DETAILED ESTIMATE OF PROPOSED DEVELOPMENT & BEAUTIFICATION OF
KUNDESHWAR DHAM, AT-MANJHILGAON, DISTT. - FATEHPUR (U.P.)
FORM "J"
( RS. IN LAC)
1 TOTAL COST OF PROJEC : Rs. 57.42
2 LESS 5% DUE TO DEPTT : Rs. 2.87
TOTAL : Rs. 54.55
3 ADD 10.0% CENTAGE : Rs. 5.46
TOTAL : Rs. 60.01
4 ADD 1% LABOUR CESS : Rs. 0.55
5 ADD 18.0% G.S.T. : Rs. 9.82
GRAND TOTAL : Rs. 70.38
SAY RS. 70.38 LACS.
DETAILED ESTIMATE OF PROPOSED DEVELOPMENT & BEAUTIFICATION OF
KUNDESHWAR DHAM, AT-MANJHILGAON, DISTT. - FATEHPUR (U.P.)
SUMMARY OF COST
S.N. DESCRIPTION OF ITEM QTY. UNIT RATE AMOUNT
(IN LACS)
1 COST OF DWF WITH SUBMERSIBLE IN OLD HAND PUMP 1.00 NOS 10.05 10.05
2 COST OF DWAR (4.5 MT. WIDE) 1.00 NOS 864769.52 8.65
4 COST OF SIGNAGE 1.00 NOS 103779.81 1.04
5 COST OF YATRI SHED 1.00 NOS 1795734.14 17.96
6 COST OF TOILET 1.00 NOS 1784712.08 17.85
8 COST OF STONE CARVED BENCH 4.00 NOS 18890.00 0.76
(As per Quotation attached)
G. TOTAL 'A' 56.30
10 ADD FOR 2% CONTIGENCIES CHARGES 1.13
TOTALSAY RS. 57.42 LAC
BILL OF QUANTITY OF OF PROPOSED DWF
AT :- , DISTRICT :-FATEHPUR (U.P.)
ABSTRACT OF COST
(Based on U.P.P.W.D. S.O.R. for District: Prayagraj w.e.f. 01.05.2022/ & DSR-2021)
S.N. DESCRIPTION OF ITEM SCH. NO. QUANTITY UNIT RATES RATES AMOUNT
[SCHEDULED]
1 Excavation in foundation in ordinary soil (loam clay or
sand) including lift upto 1.50 meter and lead upto 30
meter and including filling, watering and ramming of
excavated earth into the trenches or into the space
between the building and sides of foundation trenches
or into the plinth and removal and disposal of sur-plus
earth as directed by the Engineer incharge up to a
distance of 30 meters from the foundation trenches.
PWD-251 11.684 CUM 160.00 1869.48
2 Filling of carted earth. AR-I 0.000 CUM 436.00 0.00
3 Providing and laying in position cement concrete of
specified gradeexcluding the cost of centering and
shuttering - All work up to plinthlevel :1:4:8 (1 Cement :
4 coarse sand : 8 graded stone aggregate 40mm nominal
size)
PWD-281 3.126 CUM 5800.00 18132.25
4 Sand filling in plinth including supply of necessary
quantity of sand from a distance not exceeding 8 kms.
from the site of work and including watering, dressing
etc rate to include cost of all materials labour T & P etc
required for proper completion of work.
PWD-255+Labour 1.350 CUM 780.00 1053.00
5 Providing and injecting chemical emulsion for
preconstructional antitermite treatment and creating a
chemical barrier under and alround the coloumn
pitswall tench basement excavation top surface if plinth
filling junction of wall and floor along the external
perimer of binding expansion joints,surrounding of
pipes and conduits [Link](plinth area of the
building at ground floor only shall be measured as per
I.S.6313 (Part 11 1981) aldrine emulsifiable concrete or
any other approved material such as hepthachlor or
chlordance will be used. The rate of application of
chemical emulsion shall be as follows:- (1) treatment for
masonary & foundation 5 litres per sq.m. (2) back fill in
immediate contract with foundation 7.5 litre per sqm (3)
treatment of top surface of plinth filling 5 liters per
sq.m. (4) treatment of soil along external parameter of
building 7.50 lire per sq.m
PWD-CH-08 9.000 SQM 210.00 1890.00
6 R.C.C. work with cement approved coarse sand and 2
cm. guage approved stone grit in the proportion of
1:1.5:3 in lintels of doors and windows excluding supply
of reinforcement and its fixing and binding the same
with 24 BWG binding wire and including necessary
centering and shuttering [Link] also including supply of
all materials, labour and tools and plants etc, required
for proper completion of the works. including cost of
binding wire. The rate excludes making of drip course
which shall be paid extra.
PWD-283+2.06*280.00
(a) Ground Floor 0.000 CUM 9076.80 0.00
7 As in item no. 6 above but for slabs (Using 1:1.5:3 Mix
concrete)
PWD-284
(a) Ground Floor 2.033 CUM 8650.00 17582.86
8 As in item 6 but for the lighter beams i.e. having spans
upto 6 m. (Using 1:1.5:3 Mix concrete)
PWD-285
(a) Ground Floor 1.932 CUM 9200.00 17774.40
9 As in item 6 above but in R.C.C. Raft foundation and
footing with approved stone ballast.(Using 1:1.5:3 Mix
concrete)
PWD-287a 8.043 CUM 7800.00 62738.33
9a. Boring with hydraulic piling rigs with power units,
providing and installing cast in situ single under reamed
piles of specified diameter and length below pile cap in
M-25 cement concrete, to carry a safe working load not
less than specified, excluding the cost of steel
reinforcement but including the cost of boring with
bentonite solution and the length of the pile to be
embedded in pile cap etc. all complete.
(Length of pile for payment shall be measured upto to
the bottom of pile cap) :300mm
D.S.R.-20.3.1 72.000 RM 2560.90 2137.07 153869.12
10 As in item 6 above but in R.C.C. columns in 1:1.5:3
having strength not less than M-20.
(PWD-289)
(a) Ground Floor 0.900 CUM 9800.00 8820.00
11 First Class brick work in 1:6 cement and coarse sand of
1.25 F.M. mortar in foundation and plinth including
supply of all materials, labour, tools and plants etc.
required for proper completion of the work. (1:6
cement & coarse sand)
PWD-303+305a-305 0.000 CUM 5193.00 0.00
12 Providing & applying a coat of residual petroleum
bitumen of grade of VG-10 of approved quality using
1.7kg per square metre on damp proofcourse after
cleaning the surface with brushes and finally with
apieceof cloth lightly soaked in kerosene oil.
