Product range E 210

On-off switches , pushbuttons ,

indicator lights
System pro M compact ®

Power and productivity

for a better world TM ABB
Half-size
Strong effect

The new 9 and 18 mm wide ABB modular command or

control devices for DIN 35 mm mounting rail attachment
in the system pro M compact ® design.

ABB modular command or control devices

can be used in the SMISSLINE socket system
(without contact to the bus bar).

0/2 System pro M compact® | Technical catalogue

Contents

Applications Page 0/4

Sample applications Page 1/1

Characteristics
Product range E 210 Page 2/1

Device overview Page 3/1

Ordering data Page 4/1

Technical data Page 5/1

Dimensions Page 6/1

Approval and standards Page 7/1

Technical catalogue | System pro M compact® 0/3

Applications
On-off switches, pushbuttons, indicator lights

Using modular DIN-rail mounted devices (MDRC) such as On-Off switches, pushbuttons and
indicator lights makes it possible to switch and control electric loads from a central location.
Thanks to signalling of the switch position, operating states can be recognized easily and users
haven an overview of the situation. Space is saved in the distribution board thanks to the new
narrow width of only 9 mm (0.5 modular width). The On-Off switches are easy to operate and the
switched position is always clearly recognisable. Depending on requirements, the switch position
can also be indicated by a built-in yellow LED. The pushbuttons are excellently suitable for for-
warding pulse control commands, e.g. in lighting controls. The operating state of the luminous
pushbutton variants can be signalled. The indicator lights are optimally used to signal or report
back an operating state.

Private electrical installations

All E210 devices can be used in subdistribution boards of multiple or single-family dwellings and
other private buildings. Optimum operability and / or signalling of operating states is made easily
possible.

Examples:
– Phase monitoring
– Signalling the operating state of a pond pump
– Switching machines in a DIY workshop
– Switching additional garden lighting On / Off
– Visualising the garden/garage door position

Commercial installations
In guesthouses, hotels, storage halls, small workshops, construction sites and other commercial
operations, the E210 devices enable easy switching, control and signalling, thus providing a clear
general picture of current operating states.

Examples:
– Outdoor lighting systems
– Additional electric heaters
– Visual status indication of machines and devices (e.g. a fan)
– Outdoor sockets
– Hotel reception (switching and / or monitoring functions)

Industrial installations
The E210 product range is also used in all industrial establishments.

Examples:
– Phase monitoring
– Manual flap controls (ventilation systems)
– Switching pumps On / Off
– Manual - 0 - Automatic changeover
– Manual changeover of two-speed machines

0/4 Applications | Technical catalogue

 Integration of modular installation devices (on-off switches, pushbuttons and indicator lights) in
the subdistribution board affords the additional advantage of intelligible signalling of electric loads‘
operating states. Easy operation or interpretation of devices is ensured by the clearly recognizable
switching position (toggle lever) and / or a status display by means of an LED light. Depending on
the system requirements, further signalling or control functionality for reliable operation can be used
in the subdistribution board in the form of pushbuttons or indicator lights.

Electric heating devices On-off switches, pushbuttons and pushbuttons with LED
Manual direct or pulse-controlled On / Off switching of additional heating
elements, e.g. in DIY workshops or other purpose-built installations.

Lighting systems On-off switches

As master switches for multiple-phase lighting sections, e.g. in halls, large
basement rooms or provisional constructions.

Pushbuttons and pushbuttons with LED (puls contact operation)

Issuing of commands to latching relay or miniature contactors with visual
feedback.

Air conditioners and fans On-off switches or pushbuttons

Connecting air conditioners or ventilation fans as required.

Change over switches or group switches I-0-II

Switching over fans with two operating levels

Group switches I-0-II

Manual - 0 - Automatic changeover (from normal to emergency mains)

Signalling On-off switches or pushbuttons with LED

Clear signalling and indication of the operating states of electric loads.

Indicator lights
Phase monitoring display
Signalling On, Off or Danger (colours, e.g. green, red, yellow)

Technical catalogue | Applications 0/5

Sample applications
On-off switches and control switches

Additional garden lighting

On-off switches E211-16-20 (2NO contacts) and indicator lights E219-D
– On-off control for additional garden light
– The green indicator light in the cetral distribution board shows whether
the garden light is ON or OFF

Room ventilator with status display

Control switches E218-25-31 (3NO + 1NC contacts) and E219-D48; E219-C48
– On-off function control of a ventilator
– Integrated signal lamp 24 V for status detection is directly embedded at the ventilator
– The green and red indicator lights 12-48 V show the current operating position in
the central distribution board

1/1 Sample applications | Technical catalogue

Change over switches and group switches

Flap gate control

Change over switches E213-16-001 with position I-II (1CO contact) and E219-G; E219-B
– Contol of a manual flap gate position with central visualization
– The blue indicator light shows that the flap gate is open
– The white indicator light shines in closed state

