NXT® LEVEL
DS-504-0822
• Can be applied directly over concrete testing at RH of
100% or less per ASTM F2170
• Direct replacement for DRYTEK LEVELEX
Suitable Substrates
• Cement Backer Board
• Cement Mortar Bed
• Cement Terrazzo
• Ceramic Tile and Stone
• Concrete
1. PRODUCT NAME • Vinyl Tile
NXT® LEVEL • Exterior Glue Plywood (Interior Only)
• Gypsum Underlayments
2. MANUFACTURER
LATICRETE International, Inc. Packaging
1 LATICRETE Park North 50LB (22.7KG) BAG / 56 per pallet - Standard
Bethany, CT 06524-3423 USA Part: 0900-0050-21
Telephone: +1.203.393.0010, ext. 1235
Toll Free: 1.800.243.4788, ext. 1235 Approximate Coverage
Fax: +1.203.393.1684
Website: laticrete.com Nominal Thickness Approximate Coverage
1/8" (3 mm) 44.0 ft2 (4.1 m2)
3/16" (5 mm) 29.3 ft2 (2.7 m2)
3. PRODUCT DESCRIPTION
1/4" (6 mm) 22.0 ft2 (2.0 m2)
NXT Level is a cement-based underlayment for use in
leveling interior substrates. NXT Level produces a flat, 5/16" (8 mm) 17.6 ft2 (1.6 m2)
smooth and hard surface for the installation of finished 3/8' (10 mm) 14.7 ft2 (1.4 m2)
flooring. NXT Level can be placed from a 1/8" – 3" (3 – 76 7/16" (11 mm) 12.6 ft2 (1.2 m2)
mm) in a single lift. 1/2" (12 mm) 11.0 ft2 (1.0 m2)
9/16" (14 mm) 9.8 ft2 (0.9 m2)
Uses 5/8" (16 mm) 8.8 ft2 (0.8 m2)
• Commercial, retail (malls & shops) 11/16" (17mm) 8.0 ft2 (0.7 m2)
• Health care, hospitals 3/4" (19 mm) 7.3 ft2 (0.6 m2)
• Education (schools & universities) 13/16" (21mm) 6.8 ft2 (0.6 m2)
• Residential 7/8" (22 mm) 6.3 ft2 (0.6 m2)
• Hotels 15/16" (24 mm) 5.9 ft2 (0.5 m2)
1" (25 mm) 5.5 ft2 (0.5 m2)
Advantages 2" (51 mm) 2.7 ft2 (0.3 m2)
• Pourable and pumpable 3" (76mm) 1.9 ft2 (0.2 m2)
• High strength
• Deep application depth, no need for multiple Coverage will vary depending on the texture of the
placements surface. A survey is also recommended.
• Can be installed from a 1/8" to 3" and tapered to zero
at edges
• Can be applied over Gypsum based substrates Shelf Life
• Inorganic; will not contribute to mold/mildew growth Factory sealed containers of this product are guaranteed
• Suitable surface for most finished floor goods to be of first quality for one (1) year if stored off the
ground in a dry area.
F.7.3.12 - 0315 Data Sheets are subject to change without notice. For latest revision, visit laticrete.com.
DS-504-0822
Limitations
• Do not install NXT Level over particleboard,
chipboard, hardboard (Masonite®), Luan panels,
asbestos, gypsum-based patching materials, asphalt,
coal tar, or lightweight insulating concrete, or any
other dimensionally unstable materials.
• NXT Level is not recommended for steel-wheeled Physical Properties
traffic. Test Test Method
• For interior use only. Pour Depth 1/8" to 3" ( 3 – 76 mm)
• Do not install when surface temperature is below 40°F Consult Technical Services for
• (4°C) or above 90°F (32°C). Depths Over 3". Can be tapered
• Do not install over painted surfaces. to zero at edges.
• Do not exceed recommended mixing ratio as indicated Walkable 2 to 3 hours at 70°F (21°C)
in mixing instructions. Over watering will weaken Tensile Bond 275 - 305 psi (1.9 – 2.1 MPa)
product properties. Strength
• Never mix with cement or admixtures.
