No.

SS2-KDP100-0100

Pneumatic Differential Pressure Transmitter

Model KDP11/22/33/44/81/82

Overview
Model KDP is a pneumatic transmitter which employs a
combination of a vector balance mechanism and an involute
mechanism. Its wide variety of features include high resis-
tance against adverse environments, high turn-down ratio,
and easy maintenance.

Specifications
Model KDP11/22
Standard specifications
Item Basic model No.
KDP11 KDP22 KDP33 KDP44 KDP81 KDP82
(high differential (medium differential (low differential (very low differential (high-pressure (high-pressure
pressure) pressure) pressure) pressure) resistant, high resistant, medium
differential pressure) differential pressure)
Measuring range From From From From From From
(continuously variable) 0–25 to 0–500 kPa 0–2.5 to 0–53.9 kPa 0–0.5 to 0–6 kPa 0–0.1 to 0–1.2 kPa 0–25 to 0–500 kPa 0–2.5 to 0–53.9 kPa
Process connection Rc 1/2 or NPT 1/2 female thread
Air supply connection Rc 1/4 or NPT 1/4 female thread
Supply air pressure 140 ±14 kPa
Output 20 to 100 kPa (see the model number selection for other outputs)
External load I.D. 4 mm × Length 3 m + 20 cm 3 or more
Air supply capacity 20 L/min (normal) or more at 6.7 kPa
Air consumption 5 L/min (normal) or less (when balanced at 100 % output)
Accuracy ±0.5 % FS ±0.5 % FS ±0.5 % FS ±0.5 % FS ±0.5 % FS (span ±0.5 % FS
(span 50 to 500 kPa), (span 5 to 53.9 kPa), (span 1 to 6 kPa), (span 0.2 to 1.2 kPa), 50 to 500 kPa), (span 5 to 53.9 kPa),
±0.75 % FS ±0.75 % FS ±1.0 % FS ±1.0 % FS ±1.0 % FS ±1.0 % FS
(span 25 to < 50 kPa) (span 2.5 to < 5 Pa) (span 0.5 to < 1 kPa) (span 0.1 to < 0.2 kPa) (span 25 to< 50 kPa) (span 2.5 to < 5 kPa)
Deadband 0.1 % FS
Damping adjustment See Y169 in the optional specifications table. Minimum: 2 seconds Always 0.5 seconds max. (see the optional
or less, maximum: 15 specifications for variable adjustment)
seconds or more
Operating pressure −50 kPa to +10 MPa *1 −50 kPa to +3.5 MPa *1 −1.5 kPa to +0.5 MPa −50 kPa to +42 MPa
Operating Meter body (process fluid): −40 to +120 °C
temperature Transmitter (ambient): −30 to +80 °C (see fig. 1, 2, or 3)

Operating humidity 10 to 90 % RH
Overload resistance 10 MPa in either direction 3.5 MPa in either 0.5 MPa in either 42 MPa in either direction
direction direction
Structure Dust-proof and waterproof: Satisfies IEC IP54, NEMA TYPE 3R, JIS C0920 rainproof
Meter Carbon steel (SF440A), SUSF316, nickel copper Carbon steel (SF440A), Carbon steel (SF440A), SUSF316
Material

body cover alloy, PVC (with SUS304 reinforcing plate) *2 SUSF316, nickel copper
(differential alloy, PVC (with
pressure SUS304 reinforcing
chamber) plate) *3
Wetted parts SUS316 *4, SUS316L, nickel copper alloy, tantalum SUS316 SUS316 *4, SUS316L, nickel copper alloy, tantalum
Wetted parts FEP PTFE
gasket
Transmitter case Aluminum alloy
Sealed liquid Silicone oil
Main unit SUS304 - SUS304
Finish Baked acrylic finish. Color: light beige (Munsell 4Y7.2/1.3)
Mounting On vertical or horizontal 2-inch pipe On horizontal 2-inch pipe
Mass Approx. 9 kg *5 Approx. 16 kg *5 Approx. 16 kg *5 Approx. 16 kg *5

Specifications are subject to change without notice.  “This product is designed for general industrial use.”
1 1st edition
No. SS2-KDP100-0100 Azbil Corporation
*1. It varies depending on the cover material. (See fig. 1, 2, or 3.)
*2. Operating pressure: −10 to +1500 kPa, operating temperature: 0 to 55 °C
*3. Operating pressure: −10 kPa to +1 MPa, operating temperature: 0 to 55 °C
*4. Diaphragm: SUS316L
*5. Add +0.6 kg for model with Pressure Regulator with air filter (RA1B)

