Mobile Wi-Fi Router

ME-C30G Manual
 Table of Contents

Introduction ....................................................................................................................................................... 1
Before you use ................................................................................................................................................ 1
Disclaimer ....................................................................................................................................................... 1
Checking Accessories ...................................................................................................................................... 2
Operating environment .................................................................................................................................. 2
Safety Precautions .............................................................................................................................................. 3
Notes ME-C30G body ..................................................................................................................................... 4
Notes of internal battery................................................................................................................................ 7
Notes of AC adapter ....................................................................................................................................... 8
Handing of medical electrical equipment ........................................................................................................ 11
Handing Precautions ......................................................................................................................................... 12
About common ............................................................................................................................................. 12
About the product ........................................................................................................................................ 12
About the SIM card ....................................................................................................................................... 12
Notes on use wireless LAN ........................................................................................................................... 13
1. Before use of the product ............................................................................................................................. 14
1.1 Part Names and Functions ...................................................................................................................... 14
1.2 LED Status Display ................................................................................................................................... 15
1.3 Mounting / Removing the SIM card ........................................................................................................ 17
1.4 Charge of the product ............................................................................................................................. 19
2. Setup .............................................................................................................................................................. 21
2.1 Power ON/OFF ....................................................................................................................................... 21
2.2 Wireless LAN connection ........................................................................................................................ 22
3. Settings .......................................................................................................................................................... 37
3.1 ME-C30G configuration Tool .................................................................................................................. 37
3.2 Easy Setup ............................................................................................................................................... 39
3.3 Checking the status ................................................................................................................................. 43
3.4 Communication settings ......................................................................................................................... 46
3.5 System Configuration ............................................................................................................................. 70
4. Trouble Guide ................................................................................................................................................ 74
4.1 Check Point ............................................................................................................................................. 74
5. Appendix ........................................................................................................................................................ 75
5.1 Main Features ......................................................................................................................................... 75
5.2 ME-C30G Setting List............................................................................................................................... 77
5.3 Warranty and After Sales Service ........................................................................................................... 82
5.4 Export Administration Regulations ........................................................................................................ 83
5.5 Intellectual Property Rights .................................................................................................................... 83

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

2
 Introduction
Thank you for purchasing Mobile Wi-Fi Router ME-C30G, please read this manual carefully and use properly

Before you use

- Because the product is using wireless, you cannot use it in some places that radio waves cannot reach such as
in tunnels, underground, the building, where the signal is weak or out of the service area. Additionally, you may
not be able to use it in even vantage point on the upper floors of high-rise apartment buildings, etc..
· If the radio wave condition is constantly worse, it may cause sudden communication interruption.
Communication may be interrupted even in the good radio wave condition. Please be forewarned.

· Although the product has a high confidentiality, because it uses radio waves, we cannot sure that a third party
will not be able to intercept the communication. Please understand about it.
· When the SIM card is not installed, you cannot use it

Disclaimer

- We don’t take any responsibility for natural disaster such as earthquake, lightning, or any action by the third.
For damage caused intentionally, negligence, misuse, or by the use of under extraordinary conditions, please
understand in advance that there are not responsible.
· Please note that we are not responsible for subsidiary disadvantages (changes in the information content and
loss, loss of business profits, business interruption, etc.) from using or unable to use
· For damages or losses caused by not reading the manual, please understand that we are not responsible.
· For damages by malfunction because of combination with specified device or software, please note that we are
not responsible
· There may be lost or modification of primarily downloaded data as a result of repair or handling others, but we
are not responsible for that kind of data recovery or lost profits, damages.
· The contents that are registered on your own is unable to guarantee regardless of the cause of failure or fault.
Please keep it in order to minimize the damage and loss due to changes in the information content, if the
content is important, such as taking a separate note。

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

1
 Checking Accessories
The package you have purchased contains the following items. Please check before you use

ME-C30G (Terminal) AC adapter

Micro USB cable

Operating environment

Support OS Windows 8® 32bit/64bit English(Service Pack No)

Windows 7® 32bit/64bit English (Service Pack 1)
®
Windows Vista 32bit/64bit English (Service Pack 2)
Windows XP® 32bit English (Service Pack 3)
Mac OS X 10.6～10.8 English （Intel）
iOS 4.3 ～ 6.0
Android 2.2 ～ 4.1
Enabled browser Internet Explorer 7 ～ 10
Safari 5 ～ 6
Firefox 14 ～ 15
Google Chrome 21

· Explorer 10 is only compatible with Windows 8 .

· Safari 6 is only compatible with Mac OS 10.8.
· Any other OS environments other than the above OS may not work.
· We can not guarantee whether or not operation for the upgrade of OS.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

2
 Safety Precautions
This "Safety Precautions" contains the contents for any license to prevent from damage to property and
information about using safely and correctly the product. Please be sure to read。

The following classification of each symbol, which describes the extent of the harm or damage, explains when
you use the product if you have ignored this precautions

Classification of symbols below describes what you keep in mind about precautions.

Explanation of symbols

This symbol shows the prohibitions in the usage of the product (Do not do it)
prohibitions

This symbol shows not to disassemble the product. If you did, it is possible a risk
of injury
Disassemble

This symbol shows not to be exposed to the water. There is a risk of electric
shock or fire due to leakage and wet in the water
Caution wet

This symbol shows not to be touched with wet hands .There is a risk of electric
shock and treat the product with wet hands
Wet hands prohibited

This symbol shows the instructions of the usage of the product.

Instruction

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

3
Notes ME-C30G body

Risk

Do not use the product at a place exposed to direct sunlight and leave the
product in the car when it is, hot weather, near a heater or in a place
subject to high temperatures.
prohibitions It may cause malfunction, overheating, fire, and deformation of the device. The
product also becomes hot, it may cause burns.

Please do not use near heat or high-precision electronic devices.

May affect the operation of electronic equipment (such as fire alarms, automatic
doors and other electric appliances and medical hearing aids, heart pacemakers). If
prohibitions you are using, consult your dealer or the manufacturer.

Please do not heat, disassemble, modifications.

It may cause damage or fire, injury, electric shock. Modification of the product is
Disassemble a violation of the law.

Please do not touch with wet hands.

Wet hands It may cause electric shock or malfunction.
prohibited
Please do not put in the water.
It may cause malfunction, overheating, fire, or electric shock. Please do not use in
a place where there is a risk, such as near the glass, liquid spills. If liquid is spilled,
Caution wet it may cause malfunction, overheating, fire, or electric shock.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

4
 Warning

Please do not fall from a high place, and make a strong shock.
It can cause equipment failure, fire, or people's injury as fever

prohibitions
Please do not contact the conductive foreign substance to USB connector and
insert foreign objects in the gap of USB connector.

prohibitions It may cause malfunction, overheating, fire, or electric shock.

