Marigold-D

Rev 2.0

1 of 27
 Marigold-D

CONTENTS

1. Revisions of History -------------------------------------------- 3

2. General Descriptions -------------------------------------------- 4
3. Features -------------------------------------------- 4
4. Block Diagram -------------------------------------------- 5
5. Outline Dimensions -------------------------------------------- 6
6. Connectors Information --------------------------------------------- 8
7. Reference Data ------------------------------------------- 14
8. Supported Input Formats --------------------------------------------- 15
9. OSD --------------------------------------------- 16
10. RS-232 communication --------------------------------------------- 24

The information presented in this document may form a part of quotation or contract under the
agreement of both parties. Otherwise, this datasheet is subject to change without prior notice.

2 of 27
 Marigold-D

1. Revisions of History
Revision No. Date Page Description
Ver. 1.0 Jan.16 All First Draft, Preliminary Specification
Ver. 1.1 Jan. 28 16~24 Added OSD information.
Ver. 1.2 Apr. 07 4, 20~24 Updated temp range and OSD menus
Ver. 1.3 Mar. 15 ‘17 11,13 Added J108 information
Ver. 1.4 Aug ‘17 13 Make Correction typo J110
Ver. 1.5 Oct 26 26 Added Light Sensor Commands
Ver. 1.6 Apr. 18 26 Added Light Sensor Commands
Ver. 1.7 Jun. 18 14 Updated Max Power rating
Ver. 1.8 Sep 7 ’18 17 Added 6key OSD board information.
Ver. 1.9 Mar, 11 ‘19 All Assigned new design template
Ver. 2.0 Jun, 22 ‘21 14 Added Power Consumption

3 of 27
 Marigold-D

2. General Descriptions

Marigold-D is an advanced TFT-LCD Monitor Control Board. This design enables a full
conventional CRT monitor and/or video replacement with a large size Active Matrix LCD module.
It is suitable for video resolution up to WUXGA @ 60Hz(1080 vertical by 1920 horizontal pixel array)
in all video modes, the full display area of the module is used.
design is implemented as a single printed circuit board.

Marigold-D is designed to support various TFT-LCDs up to WUXGA resolution by Firmware option.

3. Features
• Designed to give state-of-the-art picture quality
• Analog RGB / DVI (Digital Video Interface), and DisplayPort.
• Analog Audio In, and SPDIF through DisplayPort.
• Various input combination, e.g., PC monitor only
• Full CRT multi-sync monitor compatibility
• Multi-sync capability up to WUXGA resolution @ 60Hz, compatible standard SVGA, XGA and
SXGA VESA timing.
• Expand DOS,VGA,SVGA,XGA, SXGA,UXGA and full HD to full screen display
• True color (16.7M) data processing and display driving
• Single control operated & transparent On-Screen-Display (hereafter ‘OSD’) user interface
• Full control of all relevant display and interface parameters via OSD
• VESA DDC 1/2B compliant
• Compatible with VESA DPMS power saving modes
• Form factor: 100mm (L) x 150mm (W) x 19mm(H)
• +12V or +24V DC single power
• Operating temperature: -20C to 70C

4 of 27
 Marigold-D

4. Block Diagram

2.5V DC
3.3V DC LED driver
12V DC Regulator 5.0V DC Backlight
I/F
or 12V DC Control
24V DC

Red
Green
8bitx3 ADC
Blue
Sync

LCD I/F
LVDS

DVI Scaler
(Embedded MCU)

Displayport

OSD I/F
Debug
I/F
(RS-232)

DDC DDC ROM x2 Flash

Memory NVM
ESTECOM Internal Usage

5 of 27
 Marigold-D

5. Outline Dimensions
5.1 Standard Connectors with Special Power CNT 4P angle (3.96mm pitch)

Dimension : 100mm (L) x 150mm (W) x 19mm(H)

6 of 27
 Marigold-D

5.2 Actual connecters location

Analog, DVI, Displayport and interface connector

LVDS output Reserve CNT

Backlight 2

Reserve CNT
Backlight 1

Speaker
OSD

Power CNT DVI RGB Displayport Analog

Audio-in

RS232

Notification : Please notice to match the designated LCD panel VDD

jumper (3.3V/5V/12V)

7 of 27
 Marigold-D

6. Connectors Information

6.1 Input Connectors

Power Input Connector : DC12V Jack (P102)

Pin No. Symbol Description Pin No. Symbol Description

1, 2 GND GND 3 Vin +12V DC

Power Input Connector : Molex 5267-04 (J101)