Additional specifications
Item Models KDP11 (HI df. pr.), Models KDP22 (MED. df. pr.), Model KDP33 (LO df. pr.) Model KDP44 (VERY LO df. pr.)
KDP81 (HI-pr. resist., HI df. pr.) KDP82 (HI-pr. resist., MED. df. pr.)
Suppression Span 25 to 500 kPa 2.5 to 53.9 kPa 0.5 to 6 kPa 0.1 to 1.2 kPa
and elevation* Suppression (max.) 500 kPa 53.9 kPa 6 kPa 1.2 kPa
Elevation (max.) 475 kPa 51.4 kPa 5.5 kPa 1.1 kPa
Pressure
Regulator Primary pressure 200 to 1035 kPa
with air filter
Secondary 140 kPa
(RA1B)
pressure

Filter mesh 5 μm
diameter
connection Rc 1/4 or NPT 1/4 female thread
High-accuracy type KDP11: KDP22:
±0.25 % FS (span 50 to 500 kPa), ±0.25 % FS (span 5 to 53.9 kPa),
±0.5 % FS (span 25 to < 50 kPa) ±0.5 % FS (span 2.5 to < 5 kPa)

* Elevation + Span ≤ Maximum span

Suppression ≤ Maximum span

Optional specifications
Item Specifications
For vacuum *1 Y23 Cannot be combined with Y169, Y182, or Y183 (see fig. 6 or 7)
SUS304 bolt for meter body Y66 Maximum operating KDP11/22/44 For SUSF316 or nickel copper alloy cover: 6 MPa G,
cover pressure For PVC cover: 1.5 MPa G
KDP33 For SUSF316 or nickel copper alloy cover: 2.5 MPa G,
For PVC cover: 1 MPa G
KDP81/82 Maximum operating pressure: 23 MPa
Corrosion-resistant and Y138 Corrosion-resistant (baked acrylic) finish (Y138A) Resistance against corrosive gases
silver finish Heavy corrosion-resistant (baked epoxy) finish (Y138B) Resistance against corrosive liquids
Silver-normal (baked acrylic) finish (Y138C) Prevention of device temperature rise due to direct sunlight, radiant heat, etc.
Silver-corrosion-resistant (baked acrylic) finish (Y138D) Prevention of temperature rise as described above and resistance to corrosive gases
Note: Silver finish should not be used in alkaline gases.
Damping adjustment Y169 Time constant KDP11/22/81/82 Minimum: 0.5 seconds or less, maximum: 15 seconds or more
(continuously
KDP33 Minimum: 3 seconds or less, maximum: 15 seconds or more
variable)
Note for model KDP11: When this option is used in combination with Y182 or Y183, the minimum is 0.5 seconds or less and the
maximum is 3 seconds or more.
Process piping rear Y171 Applicable to carbon steel, SUSF316, and SUS316L covers (the transmitter can be installed on a horizontal 2-inch pipe only)
connection type *2
For oxygen Y182 Wetted parts material SUS316 or SUS316L
Sealed liquid Fluorine oil
(See fig. 4 or 5.)
Operating temperature (fluid and ambient) −10 to +60 °C
Wetted parts degreased
For chlorine *1 Y183 Wetted parts material Tantalum
Sealed liquid Fluorine oil
Operating temperature (fluid and ambient) −10 to +80 °C
(See fig. 4.)
Wetted parts degreased
Output indicator Y185 With φ100 gauge
Low flow rate measurement Y186
transmitter *3
High vibration resistance *4 Y188 High vibration-resistance model with a dashpot

*1. This option cannot be selected for the KDP44.

*2. This option cannot be selected for the KDP33/44/81/82.
*3. This option cannot be selected for the KDP22/44/81.
*4. This option cannot be selected for the KDP33.

2
Azbil Corporation No. SS2-KDP100-0100

Operable Range
0 0

Operating Pressure (kPa abs)

-1.5

Working Pressuie (kPa {kgf/cm2})

{-0.015}

-10 -10
{-0.1} {-0.1}
Cover: PVC
-20 -20
{-0.2} {-0.2}

Operable Range
-30 -30
{-0.3} {-0.3}

-40 -40
{-0.4} {-0.4}

-50 -50
{-0.5} {-0.5}
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120
Temperature (°C) Temperature (°C)
Figure 1. Operating pressure and temperature of wetted parts Figure 2. Operating pressure and temperature of wetted parts
(model KDP11/22/33) (model KDP44)

0
Operating Pressure (kPa abs)

-10

-20

Operable Range
-30

-40

-50

-40 -20 0 20 40 60 80 100 120

Temperature (°C)
Figure 3. Operating pressure and temperature of wetted parts
(model KDP81/82)

Up to Operatable Pressure Limit

}
For oxygen measurement

Working Pressure (kPa abs.{mmHg abs.} )

