AIR DIFFUSERS
Fine Bubble & Coarse Bubble
Fine Bubble Diffusers
Fine bubble diffusers produce a plethora of very small air
bubbles which rise slowly from the floor of a wastewater
treatment plant or sewage treatment plant aeration tank and
provide substantial and efficient mass transfer of oxygen to
the water. The oxygen, combined with the food source,
sewage, allows the bacteria to produce enzymes which help
break down the waste so that it can settle in the secondary
clarifiers or be filtered by membranes.
SPECIFICATIONS MEMBRANE OD LENGTH
AIR FLOW
RATE
END
CONNECTIONS
• High grade EPDM/SILICON membrane 63 mm 620 mm 4.0 – 5.0. m /hr 3/4" BSP
• Clamps with stainless steels. 63 mm 1020 mm 5.0 - 7.0 m /hr 3/4 " BSP
• Supporting frame with PVC/PP nipples.
92 mm 1020 mm 10.0 - 12.0 m /hr 1"& 1 ¼ “ BSP
• Air inlet with molded injection ABS adapter.
Coarse Bubble Diffuser
Coarse bubble diffusers produce bubbles which rise rapidly
from the floor of a wastewater treatment plant or sewage
treatment plant tank. They are typically used in grit
chambers, equalization basins, chlorine contact tanks, and
aerobic digesters, and sometimes also in aeration tanks.
Our Coarse Bubble diffusers are available at the most
reasonable prices.
APPLICATION MODEL CBD/80 CBD/150
SHAPE DISC DISC
• Municipal waste water
treatment SIZE 80 mm 150 mm
• Industrial waste water BUBBLE SIZE 4 mm TO 5 mm 4 mm TO 5 mm
treatment MEMBRANE EPDM/SILICON EPDM/SILICON
• Sludge Stabilization NO. OF AIR DISCHARGE PORTS 10 8
• Activated Slurry systems AIR FLOW RANGE PER DIFFUSER 3 - 4 m³ /hr 5 - 8 m³/hr
• Contact aeration system
END CONNECTION ½” & 3/4" BSP 1" BSP
Fine bubble Disc Diffuser
Fine bubble Disc diffusers produce a plethora of very small air
Bubbles which rise slowly from the floor of a w a s t e w a t e r
Treatment plant or sewage treatment plant aeration tank and
provide substantial and efficient mass transfer of oxygen to
The w a t e r . The oxygen, combined with the food source,
Sewage, allows the bacteria to produce enzymes which help
Break down the waste so that it cans Settle in the secondary
clarifiers or be filtered by membranes.
SPECIFICATIONS
• High grade EPDM/SILICON membrane
• Supporting frame with PVC/PP nipples.
• Air inlet with molded injection ABS adapter.
AIR FLOW END
MEMBRANE OD
RATE CONNECTIONS
9” .0 – 5.0. m /hr 1" BSP
12” 5.0 - 7.0 m /hr 1" BSP
