BOQ for : Special Repair of Electricity Distribution Division and Sub Division Office & Other Misc.

Civil works at Electricity Division Campus Ranikhet, Almora.

S. DSR Discription of work Qty. Unit Rate Amount
No No DSR
(2018) 2018 +
CI
1 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator ) 18%
manual means in foundation tranches (not exceeding 1.5m in width or 10
sqm on plan) including dressing of sides and ramming of bottoms, lift up to
1.5m, (All kinds of soil).
14.122 Cum 316.56 4,470.46
2 2.27 Supplying and filling in plinth with Jamuna sand under floors including.
Watering, ramming consolidating and dressing complete.
1.000 Cum 2450.48 2,450.48
3 4.1.3 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering -1:2:4 (1 cement : 2 coarse
sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size) 17.825 Cum 8517.62 1,51,826.58
3 4.1.8 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering -All work up to plinth
level:1:4 :8 (1 Cement :4 coarse sand: 8 graded stone aggregate 40 mm
nominal size) 20.204 Cum 7264.17 1,46,765.29
4 5.1.2 Providing and laying in position specified grade of reinforced cement
concrete excluding the cost of centering, shuttering,up to plinth level:
1:1:5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 cm nominal
size). 0.480 Cum 9684.05 4,648.34
5 5.2.2 Reinforced cement concrete work in walls (any thickness), including
attached pilasters, buttresses, posts reinforcement. 1:1:5:3 (1 cement : 2
coarse sand 4 graded stone aggregate 20 cm nominal size).
1.000 Cum 11676.18 11,676.18
6 5.3 Reinforced cement concrete working beams, suspended floors, roofs having
slope up to 1.5 landings, balconies, shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral/ of centering, shuttering, finishing and
reinforcement with 1:1.5:3 0.212 Cum 12250.58 2,597.12
7 5.9.3 Centering and shuttering including strutting propping etc. and removal of
form for: Suspended floors, roofs, landings, balconies and access platform.
3.35 Sqm 869.57 2,913.06
8 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete. (T M T bars ).
56.52 Kg 104.77 5,921.60
9 6.1.1 Brick work with F.P.S. bricks of class designation 75 in foundation and

plinth in: Cement mortar 1:4( 1 cement : 4 coarse sand) 5.603 Cum 8000.25 44,825.40
10 6.1.2 Brick work with F.P.S. bricks of class designation 75 in foundation and

plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) 5.750 Cum 7725.72 44,422.89
11 6.4.2 Brick work with F.P.S. Bricks of class designation 75 in superstructure
above plinth level up to floor V level in all shapes and sizes in : Cement
mortar 1:6 ( 1 cement : 6 coarse sand)
1.000 Cum 9523.70 9,523.70
12 6.13.2 Half brick masonry with F.P.S. bricks of class designation 75 in
superstructure above planth level up to floor V level. Cement morat 1:4 ( 1
cement : 4 coarse sand)
1.000 Sqm 1169.50 1,169.50

J.E S.D.O
 13 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in
all colours, shades except burgundy, bottle green, black of any size a
approved by Engineer-in-Charge, in skirting, risers of steps and dados, over
12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm,including pointing in white cement
mixed with pigment of matching shade

20.76 sqm 1292.71 26,836.66

14 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS :2202
(Part I) non-decorative type, core of block board construction with frame of
1st class hard wood and well matched commercial 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of shutters: 35
mm thick including ISI marked Stainless Steel butt hinges with necessary
screws
11.550 Sqm 2367.23 27,341.51
15 9.63.4
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,
(Barrel type) with necessary screws etc. complete : 100x10 mm 5 Each 48.56 242.80
16 9.66.1
Providing and fixing ISI marked oxidised M.S. handles conforming to
IS:4992 with necessary screws etc. complete : 125 mm 5 Each 43.73 218.65
17 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised
anodic coating not less than grade AC 10 as per IS : 1868), transparent or
dyed to required colour or shade, with nuts and screws etc. complete :
250x16 mm
2 Each 322.65 645.30
18 9.97.3 Providing and fixing aluminium tower door bolts ISI marked anodised
(Anodic coating not less than grade AC 10 as per IS:1868) etc. complete:
(200x10mm) 20 Nos 112.93 2,258.60
19 9.97.4 Providing and fixing aluminium tower door bolts ISI marked anodised
(Anodic coating not less than grade AC 10 as per IS:1868)transparent or
dyed to required colour or shade with nuts and screws etc. complete:
(150x10mm) 10 Nos 94.11 941.10
20 9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour or shade with necessary scerews etc. complet: 125mm
10 Nos 74.85 748.50
21 9.101.1 Providing and fixing aluminium handles floor door stopper ISI marked
anodised (anodic coating not less than grade AC 10 as per IS: 1868)
transparent or dyed to required colour or shade with necessary scerews etc.
complet: Single rubber stopper
10 Nos 42.60 426.00
22 10.16.2 Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer, including welding andbolted with
special shaped washers etc. complete.Hot finished welded type tubes kg