• Do not apply NXT Level over waterproofing or crack ASTM C-1583
isolation membranes. Flexural Strength 750 - 1000 psi (5.2 – 6.9 MPa)
• Adhesives/mastics, mortars and grouts for ceramic
tile, pavers, brick and stone are not replacements for ASTM C-1708
waterproofing membranes. When a waterproofing Compressive 1 day = 2700 psi (18.6 MPa)
membrane is required, use a LATICRETE® Strength 7 day = 4200 (28.9 MPa)
Waterproofing Membrane on top of the dry NXT Level. 28 day = 5000 psi (34.5 MPa)
• Not for use in submerged applications. ASTM C-1708
Set Time Initial @ 20 - 30 min.
Final @ 35 - 40 min.
Cautions ASTM C-1708
• Read and understand the Product Data Sheet and Installed Dry Weight 2.7 lbs/ft²
Safety Data Sheet. (per square foot @ ¼”
• Check www.laticrete.com for any technical bulletins or (6mm))
updated information about the product and its
application Flammability Flame Spread Index: 0
• Contact your local LATICRETE Technical Sales
Representative with any questions. ASTM E84-14 Smoke Developed Index: 0
• Consult SDS for more safety information.
• Protect finished work from traffic until fully cured. • All results are averages.
• Contains portland cement and silica sand. Causes
severe skin burns and eye damage. Wear protective
gloves, clothing and eye protection. In case of contact, Specifications subject to change without notification.
flush thoroughly with water. Results shown are typical but reflect test procedures
• Silica sand may cause cancer, respiratory irritation or used. Actual field performance will depend on installation
serious lung problems. Do not breathe dust. Wear a methods and site conditions.
respirator in dusty areas.
• Keep out of reach of children. 5. INSTALLATION
Surface Preparation
4. TECHNICAL DATA • Refer to TDS230 SUBSTRATE PREPARATION AND
PRIMER GUIDE for LATICRETE SELF-LEVELING
PRODUCTS for more detailed surface preparation
instructions.
Priming
• Refer to TDS230 SUBSTRATE PREPARATION AND
PRIMER GUIDE for LATICRETE SELF-LEVELING
PRODUCTS for more detailed dilution, approximate
coverage and application instructions. Use NXT
Primer, Prime-N-Bond, VAPOR BAN Primer ER or
General Primer (with sand broadcast) only.
F.7.3.12 - 0315 Data Sheets are subject to change without notice. For latest revision, visit laticrete.com.
DS-504-0822
Note: Keep primed surface clean. Do not allow any foot Surface to Receive Resilient Flooring, the self-
traffic onto the surface. leveling surface may require preparation including
cleaned of all loose material by scraping, sanding,
Mixing vacuuming, and primer application or a combination
NXT Level should be mixed with 4.0 – 4.5 quarts (3.8 – thereof.
4.3 L) of water per 50 lb (22.7 kg) bag. Do not over
water. For manual application, add product to water and • Conduct surface review including porosity tests,
mix for 2 – 3 min with a heavy duty drill (650 rpm) to surface temperature, bond testing (Mat Bond Test),
obtain a lump free mix. NXT Level can also be used in and other surface evaluation as required by flooring
most pump equipment. Please consult with a and adhesive manufacturer and in accordance with
LATICRETE representative to verify equipment the National Floor Covering Association (NFCA)
compatibility. A flow test should always be performed to Floor Covering Reference Manual. Also identify and
ensure that the mix is homogeneous and free from report any concerns for delaminated or loose areas,
separation. The ideal flow range for NXT Level is 10" to surface profile and surface flatness to project manager
12" (or 127mm to 152 mm) using the LATICRETE® Flow / General Contractor for additional surface prep,
Test Kit. See TDS 235N – NXT self-leveling correction, adjustment before starting installation of
underlayment Flow Test - for more detailed instructions floor covering materials.
on performing flow tests.
• Always test performance, suitability, and compatibility
Application of finished floor systems prior to their application.
Substrate temperature must be between 40 – 90°F (4 – Conduct bond testing in accordance with flooring and
32°C) during application and air temperature maintained adhesive manufacturer and ASTM F3311 - Mat Bond
between 50 – 90°F (10 – 32°C). Protect areas from Evaluation of Performance and Compatibility for
direct sunlight. Do not use damp curing methods or Resilient Flooring.
curing and sealing compounds. If required to meet level
tolerances, survey surface using a digital or electronic • In good drying conditions (ambient air temperature 65
leveling device and apply level pegs as required. – 75°F (18 - 24°C) / 40 – 60% RH) finished floor
covering may be installed 24 hours after installation of
Adequate ventilation should be provided to ensure NXT Level.
uniform drying. Pump or pour blended material onto
substrate at an average thickness ranging between 1/8" • Non-moisture sensitive tile and stone can be applied
– 3" (3 – 76 mm). Material can be tapered to zero at once self-leveling underlayment is walkable,
edges. approximately 2 to 3 hours.