Please do not use the product in an area where is flammable gas station, etc
It may cause an explosion or fire.

prohibitions
Don’ place in a high-pressure vessel, such as a microwave oven and cooking
equipment, Please do not place it on an electromagnetic cooker.

prohibitions It may cause of the failure or malfunction.

Please only use the devices which are included this package.
you don’t use a device other than those specified. It may cause overheating, fire,
explosion or other damage.
prohibitions
Please do not use in locations that are prohibited, such as an airplane or in a
hospital. It may affect electronic device or medical equipment.
It will be the cause of the accident.
prohibitions
If you do not use for a long time, please unplug the product from your computer.
It may cause an electric shock, fire, or malfunction.

prohibitions
If the product is leaked, please stop using immediately.

If you continue to use, it may cause electric shock or malfunction.

Instruction
If lightning begins during use at outdoor, please move them to a safe place
immediately.
It may cause electric shock or lightning.
Instruction

The abnormal state of smoke or a strange smell occurs, please remove the product
from your computer.
If you continue to use, it may cause heat or fire. When you noticed unusualness,
Instruction
please do not use immediately.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

5
 Caution

Please do not place on where is uneven or shaky, unstable.

If you drop the product, it causes malfunction or damage.
prohibitions
Please do not leave the product close to magnetic card.
Magnetic data, such as cash cards, credit cards, telephone cards, floppy disk will be
prohibitions lost.

Please do not apply excessive force to the product, the SIM card.

prohibitions It may cause malfunction or injury.

Please do not use other SIM card other than the specified SIM card.
If you use a card other than those specified, it may cause data loss or malfunction.
prohibitions

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

6
Notes of internal battery

Risk

Please do not use nothing but the specified AC adapter for charging.

Instruction

When battery fluid leaks, and it get an eyeful, please wash your eye with
clean water and please get treated immediately by a physician.
Instruction There is a risk of blindness

Warning

If battery fluid leaks, smell something, please stop using it immediately and move
away from the fire.
Instruction

If charging is completed for more than a expected charging time, please stop
charging.
Instruction

Caution

When battery fluid leaks, and it touch your skin or clothing, please wash skin
or clothing with clean water immediately
Instruction

Please charge at the range of 0 ~ 35 ℃ temperature..

Instruction

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

7
Notes of AC adapter

Risk

Please do not use the AC adapter other than the product

Instruction

Please connect the AC adapter directly into the wall outlet.

Instruction

Do not use the product at a place exposed to direct sunlight and leave the
product in the car when it is, hot weather, near a heater or in a place subject to
prohibitions
high temperatures

Please do not put in a microwave or high pressure container

prohibitions

Please do not use voltages other than the power supply voltage which is displayed
on the label.
prohibitions

Please do not disassemble or modification.

Disassemble It may cause damage, fire, injury or electric shock.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

8
 Warning

Don’t press strong impact to the product and please do not throw

prohibitions

Please do not contact the conductive foreign object to the product.

prohibitions

If the AC adapter cable is damaged, please do not use.

prohibitions

If battery fluid leaks, smell something, please stop using it immediately and move
away from the fire.
prohibitions

If charging is completed for more than a expected charging time, please stop
charging.
prohibitions

Please do not wrap a cloth

prohibitions

Please do not place heavy objects on the product

prohibitions

Please do not place in dusty place

prohibitions

When you unplug the AC adapter from wall outlet, please do not pull on the cord of
AC adapter.
prohibitions
It may cause fire or electric shock.

Please do not touch with wet hands.

It may cause electric shock or malfunction.
Wet hands prohibited

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

9
 Caution

Please do not place on where is uneven or shaky, unstable

If you drop the product, it causes malfunction or damage.
prohibitions

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

10
 Handing of medical electrical equipment
Is what "Guidelines on the use of mobile phone terminals, etc. in order to prevent the effects of radio waves on
electronic medical equipment," the contents of this description was referring to the contents of the Council
(Environment radio).

Warning

Please use observe the following in medical institutions. To (CCU) is do not bring
the product monitoring room and coronary artery disease (ICU) operating rooms,
intensive care. In hospital wards, please turn off the power of the product. Even
where they are allowed to use the product, such as the lobby, if you have a medical
Instruction
electrical equipment in the vicinity, please turn off the power of the product.
Medical institutions to use individuall. Prohibition for, if you are not allowed, such as
defining the location, please follow the instructions of the medical institution.

If you have installed a defibrillator implantable cardiac pacemakers and implantable,

please carry and use more than 22cm away from the incoming charge the product.
May affect the operation of pacemakers and implantable cardioverter-defibrillator
Instruction
implantable cardiac by radio waves.

At the location, such as in a mixture of the crowded train, implantable cardiac

pacemakers and planted in the vicinity. There is a possibility that has been installed
defibrillators included, please turn off the power to the product. May affect the
operation of cardiac pacemakers and implantable cardioverter defibrillator
Instruction
implantable radio waves.

If the outside of medical institutions, we will be using electronic medical equipment

other than implantable cardioverter defibrillators and implantable cardiac
pacemaker due to home treatment, please check with manufacturers and other
Instruction electronic medical equipment individually about the impact of radio waves. It may
affect the operation of electronic medical equipment by radio waves.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

11
 Handing Precautions
About common
· Please wipe with a soft, dry cloth (such as wiping glasses).

If you wipe with an alcohol, thinner, benzene, or detergents, printing might disappear or fade.

· Please clean terminal sometimes with a dry cotton or swab.

Poor terminal contact will cause the power off, please wipe with a dry cotton or swab. Also, be careful not to
damage the pin when cleaning
· Please do not put close to the air conditioner vent.

Condensation due to rapid temperature changes will cause damage to internal corrosion.

· Please be sure not to put excessive force to the product.

· Do not put in a bag packed with many things. If you sit on the product, it may damage the internal infrastructure,
and the cause of the failure.

About the product

· Please avoid extreme hot or cold environment, humid, direct sunlight, and dusty places.
· Don’t use the product near your phone, radio, or television. It can cause an adverse effect, should be used in
remote locations as possible.
· Do not drop the product, please do not give it a shock.
It may cause malfunction or damage .

· During use, if the product becomes warm, but It is not a trouble. Keep use it.
· Day of rain and snow, if you intend to use in a location exposed to moisture, do not expose to water. The
product is not waterproof specification.

About the SIM card

· While the removal / installation of the SIM card, please do not put unnecessary force.

· metal surface (IC part) should always be clean.

