To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.

7200

Rescue Hero

OPERATING MANUAL
Rev. 5-12-11
(Software Version: W605-U2A4)

Coastal Amusements, Inc.

1935 Swarthmore Ave.
Lakewood, NJ 08701
(732) 905-6662
http://www.coastalamusements.com
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

DIP SW Setting
 DIP SW1 1 2 3 4 5 6 7 8
2 coins 3
ON ON
credits
2 coins 1
COIN1 ON OFF
credit
COIN VS. CREDIT
1 coin 2
OFF ON
credits
1 coin 1 credit OFF OFF
2 coins 3
ON ON
credits
2 coins 1
COIN2 ON OFF
credit
COIN VS. CREDIT
1 coin 2
OFF ON
credits
1 coin 1 credit OFF OFF
Coin meters mode 2 See Explanation Below ON
Counting mode mode 1 See Explanation Below OFF
Reserved OFF
Default Setting ON OFF ON OFF OFF OFF OFF OFF

1. Coin Meters Counting mode：

 ON Mode 2：
Coin meter 1 = COIN1 PULSE + COIN2 PULSE
Suitable for two coin mechs (same value).
 OFF Mode 1：
Coin meter 1 = COIN1 PULSE
Coin meter 2 = COIN2 PULSE
Suitable for two coin mechs (different values).
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

 DIP SW2 1 2 3 4 5 6 7 8
Keep CREDIT on YES ON
power fail NO OFF
DEMO MUSIC No ON
(Attract Mode Only) YES OFF
YES ON
TICKET DISPENSER
NO OFF
Keep unpaid tickets No ON
on power fail YES OFF
60 SEC. ON ON
50 SEC. ON OFF
GAME TIME
40 SEC. OFF ON
30 SEC. OFF OFF
ADJUST Continuously adjust ticket values
Ticket value for ON
VALUES from 1 - 99
each level
DEFAULT See Ticket Value Table OFF
FREE PLAY ON
GAME mode
CREDIT OFF
Default Setting ON OFF ON OFF OFF OFF OFF OFF
1. Ticket out mode：
 Fixed：Cannot change (Factory Default Ticket Value Table)

LEVEL 1 2 3 4 5 6 7 8 9 10 11 12
Number of
1 2 3 4 5 6 7 8 10 20 30 40
Tickets

 ADJUST VALUE： To change ticket value at each level from 1 - 99. See DIP SW4
Ticket setting.

 DIP SW3 1 2 3 4 5 6 7 8
COIN1 3 ON ON
TICKET(S)/UPON COINS 2 ON OFF
INSERTED 1 OFF ON
(MERCY TICKET) 0 OFF OFF
COIN2 3 ON ON
TICKET(S)/UPON 2 ON OFF
COINS INSERTED 1 OFF ON
(MERCY TICKET) 0 OFF OFF
4 ON ON
NUMBER OF TRIES IN 3 ON OFF
EACH GAME 2 OFF ON
1 OFF OFF
Default Setting OFF OFF OFF OFF OFF OFF OFF ON
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

 DIP SW4 1 2 3 4 5 6 7 8
Speed Mode of Random ON
Raising Bar Fixed OFF
Fastest ON ON
Speed of Raising Bar
Fast ON OFF
Adjustable only when
Normal OFF ON
SW4 Pin 1, is OFF
Slow OFF OFF
Difficult ON ON
Hard ON OFF
Game Difficulty
Normal OFF ON
Easy OFF OFF
Normal game ON ON ON
Normal game ON ON OFF
Normal game ON OFF ON
Normal game ON OFF OFF
System mode Ticket Setting OFF ON ON
I/O TEST OFF ON OFF
Default
OFF OFF ON
setting
Normal game OFF OFF OFF
Default Setting OFF OFF ON OFF ON OFF OFF OFF
 Notes：
1. Speed Mode of Raising Bar：
 FIXED： The speed of Rising bar is fixed in each game. The speed of Rising bar is
referred to Setting of DW 4 Pin 2~3.
 RANDOM： The speed of Rising bar is random in each game and the random speed
will be one of four speeds (DW 4 Pin 2~3)
2. Game Difficulty：
 Easy：Both fire bars turn around in fixed way. When rising bar is rising up on the
3/4 position, both fire bars will be turning faster.
 Normal：Both fire bars turn around in fixed way. When rising bar is rising up on
the 2/3 position, both fire bars will be turning faster.
 Hard：Both fire bars turn around in fixed way. When rising bar is rising up on the
1/2 position, both fire bars will be turning faster.
 Difficult：Both fire bars will turn a different way randomly, and the speed of
rising bar is random as well.
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