D.S.R.-4.13 5.290 SQM 113.85 95.01 502.59
13 Same as in item No. 11 above but in super-structure
above plinth level up to floor two level ( up to two
storeys ) including necessary cutting and moulding of
brick work as required and also including
honeycombed brick work in thickness of wall more than
12cms. (1:4 cement : coarse sand)
PWD-303+305a-
305+309+310
(a) Ground Floor 8.549 CUM 5834.00 49875.45
14 P/F Mild steel or iron in plain work such as reinforced
concrete or reinforced, brick work (when not included in
over all rates ) wrought to required shape as necessary
including bending for proper completion of the work
and including supply of steel its wastage bend hooks
and authorised over lapping shall be measured upto
floor two level.
(D.S.R.-5.22.6)
(a) Ground Floor 25.929 QTL 8965.00 232454.20
15 15 mm thick plinth plaster [1 cement : 4 coarse sand]
D.S.R.-13.5.1 1.800 SQM 354.50 295.83 532.49
16 12 mm cement plaster in single coat on rough side of
single or half brick wall for interior plastering up to floor
two level including internal rounded angles not
exceeding 80 mm in girth and finshed even and smooth.
(1) 1 cement : 6 coarse sand
PWD-13.12D+
(.015*250)+13.13E
(a) Ground Floor 26.370 SQM 180.75 4766.38
17 Providing and fixing 18 mm thick gang saw cut, mirror
polished,premoulded and prepolished, machine cut for
kitchen platforms, vanitycounters, window sills , facias
and similar locations of required size,
approved shade, colour and texture laid over 20 mm
thick base cementmortar 1:4 (1 cement : 4 coarse sand),
joints treated with white cement,mixed with matching
pigment, epoxy touch ups, including rubbing,
curing,moulding and polishing to edges to give high
gloss finish etc. complete at all [Link] of slab over
0.50 sqm
D.S.R. -[Link]
(a) Ground Floor 6.810 SQM 4425.35 3692.95 25149.02
18 Supply and fixing 6 mm China white glazed tiles in
flooring or in skirting or dado laid with 1:3 cement and
approved coarse sand mortar finished with white
cement slurry jointing and polishing complete including
supply of all materials, labour and tool sand plants etc.
required for proper completion of the work. (Size of tiles
upto 300x300mm).
(a) Ground Floor PWD-628 9.000 SQM 1196.00 10764.00
19 Supply and fixing 6 mm China white glazed tiles in
flooring or in skirting or dado laid with 1:3 cement and
approved coarse sand mortar finished with white
cement slurry jointing and polishing complete including
supply of all materials, labour and tool sand plants etc.
required for proper completion of the work. (Size of tiles
upto 300x300mm).
(a) Ground Floor PWD-628 1.800 SQM 1196.00 2152.80
20 Supply and fixing 6 mm China white glazed tiles in
flooring or in skirting or dado laid with 1:3 cement and
approved coarse sand mortar finished with white
cement slurry jointing and polishing complete including
supply of all materials, labour and tool sand plants etc.
required for proper completion of the work. (Size of tiles
upto 300x300mm).
PWD-628
(a) Ground Floor 22.680 SQM 1196.00 27125.28
21 Cement concrete flooring [Link] (1 cement :2 coarse
sand :4 graded stone aggregate 12-20mm nominal size
laid in one layer neat cement (25 mm thick floor).
PWD-601 A 14.040 SQM 293.00 4113.72
22 Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st class
hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face
veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt
hinges with necessary screws
D.S.R.-9.21.1 2.520 SQM 2392.65 1996.67 5031.60
Extra for Providing and fixing flush doors with
decorative veneering instead of non decorative ISI
marked flush door shutters conforming to IS: 2202. both
side aminated.
D.S.R.-9.22.1*2 2.520 SQM 956.00 797.78 2010.41
23 M.S. or Iron work of small sizes and sections such as
holding down bolts, hold fast tie rods, gratings etc.
wrought to required from including supply of steel bolts,
nuts wastage etc and fixing required for proper
completion of the work.
(a) Providing & fixing of hold fast for chaukhats of doors
and windows.
PWD-AR 8.400 KG 88.06 739.69
(b) Providing & fixing of door / windows grill. PWD-AR 16.200 KG 88.06 1426.55
(c) Z-Section steel windows PWD-AR 27.000 KG 88.06 2377.58
(d) Angle iron door chaukhats 40*40*5 PWD-AR 16.200 KG 88.06 1426.55
24 Distempering (Two coat) with oil bound distemper of
approved brand and manufacture & of required shade
on undecorated wall surface to give an even shade over
& including a priming coat with cement primer of
approved brand & manufacture such as Berger,J&N,
Shalimar, Asian paints after thoroughly brushing the
surface free from mortar droppings & other foreign
matters & also including preparing the surface even with
plaster of paris or approved synthetic material & sand
papered smooth including cost ofall materials. (For
Internal wall surface)
( PWD 649+651)
(a) Ground Floor 9.000 SQM 103.00 927.00
25 Providing and fixing 150 mm bright finished floor brass
door stopper with rubber cushion, necessary brass
screws etc. to suit shutter thickness complete.
(DSR- 14.34) 1.000 NOS. 233.10 194.52 194.52
26 Providing & fixing Stainless steel sliding door bolts ISI
marked anodised (anodic coating not less than grade AC
10 as per IS : 1868) transparent or dyed to required
colour or shade with nuts and screws etc complete. (a)
250mm x 16mm .