· Please wipe with a soft, dry cloth (such as wiping glasses).
· Do not damage the IC, or do not touch it carelessly, and please do not cause a short-circuit。
It may cause data loss or malfunction
· Do not drop the SIM card, and please do not give a impact。
It will cause loss of data or damage.
· Do not bend the SIM card, please do not place heavy objects on it.
It may cause data loss or malfunction
· please do not install a SIM card to the product with the labels or stickers attached on it,.
It will cause loss of data or damage.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

12
 Notes on use wireless LAN
■For wireless LAN
Please do not use where electromagnetic waves are generated or the place which is magnetized AV OA equipment,
electric equipments。
Because of increase of noise and magnetic or electrical noise, it will not be able to communicate. Especially, when
using a microwave.
It may cause harmful interference near a TV, radio, etc., the TV screen may be distorted.
If a plurality of wireless LAN access points are using the same channel, it might not be scanned correctly.

■For frequency band

The seal is affixed to the back surface of the product indicates that the wireless device uses the band 2.4GHz and
adopted OFDM DS-SS as a modulation method and the interference is assumed as a distance 40m.

■Notes on Using 2.4GHz equipment

Frequency band that the product uses, specified low-power and the radio stations (radio stations requiring a
license) for mobile identification that is used in such production line of the factory as well as medical equipment,
scientific and other industrial microwave are operational (radio stations requiring a license) and amateur radio
stations (radio stations do not require a license).

1. Please before you use the product, make sure that operational amateur radio station and specified low-power
radio stations and radio stations for mobile identification are not in the vicinity..

2. Please stop using the product or change the frequency band immediately when the case of harmful
interference occurs for radio stations for mobile identification from the product,.

■About Security
In a wireless LAN, the advantage for making a bird spear and information on wireless LAN equipment, between the
wireless LAN access point using radio waves instead of LAN cable, LAN connection you is going to be available
freely as long as the radio waves reach have. On the other hand, when if within radio reach, to reach all the places
beyond the obstacle is not set for security, there is a risk or to intercept the communication content, or the
intrusion. The product, "WPA2-PSK" in the state of purchase has been set. We recommend that you consider the
safety, without changing the security mode, only change the initial password will be using the product. For
information on how to configure security, please refer to the manual included.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

13
1. Before use of the product
1.1 Part Names and Functions

➊ Power button

➍ Micro USB connector

➋ LED Status Display ➎ Reset button

➌ SIM card slot

Name Function
➊ Power button To turn on the product, press power button for more than 2 seconds. To
turn off the product, press power button for more than 3 seconds.
➋ LED status display State of the product is displayed
➌ SIM card slot SIM card slot to insert SIM card
➍ Micro USB connector Connect the micro USB cable.
➎ Reset button By pressing the power button for more than about 5 seconds, the setting
of the product will be reset and the settings will return to the state at the
time of purchase.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

14
1.2 LED Status Display

Represents the reception level of the 2G network: 2G status

LED Status Display State of the product

Red Out of the range

SIM card not inserted
Connect failure
PIN lock
Waiting for PIN input
Flashing red Weak LTE/3G/2G level
Flashing green Connected to the network (not the Internet)
Blue Strong level of communication (possible to access Internet)

Represents the reception level of the 3G network: 3G Status。

LED Status Display State of the product
Red SIM card is not inserted
Connect failure
PIN lock
Waiting for PIN input
Flashing red Weak LTE/3G/2G level
Flashing green Connected to the network (not the Internet)
Blue Strong reception level of communication (possible to access
Internet)

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

15
Represents the reception level of the LTE network: LTE Status。
LED Status Display State of the product
Red SIM card is not inserted
Connect failure
PIN lock
Waiting for PIN input
Flashing red Weak LTE/3G/2G level
Flashing green Connected to the network (not the Internet)
Blue Strong reception level of communication (possible to access
Internet)

Represents the connection status of wireless LAN equipment: LAN radio status。
LED Status Display State of the product
Flashing green Preparing a wireless LAN
Green Wireless LAN ready (wireless LAN connection from the device is
possible.)
Blue Wireless LAN device is connected to one or more

Represents the amount of battery: battery status。

LED Status Display State of the product
Blue 10% or more battery power
Flashing Red Less than 10% battery level
Red Charging
Green Fully charged

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

16
1.3 Mounting / Removing the SIM card
SIM cards are IC card information, such as your phone number, has been recorded. Please install the SIM card into
the product in order to use the product. If you do not install to the product, you are unable to use data
communications.

1.3.1 Mounting
1. When the power of the product is on, turn off the power by pressing the power button for about 3 seconds.
Also, when the micro USB cable is connected to the product, please remove it.
2. Open the SIM card slot cover, make sure that IC part should be upside, insert it in the direction of the arrow.
Please insert the SIM card until it makes the click
3. Close the SIM card slot cover。

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

17
1.3.2 Removing
1. When the power of the product is on, turn off the power by pressing the power button for about 3 seconds.
Also, when the micro USB cable is connected to the product, you have to remove it。

2. Open the SIM card slot cover, press and release the SIM card until you hear a click, SIM card comes out a little。
3. Pull in the direction of the arrow and remove SIM card。
4. Close the SIM card slot cover。

· Please do not touch IC part of SIM card and do not scratch。

· Do not install or remove SIM card by force. It may cause damage。
· It will cause damage if you insert a SIM card in the opposite direction。
· Do not install or remove the SIM card when the product is power ON. It may cause damage.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

18
1.4 Charge of the product
At the time of purchase, the internal battery is not fully charged. When is your first time, please be sure to charge
them before using。

1.4.1 Charging with AC adapter

1. Connect the Micro USB cable to the USB connector of the product。
2. Connect to the AC adapter connector on the other end and plug it into the AC outlet plug of AC adapter for
home-use micro USB cable。

3. Battery status indicator lights up in red while charging and green lights when charging is complete。

1.4.2 Charging with PC

1. Connect the micro USB cable to the USB connector of the product.
2. Connect to the USB port of the PC Connect the other end of the micro USB cable。
3. Battery status indicator lights up in red while charging and green lights when charging is complete.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

19
 Charge mode Estimated charging time
When using the AC adapter About 3.5 hours
When using PC About 5.5 hours

· During charging, please use the micro USB cable and AC adapter included with the product.
· When installing a micro USB cable, please attach reasonably in the right direction. Attempting to install
in the reverse direction can cause damage or failure.
· This is a guideline time that assumes a charging when the product is turned ON. And it depends on the
usage period of the built-in battery and temperature

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

20
2. Setup
This page will explain how to connect to the wireless LAN equipment and the product

2.1 Power ON/OFF

1. When the product is turned off, press and hold the power button for about 2 seconds。
When the power is turned on, the LED status lights will be lighted in the order of red, green, blue, then green
light will be last for about 6 seconds at the end。

2. When the product is turned off, press and hold the power button for about 3 seconds。
When the power is turned off, LED status lamp will be lighted red in the order of 3G, LTE status lamp, lamp
status of wireless LAN.

Power button

· Estimated usage time is as follows.

Communication Method Continuous time Continuous standby time

LTE About 5.3 hours

about 300 hours
3G About 7 hours
2G About 9 hours

· A measure of the time that can be used in a state that can receive radio waves properly is possible to

change by the setting status of the environment and use of the product, due to radio wave conditions.