TICKET VALUE TABLE

3.

 Ticket Setting：
 Enter mode： Only adjustable when DIP SW2 Pin 7 is On.
 Setting Detail：
Adjust
LEVEL Default
Range
1 1 1 ~ 99
2 2 1 ~ 99
3 3 1 ~ 99
4 4 1 ~ 99
5 5 1 ~ 99
6 6 1 ~ 99
7 7 1 ~ 99
8 8 1 ~ 99
9 10 1 ~ 99
10 20 1 ~ 99
11 30 1 ~ 99
12 40 1 ~ 99
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Maintenance

I/O Test
 Entering : adjust DIP SW4 pins 6、7、8 to “OFF、ON、OFF” and then restart.
 Exit：adjust DIP SW4 pins 6、7、8 to “OFF、OFF、OFF” then turn on and off
machine back to normal game mode.
 Buttons description：
【TEST】SW：Choose the test item
【SERVICE】SW：Enter in test mode

 Operation diagram: If you would like to choose another test item, press【TEST】SW
to exit current test
Item Content
1 Test DIP SW1、2
2 Test DIP SW3、4
3 Test switches
4 Test LED light, DISPLAY
5 Test UP/DOWN motor and position SENSOR
6 Test Left side motor
7 Test Right side motor
8 Test sound
9 Rising bar auto test
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

 Test DIP SW1、2

Turn on each PIN and then the corresponding
display section will light up. (DIP switch pin 1
causes display to flash).
(DIP SW2 shown on ten digits ; DIP SW1 shown
on unit digits)

 Test DIP SW3、4

Turn on each PIN and then the corresponding
display section will light up. (DIP switch pin 1
causes display to flash).
(DIP SW4 shown on ten digits ; DIP SW3 shown
on unit digits)

 Test Switch
Following signals have their compared display
section to become light up and flash to show
the status
1. Joystick – UP 7. COIN1 signal
2. Joystick – Down 8. COIN2 signal
3. Rising bar’s 9. n/a
beginning SW 10. Ticket dispenser
4. Rising bar’s SENSOR
ending SW 11. Ball dispenser
5. n/a SENSOR (reserved)
6. Rising ball SW

 Test LED Lights、DISPLAY

 Entering：Under TEST mode, press TEST SW to “4”, and press【SERVICE】 SW to
enter test mode of Test LED lights、DISPLAY. The test menu will show forward to
the next test item in every 1 second.
 Button/SW operating description of Test LED lights、DISPLAY：
1.) Press【TEST】SW：Back to TEST Menu.
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

 Test up/down motor and position sensor

 Entering：Under TEST mode, press TEST SW to “5”, and press【SERVICE】 SW to
enter test mode of up/down motor and position sensor.
 Button/SW operating description of Test up/down motor：
1.) Press【SERVICE】button:：Select speed 0~15, 0 means Motor is off. Number
value is higher, speed of motor is faster. Motor can start working in number
value 10 after installing in the game. Move joystick up and down to raise and
lower bar. If motor is not working at speed 10, the motor is out of order and
need to replace. If motor is still working in number value 0, the Driver IC in
main board is bad, the main board needs to be repaired. During the process of
moving, the display shows the bar position, if this number is not correct, it
means the installation of position sensor is not correct or the sensor has failed.
2.) Press【TEST】SW：Back to TEST Menu.