Electrical room heater

Group switches E214-16-101 with position I-0-II (1CO contact) and E219-E; E219-G
– Changeover switching of manual control to time switch mode,
e. g. for an additional heater
– The yellow indicator light shows that the control mode occurs manually
– The heater is set on automatic control when the blue E219-G shines

Technical catalogue | Sample applications 1/2

Sample applications
Push buttons

Room lighting (fluorescent-tubes)

Pushbuttons mit 1NO contact (impulse) with geen LED
– Lighting system with latching relay (impulse switching relais)
– The green LED which is integrated in the pushbutton shines when the lighting group
has the status ON

1/3 Sample applications | Technical catalogue

Multiple indicator lights

L1 L1

L2 L2

L3 L3

N N

PE PE

L1 L1

N N

L3 L3

L2 L2

Network and phase control

Multiple indicator lights E219-3D (3x green LEDs)
– All LEDs shine  Net is working
– If one phase breaks down, the green LED turns off
 Attention! Phase break down in the network

L1 L1

L2 L2

L3 L3

N N

PE PE

97 95 97 95
N N

2 4 6 98 96 2 4 6 98 96

M M
3~ 3~

X4 X4

X2 X2

Signaling motor OFF Signaling motor ON

Motor status display

Multiple indicator lights E219-2CD (1x green, 1x red LED)
– ABB three-phase contactor (remote controlled with 2 auxiliary contacts (1NO + 1NC))
– The current operating mode of the motor drive is visualized over auxiliary contacts.

Technical catalogue | Sample applications 1/4

Sample applications
Multiple indicator lights

L1 L1

L2 L2

L3 L3

N N

PE PE

L1 L1
97 95 97 95
N N

2 4 6 98 96 2 4 6 98 96

M M
3~ 3~

L3 L3

L2 L2

Signaling motor OFF Signaling motor ON

Motor status display

Multiple indicator lights E219-3CDE (1x green, 1x yellow, 1x red LED)
– ABB polyphase contact gate (remote control) with 2 auxiliary contacts (1NO + 1NC)
– The current operating mode of the motor drive is visualized over contactor
auxiliary contacts
– The error indication occurs over the signalling contact of the motor protection relay

1/5 Sample applications | Technical catalogue

L1

L2

L3

PE

L1
97 95
N

2 4 6 98 96

M
3~

L3

L2

Signaling motor interference

on basis of thermal overload

Motor status display (off and interuption)

Multiple indicator lights E219-3CDE (1x green, 1x yellow, 1x red LED)
– A thermal activation is signalized by the use of motor protection relay contacts
– Motor off = green LED on; closed motor protection relay contact = yellow LED
shows interference

Technical catalogue | Sample applications 1/6

Characteristics
On-off switches, change over switches and group switches

The On-Off switches, pushbuttons and indicator light units open up new space-saving and modern
installation possibilities.

The units are for switching, controlling or signalling part of electrical systems or specific items of
equipment. The new Series E210 units are available in widths of 9 mm (0.5 modular width) or 18 mm
(1.0 modular width).

On-Off switches, 16 A, 25 A and 32 A

These switches are installed directly in the subdistribution board and are used as manual master
switches for direct On / Off switching of courtyard or basement lighting systems, ventilation and air
conditioning systems, fans or special lighting systems with gas discharge lamps.
Module width depends on the contact configuration.
1 + 2 switching contacts = 9 mm (0,5 modular width)
3 + 4 switching contacts = 18 mm (1 modular width)

On-Off switches, 16 A and 25 A with switch position indication

The unit‘s switched position is signalled clearly by the integrated LED. Thanks to the easily visible
lit amber LED, which operating states the various items of equipment are in is clearly recognisable
on the distribution board.
Module width depends on the contact configuration.
1 switching contact + LED = 9 mm (0.5 modular width)
2 + 3 switching contacts + LED = 18 mm (1 modular width)

Change over switches, 16 A and 25 A

With its two switched positions, the change over switch is used in industry and building manage-
ment systems. Clear recognisability of the switch‘s settings I and II enables reliable and easy use.
Applications consist of switching over from normal to emergency lighting, changing over an outdoor
lighting system with light sensor to normal operation and many other possibilities.
Module width depends on the contact configuration.
1 changeover contact = 9 mm (0.5 modular width)
2 changeover contacts = 18 mm (1 modular width)

Group switches I-0-II 16 A and 25 A

The group switches offer universal application possibilities in industry, building management systems
and house installations. They are used in lighting and machine control systems, for example. Using
these units, a Manual - 0 - Automatic control can be realised with ease.
Module width depends on the contact configuration.
1 changeover contact = 9 mm (0.5 modular width)
2 changeover contacts = 18 mm (1 modular width)