1370.55 kg 197.61 2,70,834.39

23 10.25.2 steel work welded in built up sections/ framed work including cutting,
hoisting fixing in position and applying a priming coat of approved steel
primer susing structural steel etc. as required.
988.95 K.G 164.36 1,62,543.82
24 10.29.1 Providing & fixing fly proof wire gauze to windows, clerestory windows &
doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S.
Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

21.42 Sqm 889.96 19,062.94

25 10.30.2 Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows, all complete with : 5.5 mm thick glass panes
sqm 4.86 Sqm 1499.17 7,285.97

J.E S.D.O
 26 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2coarse sand : 4 gradd stone
aggregate) finished with a floating coat of neat cement including cement
slurry, (40 mm thick with 20mm nomnal sxe stone aggregate).
1.80 Sqm 625.28 1,125.50
27 11.13.1 Providing and fixing glass strips in goints of terrazo/cement concrete floors.
(40mm wide and 4mm thick)
20.00 Metre 94.29 1,885.80
28 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming to
IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume
Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse
sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the
joints with white cement and matching pigment etc., complete.

6.75 sqm 1162.97 7,850.05

29 11.47.2 Providing and laying Vitrified tiles in different sizes (thickness to
bespecified by the manufacturer), with water absorption less than 0.08%and
conforming to IS: 15622, of approved brand & manufacturer, in all colours
and shade, in skirting, riser of steps, laid with cement based high polymer
modified quick set tile adhesive (water based) conformingto IS: 15477, in
average 6 mm thickness, including grouting of joints(Payment for grouting of
joints to be made separately).

161.76 Sqm 2175.64 3,51,931.53

30 12.41.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS: 13592 (i) Single socketed pipes (75mm diameter)
5.00 Mt 252.32 1,261.60
31 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS: 13592 Type A including jointin with seal ring conforming
to IS: 5382 leaving 10mm gap for thermal expansion. (i) Single socketed
pipes (110mm diameter)
32.00 Mt 382.74 12,247.68
32 12.50 Providing and fixing precoated galvanised iron profile sheets (size,
shape and pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120
grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches during transportation and should be
supplied in single length upto 12 metre or as desired by Engineerin-
charge. The sheet shall be fixed using self drilling /self tapping screws
of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever
required.

121.89 Sqm 787.38 95,973.75

33 12.51.1 Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm
as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side of the sheet and polyester top coat 15-18 microns using self drilling/ self
tapping screws complete :
14.34 Metre 522.33 7,490.21

J.E S.D.O
 34 13.4.1 12mm cement plaster of mix: 1:4 (1cement : 4coarse sand)
63.57 Sqm 346.48 22,025.73
35 13.4.2 12mm cement plaster of mix: 1:6 (1cement :6coarse sand) 172.14 Sqm 330.67
56,921.53
36 13.26 Providing and applying white cement based putty of average thickness 1mm,
of approved brand and manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete.
607.63 Sqm 246.80 1,49,963.08
37 13.41.1 Distempering with oil bound washable distemper or approved brand and
manufacture to give an enen shade . New work (two or more coats ) over and
including priming coat with cement primer.
524.70 Sqm 192.53 1,01,020.49
38 13.45.1 Finishing wall with textured exterior paint of required shade: New work
(two or moar coats applied @ 3.28 ltr/10sqm over and including base coat of
water proofing cement paing applied @2.20kg/10sqm.
82.93 Sqm 291.09 24,140.09
39 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of
required colour to give an even shade: Two or more coats on new work over
an under coat of suitable shade with ordinary paint of approved prand and
manufacture.
42.90 Sqm 222.26 9,534.95
40 14.1.2 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5
sqmeters and under, including cutting the patch in proper shape, raking out
joints and preparing and plastering the surface of the walls
complete,including disposal of rubbish to the dumping ground within 50
metres lead :With cement mortar 1:4 (1 cement : 4 coarse sand