 Test left side motor

 Entering：Under TEST mode, press TEST SW to “6” , and press【SERVICE】 SW to
enter test mode of left side motor.
 Button/SW operating description of Test left side motor：
1.) Press【SERVICE】button:：Select speed 0~15, 0 means Motor is off. Number
value is higher, speed of motor is faster. Motor can start working in number
value 8 after installing in the game. Use joystick to move the flame arm in
either direction. If motor is not working at speed 8, the motor is bad and needs
to be replaced. If motor is still working in number value 0, the Driver IC on the
main board is bad, and the main board needs to be repaired.
2.) Press【TEST】SW：Back to TEST Menu.

 Test right side motor

 Entering：Under TEST mode, press TEST SW to “7” , and press【SERVICE】 SW to
enter test mode of right side motor
 Button/SW operating description of Test right side motor：
1.) Press【SERVICE】button:：Select speed 0~15, 0 means Motor is off. Number
value is higher, speed of motor is faster. Motor can start working in number
value 8 after installing in the game. Use joystick to move the flame arm in
either direction. If motor is not working at speed 8, the motor is bad and needs
to be replaced. If motor is still working in number value 0, the Driver IC on the
main board is bad, and the main board needs to be repaired.
2.) Press【TEST】SW：Back to TEST Menu.

 Test Sound
 Entering：Under TEST mode, press TEST SW to “8” , and press【SERVICE】 SW to
enter test mode of Sound.
 Button/SW operating description of Test Sound：
1.) Press【SERVICE】SW：Select sounds.
2.) Move joystick【UP】: Start Playing.
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

3.) Press【TEST】SW：Back to TEST Menu.

 Rising bar auto test

 Entering：Under TEST mode, press TEST SW to “9” , and press【SERVICE】 SW to
enter auto test mode of Rising bar.
 Button/SW operating description of Rising bar auto test：
1.) Move joystick【UP】: Start or Stop Test.
2.) Press【TEST】SW：Back to TEST Menu.
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Error code description

Machine will auto check each function, if any function is out or order, the error code
will be showed on Credit Display. Error cores table is showed as below：
Error
Description Failure Reason Trouble shooting
Code
Had changed
different version
cr Memory ROM (program) or Reboot machine again.
compulsion
elimination

Start point SW is 1. Check whether the wire of Start point

01 Start point SW SW or Destination SW is connected well.
fault.
2. Check whether the wire of J22 of Main
board is connected well.
Destination SW is 3. SW or main board is out of order or
02 Destination SW
fault. main board.
1. Check whether the wires of all Position
SENSOR are connected well.
2. Check whether the wire of J22 of Main
Position Position SENSOR of board is connected well.
03
SENSOR Rising bar is fault. 3. W100203- Position SENSOR is out of
order.
4. Main board is out of order or main
board
1. Check whether there is any ball in the
machine.
2. Check whether the wire of Rising bar
Ball position SW is
SW is connected well.
04 Rising bar SW fault or there is no
3. Check whether the wire of 15 of Main
ball.
board is connected well
4. SW or main board is out of order or
main board.
Memory of PCB is
05 Memory Sent the PCB back to repair.
out of order

06 Coin mech 1 1. Check if the meter is out of work? Is the

pin loose?
07 Coin mech 2 Meters Offline 2. Check if the pin #J18 connects well?
PS. If all ticket settings are set as 0, the
program will not detect ticket meter.
09 Ticket

1. Check Ticket Qty.

10 Tickets No tickets 2. Check the wire of ticket dispenser is
connected well.
11 COIN1
Wrong input signal
12 COIN2 Check Coin mech is N.O. mode.
of Coin Mech.
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Wiring Diagram

MAIN BOARD W100621

 JUMP PIN
TICKET
COIN1 COIN2 COIN3
J5 J6 J7 J8 DISPENSER
DISABLE DISABLE DISABLE
Driver
1 1 1 1
HIGH Drive HIGH Drive HIGH Drive HIGH Drive
2 2 2 2
LOW Drive LOW Drive LOW Drive LOW Drive
3 3 3 3
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

