613 479 1594 I libPowerHal: [PE] scn:0 hdl:26381
lock_user:[email protected] pid:918 tid:30954 dur:0
05-19 [Link].620 918 30934 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].620 918 30934 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].621 918 30934 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].621 918 30934 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].621 918 30934 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].682 918 30950 E VDO_LOG : GetDecoderAPI hWrapper 0xe9aea810
05-19 [Link].683 918 30950 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].683 918 30950 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].683 918 30950 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].683 918 30950 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16005
05-19 [Link].683 918 30950 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdbcb7000
05-19 [Link].683 918 30950 E VDO_LOG : vp9_dec_init() u4Width 704, u4Height
1216, Offset 0, Padding 0
05-19 [Link].694 918 30982 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30982
05-19 [Link].695 918 30982 I mtkpower_client: ret_hdl:26382
05-19 [Link].695 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26382 hint:-1
pid:918 duration:0 => ret_hdl:26382
05-19 [Link].696 479 1594 I libPowerHal: [PE] scn:3 hdl:26382
lock_user:[email protected] pid:918 tid:30982 dur:0
05-19 [Link].720 918 30950 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].720 918 30950 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].720 918 30950 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].720 918 30950 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].720 918 30950 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].833 918 30897 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].839 918 30933 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].849 918 30933 I mtkpower_client: perf_lock_rel, hdl:26381,
tid:30933
05-19 [Link].851 479 1594 I libPowerHal: [PD] scn:0 hdl:26381
lock_user:[email protected] pid:918 tid:30954 dur:0
05-19 [Link].851 918 30897 I mtkpower_client: perf_lock_rel, hdl:26375,
tid:30897
05-19 [Link].852 918 30897 I mtkpower_client: perf_lock_rel, hdl:26374,
tid:30897
05-19 [Link].852 479 1594 I libPowerHal: [PD] scn:2 hdl:26375
lock_user:[email protected] pid:918 tid:30901 dur:0
05-19 [Link].027 918 30981 I mtkpower_client: perf_lock_rel, hdl:26382,
tid:30981
05-19 [Link].027 918 30981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30981
05-19 [Link].028 479 1594 I libPowerHal: [PD] scn:3 hdl:26382
lock_user:[email protected] pid:918 tid:30982 dur:0
05-19 [Link].030 918 30981 I mtkpower_client: ret_hdl:26383
05-19 [Link].030 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26383 hint:-1
pid:918 duration:0 => ret_hdl:26383
05-19 [Link].030 479 1594 I libPowerHal: [PE] scn:0 hdl:26383
lock_user:[email protected] pid:918 tid:30981 dur:0
05-19 [Link].012 918 1784 E OMXNodeInstance:
setParameter(0xea21e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].013 918 1784 E OMXNodeInstance:
getParameter(0xea21e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 1784 E MtkOmxVdecEx: [0xea21e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].032 918 1784 E OMXNodeInstance:
setConfig(0xea21e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 1784 E OMXNodeInstance:
getParameter(0xea21e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 1784 E OMXNodeInstance:
getConfig(0xea21e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].033 918 1784 E OMXNodeInstance:
getConfig(0xea21e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].075 918 31024 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d6810
05-19 [Link].075 918 31024 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].075 918 31024 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].077 918 31024 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].078 918 31024 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 52892
05-19 [Link].078 918 31024 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].078 918 31024 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].083 918 31029 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31029
05-19 [Link].085 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26387 hint:-1
pid:918 duration:0 => ret_hdl:26387
05-19 [Link].085 479 1594 I libPowerHal: [PE] scn:1 hdl:26387
lock_user:[email protected] pid:918 tid:31029 dur:0
05-19 [Link].085 918 31029 I mtkpower_client: ret_hdl:26387
05-19 [Link].091 918 31024 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].091 918 31024 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].091 918 31024 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].091 918 31024 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].091 918 31024 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].171 918 30981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30981
05-19 [Link].171 918 30981 I mtkpower_client: ret_hdl:26388
05-19 [Link].172 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26388 hint:-1
pid:918 duration:0 => ret_hdl:26388
05-19 [Link].172 479 1594 I libPowerHal: [PE] scn:4 hdl:26388
lock_user:[email protected] pid:918 tid:30981 dur:0
05-19 [Link].329 918 30981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:30981
05-19 [Link].330 918 30981 I mtkpower_client: ret_hdl:26391
05-19 [Link].330 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26391 hint:-1
pid:918 duration:0 => ret_hdl:26391
05-19 [Link].330 479 1594 I libPowerHal: [PE] scn:3 hdl:26391
lock_user:[email protected] pid:918 tid:30981 dur:0
05-19 [Link].573 918 30949 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].584 918 31028 I mtkpower_client: perf_lock_rel, hdl:26387,
tid:31028
05-19 [Link].584 918 31028 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31028
05-19 [Link].585 479 1594 I libPowerHal: [PD] scn:1 hdl:26387
lock_user:[email protected] pid:918 tid:31029 dur:0
05-19 [Link].586 918 30949 I mtkpower_client: perf_lock_rel, hdl:26391,
tid:30949
05-19 [Link].587 918 31028 I mtkpower_client: ret_hdl:26392
05-19 [Link].587 918 30949 I mtkpower_client: perf_lock_rel, hdl:26388,
tid:30949
05-19 [Link].587 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26392 hint:-1
pid:918 duration:0 => ret_hdl:26392
05-19 [Link].587 479 1594 I libPowerHal: [PE] scn:1 hdl:26392
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].587 918 30949 I mtkpower_client: perf_lock_rel, hdl:26383,
tid:30949
05-19 [Link].587 918 30949 I mtkpower_client: perf_lock_rel, hdl:26382,
tid:30949
05-19 [Link].590 479 1594 I libPowerHal: [PD] scn:3 hdl:26391
lock_user:[email protected] pid:918 tid:30981 dur:0
05-19 [Link].591 479 1594 I libPowerHal: [PD] scn:4 hdl:26388
lock_user:[email protected] pid:918 tid:30981 dur:0
05-19 [Link].592 479 1594 I libPowerHal: [PD] scn:0 hdl:26383
lock_user:[email protected] pid:918 tid:30981 dur:0
05-19 [Link].768 918 31028 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31028
05-19 [Link].769 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26393 hint:-1
pid:918 duration:0 => ret_hdl:26393
05-19 [Link].769 479 1594 I libPowerHal: [PE] scn:0 hdl:26393
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].771 918 31028 I mtkpower_client: ret_hdl:26393
05-19 [Link].771 918 31028 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31028
05-19 [Link].771 918 31028 I mtkpower_client: ret_hdl:26394
05-19 [Link].772 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26394 hint:-1
pid:918 duration:0 => ret_hdl:26394
05-19 [Link].772 479 1594 I libPowerHal: [PE] scn:3 hdl:26394
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].882 918 31028 I mtkpower_client: perf_lock_rel, hdl:26394,
tid:31028
05-19 [Link].883 479 1594 I libPowerHal: [PD] scn:3 hdl:26394
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].948 918 31028 I mtkpower_client: perf_lock_rel, hdl:26393,
tid:31028
05-19 [Link].948 479 1594 I libPowerHal: [PD] scn:0 hdl:26393
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].214 918 1780 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].214 918 1780 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].221 918 11716 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].221 918 11716 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].223 918 11716 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].224 918 11716 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].228 918 11716 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].286 918 31076 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].286 918 31076 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].286 918 31076 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].292 918 31076 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].292 918 31076 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 32671
05-19 [Link].292 918 31076 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdefa1000
05-19 [Link].292 918 31076 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].296 918 31081 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31081
05-19 [Link].303 918 31081 I mtkpower_client: ret_hdl:26398
05-19 [Link].303 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26398 hint:-1
pid:918 duration:0 => ret_hdl:26398
05-19 [Link].303 479 1594 I libPowerHal: [PE] scn:2 hdl:26398
lock_user:[email protected] pid:918 tid:31081 dur:0
05-19 [Link].317 918 31076 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].317 918 31076 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].317 918 31076 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].317 918 31076 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].317 918 31076 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].619 918 31028 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31028
05-19 [Link].621 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26401 hint:-1
pid:918 duration:0 => ret_hdl:26401
05-19 [Link].621 479 1594 I libPowerHal: [PE] scn:3 hdl:26401
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].623 918 31028 I mtkpower_client: ret_hdl:26401
05-19 [Link].648 918 31080 I mtkpower_client: perf_lock_rel, hdl:26398,
tid:31080
05-19 [Link].649 918 31080 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31080
05-19 [Link].651 479 1594 I libPowerHal: [PD] scn:2 hdl:26398
lock_user:[email protected] pid:918 tid:31081 dur:0
05-19 [Link].653 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26402 hint:-1
pid:918 duration:0 => ret_hdl:26402
05-19 [Link].653 479 1594 I libPowerHal: [PE] scn:4 hdl:26402
lock_user:[email protected] pid:918 tid:31080 dur:0
05-19 [Link].653 918 31080 I mtkpower_client: ret_hdl:26402
05-19 [Link].686 918 31023 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].706 918 31023 I mtkpower_client: perf_lock_rel, hdl:26394,
tid:31023
05-19 [Link].706 918 31023 I mtkpower_client: perf_lock_rel, hdl:26401,
tid:31023
05-19 [Link].708 918 31023 I mtkpower_client: perf_lock_rel, hdl:26392,
tid:31023
05-19 [Link].709 479 1594 I libPowerHal: [PD] scn:3 hdl:26401
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].713 918 31023 I mtkpower_client: perf_lock_rel, hdl:26387,
tid:31023
05-19 [Link].715 479 1594 I libPowerHal: [PD] scn:1 hdl:26392
lock_user:[email protected] pid:918 tid:31028 dur:0
05-19 [Link].918 507 922 V APM_AudioPolicyManager: stopOutput portId 1097
05-19 [Link].918 507 1178 E _V_FeatureManager: erro!!,gFeatureNotifyCallback =
NULL
05-19 [Link].918 507 922 D APM_AudioPolicyManager:
[MTK_APM_Output]stopOutput() output 21, stream 3, session 4953 portId 1097
05-19 [Link].918 507 922 V APM_AudioPolicyManager: setBeaconMute(1)
mBeaconMuteRefCount=1 mBeaconPlayingRefCount=0
05-19 [Link].918 507 922 V APM_AudioPolicyManager:
selectOutputForMusicEffects activeOnly 1 output 21 flags 0x00000008
05-19 [Link].008 918 31080 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31080
05-19 [Link].009 918 31080 I mtkpower_client: ret_hdl:26403
05-19 [Link].009 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26403 hint:-1
pid:918 duration:0 => ret_hdl:26403
05-19 [Link].009 479 1594 I libPowerHal: [PE] scn:1 hdl:26403
lock_user:[email protected] pid:918 tid:31080 dur:0
05-19 [Link].073 918 31080 I mtkpower_client: perf_lock_rel, hdl:26403,
tid:31080
05-19 [Link].076 479 1594 I libPowerHal: [PD] scn:1 hdl:26403
lock_user:[email protected] pid:918 tid:31080 dur:0
05-19 [Link].276 918 15538 E OMXNodeInstance:
setParameter(0xea21f804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].277 918 1780 E OMXNodeInstance:
getParameter(0xea21f804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].279 918 1780 E MtkOmxVdecEx: [0xea21f800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].279 918 1780 E OMXNodeInstance:
setConfig(0xea21f804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].280 918 1780 E OMXNodeInstance:
getParameter(0xea21f804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].280 918 1780 E OMXNodeInstance:
getConfig(0xea21f804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].280 918 1780 E OMXNodeInstance:
getConfig(0xea21f804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].389 918 31151 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d1810
05-19 [Link].390 918 31151 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].390 918 31151 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].391 918 31151 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].391 918 31151 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 52892
05-19 [Link].391 918 31151 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].391 918 31151 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].394 918 31157 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31157
05-19 [Link].395 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26409 hint:-1
pid:918 duration:0 => ret_hdl:26409
05-19 [Link].395 479 1594 I libPowerHal: [PE] scn:0 hdl:26409
lock_user:[email protected] pid:918 tid:31157 dur:0
05-19 [Link].396 918 31157 I mtkpower_client: ret_hdl:26409
05-19 [Link].410 918 31151 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].410 918 31151 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].411 918 31151 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].411 918 31151 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].411 918 31151 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].494 918 31075 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].517 918 31075 I mtkpower_client: perf_lock_rel, hdl:26403,
tid:31075
05-19 [Link].518 918 31075 I mtkpower_client: perf_lock_rel, hdl:26402,
tid:31075
05-19 [Link].518 918 31075 I mtkpower_client: perf_lock_rel, hdl:26398,
tid:31075
05-19 [Link].519 479 1594 I libPowerHal: [PD] scn:4 hdl:26402
lock_user:[email protected] pid:918 tid:31080 dur:0
05-19 [Link].744 918 31156 I mtkpower_client: perf_lock_rel, hdl:26409,
tid:31156
05-19 [Link].744 918 31156 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31156
05-19 [Link].745 479 1594 I libPowerHal: [PD] scn:0 hdl:26409
lock_user:[email protected] pid:918 tid:31157 dur:0
05-19 [Link].746 918 31156 I mtkpower_client: ret_hdl:26410
05-19 [Link].746 918 31156 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31156
05-19 [Link].746 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26410 hint:-1
pid:918 duration:0 => ret_hdl:26410
05-19 [Link].746 479 1594 I libPowerHal: [PE] scn:1 hdl:26410
lock_user:[email protected] pid:918 tid:31156 dur:0
05-19 [Link].747 918 31156 I mtkpower_client: ret_hdl:26411
05-19 [Link].748 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26411 hint:-1
pid:918 duration:0 => ret_hdl:26411
05-19 [Link].748 479 1594 I libPowerHal: [PE] scn:0 hdl:26411
lock_user:[email protected] pid:918 tid:31156 dur:0
05-19 [Link].024 918 1959 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].025 918 1088 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 1780 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].030 918 1780 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 15538 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].031 918 32761 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 15538 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].081 918 31204 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].081 918 31204 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].081 918 31204 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].081 918 31204 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].082 918 31204 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 32671
05-19 [Link].082 918 31204 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdee40000
05-19 [Link].082 918 31204 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].095 918 31210 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31210
05-19 [Link].096 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26417 hint:-1
pid:918 duration:0 => ret_hdl:26417
05-19 [Link].096 479 1594 I libPowerHal: [PE] scn:2 hdl:26417
lock_user:[email protected] pid:918 tid:31210 dur:0
05-19 [Link].097 918 31210 I mtkpower_client: ret_hdl:26417
05-19 [Link].137 918 31204 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].137 918 31204 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].137 918 31204 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].137 918 31204 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].137 918 31204 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].146 918 31150 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].185 918 31150 I mtkpower_client: perf_lock_rel, hdl:26411,
tid:31150
05-19 [Link].187 479 1594 I libPowerHal: [PD] scn:0 hdl:26411
lock_user:[email protected] pid:918 tid:31156 dur:0
05-19 [Link].188 918 31150 I mtkpower_client: perf_lock_rel, hdl:26410,
tid:31150
05-19 [Link].189 918 31150 I mtkpower_client: perf_lock_rel, hdl:26409,
tid:31150
05-19 [Link].190 479 1594 I libPowerHal: [PD] scn:1 hdl:26410
lock_user:[email protected] pid:918 tid:31156 dur:0
05-19 [Link].422 918 32761 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].423 918 32761 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].425 918 32761 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].425 918 32761 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].425 918 32761 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].425 918 32761 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].426 918 32761 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].461 918 31275 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d1810
05-19 [Link].461 918 31275 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].461 918 31275 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].462 918 31275 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].462 918 31275 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 61056
05-19 [Link].462 918 31275 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2a24000
05-19 [Link].462 918 31275 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].470 918 31280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31280
05-19 [Link].472 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26423 hint:-1
pid:918 duration:0 => ret_hdl:26423
05-19 [Link].472 479 1594 I libPowerHal: [PE] scn:1 hdl:26423
lock_user:[email protected] pid:918 tid:31280 dur:0
05-19 [Link].472 918 31280 I mtkpower_client: ret_hdl:26423
05-19 [Link].482 918 31275 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].482 918 31275 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].482 918 31275 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].482 918 31275 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].482 918 31275 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].561 918 31209 I mtkpower_client: perf_lock_rel, hdl:26417,
tid:31209
05-19 [Link].561 918 31209 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31209
05-19 [Link].562 479 1594 I libPowerHal: [PD] scn:2 hdl:26417
lock_user:[email protected] pid:918 tid:31210 dur:0
05-19 [Link].563 918 31209 I mtkpower_client: ret_hdl:26424
05-19 [Link].563 918 31209 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31209
05-19 [Link].563 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26424 hint:-1
pid:918 duration:0 => ret_hdl:26424
05-19 [Link].564 479 1594 I libPowerHal: [PE] scn:2 hdl:26424
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].566 918 31209 I mtkpower_client: ret_hdl:26425
05-19 [Link].566 918 31209 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31209
05-19 [Link].568 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26425 hint:-1
pid:918 duration:0 => ret_hdl:26425
05-19 [Link].568 479 1594 I libPowerHal: [PE] scn:3 hdl:26425
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].569 918 31209 I mtkpower_client: ret_hdl:26426
05-19 [Link].570 918 31209 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31209
05-19 [Link].571 918 31209 I mtkpower_client: ret_hdl:26427
05-19 [Link].571 918 31209 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31209
05-19 [Link].572 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26426 hint:-1
pid:918 duration:0 => ret_hdl:26426
05-19 [Link].572 479 1594 I libPowerHal: [PE] scn:4 hdl:26426
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].575 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26427 hint:-1
pid:918 duration:0 => ret_hdl:26427
05-19 [Link].575 479 1594 I libPowerHal: [PE] scn:5 hdl:26427
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].577 918 31209 I mtkpower_client: ret_hdl:26428
05-19 [Link].577 918 31209 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31209
05-19 [Link].577 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26428 hint:-1
pid:918 duration:0 => ret_hdl:26428
05-19 [Link].577 479 1594 I libPowerHal: [PE] scn:6 hdl:26428
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].578 918 31209 I mtkpower_client: ret_hdl:26429
05-19 [Link].578 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26429 hint:-1
pid:918 duration:0 => ret_hdl:26429
05-19 [Link].578 479 1594 I libPowerHal: [PE] scn:7 hdl:26429
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].620 918 31203 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].638 918 31203 I mtkpower_client: perf_lock_rel, hdl:26429,
tid:31203
05-19 [Link].639 479 1594 I libPowerHal: [PD] scn:7 hdl:26429
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].640 918 31203 I mtkpower_client: perf_lock_rel, hdl:26428,
tid:31203
05-19 [Link].643 918 31203 I mtkpower_client: perf_lock_rel, hdl:26427,
tid:31203
05-19 [Link].644 918 31203 I mtkpower_client: perf_lock_rel, hdl:26426,
tid:31203
05-19 [Link].644 918 31203 I mtkpower_client: perf_lock_rel, hdl:26425,
tid:31203
05-19 [Link].644 918 31203 I mtkpower_client: perf_lock_rel, hdl:26424,
tid:31203
05-19 [Link].644 479 1594 I libPowerHal: [PD] scn:6 hdl:26428
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].644 918 31203 I mtkpower_client: perf_lock_rel, hdl:26417,
tid:31203
05-19 [Link].645 479 1594 I libPowerHal: [PD] scn:5 hdl:26427
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].646 479 1594 I libPowerHal: [PD] scn:4 hdl:26426
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].646 479 1594 I libPowerHal: [PD] scn:3 hdl:26425
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].647 479 1594 I libPowerHal: [PD] scn:2 hdl:26424
lock_user:[email protected] pid:918 tid:31209 dur:0
05-19 [Link].844 918 31278 I mtkpower_client: perf_lock_rel, hdl:26423,
tid:31278
05-19 [Link].844 918 31278 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31278
05-19 [Link].845 479 1594 I libPowerHal: [PD] scn:1 hdl:26423
lock_user:[email protected] pid:918 tid:31280 dur:0
05-19 [Link].847 918 31278 I mtkpower_client: ret_hdl:26430
05-19 [Link].847 918 31278 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31278
05-19 [Link].848 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26430 hint:-1
pid:918 duration:0 => ret_hdl:26430
05-19 [Link].848 479 1594 I libPowerHal: [PE] scn:1 hdl:26430
lock_user:[email protected] pid:918 tid:31278 dur:0
05-19 [Link].849 918 31278 I mtkpower_client: ret_hdl:26431
05-19 [Link].849 918 31278 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31278
05-19 [Link].850 918 31278 I mtkpower_client: ret_hdl:26432
05-19 [Link].851 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26431 hint:-1
pid:918 duration:0 => ret_hdl:26431
05-19 [Link].851 479 1594 I libPowerHal: [PE] scn:2 hdl:26431
lock_user:[email protected] pid:918 tid:31278 dur:0
05-19 [Link].852 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26432 hint:-1
pid:918 duration:0 => ret_hdl:26432
05-19 [Link].852 479 1594 I libPowerHal: [PE] scn:3 hdl:26432
lock_user:[email protected] pid:918 tid:31278 dur:0
05-19 [Link].963 918 31278 I mtkpower_client: perf_lock_rel, hdl:26432,
tid:31278
05-19 [Link].964 918 31278 I mtkpower_client: perf_lock_rel, hdl:26431,
tid:31278
05-19 [Link].964 479 1594 I libPowerHal: [PD] scn:3 hdl:26432
lock_user:[email protected] pid:918 tid:31278 dur:0
05-19 [Link].965 479 1594 I libPowerHal: [PD] scn:2 hdl:26431
lock_user:[email protected] pid:918 tid:31278 dur:0
05-19 [Link].251 918 5020 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].251 918 32761 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].255 918 1820 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].255 918 1820 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].256 918 918 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].256 918 5058 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].258 918 15538 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].362 918 31326 E VDO_LOG : GetDecoderAPI hWrapper 0xea079810
05-19 [Link].362 918 31326 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].362 918 31326 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].365 918 31326 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].365 918 31326 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 139168
05-19 [Link].365 918 31326 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3d8e000
05-19 [Link].365 918 31326 E VDO_LOG : vp9_dec_init() u4Width 832, u4Height
1472, Offset 0, Padding 0
05-19 [Link].379 918 31335 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31335
05-19 [Link].380 918 31335 I mtkpower_client: ret_hdl:26438
05-19 [Link].380 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26438 hint:-1
pid:918 duration:0 => ret_hdl:26438
05-19 [Link].380 479 1594 I libPowerHal: [PE] scn:0 hdl:26438
lock_user:[email protected] pid:918 tid:31335 dur:0
05-19 [Link].416 918 31326 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].416 918 31326 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].416 918 31326 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].416 918 31326 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].416 918 31326 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].438 918 31274 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].452 918 31274 I mtkpower_client: perf_lock_rel, hdl:26432,
tid:31274
05-19 [Link].453 918 31274 I mtkpower_client: perf_lock_rel, hdl:26431,
tid:31274
05-19 [Link].454 918 31274 I mtkpower_client: perf_lock_rel, hdl:26430,
tid:31274
05-19 [Link].456 918 31274 I mtkpower_client: perf_lock_rel, hdl:26423,
tid:31274
05-19 [Link].457 479 1594 I libPowerHal: [PD] scn:1 hdl:26430
lock_user:[email protected] pid:918 tid:31278 dur:0
05-19 [Link].699 918 31334 I mtkpower_client: perf_lock_rel, hdl:26438,
tid:31334
05-19 [Link].700 918 31334 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31334
05-19 [Link].700 479 1594 I libPowerHal: [PD] scn:0 hdl:26438
lock_user:[email protected] pid:918 tid:31335 dur:0
05-19 [Link].702 918 31334 I mtkpower_client: ret_hdl:26439
05-19 [Link].702 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26439 hint:-1
pid:918 duration:0 => ret_hdl:26439
05-19 [Link].702 479 1594 I libPowerHal: [PE] scn:0 hdl:26439
lock_user:[email protected] pid:918 tid:31334 dur:0
05-19 [Link].556 918 11716 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].556 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].559 918 5724 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].559 918 5724 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].560 918 15538 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].560 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].563 918 5033 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].617 918 31390 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d1810
05-19 [Link].617 918 31390 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].618 918 31390 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].619 918 31390 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].619 918 31390 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 10929
05-19 [Link].619 918 31390 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1a5f000
05-19 [Link].619 918 31390 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].636 918 31398 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31398
05-19 [Link].637 918 31398 I mtkpower_client: ret_hdl:26445
05-19 [Link].639 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26445 hint:-1
pid:918 duration:0 => ret_hdl:26445
05-19 [Link].639 479 1594 I libPowerHal: [PE] scn:2 hdl:26445
lock_user:[email protected] pid:918 tid:31398 dur:0
05-19 [Link].673 918 31390 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].673 918 31390 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].673 918 31390 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].673 918 31390 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].673 918 31390 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].770 918 31325 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].795 918 31325 I mtkpower_client: perf_lock_rel, hdl:26439,
tid:31325
05-19 [Link].795 918 31325 I mtkpower_client: perf_lock_rel, hdl:26438,
tid:31325
05-19 [Link].796 479 1594 I libPowerHal: [PD] scn:0 hdl:26439
lock_user:[email protected] pid:918 tid:31334 dur:0
05-19 [Link].034 918 31397 I mtkpower_client: perf_lock_rel, hdl:26445,
tid:31397
05-19 [Link].034 918 31397 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31397
05-19 [Link].035 479 1594 I libPowerHal: [PD] scn:2 hdl:26445
lock_user:[email protected] pid:918 tid:31398 dur:0
05-19 [Link].036 918 31397 I mtkpower_client: ret_hdl:26446
05-19 [Link].037 918 31397 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31397
05-19 [Link].037 918 31397 I mtkpower_client: ret_hdl:26447
05-19 [Link].037 918 31397 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31397
05-19 [Link].040 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26446 hint:-1
pid:918 duration:0 => ret_hdl:26446
05-19 [Link].040 479 1594 I libPowerHal: [PE] scn:0 hdl:26446
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].041 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26447 hint:-1
pid:918 duration:0 => ret_hdl:26447
05-19 [Link].041 479 1594 I libPowerHal: [PE] scn:2 hdl:26447
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].043 918 31397 I mtkpower_client: ret_hdl:26448
05-19 [Link].044 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26448 hint:-1
pid:918 duration:0 => ret_hdl:26448
05-19 [Link].044 479 1594 I libPowerHal: [PE] scn:3 hdl:26448
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].442 918 1960 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].443 918 1960 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].446 918 1960 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].446 918 1960 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].446 918 1960 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].446 918 1960 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].447 918 1960 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].470 918 31397 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31397
05-19 [Link].471 918 31397 I mtkpower_client: ret_hdl:26454
05-19 [Link].472 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26454 hint:-1
pid:918 duration:0 => ret_hdl:26454
05-19 [Link].472 479 1594 I libPowerHal: [PE] scn:1 hdl:26454
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].556 918 31444 E VDO_LOG : GetDecoderAPI hWrapper 0xea07e810
05-19 [Link].556 918 31444 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].556 918 31444 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].563 918 31444 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].563 918 31444 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 59189
05-19 [Link].563 918 31444 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0e5e000
05-19 [Link].563 918 31444 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].580 918 31451 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31451
05-19 [Link].581 918 31451 I mtkpower_client: ret_hdl:26455
05-19 [Link].581 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26455 hint:-1
pid:918 duration:0 => ret_hdl:26455
05-19 [Link].581 479 1594 I libPowerHal: [PE] scn:5 hdl:26455
lock_user:[email protected] pid:918 tid:31451 dur:0
05-19 [Link].617 918 31444 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].617 918 31444 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].617 918 31444 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].617 918 31444 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].617 918 31444 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].630 918 31389 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].641 918 31389 I mtkpower_client: perf_lock_rel, hdl:26454,
tid:31389
05-19 [Link].644 479 1594 I libPowerHal: [PD] scn:1 hdl:26454
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].645 918 31389 I mtkpower_client: perf_lock_rel, hdl:26448,
tid:31389
05-19 [Link].645 918 31389 I mtkpower_client: perf_lock_rel, hdl:26447,
tid:31389
05-19 [Link].645 918 31389 I mtkpower_client: perf_lock_rel, hdl:26446,
tid:31389
05-19 [Link].646 918 31389 I mtkpower_client: perf_lock_rel, hdl:26445,
tid:31389
05-19 [Link].646 479 1594 I libPowerHal: [PD] scn:3 hdl:26448
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].650 479 1594 I libPowerHal: [PD] scn:2 hdl:26447
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].651 479 1594 I libPowerHal: [PD] scn:0 hdl:26446
lock_user:[email protected] pid:918 tid:31397 dur:0
05-19 [Link].888 918 31450 I mtkpower_client: perf_lock_rel, hdl:26455,
tid:31450
05-19 [Link].888 918 31450 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31450
05-19 [Link].889 479 1594 I libPowerHal: [PD] scn:5 hdl:26455
lock_user:[email protected] pid:918 tid:31451 dur:0
05-19 [Link].891 918 31450 I mtkpower_client: ret_hdl:26456
05-19 [Link].891 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26456 hint:-1
pid:918 duration:0 => ret_hdl:26456
05-19 [Link].891 479 1594 I libPowerHal: [PE] scn:0 hdl:26456
lock_user:[email protected] pid:918 tid:31450 dur:0
05-19 [Link].411 918 11689 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].411 918 5033 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].416 918 1960 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].416 918 1960 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].417 918 5033 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].418 918 9097 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].419 918 1784 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].552 918 31492 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d1810
05-19 [Link].554 918 31492 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].554 918 31492 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].555 918 31492 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].555 918 31492 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16770
05-19 [Link].555 918 31492 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe29d8000
05-19 [Link].555 918 31492 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].577 918 31498 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31498
05-19 [Link].578 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26460 hint:-1
pid:918 duration:0 => ret_hdl:26460
05-19 [Link].578 479 1594 I libPowerHal: [PE] scn:2 hdl:26460
lock_user:[email protected] pid:918 tid:31498 dur:0
05-19 [Link].579 918 31498 I mtkpower_client: ret_hdl:26460
05-19 [Link].603 918 31492 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].603 918 31492 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].603 918 31492 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].603 918 31492 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].603 918 31492 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].889 918 31450 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31450
05-19 [Link].892 918 31450 I mtkpower_client: ret_hdl:26463
05-19 [Link].893 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26463 hint:-1
pid:918 duration:0 => ret_hdl:26463
05-19 [Link].893 479 1594 I libPowerHal: [PE] scn:3 hdl:26463
lock_user:[email protected] pid:918 tid:31450 dur:0
05-19 [Link].008 918 31450 I mtkpower_client: perf_lock_rel, hdl:26463,
tid:31450
05-19 [Link].009 479 1594 I libPowerHal: [PD] scn:3 hdl:26463
lock_user:[email protected] pid:918 tid:31450 dur:0
05-19 [Link].165 918 31443 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].179 918 31443 I mtkpower_client: perf_lock_rel, hdl:26463,
tid:31443
05-19 [Link].180 918 31443 I mtkpower_client: perf_lock_rel, hdl:26456,
tid:31443
05-19 [Link].180 918 31443 I mtkpower_client: perf_lock_rel, hdl:26455,
tid:31443
05-19 [Link].181 479 1594 I libPowerHal: [PD] scn:0 hdl:26456
lock_user:[email protected] pid:918 tid:31450 dur:0
05-19 [Link].283 918 31497 I mtkpower_client: perf_lock_rel, hdl:26460,
tid:31497
05-19 [Link].283 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].283 479 1594 I libPowerHal: [PD] scn:2 hdl:26460
lock_user:[email protected] pid:918 tid:31498 dur:0
05-19 [Link].284 918 31497 I mtkpower_client: ret_hdl:26464
05-19 [Link].284 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].284 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26464 hint:-1
pid:918 duration:0 => ret_hdl:26464
05-19 [Link].284 479 1594 I libPowerHal: [PE] scn:0 hdl:26464
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].285 918 31497 I mtkpower_client: ret_hdl:26465
05-19 [Link].285 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].285 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26465 hint:-1
pid:918 duration:0 => ret_hdl:26465
05-19 [Link].285 479 1594 I libPowerHal: [PE] scn:2 hdl:26465
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].286 918 31497 I mtkpower_client: ret_hdl:26466
05-19 [Link].287 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26466 hint:-1
pid:918 duration:0 => ret_hdl:26466
05-19 [Link].287 479 1594 I libPowerHal: [PE] scn:3 hdl:26466
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].399 918 31497 I mtkpower_client: perf_lock_rel, hdl:26466,
tid:31497
05-19 [Link].400 479 1594 I libPowerHal: [PD] scn:3 hdl:26466
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].557 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].558 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26468 hint:-1
pid:918 duration:0 => ret_hdl:26468
05-19 [Link].558 479 1594 I libPowerHal: [PE] scn:1 hdl:26468
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].559 918 31497 I mtkpower_client: ret_hdl:26468
05-19 [Link].770 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].772 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26471 hint:-1
pid:918 duration:0 => ret_hdl:26471
05-19 [Link].772 479 1594 I libPowerHal: [PE] scn:4 hdl:26471
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].774 918 31497 I mtkpower_client: ret_hdl:26471
05-19 [Link].778 918 11689 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].778 918 11689 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 11689 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].781 918 11689 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 11689 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 11689 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].782 918 11689 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].905 918 31548 E VDO_LOG : GetDecoderAPI hWrapper 0xea07e810
05-19 [Link].905 918 31548 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].905 918 31548 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].905 918 31548 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].906 918 31548 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 59189
05-19 [Link].906 918 31548 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe02f5000
05-19 [Link].906 918 31548 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].914 918 31556 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31556
05-19 [Link].916 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26474 hint:-1
pid:918 duration:0 => ret_hdl:26474
05-19 [Link].916 479 1594 I libPowerHal: [PE] scn:5 hdl:26474
lock_user:[email protected] pid:918 tid:31556 dur:0
05-19 [Link].916 918 31556 I mtkpower_client: ret_hdl:26474
05-19 [Link].918 918 31548 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].918 918 31548 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].918 918 31548 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].918 918 31548 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].918 918 31548 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].060 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].061 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26475 hint:-1
pid:918 duration:0 => ret_hdl:26475
05-19 [Link].061 479 1594 I libPowerHal: [PE] scn:6 hdl:26475
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].062 918 31497 I mtkpower_client: ret_hdl:26475
05-19 [Link].062 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].064 918 31497 I mtkpower_client: ret_hdl:26476
05-19 [Link].064 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].065 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26476 hint:-1
pid:918 duration:0 => ret_hdl:26476
05-19 [Link].065 479 1594 I libPowerHal: [PE] scn:7 hdl:26476
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].067 918 31497 I mtkpower_client: ret_hdl:26477
05-19 [Link].067 918 31497 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31497
05-19 [Link].068 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:26477 hint:-1
pid:918 duration:0 => ret_hdl:26477
05-19 [Link].068 479 1594 I libPowerHal: [PE] scn:8 hdl:26477
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].069 918 31497 I mtkpower_client: ret_hdl:26478
05-19 [Link].069 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:26478 hint:-1
pid:918 duration:0 => ret_hdl:26478
05-19 [Link].069 479 1594 I libPowerHal: [PE] scn:9 hdl:26478
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].106 918 31555 I mtkpower_client: perf_lock_rel, hdl:26474,
tid:31555
05-19 [Link].106 918 31555 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31555
05-19 [Link].107 479 1594 I libPowerHal: [PD] scn:5 hdl:26474
lock_user:[email protected] pid:918 tid:31556 dur:0
05-19 [Link].107 918 31555 I mtkpower_client: ret_hdl:26479
05-19 [Link].108 479 1594 I libPowerHal: [perfLockAcq] idx:10 hdl:26479 hint:-
1 pid:918 duration:0 => ret_hdl:26479
05-19 [Link].108 479 1594 I libPowerHal: [PE] scn:10 hdl:26479
lock_user:[email protected] pid:918 tid:31555 dur:0
05-19 [Link].190 918 31491 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].203 918 31491 I mtkpower_client: perf_lock_rel, hdl:26478,
tid:31491
05-19 [Link].204 918 31491 I mtkpower_client: perf_lock_rel, hdl:26477,
tid:31491
05-19 [Link].204 918 31491 I mtkpower_client: perf_lock_rel, hdl:26476,
tid:31491
05-19 [Link].204 479 1594 I libPowerHal: [PD] scn:9 hdl:26478
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].204 918 31491 I mtkpower_client: perf_lock_rel, hdl:26475,
tid:31491
05-19 [Link].204 918 31491 I mtkpower_client: perf_lock_rel, hdl:26471,
tid:31491
05-19 [Link].204 918 31491 I mtkpower_client: perf_lock_rel, hdl:26468,
tid:31491
05-19 [Link].204 918 31491 I mtkpower_client: perf_lock_rel, hdl:26465,
tid:31491
05-19 [Link].205 918 31491 I mtkpower_client: perf_lock_rel, hdl:26464,
tid:31491
05-19 [Link].205 918 31491 I mtkpower_client: perf_lock_rel, hdl:26460,
tid:31491
05-19 [Link].206 479 1594 I libPowerHal: [PD] scn:8 hdl:26477
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].207 479 1594 I libPowerHal: [PD] scn:7 hdl:26476
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].208 479 1594 I libPowerHal: [PD] scn:6 hdl:26475
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].209 479 1594 I libPowerHal: [PD] scn:4 hdl:26471
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].210 479 1594 I libPowerHal: [PD] scn:1 hdl:26468
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].212 479 1594 I libPowerHal: [PD] scn:2 hdl:26465
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].213 479 1594 I libPowerHal: [PD] scn:0 hdl:26464
lock_user:[email protected] pid:918 tid:31497 dur:0
05-19 [Link].904 918 11716 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].905 918 11716 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].910 918 5724 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].910 918 5724 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].911 918 5724 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].911 918 5724 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].912 918 5724 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].968 918 31669 E VDO_LOG : GetDecoderAPI hWrapper 0xea1d1810
05-19 [Link].968 918 31669 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].968 918 31669 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].970 918 31669 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].970 918 31669 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16770
05-19 [Link].970 918 31669 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2c8e000
05-19 [Link].970 918 31669 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].978 918 31680 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31680
05-19 [Link].981 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26485 hint:-1
pid:918 duration:0 => ret_hdl:26485
05-19 [Link].981 479 1594 I libPowerHal: [PE] scn:2 hdl:26485
lock_user:[email protected] pid:918 tid:31680 dur:0
05-19 [Link].982 918 31680 I mtkpower_client: ret_hdl:26485
05-19 [Link].997 918 31669 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].997 918 31669 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].998 918 31669 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].998 918 31669 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].998 918 31669 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].235 918 31547 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].279 918 31547 I mtkpower_client: perf_lock_rel, hdl:26479,
tid:31547
05-19 [Link].280 918 31547 I mtkpower_client: perf_lock_rel, hdl:26474,
tid:31547
05-19 [Link].291 479 1594 I libPowerHal: [PD] scn:10 hdl:26479
lock_user:[email protected] pid:918 tid:31555 dur:0
05-19 [Link].340 918 31679 I mtkpower_client: perf_lock_rel, hdl:26485,
tid:31679
05-19 [Link].340 918 31679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31679
05-19 [Link].341 479 1594 I libPowerHal: [PD] scn:2 hdl:26485
lock_user:[email protected] pid:918 tid:31680 dur:0
05-19 [Link].342 918 31679 I mtkpower_client: ret_hdl:26489
05-19 [Link].345 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26489 hint:-1
pid:918 duration:0 => ret_hdl:26489
05-19 [Link].345 479 1594 I libPowerHal: [PE] scn:4 hdl:26489
lock_user:[email protected] pid:918 tid:31679 dur:0
05-19 [Link].426 918 1820 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].426 918 1820 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].429 918 1820 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].429 918 1820 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].429 918 1820 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].430 918 1820 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].431 918 1820 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].498 918 31679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31679
05-19 [Link].498 918 31679 I mtkpower_client: ret_hdl:26492
05-19 [Link].499 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26492 hint:-1
pid:918 duration:0 => ret_hdl:26492
05-19 [Link].499 479 1594 I libPowerHal: [PE] scn:0 hdl:26492
lock_user:[email protected] pid:918 tid:31679 dur:0
05-19 [Link].524 918 31724 E VDO_LOG : GetDecoderAPI hWrapper 0xea07e810
05-19 [Link].524 918 31724 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].524 918 31724 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].525 918 31724 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].525 918 31724 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 59189
05-19 [Link].525 918 31724 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe02f5000
05-19 [Link].525 918 31724 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].528 918 31731 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31731
05-19 [Link].529 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26493 hint:-1
pid:918 duration:0 => ret_hdl:26493
05-19 [Link].529 479 1594 I libPowerHal: [PE] scn:1 hdl:26493
lock_user:[email protected] pid:918 tid:31731 dur:0
05-19 [Link].529 918 31731 I mtkpower_client: ret_hdl:26493
05-19 [Link].580 918 31724 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].580 918 31724 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].580 918 31724 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].580 918 31724 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].580 918 31724 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].642 918 31668 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].650 918 31668 I mtkpower_client: perf_lock_rel, hdl:26492,
tid:31668
05-19 [Link].651 918 31668 I mtkpower_client: perf_lock_rel, hdl:26489,
tid:31668
05-19 [Link].651 479 1594 I libPowerHal: [PD] scn:0 hdl:26492
lock_user:[email protected] pid:918 tid:31679 dur:0
05-19 [Link].653 918 31668 I mtkpower_client: perf_lock_rel, hdl:26485,
tid:31668
05-19 [Link].655 479 1594 I libPowerHal: [PD] scn:4 hdl:26489
lock_user:[email protected] pid:918 tid:31679 dur:0
05-19 [Link].811 918 31729 I mtkpower_client: perf_lock_rel, hdl:26493,
tid:31729
05-19 [Link].811 918 31729 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31729
05-19 [Link].812 479 1594 I libPowerHal: [PD] scn:1 hdl:26493
lock_user:[email protected] pid:918 tid:31731 dur:0
05-19 [Link].814 918 31729 I mtkpower_client: ret_hdl:26494
05-19 [Link].815 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26494 hint:-1
pid:918 duration:0 => ret_hdl:26494
05-19 [Link].815 479 1594 I libPowerHal: [PE] scn:0 hdl:26494
lock_user:[email protected] pid:918 tid:31729 dur:0
05-19 [Link].278 918 1820 E OMXNodeInstance:
setParameter(0xea209004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].279 918 11716 E OMXNodeInstance:
getParameter(0xea209004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].282 918 1064 E MtkOmxVdecEx: [0xea209000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].282 918 1064 E OMXNodeInstance:
setConfig(0xea209004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].282 918 11689 E OMXNodeInstance:
getParameter(0xea209004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].283 918 11716 E OMXNodeInstance:
getConfig(0xea209004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].284 918 1820 E OMXNodeInstance:
getConfig(0xea209004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].390 918 31780 E VDO_LOG : GetDecoderAPI hWrapper 0xea1bf810
05-19 [Link].390 918 31780 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].390 918 31780 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].390 918 31780 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].391 918 31780 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16770
05-19 [Link].391 918 31780 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2b8d000
05-19 [Link].391 918 31780 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].394 918 31786 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31786
05-19 [Link].395 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26502 hint:-1
pid:918 duration:0 => ret_hdl:26502
05-19 [Link].395 479 1594 I libPowerHal: [PE] scn:2 hdl:26502
lock_user:[email protected] pid:918 tid:31786 dur:0
05-19 [Link].396 918 31786 I mtkpower_client: ret_hdl:26502
05-19 [Link].410 918 31780 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].410 918 31780 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].410 918 31780 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].410 918 31780 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].410 918 31780 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].560 918 31723 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].579 918 31723 I mtkpower_client: perf_lock_rel, hdl:26494,
tid:31723
05-19 [Link].580 918 31723 I mtkpower_client: perf_lock_rel, hdl:26493,
tid:31723
05-19 [Link].580 479 1594 I libPowerHal: [PD] scn:0 hdl:26494
lock_user:[email protected] pid:918 tid:31729 dur:0
05-19 [Link].675 918 31785 I mtkpower_client: perf_lock_rel, hdl:26502,
tid:31785
05-19 [Link].675 918 31785 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31785
05-19 [Link].676 479 1594 I libPowerHal: [PD] scn:2 hdl:26502
lock_user:[email protected] pid:918 tid:31786 dur:0
05-19 [Link].677 918 31785 I mtkpower_client: ret_hdl:26503
05-19 [Link].677 918 31785 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31785
05-19 [Link].678 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26503 hint:-1
pid:918 duration:0 => ret_hdl:26503
05-19 [Link].678 479 1594 I libPowerHal: [PE] scn:0 hdl:26503
lock_user:[email protected] pid:918 tid:31785 dur:0
05-19 [Link].679 918 31785 I mtkpower_client: ret_hdl:26504
05-19 [Link].679 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26504 hint:-1
pid:918 duration:0 => ret_hdl:26504
05-19 [Link].679 479 1594 I libPowerHal: [PE] scn:2 hdl:26504
lock_user:[email protected] pid:918 tid:31785 dur:0
05-19 [Link].933 918 31785 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31785
05-19 [Link].934 918 31785 I mtkpower_client: ret_hdl:26508
05-19 [Link].934 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26508 hint:-1
pid:918 duration:0 => ret_hdl:26508
05-19 [Link].934 479 1594 I libPowerHal: [PE] scn:5 hdl:26508
lock_user:[email protected] pid:918 tid:31785 dur:0
05-19 [Link].006 918 1820 E OMXNodeInstance:
setParameter(0xea480004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].007 918 1820 E OMXNodeInstance:
getParameter(0xea480004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].009 918 1820 E MtkOmxVdecEx: [0xea480000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].009 918 1820 E OMXNodeInstance:
setConfig(0xea480004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].009 918 1820 E OMXNodeInstance:
getParameter(0xea480004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].010 918 1820 E OMXNodeInstance:
getConfig(0xea480004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].010 918 1820 E OMXNodeInstance:
getConfig(0xea480004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].055 918 31825 E VDO_LOG : GetDecoderAPI hWrapper 0xea07e810
05-19 [Link].055 918 31825 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].055 918 31825 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].059 918 31825 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].059 918 31825 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 59189
05-19 [Link].059 918 31825 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfad6000
05-19 [Link].059 918 31825 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].061 918 31785 I mtkpower_client: perf_lock_rel, hdl:26508,
tid:31785
05-19 [Link].061 918 31831 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31831
05-19 [Link].064 479 1594 I libPowerHal: [PD] scn:5 hdl:26508
lock_user:[email protected] pid:918 tid:31785 dur:0
05-19 [Link].068 918 31831 I mtkpower_client: ret_hdl:26511
05-19 [Link].068 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26511 hint:-1
pid:918 duration:0 => ret_hdl:26511
05-19 [Link].068 479 1594 I libPowerHal: [PE] scn:1 hdl:26511
lock_user:[email protected] pid:918 tid:31831 dur:0
05-19 [Link].117 918 31825 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].117 918 31825 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].117 918 31825 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].117 918 31825 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].117 918 31825 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].255 918 31779 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].269 918 31779 I mtkpower_client: perf_lock_rel, hdl:26508,
tid:31779
05-19 [Link].270 918 31779 I mtkpower_client: perf_lock_rel, hdl:26504,
tid:31779
05-19 [Link].270 918 31779 I mtkpower_client: perf_lock_rel, hdl:26503,
tid:31779
05-19 [Link].270 918 31779 I mtkpower_client: perf_lock_rel, hdl:26502,
tid:31779
05-19 [Link].271 479 1594 I libPowerHal: [PD] scn:2 hdl:26504
lock_user:[email protected] pid:918 tid:31785 dur:0
05-19 [Link].272 479 1594 I libPowerHal: [PD] scn:0 hdl:26503
lock_user:[email protected] pid:918 tid:31785 dur:0
05-19 [Link].348 918 31830 I mtkpower_client: perf_lock_rel, hdl:26511,
tid:31830
05-19 [Link].348 918 31830 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31830
05-19 [Link].349 479 1594 I libPowerHal: [PD] scn:1 hdl:26511
lock_user:[email protected] pid:918 tid:31831 dur:0
05-19 [Link].350 918 31830 I mtkpower_client: ret_hdl:26512
05-19 [Link].350 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26512 hint:-1
pid:918 duration:0 => ret_hdl:26512
05-19 [Link].350 479 1594 I libPowerHal: [PE] scn:0 hdl:26512
lock_user:[email protected] pid:918 tid:31830 dur:0
05-19 [Link].139 918 11716 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].139 918 11716 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].142 918 11716 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].142 918 11716 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].142 918 11716 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].143 918 11716 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].143 918 11716 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].202 918 31875 E VDO_LOG : GetDecoderAPI hWrapper 0xea1bf810
05-19 [Link].203 918 31875 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].203 918 31875 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].205 918 31875 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].205 918 31875 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16770
05-19 [Link].205 918 31875 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe255e000
05-19 [Link].205 918 31875 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].207 918 31880 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31880
05-19 [Link].210 918 31880 I mtkpower_client: ret_hdl:26518
05-19 [Link].210 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26518 hint:-1
pid:918 duration:0 => ret_hdl:26518
05-19 [Link].210 479 1594 I libPowerHal: [PE] scn:2 hdl:26518
lock_user:[email protected] pid:918 tid:31880 dur:0
05-19 [Link].243 918 31875 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].243 918 31875 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].243 918 31875 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].243 918 31875 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].243 918 31875 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].250 918 31830 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31830
05-19 [Link].252 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26519 hint:-1
pid:918 duration:0 => ret_hdl:26519
05-19 [Link].252 479 1594 I libPowerHal: [PE] scn:3 hdl:26519
lock_user:[email protected] pid:918 tid:31830 dur:0
05-19 [Link].252 918 31830 I mtkpower_client: ret_hdl:26519
05-19 [Link].426 918 31824 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].462 918 31824 I mtkpower_client: perf_lock_rel, hdl:26519,
tid:31824
05-19 [Link].462 918 31824 I mtkpower_client: perf_lock_rel, hdl:26512,
tid:31824
05-19 [Link].463 918 31824 I mtkpower_client: perf_lock_rel, hdl:26511,
tid:31824
05-19 [Link].463 479 1594 I libPowerHal: [PD] scn:3 hdl:26519
lock_user:[email protected] pid:918 tid:31830 dur:0
05-19 [Link].464 479 1594 I libPowerHal: [PD] scn:0 hdl:26512
lock_user:[email protected] pid:918 tid:31830 dur:0
05-19 [Link].525 918 31879 I mtkpower_client: perf_lock_rel, hdl:26518,
tid:31879
05-19 [Link].525 918 31879 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31879
05-19 [Link].525 479 1594 I libPowerHal: [PD] scn:2 hdl:26518
lock_user:[email protected] pid:918 tid:31880 dur:0
05-19 [Link].527 918 31879 I mtkpower_client: ret_hdl:26523
05-19 [Link].527 918 31879 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31879
05-19 [Link].527 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26523 hint:-1
pid:918 duration:0 => ret_hdl:26523
05-19 [Link].527 479 1594 I libPowerHal: [PE] scn:3 hdl:26523
lock_user:[email protected] pid:918 tid:31879 dur:0
05-19 [Link].528 918 31879 I mtkpower_client: ret_hdl:26524
05-19 [Link].528 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26524 hint:-1
pid:918 duration:0 => ret_hdl:26524
05-19 [Link].528 479 1594 I libPowerHal: [PE] scn:2 hdl:26524
lock_user:[email protected] pid:918 tid:31879 dur:0
05-19 [Link].604 918 11716 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].604 918 1064 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 1064 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].606 918 1064 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 1064 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 1064 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].607 918 1064 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].641 918 31921 E VDO_LOG : GetDecoderAPI hWrapper 0xea07e810
05-19 [Link].641 918 31921 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].641 918 31921 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].642 918 31921 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].644 918 31921 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 59189
05-19 [Link].644 918 31921 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe055d000
05-19 [Link].644 918 31921 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].647 918 31928 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31928
05-19 [Link].649 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26527 hint:-1
pid:918 duration:0 => ret_hdl:26527
05-19 [Link].649 479 1594 I libPowerHal: [PE] scn:1 hdl:26527
lock_user:[email protected] pid:918 tid:31928 dur:0
05-19 [Link].649 918 31928 I mtkpower_client: ret_hdl:26527
05-19 [Link].666 918 31921 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].666 918 31921 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].666 918 31921 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].666 918 31921 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].666 918 31921 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].703 918 31879 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31879
05-19 [Link].704 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26528 hint:-1
pid:918 duration:0 => ret_hdl:26528
05-19 [Link].704 479 1594 I libPowerHal: [PE] scn:4 hdl:26528
lock_user:[email protected] pid:918 tid:31879 dur:0
05-19 [Link].704 918 31879 I mtkpower_client: ret_hdl:26528
05-19 [Link].848 918 31872 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].864 918 31872 I mtkpower_client: perf_lock_rel, hdl:26528,
tid:31872
05-19 [Link].864 918 31872 I mtkpower_client: perf_lock_rel, hdl:26524,
tid:31872
05-19 [Link].864 918 31872 I mtkpower_client: perf_lock_rel, hdl:26523,
tid:31872
05-19 [Link].864 918 31872 I mtkpower_client: perf_lock_rel, hdl:26518,
tid:31872
05-19 [Link].864 918 31927 I mtkpower_client: perf_lock_rel, hdl:26527,
tid:31927
05-19 [Link].865 918 31927 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31927
05-19 [Link].866 479 1594 I libPowerHal: [PD] scn:4 hdl:26528
lock_user:[email protected] pid:918 tid:31879 dur:0
05-19 [Link].867 479 1594 I libPowerHal: [PD] scn:2 hdl:26524
lock_user:[email protected] pid:918 tid:31879 dur:0
05-19 [Link].867 479 1594 I libPowerHal: [PD] scn:3 hdl:26523
lock_user:[email protected] pid:918 tid:31879 dur:0
05-19 [Link].869 479 1594 I libPowerHal: [PD] scn:1 hdl:26527
lock_user:[email protected] pid:918 tid:31928 dur:0
05-19 [Link].870 918 31927 I mtkpower_client: ret_hdl:26529
05-19 [Link].872 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26529 hint:-1
pid:918 duration:0 => ret_hdl:26529
05-19 [Link].872 479 1594 I libPowerHal: [PE] scn:2 hdl:26529
lock_user:[email protected] pid:918 tid:31927 dur:0
05-19 [Link].795 918 1064 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].795 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].799 918 1064 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].799 918 1064 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].800 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].800 918 1064 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].801 918 1064 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].929 918 31973 E VDO_LOG : GetDecoderAPI hWrapper 0xea1bf810
05-19 [Link].929 918 31973 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].929 918 31973 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].930 918 31973 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].930 918 31973 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16770
05-19 [Link].930 918 31973 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2a8e000
05-19 [Link].930 918 31973 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].956 918 31989 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31989
05-19 [Link].957 918 31989 I mtkpower_client: ret_hdl:26535
05-19 [Link].957 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26535 hint:-1
pid:918 duration:0 => ret_hdl:26535
05-19 [Link].957 479 1594 I libPowerHal: [PE] scn:1 hdl:26535
lock_user:[email protected] pid:918 tid:31989 dur:0
05-19 [Link].992 918 31920 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].998 918 31973 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].998 918 31973 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].998 918 31973 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].999 918 31973 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].999 918 31973 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].024 918 31920 I mtkpower_client: perf_lock_rel, hdl:26529,
tid:31920
05-19 [Link].025 918 31920 I mtkpower_client: perf_lock_rel, hdl:26527,
tid:31920
05-19 [Link].025 479 1594 I libPowerHal: [PD] scn:2 hdl:26529
lock_user:[email protected] pid:918 tid:31927 dur:0
05-19 [Link].244 918 1960 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].244 918 1960 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1960 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].247 918 1960 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1960 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1960 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].248 918 1960 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].267 918 31988 I mtkpower_client: perf_lock_rel, hdl:26535,
tid:31988
05-19 [Link].268 918 31988 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31988
05-19 [Link].268 479 1594 I libPowerHal: [PD] scn:1 hdl:26535
lock_user:[email protected] pid:918 tid:31989 dur:0
05-19 [Link].269 918 31988 I mtkpower_client: ret_hdl:26541
05-19 [Link].269 918 31988 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:31988
05-19 [Link].269 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26541 hint:-1
pid:918 duration:0 => ret_hdl:26541
05-19 [Link].269 479 1594 I libPowerHal: [PE] scn:0 hdl:26541
lock_user:[email protected] pid:918 tid:31988 dur:0
05-19 [Link].270 918 31988 I mtkpower_client: ret_hdl:26542
05-19 [Link].270 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26542 hint:-1
pid:918 duration:0 => ret_hdl:26542
05-19 [Link].270 479 1594 I libPowerHal: [PE] scn:1 hdl:26542
lock_user:[email protected] pid:918 tid:31988 dur:0
05-19 [Link].405 918 32048 E VDO_LOG : GetDecoderAPI hWrapper 0xea079810
05-19 [Link].406 918 32048 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].406 918 32048 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].407 918 32048 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].407 918 32048 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 43569
05-19 [Link].407 918 32048 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf292000
05-19 [Link].407 918 32048 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].420 918 32055 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32055
05-19 [Link].422 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26543 hint:-1
pid:918 duration:0 => ret_hdl:26543
05-19 [Link].422 479 1594 I libPowerHal: [PE] scn:3 hdl:26543
lock_user:[email protected] pid:918 tid:32055 dur:0
05-19 [Link].423 918 32055 I mtkpower_client: ret_hdl:26543
05-19 [Link].456 918 32048 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].456 918 32048 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].456 918 32048 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].456 918 32048 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].456 918 32048 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].516 918 31972 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].540 918 31972 I mtkpower_client: perf_lock_rel, hdl:26542,
tid:31972
05-19 [Link].540 918 31972 I mtkpower_client: perf_lock_rel, hdl:26541,
tid:31972
05-19 [Link].540 918 31972 I mtkpower_client: perf_lock_rel, hdl:26535,
tid:31972
05-19 [Link].541 479 1594 I libPowerHal: [PD] scn:1 hdl:26542
lock_user:[email protected] pid:918 tid:31988 dur:0
05-19 [Link].542 479 1594 I libPowerHal: [PD] scn:0 hdl:26541
lock_user:[email protected] pid:918 tid:31988 dur:0
05-19 [Link].790 918 32054 I mtkpower_client: perf_lock_rel, hdl:26543,
tid:32054
05-19 [Link].790 918 32054 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32054
05-19 [Link].791 479 1594 I libPowerHal: [PD] scn:3 hdl:26543
lock_user:[email protected] pid:918 tid:32055 dur:0
05-19 [Link].792 918 32054 I mtkpower_client: ret_hdl:26544
05-19 [Link].792 918 32054 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32054
05-19 [Link].793 918 32054 I mtkpower_client: ret_hdl:26545
05-19 [Link].793 918 32054 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32054
05-19 [Link].794 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26544 hint:-1
pid:918 duration:0 => ret_hdl:26544
05-19 [Link].794 479 1594 I libPowerHal: [PE] scn:0 hdl:26544
lock_user:[email protected] pid:918 tid:32054 dur:0
05-19 [Link].795 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26545 hint:-1
pid:918 duration:0 => ret_hdl:26545
05-19 [Link].795 479 1594 I libPowerHal: [PE] scn:1 hdl:26545
lock_user:[email protected] pid:918 tid:32054 dur:0
05-19 [Link].797 918 32054 I mtkpower_client: ret_hdl:26546
05-19 [Link].798 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26546 hint:-1
pid:918 duration:0 => ret_hdl:26546
05-19 [Link].798 479 1594 I libPowerHal: [PE] scn:3 hdl:26546
lock_user:[email protected] pid:918 tid:32054 dur:0
05-19 [Link].863 918 32054 I mtkpower_client: perf_lock_rel, hdl:26546,
tid:32054
05-19 [Link].864 479 1594 I libPowerHal: [PD] scn:3 hdl:26546
lock_user:[email protected] pid:918 tid:32054 dur:0
05-19 [Link].943 918 32054 I mtkpower_client: perf_lock_rel, hdl:26545,
tid:32054
05-19 [Link].943 479 1594 I libPowerHal: [PD] scn:1 hdl:26545
lock_user:[email protected] pid:918 tid:32054 dur:0
05-19 [Link].155 918 1721 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].155 918 1721 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].158 918 1721 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].158 918 1721 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].158 918 1721 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].158 918 1721 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].159 918 1721 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].238 918 32094 E VDO_LOG : GetDecoderAPI hWrapper 0xea1bf810
05-19 [Link].238 918 32094 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].238 918 32094 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].241 918 32094 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].241 918 32094 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 549
05-19 [Link].241 918 32094 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2bbc000
05-19 [Link].241 918 32094 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].243 918 32100 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32100
05-19 [Link].244 918 32100 I mtkpower_client: ret_hdl:26550
05-19 [Link].244 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26550 hint:-1
pid:918 duration:0 => ret_hdl:26550
05-19 [Link].244 479 1594 I libPowerHal: [PE] scn:1 hdl:26550
lock_user:[email protected] pid:918 tid:32100 dur:0
05-19 [Link].254 918 32094 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].254 918 32094 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].254 918 32094 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].254 918 32094 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].254 918 32094 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].387 918 32047 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].396 918 32099 I mtkpower_client: perf_lock_rel, hdl:26550,
tid:32099
05-19 [Link].397 918 32099 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32099
05-19 [Link].399 479 1594 I libPowerHal: [PD] scn:1 hdl:26550
lock_user:[email protected] pid:918 tid:32100 dur:0
05-19 [Link].400 918 32099 I mtkpower_client: ret_hdl:26553
05-19 [Link].401 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26553 hint:-1
pid:918 duration:0 => ret_hdl:26553
05-19 [Link].401 479 1594 I libPowerHal: [PE] scn:2 hdl:26553
lock_user:[email protected] pid:918 tid:32099 dur:0
05-19 [Link].415 918 32047 I mtkpower_client: perf_lock_rel, hdl:26546,
tid:32047
05-19 [Link].416 918 32047 I mtkpower_client: perf_lock_rel, hdl:26545,
tid:32047
05-19 [Link].417 918 32047 I mtkpower_client: perf_lock_rel, hdl:26544,
tid:32047
05-19 [Link].418 918 32047 I mtkpower_client: perf_lock_rel, hdl:26543,
tid:32047
05-19 [Link].418 479 1594 I libPowerHal: [PD] scn:0 hdl:26544
lock_user:[email protected] pid:918 tid:32054 dur:0
05-19 [Link].038 918 32099 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32099
05-19 [Link].038 918 32099 I mtkpower_client: ret_hdl:26554
05-19 [Link].039 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26554 hint:-1
pid:918 duration:0 => ret_hdl:26554
05-19 [Link].040 479 1594 I libPowerHal: [PE] scn:0 hdl:26554
lock_user:[email protected] pid:918 tid:32099 dur:0
05-19 [Link].131 918 32099 I mtkpower_client: perf_lock_rel, hdl:26554,
tid:32099
05-19 [Link].133 479 1594 I libPowerHal: [PD] scn:0 hdl:26554
lock_user:[email protected] pid:918 tid:32099 dur:0
05-19 [Link].943 918 1721 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].943 918 5033 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].948 918 13399 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].948 918 13399 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].948 918 13399 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].949 918 1820 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].950 918 1820 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].026 918 32142 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f78810
05-19 [Link].026 918 32142 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].026 918 32142 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].027 918 32142 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].028 918 32142 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 33915
05-19 [Link].028 918 32142 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf69a000
05-19 [Link].028 918 32142 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].039 918 32148 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32148
05-19 [Link].041 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26560 hint:-1
pid:918 duration:0 => ret_hdl:26560
05-19 [Link].041 479 1594 I libPowerHal: [PE] scn:1 hdl:26560
lock_user:[email protected] pid:918 tid:32148 dur:0
05-19 [Link].041 918 32148 I mtkpower_client: ret_hdl:26560
05-19 [Link].052 918 32142 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].052 918 32142 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].053 918 32142 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].053 918 32142 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].053 918 32142 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].104 918 32099 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32099
05-19 [Link].105 918 32099 I mtkpower_client: ret_hdl:26561
05-19 [Link].106 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26561 hint:-1
pid:918 duration:0 => ret_hdl:26561
05-19 [Link].106 479 1594 I libPowerHal: [PE] scn:3 hdl:26561
lock_user:[email protected] pid:918 tid:32099 dur:0
05-19 [Link].253 918 32093 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].264 918 32093 I mtkpower_client: perf_lock_rel, hdl:26561,
tid:32093
05-19 [Link].265 479 1594 I libPowerHal: [PD] scn:3 hdl:26561
lock_user:[email protected] pid:918 tid:32099 dur:0
05-19 [Link].267 918 32093 I mtkpower_client: perf_lock_rel, hdl:26553,
tid:32093
05-19 [Link].268 918 32093 I mtkpower_client: perf_lock_rel, hdl:26550,
tid:32093
05-19 [Link].268 479 1594 I libPowerHal: [PD] scn:2 hdl:26553
lock_user:[email protected] pid:918 tid:32099 dur:0
05-19 [Link].325 918 32147 I mtkpower_client: perf_lock_rel, hdl:26560,
tid:32147
05-19 [Link].325 918 32147 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32147
05-19 [Link].326 479 1594 I libPowerHal: [PD] scn:1 hdl:26560
lock_user:[email protected] pid:918 tid:32148 dur:0
05-19 [Link].327 918 32147 I mtkpower_client: ret_hdl:26562
05-19 [Link].327 918 32147 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32147
05-19 [Link].327 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26562 hint:-1
pid:918 duration:0 => ret_hdl:26562
05-19 [Link].327 479 1594 I libPowerHal: [PE] scn:2 hdl:26562
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].330 918 32147 I mtkpower_client: ret_hdl:26563
05-19 [Link].331 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26563 hint:-1
pid:918 duration:0 => ret_hdl:26563
05-19 [Link].331 479 1594 I libPowerHal: [PE] scn:1 hdl:26563
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].378 918 32147 I mtkpower_client: perf_lock_rel, hdl:26563,
tid:32147
05-19 [Link].380 479 1594 I libPowerHal: [PD] scn:1 hdl:26563
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].848 918 1064 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].848 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].850 918 1064 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].850 918 1064 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].850 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].850 918 1064 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].851 918 1064 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].941 918 32191 E VDO_LOG : GetDecoderAPI hWrapper 0xea1bf810
05-19 [Link].942 918 32191 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].942 918 32191 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].945 918 32191 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].945 918 32191 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 92455
05-19 [Link].945 918 32191 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].945 918 32191 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].950 918 32198 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32198
05-19 [Link].951 918 32198 I mtkpower_client: ret_hdl:26567
05-19 [Link].954 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26567 hint:-1
pid:918 duration:0 => ret_hdl:26567
05-19 [Link].954 479 1594 I libPowerHal: [PE] scn:0 hdl:26567
lock_user:[email protected] pid:918 tid:32198 dur:0
05-19 [Link].993 918 32191 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].993 918 32191 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].994 918 32191 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].994 918 32191 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].994 918 32191 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].387 918 32190 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].395 918 32190 I mtkpower_client: perf_lock_rel, hdl:26567,
tid:32190
05-19 [Link].400 479 1594 I libPowerHal: [PD] scn:0 hdl:26567
lock_user:[email protected] pid:918 tid:32198 dur:0
05-19 [Link].696 918 32147 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32147
05-19 [Link].698 918 32147 I mtkpower_client: ret_hdl:26569
05-19 [Link].698 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26569 hint:-1
pid:918 duration:0 => ret_hdl:26569
05-19 [Link].698 479 1594 I libPowerHal: [PE] scn:0 hdl:26569
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].832 918 32147 I mtkpower_client: perf_lock_rel, hdl:26569,
tid:32147
05-19 [Link].833 479 1594 I libPowerHal: [PD] scn:0 hdl:26569
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].964 918 32147 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32147
05-19 [Link].966 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26570 hint:-1
pid:918 duration:0 => ret_hdl:26570
05-19 [Link].966 479 1594 I libPowerHal: [PE] scn:0 hdl:26570
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].968 918 32147 I mtkpower_client: ret_hdl:26570
05-19 [Link].037 918 32147 I mtkpower_client: perf_lock_rel, hdl:26570,
tid:32147
05-19 [Link].038 479 1594 I libPowerHal: [PD] scn:0 hdl:26570
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].763 918 32147 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32147
05-19 [Link].764 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26571 hint:-1
pid:918 duration:0 => ret_hdl:26571
05-19 [Link].764 479 1594 I libPowerHal: [PE] scn:0 hdl:26571
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].764 918 32147 I mtkpower_client: ret_hdl:26571
05-19 [Link].020 918 32147 I mtkpower_client: perf_lock_rel, hdl:26571,
tid:32147
05-19 [Link].021 479 1594 I libPowerHal: [PD] scn:0 hdl:26571
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].823 918 11689 E OMXNodeInstance:
setParameter(0xea2bd004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].824 918 11689 E OMXNodeInstance:
getParameter(0xea2bd004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].831 918 5033 E MtkOmxVdecEx: [0xea2bd000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].831 918 5033 E OMXNodeInstance:
setConfig(0xea2bd004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].832 918 1960 E OMXNodeInstance:
getParameter(0xea2bd004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].832 918 5033 E OMXNodeInstance:
getConfig(0xea2bd004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].833 918 9097 E OMXNodeInstance:
getConfig(0xea2bd004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].904 918 32240 E VDO_LOG : GetDecoderAPI hWrapper 0xea1bf810
05-19 [Link].904 918 32240 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].904 918 32240 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].905 918 32240 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].905 918 32240 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 92455
05-19 [Link].905 918 32240 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].905 918 32240 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].908 918 32244 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32244
05-19 [Link].910 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26577 hint:-1
pid:918 duration:0 => ret_hdl:26577
05-19 [Link].910 479 1594 I libPowerHal: [PE] scn:1 hdl:26577
lock_user:[email protected] pid:918 tid:32244 dur:0
05-19 [Link].912 918 32244 I mtkpower_client: ret_hdl:26577
05-19 [Link].914 918 32240 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].914 918 32240 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].914 918 32240 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].914 918 32240 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].914 918 32240 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].987 918 32147 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32147
05-19 [Link].988 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26578 hint:-1
pid:918 duration:0 => ret_hdl:26578
05-19 [Link].989 479 1594 I libPowerHal: [PE] scn:3 hdl:26578
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].989 918 32147 I mtkpower_client: ret_hdl:26578
05-19 [Link].113 918 32141 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].133 918 32141 I mtkpower_client: perf_lock_rel, hdl:26578,
tid:32141
05-19 [Link].133 918 32141 I mtkpower_client: perf_lock_rel, hdl:26562,
tid:32141
05-19 [Link].133 918 32141 I mtkpower_client: perf_lock_rel, hdl:26560,
tid:32141
05-19 [Link].134 479 1594 I libPowerHal: [PD] scn:3 hdl:26578
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].135 479 1594 I libPowerHal: [PD] scn:2 hdl:26562
lock_user:[email protected] pid:918 tid:32147 dur:0
05-19 [Link].288 918 32243 I mtkpower_client: perf_lock_rel, hdl:26577,
tid:32243
05-19 [Link].288 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].289 479 1594 I libPowerHal: [PD] scn:1 hdl:26577
lock_user:[email protected] pid:918 tid:32244 dur:0
05-19 [Link].290 918 32243 I mtkpower_client: ret_hdl:26579
05-19 [Link].290 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].290 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26579 hint:-1
pid:918 duration:0 => ret_hdl:26579
05-19 [Link].290 479 1594 I libPowerHal: [PE] scn:1 hdl:26579
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].291 918 32243 I mtkpower_client: ret_hdl:26580
05-19 [Link].291 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].291 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26580 hint:-1
pid:918 duration:0 => ret_hdl:26580
05-19 [Link].291 479 1594 I libPowerHal: [PE] scn:2 hdl:26580
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].292 918 32243 I mtkpower_client: ret_hdl:26581
05-19 [Link].293 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26581 hint:-1
pid:918 duration:0 => ret_hdl:26581
05-19 [Link].293 479 1594 I libPowerHal: [PE] scn:3 hdl:26581
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].428 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].429 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26582 hint:-1
pid:918 duration:0 => ret_hdl:26582
05-19 [Link].429 479 1594 I libPowerHal: [PE] scn:4 hdl:26582
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].430 918 32243 I mtkpower_client: ret_hdl:26582
05-19 [Link].602 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].603 918 32243 I mtkpower_client: ret_hdl:26583
05-19 [Link].603 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26583 hint:-1
pid:918 duration:0 => ret_hdl:26583
05-19 [Link].603 479 1594 I libPowerHal: [PE] scn:5 hdl:26583
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].689 918 32243 I mtkpower_client: perf_lock_rel, hdl:26583,
tid:32243
05-19 [Link].690 918 32243 I mtkpower_client: perf_lock_rel, hdl:26582,
tid:32243
05-19 [Link].690 479 1594 I libPowerHal: [PD] scn:5 hdl:26583
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].693 479 1594 I libPowerHal: [PD] scn:4 hdl:26582
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].834 918 32243 I mtkpower_client: perf_lock_rel, hdl:26581,
tid:32243
05-19 [Link].835 479 1594 I libPowerHal: [PD] scn:3 hdl:26581
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].917 918 32243 I mtkpower_client: perf_lock_rel, hdl:26580,
tid:32243
05-19 [Link].918 479 1594 I libPowerHal: [perfLockRel] hdl:26580, idx:2
05-19 [Link].918 479 1594 I libPowerHal: [PD] scn:2 hdl:26580
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].918 479 1594 I libPowerHal: [email protected]: cpu_ctrl set cpu
freq: 1000000 1000000 1000000 1000000
05-19 [Link].442 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].444 918 32243 I mtkpower_client: ret_hdl:26588
05-19 [Link].445 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26588 hint:-1
pid:918 duration:0 => ret_hdl:26588
05-19 [Link].445 479 1594 I libPowerHal: [PE] scn:0 hdl:26588
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].633 918 32243 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32243
05-19 [Link].634 918 32243 I mtkpower_client: ret_hdl:26589
05-19 [Link].635 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26589 hint:-1
pid:918 duration:0 => ret_hdl:26589
05-19 [Link].635 479 1594 I libPowerHal: [PE] scn:2 hdl:26589
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].839 918 32243 I mtkpower_client: perf_lock_rel, hdl:26589,
tid:32243
05-19 [Link].840 479 1594 I libPowerHal: [PD] scn:2 hdl:26589
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].216 918 32243 I mtkpower_client: perf_lock_rel, hdl:26588,
tid:32243
05-19 [Link].218 479 1594 I libPowerHal: [PD] scn:0 hdl:26588
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].763 918 32239 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].785 918 32239 I mtkpower_client: perf_lock_rel, hdl:26583,
tid:32239
05-19 [Link].786 918 32239 I mtkpower_client: perf_lock_rel, hdl:26582,
tid:32239
05-19 [Link].786 918 32239 I mtkpower_client: perf_lock_rel, hdl:26589,
tid:32239
05-19 [Link].786 918 32239 I mtkpower_client: perf_lock_rel, hdl:26588,
tid:32239
05-19 [Link].786 918 32239 I mtkpower_client: perf_lock_rel, hdl:26579,
tid:32239
05-19 [Link].786 918 32239 I mtkpower_client: perf_lock_rel, hdl:26577,
tid:32239
05-19 [Link].788 918 32239 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].789 918 32239 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].790 918 32239 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].790 918 32239 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].792 479 1594 I libPowerHal: [PD] scn:1 hdl:26579
lock_user:[email protected] pid:918 tid:32243 dur:0
05-19 [Link].665 918 13399 E OMXNodeInstance:
setParameter(0xea2bd004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].666 918 9097 E OMXNodeInstance:
getParameter(0xea2bd004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].668 918 15538 E MtkOmxVdecEx: [0xea2bd000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].668 918 15538 E OMXNodeInstance:
setConfig(0xea2bd004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].669 918 15538 E OMXNodeInstance:
getParameter(0xea2bd004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].669 918 15538 E OMXNodeInstance:
getConfig(0xea2bd004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].669 918 15538 E OMXNodeInstance:
getConfig(0xea2bd004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].767 918 32317 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].768 918 32317 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].769 918 32317 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].769 918 32317 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].770 918 32317 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].772 918 32317 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].772 918 32317 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].772 918 32317 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].790 918 32317 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].790 918 32317 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 92455
05-19 [Link].793 918 32317 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].793 918 32317 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].797 918 32324 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32324
05-19 [Link].798 918 32324 I mtkpower_client: ret_hdl:26602
05-19 [Link].798 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26602 hint:-1
pid:918 duration:0 => ret_hdl:26602
05-19 [Link].798 479 1594 I libPowerHal: [PE] scn:0 hdl:26602
lock_user:[email protected] pid:918 tid:32324 dur:0
05-19 [Link].805 918 32317 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].805 918 32317 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].805 918 32317 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].805 918 32317 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].805 918 32317 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].223 918 32323 I mtkpower_client: perf_lock_rel, hdl:26602,
tid:32323
05-19 [Link].223 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].228 479 1594 I libPowerHal: [PD] scn:0 hdl:26602
lock_user:[email protected] pid:918 tid:32324 dur:0
05-19 [Link].229 918 32323 I mtkpower_client: ret_hdl:26603
05-19 [Link].229 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].230 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26603 hint:-1
pid:918 duration:0 => ret_hdl:26603
05-19 [Link].230 479 1594 I libPowerHal: [PE] scn:0 hdl:26603
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].230 918 32323 I mtkpower_client: ret_hdl:26604
05-19 [Link].230 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].232 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26604 hint:-1
pid:918 duration:0 => ret_hdl:26604
05-19 [Link].232 479 1594 I libPowerHal: [PE] scn:1 hdl:26604
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].233 918 32323 I mtkpower_client: ret_hdl:26605
05-19 [Link].233 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].234 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26605 hint:-1
pid:918 duration:0 => ret_hdl:26605
05-19 [Link].234 479 1594 I libPowerHal: [PE] scn:2 hdl:26605
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].235 918 32323 I mtkpower_client: ret_hdl:26606
05-19 [Link].235 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].236 918 32323 I mtkpower_client: ret_hdl:26607
05-19 [Link].236 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].237 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26606 hint:-1
pid:918 duration:0 => ret_hdl:26606
05-19 [Link].237 479 1594 I libPowerHal: [PE] scn:3 hdl:26606
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].237 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26607 hint:-1
pid:918 duration:0 => ret_hdl:26607
05-19 [Link].237 479 1594 I libPowerHal: [PE] scn:4 hdl:26607
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].238 918 32323 I mtkpower_client: ret_hdl:26608
05-19 [Link].238 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26608 hint:-1
pid:918 duration:0 => ret_hdl:26608
05-19 [Link].238 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].238 479 1594 I libPowerHal: [PE] scn:5 hdl:26608
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].239 918 32323 I mtkpower_client: ret_hdl:26609
05-19 [Link].239 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].239 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26609 hint:-1
pid:918 duration:0 => ret_hdl:26609
05-19 [Link].239 479 1594 I libPowerHal: [PE] scn:6 hdl:26609
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].241 918 32323 I mtkpower_client: ret_hdl:26610
05-19 [Link].241 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26610 hint:-1
pid:918 duration:0 => ret_hdl:26610
05-19 [Link].241 479 1594 I libPowerHal: [PE] scn:7 hdl:26610
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].178 918 32323 I mtkpower_client: perf_lock_rel, hdl:26610,
tid:32323
05-19 [Link].179 479 1594 I libPowerHal: [PD] scn:7 hdl:26610
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].213 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].213 918 32323 I mtkpower_client: ret_hdl:26612
05-19 [Link].213 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26612 hint:-1
pid:918 duration:0 => ret_hdl:26612
05-19 [Link].214 479 1594 I libPowerHal: [PE] scn:7 hdl:26612
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].444 918 32323 I mtkpower_client: perf_lock_rel, hdl:26612,
tid:32323
05-19 [Link].446 479 1594 I libPowerHal: [PD] scn:7 hdl:26612
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].527 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].529 918 32323 I mtkpower_client: ret_hdl:26613
05-19 [Link].529 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26613 hint:-1
pid:918 duration:0 => ret_hdl:26613
05-19 [Link].529 479 1594 I libPowerHal: [PE] scn:7 hdl:26613
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].678 918 32323 I mtkpower_client: perf_lock_rel, hdl:26613,
tid:32323
05-19 [Link].679 479 1594 I libPowerHal: [PD] scn:7 hdl:26613
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].800 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].800 918 32323 I mtkpower_client: ret_hdl:26615
05-19 [Link].800 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26615 hint:-1
pid:918 duration:0 => ret_hdl:26615
05-19 [Link].800 479 1594 I libPowerHal: [PE] scn:7 hdl:26615
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].014 918 32323 I mtkpower_client: perf_lock_rel, hdl:26615,
tid:32323
05-19 [Link].015 479 1594 I libPowerHal: [PD] scn:7 hdl:26615
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].063 918 32323 I mtkpower_client: perf_lock_rel, hdl:26609,
tid:32323
05-19 [Link].064 479 1594 I libPowerHal: [PD] scn:6 hdl:26609
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].134 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].135 918 32323 I mtkpower_client: ret_hdl:26616
05-19 [Link].135 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].135 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26616 hint:-1
pid:918 duration:0 => ret_hdl:26616
05-19 [Link].135 479 1594 I libPowerHal: [PE] scn:6 hdl:26616
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].136 918 32323 I mtkpower_client: ret_hdl:26617
05-19 [Link].138 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26617 hint:-1
pid:918 duration:0 => ret_hdl:26617
05-19 [Link].138 479 1594 I libPowerHal: [PE] scn:7 hdl:26617
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].265 918 32323 I mtkpower_client: perf_lock_rel, hdl:26617,
tid:32323
05-19 [Link].265 479 1594 I libPowerHal: [PD] scn:7 hdl:26617
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].337 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].338 918 32323 I mtkpower_client: ret_hdl:26618
05-19 [Link].338 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26618 hint:-1
pid:918 duration:0 => ret_hdl:26618
05-19 [Link].338 479 1594 I libPowerHal: [PE] scn:7 hdl:26618
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].448 918 32323 I mtkpower_client: perf_lock_rel, hdl:26618,
tid:32323
05-19 [Link].449 918 32323 I mtkpower_client: perf_lock_rel, hdl:26616,
tid:32323
05-19 [Link].449 918 32323 I mtkpower_client: perf_lock_rel, hdl:26608,
tid:32323
05-19 [Link].449 918 32323 I mtkpower_client: perf_lock_rel, hdl:26607,
tid:32323
05-19 [Link].449 479 1594 I libPowerHal: [PD] scn:7 hdl:26618
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].450 479 1594 I libPowerHal: [PD] scn:6 hdl:26616
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].452 479 1594 I libPowerHal: [PD] scn:5 hdl:26608
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].452 479 1594 I libPowerHal: [PD] scn:4 hdl:26607
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].570 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].570 918 32323 I mtkpower_client: ret_hdl:26620
05-19 [Link].570 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26620 hint:-1
pid:918 duration:0 => ret_hdl:26620
05-19 [Link].571 479 1594 I libPowerHal: [PE] scn:4 hdl:26620
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].642 918 32323 I mtkpower_client: perf_lock_rel, hdl:26620,
tid:32323
05-19 [Link].642 918 32323 I mtkpower_client: perf_lock_rel, hdl:26606,
tid:32323
05-19 [Link].643 479 1594 I libPowerHal: [PD] scn:4 hdl:26620
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].645 479 1594 I libPowerHal: [PD] scn:3 hdl:26606
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].937 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].938 918 32323 I mtkpower_client: ret_hdl:26621
05-19 [Link].938 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26621 hint:-1
pid:918 duration:0 => ret_hdl:26621
05-19 [Link].938 479 1594 I libPowerHal: [PE] scn:3 hdl:26621
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].027 918 32323 I mtkpower_client: perf_lock_rel, hdl:26621,