41.58 Sqm 539.01 22,412.04

41 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with
100mm sand cast lron P or S trap. 10 litre low level white P.V.C. flushning
cistem with manually controlled device (handle lever ) conforming to IS:
7231, with all fitting and fixtures complete including cutting adn making
good the walls and floors wherever required: White Vitreous china Orissa
patern W.C. pan of size 580x440mm with integral type foot rests.

3.00 Each 6802.32 20,406.96

42 17.7.4 Providing and fixing wash basin with C.I. brackets 15mm C.P. brass pillar
taps, 32mm C.P. brass waste of standard pattern, including painting of
fittings and brackets cutting and making good the walls wherever require:
White Vitreous china Flat back wash basin size 550x400mm with a pair of
15mm C.P. brass pillar tap. In Toilet
3.00 Each 3149.84 9,449.52
43 17.31 Providing and fixing 600x450mm beveled edge mirror of superior glass (of
approved quality ) complete with 6mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete. In Toilet

3.00 Each 1609.84 4,829.52

44 17.56.2.1 Providing and fixing terminal guard: :75mm (Sand cast iron S&S as per IS-
1729) 1.00 Each 356.83 356.83
45 17.60.1.1 Providing and fixing trap of self cleansing design with screwed down or
hinged grating with or without vent arm complete including cost of cutting
and making good the walls and floors. 100 mm inlet and 100mm outlet
(Sand cast iron S&S as per IS: 3989). 1.00 Each 1897.78 1,897.78
46 18.11.1 Concealed pipe including painting with anti corrosive bitumasiic paint
cutting chases and making good the wall . 15mm dia nominal bore
12.00 Mt 561.60 6,739.20
47 18.12.1 Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External work 15mm dia nominal bore
10.00 Mt 306.33 3,063.30
48 18.12.2 Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc. External work 20mm dia nominal bore
2.00 Mt 356.08 712.16

J.E S.D.O
 49 18.32.1 Constructing masonry Chamber 30x30x50 cm inside with 75 class
designation brick work in cement mortar 1:4 (1cement : 4coarse sand) for
stop cock with C.I. surface bozx 100x100x75mm (insside) with hinged cover
fixed in cement concrete slab 1:2:4 mix ( 1cement : 2coarse sand: 4 graded
stone aggregate 20mm nomnal size) necessary excavation foundation
concrete 1:5:10( 1cement:5fine sand :10 graded stone aggregate 40mm
nominal size) and inside plastering with cemnt mortar 1:3 (1cement:3coarse
sand ) 12mm thick finsished with a floating coat of neat cement complete as
per standard design . With F.P.S. bricks

2.00 Each 1985.49 3,970.98

50 18.48 Providing and placing on terrace (at all floor levels) polyethylene water
stonrage tank ISI: 12701 marked with cover and suitable locking
arrangement and making necessary holes for nilet, outlet and overflow pipes
but without fittings and the base support for tank.
1000.00 Lt. 11.04 11,040.00
51 18.49.1 Providing anf fixing C.P. brass bib cock of approved quality conforming to
IS: 8931 (15mm nominal bore). 1.00 Each 525.65 525.65
52 18.52.1 Providing and fixing C.P. brass stop cock (concealed ) of standard design &
of approved make conforming to IS:8931. (15mm nomi bore)
1.00 Each 760.66 760.66
53 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points
of approved quality conforming to IS: 8931 a(15mm nominal bore)
2.00 Each 667.50 1,335.00
54 18.65 P/F soap dish chromium plated with brackets fixed to wooden cleates with
brass screws including supply of all material, labour & T&P etc, required for
proper completion of work. In Toilet
1.00 Each 163.74 163.74
55 21.1.1.2 P/fixing aluminium work for doors, windows ventilators and partitions with
extruded built up standard tubular sections/ approprate Z sections and other
sections of approprate make conforming to IS: 733 and IS: 1285 fixed with
rawl plugs and screws of with fixing clips or with expanision hold fasteners
incl. necessary filling up of gaps at junctions at top bottom and sides with
required PVC/ neoperene felt etc. For fixed portion.