(M.R.) 1.000 NOS 500.00 500.00
27 Providing and fixing stainless steel towerbolts (barrel
type) with necessary screws etc. complete
(a) 250 mm x 10mm (M.R.) 1.000 NOS 400.00 400.00
28 Providing and fixing stainless steel handles with screws
etc. complete (a) 125 mm
(M.R.) 2.000 NOS 200.00 400.00
29 Providing & laying "brick Coba" 12mm thick laid with M-
150 class brick bat coba 7.50 cm thick with gap of 15mm
to each other, over 20mm thick base of cement mortar
1:4 cement and coarse sand mixed with water proofing
compound spreading cement slurry mixed with acrylic
cement concrete water proofing compound filled gaps
of
coba & top of coba mortar mixed with water proofing
compound in 1:4 cement and coarse sand mortar
finished smooth & top mashed false square 30 cm x 30
cm and side wall parapet shall be mono lythic plaster
wall upto 30cm higher and junction and corner shall be
rounded by brick
ballast cement and coarse sand masonry coba with top
finished plaster mixed with acetic water proofing
compound @ 2% by weight & including S/o all material,
labour T & P etc complete for proper completion of
work.
D.S.R.-22.7.1
11.972 SQM 1522.95 1270.90 15214.73
30 Painting two coat over priming coat (but including cost
of priming coat) on steel and other metal surfaces up to
10 cm. width or girth or small articles not exceeding
0.10sqm in area white superior synthetic enamel such
as LUXOL3,Hi-gloss apcolite superlac, DULUX specified
brushing to give an even shade and including cleaning
the surface of all dirt,dust and other foreign matter sand
papering and stoping including cost of all materials,
labour tools and plants etc. required for proper
completion of the work.
PWD-641+642 2.592 SQM 102.00 264.38
31 Same as item 31 above but on new wood surface. PWD-641+642 5.040 SQM 102.00 514.08
32 Providing & fixing glass panes with putty and glazing
clips in steel doors, windows, clerestory windows, all
complete with : 3.8-4.7 mm thick glass panes
(DSR-10.30.1 1.080 SQM 940.30 784.68 847.45
33 Construction of drain alongwith apron. AR-II 17.440 RM 1469.51 25628.29
34 Stone work (machine cut edges) for wall lining etc.
(veneer work) upto 10 metre height, backing filled with
a grout of average 12 mm thick cement mortar 1:3 (1
cement : 3 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment matching the stone shade : (To
be secured to the backing and the sides by means of
cramps and pins which shall be paid for
separately) :Stone work (machine cut edges) for wall
lining etc. (veneer work) upto 10 metre height, backing
filled with a grout of average 12 mm thick cement
mortar 1:3 (1 cement : 3 coarse sand) including pointing
in white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the stone
shade : (To be secured to the backing and the sides by
means of cramps and pins which shall be paid for
separately) :Red sand stone - exposed face fine dressed
with rough backing.30 mm thick
D.S.R.-[Link] 20.220 SQM 4229.85 3529.81 71372.75
34a. Providing and fixing stainless steel cramps of required
size and shape for anchoring stone wall lining to the
backing or securing adjacent stones in stone wall lining
in cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases in stone and
holes in walls wherever required.
D.S.R.-8.15*0.8345 20.220 KG 624.95 521.52 10545.15
34b. Providing and fixing copper pins 7.5 cm long 6 mm
diameter for securing adjacent stones in stone wall
lining in cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases.
D.S.R.-8.16*0.8345 81.000 NOS. 37.60 31.38 2541.55
35 Cost of carving work (Quotation Attached) MR 3.600 SQM 12418.00 44704.80
36 Cost of fitting and plumbing work (As per detailed attached) 76269.00
37 Cost of istallation of Submersible in existing Hand Pump
(As per detailed attached) 6616.50
38 Cost of electrical work (As per detailed attached) 23992.00
39 Cost of R.O. Machine system water cooler (Quotation Attached) 70000.00
TOTAL 1003240.47
G. TOTAL 1003240.47
Say Rs. 10.05 Lacs.
DETAILED MEASUREMENTS OF PROPOSED DWF
AT :- , DISTRICT :-FATEHPUR (U.P.)