It can also be shorten gradually by repeated charging and discharging。

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

21
2.2 Wireless LAN connection
2.2.1 How to connect with windows PC
■ Windows 7/Vista
It is described an example of the standard connectivity features of Windows 7 OS in this chapter.

1. Press and hold the Power ON button for about two seconds for the power of the product.
After Power LED changes to RED color and it is possible to ready usage of wireless LAN. And then LAN
wireless status LED will be changed to green color

2. Enable wireless LAN function of the computer.

How to enable the wireless LAN function of the computer is different for each model, please refer to the owner's
manual of your computer
3. Select next step
“Start menu” -> control panel-> Network & internet -> View network status and tasks. 。

4. Select "Connect to a network".

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

22
5. Select the item which is displayed MEC30G_XXXXXXXXXXXX. And then click the "Connect" button to
access internet. The initial value of the SSID of the product is printed on a label on the back side of the
product. If you change the settings, you have to change the configured SSID in configuration Tool

6. Enter the security key.

The initial value of the SSID of the product is printed on a label on the back side of the product. If you want to
change it, you should change by using WEB UI.

7. If you can not access internet, please try again 3~4 step again.
And then check the status of the wireless LAN connection.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

23
■Windows 8
It is described an example of the standard connectivity features of Windows 8 OS in this chapter

1. Press and hold the Power ON button for about two seconds for the power of the product.

After Power LED changes to RED color and it is possible to ready usage of wireless LAN. And then LAN wireless
status LED will be changed to green color .

2. Enable wireless LAN function of the computer.

How to enable the wireless LAN function of the computer is different for each model, please refer to the owner's
manual of your computer .

3. After displaying the menu by moving the cursor to the top right of the screen "Start", please click on the “Settings”

4. Please click this icon。

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

24
5. Select the item which is displayed MEC30G_XXXXXXXXXXXX. And then click the "Connect" button to
access internet.
The initial value of the SSID of the product is printed on a label on the back side of the product. If you change
the settings, you have to change the configured SSID in configuration Tool

6. After enter the security key, and the click "Next" button.
The initial value of the SSID of the product is printed on a label on the back side of the product. If you want to change it,
you should change by using WEB UI

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

25
7. After checking the status of wireless LAN connection, you have to check internet access .

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

26
 ■Windows XP
It is described an example of the standard connectivity features of Windows XP OS in this chapter .

1. Press and hold the Power ON button for about two seconds for the power of the product.

After Power LED changes to RED color and it is possible to ready usage of wireless LAN. And then LAN
wireless status LED will be changed to green color .
2. Enable wireless LAN function of the computer.

How to enable the wireless LAN function of the computer is different for each model, please refer to the
owner's manual of your computer
3. Please choose next step “Start menu”->”control panel”->"Network & Internet Connection"..
By way of the control panel display, "Network Connections" can be selected directly。

4. Select the "Wireless Networks" and then select "Wireless Network available。
5. Select the item which is displayed MEC30G_XXXXXXXXXXXX. And then click the "Connect" button to access
internet.
The initial value of the SSID of the product is printed on a label on the back side of the product. If you change
the settings, you have to change the configured SSID in configuration Tool

6. Entered the security key in the "Confirm network key" and "Network key" field, and then click "Next" button.
The initial value of the SSID of the product is printed on a label on the back side of the product. If you want

to change it, you should change by using WEB UI

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

27
7. After checking the status of wireless LAN connection, you have to check internet access .

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

28
2.2.2 How to connect with iPad
In this chapter, it will be described based on iOS 5.1.1.

1. Press and hold the Power ON button for 2 seconds to turn on the product.

After turning on, when it is ready for use wireless LAN, LAN wireless status LED will be lighted green.

2. Select "Settings" on the home screen of the iPad。

3. Go to the "Wi-Fi" menu and turn on Wi-Fi. Then, select the SSID of the product (MEC30G_XXXXXXXXXXXX).

The initial value of the SSID of the product is printed on a label on the back side of the product. If you change the settings,
you have to change the configured SSID in configuration Tool

4. Select the "Connect" button, enter the security key field "Password"。
Choose the "connect” button, write the security key in the “password” column.
The initial value of the security key for the product is WPA2 KEY, printed on a label on the back side of the

product. If you change the settings, enter the security key that you’ve changed

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

29
5. Make sure that a check mark is on the left side of selected SSID and this icon appears on the left side of
status bar

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

30
2.2.3 How to connect with iPhone /iPod touch
In this chapter, it will be described based on iOS 5.0.1 (iPhone).

1. Press and hold the Power ON button for 2 seconds to turn on the product.
After turning on, when it is ready for use wireless LAN, LAN wireless status LED will be lighted green.

2. Select "Settings" on the home screen of the iPhone/iPod Touch

3. Go to the "Wi-Fi" menu and turn on Wi-Fi. Then, select the SSID(MEC30G_XXXXXXXXXXXX). of the product.
The initial value of the SSID of the product is printed on a label on the back side of the product. If you want
to change it, you should change by using WEB UI.

4. Select the "Connect" button, enter the security key field "Password".
Choose the "connect” button, write the security key in the “password” column.
The initial value of the security key for the product is WPA2 KEY, printed on a label on the back side of the

product. If you change the settings, enter the security key that you’ve changed。

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

31
5. Make sure that a check mark is on the left side of selected SSID and this icon appears on the left side
of status bar.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

32
2.2.4 How to connect with Android tablet
In this chapter, it has been described as an example the Android 4.0. For Android OS, the screen image may be
different for each model.

1. Press and hold the Power ON button for 2 seconds to turn on the product..
After turning on, when it is ready for use wireless LAN, LAN wireless status LED will be lighted green.

2. Select "Settings" on the home screen of the Android tablet.

3. Go to the "Wi-Fi" menu and turn on Wi-Fi. Then, select the SSID(MEC30G_XXXXXXXXXXXX). of the product.
The initial value of the SSID of the product is printed on a label on the back side of the product. If you want to change it,
you should change by using WEB UI

4. Select the "Connect" button, enter the security key field "Password".
Choose the "connect” button, write the security key in the “password” column.
The initial value of the security key for the product is WPA2 KEY, printed on a label on the back side of the
product. If you change the settings, enter the security key that you’ve changed。

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

33
5. Make sure that a check mark is on the left side of selected SSID and this icon appears on the left side of
status bar

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

34
2.2.5 How to connect with Android Smartphone
In this chapter, it has been described as an example the Android 4.0. For Android OS, the screen image may be
different for each model

1. Press and hold the Power ON button for 2 seconds to turn on the product.
After turning on, when it is ready for use wireless LAN, LAN wireless status LED will be lighted green

2. Select "Settings" on the home screen of the Android Smartphone.

3. Go to the "Wi-Fi" menu and turn on Wi-Fi .

4. Select the SSID(FS010W_XXXXXXXXXXXX). of the product 。

The initial value of the SSID of the product is printed on a label on the back side of the product. If you want
to change it, you should change by using WEB UI .

