Lists of Repair

Instructions for
COMPUR-Shutters and
for COMPUR
Quick-Change Lens
Mounts.

1950 - 1970
 Section 01

Introduction
Contents
 COMPUR

Reparaturanleitungen fir

COMPUR-VERSCHLUSSE und

COMPUR-WECHSELFASSUNGEN

Lists of Repair Instructions for COMPUR-Shutters

and for COMPUR Quick-Change Lens Mounts.

cOMPUR-+sWERK
- 8M UN CHEN 25
*72 May 1966

Indications for the use of the Compur manuals

SPARE PARTS LISTS AND REPAIR INSTRUCTIONS

1. Directions for Ordering Spare Parts

Owing to the great number and variety of shutter designs, it is in your own interest to use exclusively the
part designations found in our Spare Parts Lists and, in particular, the complete fourteen-digit stock numbers.
This is the only way to exclude errors and ensure rapid execution of your orders.
To find a spare part number, you should know the camera manufacturer, camera model and lens data. First
consult the Table: Camera/Lens/Shutter, which is arranged in the alphabetical order of the camera manufac-
turers. In the first three columns of this Table you will find camera model, lens data and the applicable Special
Shutter number (CS-number).
The Spare Parts Lists are subdivided into lists for Standard Shutters and Special Shutters, The Spare Parts Lists
for Standard Shutters are arranged according to Standard type numbers and those for Special Shutters in
the alphabetical order of the camera makers’ names.
In the “Type” column of the Spare Parts Lists for Special Shutters you will find the Special Shutter number.
The so-called special parts, i.e. those parts only installed in that particular Special Shutter, are listed under
the heading “Description”. All other parts are covered by the Spare Parts Lists for the Standard types (CN-
number) referred to at the end of each Spare Parts List.
Should you be unable to trace the designation and number of a spare part accurately in the Spare Parts
Lists, please refer to the Illustration Plates mentioned in the Table: Camera/Lens/Shutter (see maximal of re-
pair-instructions). The illustrated parts are marked with a three-digit number. This number applies to the stand-
ard part shown in the illustration and to any possible special part which serves the same function. Once you
have found the three-digit number in the illustration, trace this number first in the “Illustration” column of
the Special Spare Parts List. If this number cannot be found there, the part is a standard part and must be
looked up in the Spare Parts List for Standard Shutters referred to at the end of each Spare Parts List for
Special Shutters.
The illustration of partly assembled shutters - mostly at the foot of the exploded views - bear numbers in
italics, referring to the various parts shown above. (See e. g. especially hanging of spring.)
The numbered items of the Supplement explain special points which have to be taken into consideration when
placing orders or making repairs. References to the various items will be found in the “Supplement” column
of the Spare Parts Lists and in the illustration plates in the form of encircled numbers or symbols (see below).
When ordering spare parts for Quick-Change Mounts, first consult the Table for Quick-Change Mounts. In the
“Type” column, trace the number of the quick-change mount that matches the lens concerned, which will give
you the Spare Parts List to be consulted. Please check whether the Quick-Change Mount is for a camera with
or without light value follow-up system (coupled exposure meter). (See illustrations, Specifications Sheet 3
ond 5).

Symbols in Spare Parts Lists

@ This part may differ from the standard version. Look up stock number in Special Shutter Spare Parts List.
x This part will not be supplied.
A\ This part must be ordered from the camera maker.
© This part must be ordered from the lens maker.
@ See Item 9 of the Supplement.
A, B or C indicates the tensioning pinion adjustment (see Repair Instructions page 1 and 2).