tid:32323
05-19 [Link].028 479 1594 I libPowerHal: [PD] scn:3 hdl:26621
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].115 918 32323 I mtkpower_client: perf_lock_rel, hdl:26605,
tid:32323
05-19 [Link].116 479 1594 I libPowerHal: [PD] scn:2 hdl:26605
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].399 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].401 918 32323 I mtkpower_client: ret_hdl:26623
05-19 [Link].401 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26623 hint:-1
pid:918 duration:0 => ret_hdl:26623
05-19 [Link].401 479 1594 I libPowerHal: [PE] scn:2 hdl:26623
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].397 918 32323 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32323
05-19 [Link].398 918 32323 I mtkpower_client: ret_hdl:26624
05-19 [Link].398 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26624 hint:-1
pid:918 duration:0 => ret_hdl:26624
05-19 [Link].398 479 1594 I libPowerHal: [PE] scn:3 hdl:26624
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].485 918 32323 I mtkpower_client: perf_lock_rel, hdl:26624,
tid:32323
05-19 [Link].486 479 1594 I libPowerHal: [PD] scn:3 hdl:26624
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].816 918 32323 I mtkpower_client: perf_lock_rel, hdl:26623,
tid:32323
05-19 [Link].817 479 1594 I libPowerHal: [PD] scn:2 hdl:26623
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].898 918 32323 I mtkpower_client: perf_lock_rel, hdl:26604,
tid:32323
05-19 [Link].899 479 1594 I libPowerHal: [PD] scn:1 hdl:26604
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].830 918 32316 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].844 918 32316 I mtkpower_client: perf_lock_rel, hdl:26618,
tid:32316
05-19 [Link].844 918 32316 I mtkpower_client: perf_lock_rel, hdl:26616,
tid:32316
05-19 [Link].844 918 32316 I mtkpower_client: perf_lock_rel, hdl:26608,
tid:32316
05-19 [Link].845 918 32316 I mtkpower_client: perf_lock_rel, hdl:26620,
tid:32316
05-19 [Link].845 918 32316 I mtkpower_client: perf_lock_rel, hdl:26624,
tid:32316
05-19 [Link].845 918 32316 I mtkpower_client: perf_lock_rel, hdl:26623,
tid:32316
05-19 [Link].845 918 32316 I mtkpower_client: perf_lock_rel, hdl:26604,
tid:32316
05-19 [Link].845 918 32316 I mtkpower_client: perf_lock_rel, hdl:26603,
tid:32316
05-19 [Link].845 918 32316 I mtkpower_client: perf_lock_rel, hdl:26602,
tid:32316
05-19 [Link].847 918 32316 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].848 918 32316 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].848 918 32316 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].848 918 32316 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].849 479 1594 I libPowerHal: [PD] scn:0 hdl:26603
lock_user:[email protected] pid:918 tid:32323 dur:0
05-19 [Link].292 918 11716 E OMXNodeInstance:
setParameter(0xea2bd004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].293 918 1064 E OMXNodeInstance:
getParameter(0xea2bd004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].297 918 1064 E MtkOmxVdecEx: [0xea2bd000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].297 918 1064 E OMXNodeInstance:
setConfig(0xea2bd004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].298 918 9097 E OMXNodeInstance:
getParameter(0xea2bd004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].298 918 9097 E OMXNodeInstance:
getConfig(0xea2bd004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].298 918 1065 E OMXNodeInstance:
getConfig(0xea2bd004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].329 918 32377 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].329 918 32377 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].329 918 32377 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].329 918 32377 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].329 918 32377 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].330 918 32377 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].330 918 32377 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].330 918 32377 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].333 918 32377 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].333 918 32377 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 105297
05-19 [Link].333 918 32377 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].333 918 32377 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].335 918 32382 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32382
05-19 [Link].336 918 32382 I mtkpower_client: ret_hdl:26635
05-19 [Link].336 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26635 hint:-1
pid:918 duration:0 => ret_hdl:26635
05-19 [Link].336 479 1594 I libPowerHal: [PE] scn:1 hdl:26635
lock_user:[email protected] pid:918 tid:32382 dur:0
05-19 [Link].350 918 32377 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].350 918 32377 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].350 918 32377 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].350 918 32377 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].351 918 32377 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].567 918 32381 I mtkpower_client: perf_lock_rel, hdl:26635,
tid:32381
05-19 [Link].568 918 32381 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32381
05-19 [Link].569 479 1594 I libPowerHal: [PD] scn:1 hdl:26635
lock_user:[email protected] pid:918 tid:32382 dur:0
05-19 [Link].571 918 32381 I mtkpower_client: ret_hdl:26636
05-19 [Link].571 918 32381 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32381
05-19 [Link].571 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26636 hint:-1
pid:918 duration:0 => ret_hdl:26636
05-19 [Link].571 479 1594 I libPowerHal: [PE] scn:1 hdl:26636
lock_user:[email protected] pid:918 tid:32381 dur:0
05-19 [Link].572 918 32381 I mtkpower_client: ret_hdl:26637
05-19 [Link].572 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26637 hint:-1
pid:918 duration:0 => ret_hdl:26637
05-19 [Link].572 479 1594 I libPowerHal: [PE] scn:2 hdl:26637
lock_user:[email protected] pid:918 tid:32381 dur:0
05-19 [Link].690 918 32381 I mtkpower_client: perf_lock_rel, hdl:26637,
tid:32381
05-19 [Link].692 479 1594 I libPowerHal: [PD] scn:2 hdl:26637
lock_user:[email protected] pid:918 tid:32381 dur:0
05-19 [Link].173 918 9097 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].173 918 11716 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].178 918 11689 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].178 918 11689 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].178 918 11689 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].179 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].180 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].226 918 32420 E VDO_LOG : GetDecoderAPI hWrapper 0xe9ef7810
05-19 [Link].226 918 32420 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].227 918 32420 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].228 918 32420 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].228 918 32420 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8287
05-19 [Link].228 918 32420 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde393000
05-19 [Link].228 918 32420 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].230 918 32425 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32425
05-19 [Link].231 918 32425 I mtkpower_client: ret_hdl:26643
05-19 [Link].232 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26643 hint:-1
pid:918 duration:0 => ret_hdl:26643
05-19 [Link].232 479 1594 I libPowerHal: [PE] scn:2 hdl:26643
lock_user:[email protected] pid:918 tid:32425 dur:0
05-19 [Link].249 918 32420 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].249 918 32420 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].249 918 32420 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].250 918 32420 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].250 918 32420 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].398 918 32376 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].449 918 32376 I mtkpower_client: perf_lock_rel, hdl:26637,
tid:32376
05-19 [Link].449 918 32376 I mtkpower_client: perf_lock_rel, hdl:26636,
tid:32376
05-19 [Link].449 918 32376 I mtkpower_client: perf_lock_rel, hdl:26635,
tid:32376
05-19 [Link].451 479 1594 I libPowerHal: [PD] scn:1 hdl:26636
lock_user:[email protected] pid:918 tid:32381 dur:0
05-19 [Link].480 918 32424 I mtkpower_client: perf_lock_rel, hdl:26643,
tid:32424
05-19 [Link].480 918 32424 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32424
05-19 [Link].481 479 1594 I libPowerHal: [PD] scn:2 hdl:26643
lock_user:[email protected] pid:918 tid:32425 dur:0
05-19 [Link].482 918 32424 I mtkpower_client: ret_hdl:26644
05-19 [Link].482 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26644 hint:-1
pid:918 duration:0 => ret_hdl:26644
05-19 [Link].482 479 1594 I libPowerHal: [PE] scn:1 hdl:26644
lock_user:[email protected] pid:918 tid:32424 dur:0
05-19 [Link].498 918 32424 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32424
05-19 [Link].500 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26650 hint:-1
pid:918 duration:0 => ret_hdl:26650
05-19 [Link].500 479 1594 I libPowerHal: [PE] scn:2 hdl:26650
lock_user:[email protected] pid:918 tid:32424 dur:0
05-19 [Link].501 918 32424 I mtkpower_client: ret_hdl:26650
05-19 [Link].774 918 32424 I mtkpower_client: perf_lock_rel, hdl:26650,
tid:32424
05-19 [Link].775 479 1594 I libPowerHal: [PD] scn:2 hdl:26650
lock_user:[email protected] pid:918 tid:32424 dur:0
05-19 [Link].822 918 32419 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].838 918 32419 I mtkpower_client: perf_lock_rel, hdl:26650,
tid:32419
05-19 [Link].839 918 32419 I mtkpower_client: perf_lock_rel, hdl:26644,
tid:32419
05-19 [Link].839 918 32419 I mtkpower_client: perf_lock_rel, hdl:26643,
tid:32419
05-19 [Link].840 479 1594 I libPowerHal: [PD] scn:1 hdl:26644
lock_user:[email protected] pid:918 tid:32424 dur:0
05-19 [Link].840 918 32419 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].842 918 32419 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].842 918 32419 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].842 918 32419 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].918 917 917 E wificond: vivo add tx_good 104566 tx_bad 60
rx_good 168350 tx_retry 15337
05-19 [Link].850 918 1721 E OMXNodeInstance:
setParameter(0xea4f2804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].851 918 1820 E OMXNodeInstance:
getParameter(0xea4f2804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].857 918 1820 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].857 918 1820 E OMXNodeInstance:
setConfig(0xea4f2804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].858 918 5020 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].859 918 1820 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].893 918 32675 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].893 918 32675 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].895 918 32675 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].895 918 32675 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].895 918 32675 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].966 918 32675 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].038 918 32675 E MtkOmxVdecEx: [0xea4f2800] ret 0, wait fence 42
took 10526 us
05-19 [Link].824 918 32674 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].826 918 32674 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].826 918 32674 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].826 918 32674 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].129 918 1820 E OMXNodeInstance:
setParameter(0xea4f2804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].129 918 1820 E OMXNodeInstance:
getParameter(0xea4f2804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].133 918 1820 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].133 918 1820 E OMXNodeInstance:
setConfig(0xea4f2804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].133 918 1820 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].134 918 1820 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].174 918 32706 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].174 918 32706 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].175 918 32706 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].175 918 32706 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].176 918 32706 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].198 918 32706 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].354 918 1820 E OMXNodeInstance:
setParameter(0xea21f804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].355 918 5020 E OMXNodeInstance:
getParameter(0xea21f804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].359 918 1820 E MtkOmxVdecEx: [0xea21f800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].359 918 1820 E OMXNodeInstance:
setConfig(0xea21f804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].359 918 1064 E OMXNodeInstance:
getParameter(0xea21f804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].359 918 1064 E OMXNodeInstance:
getConfig(0xea21f804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].360 918 11716 E OMXNodeInstance:
getConfig(0xea21f804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].441 918 32721 E VDO_LOG : GetDecoderAPI hWrapper 0xea079810
05-19 [Link].442 918 32721 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].442 918 32721 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].543 918 32721 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].543 918 32721 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 49159
05-19 [Link].543 918 32721 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe070a000
05-19 [Link].543 918 32721 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
960, Offset 0, Padding 0
05-19 [Link].549 918 32725 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32725
05-19 [Link].551 918 32725 I mtkpower_client: ret_hdl:26707
05-19 [Link].552 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26707 hint:-1
pid:918 duration:0 => ret_hdl:26707
05-19 [Link].552 479 1594 I libPowerHal: [PE] scn:0 hdl:26707
lock_user:[email protected] pid:918 tid:32725 dur:0
05-19 [Link].558 918 32721 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].558 918 32721 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].559 918 32721 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].559 918 32721 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].559 918 32721 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].721 918 32724 I mtkpower_client: perf_lock_rel, hdl:26707,
tid:32724
05-19 [Link].721 918 32724 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32724
05-19 [Link].722 479 1594 I libPowerHal: [PD] scn:0 hdl:26707
lock_user:[email protected] pid:918 tid:32725 dur:0
05-19 [Link].723 918 32724 I mtkpower_client: ret_hdl:26716
05-19 [Link].723 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26716 hint:-1
pid:918 duration:0 => ret_hdl:26716
05-19 [Link].723 479 1594 I libPowerHal: [PE] scn:1 hdl:26716
lock_user:[email protected] pid:918 tid:32724 dur:0
05-19 [Link].016 918 1784 E OMXNodeInstance:
setParameter(0xea4f2804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].017 918 1784 E OMXNodeInstance:
getParameter(0xea4f2804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].021 918 1784 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].021 918 1784 E OMXNodeInstance:
setConfig(0xea4f2804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].022 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].024 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].103 918 32767 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].193 918 32724 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32724
05-19 [Link].195 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26730 hint:-1
pid:918 duration:0 => ret_hdl:26730
05-19 [Link].195 479 1594 I libPowerHal: [PE] scn:0 hdl:26730
lock_user:[email protected] pid:918 tid:32724 dur:0
05-19 [Link].195 918 32724 I mtkpower_client: ret_hdl:26730
05-19 [Link].195 918 32724 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:32724
05-19 [Link].196 918 32724 I mtkpower_client: ret_hdl:26731
05-19 [Link].197 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26731 hint:-1
pid:918 duration:0 => ret_hdl:26731
05-19 [Link].197 479 1594 I libPowerHal: [PE] scn:2 hdl:26731
lock_user:[email protected] pid:918 tid:32724 dur:0
05-19 [Link].392 918 32724 I mtkpower_client: perf_lock_rel, hdl:26731,
tid:32724
05-19 [Link].393 479 1594 I libPowerHal: [PD] scn:2 hdl:26731
lock_user:[email protected] pid:918 tid:32724 dur:0
05-19 [Link].223 918 32720 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].237 918 32720 I mtkpower_client: perf_lock_rel, hdl:26731,
tid:32720
05-19 [Link].237 918 32720 I mtkpower_client: perf_lock_rel, hdl:26730,
tid:32720
05-19 [Link].237 918 32720 I mtkpower_client: perf_lock_rel, hdl:26716,
tid:32720
05-19 [Link].238 918 32720 I mtkpower_client: perf_lock_rel, hdl:26707,
tid:32720
05-19 [Link].238 479 1594 I libPowerHal: [PD] scn:0 hdl:26730
lock_user:[email protected] pid:918 tid:32724 dur:0
05-19 [Link].240 479 1594 I libPowerHal: [PD] scn:1 hdl:26716
lock_user:[email protected] pid:918 tid:32724 dur:0
05-19 [Link].155 918 11716 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].155 918 15538 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].159 918 1064 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].159 918 1064 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].160 918 1064 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].160 918 13399 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].161 918 15538 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].193 918 346 E VDO_LOG : GetDecoderAPI hWrapper 0xea037810
05-19 [Link].193 918 346 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].193 918 346 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].195 918 346 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].195 918 346 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16909
05-19 [Link].196 918 346 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe165f000
05-19 [Link].196 918 346 E VDO_LOG : vp9_dec_init() u4Width 512, u4Height
896, Offset 0, Padding 0
05-19 [Link].200 918 356 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:356
05-19 [Link].201 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26742 hint:-1
pid:918 duration:0 => ret_hdl:26742
05-19 [Link].201 479 1594 I libPowerHal: [PE] scn:0 hdl:26742
lock_user:[email protected] pid:918 tid:356 dur:0
05-19 [Link].202 918 356 I mtkpower_client: ret_hdl:26742
05-19 [Link].206 918 346 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].206 918 346 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].206 918 346 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].206 918 346 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].206 918 346 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].004 918 355 I mtkpower_client: perf_lock_rel, hdl:26742, tid:355
05-19 [Link].005 918 355 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:355
05-19 [Link].009 479 1594 I libPowerHal: [PD] scn:0 hdl:26742
lock_user:[email protected] pid:918 tid:356 dur:0
05-19 [Link].014 918 355 I mtkpower_client: ret_hdl:26743
05-19 [Link].015 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26743 hint:-1
pid:918 duration:0 => ret_hdl:26743
05-19 [Link].015 479 1594 I libPowerHal: [PE] scn:0 hdl:26743
lock_user:[email protected] pid:918 tid:355 dur:0
05-19 [Link].049 918 1784 E OMXNodeInstance:
setParameter(0xea4f2804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].049 918 1784 E OMXNodeInstance:
getParameter(0xea4f2804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].054 918 1784 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].054 918 1784 E OMXNodeInstance:
setConfig(0xea4f2804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].055 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].057 918 1784 E OMXNodeInstance:
getConfig(0xea4f2804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].130 918 515 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].172 918 5020 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].173 918 9097 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].176 918 5020 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].176 918 5020 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].177 918 15538 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].177 918 9097 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].178 918 15538 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].259 918 545 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].260 918 545 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].260 918 545 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].260 918 545 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].260 918 545 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 13419
05-19 [Link].260 918 545 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdb7b5000
05-19 [Link].260 918 545 E VDO_LOG : vp9_dec_init() u4Width 512, u4Height
896, Offset 0, Padding 0
05-19 [Link].263 918 555 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:555
05-19 [Link].265 918 555 I mtkpower_client: ret_hdl:26744
05-19 [Link].265 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26744 hint:-1
pid:918 duration:0 => ret_hdl:26744
05-19 [Link].265 479 1594 I libPowerHal: [PE] scn:1 hdl:26744
lock_user:[email protected] pid:918 tid:555 dur:0
05-19 [Link].272 918 545 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].273 918 545 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].273 918 545 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].273 918 545 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].273 918 545 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].517 918 553 I mtkpower_client: perf_lock_rel, hdl:26744, tid:553
05-19 [Link].517 918 553 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:553
05-19 [Link].518 479 1594 I libPowerHal: [PD] scn:1 hdl:26744
lock_user:[email protected] pid:918 tid:555 dur:0
05-19 [Link].520 918 553 I mtkpower_client: ret_hdl:26745
05-19 [Link].520 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26745 hint:-1
pid:918 duration:0 => ret_hdl:26745
05-19 [Link].520 479 1594 I libPowerHal: [PE] scn:2 hdl:26745
lock_user:[email protected] pid:918 tid:553 dur:0
05-19 [Link].577 918 345 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].588 918 345 I mtkpower_client: perf_lock_rel, hdl:26743, tid:345
05-19 [Link].589 479 1594 I libPowerHal: [PD] scn:0 hdl:26743
lock_user:[email protected] pid:918 tid:355 dur:0
05-19 [Link].590 918 345 I mtkpower_client: perf_lock_rel, hdl:26742, tid:345
05-19 [Link].990 918 544 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].002 918 544 I mtkpower_client: perf_lock_rel, hdl:26745, tid:544
05-19 [Link].002 918 544 I mtkpower_client: perf_lock_rel, hdl:26744, tid:544
05-19 [Link].003 479 1594 I libPowerHal: [PD] scn:2 hdl:26745
lock_user:[email protected] pid:918 tid:553 dur:0
05-19 [Link].148 918 1820 E OMXNodeInstance:
setParameter(0xea4f1004:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].150 918 5020 E OMXNodeInstance:
getParameter(0xea4f1004:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].155 918 5020 E MtkOmxVdecEx: [0xea4f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].155 918 5020 E OMXNodeInstance:
setConfig(0xea4f1004:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].156 918 5020 E OMXNodeInstance:
getConfig(0xea4f1004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].158 918 5020 E OMXNodeInstance:
getConfig(0xea4f1004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].163 918 5020 E OMXNodeInstance:
setParameter(0xea20a804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].165 918 5020 E OMXNodeInstance:
getParameter(0xea20a804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].168 918 5020 E MtkOmxVdecEx: [0xea20a800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].169 918 5020 E OMXNodeInstance:
setConfig(0xea20a804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].169 918 5020 E OMXNodeInstance:
getParameter(0xea20a804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].170 918 5020 E OMXNodeInstance:
getConfig(0xea20a804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].171 918 1820 E OMXNodeInstance:
getConfig(0xea20a804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].260 918 847 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].277 918 861 E VDO_LOG : GetDecoderAPI hWrapper 0xe9eca810
05-19 [Link].277 918 861 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].277 918 861 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].293 918 861 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].293 918 861 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 45504
05-19 [Link].299 918 861 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfa5c000
05-19 [Link].299 918 861 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].305 918 892 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:892
05-19 [Link].307 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26752 hint:-1
pid:918 duration:0 => ret_hdl:26752
05-19 [Link].307 479 1594 I libPowerHal: [PE] scn:0 hdl:26752
lock_user:[email protected] pid:918 tid:892 dur:0
05-19 [Link].309 918 892 I mtkpower_client: ret_hdl:26752
05-19 [Link].361 918 861 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].361 918 861 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].361 918 861 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].361 918 861 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].361 918 861 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].718 918 891 I mtkpower_client: perf_lock_rel, hdl:26752, tid:891
05-19 [Link].719 918 891 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:891
05-19 [Link].720 479 1594 I libPowerHal: [PD] scn:0 hdl:26752
lock_user:[email protected] pid:918 tid:892 dur:0
05-19 [Link].721 918 891 I mtkpower_client: ret_hdl:26753
05-19 [Link].721 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26753 hint:-1
pid:918 duration:0 => ret_hdl:26753
05-19 [Link].721 479 1594 I libPowerHal: [PE] scn:0 hdl:26753
lock_user:[email protected] pid:918 tid:891 dur:0
05-19 [Link].242 918 5020 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].242 918 1820 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].247 918 1784 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].247 918 1784 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].252 918 1784 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].252 918 11689 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].253 918 11689 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].319 918 1261 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].319 918 1261 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].319 918 1261 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].321 918 1261 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].321 918 1261 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 46440
05-19 [Link].321 918 1261 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe459d000
05-19 [Link].321 918 1261 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].326 918 1266 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1266
05-19 [Link].328 918 1266 I mtkpower_client: ret_hdl:26755
05-19 [Link].328 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26755 hint:-1
pid:918 duration:0 => ret_hdl:26755
05-19 [Link].328 479 1594 I libPowerHal: [PE] scn:1 hdl:26755
lock_user:[email protected] pid:918 tid:1266 dur:0
05-19 [Link].341 918 1261 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].342 918 1261 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].343 918 1261 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].343 918 1261 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].343 918 1261 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].546 918 1265 I mtkpower_client: perf_lock_rel, hdl:26755,
tid:1265
05-19 [Link].547 918 1265 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1265
05-19 [Link].548 479 1594 I libPowerHal: [PD] scn:1 hdl:26755
lock_user:[email protected] pid:918 tid:1266 dur:0
05-19 [Link].548 918 1265 I mtkpower_client: ret_hdl:26757
05-19 [Link].548 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26757 hint:-1
pid:918 duration:0 => ret_hdl:26757
05-19 [Link].549 479 1594 I libPowerHal: [PE] scn:1 hdl:26757
lock_user:[email protected] pid:918 tid:1265 dur:0
05-19 [Link].707 918 1260 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].707 918 854 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].716 918 854 I mtkpower_client: perf_lock_rel, hdl:26753, tid:854
05-19 [Link].717 918 854 I mtkpower_client: perf_lock_rel, hdl:26752, tid:854
05-19 [Link].717 479 1594 I libPowerHal: [PD] scn:0 hdl:26753
lock_user:[email protected] pid:918 tid:891 dur:0
05-19 [Link].718 918 1260 I mtkpower_client: perf_lock_rel, hdl:26757,
tid:1260
05-19 [Link].718 918 1260 I mtkpower_client: perf_lock_rel, hdl:26755,
tid:1260
05-19 [Link].721 479 1594 I libPowerHal: [PD] scn:1 hdl:26757
lock_user:[email protected] pid:918 tid:1265 dur:0
05-19 [Link].785 918 1260 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].788 918 1260 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].788 918 1260 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].788 918 1260 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].482 918 1960 E OMXNodeInstance:
setParameter(0xea2e8004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].483 918 1960 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 1960 E MtkOmxVdecEx: [0xea2e8000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].485 918 1960 E OMXNodeInstance:
setConfig(0xea2e8004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].486 918 1960 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].486 918 1960 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].487 918 1960 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].520 918 1421 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].520 918 1421 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].521 918 1421 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].521 918 1421 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].521 918 1421 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].522 918 1421 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].522 918 1421 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].523 918 1421 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].588 918 1421 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].588 918 1421 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 49159
05-19 [Link].588 918 1421 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].588 918 1421 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
960, Offset 0, Padding 0
05-19 [Link].590 918 1450 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1450
05-19 [Link].591 918 1450 I mtkpower_client: ret_hdl:26758
05-19 [Link].592 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26758 hint:-1
pid:918 duration:0 => ret_hdl:26758
05-19 [Link].592 479 1594 I libPowerHal: [PE] scn:0 hdl:26758
lock_user:[email protected] pid:918 tid:1450 dur:0
05-19 [Link].606 918 1421 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].606 918 1421 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].606 918 1421 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].606 918 1421 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].606 918 1421 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].771 918 1446 I mtkpower_client: perf_lock_rel, hdl:26758,
tid:1446
05-19 [Link].771 918 1446 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1446
05-19 [Link].772 479 1594 I libPowerHal: [PD] scn:0 hdl:26758
lock_user:[email protected] pid:918 tid:1450 dur:0
05-19 [Link].773 918 1446 I mtkpower_client: ret_hdl:26760
05-19 [Link].773 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26760 hint:-1
pid:918 duration:0 => ret_hdl:26760
05-19 [Link].773 479 1594 I libPowerHal: [PE] scn:2 hdl:26760
lock_user:[email protected] pid:918 tid:1446 dur:0
05-19 [Link].062 918 1420 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].069 918 1420 I mtkpower_client: perf_lock_rel, hdl:26760,
tid:1420
05-19 [Link].070 918 1420 I mtkpower_client: perf_lock_rel, hdl:26758,
tid:1420
05-19 [Link].070 479 1594 I libPowerHal: [PD] scn:2 hdl:26760
lock_user:[email protected] pid:918 tid:1446 dur:0
05-19 [Link].071 918 1420 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].071 918 1420 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].071 918 1420 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].071 918 1420 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].573 918 1721 E OMXNodeInstance:
setParameter(0xea2e8004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].573 918 1721 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].576 918 1721 E MtkOmxVdecEx: [0xea2e8000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].576 918 1721 E OMXNodeInstance:
setConfig(0xea2e8004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].576 918 1721 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].577 918 1721 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].577 918 1721 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].741 918 1632 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].742 918 1632 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].742 918 1632 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].742 918 1632 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].742 918 1632 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].746 918 1632 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].746 918 1632 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].746 918 1632 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].749 918 1632 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].750 918 1632 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 143082
05-19 [Link].750 918 1632 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].750 918 1632 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].754 918 1678 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1678
05-19 [Link].755 918 1678 I mtkpower_client: ret_hdl:26761
05-19 [Link].755 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26761 hint:-1
pid:918 duration:0 => ret_hdl:26761
05-19 [Link].755 479 1594 I libPowerHal: [PE] scn:0 hdl:26761
lock_user:[email protected] pid:918 tid:1678 dur:0
05-19 [Link].767 918 1632 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].767 918 1632 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].767 918 1632 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].767 918 1632 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].767 918 1632 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].935 918 1677 I mtkpower_client: perf_lock_rel, hdl:26761,
tid:1677
05-19 [Link].935 918 1677 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1677
05-19 [Link].936 479 1594 I libPowerHal: [PD] scn:0 hdl:26761
lock_user:[email protected] pid:918 tid:1678 dur:0
05-19 [Link].937 918 1677 I mtkpower_client: ret_hdl:26765
05-19 [Link].937 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26765 hint:-1
pid:918 duration:0 => ret_hdl:26765
05-19 [Link].937 479 1594 I libPowerHal: [PE] scn:0 hdl:26765
lock_user:[email protected] pid:918 tid:1677 dur:0
05-19 [Link].044 918 1721 E OMXNodeInstance:
setParameter(0xea2e9804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].044 918 11689 E OMXNodeInstance:
getParameter(0xea2e9804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].048 918 6021 E MtkOmxVdecEx: [0xea2e9800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].048 918 6021 E OMXNodeInstance:
setConfig(0xea2e9804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].048 918 1064 E OMXNodeInstance:
getParameter(0xea2e9804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].048 918 32761 E OMXNodeInstance:
getConfig(0xea2e9804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].049 918 11716 E OMXNodeInstance:
getConfig(0xea2e9804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].092 918 1757 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].092 918 1757 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].092 918 1757 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].093 918 1757 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].093 918 1757 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 57807
05-19 [Link].093 918 1757 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde5d2000
05-19 [Link].093 918 1757 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].101 918 1763 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1763
05-19 [Link].103 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26768 hint:-1
pid:918 duration:0 => ret_hdl:26768
05-19 [Link].103 479 1594 I libPowerHal: [PE] scn:2 hdl:26768
lock_user:[email protected] pid:918 tid:1763 dur:0
05-19 [Link].104 918 1763 I mtkpower_client: ret_hdl:26768
05-19 [Link].106 918 1757 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].106 918 1757 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].106 918 1757 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].106 918 1757 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].106 918 1757 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].275 918 1631 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].296 918 1631 I mtkpower_client: perf_lock_rel, hdl:26765,
tid:1631
05-19 [Link].296 918 1631 I mtkpower_client: perf_lock_rel, hdl:26761,
tid:1631
05-19 [Link].302 479 1594 I libPowerHal: [PD] scn:0 hdl:26765
lock_user:[email protected] pid:918 tid:1677 dur:0
05-19 [Link].417 918 1762 I mtkpower_client: perf_lock_rel, hdl:26768,
tid:1762
05-19 [Link].417 918 1762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1762
05-19 [Link].417 479 1594 I libPowerHal: [PD] scn:2 hdl:26768
lock_user:[email protected] pid:918 tid:1763 dur:0
05-19 [Link].419 918 1762 I mtkpower_client: ret_hdl:26769
05-19 [Link].419 918 1762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1762
05-19 [Link].419 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26769 hint:-1
pid:918 duration:0 => ret_hdl:26769
05-19 [Link].419 479 1594 I libPowerHal: [PE] scn:0 hdl:26769
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].420 918 1762 I mtkpower_client: ret_hdl:26770
05-19 [Link].420 918 1762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1762
05-19 [Link].420 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26770 hint:-1
pid:918 duration:0 => ret_hdl:26770
05-19 [Link].420 479 1594 I libPowerHal: [PE] scn:2 hdl:26770
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].421 918 1762 I mtkpower_client: ret_hdl:26771
05-19 [Link].421 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26771 hint:-1
pid:918 duration:0 => ret_hdl:26771
05-19 [Link].421 479 1594 I libPowerHal: [PE] scn:3 hdl:26771
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].502 918 1762 I mtkpower_client: perf_lock_rel, hdl:26771,
tid:1762
05-19 [Link].503 479 1594 I libPowerHal: [PD] scn:3 hdl:26771
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].620 918 1762 I mtkpower_client: perf_lock_rel, hdl:26770,
tid:1762
05-19 [Link].620 479 1594 I libPowerHal: [PD] scn:2 hdl:26770
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].934 918 1064 E OMXNodeInstance:
setParameter(0xea2e8004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].934 918 1064 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].938 918 1064 E MtkOmxVdecEx: [0xea2e8000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].938 918 1064 E OMXNodeInstance:
setConfig(0xea2e8004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].939 918 1064 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].939 918 1064 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].940 918 1064 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].999 918 1810 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].999 918 1810 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].000 918 1810 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].000 918 1810 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].000 918 1810 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40614
05-19 [Link].000 918 1810 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3d8e000
05-19 [Link].000 918 1810 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].006 918 1817 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1817
05-19 [Link].007 918 1817 I mtkpower_client: ret_hdl:26777
05-19 [Link].007 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26777 hint:-1
pid:918 duration:0 => ret_hdl:26777
05-19 [Link].007 479 1594 I libPowerHal: [PE] scn:3 hdl:26777
lock_user:[email protected] pid:918 tid:1817 dur:0
05-19 [Link].021 918 1810 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].021 918 1810 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].021 918 1810 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].021 918 1810 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].021 918 1810 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].175 918 1762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1762
05-19 [Link].176 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26778 hint:-1
pid:918 duration:0 => ret_hdl:26778
05-19 [Link].176 479 1594 I libPowerHal: [PE] scn:2 hdl:26778
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].176 918 1762 I mtkpower_client: ret_hdl:26778
05-19 [Link].199 917 917 E wificond: vivo add tx_good 113166 tx_bad 60
rx_good 186918 tx_retry 15413
05-19 [Link].261 918 1753 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].262 918 1816 I mtkpower_client: perf_lock_rel, hdl:26777,
tid:1816
05-19 [Link].262 918 1816 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1816
05-19 [Link].263 479 1594 I libPowerHal: [PD] scn:3 hdl:26777
lock_user:[email protected] pid:918 tid:1817 dur:0
05-19 [Link].264 918 1816 I mtkpower_client: ret_hdl:26779
05-19 [Link].264 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26779 hint:-1
pid:918 duration:0 => ret_hdl:26779
05-19 [Link].265 479 1594 I libPowerHal: [PE] scn:3 hdl:26779
lock_user:[email protected] pid:918 tid:1816 dur:0
05-19 [Link].276 918 1753 I mtkpower_client: perf_lock_rel, hdl:26771,
tid:1753
05-19 [Link].277 918 1753 I mtkpower_client: perf_lock_rel, hdl:26778,
tid:1753
05-19 [Link].277 918 1753 I mtkpower_client: perf_lock_rel, hdl:26769,
tid:1753
05-19 [Link].277 918 1753 I mtkpower_client: perf_lock_rel, hdl:26768,
tid:1753
05-19 [Link].278 479 1594 I libPowerHal: [PD] scn:2 hdl:26778
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].279 479 1594 I libPowerHal: [PD] scn:0 hdl:26769
lock_user:[email protected] pid:918 tid:1762 dur:0
05-19 [Link].566 918 1816 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1816
05-19 [Link].566 918 1816 I mtkpower_client: ret_hdl:26780
05-19 [Link].566 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26780 hint:-1
pid:918 duration:0 => ret_hdl:26780
05-19 [Link].567 479 1594 I libPowerHal: [PE] scn:0 hdl:26780
lock_user:[email protected] pid:918 tid:1816 dur:0
05-19 [Link].635 918 1816 I mtkpower_client: perf_lock_rel, hdl:26780,
tid:1816
05-19 [Link].637 479 1594 I libPowerHal: [PD] scn:0 hdl:26780
lock_user:[email protected] pid:918 tid:1816 dur:0
05-19 [Link].740 918 1065 E OMXNodeInstance:
setParameter(0xea484804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].741 918 1065 E OMXNodeInstance:
getParameter(0xea484804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].744 918 1065 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].744 918 1065 E OMXNodeInstance:
setConfig(0xea484804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].745 918 1065 E OMXNodeInstance:
getConfig(0xea484804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].746 918 1065 E OMXNodeInstance:
getConfig(0xea484804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].823 918 1869 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].000 918 1809 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].012 918 1809 I mtkpower_client: perf_lock_rel, hdl:26780,
tid:1809
05-19 [Link].012 918 1809 I mtkpower_client: perf_lock_rel, hdl:26779,
tid:1809
05-19 [Link].012 918 1809 I mtkpower_client: perf_lock_rel, hdl:26777,
tid:1809
05-19 [Link].013 479 1594 I libPowerHal: [PD] scn:3 hdl:26779
lock_user:[email protected] pid:918 tid:1816 dur:0
05-19 [Link].603 918 1065 E OMXNodeInstance:
setParameter(0xea2e8004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].604 918 1065 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 11689 E MtkOmxVdecEx: [0xea2e8000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].606 918 11689 E OMXNodeInstance:
setConfig(0xea2e8004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 11689 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 1065 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].607 918 11716 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].644 918 1888 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].645 918 1888 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].645 918 1888 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].647 918 1888 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].647 918 1888 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 31984
05-19 [Link].647 918 1888 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe43c4000
05-19 [Link].647 918 1888 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].652 918 1893 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1893
05-19 [Link].652 918 1893 I mtkpower_client: ret_hdl:26791
05-19 [Link].653 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26791 hint:-1
pid:918 duration:0 => ret_hdl:26791
05-19 [Link].653 479 1594 I libPowerHal: [PE] scn:1 hdl:26791
lock_user:[email protected] pid:918 tid:1893 dur:0
05-19 [Link].670 918 1888 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].670 918 1888 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].670 918 1888 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].670 918 1888 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].670 918 1888 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].899 918 1892 I mtkpower_client: perf_lock_rel, hdl:26791,
tid:1892
05-19 [Link].899 918 1892 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1892
05-19 [Link].900 479 1594 I libPowerHal: [PD] scn:1 hdl:26791
lock_user:[email protected] pid:918 tid:1893 dur:0
05-19 [Link].900 918 1892 I mtkpower_client: ret_hdl:26792
05-19 [Link].900 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26792 hint:-1
pid:918 duration:0 => ret_hdl:26792
05-19 [Link].901 479 1594 I libPowerHal: [PE] scn:2 hdl:26792
lock_user:[email protected] pid:918 tid:1892 dur:0
05-19 [Link].364 918 1784 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].365 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].371 918 1784 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].371 918 1784 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].372 918 1784 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].373 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].374 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].540 918 1950 E VDO_LOG : GetDecoderAPI hWrapper 0xe9ec8810
05-19 [Link].540 918 1950 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].540 918 1950 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].543 918 1950 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].543 918 1950 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 86310
05-19 [Link].543 918 1950 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdec3c000
05-19 [Link].543 918 1950 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].548 918 1962 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1962
05-19 [Link].548 918 1962 I mtkpower_client: ret_hdl:26798
05-19 [Link].549 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26798 hint:-1
pid:918 duration:0 => ret_hdl:26798
05-19 [Link].549 479 1594 I libPowerHal: [PE] scn:0 hdl:26798
lock_user:[email protected] pid:918 tid:1962 dur:0
05-19 [Link].584 918 1950 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].584 918 1950 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].584 918 1950 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].584 918 1950 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].584 918 1950 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].604 918 1887 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].621 918 1887 I mtkpower_client: perf_lock_rel, hdl:26792,
tid:1887
05-19 [Link].621 918 1887 I mtkpower_client: perf_lock_rel, hdl:26791,
tid:1887
05-19 [Link].623 479 1594 I libPowerHal: [PD] scn:2 hdl:26792
lock_user:[email protected] pid:918 tid:1892 dur:0
05-19 [Link].889 918 1961 I mtkpower_client: perf_lock_rel, hdl:26798,
tid:1961
05-19 [Link].889 918 1961 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1961
05-19 [Link].890 479 1594 I libPowerHal: [PD] scn:0 hdl:26798
lock_user:[email protected] pid:918 tid:1962 dur:0
05-19 [Link].891 918 1961 I mtkpower_client: ret_hdl:26799
05-19 [Link].891 918 1961 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1961
05-19 [Link].892 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26799 hint:-1
pid:918 duration:0 => ret_hdl:26799
05-19 [Link].892 479 1594 I libPowerHal: [PE] scn:0 hdl:26799
lock_user:[email protected] pid:918 tid:1961 dur:0
05-19 [Link].892 918 1961 I mtkpower_client: ret_hdl:26800
05-19 [Link].892 918 1961 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:1961
05-19 [Link].892 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26800 hint:-1
pid:918 duration:0 => ret_hdl:26800
05-19 [Link].892 479 1594 I libPowerHal: [PE] scn:2 hdl:26800
lock_user:[email protected] pid:918 tid:1961 dur:0
05-19 [Link].895 918 1961 I mtkpower_client: ret_hdl:26801
05-19 [Link].896 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26801 hint:-1
pid:918 duration:0 => ret_hdl:26801
05-19 [Link].896 479 1594 I libPowerHal: [PE] scn:3 hdl:26801
lock_user:[email protected] pid:918 tid:1961 dur:0
05-19 [Link].987 918 1961 I mtkpower_client: perf_lock_rel, hdl:26801,
tid:1961
05-19 [Link].988 479 1594 I libPowerHal: [PD] scn:3 hdl:26801
lock_user:[email protected] pid:918 tid:1961 dur:0
05-19 [Link].110 918 1820 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].111 918 1780 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].117 918 1784 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].117 918 1784 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].117 918 1784 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].118 918 1721 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].118 918 1721 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].158 918 2055 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].158 918 2055 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].158 918 2055 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].164 918 2055 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].164 918 2055 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 99238
05-19 [Link].164 918 2055 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2cf6000
05-19 [Link].164 918 2055 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].166 918 2066 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2066
05-19 [Link].167 918 2066 I mtkpower_client: ret_hdl:26807
05-19 [Link].167 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26807 hint:-1
pid:918 duration:0 => ret_hdl:26807
05-19 [Link].167 479 1594 I libPowerHal: [PE] scn:3 hdl:26807
lock_user:[email protected] pid:918 tid:2066 dur:0
05-19 [Link].180 918 2055 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].180 918 2055 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].180 918 2055 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].180 918 2055 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].180 918 2055 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].349 918 1949 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].360 918 1949 I mtkpower_client: perf_lock_rel, hdl:26801,
tid:1949
05-19 [Link].361 918 1949 I mtkpower_client: perf_lock_rel, hdl:26800,
tid:1949
05-19 [Link].361 918 1949 I mtkpower_client: perf_lock_rel, hdl:26799,
tid:1949
05-19 [Link].361 918 1949 I mtkpower_client: perf_lock_rel, hdl:26798,
tid:1949
05-19 [Link].367 479 1594 I libPowerHal: [PD] scn:2 hdl:26800
lock_user:[email protected] pid:918 tid:1961 dur:0
05-19 [Link].369 479 1594 I libPowerHal: [PD] scn:0 hdl:26799
lock_user:[email protected] pid:918 tid:1961 dur:0
05-19 [Link].555 918 2065 I mtkpower_client: perf_lock_rel, hdl:26807,
tid:2065
05-19 [Link].556 918 2065 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2065
05-19 [Link].556 479 1594 I libPowerHal: [PD] scn:3 hdl:26807
lock_user:[email protected] pid:918 tid:2066 dur:0
05-19 [Link].559 918 2065 I mtkpower_client: ret_hdl:26808
05-19 [Link].559 918 2065 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2065
05-19 [Link].560 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26808 hint:-1
pid:918 duration:0 => ret_hdl:26808
05-19 [Link].560 479 1594 I libPowerHal: [PE] scn:0 hdl:26808
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].561 918 2065 I mtkpower_client: ret_hdl:26809
05-19 [Link].562 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26809 hint:-1
pid:918 duration:0 => ret_hdl:26809
05-19 [Link].562 918 2065 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2065
05-19 [Link].562 479 1594 I libPowerHal: [PE] scn:2 hdl:26809
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].563 918 2065 I mtkpower_client: ret_hdl:26810
05-19 [Link].564 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26810 hint:-1
pid:918 duration:0 => ret_hdl:26810
05-19 [Link].564 479 1594 I libPowerHal: [PE] scn:3 hdl:26810
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].723 918 2065 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2065
05-19 [Link].724 918 2065 I mtkpower_client: ret_hdl:26812
05-19 [Link].724 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26812 hint:-1
pid:918 duration:0 => ret_hdl:26812
05-19 [Link].724 479 1594 I libPowerHal: [PE] scn:1 hdl:26812
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].927 918 13399 E OMXNodeInstance:
setParameter(0xea1e5804:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].927 918 1959 E OMXNodeInstance:
getParameter(0xea1e5804:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].930 918 32757 E MtkOmxVdecEx: [0xea1e5800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].930 918 32757 E OMXNodeInstance:
setConfig(0xea1e5804:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].931 918 13399 E OMXNodeInstance:
getConfig(0xea1e5804:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].932 918 5058 E OMXNodeInstance:
getConfig(0xea1e5804:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].005 918 2126 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].014 918 2065 I mtkpower_client: perf_lock_rel, hdl:26812,
tid:2065
05-19 [Link].016 479 1594 I libPowerHal: [PD] scn:1 hdl:26812
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].083 918 2054 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].112 918 2054 I mtkpower_client: perf_lock_rel, hdl:26812,
tid:2054
05-19 [Link].112 918 2054 I mtkpower_client: perf_lock_rel, hdl:26810,
tid:2054
05-19 [Link].112 918 2054 I mtkpower_client: perf_lock_rel, hdl:26809,
tid:2054
05-19 [Link].112 918 2054 I mtkpower_client: perf_lock_rel, hdl:26808,
tid:2054
05-19 [Link].112 918 2054 I mtkpower_client: perf_lock_rel, hdl:26807,
tid:2054
05-19 [Link].114 479 1594 I libPowerHal: [PD] scn:3 hdl:26810
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].116 479 1594 I libPowerHal: [PD] scn:2 hdl:26809
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].117 479 1594 I libPowerHal: [PD] scn:0 hdl:26808
lock_user:[email protected] pid:918 tid:2065 dur:0
05-19 [Link].697 918 5033 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].697 918 5033 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].699 918 5033 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].700 918 5033 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].700 918 5033 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].700 918 5033 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].701 918 5033 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].736 918 2156 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].736 918 2156 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].736 918 2156 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].739 918 2156 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].739 918 2156 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16026
05-19 [Link].739 918 2156 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4766000
05-19 [Link].741 918 2156 E VDO_LOG : vp9_dec_init() u4Width 384, u4Height
704, Offset 0, Padding 0
05-19 [Link].749 918 2168 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2168
05-19 [Link].750 918 2168 I mtkpower_client: ret_hdl:26820
05-19 [Link].750 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26820 hint:-1
pid:918 duration:0 => ret_hdl:26820
05-19 [Link].750 479 1594 I libPowerHal: [PE] scn:1 hdl:26820
lock_user:[email protected] pid:918 tid:2168 dur:0
05-19 [Link].757 918 2156 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].757 918 2156 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].757 918 2156 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].757 918 2156 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].757 918 2156 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].846 479 1594 I libPowerHal: [perfScnDumpAll] scn:1 hdl:26820
lock_user:[email protected] pid:918 tid:2168 dur:0
05-19 [Link].204 918 2167 I mtkpower_client: perf_lock_rel, hdl:26820,
tid:2167
05-19 [Link].205 918 2167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2167
05-19 [Link].208 479 1594 I libPowerHal: [PD] scn:1 hdl:26820
lock_user:[email protected] pid:918 tid:2168 dur:0
05-19 [Link].219 918 2167 I mtkpower_client: ret_hdl:26823
05-19 [Link].220 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26823 hint:-1
pid:918 duration:0 => ret_hdl:26823
05-19 [Link].220 479 1594 I libPowerHal: [PE] scn:1 hdl:26823
lock_user:[email protected] pid:918 tid:2167 dur:0
05-19 [Link].816 918 918 E OMXNodeInstance:
setParameter(0xe9f42804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].816 918 11716 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 1959 E MtkOmxVdecEx: [0xe9f42800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].826 918 1959 E OMXNodeInstance:
setConfig(0xe9f42804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 918 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 1959 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].828 918 918 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].898 918 2285 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d8d810
05-19 [Link].898 918 2285 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].898 918 2285 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].901 918 2285 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].902 918 2285 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 55534
05-19 [Link].902 918 2285 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe02f8000
05-19 [Link].902 918 2285 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].921 918 2292 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2292
05-19 [Link].924 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26827 hint:-1
pid:918 duration:0 => ret_hdl:26827
05-19 [Link].924 479 1594 I libPowerHal: [PE] scn:0 hdl:26827
lock_user:[email protected] pid:918 tid:2292 dur:0
05-19 [Link].924 918 2292 I mtkpower_client: ret_hdl:26827
05-19 [Link].968 918 2285 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].968 918 2285 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].968 918 2285 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].968 918 2285 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].968 918 2285 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].053 918 2155 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].060 918 2155 I mtkpower_client: perf_lock_rel, hdl:26823,
tid:2155
05-19 [Link].061 918 2155 I mtkpower_client: perf_lock_rel, hdl:26820,
tid:2155
05-19 [Link].061 479 1594 I libPowerHal: [PD] scn:1 hdl:26823
lock_user:[email protected] pid:918 tid:2167 dur:0
05-19 [Link].191 918 2291 I mtkpower_client: perf_lock_rel, hdl:26827,
tid:2291
05-19 [Link].192 918 2291 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2291
05-19 [Link].192 479 1594 I libPowerHal: [PD] scn:0 hdl:26827
lock_user:[email protected] pid:918 tid:2292 dur:0
05-19 [Link].193 918 2291 I mtkpower_client: ret_hdl:26830
05-19 [Link].193 918 2291 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2291
05-19 [Link].193 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26830 hint:-1
pid:918 duration:0 => ret_hdl:26830
05-19 [Link].194 479 1594 I libPowerHal: [PE] scn:1 hdl:26830
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].195 918 2291 I mtkpower_client: ret_hdl:26831
05-19 [Link].195 918 2291 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2291
05-19 [Link].195 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26831 hint:-1
pid:918 duration:0 => ret_hdl:26831
05-19 [Link].195 479 1594 I libPowerHal: [PE] scn:0 hdl:26831
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].196 918 2291 I mtkpower_client: ret_hdl:26832
05-19 [Link].197 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26832 hint:-1
pid:918 duration:0 => ret_hdl:26832
05-19 [Link].197 479 1594 I libPowerHal: [PE] scn:3 hdl:26832
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].294 918 2291 I mtkpower_client: perf_lock_rel, hdl:26832,
tid:2291
05-19 [Link].295 479 1594 I libPowerHal: [PD] scn:3 hdl:26832
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].474 918 2291 I mtkpower_client: perf_lock_rel, hdl:26831,
tid:2291
05-19 [Link].477 479 1594 I libPowerHal: [PD] scn:0 hdl:26831
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].708 918 11716 E OMXNodeInstance:
setParameter(0xea1e5804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].708 918 11716 E OMXNodeInstance:
getParameter(0xea1e5804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].714 918 11716 E MtkOmxVdecEx: [0xea1e5800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].714 918 11716 E OMXNodeInstance:
setConfig(0xea1e5804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].715 918 11716 E OMXNodeInstance:
getParameter(0xea1e5804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].716 918 11716 E OMXNodeInstance:
getConfig(0xea1e5804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].717 918 11716 E OMXNodeInstance:
getConfig(0xea1e5804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].767 918 2403 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].767 918 2403 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].767 918 2403 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].768 918 2403 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].768 918 2403 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 56340
05-19 [Link].768 918 2403 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2cf6000
05-19 [Link].768 918 2403 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].797 918 2437 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2437
05-19 [Link].798 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26836 hint:-1
pid:918 duration:0 => ret_hdl:26836
05-19 [Link].798 479 1594 I libPowerHal: [PE] scn:0 hdl:26836
lock_user:[email protected] pid:918 tid:2437 dur:0
05-19 [Link].799 918 2437 I mtkpower_client: ret_hdl:26836
05-19 [Link].841 918 2403 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].841 918 2403 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].841 918 2403 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].841 918 2403 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].841 918 2403 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].013 918 2291 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2291
05-19 [Link].014 918 2291 I mtkpower_client: ret_hdl:26837
05-19 [Link].014 918 2291 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2291
05-19 [Link].014 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26837 hint:-1
pid:918 duration:0 => ret_hdl:26837
05-19 [Link].014 479 1594 I libPowerHal: [PE] scn:4 hdl:26837
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].016 918 2291 I mtkpower_client: ret_hdl:26838
05-19 [Link].017 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26838 hint:-1
pid:918 duration:0 => ret_hdl:26838
05-19 [Link].017 479 1594 I libPowerHal: [PE] scn:5 hdl:26838
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].208 918 2291 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2291
05-19 [Link].209 918 2291 I mtkpower_client: ret_hdl:26839
05-19 [Link].210 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26839 hint:-1
pid:918 duration:0 => ret_hdl:26839
05-19 [Link].210 479 1594 I libPowerHal: [PE] scn:6 hdl:26839
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].687 918 2291 I mtkpower_client: perf_lock_rel, hdl:26839,
tid:2291
05-19 [Link].688 479 1594 I libPowerHal: [PD] scn:6 hdl:26839
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].719 918 2402 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].728 918 2402 I mtkpower_client: perf_lock_rel, hdl:26836,
tid:2402
05-19 [Link].729 479 1594 I libPowerHal: [PD] scn:0 hdl:26836
lock_user:[email protected] pid:918 tid:2437 dur:0
05-19 [Link].920 918 2291 I mtkpower_client: perf_lock_rel, hdl:26838,
tid:2291
05-19 [Link].921 479 1594 I libPowerHal: [PD] scn:5 hdl:26838
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].982 918 2291 I mtkpower_client: perf_lock_rel, hdl:26837,
tid:2291
05-19 [Link].983 479 1594 I libPowerHal: [PD] scn:4 hdl:26837
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].197 918 2284 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].216 918 2284 I mtkpower_client: perf_lock_rel, hdl:26839,
tid:2284
05-19 [Link].216 918 2284 I mtkpower_client: perf_lock_rel, hdl:26838,
tid:2284
05-19 [Link].216 918 2284 I mtkpower_client: perf_lock_rel, hdl:26837,
tid:2284
05-19 [Link].216 918 2284 I mtkpower_client: perf_lock_rel, hdl:26830,
tid:2284
05-19 [Link].216 918 2284 I mtkpower_client: perf_lock_rel, hdl:26827,
tid:2284
05-19 [Link].217 918 2284 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].218 479 1594 I libPowerHal: [PD] scn:1 hdl:26830
lock_user:[email protected] pid:918 tid:2291 dur:0
05-19 [Link].218 918 2284 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].218 918 2284 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].218 918 2284 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].193 918 5724 E OMXNodeInstance:
setParameter(0xe9f42804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].193 918 5724 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].196 918 5724 E MtkOmxVdecEx: [0xe9f42800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].196 918 5724 E OMXNodeInstance:
setConfig(0xe9f42804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].197 918 5724 E OMXNodeInstance:
getParameter(0xe9f42804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].197 918 13399 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].198 918 13399 E OMXNodeInstance:
getConfig(0xe9f42804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].476 918 2593 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].477 918 2593 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].477 918 2593 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].477 918 2593 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].477 918 2593 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].478 918 2593 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].478 918 2593 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].478 918 2593 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].482 918 2593 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].482 918 2593 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 37744
05-19 [Link].482 918 2593 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].482 918 2593 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].486 918 2621 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2621
05-19 [Link].488 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26849 hint:-1
pid:918 duration:0 => ret_hdl:26849
05-19 [Link].488 479 1594 I libPowerHal: [PE] scn:0 hdl:26849
lock_user:[email protected] pid:918 tid:2621 dur:0
05-19 [Link].489 918 2621 I mtkpower_client: ret_hdl:26849
05-19 [Link].491 918 2593 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].491 918 2593 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].491 918 2593 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].491 918 2593 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].491 918 2593 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].292 918 13399 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].293 918 5724 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].295 918 2592 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].295 918 5724 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].295 918 5724 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].295 918 5724 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].296 918 5724 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].297 918 5724 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].315 918 2592 I mtkpower_client: perf_lock_rel, hdl:26849,
tid:2592
05-19 [Link].316 479 1594 I libPowerHal: [PD] scn:0 hdl:26849
lock_user:[email protected] pid:918 tid:2621 dur:0
05-19 [Link].316 918 2592 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].317 918 2592 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].317 918 2592 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].317 918 2592 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].454 918 2681 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].454 918 2681 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].454 918 2681 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].454 918 2681 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].454 918 2681 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].457 918 2681 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].457 918 2681 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].457 918 2681 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].462 918 2681 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].462 918 2681 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 84377
05-19 [Link].462 918 2681 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1c5f000
05-19 [Link].462 918 2681 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].465 918 2692 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2692
05-19 [Link].466 918 2692 I mtkpower_client: ret_hdl:26855
05-19 [Link].466 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26855 hint:-1
pid:918 duration:0 => ret_hdl:26855
05-19 [Link].466 479 1594 I libPowerHal: [PE] scn:0 hdl:26855
lock_user:[email protected] pid:918 tid:2692 dur:0
05-19 [Link].470 918 2681 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].470 918 2681 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].470 918 2681 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].470 918 2681 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].470 918 2681 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].985 918 2691 I mtkpower_client: perf_lock_rel, hdl:26855,
tid:2691
05-19 [Link].985 918 2691 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2691
05-19 [Link].985 479 1594 I libPowerHal: [PD] scn:0 hdl:26855
lock_user:[email protected] pid:918 tid:2692 dur:0
05-19 [Link].986 918 2691 I mtkpower_client: ret_hdl:26856
05-19 [Link].986 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26856 hint:-1
pid:918 duration:0 => ret_hdl:26856
05-19 [Link].986 479 1594 I libPowerHal: [PE] scn:2 hdl:26856
lock_user:[email protected] pid:918 tid:2691 dur:0
05-19 [Link].442 918 5058 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].442 918 5724 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].445 918 918 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].445 918 918 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].445 918 5058 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].446 918 5724 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].446 918 918 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].553 918 2743 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].553 918 2743 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].553 918 2743 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].554 918 2743 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].554 918 2743 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 32900
05-19 [Link].554 918 2743 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xddc99000
05-19 [Link].554 918 2743 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].558 918 2764 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2764
05-19 [Link].560 918 2764 I mtkpower_client: ret_hdl:26862
05-19 [Link].560 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26862 hint:-1
pid:918 duration:0 => ret_hdl:26862
05-19 [Link].561 479 1594 I libPowerHal: [PE] scn:4 hdl:26862
lock_user:[email protected] pid:918 tid:2764 dur:0
05-19 [Link].566 918 2743 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].566 918 2743 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].566 918 2743 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].566 918 2743 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].566 918 2743 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].785 918 2762 I mtkpower_client: perf_lock_rel, hdl:26862,
tid:2762
05-19 [Link].786 918 2762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2762
05-19 [Link].786 479 1594 I libPowerHal: [PD] scn:4 hdl:26862
lock_user:[email protected] pid:918 tid:2764 dur:0
05-19 [Link].788 918 2762 I mtkpower_client: ret_hdl:26863
05-19 [Link].788 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26863 hint:-1
pid:918 duration:0 => ret_hdl:26863
05-19 [Link].788 479 1594 I libPowerHal: [PE] scn:1 hdl:26863
lock_user:[email protected] pid:918 tid:2762 dur:0
05-19 [Link].852 918 2680 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].870 918 2680 I mtkpower_client: perf_lock_rel, hdl:26856,
tid:2680
05-19 [Link].871 918 2680 I mtkpower_client: perf_lock_rel, hdl:26855,
tid:2680
05-19 [Link].871 479 1594 I libPowerHal: [PD] scn:2 hdl:26856
lock_user:[email protected] pid:918 tid:2691 dur:0
05-19 [Link].953 918 2762 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2762
05-19 [Link].956 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26864 hint:-1
pid:918 duration:0 => ret_hdl:26864
05-19 [Link].956 479 1594 I libPowerHal: [PE] scn:2 hdl:26864
lock_user:[email protected] pid:918 tid:2762 dur:0
05-19 [Link].957 918 2762 I mtkpower_client: ret_hdl:26864
05-19 [Link].117 918 2762 I mtkpower_client: perf_lock_rel, hdl:26864,
tid:2762
05-19 [Link].118 479 1594 I libPowerHal: [PD] scn:2 hdl:26864
lock_user:[email protected] pid:918 tid:2762 dur:0
05-19 [Link].307 918 11716 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].308 918 11716 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].312 918 11716 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].312 918 11716 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].313 918 11716 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].313 918 11716 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].315 918 11716 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].357 918 2856 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].357 918 2856 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].357 918 2856 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].358 918 2856 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].358 918 2856 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 84377
05-19 [Link].358 918 2856 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2da2000
05-19 [Link].358 918 2856 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].369 918 2867 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2867
05-19 [Link].370 918 2867 I mtkpower_client: ret_hdl:26870
05-19 [Link].370 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26870 hint:-1
pid:918 duration:0 => ret_hdl:26870
05-19 [Link].370 479 1594 I libPowerHal: [PE] scn:2 hdl:26870
lock_user:[email protected] pid:918 tid:2867 dur:0
05-19 [Link].381 918 2856 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].381 918 2856 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].381 918 2856 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].381 918 2856 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].381 918 2856 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].624 918 2740 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].632 918 2740 I mtkpower_client: perf_lock_rel, hdl:26864,
tid:2740
05-19 [Link].633 918 2740 I mtkpower_client: perf_lock_rel, hdl:26863,
tid:2740
05-19 [Link].633 479 1594 I libPowerHal: [PD] scn:1 hdl:26863
lock_user:[email protected] pid:918 tid:2762 dur:0
05-19 [Link].634 918 2740 I mtkpower_client: perf_lock_rel, hdl:26862,
tid:2740
05-19 [Link].745 918 2866 I mtkpower_client: perf_lock_rel, hdl:26870,
tid:2866
05-19 [Link].745 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].746 479 1594 I libPowerHal: [PD] scn:2 hdl:26870
lock_user:[email protected] pid:918 tid:2867 dur:0
05-19 [Link].747 918 2866 I mtkpower_client: ret_hdl:26871
05-19 [Link].747 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].747 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26871 hint:-1
pid:918 duration:0 => ret_hdl:26871
05-19 [Link].748 479 1594 I libPowerHal: [PE] scn:1 hdl:26871
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].748 918 2866 I mtkpower_client: ret_hdl:26872
05-19 [Link].748 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].748 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26872 hint:-1
pid:918 duration:0 => ret_hdl:26872
05-19 [Link].748 479 1594 I libPowerHal: [PE] scn:2 hdl:26872
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].749 918 2866 I mtkpower_client: ret_hdl:26873
05-19 [Link].749 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].749 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26873 hint:-1
pid:918 duration:0 => ret_hdl:26873
05-19 [Link].749 479 1594 I libPowerHal: [PE] scn:3 hdl:26873
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].750 918 2866 I mtkpower_client: ret_hdl:26874
05-19 [Link].750 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26874 hint:-1
pid:918 duration:0 => ret_hdl:26874
05-19 [Link].751 479 1594 I libPowerHal: [PE] scn:4 hdl:26874
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].822 918 2866 I mtkpower_client: perf_lock_rel, hdl:26874,
tid:2866
05-19 [Link].824 479 1594 I libPowerHal: [PD] scn:4 hdl:26874
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].902 918 2866 I mtkpower_client: perf_lock_rel, hdl:26873,
tid:2866
05-19 [Link].903 479 1594 I libPowerHal: [PD] scn:3 hdl:26873
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].973 918 2866 I mtkpower_client: perf_lock_rel, hdl:26872,
tid:2866
05-19 [Link].975 479 1594 I libPowerHal: [PD] scn:2 hdl:26872
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].424 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].426 918 2866 I mtkpower_client: ret_hdl:26876
05-19 [Link].426 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26876 hint:-1
pid:918 duration:0 => ret_hdl:26876
05-19 [Link].426 479 1594 I libPowerHal: [PE] scn:2 hdl:26876
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].528 918 2866 I mtkpower_client: perf_lock_rel, hdl:26876,
tid:2866
05-19 [Link].529 479 1594 I libPowerHal: [PD] scn:2 hdl:26876
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].593 918 15538 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].593 918 15538 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].599 918 1959 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].599 918 1959 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].600 918 1085 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].601 918 1085 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 32757 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].697 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].699 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26879 hint:-1
pid:918 duration:0 => ret_hdl:26879
05-19 [Link].699 918 2866 I mtkpower_client: ret_hdl:26879
05-19 [Link].699 479 1594 I libPowerHal: [PE] scn:2 hdl:26879
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].747 918 2950 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].747 918 2950 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].747 918 2950 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].748 918 2950 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].748 918 2950 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 32900
05-19 [Link].748 918 2950 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde8a4000
05-19 [Link].748 918 2950 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].766 918 2959 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2959
05-19 [Link].767 918 2959 I mtkpower_client: ret_hdl:26880
05-19 [Link].770 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26880 hint:-1
pid:918 duration:0 => ret_hdl:26880
05-19 [Link].770 479 1594 I libPowerHal: [PE] scn:3 hdl:26880
lock_user:[email protected] pid:918 tid:2959 dur:0
05-19 [Link].831 918 2950 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].831 918 2950 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].831 918 2950 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].831 918 2950 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].831 918 2950 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].062 918 2866 I mtkpower_client: perf_lock_rel, hdl:26879,
tid:2866
05-19 [Link].062 479 1594 I libPowerHal: [PD] scn:2 hdl:26879
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].014 918 2958 I mtkpower_client: perf_lock_rel, hdl:26880,
tid:2958
05-19 [Link].014 918 2958 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2958
05-19 [Link].015 479 1594 I libPowerHal: [PD] scn:3 hdl:26880
lock_user:[email protected] pid:918 tid:2959 dur:0
05-19 [Link].016 918 2958 I mtkpower_client: ret_hdl:26881
05-19 [Link].016 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26881 hint:-1
pid:918 duration:0 => ret_hdl:26881
05-19 [Link].016 479 1594 I libPowerHal: [PE] scn:2 hdl:26881
lock_user:[email protected] pid:918 tid:2958 dur:0
05-19 [Link].313 918 2866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:2866
05-19 [Link].315 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26884 hint:-1
pid:918 duration:0 => ret_hdl:26884
05-19 [Link].315 479 1594 I libPowerHal: [PE] scn:3 hdl:26884
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].315 918 2866 I mtkpower_client: ret_hdl:26884
05-19 [Link].397 918 2854 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].414 918 2854 I mtkpower_client: perf_lock_rel, hdl:26874,
tid:2854
05-19 [Link].414 918 2854 I mtkpower_client: perf_lock_rel, hdl:26873,
tid:2854
05-19 [Link].414 918 2854 I mtkpower_client: perf_lock_rel, hdl:26884,
tid:2854
05-19 [Link].414 918 2854 I mtkpower_client: perf_lock_rel, hdl:26871,
tid:2854
05-19 [Link].415 918 2854 I mtkpower_client: perf_lock_rel, hdl:26870,
tid:2854
05-19 [Link].420 479 1594 I libPowerHal: [PD] scn:3 hdl:26884
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].421 479 1594 I libPowerHal: [PD] scn:1 hdl:26871
lock_user:[email protected] pid:918 tid:2866 dur:0
05-19 [Link].776 918 5020 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].777 918 32757 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].780 918 15538 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].780 918 15538 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 32757 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].782 918 15538 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].783 918 15538 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].825 918 3056 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].825 918 3056 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].825 918 3056 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].825 918 3056 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].825 918 3056 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16734
05-19 [Link].826 918 3056 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2c42000
05-19 [Link].826 918 3056 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].839 918 3062 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3062
05-19 [Link].841 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26890 hint:-1
pid:918 duration:0 => ret_hdl:26890
05-19 [Link].841 479 1594 I libPowerHal: [PE] scn:1 hdl:26890
lock_user:[email protected] pid:918 tid:3062 dur:0
05-19 [Link].841 918 3062 I mtkpower_client: ret_hdl:26890
05-19 [Link].876 918 3056 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].876 918 3056 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].876 918 3056 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].876 918 3056 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].877 918 3056 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].981 918 2948 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].007 918 2948 I mtkpower_client: perf_lock_rel, hdl:26881,
tid:2948
05-19 [Link].009 479 1594 I libPowerHal: [PD] scn:2 hdl:26881
lock_user:[email protected] pid:918 tid:2958 dur:0
05-19 [Link].010 918 2948 I mtkpower_client: perf_lock_rel, hdl:26880,
tid:2948
05-19 [Link].203 918 3060 I mtkpower_client: perf_lock_rel, hdl:26890,
tid:3060
05-19 [Link].203 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].204 479 1594 I libPowerHal: [PD] scn:1 hdl:26890
lock_user:[email protected] pid:918 tid:3062 dur:0
05-19 [Link].205 918 3060 I mtkpower_client: ret_hdl:26891
05-19 [Link].205 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].205 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26891 hint:-1
pid:918 duration:0 => ret_hdl:26891
05-19 [Link].205 479 1594 I libPowerHal: [PE] scn:1 hdl:26891
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].206 918 3060 I mtkpower_client: ret_hdl:26892
05-19 [Link].206 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].208 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26892 hint:-1
pid:918 duration:0 => ret_hdl:26892
05-19 [Link].208 479 1594 I libPowerHal: [PE] scn:2 hdl:26892
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].209 918 3060 I mtkpower_client: ret_hdl:26893
05-19 [Link].209 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26893 hint:-1
pid:918 duration:0 => ret_hdl:26893
05-19 [Link].209 479 1594 I libPowerHal: [PE] scn:3 hdl:26893
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].515 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].516 918 3060 I mtkpower_client: ret_hdl:26894
05-19 [Link].516 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].517 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26894 hint:-1
pid:918 duration:0 => ret_hdl:26894
05-19 [Link].517 479 1594 I libPowerHal: [PE] scn:4 hdl:26894
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].518 918 3060 I mtkpower_client: ret_hdl:26895
05-19 [Link].519 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26895 hint:-1
pid:918 duration:0 => ret_hdl:26895
05-19 [Link].519 479 1594 I libPowerHal: [PE] scn:5 hdl:26895
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].631 918 3060 I mtkpower_client: perf_lock_rel, hdl:26895,
tid:3060
05-19 [Link].632 479 1594 I libPowerHal: [PD] scn:5 hdl:26895
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].709 918 3060 I mtkpower_client: perf_lock_rel, hdl:26894,
tid:3060
05-19 [Link].710 918 3060 I mtkpower_client: perf_lock_rel, hdl:26893,
tid:3060
05-19 [Link].716 479 1594 I libPowerHal: [PD] scn:4 hdl:26894
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].719 479 1594 I libPowerHal: [PD] scn:3 hdl:26893
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].817 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].819 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26899 hint:-1
pid:918 duration:0 => ret_hdl:26899
05-19 [Link].819 479 1594 I libPowerHal: [PE] scn:4 hdl:26899
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].822 918 3060 I mtkpower_client: ret_hdl:26899
05-19 [Link].914 918 15538 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].914 918 15538 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].918 918 32757 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].918 918 32757 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].919 918 1959 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].920 918 918 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].922 918 918 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].004 918 3105 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].004 918 3105 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].004 918 3105 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].004 918 3105 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].004 918 3105 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 15209
05-19 [Link].005 918 3105 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfbb9000
05-19 [Link].005 918 3105 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].012 918 3112 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3112
05-19 [Link].014 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26902 hint:-1
pid:918 duration:0 => ret_hdl:26902
05-19 [Link].014 479 1594 I libPowerHal: [PE] scn:0 hdl:26902
lock_user:[email protected] pid:918 tid:3112 dur:0
05-19 [Link].015 918 3112 I mtkpower_client: ret_hdl:26902
05-19 [Link].020 918 3060 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3060
05-19 [Link].021 918 3060 I mtkpower_client: ret_hdl:26903
05-19 [Link].022 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26903 hint:-1
pid:918 duration:0 => ret_hdl:26903
05-19 [Link].022 479 1594 I libPowerHal: [PE] scn:3 hdl:26903
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].024 918 3105 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].024 918 3105 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].024 918 3105 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].024 918 3105 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].024 918 3105 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].125 918 3055 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].158 918 3055 I mtkpower_client: perf_lock_rel, hdl:26895,
tid:3055
05-19 [Link].158 918 3055 I mtkpower_client: perf_lock_rel, hdl:26903,
tid:3055
05-19 [Link].159 918 3055 I mtkpower_client: perf_lock_rel, hdl:26899,
tid:3055
05-19 [Link].159 918 3055 I mtkpower_client: perf_lock_rel, hdl:26892,
tid:3055
05-19 [Link].159 918 3055 I mtkpower_client: perf_lock_rel, hdl:26891,
tid:3055
05-19 [Link].159 918 3055 I mtkpower_client: perf_lock_rel, hdl:26890,
tid:3055
05-19 [Link].160 479 1594 I libPowerHal: [PD] scn:3 hdl:26903
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].171 479 1594 I libPowerHal: [PD] scn:4 hdl:26899
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].172 479 1594 I libPowerHal: [PD] scn:2 hdl:26892
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].173 479 1594 I libPowerHal: [PD] scn:1 hdl:26891
lock_user:[email protected] pid:918 tid:3060 dur:0
05-19 [Link].333 918 3111 I mtkpower_client: perf_lock_rel, hdl:26902,
tid:3111
05-19 [Link].333 918 3111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3111
05-19 [Link].334 479 1594 I libPowerHal: [PD] scn:0 hdl:26902
lock_user:[email protected] pid:918 tid:3112 dur:0
05-19 [Link].334 918 3111 I mtkpower_client: ret_hdl:26905
05-19 [Link].335 918 3111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3111
05-19 [Link].335 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26905 hint:-1
pid:918 duration:0 => ret_hdl:26905
05-19 [Link].335 479 1594 I libPowerHal: [PE] scn:2 hdl:26905
lock_user:[email protected] pid:918 tid:3111 dur:0
05-19 [Link].337 918 3111 I mtkpower_client: ret_hdl:26906
05-19 [Link].337 918 3111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3111
05-19 [Link].337 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26906 hint:-1
pid:918 duration:0 => ret_hdl:26906
05-19 [Link].337 479 1594 I libPowerHal: [PE] scn:0 hdl:26906
lock_user:[email protected] pid:918 tid:3111 dur:0
05-19 [Link].340 918 3111 I mtkpower_client: ret_hdl:26907
05-19 [Link].340 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26907 hint:-1
pid:918 duration:0 => ret_hdl:26907
05-19 [Link].340 479 1594 I libPowerHal: [PE] scn:3 hdl:26907
lock_user:[email protected] pid:918 tid:3111 dur:0
05-19 [Link].572 918 32757 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].572 918 32757 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].577 918 918 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].577 918 918 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].578 918 1085 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].579 918 1085 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].580 918 918 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].625 918 3179 E VDO_LOG : GetDecoderAPI hWrapper 0xea2bf810
05-19 [Link].625 918 3179 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].625 918 3179 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].626 918 3179 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].626 918 3179 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21719
05-19 [Link].626 918 3179 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe29d8000
05-19 [Link].626 918 3179 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].630 918 3184 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3184
05-19 [Link].631 918 3184 I mtkpower_client: ret_hdl:26912
05-19 [Link].633 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26912 hint:-1
pid:918 duration:0 => ret_hdl:26912
05-19 [Link].633 479 1594 I libPowerHal: [PE] scn:4 hdl:26912
lock_user:[email protected] pid:918 tid:3184 dur:0
05-19 [Link].639 918 3179 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].639 918 3179 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].639 918 3179 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].639 918 3179 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].639 918 3179 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].870 918 3104 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].885 918 3104 I mtkpower_client: perf_lock_rel, hdl:26907,
tid:3104
05-19 [Link].885 918 3104 I mtkpower_client: perf_lock_rel, hdl:26906,
tid:3104
05-19 [Link].886 918 3104 I mtkpower_client: perf_lock_rel, hdl:26905,
tid:3104
05-19 [Link].886 918 3104 I mtkpower_client: perf_lock_rel, hdl:26902,
tid:3104
05-19 [Link].887 479 1594 I libPowerHal: [PD] scn:3 hdl:26907
lock_user:[email protected] pid:918 tid:3111 dur:0
05-19 [Link].897 479 1594 I libPowerHal: [PD] scn:0 hdl:26906
lock_user:[email protected] pid:918 tid:3111 dur:0
05-19 [Link].897 479 1594 I libPowerHal: [PD] scn:2 hdl:26905
lock_user:[email protected] pid:918 tid:3111 dur:0
05-19 [Link].091 918 3183 I mtkpower_client: perf_lock_rel, hdl:26912,
tid:3183
05-19 [Link].091 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].092 479 1594 I libPowerHal: [PD] scn:4 hdl:26912
lock_user:[email protected] pid:918 tid:3184 dur:0
05-19 [Link].095 918 3183 I mtkpower_client: ret_hdl:26916
05-19 [Link].095 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].097 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26916 hint:-1
pid:918 duration:0 => ret_hdl:26916
05-19 [Link].097 479 1594 I libPowerHal: [PE] scn:3 hdl:26916
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].098 918 3183 I mtkpower_client: ret_hdl:26917
05-19 [Link].098 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].099 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26917 hint:-1
pid:918 duration:0 => ret_hdl:26917
05-19 [Link].099 479 1594 I libPowerHal: [PE] scn:4 hdl:26917
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].100 918 3183 I mtkpower_client: ret_hdl:26918
05-19 [Link].100 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].101 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26918 hint:-1
pid:918 duration:0 => ret_hdl:26918
05-19 [Link].101 479 1594 I libPowerHal: [PE] scn:5 hdl:26918
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].103 918 3183 I mtkpower_client: ret_hdl:26919
05-19 [Link].103 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].104 918 3183 I mtkpower_client: ret_hdl:26920
05-19 [Link].105 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26919 hint:-1
pid:918 duration:0 => ret_hdl:26919
05-19 [Link].105 479 1594 I libPowerHal: [PE] scn:6 hdl:26919
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].106 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26920 hint:-1
pid:918 duration:0 => ret_hdl:26920
05-19 [Link].106 479 1594 I libPowerHal: [PE] scn:7 hdl:26920
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].170 918 32757 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].170 918 32757 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].171 918 1085 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].171 918 1085 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].172 918 1085 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].172 918 1085 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].172 918 1085 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].215 918 3261 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].215 918 3261 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].215 918 3261 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].216 918 3261 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].216 918 3261 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 44722
05-19 [Link].216 918 3261 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfcf1000
05-19 [Link].216 918 3261 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].220 918 3266 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3266
05-19 [Link].222 918 3266 I mtkpower_client: ret_hdl:26923
05-19 [Link].223 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26923 hint:-1
pid:918 duration:0 => ret_hdl:26923
05-19 [Link].223 479 1594 I libPowerHal: [PE] scn:0 hdl:26923
lock_user:[email protected] pid:918 tid:3266 dur:0
05-19 [Link].232 918 3261 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].232 918 3261 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].232 918 3261 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].232 918 3261 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].232 918 3261 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].263 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].264 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26924 hint:-1
pid:918 duration:0 => ret_hdl:26924
05-19 [Link].265 479 1594 I libPowerHal: [PE] scn:1 hdl:26924
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].265 918 3183 I mtkpower_client: ret_hdl:26924
05-19 [Link].265 918 3183 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3183
05-19 [Link].266 918 3183 I mtkpower_client: ret_hdl:26925
05-19 [Link].266 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26925 hint:-1
pid:918 duration:0 => ret_hdl:26925
05-19 [Link].266 479 1594 I libPowerHal: [PE] scn:2 hdl:26925
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].402 918 3178 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].426 918 3178 I mtkpower_client: perf_lock_rel, hdl:26925,
tid:3178
05-19 [Link].427 918 3178 I mtkpower_client: perf_lock_rel, hdl:26924,
tid:3178
05-19 [Link].427 918 3178 I mtkpower_client: perf_lock_rel, hdl:26920,
tid:3178
05-19 [Link].427 918 3178 I mtkpower_client: perf_lock_rel, hdl:26919,