Note: • Lower temperatures, higher RH, poor ventilation, and
• Wood substrates need a minimum thickness of 1/2" thicker self-leveling application will extend self-leveler
(12 mm) and diamond lath. Immediately following dry time.
placement lightly smooth the surface and pour
lines. When not using elevation pins, the use of a • NXT self-leveling products are not a vapor barrier and
gauge rake will assist in controlling material depth. will allow passage of moisture vapor. Prior to installing
• Do not expose LATICRETE self-leveling NXT self-leveling products, the concrete must be
underlayments to rolling dynamic loads, such as tested for moisture conditions. If the concrete moisture
forklifts or scissor lifts, for at least 72 hours after conditions exceed the floor covering manufacturer’s
installation at 70°F (21°C). Proper application is the requirements for the finished flooring a moisture
responsibility of the user. Field visits by LATICRETE mitigation epoxy must be applied before installing NXT
personnel are for the purpose of making technical self-leveling. Use VAPOR BAN E, VAPOR BAN ER or
recommendations only and not for supervising or VAPOR BAN Primer ER prior installing NXT self-
providing quality control on the jobsite. leveling products.
Application tools offered by LATICRETE:
• 7316-LVPG-25 / LATICRETE Elevation Pins
• 7317-NIVC-HS / LATICRETE Electronic Survey Tool
6. AVAILABILITY AND COST
• 7319-TOOL-CR / Self-Leveling Underlayment &
Availability
Overlayment Tool Kit
LATICRETE materials are available worldwide.
Flooring Installation
For Distributor Information, Call:
(Bold References are Hyperlinks)
Toll Free: 1.800.243.4788
• Immediately before installation of flooring, as Telephone: +1.203.393.0010
recommended by flooring and adhesive manufacturer For on-line distributor information, visit LATICRETE at
and in accordance ASTM F2783 - Installation of laticrete.com
Self-Leveling Underlayment & Preparation of
F.7.3.12 - 0315 Data Sheets are subject to change without notice. For latest revision, visit laticrete.com.
DS-504-0822
• DS-307 PRIME N BOND
Cost
Contact a LATICRETE Distributor in your area.
7. WARRANTY
See 10. FILING SYSTEM:
• DS 230.05: 5 Year System Warranty (US - English)
• DS 230.10: 10 Year System Warranty (US - English)
• DS 230.13: 1 Year Product Warranty (US - English)
• DS23010CR: Concrete Remediation_10 Year System
Warranty (United States)
• DS23010CN CR: Concrete Remediation 10 Year
System Warranty (Canada - English)
• DS230 10F CR: Concrete Remediation 10 Year
System Warranty (Canada - Français)
• DS230 10SP CR: Concrete Remediation 10 Year
System Warranty (Estados Unidos - Español)
8. MAINTENANCE
Non-finish LATICRETE and LATAPOXY installation
materials require no maintenance but installation
performance and durability may depend on properly
maintaining products supplied by other manufacturers.
9. TECHNICAL SERVICES
Technical Assistance
Information is available by calling the LATICRETE
Technical Service Hotline:
Toll Free: 1.800.243.4788, ext. 1235
Telephone: +1.203.393.0010, ext. 1235
Fax: +1.203.393.1948
Technical and Safety Literature
To acquire technical and safety literature, please visit our
website at laticrete.com.
10. FILING SYSTEM
Additional product information is available on our
website at laticrete.com. The following is a list of related
documents:
• DS 230.05: LATICRETE 5 Year System / Warranty
(United States and Canada)
• DS 230.10: LATICRETE 10 Year System / Warranty
(United States and Canada)
• TDS 230: SUBSTRATE PREPARATION AND
PRIMER GUIDE for LATICRETE SELF-LEVELING
PRODUCTS
• TDS 235N: NXT Self-Leveling Underlayment Flow
Test
• DS 502.0: NXT® Primer
• DS-622.6-0822 General Primer
• DS-36647 VAPOR BAN E
• DS-35216 VAPOR BAN ER
• DS-35222 VAPOR BAN PRIMER ER
______________________________________________________________________________________________
© 2022 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners.
F.7.3.12 - 0315 Data Sheets are subject to change without notice. For latest revision, visit laticrete.com.
DS-504-0822
