Trap Sizes and Seal Depths Guide
Trap Sizes and Seal Depths Guide
MINIMUM TRAP SIZES AND SEAL DEPTHS: COMMON BRANCH DISCHARGE PIPES (Unventilated): Building Envelope Areas: NEW ELEMENTS - TERRYS STONE COTTAGE - DRY STORE.
ALL DIMENSIONS AND AREA'S ARE TO BE CHECKED AND VERIFIED ON SITE ANY Floors:
Appliance: Diameter of trap Depth of seal Appliance: Max no. to be Max length of Min size of Gradient limits Description: Area: ELEMENT: U-VALUE: CONSTRUCTION:
DISCREPANCIES ARE TO BE REPORTED BACK TO GUIDING LIGHT ARCHITECTURE FOR (mm) (mm of water connected branch pipe (m) pipe (mm) (mm fall per FFL 00.000 FFL denotes finished floor level.
or equivalent) metre) Ground Floor Slab N/A 125mm Concrete topping to be confirmed by specialist floor
DRAWING AMENDMENTS. SSL 00.000 SSL denotes structural slab level if any. 41.2
(P/A = 98.7 = 0.41) contractor on 2000 gauge damp proof membrane on 250mm
ALL DIMENSIONS FOR DOOR AND WINDOW OPENINGS ARE SHOWN TO STRUCTURAL Washbasin 1 WC outlet > 80mm 8 15 100 18 2 to 90 Perimeter of GF Internal Wall 41.2m deep Precast Concrete Hollowcore flooring planks laid in
OPENINGS AND DO NOT INCLUDE FOR ANY EXTERNAL OR INTERNAL FINISHES SUCH Bidet 32 75 WC outlet < 80mm 1 15 75 3 18 to 90 Denotes direction of floor joists above. accordance with Structural Engineers design and details.
AS RENDERS OR PLASTERBOARDS. (No Insulation).
Bath 2 Urinal - bowl 31 50 Gross Internal Area (GIA) 98.7m² Ceilings:
Shower 2 40 50 Urinal - trough 31 65 18 to 90 Ground Floor. (1062 sq ft) 3000 Intermediate N/A 25mm Tongue & grooved chipboard on Ayrshire Metal Ltd
THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH ALL OTHER DRAWING NO'S Denotes ceiling height.
Urinal - slab 31 Floors: CJ22015 c-section floor joists at 600mm ctrs with tie rods at
STARTING WITH THE PREFIX No: 2404-157. Food waste disposal unit Gross Internal Area (GIA) 103.7m² Windows: midspan, supported on the steelwork frame, service void
Urinal bowl Washbasin or bidet 3 1.7 30 18 to 22 First Floor. (1116 sq ft) between and finished with Gyproc CasoLine MF ceiling
Sink WG-000 Denotes new window reference number.
1.1 30 18 to 44 system including 1 layer of 12.5mm Gyproc FireLine (60min)
FOR ALL FOUNDATIONS, GROUND FLOOR SLABS & STRUCTURAL DETAILS AND DESIGN Washing machine 2 Total (GIA) 1 202.4m²
0.7 30 18 to 87 Denotes floor level. fire resistance.
PLEASE REFER TO DRAWINGS AND DOCUMENTS PROVIDED BY THE STRUCTURAL Dishwashing machine 2 40 75 (2178 sq ft)
3.0 40 18 to 44 CH=0000 CH = Cill to Head Height (Structural Opening).
ENGINEER. PLEASE NOTE DUE TO BOUNDARY CONDITIONS IN RELATION TO FIRE FC = Floor to Cill Height. External Walls: N/A Wall below DPC consisting of 100mm Red Engineering
WC pan - outlet <80mm 75 50 4 4.0 50 18 to 44 Notes: FC=0000
SPREAD, THE FRAME MUST BE DESIGNED TO SCI PUBLICATION P313. 1) Total (GIA) area does not take into account any
(To DPC Only) A
brickwork, 125mm cavity with concrete infill below dpc level,
WC pan - outlet >80mm 100 50 Notes: Doors: 140mm Hemelite Standard 7.3N aggregate inner leaf
cold roof space within the building.