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

35
5. Select the "Connect" button, enter the security key field "Password".
Choose the "connect” button, write the security key in the “password” column.
The initial value of the security key for the product is WPA2 KEY, printed on a label on the back side of the
product. If you change the settings, enter the security key that you’ve changed.

6. Make sure that a check mark is on the left side of selected SSID and this icon appears on the left side of
status bar

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

36
3. Settings
3.1 ME-C30G configuration Tool
It is possible to access to set a setting value for the product using the Web browser of the connected device.

3.1.1 Starting and logging configuration tool

1. Connect the wireless LAN equipment such as a personal computer and the product.
For more information on the product and the wireless LAN connection procedure, refer to "Wireless LAN
connection with the product 2.2".

2. After starting a Web browser of wireless LAN equipment, and then enter "http://192.168.255.1/" in the
address field. It will appear the login screen.

3. Click the "Login" and enter the password in the password field.
Screen image has been described by way of Internet Explorer 9 in windows 7. Login password is set to
"1234" at the time of purchase of the product. We recommend the other value for security reasons.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

37
3.1.2 About configuration tool
➋ ➌ ➍

➊ Setup Menu ：When it is clicked each of item, it will display to setup the product
➋ State of the product ： Displays the status of the product.
Item Description
State of SIM Valid SIM card is inserted。
SIM card need not be inserted, SIM card is inserted invalid, the input of the
PIN code is required to enter the PIN lock or unlock code。

Signal Level
「Low」 「High」

Battry Level
「Low」 「High」

「Charging」

➌ Logout ：Click to logout icon and will be closed the configuration tool.
➍ Manual ： Click a manual icon you can download the manual from the configuration tool。
➎ Setting ：Display the current Network name, Network type, IMEI, IP/ DNS address and
total connection time

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

38
3.2 Easy Setup
After purchasing the product, settings will be displayed after logging in the Configuration Tool. You can do the
necessary settings through Easy setting. Setting information can be modified through Easy setting .

1. In step 1, set the profile information of the product. After entering the connection information of the SIM card,
click the "Next" button.
Please refer to the user manual of the SIM card information on your SIM card connection

Items Description settin Initial

Profile name Enter the name of profile name g
Up to 50 alphanumeric No value
characters
(, " : ; \\ < > & except)
Username Enter the username that was provided from Up to 64 single-byte No
network provider characters
(, " : ; \\ < > & except)
Password Enter the password that was provided from Up to 64 single-byte No
network provider characters
(, " : ; \\ < > & except)
APN Enter the APN that was provided from Up to 100 single-byte No
network provider. characters
(, " : ; \\ < > & except)
Authentication Select an authentication method that was PAP PAP
method provided from network provider.。 CHAP

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

39
2. In step 2, set the SSID of the product. Please click "Next" if there is no need to change.

3. In step 3, set the wireless LAN security of the product. If you do not need to modify, click "Next" button.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

40
4. In step 4, change the login password with the configuration tool of the product. Click "skip" button if there is no
need to change or if you want to change the settings, enter the configuration settings, then click "Next" button.

5. In step 5, check the overall setting information. After that, save the settings by clicking on the "Setup
complete" button.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

41
6. Click “OK” button to complete Easy setting.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

42
3.3 Checking the status
You can check about the state of the product such as the network and wireless LAN.

3.3.1 WAN Status

It indicates about the state of the Internet。

Items Description

Network Name Connected operator name will be displayed

Network (3G/LTE) Connected network architecture will be displayed
Phone number Phone number registered in the SIM card will be displayed
IMEI IMEI of the product will be displayed
IP address IP address assigned by the network will be displayed

DNS server Primary and secondary DNS address assigned by network will be
displayed

Connection time Network connection cumulative time from power ON will be displayed

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

43
3.3.2 Wireless LAN Status
It is displayed on the status of wireless LAN。

Items description
IP address Wireless LAN IP address of the product will be displayed.

MAC address MAC address of the wireless LAN of the product will be displayed
Subnet mask The value of the subnet mask will be displayed.

SSID SSID that is currently set will be displayed.

SSID stealth SSID stealth function enable/disable state will be displayed

802.11 authentication Wireless LAN authentication method that is currently set will be
displayed.
The number of wireless LAN The number of wireless LAN devices that are currently connected to
connection the product will be displayed.
Information connected Information of the wireless LAN device connected to the product
equipment (name of the current connected device and MAC address) will be
displayed.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

44
3.3.3. Version Information
It displays a Software version of the product and model name.

Items Description
Software version Display the software version of the product..

Model name ME-C30G is the model name of the product.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

45
3.4 Communication settings
This chapter explains how to make setting for internet connection.

3.4.1 WAN
You have to do the settings for Internet connection following by service provider.

3.4.1.1 SIM Card Setting

Setting for the SIM Card you are using.
If you enter the wrong PIN three times, you need PIN unlock code. For PIN unlock code, please contact the

operator or agent.

■In case you want to use PIN Code, while the PIN Code is being disabled

Setting Items Description Setting Value Initial Value

PIN Code Status The status of the PIN Code of the SIM - Disable
Card in use will be displayed
PIN Code Operation Enable/Disable/Change the PIN Code Enable Enable
of the SIM Card in use
Current PIN Code Input the PIN Code of the SIM Card in 4～8 Digits No
use.
Remaining numbers The remaining trial numbers of PIN - 3
to input PIN Code Code will be displayed.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

46
■In case of authenticating the PIN code, while the PIN Code is being enabled

Setting Items Description Setting Value Initial Value

PIN Code Status The status of the PIN Code of the SIM - Enable
Card in use will be displayed
PIN Code Operation Enable/Disable/Change the PIN Code Authenticate Authenticate
of the SIM Card in use

Current PIN Code Input the PIN Code of the SIM Card in 4-8 Digits No
use.

Remaining numbers The remaining trial numbers of PIN - 3

to input PIN Code Code will be displayed.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

47
■In case you want to unlock the PIN Code, while the PIN Code is being enabled

Setting Items Description Setting Value Initial Value

PIN Code Status The status of the PIN Code of the SIM - Enable
Card in use will be displayed
PIN Code Operation Enable/Disable/Change the PIN Code Authenticate Authenticate
of the SIM Card in use

Current PIN Code Input the PIN Code of the SIM Card in 4～8 Digits No
use.

Remaining numbers The remaining trial numbers of PIN - 3

to input PIN Code Code will be displayed.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

48
■In case of changing the PIN Code, while the PIN Code is being enabled

Setting Items Description Setting Value Initial Value

PIN Code Status The status of the PIN Code of the SIM - Enable
Card in use will be displayed
PIN Code Operation Enable/Disable/Change the PIN Code Disable Disable
of the SIM Card in use Change

Current PIN Code Input the PIN Code of the SIM Card in 4～8 Digits No
use.