DETAILES OF MEASUREMENT
[Link]. DESCRIPTION OF ITEM NO. L B H QTY UNIT
1 Earth work in excavation
UNDER FOOTING
GP1 (4P1) 4 1.775 1.775 0.900 11.342
TIE BEAM
TB1 4 3.000 0.380 0.075 0.342
TOTAL 11.684 CUM
2 Filling of carted earth
AVAILABLE EARTH 30% OF ITEM NO. 1 -3.505
UNDER FLOOR
DWF 1 3.000 3.000 0.375 3.375
TOTAL 0.000 CUM
3 Base concrete ([Link])
UNDER FOOTING
GP1 (4P1) 4 1.625 1.625 0.100 1.056
TIE BEAM
TB1 4 3.000 0.380 0.075 0.342
UNDER FLOOR
DWF 1 3.000 3.000 0.075 0.675
UNDER APRON
2 3.900 0.900 0.075 0.527
2 3.900 0.900 0.075 0.527
TOTAL 3.126 CUM
4 Sand filling under floor
UNDER FLOOR
DWF 1 3.000 3.000 0.150 1.350
TOTAL 1.350 CUM
5 Anti-termite treatment 1 9.000
TOTAL 9.000 SQM
6 R.C.C. work in Lintel
(a) Ground Floor
TOTAL 0.000 CUM
7 R.C.C. work in slab
(a) Ground Floor
SLAB
DWF 1 3.460 3.460 0.125 1.496
3 2.500 0.715 0.100 0.536
TOTAL 2.033 CUM
8 R.C.C. work in beams
(a) Ground Floor
TIE BEAM
TB1 2 3.000 0.230 0.350 0.483
2 3.000 0.230 0.350 0.483
BEAM
B1 2 3.000 0.230 0.350 0.483
2 3.000 0.230 0.350 0.483
TOTAL 1.932 CUM
9 R.C.C. work in Raft foundation
GP1 (4P1) 4 1.625 1.625 0.750 7.922
4 0.450 0.450 0.150 0.122
TOTAL 8.043 CUM
9a. Pile work
16 4.500 72.000 RM
16*0.25*3.14*0.300*0.300*4.50 5.087 CUM
10 [Link] in Column
(a) Ground Floor
UP TO PLINTH LEVEL
C1 4 0.300 0.300 2.500 0.900
TOTAL 0.900 CUM
11 B/W In foundation
TOTAL 0.000 CUM
12 D.P.C.
DWF 4 3.000 0.230 2.760
4 3.000 0.230 2.760
TOTAL 5.520 SQM
DEDUCTION (-)
D1 1 1.000 0.230 0.230
TOTAL 0.230 SQM
TOTAL 5.290 SQM
13 B/W In Superstructure (230mm)
(a) GROUND FLOOR
DWF 4 3.000 0.230 2.500 6.900
4 3.000 0.230 0.900 2.484
TOTAL 9.384 CUM
DEDUCTION (-)
D1 1 1.000 0.230 2.550 0.587
W1 2 0.450 0.230 1.200 0.248
TOTAL 0.835 CUM
TOTAL 8.549 CUM
14 M. S. work in R.C.C.
(a) Ground Floor
qty same as item no (6a)*1.50*0.785 (Lintel) 0.000
qty same as item no (7a)*1.00*0.785 (Slab) 1.596
qty same as item no (8a)*2.50*0.785 (Beam) 3.412
qty same as item no (9)*1.25*0.785 (Footing) 7.893
qty same as item no (9a)*2.67*0.785 (Pile) 10.662
qty same as item no (10a)*3.35*0.785 (Column) 2.367
TOTAL 25.929 QTL
15 15 mm plinth plaster
Inner
DWF 1 12.000 0.150 1.800
TOTAL 1.800 SQM
16 12mm cement plaster (Interior surface)
(a) Ground Floor
DWF 1 12.000 2.500 30.000
TOTAL 30.000 SQM
DEDUCTION (-)
D1 1 1.000 2.550 2.550
W1 2 0.450 1.200 1.080
TOTAL 3.630 SQM
NET TOTAL 26.370 SQM
17 Granite flooring
(a) GROUND FLOOR
PLATEFORM
3 2.400 0.600 4.320
STEP 3 1.660 0.300 1.494
4 1.660 0.150 0.996
TOTAL 6.810 SQM
18 Vitrified tiles flooring
(a) Ground Floor
DWF 1 3.000 3.000 9.000
TOTAL 9.000 SQM
19 Vitrified tiles in skirting
(a) Ground Floor
DWF 1 12.000 0.150 1.800
TOTAL 1.800 SQM
20 Ceremic wall tiles
(a) Ground Floor
WALL TILES
DWF 1 12.000 2.100 25.200
TOTAL 25.200 SQM
DEDUCTION (-)
D 1 1.200 2.100 2.520
TOTAL 2.520 SQM
TOTAL 22.680 SQM
21 25 mm thick C.C. Flooring
APRON 2 3.900 0.900 7.020
2 3.900 0.900 7.020
TOTAL 14.040 SQM
22 35mm thick Flush doors
a. SINGLE LEAF
D1 1 1.200 2.100 2.520
TOTAL 2.520 SQM
23 [Link] in D/W
(a) Hold fast
DOORS 1 6.000 0.600 3.600
WINDOWS 2 4.000 0.600 4.800
VENTILATORS 0 2.000 0.600 0.000
TOTAL 8.400 KG
(b) [Link]
W1 2 0.450 1.200 15.000 16.200
TOTAL 16.200 KG.
(c) Z-Section Windows (For Z-SECTION & wire mesh)
W1 2 0.450 1.200 25.000 27.000
TOTAL 27.000 KG.
(d) Angle Iron door Chaukhats (40X40X5 mm)
D1 1 5.400 3.000 16.200
TOTAL 16.200 KG
24 Oil bound distemper
Ceiling
DWF 1 3.000 3.000 9.000
TOTAL 9.000 SQM
25 Door Stopper TOTAL 1.000 NOS.
26 Sliding bolt.
250 x 16mm TOTAL 1.000 NOS
27 Tower bolt
(a) 250 x 10mm TOTAL 1.000 NOS
28 Handle (125mm)
(a) 125mm TOTAL 2.000 NOS
29 Brick coba treatment
G.F. TERRACE 1 3.460 3.460 11.972
TOTAL 11.972 SQM
30 Steel painting
GRILLS
W1 2 0.450 1.200 1.000 1.080
DOOR CHAUKHATS
D 1 1.200 2.100 0.600 1.512
TOTAL 2.592 SQM
31 Painting on wood
FLUSH DOORS
D 1 1.200 2.100 2.000 5.040
TOTAL 5.040 SQM
32 Glass panes
W1 2 0.450 1.200 1.080
TOTAL 1.080 SQM
33 Making of Drain along Apron
APRON 2 4.360 8.720
2 4.360 8.720
TOTAL 17.440 RM
34 Red sand stone cladding
2 1.290 2.500 6.450
2 1.350 2.500 6.750
1 7.800 0.900 7.020
TOTAL 20.220 SQM
34a. Stainless steel Cramp
1 20.220 4.000 0.250 20.220 KG
34b. Copper Pin
1 20.220 4.000 80.880
81.000 NOS.
35 Carving work 4 3.000 0.300 3.600 SQM
BILL OF QUANTITY OF OF INSTALLATION OF SUBMIRSIBLE KEEPING OLD HAND PUMP FUNCTIONAL
DISTT- FATEHPUR
ABSTRACT OF COST
(Based on U.P.P.W.D. S.O.R. for District: Prayagraj w.e.f. 01.05.2022/ & DSR-2023)
S.N. DESCRIPTION OF ITEM Ref. NO. QUANTITY UNIT RATES AMOUNT
[SCHEDULED]
1 Providing and fixing attachment for joining
Submersible pump and hand Pump Cylinder
including carriage, all T&P and Labour charges
MR 1.000 Job 1000.00 1000.00
2 Repairing of old Hand Pump cylinder by re-
threading both ends and replacing washers 100% of
including all T&P and Labour charges total
qty.@Rs.
600 1.000 Job 600.00 600.00
3 Repairing of old connecting rod by straightening,
cutting & threading including all T&P and Labour 40% of
charges total
[email protected] 00 1.000 Job 160.00 160.00
4 Supplying and fixing new connecting rod for
hand pump 3mtr. Length duly socketed and
threated (Supposing 10 Nos. connecting rods in
pipes lowering) including carriage at site.
MR 4.000 Per Piece 400.00 1600.00
5 Providing and fixing new Hand Pump head
pressure plate with brass bush, rubber seal, nut
& bolts and chain etc. including all T&P and
Labour charges
MR 1.000 Job 1800.00 1800.00
6 Providing and fixing of 11/2 *1 inch G.I. reducer
in Hand Pump outlet including cutting welding at
site and making arrangement for lowering cable
and wire rope in pedestal of india mark II Hand
pump.