1) Should be as short as possible to prevent deposition. blockwork.
FOR ALL GROUND LEVELS AND BELOW GROUND DRAINAGE PLEASE REFER TO Notes: 2) The building volume calculation shown above
DG Denotes floor level.
2) May be reduced to 9mm on long drain runs where space is restricted, but only if more than 1 WC is does not take into account the intermediate floor
DRAWINGS AND DOCUMENTS PROVIDED BY THE CIVIL'S ENGINEER. 1) The depth of seal may be reduced to 50mm only with flush connected. 000 Denotes new door reference number.
External Walls: 0.19 W/m² K Kingspan Quadcore AWP Insulated wall panels, horizontally
grated wastes without plugs on spray tap basins. construction depths. Sheeting. laid, 100mm core insulation thickness,
3) Not recommended where disposal of sanitary towels may take place via the wc, as there is an
2) Where these appliances discharge directly to a gully the increased risk of blockages. FD30S 30min fire resistant door with intumescent strips Overall Panel thickness = 100mm, Colour: White.
FOR MECHANICAL & ELECTRICAL INFORMATION PLEASE REFER TO DRAWINGS AND and smoke seals. (SC) self closing mechanism. RAL 9003, BS 00E55. Fixed back to cold rolled secondary
depth of seal may be reduced to not less than 38mm. 4) Slab urinals longer than 7 persons should have more than one outlet. VP B
DOCUMENTS PROVIDED BY M&E CONSULTANTS, TO INCLUDE BOILER & MECHANICAL 3) Traps used on appliances with flat bottom (trailing waste steel, with 140mm thick Hemelite Standard aggregate (7.3
EXTRACT (mef) POSITIONS (I.E FLOOR OR WALL MOUNTED). Vision panel min zone of visability 500mm - N/mm²) blockwork inner leaf at ground floor level, timber stud
discharge) and discharging to a gully with a grating may have a
150mm from floor level. partition walling at first floor level.
reduced water seal of not less than 39mm..
Section Reference:
GF Partition Walls: N/A 140mm Hemelite Standard aggregate (7.3 N/mm²) or similar
Section reference number. C
A-A lambda (0.15) blockwork with 12.5mm Gyproc Wallboard or
000 Denotes drawing number. similar approved on dabs & 3mm skim coat plaster finish.
Internal Partition N/A 130mm thick timber frame partition wall consisting of
Drawing Reference: D
Walls: (Timber)
100
47x100mm s/w timber studs @ 400mm centres, built off
000 Drawing reference number. 60min fire rated. 47x100mm timber sole plate. 1no: layer of 12.5mm Gyproc
100mm thick red engineering
FireLine plasterboard & 3mm skim coat plaster finish on
brick below dpc to continue below Wall ties @ 450mm ctrs vertically habitable sides of the timber frame with 75mm acoustic
125
external ground levels by 150mm & 450mm ctrs horizontally & insulation between studs. All sanitary fittings including grab
000-00 Drawing and detail number.
(min) all subject to existing 225mm ctrs @ jambs, not less
rails etc to be fixed back to minimum 12mm marine plywood
external ground site levels. prior to applying the plasterboard finishes.
than 275mm in length all to
140
manufacturers recommendations. Pitched Roof 0.15 W/m²K Kingspan QuadCore® KS1000RW Roof Panel,
120mm core insulation thickness,
Overall Panel thickness = 151mm, Colour: Goosewing Grey
RAL 080 70 05, BS 10A05.
Ancon or similar steel frame All roofing panels fixed back to cold rolled secondary steel.
ties to manufacturers details. Structural steel columns by steel
sub-contractor, complete with British Windows 1.4 W/m² K All new windows to be PPC Aluminium framed, double glazed.