2. Repair Instructions and Lubrication Schedules

The Tables also contain under the headings “Repair Instruction” and “Lubrication Schedule” indications of the
applicable instructions for repair and lubrication of the shutter or Quick-Change Mount concerned, Please pay
very special attention to these points in order to ensure thorough and proper maintenance.
 March 1970

Repair Instruction — Table of contents

Issued

Specifications for COMPUR Shutters . Page 1 November 1956

Page 2 September 1962
Page 4 May 1962
Page 6 April 1960
Page7 February 1968
Page 8 February 1968
Page 9 November 1965
Page 10 November 1964
Page 11 November 1964
COMPUR Quick-Change Mounts Page 3 August 1957
Page 5 October 1965

Tables Camera/Lens/Shutter
Adox Dr. Schleussner-Fotowerke, Wiesbaden . August 1964
Agfa-Gevaert, Miinchen November 1964
Balda-Camera-Werk, Biinde (Westfalen) August 1964
Braun-Camera-Werk, Niirnberg December 1965
Diax-Camera-Werk, Ulm August 1964
Franka-Werke, Bayreuth August 1964
Graflex, Inc. Rochester 3, N. Y. December 1965
lloca-Camera-Wilheim Witt, Hamburg ‘August 1964
Kodak AG, Stuttgart December 1965
Linhof, Nikolaus Karpf KG, Manchen . May 1966
Linhof, Nikolaus Karpf KG, Minchen Suppl. Sheet 1 May 1966
Rollei-Werke, Franke & Heidecke, Braunschweig . June 1968
SEM Preciorec, Aurec He. Loire/Frankreich June 1966
Schneider, Bad Kreuznach » February 1966
Sinar-Fachkamera-Bau, Schafthausen/Schweiz December 1965
Various firms . December 1965
Voigtlander AG, Braunschweig. December 1965
Carl Zeiss, Oberkochen December 1965
Zeiss Ikon AG, Stuttgart December 1965

Illustrations Plates for Standard Shutters

SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 1 May 1956
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 2 May 1956
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 3 May 1956
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 4 October 1957
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 5 May 1956
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 6 May 1956
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 7 May 1956
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 8 October 1957
SYNCHRO-COMPUR 00-MXV Tensioning ring CN—1110—000 Plate 9 May 195%)
SYNCHRO-COMPUR 00-MXV Standard . CN—1110—010 Plate 1 Juni 1969
SYNCHRO-COMPUR 00-MXV Standard with light value % CN—1110-016 Plate 1 April 1960
follow-up system and with automatic depth-of-field indicator
SYNCHRO-COMPUR 00 MXV Standard with light walue CN—1110—018 Plate 1 April 1960
follow-up system and with automatic depth-of-field indicator
SYNCHRO-COMPUR 00-MXV Special model CN—1110—019 Plate 1 April 1960
with geared selector rings
SYNCHRO-COMPUR 00-MXV BH Reflex CN—1110—020 Plate 1 May 1956
Plate 2 September 1969
Plate 3 May 1956
SYNCHRO-COMPUR 00-MXV Reflex light value . CN—1110—024 Plate 1 April 1960
follow-up system and with automatic depth-of-field indicator
Plate 2 June 1969
Plate 3 June 1969
SYNCHRO-COMPUR 00-MXV Standard with CN—1110—025 Plate 1 April 1960,
light value follow-up system
SYNCHRO-COMPUR 00-MXV Standard with light value CN—1110—026 Plate 1 April 1960
follow-up system and with automatic depth-of-field indicator
SYNCHRO-COMPUR 00-MXV Wide . CN—1110—030 Plate 1 May 1956
Plate 2 June 1969
SYNCHRO-COMPUR 00-MXV Wide with . CN—1110—034 Plate 1+2 April 1960
light value follow-up system
 SYNCHRO-COMPUR 00-MXV Wide Reflexwith . . . . CN—1110—035 Plate 1 July 1969
light value follow-up system Plate 2 April 1960
Plate 3 April 1960
COMPUR00-XV . ee ee. CN-1112-004 Plate 1 September 1963
COMPUR-RAPID 00-XV Standard without. . . . . CN=1112-010 Plate 1 October 1957
tensioning ring
SYNCHRO-COMPUR 0-MXV GH Reflex 103... - . CN-1210-022 Plate 1 April 1967
SYNCHRO-COMPUR 0-MXV GH Reflex103.. . . . . CN-1210-022 Plate 2 October 1966
SYNCHRO-COMPUR 0-MXV GH Reflex103.. . . . . CN-1210-022 Plate 2a April 1967
SYNCHRO-COMPUR 0-MXV GH Reflex 103 - CN-1210-022 Plate 3 April 1967
SYNCHRO-COMPUR 0-MXV GH Reflex Quick-Change 107. CN—1210-040 Plate 1 May 1967
SYNCHRO-COMPUR 0-MXV GH Reflex Quick-Change 107. CN—1210—040 Plate 2 November 1966
SYNCHRO-COMPUR 0-MXV GH Reflex Quick-Change 107. CN—1210—041 Plate 1 April 1967
SYNCHRO-COMPUR 0-MXV GH Reflex Quick-Change 107. CN—1210—041 Plate 2 April 1967
SYNCHRO-COMPUR 0-MXV GH Reflex Quick-Change f:500 . CN—1210—047 Plate 1 April 1968
SYNCHRO-COMPUR 0-MXVwithblade. . . 0.) | CN-1210—051 Plate 1 June 1969
opening mechanism
SYNCHRO-COMPUR1-MX. 9. 2)... 7). .- CN-1807—000 Plate 1-8 December 1965
COMPUR-RAPIDOOO-X. . 2. . 1 eee . CN1914-000 Plate 1 November 1964
COMPUR-RAPIDOO-X. . . . . . . « ~ « CN-1914-000 Plate 2 January 1964
COMPUR-RAPIDOOO-X. . 2 . . . . . « . CN-1914—000 Plate 3 November 1964
COMPUR-RAPIDOOO-X. . 2. . 2 . . . « « CN-1914-000 Plate 4 November 1964
COMPURO0O-X . . foe oe eee CN+1915—001 Plate 1-3 December 1965
COMPUR 000-X Single-action shutter. . . . . . CN-1916-001 Plate 1 December 1965
COMPUR 000-X with wedge differentialand . . . . CN-1916—004 Plate 1 December 1965
film speed setting