100% 1.000 Job 956.50 956.50
7 Labour charges for lowering of hand pump
assembly with submersible pump in existing
bore hole including jointing connecting rod, G.I.
Pipes etc., all required T&P and Labour charges
MR 1.000 Job 500.00 500.00
Total 6616.50
SCHEDULE OF QUANTITIES FOR PLUMBING WORKS
PROJECT
FOR DWF AT DISTRICT - FATEHPUR (U.P.)
(SCHEDULED ITEMS AS PER D.S.R. 2021)
S.N. Description D.S.R. No.(21) Qty. Unit Rate (Rs.) Rate (Rs.) Amount (Rs.)
SANITARY FIXTURES & ACCESSORIES : I x0.8345
1 Providing and fixing water closet squatting pan (Indian type
W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre
low level white P.V.C. flushing cistern, including flush pipe,
with manually controlled device (handle lever) conforming to
IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever
required
a) White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests 17.1.1 0 Nos. 5781.35 4824.54 0.00
b) Same as above but for European type W.C. pan with white
plastic seat and lid. 17.2.1 0 Nos. 5540.55 4623.59 0.00
2 Providing and fixing wash basin with C.I. brackets, 15 mm
C.P. brass pillar taps, 32 mm C.P. brass waste of standard
pattern, including painting of fittings and brackets, cutting
and making good the walls wherever require
a) White Vitreous China Flat back wash basin size 550x 400
mm with single 15 mm C.P. brass pillar tappillar tap.
17.7.4 12 Nos. 2731.45 2279.40 27352.74
3 Providing and fixing flexible P.V.C. waste pipe for sink or
wash basin including PVC waste fittings complete.
Semi rigid pipe 17.28.1
a) 32mm dia [Link] 12 Nos. 90.95 75.90 910.77
b) 40mm dia [Link] 0 Nos. 101.65 84.83 0.00
4 Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm
thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete.
17.31 0 No. 1411.15 1177.60 0.00
5 Providing and fixing white vitreous china flat back or wall
corner type lipped front urinal basin of 430x260x350mm and
340x410x265mm sizes respectively with automatic flushing
cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I. clamps complete, including painting of
fittings and brackets, cutting and making good the walls and
floors wherever required:
a) Range of three urinal basins with 10 litre white P.V.C.
automatic flushing cistern Parryware/ Hindware Seabird/
Orient (Coral) 17.4.3 0 Each 11256.40 9393.47 0.00
b) Range of two urinal basins with 5.0 litre white P.V.C.
automatic flushing cistern Parryware/ Hindware Seabird/
Orient (Coral) 17.4.2 0 Each 8115.55 6772.43 0.00
c) One urinal basin with 5.0 litre white P.V.C. automatic
flushing cistern Parryware/ Hindware Seabird/ Orient (Coral)
17.4.1 0 Each 5268.85 4396.86 0.00
6 Providing and fixing stone slab table rubbed, edges rounded
and polished of size 75x50cm deep and 1.8cm thick fixed in
Urinal partitions by cutting a chase of appropriate width with
chase cutter and embedding the stone in the chase with epoxy
grout or with cement concrete [Link] (1cement: 2coarse sand:
4graded stone aggregate 6mm nominal size) as per direction
of Engineer-in-charge and finished smooth.
8.10
Granite Stone of approved shade 8.10.2 3.00 Sqm. 3542.85 2956.51 8869.52
7 Providing & fixing PTMT towl rail complete with brackets
fixed to wooden cleats with cp brass screws with concealed
fitting arrangement of approved quality and colour. 600 mm.
long towl rail length of 645 mm. width 78 mm. and effective
height of 88 mm, weighing not less than 190 gms.
17.73.2 0 Each 600.35 500.99 0.00
8 Providing and fixing PTMT Liquid soap container 109 mm 17.71 0 Each 146.30 122.09 0.00
wide ,125 mm high and 112 mm distance from wall of
standerd shape with bracket of the same material with snap
TOTAL(SCHEDULE ITEMS) 37133.04
TOTAL( NON SCHEDULE ITEMS) 0.00
TOTAL( SCHEDULE+NON SCHEDULE ITEMS) Rs. 37133.04
SOIL WASTE & VENT PIPES AND FITTINGS - II
1 Providing & fixing soil, waste and vent pipes.
a) 100mm dia centrifugally cast iron S & S pipe. [Link] 0 Rm. 1077.40 899.09 0.00
b) 75mm dia centrifugally cast iron S & S pipe. [Link] 5 Rm. 1042.10 869.63 4348.16
2 Providing lead caulked joints to sand cast iron/centrifugally
cast (spun) iron pipes & fitting of diameters.
a) 100mm 17.58.1 0 No. 549.65 458.68 0.00
b) 75mm 17.58.2 0 No. 466.40 389.21 0.00
3 Providing & fixing M.S. holder bat clamps of approved
design to sand cast iron/centrifugally cast (Spun) iron S & S
pipe embeded in & including cement concrete blocks
10x10x10cm. of [Link] mix (1 cement : 2 coarse : 4 graded
stone aggregate 20mm nominal
size). Including cost of cutting holes & making good the
walls etc.
a) for 100mm dia pipe. 17.37.1 0 No. 308.45 257.40 0.00
b) for 75mm dia pipe. 17.37.2 5 No. 304.45 254.06 1270.32
4 Providing & fixing cast iron trap of self cleansing design with
or without ventarm complete, including cost of cutting &
making good the walls & floors.
a) 100mm inlet & 75mm outlet. [Link] 0 No. 1671.00 1394.45 0.00
5 Providing & fixing cast iron coller.
a) 100mm dia. [Link] 0 No. 439.75 366.97 0.00
b) 75mm dia. [Link] 2 No. 271.45 226.53 453.05
6 Providing and fixing plain cast iron S & S sanitary bend.
a) 100mm [Link] 0 Nos. 439.75 366.97 0.00
b) 75mm [Link] 2 Nos. 298.20 248.85 497.70
7 Providing and fixing centrifugaly cast iron single equal plain
junction of required degree.
a) 100x100x100mm [Link] 0 Nos. 707.30 590.24 0.00
b) 75x75x75mm [Link] 2 Nos. 498.90 416.33 832.66
8 Providing and fixing on wall face unplasticised Rigid PVC
rain water pipes conforming to IS : 13592 Type A including
jointing with seal ring conforming to IS : 5382 leaving 10
mm gap for thermal expansion . (i) Single socketed pipes.