100 125 140 (or better) All glazing to be Pilkington K hard coat low e glass or similar
Gypsum Glasroc F FireCase 15mm approved, toughened to B.S.
board steel encasement system to
provide upto 180 minute fire protection. External Doors 1.4 W/m² K Doors with more than 50% of face area glazed.
> 50% glazed
140mm Hemelite Standard: 1.0 W/m² K All other doors.
New timber / metal staircase. 7.3N/mm², Density = 1,450kg/m³ ALL ABOVE MATERIALS COMPLY WITH CURRENT U-VALUES, SHOULD THE
15 no risers in total aggregate blockwork CONTRACTOR USE ALTERNATIVE MATERIALS THEN THE U-VALUES SHOULD BE
Rise: 220mm, Going: 250mm Thermal Conductivity = 0.47W/mK. CHECKED, VERIFIED AND A NEW (SBEM/TER) CALCULATIONS OBTAINED.
Exit Signs - Escape routes should be distinctively
and conspicuously marked by emergency exist
Staircase to be designed by
specialist manufacturer
DETAIL No: 10-01 (1:10)
signs of adequate size complying with Heath and
Safety (Safety sign and signals) Regulations 1996.
1 2 1 2
9352 External corner flashing
10/01 10/02 with 100mm overlaps,
4350 4350 8700
46
31
3x
6x
6x
100
20
14
14
3x
4x
4x
20
25
25
Internal cleader angle by steel
KC
KB
KB
B
140
A
U
U
100
100
473
Vapourflex sealant applied at joints.
140
CW14025 cold rolled sheeting rail
125
A A
140
910
1010
DF
1340
up 02 FE
01 rails, diagonal bracing, vertical struts 100mm core insulation thickness,
down
290 910 and fixing cleats all as specified by Overall Panel thickness = 100mm,
Colour: White. RAL 9003, BS 00E55
330
the manufacturer.
FD30S level
C UKB 305 x 165 x 54 threshold D 115mm thick timber frame partition
DG wall consisting of 47x100mm s/w
(above) access
3930 226 6340
UKB 356 x 171 x 45 (above)
03
5700
UKC 305 x 305 x 137 (above) above
provide upto 180 minute fire protection. coat plaster finish on habitable side
3000
WF-01
DETAIL No: 10-02 (1:10) of timber frame.
UKB 356 x 171 x 51 (above)
4512
31
A
6x
6x
14
14
1100
4x
4x
SD SD B
25
25
KB
KB
11990
30
B B
9
0x
20
Revision
Drawn
Date
Checked
Approved
Description
1100
1100
FC
3040
UKB 356 x 171 x 45
KP
above
A B
Revisions
UKB 152 x 152 x 23 UKB 152 x 152 x 23 above
(above) 0 100
DG This drawing may have been reduced original scale : 100mm
Sectional up and over Door
UKB 356 x 171 x 45 (above)
01
UKC 152 x 152 x 23 above
above in part or whole without prior written consent and is not available for third party use.
CHS 139.7 x 6.3
Standard
5700
3500
5700
3500
A-A UKC 305 x 305 x 137 (above) A-A A-A above A-A
Pallet Project
12 12 12 Gate 12 MR K. KHUSHI
TERRY'S STONE COTTAGE LIMITED.
LONDON ROAD, WHEATLEY, OXON, OX33 1JH
0
x3
TENDER ISSUE
20
FC
KP
3
31
31
2 (above)
2x Scale Drawn Checked Approved
6x
6x
14
4x
15 above
25
25
(above)
KC CAD Ref -
KB
KB
A B
GROUND FLOOR PLAN (1:50) Emergency Lighting - All escape routes should FIRST FLOOR PLAN (1:50) TEL: 07905 292415 EMAIL: [email protected]
www.guidinglightarchitecture.co.uk C Copyright
have adequate emergency lighting which will
1m 2 3 4 5 illuminate the route if the main supply fails. 1m 2 3 4 5 Project number Drawing number Revision
Emergency lighting should be designed and
Scale 1:50 installed in accordance with BS5266 Part 1. Scale 1:50 2404-157 2404-157-10 A