J3 COLOR 2.5 Pin Remark J4 COLOR 2.5 Pin Remark

SOUND VR --
1 WHITE 1 BLUE SPEAKER -
PIN1
SOUND VR -- Volume VR
2 RED 2 BLUE SPEAKER
PIN2 (1K) SPEAKER
SOUND VR --
3 BLACK 3 PURPLE SPEAKER +
GND
4 PURPLE SPEAKER +
J9 COLOR 2.5 Pin Remark
1 RED LEFT LED-R J14 COLOR 2.5 Pin Remark
2 GREEN LEFT LED-G 1 GND
LEFT LED UP/DOWN
3 BLUE LEFT LED-B 2 RED&WHITE
MOTOR +
UP/DOWN
4 BLACK GND 3 BROWN
MOTOR -
LEFT MOTOR
5 RED&WHITE RIGHT LED-R 4 RED&YELLOW
+
6 GREEN&WHITE RIGHT LED-G 5 ORANGE LEFT MOTOR -
RIGHT LED
RIGHT MOTOR
7 BLUE&WHITE RIGHT LED-B 6 RED
+
RIGHT MOTOR
8 BLACK GND 7 YELLOW
-
8 GND
J13 COLOR 2.5 Pin Remark
1 Brown A J15 COLOR 2.5 Pin Remark
2 RED B 1 RED +12V Connect top
3 ORANGE C 2 BROWN LED-R win LED light
4 YELLOW D 3 ORANGE LED-G board -
Connect
5 GREEN E 4 YELLOW LED-B W100831
W991907
Rising bar
6 BLUE F CREDIT Dispaly 5 GREEN
SW N.O. Rising bar
(connect one
Rising bar SW
7 PURPLE G by one) 6 BLACK
SW COM
8 GRAY DP
9 WHITE COM0
10 PINK COM1
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

J11 14 PIN -- CONNECT W100622 DISPLAY

P# Color Pin P# Color Pin
1 2
3 4
5 6
7 8
9 10
11 12
13 14
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

J16 COLOR 2.5 PIN REMARK J17 COLOR 2.5PIN-RED REMARK

1 RED +12V 1 RED +12V
COIN1 COIN1
2 WHITE 2 BROWN&WHITE
SIGNAL METER
COIN1
COIN 1 COIN2
3 GREEN DISABLE 3 ORANGE&WHITE
METER METER
SIGNAL
PRIZE
4 BLACK GND 4
METER
TICKET
5 RED +12V 5 GREEN&WHITE
METER
COIN 2
COIN2
6 WHITE&BLUE
SIGNAL
COIN2
2.5PIN-
7 GREEN&WHITE DISABLE J19 COLOR REMARK
BLUE
SIGNAL
8 BLACK GND 1 BROWN&WHITE A
9 +12V 2 RED&WHITE B
COIN3
10 3 BROWN&WHITE C
SIGNAL
NOTE
COIN3 CONNECT
READER YELLOW &
11 DISABLE 4 D W991907
WHITE
SIGNAL T/D
12 GND 5 GREEN&WHITE E DISPLAY
13 RED +12V 6 BLUE&WHITE F (1 TO 1)
14 PINK/GREEN T/D SENSOR TICKET 7 PURPLE&WHITE G
15 BLUE T/D SSR DISPENSER 8 GRAY&BLACK DP
16 BLACK GND 9 WHITE&PURPLE COM5
10 PINK/BLUE COM6

J18 34PIN- CONNECT W100624-SCORE LED LIGHT

P# COLOR PIN P# COLOR PIN
1 2
3 4
5 6
7 8
9 10
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

11 12
13 14
15 16
17 18
19 20
21 22 RED +12V
PURPLE & Left side LED Light
23 24
WHITE (W060711)
25 RED +12V 26 RED +12V
Right side LED Light
27 GRAY 28 GRAY & BLACK Top Win Light
(W060711)
29 30
31 32
33 34