a) 110mm diameter 12.41.2 4 Mtr 319.75 266.83 1067.33
9 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete [Link] (1 cement : 2 coarse sand : 4
graded stone aggregate of 20 mm nominal size) over PVC
sheet 1m x 1 m x 400 micron, finished with 12 mm cement
plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat
cement,punning,rounding the edges and making and finishing
the outlet complete.
a) 110mm 12.22 1 Nos. 266.60 222.48 222.48
10 Providing and fixing unplasticised -PVC pipe clips of
approved design to unplasticised - PVC rain water pipes by
means of 50x50x50mm hard wood plugs, screwed with M.S.
screws of required length including cutting brick work and
fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and
making good the wall etc. complete.
a) 110mm 12.43.2 4 Nos. 309.50 258.28 1033.11
TOTAL(SCHEDULE ITEMS) 9724.80
TOTAL( NON SCHEDULE ITEMS) 0.00
TOTAL( SCHEDULE+NON SCHEDULE ITEMS) Rs. 9724.80
WATER SUPPLY PIPES AND FITTINGS - III
1 Providing & fixing G.I. pipes complete with G.I. fittings &
clamps including cutting & making good the walls etc.
(internal work)
i) Exposed on wall
a) 25mm dia nominal bore (medium duty) 18.10.3 5 Rm. 491.20 409.91 2049.53
b) 32mm dia nominal bore (medium duty) 18.10.4 3 Rm. 893.20 745.38 2236.13
ii) Concealed pipe including painting with anticorrosive
bitumatic paint, cutting chases and making good the wall.
a) 15mm dia nominal bore 18.11.1 5 Rm. 485.20 404.90 2024.50
b) 20mm dia nominal bore 18.11.2 3 Rm. 541.10 451.55 1354.64
2 Painting G.I. pipes and fittings with two coats of anti
corrosive bitumastic paint of approved quality.
a) 15mm dia nominal bore. 18.40.1 15 Rm. 10.05 8.39 125.80
b) 20mm dia nominal bore. 18.40.2 10 Rm. 12.00 10.01 100.14
c) 25mm dia nominal bore. 18.40.3 5 Rm. 15.25 12.73 63.63
d) 32mm dia nominal bore. 18.40.4 3 Rm. 18.40 15.35 46.06
3 Providing and fixing 45 cm long unplasticised PVC
connection pipe with brass unions.
a) 15mm nominal bore [Link] 2 Nos. 85.20 71.10 142.20
4 Providing & fixing CP brass bib cock of approved quality
conforming to IS 8931
a) 15mm nominal bore 18.49.1 0 Nos. 434.20 362.34 0.00
5 Providing & fixing C.P. brass long body bib cock of approved
quality conforming to IS standards and weighing not less than
690 gms.
a) 15mm nominal bore 18.51.1 12 Nos. 708.40 591.16 7093.92
6 Providing & fixing C.P. brass angle valve for basin mixer and
gyser points of approved quality conforming to IS 8931
a) 15mm nominal bore 18.53.1 0 Nos. 500.35 417.54 0.00
7 Providing and fixing gun metal gate valve with wheel of
approved quality.
a) 25mm dia nominal bore 18.17.1 0 Each 532.35 444.25 0.00
b) 32mm dia nominal bore 18.17.2 0 Each 589.90 492.27 0.00
8 Providing and placing on terrace (at all floor levels)
polyethylene water storage tank of approved brand and
manufacture with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow pipes
but without fittings and the base support for tank.
18.48 1000 Ltrs. 9.70 8.09 8094.65
TOTAL(SCHEDULE ITEMS) 23331.20
TOTAL( NON SCHEDULE ITEMS) 0.00
TOTAL( SCHEDULE+NON SCHEDULE ITEMS) 23331.20
SCHEDULE OF QUANTITIES FOR INTERNAL SEWERAGE SYSTEM - IV
1 Excavating trenches in all kind of soil of required width for
pipes, cables etc. including excavation for sockets and
dressing of sides, ramming of bottoms, depth upto 1.5 m.
including getting out the excavated soil & then returning the
soil as required,
in layers not exceeding 20cm in depth including consolidating
each deposited layer by ramming, watering, etc & disposig of
surplus excavated soil as directed within a lead of 50m.
a) Pipes 80mm to 300mm diameter. [Link] 0 RM 417.35 348.28 0.00
2 Providing, laying and joining glazed stone ware pipes grade
'A' with stiff mixture of cement mortar in the proportion of
1:1 (1 cement : 1 fine sand) including testing of joints etc.
complete.
a) 100mm diameter 19.1.1 0 M 375.75 313.56 0.00
b) 150mm diameter 19.1.2 0 M 591.40 493.52 0.00
3 Providing & laying cement concrete [Link] (1 cement :5
coarse sand :10 graded stone aggregate 40mm nominal size)
alround S.W. Pipes including bed concrete as per standard
design.
a) 100mm diameter S.W. Pipe 19.2.1 0 M 895.50 747.29 0.00
b) 150mm diameter S.W. Pipe 19.2.2 0 M 1095.15 913.90 0.00
4 Providing and fixing square mouth S.W. Gully trap grade 'A'
complete with C.I. grating brick masonry chamber with
F.P.S. bricks of class designation 75 and water tight C.I.
cover with frame of 300 x 300mm. size (inside) the weight of
cover to be not
less than 4.50 Kg and frame to be not less than 2.70 Kg as per
standard design.
a) 150 x 100 mm. size P type [Link] 3 Nos 2428.45 2026.54 6079.62
5 Constructing brick masonry manhole in cement mortar 1:4 (1
cement :4 coarse sand) RCC top slab with [Link] mix (1
cement :2 coarse sand :4 graded stone aggregate 20mm
nominal size), foundation concrete [Link] mix (1 cement :4
coarse sand :8 graded stone aggregate 40mm nominal size)
inside plastering 12mm thick with cement mortar 1:3 (1
cement :3 coarse sand) finished with floating coat fo neat
cement and making channels in cement concrete [Link] (1
cement :2 coarse sand :4 graded stone aggregate 20mm
nminal size) finished with a floating coat of neat cement
complete as per standard design
19.7
a) Inside size 90x80 cm & 45 cm deep including C.I. cover
with frame (light duty) total wt. of cover & frame to be not
less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
[Link] 0 Nos 11687.10 9752.88 0.00
b) Extra for depth of man hole size 90x80 cm [Link] 0 Rm. 8127.45 6782.36 0.00
c) Inside size 90x120 cm & 90 cm deep including C.I. cover
with frame (medium duty) total wt. of cover & frame to be
not less than 116 Kg (wt. of cover 58 Kg & wt. of frame 58
Kg.