2/1 Characteristics | Technical catalogue

Control switches, pushbuttons and indicator lights

Control switches, 16 A and 25 A

The control switches are used in electric control cabinets or house distribution boards. They offer
universal possibilities of use with their diverse variants. They perform the task of forwarding control
commands.
Module width depends on the contact configuration.
1 + 2 switching contacts = 9 mm (0.5 modular width)
3 + 4 switching contacts = 18 mm (1 modular width)

Pushbutton, 16 A - 6 different pushbutton colours (Pulse contact operation)

Normal pushbuttons are always equipped with a normally-open and a normally-closed contact.
The pushbuttons‘ various colours (six colours) are based on DIN60204-1 (colour marking of ope-
rator control parts and their significance). These pushbutton devices are suitable for forwarding
pulse control command in almost every electrical system. They can also be used to operate ligh-
ting groups by means of a pulse command, e.g. to a latching relay or directly on the spot from the
subdistribution board or the distribution cabinet. Module width is always 9 mm (0.5 modular width)

Pushbutton, 16 A with LED - 5 different colours (Pulse contact operation)

The pushbuttons with an LED are equipped with only one contact (normally open or closed).
Here, you have to choose between a normally-open or normally-closed version. The LED lights,
various colours, are based on DIN60204-1 (colour marking of operator control parts and their
significance).
The pushbuttons with LED are excellently suitable for signalling or reporting back the operating
state of loads controlled.
e.g. pump On = green LED lit; pump Off = LED not lit

The pushbuttons with LED are available in 12-48 V versions for DC or AC voltage, 115-250 VAC
voltage and 60-220 VDC voltage.

Indicator lights with 1 LED - 5 different LED colours

The indicator lights warrant a clear overview of the operating states of electrical equipment from
one central location. The long useful life of LED technology promises maintenance-free operation
for up to 100,000 hours.
For comparison: the incandescent bulbs previously used had a maximum operating operating
time of 10,000 hours.

The indicator lights are available in 12-48 V versions for DC or AC voltage, 115-250 VAC voltage
and in a version for 60-220 VDC voltage.

All code colours white, red, green, yellow and blue are available for the well-known functions:

Neutral = white
Emergency = red
Normal operation = green
Abormal operation = yellow
Compelling action = blue

Technical catalogue | Characteristics 2/2

Characteristics
multiple indicator lights

Multiple indicator lights with 2 or 3 LEDs

These indicator lights are perfectly suited to the visualisation of on and off states. These devices
can be used in private electrical equipment, commercial buildings or industrial switchgears. This
application can be implemented in the smallest space in the apartment or control distributor.

The indicator lights are available with LEDs in the colours green and red, 3x red or in the traffic light
colours red, yellow and green. Two different voltage ranges are available:
2 LEDs versions: 115-250 VAC or 12-48 VAC/DC
3 LEDs versions: 415/250 VAC
Module width is always 9 mm (0.5 modular width)

All code colours white, red, green, yellow and blue are available for the well-known functions:

Neutral = white
Emergency = red
Normal operation = green
Abormal operation = yellow
Compelling action = blue

2/3 Characteristics | Technical catalogue

Set new standards in your electrical distribution board

The reduced device width saves space while providing the same functionality and improved performance

9 mm solution from AB
B
The

More space plus improved performance

Technical catalogue | Characteristics 2/4

 Characteristics
Special features

Switch position
clearly recognisable
Fast mounting
Easily accessible with latching function

Indicator lights
5 different colours (red, green, yellow, blue, white)

Cross-head recessed screws

Pozidrive 1 ( captive )

Can be used in the SMISSLINE socket system

Reliable connection terminals

with integrated shutter

Pushbutton
6 different colours (grey, red, green, yellow, black, blue)

2/5 Characteristics | Technical catalogue

 Impressive solutions at a glance
On-off switches, pushbuttons, indicator lights
– Touch protection to DIN EN 50274 (DIN VDE0660 Part 514)
– Reliable and convenient operation
– Colour-fast LEDs: 5 colours for luminous pushbuttons and indicator lights
– LED voltage ranges: 12-48 VAC/DC; 115-250 VAC; 60-220 VDC
– Multiple indicator lights with 2 or 3 LEDs
– Maintenance-free LED light source (up to 100,000 h)
– Consistent innovative design
– Dissipated power optimised
– Compliance with international standards

Multiple indicator lights

with 2 or 3 LEDs

Type designation and schematic

with lasting laser marking

Visual switch position indication

by On/Off switches (with LED light)

Uniform design
ABB pro M compact device family

On/Off switch, lockable

in the On or Off setting

Technical catalogue | Characteristics 2/6

Device overview
On-off switches, change over switches, group switches, control switches