Pin No. Symbol Description Pin No. Symbol Description

1 VCC POWER 3 GND GND

2 VCC POWER 4 GND GND

Power Input Connector (Alternative) : Hanlim LA1143_4(J105)

Pin No. Symbol Description Pin No. Symbol Description

1 VCC POWER 3 GND GND

2 VCC POWER 4 GND GND

Power Input Connector (Alternative) : Molex 5569-04A4(J113)

Pin No. Symbol Description Pin No. Symbol Description

1 GND GND 3 VCC POWER

2 GND GND 4 VCC POWER

8 of 27
 Marigold-D

Analog RGB Input Connector : Mini D_Sub 15pin(P105)

Pin No. Symbol Description Pin No. Symbol Description

1 RED Analog Red 9 NC +5V DC
2 GREEN Analog Green 10 SGND Sync GND
3 BLUE Analog Blue 11 NC No Connection
4 GND No Connection 12 SDA DDC Serial Data
5 GND Digital GND 13 HSYNC Horizontal Sync
6 RGND Red Return 14 VSYNC Vertical Sync.
7 GGND Green Return 15 SCL DDC Data Clock
8 BGND Blue Return

DVI-D Input Connector : DVI-D (P107)

Pin No. Symbol Pin No. Symbol Pin No. Symbol

1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1- 17 T.M.D.S. Data 0-

2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+

T.M.D.S. T.M.D.S. T.M.D.S. Data 0/5

3 11 19
Data2/4 Shield Data1/3 Shield Shield

4 T.M.D.S. Data 4- 12 T.M.D.S. Data 3- 20 T.M.D.S. Data 5-

5 T.M.D.S. Data 4+ 13 T.M.D.S. Data 3+ 21 T.M.D.S. Data 5+

6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield

Ground
7 DDC Data 15 (Return for +5V, H- 23 T.M.D.S. Clock+
Sync, and V-Sync)

8 N/C 16 Hot Plug Detect 24 T.M.D.S. Clock-

9 of 27
 Marigold-D

Displayport Input Connector : xxx SGDF-0199 (P103)

Pin No. Symbol Pin No. Symbol Pin No. Symbol

1 LANE 3- 8 GND 15 AUX CH+

2 GND 9 LANE 1+ 16 GND

3 LANE 3+ 10 LANE 0- 17 AUX CH-

4 LANE 2- 11 GND 18 HPD

5 GND 12 LANE 0+ 19 Return

6 LANE 2+ 13 GND 20 DP Power

7 LANE 1- 14 C.E.C

OSD, LED Interface Connector : 53015-1210 made by Molex (J104)

Pin No. Symbol Description Pin No. Symbol Description

1 LED 1 LED 1 7 KEY2 Increase

2 LED 0 LED 0 8 KEY3 Decrease

3 Vcc Vcc 5V 9 KEY4 Down

4 IR Remote control 10 KEY5 Menu

5 GND GND 11 KEY6 Source Select

6 KEY1 Power 12 KEY7 Up

RS-232C Connector : : 53014-0410 made by Molex (J108)

Pin No. Symbol Description Pin No. Symbol Description

1 GND GROUND 3 Rx RxD

2 Tx TxD 4 VCC +5VDC

10 of 27
 Marigold-D

6.2 Output Connectors

LVDS Output Connector : 12507WR-30 Made by Yeonho(J107)

Pin No. Symbol Descripiton Pin No. Symbol Descripiton

1 Tx0-E Even data 16 Tx1+O Odd data

2 Tx0+E Even data 17 GND Return

3 Tx1-E Even data 18 Tx2-O Odd data

4 Tx1+E Even data 19 Tx2+O Odd data

5 GND Return 20 TxCLK-O Odd data
6 Tx2-E Even data 21 TxCLK+O Odd data

7 Tx2+E Even data 22 Tx3-O Odd data

8 TxCLK-E Even data 23 Tx3+O Odd data
9 TxCLK+E Even data 24 GND Return
10 Tx3-E Even data 25 3.3V LVDS option
11 Tx3+E Even data 26 GND Return
12 GND Return 27 VCC Module Power

13 Tx0-O Odd data 28 VCC Module Power

14 Tx0+O Odd data 29 VCC Module Power

15 Tx1-O Odd data 30 VCC Module Power

LVDS Output Connector : 12507WR-10 Made by Yeonho (J108)

Pin No. Symbol Description Pin No. Symbol Description

1 TxE4- Virtual 4th CH 6 NC No Connection

2 TxE4+ Virtual 4th CH 7 NC No Connection

3 TxO4- Virtual 4th CH 8 NC No Connection

4 TxO4+ Virtual 4th CH 9 NC No Connection

5 GND Return 10 GND Return

11 of 27
 Marigold-D

Backlight Connector : 53015-0810 made by Molex (J102)