[Link] 0 Nos 24405.90 20366.72 0.00
d) Extra for depth of man hole size 90x120 cm [Link] 0 Rm. 9744.25 8131.58 0.00
6 Providing M.S. foot rests including fixing in manholes with
20x20x10 cm cement concrete blocks [Link] (1 cement:3
coarse sand :6graded stone aggregate 20 mm nominal size) as
per standard design
19.15
With 20x20 mm square bar 19.15.1 0 Nos 461.35 385.00 0.00
TOTAL(SCHEDULE ITEMS) 6079.62
TOTAL(NON SCHEDULE ITEMS) 0.00
TOTAL(SCHEDULED+NON SCHEDULE ITEMS) Rs. 6079.62
SUMMARY OF COST
SANITARY FIXTURES & ACCESSORIES SUB-HEAD I 37133.04
SOIL WASTE & VENT PIPES AND FITTINGS SUB-HEAD II 9724.80
WATER SUPPLY PIPES AND FITTINGS SUB-HEAD III 23331.20
INTERNAL SEWERAGE SYSTEM SUB-HEAD IV 6079.62
SUB TOTAL 76268.67
SAY Rs 76269.00
SCHEDULE OF QUANTITIES FOR ELECTRICAL WORKS
BILL OF QUANTITY
PART (A): SCHEDULE ITEMS (AS PER PWD SCHE. 2018)
[Link]. SCH. No. DESCRIPTION UNIT QTY. RATE AMOUN
T
1 138(C) Wiring points for light with 1 [Link]
PVC insulated multistrand single core
copper condutor cable in PVC conduit pipe
partly concealed in the wall and partly laid
in slab along with the reinforcement before
concreting, complete with 1.5 sq. mm. FR
PVC insulated multistrand copper earth
contunity wire,piano type switch & ceiling
rose/angle/batten holder on 3mm thick
phenolic paminated backalite sheet
[Link] in all [Link] directed
including matching colour wash.
Each 5 610.00 3050.00
2 140(C) Wiring points for Fan /Fresh air fan (light
duty exhaust fan )with 1 [Link] PVC
insulated multistrand single core copper
condutor cable in PVC conduit pipe partly
concealed in the wall and partly laid in slab
along with the reinforcement before
concreting, complete with 1.5 sq. mm. FR
PVC insulated multistrand copper earth
contunity wire,piano type switch & ceiling
rose on 3mm thick phenolic paminated
backalite sheet [Link] in all
[Link] directed including matching
colour wash.
Each 0 671.00 0.00
3 141(C) Wiring points for Plug with 1 [Link]
PVC insulated multistrand single core
copper condutor cable in PVC conduit pipe
partly concealed in the wall and partly laid
in slab along with the reinforcement before
concreting, complete with 1.5 sq. mm. FR
PVC insulated multistrand copper earth
contunity wire,piano type switch & socket
sheet [Link] in all [Link] directed
including matching colour wash.
Each 1.00 327.00 327.00
4 703 Supply and burying of 600mm x 600
mmx6mm G.I. plate, vertically for earthing
with its top atleast 3 mts. below ground level
complete with 20mm [Link] and funnel for
watering and two earthing leads of
No.8to10SWG [Link] in 15mm diaG.I.
pipe upto switch board (from apron to
switch board the cost of G.I. pipe and G.I.
wire will be extra) 30cm. square C.I. frame
with hinged cover, masonary housing,
alternate layers/of charcoal/ coke and salt at
least 150mm thick alround etc. complete in
all respects.
Each 1 5380.00 5380.00
5 716 Supplying & Laying of 25mmx3mm G.I.
Strip for earthing purpose as required
complete in all respects. Metre 15 90.00 1350.00
6 723 Supply & fixing of two number 8 SWG G.I.
wire for earthing purpose as required
complete in all respects. Metre 15 210.00 3150.00
7 Supply and Fixing of LED Tube Light with
batten suitable for up to 1X22 watt LED
tube light fitting complete including tube
on surface complete in all respect.
1413 1 X 22 W CAT-AAA Each 5 1190.00 5950.00
8 1501 Supply of Ceiling Fan with motor of A.C.
Permanent insulation capacitor rating
confirming BEE 5 Star rating and IS:374/79
and also comply with IS:1709/1984 with
latest amendment. The rated volage 220/240
volts, 50 Hz, 1-ph [Link] fan assemble
should consists of down rod blades, shackle
canopies etc and with double ball bearing
system.
(i) BEE 5 Star rated-1200mm sweep Each 0 1800.00 0.00
9 301 Supply and fixing of 16 A SPN metal clad
rewireable type switch fuse unit complete
on M.D.F.E.G/Teak wood complete in all
respects.
Each 1 676.00 676.00
10 1116 Erection and testing of ceiling fan and
regulator for room height upto 3.5mts.
including supply of 3mm thick G.I. down
rod 19mm dia duly painted, complete in all
respects.
Each 0 140.00 0.00
11 1149 S/F of hexagonal fan box with hexagonal
side of approx 80mm in length fabricated
from 16 SWGM.S. sheet incorporating
10mm dia, M.S. round barduly bent for
supporting fan hanger dully painted withred
oxide and screwing arrangement with wiring
conduit laid in the R.C.C. roof before
concreting along with supply of all
materials, labour T & P etc., for proper
completion of work.
Each 0 150.00 0.00
12 1203(A) Supply fixing of electronic fan regulator
120-280 V. ISI marked, on the existing
switch board including making connetion,
required material, labour T/P etc for proper
completion of work to the satisfaction of
Engineer in charge of work.
Each 0 267.00 0.00
13 Supply and laying of aluminium conducter,
PVC insulated armoured, served, sheeted
cable 1000 bolts grade at a depth of 750mm
below ground level over a cushion of 75mm
thick sand alround and protected with burnt
bricks on sides and top on surface, the
cable run shall be fixed on M.S. clamps etc.
of suitable size.