On-off switches

On-off switches with LED

Change over switches

Group switches

Control switches

3/1 Device overview | Technical catalogue

Pushbuttons, indicator lights and accessories

Pushbuttons

Pushbuttons with LED

Indicator lights

Accessories

for 9 and 18 mm

Dummy housings (attachable) Padlock

Technical catalogue | Device overview 3/2

Ordering data
On-off switches

On-Off switches, 16 A, 25 A and 32 A

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated current = 16 A
1 NO 250 0.32 - 9 E211-16-10 2CCA703000R0001 938575 0.035 10
2 NO 250,400 0.82 - 9 E211-16-20 2CCA703005R0001 938582 0.045 10
3 NO 250,400 1.14 - 18 E211-16-30 2CCA703010R0001 938599 0.080 10
4 NO 250,400 1.64 - 18 E211-16-40 2CCA703015R0001 938605 0.090 10

Rated current = 25 A
1 NO 250 0.75 - 9 E211-25-10 2CCA703001R0001 938612 0.035 10
2 NO 250,400 1.95 - 9 E211-25-20 2CCA703006R0001 938629 0.045 10
3 NO 250,400 2.70 - 18 E211-25-30 2CCA703011R0001 938636 0.080 10
4 NO 250,400 3.90 - 18 E211-25-40 2CCA703016R0001 938643 0.090 10

Rated current = 32 A
1 NO 250 1.12 - 9 E211-32-10 2CCA703002R0001 938650 0.035 10
2 NO 250,400 2.73 - 9 E211-32-20 2CCA703007R0001 938667 0.045 10
3 NO 250,400 3.85 - 18 E211-32-30 2CCA703012R0001 938674 0.080 10
4 NO 250,400 5.46 - 18 E211-32-40 2CCA703017R0001 938681 0.090 10

On-Off switches, 16 A and 25 A with switch position indication

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated current = 16 A
1 NO 250 0.50 9 E211X-16-10 2CCA703100R0001 938872 0.040 10
2 NO 250,400 1.00 18 E211X-16-20 2CCA703110R0001 938889 0.050 10
3 NO 250,400 1.50 18 E211X-16-30 2CCA703115R0001 938896 0.060 10

Rated current = 25 A
1 NO 250 1.15 9 E211X-25-10 2CCA703101R0001 938902 0.040 10
2 NO 250,400 2.30 18 E211X-25-20 2CCA703111R0001 938919 0.050 10
3 NO 250,400 3.45 18 E211X-25-30 2CCA703116R0001 938926 0.060 10

NO = normally-open contact

4/1 Ordering data | Technical catalogue

Change over switches and group switches

Change over switches, 16 A and 25 A

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated current = 16 A
1 CO 250 0.32 - 9 E213-16-001 2CCA703040R0001 938698 0.041 10
2 CO 250 0.82 - 18 E213-16-002 2CCA703045R0001 938704 0.082 10

Rated current = 25 A
1 CO 250 0.40 - 9 E213-25-001 2CCA703041R0001 938711 0.041 10
2 CO 250 0.88 - 18 E213-25-002 2CCA703046R0001 938728 0.082 10

Group switches I-0-II 16 A and 25 A

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated current = 16 A
1 CO 250 0.32 - 9 E214-16-101 2CCA703025R0001 938735 0.041 10
2 CO 250 0.82 - 18 E214-16-202 2CCA703030R0001 938742 0.082 10

Rated current = 25 A
1 CO 250 0.40 - 9 E214-25-101 2CCA703026R0001 938759 0.041 10
2 CO 250 0.88 - 18 E214-25-202 2CCA703031R0001 938766 0.082 10

CO = changeover contact

Technical catalogue | Ordering data 4/2

Ordering data
Control switches and pushbuttons

Control switches, 16 A and 25 A

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated current = 16 A
1NO+1NC 250 0.50 - 9 E218-16-11 2CCA703050R0001 938773 0.041 10
2NO+2NC 250 1.00 - 18 E218-16-22 2CCA703060R0001 938780 0.082 10
3NO+1NC 250 1.50 - 18 E218-16-31 2CCA703065R0001 938797 0.082 10

Rated current = 25 A
1NO+1NC 250 0.75 - 9 E218-25-11 2CCA703051R0001 938803 0.041 10

Pushbutton, 16 A - 6 different pushbutton colours (Pulse contact operation)

Contact Rated Power Button Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated current = 16 A
1NO+1NC 250 0.50 9 E215-16-11B 2CCA703150R0001 938810 0.046 10
1NO+1NC 250 0.50 9 E215-16-11C 2CCA703151R0001 938827 0.046 10
1NO+1NC 250 0.50 9 E215-16-11D 2CCA703152R0001 938834 0.046 10
1NO+1NC 250 0.50 9 E215-16-11E 2CCA703153R0001 938841 0.046 10
1NO+1NC 250 0.50 9 E215-16-11F 2CCA703154R0001 938858 0.046 10
1NO+1NC 250 0.50 9 E215-16-11G 2CCA703155R0001 938865 0.046 10