Pin No. Symbol Description Pin No. Symbol Description

1 BRIGHT Brightness Adjustment 5 GND Ground

2 ON/OFF Backlight On/Off 6 GND Ground

3 GND Ground 7 12V 12V

4 5V 5V ( Not Use) 8 12V 12V

Backlight Power Connector : 53015-1010 made by Molex(J103)

( For Large size panel )

Pin No. Symbol Description Pin No. Symbol Description

1 VDD INV PWR 6 GND Ground

2 VDD INV PWR 7 GND Ground

3 VDD INV PWR 8 GND Ground

4 VDD INV PWR 9 GND Ground

5 VDD INV PWR 10 GND Ground

Speaker Output Connector : 53014-0410 made by Molex (J112)

Pin No. Symbol Description Pin No. Symbol Description

1 L- Speaker Left - 3 R+ Speaker Right +

2 L+ Speaker Left + 4 R- Speaker Right -

12 of 27
 Marigold-D

PC Sound Input Connector (P106) : xxx ST-351

Pin No. Symbol Description Pin No. Symbol Description

1 GND GROUND 3 L+ PC sound Left -

2 R+ PC sound Right + 4 GND GROUND

3 GND GROUND

Reserve Connector: 53014-1410 made by Molex (J111)

Pin No. Symbol Description Pin No. Symbol Description

1 GPIO1 General Purpose I/O 8 INT Interrupt

2 GPIO2 General Purpose I/O 9 VCC +5VDC

3 GPIO3 General Purpose I/O 10 PNL_PWR LCD panel power

4 GND GROUND 11 GND GROUND

5 ADC ADC 12 GND GROUND

6 SDA I2C 13 VDD +12VDC ~24VDC

7 SCL I2C 14 VDD +12VDC~24VDC

Light Sensor Connector : 53014-0510 made by Molex (J110)

Pin No. Symbol Description Pin No. Symbol Description

1 VCC +5VDC 4 GND GROUND

2 SDA I2C 5 VPP +3.3VDC

3 SCL I2C

13 of 27
 Marigold-D

7. Reference Data
Video Input Timing;

Supported vertical refresh rates for each modes are as follows:

640 x 350 70Hz 1280 x 768 60~75Hz

640 x 400 70Hz 1280 x 1024 60~75Hz
700 x 560 55~75Hz 1366 x 768 60~75Hz
720 x 350 70Hz 1440 x 900 60~75Hz
720 x 400 70Hz 1600 x1200 60~75Hz
640 x 480 60~75Hz 1680 x1050 60~75Hz
800 x 600 60~75Hz 1920 x1080 60Hz
1024 x 768 60~75Hz 1920 x1200 60Hz
1152 x 864 60~75Hz

Sync. : H/V Separated TTL, Composite Sync

Electrical Parameters Reference Marigold-D, tA 25 ° C

Symbol Description Min Type Max Unit

VDD +12V (+24V) DC Power Supply 10.8 12.0 26.5 V

V i(RGB) Video Input Signal (w.r.t. GND) 0.5 0.7 1.0 VPP

fS Video Sample Rate 80 MHz

f HS Horizontal Sync. Frequency 30 60 KHz

f vs Vertical Sync Frequency 56 75 Hz

F SIH Sync Input High Level 2.5 V

V SIL Sync Input Low Level 0.8 VDC

IDD2 Supply Current +12V (with LCD & Inverter) 2.5 3 A

Note 1. Power consumption measuring condition is 2 pixel check board pattern @ SXGA 75Hz and maximum
brightness with AUO G190EG01 with embedded backlight at tA 25°C.

Power Consumption

Board with Panel

Board
Consumption Black Red Green Blue White Remark
alone
Pattern Pattern Pattern Pattern Pattern

Input Voltage [V] 12 12 12 12 12 12 - Panel : P215HVN 01.0 [AUO]

- F/W : FWR0121-2.80ES
Current [mA] 20 145 145 146 146 150 - Brightness : 100
- Contrast : 50
Power [W] 0.24 1.74 1.74 1.752 1.752 1.8 - 1ea DP input

14 of 27
 Marigold-D

8. Supported Input Formats

8.1 Video Mode Support
Marigold-D series can support any video mode within the following input constraints:
• Signal sample frequency with the input  80MHz
• Horizontal sync frequency between 30KHz and 80KHz

Modes are detected with the presentation of the input and previous alignments for setup are
Automatically recalled. The emulation of a true multi-sync monitor is implemented.
The factory preset supported modes are as follows:

Mode Resolution Refresh rate H-freq. Pixel freq. Remarks

VGA 640 x 350 70Hz 31.47KHz 25.175MHz VESA Standard

VGA 720 x 400 59.940HZ 31.469KHZ 25.175MHZ IBM VGA 3H

VGA 640 x 480 60Hz 31.5KHz 25.175MHz Industry Standard

VGA 640 x 480 72Hz 37.9KHz 31.500MHz VESA Standard

VGA 640 x 480 75HZ 37.5KHZ 31.500MHZ VESA Standard

SVGA 800 x 600 60Hz 37.9KHz 40.000MHz VESA Guidelines

SVGA 800 x 600 72Hz 48.1KHz 50.000MHz VESA Standard

SVGA 800 x 600 75HZ 46.9KHZ 49.500MHZ VESA Standard

XGA 1024 x 768 60Hz 48.4KHz 65.000MHz VESA Guidelines

XGA 1024 x 768 70Hz 56.5KHz 75.000MHz VESA Standard

XGA 1024 x 768 75HZ 60KHZ 78.750MHZ VESA Standard

SXGA 1280 x 1024 60Hz 64KHZ 108.000 MHZ VESA Standard

SXGA 1280 x 1024 75HZ 80KHZ 135.000 MHZ VESA Standard

WXGA 1280 x 768 60~75Hz 47.7~65KHZ 80.140 MHZ Not Standard

WXGA 1366 x 768 60~75Hz 47.7~65KHZ 80.000 MHZ Not Standard

WSXGA 1440 x 900 60~75Hz 65KHZ 150.000 MHZ Not Standard

WSXGA 1680 x1050 60Hz 70KHZ 150.000 MHZ Not Standard

WUXGA 1920 x1080 60Hz 95KHZ 190.000 MHZ Not Standard

Notes:
1. All mentioned modes are non-interlaced. The maximum and minimum frame rates are determined by the TFT-LCD.
2. Factory preset modes are overwritten by additional user alignments for automatic recall. The factory preset modes
can be recalled at any time.

15 of 27
 Marigold-D

9. OSD (On Screen Display)

9.1 OSD Board Dimension

9.1.1 OSD Board with 7 Buttons Part number : SGLM0000700

MENU / DOWN / UP / DECREASE/ INCREASE/ SOURCE /POWER

(LEFT) (RIGHT)

16 of 27
 Marigold-D

9.1.2 OSD Board with 6 Buttons Part number : SGLM0000600

MENU / DOWN / DECREASE/ INCREASE/ SOURCE/ POWER

(LEFT) (RIGHT)

17 of 27
 Marigold-D

9.1.3 OSD Key Description

• MENU : Menu Key

• DOWN : Down Key
• UP : Up Key
• DECREASE : Enter to Sub menu ,Decrease Key or Left Key
• INCREASE : Enter to Sub menu, Increase Key or Right Key
• SOURCE : Source Select OSD On key

9.1.4 Hot Key Description

• MENU : Menu Popup / Menu exit

• DOWN : Auto adjustment, VGA only
• UP : Brightness menu popup.
• DECREASE : Contrast menu popup.
• INCREASE : Volume menu popup.

18 of 27
 Marigold-D

9.2 Summary of OSD Menu

Brightness /
Brightness
Contrast
9300K
Contrast
6500K
5700K Red
sRGB Green
Color Settings Color Temp. User Color Blue
Hue
Saturation On
HDMI Full Range Off

Input Source VGA

HDMI/DVI
Displayport

Full

Aspect Ratio 4:3

Display Settings
H-Position

V-Position
Sharpness
Clock
Phase

19 of 27
 Marigold-D

Other Settings Volume

OSD H-Position

OSD V-Position

OSD Timeout
Factory Reset

Information Information of the input source

Firmware Version display

[Note]

: Adjustment does not available.