tid:3178
05-19 [Link].427 479 1594 I libPowerHal: [PD] scn:2 hdl:26925
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].427 918 3178 I mtkpower_client: perf_lock_rel, hdl:26918,
tid:3178
05-19 [Link].427 918 3178 I mtkpower_client: perf_lock_rel, hdl:26917,
tid:3178
05-19 [Link].428 918 3178 I mtkpower_client: perf_lock_rel, hdl:26916,
tid:3178
05-19 [Link].428 918 3178 I mtkpower_client: perf_lock_rel, hdl:26912,
tid:3178
05-19 [Link].428 479 1594 I libPowerHal: [PD] scn:1 hdl:26924
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].429 479 1594 I libPowerHal: [PD] scn:7 hdl:26920
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].430 479 1594 I libPowerHal: [PD] scn:6 hdl:26919
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].431 479 1594 I libPowerHal: [perfLockRel] hdl:26918, idx:5
05-19 [Link].432 479 1594 I libPowerHal: [PD] scn:5 hdl:26918
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].433 479 1594 I libPowerHal: [PD] scn:4 hdl:26917
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].435 479 1594 I libPowerHal: [PD] scn:3 hdl:26916
lock_user:[email protected] pid:918 tid:3183 dur:0
05-19 [Link].579 918 3265 I mtkpower_client: perf_lock_rel, hdl:26923,
tid:3265
05-19 [Link].579 918 3265 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3265
05-19 [Link].579 479 1594 I libPowerHal: [PD] scn:0 hdl:26923
lock_user:[email protected] pid:918 tid:3266 dur:0
05-19 [Link].580 918 3265 I mtkpower_client: ret_hdl:26927
05-19 [Link].581 918 3265 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3265
05-19 [Link].581 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26927 hint:-1
pid:918 duration:0 => ret_hdl:26927
05-19 [Link].581 479 1594 I libPowerHal: [PE] scn:0 hdl:26927
lock_user:[email protected] pid:918 tid:3265 dur:0
05-19 [Link].582 918 3265 I mtkpower_client: ret_hdl:26928
05-19 [Link].582 918 3265 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3265
05-19 [Link].582 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26928 hint:-1
pid:918 duration:0 => ret_hdl:26928
05-19 [Link].582 479 1594 I libPowerHal: [PE] scn:2 hdl:26928
lock_user:[email protected] pid:918 tid:3265 dur:0
05-19 [Link].583 918 3265 I mtkpower_client: ret_hdl:26929
05-19 [Link].584 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26929 hint:-1
pid:918 duration:0 => ret_hdl:26929
05-19 [Link].584 479 1594 I libPowerHal: [PE] scn:3 hdl:26929
lock_user:[email protected] pid:918 tid:3265 dur:0
05-19 [Link].722 918 918 E OMXNodeInstance:
setParameter(0xea486004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].723 918 1065 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].726 918 15538 E MtkOmxVdecEx: [0xea486000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].726 918 15538 E OMXNodeInstance:
setConfig(0xea486004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].726 918 15538 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].726 918 32757 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].728 918 32757 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].805 918 3265 I mtkpower_client: perf_lock_rel, hdl:26929,
tid:3265
05-19 [Link].806 479 1594 I libPowerHal: [PD] scn:3 hdl:26929
lock_user:[email protected] pid:918 tid:3265 dur:0
05-19 [Link].838 918 3333 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].838 918 3333 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].838 918 3333 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].838 918 3333 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].838 918 3333 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8203
05-19 [Link].838 918 3333 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2cd9000
05-19 [Link].839 918 3333 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].845 918 3340 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3340
05-19 [Link].846 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26934 hint:-1
pid:918 duration:0 => ret_hdl:26934
05-19 [Link].846 479 1594 I libPowerHal: [PE] scn:3 hdl:26934
lock_user:[email protected] pid:918 tid:3340 dur:0
05-19 [Link].846 918 3340 I mtkpower_client: ret_hdl:26934
05-19 [Link].851 918 3333 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].851 918 3333 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].851 918 3333 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].851 918 3333 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].851 918 3333 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].968 918 3260 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].982 918 3260 I mtkpower_client: perf_lock_rel, hdl:26929,
tid:3260
05-19 [Link].982 918 3260 I mtkpower_client: perf_lock_rel, hdl:26928,
tid:3260
05-19 [Link].982 918 3260 I mtkpower_client: perf_lock_rel, hdl:26927,
tid:3260
05-19 [Link].982 918 3260 I mtkpower_client: perf_lock_rel, hdl:26923,
tid:3260
05-19 [Link].986 479 1594 I libPowerHal: [PD] scn:2 hdl:26928
lock_user:[email protected] pid:918 tid:3265 dur:0
05-19 [Link].987 479 1594 I libPowerHal: [PD] scn:0 hdl:26927
lock_user:[email protected] pid:918 tid:3265 dur:0
05-19 [Link].114 918 3339 I mtkpower_client: perf_lock_rel, hdl:26934,
tid:3339
05-19 [Link].114 918 3339 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3339
05-19 [Link].115 479 1594 I libPowerHal: [PD] scn:3 hdl:26934
lock_user:[email protected] pid:918 tid:3340 dur:0
05-19 [Link].116 918 3339 I mtkpower_client: ret_hdl:26935
05-19 [Link].116 918 3339 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3339
05-19 [Link].117 918 3339 I mtkpower_client: ret_hdl:26936
05-19 [Link].117 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26935 hint:-1
pid:918 duration:0 => ret_hdl:26935
05-19 [Link].117 479 1594 I libPowerHal: [PE] scn:0 hdl:26935
lock_user:[email protected] pid:918 tid:3339 dur:0
05-19 [Link].121 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26936 hint:-1
pid:918 duration:0 => ret_hdl:26936
05-19 [Link].121 479 1594 I libPowerHal: [PE] scn:2 hdl:26936
lock_user:[email protected] pid:918 tid:3339 dur:0
05-19 [Link].235 918 3339 I mtkpower_client: perf_lock_rel, hdl:26936,
tid:3339
05-19 [Link].236 479 1594 I libPowerHal: [PD] scn:2 hdl:26936
lock_user:[email protected] pid:918 tid:3339 dur:0
05-19 [Link].828 918 1065 E OMXNodeInstance:
setParameter(0xea4f2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].828 918 1065 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].832 918 1960 E MtkOmxVdecEx: [0xea4f2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].832 918 1960 E OMXNodeInstance:
setConfig(0xea4f2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].832 918 11990 E OMXNodeInstance:
getParameter(0xea4f2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].833 918 15538 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].834 918 1065 E OMXNodeInstance:
getConfig(0xea4f2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].874 918 3385 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].874 918 3385 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].874 918 3385 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].874 918 3385 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].874 918 3385 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 44722
05-19 [Link].874 918 3385 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfe58000
05-19 [Link].875 918 3385 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].877 918 3394 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3394
05-19 [Link].877 918 3394 I mtkpower_client: ret_hdl:26942
05-19 [Link].878 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26942 hint:-1
pid:918 duration:0 => ret_hdl:26942
05-19 [Link].878 479 1594 I libPowerHal: [PE] scn:1 hdl:26942
lock_user:[email protected] pid:918 tid:3394 dur:0
05-19 [Link].889 918 3385 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].889 918 3385 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].889 918 3385 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].889 918 3385 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].889 918 3385 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].082 918 3332 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].114 918 3332 I mtkpower_client: perf_lock_rel, hdl:26936,
tid:3332
05-19 [Link].114 918 3332 I mtkpower_client: perf_lock_rel, hdl:26935,
tid:3332
05-19 [Link].114 918 3332 I mtkpower_client: perf_lock_rel, hdl:26934,
tid:3332
05-19 [Link].119 479 1594 I libPowerHal: [PD] scn:0 hdl:26935
lock_user:[email protected] pid:918 tid:3339 dur:0
05-19 [Link].210 918 3392 I mtkpower_client: perf_lock_rel, hdl:26942,
tid:3392
05-19 [Link].210 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].210 479 1594 I libPowerHal: [PD] scn:1 hdl:26942
lock_user:[email protected] pid:918 tid:3394 dur:0
05-19 [Link].211 918 3392 I mtkpower_client: ret_hdl:26943
05-19 [Link].211 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].211 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26943 hint:-1
pid:918 duration:0 => ret_hdl:26943
05-19 [Link].211 479 1594 I libPowerHal: [PE] scn:0 hdl:26943
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].212 918 3392 I mtkpower_client: ret_hdl:26944
05-19 [Link].212 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26944 hint:-1
pid:918 duration:0 => ret_hdl:26944
05-19 [Link].212 479 1594 I libPowerHal: [PE] scn:1 hdl:26944
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].381 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].382 918 3392 I mtkpower_client: ret_hdl:26945
05-19 [Link].382 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26945 hint:-1
pid:918 duration:0 => ret_hdl:26945
05-19 [Link].382 479 1594 I libPowerHal: [PE] scn:3 hdl:26945
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].468 918 3392 I mtkpower_client: perf_lock_rel, hdl:26945,
tid:3392
05-19 [Link].470 479 1594 I libPowerHal: [PD] scn:3 hdl:26945
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].802 918 3392 I mtkpower_client: perf_lock_rel, hdl:26944,
tid:3392
05-19 [Link].803 479 1594 I libPowerHal: [PD] scn:1 hdl:26944
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].258 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].259 918 3392 I mtkpower_client: ret_hdl:26946
05-19 [Link].259 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26946 hint:-1
pid:918 duration:0 => ret_hdl:26946
05-19 [Link].259 479 1594 I libPowerHal: [PE] scn:1 hdl:26946
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].358 918 3392 I mtkpower_client: perf_lock_rel, hdl:26946,
tid:3392
05-19 [Link].359 479 1594 I libPowerHal: [PD] scn:1 hdl:26946
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].960 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].962 918 3392 I mtkpower_client: ret_hdl:26947
05-19 [Link].962 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26947 hint:-1
pid:918 duration:0 => ret_hdl:26947
05-19 [Link].962 479 1594 I libPowerHal: [PE] scn:1 hdl:26947
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].438 918 3392 I mtkpower_client: perf_lock_rel, hdl:26947,
tid:3392
05-19 [Link].439 479 1594 I libPowerHal: [PD] scn:1 hdl:26947
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].138 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].140 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26948 hint:-1
pid:918 duration:0 => ret_hdl:26948
05-19 [Link].140 479 1594 I libPowerHal: [PE] scn:1 hdl:26948
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].141 918 3392 I mtkpower_client: ret_hdl:26948
05-19 [Link].421 918 3392 I mtkpower_client: perf_lock_rel, hdl:26948,
tid:3392
05-19 [Link].423 479 1594 I libPowerHal: [PD] scn:1 hdl:26948
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].582 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].584 918 3392 I mtkpower_client: ret_hdl:26949
05-19 [Link].585 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].585 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26949 hint:-1
pid:918 duration:0 => ret_hdl:26949
05-19 [Link].585 479 1594 I libPowerHal: [PE] scn:1 hdl:26949
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].586 918 3392 I mtkpower_client: ret_hdl:26950
05-19 [Link].587 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26950 hint:-1
pid:918 duration:0 => ret_hdl:26950
05-19 [Link].587 479 1594 I libPowerHal: [PE] scn:2 hdl:26950
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].650 918 3392 I mtkpower_client: perf_lock_rel, hdl:26950,
tid:3392
05-19 [Link].652 479 1594 I libPowerHal: [PD] scn:2 hdl:26950
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].719 918 3392 I mtkpower_client: perf_lock_rel, hdl:26949,
tid:3392
05-19 [Link].720 479 1594 I libPowerHal: [PD] scn:1 hdl:26949
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].721 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].723 918 3392 I mtkpower_client: ret_hdl:26956
05-19 [Link].723 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].723 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26956 hint:-1
pid:918 duration:0 => ret_hdl:26956
05-19 [Link].723 479 1594 I libPowerHal: [PE] scn:1 hdl:26956
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].725 918 3392 I mtkpower_client: ret_hdl:26957
05-19 [Link].726 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26957 hint:-1
pid:918 duration:0 => ret_hdl:26957
05-19 [Link].726 479 1594 I libPowerHal: [PE] scn:2 hdl:26957
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].957 918 3392 I mtkpower_client: perf_lock_rel, hdl:26957,
tid:3392
05-19 [Link].958 479 1594 I libPowerHal: [PD] scn:2 hdl:26957
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].014 918 3392 I mtkpower_client: perf_lock_rel, hdl:26956,
tid:3392
05-19 [Link].015 479 1594 I libPowerHal: [PD] scn:1 hdl:26956
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].737 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].738 918 3392 I mtkpower_client: ret_hdl:26958
05-19 [Link].739 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].739 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26958 hint:-1
pid:918 duration:0 => ret_hdl:26958
05-19 [Link].739 479 1594 I libPowerHal: [PE] scn:1 hdl:26958
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].740 918 3392 I mtkpower_client: ret_hdl:26959
05-19 [Link].740 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].741 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26959 hint:-1
pid:918 duration:0 => ret_hdl:26959
05-19 [Link].741 479 1594 I libPowerHal: [PE] scn:2 hdl:26959
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].741 918 3392 I mtkpower_client: ret_hdl:26960
05-19 [Link].741 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].742 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:26960 hint:-1
pid:918 duration:0 => ret_hdl:26960
05-19 [Link].742 479 1594 I libPowerHal: [PE] scn:3 hdl:26960
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].742 918 3392 I mtkpower_client: ret_hdl:26961
05-19 [Link].742 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].743 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26961 hint:-1
pid:918 duration:0 => ret_hdl:26961
05-19 [Link].743 479 1594 I libPowerHal: [PE] scn:4 hdl:26961
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].743 918 3392 I mtkpower_client: ret_hdl:26962
05-19 [Link].743 918 3392 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3392
05-19 [Link].743 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26962 hint:-1
pid:918 duration:0 => ret_hdl:26962
05-19 [Link].744 479 1594 I libPowerHal: [PE] scn:5 hdl:26962
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].744 918 3392 I mtkpower_client: ret_hdl:26963
05-19 [Link].744 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26963 hint:-1
pid:918 duration:0 => ret_hdl:26963
05-19 [Link].745 479 1594 I libPowerHal: [PE] scn:6 hdl:26963
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].047 918 3392 I mtkpower_client: perf_lock_rel, hdl:26963,
tid:3392
05-19 [Link].047 918 3392 I mtkpower_client: perf_lock_rel, hdl:26962,
tid:3392
05-19 [Link].048 479 1594 I libPowerHal: [PD] scn:6 hdl:26963
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].051 479 1594 I libPowerHal: [PD] scn:5 hdl:26962
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].475 918 11990 E OMXNodeInstance:
setParameter(0xea486004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].475 918 11990 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].477 918 11990 E MtkOmxVdecEx: [0xea486000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].477 918 11990 E OMXNodeInstance:
setConfig(0xea486004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].478 918 11990 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].478 918 11990 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].478 918 11990 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].513 918 3455 E VDO_LOG : GetDecoderAPI hWrapper 0xea16a810
05-19 [Link].513 918 3455 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].513 918 3455 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].514 918 3455 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].515 918 3455 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8203
05-19 [Link].515 918 3455 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2b85000
05-19 [Link].515 918 3455 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].519 918 3461 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3461
05-19 [Link].521 918 3461 I mtkpower_client: ret_hdl:26969
05-19 [Link].522 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26969 hint:-1
pid:918 duration:0 => ret_hdl:26969
05-19 [Link].522 479 1594 I libPowerHal: [PE] scn:6 hdl:26969
lock_user:[email protected] pid:918 tid:3461 dur:0
05-19 [Link].527 918 3455 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].527 918 3455 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].527 918 3455 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].527 918 3455 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].527 918 3455 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].690 918 3383 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].718 918 3460 I mtkpower_client: perf_lock_rel, hdl:26969,
tid:3460
05-19 [Link].718 918 3460 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3460
05-19 [Link].724 479 1594 I libPowerHal: [PD] scn:6 hdl:26969
lock_user:[email protected] pid:918 tid:3461 dur:0
05-19 [Link].725 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:26970 hint:-1
pid:918 duration:0 => ret_hdl:26970
05-19 [Link].725 479 1594 I libPowerHal: [PE] scn:7 hdl:26970
lock_user:[email protected] pid:918 tid:3460 dur:0
05-19 [Link].726 918 3460 I mtkpower_client: ret_hdl:26970
05-19 [Link].726 918 3383 I mtkpower_client: perf_lock_rel, hdl:26963,
tid:3383
05-19 [Link].726 918 3383 I mtkpower_client: perf_lock_rel, hdl:26962,
tid:3383
05-19 [Link].726 918 3383 I mtkpower_client: perf_lock_rel, hdl:26961,
tid:3383
05-19 [Link].726 918 3383 I mtkpower_client: perf_lock_rel, hdl:26960,
tid:3383
05-19 [Link].726 918 3383 I mtkpower_client: perf_lock_rel, hdl:26959,
tid:3383
05-19 [Link].727 918 3383 I mtkpower_client: perf_lock_rel, hdl:26958,
tid:3383
05-19 [Link].727 918 3383 I mtkpower_client: perf_lock_rel, hdl:26943,
tid:3383
05-19 [Link].727 918 3383 I mtkpower_client: perf_lock_rel, hdl:26942,
tid:3383
05-19 [Link].729 479 1594 I libPowerHal: [PD] scn:4 hdl:26961
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].733 479 1594 I libPowerHal: [PD] scn:3 hdl:26960
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].735 479 1594 I libPowerHal: [PD] scn:2 hdl:26959
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].736 479 1594 I libPowerHal: [PD] scn:1 hdl:26958
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].739 479 1594 I libPowerHal: [PD] scn:0 hdl:26943
lock_user:[email protected] pid:918 tid:3392 dur:0
05-19 [Link].030 918 1065 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].030 918 1065 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].034 918 1065 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].034 918 1065 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].034 918 1065 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].035 918 1065 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].036 918 1065 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].094 918 3502 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb4810
05-19 [Link].094 918 3502 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].094 918 3502 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].095 918 3502 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].095 918 3502 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 44722
05-19 [Link].095 918 3502 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2df7000
05-19 [Link].095 918 3502 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].116 918 3510 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3510
05-19 [Link].117 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26976 hint:-1
pid:918 duration:0 => ret_hdl:26976
05-19 [Link].117 479 1594 I libPowerHal: [PE] scn:0 hdl:26976
lock_user:[email protected] pid:918 tid:3510 dur:0
05-19 [Link].117 918 3510 I mtkpower_client: ret_hdl:26976
05-19 [Link].153 918 3502 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].153 918 3502 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].153 918 3502 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].153 918 3502 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].153 918 3502 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].210 918 3453 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].273 918 3453 I mtkpower_client: perf_lock_rel, hdl:26970,
tid:3453
05-19 [Link].273 918 3453 I mtkpower_client: perf_lock_rel, hdl:26969,
tid:3453
05-19 [Link].274 479 1594 I libPowerHal: [PD] scn:7 hdl:26970
lock_user:[email protected] pid:918 tid:3460 dur:0
05-19 [Link].479 918 3508 I mtkpower_client: perf_lock_rel, hdl:26976,
tid:3508
05-19 [Link].479 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].480 479 1594 I libPowerHal: [PD] scn:0 hdl:26976
lock_user:[email protected] pid:918 tid:3510 dur:0
05-19 [Link].482 918 3508 I mtkpower_client: ret_hdl:26977
05-19 [Link].482 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].482 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:26977 hint:-1
pid:918 duration:0 => ret_hdl:26977
05-19 [Link].482 479 1594 I libPowerHal: [PE] scn:0 hdl:26977
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].485 918 3508 I mtkpower_client: ret_hdl:26978
05-19 [Link].485 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].485 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26978 hint:-1
pid:918 duration:0 => ret_hdl:26978
05-19 [Link].485 479 1594 I libPowerHal: [PE] scn:1 hdl:26978
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].486 918 3508 I mtkpower_client: ret_hdl:26979
05-19 [Link].486 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].486 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26979 hint:-1
pid:918 duration:0 => ret_hdl:26979
05-19 [Link].487 479 1594 I libPowerHal: [PE] scn:2 hdl:26979
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].487 918 3508 I mtkpower_client: ret_hdl:26980
05-19 [Link].487 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].488 918 3508 I mtkpower_client: ret_hdl:26981
05-19 [Link].488 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].489 918 3508 I mtkpower_client: ret_hdl:26982
05-19 [Link].489 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:26980 hint:-1
pid:918 duration:0 => ret_hdl:26980
05-19 [Link].489 479 1594 I libPowerHal: [PE] scn:4 hdl:26980
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].490 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:26981 hint:-1
pid:918 duration:0 => ret_hdl:26981
05-19 [Link].490 479 1594 I libPowerHal: [PE] scn:5 hdl:26981
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].490 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:26982 hint:-1
pid:918 duration:0 => ret_hdl:26982
05-19 [Link].490 479 1594 I libPowerHal: [PE] scn:6 hdl:26982
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].585 918 3508 I mtkpower_client: perf_lock_rel, hdl:26982,
tid:3508
05-19 [Link].585 918 3508 I mtkpower_client: perf_lock_rel, hdl:26981,
tid:3508
05-19 [Link].586 479 1594 I libPowerHal: [PD] scn:6 hdl:26982
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].587 479 1594 I libPowerHal: [PD] scn:5 hdl:26981
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].644 918 3508 I mtkpower_client: perf_lock_rel, hdl:26980,
tid:3508
05-19 [Link].644 479 1594 I libPowerHal: [PD] scn:4 hdl:26980
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].691 918 3508 I mtkpower_client: perf_lock_rel, hdl:26979,
tid:3508
05-19 [Link].691 479 1594 I libPowerHal: [PD] scn:2 hdl:26979
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].757 918 3508 I mtkpower_client: perf_lock_rel, hdl:26978,
tid:3508
05-19 [Link].758 479 1594 I libPowerHal: [PD] scn:1 hdl:26978
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].694 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].696 918 3508 I mtkpower_client: ret_hdl:26983
05-19 [Link].696 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26983 hint:-1
pid:918 duration:0 => ret_hdl:26983
05-19 [Link].696 479 1594 I libPowerHal: [PE] scn:1 hdl:26983
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].784 918 3508 I mtkpower_client: perf_lock_rel, hdl:26983,
tid:3508
05-19 [Link].786 479 1594 I libPowerHal: [PD] scn:1 hdl:26983
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].141 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].142 918 3508 I mtkpower_client: ret_hdl:26984
05-19 [Link].142 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26984 hint:-1
pid:918 duration:0 => ret_hdl:26984
05-19 [Link].142 479 1594 I libPowerHal: [PE] scn:1 hdl:26984
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].268 918 3508 I mtkpower_client: perf_lock_rel, hdl:26984,
tid:3508
05-19 [Link].269 479 1594 I libPowerHal: [PD] scn:1 hdl:26984
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].955 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].956 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26985 hint:-1
pid:918 duration:0 => ret_hdl:26985
05-19 [Link].956 479 1594 I libPowerHal: [PE] scn:1 hdl:26985
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].958 918 3508 I mtkpower_client: ret_hdl:26985
05-19 [Link].057 918 3508 I mtkpower_client: perf_lock_rel, hdl:26985,
tid:3508
05-19 [Link].058 479 1594 I libPowerHal: [PD] scn:1 hdl:26985
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].751 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].752 918 3508 I mtkpower_client: ret_hdl:26986
05-19 [Link].752 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26986 hint:-1
pid:918 duration:0 => ret_hdl:26986
05-19 [Link].752 479 1594 I libPowerHal: [PE] scn:1 hdl:26986
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].120 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].122 918 3508 I mtkpower_client: ret_hdl:26987
05-19 [Link].122 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26987 hint:-1
pid:918 duration:0 => ret_hdl:26987
05-19 [Link].122 479 1594 I libPowerHal: [PE] scn:2 hdl:26987
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].319 918 3508 I mtkpower_client: perf_lock_rel, hdl:26987,
tid:3508
05-19 [Link].320 479 1594 I libPowerHal: [PD] scn:2 hdl:26987
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].167 918 3508 I mtkpower_client: perf_lock_rel, hdl:26986,
tid:3508
05-19 [Link].169 479 1594 I libPowerHal: [PD] scn:1 hdl:26986
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].187 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].188 918 3508 I mtkpower_client: ret_hdl:26988
05-19 [Link].190 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26988 hint:-1
pid:918 duration:0 => ret_hdl:26988
05-19 [Link].190 479 1594 I libPowerHal: [PE] scn:1 hdl:26988
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].414 918 3508 I mtkpower_client: perf_lock_rel, hdl:26988,
tid:3508
05-19 [Link].415 479 1594 I libPowerHal: [PD] scn:1 hdl:26988
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].166 918 3508 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3508
05-19 [Link].167 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26989 hint:-1
pid:918 duration:0 => ret_hdl:26989
05-19 [Link].168 479 1594 I libPowerHal: [PE] scn:1 hdl:26989
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].169 918 3508 I mtkpower_client: ret_hdl:26989
05-19 [Link].407 918 3508 I mtkpower_client: perf_lock_rel, hdl:26989,
tid:3508
05-19 [Link].410 479 1594 I libPowerHal: [PD] scn:1 hdl:26989
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].336 918 32757 E OMXNodeInstance:
setParameter(0xe9930804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].336 918 32757 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].341 918 1960 E MtkOmxVdecEx: [0xe9930800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].341 918 1960 E OMXNodeInstance:
setConfig(0xe9930804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].341 918 15680 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].342 918 1959 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].342 918 1960 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].399 918 3561 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].400 918 3561 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].400 918 3561 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].402 918 3561 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].402 918 3561 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 8203
05-19 [Link].402 918 3561 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1d5e000
05-19 [Link].402 918 3561 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].406 918 3566 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3566
05-19 [Link].409 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26995 hint:-1
pid:918 duration:0 => ret_hdl:26995
05-19 [Link].409 479 1594 I libPowerHal: [PE] scn:2 hdl:26995
lock_user:[email protected] pid:918 tid:3566 dur:0
05-19 [Link].411 918 3566 I mtkpower_client: ret_hdl:26995
05-19 [Link].451 918 3561 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].451 918 3561 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].451 918 3561 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].451 918 3561 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].451 918 3561 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].626 918 3501 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].656 918 3501 I mtkpower_client: perf_lock_rel, hdl:26982,
tid:3501
05-19 [Link].657 918 3501 I mtkpower_client: perf_lock_rel, hdl:26981,
tid:3501
05-19 [Link].657 918 3501 I mtkpower_client: perf_lock_rel, hdl:26980,
tid:3501
05-19 [Link].657 918 3501 I mtkpower_client: perf_lock_rel, hdl:26987,
tid:3501
05-19 [Link].657 918 3501 I mtkpower_client: perf_lock_rel, hdl:26989,
tid:3501
05-19 [Link].657 918 3501 I mtkpower_client: perf_lock_rel, hdl:26977,
tid:3501
05-19 [Link].657 918 3501 I mtkpower_client: perf_lock_rel, hdl:26976,
tid:3501
05-19 [Link].662 479 1594 I libPowerHal: [PD] scn:0 hdl:26977
lock_user:[email protected] pid:918 tid:3508 dur:0
05-19 [Link].732 918 3565 I mtkpower_client: perf_lock_rel, hdl:26995,
tid:3565
05-19 [Link].733 918 3565 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3565
05-19 [Link].733 479 1594 I libPowerHal: [PD] scn:2 hdl:26995
lock_user:[email protected] pid:918 tid:3566 dur:0
05-19 [Link].734 918 3565 I mtkpower_client: ret_hdl:26997
05-19 [Link].734 918 3565 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3565
05-19 [Link].734 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:26997 hint:-1
pid:918 duration:0 => ret_hdl:26997
05-19 [Link].734 479 1594 I libPowerHal: [PE] scn:1 hdl:26997
lock_user:[email protected] pid:918 tid:3565 dur:0
05-19 [Link].735 918 3565 I mtkpower_client: ret_hdl:26998
05-19 [Link].736 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:26998 hint:-1
pid:918 duration:0 => ret_hdl:26998
05-19 [Link].736 479 1594 I libPowerHal: [PE] scn:2 hdl:26998
lock_user:[email protected] pid:918 tid:3565 dur:0
05-19 [Link].839 918 15538 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].839 918 15538 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].841 918 15538 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].841 918 15538 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].841 918 15538 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].842 918 15538 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].843 918 15538 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].874 918 3565 I mtkpower_client: perf_lock_rel, hdl:26998,
tid:3565
05-19 [Link].875 918 3615 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d71810
05-19 [Link].875 918 3615 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].875 918 3615 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].876 479 1594 I libPowerHal: [PD] scn:2 hdl:26998
lock_user:[email protected] pid:918 tid:3565 dur:0
05-19 [Link].885 918 3615 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].885 918 3615 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 23516
05-19 [Link].885 918 3615 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3d8e000
05-19 [Link].885 918 3615 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].888 918 3621 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3621
05-19 [Link].889 918 3621 I mtkpower_client: ret_hdl:27003
05-19 [Link].892 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27003 hint:-1
pid:918 duration:0 => ret_hdl:27003
05-19 [Link].893 479 1594 I libPowerHal: [PE] scn:2 hdl:27003
lock_user:[email protected] pid:918 tid:3621 dur:0
05-19 [Link].899 918 3615 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].900 918 3615 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].900 918 3615 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].900 918 3615 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].900 918 3615 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].052 918 3560 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].074 918 3560 I mtkpower_client: perf_lock_rel, hdl:26998,
tid:3560
05-19 [Link].075 918 3560 I mtkpower_client: perf_lock_rel, hdl:26997,
tid:3560
05-19 [Link].075 918 3560 I mtkpower_client: perf_lock_rel, hdl:26995,
tid:3560
05-19 [Link].076 479 1594 I libPowerHal: [PD] scn:1 hdl:26997
lock_user:[email protected] pid:918 tid:3565 dur:0
05-19 [Link].203 918 3620 I mtkpower_client: perf_lock_rel, hdl:27003,
tid:3620
05-19 [Link].203 918 3620 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3620
05-19 [Link].204 479 1594 I libPowerHal: [PD] scn:2 hdl:27003
lock_user:[email protected] pid:918 tid:3621 dur:0
05-19 [Link].205 918 3620 I mtkpower_client: ret_hdl:27004
05-19 [Link].205 918 3620 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3620
05-19 [Link].205 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27004 hint:-1
pid:918 duration:0 => ret_hdl:27004
05-19 [Link].205 479 1594 I libPowerHal: [PE] scn:1 hdl:27004
lock_user:[email protected] pid:918 tid:3620 dur:0
05-19 [Link].205 918 3620 I mtkpower_client: ret_hdl:27005
05-19 [Link].206 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27005 hint:-1
pid:918 duration:0 => ret_hdl:27005
05-19 [Link].206 479 1594 I libPowerHal: [PE] scn:2 hdl:27005
lock_user:[email protected] pid:918 tid:3620 dur:0
05-19 [Link].248 918 3620 I mtkpower_client: perf_lock_rel, hdl:27005,
tid:3620
05-19 [Link].249 479 1594 I libPowerHal: [PD] scn:2 hdl:27005
lock_user:[email protected] pid:918 tid:3620 dur:0
05-19 [Link].768 918 1088 E OMXNodeInstance:
setParameter(0xe9930804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].769 918 1088 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].772 918 1088 E MtkOmxVdecEx: [0xe9930800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].772 918 1088 E OMXNodeInstance:
setConfig(0xe9930804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].772 918 1088 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].773 918 1959 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].773 918 15538 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].809 918 3667 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].809 918 3667 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].810 918 3667 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].811 918 3667 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].811 918 3667 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 74446
05-19 [Link].811 918 3667 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1d5e000
05-19 [Link].811 918 3667 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].815 918 3681 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3681
05-19 [Link].816 918 3681 I mtkpower_client: ret_hdl:27011
05-19 [Link].816 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27011 hint:-1
pid:918 duration:0 => ret_hdl:27011
05-19 [Link].816 479 1594 I libPowerHal: [PE] scn:0 hdl:27011
lock_user:[email protected] pid:918 tid:3681 dur:0
05-19 [Link].837 918 3667 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].838 918 3667 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].838 918 3667 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].838 918 3667 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].838 918 3667 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].979 918 3614 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].997 918 3614 I mtkpower_client: perf_lock_rel, hdl:27005,
tid:3614
05-19 [Link].998 918 3614 I mtkpower_client: perf_lock_rel, hdl:27004,
tid:3614
05-19 [Link].998 479 1594 I libPowerHal: [PD] scn:1 hdl:27004
lock_user:[email protected] pid:918 tid:3620 dur:0
05-19 [Link].999 918 3614 I mtkpower_client: perf_lock_rel, hdl:27003,
tid:3614
05-19 [Link].159 918 3680 I mtkpower_client: perf_lock_rel, hdl:27011,
tid:3680
05-19 [Link].160 918 3680 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3680
05-19 [Link].161 479 1594 I libPowerHal: [PD] scn:0 hdl:27011
lock_user:[email protected] pid:918 tid:3681 dur:0
05-19 [Link].162 918 3680 I mtkpower_client: ret_hdl:27012
05-19 [Link].163 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27012 hint:-1
pid:918 duration:0 => ret_hdl:27012
05-19 [Link].163 479 1594 I libPowerHal: [PE] scn:1 hdl:27012
lock_user:[email protected] pid:918 tid:3680 dur:0
05-19 [Link].504 918 1959 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].504 918 1959 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].507 918 1959 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].507 918 1959 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].509 918 1959 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].509 918 1959 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 1959 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].546 918 3761 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fb4810
05-19 [Link].547 918 3761 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].547 918 3761 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].553 918 3761 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].554 918 3761 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 44085
05-19 [Link].554 918 3761 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3d8e000
05-19 [Link].554 918 3761 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].557 918 3765 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3765
05-19 [Link].559 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27018 hint:-1
pid:918 duration:0 => ret_hdl:27018
05-19 [Link].559 479 1594 I libPowerHal: [PE] scn:2 hdl:27018
lock_user:[email protected] pid:918 tid:3765 dur:0
05-19 [Link].561 918 3765 I mtkpower_client: ret_hdl:27018
05-19 [Link].579 918 3761 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].579 918 3761 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].579 918 3761 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].579 918 3761 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].579 918 3761 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].670 918 3680 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3680
05-19 [Link].672 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27019 hint:-1
pid:918 duration:0 => ret_hdl:27019
05-19 [Link].672 479 1594 I libPowerHal: [PE] scn:3 hdl:27019
lock_user:[email protected] pid:918 tid:3680 dur:0
05-19 [Link].674 918 3680 I mtkpower_client: ret_hdl:27019
05-19 [Link].808 918 3666 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].827 918 3666 I mtkpower_client: perf_lock_rel, hdl:27019,
tid:3666
05-19 [Link].828 918 3666 I mtkpower_client: perf_lock_rel, hdl:27012,
tid:3666
05-19 [Link].829 479 1594 I libPowerHal: [PD] scn:3 hdl:27019
lock_user:[email protected] pid:918 tid:3680 dur:0
05-19 [Link].829 918 3666 I mtkpower_client: perf_lock_rel, hdl:27011,
tid:3666
05-19 [Link].830 479 1594 I libPowerHal: [PD] scn:1 hdl:27012
lock_user:[email protected] pid:918 tid:3680 dur:0
05-19 [Link].881 918 3764 I mtkpower_client: perf_lock_rel, hdl:27018,
tid:3764
05-19 [Link].881 918 3764 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3764
05-19 [Link].882 479 1594 I libPowerHal: [PD] scn:2 hdl:27018
lock_user:[email protected] pid:918 tid:3765 dur:0
05-19 [Link].883 918 3764 I mtkpower_client: ret_hdl:27020
05-19 [Link].883 918 3764 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3764
05-19 [Link].885 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27020 hint:-1
pid:918 duration:0 => ret_hdl:27020
05-19 [Link].885 479 1594 I libPowerHal: [PE] scn:1 hdl:27020
lock_user:[email protected] pid:918 tid:3764 dur:0
05-19 [Link].886 918 3764 I mtkpower_client: ret_hdl:27021
05-19 [Link].886 918 3764 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3764
05-19 [Link].887 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27021 hint:-1
pid:918 duration:0 => ret_hdl:27021
05-19 [Link].888 479 1594 I libPowerHal: [PE] scn:2 hdl:27021
lock_user:[email protected] pid:918 tid:3764 dur:0
05-19 [Link].889 918 3764 I mtkpower_client: ret_hdl:27022
05-19 [Link].889 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27022 hint:-1
pid:918 duration:0 => ret_hdl:27022
05-19 [Link].889 479 1594 I libPowerHal: [PE] scn:3 hdl:27022
lock_user:[email protected] pid:918 tid:3764 dur:0
05-19 [Link].220 918 3764 I mtkpower_client: perf_lock_rel, hdl:27022,
tid:3764
05-19 [Link].221 479 1594 I libPowerHal: [PD] scn:3 hdl:27022
lock_user:[email protected] pid:918 tid:3764 dur:0
05-19 [Link].497 918 3756 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].506 918 3756 I mtkpower_client: perf_lock_rel, hdl:27022,
tid:3756
05-19 [Link].507 918 3756 I mtkpower_client: perf_lock_rel, hdl:27021,
tid:3756
05-19 [Link].507 918 3756 I mtkpower_client: perf_lock_rel, hdl:27020,
tid:3756
05-19 [Link].507 918 3756 I mtkpower_client: perf_lock_rel, hdl:27018,
tid:3756
05-19 [Link].508 479 1594 I libPowerHal: [PD] scn:2 hdl:27021
lock_user:[email protected] pid:918 tid:3764 dur:0
05-19 [Link].508 918 3756 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].510 918 3756 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].510 918 3756 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].510 479 1594 I libPowerHal: [PD] scn:1 hdl:27020
lock_user:[email protected] pid:918 tid:3764 dur:0
05-19 [Link].510 918 3756 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].009 918 1960 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].011 918 1960 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].015 918 1960 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].015 918 1960 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].015 918 1960 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].016 918 1960 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].016 918 1960 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].058 918 3818 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].058 918 3818 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].059 918 3818 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].059 918 3818 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].059 918 3818 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].059 918 3818 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].059 918 3818 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].059 918 3818 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].064 918 3818 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].064 918 3818 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 44085
05-19 [Link].064 918 3818 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].064 918 3818 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].067 918 3826 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3826
05-19 [Link].069 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27031 hint:-1
pid:918 duration:0 => ret_hdl:27031
05-19 [Link].069 479 1594 I libPowerHal: [PE] scn:0 hdl:27031
lock_user:[email protected] pid:918 tid:3826 dur:0
05-19 [Link].070 918 3826 I mtkpower_client: ret_hdl:27031
05-19 [Link].081 918 3818 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].081 918 3818 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].081 918 3818 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].081 918 3818 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].081 918 3818 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].231 918 3817 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].238 918 3817 I mtkpower_client: perf_lock_rel, hdl:27031,
tid:3817
05-19 [Link].240 918 3817 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].240 479 1594 I libPowerHal: [PD] scn:0 hdl:27031
lock_user:[email protected] pid:918 tid:3826 dur:0
05-19 [Link].240 918 3817 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].240 918 3817 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].240 918 3817 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].446 918 1960 E OMXNodeInstance:
setParameter(0xea21f804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].446 918 1960 E OMXNodeInstance:
getParameter(0xea21f804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].449 918 1088 E MtkOmxVdecEx: [0xea21f800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].450 918 1088 E OMXNodeInstance:
setConfig(0xea21f804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].450 918 1959 E OMXNodeInstance:
getParameter(0xea21f804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].450 918 1959 E OMXNodeInstance:
getConfig(0xea21f804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].450 918 1960 E OMXNodeInstance:
getConfig(0xea21f804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].513 918 3900 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].513 918 3900 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].513 918 3900 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].513 918 3900 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].513 918 3900 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].514 918 3900 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].514 918 3900 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].514 918 3900 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].516 918 3900 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].516 918 3900 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18366
05-19 [Link].516 918 3900 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].517 918 3900 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].519 918 3905 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3905
05-19 [Link].520 918 3905 I mtkpower_client: ret_hdl:27033
05-19 [Link].520 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27033 hint:-1
pid:918 duration:0 => ret_hdl:27033
05-19 [Link].520 479 1594 I libPowerHal: [PE] scn:0 hdl:27033
lock_user:[email protected] pid:918 tid:3905 dur:0
05-19 [Link].524 918 3900 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].524 918 3900 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].524 918 3900 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].524 918 3900 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].524 918 3900 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].740 918 3904 I mtkpower_client: perf_lock_rel, hdl:27033,
tid:3904
05-19 [Link].741 918 3904 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3904
05-19 [Link].744 479 1594 I libPowerHal: [PD] scn:0 hdl:27033
lock_user:[email protected] pid:918 tid:3905 dur:0
05-19 [Link].746 918 3904 I mtkpower_client: ret_hdl:27037
05-19 [Link].746 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27037 hint:-1
pid:918 duration:0 => ret_hdl:27037
05-19 [Link].746 479 1594 I libPowerHal: [PE] scn:2 hdl:27037
lock_user:[email protected] pid:918 tid:3904 dur:0
05-19 [Link].836 918 11990 E OMXNodeInstance:
setParameter(0xe9fb2004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].837 918 15680 E OMXNodeInstance:
getParameter(0xe9fb2004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].842 918 15538 E MtkOmxVdecEx: [0xe9fb2000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].842 918 15538 E OMXNodeInstance:
setConfig(0xe9fb2004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].842 918 15680 E OMXNodeInstance:
getParameter(0xe9fb2004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].843 918 11990 E OMXNodeInstance:
getConfig(0xe9fb2004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].844 918 1960 E OMXNodeInstance:
getConfig(0xe9fb2004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].038 918 3958 E VDO_LOG : GetDecoderAPI hWrapper 0xe9cc1810
05-19 [Link].038 918 3958 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].038 918 3958 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].039 918 3958 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].039 918 3958 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 51505
05-19 [Link].039 918 3958 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdeed4000
05-19 [Link].039 918 3958 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].044 918 3970 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3970
05-19 [Link].046 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27040 hint:-1
pid:918 duration:0 => ret_hdl:27040
05-19 [Link].046 479 1594 I libPowerHal: [PE] scn:3 hdl:27040
lock_user:[email protected] pid:918 tid:3970 dur:0
05-19 [Link].047 918 3970 I mtkpower_client: ret_hdl:27040
05-19 [Link].103 918 3904 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3904
05-19 [Link].105 918 3904 I mtkpower_client: ret_hdl:27041
05-19 [Link].105 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27041 hint:-1
pid:918 duration:0 => ret_hdl:27041
05-19 [Link].105 479 1594 I libPowerHal: [PE] scn:1 hdl:27041
lock_user:[email protected] pid:918 tid:3904 dur:0
05-19 [Link].131 918 3958 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].131 918 3958 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].131 918 3958 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].131 918 3958 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].131 918 3958 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].268 918 3899 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].332 918 3899 I mtkpower_client: perf_lock_rel, hdl:27041,
tid:3899
05-19 [Link].332 918 3899 I mtkpower_client: perf_lock_rel, hdl:27037,
tid:3899
05-19 [Link].333 918 3899 I mtkpower_client: perf_lock_rel, hdl:27033,
tid:3899
05-19 [Link].338 479 1594 I libPowerHal: [PD] scn:1 hdl:27041
lock_user:[email protected] pid:918 tid:3904 dur:0
05-19 [Link].338 479 1594 I libPowerHal: [PD] scn:2 hdl:27037
lock_user:[email protected] pid:918 tid:3904 dur:0
05-19 [Link].502 918 3967 I mtkpower_client: perf_lock_rel, hdl:27040,
tid:3967
05-19 [Link].502 918 3967 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3967
05-19 [Link].502 479 1594 I libPowerHal: [PD] scn:3 hdl:27040
lock_user:[email protected] pid:918 tid:3970 dur:0
05-19 [Link].503 918 3967 I mtkpower_client: ret_hdl:27042
05-19 [Link].503 918 3967 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3967
05-19 [Link].504 918 3967 I mtkpower_client: ret_hdl:27043
05-19 [Link].504 918 3967 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3967
05-19 [Link].505 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27042 hint:-1
pid:918 duration:0 => ret_hdl:27042
05-19 [Link].505 479 1594 I libPowerHal: [PE] scn:1 hdl:27042
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].506 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27043 hint:-1
pid:918 duration:0 => ret_hdl:27043
05-19 [Link].506 479 1594 I libPowerHal: [PE] scn:2 hdl:27043
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].507 918 3967 I mtkpower_client: ret_hdl:27044
05-19 [Link].508 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27044 hint:-1
pid:918 duration:0 => ret_hdl:27044
05-19 [Link].508 479 1594 I libPowerHal: [PE] scn:3 hdl:27044
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].661 918 3967 I mtkpower_client: perf_lock_rel, hdl:27044,
tid:3967
05-19 [Link].662 479 1594 I libPowerHal: [PD] scn:3 hdl:27044
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].744 918 3967 I mtkpower_client: perf_lock_rel, hdl:27043,
tid:3967
05-19 [Link].745 479 1594 I libPowerHal: [PD] scn:2 hdl:27043
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].444 918 15680 E OMXNodeInstance:
setParameter(0xea486004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].445 918 15680 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].447 918 15680 E MtkOmxVdecEx: [0xea486000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].447 918 15680 E OMXNodeInstance:
setConfig(0xea486004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].448 918 15680 E OMXNodeInstance:
getParameter(0xea486004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].449 918 15680 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].451 918 15680 E OMXNodeInstance:
getConfig(0xea486004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].497 918 4020 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].497 918 4020 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].497 918 4020 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].498 918 4020 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].498 918 4020 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 30062
05-19 [Link].498 918 4020 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].498 918 4020 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].504 918 4025 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4025
05-19 [Link].505 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27055 hint:-1
pid:918 duration:0 => ret_hdl:27055
05-19 [Link].505 479 1594 I libPowerHal: [PE] scn:3 hdl:27055
lock_user:[email protected] pid:918 tid:4025 dur:0
05-19 [Link].505 918 4025 I mtkpower_client: ret_hdl:27055
05-19 [Link].517 918 4020 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].517 918 4020 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].517 918 4020 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].517 918 4020 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].517 918 4020 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].618 918 3967 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:3967
05-19 [Link].619 918 3967 I mtkpower_client: ret_hdl:27056
05-19 [Link].619 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27056 hint:-1
pid:918 duration:0 => ret_hdl:27056
05-19 [Link].619 479 1594 I libPowerHal: [PE] scn:2 hdl:27056
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].734 918 4024 I mtkpower_client: perf_lock_rel, hdl:27055,
tid:4024
05-19 [Link].734 918 4024 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4024
05-19 [Link].735 479 1594 I libPowerHal: [PD] scn:3 hdl:27055
lock_user:[email protected] pid:918 tid:4025 dur:0
05-19 [Link].736 918 4024 I mtkpower_client: ret_hdl:27057
05-19 [Link].736 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27057 hint:-1
pid:918 duration:0 => ret_hdl:27057
05-19 [Link].736 479 1594 I libPowerHal: [PE] scn:3 hdl:27057
lock_user:[email protected] pid:918 tid:4024 dur:0
05-19 [Link].786 918 3957 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].796 918 3957 I mtkpower_client: perf_lock_rel, hdl:27044,
tid:3957
05-19 [Link].796 918 3957 I mtkpower_client: perf_lock_rel, hdl:27056,
tid:3957
05-19 [Link].796 918 3957 I mtkpower_client: perf_lock_rel, hdl:27042,
tid:3957
05-19 [Link].796 918 3957 I mtkpower_client: perf_lock_rel, hdl:27040,
tid:3957
05-19 [Link].798 479 1594 I libPowerHal: [PD] scn:2 hdl:27056
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].800 479 1594 I libPowerHal: [PD] scn:1 hdl:27042
lock_user:[email protected] pid:918 tid:3967 dur:0
05-19 [Link].227 918 1088 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].227 918 32757 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].234 918 15680 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].235 918 15680 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].235 918 15680 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].235 918 1960 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].236 918 1088 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].281 918 4091 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].281 918 4091 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].281 918 4091 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].282 918 4091 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].282 918 4091 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16496
05-19 [Link].282 918 4091 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf772000
05-19 [Link].282 918 4091 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].285 918 4095 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4095
05-19 [Link].287 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27063 hint:-1
pid:918 duration:0 => ret_hdl:27063
05-19 [Link].287 479 1594 I libPowerHal: [PE] scn:0 hdl:27063
lock_user:[email protected] pid:918 tid:4095 dur:0
05-19 [Link].288 918 4095 I mtkpower_client: ret_hdl:27063
05-19 [Link].304 918 4091 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].304 918 4091 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].304 918 4091 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].304 918 4091 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].304 918 4091 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].473 918 4019 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].497 918 4019 I mtkpower_client: perf_lock_rel, hdl:27057,
tid:4019
05-19 [Link].497 479 1594 I libPowerHal: [PD] scn:3 hdl:27057
lock_user:[email protected] pid:918 tid:4024 dur:0
05-19 [Link].500 918 4019 I mtkpower_client: perf_lock_rel, hdl:27055,
tid:4019
05-19 [Link].530 918 4094 I mtkpower_client: perf_lock_rel, hdl:27063,
tid:4094
05-19 [Link].530 918 4094 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4094
05-19 [Link].531 479 1594 I libPowerHal: [PD] scn:0 hdl:27063
lock_user:[email protected] pid:918 tid:4095 dur:0
05-19 [Link].532 918 4094 I mtkpower_client: ret_hdl:27064
05-19 [Link].532 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27064 hint:-1
pid:918 duration:0 => ret_hdl:27064
05-19 [Link].532 479 1594 I libPowerHal: [PE] scn:2 hdl:27064
lock_user:[email protected] pid:918 tid:4094 dur:0
05-19 [Link].918 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27066
hint:1157 pid:501 duration:80 => ret_hdl:27066
05-19 [Link].918 479 1594 I libPowerHal: [PE] scn:1 hdl:27066 hint:1157
comm:[email protected] pid:501
05-19 [Link].053 918 32757 E OMXNodeInstance:
setParameter(0xe9fb2004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].054 918 32757 E OMXNodeInstance:
getParameter(0xe9fb2004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].056 918 32757 E MtkOmxVdecEx: [0xe9fb2000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].056 918 32757 E OMXNodeInstance:
setConfig(0xe9fb2004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].056 918 32757 E OMXNodeInstance:
getParameter(0xe9fb2004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].057 918 32757 E OMXNodeInstance:
getConfig(0xe9fb2004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].057 918 32757 E OMXNodeInstance:
getConfig(0xe9fb2004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].089 918 4140 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].089 918 4140 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].089 918 4140 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].090 918 4140 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].090 918 4140 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 19020
05-19 [Link].090 918 4140 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].090 918 4140 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].099 918 4146 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4146
05-19 [Link].101 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27070 hint:-1
pid:918 duration:0 => ret_hdl:27070
05-19 [Link].101 479 1594 I libPowerHal: [PE] scn:1 hdl:27070
lock_user:[email protected] pid:918 tid:4146 dur:0
05-19 [Link].101 918 4146 I mtkpower_client: ret_hdl:27070
05-19 [Link].117 918 4140 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].117 918 4140 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].117 918 4140 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].117 918 4140 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].117 918 4140 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].281 918 4089 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].302 918 4089 I mtkpower_client: perf_lock_rel, hdl:27064,
tid:4089
05-19 [Link].302 918 4089 I mtkpower_client: perf_lock_rel, hdl:27063,
tid:4089
05-19 [Link].304 479 1594 I libPowerHal: [PD] scn:2 hdl:27064
lock_user:[email protected] pid:918 tid:4094 dur:0
05-19 [Link].415 918 4145 I mtkpower_client: perf_lock_rel, hdl:27070,
tid:4145
05-19 [Link].416 918 4145 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4145
05-19 [Link].416 479 1594 I libPowerHal: [PD] scn:1 hdl:27070
lock_user:[email protected] pid:918 tid:4146 dur:0
05-19 [Link].417 918 4145 I mtkpower_client: ret_hdl:27071
05-19 [Link].417 918 4145 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4145
05-19 [Link].418 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27071 hint:-1
pid:918 duration:0 => ret_hdl:27071
05-19 [Link].418 479 1594 I libPowerHal: [PE] scn:1 hdl:27071
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].423 918 4145 I mtkpower_client: ret_hdl:27072
05-19 [Link].423 918 4145 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4145
05-19 [Link].423 918 4145 I mtkpower_client: ret_hdl:27073
05-19 [Link].424 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27072 hint:-1
pid:918 duration:0 => ret_hdl:27072
05-19 [Link].424 479 1594 I libPowerHal: [PE] scn:2 hdl:27072
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].426 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27073 hint:-1
pid:918 duration:0 => ret_hdl:27073
05-19 [Link].426 479 1594 I libPowerHal: [PE] scn:3 hdl:27073
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].474 918 4145 I mtkpower_client: perf_lock_rel, hdl:27073,
tid:4145
05-19 [Link].476 479 1594 I libPowerHal: [PD] scn:3 hdl:27073
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].571 918 4145 I mtkpower_client: perf_lock_rel, hdl:27072,
tid:4145
05-19 [Link].572 479 1594 I libPowerHal: [PD] scn:2 hdl:27072
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].490 918 13399 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].491 918 13399 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].496 918 13399 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].496 918 13399 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].497 918 13399 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].498 918 13399 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].498 918 13399 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].564 918 4209 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].564 918 4209 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].564 918 4209 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].565 918 4209 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].565 918 4209 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 30545
05-19 [Link].565 918 4209 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf77f000
05-19 [Link].565 918 4209 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].576 918 4213 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4213
05-19 [Link].582 918 4213 I mtkpower_client: ret_hdl:27082
05-19 [Link].582 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27082 hint:-1
pid:918 duration:0 => ret_hdl:27082
05-19 [Link].582 479 1594 I libPowerHal: [PE] scn:2 hdl:27082
lock_user:[email protected] pid:918 tid:4213 dur:0
05-19 [Link].585 918 4209 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].585 918 4209 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].585 918 4209 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].585 918 4209 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].585 918 4209 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].684 918 4145 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4145
05-19 [Link].685 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27083 hint:-1
pid:918 duration:0 => ret_hdl:27083
05-19 [Link].685 479 1594 I libPowerHal: [PE] scn:4 hdl:27083
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].686 918 4145 I mtkpower_client: ret_hdl:27083
05-19 [Link].911 918 4212 I mtkpower_client: perf_lock_rel, hdl:27082,
tid:4212
05-19 [Link].911 918 4212 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4212
05-19 [Link].912 918 4145 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4145
05-19 [Link].916 479 1594 I libPowerHal: [PD] scn:2 hdl:27082
lock_user:[email protected] pid:918 tid:4213 dur:0
05-19 [Link].917 918 4212 I mtkpower_client: ret_hdl:27086
05-19 [Link].917 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27086 hint:-1
pid:918 duration:0 => ret_hdl:27086
05-19 [Link].917 479 1594 I libPowerHal: [PE] scn:3 hdl:27086
lock_user:[email protected] pid:918 tid:4212 dur:0
05-19 [Link].918 918 4145 I mtkpower_client: ret_hdl:27087
05-19 [Link].919 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27087 hint:-1
pid:918 duration:0 => ret_hdl:27087
05-19 [Link].919 479 1594 I libPowerHal: [PE] scn:2 hdl:27087
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].075 918 4139 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].089 918 4139 I mtkpower_client: perf_lock_rel, hdl:27087,
tid:4139
05-19 [Link].089 918 4139 I mtkpower_client: perf_lock_rel, hdl:27083,
tid:4139
05-19 [Link].090 918 4139 I mtkpower_client: perf_lock_rel, hdl:27071,
tid:4139
05-19 [Link].090 918 4139 I mtkpower_client: perf_lock_rel, hdl:27070,
tid:4139
05-19 [Link].092 479 1594 I libPowerHal: [PD] scn:2 hdl:27087
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].110 479 1594 I libPowerHal: [PD] scn:4 hdl:27083
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].119 479 1594 I libPowerHal: [PD] scn:1 hdl:27071
lock_user:[email protected] pid:918 tid:4145 dur:0
05-19 [Link].557 918 5020 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].557 918 5020 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].561 918 15680 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].561 918 15680 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].561 918 1088 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].562 918 15538 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].562 918 918 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].612 918 4271 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].612 918 4271 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].612 918 4271 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].612 918 4271 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].613 918 4271 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16524
05-19 [Link].613 918 4271 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].613 918 4271 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].620 918 4275 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4275
05-19 [Link].621 918 4275 I mtkpower_client: ret_hdl:27093
05-19 [Link].621 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27093 hint:-1
pid:918 duration:0 => ret_hdl:27093
05-19 [Link].621 479 1594 I libPowerHal: [PE] scn:1 hdl:27093
lock_user:[email protected] pid:918 tid:4275 dur:0
05-19 [Link].629 918 4271 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].629 918 4271 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].629 918 4271 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].629 918 4271 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].629 918 4271 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].763 918 4208 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].792 918 4208 I mtkpower_client: perf_lock_rel, hdl:27086,
tid:4208
05-19 [Link].793 918 4208 I mtkpower_client: perf_lock_rel, hdl:27082,
tid:4208
05-19 [Link].794 479 1594 I libPowerHal: [PD] scn:3 hdl:27086
lock_user:[email protected] pid:918 tid:4212 dur:0
05-19 [Link].894 918 4274 I mtkpower_client: perf_lock_rel, hdl:27093,
tid:4274
05-19 [Link].894 918 4274 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4274
05-19 [Link].898 918 4274 I mtkpower_client: ret_hdl:27094
05-19 [Link].902 479 1594 I libPowerHal: [PD] scn:1 hdl:27093
lock_user:[email protected] pid:918 tid:4275 dur:0
05-19 [Link].906 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27094 hint:-1
pid:918 duration:0 => ret_hdl:27094
05-19 [Link].906 479 1594 I libPowerHal: [PE] scn:2 hdl:27094
lock_user:[email protected] pid:918 tid:4274 dur:0
05-19 [Link].291 918 1065 E OMXNodeInstance:
setParameter(0xe9cc0804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].292 918 1065 E OMXNodeInstance:
getParameter(0xe9cc0804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].296 918 1065 E MtkOmxVdecEx: [0xe9cc0800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].297 918 1065 E OMXNodeInstance:
setConfig(0xe9cc0804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].297 918 1960 E OMXNodeInstance:
getParameter(0xe9cc0804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].297 918 1960 E OMXNodeInstance:
getConfig(0xe9cc0804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].298 918 1088 E OMXNodeInstance:
getConfig(0xe9cc0804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].343 918 4346 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c75810
05-19 [Link].343 918 4346 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].343 918 4346 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].347 918 4346 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].347 918 4346 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 47214
05-19 [Link].347 918 4346 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf84a000
05-19 [Link].347 918 4346 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].349 918 4350 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4350
05-19 [Link].350 918 4350 I mtkpower_client: ret_hdl:27100
05-19 [Link].351 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27100 hint:-1
pid:918 duration:0 => ret_hdl:27100
05-19 [Link].351 479 1594 I libPowerHal: [PE] scn:0 hdl:27100
lock_user:[email protected] pid:918 tid:4350 dur:0
05-19 [Link].364 918 4346 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].364 918 4346 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].364 918 4346 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].364 918 4346 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].365 918 4346 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].453 918 4269 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].482 918 4269 I mtkpower_client: perf_lock_rel, hdl:27094,
tid:4269
05-19 [Link].484 918 4269 I mtkpower_client: perf_lock_rel, hdl:27093,
tid:4269
05-19 [Link].485 479 1594 I libPowerHal: [PD] scn:2 hdl:27094
lock_user:[email protected] pid:918 tid:4274 dur:0
05-19 [Link].690 918 4349 I mtkpower_client: perf_lock_rel, hdl:27100,
tid:4349
05-19 [Link].693 479 1594 I libPowerHal: [PD] scn:0 hdl:27100
lock_user:[email protected] pid:918 tid:4350 dur:0
05-19 [Link].694 918 4349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4349
05-19 [Link].696 918 4349 I mtkpower_client: ret_hdl:27102
05-19 [Link].696 918 4349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4349
05-19 [Link].697 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27102 hint:-1
pid:918 duration:0 => ret_hdl:27102
05-19 [Link].697 479 1594 I libPowerHal: [PE] scn:0 hdl:27102
lock_user:[email protected] pid:918 tid:4349 dur:0
05-19 [Link].698 918 4349 I mtkpower_client: ret_hdl:27103
05-19 [Link].698 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27103 hint:-1
pid:918 duration:0 => ret_hdl:27103
05-19 [Link].698 479 1594 I libPowerHal: [PE] scn:1 hdl:27103
lock_user:[email protected] pid:918 tid:4349 dur:0
05-19 [Link].780 918 4349 I mtkpower_client: perf_lock_rel, hdl:27103,
tid:4349
05-19 [Link].781 479 1594 I libPowerHal: [PD] scn:1 hdl:27103
lock_user:[email protected] pid:918 tid:4349 dur:0
05-19 [Link].072 918 11716 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].072 918 11716 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].075 918 11716 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].075 918 11716 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].076 918 11716 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].076 918 11716 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].077 918 11716 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].114 918 4442 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].114 918 4442 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].114 918 4442 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].115 918 4442 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].115 918 4442 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 26657
05-19 [Link].115 918 4442 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3d8e000
05-19 [Link].115 918 4442 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].117 918 4448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4448
05-19 [Link].118 918 4448 I mtkpower_client: ret_hdl:27108
05-19 [Link].119 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27108 hint:-1
pid:918 duration:0 => ret_hdl:27108
05-19 [Link].119 479 1594 I libPowerHal: [PE] scn:2 hdl:27108
lock_user:[email protected] pid:918 tid:4448 dur:0
05-19 [Link].126 918 4442 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].126 918 4442 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].126 918 4442 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].126 918 4442 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].126 918 4442 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].185 918 4344 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].214 918 4344 I mtkpower_client: perf_lock_rel, hdl:27103,
tid:4344
05-19 [Link].214 918 4344 I mtkpower_client: perf_lock_rel, hdl:27102,
tid:4344
05-19 [Link].215 918 4344 I mtkpower_client: perf_lock_rel, hdl:27100,
tid:4344
05-19 [Link].218 479 1594 I libPowerHal: [PD] scn:0 hdl:27102
lock_user:[email protected] pid:918 tid:4349 dur:0
05-19 [Link].448 918 4447 I mtkpower_client: perf_lock_rel, hdl:27108,
tid:4447
05-19 [Link].449 918 4447 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4447
05-19 [Link].450 479 1594 I libPowerHal: [PD] scn:2 hdl:27108
lock_user:[email protected] pid:918 tid:4448 dur:0
05-19 [Link].451 918 4447 I mtkpower_client: ret_hdl:27114
05-19 [Link].451 918 4447 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4447
05-19 [Link].452 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27114 hint:-1
pid:918 duration:0 => ret_hdl:27114
05-19 [Link].452 479 1594 I libPowerHal: [PE] scn:1 hdl:27114
lock_user:[email protected] pid:918 tid:4447 dur:0
05-19 [Link].453 918 4447 I mtkpower_client: ret_hdl:27115
05-19 [Link].453 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27115 hint:-1
pid:918 duration:0 => ret_hdl:27115
05-19 [Link].453 479 1594 I libPowerHal: [PE] scn:2 hdl:27115
lock_user:[email protected] pid:918 tid:4447 dur:0
05-19 [Link].638 918 4447 I mtkpower_client: perf_lock_rel, hdl:27115,
tid:4447
05-19 [Link].640 479 1594 I libPowerHal: [PD] scn:2 hdl:27115
lock_user:[email protected] pid:918 tid:4447 dur:0
05-19 [Link].661 918 918 E OMXNodeInstance:
setParameter(0xe9cc0804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].662 918 918 E OMXNodeInstance:
getParameter(0xe9cc0804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].671 918 918 E MtkOmxVdecEx: [0xe9cc0800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].671 918 918 E OMXNodeInstance:
setConfig(0xe9cc0804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].672 918 918 E OMXNodeInstance:
getParameter(0xe9cc0804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].673 918 918 E OMXNodeInstance:
getConfig(0xe9cc0804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].676 918 11716 E OMXNodeInstance:
getConfig(0xe9cc0804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].716 918 4428 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].734 918 4500 E VDO_LOG : GetDecoderAPI hWrapper 0xea004810
05-19 [Link].734 918 4500 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].734 918 4500 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].736 918 4500 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].736 918 4500 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18925
05-19 [Link].736 918 4500 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf549000
05-19 [Link].736 918 4500 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].743 918 4505 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4505
05-19 [Link].744 918 4428 I mtkpower_client: perf_lock_rel, hdl:27115,
tid:4428
05-19 [Link].745 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27116 hint:-1
pid:918 duration:0 => ret_hdl:27116
05-19 [Link].745 479 1594 I libPowerHal: [PE] scn:2 hdl:27116
lock_user:[email protected] pid:918 tid:4505 dur:0
05-19 [Link].746 918 4505 I mtkpower_client: ret_hdl:27116
05-19 [Link].746 918 4428 I mtkpower_client: perf_lock_rel, hdl:27114,
tid:4428
05-19 [Link].746 918 4428 I mtkpower_client: perf_lock_rel, hdl:27108,
tid:4428
05-19 [Link].750 479 1594 I libPowerHal: [PD] scn:1 hdl:27114
lock_user:[email protected] pid:918 tid:4447 dur:0
05-19 [Link].772 918 4500 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].772 918 4500 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].772 918 4500 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].772 918 4500 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].772 918 4500 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].986 918 4504 I mtkpower_client: perf_lock_rel, hdl:27116,
tid:4504
05-19 [Link].986 918 4504 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4504
05-19 [Link].987 479 1594 I libPowerHal: [PD] scn:2 hdl:27116
lock_user:[email protected] pid:918 tid:4505 dur:0
05-19 [Link].989 918 4504 I mtkpower_client: ret_hdl:27117
05-19 [Link].989 918 4504 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4504
05-19 [Link].989 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27117 hint:-1
pid:918 duration:0 => ret_hdl:27117
05-19 [Link].989 479 1594 I libPowerHal: [PE] scn:1 hdl:27117
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].990 918 4504 I mtkpower_client: ret_hdl:27118
05-19 [Link].990 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27118 hint:-1
pid:918 duration:0 => ret_hdl:27118
05-19 [Link].990 479 1594 I libPowerHal: [PE] scn:2 hdl:27118
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].161 918 4504 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4504
05-19 [Link].163 918 4504 I mtkpower_client: ret_hdl:27120
05-19 [Link].171 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27120 hint:-1
pid:918 duration:0 => ret_hdl:27120
05-19 [Link].171 479 1594 I libPowerHal: [PE] scn:0 hdl:27120
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].337 918 13399 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].338 918 13399 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].345 918 9097 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].345 918 9097 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].346 918 9097 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].346 918 15680 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].347 918 15680 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].370 918 4504 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4504
05-19 [Link].372 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27123 hint:-1
pid:918 duration:0 => ret_hdl:27123
05-19 [Link].372 479 1594 I libPowerHal: [PE] scn:4 hdl:27123
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].373 918 4504 I mtkpower_client: ret_hdl:27123
05-19 [Link].405 918 4552 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].405 918 4552 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].405 918 4552 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].406 918 4552 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].406 918 4552 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 37349
05-19 [Link].407 918 4552 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0959000
05-19 [Link].407 918 4552 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].430 918 4556 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4556
05-19 [Link].430 918 4556 I mtkpower_client: ret_hdl:27124
05-19 [Link].430 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27124 hint:-1
pid:918 duration:0 => ret_hdl:27124
05-19 [Link].431 479 1594 I libPowerHal: [PE] scn:6 hdl:27124
lock_user:[email protected] pid:918 tid:4556 dur:0
05-19 [Link].450 918 4552 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].450 918 4552 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].450 918 4552 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].450 918 4552 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].450 918 4552 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].495 918 4504 I mtkpower_client: perf_lock_rel, hdl:27123,
tid:4504
05-19 [Link].496 479 1594 I libPowerHal: [PD] scn:4 hdl:27123
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].711 918 4498 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].727 918 4498 I mtkpower_client: perf_lock_rel, hdl:27123,
tid:4498
05-19 [Link].728 918 4498 I mtkpower_client: perf_lock_rel, hdl:27120,
tid:4498
05-19 [Link].729 918 4498 I mtkpower_client: perf_lock_rel, hdl:27118,
tid:4498
05-19 [Link].729 918 4498 I mtkpower_client: perf_lock_rel, hdl:27117,
tid:4498
05-19 [Link].729 918 4498 I mtkpower_client: perf_lock_rel, hdl:27116,
tid:4498
05-19 [Link].731 479 1594 I libPowerHal: [PD] scn:0 hdl:27120
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].732 479 1594 I libPowerHal: [PD] scn:2 hdl:27118
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].733 479 1594 I libPowerHal: [PD] scn:1 hdl:27117
lock_user:[email protected] pid:918 tid:4504 dur:0
05-19 [Link].764 918 4555 I mtkpower_client: perf_lock_rel, hdl:27124,
tid:4555
05-19 [Link].765 918 4555 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4555
05-19 [Link].765 479 1594 I libPowerHal: [PD] scn:6 hdl:27124
lock_user:[email protected] pid:918 tid:4556 dur:0
05-19 [Link].767 918 4555 I mtkpower_client: ret_hdl:27127
05-19 [Link].767 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27127 hint:-1
pid:918 duration:0 => ret_hdl:27127
05-19 [Link].767 479 1594 I libPowerHal: [PE] scn:0 hdl:27127
lock_user:[email protected] pid:918 tid:4555 dur:0
05-19 [Link].898 918 4555 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4555
05-19 [Link].900 918 4555 I mtkpower_client: ret_hdl:27128
05-19 [Link].900 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27128 hint:-1
pid:918 duration:0 => ret_hdl:27128
05-19 [Link].900 479 1594 I libPowerHal: [PE] scn:1 hdl:27128
lock_user:[email protected] pid:918 tid:4555 dur:0
05-19 [Link].005 918 4555 I mtkpower_client: perf_lock_rel, hdl:27128,
tid:4555
05-19 [Link].006 479 1594 I libPowerHal: [PD] scn:1 hdl:27128
lock_user:[email protected] pid:918 tid:4555 dur:0
05-19 [Link].287 918 32757 E OMXNodeInstance:
setParameter(0xe9fb2004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].288 918 32757 E OMXNodeInstance:
getParameter(0xe9fb2004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].292 918 32757 E MtkOmxVdecEx: [0xe9fb2000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].292 918 32757 E OMXNodeInstance:
setConfig(0xe9fb2004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].293 918 32757 E OMXNodeInstance:
getParameter(0xe9fb2004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].293 918 32757 E OMXNodeInstance:
getConfig(0xe9fb2004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].294 918 32757 E OMXNodeInstance:
getConfig(0xe9fb2004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].328 918 4623 E VDO_LOG : GetDecoderAPI hWrapper 0xea004810
05-19 [Link].328 918 4623 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].328 918 4623 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].329 918 4623 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].329 918 4623 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 37493
05-19 [Link].329 918 4623 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].329 918 4623 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].333 918 4627 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4627
05-19 [Link].334 918 4627 I mtkpower_client: ret_hdl:27134
05-19 [Link].334 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27134 hint:-1
pid:918 duration:0 => ret_hdl:27134
05-19 [Link].334 479 1594 I libPowerHal: [PE] scn:2 hdl:27134
lock_user:[email protected] pid:918 tid:4627 dur:0
05-19 [Link].347 918 4623 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].347 918 4623 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].347 918 4623 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].347 918 4623 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].347 918 4623 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].444 918 4551 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].456 918 4551 I mtkpower_client: perf_lock_rel, hdl:27128,
tid:4551
05-19 [Link].457 918 4551 I mtkpower_client: perf_lock_rel, hdl:27127,
tid:4551
05-19 [Link].458 918 4551 I mtkpower_client: perf_lock_rel, hdl:27124,
tid:4551
05-19 [Link].459 479 1594 I libPowerHal: [PD] scn:0 hdl:27127
lock_user:[email protected] pid:918 tid:4555 dur:0
05-19 [Link].674 918 4626 I mtkpower_client: perf_lock_rel, hdl:27134,
tid:4626
05-19 [Link].675 918 4626 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4626
05-19 [Link].676 479 1594 I libPowerHal: [PD] scn:2 hdl:27134
lock_user:[email protected] pid:918 tid:4627 dur:0
05-19 [Link].679 918 4626 I mtkpower_client: ret_hdl:27135
05-19 [Link].679 918 4626 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4626
05-19 [Link].679 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27135 hint:-1
pid:918 duration:0 => ret_hdl:27135
05-19 [Link].679 479 1594 I libPowerHal: [PE] scn:0 hdl:27135
lock_user:[email protected] pid:918 tid:4626 dur:0
05-19 [Link].680 918 4626 I mtkpower_client: ret_hdl:27136
05-19 [Link].680 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27136 hint:-1
pid:918 duration:0 => ret_hdl:27136
05-19 [Link].680 479 1594 I libPowerHal: [PE] scn:2 hdl:27136
lock_user:[email protected] pid:918 tid:4626 dur:0
05-19 [Link].796 918 4626 I mtkpower_client: perf_lock_rel, hdl:27136,
tid:4626
05-19 [Link].797 479 1594 I libPowerHal: [PD] scn:2 hdl:27136
lock_user:[email protected] pid:918 tid:4626 dur:0
05-19 [Link].231 918 1088 E OMXNodeInstance:
setParameter(0xe9930804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].232 918 1088 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].234 918 4622 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].240 918 918 E MtkOmxVdecEx: [0xe9930800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].240 918 918 E OMXNodeInstance:
setConfig(0xe9930804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].242 918 918 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].242 918 5020 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].246 918 5020 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].285 918 4622 I mtkpower_client: perf_lock_rel, hdl:27136,
tid:4622
05-19 [Link].285 918 4622 I mtkpower_client: perf_lock_rel, hdl:27135,
tid:4622
05-19 [Link].285 918 4622 I mtkpower_client: perf_lock_rel, hdl:27134,
tid:4622
05-19 [Link].287 918 4622 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].287 479 1594 I libPowerHal: [PD] scn:0 hdl:27135
lock_user:[email protected] pid:918 tid:4626 dur:0
05-19 [Link].291 918 4622 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].294 918 4622 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].300 918 4622 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].311 918 4673 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].311 918 4673 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].311 918 4673 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].311 918 4673 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].311 918 4673 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].312 918 4673 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].312 918 4673 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].312 918 4673 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].317 918 4673 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].317 918 4673 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 19847
05-19 [Link].317 918 4673 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].318 918 4673 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].319 918 4679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4679
05-19 [Link].321 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27142 hint:-1
pid:918 duration:0 => ret_hdl:27142
05-19 [Link].321 479 1594 I libPowerHal: [PE] scn:0 hdl:27142
lock_user:[email protected] pid:918 tid:4679 dur:0
05-19 [Link].321 918 4679 I mtkpower_client: ret_hdl:27142
05-19 [Link].363 918 4673 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].363 918 4673 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].363 918 4673 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].363 918 4673 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].363 918 4673 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].666 918 4678 I mtkpower_client: perf_lock_rel, hdl:27142,
tid:4678
05-19 [Link].666 918 4678 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4678
05-19 [Link].666 479 1594 I libPowerHal: [PD] scn:0 hdl:27142
lock_user:[email protected] pid:918 tid:4679 dur:0
05-19 [Link].668 918 4678 I mtkpower_client: ret_hdl:27148
05-19 [Link].668 918 4678 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4678
05-19 [Link].668 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27148 hint:-1
pid:918 duration:0 => ret_hdl:27148
05-19 [Link].668 479 1594 I libPowerHal: [PE] scn:0 hdl:27148
lock_user:[email protected] pid:918 tid:4678 dur:0
05-19 [Link].669 918 4678 I mtkpower_client: ret_hdl:27149
05-19 [Link].669 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27149 hint:-1
pid:918 duration:0 => ret_hdl:27149
05-19 [Link].669 479 1594 I libPowerHal: [PE] scn:3 hdl:27149
lock_user:[email protected] pid:918 tid:4678 dur:0
05-19 [Link].739 918 4678 I mtkpower_client: perf_lock_rel, hdl:27149,
tid:4678
05-19 [Link].740 479 1594 I libPowerHal: [PD] scn:3 hdl:27149
lock_user:[email protected] pid:918 tid:4678 dur:0
05-19 [Link].821 918 5033 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].821 918 918 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].825 918 15680 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].825 918 15680 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].825 918 5033 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].825 918 15680 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].826 918 15680 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].866 918 4672 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].874 918 4729 E VDO_LOG : GetDecoderAPI hWrapper 0xe9e3d810
05-19 [Link].874 918 4729 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].874 918 4729 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].877 918 4729 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].877 918 4729 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21839
05-19 [Link].877 918 4729 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdec54000
05-19 [Link].877 918 4729 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].886 918 4672 I mtkpower_client: perf_lock_rel, hdl:27149,
tid:4672
05-19 [Link].887 918 4672 I mtkpower_client: perf_lock_rel, hdl:27148,
tid:4672
05-19 [Link].887 918 4672 I mtkpower_client: perf_lock_rel, hdl:27142,
tid:4672
05-19 [Link].888 479 1594 I libPowerHal: [PD] scn:0 hdl:27148
lock_user:[email protected] pid:918 tid:4678 dur:0
05-19 [Link].897 918 4736 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4736
05-19 [Link].898 918 4736 I mtkpower_client: ret_hdl:27150
05-19 [Link].899 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27150 hint:-1
pid:918 duration:0 => ret_hdl:27150
05-19 [Link].899 479 1594 I libPowerHal: [PE] scn:0 hdl:27150
lock_user:[email protected] pid:918 tid:4736 dur:0
05-19 [Link].916 918 4729 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].916 918 4729 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].916 918 4729 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].916 918 4729 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].916 918 4729 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].136 918 4733 I mtkpower_client: perf_lock_rel, hdl:27150,
tid:4733
05-19 [Link].137 918 4733 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4733
05-19 [Link].137 479 1594 I libPowerHal: [PD] scn:0 hdl:27150
lock_user:[email protected] pid:918 tid:4736 dur:0
05-19 [Link].138 918 4733 I mtkpower_client: ret_hdl:27154
05-19 [Link].138 918 4733 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4733
05-19 [Link].138 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27154 hint:-1
pid:918 duration:0 => ret_hdl:27154
05-19 [Link].138 479 1594 I libPowerHal: [PE] scn:0 hdl:27154
lock_user:[email protected] pid:918 tid:4733 dur:0
05-19 [Link].139 918 4733 I mtkpower_client: ret_hdl:27155
05-19 [Link].139 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27155 hint:-1
pid:918 duration:0 => ret_hdl:27155
05-19 [Link].140 479 1594 I libPowerHal: [PE] scn:4 hdl:27155
lock_user:[email protected] pid:918 tid:4733 dur:0
05-19 [Link].304 918 4733 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4733
05-19 [Link].306 918 4733 I mtkpower_client: ret_hdl:27158
05-19 [Link].306 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27158 hint:-1
pid:918 duration:0 => ret_hdl:27158
05-19 [Link].306 479 1594 I libPowerHal: [PE] scn:1 hdl:27158
lock_user:[email protected] pid:918 tid:4733 dur:0
05-19 [Link].379 918 4733 I mtkpower_client: perf_lock_rel, hdl:27158,
tid:4733
05-19 [Link].380 479 1594 I libPowerHal: [PD] scn:1 hdl:27158
lock_user:[email protected] pid:918 tid:4733 dur:0
05-19 [Link].434 918 4733 I mtkpower_client: perf_lock_rel, hdl:27155,
tid:4733
05-19 [Link].435 479 1594 I libPowerHal: [PD] scn:4 hdl:27155
lock_user:[email protected] pid:918 tid:4733 dur:0
05-19 [Link].448 918 4728 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].460 918 4728 I mtkpower_client: perf_lock_rel, hdl:27158,
tid:4728
05-19 [Link].460 918 4728 I mtkpower_client: perf_lock_rel, hdl:27155,
tid:4728
05-19 [Link].460 918 4728 I mtkpower_client: perf_lock_rel, hdl:27154,
tid:4728
05-19 [Link].461 918 4728 I mtkpower_client: perf_lock_rel, hdl:27150,
tid:4728
05-19 [Link].462 479 1594 I libPowerHal: [PD] scn:0 hdl:27154
lock_user:[email protected] pid:918 tid:4733 dur:0
05-19 [Link].462 918 4728 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].464 918 4728 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].464 918 4728 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].464 918 4728 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].549 918 918 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].550 918 5033 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].553 918 15538 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].553 918 15538 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].554 918 1960 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].554 918 1088 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].555 918 15538 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].585 918 4794 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].585 918 4794 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].585 918 4794 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].585 918 4794 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].585 918 4794 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].586 918 4794 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].586 918 4794 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].586 918 4794 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].587 918 4794 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].587 918 4794 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 22561
05-19 [Link].587 918 4794 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].587 918 4794 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].589 918 4800 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4800
05-19 [Link].590 918 4800 I mtkpower_client: ret_hdl:27159
05-19 [Link].591 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27159 hint:-1
pid:918 duration:0 => ret_hdl:27159
05-19 [Link].591 479 1594 I libPowerHal: [PE] scn:0 hdl:27159
lock_user:[email protected] pid:918 tid:4800 dur:0
05-19 [Link].596 918 4794 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].596 918 4794 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].596 918 4794 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].596 918 4794 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].596 918 4794 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].815 918 4799 I mtkpower_client: perf_lock_rel, hdl:27159,
tid:4799
05-19 [Link].816 918 4799 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4799
05-19 [Link].817 479 1594 I libPowerHal: [PD] scn:0 hdl:27159
lock_user:[email protected] pid:918 tid:4800 dur:0
05-19 [Link].817 918 4799 I mtkpower_client: ret_hdl:27160
05-19 [Link].817 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27160 hint:-1
pid:918 duration:0 => ret_hdl:27160
05-19 [Link].817 479 1594 I libPowerHal: [PE] scn:1 hdl:27160
lock_user:[email protected] pid:918 tid:4799 dur:0
05-19 [Link].092 918 15680 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].092 918 1088 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].097 918 1960 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].097 918 1960 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].098 918 1780 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].098 918 1088 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].099 918 1088 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].124 918 4799 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4799
05-19 [Link].126 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27166 hint:-1
pid:918 duration:0 => ret_hdl:27166
05-19 [Link].126 479 1594 I libPowerHal: [PE] scn:3 hdl:27166
lock_user:[email protected] pid:918 tid:4799 dur:0
05-19 [Link].127 918 4799 I mtkpower_client: ret_hdl:27166
05-19 [Link].151 918 4845 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c75810
05-19 [Link].151 918 4845 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].151 918 4845 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].152 918 4845 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].153 918 4845 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21839
05-19 [Link].153 918 4845 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdecdf000
05-19 [Link].153 918 4845 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].161 918 4856 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4856