NO = normally-open contact
NC = normally-closed contact

4/3 Ordering data | Technical catalogue

Pushbuttons with LED

Pushbutton, 16 A, lit - 5 different LED colours (Pulse contact operation)

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated LED voltage = 115-250 VAC

1 NO 250 1.10 9 E217-16-10B 2CCA703160R0001 938988 0.050 10
1 NO 250 1.10 9 E217-16-10C 2CCA703161R0001 938995 0.050 10
1 NO 250 1.10 9 E217-16-10D 2CCA703162R0001 939008 0.050 10
1 NO 250 1.10 9 E217-16-10E 2CCA703163R0001 939015 0.050 10
1 NO 250 1.10 9 E217-16-10G 2CCA703164R0001 939022 0.050 10

1 NC 250 1.10 9 E217-16-01B 2CCA703250R0001 939084 0.050 10

1 NC 250 1.10 9 E217-16-01C 2CCA703251R0001 939091 0.050 10
1 NC 250 1.10 9 E217-16-01D 2CCA703252R0001 939107 0.050 10
1 NC 250 1.10 9 E217-16-01E 2CCA703253R0001 939114 0.050 10
1 NC 250 1.10 9 E217-16-01G 2CCA703254R0001 939121 0.050 10

Rated LED voltage = 12-48 VAC/DC

1 NO 250 0.72 9 E217-16-10B48 2CCA703170R0001 938933 0.050 10
1 NO 250 0.72 9 E217-16-10C48 2CCA703171R0001 938940 0.050 10
1 NO 250 0.72 9 E217-16-10D48 2CCA703172R0001 938957 0.050 10
1 NO 250 0.72 9 E217-16-10E48 2CCA703173R0001 938964 0.050 10
1 NO 250 0.72 9 E217-16-10G48 2CCA703174R0001 938971 0.050 10

1 NC 250 0.72 9 E217-16-01B48 2CCA703260R0001 939039 0.050 10

1 NC 250 0.72 9 E217-16-01C48 2CCA703261R0001 939046 0.050 10
1 NC 250 0.72 9 E217-16-01D48 2CCA703262R0001 939957 0.050 10
1 NC 250 0.72 9 E217-16-01E48 2CCA703263R0001 939964 0.050 10
1 NC 250 0.72 9 E217-16-01G48 2CCA703264R0001 939971 0.050 10

Rated LED voltage = 60-220 VDC

1 NO 250 1.50 9 E217-16-10B220 2CCA703165R0001 939138 0.050 10
1 NO 250 1.50 9 E217-16-10C220 2CCA703166R0001 939145 0.050 10
1 NO 250 1.50 9 E217-16-10D220 2CCA703167R0001 939152 0.050 10
1 NO 250 1.50 9 E217-16-10E220 2CCA703168R0001 939169 0.050 10
1 NO 250 1.50 9 E217-16-10G220 2CCA703169R0001 939176 0.050 10

1 NC 250 1.50 9 E217-16-01B220 2CCA703255R0001 939183 0.050 10

1 NC 250 1.50 9 E217-16-01C220 2CCA703256R0001 939190 0.050 10
1 NC 250 1.50 9 E217-16-01D220 2CCA703257R0001 939206 0.050 10
1 NC 250 1.50 9 E217-16-01E220 2CCA703258R0001 939213 0.050 10
1 NC 250 1.50 9 E217-16-01G220 2CCA703259R0001 939220 0.050 10

NO = normally-open contact
NC = normally-closed contact

Technical catalogue | Ordering data 4/4

Ordering data
Indicator lights

Indicator lights with 1 LED - 5 different colours

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated LED voltage = 115-250 VAC

- - 0.47 9 E219-B 2CCA703400R0001 939282 0.04 10
- - 0.47 9 E219-C 2CCA703401R0001 939299 0.04 10
- - 0.47 9 E219-D 2CCA703402R0001 939305 0.04 10
- - 0.47 9 E219-E 2CCA703403R0001 939312 0.04 10
- - 0.47 9 E219-G 2CCA703404R0001 939329 0.04 10

Rated LED voltage = 12-48 VAC/DC

- - 0.40 9 E219-B48 2CCA703420R0001 939237 0.04 10
- - 0.40 9 E219-C48 2CCA703421R0001 939244 0.04 10
- - 0.40 9 E219-D48 2CCA703422R0001 939251 0.04 10
- - 0.40 9 E219-E48 2CCA703423R0001 939268 0.04 10
- - 0.40 9 E219-G48 2CCA703424R0001 939275 0.04 10