New PIN Code Input the new PIN Code of the SIM 4～8 Digits No
Card in use
New PIN Code Re-input the new PIN Code of the SIM 4～8 Digits No
Confirmation Card in use for confirmation
Remaining numbers The remaining trial numbers of PIN - 3
to input PIN Code Code will be displayed.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

49
■In case of unlocking PIN Code, while the PIN Code is being locked

Setting Items Description Setting Initial Value

PIN U n l o c k C o d e Input PUK Code to unlock the locked 8 Digits Value No
(PUK Code) PIN Code of the SIM Card in use

New PIN Code Input the new PIN Code 4～8 Digits No

New PIN Code Re-input the new PIN Code for 4～8 Digits No
Confirmation confirmation
Remaining numbers to The remaining trial numbers of - 10
input PIN Code unlocking the PIN Code will be
displayed.

· For PIN Code/PIN Unlock Code, please enter the proper numbers specified from the operator
· Make sure to keep PIN Code/PIN Unlock Code in secret
· Make sure not to use easy numbers such as your phone number or date of birth
· If you input the wrong PIN Code 3 times, the PIN Code will be locked. In this case, contact your agency for more
information on PIN Unlock Code.
· If you input the PIN Unlock Code (PUK Code) 10 times, the SIM Card will be completely locked. In this case, contact
your operator for more information.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

50
3.4.1.2 Network Setup
Make settings for the network you are using

Setting Items Description Setting Value Initial Value

Communication Set the communication method of Auto Auto
Method the network you want to use LTE Only
3G Only

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

51
3.4.1.3 Connection Setting
Set the connection information to connect to the network

Setting Items Description Setting Value Initial Value

Profile List Choose the profile to connect to the Maximum 10 units No
network (Simultaneously)

· If you change the settings of the profile list, the product will automatically restart.

· After re-booting, check the wireless LAN connection between the wireles LAN equipment and the product.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

52
3.4.1.4 Profile Setting
Configure the settings on the details of the connection information to use when connect to the network. To
create the new profile, click NEW button. To edit the current profile, choose the profile you want to edit from
the profile list and click Edit button.
Please refer to the user manual of the SIM Card Information on your SIM Card connection.

Items displayed Description Setting Value Initial Value

Profile List Choose the profile to use when Maximum 10 profiles No
connects to the network
Profile Name The profile name of the currently - No
selected profile is displayed
Username The username of the currently - No
selected profile is displayed
Password The password of the currently - No
selected profile is displayed
APN The APN of the currently selected - No
profile appears
Authentication The authentication method of the - No
Method currently selected profile is displayed

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

53
■In case of creating the new profile
Fill in the blank below and click SAVE button to apply the settings

■In case of editing the current profile

Add/Modify each item of the current profile and click SAVE button to apply the settings

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

54
 Setting Items Description Setting Value Initial Value
Profile Name Input the profile name Up to 50 alphanumeric No
Characters
(Except " : ; // < > &)
Username Enter the username designated by the Up to 63 Characters No
operator (Except " : ; // < > &)
Password Enter the password designated by Up to 63 Characters No
the operator (Except " : ; // < > &)
APN Enter the APN designated by the Up to 100 Characters No
operator (Except " : ; // < > &)
Authentication Set the authentication method PAP PAP
Method specified from the operator CHAP

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

61
3.4.2 Wireless LAN
Make settings for the wireless LAN function

3.4.2.1 Basic Settings

Make settings related to the basic function of the wireless LAN

Setting Items Description Setting Value Initial Value

SSID Set SSID of the product Maximum 32 ※1
alphanumeric characters
Channel Set Channel to be used Auto、1～13 Auto

SSID Stealth Set SSID not displayed on the wireless Enable, Disable Disable
LAN equipment
Wireless LAN Set the time to turn off the wireless Disable, 10、30、60 min Disable
Automatic off-timer LAN automatically, in case that there
is no connection for a certain period
between the wireless LAN equipment
and the product
※1：For default setting, please refer to the seal on the back side of the product

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

62
3.4.2.2 Security Settings
Configure the settings for wireless LAN security

Setting Items Description Setting Value Initial Value

802.11 Authentication Set the authentication method when No Encryption WPA2-PSK
you connect to a wireless LAN Open Shared
WPA-PSK
WPA2-PSK
WPA/WPA2-PSK

WPA Encryption Set the encryption method of 802.11 TKIP AES

Scheme Authentication in case of WPA-PSK, AES
WPA2-PSK, WPA/WPA2-PSK TKIP+AES
WPA Pre-shared Set the security key of 802.11 8 to 63 alphanumeric ※1
Key Authentication in case of WPA-PSK, characters
WPA2-PSK, WPA/WPA2-PSK
Current WEP Key Set the WEP Key when 802.11 WEP Key 1～4 WEP Key 1
A u t h e n t i c a t i o n i s Open or
Shared
WEP Key 1～4 Set the WEP Key when 802.11 Enter 5 digit alphanumeric No
A u t h e n t i c a t i o n i s Open or characters or 16 digit
Shared hexadecimal numbers to set a
64 bit key or enter 13 digit
alphanumeric characters or
26 digit hexadecimal numbers
to set a 128 bit key
※1：For default setting, please refer to the seal on the back side of the product

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

63
3.4.2.3 DHCP Setting
Make settings for DHCP

Setting Items Description S Initial Value S D

IP Address Configure the private IP Address of 0.0.0.0e ～ e
192.168.255.1 e
t t s
the product 255.255.255.255
t t c
Subnet Mask Set the subnet mask of the product 0.0.0.0i ～ 255.255.255.0
i r
255.255.255.255
n n i
DHCP Server Set DHCP Server Enableg Enable
g p
Disable t
Start IP Address Set the minimum value of the private 0.0.0.0V ～ I
192.168.255.20i
IP Address to the wireless LAN a
255.255.255.255 t o
l e n
device connected to the product
u m
End IP Address Set the maximum value of the private 0.0.0.0 ～ 192.168.255.40
e s
IP Address to the wireless LAN 255.255.255.255
device connected to the product
DHCP Lease Time Set the lease time of IP Address 120 ～ 2147483647 43200
(In seconds) assigned to the wireless LAN device
DNS Setting Set DNS Server Address Auto Auto
Manual
Primary DNS Set IP Address of the primary DNS 0.0.0.0 ～ No
Server 255.255.255.255
Secondary DNS Set IP Address of the secondary DNS 0.0.0.0 ～ No
Server 255.255.255.255

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

64
3.4.3 Firewall
Make setting for Firewall function

3.4.3.1 MAC Address Filtering Configuration

Make setting for MAC Address Filtering function

■In case of illegal MAC Address Filtering Mode

Setting Items Description Setting Value Initial Value

MAC Address Set MAC Address Filtering function Disable, Allow, Deny Disable
Filtering Mode