J20 COLOR 2.5 PIN REMARK J21 COLOR 2.5 PIN REMARK
1 +12V 1 BLACK GND
ORANGE JOYSTICK-UP
2 2
& WHITE SW
CAPSULE
CAPSULE DISPENSOR JOYSTICK
3 DISPENSOR 3 BLACK GND
MOTOR
(RESERVED)
CAPSULE DISPENSOR GREEN & JOYSTICK-
4 4
SENSOR WHITE DOWN SW
5 GND 5
6
J22 COLOR 2.5PIN REMARK 7 BLACK GND
A POSITION PURPLE TEST SW TEST
1 RED +12V 8
Sensor & WHITE (N.O.)
2 BROWN A POSITION Sensor CONNECT 9 GND
WITH SERVICE SW SERVICE
3 BLACK GND 10 PINK/BLUE
W100203 (N.O.)
4 RED +12V B POSITIOB 11
5 BROWN B POSITION Sensor Sensor 12
CONNECT
6 BLACK GND WITH 13
W100203
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

START POINT SW
7 BLUE START POINT 14
(N.O.)
SW
8 BLACK GND 15
DESTINATION SW
9 WHITE DESTINATION 16
(N.O.)
SW
10 BLACK GND 17

2.5 Pin-
J23 COLOR 3.96 Pin REMARK J24 COLOR REMARK
BLUE
1 BLACK GND 1 PURPLE DI CONNECT WITH
2 YELLOW +12V 2 GRAY CK J1 OF ODD
3 YELLOW +12V 3 WHITE /EO NUMBER
4 BLACK GND 4 PINK LE1 DISPLAY (PCB-
5 YELLOW +12V 5 BLACK GND W101134)
6 YELLOW +12V
2.5 Pin-
7 BLACK GND Power PIN J25 COLOR REMARK
GREEN
PURPLE DI
8 +5V 1
& WHITE
CONNECT WITH
GRAY & CK
9 +5V 2 J1 OF EVEN
BLACK
NUMBER
WHITE /EO
10 BLACK GND 3 DISPLAY (PCB-
&BLUE
W101134)
4 PINK/BLUE LE1
5 BLACK GND
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

COUNT DOWN DISPLAY BOARD W100622 (backside)

J11
2
1

J11 14PIN – Connect Main Board-W100621

P# Color Pin # P# Color Pin #
1 COM2 W100621-J11 Pin 1 2 TBA W100621-J11 Pin 2
3 COM3 W100621-J11 Pin 3 4 TBB W100621-J11 Pin 4
5 COM4 W100621-J11 Pin 5 6 TBC W100621-J11 Pin 6
7 8 TBD W100621-J11 Pin 8
9 10 TBE W100621-J11 Pin 10
11 12 TBF W100621-J11 Pin 12
13 TBP W100621-J11 Pin 13 14 TBG W100621-J11 Pin 14

TOP LED BOARD W100831 for ball touch (back side)

CN1 COLOR 2.5 Pin
Connect main
1 +12V
board J15 Pin 1
Connect main
2 LED-R
board J15 Pin 2
1
Connect main
3 LED-G
board J15 Pin 3
Connect main
4 LED-B
board J15 Pin 4
 To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Score LED BOARD W100624 (backside)


J1 COLOR 2.5 Pin
1 +12V
Connect main
2 LED SIGNAL board J18

1
J2 J1 2.5 Pin
J2 COLOR
1 1 +12V Connect main
2 LED SIGNAL board J18

SENSOR BOARD W100203

J1 COLOR 2.5 Pin
J1 1 +12V
1 Connect main
2 VO
board J22
3 GND

CREDIT display board W991907 (front side)

JP1 COLOR 2.54 Pin
Connect main
1 Brown A
board J13 Pin 1
Connect main
2 RED B
board J13 Pin 2
Connect main
3 ORANGE C
board J13 Pin 3
Connect main
4 YELLOW D
JP1 board J13 Pin 4
1
Connect main
5 GREEN E
board J13 Pin 5
Connect main
6 BLUE F
board J13 Pin 6
Connect main
7 PURPLE G
board J13 Pin 7
8 GRAY DP Connect main
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

board J13 Pin 8

Connect main
9 WHITE COM4
board J13 Pin 9
Connect main
10 PINK COM3
board J13 Pin 10
11 COM2
12 COM1