Rated LED voltage = 60-220 VDC

- - 1.00 9 E219-B220 2CCA703405R0001 939336 0.04 10
- - 1.00 9 E219-C220 2CCA703406R0001 939343 0.04 10
- - 1.00 9 E219-D220 2CCA703407R0001 939350 0.04 10
- - 1.00 9 E219-E220 2CCA703408R0001 939367 0.04 10
- - 1.00 9 E219-G220 2CCA703409R0001 939374 0.04 10

All code colours white, red, green, amber and blue are available for the well-known functions:
Neutral = white
Emergency = red
Normal operation = green
Abnormal operation = yellow
Compelling action = blue

4/5 Ordering data | Technical catalogue

Multiple indicator lights and accessories

Multiple indicator lights with 2 LEDs

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated LED voltage = 115-250 VAC

- - 0.8 9 E219-2CD 2CCA703910R0001 413330 0.042 10

Rated LED voltage = 12-48 VAC

- - 0.8 9 E219-2CD48 2CCA703911R0001 413347 0.042 10

Multiple indicator lights with 3 LEDs

Contact Rated Power LED Width Order data Product No. Bbn Weight Pack.
config. volt- loss colour 7612270 per unit unit
age
VAC W mm Type EAN kg unit

Rated LED voltage = 415/250 VAC

- - 1.2 9 E219-3C 2CCA703900R0001 413309 0.044 10
- - 1.2 9 E219-3D 2CCA703901R0001 413316 0.044 10
- - 1.2 9 E219-3CDE 2CCA703902R0001 413323 0.044 10

Accessories for the E210 device series

Width Order data Product No. Bbn Weight Pack.
7612270 per unit unit

mm Type EAN kg unit
Dummy housings 9 E210-DH 2CCA703480R0001 404208 0.18 10
The modular width of 18 mm must be complied with to use the devices in the SMISSLINE socket system. The dummy
housing is ready-made with two expanding connectors. Always snap on dummy housings on the left.

Padlock E210-ASV9 2CCA703648R0001 404215 10

for 9 and 18 mm wide units

Technical catalogue | Ordering data 4/6

Technical data
On-off switches

General
Overall depth 68 mm
Width 0.5 or 1 module (9 or 18 mm)
Colour grey, RAL 7035
Climatic resistance to IEC 60068-2-2 (dry heat)
IEC 60068-2-30 (humid heat)
IEC 60068-2-1 (low temperatures)
Ambient temperature - 25°C to + 55°C
Storage temperature - 40°C to + 70°C
Connection cross-section (Cu) from 1 x 1 mm2 to 1 x 6 mm2 or 2 x 2.5 mm2 solid;
from 1x 0.75 mm2 to 2 x 1.5 mm2 flexible
with end ferrule or pin cable lug
Tightening torque 1,2-1,5 Nm
Contacts Double interrupting

On-off switches (E211; E211X)

Short-circuit withstand capacity Inc 3 kA; at 400 V cos j = 0.8 (with fusing <
_ 35 A / NH00)
Rated current In 16 A, 25 A, 32 A
Rated voltage Un
in accordance with EN 250 VAC, 400 VAC
in accordance UL 508 240 VAC
Rated impulse withstand voltage Uimp 6 kV
Lowest operating voltage 24 VAC; 25 mA
Isolating features to EN60669-2-4; IEC/EN 60947-3
Utilization category AC-22 A, DC-22 A acc. IEC/EN 60947-3
LED voltage ranges On-off switches E211X 115-250 VAC (Tolerance +/- 10%)
Frequency 50/60 Hz
Sealable in the On and Off positions
Standards DIN EN 60669-1 *VDE 0632-1
DIN EN 60669-2-4 *VDE 0632-2-4
UL 508
Approvals VDE; UL; GOST; CCC

Utilization category for E211 On-off switches (according to standard IEC 60947-3)
Type IN Utilization category
DC-22 A AC-22 A
E211-16-... 16 A 50 VDC / 16 A 200 VDC / 1 A 400 VAC / 16 A
E211-25-... 25 A 50 VDC / 25 A 200 VDC / 2 A 400 VDC / 25 A
E211-32-...- 32 A 50 VDC / 32 A 200 VDC / 3 A 400 VDC / 32 A

5/1 Technical data | Technical catalogue

Change over, Group and control switches, pushbuttons and indicator lights

Change over, Group and Control switches (E213; E214; E218)

Rated current In 16 A, 25 A
Rated voltage Un
in accordance with EN 250 VAC, 400 VAC
in accordance UL 508 240 VAC
Lowest operating voltage 24 VAC; 25 mA
Frequency 50/60 Hz
Switches sealable in the On and Off positions
Standards DIN EN 60669-1 *VDE 0632-1
UL 508
Approvals VDE; UL; GOST; CCC