Illustration Plates for Special Shutters

Zeiss Ikon AG, Stuttgart, SYNCHRO-COMPUR 00-MXV. . CS—1110—556 Plate 1+2 September 1963
Voigtlander, Braunschweig, SYNCHRO-COMPUR-X 00-XV . CS—1112—455 Plate 1 December 1965
Linhof, Miinchen, SYNCHRO-COMPUR 0-MXV Spezial . . CS—1210—604 Plate 1 October 1966
Linhof, Minchen, SYNCHRO-COMPUR 0-MXV Spezial . . CS—1210—604 Plate 2 October 1966
SYNCHRO-COMPUR 0-MXV op - + + « CS—1210—-660 Plate 1 December 1965
Linhof, Minchen, SYNCHRO-COMPUR O-MXV + + + + CS—1210-671 Plate 1+2 May 1970
Graflex, Rochester, USA, SYNCHRO-COMPUR 1-MX. . . CS—1307—607 Plate 1 December 1965
Rollei-Werke, Braunschweig, COMPUR-000-X Reflex . . CS—1912—206 Plate 1-6 June 1968
Agfa-Gevaert, Miinchen, COMPUR-000-X Reflex + + + CS—1914—102 Plate 1+2 November 1964
Kodak AG, Stuttgart, COMPUR-RAPID 000-X . + + + CS—1914—301 Plate 1 November 1964

Repair Instructions for Shutters

Page 1 May 1966
Page 3 May 1956
PageS October 1957
Page7 March 1968
Page 9 March 1968
Page 11 April 1960
Page 13 April 1960
Page 15 July 1966
Page 17 April 1960
Page 19 June 1966
Page 21 June 1966
Page 23 April 1960
Page 25 June 1963
Page 27 October 1964
Page 29 May 1966
Page 30 December 1965
Page 32 December 1965
Page 34 December 1965