05-19 [Link].162 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27167 hint:-1
pid:918 duration:0 => ret_hdl:27167
05-19 [Link].162 479 1594 I libPowerHal: [PE] scn:4 hdl:27167
lock_user:[email protected] pid:918 tid:4856 dur:0
05-19 [Link].163 918 4856 I mtkpower_client: ret_hdl:27167
05-19 [Link].184 918 4845 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].184 918 4845 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].184 918 4845 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].184 918 4845 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].184 918 4845 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].333 918 4793 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].363 918 4793 I mtkpower_client: perf_lock_rel, hdl:27166,
tid:4793
05-19 [Link].363 918 4793 I mtkpower_client: perf_lock_rel, hdl:27160,
tid:4793
05-19 [Link].363 918 4793 I mtkpower_client: perf_lock_rel, hdl:27159,
tid:4793
05-19 [Link].363 479 1594 I libPowerHal: [PD] scn:3 hdl:27166
lock_user:[email protected] pid:918 tid:4799 dur:0
05-19 [Link].365 479 1594 I libPowerHal: [PD] scn:1 hdl:27160
lock_user:[email protected] pid:918 tid:4799 dur:0
05-19 [Link].478 918 4855 I mtkpower_client: perf_lock_rel, hdl:27167,
tid:4855
05-19 [Link].479 918 4855 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4855
05-19 [Link].479 479 1594 I libPowerHal: [PD] scn:4 hdl:27167
lock_user:[email protected] pid:918 tid:4856 dur:0
05-19 [Link].481 918 4855 I mtkpower_client: ret_hdl:27168
05-19 [Link].481 918 4855 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4855
05-19 [Link].481 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27168 hint:-1
pid:918 duration:0 => ret_hdl:27168
05-19 [Link].481 479 1594 I libPowerHal: [PE] scn:1 hdl:27168
lock_user:[email protected] pid:918 tid:4855 dur:0
05-19 [Link].481 918 4855 I mtkpower_client: ret_hdl:27169
05-19 [Link].481 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27169 hint:-1
pid:918 duration:0 => ret_hdl:27169
05-19 [Link].482 479 1594 I libPowerHal: [PE] scn:2 hdl:27169
lock_user:[email protected] pid:918 tid:4855 dur:0
05-19 [Link].519 918 4855 I mtkpower_client: perf_lock_rel, hdl:27169,
tid:4855
05-19 [Link].520 479 1594 I libPowerHal: [PD] scn:2 hdl:27169
lock_user:[email protected] pid:918 tid:4855 dur:0
05-19 [Link].715 918 1960 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].715 918 1960 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].717 918 1960 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].717 918 1960 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].718 918 1960 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].718 918 1960 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].719 918 1960 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].757 918 4897 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].757 918 4897 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].757 918 4897 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].757 918 4897 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].757 918 4897 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 22561
05-19 [Link].757 918 4897 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe433b000
05-19 [Link].758 918 4897 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].759 918 4910 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4910
05-19 [Link].760 918 4910 I mtkpower_client: ret_hdl:27173
05-19 [Link].760 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27173 hint:-1
pid:918 duration:0 => ret_hdl:27173
05-19 [Link].760 479 1594 I libPowerHal: [PE] scn:2 hdl:27173
lock_user:[email protected] pid:918 tid:4910 dur:0
05-19 [Link].788 918 4897 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].788 918 4897 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].788 918 4897 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].788 918 4897 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].788 918 4897 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].564 918 4844 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].573 918 4844 I mtkpower_client: perf_lock_rel, hdl:27169,
tid:4844
05-19 [Link].573 918 4844 I mtkpower_client: perf_lock_rel, hdl:27168,
tid:4844
05-19 [Link].573 918 4844 I mtkpower_client: perf_lock_rel, hdl:27167,
tid:4844
05-19 [Link].575 479 1594 I libPowerHal: [PD] scn:1 hdl:27168
lock_user:[email protected] pid:918 tid:4855 dur:0
05-19 [Link].607 918 4905 I mtkpower_client: perf_lock_rel, hdl:27173,
tid:4905
05-19 [Link].607 918 4905 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4905
05-19 [Link].611 479 1594 I libPowerHal: [PD] scn:2 hdl:27173
lock_user:[email protected] pid:918 tid:4910 dur:0
05-19 [Link].613 918 4905 I mtkpower_client: ret_hdl:27176
05-19 [Link].613 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27176 hint:-1
pid:918 duration:0 => ret_hdl:27176
05-19 [Link].613 479 1594 I libPowerHal: [PE] scn:1 hdl:27176
lock_user:[email protected] pid:918 tid:4905 dur:0
05-19 [Link].882 918 5020 E OMXNodeInstance:
setParameter(0xe9c89004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].883 918 5020 E OMXNodeInstance:
getParameter(0xe9c89004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].887 918 1085 E MtkOmxVdecEx: [0xe9c89000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].887 918 1085 E OMXNodeInstance:
setConfig(0xe9c89004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].888 918 1085 E OMXNodeInstance:
getParameter(0xe9c89004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].890 918 1085 E OMXNodeInstance:
getConfig(0xe9c89004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].893 918 1085 E OMXNodeInstance:
getConfig(0xe9c89004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].946 918 4972 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c75810
05-19 [Link].946 918 4972 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].946 918 4972 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].947 918 4972 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].947 918 4972 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40083
05-19 [Link].947 918 4972 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf28c000
05-19 [Link].947 918 4972 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].956 918 4980 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4980
05-19 [Link].957 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27182 hint:-1
pid:918 duration:0 => ret_hdl:27182
05-19 [Link].957 479 1594 I libPowerHal: [PE] scn:0 hdl:27182
lock_user:[email protected] pid:918 tid:4980 dur:0
05-19 [Link].958 918 4980 I mtkpower_client: ret_hdl:27182
05-19 [Link].974 918 4972 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].974 918 4972 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].974 918 4972 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].974 918 4972 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].974 918 4972 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].078 918 4896 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].087 918 4896 I mtkpower_client: perf_lock_rel, hdl:27176,
tid:4896
05-19 [Link].088 479 1594 I libPowerHal: [PD] scn:1 hdl:27176
lock_user:[email protected] pid:918 tid:4905 dur:0
05-19 [Link].088 918 4896 I mtkpower_client: perf_lock_rel, hdl:27173,
tid:4896
05-19 [Link].254 918 4979 I mtkpower_client: perf_lock_rel, hdl:27182,
tid:4979
05-19 [Link].254 918 4979 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4979
05-19 [Link].255 479 1594 I libPowerHal: [PD] scn:0 hdl:27182
lock_user:[email protected] pid:918 tid:4980 dur:0
05-19 [Link].257 918 4979 I mtkpower_client: ret_hdl:27183
05-19 [Link].257 918 4979 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:4979
05-19 [Link].259 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27183 hint:-1
pid:918 duration:0 => ret_hdl:27183
05-19 [Link].259 479 1594 I libPowerHal: [PE] scn:1 hdl:27183
lock_user:[email protected] pid:918 tid:4979 dur:0
05-19 [Link].260 918 4979 I mtkpower_client: ret_hdl:27184
05-19 [Link].260 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27184 hint:-1
pid:918 duration:0 => ret_hdl:27184
05-19 [Link].260 479 1594 I libPowerHal: [PE] scn:0 hdl:27184
lock_user:[email protected] pid:918 tid:4979 dur:0
05-19 [Link].750 918 1065 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].751 918 1065 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].756 918 1065 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].756 918 1065 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].757 918 1065 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].757 918 1065 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].757 918 1065 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].806 918 5028 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].806 918 5028 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].806 918 5028 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].807 918 5028 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].808 918 5028 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 22561
05-19 [Link].808 918 5028 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].808 918 5028 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].819 918 5034 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5034
05-19 [Link].820 918 5034 I mtkpower_client: ret_hdl:27190
05-19 [Link].820 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27190 hint:-1
pid:918 duration:0 => ret_hdl:27190
05-19 [Link].821 479 1594 I libPowerHal: [PE] scn:2 hdl:27190
lock_user:[email protected] pid:918 tid:5034 dur:0
05-19 [Link].846 918 5028 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].846 918 5028 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].846 918 5028 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].846 918 5028 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].846 918 5028 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].912 918 4971 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].929 918 4971 I mtkpower_client: perf_lock_rel, hdl:27184,
tid:4971
05-19 [Link].929 918 4971 I mtkpower_client: perf_lock_rel, hdl:27183,
tid:4971
05-19 [Link].929 918 4971 I mtkpower_client: perf_lock_rel, hdl:27182,
tid:4971
05-19 [Link].929 479 1594 I libPowerHal: [PD] scn:0 hdl:27184
lock_user:[email protected] pid:918 tid:4979 dur:0
05-19 [Link].930 479 1594 I libPowerHal: [PD] scn:1 hdl:27183
lock_user:[email protected] pid:918 tid:4979 dur:0
05-19 [Link].103 918 5032 I mtkpower_client: perf_lock_rel, hdl:27190,
tid:5032
05-19 [Link].103 918 5032 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5032
05-19 [Link].104 479 1594 I libPowerHal: [PD] scn:2 hdl:27190
lock_user:[email protected] pid:918 tid:5034 dur:0
05-19 [Link].106 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27191 hint:-1
pid:918 duration:0 => ret_hdl:27191
05-19 [Link].106 479 1594 I libPowerHal: [PE] scn:0 hdl:27191
lock_user:[email protected] pid:918 tid:5032 dur:0
05-19 [Link].106 918 5032 I mtkpower_client: ret_hdl:27191
05-19 [Link].106 918 5032 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5032
05-19 [Link].107 918 5032 I mtkpower_client: ret_hdl:27192
05-19 [Link].107 918 5032 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5032
05-19 [Link].108 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27192 hint:-1
pid:918 duration:0 => ret_hdl:27192
05-19 [Link].108 479 1594 I libPowerHal: [PE] scn:1 hdl:27192
lock_user:[email protected] pid:918 tid:5032 dur:0
05-19 [Link].109 918 5032 I mtkpower_client: ret_hdl:27193
05-19 [Link].109 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27193 hint:-1
pid:918 duration:0 => ret_hdl:27193
05-19 [Link].109 479 1594 I libPowerHal: [PE] scn:2 hdl:27193
lock_user:[email protected] pid:918 tid:5032 dur:0
05-19 [Link].145 918 5032 I mtkpower_client: perf_lock_rel, hdl:27193,
tid:5032
05-19 [Link].146 479 1594 I libPowerHal: [PD] scn:2 hdl:27193
lock_user:[email protected] pid:918 tid:5032 dur:0
05-19 [Link].200 918 5032 I mtkpower_client: perf_lock_rel, hdl:27192,
tid:5032
05-19 [Link].201 479 1594 I libPowerHal: [PD] scn:1 hdl:27192
lock_user:[email protected] pid:918 tid:5032 dur:0
05-19 [Link].012 918 32757 E OMXNodeInstance:
setParameter(0xe9c89004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].012 918 11716 E OMXNodeInstance:
getParameter(0xe9c89004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].019 918 15538 E MtkOmxVdecEx: [0xe9c89000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].020 918 15538 E OMXNodeInstance:
setConfig(0xe9c89004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].020 918 9097 E OMXNodeInstance:
getParameter(0xe9c89004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].021 918 1780 E OMXNodeInstance:
getConfig(0xe9c89004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].023 918 5058 E OMXNodeInstance:
getConfig(0xe9c89004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].173 918 5102 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c8e810
05-19 [Link].173 918 5102 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].173 918 5102 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].175 918 5102 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].175 918 5102 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40083
05-19 [Link].175 918 5102 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].175 918 5102 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].208 918 5112 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5112
05-19 [Link].209 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27199 hint:-1
pid:918 duration:0 => ret_hdl:27199
05-19 [Link].209 479 1594 I libPowerHal: [PE] scn:2 hdl:27199
lock_user:[email protected] pid:918 tid:5112 dur:0
05-19 [Link].212 918 5112 I mtkpower_client: ret_hdl:27199
05-19 [Link].233 918 5102 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].233 918 5102 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].233 918 5102 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].233 918 5102 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].233 918 5102 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].235 918 5027 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].257 918 5027 I mtkpower_client: perf_lock_rel, hdl:27193,
tid:5027
05-19 [Link].258 918 5027 I mtkpower_client: perf_lock_rel, hdl:27192,
tid:5027
05-19 [Link].258 918 5027 I mtkpower_client: perf_lock_rel, hdl:27191,
tid:5027
05-19 [Link].258 918 5027 I mtkpower_client: perf_lock_rel, hdl:27190,
tid:5027
05-19 [Link].260 479 1594 I libPowerHal: [PD] scn:0 hdl:27191
lock_user:[email protected] pid:918 tid:5032 dur:0
05-19 [Link].549 918 1065 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].550 918 15538 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].553 918 15538 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].553 918 15538 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].553 918 1065 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].553 918 1088 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].553 918 1088 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].648 918 5151 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].648 918 5151 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].648 918 5151 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].648 918 5151 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].649 918 5151 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17097
05-19 [Link].649 918 5151 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe208c000
05-19 [Link].649 918 5151 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].651 918 5160 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5160
05-19 [Link].652 918 5160 I mtkpower_client: ret_hdl:27205
05-19 [Link].653 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27205 hint:-1
pid:918 duration:0 => ret_hdl:27205
05-19 [Link].653 479 1594 I libPowerHal: [PE] scn:0 hdl:27205
lock_user:[email protected] pid:918 tid:5160 dur:0
05-19 [Link].666 918 5151 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].666 918 5151 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].666 918 5151 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].666 918 5151 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].666 918 5151 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].705 918 5111 I mtkpower_client: perf_lock_rel, hdl:27199,
tid:5111
05-19 [Link].705 918 5111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5111
05-19 [Link].706 479 1594 I libPowerHal: [PD] scn:2 hdl:27199
lock_user:[email protected] pid:918 tid:5112 dur:0
05-19 [Link].707 918 5111 I mtkpower_client: ret_hdl:27206
05-19 [Link].707 918 5111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5111
05-19 [Link].707 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27206 hint:-1
pid:918 duration:0 => ret_hdl:27206
05-19 [Link].707 479 1594 I libPowerHal: [PE] scn:1 hdl:27206
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].708 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27207 hint:-1
pid:918 duration:0 => ret_hdl:27207
05-19 [Link].708 479 1594 I libPowerHal: [PE] scn:2 hdl:27207
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].709 918 5111 I mtkpower_client: ret_hdl:27207
05-19 [Link].709 918 5111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5111
05-19 [Link].709 918 5111 I mtkpower_client: ret_hdl:27208
05-19 [Link].710 918 5111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5111
05-19 [Link].710 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27208 hint:-1
pid:918 duration:0 => ret_hdl:27208
05-19 [Link].710 479 1594 I libPowerHal: [PE] scn:3 hdl:27208
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].711 918 5111 I mtkpower_client: ret_hdl:27209
05-19 [Link].711 918 5111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5111
05-19 [Link].713 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27209 hint:-1
pid:918 duration:0 => ret_hdl:27209
05-19 [Link].713 479 1594 I libPowerHal: [PE] scn:5 hdl:27209
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].715 918 5111 I mtkpower_client: ret_hdl:27210
05-19 [Link].715 918 5111 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5111
05-19 [Link].716 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27210 hint:-1
pid:918 duration:0 => ret_hdl:27210
05-19 [Link].716 479 1594 I libPowerHal: [PE] scn:6 hdl:27210
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].717 918 5111 I mtkpower_client: ret_hdl:27211
05-19 [Link].718 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27211 hint:-1
pid:918 duration:0 => ret_hdl:27211
05-19 [Link].718 479 1594 I libPowerHal: [PE] scn:7 hdl:27211
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].854 918 5101 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].871 918 5101 I mtkpower_client: perf_lock_rel, hdl:27211,
tid:5101
05-19 [Link].871 918 5101 I mtkpower_client: perf_lock_rel, hdl:27210,
tid:5101
05-19 [Link].871 918 5101 I mtkpower_client: perf_lock_rel, hdl:27209,
tid:5101
05-19 [Link].872 918 5101 I mtkpower_client: perf_lock_rel, hdl:27208,
tid:5101
05-19 [Link].872 479 1594 I libPowerHal: [PD] scn:7 hdl:27211
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].872 918 5101 I mtkpower_client: perf_lock_rel, hdl:27207,
tid:5101
05-19 [Link].872 918 5101 I mtkpower_client: perf_lock_rel, hdl:27206,
tid:5101
05-19 [Link].872 918 5101 I mtkpower_client: perf_lock_rel, hdl:27199,
tid:5101
05-19 [Link].874 479 1594 I libPowerHal: [PD] scn:6 hdl:27210
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].876 479 1594 I libPowerHal: [PD] scn:5 hdl:27209
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].877 479 1594 I libPowerHal: [PD] scn:3 hdl:27208
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].878 479 1594 I libPowerHal: [PD] scn:2 hdl:27207
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].880 479 1594 I libPowerHal: [PD] scn:1 hdl:27206
lock_user:[email protected] pid:918 tid:5111 dur:0
05-19 [Link].886 918 5159 I mtkpower_client: perf_lock_rel, hdl:27205,
tid:5159
05-19 [Link].886 918 5159 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5159
05-19 [Link].891 479 1594 I libPowerHal: [PD] scn:0 hdl:27205
lock_user:[email protected] pid:918 tid:5160 dur:0
05-19 [Link].892 918 5159 I mtkpower_client: ret_hdl:27212
05-19 [Link].892 918 5159 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5159
05-19 [Link].892 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27212 hint:-1
pid:918 duration:0 => ret_hdl:27212
05-19 [Link].892 479 1594 I libPowerHal: [PE] scn:1 hdl:27212
lock_user:[email protected] pid:918 tid:5159 dur:0
05-19 [Link].892 918 5159 I mtkpower_client: ret_hdl:27213
05-19 [Link].893 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27213 hint:-1
pid:918 duration:0 => ret_hdl:27213
05-19 [Link].893 479 1594 I libPowerHal: [PE] scn:0 hdl:27213
lock_user:[email protected] pid:918 tid:5159 dur:0
05-19 [Link].050 918 5159 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5159
05-19 [Link].050 918 5159 I mtkpower_client: ret_hdl:27214
05-19 [Link].051 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27214 hint:-1
pid:918 duration:0 => ret_hdl:27214
05-19 [Link].051 479 1594 I libPowerHal: [PE] scn:2 hdl:27214
lock_user:[email protected] pid:918 tid:5159 dur:0
05-19 [Link].098 918 5159 I mtkpower_client: perf_lock_rel, hdl:27214,
tid:5159
05-19 [Link].099 479 1594 I libPowerHal: [PD] scn:2 hdl:27214
lock_user:[email protected] pid:918 tid:5159 dur:0
05-19 [Link].216 918 5159 I mtkpower_client: perf_lock_rel, hdl:27213,
tid:5159
05-19 [Link].217 479 1594 I libPowerHal: [PD] scn:0 hdl:27213
lock_user:[email protected] pid:918 tid:5159 dur:0
05-19 [Link].872 918 15538 E OMXNodeInstance:
setParameter(0xe9c89004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].873 918 15538 E OMXNodeInstance:
getParameter(0xe9c89004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].877 918 5020 E MtkOmxVdecEx: [0xe9c89000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].877 918 5020 E OMXNodeInstance:
setConfig(0xe9c89004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].878 918 15538 E OMXNodeInstance:
getParameter(0xe9c89004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].879 918 5020 E OMXNodeInstance:
getConfig(0xe9c89004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].881 918 1085 E OMXNodeInstance:
getConfig(0xe9c89004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].947 918 5225 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c8e810
05-19 [Link].947 918 5225 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].947 918 5225 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].952 918 5225 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].953 918 5225 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40083
05-19 [Link].953 918 5225 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].953 918 5225 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].980 918 5231 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5231
05-19 [Link].981 918 5231 I mtkpower_client: ret_hdl:27225
05-19 [Link].981 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27225 hint:-1
pid:918 duration:0 => ret_hdl:27225
05-19 [Link].981 479 1594 I libPowerHal: [PE] scn:0 hdl:27225
lock_user:[email protected] pid:918 tid:5231 dur:0
05-19 [Link].032 918 5225 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].032 918 5225 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].033 918 5225 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].033 918 5225 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].033 918 5225 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].195 918 5150 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].215 918 5150 I mtkpower_client: perf_lock_rel, hdl:27214,
tid:5150
05-19 [Link].215 918 5150 I mtkpower_client: perf_lock_rel, hdl:27213,
tid:5150
05-19 [Link].215 918 5150 I mtkpower_client: perf_lock_rel, hdl:27212,
tid:5150
05-19 [Link].215 918 5150 I mtkpower_client: perf_lock_rel, hdl:27205,
tid:5150
05-19 [Link].218 479 1594 I libPowerHal: [PD] scn:1 hdl:27212
lock_user:[email protected] pid:918 tid:5159 dur:0
05-19 [Link].397 918 1960 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].397 918 1085 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].400 918 1960 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].400 918 1960 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].401 918 1960 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].401 918 32761 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].402 918 1960 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].411 918 5230 I mtkpower_client: perf_lock_rel, hdl:27225,
tid:5230
05-19 [Link].411 918 5230 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5230
05-19 [Link].412 479 1594 I libPowerHal: [PD] scn:0 hdl:27225
lock_user:[email protected] pid:918 tid:5231 dur:0
05-19 [Link].413 918 5230 I mtkpower_client: ret_hdl:27231
05-19 [Link].414 918 5230 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5230
05-19 [Link].414 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27231 hint:-1
pid:918 duration:0 => ret_hdl:27231
05-19 [Link].414 479 1594 I libPowerHal: [PE] scn:0 hdl:27231
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].414 918 5230 I mtkpower_client: ret_hdl:27232
05-19 [Link].414 918 5230 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5230
05-19 [Link].414 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27232 hint:-1
pid:918 duration:0 => ret_hdl:27232
05-19 [Link].414 479 1594 I libPowerHal: [PE] scn:2 hdl:27232
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].415 918 5230 I mtkpower_client: ret_hdl:27233
05-19 [Link].415 918 5230 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5230
05-19 [Link].415 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27233 hint:-1
pid:918 duration:0 => ret_hdl:27233
05-19 [Link].415 479 1594 I libPowerHal: [PE] scn:4 hdl:27233
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].417 918 5230 I mtkpower_client: ret_hdl:27234
05-19 [Link].417 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27234 hint:-1
pid:918 duration:0 => ret_hdl:27234
05-19 [Link].417 479 1594 I libPowerHal: [PE] scn:5 hdl:27234
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].444 918 5274 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].444 918 5274 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].444 918 5274 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].445 918 5274 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].445 918 5274 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17097
05-19 [Link].445 918 5274 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe172a000
05-19 [Link].445 918 5274 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].452 918 5281 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5281
05-19 [Link].452 918 5281 I mtkpower_client: ret_hdl:27235
05-19 [Link].453 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27235 hint:-1
pid:918 duration:0 => ret_hdl:27235
05-19 [Link].453 479 1594 I libPowerHal: [PE] scn:6 hdl:27235
lock_user:[email protected] pid:918 tid:5281 dur:0
05-19 [Link].463 918 5274 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].463 918 5274 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].463 918 5274 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].463 918 5274 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].463 918 5274 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].679 918 5224 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].694 918 5224 I mtkpower_client: perf_lock_rel, hdl:27234,
tid:5224
05-19 [Link].694 918 5224 I mtkpower_client: perf_lock_rel, hdl:27233,
tid:5224
05-19 [Link].694 918 5224 I mtkpower_client: perf_lock_rel, hdl:27232,
tid:5224
05-19 [Link].694 918 5224 I mtkpower_client: perf_lock_rel, hdl:27231,
tid:5224
05-19 [Link].694 918 5224 I mtkpower_client: perf_lock_rel, hdl:27225,
tid:5224
05-19 [Link].695 479 1594 I libPowerHal: [PD] scn:5 hdl:27234
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].697 479 1594 I libPowerHal: [PD] scn:4 hdl:27233
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].698 479 1594 I libPowerHal: [PD] scn:2 hdl:27232
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].701 479 1594 I libPowerHal: [PD] scn:0 hdl:27231
lock_user:[email protected] pid:918 tid:5230 dur:0
05-19 [Link].790 918 5280 I mtkpower_client: perf_lock_rel, hdl:27235,
tid:5280
05-19 [Link].791 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].791 479 1594 I libPowerHal: [PD] scn:6 hdl:27235
lock_user:[email protected] pid:918 tid:5281 dur:0
05-19 [Link].792 918 5280 I mtkpower_client: ret_hdl:27236
05-19 [Link].792 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].792 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27236 hint:-1
pid:918 duration:0 => ret_hdl:27236
05-19 [Link].792 479 1594 I libPowerHal: [PE] scn:0 hdl:27236
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].793 918 5280 I mtkpower_client: ret_hdl:27237
05-19 [Link].793 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27237 hint:-1
pid:918 duration:0 => ret_hdl:27237
05-19 [Link].793 479 1594 I libPowerHal: [PE] scn:2 hdl:27237
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].977 918 5280 I mtkpower_client: perf_lock_rel, hdl:27237,
tid:5280
05-19 [Link].978 479 1594 I libPowerHal: [PD] scn:2 hdl:27237
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].787 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].788 918 5280 I mtkpower_client: ret_hdl:27238
05-19 [Link].788 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].789 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27238 hint:-1
pid:918 duration:0 => ret_hdl:27238
05-19 [Link].789 479 1594 I libPowerHal: [PE] scn:1 hdl:27238
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].792 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27239 hint:-1
pid:918 duration:0 => ret_hdl:27239
05-19 [Link].792 479 1594 I libPowerHal: [PE] scn:2 hdl:27239
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].793 918 5280 I mtkpower_client: ret_hdl:27239
05-19 [Link].793 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].796 918 5280 I mtkpower_client: ret_hdl:27240
05-19 [Link].796 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].796 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27240 hint:-1
pid:918 duration:0 => ret_hdl:27240
05-19 [Link].796 479 1594 I libPowerHal: [PE] scn:3 hdl:27240
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].798 918 5280 I mtkpower_client: ret_hdl:27241
05-19 [Link].798 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].798 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27241 hint:-1
pid:918 duration:0 => ret_hdl:27241
05-19 [Link].798 479 1594 I libPowerHal: [PE] scn:4 hdl:27241
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].799 918 5280 I mtkpower_client: ret_hdl:27242
05-19 [Link].799 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].799 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27242 hint:-1
pid:918 duration:0 => ret_hdl:27242
05-19 [Link].800 479 1594 I libPowerHal: [PE] scn:5 hdl:27242
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].801 918 5280 I mtkpower_client: ret_hdl:27243
05-19 [Link].801 918 5280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5280
05-19 [Link].802 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27243 hint:-1
pid:918 duration:0 => ret_hdl:27243
05-19 [Link].802 479 1594 I libPowerHal: [PE] scn:6 hdl:27243
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].803 918 5280 I mtkpower_client: ret_hdl:27244
05-19 [Link].803 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27244 hint:-1
pid:918 duration:0 => ret_hdl:27244
05-19 [Link].803 479 1594 I libPowerHal: [PE] scn:7 hdl:27244
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].316 918 5280 I mtkpower_client: perf_lock_rel, hdl:27244,
tid:5280
05-19 [Link].316 918 5280 I mtkpower_client: perf_lock_rel, hdl:27243,
tid:5280
05-19 [Link].316 918 5280 I mtkpower_client: perf_lock_rel, hdl:27242,
tid:5280
05-19 [Link].316 918 5280 I mtkpower_client: perf_lock_rel, hdl:27241,
tid:5280
05-19 [Link].316 918 5280 I mtkpower_client: perf_lock_rel, hdl:27240,
tid:5280
05-19 [Link].317 479 1594 I libPowerHal: [PD] scn:7 hdl:27244
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].317 479 1594 I libPowerHal: [PD] scn:6 hdl:27243
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].319 479 1594 I libPowerHal: [PD] scn:5 hdl:27242
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].321 479 1594 I libPowerHal: [PD] scn:4 hdl:27241
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].323 479 1594 I libPowerHal: [PD] scn:3 hdl:27240
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].353 918 5280 I mtkpower_client: perf_lock_rel, hdl:27239,
tid:5280
05-19 [Link].353 918 5280 I mtkpower_client: perf_lock_rel, hdl:27238,
tid:5280
05-19 [Link].355 479 1594 I libPowerHal: [PD] scn:2 hdl:27239
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].357 479 1594 I libPowerHal: [PD] scn:1 hdl:27238
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].858 918 1960 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].858 918 1960 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].862 918 1960 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].862 918 1960 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].863 918 1960 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].864 918 5724 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].865 918 5724 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].910 918 5327 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c8e810
05-19 [Link].910 918 5327 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].910 918 5327 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].911 918 5327 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].912 918 5327 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40083
05-19 [Link].912 918 5327 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].912 918 5327 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].927 918 5332 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5332
05-19 [Link].928 918 5332 I mtkpower_client: ret_hdl:27250
05-19 [Link].929 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27250 hint:-1
pid:918 duration:0 => ret_hdl:27250
05-19 [Link].929 479 1594 I libPowerHal: [PE] scn:2 hdl:27250
lock_user:[email protected] pid:918 tid:5332 dur:0
05-19 [Link].945 918 5327 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].946 918 5327 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].946 918 5327 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].946 918 5327 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].947 918 5327 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].164 918 5273 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].216 918 5273 I mtkpower_client: perf_lock_rel, hdl:27244,
tid:5273
05-19 [Link].217 918 5273 I mtkpower_client: perf_lock_rel, hdl:27243,
tid:5273
05-19 [Link].219 918 5273 I mtkpower_client: perf_lock_rel, hdl:27242,
tid:5273
05-19 [Link].220 918 5273 I mtkpower_client: perf_lock_rel, hdl:27241,
tid:5273
05-19 [Link].233 918 5273 I mtkpower_client: perf_lock_rel, hdl:27240,
tid:5273
05-19 [Link].233 918 5273 I mtkpower_client: perf_lock_rel, hdl:27239,
tid:5273
05-19 [Link].234 918 5273 I mtkpower_client: perf_lock_rel, hdl:27238,
tid:5273
05-19 [Link].234 918 5273 I mtkpower_client: perf_lock_rel, hdl:27236,
tid:5273
05-19 [Link].234 918 5273 I mtkpower_client: perf_lock_rel, hdl:27235,
tid:5273
05-19 [Link].260 479 1594 I libPowerHal: [PD] scn:0 hdl:27236
lock_user:[email protected] pid:918 tid:5280 dur:0
05-19 [Link].349 918 5331 I mtkpower_client: perf_lock_rel, hdl:27250,
tid:5331
05-19 [Link].349 918 5331 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5331
05-19 [Link].349 479 1594 I libPowerHal: [PD] scn:2 hdl:27250
lock_user:[email protected] pid:918 tid:5332 dur:0
05-19 [Link].351 918 5331 I mtkpower_client: ret_hdl:27252
05-19 [Link].351 918 5331 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5331
05-19 [Link].352 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27252 hint:-1
pid:918 duration:0 => ret_hdl:27252
05-19 [Link].352 479 1594 I libPowerHal: [PE] scn:0 hdl:27252
lock_user:[email protected] pid:918 tid:5331 dur:0
05-19 [Link].353 918 5331 I mtkpower_client: ret_hdl:27253
05-19 [Link].353 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27253 hint:-1
pid:918 duration:0 => ret_hdl:27253
05-19 [Link].353 479 1594 I libPowerHal: [PE] scn:1 hdl:27253
lock_user:[email protected] pid:918 tid:5331 dur:0
05-19 [Link].354 918 5331 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5331
05-19 [Link].355 918 5331 I mtkpower_client: ret_hdl:27254
05-19 [Link].355 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27254 hint:-1
pid:918 duration:0 => ret_hdl:27254
05-19 [Link].355 479 1594 I libPowerHal: [PE] scn:2 hdl:27254
lock_user:[email protected] pid:918 tid:5331 dur:0
05-19 [Link].522 918 5331 I mtkpower_client: perf_lock_rel, hdl:27254,
tid:5331
05-19 [Link].528 479 1594 I libPowerHal: [PD] scn:2 hdl:27254
lock_user:[email protected] pid:918 tid:5331 dur:0
05-19 [Link].550 918 15538 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].551 918 15538 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].557 918 15538 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].557 918 15538 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].557 918 15538 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].557 918 15538 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].558 918 15538 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].591 918 5378 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].592 918 5378 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].592 918 5378 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].593 918 5378 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].593 918 5378 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17097
05-19 [Link].593 918 5378 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0d8c000
05-19 [Link].595 918 5378 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].597 918 5384 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5384
05-19 [Link].598 918 5384 I mtkpower_client: ret_hdl:27259
05-19 [Link].600 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27259 hint:-1
pid:918 duration:0 => ret_hdl:27259
05-19 [Link].600 479 1594 I libPowerHal: [PE] scn:2 hdl:27259
lock_user:[email protected] pid:918 tid:5384 dur:0
05-19 [Link].615 918 5378 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].615 918 5378 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].615 918 5378 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].615 918 5378 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].615 918 5378 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].747 918 5326 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].776 918 5326 I mtkpower_client: perf_lock_rel, hdl:27254,
tid:5326
05-19 [Link].776 918 5326 I mtkpower_client: perf_lock_rel, hdl:27253,
tid:5326
05-19 [Link].776 918 5326 I mtkpower_client: perf_lock_rel, hdl:27252,
tid:5326
05-19 [Link].776 918 5326 I mtkpower_client: perf_lock_rel, hdl:27250,
tid:5326
05-19 [Link].779 479 1594 I libPowerHal: [PD] scn:1 hdl:27253
lock_user:[email protected] pid:918 tid:5331 dur:0
05-19 [Link].781 479 1594 I libPowerHal: [PD] scn:0 hdl:27252
lock_user:[email protected] pid:918 tid:5331 dur:0
05-19 [Link].826 918 5383 I mtkpower_client: perf_lock_rel, hdl:27259,
tid:5383
05-19 [Link].826 918 5383 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5383
05-19 [Link].826 479 1594 I libPowerHal: [PD] scn:2 hdl:27259
lock_user:[email protected] pid:918 tid:5384 dur:0
05-19 [Link].827 918 5383 I mtkpower_client: ret_hdl:27260
05-19 [Link].827 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27260 hint:-1
pid:918 duration:0 => ret_hdl:27260
05-19 [Link].827 479 1594 I libPowerHal: [PE] scn:0 hdl:27260
lock_user:[email protected] pid:918 tid:5383 dur:0
05-19 [Link].426 918 9097 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].427 918 9097 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].430 918 9097 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].430 918 9097 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].431 918 9097 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].431 918 1065 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].432 918 1065 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].515 918 5421 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c8e810
05-19 [Link].515 918 5421 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].515 918 5421 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].516 918 5421 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].516 918 5421 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40083
05-19 [Link].516 918 5421 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].516 918 5421 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].521 918 5428 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5428
05-19 [Link].522 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27265 hint:-1
pid:918 duration:0 => ret_hdl:27265
05-19 [Link].523 479 1594 I libPowerHal: [PE] scn:2 hdl:27265
lock_user:[email protected] pid:918 tid:5428 dur:0
05-19 [Link].523 918 5428 I mtkpower_client: ret_hdl:27265
05-19 [Link].555 918 5421 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].555 918 5421 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].555 918 5421 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].555 918 5421 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].555 918 5421 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].706 918 5377 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].720 918 5377 I mtkpower_client: perf_lock_rel, hdl:27260,
tid:5377
05-19 [Link].722 918 5377 I mtkpower_client: perf_lock_rel, hdl:27259,
tid:5377
05-19 [Link].722 479 1594 I libPowerHal: [PD] scn:0 hdl:27260
lock_user:[email protected] pid:918 tid:5383 dur:0
05-19 [Link].806 918 5427 I mtkpower_client: perf_lock_rel, hdl:27265,
tid:5427
05-19 [Link].807 918 5427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5427
05-19 [Link].807 479 1594 I libPowerHal: [PD] scn:2 hdl:27265
lock_user:[email protected] pid:918 tid:5428 dur:0
05-19 [Link].808 918 5427 I mtkpower_client: ret_hdl:27266
05-19 [Link].808 918 5427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5427
05-19 [Link].808 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27266 hint:-1
pid:918 duration:0 => ret_hdl:27266
05-19 [Link].808 479 1594 I libPowerHal: [PE] scn:0 hdl:27266
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].809 918 5427 I mtkpower_client: ret_hdl:27267
05-19 [Link].809 918 5427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5427
05-19 [Link].809 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27267 hint:-1
pid:918 duration:0 => ret_hdl:27267
05-19 [Link].809 479 1594 I libPowerHal: [PE] scn:1 hdl:27267
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].810 918 5427 I mtkpower_client: ret_hdl:27268
05-19 [Link].810 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27268 hint:-1
pid:918 duration:0 => ret_hdl:27268
05-19 [Link].810 479 1594 I libPowerHal: [PE] scn:2 hdl:27268
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].001 918 13399 E OMXNodeInstance:
setParameter(0xe9fb3804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].001 918 13399 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].004 918 13399 E MtkOmxVdecEx: [0xe9fb3800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].005 918 13399 E OMXNodeInstance:
setConfig(0xe9fb3804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].005 918 13399 E OMXNodeInstance:
getParameter(0xe9fb3804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].006 918 13399 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].006 918 13399 E OMXNodeInstance:
getConfig(0xe9fb3804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].048 918 5496 E VDO_LOG : GetDecoderAPI hWrapper 0xea1e0810
05-19 [Link].048 918 5496 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].048 918 5496 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].049 918 5496 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].049 918 5496 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17097
05-19 [Link].049 918 5496 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0806000
05-19 [Link].049 918 5496 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].052 918 5504 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5504
05-19 [Link].052 918 5504 I mtkpower_client: ret_hdl:27274
05-19 [Link].053 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27274 hint:-1
pid:918 duration:0 => ret_hdl:27274
05-19 [Link].053 479 1594 I libPowerHal: [PE] scn:5 hdl:27274
lock_user:[email protected] pid:918 tid:5504 dur:0
05-19 [Link].093 918 5496 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].093 918 5496 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].093 918 5496 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].093 918 5496 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].093 918 5496 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].218 918 5427 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5427
05-19 [Link].219 918 5427 I mtkpower_client: ret_hdl:27275
05-19 [Link].220 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27275 hint:-1
pid:918 duration:0 => ret_hdl:27275
05-19 [Link].220 479 1594 I libPowerHal: [PE] scn:4 hdl:27275
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].301 918 5503 I mtkpower_client: perf_lock_rel, hdl:27274,
tid:5503
05-19 [Link].301 918 5503 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5503
05-19 [Link].302 479 1594 I libPowerHal: [PD] scn:5 hdl:27274
lock_user:[email protected] pid:918 tid:5504 dur:0
05-19 [Link].303 918 5503 I mtkpower_client: ret_hdl:27276
05-19 [Link].303 918 5503 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5503
05-19 [Link].304 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27276 hint:-1
pid:918 duration:0 => ret_hdl:27276
05-19 [Link].304 479 1594 I libPowerHal: [PE] scn:6 hdl:27276
lock_user:[email protected] pid:918 tid:5503 dur:0
05-19 [Link].305 918 5503 I mtkpower_client: ret_hdl:27277
05-19 [Link].305 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27277 hint:-1
pid:918 duration:0 => ret_hdl:27277
05-19 [Link].305 479 1594 I libPowerHal: [PE] scn:5 hdl:27277
lock_user:[email protected] pid:918 tid:5503 dur:0
05-19 [Link].334 918 5420 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].346 918 5420 I mtkpower_client: perf_lock_rel, hdl:27275,
tid:5420
05-19 [Link].346 918 5420 I mtkpower_client: perf_lock_rel, hdl:27268,
tid:5420
05-19 [Link].347 918 5420 I mtkpower_client: perf_lock_rel, hdl:27267,
tid:5420
05-19 [Link].347 479 1594 I libPowerHal: [PD] scn:4 hdl:27275
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].347 918 5420 I mtkpower_client: perf_lock_rel, hdl:27266,
tid:5420
05-19 [Link].347 918 5420 I mtkpower_client: perf_lock_rel, hdl:27265,
tid:5420
05-19 [Link].348 479 1594 I libPowerHal: [PD] scn:2 hdl:27268
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].349 479 1594 I libPowerHal: [PD] scn:1 hdl:27267
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].351 479 1594 I libPowerHal: [PD] scn:0 hdl:27266
lock_user:[email protected] pid:918 tid:5427 dur:0
05-19 [Link].387 918 5503 I mtkpower_client: perf_lock_rel, hdl:27277,
tid:5503
05-19 [Link].387 479 1594 I libPowerHal: [PD] scn:5 hdl:27277
lock_user:[email protected] pid:918 tid:5503 dur:0
05-19 [Link].210 3148 23918 E WakeLock: GCM_HB_ALARM release without a matched
acquire!
05-19 [Link].568 918 1085 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].569 918 11716 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].574 918 1085 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].575 918 1085 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].576 918 9097 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].576 918 1085 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].577 918 15538 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].641 918 5617 E VDO_LOG : GetDecoderAPI hWrapper 0xe9dc4810
05-19 [Link].641 918 5617 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].641 918 5617 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].642 918 5617 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].642 918 5617 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 40083
05-19 [Link].642 918 5617 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].642 918 5617 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].649 918 5625 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5625
05-19 [Link].655 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27283 hint:-1
pid:918 duration:0 => ret_hdl:27283
05-19 [Link].656 479 1594 I libPowerHal: [PE] scn:1 hdl:27283
lock_user:[email protected] pid:918 tid:5625 dur:0
05-19 [Link].656 918 5625 I mtkpower_client: ret_hdl:27283
05-19 [Link].684 918 5617 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].684 918 5617 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].684 918 5617 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].685 918 5617 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].685 918 5617 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].894 918 5495 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].905 918 5495 I mtkpower_client: perf_lock_rel, hdl:27277,
tid:5495
05-19 [Link].905 918 5495 I mtkpower_client: perf_lock_rel, hdl:27276,
tid:5495
05-19 [Link].905 918 5495 I mtkpower_client: perf_lock_rel, hdl:27274,
tid:5495
05-19 [Link].906 479 1594 I libPowerHal: [PD] scn:6 hdl:27276
lock_user:[email protected] pid:918 tid:5503 dur:0
05-19 [Link].058 918 5622 I mtkpower_client: perf_lock_rel, hdl:27283,
tid:5622
05-19 [Link].058 918 5622 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5622
05-19 [Link].059 479 1594 I libPowerHal: [PD] scn:1 hdl:27283
lock_user:[email protected] pid:918 tid:5625 dur:0
05-19 [Link].062 918 5622 I mtkpower_client: ret_hdl:27284
05-19 [Link].062 918 5622 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5622
05-19 [Link].067 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27284 hint:-1
pid:918 duration:0 => ret_hdl:27284
05-19 [Link].067 479 1594 I libPowerHal: [PE] scn:2 hdl:27284
lock_user:[email protected] pid:918 tid:5622 dur:0
05-19 [Link].068 918 5622 I mtkpower_client: ret_hdl:27285
05-19 [Link].068 918 5622 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5622
05-19 [Link].068 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27285 hint:-1
pid:918 duration:0 => ret_hdl:27285
05-19 [Link].068 479 1594 I libPowerHal: [PE] scn:1 hdl:27285
lock_user:[email protected] pid:918 tid:5622 dur:0
05-19 [Link].069 918 5622 I mtkpower_client: ret_hdl:27286
05-19 [Link].069 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27286 hint:-1
pid:918 duration:0 => ret_hdl:27286
05-19 [Link].069 479 1594 I libPowerHal: [PE] scn:3 hdl:27286
lock_user:[email protected] pid:918 tid:5622 dur:0
05-19 [Link].119 918 5622 I mtkpower_client: perf_lock_rel, hdl:27286,
tid:5622
05-19 [Link].120 479 1594 I libPowerHal: [PD] scn:3 hdl:27286
lock_user:[email protected] pid:918 tid:5622 dur:0
05-19 [Link].218 918 5622 I mtkpower_client: perf_lock_rel, hdl:27285,
tid:5622
05-19 [Link].218 479 1594 I libPowerHal: [PD] scn:1 hdl:27285
lock_user:[email protected] pid:918 tid:5622 dur:0
05-19 [Link].951 918 5616 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].959 918 5616 I mtkpower_client: perf_lock_rel, hdl:27286,
tid:5616
05-19 [Link].959 918 5616 I mtkpower_client: perf_lock_rel, hdl:27285,
tid:5616
05-19 [Link].960 918 5616 I mtkpower_client: perf_lock_rel, hdl:27284,
tid:5616
05-19 [Link].960 918 5616 I mtkpower_client: perf_lock_rel, hdl:27283,
tid:5616
05-19 [Link].961 918 5616 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].961 479 1594 I libPowerHal: [PD] scn:2 hdl:27284
lock_user:[email protected] pid:918 tid:5622 dur:0
05-19 [Link].963 918 5616 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].963 918 5616 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].963 918 5616 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].604 918 9097 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].604 918 9097 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 9097 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].606 918 9097 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 9097 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 9097 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].606 918 9097 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].636 918 5670 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].636 918 5670 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].637 918 5670 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].637 918 5670 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].637 918 5670 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].638 918 5670 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ed810
05-19 [Link].638 918 5670 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].638 918 5670 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].766 918 5670 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].766 918 5670 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 55534
05-19 [Link].766 918 5670 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].766 918 5670 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].772 918 5676 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5676
05-19 [Link].772 918 5676 I mtkpower_client: ret_hdl:27291
05-19 [Link].773 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27291 hint:-1
pid:918 duration:0 => ret_hdl:27291
05-19 [Link].773 479 1594 I libPowerHal: [PE] scn:0 hdl:27291
lock_user:[email protected] pid:918 tid:5676 dur:0
05-19 [Link].786 918 5670 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].786 918 5670 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].786 918 5670 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].786 918 5670 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].786 918 5670 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].135 918 5675 I mtkpower_client: perf_lock_rel, hdl:27291,
tid:5675
05-19 [Link].135 918 5675 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5675
05-19 [Link].136 479 1594 I libPowerHal: [PD] scn:0 hdl:27291
lock_user:[email protected] pid:918 tid:5676 dur:0
05-19 [Link].137 918 5675 I mtkpower_client: ret_hdl:27295
05-19 [Link].137 918 5675 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5675
05-19 [Link].138 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27295 hint:-1
pid:918 duration:0 => ret_hdl:27295
05-19 [Link].138 479 1594 I libPowerHal: [PE] scn:1 hdl:27295
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].139 918 5675 I mtkpower_client: ret_hdl:27296
05-19 [Link].139 918 5675 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5675
05-19 [Link].140 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27296 hint:-1
pid:918 duration:0 => ret_hdl:27296
05-19 [Link].140 479 1594 I libPowerHal: [PE] scn:0 hdl:27296
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].140 918 5675 I mtkpower_client: ret_hdl:27297
05-19 [Link].140 918 5675 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5675
05-19 [Link].140 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27297 hint:-1
pid:918 duration:0 => ret_hdl:27297
05-19 [Link].140 479 1594 I libPowerHal: [PE] scn:2 hdl:27297
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].141 918 5675 I mtkpower_client: ret_hdl:27298
05-19 [Link].141 918 5675 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5675
05-19 [Link].141 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27298 hint:-1
pid:918 duration:0 => ret_hdl:27298
05-19 [Link].141 479 1594 I libPowerHal: [PE] scn:3 hdl:27298
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].142 918 5675 I mtkpower_client: ret_hdl:27299
05-19 [Link].142 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27299 hint:-1
pid:918 duration:0 => ret_hdl:27299
05-19 [Link].142 479 1594 I libPowerHal: [PE] scn:4 hdl:27299
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].232 918 5675 I mtkpower_client: perf_lock_rel, hdl:27299,
tid:5675
05-19 [Link].233 479 1594 I libPowerHal: [PD] scn:4 hdl:27299
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].372 918 9097 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].372 918 15538 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].377 918 13399 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].377 918 13399 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].378 918 11716 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].378 918 13399 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].379 918 5020 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].436 918 5675 I mtkpower_client: perf_lock_rel, hdl:27298,
tid:5675
05-19 [Link].437 479 1594 I libPowerHal: [PD] scn:3 hdl:27298
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].444 918 5718 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c75810
05-19 [Link].444 918 5718 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].444 918 5718 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].445 918 5718 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].445 918 5718 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 56340
05-19 [Link].445 918 5718 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xddaa6000
05-19 [Link].446 918 5718 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].460 918 5723 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5723
05-19 [Link].460 918 5723 I mtkpower_client: ret_hdl:27305
05-19 [Link].461 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27305 hint:-1
pid:918 duration:0 => ret_hdl:27305
05-19 [Link].461 479 1594 I libPowerHal: [PE] scn:3 hdl:27305
lock_user:[email protected] pid:918 tid:5723 dur:0
05-19 [Link].462 918 5718 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].462 918 5718 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].462 918 5718 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].462 918 5718 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].462 918 5718 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].671 918 5669 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].701 918 5669 I mtkpower_client: perf_lock_rel, hdl:27299,
tid:5669
05-19 [Link].701 918 5669 I mtkpower_client: perf_lock_rel, hdl:27298,
tid:5669
05-19 [Link].701 918 5669 I mtkpower_client: perf_lock_rel, hdl:27297,
tid:5669
05-19 [Link].701 918 5669 I mtkpower_client: perf_lock_rel, hdl:27296,
tid:5669
05-19 [Link].701 918 5669 I mtkpower_client: perf_lock_rel, hdl:27295,
tid:5669
05-19 [Link].701 918 5669 I mtkpower_client: perf_lock_rel, hdl:27291,
tid:5669
05-19 [Link].704 479 1594 I libPowerHal: [PD] scn:2 hdl:27297
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].707 479 1594 I libPowerHal: [PD] scn:0 hdl:27296
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].708 479 1594 I libPowerHal: [PD] scn:1 hdl:27295
lock_user:[email protected] pid:918 tid:5675 dur:0
05-19 [Link].825 918 5722 I mtkpower_client: perf_lock_rel, hdl:27305,
tid:5722
05-19 [Link].825 918 5722 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5722
05-19 [Link].826 479 1594 I libPowerHal: [PD] scn:3 hdl:27305
lock_user:[email protected] pid:918 tid:5723 dur:0
05-19 [Link].826 918 5722 I mtkpower_client: ret_hdl:27306
05-19 [Link].827 918 5722 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5722
05-19 [Link].827 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27306 hint:-1
pid:918 duration:0 => ret_hdl:27306
05-19 [Link].827 479 1594 I libPowerHal: [PE] scn:0 hdl:27306
lock_user:[email protected] pid:918 tid:5722 dur:0
05-19 [Link].829 918 5722 I mtkpower_client: ret_hdl:27307
05-19 [Link].829 918 5722 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5722
05-19 [Link].830 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27307 hint:-1
pid:918 duration:0 => ret_hdl:27307
05-19 [Link].830 479 1594 I libPowerHal: [PE] scn:1 hdl:27307
lock_user:[email protected] pid:918 tid:5722 dur:0
05-19 [Link].831 918 5722 I mtkpower_client: ret_hdl:27308
05-19 [Link].832 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27308 hint:-1
pid:918 duration:0 => ret_hdl:27308
05-19 [Link].832 479 1594 I libPowerHal: [PE] scn:2 hdl:27308
lock_user:[email protected] pid:918 tid:5722 dur:0
05-19 [Link].920 918 5722 I mtkpower_client: perf_lock_rel, hdl:27308,
tid:5722
05-19 [Link].921 479 1594 I libPowerHal: [PD] scn:2 hdl:27308
lock_user:[email protected] pid:918 tid:5722 dur:0
05-19 [Link].133 918 5722 I mtkpower_client: perf_lock_rel, hdl:27307,
tid:5722
05-19 [Link].134 479 1594 I libPowerHal: [PD] scn:1 hdl:27307
lock_user:[email protected] pid:918 tid:5722 dur:0
05-19 [Link].175 918 32761 E OMXNodeInstance:
setParameter(0xea480004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].176 918 32757 E OMXNodeInstance:
getParameter(0xea480004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].181 918 5058 E MtkOmxVdecEx: [0xea480000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].182 918 5058 E OMXNodeInstance:
setConfig(0xea480004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].182 918 1088 E OMXNodeInstance:
getParameter(0xea480004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].183 918 32757 E OMXNodeInstance:
getConfig(0xea480004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].184 918 1088 E OMXNodeInstance:
getConfig(0xea480004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].292 918 5768 E VDO_LOG : GetDecoderAPI hWrapper 0xea1b1810
05-19 [Link].292 918 5768 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].292 918 5768 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].293 918 5768 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].294 918 5768 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 78016
05-19 [Link].294 918 5768 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].294 918 5768 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].313 918 5775 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5775
05-19 [Link].314 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27314 hint:-1
pid:918 duration:0 => ret_hdl:27314
05-19 [Link].314 479 1594 I libPowerHal: [PE] scn:1 hdl:27314
lock_user:[email protected] pid:918 tid:5775 dur:0
05-19 [Link].315 918 5775 I mtkpower_client: ret_hdl:27314
05-19 [Link].326 918 5768 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].326 918 5768 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].326 918 5768 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].326 918 5768 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].326 918 5768 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].338 918 5717 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].376 918 5717 I mtkpower_client: perf_lock_rel, hdl:27308,
tid:5717
05-19 [Link].376 918 5717 I mtkpower_client: perf_lock_rel, hdl:27307,
tid:5717
05-19 [Link].376 918 5717 I mtkpower_client: perf_lock_rel, hdl:27306,
tid:5717
05-19 [Link].377 918 5717 I mtkpower_client: perf_lock_rel, hdl:27305,
tid:5717
05-19 [Link].378 479 1594 I libPowerHal: [PD] scn:0 hdl:27306
lock_user:[email protected] pid:918 tid:5722 dur:0
05-19 [Link].634 918 5774 I mtkpower_client: perf_lock_rel, hdl:27314,
tid:5774
05-19 [Link].634 918 5774 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5774
05-19 [Link].637 479 1594 I libPowerHal: [PD] scn:1 hdl:27314
lock_user:[email protected] pid:918 tid:5775 dur:0
05-19 [Link].639 918 5774 I mtkpower_client: ret_hdl:27316
05-19 [Link].639 918 5774 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5774
05-19 [Link].640 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27316 hint:-1
pid:918 duration:0 => ret_hdl:27316
05-19 [Link].640 479 1594 I libPowerHal: [PE] scn:1 hdl:27316
lock_user:[email protected] pid:918 tid:5774 dur:0
05-19 [Link].641 918 5774 I mtkpower_client: ret_hdl:27317
05-19 [Link].642 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27317 hint:-1
pid:918 duration:0 => ret_hdl:27317
05-19 [Link].642 479 1594 I libPowerHal: [PE] scn:3 hdl:27317
lock_user:[email protected] pid:918 tid:5774 dur:0
05-19 [Link].938 918 32757 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].938 918 32757 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].941 918 5774 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5774
05-19 [Link].942 918 5774 I mtkpower_client: ret_hdl:27322
05-19 [Link].942 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27322 hint:-1
pid:918 duration:0 => ret_hdl:27322
05-19 [Link].942 918 32757 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].942 479 1594 I libPowerHal: [PE] scn:4 hdl:27322
lock_user:[email protected] pid:918 tid:5774 dur:0
05-19 [Link].942 918 32757 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].943 918 32757 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].944 918 32757 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].945 918 32757 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].995 918 5815 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c8f810
05-19 [Link].996 918 5815 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].996 918 5815 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].997 918 5815 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].998 918 5815 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 34366
05-19 [Link].999 918 5815 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde2fe000
05-19 [Link].999 918 5815 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].017 918 5822 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5822
05-19 [Link].019 918 5822 I mtkpower_client: ret_hdl:27323
05-19 [Link].021 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27323 hint:-1
pid:918 duration:0 => ret_hdl:27323
05-19 [Link].021 479 1594 I libPowerHal: [PE] scn:0 hdl:27323
lock_user:[email protected] pid:918 tid:5822 dur:0
05-19 [Link].045 918 5815 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].045 918 5815 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].045 918 5815 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].046 918 5815 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].046 918 5815 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].057 918 5774 I mtkpower_client: perf_lock_rel, hdl:27322,
tid:5774
05-19 [Link].058 479 1594 I libPowerHal: [PD] scn:4 hdl:27322
lock_user:[email protected] pid:918 tid:5774 dur:0
05-19 [Link].233 918 5767 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].271 918 5767 I mtkpower_client: perf_lock_rel, hdl:27322,
tid:5767
05-19 [Link].273 918 5767 I mtkpower_client: perf_lock_rel, hdl:27317,
tid:5767
05-19 [Link].274 479 1594 I libPowerHal: [PD] scn:3 hdl:27317
lock_user:[email protected] pid:918 tid:5774 dur:0
05-19 [Link].275 918 5767 I mtkpower_client: perf_lock_rel, hdl:27316,
tid:5767
05-19 [Link].278 479 1594 I libPowerHal: [PD] scn:1 hdl:27316
lock_user:[email protected] pid:918 tid:5774 dur:0
05-19 [Link].281 918 5767 I mtkpower_client: perf_lock_rel, hdl:27314,
tid:5767
05-19 [Link].295 918 5821 I mtkpower_client: perf_lock_rel, hdl:27323,
tid:5821
05-19 [Link].295 918 5821 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5821
05-19 [Link].296 479 1594 I libPowerHal: [PD] scn:0 hdl:27323
lock_user:[email protected] pid:918 tid:5822 dur:0
05-19 [Link].297 918 5821 I mtkpower_client: ret_hdl:27324
05-19 [Link].297 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27324 hint:-1
pid:918 duration:0 => ret_hdl:27324
05-19 [Link].298 479 1594 I libPowerHal: [PE] scn:0 hdl:27324
lock_user:[email protected] pid:918 tid:5821 dur:0
05-19 [Link].859 918 1085 E OMXNodeInstance:
setParameter(0xea209004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].860 918 1085 E OMXNodeInstance:
getParameter(0xea209004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].866 918 1085 E MtkOmxVdecEx: [0xea209000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].866 918 1085 E OMXNodeInstance:
setConfig(0xea209004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].866 918 1085 E OMXNodeInstance:
getParameter(0xea209004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].867 918 1085 E OMXNodeInstance:
getConfig(0xea209004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].868 918 1085 E OMXNodeInstance:
getConfig(0xea209004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].900 918 5865 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].900 918 5865 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].900 918 5865 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].902 918 5865 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].902 918 5865 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 27600
05-19 [Link].902 918 5865 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4397000
05-19 [Link].902 918 5865 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
960, Offset 0, Padding 0
05-19 [Link].907 918 5871 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5871
05-19 [Link].910 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27330 hint:-1
pid:918 duration:0 => ret_hdl:27330
05-19 [Link].910 479 1594 I libPowerHal: [PE] scn:2 hdl:27330
lock_user:[email protected] pid:918 tid:5871 dur:0
05-19 [Link].911 918 5871 I mtkpower_client: ret_hdl:27330
05-19 [Link].920 918 5865 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].920 918 5865 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].920 918 5865 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].920 918 5865 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].920 918 5865 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].058 918 5814 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].075 918 5814 I mtkpower_client: perf_lock_rel, hdl:27324,
tid:5814
05-19 [Link].076 918 5814 I mtkpower_client: perf_lock_rel, hdl:27323,
tid:5814
05-19 [Link].076 479 1594 I libPowerHal: [PD] scn:0 hdl:27324
lock_user:[email protected] pid:918 tid:5821 dur:0
05-19 [Link].111 918 5870 I mtkpower_client: perf_lock_rel, hdl:27330,
tid:5870
05-19 [Link].111 918 5870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5870
05-19 [Link].113 479 1594 I libPowerHal: [PD] scn:2 hdl:27330
lock_user:[email protected] pid:918 tid:5871 dur:0
05-19 [Link].116 918 5870 I mtkpower_client: ret_hdl:27331
05-19 [Link].117 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27331 hint:-1
pid:918 duration:0 => ret_hdl:27331
05-19 [Link].117 479 1594 I libPowerHal: [PE] scn:0 hdl:27331
lock_user:[email protected] pid:918 tid:5870 dur:0
05-19 [Link].277 918 5870 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5870
05-19 [Link].278 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27332 hint:-1
pid:918 duration:0 => ret_hdl:27332
05-19 [Link].278 479 1594 I libPowerHal: [PE] scn:2 hdl:27332
lock_user:[email protected] pid:918 tid:5870 dur:0
05-19 [Link].280 918 5870 I mtkpower_client: ret_hdl:27332
05-19 [Link].345 918 5870 I mtkpower_client: perf_lock_rel, hdl:27332,
tid:5870
05-19 [Link].345 479 1594 I libPowerHal: [PD] scn:2 hdl:27332
lock_user:[email protected] pid:918 tid:5870 dur:0
05-19 [Link].750 918 32761 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].750 918 32761 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].753 918 32761 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].753 918 32761 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].754 918 32761 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].755 918 32761 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].757 918 32757 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].806 918 5911 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c9d810
05-19 [Link].806 918 5911 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].806 918 5911 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].807 918 5911 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].807 918 5911 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16480
05-19 [Link].807 918 5911 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde6b6000
05-19 [Link].807 918 5911 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].811 918 5917 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5917
05-19 [Link].812 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27338 hint:-1
pid:918 duration:0 => ret_hdl:27338
05-19 [Link].812 479 1594 I libPowerHal: [PE] scn:1 hdl:27338
lock_user:[email protected] pid:918 tid:5917 dur:0
05-19 [Link].812 918 5917 I mtkpower_client: ret_hdl:27338
05-19 [Link].836 918 5911 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].836 918 5911 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].836 918 5911 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].836 918 5911 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].836 918 5911 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].994 918 5864 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].016 918 5864 I mtkpower_client: perf_lock_rel, hdl:27332,
tid:5864
05-19 [Link].017 918 5864 I mtkpower_client: perf_lock_rel, hdl:27331,
tid:5864
05-19 [Link].017 918 5864 I mtkpower_client: perf_lock_rel, hdl:27330,
tid:5864
05-19 [Link].018 479 1594 I libPowerHal: [PD] scn:0 hdl:27331
lock_user:[email protected] pid:918 tid:5870 dur:0
05-19 [Link].117 918 5915 I mtkpower_client: perf_lock_rel, hdl:27338,
tid:5915
05-19 [Link].118 918 5915 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5915
05-19 [Link].118 479 1594 I libPowerHal: [PD] scn:1 hdl:27338
lock_user:[email protected] pid:918 tid:5917 dur:0
05-19 [Link].125 918 5915 I mtkpower_client: ret_hdl:27339
05-19 [Link].125 918 5915 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5915
05-19 [Link].125 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27339 hint:-1
pid:918 duration:0 => ret_hdl:27339
05-19 [Link].125 479 1594 I libPowerHal: [PE] scn:0 hdl:27339
lock_user:[email protected] pid:918 tid:5915 dur:0
05-19 [Link].126 918 5915 I mtkpower_client: ret_hdl:27340
05-19 [Link].128 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27340 hint:-1
pid:918 duration:0 => ret_hdl:27340
05-19 [Link].128 479 1594 I libPowerHal: [PE] scn:1 hdl:27340
lock_user:[email protected] pid:918 tid:5915 dur:0
05-19 [Link].230 918 5915 I mtkpower_client: perf_lock_rel, hdl:27340,
tid:5915
05-19 [Link].239 479 1594 I libPowerHal: [PD] scn:1 hdl:27340
lock_user:[email protected] pid:918 tid:5915 dur:0
05-19 [Link].353 918 5915 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5915
05-19 [Link].355 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27341 hint:-1
pid:918 duration:0 => ret_hdl:27341
05-19 [Link].355 479 1594 I libPowerHal: [PE] scn:1 hdl:27341
lock_user:[email protected] pid:918 tid:5915 dur:0
05-19 [Link].357 918 5915 I mtkpower_client: ret_hdl:27341
05-19 [Link].444 918 5915 I mtkpower_client: perf_lock_rel, hdl:27341,
tid:5915
05-19 [Link].445 479 1594 I libPowerHal: [PD] scn:1 hdl:27341
lock_user:[email protected] pid:918 tid:5915 dur:0
05-19 [Link].434 918 11990 E OMXNodeInstance:
setParameter(0xea1e5804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].434 918 11990 E OMXNodeInstance:
getParameter(0xea1e5804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].436 918 11990 E MtkOmxVdecEx: [0xea1e5800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].436 918 11990 E OMXNodeInstance:
setConfig(0xea1e5804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].437 918 11990 E OMXNodeInstance:
getParameter(0xea1e5804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].437 918 11990 E OMXNodeInstance:
getConfig(0xea1e5804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].439 918 11990 E OMXNodeInstance:
getConfig(0xea1e5804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].504 918 5958 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].504 918 5958 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].504 918 5958 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].505 918 5958 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].505 918 5958 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 136660
05-19 [Link].505 918 5958 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2cf6000
05-19 [Link].505 918 5958 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].537 918 5964 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5964
05-19 [Link].539 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27347 hint:-1
pid:918 duration:0 => ret_hdl:27347
05-19 [Link].539 479 1594 I libPowerHal: [PE] scn:2 hdl:27347
lock_user:[email protected] pid:918 tid:5964 dur:0
05-19 [Link].539 918 5964 I mtkpower_client: ret_hdl:27347
05-19 [Link].573 918 5958 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].573 918 5958 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].573 918 5958 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].573 918 5958 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].573 918 5958 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].661 918 5910 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].690 918 5910 I mtkpower_client: perf_lock_rel, hdl:27341,
tid:5910
05-19 [Link].690 918 5910 I mtkpower_client: perf_lock_rel, hdl:27339,
tid:5910
05-19 [Link].691 918 5910 I mtkpower_client: perf_lock_rel, hdl:27338,
tid:5910
05-19 [Link].692 479 1594 I libPowerHal: [PD] scn:0 hdl:27339
lock_user:[email protected] pid:918 tid:5915 dur:0
05-19 [Link].938 918 5963 I mtkpower_client: perf_lock_rel, hdl:27347,
tid:5963
05-19 [Link].938 918 5963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5963
05-19 [Link].940 479 1594 I libPowerHal: [PD] scn:2 hdl:27347
lock_user:[email protected] pid:918 tid:5964 dur:0
05-19 [Link].941 918 5963 I mtkpower_client: ret_hdl:27348
05-19 [Link].941 918 5963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5963
05-19 [Link].942 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27348 hint:-1
pid:918 duration:0 => ret_hdl:27348
05-19 [Link].942 479 1594 I libPowerHal: [PE] scn:0 hdl:27348
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].943 918 5963 I mtkpower_client: ret_hdl:27349
05-19 [Link].945 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27349 hint:-1
pid:918 duration:0 => ret_hdl:27349
05-19 [Link].945 479 1594 I libPowerHal: [PE] scn:2 hdl:27349
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].022 918 5963 I mtkpower_client: perf_lock_rel, hdl:27349,
tid:5963
05-19 [Link].023 479 1594 I libPowerHal: [PD] scn:2 hdl:27349
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].404 918 5963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5963
05-19 [Link].406 918 5963 I mtkpower_client: ret_hdl:27351
05-19 [Link].406 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27351 hint:-1
pid:918 duration:0 => ret_hdl:27351
05-19 [Link].406 479 1594 I libPowerHal: [PE] scn:2 hdl:27351
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].515 918 5963 I mtkpower_client: perf_lock_rel, hdl:27351,
tid:5963
05-19 [Link].516 479 1594 I libPowerHal: [PD] scn:2 hdl:27351
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].557 918 5058 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].558 918 5058 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].562 918 5020 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].562 918 5020 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].563 918 5058 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].564 918 5020 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].565 918 5058 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].614 918 6005 E VDO_LOG : GetDecoderAPI hWrapper 0xe9ec5810
05-19 [Link].614 918 6005 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].614 918 6005 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].615 918 6005 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].615 918 6005 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 7337
05-19 [Link].615 918 6005 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde870000
05-19 [Link].615 918 6005 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].622 918 6012 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6012
05-19 [Link].624 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27356 hint:-1
pid:918 duration:0 => ret_hdl:27356
05-19 [Link].624 479 1594 I libPowerHal: [PE] scn:2 hdl:27356
lock_user:[email protected] pid:918 tid:6012 dur:0
05-19 [Link].625 918 6012 I mtkpower_client: ret_hdl:27356
05-19 [Link].678 918 6005 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].678 918 6005 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].678 918 6005 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].678 918 6005 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].678 918 6005 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].716 918 5963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:5963
05-19 [Link].718 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27357 hint:-1
pid:918 duration:0 => ret_hdl:27357
05-19 [Link].719 479 1594 I libPowerHal: [PE] scn:3 hdl:27357
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].720 918 5963 I mtkpower_client: ret_hdl:27357
05-19 [Link].783 918 5957 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].812 918 5957 I mtkpower_client: perf_lock_rel, hdl:27357,
tid:5957
05-19 [Link].812 918 5957 I mtkpower_client: perf_lock_rel, hdl:27348,
tid:5957
05-19 [Link].812 918 5957 I mtkpower_client: perf_lock_rel, hdl:27347,
tid:5957
05-19 [Link].813 479 1594 I libPowerHal: [PD] scn:3 hdl:27357
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].814 479 1594 I libPowerHal: [PD] scn:0 hdl:27348
lock_user:[email protected] pid:918 tid:5963 dur:0
05-19 [Link].120 918 6010 I mtkpower_client: perf_lock_rel, hdl:27356,
tid:6010
05-19 [Link].120 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].120 479 1594 I libPowerHal: [PD] scn:2 hdl:27356
lock_user:[email protected] pid:918 tid:6012 dur:0
05-19 [Link].121 918 6010 I mtkpower_client: ret_hdl:27358
05-19 [Link].121 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].122 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27358 hint:-1
pid:918 duration:0 => ret_hdl:27358
05-19 [Link].122 479 1594 I libPowerHal: [PE] scn:0 hdl:27358
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].123 918 6010 I mtkpower_client: ret_hdl:27359
05-19 [Link].123 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].124 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27359 hint:-1
pid:918 duration:0 => ret_hdl:27359
05-19 [Link].124 479 1594 I libPowerHal: [PE] scn:2 hdl:27359
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].125 918 6010 I mtkpower_client: ret_hdl:27360
05-19 [Link].125 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].126 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27360 hint:-1
pid:918 duration:0 => ret_hdl:27360
05-19 [Link].126 479 1594 I libPowerHal: [PE] scn:3 hdl:27360
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].127 918 6010 I mtkpower_client: ret_hdl:27361
05-19 [Link].127 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].128 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27361 hint:-1
pid:918 duration:0 => ret_hdl:27361
05-19 [Link].129 479 1594 I libPowerHal: [PE] scn:4 hdl:27361
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].129 918 6010 I mtkpower_client: ret_hdl:27362
05-19 [Link].130 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27362 hint:-1
pid:918 duration:0 => ret_hdl:27362
05-19 [Link].134 479 1594 I libPowerHal: [PE] scn:5 hdl:27362
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].443 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].444 918 6010 I mtkpower_client: ret_hdl:27363
05-19 [Link].444 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].445 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27363 hint:-1
pid:918 duration:0 => ret_hdl:27363
05-19 [Link].445 479 1594 I libPowerHal: [PE] scn:6 hdl:27363
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].446 918 6010 I mtkpower_client: ret_hdl:27364
05-19 [Link].447 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27364 hint:-1
pid:918 duration:0 => ret_hdl:27364
05-19 [Link].447 479 1594 I libPowerHal: [PE] scn:7 hdl:27364
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].537 918 6010 I mtkpower_client: perf_lock_rel, hdl:27364,
tid:6010
05-19 [Link].539 479 1594 I libPowerHal: [PD] scn:7 hdl:27364
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].615 918 6010 I mtkpower_client: perf_lock_rel, hdl:27363,
tid:6010
05-19 [Link].615 918 6010 I mtkpower_client: perf_lock_rel, hdl:27362,
tid:6010
05-19 [Link].616 479 1594 I libPowerHal: [PD] scn:6 hdl:27363
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].617 479 1594 I libPowerHal: [PD] scn:5 hdl:27362
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].722 918 6010 I mtkpower_client: perf_lock_rel, hdl:27361,
tid:6010
05-19 [Link].723 479 1594 I libPowerHal: [PD] scn:4 hdl:27361
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].920 918 6010 I mtkpower_client: perf_lock_rel, hdl:27360,
tid:6010
05-19 [Link].921 479 1594 I libPowerHal: [PD] scn:3 hdl:27360
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].118 918 6010 I mtkpower_client: perf_lock_rel, hdl:27359,
tid:6010
05-19 [Link].119 479 1594 I libPowerHal: [PD] scn:2 hdl:27359
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].997 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].998 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27367 hint:-1
pid:918 duration:0 => ret_hdl:27367
05-19 [Link].998 479 1594 I libPowerHal: [PE] scn:1 hdl:27367
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].999 918 6010 I mtkpower_client: ret_hdl:27367
05-19 [Link].999 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].001 918 6010 I mtkpower_client: ret_hdl:27368
05-19 [Link].002 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27368 hint:-1
pid:918 duration:0 => ret_hdl:27368
05-19 [Link].002 479 1594 I libPowerHal: [PE] scn:2 hdl:27368
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].327 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].328 918 6010 I mtkpower_client: ret_hdl:27369
05-19 [Link].328 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27369 hint:-1
pid:918 duration:0 => ret_hdl:27369
05-19 [Link].328 479 1594 I libPowerHal: [PE] scn:3 hdl:27369
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].418 918 6010 I mtkpower_client: perf_lock_rel, hdl:27369,
tid:6010
05-19 [Link].419 479 1594 I libPowerHal: [PD] scn:3 hdl:27369
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].775 918 6010 I mtkpower_client: perf_lock_rel, hdl:27368,
tid:6010
05-19 [Link].776 479 1594 I libPowerHal: [PD] scn:2 hdl:27368
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].229 918 6010 I mtkpower_client: perf_lock_rel, hdl:27367,
tid:6010
05-19 [Link].230 479 1594 I libPowerHal: [PD] scn:1 hdl:27367
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].539 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].541 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27370 hint:-1
pid:918 duration:0 => ret_hdl:27370
05-19 [Link].541 918 6010 I mtkpower_client: ret_hdl:27370
05-19 [Link].541 479 1594 I libPowerHal: [PE] scn:1 hdl:27370
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].753 918 6010 I mtkpower_client: perf_lock_rel, hdl:27370,
tid:6010
05-19 [Link].756 479 1594 I libPowerHal: [PD] scn:1 hdl:27370
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].583 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].584 918 6010 I mtkpower_client: ret_hdl:27371
05-19 [Link].584 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27371 hint:-1
pid:918 duration:0 => ret_hdl:27371
05-19 [Link].585 479 1594 I libPowerHal: [PE] scn:1 hdl:27371
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].679 918 6010 I mtkpower_client: perf_lock_rel, hdl:27371,
tid:6010
05-19 [Link].680 479 1594 I libPowerHal: [PD] scn:1 hdl:27371
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].918 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].919 918 6010 I mtkpower_client: ret_hdl:27372
05-19 [Link].920 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27372 hint:-1
pid:918 duration:0 => ret_hdl:27372
05-19 [Link].920 479 1594 I libPowerHal: [PE] scn:1 hdl:27372
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].000 918 6010 I mtkpower_client: perf_lock_rel, hdl:27372,
tid:6010
05-19 [Link].001 479 1594 I libPowerHal: [PD] scn:1 hdl:27372
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].262 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].263 918 6010 I mtkpower_client: ret_hdl:27374
05-19 [Link].264 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27374 hint:-1
pid:918 duration:0 => ret_hdl:27374
05-19 [Link].264 479 1594 I libPowerHal: [PE] scn:1 hdl:27374
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].621 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].622 918 6010 I mtkpower_client: ret_hdl:27375
05-19 [Link].622 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27375 hint:-1
pid:918 duration:0 => ret_hdl:27375
05-19 [Link].622 479 1594 I libPowerHal: [PE] scn:2 hdl:27375
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].693 918 6010 I mtkpower_client: perf_lock_rel, hdl:27375,
tid:6010
05-19 [Link].693 479 1594 I libPowerHal: [PD] scn:2 hdl:27375
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].784 918 6010 I mtkpower_client: perf_lock_rel, hdl:27374,
tid:6010
05-19 [Link].785 479 1594 I libPowerHal: [PD] scn:1 hdl:27374
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].133 918 11716 E OMXNodeInstance:
setParameter(0xea1e4004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].134 918 11990 E OMXNodeInstance:
getParameter(0xea1e4004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].141 918 11990 E MtkOmxVdecEx: [0xea1e4000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].142 918 11990 E OMXNodeInstance:
setConfig(0xea1e4004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].143 918 11990 E OMXNodeInstance:
getParameter(0xea1e4004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].143 918 5058 E OMXNodeInstance:
getConfig(0xea1e4004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].144 918 11990 E OMXNodeInstance:
getConfig(0xea1e4004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].200 918 6058 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].200 918 6058 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].200 918 6058 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].201 918 6058 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].201 918 6058 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17002
05-19 [Link].201 918 6058 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].201 918 6058 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].209 918 6063 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6063
05-19 [Link].210 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27380 hint:-1
pid:918 duration:0 => ret_hdl:27380
05-19 [Link].210 479 1594 I libPowerHal: [PE] scn:2 hdl:27380
lock_user:[email protected] pid:918 tid:6063 dur:0
05-19 [Link].211 918 6063 I mtkpower_client: ret_hdl:27380
05-19 [Link].260 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].261 918 6010 I mtkpower_client: ret_hdl:27381
05-19 [Link].265 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27381 hint:-1
pid:918 duration:0 => ret_hdl:27381
05-19 [Link].265 479 1594 I libPowerHal: [PE] scn:4 hdl:27381
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].277 918 6058 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].277 918 6058 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].277 918 6058 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].277 918 6058 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].277 918 6058 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].459 918 6010 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6010
05-19 [Link].460 918 6010 I mtkpower_client: ret_hdl:27382
05-19 [Link].461 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27382 hint:-1
pid:918 duration:0 => ret_hdl:27382
05-19 [Link].461 479 1594 I libPowerHal: [PE] scn:5 hdl:27382
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].658 918 6010 I mtkpower_client: perf_lock_rel, hdl:27382,
tid:6010
05-19 [Link].659 479 1594 I libPowerHal: [PD] scn:5 hdl:27382
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].736 918 6010 I mtkpower_client: perf_lock_rel, hdl:27381,
tid:6010
05-19 [Link].737 479 1594 I libPowerHal: [PD] scn:4 hdl:27381
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].448 918 6062 I mtkpower_client: perf_lock_rel, hdl:27380,
tid:6062
05-19 [Link].448 918 6062 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6062
05-19 [Link].449 479 1594 I libPowerHal: [PD] scn:2 hdl:27380
lock_user:[email protected] pid:918 tid:6063 dur:0
05-19 [Link].450 918 6062 I mtkpower_client: ret_hdl:27385
05-19 [Link].450 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27385 hint:-1
pid:918 duration:0 => ret_hdl:27385
05-19 [Link].450 479 1594 I libPowerHal: [PE] scn:2 hdl:27385
lock_user:[email protected] pid:918 tid:6062 dur:0
05-19 [Link].625 918 6004 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].641 918 6004 I mtkpower_client: perf_lock_rel, hdl:27364,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27363,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27362,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27369,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27382,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27381,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27358,
tid:6004
05-19 [Link].642 918 6004 I mtkpower_client: perf_lock_rel, hdl:27356,
tid:6004
05-19 [Link].645 479 1594 I libPowerHal: [PD] scn:0 hdl:27358
lock_user:[email protected] pid:918 tid:6010 dur:0
05-19 [Link].200 918 5058 E OMXNodeInstance:
setParameter(0xe9ec3004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].201 918 5058 E OMXNodeInstance:
getParameter(0xe9ec3004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].209 918 5058 E MtkOmxVdecEx: [0xe9ec3000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].209 918 5058 E OMXNodeInstance:
setConfig(0xe9ec3004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].210 918 5058 E OMXNodeInstance:
getParameter(0xe9ec3004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].210 918 5058 E OMXNodeInstance:
getConfig(0xe9ec3004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].211 918 5058 E OMXNodeInstance:
getConfig(0xe9ec3004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].264 918 6115 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c75810
05-19 [Link].265 918 6115 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].265 918 6115 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].265 918 6115 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].265 918 6115 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14275
05-19 [Link].265 918 6115 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2d5e000
05-19 [Link].265 918 6115 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].285 918 6121 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6121
05-19 [Link].285 918 6121 I mtkpower_client: ret_hdl:27391
05-19 [Link].286 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27391 hint:-1
pid:918 duration:0 => ret_hdl:27391
05-19 [Link].286 479 1594 I libPowerHal: [PE] scn:1 hdl:27391
lock_user:[email protected] pid:918 tid:6121 dur:0
05-19 [Link].286 918 6115 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].286 918 6115 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].286 918 6115 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].286 918 6115 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].286 918 6115 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].385 918 6057 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].414 918 6057 I mtkpower_client: perf_lock_rel, hdl:27385,
tid:6057
05-19 [Link].414 918 6057 I mtkpower_client: perf_lock_rel, hdl:27380,
tid:6057
05-19 [Link].415 479 1594 I libPowerHal: [PD] scn:2 hdl:27385
lock_user:[email protected] pid:918 tid:6062 dur:0
05-19 [Link].574 918 6120 I mtkpower_client: perf_lock_rel, hdl:27391,
tid:6120
05-19 [Link].575 918 6120 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6120
05-19 [Link].577 479 1594 I libPowerHal: [PD] scn:1 hdl:27391
lock_user:[email protected] pid:918 tid:6121 dur:0
05-19 [Link].579 918 6120 I mtkpower_client: ret_hdl:27392
05-19 [Link].579 918 6120 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6120
05-19 [Link].580 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27392 hint:-1
pid:918 duration:0 => ret_hdl:27392
05-19 [Link].580 479 1594 I libPowerHal: [PE] scn:1 hdl:27392
lock_user:[email protected] pid:918 tid:6120 dur:0
05-19 [Link].581 918 6120 I mtkpower_client: ret_hdl:27393
05-19 [Link].582 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27393 hint:-1
pid:918 duration:0 => ret_hdl:27393
05-19 [Link].582 479 1594 I libPowerHal: [PE] scn:2 hdl:27393
lock_user:[email protected] pid:918 tid:6120 dur:0
05-19 [Link].791 918 6120 I mtkpower_client: perf_lock_rel, hdl:27393,
tid:6120
05-19 [Link].792 479 1594 I libPowerHal: [PD] scn:2 hdl:27393
lock_user:[email protected] pid:918 tid:6120 dur:0
05-19 [Link].125 918 5058 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].125 918 11990 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].130 918 11717 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].130 918 11717 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].130 918 1960 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].130 918 11689 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].131 918 1721 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].165 918 6163 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].165 918 6163 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].165 918 6163 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].166 918 6163 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].166 918 6163 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 27007
05-19 [Link].166 918 6163 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].166 918 6163 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].171 918 6168 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6168
05-19 [Link].173 918 6168 I mtkpower_client: ret_hdl:27399
05-19 [Link].173 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27399 hint:-1
pid:918 duration:0 => ret_hdl:27399
05-19 [Link].173 479 1594 I libPowerHal: [PE] scn:0 hdl:27399
lock_user:[email protected] pid:918 tid:6168 dur:0
05-19 [Link].183 918 6163 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].183 918 6163 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].183 918 6163 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].183 918 6163 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].184 918 6163 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].438 918 6113 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].459 918 6113 I mtkpower_client: perf_lock_rel, hdl:27393,
tid:6113
05-19 [Link].459 918 6113 I mtkpower_client: perf_lock_rel, hdl:27392,
tid:6113
05-19 [Link].459 918 6113 I mtkpower_client: perf_lock_rel, hdl:27391,
tid:6113
05-19 [Link].461 479 1594 I libPowerHal: [PD] scn:1 hdl:27392
lock_user:[email protected] pid:918 tid:6120 dur:0
05-19 [Link].550 918 6167 I mtkpower_client: perf_lock_rel, hdl:27399,
tid:6167
05-19 [Link].551 918 6167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6167
05-19 [Link].552 479 1594 I libPowerHal: [PD] scn:0 hdl:27399
lock_user:[email protected] pid:918 tid:6168 dur:0
05-19 [Link].555 918 6167 I mtkpower_client: ret_hdl:27401
05-19 [Link].555 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27401 hint:-1
pid:918 duration:0 => ret_hdl:27401
05-19 [Link].555 479 1594 I libPowerHal: [PE] scn:2 hdl:27401
lock_user:[email protected] pid:918 tid:6167 dur:0
05-19 [Link].658 918 11717 E OMXNodeInstance:
setParameter(0xe9ec3004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].658 918 11717 E OMXNodeInstance:
getParameter(0xe9ec3004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].661 918 11717 E MtkOmxVdecEx: [0xe9ec3000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].661 918 11717 E OMXNodeInstance:
setConfig(0xe9ec3004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].661 918 11717 E OMXNodeInstance:
getParameter(0xe9ec3004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].662 918 11717 E OMXNodeInstance:
getConfig(0xe9ec3004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].663 918 11717 E OMXNodeInstance:
getConfig(0xe9ec3004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].697 918 6210 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c75810
05-19 [Link].697 918 6210 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].697 918 6210 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].698 918 6210 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].698 918 6210 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14275
05-19 [Link].698 918 6210 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].698 918 6210 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].706 918 6216 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6216
05-19 [Link].707 918 6216 I mtkpower_client: ret_hdl:27406
05-19 [Link].710 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27406 hint:-1
pid:918 duration:0 => ret_hdl:27406
05-19 [Link].710 479 1594 I libPowerHal: [PE] scn:0 hdl:27406
lock_user:[email protected] pid:918 tid:6216 dur:0
05-19 [Link].713 918 6210 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].713 918 6210 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].713 918 6210 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].713 918 6210 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].713 918 6210 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].734 918 6167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6167
05-19 [Link].740 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27407 hint:-1
pid:918 duration:0 => ret_hdl:27407
05-19 [Link].741 479 1594 I libPowerHal: [PE] scn:3 hdl:27407
lock_user:[email protected] pid:918 tid:6167 dur:0
05-19 [Link].744 918 6167 I mtkpower_client: ret_hdl:27407
05-19 [Link].841 918 6162 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].856 918 6162 I mtkpower_client: perf_lock_rel, hdl:27407,
tid:6162
05-19 [Link].856 918 6162 I mtkpower_client: perf_lock_rel, hdl:27401,
tid:6162
05-19 [Link].856 918 6162 I mtkpower_client: perf_lock_rel, hdl:27399,
tid:6162
05-19 [Link].859 479 1594 I libPowerHal: [PD] scn:3 hdl:27407
lock_user:[email protected] pid:918 tid:6167 dur:0
05-19 [Link].866 479 1594 I libPowerHal: [PD] scn:2 hdl:27401
lock_user:[email protected] pid:918 tid:6167 dur:0
05-19 [Link].989 918 6215 I mtkpower_client: perf_lock_rel, hdl:27406,
tid:6215
05-19 [Link].992 918 6215 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6215
05-19 [Link].993 479 1594 I libPowerHal: [PD] scn:0 hdl:27406
lock_user:[email protected] pid:918 tid:6216 dur:0
05-19 [Link].994 918 6215 I mtkpower_client: ret_hdl:27413
05-19 [Link].994 918 6215 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6215
05-19 [Link].994 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27413 hint:-1
pid:918 duration:0 => ret_hdl:27413
05-19 [Link].994 479 1594 I libPowerHal: [PE] scn:0 hdl:27413
lock_user:[email protected] pid:918 tid:6215 dur:0
05-19 [Link].995 918 6215 I mtkpower_client: ret_hdl:27414
05-19 [Link].995 918 6215 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6215
05-19 [Link].995 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27414 hint:-1
pid:918 duration:0 => ret_hdl:27414
05-19 [Link].995 479 1594 I libPowerHal: [PE] scn:1 hdl:27414
lock_user:[email protected] pid:918 tid:6215 dur:0
05-19 [Link].996 918 6215 I mtkpower_client: ret_hdl:27415
05-19 [Link].996 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27415 hint:-1
pid:918 duration:0 => ret_hdl:27415
05-19 [Link].996 479 1594 I libPowerHal: [PE] scn:2 hdl:27415
lock_user:[email protected] pid:918 tid:6215 dur:0
05-19 [Link].996 918 11716 E OMXNodeInstance:
setParameter(0xea156004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].996 918 11716 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].999 918 11716 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].999 918 11716 E OMXNodeInstance:
setConfig(0xea156004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].000 918 11716 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].000 918 11716 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].001 918 11716 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].043 918 6260 E VDO_LOG : GetDecoderAPI hWrapper 0xea041810
05-19 [Link].043 918 6260 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].043 918 6260 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].044 918 6260 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].044 918 6260 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17002
05-19 [Link].044 918 6260 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].044 918 6260 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].046 918 6265 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6265
05-19 [Link].048 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27416 hint:-1
pid:918 duration:0 => ret_hdl:27416
05-19 [Link].048 479 1594 I libPowerHal: [PE] scn:4 hdl:27416
lock_user:[email protected] pid:918 tid:6265 dur:0
05-19 [Link].048 918 6265 I mtkpower_client: ret_hdl:27416
05-19 [Link].068 918 6260 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].069 918 6260 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].069 918 6260 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].069 918 6260 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].069 918 6260 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].266 918 6209 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].282 918 6209 I mtkpower_client: perf_lock_rel, hdl:27415,
tid:6209
05-19 [Link].283 479 1594 I libPowerHal: [PD] scn:2 hdl:27415
lock_user:[email protected] pid:918 tid:6215 dur:0
05-19 [Link].284 918 6209 I mtkpower_client: perf_lock_rel, hdl:27414,
tid:6209
05-19 [Link].285 479 1594 I libPowerHal: [PD] scn:1 hdl:27414
lock_user:[email protected] pid:918 tid:6215 dur:0
05-19 [Link].287 918 6209 I mtkpower_client: perf_lock_rel, hdl:27413,
tid:6209
05-19 [Link].288 918 6209 I mtkpower_client: perf_lock_rel, hdl:27406,
tid:6209
05-19 [Link].289 479 1594 I libPowerHal: [PD] scn:0 hdl:27413
lock_user:[email protected] pid:918 tid:6215 dur:0
05-19 [Link].296 918 6264 I mtkpower_client: perf_lock_rel, hdl:27416,
tid:6264
05-19 [Link].296 918 6264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6264
05-19 [Link].296 918 6264 I mtkpower_client: ret_hdl:27417
05-19 [Link].297 479 1594 I libPowerHal: [PD] scn:4 hdl:27416
lock_user:[email protected] pid:918 tid:6265 dur:0
05-19 [Link].298 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27417 hint:-1
pid:918 duration:0 => ret_hdl:27417
05-19 [Link].298 479 1594 I libPowerHal: [PE] scn:0 hdl:27417
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].548 918 6264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6264
05-19 [Link].549 918 6264 I mtkpower_client: ret_hdl:27418
05-19 [Link].549 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27418 hint:-1
pid:918 duration:0 => ret_hdl:27418
05-19 [Link].549 479 1594 I libPowerHal: [PE] scn:1 hdl:27418
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].614 918 6264 I mtkpower_client: perf_lock_rel, hdl:27418,
tid:6264
05-19 [Link].615 479 1594 I libPowerHal: [PD] scn:1 hdl:27418
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].028 918 5020 E OMXNodeInstance:
setParameter(0xea157804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].029 918 5020 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].031 918 5033 E MtkOmxVdecEx: [0xea157800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].032 918 5033 E OMXNodeInstance:
setConfig(0xea157804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].032 918 11689 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].033 918 11689 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].036 918 11689 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].149 918 6304 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].149 918 6304 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].149 918 6304 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].153 918 6304 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].153 918 6304 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14275
05-19 [Link].153 918 6304 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].153 918 6304 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].157 918 6310 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6310
05-19 [Link].159 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27424 hint:-1
pid:918 duration:0 => ret_hdl:27424
05-19 [Link].159 479 1594 I libPowerHal: [PE] scn:2 hdl:27424
lock_user:[email protected] pid:918 tid:6310 dur:0
05-19 [Link].161 918 6310 I mtkpower_client: ret_hdl:27424
05-19 [Link].197 918 6304 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].197 918 6304 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].197 918 6304 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].197 918 6304 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].197 918 6304 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].317 918 6309 I mtkpower_client: perf_lock_rel, hdl:27424,
tid:6309
05-19 [Link].319 918 6309 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6309
05-19 [Link].321 479 1594 I libPowerHal: [PD] scn:2 hdl:27424
lock_user:[email protected] pid:918 tid:6310 dur:0
05-19 [Link].322 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27425 hint:-1
pid:918 duration:0 => ret_hdl:27425
05-19 [Link].322 479 1594 I libPowerHal: [PE] scn:4 hdl:27425
lock_user:[email protected] pid:918 tid:6309 dur:0
05-19 [Link].322 918 6309 I mtkpower_client: ret_hdl:27425
05-19 [Link].906 918 6264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6264
05-19 [Link].909 918 6264 I mtkpower_client: ret_hdl:27426
05-19 [Link].910 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27426 hint:-1
pid:918 duration:0 => ret_hdl:27426
05-19 [Link].910 479 1594 I libPowerHal: [PE] scn:2 hdl:27426
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].991 918 6264 I mtkpower_client: perf_lock_rel, hdl:27426,
tid:6264
05-19 [Link].992 479 1594 I libPowerHal: [PD] scn:2 hdl:27426
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].411 918 6303 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].429 918 6303 I mtkpower_client: perf_lock_rel, hdl:27425,
tid:6303
05-19 [Link].429 918 6303 I mtkpower_client: perf_lock_rel, hdl:27424,
tid:6303
05-19 [Link].430 479 1594 I libPowerHal: [PD] scn:4 hdl:27425
lock_user:[email protected] pid:918 tid:6309 dur:0
05-19 [Link].667 918 6264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6264
05-19 [Link].668 918 6264 I mtkpower_client: ret_hdl:27429
05-19 [Link].668 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27429 hint:-1
pid:918 duration:0 => ret_hdl:27429
05-19 [Link].668 479 1594 I libPowerHal: [PE] scn:1 hdl:27429
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].861 918 6264 I mtkpower_client: perf_lock_rel, hdl:27429,
tid:6264
05-19 [Link].862 479 1594 I libPowerHal: [PD] scn:1 hdl:27429
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].477 918 6264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6264
05-19 [Link].479 918 6264 I mtkpower_client: ret_hdl:27432
05-19 [Link].480 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27432 hint:-1
pid:918 duration:0 => ret_hdl:27432
05-19 [Link].480 479 1594 I libPowerHal: [PE] scn:2 hdl:27432
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].642 918 5033 E OMXNodeInstance:
setParameter(0xea157804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].642 918 9097 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].647 918 11689 E MtkOmxVdecEx: [0xea157800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].647 918 11689 E OMXNodeInstance:
setConfig(0xea157804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].648 918 11689 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].648 918 9097 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].650 918 5033 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].714 918 6349 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].714 918 6349 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].714 918 6349 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].714 918 6349 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].714 918 6349 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14275
05-19 [Link].714 918 6349 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2d5e000
05-19 [Link].714 918 6349 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].722 918 6356 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6356
05-19 [Link].723 918 6356 I mtkpower_client: ret_hdl:27435
05-19 [Link].723 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27435 hint:-1
pid:918 duration:0 => ret_hdl:27435
05-19 [Link].723 479 1594 I libPowerHal: [PE] scn:3 hdl:27435
lock_user:[email protected] pid:918 tid:6356 dur:0
05-19 [Link].763 918 6349 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].763 918 6349 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].763 918 6349 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].763 918 6349 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].763 918 6349 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].160 918 6264 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6264
05-19 [Link].163 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27438 hint:-1
pid:918 duration:0 => ret_hdl:27438
05-19 [Link].163 479 1594 I libPowerHal: [PE] scn:4 hdl:27438
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].163 918 6264 I mtkpower_client: ret_hdl:27438
05-19 [Link].196 918 6259 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].227 918 6259 I mtkpower_client: perf_lock_rel, hdl:27438,
tid:6259
05-19 [Link].228 918 6259 I mtkpower_client: perf_lock_rel, hdl:27432,
tid:6259
05-19 [Link].228 918 6259 I mtkpower_client: perf_lock_rel, hdl:27417,
tid:6259
05-19 [Link].228 918 6259 I mtkpower_client: perf_lock_rel, hdl:27416,
tid:6259
05-19 [Link].228 479 1594 I libPowerHal: [PD] scn:4 hdl:27438
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].231 479 1594 I libPowerHal: [PD] scn:2 hdl:27432
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].232 479 1594 I libPowerHal: [PD] scn:0 hdl:27417
lock_user:[email protected] pid:918 tid:6264 dur:0
05-19 [Link].249 918 6354 I mtkpower_client: perf_lock_rel, hdl:27435,
tid:6354
05-19 [Link].249 918 6354 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6354
05-19 [Link].263 479 1594 I libPowerHal: [PD] scn:3 hdl:27435
lock_user:[email protected] pid:918 tid:6356 dur:0
05-19 [Link].264 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27439 hint:-1
pid:918 duration:0 => ret_hdl:27439
05-19 [Link].264 918 6354 I mtkpower_client: ret_hdl:27439
05-19 [Link].264 479 1594 I libPowerHal: [PE] scn:0 hdl:27439
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].462 918 6354 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6354
05-19 [Link].462 918 6354 I mtkpower_client: ret_hdl:27443
05-19 [Link].462 918 6354 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6354
05-19 [Link].463 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27443 hint:-1
pid:918 duration:0 => ret_hdl:27443
05-19 [Link].464 479 1594 I libPowerHal: [PE] scn:4 hdl:27443
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].467 918 6354 I mtkpower_client: ret_hdl:27444
05-19 [Link].468 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27444 hint:-1
pid:918 duration:0 => ret_hdl:27444
05-19 [Link].468 479 1594 I libPowerHal: [PE] scn:5 hdl:27444
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].599 918 13399 E OMXNodeInstance:
setParameter(0xea156004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].600 918 13399 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 13399 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].602 918 13399 E OMXNodeInstance:
setConfig(0xea156004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 13399 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 13399 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].604 918 13399 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].647 918 6399 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].647 918 6399 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].647 918 6399 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].664 918 6399 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].664 918 6399 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 27007
05-19 [Link].664 918 6399 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1dba000
05-19 [Link].664 918 6399 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].676 918 6354 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6354
05-19 [Link].677 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27447 hint:-1
pid:918 duration:0 => ret_hdl:27447
05-19 [Link].677 479 1594 I libPowerHal: [PE] scn:1 hdl:27447
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].679 918 6354 I mtkpower_client: ret_hdl:27447
05-19 [Link].685 918 6404 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6404
05-19 [Link].688 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27448 hint:-1
pid:918 duration:0 => ret_hdl:27448
05-19 [Link].688 479 1594 I libPowerHal: [PE] scn:2 hdl:27448
lock_user:[email protected] pid:918 tid:6404 dur:0
05-19 [Link].689 918 6404 I mtkpower_client: ret_hdl:27448
05-19 [Link].723 918 6348 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].734 918 6348 I mtkpower_client: perf_lock_rel, hdl:27447,
tid:6348
05-19 [Link].735 918 6348 I mtkpower_client: perf_lock_rel, hdl:27444,
tid:6348
05-19 [Link].735 918 6348 I mtkpower_client: perf_lock_rel, hdl:27443,
tid:6348
05-19 [Link].736 918 6348 I mtkpower_client: perf_lock_rel, hdl:27439,
tid:6348
05-19 [Link].736 479 1594 I libPowerHal: [PD] scn:1 hdl:27447
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].736 918 6348 I mtkpower_client: perf_lock_rel, hdl:27435,
tid:6348
05-19 [Link].741 479 1594 I libPowerHal: [PD] scn:5 hdl:27444
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].742 479 1594 I libPowerHal: [PD] scn:4 hdl:27443
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].744 479 1594 I libPowerHal: [PD] scn:0 hdl:27439
lock_user:[email protected] pid:918 tid:6354 dur:0
05-19 [Link].763 918 6399 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].763 918 6399 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].763 918 6399 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].763 918 6399 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].763 918 6399 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].094 918 6403 I mtkpower_client: perf_lock_rel, hdl:27448,
tid:6403
05-19 [Link].094 918 6403 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6403
05-19 [Link].095 479 1594 I libPowerHal: [PD] scn:2 hdl:27448
lock_user:[email protected] pid:918 tid:6404 dur:0
05-19 [Link].096 918 6403 I mtkpower_client: ret_hdl:27449
05-19 [Link].096 918 6403 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6403
05-19 [Link].096 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27449 hint:-1
pid:918 duration:0 => ret_hdl:27449
05-19 [Link].096 479 1594 I libPowerHal: [PE] scn:0 hdl:27449
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].106 918 6403 I mtkpower_client: ret_hdl:27450
05-19 [Link].106 918 6403 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6403
05-19 [Link].108 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27450 hint:-1
pid:918 duration:0 => ret_hdl:27450
05-19 [Link].108 479 1594 I libPowerHal: [PE] scn:1 hdl:27450
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].109 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27451 hint:-1
pid:918 duration:0 => ret_hdl:27451
05-19 [Link].110 479 1594 I libPowerHal: [PE] scn:2 hdl:27451
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].110 918 6403 I mtkpower_client: ret_hdl:27451
05-19 [Link].197 918 6403 I mtkpower_client: perf_lock_rel, hdl:27451,
tid:6403
05-19 [Link].199 479 1594 I libPowerHal: [PD] scn:2 hdl:27451
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].274 918 6403 I mtkpower_client: perf_lock_rel, hdl:27450,
tid:6403
05-19 [Link].275 479 1594 I libPowerHal: [PD] scn:1 hdl:27450
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].393 918 13399 E OMXNodeInstance:
setParameter(0xea157804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].393 918 5033 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].399 918 1066 E MtkOmxVdecEx: [0xea157800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].399 918 1066 E OMXNodeInstance:
setConfig(0xea157804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].400 918 918 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].400 918 5724 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].401 918 9097 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].431 918 6403 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6403
05-19 [Link].432 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27457 hint:-1
pid:918 duration:0 => ret_hdl:27457
05-19 [Link].432 479 1594 I libPowerHal: [PE] scn:2 hdl:27457
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].433 918 6403 I mtkpower_client: ret_hdl:27457
05-19 [Link].445 918 6444 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].445 918 6444 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].445 918 6444 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].446 918 6444 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].446 918 6444 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 129511
05-19 [Link].446 918 6444 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdddbf000
05-19 [Link].446 918 6444 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].465 918 6449 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6449
05-19 [Link].474 918 6449 I mtkpower_client: ret_hdl:27458
05-19 [Link].476 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27458 hint:-1
pid:918 duration:0 => ret_hdl:27458
05-19 [Link].476 479 1594 I libPowerHal: [PE] scn:3 hdl:27458
lock_user:[email protected] pid:918 tid:6449 dur:0
05-19 [Link].495 918 6444 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].495 918 6444 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].495 918 6444 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].495 918 6444 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].495 918 6444 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].715 918 6398 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].738 918 6398 I mtkpower_client: perf_lock_rel, hdl:27451,
tid:6398
05-19 [Link].740 918 6398 I mtkpower_client: perf_lock_rel, hdl:27457,
tid:6398
05-19 [Link].740 479 1594 I libPowerHal: [PD] scn:2 hdl:27457
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].741 918 6398 I mtkpower_client: perf_lock_rel, hdl:27449,
tid:6398
05-19 [Link].741 918 6398 I mtkpower_client: perf_lock_rel, hdl:27448,
tid:6398
05-19 [Link].742 479 1594 I libPowerHal: [PD] scn:0 hdl:27449
lock_user:[email protected] pid:918 tid:6403 dur:0
05-19 [Link].925 918 6448 I mtkpower_client: perf_lock_rel, hdl:27458,
tid:6448
05-19 [Link].925 918 6448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6448
05-19 [Link].925 479 1594 I libPowerHal: [PD] scn:3 hdl:27458
lock_user:[email protected] pid:918 tid:6449 dur:0
05-19 [Link].926 918 6448 I mtkpower_client: ret_hdl:27459
05-19 [Link].927 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27459 hint:-1
pid:918 duration:0 => ret_hdl:27459
05-19 [Link].927 479 1594 I libPowerHal: [PE] scn:0 hdl:27459
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].927 918 6448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6448
05-19 [Link].927 918 6448 I mtkpower_client: ret_hdl:27460
05-19 [Link].928 918 6448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6448
05-19 [Link].928 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27460 hint:-1
pid:918 duration:0 => ret_hdl:27460
05-19 [Link].928 479 1594 I libPowerHal: [PE] scn:2 hdl:27460
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].931 918 6448 I mtkpower_client: ret_hdl:27461
05-19 [Link].931 918 6448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6448
05-19 [Link].931 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27461 hint:-1
pid:918 duration:0 => ret_hdl:27461
05-19 [Link].931 479 1594 I libPowerHal: [PE] scn:3 hdl:27461
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].934 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27462 hint:-1
pid:918 duration:0 => ret_hdl:27462
05-19 [Link].934 479 1594 I libPowerHal: [PE] scn:4 hdl:27462
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].935 918 6448 I mtkpower_client: ret_hdl:27462
05-19 [Link].021 918 6448 I mtkpower_client: perf_lock_rel, hdl:27462,
tid:6448
05-19 [Link].023 479 1594 I libPowerHal: [PD] scn:4 hdl:27462
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].184 918 6448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6448
05-19 [Link].185 918 6448 I mtkpower_client: ret_hdl:27463
05-19 [Link].185 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27463 hint:-1
pid:918 duration:0 => ret_hdl:27463
05-19 [Link].185 479 1594 I libPowerHal: [PE] scn:4 hdl:27463
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].289 918 6448 I mtkpower_client: perf_lock_rel, hdl:27463,
tid:6448
05-19 [Link].290 479 1594 I libPowerHal: [PD] scn:4 hdl:27463
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].497 918 5033 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].498 918 13399 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].505 918 11717 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].505 918 11717 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].506 918 11717 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].508 918 32757 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].509 918 32757 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].548 918 6490 E VDO_LOG : GetDecoderAPI hWrapper 0xea2cf810
05-19 [Link].548 918 6490 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].548 918 6490 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].549 918 6490 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].549 918 6490 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 44530
05-19 [Link].549 918 6490 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2c8e000
05-19 [Link].549 918 6490 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].552 918 6495 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6495
05-19 [Link].553 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27469 hint:-1
pid:918 duration:0 => ret_hdl:27469
05-19 [Link].553 479 1594 I libPowerHal: [PE] scn:1 hdl:27469
lock_user:[email protected] pid:918 tid:6495 dur:0
05-19 [Link].553 918 6495 I mtkpower_client: ret_hdl:27469
05-19 [Link].557 918 6490 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].557 918 6490 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].557 918 6490 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].557 918 6490 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].557 918 6490 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].670 918 6443 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].697 918 6443 I mtkpower_client: perf_lock_rel, hdl:27463,
tid:6443
05-19 [Link].697 918 6443 I mtkpower_client: perf_lock_rel, hdl:27461,
tid:6443
05-19 [Link].698 918 6443 I mtkpower_client: perf_lock_rel, hdl:27460,
tid:6443
05-19 [Link].698 918 6443 I mtkpower_client: perf_lock_rel, hdl:27459,
tid:6443
05-19 [Link].698 918 6443 I mtkpower_client: perf_lock_rel, hdl:27458,
tid:6443
05-19 [Link].699 479 1594 I libPowerHal: [PD] scn:3 hdl:27461
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].701 479 1594 I libPowerHal: [PD] scn:2 hdl:27460
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].702 479 1594 I libPowerHal: [PD] scn:0 hdl:27459
lock_user:[email protected] pid:918 tid:6448 dur:0
05-19 [Link].857 918 6494 I mtkpower_client: perf_lock_rel, hdl:27469,
tid:6494
05-19 [Link].858 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].859 479 1594 I libPowerHal: [PD] scn:1 hdl:27469
lock_user:[email protected] pid:918 tid:6495 dur:0
05-19 [Link].860 918 6494 I mtkpower_client: ret_hdl:27470
05-19 [Link].860 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].860 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27470 hint:-1
pid:918 duration:0 => ret_hdl:27470
05-19 [Link].860 479 1594 I libPowerHal: [PE] scn:0 hdl:27470
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].861 918 6494 I mtkpower_client: ret_hdl:27471
05-19 [Link].861 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27471 hint:-1
pid:918 duration:0 => ret_hdl:27471
05-19 [Link].861 479 1594 I libPowerHal: [PE] scn:1 hdl:27471
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].276 918 6494 I mtkpower_client: perf_lock_rel, hdl:27471,
tid:6494
05-19 [Link].277 479 1594 I libPowerHal: [PD] scn:1 hdl:27471
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].379 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].380 918 6494 I mtkpower_client: ret_hdl:27472
05-19 [Link].380 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27472 hint:-1
pid:918 duration:0 => ret_hdl:27472
05-19 [Link].380 479 1594 I libPowerHal: [PE] scn:1 hdl:27472
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].550 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].552 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27473 hint:-1
pid:918 duration:0 => ret_hdl:27473
05-19 [Link].552 479 1594 I libPowerHal: [PE] scn:2 hdl:27473
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].552 918 6494 I mtkpower_client: ret_hdl:27473
05-19 [Link].673 918 6494 I mtkpower_client: perf_lock_rel, hdl:27473,
tid:6494
05-19 [Link].674 479 1594 I libPowerHal: [PD] scn:2 hdl:27473
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].248 918 6494 I mtkpower_client: perf_lock_rel, hdl:27472,
tid:6494
05-19 [Link].250 479 1594 I libPowerHal: [PD] scn:1 hdl:27472
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].095 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].096 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27474 hint:-1
pid:918 duration:0 => ret_hdl:27474
05-19 [Link].097 479 1594 I libPowerHal: [PE] scn:1 hdl:27474
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].097 918 6494 I mtkpower_client: ret_hdl:27474
05-19 [Link].474 918 6494 I mtkpower_client: perf_lock_rel, hdl:27474,
tid:6494
05-19 [Link].476 479 1594 I libPowerHal: [PD] scn:1 hdl:27474
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].620 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].623 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27475 hint:-1
pid:918 duration:0 => ret_hdl:27475
05-19 [Link].623 479 1594 I libPowerHal: [PE] scn:1 hdl:27475
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].624 918 6494 I mtkpower_client: ret_hdl:27475
05-19 [Link].739 918 6494 I mtkpower_client: perf_lock_rel, hdl:27475,
tid:6494
05-19 [Link].740 479 1594 I libPowerHal: [PD] scn:1 hdl:27475
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].279 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].281 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27477 hint:-1
pid:918 duration:0 => ret_hdl:27477
05-19 [Link].281 479 1594 I libPowerHal: [PE] scn:1 hdl:27477
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].282 918 6494 I mtkpower_client: ret_hdl:27477
05-19 [Link].922 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].924 918 6494 I mtkpower_client: ret_hdl:27479
05-19 [Link].924 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27479 hint:-1
pid:918 duration:0 => ret_hdl:27479
05-19 [Link].924 479 1594 I libPowerHal: [PE] scn:2 hdl:27479
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].083 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].084 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27480 hint:-1
pid:918 duration:0 => ret_hdl:27480
05-19 [Link].084 479 1594 I libPowerHal: [PE] scn:3 hdl:27480
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].085 918 6494 I mtkpower_client: ret_hdl:27480
05-19 [Link].329 918 6494 I mtkpower_client: perf_lock_rel, hdl:27480,
tid:6494
05-19 [Link].330 479 1594 I libPowerHal: [PD] scn:3 hdl:27480
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].429 918 1721 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].429 918 1721 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].434 918 13399 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].435 918 13399 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].436 918 1820 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].436 918 13399 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].437 918 13399 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].542 918 6538 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].543 918 6538 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].543 918 6538 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].544 918 6538 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].544 918 6538 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 46440
05-19 [Link].544 918 6538 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde073000
05-19 [Link].544 918 6538 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].546 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].546 918 6544 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6544
05-19 [Link].553 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27484 hint:-1
pid:918 duration:0 => ret_hdl:27484
05-19 [Link].553 479 1594 I libPowerHal: [PE] scn:3 hdl:27484
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].557 918 6538 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].557 918 6538 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].557 918 6538 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].557 918 6538 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].557 918 6538 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].562 918 6494 I mtkpower_client: ret_hdl:27484
05-19 [Link].562 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].575 918 6494 I mtkpower_client: ret_hdl:27485
05-19 [Link].576 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27485 hint:-1
pid:918 duration:0 => ret_hdl:27485
05-19 [Link].576 479 1594 I libPowerHal: [PE] scn:5 hdl:27485
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].577 918 6544 I mtkpower_client: ret_hdl:27486
05-19 [Link].577 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27486 hint:-1
pid:918 duration:0 => ret_hdl:27486
05-19 [Link].577 479 1594 I libPowerHal: [PE] scn:7 hdl:27486
lock_user:[email protected] pid:918 tid:6544 dur:0
05-19 [Link].852 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].855 918 6494 I mtkpower_client: ret_hdl:27489
05-19 [Link].855 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].856 918 6494 I mtkpower_client: ret_hdl:27490
05-19 [Link].856 918 6494 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6494
05-19 [Link].857 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27489 hint:-1
pid:918 duration:0 => ret_hdl:27489
05-19 [Link].858 479 1594 I libPowerHal: [PE] scn:6 hdl:27489
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].860 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:27490 hint:-1
pid:918 duration:0 => ret_hdl:27490
05-19 [Link].860 479 1594 I libPowerHal: [PE] scn:8 hdl:27490
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].866 918 6494 I mtkpower_client: ret_hdl:27491
05-19 [Link].867 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:27491 hint:-1
pid:918 duration:0 => ret_hdl:27491
05-19 [Link].867 479 1594 I libPowerHal: [PE] scn:9 hdl:27491
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].979 918 6489 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].998 918 6489 I mtkpower_client: perf_lock_rel, hdl:27491,
tid:6489
05-19 [Link].998 918 6489 I mtkpower_client: perf_lock_rel, hdl:27490,
tid:6489
05-19 [Link].998 918 6489 I mtkpower_client: perf_lock_rel, hdl:27489,
tid:6489
05-19 [Link].998 918 6543 I mtkpower_client: perf_lock_rel, hdl:27486,
tid:6543
05-19 [Link].998 479 1594 I libPowerHal: [PD] scn:9 hdl:27491
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].998 918 6543 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6543
05-19 [Link].000 918 6543 I mtkpower_client: ret_hdl:27492
05-19 [Link].000 918 6543 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6543
05-19 [Link].000 918 6489 I mtkpower_client: perf_lock_rel, hdl:27485,
tid:6489
05-19 [Link].000 918 6489 I mtkpower_client: perf_lock_rel, hdl:27484,
tid:6489
05-19 [Link].001 918 6489 I mtkpower_client: perf_lock_rel, hdl:27479,
tid:6489
05-19 [Link].001 479 1594 I libPowerHal: [PD] scn:8 hdl:27490
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].001 918 6489 I mtkpower_client: perf_lock_rel, hdl:27477,
tid:6489
05-19 [Link].001 918 6489 I mtkpower_client: perf_lock_rel, hdl:27470,
tid:6489
05-19 [Link].001 918 6489 I mtkpower_client: perf_lock_rel, hdl:27469,
tid:6489
05-19 [Link].002 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:27492 hint:-1
pid:918 duration:0 => ret_hdl:27492
05-19 [Link].028 479 1594 I libPowerHal: [PE] scn:9 hdl:27492
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].030 479 1594 I libPowerHal: [PD] scn:7 hdl:27486
lock_user:[email protected] pid:918 tid:6544 dur:0
05-19 [Link].037 479 1594 I libPowerHal: [PD] scn:6 hdl:27489
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].038 918 6543 I mtkpower_client: ret_hdl:27493
05-19 [Link].038 918 6543 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6543
05-19 [Link].039 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27493 hint:-1
pid:918 duration:0 => ret_hdl:27493
05-19 [Link].039 479 1594 I libPowerHal: [PE] scn:4 hdl:27493
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].041 479 1594 I libPowerHal: [PD] scn:5 hdl:27485
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].045 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27494 hint:-1
pid:918 duration:0 => ret_hdl:27494
05-19 [Link].045 479 1594 I libPowerHal: [PE] scn:6 hdl:27494
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].045 918 6543 I mtkpower_client: ret_hdl:27494
05-19 [Link].046 479 1594 I libPowerHal: [PD] scn:3 hdl:27484
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].048 479 1594 I libPowerHal: [PD] scn:2 hdl:27479
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].048 479 1594 I libPowerHal: [PD] scn:1 hdl:27477
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].049 479 1594 I libPowerHal: [PD] scn:0 hdl:27470
lock_user:[email protected] pid:918 tid:6494 dur:0
05-19 [Link].160 918 6543 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6543
05-19 [Link].161 918 6543 I mtkpower_client: ret_hdl:27495
05-19 [Link].161 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27495 hint:-1
pid:918 duration:0 => ret_hdl:27495
05-19 [Link].161 479 1594 I libPowerHal: [PE] scn:0 hdl:27495
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].232 918 6543 I mtkpower_client: perf_lock_rel, hdl:27495,
tid:6543
05-19 [Link].233 479 1594 I libPowerHal: [PD] scn:0 hdl:27495
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].278 918 6543 I mtkpower_client: perf_lock_rel, hdl:27494,
tid:6543
05-19 [Link].279 918 6543 I mtkpower_client: perf_lock_rel, hdl:27493,
tid:6543
05-19 [Link].279 479 1594 I libPowerHal: [PD] scn:6 hdl:27494
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].280 479 1594 I libPowerHal: [PD] scn:4 hdl:27493
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].476 918 5020 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].477 918 5020 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].482 918 13399 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].483 918 13399 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].483 918 13399 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].484 918 13399 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].485 918 13399 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].518 918 6585 E VDO_LOG : GetDecoderAPI hWrapper 0xea2cf810
05-19 [Link].518 918 6585 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].518 918 6585 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].518 918 6585 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].519 918 6585 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 35187
05-19 [Link].519 918 6585 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe42f2000
05-19 [Link].519 918 6585 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].531 918 6591 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6591
05-19 [Link].532 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27501 hint:-1
pid:918 duration:0 => ret_hdl:27501
05-19 [Link].532 479 1594 I libPowerHal: [PE] scn:1 hdl:27501
lock_user:[email protected] pid:918 tid:6591 dur:0
05-19 [Link].533 918 6591 I mtkpower_client: ret_hdl:27501
05-19 [Link].563 918 6585 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].563 918 6585 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].563 918 6585 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].563 918 6585 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].563 918 6585 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].576 918 6543 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6543
05-19 [Link].577 918 6543 I mtkpower_client: ret_hdl:27502
05-19 [Link].577 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27502 hint:-1
pid:918 duration:0 => ret_hdl:27502
05-19 [Link].577 479 1594 I libPowerHal: [PE] scn:2 hdl:27502
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].729 918 6537 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].752 918 6537 I mtkpower_client: perf_lock_rel, hdl:27495,
tid:6537
05-19 [Link].753 918 6537 I mtkpower_client: perf_lock_rel, hdl:27494,
tid:6537
05-19 [Link].754 918 6537 I mtkpower_client: perf_lock_rel, hdl:27502,
tid:6537
05-19 [Link].754 918 6537 I mtkpower_client: perf_lock_rel, hdl:27492,
tid:6537
05-19 [Link].754 918 6537 I mtkpower_client: perf_lock_rel, hdl:27486,
tid:6537
05-19 [Link].755 479 1594 I libPowerHal: [PD] scn:2 hdl:27502
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].756 479 1594 I libPowerHal: [PD] scn:9 hdl:27492
lock_user:[email protected] pid:918 tid:6543 dur:0
05-19 [Link].875 918 6590 I mtkpower_client: perf_lock_rel, hdl:27501,
tid:6590
05-19 [Link].875 918 6590 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6590
05-19 [Link].876 479 1594 I libPowerHal: [PD] scn:1 hdl:27501
lock_user:[email protected] pid:918 tid:6591 dur:0
05-19 [Link].876 918 6590 I mtkpower_client: ret_hdl:27503
05-19 [Link].876 918 6590 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6590
05-19 [Link].876 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27503 hint:-1
pid:918 duration:0 => ret_hdl:27503
05-19 [Link].876 479 1594 I libPowerHal: [PE] scn:2 hdl:27503
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].877 918 6590 I mtkpower_client: ret_hdl:27504
05-19 [Link].877 918 6590 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6590
05-19 [Link].877 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27504 hint:-1
pid:918 duration:0 => ret_hdl:27504
05-19 [Link].877 479 1594 I libPowerHal: [PE] scn:1 hdl:27504
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].878 918 6590 I mtkpower_client: ret_hdl:27505
05-19 [Link].878 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27505 hint:-1
pid:918 duration:0 => ret_hdl:27505
05-19 [Link].878 479 1594 I libPowerHal: [PE] scn:3 hdl:27505
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].984 918 6590 I mtkpower_client: perf_lock_rel, hdl:27505,
tid:6590
05-19 [Link].985 479 1594 I libPowerHal: [PD] scn:3 hdl:27505
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].341 918 6590 I mtkpower_client: perf_lock_rel, hdl:27504,
tid:6590
05-19 [Link].342 479 1594 I libPowerHal: [PD] scn:1 hdl:27504
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].480 918 1820 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].480 918 1820 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].486 918 1820 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].486 918 1820 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].487 918 13399 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].488 918 1820 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].489 918 11717 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].541 918 6633 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].542 918 6633 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].542 918 6633 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].543 918 6633 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].543 918 6633 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 19919
05-19 [Link].543 918 6633 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde5dc000
05-19 [Link].543 918 6633 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].549 918 6640 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6640
05-19 [Link].550 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27509 hint:-1
pid:918 duration:0 => ret_hdl:27509
05-19 [Link].550 479 1594 I libPowerHal: [PE] scn:0 hdl:27509
lock_user:[email protected] pid:918 tid:6640 dur:0
05-19 [Link].550 918 6640 I mtkpower_client: ret_hdl:27509
05-19 [Link].582 918 6633 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].582 918 6633 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].582 918 6633 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].582 918 6633 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].582 918 6633 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].601 918 6590 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6590
05-19 [Link].602 918 6590 I mtkpower_client: ret_hdl:27510
05-19 [Link].602 918 6590 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6590
05-19 [Link].602 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27510 hint:-1
pid:918 duration:0 => ret_hdl:27510
05-19 [Link].603 479 1594 I libPowerHal: [PE] scn:4 hdl:27510
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].615 918 6590 I mtkpower_client: ret_hdl:27511
05-19 [Link].615 918 6590 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6590
05-19 [Link].616 918 6590 I mtkpower_client: ret_hdl:27512
05-19 [Link].620 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27511 hint:-1
pid:918 duration:0 => ret_hdl:27511
05-19 [Link].620 479 1594 I libPowerHal: [PE] scn:5 hdl:27511
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].625 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27512 hint:-1
pid:918 duration:0 => ret_hdl:27512
05-19 [Link].625 479 1594 I libPowerHal: [PE] scn:6 hdl:27512
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].840 918 6590 I mtkpower_client: perf_lock_rel, hdl:27512,
tid:6590
05-19 [Link].841 479 1594 I libPowerHal: [PD] scn:6 hdl:27512
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].891 918 6590 I mtkpower_client: perf_lock_rel, hdl:27511,
tid:6590
05-19 [Link].892 479 1594 I libPowerHal: [PD] scn:5 hdl:27511
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].968 918 6590 I mtkpower_client: perf_lock_rel, hdl:27510,
tid:6590
05-19 [Link].969 479 1594 I libPowerHal: [PD] scn:4 hdl:27510
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].380 918 6584 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].420 918 6584 I mtkpower_client: perf_lock_rel, hdl:27512,
tid:6584
05-19 [Link].421 918 6584 I mtkpower_client: perf_lock_rel, hdl:27511,
tid:6584
05-19 [Link].421 918 6584 I mtkpower_client: perf_lock_rel, hdl:27510,
tid:6584
05-19 [Link].421 918 6584 I mtkpower_client: perf_lock_rel, hdl:27503,
tid:6584
05-19 [Link].421 918 6584 I mtkpower_client: perf_lock_rel, hdl:27501,
tid:6584
05-19 [Link].423 479 1594 I libPowerHal: [PD] scn:2 hdl:27503
lock_user:[email protected] pid:918 tid:6590 dur:0
05-19 [Link].438 918 6639 I mtkpower_client: perf_lock_rel, hdl:27509,
tid:6639
05-19 [Link].438 918 6639 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6639
05-19 [Link].439 479 1594 I libPowerHal: [PD] scn:0 hdl:27509
lock_user:[email protected] pid:918 tid:6640 dur:0
05-19 [Link].440 918 6639 I mtkpower_client: ret_hdl:27515
05-19 [Link].454 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27515 hint:-1
pid:918 duration:0 => ret_hdl:27515
05-19 [Link].455 479 1594 I libPowerHal: [PE] scn:1 hdl:27515
lock_user:[email protected] pid:918 tid:6639 dur:0
05-19 [Link].024 918 1820 E OMXNodeInstance:
setParameter(0xea44d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].025 918 1820 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].028 918 1820 E MtkOmxVdecEx: [0xea44d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].028 918 1820 E OMXNodeInstance:
setConfig(0xea44d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].029 918 1820 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].029 918 1820 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 1820 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].070 918 6693 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].071 918 6693 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].071 918 6693 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].071 918 6693 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].071 918 6693 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 53988
05-19 [Link].071 918 6693 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].071 918 6693 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].075 918 6703 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6703
05-19 [Link].076 918 6703 I mtkpower_client: ret_hdl:27521
05-19 [Link].076 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27521 hint:-1
pid:918 duration:0 => ret_hdl:27521
05-19 [Link].076 479 1594 I libPowerHal: [PE] scn:2 hdl:27521
lock_user:[email protected] pid:918 tid:6703 dur:0
05-19 [Link].107 918 6693 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].107 918 6693 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].107 918 6693 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].107 918 6693 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].107 918 6693 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].274 918 6631 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].313 918 6631 I mtkpower_client: perf_lock_rel, hdl:27515,
tid:6631
05-19 [Link].314 918 6631 I mtkpower_client: perf_lock_rel, hdl:27509,
tid:6631
05-19 [Link].314 479 1594 I libPowerHal: [PD] scn:1 hdl:27515
lock_user:[email protected] pid:918 tid:6639 dur:0
05-19 [Link].427 918 6699 I mtkpower_client: perf_lock_rel, hdl:27521,
tid:6699
05-19 [Link].427 918 6699 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6699
05-19 [Link].428 479 1594 I libPowerHal: [PD] scn:2 hdl:27521
lock_user:[email protected] pid:918 tid:6703 dur:0
05-19 [Link].429 918 6699 I mtkpower_client: ret_hdl:27522
05-19 [Link].430 918 6699 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6699
05-19 [Link].430 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27522 hint:-1
pid:918 duration:0 => ret_hdl:27522
05-19 [Link].430 479 1594 I libPowerHal: [PE] scn:1 hdl:27522
lock_user:[email protected] pid:918 tid:6699 dur:0
05-19 [Link].431 918 6699 I mtkpower_client: ret_hdl:27523
05-19 [Link].432 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27523 hint:-1
pid:918 duration:0 => ret_hdl:27523
05-19 [Link].432 479 1594 I libPowerHal: [PE] scn:2 hdl:27523
lock_user:[email protected] pid:918 tid:6699 dur:0
05-19 [Link].494 918 6699 I mtkpower_client: perf_lock_rel, hdl:27523,
tid:6699
05-19 [Link].495 479 1594 I libPowerHal: [PD] scn:2 hdl:27523
lock_user:[email protected] pid:918 tid:6699 dur:0
05-19 [Link].904 918 11689 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].904 918 11689 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].907 918 11689 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].907 918 11689 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].908 918 11689 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].909 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].910 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].949 918 6767 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].949 918 6767 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].949 918 6767 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].950 918 6767 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].950 918 6767 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 59319
05-19 [Link].950 918 6767 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf1d2000
05-19 [Link].950 918 6767 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].951 918 6772 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6772
05-19 [Link].952 918 6772 I mtkpower_client: ret_hdl:27529
05-19 [Link].952 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27529 hint:-1
pid:918 duration:0 => ret_hdl:27529
05-19 [Link].952 479 1594 I libPowerHal: [PE] scn:0 hdl:27529
lock_user:[email protected] pid:918 tid:6772 dur:0
05-19 [Link].974 918 6767 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].974 918 6767 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].974 918 6767 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].974 918 6767 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].974 918 6767 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].205 918 6692 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].213 918 6692 I mtkpower_client: perf_lock_rel, hdl:27523,
tid:6692
05-19 [Link].214 918 6692 I mtkpower_client: perf_lock_rel, hdl:27522,
tid:6692
05-19 [Link].214 918 6692 I mtkpower_client: perf_lock_rel, hdl:27521,
tid:6692
05-19 [Link].215 479 1594 I libPowerHal: [PD] scn:1 hdl:27522
lock_user:[email protected] pid:918 tid:6699 dur:0
05-19 [Link].319 918 6771 I mtkpower_client: perf_lock_rel, hdl:27529,
tid:6771
05-19 [Link].319 918 6771 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6771
05-19 [Link].320 479 1594 I libPowerHal: [PD] scn:0 hdl:27529
lock_user:[email protected] pid:918 tid:6772 dur:0
05-19 [Link].321 918 6771 I mtkpower_client: ret_hdl:27530
05-19 [Link].321 918 6771 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6771
05-19 [Link].322 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27530 hint:-1
pid:918 duration:0 => ret_hdl:27530
05-19 [Link].322 479 1594 I libPowerHal: [PE] scn:0 hdl:27530
lock_user:[email protected] pid:918 tid:6771 dur:0
05-19 [Link].323 918 6771 I mtkpower_client: ret_hdl:27531
05-19 [Link].323 918 6771 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6771
05-19 [Link].324 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27531 hint:-1
pid:918 duration:0 => ret_hdl:27531
05-19 [Link].324 479 1594 I libPowerHal: [PE] scn:1 hdl:27531
lock_user:[email protected] pid:918 tid:6771 dur:0
05-19 [Link].325 918 6771 I mtkpower_client: ret_hdl:27532
05-19 [Link].325 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27532 hint:-1
pid:918 duration:0 => ret_hdl:27532
05-19 [Link].325 479 1594 I libPowerHal: [PE] scn:3 hdl:27532
lock_user:[email protected] pid:918 tid:6771 dur:0
05-19 [Link].400 918 6771 I mtkpower_client: perf_lock_rel, hdl:27532,
tid:6771
05-19 [Link].401 479 1594 I libPowerHal: [PD] scn:3 hdl:27532
lock_user:[email protected] pid:918 tid:6771 dur:0
05-19 [Link].553 918 6771 I mtkpower_client: perf_lock_rel, hdl:27531,
tid:6771
05-19 [Link].554 479 1594 I libPowerHal: [PD] scn:1 hdl:27531
lock_user:[email protected] pid:918 tid:6771 dur:0
05-19 [Link].805 918 1784 E OMXNodeInstance:
setParameter(0xea44d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].805 918 1784 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].809 918 1784 E MtkOmxVdecEx: [0xea44d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].809 918 1784 E OMXNodeInstance:
setConfig(0xea44d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].809 918 1784 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].809 918 1784 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].810 918 6021 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].842 918 6816 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].842 918 6816 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].842 918 6816 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].843 918 6816 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].843 918 6816 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21362
05-19 [Link].843 918 6816 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].843 918 6816 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].847 918 6822 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6822
05-19 [Link].847 918 6822 I mtkpower_client: ret_hdl:27538
05-19 [Link].848 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27538 hint:-1
pid:918 duration:0 => ret_hdl:27538
05-19 [Link].848 479 1594 I libPowerHal: [PE] scn:2 hdl:27538
lock_user:[email protected] pid:918 tid:6822 dur:0
05-19 [Link].866 918 6816 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].866 918 6816 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].866 918 6816 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].866 918 6816 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].866 918 6816 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: selectOutput new
bestOutput 13 criteria 0 0 0 0 0 0 0 2
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: getOutput() stream 3
selected devices {type:0x4,@:}, output 13
05-19 [Link].077 918 6766 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].098 918 6766 I mtkpower_client: perf_lock_rel, hdl:27532,
tid:6766
05-19 [Link].100 918 6766 I mtkpower_client: perf_lock_rel, hdl:27531,
tid:6766
05-19 [Link].100 918 6766 I mtkpower_client: perf_lock_rel, hdl:27530,
tid:6766
05-19 [Link].100 918 6766 I mtkpower_client: perf_lock_rel, hdl:27529,
tid:6766
05-19 [Link].106 479 1594 I libPowerHal: [PD] scn:0 hdl:27530
lock_user:[email protected] pid:918 tid:6771 dur:0
05-19 [Link].159 918 6820 I mtkpower_client: perf_lock_rel, hdl:27538,
tid:6820
05-19 [Link].159 918 6820 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6820
05-19 [Link].160 479 1594 I libPowerHal: [PD] scn:2 hdl:27538
lock_user:[email protected] pid:918 tid:6822 dur:0
05-19 [Link].161 918 6820 I mtkpower_client: ret_hdl:27539
05-19 [Link].161 918 6820 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6820
05-19 [Link].161 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27539 hint:-1
pid:918 duration:0 => ret_hdl:27539
05-19 [Link].161 479 1594 I libPowerHal: [PE] scn:0 hdl:27539
lock_user:[email protected] pid:918 tid:6820 dur:0
05-19 [Link].162 918 6820 I mtkpower_client: ret_hdl:27540
05-19 [Link].162 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27540 hint:-1
pid:918 duration:0 => ret_hdl:27540
05-19 [Link].162 479 1594 I libPowerHal: [PE] scn:2 hdl:27540
lock_user:[email protected] pid:918 tid:6820 dur:0
05-19 [Link].265 918 6820 I mtkpower_client: perf_lock_rel, hdl:27540,
tid:6820
05-19 [Link].267 479 1594 I libPowerHal: [PD] scn:2 hdl:27540
lock_user:[email protected] pid:918 tid:6820 dur:0
05-19 [Link].607 918 1784 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].607 918 1784 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].609 918 1784 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].610 918 1784 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].610 918 1784 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].610 918 1784 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].610 918 1784 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].648 918 6861 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].648 918 6861 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].648 918 6861 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].648 918 6861 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].648 918 6861 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 39523
05-19 [Link].648 918 6861 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf1e7000
05-19 [Link].648 918 6861 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].657 918 6866 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6866
05-19 [Link].657 918 6866 I mtkpower_client: ret_hdl:27546
05-19 [Link].657 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27546 hint:-1
pid:918 duration:0 => ret_hdl:27546
05-19 [Link].657 479 1594 I libPowerHal: [PE] scn:3 hdl:27546
lock_user:[email protected] pid:918 tid:6866 dur:0
05-19 [Link].676 918 6861 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].676 918 6861 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].676 918 6861 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].676 918 6861 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].676 918 6861 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].835 918 6815 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].854 918 6815 I mtkpower_client: perf_lock_rel, hdl:27540,
tid:6815
05-19 [Link].854 918 6815 I mtkpower_client: perf_lock_rel, hdl:27539,
tid:6815
05-19 [Link].859 479 1594 I libPowerHal: [PD] scn:0 hdl:27539
lock_user:[email protected] pid:918 tid:6820 dur:0
05-19 [Link].871 918 6865 I mtkpower_client: perf_lock_rel, hdl:27546,
tid:6865
05-19 [Link].872 918 6815 I mtkpower_client: perf_lock_rel, hdl:27538,
tid:6815
05-19 [Link].872 918 6865 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6865
05-19 [Link].874 479 1594 I libPowerHal: [PD] scn:3 hdl:27546
lock_user:[email protected] pid:918 tid:6866 dur:0
05-19 [Link].875 918 6865 I mtkpower_client: ret_hdl:27547
05-19 [Link].875 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27547 hint:-1
pid:918 duration:0 => ret_hdl:27547
05-19 [Link].875 479 1594 I libPowerHal: [PE] scn:0 hdl:27547
lock_user:[email protected] pid:918 tid:6865 dur:0
05-19 [Link].462 918 9097 E OMXNodeInstance:
setParameter(0xea44d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].462 918 9097 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].466 918 32757 E MtkOmxVdecEx: [0xea44d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].467 918 32757 E OMXNodeInstance:
setConfig(0xea44d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].467 918 5058 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].467 918 5058 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].468 918 32757 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].503 918 6910 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].504 918 6910 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].504 918 6910 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].510 918 6910 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].510 918 6910 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28192
05-19 [Link].510 918 6910 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].510 918 6910 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].520 918 6917 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6917
05-19 [Link].521 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27553 hint:-1
pid:918 duration:0 => ret_hdl:27553
05-19 [Link].521 918 6917 I mtkpower_client: ret_hdl:27553
05-19 [Link].521 479 1594 I libPowerHal: [PE] scn:3 hdl:27553
lock_user:[email protected] pid:918 tid:6917 dur:0
05-19 [Link].534 918 6910 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].534 918 6910 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].534 918 6910 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].534 918 6910 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].534 918 6910 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].741 918 6916 I mtkpower_client: perf_lock_rel, hdl:27553,
tid:6916
05-19 [Link].742 918 6916 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6916
05-19 [Link].743 918 6916 I mtkpower_client: ret_hdl:27554
05-19 [Link].743 479 1594 I libPowerHal: [PD] scn:3 hdl:27553
lock_user:[email protected] pid:918 tid:6917 dur:0
05-19 [Link].745 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27554 hint:-1
pid:918 duration:0 => ret_hdl:27554
05-19 [Link].745 479 1594 I libPowerHal: [PE] scn:2 hdl:27554
lock_user:[email protected] pid:918 tid:6916 dur:0
05-19 [Link].763 918 6860 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].780 918 6860 I mtkpower_client: perf_lock_rel, hdl:27547,
tid:6860
05-19 [Link].780 918 6860 I mtkpower_client: perf_lock_rel, hdl:27546,
tid:6860
05-19 [Link].785 479 1594 I libPowerHal: [PD] scn:0 hdl:27547
lock_user:[email protected] pid:918 tid:6865 dur:0
05-19 [Link].840 918 6916 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6916
05-19 [Link].841 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27556 hint:-1
pid:918 duration:0 => ret_hdl:27556
05-19 [Link].841 479 1594 I libPowerHal: [PE] scn:1 hdl:27556
lock_user:[email protected] pid:918 tid:6916 dur:0
05-19 [Link].841 918 6916 I mtkpower_client: ret_hdl:27556
05-19 [Link].944 918 6916 I mtkpower_client: perf_lock_rel, hdl:27556,
tid:6916
05-19 [Link].945 479 1594 I libPowerHal: [PD] scn:1 hdl:27556
lock_user:[email protected] pid:918 tid:6916 dur:0
05-19 [Link].970 918 13399 E OMXNodeInstance:
setParameter(0xea156004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].970 918 1784 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].973 918 11716 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].973 918 11716 E OMXNodeInstance:
setConfig(0xea156004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].973 918 13399 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].973 918 1784 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].974 918 5033 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].054 918 6957 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].058 918 6957 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].059 918 6957 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].060 918 6957 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].060 918 6957 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 39523
05-19 [Link].060 918 6957 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf544000
05-19 [Link].060 918 6957 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].062 918 6964 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6964
05-19 [Link].064 918 6964 I mtkpower_client: ret_hdl:27561
05-19 [Link].064 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27561 hint:-1
pid:918 duration:0 => ret_hdl:27561
05-19 [Link].064 479 1594 I libPowerHal: [PE] scn:1 hdl:27561
lock_user:[email protected] pid:918 tid:6964 dur:0
05-19 [Link].074 918 6957 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].074 918 6957 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].074 918 6957 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].074 918 6957 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].075 918 6957 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].137 918 6908 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].161 918 6908 I mtkpower_client: perf_lock_rel, hdl:27556,
tid:6908
05-19 [Link].163 918 6908 I mtkpower_client: perf_lock_rel, hdl:27554,
tid:6908
05-19 [Link].164 479 1594 I libPowerHal: [PD] scn:2 hdl:27554
lock_user:[email protected] pid:918 tid:6916 dur:0
05-19 [Link].165 918 6908 I mtkpower_client: perf_lock_rel, hdl:27553,
tid:6908
05-19 [Link].325 918 6963 I mtkpower_client: perf_lock_rel, hdl:27561,
tid:6963
05-19 [Link].325 918 6963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6963
05-19 [Link].326 479 1594 I libPowerHal: [PD] scn:1 hdl:27561
lock_user:[email protected] pid:918 tid:6964 dur:0
05-19 [Link].327 918 6963 I mtkpower_client: ret_hdl:27562
05-19 [Link].327 918 6963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6963
05-19 [Link].327 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27562 hint:-1
pid:918 duration:0 => ret_hdl:27562
05-19 [Link].327 479 1594 I libPowerHal: [PE] scn:2 hdl:27562
lock_user:[email protected] pid:918 tid:6963 dur:0
05-19 [Link].328 918 6963 I mtkpower_client: ret_hdl:27563
05-19 [Link].328 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27563 hint:-1
pid:918 duration:0 => ret_hdl:27563
05-19 [Link].328 479 1594 I libPowerHal: [PE] scn:1 hdl:27563
lock_user:[email protected] pid:918 tid:6963 dur:0
05-19 [Link].368 918 6963 I mtkpower_client: perf_lock_rel, hdl:27563,
tid:6963
05-19 [Link].369 479 1594 I libPowerHal: [PD] scn:1 hdl:27563
lock_user:[email protected] pid:918 tid:6963 dur:0
05-19 [Link].675 918 918 E OMXNodeInstance:
setParameter(0xea44d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].676 918 918 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].681 918 32757 E MtkOmxVdecEx: [0xea44d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].682 918 32757 E OMXNodeInstance:
setConfig(0xea44d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].682 918 32757 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].683 918 32757 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].684 918 32757 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].738 918 7003 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].739 918 7003 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].739 918 7003 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].741 918 7003 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].741 918 7003 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28192
05-19 [Link].741 918 7003 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].741 918 7003 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].747 918 7008 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7008
05-19 [Link].751 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27571 hint:-1
pid:918 duration:0 => ret_hdl:27571
05-19 [Link].751 479 1594 I libPowerHal: [PE] scn:1 hdl:27571
lock_user:[email protected] pid:918 tid:7008 dur:0
05-19 [Link].752 918 7008 I mtkpower_client: ret_hdl:27571
05-19 [Link].785 918 7003 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].786 918 7003 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].786 918 7003 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].786 918 7003 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].786 918 7003 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].863 918 6963 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:6963
05-19 [Link].865 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27572 hint:-1
pid:918 duration:0 => ret_hdl:27572
05-19 [Link].865 479 1594 I libPowerHal: [PE] scn:3 hdl:27572
lock_user:[email protected] pid:918 tid:6963 dur:0
05-19 [Link].865 918 6963 I mtkpower_client: ret_hdl:27572
05-19 [Link].918 1303 3947 E _V_AS.AudioService: isMotorModeSupportPlayback
pkgname is [Link]
05-19 [Link].968 918 6956 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].010 918 6956 I mtkpower_client: perf_lock_rel, hdl:27572,
tid:6956
05-19 [Link].011 918 6956 I mtkpower_client: perf_lock_rel, hdl:27562,
tid:6956
05-19 [Link].011 918 6956 I mtkpower_client: perf_lock_rel, hdl:27561,
tid:6956
05-19 [Link].011 479 1594 I libPowerHal: [PD] scn:3 hdl:27572
lock_user:[email protected] pid:918 tid:6963 dur:0
05-19 [Link].020 479 1594 I libPowerHal: [PD] scn:2 hdl:27562
lock_user:[email protected] pid:918 tid:6963 dur:0
05-19 [Link].032 918 7007 I mtkpower_client: perf_lock_rel, hdl:27571,
tid:7007
05-19 [Link].032 918 7007 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7007
05-19 [Link].033 479 1594 I libPowerHal: [PD] scn:1 hdl:27571
lock_user:[email protected] pid:918 tid:7008 dur:0
05-19 [Link].034 918 7007 I mtkpower_client: ret_hdl:27573
05-19 [Link].034 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27573 hint:-1
pid:918 duration:0 => ret_hdl:27573
05-19 [Link].034 479 1594 I libPowerHal: [PE] scn:2 hdl:27573
lock_user:[email protected] pid:918 tid:7007 dur:0
05-19 [Link].368 918 5020 E OMXNodeInstance:
setParameter(0xea156004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].369 918 5020 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].374 918 5020 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].374 918 5020 E OMXNodeInstance:
setConfig(0xea156004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].375 918 5020 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].377 918 5020 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].377 918 5020 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].411 918 7047 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].411 918 7047 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].411 918 7047 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].411 918 7047 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].411 918 7047 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 101257
05-19 [Link].411 918 7047 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0b5d000
05-19 [Link].411 918 7047 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].419 918 7054 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7054
05-19 [Link].422 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27579 hint:-1
pid:918 duration:0 => ret_hdl:27579
05-19 [Link].422 479 1594 I libPowerHal: [PE] scn:3 hdl:27579
lock_user:[email protected] pid:918 tid:7054 dur:0
05-19 [Link].422 918 7054 I mtkpower_client: ret_hdl:27579
05-19 [Link].428 918 7047 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].428 918 7047 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].428 918 7047 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].428 918 7047 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].428 918 7047 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].633 918 7053 I mtkpower_client: perf_lock_rel, hdl:27579,
tid:7053
05-19 [Link].633 918 7053 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7053
05-19 [Link].634 479 1594 I libPowerHal: [PD] scn:3 hdl:27579
lock_user:[email protected] pid:918 tid:7054 dur:0
05-19 [Link].635 918 7002 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].636 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27580 hint:-1
pid:918 duration:0 => ret_hdl:27580
05-19 [Link].636 479 1594 I libPowerHal: [PE] scn:1 hdl:27580
lock_user:[email protected] pid:918 tid:7053 dur:0
05-19 [Link].637 918 7053 I mtkpower_client: ret_hdl:27580
05-19 [Link].654 918 7002 I mtkpower_client: perf_lock_rel, hdl:27573,
tid:7002
05-19 [Link].655 918 7002 I mtkpower_client: perf_lock_rel, hdl:27571,
tid:7002
05-19 [Link].655 479 1594 I libPowerHal: [PD] scn:2 hdl:27573
lock_user:[email protected] pid:918 tid:7007 dur:0
05-19 [Link].448 918 5058 E OMXNodeInstance:
setParameter(0xea44d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].448 918 5058 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].452 918 5058 E MtkOmxVdecEx: [0xea44d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].453 918 5058 E OMXNodeInstance:
setConfig(0xea44d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].453 918 11716 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].453 918 9097 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].453 918 918 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].489 918 7095 E VDO_LOG : GetDecoderAPI hWrapper 0xea09d810
05-19 [Link].490 918 7095 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].490 918 7095 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].491 918 7095 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].491 918 7095 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 30556
05-19 [Link].492 918 7095 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe245f000
05-19 [Link].492 918 7095 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].494 918 7102 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7102
05-19 [Link].494 918 7102 I mtkpower_client: ret_hdl:27586
05-19 [Link].499 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27586 hint:-1
pid:918 duration:0 => ret_hdl:27586
05-19 [Link].499 479 1594 I libPowerHal: [PE] scn:3 hdl:27586
lock_user:[email protected] pid:918 tid:7102 dur:0
05-19 [Link].510 918 7095 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].510 918 7095 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].510 918 7095 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].510 918 7095 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].510 918 7095 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].720 918 7046 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].730 918 7046 I mtkpower_client: perf_lock_rel, hdl:27580,
tid:7046
05-19 [Link].731 479 1594 I libPowerHal: [PD] scn:1 hdl:27580
lock_user:[email protected] pid:918 tid:7053 dur:0
05-19 [Link].732 918 7046 I mtkpower_client: perf_lock_rel, hdl:27579,
tid:7046
05-19 [Link].844 918 7101 I mtkpower_client: perf_lock_rel, hdl:27586,
tid:7101
05-19 [Link].845 918 7101 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7101
05-19 [Link].846 479 1594 I libPowerHal: [PD] scn:3 hdl:27586
lock_user:[email protected] pid:918 tid:7102 dur:0
05-19 [Link].851 918 7101 I mtkpower_client: ret_hdl:27587
05-19 [Link].851 918 7101 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7101
05-19 [Link].852 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27587 hint:-1
pid:918 duration:0 => ret_hdl:27587
05-19 [Link].852 479 1594 I libPowerHal: [PE] scn:1 hdl:27587
lock_user:[email protected] pid:918 tid:7101 dur:0
05-19 [Link].853 918 7101 I mtkpower_client: ret_hdl:27588
05-19 [Link].853 918 7101 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7101
05-19 [Link].853 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27588 hint:-1
pid:918 duration:0 => ret_hdl:27588
05-19 [Link].853 479 1594 I libPowerHal: [PE] scn:2 hdl:27588
lock_user:[email protected] pid:918 tid:7101 dur:0
05-19 [Link].855 918 7101 I mtkpower_client: ret_hdl:27589
05-19 [Link].855 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27589 hint:-1
pid:918 duration:0 => ret_hdl:27589
05-19 [Link].855 479 1594 I libPowerHal: [PE] scn:3 hdl:27589
lock_user:[email protected] pid:918 tid:7101 dur:0
05-19 [Link].025 918 7101 I mtkpower_client: perf_lock_rel, hdl:27589,
tid:7101
05-19 [Link].026 479 1594 I libPowerHal: [PD] scn:3 hdl:27589
lock_user:[email protected] pid:918 tid:7101 dur:0
05-19 [Link].099 918 7101 I mtkpower_client: perf_lock_rel, hdl:27588,
tid:7101
05-19 [Link].100 479 1594 I libPowerHal: [PD] scn:2 hdl:27588
lock_user:[email protected] pid:918 tid:7101 dur:0
05-19 [Link].679 918 13399 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].679 918 13399 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].682 918 1960 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].682 918 1960 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].682 918 5020 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].683 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].683 918 1721 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].714 918 7148 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].714 918 7148 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].714 918 7148 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].715 918 7148 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].715 918 7148 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 31320
05-19 [Link].715 918 7148 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2b25000
05-19 [Link].715 918 7148 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].723 918 7153 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7153
05-19 [Link].724 918 7153 I mtkpower_client: ret_hdl:27595
05-19 [Link].724 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27595 hint:-1
pid:918 duration:0 => ret_hdl:27595
05-19 [Link].725 479 1594 I libPowerHal: [PE] scn:3 hdl:27595
lock_user:[email protected] pid:918 tid:7153 dur:0
05-19 [Link].747 918 7148 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].747 918 7148 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].747 918 7148 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].747 918 7148 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].748 918 7148 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].966 918 7094 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].992 918 7094 I mtkpower_client: perf_lock_rel, hdl:27589,
tid:7094
05-19 [Link].993 918 7094 I mtkpower_client: perf_lock_rel, hdl:27588,
tid:7094
05-19 [Link].994 918 7094 I mtkpower_client: perf_lock_rel, hdl:27587,
tid:7094
05-19 [Link].994 918 7094 I mtkpower_client: perf_lock_rel, hdl:27586,
tid:7094
05-19 [Link].996 918 7152 I mtkpower_client: perf_lock_rel, hdl:27595,
tid:7152
05-19 [Link].998 918 7152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7152
05-19 [Link].004 479 1594 I libPowerHal: [PD] scn:1 hdl:27587
lock_user:[email protected] pid:918 tid:7101 dur:0
05-19 [Link].005 918 7152 I mtkpower_client: ret_hdl:27596
05-19 [Link].005 918 7152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7152
05-19 [Link].006 918 7152 I mtkpower_client: ret_hdl:27597
05-19 [Link].007 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27596 hint:-1
pid:918 duration:0 => ret_hdl:27596
05-19 [Link].007 479 1594 I libPowerHal: [PE] scn:2 hdl:27596
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].009 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27597 hint:-1
pid:918 duration:0 => ret_hdl:27597
05-19 [Link].009 479 1594 I libPowerHal: [PE] scn:1 hdl:27597
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].010 479 1594 I libPowerHal: [PD] scn:3 hdl:27595
lock_user:[email protected] pid:918 tid:7153 dur:0
05-19 [Link].209 918 7152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7152
05-19 [Link].210 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27598 hint:-1
pid:918 duration:0 => ret_hdl:27598
05-19 [Link].210 479 1594 I libPowerHal: [PE] scn:3 hdl:27598
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].211 918 7152 I mtkpower_client: ret_hdl:27598
05-19 [Link].211 918 7152 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7152
05-19 [Link].214 918 7152 I mtkpower_client: ret_hdl:27599
05-19 [Link].214 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27599 hint:-1
pid:918 duration:0 => ret_hdl:27599
05-19 [Link].214 479 1594 I libPowerHal: [PE] scn:4 hdl:27599
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].287 918 7152 I mtkpower_client: perf_lock_rel, hdl:27599,
tid:7152
05-19 [Link].288 479 1594 I libPowerHal: [PD] scn:4 hdl:27599
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].384 918 7152 I mtkpower_client: perf_lock_rel, hdl:27598,
tid:7152
05-19 [Link].385 479 1594 I libPowerHal: [PD] scn:3 hdl:27598
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].565 918 7152 I mtkpower_client: perf_lock_rel, hdl:27597,
tid:7152
05-19 [Link].566 479 1594 I libPowerHal: [PD] scn:1 hdl:27597
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].714 918 11689 E OMXNodeInstance:
setParameter(0xea44d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].714 918 5020 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].717 918 11689 E MtkOmxVdecEx: [0xea44d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].717 918 11689 E OMXNodeInstance:
setConfig(0xea44d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].717 918 11689 E OMXNodeInstance:
getParameter(0xea44d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].717 918 11689 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].718 918 11689 E OMXNodeInstance:
getConfig(0xea44d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].750 918 7195 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].751 918 7195 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].751 918 7195 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].752 918 7195 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].752 918 7195 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 58069
05-19 [Link].752 918 7195 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].752 918 7195 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].754 918 7201 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7201
05-19 [Link].756 918 7201 I mtkpower_client: ret_hdl:27605
05-19 [Link].756 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27605 hint:-1
pid:918 duration:0 => ret_hdl:27605
05-19 [Link].756 479 1594 I libPowerHal: [PE] scn:0 hdl:27605
lock_user:[email protected] pid:918 tid:7201 dur:0
05-19 [Link].765 918 7195 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].766 918 7195 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].766 918 7195 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].766 918 7195 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].766 918 7195 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].977 918 7146 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].996 918 7146 I mtkpower_client: perf_lock_rel, hdl:27599,
tid:7146
05-19 [Link].997 918 7146 I mtkpower_client: perf_lock_rel, hdl:27598,
tid:7146
05-19 [Link].998 918 7146 I mtkpower_client: perf_lock_rel, hdl:27597,
tid:7146
05-19 [Link].998 918 7146 I mtkpower_client: perf_lock_rel, hdl:27596,
tid:7146
05-19 [Link].998 918 7146 I mtkpower_client: perf_lock_rel, hdl:27595,
tid:7146
05-19 [Link].000 479 1594 I libPowerHal: [PD] scn:2 hdl:27596
lock_user:[email protected] pid:918 tid:7152 dur:0
05-19 [Link].166 918 7200 I mtkpower_client: perf_lock_rel, hdl:27605,
tid:7200
05-19 [Link].166 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].166 479 1594 I libPowerHal: [PD] scn:0 hdl:27605
lock_user:[email protected] pid:918 tid:7201 dur:0
05-19 [Link].167 918 7200 I mtkpower_client: ret_hdl:27606
05-19 [Link].167 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].167 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27606 hint:-1
pid:918 duration:0 => ret_hdl:27606
05-19 [Link].167 479 1594 I libPowerHal: [PE] scn:1 hdl:27606
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].168 918 7200 I mtkpower_client: ret_hdl:27607
05-19 [Link].168 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].168 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27607 hint:-1
pid:918 duration:0 => ret_hdl:27607
05-19 [Link].168 479 1594 I libPowerHal: [PE] scn:0 hdl:27607
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].169 918 7200 I mtkpower_client: ret_hdl:27608
05-19 [Link].169 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].169 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27608 hint:-1
pid:918 duration:0 => ret_hdl:27608
05-19 [Link].169 479 1594 I libPowerHal: [PE] scn:2 hdl:27608
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].170 918 7200 I mtkpower_client: ret_hdl:27609
05-19 [Link].170 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27609 hint:-1
pid:918 duration:0 => ret_hdl:27609
05-19 [Link].170 479 1594 I libPowerHal: [PE] scn:4 hdl:27609
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].278 918 7200 I mtkpower_client: perf_lock_rel, hdl:27609,
tid:7200
05-19 [Link].279 479 1594 I libPowerHal: [PD] scn:4 hdl:27609
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].423 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].424 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27610 hint:-1
pid:918 duration:0 => ret_hdl:27610
05-19 [Link].424 479 1594 I libPowerHal: [PE] scn:4 hdl:27610
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].425 918 7200 I mtkpower_client: ret_hdl:27610
05-19 [Link].520 918 7200 I mtkpower_client: perf_lock_rel, hdl:27610,
tid:7200
05-19 [Link].521 479 1594 I libPowerHal: [PD] scn:4 hdl:27610
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].744 918 7200 I mtkpower_client: perf_lock_rel, hdl:27608,
tid:7200
05-19 [Link].745 479 1594 I libPowerHal: [PD] scn:2 hdl:27608
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].892 918 7200 I mtkpower_client: perf_lock_rel, hdl:27607,
tid:7200
05-19 [Link].893 479 1594 I libPowerHal: [PD] scn:0 hdl:27607
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].969 918 11689 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].970 918 11689 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].975 918 1066 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].976 918 1066 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].977 918 1066 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].977 918 1066 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].978 918 1066 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].021 918 7240 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].021 918 7240 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].021 918 7240 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].024 918 7240 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].024 918 7240 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 39230
05-19 [Link].024 918 7240 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf7ee000
05-19 [Link].024 918 7240 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].027 918 7249 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7249
05-19 [Link].028 918 7249 I mtkpower_client: ret_hdl:27616
05-19 [Link].028 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27616 hint:-1
pid:918 duration:0 => ret_hdl:27616
05-19 [Link].028 479 1594 I libPowerHal: [PE] scn:3 hdl:27616
lock_user:[email protected] pid:918 tid:7249 dur:0
05-19 [Link].040 918 7240 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].040 918 7240 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].040 918 7240 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].040 918 7240 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].040 918 7240 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].064 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].065 918 7200 I mtkpower_client: ret_hdl:27617
05-19 [Link].065 918 7200 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7200
05-19 [Link].065 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27617 hint:-1
pid:918 duration:0 => ret_hdl:27617
05-19 [Link].065 479 1594 I libPowerHal: [PE] scn:2 hdl:27617
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].066 918 7200 I mtkpower_client: ret_hdl:27618
05-19 [Link].066 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27618 hint:-1
pid:918 duration:0 => ret_hdl:27618
05-19 [Link].066 479 1594 I libPowerHal: [PE] scn:4 hdl:27618
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].196 918 7200 I mtkpower_client: perf_lock_rel, hdl:27618,
tid:7200
05-19 [Link].197 479 1594 I libPowerHal: [PD] scn:4 hdl:27618
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].256 918 7194 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].269 918 7194 I mtkpower_client: perf_lock_rel, hdl:27610,
tid:7194
05-19 [Link].269 918 7194 I mtkpower_client: perf_lock_rel, hdl:27618,
tid:7194
05-19 [Link].269 918 7194 I mtkpower_client: perf_lock_rel, hdl:27617,
tid:7194
05-19 [Link].269 918 7194 I mtkpower_client: perf_lock_rel, hdl:27606,
tid:7194
05-19 [Link].269 918 7194 I mtkpower_client: perf_lock_rel, hdl:27605,
tid:7194
05-19 [Link].271 479 1594 I libPowerHal: [PD] scn:2 hdl:27617
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].272 479 1594 I libPowerHal: [PD] scn:1 hdl:27606
lock_user:[email protected] pid:918 tid:7200 dur:0
05-19 [Link].322 918 7248 I mtkpower_client: perf_lock_rel, hdl:27616,
tid:7248
05-19 [Link].323 918 7248 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7248
05-19 [Link].324 479 1594 I libPowerHal: [PD] scn:3 hdl:27616
lock_user:[email protected] pid:918 tid:7249 dur:0
05-19 [Link].325 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27619 hint:-1
pid:918 duration:0 => ret_hdl:27619
05-19 [Link].325 479 1594 I libPowerHal: [PE] scn:1 hdl:27619
lock_user:[email protected] pid:918 tid:7248 dur:0
05-19 [Link].326 918 7248 I mtkpower_client: ret_hdl:27619
05-19 [Link].326 918 7248 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7248
05-19 [Link].327 918 7248 I mtkpower_client: ret_hdl:27620
05-19 [Link].327 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27620 hint:-1
pid:918 duration:0 => ret_hdl:27620
05-19 [Link].327 479 1594 I libPowerHal: [PE] scn:2 hdl:27620
lock_user:[email protected] pid:918 tid:7248 dur:0
05-19 [Link].327 918 7248 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7248
05-19 [Link].328 918 7248 I mtkpower_client: ret_hdl:27621
05-19 [Link].328 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27621 hint:-1
pid:918 duration:0 => ret_hdl:27621
05-19 [Link].328 479 1594 I libPowerHal: [PE] scn:3 hdl:27621
lock_user:[email protected] pid:918 tid:7248 dur:0
05-19 [Link].400 918 7248 I mtkpower_client: perf_lock_rel, hdl:27621,
tid:7248
05-19 [Link].401 479 1594 I libPowerHal: [PD] scn:3 hdl:27621
lock_user:[email protected] pid:918 tid:7248 dur:0
05-19 [Link].486 918 7248 I mtkpower_client: perf_lock_rel, hdl:27620,
tid:7248
05-19 [Link].487 479 1594 I libPowerHal: [PD] scn:2 hdl:27620
lock_user:[email protected] pid:918 tid:7248 dur:0
05-19 [Link].008 918 11689 E OMXNodeInstance:
setParameter(0xea483004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].009 918 11689 E OMXNodeInstance:
getParameter(0xea483004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].011 918 918 E MtkOmxVdecEx: [0xea483000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].011 918 918 E OMXNodeInstance:
setConfig(0xea483004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].012 918 11689 E OMXNodeInstance:
getParameter(0xea483004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].012 918 5724 E OMXNodeInstance:
getConfig(0xea483004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].013 918 1721 E OMXNodeInstance:
getConfig(0xea483004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].092 918 7288 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].093 918 7288 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].093 918 7288 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].093 918 7288 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].094 918 7288 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 53974
05-19 [Link].094 918 7288 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].094 918 7288 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].097 918 7294 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7294
05-19 [Link].098 918 7294 I mtkpower_client: ret_hdl:27627
05-19 [Link].098 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27627 hint:-1
pid:918 duration:0 => ret_hdl:27627
05-19 [Link].098 479 1594 I libPowerHal: [PE] scn:2 hdl:27627
lock_user:[email protected] pid:918 tid:7294 dur:0
05-19 [Link].107 918 7288 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].107 918 7288 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].107 918 7288 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].107 918 7288 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].107 918 7288 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].307 918 7239 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].318 918 7239 I mtkpower_client: perf_lock_rel, hdl:27621,
tid:7239
05-19 [Link].321 918 7239 I mtkpower_client: perf_lock_rel, hdl:27620,
tid:7239
05-19 [Link].321 918 7239 I mtkpower_client: perf_lock_rel, hdl:27619,
tid:7239
05-19 [Link].321 918 7239 I mtkpower_client: perf_lock_rel, hdl:27616,
tid:7239
05-19 [Link].322 479 1594 I libPowerHal: [PD] scn:1 hdl:27619
lock_user:[email protected] pid:918 tid:7248 dur:0
05-19 [Link].356 918 7293 I mtkpower_client: perf_lock_rel, hdl:27627,
tid:7293
05-19 [Link].356 918 7293 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7293
05-19 [Link].357 479 1594 I libPowerHal: [PD] scn:2 hdl:27627
lock_user:[email protected] pid:918 tid:7294 dur:0
05-19 [Link].359 918 7293 I mtkpower_client: ret_hdl:27628
05-19 [Link].359 918 7293 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7293
05-19 [Link].359 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27628 hint:-1
pid:918 duration:0 => ret_hdl:27628
05-19 [Link].359 479 1594 I libPowerHal: [PE] scn:1 hdl:27628
lock_user:[email protected] pid:918 tid:7293 dur:0
05-19 [Link].360 918 7293 I mtkpower_client: ret_hdl:27629
05-19 [Link].360 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27629 hint:-1
pid:918 duration:0 => ret_hdl:27629
05-19 [Link].360 479 1594 I libPowerHal: [PE] scn:2 hdl:27629
lock_user:[email protected] pid:918 tid:7293 dur:0
05-19 [Link].421 918 7293 I mtkpower_client: perf_lock_rel, hdl:27629,
tid:7293
05-19 [Link].421 479 1594 I libPowerHal: [PD] scn:2 hdl:27629
lock_user:[email protected] pid:918 tid:7293 dur:0
05-19 [Link].877 918 11689 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].877 918 11689 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].880 918 11689 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].880 918 11689 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].881 918 11689 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].881 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].881 918 11689 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].929 918 7337 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].929 918 7337 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].929 918 7337 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].930 918 7337 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].931 918 7337 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 26917
05-19 [Link].931 918 7337 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf7ee000
05-19 [Link].931 918 7337 E VDO_LOG : vp9_dec_init() u4Width 832, u4Height
1408, Offset 0, Padding 0
05-19 [Link].932 918 7342 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7342
05-19 [Link].933 918 7342 I mtkpower_client: ret_hdl:27635
05-19 [Link].933 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27635 hint:-1
pid:918 duration:0 => ret_hdl:27635
05-19 [Link].933 479 1594 I libPowerHal: [PE] scn:0 hdl:27635
lock_user:[email protected] pid:918 tid:7342 dur:0
05-19 [Link].942 918 7337 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].943 918 7337 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].943 918 7337 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].943 918 7337 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].943 918 7337 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].148 918 7287 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].166 918 7287 I mtkpower_client: perf_lock_rel, hdl:27629,
tid:7287
05-19 [Link].167 918 7287 I mtkpower_client: perf_lock_rel, hdl:27628,
tid:7287
05-19 [Link].168 479 1594 I libPowerHal: [PD] scn:1 hdl:27628
lock_user:[email protected] pid:918 tid:7293 dur:0
05-19 [Link].169 918 7287 I mtkpower_client: perf_lock_rel, hdl:27627,
tid:7287
05-19 [Link].312 918 7341 I mtkpower_client: perf_lock_rel, hdl:27635,
tid:7341
05-19 [Link].312 918 7341 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7341
05-19 [Link].312 479 1594 I libPowerHal: [PD] scn:0 hdl:27635
lock_user:[email protected] pid:918 tid:7342 dur:0
05-19 [Link].313 918 7341 I mtkpower_client: ret_hdl:27636
05-19 [Link].314 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27636 hint:-1
pid:918 duration:0 => ret_hdl:27636
05-19 [Link].314 479 1594 I libPowerHal: [PE] scn:0 hdl:27636
lock_user:[email protected] pid:918 tid:7341 dur:0
05-19 [Link].803 918 918 E OMXNodeInstance:
setParameter(0xea483004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].804 918 918 E OMXNodeInstance:
getParameter(0xea483004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].806 918 918 E MtkOmxVdecEx: [0xea483000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].806 918 918 E OMXNodeInstance:
setConfig(0xea483004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].808 918 918 E OMXNodeInstance:
getParameter(0xea483004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].808 918 918 E OMXNodeInstance:
getConfig(0xea483004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].809 918 918 E OMXNodeInstance:
getConfig(0xea483004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].845 918 7386 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].845 918 7386 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].845 918 7386 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].846 918 7386 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].846 918 7386 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 31536
05-19 [Link].846 918 7386 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2a35000
05-19 [Link].846 918 7386 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].852 918 7390 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7390
