Tensile Testing machines to conduct PSA tests

Option 01:HD-B602 universal test machine ,HAIDA international(China)

features
industrial design for easy to placement and movement. This
universal test equipment uses the LED control system and can
print the test data graph in time.

Design standard-ASTM,JIS,CE, ISO,EN,BS EN,SAE,FTM…

Specialy designed for Adhesives Tape/Pressure Sensitive Tape
• EN 1719: Loop Tack Test
• ASTM D3654: Shear Adhesion Test
• ASTM D3759: Tensile &Elongation Test
• FTM: 180&90 Degree Peel Test, Loop Tack
• EN 1939, ASTM D3330: 180&90 Degree Peel Test
• ISO 11339, ASTM D1876, ASTM F2256: T-type Peel Test
 specifications for HD-B602
item specification
Frame capacity 200kg
Load cell brand China brand, 200kg (5,10,50,100kg are optional)

Load accuracy 1% F.S

Printing Built-in Printer
Control system Controller with LED
Motor Adjustable-speed motor, ball screw rod
Force reading KG/N/LB
Vertical test space 900mm including fixture
Test speed 50~300mm/min (adjustable by rotary knob)
Software TM 2101
Data display Max. break force
Safety features Over-load protection
Upper and lower limit switches
Load sensor with automatic retreat
Option 02: HD-B609B-S universal test machine ,HAIDA international(China)

features

• Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan).

• Control system: a computer control with TM2101software;b, Back to origin

automatically after the [Link] transmission: RS232.

• Displacement resolution: 0.001mm.

• Graph scale automatic optimization can make a graph to display with the best
measurement and can implement graphics dynamic switching in the test and has force-
elongation, force-time, elongation-time, and stress-strain.

• It can save results automatically after the test is finished, and it is manual filing. It can
display maximum force, yield strength, compressive strength, tensile strength,
elongation, peel interval maximum, minimum, and average, etc.

• Users can set parameters of product materials such as length, width, thickness, radius,
area, and so on.
 specifications for HD-B609B-S
Item specification
Frame capacity 200kg
Germany brand load cell for high accuracy,200kg
(5,10,50,100kg are optional)

Load accuracy 0.5% F.S

Control system 400w servo actuator
Motor Panasonic servo motor w/AC variable speed drive
system, high-precision mechanical ball screw rod

Force reading kgf, Ibf, N, KN, T etc

Vertical test space 900mm including fixture
Software TM 2101
Curves display Load- elongation, Elongation-time, Time-
elongation, Stress-strain
Data display Max. force, speed, sample information,
strength(Kpa, Mpa, N/mm, N/mm2) etc…
Safety features E-Stop
Over-load protection
Upper and lower limit switches
Load sensor with automatic retreat
Option 03: HD-B609C-S universal test machine,HAIDA international(China)

features
 professionally suitable for releases stretching, peeling, deformation, tearing,
bonding, piercing force, opening force, low-speed unwinding force, pull-out
force and other performance tests of plastic films, protective film, composite
materials, flexible packaging materials, plastic hoses, adhesives, adhesive
tapes,Stickers, medical patches, medical equipment, combination cover, metal
foil, diaphragm, backing material, non-woven fabric, rubber, paper and so on
products.

 Standards
TAPPI-T804, JIS-20212, GB4857.3.4, ASTM-D642, QB/T1048, BS EN ISO 12048,
GB/T4857.16, GB/T8167, GB/T8168, GB/T4857.3, GB/T4857.4

 high-quality components to make the low viscosity test data more accurate and
reduce errors.
 Limit protection, overload protection, automatic return, and other intelligent
design to ensure safe operation.
 provide customized services to meet different users Test requirements.
 specifications for HD-B609C-S

Item Specification
Capacity 5kg Transcell load cell(USA)(1kg-5kg)
Motor 400w Panasonic servo motor
Driver 400w Panasonic servo driver
Screw Ball screw
Control mode Computer & Software
Speed 0.1-500mm/min, adjustable
Stroke 900mm(excluding fixture)
Load resolution 1/250,000
Load accuracy ≤0.5%
Unit gf/kgf/N//kN/LBf/T
Circuit board HD-002-A
Option 04:C610H Auto Tensile Tester,LABTHINK INSTRUMENT(china)

features

 can be measured Shearing Test,Test of Tensile Strength and

Elongation Rate,Test of Tensile Strength at Break,Tear Resistance
Test,Heatseal Strength Test,90 Degree Peel Test,180 Degree Peel
Test,Tensile Strength Test at Defined Elongation

 standard method
ASTM E4, ASTM D882, ASTM D1938, ASTM D3330,ASTM F88

 Multiple independent test modes including tensile test, peel test,

tearing test, heat seal test, tensile test at fixed elongation, and
compression test.

 The instrument supports bidirectional testing modes and test

speed can be adjusted freely.

 Intelligent designs of over-travel protection, overload protect and

automatic position reset guarantee safe test operation of the
users.
 specifications for C610H Auto Tensile Tester

Item specification
Load Cell Capacity 500 N (standard)
50 N, 100 N, 250 N, 1000 N (optional)

Accuracy ±0.5% of indicated value (2%FS~100%FS)

±0.01%FS (0% ~ 2%FS)

esolution 0.001 N
Test Speed 0.05 ~ 500 mm/min
Speed Accuracy ±0.5% of indicated value (1%~100% of maximum speed)
Number of Specimens 1

Specimen Width 30 mm (Standard Grip)

50 mm (Optional Grip)

Clamping Way Pneumatic Specimen Clamp

Gas Supply Air (outside of supply scope)
Gas Supply Pressure 0.5 MPa~ 0.7 Mpa (72.5psi～101.5psi)
Stroke 1000 mm
Power Supply 220VAC±10% 50Hz
Option 5-XLW (PC) Auto Tensile Tester,LABTHINK INSTRUMENT(china)

features
• 7 independent test modes are available, including
tensile strength, peeling force, tearing force and other
force properties of flexible package

• The instrument is controlled by micro-computer with

menu interface, PVC operation panel and large LCD
display

• Professional operating software support statistical

analysis of group specimens, superposition analysis of
test curves and historical data comparison functions

• standards
• ASTM E4, ASTM D882, ASTM D1938, ASTM D3330,
ASTM F88, ASTM F904

• Shearing Test,Test of Tensile Strength and Elongation

RateTest of Tensile Strength at BreakTear Resistance,
TestHeat Seal Strength Test,180 Degree Peel Test
 specifications for XLW (PC) Auto Tensile Tester

item specification
Load Cell Capacity 500 N (standard) 50 N, 100 N, 250 N (optional)

Accuracy 0.5% FS
Number of Specimens 1
Test Speed 50, 100, 150, 200, 250, 300, 500 mm/min
Specimen Width 30 mm (Standard Grip)
50 mm (Optional Grip)
Stroke 1000 mm
Instrument Dimension 450 mm (L) x 450 mm (W) x 1410 mm (H)
Power Supply 220VAC 50Hz / 120VAC 60Hz
Net Weight 68 kg