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

65
■In case that MAC Address Filtering Mode is enabled

Setting Items Description Setting Value Initial Value

MAC Address Set MAC Address Filtering function Disable, Allow, Deny Disable
Filtering Mode
MAC Address Set MAC Address of the wireless LAN 00:00:00:00:00:00 ～ No
device that you allow/deny the FF:FF:FF:FF:FF:FF
connection

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

66
3.4.3.2 IP Address Filtering Configuration
Make settings for IP Address Filtering Function

Setting Items Description Setting Value Initial Value

IP Address Filtering Set IP Address Filtering function Enable, Disable Disable
Group
Classification Choose Allow/Deny, if IP Address Allow, Deny Deny
Filtering function is enabled.
Protocol Set the protocol for IP Filtering TCP、UDP、ICMP TCP

WAN IP Address Set IP Address of WAN for IP Filtering 0.0.0.0 ～ No

255.255.255.255
LAN Port Number Set Port Number of LAN for IP 1 ～ 65535 No
Filtering
Rule Name Set the name for IP Filtering Up to 32 alphanumeric No
characters

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

67
3.4.4 NAT
Configure NAT Setting

3.4.4.1 Port Forwarding

Configure Port Forwarding Setting

Setting Items Description Setting Value Initial Value

LAN IP Address Set IP Address of LAN that you want 0.0.0.0 ～ No
to port mapping 255.255.255.255
LAN Port Number Set Port Number of LAN that you want 1 ～ 65535 No
to port mapping
WAN Port Number Set Port Number of WAN that you 1 ～ 65535 No
want to port mapping
Protocol Set the Protocol that you want to TCP、UDP、ICMP TCP
port mapping
Rule Name Set the name for the port mapping Up to 32 alphanumeric No
characters

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

68
3.4.4.2 DMZ Setting
Configure DMZ Setting

Setting Items Description Setting Value Initial Value

DMZ Setting Enable/Disable DMZ function. Enable, Disable Disable

DMZ IP Address Set IP Address of the LAN where you 0.0.0.0 ～ No

want DMZ function 255.255.255.255

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

69
3.5 System Configuration
Settings for the system of the product

3.5.1 Password Change

Change the login password in the configuration tool.

Setting Items Description Setting Value Initial Value

Current Password Input the current password Up to 15 alphanumeric characters No
New Password Input the new password Up to 15 alphanumeric characters No
Confirm new Input the new password for Up to 15 alphanumeric characters No
Password confirmation

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

70
3.5.2 Factory Default Setting
You can return to the status when you purchase the product. And you also can backup and restore the current
configuration information.

3.5.2.1 Factory Settings

1. Click initialize button.
2. Once you click initialize button, the product will re-boot. Make sure that the wireless LAN connection with the
product.

3.5.2.2 Backup and Restore

Please note that this function is not available for Tablet PC or Mobile devices.

■In case of backup

1. Click Backup button in the column "Backup configuration Information"
2. The configuration information will be saved in your PC.
「3.4.1.1Note that the setting information of SIM Card is not saved

■In case of restoring

1. Click the browse button in the column "Restoring Configuration Information.
2. Choose the product configuration information file stored in your PC.
3. Click Restore button and the configuration information of the product will be restored.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

71
3.5.3 Software Upgrade
Please note that this function is not available for Tablet PC or Mobile devices.

1. Click browse button and choose the software file.

2. Click start button and the software upgrade will start.
3. Once the upgrade is completed, the product will re-boot automatically. After re-booting, make sure the wireless LAN
connection with the product.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

72
3.5.4 Re-booting the product
Re-boot the product

1. If you click the button "Restart", the product will be restarted.

2. After re-booting, please check the wireless LAN connection with the product.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

73
4. Trouble Guide
4.1 Check Point
If the product does not work properly, please check the following. If it still does not work, even if you
check the followings, please contact our support desk.

4.1.1 When the product and wireless LAN equipment are not connected
1. Check if the wireless LAN function of the product and the wireless LAN equipment are on
2. The wireless LAN device you are using might not support the authentication method (802.11
authentication) set to the product. In this case, change the authentication method of the wireless LAN
device you are using. For further details, please refer to the instruction manual of your wireless LAN
device.

3. If you chose WPA-PSK、WPA2-PSK、WPA/WPA2-PSK authentication mode, check if WPA pre-shared

key is correct.

4. If you chose Open or Shared authentication mode, check if WEP Key is correct
5. Check if Wireless LAN Automatic shut-off timer is on. Press power button to turn on wireless LAN
function.

4.1.2 In case you can't connect to the internet.

1. Please check if the product is within the service area.
2. The signal strength where you are using the product might not strong enough.
Try to move to the better signal area.
3. Please check if the network settings and profile settings are correct in Web UI.

4.1.3 In case the data connection is not available.

1. The signal strength where you are using the product might not strong enough.
Try to move to the better signal area.
2. Try to re-boot the product.

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

74
5. Appendix
5.1 Main Features

■ME-C30G
Model No ME-C30G
Dimension About 70.0mm(D) × 70.0mm(W) × 13.5mm(H)
Weight About 90g
Environmental Surface Temperature ： Max 48℃( 25℃, No contact Status)
Condition Operating Temperature Range ： 0～35℃
Operating Humidity Range ： 5～95% (Non-condensing
Storage Temperature ： -20～60℃
Storage Humidity ： 5 ～ 95% (Non-condensing)
Frequency LTE ： 800 / 900/1800 / 2100/ 2300/ 2500 MHz
W-CDMA ： 900 / 2100 MHz
GSM ： 900/ 1800 MHz
Data Speed LTE ：：Uplink (50Mbps) / Downlink (100Mbps)
HSDPA ： Downlink (14.4Mbps)
HSUPA ： Uplink (5.76Mbps)
W-CDMA ： Uplink (384Kbps) / Downlink (384Kbps)

GSM ： Uplink (471Kbps) / Downlink (471Kbps)

Wireless LAN ： IEEE802.11b (11Mbps)

IEEE802.11g (54Mbps)
IEEE802.11n (72Mbps)

Note : The maximum baud rate is different depending on the region and
communication systems available. Also, due to line congestion or communication
environment, the communication speed might decrease or it may be unable to
Max No of Clients communicate.
10 units (simultaneously) M
supports
Continuous Usage Time LTE： About 5.3h / 3G：About 7h / GSM:a About 9h
Standby Time About 300 hours (Wireless LAN off status)x
i
m
u
m

N
o

o
f

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

75 C
■Internal Battery
Voltage 3.8V
Visceral Battery Lithium-ion Polymer
Capacity 2000mAh

■AC Adapter
Input Voltage/Current AC100V ～ 240V ／ 0.5A
Output Voltage 5.0V
Size (W × H × D) About 59.5mm × 38.0mm × 48.0mm
Weight About 70g