05-19 [Link].854 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27642 hint:-1
pid:918 duration:0 => ret_hdl:27642
05-19 [Link].854 479 1594 I libPowerHal: [PE] scn:2 hdl:27642
lock_user:[email protected] pid:918 tid:7390 dur:0
05-19 [Link].854 918 7390 I mtkpower_client: ret_hdl:27642
05-19 [Link].917 918 7386 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].917 918 7386 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].917 918 7386 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].917 918 7386 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].917 918 7386 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].997 918 7341 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7341
05-19 [Link].998 918 7341 I mtkpower_client: ret_hdl:27643
05-19 [Link].998 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27643 hint:-1
pid:918 duration:0 => ret_hdl:27643
05-19 [Link].999 479 1594 I libPowerHal: [PE] scn:3 hdl:27643
lock_user:[email protected] pid:918 tid:7341 dur:0
05-19 [Link].056 918 7336 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].067 918 7336 I mtkpower_client: perf_lock_rel, hdl:27643,
tid:7336
05-19 [Link].068 918 7336 I mtkpower_client: perf_lock_rel, hdl:27636,
tid:7336
05-19 [Link].068 918 7336 I mtkpower_client: perf_lock_rel, hdl:27635,
tid:7336
05-19 [Link].068 479 1594 I libPowerHal: [PD] scn:3 hdl:27643
lock_user:[email protected] pid:918 tid:7341 dur:0
05-19 [Link].070 479 1594 I libPowerHal: [PD] scn:0 hdl:27636
lock_user:[email protected] pid:918 tid:7341 dur:0
05-19 [Link].204 918 7389 I mtkpower_client: perf_lock_rel, hdl:27642,
tid:7389
05-19 [Link].205 918 7389 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7389
05-19 [Link].208 479 1594 I libPowerHal: [PD] scn:2 hdl:27642
lock_user:[email protected] pid:918 tid:7390 dur:0
05-19 [Link].209 918 7389 I mtkpower_client: ret_hdl:27644
05-19 [Link].210 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27644 hint:-1
pid:918 duration:0 => ret_hdl:27644
05-19 [Link].210 479 1594 I libPowerHal: [PE] scn:0 hdl:27644
lock_user:[email protected] pid:918 tid:7389 dur:0
05-19 [Link].918 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27648
hint:1155 pid:501 duration:1065 => ret_hdl:27648
05-19 [Link].918 479 1594 I libPowerHal: [PE] scn:2 hdl:27648 hint:1155
comm:[email protected] pid:501
05-19 [Link].983 918 5020 E OMXNodeInstance:
setParameter(0xe9d88004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].984 918 1820 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].988 918 1721 E MtkOmxVdecEx: [0xe9d88000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].988 918 1721 E OMXNodeInstance:
setConfig(0xe9d88004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].989 918 5020 E OMXNodeInstance:
getParameter(0xe9d88004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].989 918 1820 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].990 918 1820 E OMXNodeInstance:
getConfig(0xe9d88004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].008 918 7389 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7389
05-19 [Link].010 918 7389 I mtkpower_client: ret_hdl:27650
05-19 [Link].010 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27650 hint:-1
pid:918 duration:0 => ret_hdl:27650
05-19 [Link].010 479 1594 I libPowerHal: [PE] scn:1 hdl:27650
lock_user:[email protected] pid:918 tid:7389 dur:0
05-19 [Link].115 918 7433 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c62810
05-19 [Link].115 918 7433 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].115 918 7433 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].116 918 7433 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].116 918 7433 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 61959
05-19 [Link].116 918 7433 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdfc87000
05-19 [Link].116 918 7433 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].124 918 7441 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7441
05-19 [Link].124 918 7441 I mtkpower_client: ret_hdl:27651
05-19 [Link].124 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27651 hint:-1
pid:918 duration:0 => ret_hdl:27651
05-19 [Link].125 479 1594 I libPowerHal: [PE] scn:3 hdl:27651
lock_user:[email protected] pid:918 tid:7441 dur:0
05-19 [Link].140 918 7433 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].140 918 7433 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].140 918 7433 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].140 918 7433 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].140 918 7433 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].268 918 7385 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].286 918 7385 I mtkpower_client: perf_lock_rel, hdl:27650,
tid:7385
05-19 [Link].288 918 7385 I mtkpower_client: perf_lock_rel, hdl:27644,
tid:7385
05-19 [Link].288 918 7385 I mtkpower_client: perf_lock_rel, hdl:27642,
tid:7385
05-19 [Link].289 479 1594 I libPowerHal: [PD] scn:1 hdl:27650
lock_user:[email protected] pid:918 tid:7389 dur:0
05-19 [Link].290 479 1594 I libPowerHal: [PD] scn:0 hdl:27644
lock_user:[email protected] pid:918 tid:7389 dur:0
05-19 [Link].400 918 7440 I mtkpower_client: perf_lock_rel, hdl:27651,
tid:7440
05-19 [Link].401 918 7440 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7440
05-19 [Link].402 479 1594 I libPowerHal: [PD] scn:3 hdl:27651
lock_user:[email protected] pid:918 tid:7441 dur:0
05-19 [Link].402 918 7440 I mtkpower_client: ret_hdl:27652
05-19 [Link].403 918 7440 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7440
05-19 [Link].403 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27652 hint:-1
pid:918 duration:0 => ret_hdl:27652
05-19 [Link].403 479 1594 I libPowerHal: [PE] scn:0 hdl:27652
lock_user:[email protected] pid:918 tid:7440 dur:0
05-19 [Link].403 918 7440 I mtkpower_client: ret_hdl:27653
05-19 [Link].404 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27653 hint:-1
pid:918 duration:0 => ret_hdl:27653
05-19 [Link].404 479 1594 I libPowerHal: [PE] scn:1 hdl:27653
lock_user:[email protected] pid:918 tid:7440 dur:0
05-19 [Link].478 918 7440 I mtkpower_client: perf_lock_rel, hdl:27653,
tid:7440
05-19 [Link].481 479 1594 I libPowerHal: [PD] scn:1 hdl:27653
lock_user:[email protected] pid:918 tid:7440 dur:0
05-19 [Link].626 918 7440 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7440
05-19 [Link].627 918 7440 I mtkpower_client: ret_hdl:27654
05-19 [Link].627 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27654 hint:-1
pid:918 duration:0 => ret_hdl:27654
05-19 [Link].627 479 1594 I libPowerHal: [PE] scn:1 hdl:27654
lock_user:[email protected] pid:918 tid:7440 dur:0
05-19 [Link].689 918 7440 I mtkpower_client: perf_lock_rel, hdl:27654,
tid:7440
05-19 [Link].690 479 1594 I libPowerHal: [PD] scn:1 hdl:27654
lock_user:[email protected] pid:918 tid:7440 dur:0
05-19 [Link].919 918 6021 E OMXNodeInstance:
setParameter(0xea5f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].920 918 1088 E OMXNodeInstance:
getParameter(0xea5f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].923 918 1721 E MtkOmxVdecEx: [0xea5f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].923 918 1721 E OMXNodeInstance:
setConfig(0xea5f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].923 918 1721 E OMXNodeInstance:
getParameter(0xea5f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].923 918 1064 E OMXNodeInstance:
getConfig(0xea5f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].924 918 1088 E OMXNodeInstance:
getConfig(0xea5f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].024 918 7484 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].024 918 7484 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].024 918 7484 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].025 918 7484 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].026 918 7484 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 65177
05-19 [Link].026 918 7484 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2c8e000
05-19 [Link].026 918 7484 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].046 918 7491 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7491
05-19 [Link].048 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27660 hint:-1
pid:918 duration:0 => ret_hdl:27660
05-19 [Link].048 479 1594 I libPowerHal: [PE] scn:2 hdl:27660
lock_user:[email protected] pid:918 tid:7491 dur:0
05-19 [Link].048 918 7491 I mtkpower_client: ret_hdl:27660
05-19 [Link].060 918 7484 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].060 918 7484 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].060 918 7484 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].060 918 7484 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].060 918 7484 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].140 918 7432 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].151 918 7432 I mtkpower_client: perf_lock_rel, hdl:27654,
tid:7432
05-19 [Link].153 918 7432 I mtkpower_client: perf_lock_rel, hdl:27652,
tid:7432
05-19 [Link].154 479 1594 I libPowerHal: [PD] scn:0 hdl:27652
lock_user:[email protected] pid:918 tid:7440 dur:0
05-19 [Link].155 918 7432 I mtkpower_client: perf_lock_rel, hdl:27651,
tid:7432
05-19 [Link].373 918 7489 I mtkpower_client: perf_lock_rel, hdl:27660,
tid:7489
05-19 [Link].373 918 7489 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7489
05-19 [Link].374 479 1594 I libPowerHal: [PD] scn:2 hdl:27660
lock_user:[email protected] pid:918 tid:7491 dur:0
05-19 [Link].375 918 7489 I mtkpower_client: ret_hdl:27661
05-19 [Link].375 918 7489 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7489
05-19 [Link].375 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27661 hint:-1
pid:918 duration:0 => ret_hdl:27661
05-19 [Link].376 479 1594 I libPowerHal: [PE] scn:0 hdl:27661
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].377 918 7489 I mtkpower_client: ret_hdl:27662
05-19 [Link].377 918 7489 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7489
05-19 [Link].377 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27662 hint:-1
pid:918 duration:0 => ret_hdl:27662
05-19 [Link].377 479 1594 I libPowerHal: [PE] scn:2 hdl:27662
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].378 918 7489 I mtkpower_client: ret_hdl:27663
05-19 [Link].378 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27663 hint:-1
pid:918 duration:0 => ret_hdl:27663
05-19 [Link].378 479 1594 I libPowerHal: [PE] scn:3 hdl:27663
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].515 918 7489 I mtkpower_client: perf_lock_rel, hdl:27663,
tid:7489
05-19 [Link].516 479 1594 I libPowerHal: [PD] scn:3 hdl:27663
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].767 918 1088 E OMXNodeInstance:
setParameter(0xe9c5e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].767 918 1088 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].770 918 11716 E MtkOmxVdecEx: [0xe9c5e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].770 918 11716 E OMXNodeInstance:
setConfig(0xe9c5e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].771 918 5033 E OMXNodeInstance:
getParameter(0xe9c5e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].771 918 1088 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].772 918 1088 E OMXNodeInstance:
getConfig(0xe9c5e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].793 918 7489 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7489
05-19 [Link].795 918 7489 I mtkpower_client: ret_hdl:27669
05-19 [Link].797 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27669 hint:-1
pid:918 duration:0 => ret_hdl:27669
05-19 [Link].797 479 1594 I libPowerHal: [PE] scn:1 hdl:27669
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].811 918 7531 E VDO_LOG : GetDecoderAPI hWrapper 0xe9c37810
05-19 [Link].811 918 7531 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].811 918 7531 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].813 918 7531 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].813 918 7531 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 75685
05-19 [Link].813 918 7531 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdf885000
05-19 [Link].813 918 7531 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].819 918 7537 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7537
05-19 [Link].820 918 7537 I mtkpower_client: ret_hdl:27670
05-19 [Link].820 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27670 hint:-1
pid:918 duration:0 => ret_hdl:27670
05-19 [Link].820 479 1594 I libPowerHal: [PE] scn:4 hdl:27670
lock_user:[email protected] pid:918 tid:7537 dur:0
05-19 [Link].834 918 7531 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].835 918 7531 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].835 918 7531 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].835 918 7531 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].835 918 7531 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].050 918 7483 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].086 918 7483 I mtkpower_client: perf_lock_rel, hdl:27669,
tid:7483
05-19 [Link].087 918 7483 I mtkpower_client: perf_lock_rel, hdl:27662,
tid:7483
05-19 [Link].087 918 7483 I mtkpower_client: perf_lock_rel, hdl:27661,
tid:7483
05-19 [Link].087 918 7483 I mtkpower_client: perf_lock_rel, hdl:27660,
tid:7483
05-19 [Link].088 479 1594 I libPowerHal: [PD] scn:1 hdl:27669
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].089 479 1594 I libPowerHal: [PD] scn:2 hdl:27662
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].098 479 1594 I libPowerHal: [PD] scn:0 hdl:27661
lock_user:[email protected] pid:918 tid:7489 dur:0
05-19 [Link].149 918 7536 I mtkpower_client: perf_lock_rel, hdl:27670,
tid:7536
05-19 [Link].149 918 7536 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7536
05-19 [Link].150 479 1594 I libPowerHal: [PD] scn:4 hdl:27670
lock_user:[email protected] pid:918 tid:7537 dur:0
05-19 [Link].151 918 7536 I mtkpower_client: ret_hdl:27671
05-19 [Link].151 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27671 hint:-1
pid:918 duration:0 => ret_hdl:27671
05-19 [Link].152 479 1594 I libPowerHal: [PE] scn:0 hdl:27671
lock_user:[email protected] pid:918 tid:7536 dur:0
05-19 [Link].659 918 15538 E OMXNodeInstance:
setParameter(0xea5f1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].660 918 15538 E OMXNodeInstance:
getParameter(0xea5f1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].664 918 15538 E MtkOmxVdecEx: [0xea5f1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].664 918 15538 E OMXNodeInstance:
setConfig(0xea5f1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].665 918 15538 E OMXNodeInstance:
getParameter(0xea5f1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].665 918 15538 E OMXNodeInstance:
getConfig(0xea5f1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].665 918 15538 E OMXNodeInstance:
getConfig(0xea5f1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].705 918 7584 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].705 918 7584 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].705 918 7584 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].706 918 7584 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].707 918 7584 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 27422
05-19 [Link].707 918 7584 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].707 918 7584 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].712 918 7588 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7588
05-19 [Link].713 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27677 hint:-1
pid:918 duration:0 => ret_hdl:27677
05-19 [Link].713 479 1594 I libPowerHal: [PE] scn:1 hdl:27677
lock_user:[email protected] pid:918 tid:7588 dur:0
05-19 [Link].713 918 7588 I mtkpower_client: ret_hdl:27677
05-19 [Link].731 918 7584 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].731 918 7584 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].731 918 7584 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].731 918 7584 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].731 918 7584 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].831 918 7530 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].862 918 7530 I mtkpower_client: perf_lock_rel, hdl:27671,
tid:7530
05-19 [Link].862 918 7530 I mtkpower_client: perf_lock_rel, hdl:27670,
tid:7530
05-19 [Link].863 479 1594 I libPowerHal: [PD] scn:0 hdl:27671
lock_user:[email protected] pid:918 tid:7536 dur:0
05-19 [Link].062 918 7587 I mtkpower_client: perf_lock_rel, hdl:27677,
tid:7587
05-19 [Link].062 918 7587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7587
05-19 [Link].063 479 1594 I libPowerHal: [PD] scn:1 hdl:27677
lock_user:[email protected] pid:918 tid:7588 dur:0
05-19 [Link].064 918 7587 I mtkpower_client: ret_hdl:27678
05-19 [Link].064 918 7587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7587
05-19 [Link].065 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27678 hint:-1
pid:918 duration:0 => ret_hdl:27678
05-19 [Link].065 479 1594 I libPowerHal: [PE] scn:0 hdl:27678
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].066 918 7587 I mtkpower_client: ret_hdl:27679
05-19 [Link].069 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27679 hint:-1
pid:918 duration:0 => ret_hdl:27679
05-19 [Link].069 479 1594 I libPowerHal: [PE] scn:1 hdl:27679
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].259 918 7587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7587
05-19 [Link].260 918 7587 I mtkpower_client: ret_hdl:27680
05-19 [Link].260 918 7587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7587
05-19 [Link].261 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27680 hint:-1
pid:918 duration:0 => ret_hdl:27680
05-19 [Link].261 479 1594 I libPowerHal: [PE] scn:2 hdl:27680
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].262 918 7587 I mtkpower_client: ret_hdl:27681
05-19 [Link].262 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27681 hint:-1
pid:918 duration:0 => ret_hdl:27681
05-19 [Link].262 479 1594 I libPowerHal: [PE] scn:3 hdl:27681
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].434 918 7587 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7587
05-19 [Link].435 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27685 hint:-1
pid:918 duration:0 => ret_hdl:27685
05-19 [Link].435 479 1594 I libPowerHal: [PE] scn:7 hdl:27685
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].436 918 7587 I mtkpower_client: ret_hdl:27685
05-19 [Link].548 918 7587 I mtkpower_client: perf_lock_rel, hdl:27685,
tid:7587
05-19 [Link].549 479 1594 I libPowerHal: [PD] scn:7 hdl:27685
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].664 918 7587 I mtkpower_client: perf_lock_rel, hdl:27681,
tid:7587
05-19 [Link].666 479 1594 I libPowerHal: [PD] scn:3 hdl:27681
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].699 918 7582 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].713 918 7582 I mtkpower_client: perf_lock_rel, hdl:27685,
tid:7582
05-19 [Link].714 918 7582 I mtkpower_client: perf_lock_rel, hdl:27681,
tid:7582
05-19 [Link].714 918 7582 I mtkpower_client: perf_lock_rel, hdl:27680,
tid:7582
05-19 [Link].714 918 7582 I mtkpower_client: perf_lock_rel, hdl:27679,
tid:7582
05-19 [Link].714 918 7582 I mtkpower_client: perf_lock_rel, hdl:27678,
tid:7582
05-19 [Link].714 918 7582 I mtkpower_client: perf_lock_rel, hdl:27677,
tid:7582
05-19 [Link].716 918 7582 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].717 918 7582 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].717 918 7582 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].717 918 7582 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].717 479 1594 I libPowerHal: [PD] scn:2 hdl:27680
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].720 479 1594 I libPowerHal: [PD] scn:1 hdl:27679
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].724 479 1594 I libPowerHal: [PD] scn:0 hdl:27678
lock_user:[email protected] pid:918 tid:7587 dur:0
05-19 [Link].834 918 1064 E OMXNodeInstance:
setParameter(0xea2e9804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].836 918 11689 E OMXNodeInstance:
getParameter(0xea2e9804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].841 918 1066 E MtkOmxVdecEx: [0xea2e9800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].841 918 1066 E OMXNodeInstance:
setConfig(0xea2e9804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].841 918 5033 E OMXNodeInstance:
getParameter(0xea2e9804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].842 918 1066 E OMXNodeInstance:
getConfig(0xea2e9804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].843 918 32757 E OMXNodeInstance:
getConfig(0xea2e9804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].888 918 7635 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].888 918 7635 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].888 918 7635 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].888 918 7635 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].888 918 7635 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].891 918 7635 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].891 918 7635 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].891 918 7635 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].899 918 7635 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].900 918 7635 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21058
05-19 [Link].900 918 7635 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].900 918 7635 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].902 918 7640 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7640
05-19 [Link].904 918 7640 I mtkpower_client: ret_hdl:27688
05-19 [Link].904 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27688 hint:-1
pid:918 duration:0 => ret_hdl:27688
05-19 [Link].904 479 1594 I libPowerHal: [PE] scn:0 hdl:27688
lock_user:[email protected] pid:918 tid:7640 dur:0
05-19 [Link].916 918 7635 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].916 918 7635 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].916 918 7635 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].916 918 7635 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].916 918 7635 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].186 918 7638 I mtkpower_client: perf_lock_rel, hdl:27688,
tid:7638
05-19 [Link].186 918 7638 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7638
05-19 [Link].187 479 1594 I libPowerHal: [PD] scn:0 hdl:27688
lock_user:[email protected] pid:918 tid:7640 dur:0
05-19 [Link].191 918 7638 I mtkpower_client: ret_hdl:27689
05-19 [Link].192 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27689 hint:-1
pid:918 duration:0 => ret_hdl:27689
05-19 [Link].192 479 1594 I libPowerHal: [PE] scn:1 hdl:27689
lock_user:[email protected] pid:918 tid:7638 dur:0
05-19 [Link].512 918 1066 E OMXNodeInstance:
setParameter(0xea44e804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].513 918 1066 E OMXNodeInstance:
getParameter(0xea44e804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].518 918 1066 E MtkOmxVdecEx: [0xea44e800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].518 918 1066 E OMXNodeInstance:
setConfig(0xea44e804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].518 918 1066 E OMXNodeInstance:
getParameter(0xea44e804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].519 918 1066 E OMXNodeInstance:
getConfig(0xea44e804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].520 918 1066 E OMXNodeInstance:
getConfig(0xea44e804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].596 918 7696 E VDO_LOG : GetDecoderAPI hWrapper 0xe9beb810
05-19 [Link].596 918 7696 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].596 918 7696 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].596 918 7696 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].596 918 7696 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 47468
05-19 [Link].597 918 7696 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdecb0000
05-19 [Link].597 918 7696 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].599 918 7701 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7701
05-19 [Link].600 918 7701 I mtkpower_client: ret_hdl:27695
05-19 [Link].600 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27695 hint:-1
pid:918 duration:0 => ret_hdl:27695
05-19 [Link].601 479 1594 I libPowerHal: [PE] scn:2 hdl:27695
lock_user:[email protected] pid:918 tid:7701 dur:0
05-19 [Link].610 918 7696 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].610 918 7696 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].610 918 7696 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].610 918 7696 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].610 918 7696 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].664 918 7638 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7638
05-19 [Link].666 918 7638 I mtkpower_client: ret_hdl:27696
05-19 [Link].667 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27696 hint:-1
pid:918 duration:0 => ret_hdl:27696
05-19 [Link].667 479 1594 I libPowerHal: [PE] scn:3 hdl:27696
lock_user:[email protected] pid:918 tid:7638 dur:0
05-19 [Link].804 918 7634 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].817 918 7634 I mtkpower_client: perf_lock_rel, hdl:27696,
tid:7634
05-19 [Link].817 918 7634 I mtkpower_client: perf_lock_rel, hdl:27689,
tid:7634
05-19 [Link].818 918 7634 I mtkpower_client: perf_lock_rel, hdl:27688,
tid:7634
05-19 [Link].819 479 1594 I libPowerHal: [PD] scn:3 hdl:27696
lock_user:[email protected] pid:918 tid:7638 dur:0
05-19 [Link].821 479 1594 I libPowerHal: [PD] scn:1 hdl:27689
lock_user:[email protected] pid:918 tid:7638 dur:0
05-19 [Link].918 507 4197 V APM_AudioPolicyManager: getDevicesForStream()
device {type:0x4,@:}, activeDevices {type:0x4,@:}
05-19 [Link].993 918 7700 I mtkpower_client: perf_lock_rel, hdl:27695,
tid:7700
05-19 [Link].993 918 7700 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7700
05-19 [Link].996 479 1594 I libPowerHal: [PD] scn:2 hdl:27695
lock_user:[email protected] pid:918 tid:7701 dur:0
05-19 [Link].999 918 7700 I mtkpower_client: ret_hdl:27697
05-19 [Link].999 918 7700 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7700
05-19 [Link].000 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27697 hint:-1
pid:918 duration:0 => ret_hdl:27697
05-19 [Link].000 479 1594 I libPowerHal: [PE] scn:1 hdl:27697
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].001 918 7700 I mtkpower_client: ret_hdl:27698
05-19 [Link].001 918 7700 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7700
05-19 [Link].001 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27698 hint:-1
pid:918 duration:0 => ret_hdl:27698
05-19 [Link].002 479 1594 I libPowerHal: [PE] scn:2 hdl:27698
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].004 918 7700 I mtkpower_client: ret_hdl:27699
05-19 [Link].004 918 7700 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7700
05-19 [Link].005 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27699 hint:-1
pid:918 duration:0 => ret_hdl:27699
05-19 [Link].005 479 1594 I libPowerHal: [PE] scn:3 hdl:27699
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].006 918 7700 I mtkpower_client: ret_hdl:27700
05-19 [Link].007 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27700 hint:-1
pid:918 duration:0 => ret_hdl:27700
05-19 [Link].007 479 1594 I libPowerHal: [PE] scn:4 hdl:27700
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].126 918 7700 I mtkpower_client: perf_lock_rel, hdl:27700,
tid:7700
05-19 [Link].126 479 1594 I libPowerHal: [PD] scn:4 hdl:27700
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].421 918 7700 I mtkpower_client: perf_lock_rel, hdl:27699,
tid:7700
05-19 [Link].422 479 1594 I libPowerHal: [PD] scn:3 hdl:27699
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].516 918 9097 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].516 918 32757 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].521 918 1066 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].521 918 1066 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].521 918 1066 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].522 918 1960 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].523 918 1784 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].593 918 7700 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7700
05-19 [Link].595 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27706 hint:-1
pid:918 duration:0 => ret_hdl:27706
05-19 [Link].595 479 1594 I libPowerHal: [PE] scn:0 hdl:27706
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].596 918 7700 I mtkpower_client: ret_hdl:27706
05-19 [Link].653 918 7753 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fc7810
05-19 [Link].653 918 7753 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].653 918 7753 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].654 918 7753 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].654 918 7753 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 95347
05-19 [Link].654 918 7753 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe298b000
05-19 [Link].654 918 7753 E VDO_LOG : vp9_dec_init() u4Width 1088, u4Height
1856, Offset 0, Padding 0
05-19 [Link].676 918 7759 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7759
05-19 [Link].678 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27707 hint:-1
pid:918 duration:0 => ret_hdl:27707
05-19 [Link].678 479 1594 I libPowerHal: [PE] scn:4 hdl:27707
lock_user:[email protected] pid:918 tid:7759 dur:0
05-19 [Link].679 918 7759 I mtkpower_client: ret_hdl:27707
05-19 [Link].718 918 7753 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].718 918 7753 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].718 918 7753 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].718 918 7753 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].718 918 7753 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].741 918 7695 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].772 918 7695 I mtkpower_client: perf_lock_rel, hdl:27700,
tid:7695
05-19 [Link].787 918 7695 I mtkpower_client: perf_lock_rel, hdl:27706,
tid:7695
05-19 [Link].787 918 7695 I mtkpower_client: perf_lock_rel, hdl:27698,
tid:7695
05-19 [Link].787 918 7695 I mtkpower_client: perf_lock_rel, hdl:27697,
tid:7695
05-19 [Link].787 918 7695 I mtkpower_client: perf_lock_rel, hdl:27695,
tid:7695
05-19 [Link].790 479 1594 I libPowerHal: [PD] scn:0 hdl:27706
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].825 479 1594 I libPowerHal: [PD] scn:2 hdl:27698
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].825 479 1594 I libPowerHal: [PD] scn:1 hdl:27697
lock_user:[email protected] pid:918 tid:7700 dur:0
05-19 [Link].171 918 7758 I mtkpower_client: perf_lock_rel, hdl:27707,
tid:7758
05-19 [Link].171 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].171 479 1594 I libPowerHal: [PD] scn:4 hdl:27707
lock_user:[email protected] pid:918 tid:7759 dur:0
05-19 [Link].173 918 7758 I mtkpower_client: ret_hdl:27709
05-19 [Link].174 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].174 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27709 hint:-1
pid:918 duration:0 => ret_hdl:27709
05-19 [Link].174 479 1594 I libPowerHal: [PE] scn:1 hdl:27709
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].174 918 7758 I mtkpower_client: ret_hdl:27710
05-19 [Link].175 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].176 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27710 hint:-1
pid:918 duration:0 => ret_hdl:27710
05-19 [Link].176 479 1594 I libPowerHal: [PE] scn:2 hdl:27710
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].179 918 7758 I mtkpower_client: ret_hdl:27712
05-19 [Link].183 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27712 hint:-1
pid:918 duration:0 => ret_hdl:27712
05-19 [Link].184 479 1594 I libPowerHal: [PE] scn:4 hdl:27712
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].329 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].331 918 7758 I mtkpower_client: ret_hdl:27714
05-19 [Link].332 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27714 hint:-1
pid:918 duration:0 => ret_hdl:27714
05-19 [Link].332 479 1594 I libPowerHal: [PE] scn:3 hdl:27714
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].511 918 7758 I mtkpower_client: perf_lock_rel, hdl:27714,
tid:7758
05-19 [Link].512 479 1594 I libPowerHal: [PD] scn:3 hdl:27714
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].679 918 7758 I mtkpower_client: perf_lock_rel, hdl:27712,
tid:7758
05-19 [Link].680 479 1594 I libPowerHal: [PD] scn:4 hdl:27712
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].733 918 1960 E OMXNodeInstance:
setParameter(0xea2e9804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].734 918 1784 E OMXNodeInstance:
getParameter(0xea2e9804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].744 918 1960 E MtkOmxVdecEx: [0xea2e9800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].744 918 1960 E OMXNodeInstance:
setConfig(0xea2e9804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].744 918 11717 E OMXNodeInstance:
getParameter(0xea2e9804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].745 918 1784 E OMXNodeInstance:
getConfig(0xea2e9804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].746 918 1960 E OMXNodeInstance:
getConfig(0xea2e9804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].784 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].784 918 7758 I mtkpower_client: ret_hdl:27715
05-19 [Link].784 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27715 hint:-1
pid:918 duration:0 => ret_hdl:27715
05-19 [Link].784 479 1594 I libPowerHal: [PE] scn:3 hdl:27715
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].804 918 7799 E VDO_LOG : GetDecoderAPI hWrapper 0xea09d810
05-19 [Link].804 918 7799 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].804 918 7799 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].805 918 7799 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].805 918 7799 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 55844
05-19 [Link].805 918 7799 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0162000
05-19 [Link].805 918 7799 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].815 918 7803 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7803
05-19 [Link].816 918 7803 I mtkpower_client: ret_hdl:27716
05-19 [Link].817 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27716 hint:-1
pid:918 duration:0 => ret_hdl:27716
05-19 [Link].817 479 1594 I libPowerHal: [PE] scn:4 hdl:27716
lock_user:[email protected] pid:918 tid:7803 dur:0
05-19 [Link].824 918 7799 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].824 918 7799 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].824 918 7799 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].824 918 7799 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].824 918 7799 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].073 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].076 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27718 hint:-1
pid:918 duration:0 => ret_hdl:27718
05-19 [Link].076 479 1594 I libPowerHal: [PE] scn:5 hdl:27718
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].079 918 7758 I mtkpower_client: ret_hdl:27718
05-19 [Link].079 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].085 918 7758 I mtkpower_client: ret_hdl:27719
05-19 [Link].085 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].086 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27719 hint:-1
pid:918 duration:0 => ret_hdl:27719
05-19 [Link].086 479 1594 I libPowerHal: [PE] scn:6 hdl:27719
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].087 918 7758 I mtkpower_client: ret_hdl:27720
05-19 [Link].088 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27720 hint:-1
pid:918 duration:0 => ret_hdl:27720
05-19 [Link].088 479 1594 I libPowerHal: [PE] scn:7 hdl:27720
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].193 918 7758 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7758
05-19 [Link].197 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27721 hint:-1
pid:918 duration:0 => ret_hdl:27721
05-19 [Link].197 479 1594 I libPowerHal: [PE] scn:0 hdl:27721
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].199 918 7758 I mtkpower_client: ret_hdl:27721
05-19 [Link].317 918 7798 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].347 918 7798 I mtkpower_client: perf_lock_rel, hdl:27716,
tid:7798
05-19 [Link].349 479 1594 I libPowerHal: [PD] scn:4 hdl:27716
lock_user:[email protected] pid:918 tid:7803 dur:0
05-19 [Link].407 918 7758 I mtkpower_client: perf_lock_rel, hdl:27721,
tid:7758
05-19 [Link].408 918 7758 I mtkpower_client: perf_lock_rel, hdl:27720,
tid:7758
05-19 [Link].409 479 1594 I libPowerHal: [PD] scn:0 hdl:27721
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].412 479 1594 I libPowerHal: [PD] scn:7 hdl:27720
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].621 918 7758 I mtkpower_client: perf_lock_rel, hdl:27719,
tid:7758
05-19 [Link].621 918 7758 I mtkpower_client: perf_lock_rel, hdl:27718,
tid:7758
05-19 [Link].622 479 1594 I libPowerHal: [PD] scn:6 hdl:27719
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].624 479 1594 I libPowerHal: [PD] scn:5 hdl:27718
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].681 918 7758 I mtkpower_client: perf_lock_rel, hdl:27715,
tid:7758
05-19 [Link].682 479 1594 I libPowerHal: [PD] scn:3 hdl:27715
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].745 918 7758 I mtkpower_client: perf_lock_rel, hdl:27710,
tid:7758
05-19 [Link].746 479 1594 I libPowerHal: [PD] scn:2 hdl:27710
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].783 918 9097 E OMXNodeInstance:
setParameter(0xea2b0804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].784 918 9097 E OMXNodeInstance:
getParameter(0xea2b0804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].786 918 9097 E MtkOmxVdecEx: [0xea2b0800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].786 918 9097 E OMXNodeInstance:
setConfig(0xea2b0804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].787 918 9097 E OMXNodeInstance:
getParameter(0xea2b0804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].787 918 9097 E OMXNodeInstance:
getConfig(0xea2b0804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].788 918 9097 E OMXNodeInstance:
getConfig(0xea2b0804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].834 918 7842 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].834 918 7842 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].835 918 7842 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].835 918 7842 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].836 918 7842 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 55844
05-19 [Link].836 918 7842 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdec8f000
05-19 [Link].836 918 7842 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].838 918 7848 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7848
05-19 [Link].839 918 7848 I mtkpower_client: ret_hdl:27727
05-19 [Link].839 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27727 hint:-1
pid:918 duration:0 => ret_hdl:27727
05-19 [Link].839 479 1594 I libPowerHal: [PE] scn:2 hdl:27727
lock_user:[email protected] pid:918 tid:7848 dur:0
05-19 [Link].858 918 7842 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].858 918 7842 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].858 918 7842 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].858 918 7842 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].858 918 7842 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].112 918 7752 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].153 918 7752 I mtkpower_client: perf_lock_rel, hdl:27721,
tid:7752
05-19 [Link].154 918 7752 I mtkpower_client: perf_lock_rel, hdl:27720,
tid:7752
05-19 [Link].155 918 7752 I mtkpower_client: perf_lock_rel, hdl:27719,
tid:7752
05-19 [Link].156 918 7752 I mtkpower_client: perf_lock_rel, hdl:27718,
tid:7752
05-19 [Link].157 918 7752 I mtkpower_client: perf_lock_rel, hdl:27715,
tid:7752
05-19 [Link].161 918 7752 I mtkpower_client: perf_lock_rel, hdl:27710,
tid:7752
05-19 [Link].162 918 7752 I mtkpower_client: perf_lock_rel, hdl:27709,
tid:7752
05-19 [Link].162 479 1594 I libPowerHal: [PD] scn:1 hdl:27709
lock_user:[email protected] pid:918 tid:7758 dur:0
05-19 [Link].163 918 7752 I mtkpower_client: perf_lock_rel, hdl:27707,
tid:7752
05-19 [Link].230 918 7846 I mtkpower_client: perf_lock_rel, hdl:27727,
tid:7846
05-19 [Link].231 918 7846 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7846
05-19 [Link].232 479 1594 I libPowerHal: [PD] scn:2 hdl:27727
lock_user:[email protected] pid:918 tid:7848 dur:0
05-19 [Link].232 918 7846 I mtkpower_client: ret_hdl:27728
05-19 [Link].232 918 7846 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7846
05-19 [Link].232 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27728 hint:-1
pid:918 duration:0 => ret_hdl:27728
05-19 [Link].232 479 1594 I libPowerHal: [PE] scn:1 hdl:27728
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].233 918 7846 I mtkpower_client: ret_hdl:27729
05-19 [Link].233 918 7846 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7846
05-19 [Link].233 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27729 hint:-1
pid:918 duration:0 => ret_hdl:27729
05-19 [Link].233 479 1594 I libPowerHal: [PE] scn:2 hdl:27729
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].234 918 7846 I mtkpower_client: ret_hdl:27730
05-19 [Link].234 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27730 hint:-1
pid:918 duration:0 => ret_hdl:27730
05-19 [Link].234 479 1594 I libPowerHal: [PE] scn:3 hdl:27730
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].388 918 7846 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7846
05-19 [Link].391 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27731 hint:-1
pid:918 duration:0 => ret_hdl:27731
05-19 [Link].391 479 1594 I libPowerHal: [PE] scn:4 hdl:27731
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].392 918 7846 I mtkpower_client: ret_hdl:27731
05-19 [Link].500 918 7846 I mtkpower_client: perf_lock_rel, hdl:27731,
tid:7846
05-19 [Link].502 479 1594 I libPowerHal: [PD] scn:4 hdl:27731
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].684 918 9097 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].685 918 1085 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].689 918 9097 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].689 918 9097 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].689 918 9097 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].690 918 1085 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].690 918 1085 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].727 918 7888 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].727 918 7888 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].727 918 7888 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].730 918 7888 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].730 918 7888 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28261
05-19 [Link].730 918 7888 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe245f000
05-19 [Link].730 918 7888 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].739 918 7894 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7894
05-19 [Link].740 918 7894 I mtkpower_client: ret_hdl:27737
05-19 [Link].741 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27737 hint:-1
pid:918 duration:0 => ret_hdl:27737
05-19 [Link].741 479 1594 I libPowerHal: [PE] scn:4 hdl:27737
lock_user:[email protected] pid:918 tid:7894 dur:0
05-19 [Link].768 918 7888 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].768 918 7888 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].768 918 7888 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].768 918 7888 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].768 918 7888 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].806 918 7846 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7846
05-19 [Link].807 918 7846 I mtkpower_client: ret_hdl:27738
05-19 [Link].808 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27738 hint:-1
pid:918 duration:0 => ret_hdl:27738
05-19 [Link].808 479 1594 I libPowerHal: [PE] scn:5 hdl:27738
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].961 918 7841 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].983 918 7893 I mtkpower_client: perf_lock_rel, hdl:27737,
tid:7893
05-19 [Link].983 918 7893 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7893
05-19 [Link].984 479 1594 I libPowerHal: [PD] scn:4 hdl:27737
lock_user:[email protected] pid:918 tid:7894 dur:0
05-19 [Link].985 918 7893 I mtkpower_client: ret_hdl:27739
05-19 [Link].986 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27739 hint:-1
pid:918 duration:0 => ret_hdl:27739
05-19 [Link].986 479 1594 I libPowerHal: [PE] scn:6 hdl:27739
lock_user:[email protected] pid:918 tid:7893 dur:0
05-19 [Link].988 918 7841 I mtkpower_client: perf_lock_rel, hdl:27738,
tid:7841
05-19 [Link].989 918 7841 I mtkpower_client: perf_lock_rel, hdl:27730,
tid:7841
05-19 [Link].989 918 7841 I mtkpower_client: perf_lock_rel, hdl:27729,
tid:7841
05-19 [Link].989 918 7841 I mtkpower_client: perf_lock_rel, hdl:27728,
tid:7841
05-19 [Link].989 918 7841 I mtkpower_client: perf_lock_rel, hdl:27727,
tid:7841
05-19 [Link].989 479 1594 I libPowerHal: [PD] scn:5 hdl:27738
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].991 479 1594 I libPowerHal: [PD] scn:3 hdl:27730
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].992 479 1594 I libPowerHal: [PD] scn:2 hdl:27729
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].994 479 1594 I libPowerHal: [PD] scn:1 hdl:27728
lock_user:[email protected] pid:918 tid:7846 dur:0
05-19 [Link].599 918 32757 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].599 918 32757 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 918 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].602 918 918 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 918 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].602 918 11689 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].603 918 13399 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].641 918 7932 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].641 918 7932 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].641 918 7932 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].642 918 7932 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].642 918 7932 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 62150
05-19 [Link].642 918 7932 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].642 918 7932 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].645 918 7937 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7937
05-19 [Link].646 918 7937 I mtkpower_client: ret_hdl:27745
05-19 [Link].646 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27745 hint:-1
pid:918 duration:0 => ret_hdl:27745
05-19 [Link].647 479 1594 I libPowerHal: [PE] scn:2 hdl:27745
lock_user:[email protected] pid:918 tid:7937 dur:0
05-19 [Link].653 918 7932 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].653 918 7932 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].653 918 7932 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].653 918 7932 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].653 918 7932 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].920 918 7887 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].934 918 7887 I mtkpower_client: perf_lock_rel, hdl:27739,
tid:7887
05-19 [Link].935 918 7887 I mtkpower_client: perf_lock_rel, hdl:27737,
tid:7887
05-19 [Link].935 479 1594 I libPowerHal: [PD] scn:6 hdl:27739
lock_user:[email protected] pid:918 tid:7893 dur:0
05-19 [Link].067 918 7936 I mtkpower_client: perf_lock_rel, hdl:27745,
tid:7936
05-19 [Link].067 918 7936 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7936
05-19 [Link].068 479 1594 I libPowerHal: [PD] scn:2 hdl:27745
lock_user:[email protected] pid:918 tid:7937 dur:0
05-19 [Link].069 918 7936 I mtkpower_client: ret_hdl:27746
05-19 [Link].069 918 7936 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7936
05-19 [Link].069 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27746 hint:-1
pid:918 duration:0 => ret_hdl:27746
05-19 [Link].069 479 1594 I libPowerHal: [PE] scn:1 hdl:27746
lock_user:[email protected] pid:918 tid:7936 dur:0
05-19 [Link].069 918 7936 I mtkpower_client: ret_hdl:27747
05-19 [Link].070 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27747 hint:-1
pid:918 duration:0 => ret_hdl:27747
05-19 [Link].070 479 1594 I libPowerHal: [PE] scn:2 hdl:27747
lock_user:[email protected] pid:918 tid:7936 dur:0
05-19 [Link].175 918 7936 I mtkpower_client: perf_lock_rel, hdl:27747,
tid:7936
05-19 [Link].177 479 1594 I libPowerHal: [PD] scn:2 hdl:27747
lock_user:[email protected] pid:918 tid:7936 dur:0
05-19 [Link].837 918 1064 E OMXNodeInstance:
setParameter(0xea484804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].837 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].841 918 1064 E MtkOmxVdecEx: [0xea484800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].841 918 1064 E OMXNodeInstance:
setConfig(0xea484804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].843 918 1064 E OMXNodeInstance:
getParameter(0xea484804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].843 918 1064 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].844 918 1064 E OMXNodeInstance:
getConfig(0xea484804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].897 918 8000 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ae810
05-19 [Link].897 918 8000 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].897 918 8000 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].898 918 8000 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].899 918 8000 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 23334
05-19 [Link].899 918 8000 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1ff3000
05-19 [Link].899 918 8000 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].906 918 8007 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8007
05-19 [Link].907 918 8007 I mtkpower_client: ret_hdl:27753
05-19 [Link].908 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27753 hint:-1
pid:918 duration:0 => ret_hdl:27753
05-19 [Link].908 479 1594 I libPowerHal: [PE] scn:3 hdl:27753
lock_user:[email protected] pid:918 tid:8007 dur:0
05-19 [Link].912 918 8000 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].912 918 8000 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].912 918 8000 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].912 918 8000 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].912 918 8000 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].995 918 7936 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:7936
05-19 [Link].997 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27754 hint:-1
pid:918 duration:0 => ret_hdl:27754
05-19 [Link].997 479 1594 I libPowerHal: [PE] scn:2 hdl:27754
lock_user:[email protected] pid:918 tid:7936 dur:0
05-19 [Link].997 918 7936 I mtkpower_client: ret_hdl:27754
05-19 [Link].199 918 7931 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].221 918 7931 I mtkpower_client: perf_lock_rel, hdl:27754,
tid:7931
05-19 [Link].221 918 7931 I mtkpower_client: perf_lock_rel, hdl:27746,
tid:7931
05-19 [Link].221 918 7931 I mtkpower_client: perf_lock_rel, hdl:27745,
tid:7931
05-19 [Link].221 479 1594 I libPowerHal: [PD] scn:2 hdl:27754
lock_user:[email protected] pid:918 tid:7936 dur:0
05-19 [Link].232 479 1594 I libPowerHal: [PD] scn:1 hdl:27746
lock_user:[email protected] pid:918 tid:7936 dur:0
05-19 [Link].362 918 8006 I mtkpower_client: perf_lock_rel, hdl:27753,
tid:8006
05-19 [Link].363 918 8006 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8006
05-19 [Link].363 479 1594 I libPowerHal: [PD] scn:3 hdl:27753
lock_user:[email protected] pid:918 tid:8007 dur:0
05-19 [Link].365 918 8006 I mtkpower_client: ret_hdl:27755
05-19 [Link].365 918 8006 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8006
05-19 [Link].365 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27755 hint:-1
pid:918 duration:0 => ret_hdl:27755
05-19 [Link].365 479 1594 I libPowerHal: [PE] scn:1 hdl:27755
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].366 918 8006 I mtkpower_client: ret_hdl:27756
05-19 [Link].366 918 8006 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8006
05-19 [Link].366 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27756 hint:-1
pid:918 duration:0 => ret_hdl:27756
05-19 [Link].366 479 1594 I libPowerHal: [PE] scn:2 hdl:27756
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].367 918 8006 I mtkpower_client: ret_hdl:27757
05-19 [Link].367 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27757 hint:-1
pid:918 duration:0 => ret_hdl:27757
05-19 [Link].367 479 1594 I libPowerHal: [PE] scn:3 hdl:27757
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].610 918 8006 I mtkpower_client: perf_lock_rel, hdl:27757,
tid:8006
05-19 [Link].611 479 1594 I libPowerHal: [PD] scn:3 hdl:27757
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].751 918 8006 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8006
05-19 [Link].752 918 8006 I mtkpower_client: ret_hdl:27759
05-19 [Link].752 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27759 hint:-1
pid:918 duration:0 => ret_hdl:27759
05-19 [Link].752 479 1594 I libPowerHal: [PE] scn:0 hdl:27759
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].830 918 8006 I mtkpower_client: perf_lock_rel, hdl:27759,
tid:8006
05-19 [Link].831 479 1594 I libPowerHal: [PD] scn:0 hdl:27759
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].896 918 8006 I mtkpower_client: perf_lock_rel, hdl:27756,
tid:8006
05-19 [Link].899 479 1594 I libPowerHal: [PD] scn:2 hdl:27756
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].928 918 1960 E OMXNodeInstance:
setParameter(0xea2e2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].928 918 1960 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].930 918 918 E MtkOmxVdecEx: [0xea2e2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].930 918 918 E OMXNodeInstance:
setConfig(0xea2e2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].930 918 918 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].930 918 9097 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].931 918 1064 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].970 918 8047 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].971 918 8047 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].971 918 8047 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].972 918 8047 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].972 918 8047 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 60424
05-19 [Link].972 918 8047 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].972 918 8047 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].976 918 8051 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8051
05-19 [Link].977 918 8051 I mtkpower_client: ret_hdl:27764
05-19 [Link].977 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27764 hint:-1
pid:918 duration:0 => ret_hdl:27764
05-19 [Link].977 479 1594 I libPowerHal: [PE] scn:0 hdl:27764
lock_user:[email protected] pid:918 tid:8051 dur:0
05-19 [Link].993 918 8047 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].993 918 8047 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].993 918 8047 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].993 918 8047 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].993 918 8047 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].286 918 7999 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].324 918 7999 I mtkpower_client: perf_lock_rel, hdl:27759,
tid:7999
05-19 [Link].324 918 7999 I mtkpower_client: perf_lock_rel, hdl:27756,
tid:7999
05-19 [Link].324 918 7999 I mtkpower_client: perf_lock_rel, hdl:27755,
tid:7999
05-19 [Link].324 918 7999 I mtkpower_client: perf_lock_rel, hdl:27753,
tid:7999
05-19 [Link].328 479 1594 I libPowerHal: [PD] scn:1 hdl:27755
lock_user:[email protected] pid:918 tid:8006 dur:0
05-19 [Link].446 918 8050 I mtkpower_client: perf_lock_rel, hdl:27764,
tid:8050
05-19 [Link].447 918 8050 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8050
05-19 [Link].448 479 1594 I libPowerHal: [PD] scn:0 hdl:27764
lock_user:[email protected] pid:918 tid:8051 dur:0
05-19 [Link].451 918 8050 I mtkpower_client: ret_hdl:27765
05-19 [Link].452 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27765 hint:-1
pid:918 duration:0 => ret_hdl:27765
05-19 [Link].452 479 1594 I libPowerHal: [PE] scn:0 hdl:27765
lock_user:[email protected] pid:918 tid:8050 dur:0
05-19 [Link].333 918 9097 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].334 918 15680 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 1064 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].337 918 1064 E OMXNodeInstance:
setConfig(0xea0d1804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 1064 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].338 918 1064 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].339 918 1064 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].450 918 8097 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ae810
05-19 [Link].450 918 8097 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].450 918 8097 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].451 918 8097 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].451 918 8097 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 54347
05-19 [Link].451 918 8097 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe215c000
05-19 [Link].451 918 8097 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].453 918 8101 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8101
05-19 [Link].454 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27771 hint:-1
pid:918 duration:0 => ret_hdl:27771
05-19 [Link].454 479 1594 I libPowerHal: [PE] scn:2 hdl:27771
lock_user:[email protected] pid:918 tid:8101 dur:0
05-19 [Link].455 918 8101 I mtkpower_client: ret_hdl:27771
05-19 [Link].468 918 8097 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].468 918 8097 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].468 918 8097 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].468 918 8097 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].468 918 8097 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].495 918 8046 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].508 918 8046 I mtkpower_client: perf_lock_rel, hdl:27765,
tid:8046
05-19 [Link].509 918 8046 I mtkpower_client: perf_lock_rel, hdl:27764,
tid:8046
05-19 [Link].509 479 1594 I libPowerHal: [PD] scn:0 hdl:27765
lock_user:[email protected] pid:918 tid:8050 dur:0
05-19 [Link].729 918 8100 I mtkpower_client: perf_lock_rel, hdl:27771,
tid:8100
05-19 [Link].729 918 8100 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8100
05-19 [Link].730 479 1594 I libPowerHal: [PD] scn:2 hdl:27771
lock_user:[email protected] pid:918 tid:8101 dur:0
05-19 [Link].731 918 8100 I mtkpower_client: ret_hdl:27772
05-19 [Link].731 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27772 hint:-1
pid:918 duration:0 => ret_hdl:27772
05-19 [Link].731 479 1594 I libPowerHal: [PE] scn:0 hdl:27772
lock_user:[email protected] pid:918 tid:8100 dur:0
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: getOutputForAttrInt()
device {type:0x4,@:}, sampling rate 44100, format 0x1, channel mask 0x3, flags 0x8
stream AUDIO_STREAM_MUSIC
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: selectOutput new
bestOutput 13 criteria 0 0 0 0 0 0 2 2
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: selectOutput new
bestOutput 21 criteria 0 0 0 0 0 1 2 0
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: getNewOutputDevices
selected devices AUDIO_DEVICE_NONE
05-19 [Link].918 507 1512 V APM_AudioPolicyManager: getOutputForAttrInt
returns output 21 selectedDeviceId 878
05-19 [Link].655 918 1064 E OMXNodeInstance:
setParameter(0xea2b0804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].655 918 1064 E OMXNodeInstance:
getParameter(0xea2b0804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].657 918 15538 E MtkOmxVdecEx: [0xea2b0800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].658 918 15538 E OMXNodeInstance:
setConfig(0xea2b0804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].658 918 11716 E OMXNodeInstance:
getParameter(0xea2b0804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].658 918 15680 E OMXNodeInstance:
getConfig(0xea2b0804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].659 918 918 E OMXNodeInstance:
getConfig(0xea2b0804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].766 918 8143 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].766 918 8143 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].766 918 8143 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].767 918 8143 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].767 918 8143 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 34241
05-19 [Link].767 918 8143 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].767 918 8143 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].774 918 8150 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8150
05-19 [Link].775 918 8150 I mtkpower_client: ret_hdl:27778
05-19 [Link].775 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27778 hint:-1
pid:918 duration:0 => ret_hdl:27778
05-19 [Link].775 479 1594 I libPowerHal: [PE] scn:2 hdl:27778
lock_user:[email protected] pid:918 tid:8150 dur:0
05-19 [Link].778 918 8143 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].778 918 8143 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].778 918 8143 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].778 918 8143 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].778 918 8143 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].936 918 8096 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].948 918 8096 I mtkpower_client: perf_lock_rel, hdl:27772,
tid:8096
05-19 [Link].949 918 8096 I mtkpower_client: perf_lock_rel, hdl:27771,
tid:8096
05-19 [Link].950 479 1594 I libPowerHal: [PD] scn:0 hdl:27772
lock_user:[email protected] pid:918 tid:8100 dur:0
05-19 [Link].035 918 8149 I mtkpower_client: perf_lock_rel, hdl:27778,
tid:8149
05-19 [Link].035 918 8149 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8149
05-19 [Link].036 479 1594 I libPowerHal: [PD] scn:2 hdl:27778
lock_user:[email protected] pid:918 tid:8150 dur:0
05-19 [Link].037 918 8149 I mtkpower_client: ret_hdl:27779
05-19 [Link].037 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27779 hint:-1
pid:918 duration:0 => ret_hdl:27779
05-19 [Link].037 479 1594 I libPowerHal: [PE] scn:0 hdl:27779
lock_user:[email protected] pid:918 tid:8149 dur:0
05-19 [Link].443 918 8149 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8149
05-19 [Link].443 918 8149 I mtkpower_client: ret_hdl:27785
05-19 [Link].444 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27785 hint:-1
pid:918 duration:0 => ret_hdl:27785
05-19 [Link].444 479 1594 I libPowerHal: [PE] scn:1 hdl:27785
lock_user:[email protected] pid:918 tid:8149 dur:0
05-19 [Link].505 918 6021 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].505 918 6021 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].509 918 32757 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].509 918 32757 E OMXNodeInstance:
setConfig(0xea0d1804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 32757 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 11716 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 1820 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].554 918 8191 E VDO_LOG : GetDecoderAPI hWrapper 0xe9fc7810
05-19 [Link].554 918 8191 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].554 918 8191 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].555 918 8191 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].555 918 8191 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 55476
05-19 [Link].555 918 8191 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1ff3000
05-19 [Link].555 918 8191 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].558 918 8195 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8195
05-19 [Link].559 918 8195 I mtkpower_client: ret_hdl:27786
05-19 [Link].559 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27786 hint:-1
pid:918 duration:0 => ret_hdl:27786
05-19 [Link].559 479 1594 I libPowerHal: [PE] scn:3 hdl:27786
lock_user:[email protected] pid:918 tid:8195 dur:0
05-19 [Link].576 918 8191 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].578 918 8191 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].578 918 8191 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].578 918 8191 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].578 918 8191 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].759 918 8142 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].774 918 8142 I mtkpower_client: perf_lock_rel, hdl:27785,
tid:8142
05-19 [Link].774 918 8142 I mtkpower_client: perf_lock_rel, hdl:27779,
tid:8142
05-19 [Link].774 918 8142 I mtkpower_client: perf_lock_rel, hdl:27778,
tid:8142
05-19 [Link].775 479 1594 I libPowerHal: [PD] scn:1 hdl:27785
lock_user:[email protected] pid:918 tid:8149 dur:0
05-19 [Link].777 479 1594 I libPowerHal: [PD] scn:0 hdl:27779
lock_user:[email protected] pid:918 tid:8149 dur:0
05-19 [Link].973 918 8194 I mtkpower_client: perf_lock_rel, hdl:27786,
tid:8194
05-19 [Link].974 918 8194 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8194
05-19 [Link].974 479 1594 I libPowerHal: [PD] scn:3 hdl:27786
lock_user:[email protected] pid:918 tid:8195 dur:0
05-19 [Link].976 918 8194 I mtkpower_client: ret_hdl:27787
05-19 [Link].976 918 8194 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8194
05-19 [Link].976 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27787 hint:-1
pid:918 duration:0 => ret_hdl:27787
05-19 [Link].976 479 1594 I libPowerHal: [PE] scn:0 hdl:27787
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].977 918 8194 I mtkpower_client: ret_hdl:27788
05-19 [Link].977 918 8194 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8194
05-19 [Link].977 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27788 hint:-1
pid:918 duration:0 => ret_hdl:27788
05-19 [Link].977 479 1594 I libPowerHal: [PE] scn:1 hdl:27788
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].977 918 8194 I mtkpower_client: ret_hdl:27789
05-19 [Link].978 918 8194 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8194
05-19 [Link].978 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27789 hint:-1
pid:918 duration:0 => ret_hdl:27789
05-19 [Link].978 479 1594 I libPowerHal: [PE] scn:3 hdl:27789
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].978 918 8194 I mtkpower_client: ret_hdl:27790
05-19 [Link].979 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27790 hint:-1
pid:918 duration:0 => ret_hdl:27790
05-19 [Link].979 479 1594 I libPowerHal: [PE] scn:4 hdl:27790
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].067 918 8194 I mtkpower_client: perf_lock_rel, hdl:27790,
tid:8194
05-19 [Link].068 479 1594 I libPowerHal: [PD] scn:4 hdl:27790
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].330 918 1085 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].330 918 1085 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].336 918 1085 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].336 918 1085 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 1085 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 11716 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].337 918 11716 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].371 918 8194 I mtkpower_client: perf_lock_rel, hdl:27789,
tid:8194
05-19 [Link].372 479 1594 I libPowerHal: [PD] scn:3 hdl:27789
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].450 918 8238 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].450 918 8238 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].450 918 8238 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].451 918 8238 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].451 918 8238 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 37983
05-19 [Link].451 918 8238 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2c24000
05-19 [Link].451 918 8238 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].456 918 8245 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8245
05-19 [Link].457 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27796 hint:-1
pid:918 duration:0 => ret_hdl:27796
05-19 [Link].457 479 1594 I libPowerHal: [PE] scn:2 hdl:27796
lock_user:[email protected] pid:918 tid:8245 dur:0
05-19 [Link].458 918 8245 I mtkpower_client: ret_hdl:27796
05-19 [Link].469 918 8238 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].469 918 8238 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].469 918 8238 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].469 918 8238 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].469 918 8238 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].524 918 8194 I mtkpower_client: perf_lock_rel, hdl:27788,
tid:8194
05-19 [Link].525 479 1594 I libPowerHal: [PD] scn:1 hdl:27788
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].572 918 8190 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].616 918 8190 I mtkpower_client: perf_lock_rel, hdl:27790,
tid:8190
05-19 [Link].616 918 8190 I mtkpower_client: perf_lock_rel, hdl:27789,
tid:8190
05-19 [Link].617 918 8190 I mtkpower_client: perf_lock_rel, hdl:27788,
tid:8190
05-19 [Link].617 918 8190 I mtkpower_client: perf_lock_rel, hdl:27787,
tid:8190
05-19 [Link].617 918 8190 I mtkpower_client: perf_lock_rel, hdl:27786,
tid:8190
05-19 [Link].620 479 1594 I libPowerHal: [PD] scn:0 hdl:27787
lock_user:[email protected] pid:918 tid:8194 dur:0
05-19 [Link].786 918 8244 I mtkpower_client: perf_lock_rel, hdl:27796,
tid:8244
05-19 [Link].786 918 8244 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8244
05-19 [Link].787 479 1594 I libPowerHal: [PD] scn:2 hdl:27796
lock_user:[email protected] pid:918 tid:8245 dur:0
05-19 [Link].789 918 8244 I mtkpower_client: ret_hdl:27800
05-19 [Link].789 918 8244 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8244
05-19 [Link].789 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27800 hint:-1
pid:918 duration:0 => ret_hdl:27800
05-19 [Link].789 479 1594 I libPowerHal: [PE] scn:4 hdl:27800
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].790 918 8244 I mtkpower_client: ret_hdl:27801
05-19 [Link].791 918 8244 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8244
05-19 [Link].791 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27801 hint:-1
pid:918 duration:0 => ret_hdl:27801
05-19 [Link].791 479 1594 I libPowerHal: [PE] scn:2 hdl:27801
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].792 918 8244 I mtkpower_client: ret_hdl:27802
05-19 [Link].792 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27802 hint:-1
pid:918 duration:0 => ret_hdl:27802
05-19 [Link].792 479 1594 I libPowerHal: [PE] scn:5 hdl:27802
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].909 918 11716 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].910 918 1820 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].914 918 1820 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].914 918 1820 E OMXNodeInstance:
setConfig(0xea0d1804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].916 918 1721 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].916 918 6021 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].918 918 11716 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].966 918 8244 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8244
05-19 [Link].967 918 8244 I mtkpower_client: ret_hdl:27805
05-19 [Link].967 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27805 hint:-1
pid:918 duration:0 => ret_hdl:27805
05-19 [Link].967 479 1594 I libPowerHal: [PE] scn:1 hdl:27805
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].977 918 8297 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ae810
05-19 [Link].977 918 8297 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].977 918 8297 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].978 918 8297 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].978 918 8297 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 41254
05-19 [Link].978 918 8297 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1cf0000
05-19 [Link].978 918 8297 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].985 918 8304 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8304
05-19 [Link].993 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27806 hint:-1
pid:918 duration:0 => ret_hdl:27806
05-19 [Link].993 479 1594 I libPowerHal: [PE] scn:3 hdl:27806
lock_user:[email protected] pid:918 tid:8304 dur:0
05-19 [Link].010 918 8304 I mtkpower_client: ret_hdl:27806
05-19 [Link].014 918 8297 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].014 918 8297 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].014 918 8297 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].014 918 8297 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].014 918 8297 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].268 918 8237 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].294 918 8237 I mtkpower_client: perf_lock_rel, hdl:27805,
tid:8237
05-19 [Link].295 479 1594 I libPowerHal: [PD] scn:1 hdl:27805
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].296 918 8237 I mtkpower_client: perf_lock_rel, hdl:27802,
tid:8237
05-19 [Link].297 479 1594 I libPowerHal: [PD] scn:5 hdl:27802
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].297 918 8237 I mtkpower_client: perf_lock_rel, hdl:27801,
tid:8237
05-19 [Link].298 918 8237 I mtkpower_client: perf_lock_rel, hdl:27800,
tid:8237
05-19 [Link].298 918 8237 I mtkpower_client: perf_lock_rel, hdl:27796,
tid:8237
05-19 [Link].298 479 1594 I libPowerHal: [PD] scn:2 hdl:27801
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].299 479 1594 I libPowerHal: [PD] scn:4 hdl:27800
lock_user:[email protected] pid:918 tid:8244 dur:0
05-19 [Link].473 918 8303 I mtkpower_client: perf_lock_rel, hdl:27806,
tid:8303
05-19 [Link].475 479 1594 I libPowerHal: [PD] scn:3 hdl:27806
lock_user:[email protected] pid:918 tid:8304 dur:0
05-19 [Link].475 918 8303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8303
05-19 [Link].476 918 8303 I mtkpower_client: ret_hdl:27807
05-19 [Link].476 918 8303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8303
05-19 [Link].476 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27807 hint:-1
pid:918 duration:0 => ret_hdl:27807
05-19 [Link].476 479 1594 I libPowerHal: [PE] scn:1 hdl:27807
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].477 918 8303 I mtkpower_client: ret_hdl:27808
05-19 [Link].477 918 8303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8303
05-19 [Link].477 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27808 hint:-1
pid:918 duration:0 => ret_hdl:27808
05-19 [Link].477 479 1594 I libPowerHal: [PE] scn:2 hdl:27808
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].478 918 8303 I mtkpower_client: ret_hdl:27809
05-19 [Link].478 918 8303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8303
05-19 [Link].479 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27809 hint:-1
pid:918 duration:0 => ret_hdl:27809
05-19 [Link].479 479 1594 I libPowerHal: [PE] scn:3 hdl:27809
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].483 918 8303 I mtkpower_client: ret_hdl:27811
05-19 [Link].483 918 8303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8303
05-19 [Link].483 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27811 hint:-1
pid:918 duration:0 => ret_hdl:27811
05-19 [Link].484 479 1594 I libPowerHal: [PE] scn:5 hdl:27811
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].485 918 8303 I mtkpower_client: ret_hdl:27812
05-19 [Link].485 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27812 hint:-1
pid:918 duration:0 => ret_hdl:27812
05-19 [Link].485 918 8303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8303
05-19 [Link].485 479 1594 I libPowerHal: [PE] scn:6 hdl:27812
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].486 918 8303 I mtkpower_client: ret_hdl:27813
05-19 [Link].486 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27813 hint:-1
pid:918 duration:0 => ret_hdl:27813
05-19 [Link].487 479 1594 I libPowerHal: [PE] scn:0 hdl:27813
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].540 918 8303 I mtkpower_client: perf_lock_rel, hdl:27813,
tid:8303
05-19 [Link].542 918 8303 I mtkpower_client: perf_lock_rel, hdl:27812,
tid:8303
05-19 [Link].542 479 1594 I libPowerHal: [PD] scn:0 hdl:27813
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].543 479 1594 I libPowerHal: [PD] scn:6 hdl:27812
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].774 918 1780 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].775 918 1780 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].779 918 1780 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].779 918 1780 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].780 918 1780 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].780 918 1780 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].781 918 1780 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].798 918 8303 I mtkpower_client: perf_lock_rel, hdl:27811,
tid:8303
05-19 [Link].799 479 1594 I libPowerHal: [PD] scn:5 hdl:27811
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].819 918 8346 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].820 918 8346 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].820 918 8346 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].820 918 8346 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].820 918 8346 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 63642
05-19 [Link].820 918 8346 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2abb000
05-19 [Link].820 918 8346 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].823 918 8350 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8350
05-19 [Link].824 918 8350 I mtkpower_client: ret_hdl:27818
05-19 [Link].826 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27818 hint:-1
pid:918 duration:0 => ret_hdl:27818
05-19 [Link].826 479 1594 I libPowerHal: [PE] scn:5 hdl:27818
lock_user:[email protected] pid:918 tid:8350 dur:0
05-19 [Link].847 918 8346 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].847 918 8346 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].847 918 8346 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].847 918 8346 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].847 918 8346 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].027 918 8296 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].057 918 8296 I mtkpower_client: perf_lock_rel, hdl:27813,
tid:8296
05-19 [Link].057 918 8296 I mtkpower_client: perf_lock_rel, hdl:27812,
tid:8296
05-19 [Link].058 918 8296 I mtkpower_client: perf_lock_rel, hdl:27811,
tid:8296
05-19 [Link].058 918 8296 I mtkpower_client: perf_lock_rel, hdl:27809,
tid:8296
05-19 [Link].058 918 8296 I mtkpower_client: perf_lock_rel, hdl:27808,
tid:8296
05-19 [Link].058 918 8296 I mtkpower_client: perf_lock_rel, hdl:27807,
tid:8296
05-19 [Link].058 918 8296 I mtkpower_client: perf_lock_rel, hdl:27806,
tid:8296
05-19 [Link].062 479 1594 I libPowerHal: [PD] scn:3 hdl:27809
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].064 479 1594 I libPowerHal: [PD] scn:2 hdl:27808
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].065 479 1594 I libPowerHal: [PD] scn:1 hdl:27807
lock_user:[email protected] pid:918 tid:8303 dur:0
05-19 [Link].213 918 8349 I mtkpower_client: perf_lock_rel, hdl:27818,
tid:8349
05-19 [Link].213 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].214 479 1594 I libPowerHal: [PD] scn:5 hdl:27818
lock_user:[email protected] pid:918 tid:8350 dur:0
05-19 [Link].216 918 8349 I mtkpower_client: ret_hdl:27819
05-19 [Link].216 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27819 hint:-1
pid:918 duration:0 => ret_hdl:27819
05-19 [Link].216 479 1594 I libPowerHal: [PE] scn:1 hdl:27819
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].386 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].388 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27820 hint:-1
pid:918 duration:0 => ret_hdl:27820
05-19 [Link].388 479 1594 I libPowerHal: [PE] scn:2 hdl:27820
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].388 918 8349 I mtkpower_client: ret_hdl:27820
05-19 [Link].388 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].389 918 8349 I mtkpower_client: ret_hdl:27821
05-19 [Link].390 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27821 hint:-1
pid:918 duration:0 => ret_hdl:27821
05-19 [Link].390 479 1594 I libPowerHal: [PE] scn:3 hdl:27821
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].794 918 9097 E OMXNodeInstance:
setParameter(0xea157804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].795 918 9097 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].798 918 1960 E MtkOmxVdecEx: [0xea157800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].798 918 1960 E OMXNodeInstance:
setConfig(0xea157804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].799 918 1780 E OMXNodeInstance:
getParameter(0xea157804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].800 918 1960 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].801 918 1960 E OMXNodeInstance:
getConfig(0xea157804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].841 918 8390 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ae810
05-19 [Link].841 918 8390 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].841 918 8390 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].842 918 8390 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].842 918 8390 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 106503
05-19 [Link].842 918 8390 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1df5000
05-19 [Link].842 918 8390 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].848 918 8395 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8395
05-19 [Link].849 918 8395 I mtkpower_client: ret_hdl:27825
05-19 [Link].849 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27825 hint:-1
pid:918 duration:0 => ret_hdl:27825
05-19 [Link].849 479 1594 I libPowerHal: [PE] scn:0 hdl:27825
lock_user:[email protected] pid:918 tid:8395 dur:0
05-19 [Link].856 918 8390 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].856 918 8390 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].856 918 8390 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].856 918 8390 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].856 918 8390 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].918 23232 8422 E FMQ : grantorIdx must be less than 3
05-19 [Link].918 23232 8422 E FMQ : grantorIdx must be less than 3
05-19 [Link].118 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].122 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27826 hint:-1
pid:918 duration:0 => ret_hdl:27826
05-19 [Link].122 479 1594 I libPowerHal: [PE] scn:6 hdl:27826
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].123 918 8349 I mtkpower_client: ret_hdl:27826
05-19 [Link].329 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].330 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27829 hint:-1
pid:918 duration:0 => ret_hdl:27829
05-19 [Link].330 918 8349 I mtkpower_client: ret_hdl:27829
05-19 [Link].330 479 1594 I libPowerHal: [PE] scn:5 hdl:27829
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].330 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].332 918 8349 I mtkpower_client: ret_hdl:27830
05-19 [Link].332 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].332 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:27830 hint:-1
pid:918 duration:0 => ret_hdl:27830
05-19 [Link].332 479 1594 I libPowerHal: [PE] scn:8 hdl:27830
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].333 918 8349 I mtkpower_client: ret_hdl:27831
05-19 [Link].333 918 8349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8349
05-19 [Link].333 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:27831 hint:-1
pid:918 duration:0 => ret_hdl:27831
05-19 [Link].333 479 1594 I libPowerHal: [PE] scn:9 hdl:27831
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].334 918 8349 I mtkpower_client: ret_hdl:27832
05-19 [Link].334 479 1594 I libPowerHal: [perfLockAcq] idx:10 hdl:27832 hint:-
1 pid:918 duration:0 => ret_hdl:27832
05-19 [Link].334 479 1594 I libPowerHal: [PE] scn:10 hdl:27832
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].612 918 8345 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].645 918 8345 I mtkpower_client: perf_lock_rel, hdl:27832,
tid:8345
05-19 [Link].646 918 8345 I mtkpower_client: perf_lock_rel, hdl:27831,
tid:8345
05-19 [Link].647 918 8345 I mtkpower_client: perf_lock_rel, hdl:27830,
tid:8345
05-19 [Link].647 479 1594 I libPowerHal: [PD] scn:10 hdl:27832
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].647 918 8345 I mtkpower_client: perf_lock_rel, hdl:27829,
tid:8345
05-19 [Link].647 918 8345 I mtkpower_client: perf_lock_rel, hdl:27826,
tid:8345
05-19 [Link].647 918 8345 I mtkpower_client: perf_lock_rel, hdl:27821,
tid:8345
05-19 [Link].647 918 8345 I mtkpower_client: perf_lock_rel, hdl:27820,
tid:8345
05-19 [Link].647 918 8345 I mtkpower_client: perf_lock_rel, hdl:27819,
tid:8345
05-19 [Link].648 918 8345 I mtkpower_client: perf_lock_rel, hdl:27818,
tid:8345
05-19 [Link].649 479 1594 I libPowerHal: [PD] scn:9 hdl:27831
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].662 479 1594 I libPowerHal: [PD] scn:8 hdl:27830
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].664 479 1594 I libPowerHal: [PD] scn:5 hdl:27829
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].666 479 1594 I libPowerHal: [PD] scn:6 hdl:27826
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].667 479 1594 I libPowerHal: [PD] scn:3 hdl:27821
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].669 479 1594 I libPowerHal: [PD] scn:2 hdl:27820
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].671 479 1594 I libPowerHal: [PD] scn:1 hdl:27819
lock_user:[email protected] pid:918 tid:8349 dur:0
05-19 [Link].681 918 8393 I mtkpower_client: perf_lock_rel, hdl:27825,
tid:8393
05-19 [Link].681 918 8393 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8393
05-19 [Link].682 479 1594 I libPowerHal: [PD] scn:0 hdl:27825
lock_user:[email protected] pid:918 tid:8395 dur:0
05-19 [Link].683 918 8393 I mtkpower_client: ret_hdl:27833
05-19 [Link].683 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27833 hint:-1
pid:918 duration:0 => ret_hdl:27833
05-19 [Link].683 479 1594 I libPowerHal: [PE] scn:0 hdl:27833
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].868 918 8393 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8393
05-19 [Link].869 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27834 hint:-1
pid:918 duration:0 => ret_hdl:27834
05-19 [Link].869 479 1594 I libPowerHal: [PE] scn:1 hdl:27834
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].870 918 8393 I mtkpower_client: ret_hdl:27834
05-19 [Link].870 918 8393 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8393
05-19 [Link].871 918 8393 I mtkpower_client: ret_hdl:27835
05-19 [Link].871 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27835 hint:-1
pid:918 duration:0 => ret_hdl:27835
05-19 [Link].871 479 1594 I libPowerHal: [PE] scn:2 hdl:27835
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].986 918 8393 I mtkpower_client: perf_lock_rel, hdl:27835,
tid:8393
05-19 [Link].988 479 1594 I libPowerHal: [PD] scn:2 hdl:27835
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].137 918 8393 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8393
05-19 [Link].139 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27841 hint:-1
pid:918 duration:0 => ret_hdl:27841
05-19 [Link].139 479 1594 I libPowerHal: [PE] scn:3 hdl:27841
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].140 918 8393 I mtkpower_client: ret_hdl:27841
05-19 [Link].294 918 1721 E OMXNodeInstance:
setParameter(0xe9ec4804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].295 918 1721 E OMXNodeInstance:
getParameter(0xe9ec4804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].299 918 1960 E MtkOmxVdecEx: [0xe9ec4800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].299 918 1960 E OMXNodeInstance:
setConfig(0xe9ec4804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].299 918 11717 E OMXNodeInstance:
getParameter(0xe9ec4804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].300 918 1959 E OMXNodeInstance:
getConfig(0xe9ec4804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].301 918 1780 E OMXNodeInstance:
getConfig(0xe9ec4804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].349 918 8389 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].362 918 8445 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].363 918 8445 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].363 918 8445 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].364 918 8445 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].364 918 8445 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 17348
05-19 [Link].364 918 8445 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe245f000
05-19 [Link].364 918 8445 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].377 918 8449 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8449
05-19 [Link].378 918 8389 I mtkpower_client: perf_lock_rel, hdl:27841,
tid:8389
05-19 [Link].378 918 8449 I mtkpower_client: ret_hdl:27842
05-19 [Link].378 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27842 hint:-1
pid:918 duration:0 => ret_hdl:27842
05-19 [Link].378 479 1594 I libPowerHal: [PE] scn:4 hdl:27842
lock_user:[email protected] pid:918 tid:8449 dur:0
05-19 [Link].381 479 1594 I libPowerHal: [PD] scn:3 hdl:27841
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].382 918 8389 I mtkpower_client: perf_lock_rel, hdl:27834,
tid:8389
05-19 [Link].383 479 1594 I libPowerHal: [PD] scn:1 hdl:27834
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].383 918 8389 I mtkpower_client: perf_lock_rel, hdl:27833,
tid:8389
05-19 [Link].383 918 8389 I mtkpower_client: perf_lock_rel, hdl:27825,
tid:8389
05-19 [Link].384 479 1594 I libPowerHal: [PD] scn:0 hdl:27833
lock_user:[email protected] pid:918 tid:8393 dur:0
05-19 [Link].412 918 8445 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].414 918 8445 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].414 918 8445 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].414 918 8445 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].414 918 8445 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].678 918 8448 I mtkpower_client: perf_lock_rel, hdl:27842,
tid:8448
05-19 [Link].678 918 8448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8448
05-19 [Link].678 479 1594 I libPowerHal: [PD] scn:4 hdl:27842
lock_user:[email protected] pid:918 tid:8449 dur:0
05-19 [Link].679 918 8448 I mtkpower_client: ret_hdl:27843
05-19 [Link].680 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27843 hint:-1
pid:918 duration:0 => ret_hdl:27843
05-19 [Link].680 479 1594 I libPowerHal: [PE] scn:0 hdl:27843
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].808 918 8448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8448
05-19 [Link].809 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27844 hint:-1
pid:918 duration:0 => ret_hdl:27844
05-19 [Link].809 479 1594 I libPowerHal: [PE] scn:1 hdl:27844
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].810 918 8448 I mtkpower_client: ret_hdl:27844
05-19 [Link].019 918 8448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8448
05-19 [Link].021 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27846 hint:-1
pid:918 duration:0 => ret_hdl:27846
05-19 [Link].021 479 1594 I libPowerHal: [PE] scn:2 hdl:27846
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].022 918 8448 I mtkpower_client: ret_hdl:27846
05-19 [Link].247 918 1721 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].248 918 1721 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].249 918 8448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8448
05-19 [Link].252 918 1721 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].252 918 1721 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].253 918 9097 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].254 918 9097 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].256 918 9097 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].257 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27849 hint:-1
pid:918 duration:0 => ret_hdl:27849
05-19 [Link].257 479 1594 I libPowerHal: [PE] scn:4 hdl:27849
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].259 918 8448 I mtkpower_client: ret_hdl:27849
05-19 [Link].259 918 8448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8448
05-19 [Link].261 918 8448 I mtkpower_client: ret_hdl:27850
05-19 [Link].262 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27850 hint:-1
pid:918 duration:0 => ret_hdl:27850
05-19 [Link].262 479 1594 I libPowerHal: [PE] scn:6 hdl:27850
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].317 918 8489 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].318 918 8489 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].318 918 8489 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].318 918 8489 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].318 918 8489 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].318 918 8489 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdcbee000
05-19 [Link].318 918 8489 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].330 918 8493 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8493
05-19 [Link].331 918 8493 I mtkpower_client: ret_hdl:27851
05-19 [Link].332 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27851 hint:-1
pid:918 duration:0 => ret_hdl:27851
05-19 [Link].332 479 1594 I libPowerHal: [PE] scn:7 hdl:27851
lock_user:[email protected] pid:918 tid:8493 dur:0
05-19 [Link].345 918 8489 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].345 918 8489 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].345 918 8489 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].345 918 8489 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].345 918 8489 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].390 918 8448 I mtkpower_client: perf_lock_rel, hdl:27850,
tid:8448
05-19 [Link].391 479 1594 I libPowerHal: [PD] scn:6 hdl:27850
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].648 918 8448 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8448
05-19 [Link].648 918 8448 I mtkpower_client: ret_hdl:27854
05-19 [Link].649 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27854 hint:-1
pid:918 duration:0 => ret_hdl:27854
05-19 [Link].649 479 1594 I libPowerHal: [PE] scn:3 hdl:27854
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].696 918 8492 I mtkpower_client: perf_lock_rel, hdl:27851,
tid:8492
05-19 [Link].696 918 8492 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8492
05-19 [Link].697 479 1594 I libPowerHal: [PD] scn:7 hdl:27851
lock_user:[email protected] pid:918 tid:8493 dur:0
05-19 [Link].698 918 8492 I mtkpower_client: ret_hdl:27855
05-19 [Link].699 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27855 hint:-1
pid:918 duration:0 => ret_hdl:27855
05-19 [Link].699 479 1594 I libPowerHal: [PE] scn:5 hdl:27855
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].745 918 8444 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].764 918 8444 I mtkpower_client: perf_lock_rel, hdl:27854,
tid:8444
05-19 [Link].764 918 8444 I mtkpower_client: perf_lock_rel, hdl:27849,
tid:8444
05-19 [Link].764 918 8444 I mtkpower_client: perf_lock_rel, hdl:27846,
tid:8444
05-19 [Link].764 918 8444 I mtkpower_client: perf_lock_rel, hdl:27844,
tid:8444
05-19 [Link].764 918 8444 I mtkpower_client: perf_lock_rel, hdl:27843,
tid:8444
05-19 [Link].764 918 8444 I mtkpower_client: perf_lock_rel, hdl:27842,
tid:8444
05-19 [Link].764 479 1594 I libPowerHal: [PD] scn:3 hdl:27854
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].765 479 1594 I libPowerHal: [PD] scn:4 hdl:27849
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].769 479 1594 I libPowerHal: [PD] scn:2 hdl:27846
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].770 479 1594 I libPowerHal: [PD] scn:1 hdl:27844
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].771 479 1594 I libPowerHal: [PD] scn:0 hdl:27843
lock_user:[email protected] pid:918 tid:8448 dur:0
05-19 [Link].902 918 8492 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8492
05-19 [Link].904 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27856 hint:-1
pid:918 duration:0 => ret_hdl:27856
05-19 [Link].904 479 1594 I libPowerHal: [PE] scn:0 hdl:27856
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].905 918 8492 I mtkpower_client: ret_hdl:27856
05-19 [Link].905 918 8492 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8492
05-19 [Link].909 918 8492 I mtkpower_client: ret_hdl:27857
05-19 [Link].909 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27857 hint:-1
pid:918 duration:0 => ret_hdl:27857
05-19 [Link].909 479 1594 I libPowerHal: [PE] scn:1 hdl:27857
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].144 918 8492 I mtkpower_client: perf_lock_rel, hdl:27857,
tid:8492
05-19 [Link].145 479 1594 I libPowerHal: [PD] scn:1 hdl:27857
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].285 918 8492 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8492
05-19 [Link].287 918 8492 I mtkpower_client: ret_hdl:27861
05-19 [Link].287 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27861 hint:-1
pid:918 duration:0 => ret_hdl:27861
05-19 [Link].287 479 1594 I libPowerHal: [PE] scn:4 hdl:27861
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].404 918 8492 I mtkpower_client: perf_lock_rel, hdl:27861,
tid:8492
05-19 [Link].406 479 1594 I libPowerHal: [PD] scn:4 hdl:27861
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].572 918 8492 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8492
05-19 [Link].575 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27864 hint:-1
pid:918 duration:0 => ret_hdl:27864
05-19 [Link].575 479 1594 I libPowerHal: [PE] scn:3 hdl:27864
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].576 918 8492 I mtkpower_client: ret_hdl:27864
05-19 [Link].651 918 1721 E OMXNodeInstance:
setParameter(0xe9930804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].652 918 1721 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].655 918 1065 E MtkOmxVdecEx: [0xe9930800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].655 918 1065 E OMXNodeInstance:
setConfig(0xe9930804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].656 918 1065 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].656 918 1065 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].657 918 1065 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].797 918 8538 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].797 918 8538 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].797 918 8538 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].800 918 8538 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].800 918 8538 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 24604
05-19 [Link].800 918 8538 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2af4000
05-19 [Link].801 918 8538 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].811 918 8543 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8543
05-19 [Link].812 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27865 hint:-1
pid:918 duration:0 => ret_hdl:27865
05-19 [Link].813 479 1594 I libPowerHal: [PE] scn:2 hdl:27865
lock_user:[email protected] pid:918 tid:8543 dur:0
05-19 [Link].813 918 8543 I mtkpower_client: ret_hdl:27865
05-19 [Link].815 918 8538 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].815 918 8538 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].815 918 8538 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].815 918 8538 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].815 918 8538 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].839 918 8488 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].857 918 8488 I mtkpower_client: perf_lock_rel, hdl:27864,