Repair Instructions for Special Shutters

Page 1/S June 1963
Page 3/S June 1966
Page 5/S October 1964
Page 7/S December 1965
Page 9/S June 1968
Page 11/S April 1970
Page 13/S April 1970
 October 1973
Tables Lens/Quick-Change Mount
COMPUR Quick-Change Mount . . Page 1 March 1969
for SYNCHRO-COMPUR 00-MXV Wide
without light value follow-up system
COMPUR Quick-Change Mount. Page 2 March 1969
for SYNCHRO-COMPUR 00-MXV Wide- and
Wide-Reflex-Shutter with light value follow-up system

Illustrations Plates for Quick-Change Mounts

COMPUR Quick-Change Mount 00 CN—1111—-800 Plate 1-3 May 1966
(Form A/1,
A/2 and B)
COMPUR Quick-Change Mount 00 with automatic CN—1111-851 Plate 1 April 1969
depth-of-field indicator for Wide- and Wide- (Form A/1-K,
Reflex-Shutter with light value follow-up system A/2-K, B/1-K)
COMPUR Quick-Change Mount 00 with automatic CN—1111—-851 Plate 2 November 1965
depth-of-field indicator for Wide- and Wide-
Reflex-Shutter with light value follow-up system
COMPUR Quick-Change Mount 00 with automatic CN—1111-863 Plate 1 January 1965
depth-of-field indicator for Wide- and Wide- (Form C/1-K,
Reflex-Shutter with light value follow-up system C/2-k)
Plate 2 September 1969
COMPUR Quick-Change Mount 00 for CN—1111—-885/86 Plate 1 November 1965
Wide- and Wide-Reflex-Shutter with
light value follow-up system
COMPUR Quick-Change Mount for Messrs. Kodak os—1111-376 Plate 1 March 1969

Repair Instructions for Quick-Change Mounts

Page 1 June 1966
Page 3 April 1960
Page 5 October 1965
Lubrication Schedules for Quick-Change Mounts
COMPUR Quick-Change Mount 00 CN—1111—800 October 1957
COMPUR-Quick-Change Mount 00 CN—1111—851 January 1965

Lubrication Schedules for Shutters

SYNCHRO-COMPUR 00-MXV eN—1110-000 May 1956
SYNCHRO-COMPUR 00-MXV CN—1110—016/018 April 1960
SYNCHRO-COMPUR 00-MXV CN—1110—020/030 May 1956
SYNCHRO-COMPUR 00-MXV CN—1110-019/024/025/026 April 1960
SYNCHRO-COMPUR 00-MXV CN—1110-034/035 April 1960
COMPUR 00-XV . 4 CN—1112—004 June 1963
SYNCHRO-COMPUR GH Reflex 103 CN—1210—022 October 1957
SYNCHRO-COMPUR GH Reflex-Quick Change 107 CN—1210-040/041/042/047 July 1962
SYNCHRO-COMPUR 1-MX . CN—1307—-000 December 1965
COMPUR-RAPID and COMPUR 000- Xx CN—1914-000
CN—1915—001 } October 1964
CN—1916—001
SYNCHRO-COMPUR 00-MXV Special CS—1110—556 June 1963
SYNCHRO-COMPUR 0-MXV Special CS—1210—604 September 1966
SYNCHRO-COMPUR 0-MXV Special CS—1210-671 June 1963
COMPUR 000-X Reflex Special CS—1912—206 June 1968

Supplement to Spare Parts Lists

Point 1to 16 Sheet 1 June 1966
“ 47t0 33 Sheet 2 ae
“ 34to 51 Sheet 3 a
" 2t0 70 Sheet 4 July 1973
“710 82 Sheet 5 ae
“~ B6to 98 Sheet 6 oe) ot
“99 t0 108 Sheet 7 a
“409 to 117 Sheet 8 ae =f
“418 to 122 Sheet 9 ae
“423 t0 133 Sheet 10 ree
“134 to 136 Sheet 11 ie te
“437 to 143, Sheet 12 Sh we
"144 to 146 Sheet 13 iy

The manual “Spare Parts Lists“ contains:

Parts lists for standard shutters, Parts lists for special shutters,
Parts lists for quick-change mounts, Tool lists, Supplements.