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

76
5.2 ME-C30G Setting List

Initial Value/Setting Value Setting Value Initial Value

Introduction - -
Easy Setup - -
Basic Information - -
WAN Status - -
SIM Status - -
Signal Level - -
Battery Level - -
Network Name - -
Network (3G/LTE) - -
Phone Number - -
IMEI - -
IP Address - -
DNS Server - -
Connection Time - -
Wireless LAN Status - -
IP Address - -
MAC Address - -
Subnet Mask - -
SSID - -
SSID Stealth - -
Encryption Scheme - -
No of Wireless LAN Connection - -
Information of the connected equipment - -
Version Information - -
Software Version - -
Model Name - -

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

77
 Initial Value/Setting Value Setting Value Initial Value
Communication Setting - -
WAN - -
SIM Card Configuration - -
PIN Code Status - -
PIN Code Operation Enable Enable
Disable
Certify
Change
Current PIN Code Between 4-8 digits No
New PIN Code Between 4-8 digits No
Confirm new PIN Code Between 4-8 digits No
Unlock code (PUK Code) 8 digit numbers No
Remaining Digits to enter - 3
Network Setting - -
Network Setting Auto Auto
LTE only
3G only
2G only
Connection Setting - -
Profile List Up to 10 No
Profile Settings - -
Profile List - -
Profile Name Up to 50 alphanumeric Characters No
(Except " : ; // < > &)
Username Up to 63 Characters No
(Except " : ; // < > &)
Password Up to 63 Characters No
(Except " : ; // < > &)
APN Up to 100 Characters No
(Except " : ; // < > &)
Authentication Method PAP PAP
CHAP

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

78
 Initial Value/Setting Value Setting Value Initial Value
Wireless LAN - -
Basic Settings - -
SSID Up to 32 alphanumeric Characters, ※1
「-」、「_」
Channel Auto, 1～13 Auto
SSID Stealth Enable, Disable Disable
Wireless LAN Automatic Off- Disable、10, 30, 60 min Disable
timer
Security Settings - -
802.11 Setting No Encryption WPA2-PSK
Open Shared
WPA-PSK
WPA2-PSK
WPA/WPA2-PSK

WPA Encryption Scheme TKIP AES

AES TKIP+AES

WPA Pre-shared Key 8 to 63 alphanumeric characters ※1

Current WEP Key WEP Key 1～4 WEP Key 1

WEP Key 1 ～ 4 Enter 5 digit alphanumeric No
characters or 10 digit hexadecimal
numbers to set a 64 bit key or
enter 13 digit alphanumeric
characters or 26 digit hexadecimal
numbers to set a 128 bit key

DHCP Setting - -
IP Address 0.0.0.0 ～ 255.255.255.255 192.168.255.1
Subnet Mask 0.0.0.0 ～ 255.255.255.255 255.255.255.0
DHCP Server Enable, Disable Enable
Start IP Address 0.0.0.0 ～ 255.255.255.255 192.168.255.20
End IP Address 0.0.0.0 ～ 192.168.255.40
255.255.255.255
DHCP Lease Time (In seconds) 120 ～ 2147483647 43200
DNS Setting Auto, Manual Auto
Primary DNS 0.0.0.0 ～ 255.255.255.255 No
Secondary DNS 0.0.0.0 ～ 255.255.255.255 No
※1：For default setting, please refer to the seal on the back side of the product

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

79
 Initial Value/Setting Value Setting Value Initial Value
Firewall - -
MAC Address Filtering Configuration - -
MAC Address Filtering Mode Disable, Enable, Deny Disable
MAC Address 00:00:00:00:00:00 ～ No
FF:FF:FF:FF:FF:FF
IP Filtering Configuration - -
IP Address Filtering Enable, Disable Disable
Classification Allow, Deny Denial
Protocol TCP、UDP、ICMP TCP
WAN IP Address 0.0.0.0 ～ No
255.255.255.255
LAN Port Number 1 ～ 65535 No
Maximum Characters Up to 32 alphanumeric characters No
Setting List - -
NAT - -
Port Forwarding Setting - -
LAN IP Address 0.0.0.0 ～ No
255.255.255.255
LAN Port Number 1 ～ 65535 No
WAN Port Number 1 ～ 65535 No
Protocol TCP、UDP、ICMP TCP
Maximum Characters Up to 32 alphanumeric characters No
Setting List - -
DMZ Setting - -
DMZ Setting Enable, Disable Disable
DMZ IP Address 0.0.0.0 ～ 255.255.255.255 No

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

80
 Initial Value/Setting Value Setting Value Initial Value
System Settings - -
Change Password - -
Current Password Up to 15 alphanumeric characters No
New Password Up to 15 alphanumeric characters No
Confirm New Password Up to 15 alphanumeric characters No
Factory Settings - -
Factory Settings - -
Backup and Restore - -
Backup configuration - -
Restore configuration - -
Update - -
Select the updated file - -
Restart the product - -
Restart the product - -

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

81
5.3 Warranty and After Sales Service
■Warranty

The package you have purchased comes with a warranty card. Please check and read carefully if the warranty
card contains the description of the "dealers" and "date of purchase" and keep it in a safe place.

If the warranty card does not include the information of "dealers" and "date of purchase", keep the invoice or
receipt as an evidence and contact the "dealers" for clarification.

■Contact

MOBILEECO Terminal Software Support Center : +82-31-450-2873

Operating Hours : 9:00 ～ 17:00 (Weekdays only, Korean Local Time)

http://www.mobileeco.com/customer service/

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

82
5.4 Export Administration Regulations
To export or re-export the product and accessories may be subject to the Export Administration Regulations. If
you want to export and re-export the product and the accessories, please take steps that are required in the
customer's own risk and expense. Please contact the U.S. Department of Commerce or the Ministry of Economy,
Trade and Industry for the detailed procedure.

5.5 Intellectual Property Rights

※ Windows, Windows 8, Windows 7, Windows Vista, Windows XP, Internet Explorer are either registered
trademarks or the trademarks of Microsoft Corporation in the United States and other countries..
※ MAC OS is a trademark of Apple Inc., Which is registered in the U.S. and other countries.
※ iPad, iPhone, iPod touch are the trademarks of Apple Inc..
※ Android are the trademarks or registered trademarks of Google Inc..
※ WPA2 Wi-Fi, WPA and are the trademarks or registered trademarks of the Wi-Fi Alliance.
※ Product names are the trademarks of their respective owners, and company names listed.

· The contents of any part of this document is forbidden to be reproduced without permission

· The contents of this manual are subject to changed without any prior notice.

First Edition, March 2013

Issued by MOBILEECO Co., Ltd

Copyright © 2013 MOBILEEO CO., LTD, All rights reserved.

83