tid:8488
05-19 [Link].858 918 8488 I mtkpower_client: perf_lock_rel, hdl:27856,
tid:8488
05-19 [Link].858 918 8488 I mtkpower_client: perf_lock_rel, hdl:27855,
tid:8488
05-19 [Link].858 918 8488 I mtkpower_client: perf_lock_rel, hdl:27851,
tid:8488
05-19 [Link].858 479 1594 I libPowerHal: [PD] scn:3 hdl:27864
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].863 479 1594 I libPowerHal: [PD] scn:0 hdl:27856
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].865 479 1594 I libPowerHal: [PD] scn:5 hdl:27855
lock_user:[email protected] pid:918 tid:8492 dur:0
05-19 [Link].198 918 8542 I mtkpower_client: perf_lock_rel, hdl:27865,
tid:8542
05-19 [Link].198 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].198 479 1594 I libPowerHal: [PD] scn:2 hdl:27865
lock_user:[email protected] pid:918 tid:8543 dur:0
05-19 [Link].199 918 8542 I mtkpower_client: ret_hdl:27869
05-19 [Link].200 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].200 918 8542 I mtkpower_client: ret_hdl:27870
05-19 [Link].200 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].201 918 8542 I mtkpower_client: ret_hdl:27871
05-19 [Link].202 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27869 hint:-1
pid:918 duration:0 => ret_hdl:27869
05-19 [Link].202 479 1594 I libPowerHal: [PE] scn:2 hdl:27869
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].203 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27870 hint:-1
pid:918 duration:0 => ret_hdl:27870
05-19 [Link].203 479 1594 I libPowerHal: [PE] scn:4 hdl:27870
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].205 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27871 hint:-1
pid:918 duration:0 => ret_hdl:27871
05-19 [Link].205 479 1594 I libPowerHal: [PE] scn:5 hdl:27871
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].275 918 11990 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].275 918 5724 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].278 918 5724 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].278 918 5724 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].279 918 1780 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].279 918 1780 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].279 918 1959 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].318 918 8604 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].318 918 8604 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].318 918 8604 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].319 918 8604 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].319 918 8604 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].319 918 8604 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdd675000
05-19 [Link].319 918 8604 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].323 918 8608 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8608
05-19 [Link].324 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27874 hint:-1
pid:918 duration:0 => ret_hdl:27874
05-19 [Link].324 479 1594 I libPowerHal: [PE] scn:1 hdl:27874
lock_user:[email protected] pid:918 tid:8608 dur:0
05-19 [Link].324 918 8608 I mtkpower_client: ret_hdl:27874
05-19 [Link].334 918 8604 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].334 918 8604 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].334 918 8604 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].334 918 8604 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].335 918 8604 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].464 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].465 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27875 hint:-1
pid:918 duration:0 => ret_hdl:27875
05-19 [Link].465 479 1594 I libPowerHal: [PE] scn:3 hdl:27875
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].466 918 8542 I mtkpower_client: ret_hdl:27875
05-19 [Link].467 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].468 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27876 hint:-1
pid:918 duration:0 => ret_hdl:27876
05-19 [Link].468 479 1594 I libPowerHal: [PE] scn:6 hdl:27876
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].469 918 8542 I mtkpower_client: ret_hdl:27876
05-19 [Link].469 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].471 918 8542 I mtkpower_client: ret_hdl:27877
05-19 [Link].471 918 8542 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8542
05-19 [Link].472 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27877 hint:-1
pid:918 duration:0 => ret_hdl:27877
05-19 [Link].472 479 1594 I libPowerHal: [PE] scn:7 hdl:27877
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].473 918 8542 I mtkpower_client: ret_hdl:27878
05-19 [Link].473 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:27878 hint:-1
pid:918 duration:0 => ret_hdl:27878
05-19 [Link].473 479 1594 I libPowerHal: [PE] scn:8 hdl:27878
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].613 918 8537 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].635 918 8537 I mtkpower_client: perf_lock_rel, hdl:27878,
tid:8537
05-19 [Link].636 918 8537 I mtkpower_client: perf_lock_rel, hdl:27877,
tid:8537
05-19 [Link].636 918 8537 I mtkpower_client: perf_lock_rel, hdl:27876,
tid:8537
05-19 [Link].637 479 1594 I libPowerHal: [PD] scn:8 hdl:27878
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].637 918 8537 I mtkpower_client: perf_lock_rel, hdl:27875,
tid:8537
05-19 [Link].637 918 8537 I mtkpower_client: perf_lock_rel, hdl:27871,
tid:8537
05-19 [Link].637 918 8537 I mtkpower_client: perf_lock_rel, hdl:27870,
tid:8537
05-19 [Link].637 918 8537 I mtkpower_client: perf_lock_rel, hdl:27869,
tid:8537
05-19 [Link].637 918 8537 I mtkpower_client: perf_lock_rel, hdl:27865,
tid:8537
05-19 [Link].639 479 1594 I libPowerHal: [PD] scn:7 hdl:27877
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].644 479 1594 I libPowerHal: [PD] scn:6 hdl:27876
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].646 479 1594 I libPowerHal: [PD] scn:3 hdl:27875
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].647 479 1594 I libPowerHal: [PD] scn:5 hdl:27871
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].649 479 1594 I libPowerHal: [PD] scn:4 hdl:27870
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].650 479 1594 I libPowerHal: [PD] scn:2 hdl:27869
lock_user:[email protected] pid:918 tid:8542 dur:0
05-19 [Link].742 918 8607 I mtkpower_client: perf_lock_rel, hdl:27874,
tid:8607
05-19 [Link].743 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].744 479 1594 I libPowerHal: [PD] scn:1 hdl:27874
lock_user:[email protected] pid:918 tid:8608 dur:0
05-19 [Link].745 918 8607 I mtkpower_client: ret_hdl:27879
05-19 [Link].745 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].745 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27879 hint:-1
pid:918 duration:0 => ret_hdl:27879
05-19 [Link].745 479 1594 I libPowerHal: [PE] scn:1 hdl:27879
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].746 918 8607 I mtkpower_client: ret_hdl:27880
05-19 [Link].746 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].746 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27880 hint:-1
pid:918 duration:0 => ret_hdl:27880
05-19 [Link].746 479 1594 I libPowerHal: [PE] scn:2 hdl:27880
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].747 918 8607 I mtkpower_client: ret_hdl:27881
05-19 [Link].747 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27881 hint:-1
pid:918 duration:0 => ret_hdl:27881
05-19 [Link].747 479 1594 I libPowerHal: [PE] scn:3 hdl:27881
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].098 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].099 918 8607 I mtkpower_client: ret_hdl:27887
05-19 [Link].099 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].099 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27887 hint:-1
pid:918 duration:0 => ret_hdl:27887
05-19 [Link].100 479 1594 I libPowerHal: [PE] scn:0 hdl:27887
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].101 918 8607 I mtkpower_client: ret_hdl:27888
05-19 [Link].101 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].106 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27888 hint:-1
pid:918 duration:0 => ret_hdl:27888
05-19 [Link].107 479 1594 I libPowerHal: [PE] scn:5 hdl:27888
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].108 918 8607 I mtkpower_client: ret_hdl:27889
05-19 [Link].108 918 8607 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8607
05-19 [Link].109 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27889 hint:-1
pid:918 duration:0 => ret_hdl:27889
05-19 [Link].109 479 1594 I libPowerHal: [PE] scn:6 hdl:27889
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].110 918 8607 I mtkpower_client: ret_hdl:27890
05-19 [Link].110 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27890 hint:-1
pid:918 duration:0 => ret_hdl:27890
05-19 [Link].110 479 1594 I libPowerHal: [PE] scn:7 hdl:27890
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].124 918 1780 E OMXNodeInstance:
setParameter(0xea0d1804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].124 918 1780 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].128 918 1820 E MtkOmxVdecEx: [0xea0d1800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].128 918 1820 E OMXNodeInstance:
setConfig(0xea0d1804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].128 918 1820 E OMXNodeInstance:
getParameter(0xea0d1804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].129 918 1820 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].129 918 1820 E OMXNodeInstance:
getConfig(0xea0d1804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].176 918 8653 E VDO_LOG : GetDecoderAPI hWrapper 0xea2ae810
05-19 [Link].176 918 8653 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].176 918 8653 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].177 918 8653 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].177 918 8653 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18821
05-19 [Link].177 918 8653 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].177 918 8653 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].185 918 8658 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8658
05-19 [Link].187 918 8658 I mtkpower_client: ret_hdl:27891
05-19 [Link].188 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:27891 hint:-1
pid:918 duration:0 => ret_hdl:27891
05-19 [Link].188 479 1594 I libPowerHal: [PE] scn:8 hdl:27891
lock_user:[email protected] pid:918 tid:8658 dur:0
05-19 [Link].203 918 8653 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].203 918 8653 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].203 918 8653 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].203 918 8653 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].203 918 8653 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].210 918 8603 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].237 918 8603 I mtkpower_client: perf_lock_rel, hdl:27890,
tid:8603
05-19 [Link].238 479 1594 I libPowerHal: [PD] scn:7 hdl:27890
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27889,
tid:8603
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27888,
tid:8603
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27887,
tid:8603
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27881,
tid:8603
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27880,
tid:8603
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27879,
tid:8603
05-19 [Link].242 918 8603 I mtkpower_client: perf_lock_rel, hdl:27874,
tid:8603
05-19 [Link].247 479 1594 I libPowerHal: [PD] scn:6 hdl:27889
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].250 479 1594 I libPowerHal: [PD] scn:5 hdl:27888
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].252 479 1594 I libPowerHal: [PD] scn:0 hdl:27887
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].255 479 1594 I libPowerHal: [PD] scn:3 hdl:27881
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].258 479 1594 I libPowerHal: [PD] scn:2 hdl:27880
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].261 479 1594 I libPowerHal: [PD] scn:1 hdl:27879
lock_user:[email protected] pid:918 tid:8607 dur:0
05-19 [Link].537 918 8657 I mtkpower_client: perf_lock_rel, hdl:27891,
tid:8657
05-19 [Link].539 918 8657 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8657
05-19 [Link].540 479 1594 I libPowerHal: [PD] scn:8 hdl:27891
lock_user:[email protected] pid:918 tid:8658 dur:0
05-19 [Link].542 918 8657 I mtkpower_client: ret_hdl:27897
05-19 [Link].542 918 8657 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8657
05-19 [Link].542 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27897 hint:-1
pid:918 duration:0 => ret_hdl:27897
05-19 [Link].542 479 1594 I libPowerHal: [PE] scn:1 hdl:27897
lock_user:[email protected] pid:918 tid:8657 dur:0
05-19 [Link].546 918 8657 I mtkpower_client: ret_hdl:27898
05-19 [Link].546 918 8657 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8657
05-19 [Link].546 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27898 hint:-1
pid:918 duration:0 => ret_hdl:27898
05-19 [Link].546 479 1594 I libPowerHal: [PE] scn:2 hdl:27898
lock_user:[email protected] pid:918 tid:8657 dur:0
05-19 [Link].547 918 8657 I mtkpower_client: ret_hdl:27899
05-19 [Link].547 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27899 hint:-1
pid:918 duration:0 => ret_hdl:27899
05-19 [Link].547 479 1594 I libPowerHal: [PE] scn:4 hdl:27899
lock_user:[email protected] pid:918 tid:8657 dur:0
05-19 [Link].554 918 11990 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].554 918 1820 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].558 918 6021 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].558 918 6021 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].559 918 1088 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].559 918 1960 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].560 918 1780 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].608 918 8696 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].608 918 8696 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].608 918 8696 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].609 918 8696 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].609 918 8696 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].609 918 8696 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xdd6b6000
05-19 [Link].609 918 8696 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].624 918 8702 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8702
05-19 [Link].625 918 8702 I mtkpower_client: ret_hdl:27900
05-19 [Link].625 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27900 hint:-1
pid:918 duration:0 => ret_hdl:27900
05-19 [Link].625 479 1594 I libPowerHal: [PE] scn:3 hdl:27900
lock_user:[email protected] pid:918 tid:8702 dur:0
05-19 [Link].643 918 8696 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].644 918 8696 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].644 918 8696 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].644 918 8696 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].644 918 8696 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].707 918 8652 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].721 918 8652 I mtkpower_client: perf_lock_rel, hdl:27899,
tid:8652
05-19 [Link].721 918 8652 I mtkpower_client: perf_lock_rel, hdl:27898,
tid:8652
05-19 [Link].721 918 8652 I mtkpower_client: perf_lock_rel, hdl:27897,
tid:8652
05-19 [Link].722 918 8652 I mtkpower_client: perf_lock_rel, hdl:27891,
tid:8652
05-19 [Link].722 479 1594 I libPowerHal: [PD] scn:4 hdl:27899
lock_user:[email protected] pid:918 tid:8657 dur:0
05-19 [Link].724 479 1594 I libPowerHal: [PD] scn:2 hdl:27898
lock_user:[email protected] pid:918 tid:8657 dur:0
05-19 [Link].725 479 1594 I libPowerHal: [PD] scn:1 hdl:27897
lock_user:[email protected] pid:918 tid:8657 dur:0
05-19 [Link].943 918 8701 I mtkpower_client: perf_lock_rel, hdl:27900,
tid:8701
05-19 [Link].943 918 8701 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8701
05-19 [Link].944 918 8701 I mtkpower_client: ret_hdl:27901
05-19 [Link].944 918 8701 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8701
05-19 [Link].944 918 8701 I mtkpower_client: ret_hdl:27902
05-19 [Link].944 918 8701 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8701
05-19 [Link].944 918 8701 I mtkpower_client: ret_hdl:27903
05-19 [Link].945 479 1594 I libPowerHal: [PD] scn:3 hdl:27900
lock_user:[email protected] pid:918 tid:8702 dur:0
05-19 [Link].946 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27901 hint:-1
pid:918 duration:0 => ret_hdl:27901
05-19 [Link].946 479 1594 I libPowerHal: [PE] scn:1 hdl:27901
lock_user:[email protected] pid:918 tid:8701 dur:0
05-19 [Link].947 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27902 hint:-1
pid:918 duration:0 => ret_hdl:27902
05-19 [Link].947 479 1594 I libPowerHal: [PE] scn:2 hdl:27902
lock_user:[email protected] pid:918 tid:8701 dur:0
05-19 [Link].948 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27903 hint:-1
pid:918 duration:0 => ret_hdl:27903
05-19 [Link].948 479 1594 I libPowerHal: [PE] scn:4 hdl:27903
lock_user:[email protected] pid:918 tid:8701 dur:0
05-19 [Link].001 918 8701 I mtkpower_client: perf_lock_rel, hdl:27903,
tid:8701
05-19 [Link].003 479 1594 I libPowerHal: [PD] scn:4 hdl:27903
lock_user:[email protected] pid:918 tid:8701 dur:0
05-19 [Link].116 918 8701 I mtkpower_client: perf_lock_rel, hdl:27902,
tid:8701
05-19 [Link].117 479 1594 I libPowerHal: [PD] scn:2 hdl:27902
lock_user:[email protected] pid:918 tid:8701 dur:0
05-19 [Link].163 918 1088 E OMXNodeInstance:
setParameter(0xea2e8004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].164 918 1088 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].167 918 1721 E MtkOmxVdecEx: [0xea2e8000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].168 918 1721 E OMXNodeInstance:
setConfig(0xea2e8004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].168 918 1065 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].168 918 1065 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].171 918 1820 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].213 918 8741 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].214 918 8741 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].214 918 8741 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].215 918 8741 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].215 918 8741 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18821
05-19 [Link].215 918 8741 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2e5f000
05-19 [Link].215 918 8741 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].218 918 8747 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8747
05-19 [Link].221 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27909 hint:-1
pid:918 duration:0 => ret_hdl:27909
05-19 [Link].221 479 1594 I libPowerHal: [PE] scn:0 hdl:27909
lock_user:[email protected] pid:918 tid:8747 dur:0
05-19 [Link].222 918 8747 I mtkpower_client: ret_hdl:27909
05-19 [Link].244 918 8741 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].244 918 8741 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].244 918 8741 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].244 918 8741 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].244 918 8741 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].418 918 8695 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].429 918 8695 I mtkpower_client: perf_lock_rel, hdl:27903,
tid:8695
05-19 [Link].429 918 8695 I mtkpower_client: perf_lock_rel, hdl:27902,
tid:8695
05-19 [Link].429 918 8695 I mtkpower_client: perf_lock_rel, hdl:27901,
tid:8695
05-19 [Link].429 918 8695 I mtkpower_client: perf_lock_rel, hdl:27900,
tid:8695
05-19 [Link].431 479 1594 I libPowerHal: [PD] scn:1 hdl:27901
lock_user:[email protected] pid:918 tid:8701 dur:0
05-19 [Link].619 918 8746 I mtkpower_client: perf_lock_rel, hdl:27909,
tid:8746
05-19 [Link].619 918 8746 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8746
05-19 [Link].620 479 1594 I libPowerHal: [PD] scn:0 hdl:27909
lock_user:[email protected] pid:918 tid:8747 dur:0
05-19 [Link].621 918 8746 I mtkpower_client: ret_hdl:27913
05-19 [Link].621 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27913 hint:-1
pid:918 duration:0 => ret_hdl:27913
05-19 [Link].621 479 1594 I libPowerHal: [PE] scn:4 hdl:27913
lock_user:[email protected] pid:918 tid:8746 dur:0
05-19 [Link].683 918 1820 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].683 918 1820 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].687 918 1820 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].687 918 1820 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].688 918 1820 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].688 918 1820 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].688 918 1820 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].723 918 8790 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].724 918 8790 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].724 918 8790 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].724 918 8790 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].724 918 8790 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].724 918 8790 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe03cc000
05-19 [Link].724 918 8790 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].727 918 8797 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8797
05-19 [Link].729 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27916 hint:-1
pid:918 duration:0 => ret_hdl:27916
05-19 [Link].729 479 1594 I libPowerHal: [PE] scn:2 hdl:27916
lock_user:[email protected] pid:918 tid:8797 dur:0
05-19 [Link].730 918 8797 I mtkpower_client: ret_hdl:27916
05-19 [Link].737 918 8790 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].737 918 8790 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].737 918 8790 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].737 918 8790 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].737 918 8790 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].921 918 8740 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].939 918 8740 I mtkpower_client: perf_lock_rel, hdl:27913,
tid:8740
05-19 [Link].940 918 8740 I mtkpower_client: perf_lock_rel, hdl:27909,
tid:8740
05-19 [Link].941 479 1594 I libPowerHal: [PD] scn:4 hdl:27913
lock_user:[email protected] pid:918 tid:8746 dur:0
05-19 [Link].083 918 8796 I mtkpower_client: perf_lock_rel, hdl:27916,
tid:8796
05-19 [Link].084 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].085 479 1594 I libPowerHal: [PD] scn:2 hdl:27916
lock_user:[email protected] pid:918 tid:8797 dur:0
05-19 [Link].090 918 8796 I mtkpower_client: ret_hdl:27917
05-19 [Link].090 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].090 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27917 hint:-1
pid:918 duration:0 => ret_hdl:27917
05-19 [Link].090 479 1594 I libPowerHal: [PE] scn:1 hdl:27917
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].091 918 8796 I mtkpower_client: ret_hdl:27918
05-19 [Link].091 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].091 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27918 hint:-1
pid:918 duration:0 => ret_hdl:27918
05-19 [Link].091 479 1594 I libPowerHal: [PE] scn:2 hdl:27918
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].092 918 8796 I mtkpower_client: ret_hdl:27919
05-19 [Link].092 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27919 hint:-1
pid:918 duration:0 => ret_hdl:27919
05-19 [Link].092 479 1594 I libPowerHal: [PE] scn:3 hdl:27919
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].265 918 8796 I mtkpower_client: perf_lock_rel, hdl:27919,
tid:8796
05-19 [Link].265 479 1594 I libPowerHal: [PD] scn:3 hdl:27919
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].351 918 8796 I mtkpower_client: perf_lock_rel, hdl:27918,
tid:8796
05-19 [Link].353 479 1594 I libPowerHal: [perfLockRel] hdl:27918, idx:2
05-19 [Link].353 479 1594 I libPowerHal: [PD] scn:2 hdl:27918
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].788 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].795 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27920 hint:-1
pid:918 duration:0 => ret_hdl:27920
05-19 [Link].795 918 8796 I mtkpower_client: ret_hdl:27920
05-19 [Link].795 479 1594 I libPowerHal: [PE] scn:0 hdl:27920
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].991 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].993 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27921 hint:-1
pid:918 duration:0 => ret_hdl:27921
05-19 [Link].993 479 1594 I libPowerHal: [PE] scn:2 hdl:27921
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].994 918 8796 I mtkpower_client: ret_hdl:27921
05-19 [Link].197 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].199 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27922 hint:-1
pid:918 duration:0 => ret_hdl:27922
05-19 [Link].199 479 1594 I libPowerHal: [PE] scn:3 hdl:27922
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].200 918 8796 I mtkpower_client: ret_hdl:27922
05-19 [Link].201 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].203 918 8796 I mtkpower_client: ret_hdl:27923
05-19 [Link].204 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27923 hint:-1
pid:918 duration:0 => ret_hdl:27923
05-19 [Link].204 479 1594 I libPowerHal: [PE] scn:4 hdl:27923
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].415 918 8796 I mtkpower_client: perf_lock_rel, hdl:27923,
tid:8796
05-19 [Link].416 479 1594 I libPowerHal: [PD] scn:4 hdl:27923
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].633 8849 8849 E SQLiteDatabase: at
[Link]([Link])
05-19 [Link].716 918 8796 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8796
05-19 [Link].716 918 8796 I mtkpower_client: ret_hdl:27924
05-19 [Link].717 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27924 hint:-1
pid:918 duration:0 => ret_hdl:27924
05-19 [Link].717 479 1594 I libPowerHal: [PE] scn:4 hdl:27924
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].096 8849 8918 E ActivityThread: Failed to find provider info for
[Link]
05-19 [Link].958 918 1085 E OMXNodeInstance:
setParameter(0xea2e8004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].959 918 1780 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].962 918 5058 E MtkOmxVdecEx: [0xea2e8000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].962 918 5058 E OMXNodeInstance:
setConfig(0xea2e8004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].962 918 1085 E OMXNodeInstance:
getParameter(0xea2e8004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].962 918 5058 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].963 918 1085 E OMXNodeInstance:
getConfig(0xea2e8004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].031 918 8976 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].032 918 8976 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].032 918 8976 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].034 918 8976 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].034 918 8976 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18821
05-19 [Link].034 918 8976 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1d5c000
05-19 [Link].034 918 8976 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].041 918 8982 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8982
05-19 [Link].043 918 8982 I mtkpower_client: ret_hdl:27930
05-19 [Link].044 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27930 hint:-1
pid:918 duration:0 => ret_hdl:27930
05-19 [Link].044 479 1594 I libPowerHal: [PE] scn:6 hdl:27930
lock_user:[email protected] pid:918 tid:8982 dur:0
05-19 [Link].061 918 8976 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].061 918 8976 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].061 918 8976 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].061 918 8976 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].061 918 8976 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].217 918 8788 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].234 918 8788 I mtkpower_client: perf_lock_rel, hdl:27924,
tid:8788
05-19 [Link].235 918 8788 I mtkpower_client: perf_lock_rel, hdl:27922,
tid:8788
05-19 [Link].235 918 8788 I mtkpower_client: perf_lock_rel, hdl:27921,
tid:8788
05-19 [Link].236 918 8788 I mtkpower_client: perf_lock_rel, hdl:27920,
tid:8788
05-19 [Link].236 918 8788 I mtkpower_client: perf_lock_rel, hdl:27917,
tid:8788
05-19 [Link].236 918 8788 I mtkpower_client: perf_lock_rel, hdl:27916,
tid:8788
05-19 [Link].239 479 1594 I libPowerHal: [PD] scn:4 hdl:27924
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].242 479 1594 I libPowerHal: [PD] scn:3 hdl:27922
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].245 479 1594 I libPowerHal: [PD] scn:2 hdl:27921
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].254 479 1594 I libPowerHal: [PD] scn:0 hdl:27920
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].256 479 1594 I libPowerHal: [PD] scn:1 hdl:27917
lock_user:[email protected] pid:918 tid:8796 dur:0
05-19 [Link].482 918 8981 I mtkpower_client: perf_lock_rel, hdl:27930,
tid:8981
05-19 [Link].482 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].484 479 1594 I libPowerHal: [PD] scn:6 hdl:27930
lock_user:[email protected] pid:918 tid:8982 dur:0
05-19 [Link].490 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27931 hint:-1
pid:918 duration:0 => ret_hdl:27931
05-19 [Link].490 479 1594 I libPowerHal: [PE] scn:0 hdl:27931
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].490 918 8981 I mtkpower_client: ret_hdl:27931
05-19 [Link].490 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].491 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27932 hint:-1
pid:918 duration:0 => ret_hdl:27932
05-19 [Link].491 479 1594 I libPowerHal: [PE] scn:1 hdl:27932
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].492 918 8981 I mtkpower_client: ret_hdl:27932
05-19 [Link].492 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].493 918 8981 I mtkpower_client: ret_hdl:27933
05-19 [Link].493 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27933 hint:-1
pid:918 duration:0 => ret_hdl:27933
05-19 [Link].493 479 1594 I libPowerHal: [PE] scn:2 hdl:27933
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].664 918 8981 I mtkpower_client: perf_lock_rel, hdl:27933,
tid:8981
05-19 [Link].664 479 1594 I libPowerHal: [PD] scn:2 hdl:27933
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].056 918 8981 I mtkpower_client: perf_lock_rel, hdl:27932,
tid:8981
05-19 [Link].057 479 1594 I libPowerHal: [PD] scn:1 hdl:27932
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].556 918 1085 E OMXNodeInstance:
setParameter(0xea2af004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].557 918 1085 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].568 918 1721 E MtkOmxVdecEx: [0xea2af000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].568 918 1721 E OMXNodeInstance:
setConfig(0xea2af004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].568 918 1820 E OMXNodeInstance:
getParameter(0xea2af004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].569 918 1065 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].573 918 1085 E OMXNodeInstance:
getConfig(0xea2af004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].706 918 9027 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].706 918 9027 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].706 918 9027 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].706 918 9027 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].707 918 9027 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].707 918 9027 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2bf5000
05-19 [Link].707 918 9027 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].730 918 9036 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9036
05-19 [Link].731 918 9036 I mtkpower_client: ret_hdl:27937
05-19 [Link].733 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27937 hint:-1
pid:918 duration:0 => ret_hdl:27937
05-19 [Link].733 479 1594 I libPowerHal: [PE] scn:2 hdl:27937
lock_user:[email protected] pid:918 tid:9036 dur:0
05-19 [Link].739 918 9027 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].739 918 9027 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].739 918 9027 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].760 918 9027 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].760 918 9027 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].890 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].891 918 8981 I mtkpower_client: ret_hdl:27939
05-19 [Link].891 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].893 918 8981 I mtkpower_client: ret_hdl:27940
05-19 [Link].893 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].894 918 8981 I mtkpower_client: ret_hdl:27941
05-19 [Link].894 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].895 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27939 hint:-1
pid:918 duration:0 => ret_hdl:27939
05-19 [Link].895 479 1594 I libPowerHal: [PE] scn:3 hdl:27939
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].898 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27940 hint:-1
pid:918 duration:0 => ret_hdl:27940
05-19 [Link].898 479 1594 I libPowerHal: [PE] scn:4 hdl:27940
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].900 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27941 hint:-1
pid:918 duration:0 => ret_hdl:27941
05-19 [Link].900 479 1594 I libPowerHal: [PE] scn:5 hdl:27941
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].901 918 8981 I mtkpower_client: ret_hdl:27942
05-19 [Link].901 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].901 918 8981 I mtkpower_client: ret_hdl:27943
05-19 [Link].905 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:27942 hint:-1
pid:918 duration:0 => ret_hdl:27942
05-19 [Link].905 479 1594 I libPowerHal: [PE] scn:6 hdl:27942
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].907 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27943 hint:-1
pid:918 duration:0 => ret_hdl:27943
05-19 [Link].907 479 1594 I libPowerHal: [PE] scn:1 hdl:27943
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].019 918 9026 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].038 918 9026 I mtkpower_client: perf_lock_rel, hdl:27937,
tid:9026
05-19 [Link].039 479 1594 I libPowerHal: [PD] scn:2 hdl:27937
lock_user:[email protected] pid:918 tid:9036 dur:0
05-19 [Link].180 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].181 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27944 hint:-1
pid:918 duration:0 => ret_hdl:27944
05-19 [Link].181 479 1594 I libPowerHal: [PE] scn:2 hdl:27944
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].182 918 8981 I mtkpower_client: ret_hdl:27944
05-19 [Link].182 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].182 918 8981 I mtkpower_client: ret_hdl:27945
05-19 [Link].183 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27945 hint:-1
pid:918 duration:0 => ret_hdl:27945
05-19 [Link].183 479 1594 I libPowerHal: [PE] scn:7 hdl:27945
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].052 918 8981 I mtkpower_client: perf_lock_rel, hdl:27945,
tid:8981
05-19 [Link].052 918 8981 I mtkpower_client: perf_lock_rel, hdl:27944,
tid:8981
05-19 [Link].053 479 1594 I libPowerHal: [PD] scn:7 hdl:27945
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].055 479 1594 I libPowerHal: [PD] scn:2 hdl:27944
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].169 918 8981 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:8981
05-19 [Link].170 918 8981 I mtkpower_client: ret_hdl:27946
05-19 [Link].170 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27946 hint:-1
pid:918 duration:0 => ret_hdl:27946
05-19 [Link].170 479 1594 I libPowerHal: [PE] scn:2 hdl:27946
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].261 918 8981 I mtkpower_client: perf_lock_rel, hdl:27946,
tid:8981
05-19 [Link].261 918 8981 I mtkpower_client: perf_lock_rel, hdl:27943,
tid:8981
05-19 [Link].263 479 1594 I libPowerHal: [PD] scn:2 hdl:27946
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].265 479 1594 I libPowerHal: [PD] scn:1 hdl:27943
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].367 918 8981 I mtkpower_client: perf_lock_rel, hdl:27942,
tid:8981
05-19 [Link].368 479 1594 I libPowerHal: [PD] scn:6 hdl:27942
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].457 918 11717 E OMXNodeInstance:
setParameter(0xe9e3e004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].457 918 11717 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].463 918 11717 E MtkOmxVdecEx: [0xe9e3e000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].463 918 11717 E OMXNodeInstance:
setConfig(0xe9e3e004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].464 918 11717 E OMXNodeInstance:
getParameter(0xe9e3e004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].465 918 11717 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].466 918 11717 E OMXNodeInstance:
getConfig(0xe9e3e004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].612 918 9077 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].612 918 9077 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].612 918 9077 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].613 918 9077 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].613 918 9077 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].613 918 9077 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe22f4000
05-19 [Link].613 918 9077 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].616 918 9083 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9083
05-19 [Link].618 918 9083 I mtkpower_client: ret_hdl:27952
05-19 [Link].618 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27952 hint:-1
pid:918 duration:0 => ret_hdl:27952
05-19 [Link].618 479 1594 I libPowerHal: [PE] scn:1 hdl:27952
lock_user:[email protected] pid:918 tid:9083 dur:0
05-19 [Link].649 918 9077 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].649 918 9077 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].649 918 9077 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].649 918 9077 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].649 918 9077 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].650 918 8975 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].674 918 8975 I mtkpower_client: perf_lock_rel, hdl:27945,
tid:8975
05-19 [Link].674 918 8975 I mtkpower_client: perf_lock_rel, hdl:27946,
tid:8975
05-19 [Link].674 918 8975 I mtkpower_client: perf_lock_rel, hdl:27943,
tid:8975
05-19 [Link].675 918 8975 I mtkpower_client: perf_lock_rel, hdl:27942,
tid:8975
05-19 [Link].675 918 8975 I mtkpower_client: perf_lock_rel, hdl:27941,
tid:8975
05-19 [Link].675 918 8975 I mtkpower_client: perf_lock_rel, hdl:27940,
tid:8975
05-19 [Link].675 918 8975 I mtkpower_client: perf_lock_rel, hdl:27939,
tid:8975
05-19 [Link].675 918 8975 I mtkpower_client: perf_lock_rel, hdl:27931,
tid:8975
05-19 [Link].675 918 8975 I mtkpower_client: perf_lock_rel, hdl:27930,
tid:8975
05-19 [Link].681 479 1594 I libPowerHal: [PD] scn:5 hdl:27941
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].689 479 1594 I libPowerHal: [PD] scn:4 hdl:27940
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].690 479 1594 I libPowerHal: [PD] scn:3 hdl:27939
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].693 479 1594 I libPowerHal: [PD] scn:0 hdl:27931
lock_user:[email protected] pid:918 tid:8981 dur:0
05-19 [Link].012 918 9082 I mtkpower_client: perf_lock_rel, hdl:27952,
tid:9082
05-19 [Link].013 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].014 479 1594 I libPowerHal: [PD] scn:1 hdl:27952
lock_user:[email protected] pid:918 tid:9083 dur:0
05-19 [Link].015 918 9082 I mtkpower_client: ret_hdl:27953
05-19 [Link].015 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].015 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27953 hint:-1
pid:918 duration:0 => ret_hdl:27953
05-19 [Link].015 479 1594 I libPowerHal: [PE] scn:0 hdl:27953
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].016 918 9082 I mtkpower_client: ret_hdl:27954
05-19 [Link].016 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].016 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27954 hint:-1
pid:918 duration:0 => ret_hdl:27954
05-19 [Link].016 479 1594 I libPowerHal: [PE] scn:1 hdl:27954
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].017 918 9082 I mtkpower_client: ret_hdl:27955
05-19 [Link].017 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27955 hint:-1
pid:918 duration:0 => ret_hdl:27955
05-19 [Link].017 479 1594 I libPowerHal: [PE] scn:2 hdl:27955
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].212 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].214 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27956 hint:-1
pid:918 duration:0 => ret_hdl:27956
05-19 [Link].214 479 1594 I libPowerHal: [PE] scn:3 hdl:27956
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].220 918 9082 I mtkpower_client: ret_hdl:27956
05-19 [Link].220 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].221 918 9082 I mtkpower_client: ret_hdl:27957
05-19 [Link].221 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27957 hint:-1
pid:918 duration:0 => ret_hdl:27957
05-19 [Link].221 479 1594 I libPowerHal: [PE] scn:4 hdl:27957
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].392 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].393 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:27958 hint:-1
pid:918 duration:0 => ret_hdl:27958
05-19 [Link].393 479 1594 I libPowerHal: [PE] scn:5 hdl:27958
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].393 918 9082 I mtkpower_client: ret_hdl:27958
05-19 [Link].393 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].394 918 9082 I mtkpower_client: ret_hdl:27959
05-19 [Link].398 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:27959 hint:-1
pid:918 duration:0 => ret_hdl:27959
05-19 [Link].399 479 1594 I libPowerHal: [PE] scn:7 hdl:27959
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].548 918 9082 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9082
05-19 [Link].549 479 1594 I libPowerHal: [perfLockAcq] idx:8 hdl:27960 hint:-1
pid:918 duration:0 => ret_hdl:27960
05-19 [Link].549 479 1594 I libPowerHal: [PE] scn:8 hdl:27960
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].555 918 9082 I mtkpower_client: ret_hdl:27960
05-19 [Link].668 918 9082 I mtkpower_client: perf_lock_rel, hdl:27960,
tid:9082
05-19 [Link].668 918 9082 I mtkpower_client: perf_lock_rel, hdl:27959,
tid:9082
05-19 [Link].668 918 9082 I mtkpower_client: perf_lock_rel, hdl:27958,
tid:9082
05-19 [Link].669 479 1594 I libPowerHal: [PD] scn:8 hdl:27960
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].670 479 1594 I libPowerHal: [PD] scn:7 hdl:27959
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].670 479 1594 I libPowerHal: [PD] scn:5 hdl:27958
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].793 918 9082 I mtkpower_client: perf_lock_rel, hdl:27957,
tid:9082
05-19 [Link].793 918 9082 I mtkpower_client: perf_lock_rel, hdl:27956,
tid:9082
05-19 [Link].793 479 1594 I libPowerHal: [PD] scn:4 hdl:27957
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].801 479 1594 I libPowerHal: [PD] scn:3 hdl:27956
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].079 918 9082 I mtkpower_client: perf_lock_rel, hdl:27955,
tid:9082
05-19 [Link].080 918 9082 I mtkpower_client: perf_lock_rel, hdl:27954,
tid:9082
05-19 [Link].080 479 1594 I libPowerHal: [PD] scn:2 hdl:27955
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].083 479 1594 I libPowerHal: [PD] scn:1 hdl:27954
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].858 918 1065 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].859 918 1065 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].862 918 11716 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].862 918 11716 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].863 918 1959 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].863 918 1780 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].864 918 5033 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].982 918 9161 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].982 918 9161 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].982 918 9161 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].984 918 9161 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].984 918 9161 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18821
05-19 [Link].984 918 9161 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe1ef4000
05-19 [Link].984 918 9161 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].002 918 9167 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9167
05-19 [Link].003 918 9167 I mtkpower_client: ret_hdl:27966
05-19 [Link].003 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27966 hint:-1
pid:918 duration:0 => ret_hdl:27966
05-19 [Link].003 479 1594 I libPowerHal: [PE] scn:2 hdl:27966
lock_user:[email protected] pid:918 tid:9167 dur:0
05-19 [Link].011 918 9161 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].011 918 9161 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].011 918 9161 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].011 918 9161 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].011 918 9161 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].148 918 9076 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].172 918 9076 I mtkpower_client: perf_lock_rel, hdl:27960,
tid:9076
05-19 [Link].173 918 9076 I mtkpower_client: perf_lock_rel, hdl:27959,
tid:9076
05-19 [Link].173 918 9076 I mtkpower_client: perf_lock_rel, hdl:27958,
tid:9076
05-19 [Link].173 918 9076 I mtkpower_client: perf_lock_rel, hdl:27957,
tid:9076
05-19 [Link].174 918 9076 I mtkpower_client: perf_lock_rel, hdl:27956,
tid:9076
05-19 [Link].176 918 9076 I mtkpower_client: perf_lock_rel, hdl:27955,
tid:9076
05-19 [Link].179 918 9076 I mtkpower_client: perf_lock_rel, hdl:27954,
tid:9076
05-19 [Link].180 918 9076 I mtkpower_client: perf_lock_rel, hdl:27953,
tid:9076
05-19 [Link].180 918 9076 I mtkpower_client: perf_lock_rel, hdl:27952,
tid:9076
05-19 [Link].181 479 1594 I libPowerHal: [PD] scn:0 hdl:27953
lock_user:[email protected] pid:918 tid:9082 dur:0
05-19 [Link].305 918 9166 I mtkpower_client: perf_lock_rel, hdl:27966,
tid:9166
05-19 [Link].305 918 9166 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9166
05-19 [Link].307 479 1594 I libPowerHal: [PD] scn:2 hdl:27966
lock_user:[email protected] pid:918 tid:9167 dur:0
05-19 [Link].310 918 9166 I mtkpower_client: ret_hdl:27967
05-19 [Link].310 918 9166 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9166
05-19 [Link].310 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27967 hint:-1
pid:918 duration:0 => ret_hdl:27967
05-19 [Link].310 479 1594 I libPowerHal: [PE] scn:0 hdl:27967
lock_user:[email protected] pid:918 tid:9166 dur:0
05-19 [Link].311 918 9166 I mtkpower_client: ret_hdl:27968
05-19 [Link].311 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27968 hint:-1
pid:918 duration:0 => ret_hdl:27968
05-19 [Link].312 479 1594 I libPowerHal: [PE] scn:2 hdl:27968
lock_user:[email protected] pid:918 tid:9166 dur:0
05-19 [Link].573 918 1959 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].574 918 1959 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].578 918 1959 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].578 918 1959 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].579 918 1959 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].580 918 1066 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].580 918 1066 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].618 918 9206 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f62810
05-19 [Link].618 918 9206 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].618 918 9206 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].619 918 9206 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].621 918 9206 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].621 918 9206 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe245d000
05-19 [Link].621 918 9206 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].627 918 9211 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9211
05-19 [Link].633 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27974 hint:-1
pid:918 duration:0 => ret_hdl:27974
05-19 [Link].634 479 1594 I libPowerHal: [PE] scn:4 hdl:27974
lock_user:[email protected] pid:918 tid:9211 dur:0
05-19 [Link].637 918 9211 I mtkpower_client: ret_hdl:27974
05-19 [Link].657 918 9206 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].657 918 9206 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].657 918 9206 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].657 918 9206 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].657 918 9206 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].835 918 9160 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].865 918 9160 I mtkpower_client: perf_lock_rel, hdl:27968,
tid:9160
05-19 [Link].866 918 9160 I mtkpower_client: perf_lock_rel, hdl:27967,
tid:9160
05-19 [Link].866 918 9160 I mtkpower_client: perf_lock_rel, hdl:27966,
tid:9160
05-19 [Link].866 479 1594 I libPowerHal: [PD] scn:2 hdl:27968
lock_user:[email protected] pid:918 tid:9166 dur:0
05-19 [Link].868 479 1594 I libPowerHal: [PD] scn:0 hdl:27967
lock_user:[email protected] pid:918 tid:9166 dur:0
05-19 [Link].953 918 9210 I mtkpower_client: perf_lock_rel, hdl:27974,
tid:9210
05-19 [Link].953 918 9210 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9210
05-19 [Link].954 479 1594 I libPowerHal: [PD] scn:4 hdl:27974
lock_user:[email protected] pid:918 tid:9211 dur:0
05-19 [Link].956 918 9210 I mtkpower_client: ret_hdl:27975
05-19 [Link].956 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27975 hint:-1
pid:918 duration:0 => ret_hdl:27975
05-19 [Link].956 479 1594 I libPowerHal: [PE] scn:0 hdl:27975
lock_user:[email protected] pid:918 tid:9210 dur:0
05-19 [Link].266 918 9210 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9210
05-19 [Link].267 918 9210 I mtkpower_client: ret_hdl:27976
05-19 [Link].267 918 9210 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9210
05-19 [Link].267 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27976 hint:-1
pid:918 duration:0 => ret_hdl:27976
05-19 [Link].267 479 1594 I libPowerHal: [PE] scn:2 hdl:27976
lock_user:[email protected] pid:918 tid:9210 dur:0
05-19 [Link].269 918 9210 I mtkpower_client: ret_hdl:27977
05-19 [Link].270 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:27977 hint:-1
pid:918 duration:0 => ret_hdl:27977
05-19 [Link].270 479 1594 I libPowerHal: [PE] scn:3 hdl:27977
lock_user:[email protected] pid:918 tid:9210 dur:0
05-19 [Link].379 918 9210 I mtkpower_client: perf_lock_rel, hdl:27977,
tid:9210
05-19 [Link].381 479 1594 I libPowerHal: [PD] scn:3 hdl:27977
lock_user:[email protected] pid:918 tid:9210 dur:0
05-19 [Link].582 918 9210 I mtkpower_client: perf_lock_rel, hdl:27976,
tid:9210
05-19 [Link].584 479 1594 I libPowerHal: [PD] scn:2 hdl:27976
lock_user:[email protected] pid:918 tid:9210 dur:0
05-19 [Link].865 918 1960 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].865 918 1960 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].869 918 1065 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].869 918 1065 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].870 918 1960 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].870 918 9097 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].871 918 9097 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].977 918 9252 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].977 918 9252 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].978 918 9252 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].981 918 9252 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].981 918 9252 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18821
05-19 [Link].981 918 9252 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe18b7000
05-19 [Link].981 918 9252 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].987 918 9258 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9258
05-19 [Link].989 918 9258 I mtkpower_client: ret_hdl:27983
05-19 [Link].989 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27983 hint:-1
pid:918 duration:0 => ret_hdl:27983
05-19 [Link].989 479 1594 I libPowerHal: [PE] scn:2 hdl:27983
lock_user:[email protected] pid:918 tid:9258 dur:0
05-19 [Link].995 918 9252 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].995 918 9252 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].995 918 9252 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].995 918 9252 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].995 918 9252 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].105 918 9205 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].125 918 9205 I mtkpower_client: perf_lock_rel, hdl:27977,
tid:9205
05-19 [Link].125 918 9205 I mtkpower_client: perf_lock_rel, hdl:27976,
tid:9205
05-19 [Link].126 918 9205 I mtkpower_client: perf_lock_rel, hdl:27975,
tid:9205
05-19 [Link].131 918 9205 I mtkpower_client: perf_lock_rel, hdl:27974,
tid:9205
05-19 [Link].132 479 1594 I libPowerHal: [PD] scn:0 hdl:27975
lock_user:[email protected] pid:918 tid:9210 dur:0
05-19 [Link].317 918 1784 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].317 918 1784 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].319 918 1784 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].319 918 1784 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].320 918 1784 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].320 918 1784 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].320 918 1784 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].341 918 9257 I mtkpower_client: perf_lock_rel, hdl:27983,
tid:9257
05-19 [Link].341 918 9257 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9257
05-19 [Link].342 479 1594 I libPowerHal: [PD] scn:2 hdl:27983
lock_user:[email protected] pid:918 tid:9258 dur:0
05-19 [Link].343 918 9257 I mtkpower_client: ret_hdl:27989
05-19 [Link].343 918 9257 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9257
05-19 [Link].343 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27989 hint:-1
pid:918 duration:0 => ret_hdl:27989
05-19 [Link].343 479 1594 I libPowerHal: [PE] scn:0 hdl:27989
lock_user:[email protected] pid:918 tid:9257 dur:0
05-19 [Link].344 918 9257 I mtkpower_client: ret_hdl:27990
05-19 [Link].344 918 9257 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9257
05-19 [Link].345 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27990 hint:-1
pid:918 duration:0 => ret_hdl:27990
05-19 [Link].345 479 1594 I libPowerHal: [PE] scn:1 hdl:27990
lock_user:[email protected] pid:918 tid:9257 dur:0
05-19 [Link].346 918 9257 I mtkpower_client: ret_hdl:27991
05-19 [Link].349 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:27991 hint:-1
pid:918 duration:0 => ret_hdl:27991
05-19 [Link].349 479 1594 I libPowerHal: [PE] scn:2 hdl:27991
lock_user:[email protected] pid:918 tid:9257 dur:0
05-19 [Link].415 918 9297 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].415 918 9297 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].415 918 9297 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].416 918 9297 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].416 918 9297 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 28547
05-19 [Link].416 918 9297 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2df7000
05-19 [Link].416 918 9297 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].423 918 9303 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9303
05-19 [Link].425 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:27992 hint:-1
pid:918 duration:0 => ret_hdl:27992
05-19 [Link].425 479 1594 I libPowerHal: [PE] scn:4 hdl:27992
lock_user:[email protected] pid:918 tid:9303 dur:0
05-19 [Link].426 918 9303 I mtkpower_client: ret_hdl:27992
05-19 [Link].460 918 9297 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].460 918 9297 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].461 918 9297 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].461 918 9297 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].461 918 9297 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].544 918 9251 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].565 918 9251 I mtkpower_client: perf_lock_rel, hdl:27991,
tid:9251
05-19 [Link].565 918 9251 I mtkpower_client: perf_lock_rel, hdl:27990,
tid:9251
05-19 [Link].565 918 9251 I mtkpower_client: perf_lock_rel, hdl:27989,
tid:9251
05-19 [Link].565 918 9251 I mtkpower_client: perf_lock_rel, hdl:27983,
tid:9251
05-19 [Link].568 479 1594 I libPowerHal: [PD] scn:2 hdl:27991
lock_user:[email protected] pid:918 tid:9257 dur:0
05-19 [Link].569 479 1594 I libPowerHal: [PD] scn:1 hdl:27990
lock_user:[email protected] pid:918 tid:9257 dur:0
05-19 [Link].570 479 1594 I libPowerHal: [PD] scn:0 hdl:27989
lock_user:[email protected] pid:918 tid:9257 dur:0
05-19 [Link].726 918 9302 I mtkpower_client: perf_lock_rel, hdl:27992,
tid:9302
05-19 [Link].726 918 9302 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9302
05-19 [Link].727 479 1594 I libPowerHal: [PD] scn:4 hdl:27992
lock_user:[email protected] pid:918 tid:9303 dur:0
05-19 [Link].728 918 9302 I mtkpower_client: ret_hdl:27993
05-19 [Link].728 918 9302 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9302
05-19 [Link].729 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:27993 hint:-1
pid:918 duration:0 => ret_hdl:27993
05-19 [Link].729 479 1594 I libPowerHal: [PE] scn:0 hdl:27993
lock_user:[email protected] pid:918 tid:9302 dur:0
05-19 [Link].729 918 9302 I mtkpower_client: ret_hdl:27994
05-19 [Link].730 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27994 hint:-1
pid:918 duration:0 => ret_hdl:27994
05-19 [Link].730 479 1594 I libPowerHal: [PE] scn:1 hdl:27994
lock_user:[email protected] pid:918 tid:9302 dur:0
05-19 [Link].225 918 9302 I mtkpower_client: perf_lock_rel, hdl:27994,
tid:9302
05-19 [Link].226 479 1594 I libPowerHal: [PD] scn:1 hdl:27994
lock_user:[email protected] pid:918 tid:9302 dur:0
05-19 [Link].963 918 9302 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9302
05-19 [Link].965 918 9302 I mtkpower_client: ret_hdl:27995
05-19 [Link].965 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:27995 hint:-1
pid:918 duration:0 => ret_hdl:27995
05-19 [Link].966 479 1594 I libPowerHal: [PE] scn:1 hdl:27995
lock_user:[email protected] pid:918 tid:9302 dur:0
05-19 [Link].918 917 917 E wificond: vivo add tx_good 144833 tx_bad 66
rx_good 254305 tx_retry 15934
05-19 [Link].800 918 1960 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].801 918 1960 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].805 918 1960 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].805 918 1960 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].806 918 1960 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].806 918 1960 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].807 918 1960 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].852 918 9344 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].852 918 9344 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].852 918 9344 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].854 918 9344 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].854 918 9344 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 18821
05-19 [Link].854 918 9344 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0bf4000
05-19 [Link].854 918 9344 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].858 918 9349 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9349
05-19 [Link].859 918 9349 I mtkpower_client: ret_hdl:28001
05-19 [Link].860 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28001 hint:-1
pid:918 duration:0 => ret_hdl:28001
05-19 [Link].860 479 1594 I libPowerHal: [PE] scn:3 hdl:28001
lock_user:[email protected] pid:918 tid:9349 dur:0
05-19 [Link].880 918 9344 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].880 918 9344 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].880 918 9344 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].880 918 9344 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].880 918 9344 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].078 918 9296 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].120 918 9296 I mtkpower_client: perf_lock_rel, hdl:27995,
tid:9296
05-19 [Link].121 918 9296 I mtkpower_client: perf_lock_rel, hdl:27993,
tid:9296
05-19 [Link].121 918 9296 I mtkpower_client: perf_lock_rel, hdl:27992,
tid:9296
05-19 [Link].122 479 1594 I libPowerHal: [PD] scn:1 hdl:27995
lock_user:[email protected] pid:918 tid:9302 dur:0
05-19 [Link].126 479 1594 I libPowerHal: [PD] scn:0 hdl:27993
lock_user:[email protected] pid:918 tid:9302 dur:0
05-19 [Link].214 918 9348 I mtkpower_client: perf_lock_rel, hdl:28001,
tid:9348
05-19 [Link].214 918 9348 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9348
05-19 [Link].216 479 1594 I libPowerHal: [PD] scn:3 hdl:28001
lock_user:[email protected] pid:918 tid:9349 dur:0
05-19 [Link].218 918 9348 I mtkpower_client: ret_hdl:28002
05-19 [Link].218 918 9348 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9348
05-19 [Link].219 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28002 hint:-1
pid:918 duration:0 => ret_hdl:28002
05-19 [Link].219 479 1594 I libPowerHal: [PE] scn:0 hdl:28002
lock_user:[email protected] pid:918 tid:9348 dur:0
05-19 [Link].220 918 9348 I mtkpower_client: ret_hdl:28003
05-19 [Link].220 918 9348 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9348
05-19 [Link].220 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28003 hint:-1
pid:918 duration:0 => ret_hdl:28003
05-19 [Link].220 479 1594 I libPowerHal: [PE] scn:1 hdl:28003
lock_user:[email protected] pid:918 tid:9348 dur:0
05-19 [Link].221 918 9348 I mtkpower_client: ret_hdl:28004
05-19 [Link].221 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28004 hint:-1
pid:918 duration:0 => ret_hdl:28004
05-19 [Link].221 479 1594 I libPowerHal: [PE] scn:3 hdl:28004
lock_user:[email protected] pid:918 tid:9348 dur:0
05-19 [Link].280 918 9348 I mtkpower_client: perf_lock_rel, hdl:28004,
tid:9348
05-19 [Link].281 479 1594 I libPowerHal: [PD] scn:3 hdl:28004
lock_user:[email protected] pid:918 tid:9348 dur:0
05-19 [Link].358 918 9348 I mtkpower_client: perf_lock_rel, hdl:28003,
tid:9348
05-19 [Link].359 479 1594 I libPowerHal: [PD] scn:1 hdl:28003
lock_user:[email protected] pid:918 tid:9348 dur:0
05-19 [Link].501 918 1820 E OMXNodeInstance:
setParameter(0xe9930804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].501 918 1820 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 918 E MtkOmxVdecEx: [0xe9930800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].510 918 918 E OMXNodeInstance:
setConfig(0xe9930804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 1780 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].510 918 15680 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].511 918 9097 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].551 918 9387 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].551 918 9387 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].551 918 9387 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].552 918 9387 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].552 918 9387 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16953
05-19 [Link].552 918 9387 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2df7000
05-19 [Link].552 918 9387 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].578 918 9394 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9394
05-19 [Link].579 918 9394 I mtkpower_client: ret_hdl:28010
05-19 [Link].580 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28010 hint:-1
pid:918 duration:0 => ret_hdl:28010
05-19 [Link].580 479 1594 I libPowerHal: [PE] scn:2 hdl:28010
lock_user:[email protected] pid:918 tid:9394 dur:0
05-19 [Link].613 918 9387 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].613 918 9387 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].613 918 9387 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].613 918 9387 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].613 918 9387 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].806 918 9343 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].818 918 9393 I mtkpower_client: perf_lock_rel, hdl:28010,
tid:9393
05-19 [Link].819 918 9393 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9393
05-19 [Link].819 479 1594 I libPowerHal: [PD] scn:2 hdl:28010
lock_user:[email protected] pid:918 tid:9394 dur:0
05-19 [Link].820 918 9393 I mtkpower_client: ret_hdl:28011
05-19 [Link].820 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28011 hint:-1
pid:918 duration:0 => ret_hdl:28011
05-19 [Link].820 479 1594 I libPowerHal: [PE] scn:3 hdl:28011
lock_user:[email protected] pid:918 tid:9393 dur:0
05-19 [Link].823 918 9343 I mtkpower_client: perf_lock_rel, hdl:28004,
tid:9343
05-19 [Link].824 918 9343 I mtkpower_client: perf_lock_rel, hdl:28003,
tid:9343
05-19 [Link].824 918 9343 I mtkpower_client: perf_lock_rel, hdl:28002,
tid:9343
05-19 [Link].824 918 9343 I mtkpower_client: perf_lock_rel, hdl:28001,
tid:9343
05-19 [Link].827 479 1594 I libPowerHal: [PD] scn:0 hdl:28002
lock_user:[email protected] pid:918 tid:9348 dur:0
05-19 [Link].615 918 1960 E OMXNodeInstance:
setParameter(0xea48d804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].616 918 1960 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].619 918 1960 E MtkOmxVdecEx: [0xea48d800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].619 918 1960 E OMXNodeInstance:
setConfig(0xea48d804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].620 918 1960 E OMXNodeInstance:
getParameter(0xea48d804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].620 918 1960 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].620 918 1960 E OMXNodeInstance:
getConfig(0xea48d804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].659 918 9436 E VDO_LOG : GetDecoderAPI hWrapper 0xea09d810
05-19 [Link].659 918 9436 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].659 918 9436 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].661 918 9436 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].661 918 9436 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 16123
05-19 [Link].661 918 9436 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe06f3000
05-19 [Link].661 918 9436 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].663 918 9441 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9441
05-19 [Link].664 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28017 hint:-1
pid:918 duration:0 => ret_hdl:28017
05-19 [Link].664 479 1594 I libPowerHal: [PE] scn:1 hdl:28017
lock_user:[email protected] pid:918 tid:9441 dur:0
05-19 [Link].666 918 9441 I mtkpower_client: ret_hdl:28017
05-19 [Link].690 918 9436 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].690 918 9436 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].690 918 9436 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].690 918 9436 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].691 918 9436 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].837 918 9386 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].862 918 9386 I mtkpower_client: perf_lock_rel, hdl:28011,
tid:9386
05-19 [Link].863 918 9386 I mtkpower_client: perf_lock_rel, hdl:28010,
tid:9386
05-19 [Link].865 479 1594 I libPowerHal: [PD] scn:3 hdl:28011
lock_user:[email protected] pid:918 tid:9393 dur:0
05-19 [Link].959 918 9440 I mtkpower_client: perf_lock_rel, hdl:28017,
tid:9440
05-19 [Link].959 918 9440 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9440
05-19 [Link].964 479 1594 I libPowerHal: [PD] scn:1 hdl:28017
lock_user:[email protected] pid:918 tid:9441 dur:0
05-19 [Link].969 918 9440 I mtkpower_client: ret_hdl:28018
05-19 [Link].969 918 9440 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9440
05-19 [Link].969 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28018 hint:-1
pid:918 duration:0 => ret_hdl:28018
05-19 [Link].969 479 1594 I libPowerHal: [PE] scn:1 hdl:28018
lock_user:[email protected] pid:918 tid:9440 dur:0
05-19 [Link].969 918 9440 I mtkpower_client: ret_hdl:28019
05-19 [Link].969 918 9440 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9440
05-19 [Link].969 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28019 hint:-1
pid:918 duration:0 => ret_hdl:28019
05-19 [Link].970 479 1594 I libPowerHal: [PE] scn:2 hdl:28019
lock_user:[email protected] pid:918 tid:9440 dur:0
05-19 [Link].970 918 9440 I mtkpower_client: ret_hdl:28020
05-19 [Link].970 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28020 hint:-1
pid:918 duration:0 => ret_hdl:28020
05-19 [Link].970 479 1594 I libPowerHal: [PE] scn:3 hdl:28020
lock_user:[email protected] pid:918 tid:9440 dur:0
05-19 [Link].254 918 9440 I mtkpower_client: perf_lock_rel, hdl:28020,
tid:9440
05-19 [Link].255 918 9440 I mtkpower_client: perf_lock_rel, hdl:28019,
tid:9440
05-19 [Link].255 479 1594 I libPowerHal: [PD] scn:3 hdl:28020
lock_user:[email protected] pid:918 tid:9440 dur:0
05-19 [Link].256 479 1594 I libPowerHal: [PD] scn:2 hdl:28019
lock_user:[email protected] pid:918 tid:9440 dur:0
05-19 [Link].824 918 918 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].825 918 11990 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 5020 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].827 918 5020 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].828 918 5020 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].829 918 11990 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].829 918 918 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].863 918 9482 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].863 918 9482 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].863 918 9482 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].864 918 9482 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].864 918 9482 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 6730
05-19 [Link].864 918 9482 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2cf6000
05-19 [Link].864 918 9482 E VDO_LOG : vp9_dec_init() u4Width 576, u4Height
1024, Offset 0, Padding 0
05-19 [Link].867 918 9487 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9487
05-19 [Link].868 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28024 hint:-1
pid:918 duration:0 => ret_hdl:28024
05-19 [Link].868 479 1594 I libPowerHal: [PE] scn:0 hdl:28024
lock_user:[email protected] pid:918 tid:9487 dur:0
05-19 [Link].868 918 9487 I mtkpower_client: ret_hdl:28024
05-19 [Link].907 918 9482 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].907 918 9482 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].907 918 9482 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].907 918 9482 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].907 918 9482 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].345 918 9435 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].383 918 9435 I mtkpower_client: perf_lock_rel, hdl:28020,
tid:9435
05-19 [Link].384 918 9435 I mtkpower_client: perf_lock_rel, hdl:28019,
tid:9435
05-19 [Link].386 918 9435 I mtkpower_client: perf_lock_rel, hdl:28018,
tid:9435
05-19 [Link].386 479 1594 I libPowerHal: [PD] scn:1 hdl:28018
lock_user:[email protected] pid:918 tid:9440 dur:0
05-19 [Link].388 918 9435 I mtkpower_client: perf_lock_rel, hdl:28017,
tid:9435
05-19 [Link].453 918 9486 I mtkpower_client: perf_lock_rel, hdl:28024,
tid:9486
05-19 [Link].453 918 9486 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9486
05-19 [Link].454 479 1594 I libPowerHal: [PD] scn:0 hdl:28024
lock_user:[email protected] pid:918 tid:9487 dur:0
05-19 [Link].462 918 9486 I mtkpower_client: ret_hdl:28027
05-19 [Link].462 918 9486 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9486
05-19 [Link].466 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28027 hint:-1
pid:918 duration:0 => ret_hdl:28027
05-19 [Link].466 479 1594 I libPowerHal: [PE] scn:0 hdl:28027
lock_user:[email protected] pid:918 tid:9486 dur:0
05-19 [Link].467 918 9486 I mtkpower_client: ret_hdl:28028
05-19 [Link].467 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28028 hint:-1
pid:918 duration:0 => ret_hdl:28028
05-19 [Link].467 479 1594 I libPowerHal: [PE] scn:1 hdl:28028
lock_user:[email protected] pid:918 tid:9486 dur:0
05-19 [Link].524 918 9486 I mtkpower_client: perf_lock_rel, hdl:28028,
tid:9486
05-19 [Link].525 479 1594 I libPowerHal: [PD] scn:1 hdl:28028
lock_user:[email protected] pid:918 tid:9486 dur:0
05-19 [Link].222 918 5020 E OMXNodeInstance:
setParameter(0xe9ec3004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].222 918 5020 E OMXNodeInstance:
getParameter(0xe9ec3004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].224 918 5020 E MtkOmxVdecEx: [0xe9ec3000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].224 918 5020 E OMXNodeInstance:
setConfig(0xe9ec3004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].225 918 5020 E OMXNodeInstance:
getParameter(0xe9ec3004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].225 918 5020 E OMXNodeInstance:
getConfig(0xe9ec3004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].226 918 5020 E OMXNodeInstance:
getConfig(0xe9ec3004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].260 918 9528 E VDO_LOG : GetDecoderAPI hWrapper 0xea0b0810
05-19 [Link].260 918 9528 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].261 918 9528 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].261 918 9528 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].262 918 9528 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 9435
05-19 [Link].262 918 9528 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe0720000
05-19 [Link].262 918 9528 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].264 918 9535 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9535
05-19 [Link].265 918 9535 I mtkpower_client: ret_hdl:28034
05-19 [Link].265 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28034 hint:-1
pid:918 duration:0 => ret_hdl:28034
05-19 [Link].265 479 1594 I libPowerHal: [PE] scn:3 hdl:28034
lock_user:[email protected] pid:918 tid:9535 dur:0
05-19 [Link].289 918 9528 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].289 918 9528 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].289 918 9528 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].289 918 9528 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].289 918 9528 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].506 918 9481 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].520 918 9481 I mtkpower_client: perf_lock_rel, hdl:28028,
tid:9481
05-19 [Link].520 918 9481 I mtkpower_client: perf_lock_rel, hdl:28027,
tid:9481
05-19 [Link].520 918 9481 I mtkpower_client: perf_lock_rel, hdl:28024,
tid:9481
05-19 [Link].522 479 1594 I libPowerHal: [PD] scn:0 hdl:28027
lock_user:[email protected] pid:918 tid:9486 dur:0
05-19 [Link].559 918 9533 I mtkpower_client: perf_lock_rel, hdl:28034,
tid:9533
05-19 [Link].559 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].562 479 1594 I libPowerHal: [PD] scn:3 hdl:28034
lock_user:[email protected] pid:918 tid:9535 dur:0
05-19 [Link].565 918 9533 I mtkpower_client: ret_hdl:28035
05-19 [Link].565 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28035 hint:-1
pid:918 duration:0 => ret_hdl:28035
05-19 [Link].565 479 1594 I libPowerHal: [PE] scn:0 hdl:28035
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].482 918 15538 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].482 918 1064 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].486 918 15680 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].486 918 15680 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].487 918 15538 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].488 918 15680 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].489 918 15538 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].525 918 9577 E VDO_LOG : GetDecoderAPI hWrapper 0xea2f0810
05-19 [Link].525 918 9577 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].525 918 9577 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].527 918 9577 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].527 918 9577 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 24790
05-19 [Link].527 918 9577 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2cf4000
05-19 [Link].527 918 9577 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].531 918 9582 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9582
05-19 [Link].532 918 9582 I mtkpower_client: ret_hdl:28039
05-19 [Link].532 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28039 hint:-1
pid:918 duration:0 => ret_hdl:28039
05-19 [Link].532 479 1594 I libPowerHal: [PE] scn:2 hdl:28039
lock_user:[email protected] pid:918 tid:9582 dur:0
05-19 [Link].555 918 9577 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].556 918 9577 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].556 918 9577 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].556 918 9577 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].556 918 9577 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].232 918 9576 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].250 918 9576 I mtkpower_client: perf_lock_rel, hdl:28039,
tid:9576
05-19 [Link].251 479 1594 I libPowerHal: [PD] scn:2 hdl:28039
lock_user:[email protected] pid:918 tid:9582 dur:0
05-19 [Link].359 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].361 918 9533 I mtkpower_client: ret_hdl:28041
05-19 [Link].361 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28041 hint:-1
pid:918 duration:0 => ret_hdl:28041
05-19 [Link].361 479 1594 I libPowerHal: [PE] scn:1 hdl:28041
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].463 918 9533 I mtkpower_client: perf_lock_rel, hdl:28041,
tid:9533
05-19 [Link].464 479 1594 I libPowerHal: [PD] scn:1 hdl:28041
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].750 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].751 918 9533 I mtkpower_client: ret_hdl:28042
05-19 [Link].751 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28042 hint:-1
pid:918 duration:0 => ret_hdl:28042
05-19 [Link].751 479 1594 I libPowerHal: [PE] scn:1 hdl:28042
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].153 918 9533 I mtkpower_client: perf_lock_rel, hdl:28042,
tid:9533
05-19 [Link].154 479 1594 I libPowerHal: [PD] scn:1 hdl:28042
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].377 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].379 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28043 hint:-1
pid:918 duration:0 => ret_hdl:28043
05-19 [Link].380 918 9533 I mtkpower_client: ret_hdl:28043
05-19 [Link].380 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].383 479 1594 I libPowerHal: [PE] scn:1 hdl:28043
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].384 918 9533 I mtkpower_client: ret_hdl:28044
05-19 [Link].385 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28044 hint:-1
pid:918 duration:0 => ret_hdl:28044
05-19 [Link].385 479 1594 I libPowerHal: [PE] scn:2 hdl:28044
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].485 918 9533 I mtkpower_client: perf_lock_rel, hdl:28044,
tid:9533
05-19 [Link].486 479 1594 I libPowerHal: [PD] scn:2 hdl:28044
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].685 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].686 918 9533 I mtkpower_client: ret_hdl:28045
05-19 [Link].686 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28045 hint:-1
pid:918 duration:0 => ret_hdl:28045
05-19 [Link].686 479 1594 I libPowerHal: [PE] scn:2 hdl:28045
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].020 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].021 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28046 hint:-1
pid:918 duration:0 => ret_hdl:28046
05-19 [Link].021 479 1594 I libPowerHal: [PE] scn:3 hdl:28046
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].025 918 9533 I mtkpower_client: ret_hdl:28046
05-19 [Link].159 918 9533 I mtkpower_client: perf_lock_rel, hdl:28046,
tid:9533
05-19 [Link].164 479 1594 I libPowerHal: [PD] scn:3 hdl:28046
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].323 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].324 918 9533 I mtkpower_client: ret_hdl:28047
05-19 [Link].324 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28047 hint:-1
pid:918 duration:0 => ret_hdl:28047
05-19 [Link].324 479 1594 I libPowerHal: [PE] scn:3 hdl:28047
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].418 918 9533 I mtkpower_client: perf_lock_rel, hdl:28047,
tid:9533
05-19 [Link].419 479 1594 I libPowerHal: [PD] scn:3 hdl:28047
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].762 918 9533 I mtkpower_client: perf_lock_rel, hdl:28045,
tid:9533
05-19 [Link].764 479 1594 I libPowerHal: [PD] scn:2 hdl:28045
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].275 918 9533 I mtkpower_client: perf_lock_rel, hdl:28043,
tid:9533
05-19 [Link].277 479 1594 I libPowerHal: [PD] scn:1 hdl:28043
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].040 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].041 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28048 hint:-1
pid:918 duration:0 => ret_hdl:28048
05-19 [Link].042 479 1594 I libPowerHal: [PE] scn:1 hdl:28048
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].042 918 9533 I mtkpower_client: ret_hdl:28048
05-19 [Link].123 918 9533 I mtkpower_client: perf_lock_rel, hdl:28048,
tid:9533
05-19 [Link].125 479 1594 I libPowerHal: [PD] scn:1 hdl:28048
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].386 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].388 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28049 hint:-1
pid:918 duration:0 => ret_hdl:28049
05-19 [Link].388 479 1594 I libPowerHal: [PE] scn:1 hdl:28049
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].389 918 9533 I mtkpower_client: ret_hdl:28049
05-19 [Link].389 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].391 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28050 hint:-1
pid:918 duration:0 => ret_hdl:28050
05-19 [Link].391 479 1594 I libPowerHal: [PE] scn:2 hdl:28050
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].392 918 9533 I mtkpower_client: ret_hdl:28050
05-19 [Link].485 918 9533 I mtkpower_client: perf_lock_rel, hdl:28050,
tid:9533
05-19 [Link].486 479 1594 I libPowerHal: [PD] scn:2 hdl:28050
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].701 918 9533 I mtkpower_client: perf_lock_rel, hdl:28049,
tid:9533
05-19 [Link].702 479 1594 I libPowerHal: [PD] scn:1 hdl:28049
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].049 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].050 918 9533 I mtkpower_client: ret_hdl:28051
05-19 [Link].050 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28051 hint:-1
pid:918 duration:0 => ret_hdl:28051
05-19 [Link].050 479 1594 I libPowerHal: [PE] scn:1 hdl:28051
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].140 918 9533 I mtkpower_client: perf_lock_rel, hdl:28051,
tid:9533
05-19 [Link].142 479 1594 I libPowerHal: [PD] scn:1 hdl:28051
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].318 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].319 918 9533 I mtkpower_client: ret_hdl:28052
05-19 [Link].319 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28052 hint:-1
pid:918 duration:0 => ret_hdl:28052
05-19 [Link].320 479 1594 I libPowerHal: [PE] scn:1 hdl:28052
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].419 918 9533 I mtkpower_client: perf_lock_rel, hdl:28052,
tid:9533
05-19 [Link].420 479 1594 I libPowerHal: [PD] scn:1 hdl:28052
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].617 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].618 918 9533 I mtkpower_client: ret_hdl:28053
05-19 [Link].619 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28053 hint:-1
pid:918 duration:0 => ret_hdl:28053
05-19 [Link].619 479 1594 I libPowerHal: [PE] scn:1 hdl:28053
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].703 918 9533 I mtkpower_client: perf_lock_rel, hdl:28053,
tid:9533
05-19 [Link].704 479 1594 I libPowerHal: [PD] scn:1 hdl:28053
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].742 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].743 918 9533 I mtkpower_client: ret_hdl:28055
05-19 [Link].743 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28055 hint:-1
pid:918 duration:0 => ret_hdl:28055
05-19 [Link].744 479 1594 I libPowerHal: [PE] scn:2 hdl:28055
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].842 918 9533 I mtkpower_client: perf_lock_rel, hdl:28055,
tid:9533
05-19 [Link].843 479 1594 I libPowerHal: [PD] scn:2 hdl:28055
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].900 918 1960 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].900 918 1960 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].903 918 1960 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].903 918 1960 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].904 918 1960 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].904 918 1960 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].905 918 1960 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].942 918 9630 E VDO_LOG : GetDecoderAPI hWrapper 0xea2f0810
05-19 [Link].942 918 9630 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].942 918 9630 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].949 918 9630 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].951 918 9630 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 24790
05-19 [Link].951 918 9630 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe265f000
05-19 [Link].951 918 9630 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].964 918 9636 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9636
05-19 [Link].965 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28060 hint:-1
pid:918 duration:0 => ret_hdl:28060
05-19 [Link].965 479 1594 I libPowerHal: [PE] scn:2 hdl:28060
lock_user:[email protected] pid:918 tid:9636 dur:0
05-19 [Link].966 918 9636 I mtkpower_client: ret_hdl:28060
05-19 [Link].981 918 9630 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].981 918 9630 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].981 918 9630 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].981 918 9630 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].981 918 9630 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].054 918 9533 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9533
05-19 [Link].059 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28061 hint:-1
pid:918 duration:0 => ret_hdl:28061
05-19 [Link].059 479 1594 I libPowerHal: [PE] scn:3 hdl:28061
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].060 918 9533 I mtkpower_client: ret_hdl:28061
05-19 [Link].150 918 9527 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].210 918 9527 I mtkpower_client: perf_lock_rel, hdl:28047,
tid:9527
05-19 [Link].210 918 9527 I mtkpower_client: perf_lock_rel, hdl:28050,
tid:9527
05-19 [Link].212 918 9527 I mtkpower_client: perf_lock_rel, hdl:28061,
tid:9527
05-19 [Link].212 918 9527 I mtkpower_client: perf_lock_rel, hdl:28035,
tid:9527
05-19 [Link].213 918 9527 I mtkpower_client: perf_lock_rel, hdl:28034,
tid:9527
05-19 [Link].214 479 1594 I libPowerHal: [PD] scn:3 hdl:28061
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].215 479 1594 I libPowerHal: [PD] scn:0 hdl:28035
lock_user:[email protected] pid:918 tid:9533 dur:0
05-19 [Link].370 918 9635 I mtkpower_client: perf_lock_rel, hdl:28060,
tid:9635
05-19 [Link].370 918 9635 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9635
05-19 [Link].370 479 1594 I libPowerHal: [PD] scn:2 hdl:28060
lock_user:[email protected] pid:918 tid:9636 dur:0
05-19 [Link].375 918 9635 I mtkpower_client: ret_hdl:28062
05-19 [Link].375 918 9635 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9635
05-19 [Link].378 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28062 hint:-1
pid:918 duration:0 => ret_hdl:28062
05-19 [Link].378 479 1594 I libPowerHal: [PE] scn:0 hdl:28062
lock_user:[email protected] pid:918 tid:9635 dur:0
05-19 [Link].379 918 9635 I mtkpower_client: ret_hdl:28063
05-19 [Link].379 918 9635 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9635
05-19 [Link].380 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28063 hint:-1
pid:918 duration:0 => ret_hdl:28063
05-19 [Link].380 479 1594 I libPowerHal: [PE] scn:2 hdl:28063
lock_user:[email protected] pid:918 tid:9635 dur:0
05-19 [Link].381 918 9635 I mtkpower_client: ret_hdl:28064
05-19 [Link].382 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28064 hint:-1
pid:918 duration:0 => ret_hdl:28064
05-19 [Link].382 479 1594 I libPowerHal: [PE] scn:3 hdl:28064
lock_user:[email protected] pid:918 tid:9635 dur:0
05-19 [Link].569 918 9635 I mtkpower_client: perf_lock_rel, hdl:28064,
tid:9635
05-19 [Link].570 479 1594 I libPowerHal: [PD] scn:3 hdl:28064
lock_user:[email protected] pid:918 tid:9635 dur:0
05-19 [Link].632 918 9635 I mtkpower_client: perf_lock_rel, hdl:28063,
tid:9635
05-19 [Link].633 479 1594 I libPowerHal: [PD] scn:2 hdl:28063
lock_user:[email protected] pid:918 tid:9635 dur:0
05-19 [Link].919 918 15538 E OMXNodeInstance:
setParameter(0xea2e1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].920 918 15538 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].924 918 15538 E MtkOmxVdecEx: [0xea2e1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].924 918 15538 E OMXNodeInstance:
setConfig(0xea2e1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].925 918 15538 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].925 918 15538 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].926 918 15538 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].967 918 9675 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].967 918 9675 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].968 918 9675 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].968 918 9675 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].969 918 9675 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 48796
05-19 [Link].969 918 9675 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe3160000
05-19 [Link].969 918 9675 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].972 918 9680 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9680
05-19 [Link].973 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28070 hint:-1
pid:918 duration:0 => ret_hdl:28070
05-19 [Link].973 479 1594 I libPowerHal: [PE] scn:2 hdl:28070
lock_user:[email protected] pid:918 tid:9680 dur:0
05-19 [Link].973 918 9680 I mtkpower_client: ret_hdl:28070
05-19 [Link].009 918 9675 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].009 918 9675 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].009 918 9675 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].009 918 9675 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].009 918 9675 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].085 918 9629 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].107 918 9629 I mtkpower_client: perf_lock_rel, hdl:28064,
tid:9629
05-19 [Link].107 918 9629 I mtkpower_client: perf_lock_rel, hdl:28063,
tid:9629
05-19 [Link].107 918 9629 I mtkpower_client: perf_lock_rel, hdl:28062,
tid:9629
05-19 [Link].107 918 9629 I mtkpower_client: perf_lock_rel, hdl:28060,
tid:9629
05-19 [Link].109 479 1594 I libPowerHal: [PD] scn:0 hdl:28062
lock_user:[email protected] pid:918 tid:9635 dur:0
05-19 [Link].303 918 9679 I mtkpower_client: perf_lock_rel, hdl:28070,
tid:9679
05-19 [Link].303 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].303 479 1594 I libPowerHal: [PD] scn:2 hdl:28070
lock_user:[email protected] pid:918 tid:9680 dur:0
05-19 [Link].304 918 9679 I mtkpower_client: ret_hdl:28071
05-19 [Link].304 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].305 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28071 hint:-1
pid:918 duration:0 => ret_hdl:28071
05-19 [Link].305 479 1594 I libPowerHal: [PE] scn:0 hdl:28071
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].306 918 9679 I mtkpower_client: ret_hdl:28072
05-19 [Link].306 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28072 hint:-1
pid:918 duration:0 => ret_hdl:28072
05-19 [Link].306 479 1594 I libPowerHal: [PE] scn:2 hdl:28072
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].379 918 9679 I mtkpower_client: perf_lock_rel, hdl:28072,
tid:9679
05-19 [Link].380 479 1594 I libPowerHal: [PD] scn:2 hdl:28072
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].714 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].715 918 9679 I mtkpower_client: ret_hdl:28073
05-19 [Link].716 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28073 hint:-1
pid:918 duration:0 => ret_hdl:28073
05-19 [Link].716 479 1594 I libPowerHal: [PE] scn:1 hdl:28073
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].233 918 9679 I mtkpower_client: perf_lock_rel, hdl:28073,
tid:9679
05-19 [Link].234 479 1594 I libPowerHal: [PD] scn:1 hdl:28073
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].694 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].696 918 9679 I mtkpower_client: ret_hdl:28074
05-19 [Link].697 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28074 hint:-1
pid:918 duration:0 => ret_hdl:28074
05-19 [Link].697 479 1594 I libPowerHal: [PE] scn:1 hdl:28074
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].767 918 9679 I mtkpower_client: perf_lock_rel, hdl:28074,
tid:9679
05-19 [Link].769 479 1594 I libPowerHal: [PD] scn:1 hdl:28074
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].401 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].403 918 9679 I mtkpower_client: ret_hdl:28075
05-19 [Link].404 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28075 hint:-1
pid:918 duration:0 => ret_hdl:28075
05-19 [Link].404 479 1594 I libPowerHal: [PE] scn:1 hdl:28075
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].491 918 9679 I mtkpower_client: perf_lock_rel, hdl:28075,
tid:9679
05-19 [Link].493 479 1594 I libPowerHal: [PD] scn:1 hdl:28075
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].748 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].749 918 9679 I mtkpower_client: ret_hdl:28076
05-19 [Link].749 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].749 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28076 hint:-1
pid:918 duration:0 => ret_hdl:28076
05-19 [Link].749 479 1594 I libPowerHal: [PE] scn:1 hdl:28076
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].752 918 9679 I mtkpower_client: ret_hdl:28077
05-19 [Link].752 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28077 hint:-1
pid:918 duration:0 => ret_hdl:28077
05-19 [Link].752 479 1594 I libPowerHal: [PE] scn:2 hdl:28077
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].160 918 9679 I mtkpower_client: perf_lock_rel, hdl:28077,
tid:9679
05-19 [Link].162 479 1594 I libPowerHal: [PD] scn:2 hdl:28077
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].550 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].551 918 9679 I mtkpower_client: ret_hdl:28078
05-19 [Link].551 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].551 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28078 hint:-1
pid:918 duration:0 => ret_hdl:28078
05-19 [Link].551 479 1594 I libPowerHal: [PE] scn:2 hdl:28078
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].552 918 9679 I mtkpower_client: ret_hdl:28079
05-19 [Link].553 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28079 hint:-1
pid:918 duration:0 => ret_hdl:28079
05-19 [Link].553 479 1594 I libPowerHal: [PE] scn:3 hdl:28079
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].656 918 9679 I mtkpower_client: perf_lock_rel, hdl:28079,
tid:9679
05-19 [Link].657 479 1594 I libPowerHal: [PD] scn:3 hdl:28079
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].836 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].837 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28080 hint:-1
pid:918 duration:0 => ret_hdl:28080
05-19 [Link].837 479 1594 I libPowerHal: [PE] scn:3 hdl:28080
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].838 918 9679 I mtkpower_client: ret_hdl:28080
05-19 [Link].923 918 9679 I mtkpower_client: perf_lock_rel, hdl:28080,
tid:9679
05-19 [Link].925 479 1594 I libPowerHal: [PD] scn:3 hdl:28080
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].166 918 9679 I mtkpower_client: perf_lock_rel, hdl:28078,
tid:9679
05-19 [Link].167 479 1594 I libPowerHal: [PD] scn:2 hdl:28078
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].332 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].333 918 9679 I mtkpower_client: ret_hdl:28081
05-19 [Link].334 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28081 hint:-1
pid:918 duration:0 => ret_hdl:28081
05-19 [Link].334 479 1594 I libPowerHal: [PE] scn:2 hdl:28081
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].433 918 9679 I mtkpower_client: perf_lock_rel, hdl:28081,
tid:9679
05-19 [Link].434 479 1594 I libPowerHal: [PD] scn:2 hdl:28081
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].672 918 9679 I mtkpower_client: perf_lock_rel, hdl:28076,
tid:9679
05-19 [Link].673 479 1594 I libPowerHal: [PD] scn:1 hdl:28076
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].841 918 9679 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9679
05-19 [Link].842 918 9679 I mtkpower_client: ret_hdl:28082
05-19 [Link].843 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28082 hint:-1
pid:918 duration:0 => ret_hdl:28082
05-19 [Link].843 479 1594 I libPowerHal: [PE] scn:1 hdl:28082
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].920 918 9679 I mtkpower_client: perf_lock_rel, hdl:28082,
tid:9679
05-19 [Link].921 479 1594 I libPowerHal: [PD] scn:1 hdl:28082
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].261 918 5033 E OMXNodeInstance:
setParameter(0xe9c5d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].262 918 5033 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].265 918 5033 E MtkOmxVdecEx: [0xe9c5d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].266 918 5033 E OMXNodeInstance:
setConfig(0xe9c5d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].266 918 5033 E OMXNodeInstance:
getParameter(0xe9c5d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].267 918 5033 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].267 918 5033 E OMXNodeInstance:
getConfig(0xe9c5d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].407 918 9726 E VDO_LOG : GetDecoderAPI hWrapper 0xea2e7810
05-19 [Link].407 918 9726 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].407 918 9726 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].414 918 9726 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].414 918 9726 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 24790
05-19 [Link].414 918 9726 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe225d000
05-19 [Link].414 918 9726 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].421 918 9734 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9734
05-19 [Link].422 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28088 hint:-1
pid:918 duration:0 => ret_hdl:28088
05-19 [Link].422 479 1594 I libPowerHal: [PE] scn:2 hdl:28088
lock_user:[email protected] pid:918 tid:9734 dur:0
05-19 [Link].423 918 9734 I mtkpower_client: ret_hdl:28088
05-19 [Link].444 918 9726 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].444 918 9726 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].444 918 9726 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].444 918 9726 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].444 918 9726 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].490 918 9674 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].512 918 9674 I mtkpower_client: perf_lock_rel, hdl:28080,
tid:9674
05-19 [Link].513 918 9674 I mtkpower_client: perf_lock_rel, hdl:28081,
tid:9674
05-19 [Link].515 918 9674 I mtkpower_client: perf_lock_rel, hdl:28082,