Up to
gas measurement
Operating Pressure (kPa abs)

Working Pressure Limit

For chlorine

Operable Range Operable Range

133.3 {1000}
133.3
99.9 {749}
101.3
66.7 {500}
66.7
53.3 53.3 {400}

40 40.0 {300}

26.7 26.7 {200}

13.3 13.3 {100}

-10 0 20 40 60 80 100 120
-10 0 20 40 60 80 100 120
Temperature (°C) Temperature (°C)
Figure 4. Operating pressure and temperature of wetted parts for oxygen Figure 5. Operating pressure and temperature of wetted parts for oxygen
and chlorine use (model KDP11/22/33/81/82) use (model KDP44)
Working Pressure (kPa abs {mmHg})

Wetted part:
133.3 tantalum
101.3
Operating Pressure (kPa abs)

Operable Range

66.7
53.3
Wetted Part:
40 133.3 {1000}
Tantalum
Operable Range

26.7 101.3 {760}

13.3
66.7 {500}
12
10.7
9.3
53.3 {400}
8
6.7 40.0 {300}
5.3
4
26.7 {200}
3.2
2.7
13.3 {100}
1.3
-40 0 40 80 120 -40 0 40 80 120
Temperature (°C) Temperature (°C)
Figure 6. Operating pressure and temperature of wetted parts for vacuum Figure 7. Operating pressure and temperature of wetted parts for vacuum
use (model KDP11/22/81/82) use (model KDP33)

3
No. SS2-KDP100-0100 Azbil Corporation
Model selection table
Basic model No. Optional spec. Add'l spec.
− −

Measuring High differential pressure model: from 0–25 to 0–500 kPa KDP11
span Medium differential pressure model: KDP22
from 0–2.5 to 0–53.9 kPa
Low differential pressure: from 0–0.5 to 0–6 kPa KDP33
Very low differential pressure: from 0–0.1 to 0–1.2 kPa KDP44
High-pressure resistant, high diff. pressure: KDP81
from 0–25 to 0–500 kPa
High-pressure resistant, medium diff. pressure: KDP82
from 0–2.5 to 0–53.9 kPa
−
Material Flange cover material Wetted parts material
High pressure side Low pressure side High pressure– Low pressure–
receiving part receiving part
SF440A SF440A SUS316 SUS316 1 1 2 2
*1 SF440A SF440A SUS316L SUS316L 1 1 8 8
SUS316 SUS316 SUS316 SUS316 2 2 2 2
*1 SUS316 SUS316 Nickel copper alloy Nickel copper alloy 2 2 3 3
*1 SUS316 SUS316 Tantalum Tantalum 2 2 4 4
*1 SUS316 SUS316 SUS316L SUS316L 2 2 8 8
*2 Nickel copper alloy Nickel copper alloy Nickel copper alloy Nickel copper alloy 3 3 3 3
*2 PVC PVC Nickel copper alloy Nickel copper alloy 5 5 3 3
*2 PVC PVC Tantalum Tantalum 5 5 4 4
Air supply Rc 1/4 A
connection NPT 1/4 female thread B
Pressure unit kgf/cm2: 0.2 to 1.0 kgf/cm2 *3 1
/ signal air psi: 3 to 15 psi *3 2
pressure
bar: 0.2 to 1.0 bar *3 3
Pa: 20 to 100 kPa 4
Pa: 19.6 to 98.1 kPa (0.2 to 1.0 kgf /cm2 or equivalent) 8
−
Additional None X
specifications Elevation 5
Suppression 6
Pressure Regulator with air filter (RA1B) R
High-accuracy type *4 H
*1. This option cannot be selected for the KDP44.
*2. This option cannot be selected for the KDP44/81/82.
*3. Non-SI units can only be used outside of Japan.
*4. This option cannot be selected for the KDP33/44/81/82.

4
Azbil Corporation No. SS2-KDP100-0100
Dimensions
Model KDP11/22
 (Unit: mm)

5
No. SS2-KDP100-0100 Azbil Corporation
Model KDP33
 (Unit: mm)

6
Azbil Corporation No. SS2-KDP100-0100
Model KDP44
 (Unit: mm)

7
 No. SS2-KDP100-0100 Azbil Corporation
Model KDP81/82
 (Unit: mm)

Please read “Terms and Conditions” from the following URL

before ordering and use.
https://www.azbil.com/products/factory/order.html
Specifications are subject to change without notice.

1-12-2 Kawana, Fujisawa

Kanagawa 251-8522 Japan
https://www.azbil.com/
1st edition: June 2022
No part of this publication may be reproduced or duplicated
8 without the prior written permission of Azbil Corporation.
(16)