Auto Adjust This function activated when VGA input

20 of 27
 Marigold-D

9.3 OSD menu enables user to manipulate the image & settings

Brightness/Contrast Brightness 100

Color Settings Contrast 50

Input Source

Display Settings

Other Settings

Information

Auto Adjust

Brightness/Contrast Color Temp 5700K

Color Settings Red 50

Input Source Green 50

Display Settings Blue 50

Other Settings 50

Information 50

Auto Adjust

21 of 27
 Marigold-D

Brightness/Contrast Auto Select

Color Settings • VGA

Input Source HDMI/DVI

Display Settings Displayport

Other Settings

Information

Auto Adjust

Brightness/Contrast Aspect Ratio Full

Color Settings H.Position 50

Input Source V.Position 50

Display Settings Sharpness 50

Other Settings Clock 50

Information Phase 21

Auto Adjust

22 of 27
 Marigold-D

Brightness/Contrast Volume 50

Color Settings OSD H.Position 50

Input Source OSD V.Position 50

Display Settings OSD Timeout 10

Other Settings Factory Reset

Information

Auto Adjust

Brightness/Contrast Resolution: 1920 x

1080
Color Settings H.Freq: 68KHz

Input Source V.Freq: 60Hz

Display Settings V.Total: 1 1 2 5 Lines

Other Settings Color Format: RGB

Information

Auto Adjust

FWR 0XXX – Y.YYZZ

23 of 27
 Marigold-D

Brightness/Contrast

Color Settings

Input Source

Display Settings

Other Settings

Information

Auto Adjust

Input Source

Auto Select
VGA
HDMI / DVI
DisplayPort

User has an option selectable Auto source function and Manual source function.
This pop up message will comes on when user press “Source” button on OSD board.

24 of 27
 Marigold-D

10 . RS-232 communication protocol.

10.1 Purpose
To control monitor remotely by RS-232 protocol.

10.2 Command Length

- LENGTH : 5 bytes

10.3 Check Sum

- SUM of each byte : FF

10.4 Definition of byte

AA BB CC DD EE
AA : Start string of MariGold-D RS-232 commands.
BB : String of command function.
CC : String of Set or Get value
DD : Blank string, normally“00”
EE : added string to meet checksum “FF”. (AA+BB+CC+DD + EE) = FF

10.5 Baud rate

- Must be set 9600 rate

25 of 27
 Marigold-D

10.6 RS-232 communication protocol.

Function Command Description

Menu BF 06 00 00 3A Menu Popup

Down BF 09 00 00 37 Auto adjust Hot key
UP BF 04 00 00 3C Brightness Hot key
Decrease BF 05 00 00 3B Contrast Hot key
Increase BF 07 00 00 39 Volume Hot key
Source BF 08 00 00 38 Source select key
Power BF 00 00 00 40 Power key

Source change VGA BF 0A 00 00 36 Direct command

Source change HDMI/DVI BF 0B 00 00 35 Direct command
Source change Displayport BF 0C 00 00 34 Direct command

Get Brightness BF 01 00 00 3F
Incresing Brightness BF 2D 00 00 13
Decresing Brightness BF 03 00 00 3D
Get Contrast BF 0F 00 00 31
Incresing Contrast BF 2E 00 00 12
Decresing Contrast BF 11 00 00 2F

Power Off BF 31 00 00 0F
Power On BF 32 00 00 0E
Backlight Off BF 33 00 00 0D
Backlight On BF 34 00 00 0C
Get Backlight status BF 35 00 00 0B

Place Factory reset BF 30 00 00 10

Get Input Source status BF 1E 00 00 22
Get Power status BF 1F 00 00 21

26 of 27
 Marigold-D

Function Command Description

Get PC Red Color Value BF 13 00 00 2D

Get PC Green Color Value BF 14 00 00 2C
Get PC Blue Color Value BF 15 00 00 2B
Set PC Color Temp (increase) BF 16 00 00 2A 0-1-2-3-4
Set PC Color Temp (decrease) BF 17 00 00 29 4-3-2-1-0
0: Cool, 1: Normal, 2: Warm, 3: sRGB, 4: User

Increse PC RED color value BF 18 00 00 28

Decrease PC RED color value BF 19 00 00 27
Increse PC Green color value BF 1A 00 00 26
Decrease PC Green color value BF 1B 00 00 25
Increse PC Blue color value BF 1C 00 00 24
Decrease PC Blue color value BF 1D 00 00 23

Set Brightness value BF 02 1E 00 20 Brightness 30

BF 02 38 00 06 Brightness 56
BF 02 5D 00 E1 Brightness 93
Set Contrast value BF 10 00 00 30 Contrast 30
BF 10 23 00 0D Contrast 35
BF 10 5A 00 D6 Contrast 90

Get AutoDimm BF 2A 00 00 16
Set AutoDimm BF 2B 00 00 15 Set AutoDimm OFF
BF 2B 01 00 14 Set AutoDimm 3STEP
BF 2B 02 00 13 Set AutoDimm 5STEP
BF 2B 03 00 12 Set AutoDimm ALL
Get LightSensor Brightness Min value BF 36 00 00 0A
Set LightSensor Brightness Min value BF 37 00 00 09
Get LightSensor Brightness Max value BF 38 00 00 08
Set LightSensor Brightness Max value BF 39 00 00 07
Get LightSensor Now value BF 3A 00 00 06

27 of 27