Pushbuttons without and with LED (E215; E217)

Rated current In 16 A
Rated voltage Un
in accordance with EN 250 VAC
in accordance UL 508 240 VAC
Lowest operating voltage 24 VAC; 25 mA
LED voltage ranges 12-48 VAC / DC; 115-250 VAC; 60-220 VDC (Tolerance +/- 10%)
Frequency 50/60 Hz
Standards DIN EN 60669-1 *VDE 0632-1
UL 508
Approvals VDE; UL; GOST; CCC

Indicator lights (E219)

LED voltage ranges 12-48 VAC / DC; 115-250 VAC; 60-220 VDC (Tolerance +/- 10%)
Frequency 50/60 Hz
Insulation voltage 250 V
Rated impulse withstand voltage Uimp 4 kV
Dissipated power 0.47-1 W
Standards DIN EN 62094-1
UL 508
Approvals VDE; UL; GOST; *1

Indicator lights with 2 LEDs

LED voltage ranges 115-250 VAC; 12-48 VAC (tolerance +/- 10%)
Frequency 50/60 Hz
Insulation voltage 250 V
Rated impulse withstand voltage U imp 4 kV
Dissipated power 0.8 W
Standards DIN EN 62094-1
Approvals VDE; GOST; *1

Indicator lights with 3 LEDs

LED voltage ranges 415/250 VAC (tolerance +/- 10%)
Frequency 50/60 Hz
Insulation voltage 250 V
Rated impulse withstand voltage U imp 4 kV
Dissipated power 1.2 W
Standards DIN EN 62094-1
Approvals VDE; GOST; *1

* 1 = CCC approval not required

Technical catalogue | Technical data 5/2
Technical data
On-off switches 16 A and 25 A

On-off switches 16 A DC switching capacity E211 16 A

U/V

500
400

300

220

100

70
60
50
40 Ohmic load
30 Normally-open contact
Normally-closed contact
20
Load with time constant
t = 15ms (inductive load)
Normally-open contact
10 Normally-closed contact
1 2 3 4 5 6 7 10 15 18
16
I /A

On-off switches 25 A DC switching capacity E211 25 A

U/V

500
400

300

220

100

70
60
50
40 Ohmic load
30 Normally-open contact
Normally-closed contact
20
Load with time constant
t = 15ms (inductive load)
Normally-open contact
10 Normally-closed contact
1 2 3 4 5 6 10 16 25 30
I /A

5/3 Technical data | Technical catalogue

On-off switches 32 A

On-off switches 32 A DC switching capacity E211 32 A

U/V

500
400

300

200

100

70
60
50
40 Ohmic load
30 Normally-open contact
Normally-closed contact
20
Load with time constant
t = 15ms (inductive load)
Normally-open contact
10 Normally-closed contact
1 2 3 4 5 6 7 10 16 20 30 40
32
I /A

Technical catalogue | Technical data 5/4

Technical data
Pushbuttons and indicator lights

Pushbuttons and indicator lights

Overview of general meanings of the colours of operator control parts
(excerpt from VDE 0199 or DIN EN 60073).

Colour Meaning Explanation Application examples

RED Emergency Action in hazardous situations EMERGENCY STOP, STOP or OFF

or emergency with EMERGENCY STOP pushbutton
Initiating an emergency function

YELLOW Abnormal Action if an abnormal condition is present Intervention required to suppress the
abnormal condition, manual intervention to
restart an interrupted automatic cycle

GREEN Safety Action in safe conditions or to prepare Activation

a normal condition

BLUE Regulation Status requiring action Reset function

WHITE Non-specific Functions start Available for any functions except,

GREY except for emergency stop, e.g.
BLACK ON/OFF; Stop/Start

5/5 Technical data | Technical catalogue

Technical catalogue | Technical data 5/6
Dimensions (in mm)
Switches

Switches Switch, 1+2-pole

16 A, 25 A and 32 A

Switch, 3+4-pole

5/0 Dimensions | Technical catalogue

Pushbuttons and indicator lights

Pushbuttons

Indicator lights

Technischer Katalog | Dimensions 5/1

Approval and standards
Switches, pushbuttons, indicator lights

Germany Denmark Norway Russia Switzer- USA Poland China Shipping classification
land companies