tid:9674
05-19 [Link].515 918 9674 I mtkpower_client: perf_lock_rel, hdl:28071,
tid:9674
05-19 [Link].515 918 9674 I mtkpower_client: perf_lock_rel, hdl:28070,
tid:9674
05-19 [Link].516 479 1594 I libPowerHal: [PD] scn:0 hdl:28071
lock_user:[email protected] pid:918 tid:9679 dur:0
05-19 [Link].663 918 9733 I mtkpower_client: perf_lock_rel, hdl:28088,
tid:9733
05-19 [Link].663 918 9733 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9733
05-19 [Link].663 479 1594 I libPowerHal: [PD] scn:2 hdl:28088
lock_user:[email protected] pid:918 tid:9734 dur:0
05-19 [Link].664 918 9733 I mtkpower_client: ret_hdl:28089
05-19 [Link].664 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28089 hint:-1
pid:918 duration:0 => ret_hdl:28089
05-19 [Link].664 479 1594 I libPowerHal: [PE] scn:0 hdl:28089
lock_user:[email protected] pid:918 tid:9733 dur:0
05-19 [Link].986 918 1960 E OMXNodeInstance:
setParameter(0xea2e1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].987 918 1960 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].992 918 1960 E MtkOmxVdecEx: [0xea2e1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].992 918 1960 E OMXNodeInstance:
setConfig(0xea2e1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].993 918 1960 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].993 918 1960 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].994 918 1960 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].027 918 9774 E VDO_LOG : GetDecoderAPI hWrapper 0xe9e47810
05-19 [Link].028 918 9774 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].028 918 9774 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].029 918 9774 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].029 918 9774 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 15012
05-19 [Link].030 918 9774 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].030 918 9774 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].036 918 9779 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9779
05-19 [Link].037 918 9779 I mtkpower_client: ret_hdl:28095
05-19 [Link].037 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28095 hint:-1
pid:918 duration:0 => ret_hdl:28095
05-19 [Link].037 479 1594 I libPowerHal: [PE] scn:1 hdl:28095
lock_user:[email protected] pid:918 tid:9779 dur:0
05-19 [Link].041 918 9774 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].041 918 9774 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].041 918 9774 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].041 918 9774 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].041 918 9774 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].217 918 9778 I mtkpower_client: perf_lock_rel, hdl:28095,
tid:9778
05-19 [Link].217 918 9778 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9778
05-19 [Link].218 479 1594 I libPowerHal: [PD] scn:1 hdl:28095
lock_user:[email protected] pid:918 tid:9779 dur:0
05-19 [Link].218 918 9778 I mtkpower_client: ret_hdl:28096
05-19 [Link].219 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28096 hint:-1
pid:918 duration:0 => ret_hdl:28096
05-19 [Link].219 479 1594 I libPowerHal: [PE] scn:3 hdl:28096
lock_user:[email protected] pid:918 tid:9778 dur:0
05-19 [Link].261 918 9725 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].290 918 9725 I mtkpower_client: perf_lock_rel, hdl:28089,
tid:9725
05-19 [Link].291 918 9725 I mtkpower_client: perf_lock_rel, hdl:28088,
tid:9725
05-19 [Link].291 479 1594 I libPowerHal: [PD] scn:0 hdl:28089
lock_user:[email protected] pid:918 tid:9733 dur:0
05-19 [Link].023 918 1960 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].023 918 1960 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].028 918 11717 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].028 918 11717 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].029 918 15680 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].029 918 1064 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].030 918 15680 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].067 918 9817 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].067 918 9817 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].067 918 9817 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].073 918 9817 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].074 918 9817 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 21610
05-19 [Link].074 918 9817 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe225d000
05-19 [Link].074 918 9817 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].076 918 9823 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9823
05-19 [Link].077 918 9823 I mtkpower_client: ret_hdl:28100
05-19 [Link].077 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28100 hint:-1
pid:918 duration:0 => ret_hdl:28100
05-19 [Link].077 479 1594 I libPowerHal: [PE] scn:1 hdl:28100
lock_user:[email protected] pid:918 tid:9823 dur:0
05-19 [Link].099 918 9817 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].099 918 9817 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].099 918 9817 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].099 918 9817 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].099 918 9817 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].483 918 9773 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].495 918 9773 I mtkpower_client: perf_lock_rel, hdl:28096,
tid:9773
05-19 [Link].496 918 9773 I mtkpower_client: perf_lock_rel, hdl:28095,
tid:9773
05-19 [Link].496 479 1594 I libPowerHal: [PD] scn:3 hdl:28096
lock_user:[email protected] pid:918 tid:9778 dur:0
05-19 [Link].580 918 9822 I mtkpower_client: perf_lock_rel, hdl:28100,
tid:9822
05-19 [Link].580 918 9822 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9822
05-19 [Link].581 479 1594 I libPowerHal: [PD] scn:1 hdl:28100
lock_user:[email protected] pid:918 tid:9823 dur:0
05-19 [Link].582 918 9822 I mtkpower_client: ret_hdl:28103
05-19 [Link].582 918 9822 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9822
05-19 [Link].582 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28103 hint:-1
pid:918 duration:0 => ret_hdl:28103
05-19 [Link].582 479 1594 I libPowerHal: [PE] scn:2 hdl:28103
lock_user:[email protected] pid:918 tid:9822 dur:0
05-19 [Link].583 918 9822 I mtkpower_client: ret_hdl:28104
05-19 [Link].583 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28104 hint:-1
pid:918 duration:0 => ret_hdl:28104
05-19 [Link].583 479 1594 I libPowerHal: [PE] scn:1 hdl:28104
lock_user:[email protected] pid:918 tid:9822 dur:0
05-19 [Link].666 918 9822 I mtkpower_client: perf_lock_rel, hdl:28104,
tid:9822
05-19 [Link].667 479 1594 I libPowerHal: [PD] scn:1 hdl:28104
lock_user:[email protected] pid:918 tid:9822 dur:0
05-19 [Link].173 918 15680 E OMXNodeInstance:
setParameter(0xea2e1004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].174 918 15680 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].176 918 15680 E MtkOmxVdecEx: [0xea2e1000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].176 918 15680 E OMXNodeInstance:
setConfig(0xea2e1004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].177 918 15538 E OMXNodeInstance:
getParameter(0xea2e1004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].177 918 15538 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].178 918 15538 E OMXNodeInstance:
getConfig(0xea2e1004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].212 918 9868 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].212 918 9868 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].212 918 9868 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].213 918 9868 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].213 918 9868 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 36758
05-19 [Link].213 918 9868 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].213 918 9868 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].216 918 9875 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9875
05-19 [Link].217 918 9875 I mtkpower_client: ret_hdl:28110
05-19 [Link].217 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28110 hint:-1
pid:918 duration:0 => ret_hdl:28110
05-19 [Link].217 479 1594 I libPowerHal: [PE] scn:3 hdl:28110
lock_user:[email protected] pid:918 tid:9875 dur:0
05-19 [Link].227 918 9868 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].227 918 9868 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].227 918 9868 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].227 918 9868 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].227 918 9868 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].486 918 9816 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].486 918 9873 I mtkpower_client: perf_lock_rel, hdl:28110,
tid:9873
05-19 [Link].486 918 9873 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9873
05-19 [Link].487 479 1594 I libPowerHal: [PD] scn:3 hdl:28110
lock_user:[email protected] pid:918 tid:9875 dur:0
05-19 [Link].489 918 9873 I mtkpower_client: ret_hdl:28111
05-19 [Link].489 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28111 hint:-1
pid:918 duration:0 => ret_hdl:28111
05-19 [Link].489 479 1594 I libPowerHal: [PE] scn:1 hdl:28111
lock_user:[email protected] pid:918 tid:9873 dur:0
05-19 [Link].495 918 9816 I mtkpower_client: perf_lock_rel, hdl:28104,
tid:9816
05-19 [Link].496 918 9816 I mtkpower_client: perf_lock_rel, hdl:28103,
tid:9816
05-19 [Link].497 918 9816 I mtkpower_client: perf_lock_rel, hdl:28100,
tid:9816
05-19 [Link].498 479 1594 I libPowerHal: [PD] scn:2 hdl:28103
lock_user:[email protected] pid:918 tid:9822 dur:0
05-19 [Link].327 918 1784 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].327 918 1721 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].331 918 1784 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].331 918 1784 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].332 918 1064 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].332 918 1784 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].332 918 1721 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].373 918 9921 E VDO_LOG : GetDecoderAPI hWrapper 0xea0bf810
05-19 [Link].373 918 9921 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].373 918 9921 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].374 918 9921 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].374 918 9921 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 38193
05-19 [Link].374 918 9921 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe21f5000
05-19 [Link].374 918 9921 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].397 918 9931 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9931
05-19 [Link].398 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28117 hint:-1
pid:918 duration:0 => ret_hdl:28117
05-19 [Link].398 479 1594 I libPowerHal: [PE] scn:2 hdl:28117
lock_user:[email protected] pid:918 tid:9931 dur:0
05-19 [Link].399 918 9931 I mtkpower_client: ret_hdl:28117
05-19 [Link].410 918 9921 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].410 918 9921 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].410 918 9921 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].410 918 9921 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].410 918 9921 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].442 918 9873 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9873
05-19 [Link].443 918 9873 I mtkpower_client: ret_hdl:28118
05-19 [Link].443 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28118 hint:-1
pid:918 duration:0 => ret_hdl:28118
05-19 [Link].443 479 1594 I libPowerHal: [PE] scn:3 hdl:28118
lock_user:[email protected] pid:918 tid:9873 dur:0
05-19 [Link].556 918 9867 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].576 918 9867 I mtkpower_client: perf_lock_rel, hdl:28118,
tid:9867
05-19 [Link].577 479 1594 I libPowerHal: [PD] scn:3 hdl:28118
lock_user:[email protected] pid:918 tid:9873 dur:0
05-19 [Link].580 918 9867 I mtkpower_client: perf_lock_rel, hdl:28111,
tid:9867
05-19 [Link].580 918 9867 I mtkpower_client: perf_lock_rel, hdl:28110,
tid:9867
05-19 [Link].581 479 1594 I libPowerHal: [PD] scn:1 hdl:28111
lock_user:[email protected] pid:918 tid:9873 dur:0
05-19 [Link].757 918 9930 I mtkpower_client: perf_lock_rel, hdl:28117,
tid:9930
05-19 [Link].757 918 9930 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9930
05-19 [Link].758 479 1594 I libPowerHal: [PD] scn:2 hdl:28117
lock_user:[email protected] pid:918 tid:9931 dur:0
05-19 [Link].759 918 9930 I mtkpower_client: ret_hdl:28119
05-19 [Link].759 918 9930 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9930
05-19 [Link].759 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28119 hint:-1
pid:918 duration:0 => ret_hdl:28119
05-19 [Link].759 479 1594 I libPowerHal: [PE] scn:1 hdl:28119
lock_user:[email protected] pid:918 tid:9930 dur:0
05-19 [Link].759 918 9930 I mtkpower_client: ret_hdl:28120
05-19 [Link].760 918 9930 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9930
05-19 [Link].760 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28120 hint:-1
pid:918 duration:0 => ret_hdl:28120
05-19 [Link].760 479 1594 I libPowerHal: [PE] scn:2 hdl:28120
lock_user:[email protected] pid:918 tid:9930 dur:0
05-19 [Link].760 918 9930 I mtkpower_client: ret_hdl:28121
05-19 [Link].760 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28121 hint:-1
pid:918 duration:0 => ret_hdl:28121
05-19 [Link].760 479 1594 I libPowerHal: [PE] scn:3 hdl:28121
lock_user:[email protected] pid:918 tid:9930 dur:0
05-19 [Link].821 918 9930 I mtkpower_client: perf_lock_rel, hdl:28121,
tid:9930
05-19 [Link].822 479 1594 I libPowerHal: [PD] scn:3 hdl:28121
lock_user:[email protected] pid:918 tid:9930 dur:0
05-19 [Link].963 918 9930 I mtkpower_client: perf_lock_rel, hdl:28120,
tid:9930
05-19 [Link].964 479 1594 I libPowerHal: [PD] scn:2 hdl:28120
lock_user:[email protected] pid:918 tid:9930 dur:0
05-19 [Link].213 918 1064 E OMXNodeInstance:
setParameter(0xea2e2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].214 918 1064 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].219 918 5058 E MtkOmxVdecEx: [0xea2e2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].219 918 5058 E OMXNodeInstance:
setConfig(0xea2e2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].220 918 5058 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].220 918 5058 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].221 918 5058 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].260 918 9970 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].260 918 9970 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].260 918 9970 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].261 918 9970 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].261 918 9970 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14684
05-19 [Link].261 918 9970 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2f60000
05-19 [Link].261 918 9970 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].269 918 9976 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9976
05-19 [Link].271 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28125 hint:-1
pid:918 duration:0 => ret_hdl:28125
05-19 [Link].271 918 9976 I mtkpower_client: ret_hdl:28125
05-19 [Link].271 479 1594 I libPowerHal: [PE] scn:0 hdl:28125
lock_user:[email protected] pid:918 tid:9976 dur:0
05-19 [Link].293 918 9970 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].293 918 9970 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].293 918 9970 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].293 918 9970 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].293 918 9970 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].676 918 9920 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].698 918 9920 I mtkpower_client: perf_lock_rel, hdl:28121,
tid:9920
05-19 [Link].698 918 9920 I mtkpower_client: perf_lock_rel, hdl:28120,
tid:9920
05-19 [Link].699 918 9920 I mtkpower_client: perf_lock_rel, hdl:28119,
tid:9920
05-19 [Link].699 918 9920 I mtkpower_client: perf_lock_rel, hdl:28117,
tid:9920
05-19 [Link].701 479 1594 I libPowerHal: [PD] scn:1 hdl:28119
lock_user:[email protected] pid:918 tid:9930 dur:0
05-19 [Link].716 918 9975 I mtkpower_client: perf_lock_rel, hdl:28125,
tid:9975
05-19 [Link].716 918 9975 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:9975
05-19 [Link].717 479 1594 I libPowerHal: [PD] scn:0 hdl:28125
lock_user:[email protected] pid:918 tid:9976 dur:0
05-19 [Link].718 918 9975 I mtkpower_client: ret_hdl:28127
05-19 [Link].718 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28127 hint:-1
pid:918 duration:0 => ret_hdl:28127
05-19 [Link].718 479 1594 I libPowerHal: [PE] scn:1 hdl:28127
lock_user:[email protected] pid:918 tid:9975 dur:0
05-19 [Link].918 507 1178 E _V_FeatureManager: erro!!,gFeatureNotifyCallback =
NULL
05-19 [Link].151 918 1064 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].151 918 1064 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].156 918 1064 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].156 918 1064 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].157 918 11990 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].157 918 11990 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].158 918 11990 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].198 918 10015 E VDO_LOG : GetDecoderAPI hWrapper 0xe9f62810
05-19 [Link].199 918 10015 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].199 918 10015 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].206 918 10015 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].206 918 10015 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 38193
05-19 [Link].206 918 10015 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe22f6000
05-19 [Link].207 918 10015 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].209 918 10022 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10022
05-19 [Link].210 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28133 hint:-1
pid:918 duration:0 => ret_hdl:28133
05-19 [Link].210 479 1594 I libPowerHal: [PE] scn:3 hdl:28133
lock_user:[email protected] pid:918 tid:10022 dur:0
05-19 [Link].211 918 10022 I mtkpower_client: ret_hdl:28133
05-19 [Link].223 918 10015 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].223 918 10015 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].223 918 10015 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].223 918 10015 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].223 918 10015 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].458 918 9969 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].474 918 9969 I mtkpower_client: perf_lock_rel, hdl:28127,
tid:9969
05-19 [Link].475 918 9969 I mtkpower_client: perf_lock_rel, hdl:28125,
tid:9969
05-19 [Link].475 479 1594 I libPowerHal: [PD] scn:1 hdl:28127
lock_user:[email protected] pid:918 tid:9975 dur:0
05-19 [Link].491 918 10021 I mtkpower_client: perf_lock_rel, hdl:28133,
tid:10021
05-19 [Link].492 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].495 479 1594 I libPowerHal: [PD] scn:3 hdl:28133
lock_user:[email protected] pid:918 tid:10022 dur:0
05-19 [Link].496 918 10021 I mtkpower_client: ret_hdl:28134
05-19 [Link].497 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28134 hint:-1
pid:918 duration:0 => ret_hdl:28134
05-19 [Link].497 479 1594 I libPowerHal: [PE] scn:1 hdl:28134
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].557 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].558 918 10021 I mtkpower_client: ret_hdl:28135
05-19 [Link].559 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28135 hint:-1
pid:918 duration:0 => ret_hdl:28135
05-19 [Link].559 479 1594 I libPowerHal: [PE] scn:2 hdl:28135
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].733 918 10021 I mtkpower_client: perf_lock_rel, hdl:28135,
tid:10021
05-19 [Link].735 479 1594 I libPowerHal: [PD] scn:2 hdl:28135
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].295 918 1064 E OMXNodeInstance:
setParameter(0xea2e2804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].296 918 1064 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].298 918 1064 E MtkOmxVdecEx: [0xea2e2800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].298 918 1064 E OMXNodeInstance:
setConfig(0xea2e2804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].299 918 1064 E OMXNodeInstance:
getParameter(0xea2e2804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].299 918 1064 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].300 918 1064 E OMXNodeInstance:
getConfig(0xea2e2804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].380 918 10060 E VDO_LOG : GetDecoderAPI hWrapper 0xea01f810
05-19 [Link].381 918 10060 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].381 918 10060 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].381 918 10060 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].381 918 10060 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14684
05-19 [Link].381 918 10060 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe2df7000
05-19 [Link].381 918 10060 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].390 918 10066 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10066
05-19 [Link].392 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28139 hint:-1
pid:918 duration:0 => ret_hdl:28139
05-19 [Link].392 479 1594 I libPowerHal: [PE] scn:2 hdl:28139
lock_user:[email protected] pid:918 tid:10066 dur:0
05-19 [Link].393 918 10066 I mtkpower_client: ret_hdl:28139
05-19 [Link].433 918 10060 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].433 918 10060 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].434 918 10060 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].434 918 10060 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].434 918 10060 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].745 918 10059 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].755 918 10059 I mtkpower_client: perf_lock_rel, hdl:28139,
tid:10059
05-19 [Link].756 479 1594 I libPowerHal: [PD] scn:2 hdl:28139
lock_user:[email protected] pid:918 tid:10066 dur:0
05-19 [Link].339 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].341 918 10021 I mtkpower_client: ret_hdl:28141
05-19 [Link].341 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28141 hint:-1
pid:918 duration:0 => ret_hdl:28141
05-19 [Link].341 479 1594 I libPowerHal: [PE] scn:0 hdl:28141
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].414 918 10021 I mtkpower_client: perf_lock_rel, hdl:28141,
tid:10021
05-19 [Link].414 479 1594 I libPowerHal: [PD] scn:0 hdl:28141
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].264 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].266 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28142 hint:-1
pid:918 duration:0 => ret_hdl:28142
05-19 [Link].266 479 1594 I libPowerHal: [PE] scn:0 hdl:28142
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].267 918 10021 I mtkpower_client: ret_hdl:28142
05-19 [Link].331 918 10021 I mtkpower_client: perf_lock_rel, hdl:28142,
tid:10021
05-19 [Link].332 479 1594 I libPowerHal: [PD] scn:0 hdl:28142
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].223 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].224 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28143 hint:-1
pid:918 duration:0 => ret_hdl:28143
05-19 [Link].225 479 1594 I libPowerHal: [PE] scn:0 hdl:28143
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].225 918 10021 I mtkpower_client: ret_hdl:28143
05-19 [Link].425 918 10021 I mtkpower_client: perf_lock_rel, hdl:28143,
tid:10021
05-19 [Link].426 479 1594 I libPowerHal: [PD] scn:0 hdl:28143
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].403 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].404 918 10021 I mtkpower_client: ret_hdl:28144
05-19 [Link].406 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28144 hint:-1
pid:918 duration:0 => ret_hdl:28144
05-19 [Link].406 479 1594 I libPowerHal: [PE] scn:0 hdl:28144
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].511 918 10021 I mtkpower_client: perf_lock_rel, hdl:28144,
tid:10021
05-19 [Link].512 479 1594 I libPowerHal: [PD] scn:0 hdl:28144
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].431 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].432 918 10021 I mtkpower_client: ret_hdl:28145
05-19 [Link].433 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28145 hint:-1
pid:918 duration:0 => ret_hdl:28145
05-19 [Link].433 479 1594 I libPowerHal: [PE] scn:0 hdl:28145
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].525 918 10021 I mtkpower_client: perf_lock_rel, hdl:28145,
tid:10021
05-19 [Link].526 479 1594 I libPowerHal: [PD] scn:0 hdl:28145
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].833 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].834 918 10021 I mtkpower_client: ret_hdl:28146
05-19 [Link].835 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28146 hint:-1
pid:918 duration:0 => ret_hdl:28146
05-19 [Link].835 479 1594 I libPowerHal: [PE] scn:0 hdl:28146
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].921 918 10021 I mtkpower_client: perf_lock_rel, hdl:28146,
tid:10021
05-19 [Link].922 479 1594 I libPowerHal: [PD] scn:0 hdl:28146
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].596 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].598 918 10021 I mtkpower_client: ret_hdl:28147
05-19 [Link].600 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28147 hint:-1
pid:918 duration:0 => ret_hdl:28147
05-19 [Link].601 479 1594 I libPowerHal: [PE] scn:0 hdl:28147
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].758 918 10021 I mtkpower_client: perf_lock_rel, hdl:28147,
tid:10021
05-19 [Link].760 479 1594 I libPowerHal: [PD] scn:0 hdl:28147
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].848 479 1594 I libPowerHal: [perfScnDumpAll] scn:1 hdl:28134
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].472 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].473 918 10021 I mtkpower_client: ret_hdl:28148
05-19 [Link].476 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28148 hint:-1
pid:918 duration:0 => ret_hdl:28148
05-19 [Link].476 479 1594 I libPowerHal: [PE] scn:0 hdl:28148
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].562 918 10021 I mtkpower_client: perf_lock_rel, hdl:28148,
tid:10021
05-19 [Link].563 479 1594 I libPowerHal: [PD] scn:0 hdl:28148
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].133 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].134 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28149 hint:-1
pid:918 duration:0 => ret_hdl:28149
05-19 [Link].134 479 1594 I libPowerHal: [PE] scn:0 hdl:28149
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].134 918 10021 I mtkpower_client: ret_hdl:28149
05-19 [Link].212 918 10021 I mtkpower_client: perf_lock_rel, hdl:28149,
tid:10021
05-19 [Link].213 479 1594 I libPowerHal: [PD] scn:0 hdl:28149
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].676 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].677 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28150 hint:-1
pid:918 duration:0 => ret_hdl:28150
05-19 [Link].678 479 1594 I libPowerHal: [PE] scn:0 hdl:28150
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].678 918 10021 I mtkpower_client: ret_hdl:28150
05-19 [Link].903 918 10021 I mtkpower_client: perf_lock_rel, hdl:28150,
tid:10021
05-19 [Link].904 479 1594 I libPowerHal: [PD] scn:0 hdl:28150
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].943 918 10021 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10021
05-19 [Link].945 918 10021 I mtkpower_client: ret_hdl:28151
05-19 [Link].945 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28151 hint:-1
pid:918 duration:0 => ret_hdl:28151
05-19 [Link].945 479 1594 I libPowerHal: [PE] scn:0 hdl:28151
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].043 918 10021 I mtkpower_client: perf_lock_rel, hdl:28151,
tid:10021
05-19 [Link].044 479 1594 I libPowerHal: [PD] scn:0 hdl:28151
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].304 918 1064 E OMXNodeInstance:
setParameter(0xea09d004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].306 918 1064 E OMXNodeInstance:
getParameter(0xea09d004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].311 918 1064 E MtkOmxVdecEx: [0xea09d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].312 918 1064 E OMXNodeInstance:
setConfig(0xea09d004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].313 918 1064 E OMXNodeInstance:
getParameter(0xea09d004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].314 918 1064 E OMXNodeInstance:
getConfig(0xea09d004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].315 918 1064 E OMXNodeInstance:
getConfig(0xea09d004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].365 918 10111 E VDO_LOG : GetDecoderAPI hWrapper 0xe9e47810
05-19 [Link].365 918 10111 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].365 918 10111 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].366 918 10111 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].366 918 10111 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 14684
05-19 [Link].366 918 10111 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe29ef000
05-19 [Link].366 918 10111 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].380 918 10116 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10116
05-19 [Link].381 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28157 hint:-1
pid:918 duration:0 => ret_hdl:28157
05-19 [Link].381 479 1594 I libPowerHal: [PE] scn:0 hdl:28157
lock_user:[email protected] pid:918 tid:10116 dur:0
05-19 [Link].381 918 10116 I mtkpower_client: ret_hdl:28157
05-19 [Link].391 918 10111 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].392 918 10111 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].392 918 10111 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].392 918 10111 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].392 918 10111 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].625 918 10014 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].641 918 10014 I mtkpower_client: perf_lock_rel, hdl:28151,
tid:10014
05-19 [Link].642 918 10115 I mtkpower_client: perf_lock_rel, hdl:28157,
tid:10115
05-19 [Link].650 918 10014 I mtkpower_client: perf_lock_rel, hdl:28134,
tid:10014
05-19 [Link].651 918 10014 I mtkpower_client: perf_lock_rel, hdl:28133,
tid:10014
05-19 [Link].652 918 10115 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10115
05-19 [Link].653 479 1594 I libPowerHal: [PD] scn:1 hdl:28134
lock_user:[email protected] pid:918 tid:10021 dur:0
05-19 [Link].654 918 10115 I mtkpower_client: ret_hdl:28158
05-19 [Link].658 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28158 hint:-1
pid:918 duration:0 => ret_hdl:28158
05-19 [Link].658 479 1594 I libPowerHal: [PE] scn:2 hdl:28158
lock_user:[email protected] pid:918 tid:10115 dur:0
05-19 [Link].662 479 1594 I libPowerHal: [PD] scn:0 hdl:28157
lock_user:[email protected] pid:918 tid:10116 dur:0
05-19 [Link].432 918 10110 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].442 918 10110 I mtkpower_client: perf_lock_rel, hdl:28158,
tid:10110
05-19 [Link].442 918 10110 I mtkpower_client: perf_lock_rel, hdl:28157,
tid:10110
05-19 [Link].443 479 1594 I libPowerHal: [PD] scn:2 hdl:28158
lock_user:[email protected] pid:918 tid:10115 dur:0
05-19 [Link].449 918 10110 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].449 918 10110 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].449 918 10110 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].449 918 10110 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].036 918 11990 E OMXNodeInstance:
setParameter(0xea156004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].036 918 11990 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].041 918 1065 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].041 918 1065 E OMXNodeInstance:
setConfig(0xea156004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].042 918 1065 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].042 918 13399 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].043 918 1065 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].080 918 10162 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].080 918 10162 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].081 918 10162 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].081 918 10162 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].081 918 10162 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].089 918 10162 E VDO_LOG : GetDecoderAPI hWrapper 0xea14a810
05-19 [Link].090 918 10162 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].090 918 10162 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].260 918 10162 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].260 918 10162 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 11016
05-19 [Link].261 918 10162 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].261 918 10162 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].264 918 10172 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10172
05-19 [Link].265 918 10172 I mtkpower_client: ret_hdl:28169
05-19 [Link].265 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28169 hint:-1
pid:918 duration:0 => ret_hdl:28169
05-19 [Link].266 479 1594 I libPowerHal: [PE] scn:0 hdl:28169
lock_user:[email protected] pid:918 tid:10172 dur:0
05-19 [Link].268 918 10162 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].268 918 10162 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].268 918 10162 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].269 918 10162 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].269 918 10162 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].507 918 10170 I mtkpower_client: perf_lock_rel, hdl:28169,
tid:10170
05-19 [Link].507 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].508 479 1594 I libPowerHal: [PD] scn:0 hdl:28169
lock_user:[email protected] pid:918 tid:10172 dur:0
05-19 [Link].509 918 10170 I mtkpower_client: ret_hdl:28170
05-19 [Link].509 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].510 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28170 hint:-1
pid:918 duration:0 => ret_hdl:28170
05-19 [Link].510 479 1594 I libPowerHal: [PE] scn:2 hdl:28170
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].510 918 10170 I mtkpower_client: ret_hdl:28171
05-19 [Link].511 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28171 hint:-1
pid:918 duration:0 => ret_hdl:28171
05-19 [Link].511 479 1594 I libPowerHal: [PE] scn:0 hdl:28171
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].577 918 10170 I mtkpower_client: perf_lock_rel, hdl:28171,
tid:10170
05-19 [Link].578 479 1594 I libPowerHal: [PD] scn:0 hdl:28171
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].297 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].298 918 10170 I mtkpower_client: ret_hdl:28172
05-19 [Link].298 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28172 hint:-1
pid:918 duration:0 => ret_hdl:28172
05-19 [Link].298 479 1594 I libPowerHal: [PE] scn:0 hdl:28172
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].378 918 10170 I mtkpower_client: perf_lock_rel, hdl:28172,
tid:10170
05-19 [Link].380 479 1594 I libPowerHal: [PD] scn:0 hdl:28172
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].078 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].080 918 10170 I mtkpower_client: ret_hdl:28173
05-19 [Link].080 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28173 hint:-1
pid:918 duration:0 => ret_hdl:28173
05-19 [Link].080 479 1594 I libPowerHal: [PE] scn:0 hdl:28173
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].477 918 10170 I mtkpower_client: perf_lock_rel, hdl:28173,
tid:10170
05-19 [Link].478 479 1594 I libPowerHal: [PD] scn:0 hdl:28173
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].074 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].074 918 10170 I mtkpower_client: ret_hdl:28174
05-19 [Link].075 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28174 hint:-1
pid:918 duration:0 => ret_hdl:28174
05-19 [Link].075 479 1594 I libPowerHal: [PE] scn:0 hdl:28174
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].171 918 10170 I mtkpower_client: perf_lock_rel, hdl:28174,
tid:10170
05-19 [Link].172 479 1594 I libPowerHal: [PD] scn:0 hdl:28174
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].358 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].360 918 10170 I mtkpower_client: ret_hdl:28175
05-19 [Link].360 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28175 hint:-1
pid:918 duration:0 => ret_hdl:28175
05-19 [Link].360 479 1594 I libPowerHal: [PE] scn:0 hdl:28175
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].484 918 10170 I mtkpower_client: perf_lock_rel, hdl:28175,
tid:10170
05-19 [Link].485 479 1594 I libPowerHal: [PD] scn:0 hdl:28175
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].825 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].827 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28176 hint:-1
pid:918 duration:0 => ret_hdl:28176
05-19 [Link].827 479 1594 I libPowerHal: [PE] scn:0 hdl:28176
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].827 918 10170 I mtkpower_client: ret_hdl:28176
05-19 [Link].923 918 10170 I mtkpower_client: perf_lock_rel, hdl:28176,
tid:10170
05-19 [Link].924 479 1594 I libPowerHal: [PD] scn:0 hdl:28176
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].076 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].096 918 10170 I mtkpower_client: ret_hdl:28177
05-19 [Link].097 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28177 hint:-1
pid:918 duration:0 => ret_hdl:28177
05-19 [Link].097 479 1594 I libPowerHal: [PE] scn:0 hdl:28177
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].366 918 10170 I mtkpower_client: perf_lock_rel, hdl:28177,
tid:10170
05-19 [Link].367 479 1594 I libPowerHal: [PD] scn:0 hdl:28177
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].354 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].357 918 10170 I mtkpower_client: ret_hdl:28178
05-19 [Link].357 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28178 hint:-1
pid:918 duration:0 => ret_hdl:28178
05-19 [Link].358 479 1594 I libPowerHal: [PE] scn:0 hdl:28178
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].435 918 10170 I mtkpower_client: perf_lock_rel, hdl:28178,
tid:10170
05-19 [Link].437 479 1594 I libPowerHal: [PD] scn:0 hdl:28178
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].153 918 10170 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10170
05-19 [Link].155 918 10170 I mtkpower_client: ret_hdl:28179
05-19 [Link].155 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28179 hint:-1
pid:918 duration:0 => ret_hdl:28179
05-19 [Link].155 479 1594 I libPowerHal: [PE] scn:0 hdl:28179
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].389 918 10170 I mtkpower_client: perf_lock_rel, hdl:28179,
tid:10170
05-19 [Link].390 479 1594 I libPowerHal: [PD] scn:0 hdl:28179
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].454 918 10161 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].472 918 10161 I mtkpower_client: perf_lock_rel, hdl:28179,
tid:10161
05-19 [Link].472 918 10161 I mtkpower_client: perf_lock_rel, hdl:28170,
tid:10161
05-19 [Link].473 918 10161 I mtkpower_client: perf_lock_rel, hdl:28169,
tid:10161
05-19 [Link].474 479 1594 I libPowerHal: [PD] scn:2 hdl:28170
lock_user:[email protected] pid:918 tid:10170 dur:0
05-19 [Link].474 918 10161 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].476 918 10161 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].477 918 10161 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].477 918 10161 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].924 918 13399 E OMXNodeInstance:
setParameter(0xea156004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].924 918 11990 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].929 918 11716 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].929 918 11716 E OMXNodeInstance:
setConfig(0xea156004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].931 918 1780 E OMXNodeInstance:
getParameter(0xea156004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].931 918 13399 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].933 918 13399 E OMXNodeInstance:
getConfig(0xea156004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].980 918 10528 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].981 918 10528 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].985 918 10528 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].986 918 10528 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].986 918 10528 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].987 918 10528 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].987 918 10528 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].987 918 10528 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].093 918 10528 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].093 918 10528 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 49159
05-19 [Link].093 918 10528 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].093 918 10528 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
960, Offset 0, Padding 0
05-19 [Link].095 918 10536 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10536
05-19 [Link].095 918 10536 I mtkpower_client: ret_hdl:28182
05-19 [Link].096 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28182 hint:-1
pid:918 duration:0 => ret_hdl:28182
05-19 [Link].096 479 1594 I libPowerHal: [PE] scn:0 hdl:28182
lock_user:[email protected] pid:918 tid:10536 dur:0
05-19 [Link].099 918 10528 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].099 918 10528 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].099 918 10528 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].099 918 10528 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].099 918 10528 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].282 918 10535 I mtkpower_client: perf_lock_rel, hdl:28182,
tid:10535
05-19 [Link].282 918 10535 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10535
05-19 [Link].283 479 1594 I libPowerHal: [PD] scn:0 hdl:28182
lock_user:[email protected] pid:918 tid:10536 dur:0
05-19 [Link].284 918 10535 I mtkpower_client: ret_hdl:28184
05-19 [Link].284 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28184 hint:-1
pid:918 duration:0 => ret_hdl:28184
05-19 [Link].285 479 1594 I libPowerHal: [PE] scn:2 hdl:28184
lock_user:[email protected] pid:918 tid:10535 dur:0
05-19 [Link].020 918 10527 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].028 918 10527 I mtkpower_client: perf_lock_rel, hdl:28184,
tid:10527
05-19 [Link].029 918 10527 I mtkpower_client: perf_lock_rel, hdl:28182,
tid:10527
05-19 [Link].030 479 1594 I libPowerHal: [PD] scn:2 hdl:28184
lock_user:[email protected] pid:918 tid:10535 dur:0
05-19 [Link].031 918 10527 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].032 918 10527 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].032 918 10527 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].032 918 10527 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].882 918 1064 E OMXNodeInstance:
setParameter(0xe9d89804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].882 918 1064 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].885 918 1064 E MtkOmxVdecEx: [0xe9d89800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].886 918 1064 E OMXNodeInstance:
setConfig(0xe9d89804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].886 918 1064 E OMXNodeInstance:
getParameter(0xe9d89804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].886 918 1065 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].887 918 1064 E OMXNodeInstance:
getConfig(0xe9d89804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].919 918 10593 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].919 918 10593 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].920 918 10593 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].920 918 10593 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].920 918 10593 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].921 918 10593 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].921 918 10593 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].921 918 10593 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].924 918 10593 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].924 918 10593 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 45504
05-19 [Link].924 918 10593 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].924 918 10593 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].929 918 10599 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10599
05-19 [Link].929 918 10599 I mtkpower_client: ret_hdl:28201
05-19 [Link].930 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28201 hint:-1
pid:918 duration:0 => ret_hdl:28201
05-19 [Link].930 479 1594 I libPowerHal: [PE] scn:0 hdl:28201
lock_user:[email protected] pid:918 tid:10599 dur:0
05-19 [Link].934 918 10593 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].934 918 10593 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].934 918 10593 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].934 918 10593 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].935 918 10593 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].798 918 10598 I mtkpower_client: perf_lock_rel, hdl:28201,
tid:10598
05-19 [Link].798 918 10598 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10598
05-19 [Link].799 479 1594 I libPowerHal: [PD] scn:0 hdl:28201
lock_user:[email protected] pid:918 tid:10599 dur:0
05-19 [Link].800 918 10598 I mtkpower_client: ret_hdl:28202
05-19 [Link].800 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28202 hint:-1
pid:918 duration:0 => ret_hdl:28202
05-19 [Link].800 479 1594 I libPowerHal: [PE] scn:1 hdl:28202
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].822 918 1064 E OMXNodeInstance:
setParameter(0xea156004:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].823 918 1064 E OMXNodeInstance:
getParameter(0xea156004:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].827 918 1064 E MtkOmxVdecEx: [0xea156000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].827 918 1064 E OMXNodeInstance:
setConfig(0xea156004:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].829 918 1064 E OMXNodeInstance:
getConfig(0xea156004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].830 918 1064 E OMXNodeInstance:
getConfig(0xea156004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].977 918 10640 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].796 918 10598 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10598
05-19 [Link].802 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28203 hint:-1
pid:918 duration:0 => ret_hdl:28203
05-19 [Link].802 479 1594 I libPowerHal: [PE] scn:0 hdl:28203
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].803 918 10598 I mtkpower_client: ret_hdl:28203
05-19 [Link].869 918 1064 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].869 918 1064 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].874 918 6021 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].874 918 6021 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].875 918 6021 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].875 918 6021 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].876 918 6021 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].895 918 10598 I mtkpower_client: perf_lock_rel, hdl:28203,
tid:10598
05-19 [Link].896 479 1594 I libPowerHal: [PD] scn:0 hdl:28203
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].949 918 10653 E VDO_LOG : GetDecoderAPI hWrapper 0xe9bbc810
05-19 [Link].949 918 10653 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].949 918 10653 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].950 918 10653 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].951 918 10653 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 46440
05-19 [Link].951 918 10653 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xda876000
05-19 [Link].951 918 10653 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].980 918 10659 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10659
05-19 [Link].981 918 10659 I mtkpower_client: ret_hdl:28204
05-19 [Link].981 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28204 hint:-1
pid:918 duration:0 => ret_hdl:28204
05-19 [Link].981 479 1594 I libPowerHal: [PE] scn:0 hdl:28204
lock_user:[email protected] pid:918 tid:10659 dur:0
05-19 [Link].031 918 10653 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].031 918 10653 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].031 918 10653 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].031 918 10653 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].031 918 10653 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].163 918 10598 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10598
05-19 [Link].165 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28205 hint:-1
pid:918 duration:0 => ret_hdl:28205
05-19 [Link].165 479 1594 I libPowerHal: [PE] scn:2 hdl:28205
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].174 918 10598 I mtkpower_client: ret_hdl:28205
05-19 [Link].174 918 10598 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10598
05-19 [Link].177 918 10598 I mtkpower_client: ret_hdl:28206
05-19 [Link].179 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28206 hint:-1
pid:918 duration:0 => ret_hdl:28206
05-19 [Link].179 479 1594 I libPowerHal: [PE] scn:3 hdl:28206
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].372 918 10598 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10598
05-19 [Link].373 918 10598 I mtkpower_client: ret_hdl:28207
05-19 [Link].373 918 10598 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10598
05-19 [Link].374 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:28207 hint:-1
pid:918 duration:0 => ret_hdl:28207
05-19 [Link].374 479 1594 I libPowerHal: [PE] scn:4 hdl:28207
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].376 918 10598 I mtkpower_client: ret_hdl:28208
05-19 [Link].376 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:28208 hint:-1
pid:918 duration:0 => ret_hdl:28208
05-19 [Link].376 479 1594 I libPowerHal: [PE] scn:5 hdl:28208
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].600 918 10598 I mtkpower_client: perf_lock_rel, hdl:28208,
tid:10598
05-19 [Link].600 479 1594 I libPowerHal: [PD] scn:5 hdl:28208
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].668 918 10598 I mtkpower_client: perf_lock_rel, hdl:28207,
tid:10598
05-19 [Link].669 918 10598 I mtkpower_client: perf_lock_rel, hdl:28206,
tid:10598
05-19 [Link].670 479 1594 I libPowerHal: [PD] scn:4 hdl:28207
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].671 479 1594 I libPowerHal: [PD] scn:3 hdl:28206
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].951 918 10598 I mtkpower_client: perf_lock_rel, hdl:28205,
tid:10598
05-19 [Link].952 479 1594 I libPowerHal: [PD] scn:2 hdl:28205
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].276 918 10657 I mtkpower_client: perf_lock_rel, hdl:28204,
tid:10657
05-19 [Link].277 918 10657 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10657
05-19 [Link].278 479 1594 I libPowerHal: [PD] scn:0 hdl:28204
lock_user:[email protected] pid:918 tid:10659 dur:0
05-19 [Link].278 918 10657 I mtkpower_client: ret_hdl:28209
05-19 [Link].278 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28209 hint:-1
pid:918 duration:0 => ret_hdl:28209
05-19 [Link].279 479 1594 I libPowerHal: [PE] scn:2 hdl:28209
lock_user:[email protected] pid:918 tid:10657 dur:0
05-19 [Link].574 918 10592 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].602 918 10592 I mtkpower_client: perf_lock_rel, hdl:28208,
tid:10592
05-19 [Link].602 918 10592 I mtkpower_client: perf_lock_rel, hdl:28207,
tid:10592
05-19 [Link].603 918 10592 I mtkpower_client: perf_lock_rel, hdl:28206,
tid:10592
05-19 [Link].603 918 10592 I mtkpower_client: perf_lock_rel, hdl:28205,
tid:10592
05-19 [Link].603 918 10592 I mtkpower_client: perf_lock_rel, hdl:28202,
tid:10592
05-19 [Link].604 918 10592 I mtkpower_client: perf_lock_rel, hdl:28201,
tid:10592
05-19 [Link].609 479 1594 I libPowerHal: [PD] scn:1 hdl:28202
lock_user:[email protected] pid:918 tid:10598 dur:0
05-19 [Link].695 918 10652 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].704 918 10652 I mtkpower_client: perf_lock_rel, hdl:28209,
tid:10652
05-19 [Link].704 918 10652 I mtkpower_client: perf_lock_rel, hdl:28204,
tid:10652
05-19 [Link].705 479 1594 I libPowerHal: [PD] scn:2 hdl:28209
lock_user:[email protected] pid:918 tid:10657 dur:0
05-19 [Link].706 918 10652 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].708 918 10652 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].708 918 10652 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].708 918 10652 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].713 918 5058 E OMXNodeInstance:
setParameter(0xea285804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].713 918 15680 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].729 918 1088 E MtkOmxVdecEx: [0xea285800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].730 918 1088 E OMXNodeInstance:
setConfig(0xea285804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].735 918 13399 E OMXNodeInstance:
getParameter(0xea285804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].736 918 13399 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].738 918 13399 E OMXNodeInstance:
getConfig(0xea285804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].758 918 1088 E OMXNodeInstance:
setParameter(0xea09d004:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].758 918 13399 E OMXNodeInstance:
getParameter(0xea09d004:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].761 918 1064 E MtkOmxVdecEx: [0xea09d000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].761 918 1064 E OMXNodeInstance:
setConfig(0xea09d004:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].761 918 11716 E OMXNodeInstance:
getConfig(0xea09d004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].763 918 1960 E OMXNodeInstance:
getConfig(0xea09d004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].789 918 10714 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].789 918 10714 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].789 918 10714 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].789 918 10714 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].789 918 10714 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].790 918 10714 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].790 918 10714 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].790 918 10714 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].796 918 10714 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].796 918 10714 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 45504
05-19 [Link].796 918 10714 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].797 918 10714 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].797 918 1065 E OMXNodeInstance:
setParameter(0xe9930804:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].797 918 1088 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].800 918 10742 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10742
05-19 [Link].801 918 1960 E MtkOmxVdecEx: [0xe9930800] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].801 918 1960 E OMXNodeInstance:
setConfig(0xe9930804:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].802 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28211 hint:-1
pid:918 duration:0 => ret_hdl:28211
05-19 [Link].802 479 1594 I libPowerHal: [PE] scn:0 hdl:28211
lock_user:[email protected] pid:918 tid:10742 dur:0
05-19 [Link].802 918 1960 E OMXNodeInstance:
getParameter(0xe9930804:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].802 918 1088 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].803 918 10742 I mtkpower_client: ret_hdl:28211
05-19 [Link].804 918 5020 E OMXNodeInstance:
getConfig(0xe9930804:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].868 918 10737 E VDO_LOG : GetDecoderAPI hWrapper 0xe9d1e810
05-19 [Link].868 918 10737 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].868 918 10737 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].873 918 10737 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].874 918 10737 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 46440
05-19 [Link].874 918 10737 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xde94b000
05-19 [Link].874 918 10737 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
1280, Offset 0, Padding 0
05-19 [Link].881 918 10772 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10772
05-19 [Link].882 918 10772 I mtkpower_client: ret_hdl:28212
05-19 [Link].882 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28212 hint:-1
pid:918 duration:0 => ret_hdl:28212
05-19 [Link].882 479 1594 I libPowerHal: [PE] scn:1 hdl:28212
lock_user:[email protected] pid:918 tid:10772 dur:0
05-19 [Link].882 918 10714 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].882 918 10714 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].882 918 10714 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].882 918 10714 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].882 918 10714 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].884 918 10713 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].897 918 10713 I mtkpower_client: perf_lock_rel, hdl:28211,
tid:10713
05-19 [Link].898 479 1594 I libPowerHal: [PD] scn:0 hdl:28211
lock_user:[email protected] pid:918 tid:10742 dur:0
05-19 [Link].911 918 10737 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].911 918 10737 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].911 918 10737 I chatty : uid=1046(mediacodec) [email protected]
identical 1 line
05-19 [Link].911 918 10737 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].911 918 10737 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].917 918 10727 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].026 918 10770 I mtkpower_client: perf_lock_rel, hdl:28212,
tid:10770
05-19 [Link].026 918 10770 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:10770
05-19 [Link].027 479 1594 I libPowerHal: [PD] scn:1 hdl:28212
lock_user:[email protected] pid:918 tid:10772 dur:0
05-19 [Link].032 918 10770 I mtkpower_client: ret_hdl:28213
05-19 [Link].033 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28213 hint:-1
pid:918 duration:0 => ret_hdl:28213
05-19 [Link].033 479 1594 I libPowerHal: [PE] scn:0 hdl:28213
lock_user:[email protected] pid:918 tid:10770 dur:0
05-19 [Link].822 918 10736 E VDO_LOG : prDrvVP9handle->nDrvStatus 0x7
05-19 [Link].839 918 10736 I mtkpower_client: perf_lock_rel, hdl:28213,
tid:10736
05-19 [Link].840 918 10736 I mtkpower_client: perf_lock_rel, hdl:28212,
tid:10736
05-19 [Link].840 479 1594 I libPowerHal: [PD] scn:0 hdl:28213
lock_user:[email protected] pid:918 tid:10770 dur:0
05-19 [Link].979 918 1088 E OMXNodeInstance:
setParameter(0xe9e41004:[Link],
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].980 918 15680 E OMXNodeInstance:
getParameter(0xe9e41004:[Link], ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].986 918 1960 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].986 918 1960 E OMXNodeInstance:
setConfig(0xe9e41004:[Link], ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].987 918 1960 E OMXNodeInstance:
getConfig(0xe9e41004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].987 918 1088 E OMXNodeInstance:
getConfig(0xe9e41004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].040 918 10923 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].606 918 10727 E MtkOmxVdecEx: [0xea09d000] RFIAtPTS not found
5000000
05-19 [Link].607 918 10727 I chatty : uid=1046(mediacodec) [email protected]
identical 5 lines
05-19 [Link].608 918 10727 E MtkOmxVdecEx: [0xea09d000] RFIAtPTS not found
5000000
05-19 [Link].290 918 10922 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].291 918 10922 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].291 918 10922 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].291 918 10922 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].707 918 1064 E OMXNodeInstance:
setParameter(0xe9e41004:[Link].VP9,
[Link](0x7f20040e): Output:1 en=0) ERROR:
BadParameter(0x80001005)
05-19 [Link].708 918 1065 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ??(0x6f600011)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].710 918 1784 E MtkOmxVdecEx: [0xe9e41000] MtkOmxVdec::SetConfig
Unknown config index: 0x6F800002
05-19 [Link].710 918 1784 E OMXNodeInstance:
setConfig(0xe9e41004:[Link].VP9, ConfigPriority(0x6f800002)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].715 918 1088 E OMXNodeInstance:
getParameter(0xe9e41004:[Link].VP9, ParamVideoAndroidVp8Encoder(0x6f600007))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].716 918 1064 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].716 918 1088 E OMXNodeInstance:
getConfig(0xe9e41004:[Link].VP9, ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].766 918 11260 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].766 918 11260 E BWC : MTK_IOC_SMI_BWC_INFO_GET
failed.:Inappropriate ioctl for device
05-19 [Link].767 918 11260 E BWC : fail to open mem_bw_ctrl driver file
05-19 [Link].767 918 11260 E BWC : Failed to switch EMI profile, error: -1
05-19 [Link].767 918 11260 E BWC : MTK_IOC_SMI_BWC_INFO_SET
failed.:Inappropriate ioctl for device
05-19 [Link].771 918 11260 E VDO_LOG : GetDecoderAPI hWrapper 0xea208810
05-19 [Link].771 918 11260 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 +
05-19 [Link].778 918 11260 E VDO_LOG : @@ first use vp9 dec, so dlopen
libvp9dec_sa.[Link]
05-19 [Link].513 918 11260 E VDO_LOG : @@ dlopen CODEC_DEC_VP9 -
05-19 [Link].513 918 11260 E VDO_LOG : VideoCodecInitProc() phHandle-
>rInputUnit.u4BuffSize 49159
05-19 [Link].513 918 11260 E VDO_LOG : VideoCodecInitProc() phHandle-
>[Link]->pu1Buffer_VA 0xe4b6a000
05-19 [Link].513 918 11260 E VDO_LOG : vp9_dec_init() u4Width 768, u4Height
960, Offset 0, Padding 0
05-19 [Link].565 918 11281 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11281
05-19 [Link].576 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28227 hint:-1
pid:918 duration:0 => ret_hdl:28227
05-19 [Link].576 479 1594 I libPowerHal: [PE] scn:1 hdl:28227
lock_user:[email protected] pid:918 tid:11281 dur:0
05-19 [Link].576 918 11281 I mtkpower_client: ret_hdl:28227
05-19 [Link].637 918 11260 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].637 918 11260 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].637 918 11260 I chatty : uid=1046(mediacodec) MtkOmxVdecDecod
identical 1 line
05-19 [Link].637 918 11260 E mtkpower_client: PowerHal_Wrap_scnConfig not
support!!!
05-19 [Link].637 918 11260 E VDO_LOG : @@ [DEBUG] PowerHal_Wrap_scnEnable
dlsym, FG prefer idle , adjust migration cost and background boost
05-19 [Link].841 918 11280 I mtkpower_client: perf_lock_rel, hdl:28227,
tid:11280
05-19 [Link].841 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].842 479 1594 I libPowerHal: [PD] scn:1 hdl:28227
lock_user:[email protected] pid:918 tid:11281 dur:0
05-19 [Link].843 918 11280 I mtkpower_client: ret_hdl:28229
05-19 [Link].843 479 1594 I libPowerHal: [perfLockAcq] idx:3 hdl:28229 hint:-1
pid:918 duration:0 => ret_hdl:28229
05-19 [Link].843 479 1594 I libPowerHal: [PE] scn:3 hdl:28229
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].103 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].110 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28231 hint:-1
pid:918 duration:0 => ret_hdl:28231
05-19 [Link].110 479 1594 I libPowerHal: [PE] scn:1 hdl:28231
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].111 918 11280 I mtkpower_client: ret_hdl:28231
05-19 [Link].111 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].113 918 11280 I mtkpower_client: ret_hdl:28232
05-19 [Link].113 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28232 hint:-1
pid:918 duration:0 => ret_hdl:28232
05-19 [Link].113 479 1594 I libPowerHal: [PE] scn:2 hdl:28232
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].250 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].252 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:28234 hint:-1
pid:918 duration:0 => ret_hdl:28234
05-19 [Link].252 479 1594 I libPowerHal: [PE] scn:4 hdl:28234
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].256 918 11280 I mtkpower_client: ret_hdl:28234
05-19 [Link].454 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].454 918 11280 I mtkpower_client: ret_hdl:28235
05-19 [Link].454 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].455 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:28235 hint:-1
pid:918 duration:0 => ret_hdl:28235
05-19 [Link].455 479 1594 I libPowerHal: [PE] scn:5 hdl:28235
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].456 918 11280 I mtkpower_client: ret_hdl:28236
05-19 [Link].456 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:28236 hint:-1
pid:918 duration:0 => ret_hdl:28236
05-19 [Link].456 479 1594 I libPowerHal: [PE] scn:6 hdl:28236
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].500 918 11280 I mtkpower_client: perf_lock_rel, hdl:28236,
tid:11280
05-19 [Link].501 918 11280 I mtkpower_client: perf_lock_rel, hdl:28235,
tid:11280
05-19 [Link].501 918 11280 I mtkpower_client: perf_lock_rel, hdl:28234,
tid:11280
05-19 [Link].501 479 1594 I libPowerHal: [PD] scn:6 hdl:28236
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].502 479 1594 I libPowerHal: [PD] scn:5 hdl:28235
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].502 479 1594 I libPowerHal: [PD] scn:4 hdl:28234
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].674 918 11280 I mtkpower_client: perf_lock_rel, hdl:28232,
tid:11280
05-19 [Link].676 479 1594 I libPowerHal: [PD] scn:2 hdl:28232
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28241 hint:25
pid:479 duration:10000 => ret_hdl:28241
05-19 [Link].918 479 1594 I libPowerHal: [PE] scn:2 hdl:28241 hint:25
comm:[email protected] pid:479
05-19 [Link].918 479 1594 I libPowerHal: [PE] MTKPOWER_HINT_APP_TOUCH update
cmd:3408600 param:1
05-19 [Link].026 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].028 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28242 hint:-1
pid:918 duration:0 => ret_hdl:28242
05-19 [Link].028 479 1594 I libPowerHal: [PE] scn:2 hdl:28242
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].029 918 11280 I mtkpower_client: ret_hdl:28242
05-19 [Link].195 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].196 918 11280 I mtkpower_client: ret_hdl:28247
05-19 [Link].196 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:28247 hint:-1
pid:918 duration:0 => ret_hdl:28247
05-19 [Link].196 479 1594 I libPowerHal: [PE] scn:6 hdl:28247
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].247 918 11280 I mtkpower_client: perf_lock_rel, hdl:28247,
tid:11280
05-19 [Link].247 479 1594 I libPowerHal: [PD] scn:6 hdl:28247
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].341 918 11280 I mtkpower_client: perf_lock_rel, hdl:28242,
tid:11280
05-19 [Link].341 479 1594 I libPowerHal: [PD] scn:2 hdl:28242
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].386 918 11280 I mtkpower_client: perf_lock_rel, hdl:28231,
tid:11280
05-19 [Link].390 479 1594 I libPowerHal: [PD] scn:1 hdl:28231
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].735 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].736 918 11280 I mtkpower_client: ret_hdl:28251
05-19 [Link].736 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28251 hint:-1
pid:918 duration:0 => ret_hdl:28251
05-19 [Link].736 479 1594 I libPowerHal: [PE] scn:0 hdl:28251
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].815 918 11280 I mtkpower_client: perf_lock_rel, hdl:28251,
tid:11280
05-19 [Link].816 479 1594 I libPowerHal: [PD] scn:0 hdl:28251
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 2260 2260 E _V_FloatingBallSwitcher: UpSlide|
floatingBallModeOn = false
05-19 [Link].171 479 1594 I libPowerHal: [PD] scn:3 hdl:28229
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].379 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].380 918 11280 I mtkpower_client: ret_hdl:28252
05-19 [Link].380 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].382 918 11280 I mtkpower_client: ret_hdl:28253
05-19 [Link].382 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].384 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28252 hint:-1
pid:918 duration:0 => ret_hdl:28252
05-19 [Link].384 479 1594 I libPowerHal: [PE] scn:0 hdl:28252
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].386 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28253 hint:-1
pid:918 duration:0 => ret_hdl:28253
05-19 [Link].386 479 1594 I libPowerHal: [PE] scn:1 hdl:28253
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].391 918 11280 I mtkpower_client: ret_hdl:28254
05-19 [Link].391 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].392 918 11280 I mtkpower_client: ret_hdl:28255
05-19 [Link].392 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].394 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28254 hint:-1
pid:918 duration:0 => ret_hdl:28254
05-19 [Link].394 479 1594 I libPowerHal: [PE] scn:2 hdl:28254
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].395 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:28255 hint:-1
pid:918 duration:0 => ret_hdl:28255
05-19 [Link].395 479 1594 I libPowerHal: [PE] scn:4 hdl:28255
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].396 918 11280 I mtkpower_client: ret_hdl:28256
05-19 [Link].396 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].397 918 11280 I mtkpower_client: ret_hdl:28257
05-19 [Link].398 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:28256 hint:-1
pid:918 duration:0 => ret_hdl:28256
05-19 [Link].398 479 1594 I libPowerHal: [PE] scn:5 hdl:28256
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].399 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:28257 hint:-1
pid:918 duration:0 => ret_hdl:28257
05-19 [Link].399 479 1594 I libPowerHal: [PE] scn:6 hdl:28257
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].475 918 11280 I mtkpower_client: perf_lock_rel, hdl:28257,
tid:11280
05-19 [Link].475 918 11280 I mtkpower_client: perf_lock_rel, hdl:28256,
tid:11280
05-19 [Link].476 479 1594 I libPowerHal: [PD] scn:6 hdl:28257
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].478 479 1594 I libPowerHal: [PD] scn:5 hdl:28256
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].542 918 11280 I mtkpower_client: perf_lock_rel, hdl:28255,
tid:11280
05-19 [Link].543 918 11280 I mtkpower_client: perf_lock_rel, hdl:28254,
tid:11280
05-19 [Link].543 479 1594 I libPowerHal: [PD] scn:4 hdl:28255
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].548 479 1594 I libPowerHal: [PD] scn:2 hdl:28254
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].638 918 11280 I mtkpower_client: perf_lock_rel, hdl:28253,
tid:11280
05-19 [Link].640 479 1594 I libPowerHal: [PD] scn:1 hdl:28253
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].789 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].791 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28258 hint:-1
pid:918 duration:0 => ret_hdl:28258
05-19 [Link].791 918 11280 I mtkpower_client: ret_hdl:28258
05-19 [Link].791 479 1594 I libPowerHal: [PE] scn:1 hdl:28258
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].868 918 11280 I mtkpower_client: perf_lock_rel, hdl:28258,
tid:11280
05-19 [Link].869 918 11280 I mtkpower_client: perf_lock_rel, hdl:28252,
tid:11280
05-19 [Link].870 479 1594 I libPowerHal: [PD] scn:1 hdl:28258
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].871 479 1594 I libPowerHal: [PD] scn:0 hdl:28252
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 940 3997 E FMQ : grantorIdx must be less than 3
05-19 [Link].048 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].050 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28259 hint:-1
pid:918 duration:0 => ret_hdl:28259
05-19 [Link].050 479 1594 I libPowerHal: [PE] scn:0 hdl:28259
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].050 918 11280 I mtkpower_client: ret_hdl:28259
05-19 [Link].305 918 11280 I mtkpower_client: perf_lock_rel, hdl:28259,
tid:11280
05-19 [Link].306 479 1594 I libPowerHal: [PD] scn:0 hdl:28259
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 1303 1433 E _V_VivoPowerManagerService: wakeUp(Binder call)
uid=1000 ident=4294967297303 reason=1 details=[Link]:POWER pkgName=android
mProximityEnabled=false mProximityStatus=false
05-19 [Link].918 1303 1322 E ActivityManager: Sending non-protected broadcast
[Link].POWER_KEY_SCREEN_OFF from system 1303:system/1000 pkg android
05-19 [Link].080 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].081 918 11280 I mtkpower_client: ret_hdl:28260
05-19 [Link].081 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28260 hint:-1
pid:918 duration:0 => ret_hdl:28260
05-19 [Link].081 479 1594 I libPowerHal: [PE] scn:0 hdl:28260
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].162 918 11280 I mtkpower_client: perf_lock_rel, hdl:28260,
tid:11280
05-19 [Link].163 479 1594 I libPowerHal: [PD] scn:0 hdl:28260
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].643 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].645 918 11280 I mtkpower_client: ret_hdl:28261
05-19 [Link].645 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28261 hint:-1
pid:918 duration:0 => ret_hdl:28261
05-19 [Link].645 479 1594 I libPowerHal: [PE] scn:0 hdl:28261
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].802 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].804 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28262 hint:-1
pid:918 duration:0 => ret_hdl:28262
05-19 [Link].804 479 1594 I libPowerHal: [PE] scn:1 hdl:28262
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].805 918 11280 I mtkpower_client: ret_hdl:28262
05-19 [Link].817 479 1594 I libPowerHal: [PD] scn:0 hdl:28261
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].817 479 1594 I libPowerHal: [PD] scn:1 hdl:28262
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].015 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].015 918 11280 I mtkpower_client: ret_hdl:28263
05-19 [Link].016 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28263 hint:-1
pid:918 duration:0 => ret_hdl:28263
05-19 [Link].016 479 1594 I libPowerHal: [PE] scn:2 hdl:28263
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].379 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].382 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:28264 hint:-1
pid:918 duration:0 => ret_hdl:28264
05-19 [Link].382 479 1594 I libPowerHal: [PE] scn:4 hdl:28264
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].383 918 11280 I mtkpower_client: ret_hdl:28264
05-19 [Link].383 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].385 918 11280 I mtkpower_client: ret_hdl:28265
05-19 [Link].385 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].386 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:28265 hint:-1
pid:918 duration:0 => ret_hdl:28265
05-19 [Link].386 479 1594 I libPowerHal: [PE] scn:5 hdl:28265
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].388 918 11280 I mtkpower_client: ret_hdl:28266
05-19 [Link].388 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].389 479 1594 I libPowerHal: [perfLockAcq] idx:6 hdl:28266 hint:-1
pid:918 duration:0 => ret_hdl:28266
05-19 [Link].389 479 1594 I libPowerHal: [PE] scn:6 hdl:28266
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].390 918 11280 I mtkpower_client: ret_hdl:28267
05-19 [Link].390 479 1594 I libPowerHal: [perfLockAcq] idx:7 hdl:28267 hint:-1
pid:918 duration:0 => ret_hdl:28267
05-19 [Link].390 479 1594 I libPowerHal: [PE] scn:7 hdl:28267
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].871 918 11280 I mtkpower_client: perf_lock_rel, hdl:28267,
tid:11280
05-19 [Link].873 479 1594 I libPowerHal: [PD] scn:7 hdl:28267
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].919 918 11280 I mtkpower_client: perf_lock_rel, hdl:28266,
tid:11280
05-19 [Link].919 918 11280 I mtkpower_client: perf_lock_rel, hdl:28265,
tid:11280
05-19 [Link].919 918 11280 I mtkpower_client: perf_lock_rel, hdl:28264,
tid:11280
05-19 [Link].920 918 11280 I mtkpower_client: perf_lock_rel, hdl:28263,
tid:11280
05-19 [Link].920 479 1594 I libPowerHal: [PD] scn:6 hdl:28266
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].921 479 1594 I libPowerHal: [PD] scn:5 hdl:28265
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].923 479 1594 I libPowerHal: [PD] scn:4 hdl:28264
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].924 479 1594 I libPowerHal: [PD] scn:2 hdl:28263
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].958 918 11280 I mtkpower_client: perf_lock_rel, hdl:28262,
tid:11280
05-19 [Link].038 918 11280 I mtkpower_client: perf_lock_rel, hdl:28261,
tid:11280
05-19 [Link].353 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].354 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28268 hint:-1
pid:918 duration:0 => ret_hdl:28268
05-19 [Link].354 479 1594 I libPowerHal: [PE] scn:0 hdl:28268
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].355 918 11280 I mtkpower_client: ret_hdl:28268
05-19 [Link].355 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].357 918 11280 I mtkpower_client: ret_hdl:28269
05-19 [Link].357 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].357 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28269 hint:-1
pid:918 duration:0 => ret_hdl:28269
05-19 [Link].357 479 1594 I libPowerHal: [PE] scn:1 hdl:28269
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].359 918 11280 I mtkpower_client: ret_hdl:28270
05-19 [Link].359 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28270 hint:-1
pid:918 duration:0 => ret_hdl:28270
05-19 [Link].365 479 1594 I libPowerHal: [PE] scn:2 hdl:28270
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].435 918 11280 I mtkpower_client: perf_lock_rel, hdl:28270,
tid:11280
05-19 [Link].436 479 1594 I libPowerHal: [PD] scn:2 hdl:28270
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].510 918 11280 I mtkpower_client: perf_lock_rel, hdl:28269,
tid:11280
05-19 [Link].510 918 11280 I mtkpower_client: perf_lock_rel, hdl:28268,
tid:11280
05-19 [Link].511 479 1594 I libPowerHal: [PD] scn:1 hdl:28269
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].512 479 1594 I libPowerHal: [PD] scn:0 hdl:28268
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].064 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].067 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28271 hint:-1
pid:918 duration:0 => ret_hdl:28271
05-19 [Link].067 479 1594 I libPowerHal: [PE] scn:0 hdl:28271
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].069 918 11280 I mtkpower_client: ret_hdl:28271
05-19 [Link].069 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].070 918 11280 I mtkpower_client: ret_hdl:28272
05-19 [Link].070 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28272 hint:-1
pid:918 duration:0 => ret_hdl:28272
05-19 [Link].070 479 1594 I libPowerHal: [PE] scn:1 hdl:28272
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].167 918 11280 I mtkpower_client: perf_lock_rel, hdl:28272,
tid:11280
05-19 [Link].169 479 1594 I libPowerHal: [PD] scn:1 hdl:28272
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].464 918 11280 I mtkpower_client: perf_lock_rel, hdl:28271,
tid:11280
05-19 [Link].465 479 1594 I libPowerHal: [PD] scn:0 hdl:28271
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].835 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].837 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28273 hint:-1
pid:918 duration:0 => ret_hdl:28273
05-19 [Link].837 479 1594 I libPowerHal: [PE] scn:0 hdl:28273
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].841 918 11280 I mtkpower_client: ret_hdl:28273
05-19 [Link].173 918 11280 I mtkpower_client: perf_lock_rel, hdl:28273,
tid:11280
05-19 [Link].174 479 1594 I libPowerHal: [PD] scn:0 hdl:28273
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].348 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].349 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28274 hint:-1
pid:918 duration:0 => ret_hdl:28274
05-19 [Link].349 479 1594 I libPowerHal: [PE] scn:0 hdl:28274
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].350 918 11280 I mtkpower_client: ret_hdl:28274
05-19 [Link].451 918 11280 I mtkpower_client: perf_lock_rel, hdl:28274,
tid:11280
05-19 [Link].452 479 1594 I libPowerHal: [PD] scn:0 hdl:28274
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].480 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].482 918 11280 I mtkpower_client: ret_hdl:28275
05-19 [Link].482 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28275 hint:-1
pid:918 duration:0 => ret_hdl:28275
05-19 [Link].482 479 1594 I libPowerHal: [PE] scn:0 hdl:28275
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].580 918 11280 I mtkpower_client: perf_lock_rel, hdl:28275,
tid:11280
05-19 [Link].581 479 1594 I libPowerHal: [PD] scn:0 hdl:28275
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].686 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].690 918 11280 I mtkpower_client: ret_hdl:28276
05-19 [Link].690 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28276 hint:-1
pid:918 duration:0 => ret_hdl:28276
05-19 [Link].690 479 1594 I libPowerHal: [PE] scn:0 hdl:28276
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].020 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].021 918 11280 I mtkpower_client: ret_hdl:28277
05-19 [Link].021 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28277 hint:-1
pid:918 duration:0 => ret_hdl:28277
05-19 [Link].021 479 1594 I libPowerHal: [PE] scn:1 hdl:28277
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].066 918 11280 I mtkpower_client: perf_lock_rel, hdl:28277,
tid:11280
05-19 [Link].066 918 11280 I mtkpower_client: perf_lock_rel, hdl:28276,
tid:11280
05-19 [Link].066 479 1594 I libPowerHal: [PD] scn:1 hdl:28277
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].068 479 1594 I libPowerHal: [PD] scn:0 hdl:28276
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].811 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].812 918 11280 I mtkpower_client: ret_hdl:28278
05-19 [Link].813 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].813 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28278 hint:-1
pid:918 duration:0 => ret_hdl:28278
05-19 [Link].813 479 1594 I libPowerHal: [PE] scn:0 hdl:28278
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].815 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28279 hint:-1
pid:918 duration:0 => ret_hdl:28279
05-19 [Link].816 479 1594 I libPowerHal: [PE] scn:1 hdl:28279
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].817 918 11280 I mtkpower_client: ret_hdl:28279
05-19 [Link].126 918 11280 I mtkpower_client: perf_lock_rel, hdl:28279,
tid:11280
05-19 [Link].126 918 11280 I mtkpower_client: perf_lock_rel, hdl:28278,
tid:11280
05-19 [Link].127 479 1594 I libPowerHal: [PD] scn:1 hdl:28279
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].129 479 1594 I libPowerHal: [PD] scn:0 hdl:28278
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].257 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].258 918 11280 I mtkpower_client: ret_hdl:28280
05-19 [Link].258 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].258 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28280 hint:-1
pid:918 duration:0 => ret_hdl:28280
05-19 [Link].258 479 1594 I libPowerHal: [PE] scn:0 hdl:28280
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].259 918 11280 I mtkpower_client: ret_hdl:28281
05-19 [Link].260 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].260 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28281 hint:-1
pid:918 duration:0 => ret_hdl:28281
05-19 [Link].260 479 1594 I libPowerHal: [PE] scn:1 hdl:28281
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].261 918 11280 I mtkpower_client: ret_hdl:28282
05-19 [Link].261 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].262 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28282 hint:-1
pid:918 duration:0 => ret_hdl:28282
05-19 [Link].262 479 1594 I libPowerHal: [PE] scn:2 hdl:28282
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].263 918 11280 I mtkpower_client: ret_hdl:28283
05-19 [Link].265 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:28283 hint:-1
pid:918 duration:0 => ret_hdl:28283
05-19 [Link].265 479 1594 I libPowerHal: [PE] scn:4 hdl:28283
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].325 918 11280 I mtkpower_client: perf_lock_rel, hdl:28283,
tid:11280
05-19 [Link].326 918 11280 I mtkpower_client: perf_lock_rel, hdl:28282,
tid:11280
05-19 [Link].327 479 1594 I libPowerHal: [PD] scn:4 hdl:28283
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].328 479 1594 I libPowerHal: [PD] scn:2 hdl:28282
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].362 918 11280 I mtkpower_client: perf_lock_rel, hdl:28281,
tid:11280
05-19 [Link].362 479 1594 I libPowerHal: [PD] scn:1 hdl:28281
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].438 918 11280 I mtkpower_client: perf_lock_rel, hdl:28280,
tid:11280
05-19 [Link].439 479 1594 I libPowerHal: [PD] scn:0 hdl:28280
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 23232 12367 E FMQ : grantorIdx must be less than 3
05-19 [Link].918 421 428 E [Link]@1.0-service: Error opening
kernel wakelock stats for: wakeup29: Permission denied
05-19 [Link].334 940 12918 E FMQ : grantorIdx must be less than 3
05-19 [Link].918 1303 1322 E _V_VivoVibratorServiceImpl: onProcessDied pid:
11509,uid: 99910183
05-19 [Link].470 923 1010 E [Link]@2.0-service-mediatek:
akm_log setv_mag(uT) 42.300003, -29.100000, -166.800003 ts 27436991825
05-19 [Link].263 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].272 918 11280 I mtkpower_client: ret_hdl:28299
05-19 [Link].273 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28299 hint:-1
pid:918 duration:0 => ret_hdl:28299
05-19 [Link].273 479 1594 I libPowerHal: [PE] scn:1 hdl:28299
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].283 918 11280 I mtkpower_client: perf_lock_rel, hdl:28299,
tid:11280
05-19 [Link].284 479 1594 I libPowerHal: [PD] scn:1 hdl:28299
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].431 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].433 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28306 hint:-1
pid:918 duration:0 => ret_hdl:28306
05-19 [Link].433 479 1594 I libPowerHal: [PE] scn:0 hdl:28306
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].434 918 11280 I mtkpower_client: ret_hdl:28306
05-19 [Link].522 918 11280 I mtkpower_client: perf_lock_rel, hdl:28306,
tid:11280
05-19 [Link].523 479 1594 I libPowerHal: [PD] scn:0 hdl:28306
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].097 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].101 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28312 hint:-1
pid:918 duration:0 => ret_hdl:28312
05-19 [Link].101 479 1594 I libPowerHal: [PE] scn:1 hdl:28312
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].102 918 11280 I mtkpower_client: ret_hdl:28312
05-19 [Link].304 918 11280 I mtkpower_client: perf_lock_rel, hdl:28312,
tid:11280
05-19 [Link].305 479 1594 I libPowerHal: [PD] scn:1 hdl:28312
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].390 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].392 918 11280 I mtkpower_client: ret_hdl:28342
05-19 [Link].392 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].394 918 11280 I mtkpower_client: ret_hdl:28343
05-19 [Link].395 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28342 hint:-1
pid:918 duration:0 => ret_hdl:28342
05-19 [Link].395 479 1594 I libPowerHal: [PE] scn:1 hdl:28342
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].396 479 1594 I libPowerHal: [perfLockAcq] idx:4 hdl:28343 hint:-1
pid:918 duration:0 => ret_hdl:28343
05-19 [Link].396 479 1594 I libPowerHal: [PE] scn:4 hdl:28343
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].432 918 11280 I mtkpower_client: perf_lock_rel, hdl:28343,
tid:11280
05-19 [Link].434 479 1594 I libPowerHal: [PD] scn:4 hdl:28343
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].489 918 11280 I mtkpower_client: perf_lock_rel, hdl:28342,
tid:11280
05-19 [Link].489 479 1594 I libPowerHal: [PD] scn:1 hdl:28342
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].138 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].141 918 11280 I mtkpower_client: ret_hdl:28367
05-19 [Link].142 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:28367 hint:-1
pid:918 duration:0 => ret_hdl:28367
05-19 [Link].142 479 1594 I libPowerHal: [PE] scn:5 hdl:28367
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].275 918 11280 I mtkpower_client: perf_lock_rel, hdl:28367,
tid:11280
05-19 [Link].276 479 1594 I libPowerHal: [PD] scn:5 hdl:28367
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].023 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].025 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28373 hint:-1
pid:918 duration:0 => ret_hdl:28373
05-19 [Link].025 479 1594 I libPowerHal: [PE] scn:0 hdl:28373
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].025 918 11280 I mtkpower_client: ret_hdl:28373
05-19 [Link].101 918 11280 I mtkpower_client: perf_lock_rel, hdl:28373,
tid:11280
05-19 [Link].102 479 1594 I libPowerHal: [PD] scn:0 hdl:28373
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].194 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].197 918 11280 I mtkpower_client: ret_hdl:28383
05-19 [Link].198 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28383 hint:-1
pid:918 duration:0 => ret_hdl:28383
05-19 [Link].198 479 1594 I libPowerHal: [PE] scn:0 hdl:28383
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].449 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].450 479 1594 I libPowerHal: [perfLockAcq] idx:1 hdl:28384 hint:-1
pid:918 duration:0 => ret_hdl:28384
05-19 [Link].450 479 1594 I libPowerHal: [PE] scn:1 hdl:28384
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].451 918 11280 I mtkpower_client: ret_hdl:28384
05-19 [Link].507 918 11280 I mtkpower_client: perf_lock_rel, hdl:28384,
tid:11280
05-19 [Link].508 479 1594 I libPowerHal: [PD] scn:1 hdl:28384
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].603 918 11280 I mtkpower_client: perf_lock_rel, hdl:28383,
tid:11280
05-19 [Link].604 479 1594 I libPowerHal: [PD] scn:0 hdl:28383
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].634 918 13399 E OMXNodeInstance:
getParameter(0xea2e8004:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].636 918 13399 E OMXNodeInstance:
getParameter(0xea2e8004:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].642 918 13399 E OMXNodeInstance:
getConfig(0xea2e8004:[Link], ConfigAndroidVendorExtension(0x6f100004))
ERROR: UnsupportedIndex(0x8000101a)
05-19 [Link].643 918 15680 E OMXNodeInstance:
getParameter(0xea2e8004:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].643 918 13399 E OMXNodeInstance:
getConfig(0xea2e8004:[Link], ConfigCommonOutputCrop(0x700000f)) ERROR:
BadParameter(0x80001005)
05-19 [Link].747 918 14030 E mtkpower_client: PowerHal_Wrap_scnReg not
support!!!
05-19 [Link].750 918 13399 E OMXNodeInstance:
getParameter(0xea2e8004:[Link], ??(0x7f200405)) ERROR:
UnsupportedIndex(0x8000101a)
05-19 [Link].918 363 363 E SELinux : avc: denied { find } for
interface=[Link]::IVPerf
sid=u:r:untrusted_app:s0:c46,c257,c512,c768 pid=20340
scontext=u:r:untrusted_app:s0:c46,c257,c512,c768
tcontext=u:object_r:hal_vperf_hwservice:s0 tclass=hwservice_manager permissive=0
05-19 [Link].918 20340 20340 E ANDR-VIVO-PERF: IVPerf::tryGetService failed!
05-19 [Link].526 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].552 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28428 hint:-1
pid:918 duration:0 => ret_hdl:28428
05-19 [Link].552 479 1594 I libPowerHal: [PE] scn:0 hdl:28428
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].553 918 11280 I mtkpower_client: ret_hdl:28428
05-19 [Link].570 918 11280 I mtkpower_client: perf_lock_rel, hdl:28428,
tid:11280
05-19 [Link].572 479 1594 I libPowerHal: [PD] scn:0 hdl:28428
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].549 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].550 918 11280 I mtkpower_client: ret_hdl:28460
05-19 [Link].550 479 1594 I libPowerHal: [perfLockAcq] idx:9 hdl:28460 hint:-1
pid:918 duration:0 => ret_hdl:28460
05-19 [Link].550 479 1594 I libPowerHal: [PE] scn:9 hdl:28460
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].688 918 11280 I mtkpower_client: perf_lock_rel, hdl:28460,
tid:11280
05-19 [Link].689 479 1594 I libPowerHal: [PD] scn:9 hdl:28460
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 2164 2193 E _V_ProxCoverNoticeService: monitor view is null,
no need to update minimum
05-19 [Link].326 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].330 479 1594 I libPowerHal: [perfLockAcq] idx:2 hdl:28481 hint:-1
pid:918 duration:0 => ret_hdl:28481
05-19 [Link].330 479 1594 I libPowerHal: [PE] scn:2 hdl:28481
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].348 918 11280 I mtkpower_client: ret_hdl:28481
05-19 [Link].348 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].351 918 11280 I mtkpower_client: ret_hdl:28482
05-19 [Link].351 479 1594 I libPowerHal: [perfLockAcq] idx:5 hdl:28482 hint:-1
pid:918 duration:0 => ret_hdl:28482
05-19 [Link].351 479 1594 I libPowerHal: [PE] scn:5 hdl:28482
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].564 918 11280 I mtkpower_client: perf_lock_rel, hdl:28482,
tid:11280
05-19 [Link].565 479 1594 I libPowerHal: [PD] scn:5 hdl:28482
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].636 918 11280 I mtkpower_client: perf_lock_rel, hdl:28481,
tid:11280
05-19 [Link].636 479 1594 I libPowerHal: [PD] scn:2 hdl:28481
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 23232 15924 E FMQ : grantorIdx must be less than 3
05-19 [Link].918 940 29493 E FMQ : grantorIdx must be less than 3
05-19 [Link].918 507 7243 V APM_AudioPolicyManager: selectOutput new
bestOutput 13 criteria 0 0 0 0 0 0 0 2
05-19 [Link].918 507 7243 V APM_AudioPolicyManager: getOutput() stream 3
selected devices {type:0x4,@:}, output 13
05-19 [Link].918 507 4197 V APM_AudioPolicyManager: selectOutput new
bestOutput 13 criteria 0 0 0 0 0 0 0 2
05-19 [Link].918 507 4197 V APM_AudioPolicyManager: getOutput() stream 3
selected devices {type:0x4,@:}, output 13
05-19 [Link].146 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].160 918 11280 I mtkpower_client: ret_hdl:28540
05-19 [Link].160 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28540 hint:-1
pid:918 duration:0 => ret_hdl:28540
05-19 [Link].160 479 1594 I libPowerHal: [PE] scn:0 hdl:28540
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].198 918 11280 I mtkpower_client: perf_lock_rel, hdl:28540,
tid:11280
05-19 [Link].200 479 1594 I libPowerHal: [PD] scn:0 hdl:28540
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].918 23232 16594 E FMQ : grantorIdx must be less than 3
05-19 [Link].612 918 15680 E OMXNodeInstance: !!! Observer died. Quickly, do
something, ... anything...
05-19 [Link].918 421 428 E [Link]@1.0-service: Error opening
kernel wakelock stats for: wakeup26: Permission denied
05-19 [Link].052 918 11280 I mtkpower_client: perf_lock_acq, hdl:0, dur:0,
num:16, tid:11280
05-19 [Link].079 479 1594 I libPowerHal: [perfLockAcq] idx:0 hdl:28541 hint:-1
pid:918 duration:0 => ret_hdl:28541
05-19 [Link].080 479 1594 I libPowerHal: [PE] scn:0 hdl:28541
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].086 918 11280 I mtkpower_client: ret_hdl:28541
05-19 [Link].163 918 11280 I mtkpower_client: perf_lock_rel, hdl:28541,
tid:11280
05-19 [Link].164 479 1594 I libPowerHal: [PD] scn:0 hdl:28541
lock_user:[email protected] pid:918 tid:11280 dur:0
05-19 [Link].890 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].918 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].947 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].970 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].014 918 11260 D VP9DEC : frm_idx 60887 droppable_frame 0xe1afc000
05-19 [Link].014 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe18d2000, handle:0x35, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].046 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].088 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].181 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].203 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].236 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].267 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe18d2000, handle:0x35, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].277 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].307 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].369 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].382 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].389 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].412 918 11260 D VP9DEC : frm_idx 60900 droppable_frame 0xe6283000
05-19 [Link].412 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe18d2000, handle:0x35, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].474 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].496 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].548 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].564 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].598 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].633 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].688 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].697 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].724 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].761 918 11260 D VP9DEC : frm_idx 60911 droppable_frame 0xe6398000
05-19 [Link].762 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe18d2000, handle:0x35, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].852 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].868 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].879 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].906 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].943 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe17bd000, handle:0x38, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].964 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].029 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].038 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].053 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].082 918 11260 D VP9DEC : frm_idx 60922 droppable_frame 0xe1e3b000
05-19 [Link].082 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].137 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].151 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].192 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].221 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].252 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].285 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].324 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].362 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].392 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].420 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].448 918 11260 D VP9DEC : frm_idx 60934 droppable_frame 0xe6398000
05-19 [Link].448 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe19e7000, handle:0x12, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].509 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe64ad000, handle:0x1, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].525 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6398000, handle:0xb, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].554 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1e3b000, handle:0xf, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].625 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe6283000, handle:0xc, size: 1134592,
type:ION_CACHE_FLUSH_BY_RANGE
05-19 [Link].637 918 11260 I VDO_LOG : [Info]
[eVideoFlushCache]cmd:ION_SYS_CACHE_SYNC, va:0xe1afc000, handle:0x10, size:
1134592, type:ION_CACHE_FLUSH_BY_RANGE