100.00 KG 572.51 57,251.00

56 21.1.2.2 P/fixing aluminium work for doors, windows ventilators and partitions with
extruded built up standard tubular sections/ approprate Z sections and other
sections of approprate make conforming to IS: 733 and IS: 1285 fixed with
rawl plugs and screws of with fixing clips or with expanision hold fasteners
incl. necessary filling up of gaps at junctions at top bottom and sides with
required PVC/ neoperene felt etc. : For shutters of doors windows &
ventilators incl. p/fixing hinges / pivots and making provision for fixing of
fittings wherever required

50.00 KG 685.50 34,275.00

57 21.2.1 P/fixing 12 mm thick prelaminated particle board flat pressed three layer or
graded wood particle board conforming to IS: 12823 Gradel Type ll, in
panelling fixed in aluminum doors, windows shutters and partition frames
with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of engineer-in-charge. Pre-laminated particle board
with decorative lamination on one side and balancing lamination on other
side

20.00 Sqm 1251.80 25,036.00

J.E S.D.O
 58 26.25 Providing and fixing 15 mm thick false ceiling tiles at all heights with
integral densified calcium silicate reinforced with fibre and natural filler
false ceiling tiles of Size 595x595 mm of approved texture, design and
patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per
IS 8225:1987, Light reflectance of 85% (minimum).Non combustible as per
BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity
resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM
518:1991,in true horizontal level on theexisting frame work consisting of T-
sections and Lsections suitablyfixed according to tile size as per direction of
Engineer-in-charge.

95.920 Sqm 1730.35 1,65,975.17

59 1.8.2 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5
sqmm FR PVC insulated copper conductor single core cable 1.5 sqmm FR
PVC insulated copper conductor single core cable etc as requited.
GROUP B
10.00 Point 952.31 9,523.10
60 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FR PVC insulated copper conductor, single core cable in surface/
recessed medium class PVC conduit as required Circuit / sub main wiring in
PVC codute 2*1.5 Sq.M*1*1.5 Sq.M
50.00 Mt 183.18 9,159.00
61 1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FR PVC insulated copper conductor, single core cable in surface/
sub main wiring in PVC codute 2*2.5 Sq.M*1*2.5Sq.M
50.00 Mt 209.53 10,476.50
62 1.30 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal
size) on surface or in recess with suitable size of phenolic providing and
fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type
switch, connection, painting etc. as required.
4.00 Each 509.41 2,037.64
63 2.3.2 S/F 8ways double door singke pole and netural,sheet steel,MCB D.B 240
volts on surface/recess complete with tinned copper bus bar netural bus bar,
earth bar,din bar detachable gland plate,interconnections, phosphatized and
power painted including earthing etc. as required.

1.00 Each 2208.26 2,208.26

64 2.10.1 S/F 5amp to 32amp rating 240 volts,B series,MCB suitable for lighting and
other loads of single pole in the existing MCB D.B complete with connection
,testing and commissioning etc. as required.
6.00 Each 249.69 1,498.14
65 2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the
existing MCB DB comp. with connections, testing & commissioning etc. as
required. 40AMP rating double pole 240 V isolater in existing MCB DB
complete
1.00 Each 425.34 425.34
66 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having
locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/
coke and salt as required.
1.00 Set 7799.17 7,799.17
67 NSI Providing and Fixing PVC Panelling with necessary pasting materials/screws
etc including all labour materials, T&P required for proper completion of
work as per direction of EI
128.28 Sqm 1936.38 2,48,398.83
68 NSI Supply of 20 watt LED Tubelights Phillips or equilent make as approved by
EI 8.00 Each 302.08 2,416.64
69 114 Engazing suitable beldar for petty works ( basic rates labour )
1 day 927.48 927.48
70 117 Engazing suitable fitter for petty works ( basic rates labour )grade II
1 day 1128.08 1,128.08
71 112 Engazing suitable Carpenter with kit for petty works ( basic rates labour
)grade II 1 day 1128.08 1,128.08
Total 2463295.60

J.E S.D.O