VDE DEMKO NEMKO GOST ESTI cURus BBJ CCC RINA GL LR

Switches E211
Cange over switches E213
Group switches E214
Control switches E218
Pushbuttons E215
Luminous pushbuttons E217
Indicator lights E219
(1 LED)
Indicator lights E219
(2 & 3 LEDs)

devices are approved

in preparation
not required

6/1 Approval and standards | Technical catalogue

Contact

Belgium Ireland Singapur

2CCC441003C0201
ABB ELECTRO n.v. Asea Brown Boveri Ltd. ABB Industry Pte Ltd
Hoge Wei, 27 Belgrad Road, Tallaght 2 Ayer Rajah Crescent
1930 Zaventem Dublin 24 Singapore 139935
Belgium Ireland Telephone +65 6776 5711
Telephone +32 (0) 27 18 63 11 Telephone +35 31 40 57 30 0 Telefax +65 6778 0222
Telefax +32 (0) 27 18 66 66 Telefax +35 31 40 57 33 2
www.abb.com.sg
www.abb.be www.abb.com/lowvoltage
Spain
Brasil Italy ABB Automation Products, S.A.
ABB Ltda ABB SACE S.p.A. c/Torrent de l’Olla 220
Av. dos Autonomistas, 1496 Line Protection Devices 08012 Barcelona
06020-902-Osasco-SP Viale dell‘Industria, 18 Spain
Brasil 20010 Vittuone (MI) Telephone +34 93 48 42 10 4
Telephone +55 (0) 80 00 14 91 11 Italy Telefax +34 93 48 42 20 1
Telefax +55 (11) 36 88 99 77 Telephone +39 02 90 34 1
Telefax +39 02 90 34 76 09 www.abb.es
www.abb.com.br
www.abb.it Sweden
Czech Republic ABB Automation
ABB s.r.o. Netherland Technologies Cewe Control
Herspická 13 ABB b.v. Motorgräd 20
61900 Brno Automation Products 72161 Västeras
Czech Republic George Hintzenweg 81 Sweden
Telephone +420 54 31 45 50 3 3068 AV Rotterdam Telephone +46 (0) 21 32 07 00
Telefax +420 54 32 43 48 9 Postbus 301 Telefax +46 (0) 21 12 60 01
3000 AH Rotterdam
www.abb.cz/elsynn Netherland www.abb.se
Telephone +31 (0) 10 40 78 91 1
Denmark Telefax +31 (0) 10 40 78 09 0 ABB Switzerland Ltd.
ABB AS CMC Low Voltage Products
Meterbuen 33 www.abb.nl Fulachstrasse 150
2740 Skovlunde CH-8201 Schaffhausen
Denmark Norway Tel. +41 (0)58 586 41 11
Telephone +45 44 50 44 50 ABB AS Fax +41 (0)58 586 42 22
Telefax +45 44 50 44 60 Jacob Borchsgt. 6 E-mail: [email protected]
P.O. Box 797 Brakeroya
www.abb.dk 3002 Drammen www.abb.ch
Norway
Finland Telephone +47 32 24 80 00 Thailand
ABB OY Telefax +47 32 24 79 34 ABB LIMITED
Domestic Sales 161/1 SG Tower, 1st-4th Floor,
Hiomotie 13 www.abb.no Soi Mahadlekluang 3,
P.O. Box 182 Rajdamri Road, Lumpini, Pathumwan,
00381 Helsinki Poland Bangkok 10330
Finland ABB Sp. z o.o. Thailand
Telephone +358 10 22 20 00 Automation Products Telephone +66 (0) 2665 1000
Telefax +358 10 22 22 91 3 ul. Zeganska 1 Telefax +66 (0) 2665 1043
04-713 Warszawa
www.abb.fi Poland www.abb.co.th
Telephone +48 22 51 64 441
France Telefax +48 22 51 64 444 Ukraine
ABB Entrelec ABB Ltd, Ukraine
Division Commercial France www.abb.pl Automation Products Low Voltage
300 rue des Prés Seigneurs 4, Ivana Lepse Blvd.
ZA La Boisse – BP 90145 P.R. China Kiev 67, 03680
01124 Montluel Cedex ABB (China) Ltd Ukraine
France Universal Plaza, 10 Jiuxianqiao Lu Telephone +380 44 495 22 11
Telephone +33 (0) 825 38 63 55 Chaoyang District Telefax +380 44 495 22 10
Telefax +33 (0) 825 87 09 26 100016 Beijing
P.R. China www.abb.ua
www.abb.fr Telephone +86 10 8456 6688
Telefax +86 10 8456 9907
Great Britain
ABB Limited www.abb.com.cn Due to possible changes in regulatory requirements and
Tower Court, Foleshill Enterprise Park materials, the characteristics and dimensions stated in
Courtaulds Way Russian Federation this catalogue are only to be considered as binding after
CV6 5NX Coventry ABB Industrial & Building Systems Ltd. confirmation from ABB.
GB-United Kingdom 30/1, bld. 2 Obrucheva St.
Telephone +44 (0) 24 76 36 85 00 117861 Moscow; Russia
Telefax +44 (0) 24 76 36 44 99 Telephone +7 495 960 2200
Telefax +7 495 960 2220

ABB
www.abb.co.uk
www.abb.ru/ibs Power and productivity
for a better world TM