501 (a) 6 sqmm 2 core Metre 10 276.00 2760.00
14 Supply & fixing of brass nickle plated
compression gland for PVC insulated &
armoured served sheathed, underground
cable including rubber ring etc. complete in
all respects. The armouring of the cable shall
be properly connected with the earth as per
dire
503 (a) 6 sqmm 2 core Each 2 76.00 152.00
15 504 Supplying and fixing of Palm / pin type
copper tin plated cables sockets (lugs) to the
cable leads, insuslating with tape and
making of connections etc. complete in all
respects as per direction of Engineer-
Incharge.
504(b) 6 sqmm Each 4 18.00 72.00
TOTAL (SCHEDULED ITEMS) 22867.00
PART B - NON - SCHEDULED ITEMS (AS PER MARKET RATES )
1 Providing and Laying PVC pipe including
jointing , cutting and making good the walls
& floors as per requirement.
a) NS 63mm Metre 5 225.00 1125.00
TOTAL NON SCHEDULED ITMES 1125.00
COST SUMMARY
(ELECTRICAL WORKS
TOTAL (SCHEDULED ITEMS 22867.00
TOTAL (NON-SCHEDULED ITEMS) 1125.00
TOTAL (SCHEDULED + NON-
SCHEDULED ITEMS) 23992.00
SAY 23992.00
A.R.-II
ANALYSIS OF RATE
OPEN SURFACE DRAIN ( SIZE = 150 MM. X 150 MM )
[Link]. Description of Item [Link]. Measurement Qty. Unit Rate Amount
No. L (m) B (m) H/D (m)
1 2 3 4 5 6 7 8 9 10 11
1 Earth work in excavation D.S.R. 2.6.1 1 1.000 0.600 0.225 0.135 Cum 177.50 23.96
2 P.C.C. [Link]
D.S.R. 4.1.8 1 1.000 0.600 0.075 0.045 Cum 6812.00 306.54
3 Brick work in 1:6 cement
motar (cement : coarse sand)
in foundation.
D.S.R. 6.1.2 2 1.000 0.230 0.150 0.069 Cum 7132.95 492.17
4 12 MM thick plaster (1:4) 13.7.2 2 1.000 0.610 1.220 Sqm. 425.55 519.17
13.7.2
2 1.000 0.150 0.300 Sqm. 425.55 127.66
GRAND TOTAL RS. 1469.512
[Link]. DESCRIPTION UNIT QTY. RATE
1 Blue Star 200L Cooling and 400L Storage Water
Cooler SDLX200400B. Each 1 70000.00
Features :-
Brand Name : Blue Star
Refrigerant : R-22
Power Source : Electric
Dimensions : 1120 x 750 x 1500 mm
Voltage : 230 V
Type of Product : Water Cooler
[Link]. ITEM UNIT QTY. RATE
1 Providing and fixing attachment for joining Submersible pump and
hand Pump Cylinder including carriage, all T&P and Labour
charges
Job 1 1000.00
2 Repairing of old Hand Pump cylinder by re-threading both ends
and replacing washers including all T&P and Labour charges
Job 1 600.00
3 Repairing of old connecting rod by straightening, cutting &
threading including all T&P and Labour charges Job 1 160.00
4 Supplying and fixing new connecting rod for hand pump 3mtr.
Length duly socketed and threated (Supposing 10 Nos. connecting
rods in pipes lowering) including carriage at site.
Per Piece 1 400.00
5 Providing and fixing new Hand Pump head pressure plate with
brass bush, rubber seal, nut & bolts and chain etc. including all
T&P and Labour charges
Job 1 1800.00
6 Providing and fixing of 11/2 *1 inch G.I. reducer in Hand Pump
outlet including cutting welding at site and making arrangement
for lowering cable and wire rope in pedestal of india mark II Hand
pump.
Job 1 956.50
7 Labour charges for lowering of hand pump assembly with
submersible pump in existing bore hole including jointing
connecting rod, G.I. Pipes etc., all required T&P and Labour
charges
Job 1 500.00
[Link]. ITEM UNIT QTY. RATE
1 Providing and Laying PVC pipe including jointing ,
cutting and making good the walls & floors as per
requirement.
a) 63mm Metre 1 225.00
ANALYSIS OF RATES
Providing and laying of 80 mm th. Interlocking
C.C. pavers on base of 75 mm th. L.C. ([Link]) 1
cement & 4 fine sand with 40 mm gauge stone
ballast including 4 cm thick fine sand cushion
and 3 cm thick fine sand filling over entire
surface of interlocking and gap and corner filled
with (1:3) cement mortar including cost of all
1 material labour T&P
Cost of L.C. ([Link]), 1x1x0.15 0.15 cum
Add 10% undulation 0.015
Total 0.165 cum
LOCAL SAND
For Cushion 1x1x0.04 0.04 cum
For Binding 1x1x0.03 0.03 cum
Total 0.07 cum
[email protected]/cum 46.9
Labour charge for laying tiles labour Rs 85 SQM
Total 940.4 SQM
PAVERS
Pavers / SQM 35.00 NOS. @ 12.50 EACH
(Using 50% Grey Base & 50% Red base )
Rs. 22.50
PWD - Material -19 Rs 787.50
Add cost for cartage @ 2 % Rs 15.75
Total 803.25 SQM
Total Cost for laying Interlocking Tiles Rs 1743.65 PER SQM'
DETAILED ESTIMATE OF PROPOSED ENTRANCE GATE
ABSTRACT OF COST (GATE 4.50 MT. WIDE)
(Based on U.P.P.W.D. S.O.R. for District: Prayagraj w.e.f. 01-05-2022 & D.S.R.-2021)
S.N. DESCRIPTION OF ITEM SCH. NO. QUANTITY UNIT RATES RATES*0.8345 AMOUNT
[SCHEDULED]
1 Excavation in foundation in ordinary soil (loam clay or sand)
including lift upto 1.50 meter and lead upto 30 meter and
including filling, watering and ramming of excavated earth
into the trenches or into the space between the building and
sides of foundation trenches or into the plinth and removal
and disposal of sur-plus earth as directed by the Engineer
incharge up to a distance of 30 meters from the foundation
trenches.
PWD-251 2.59 CUM 160.00 414.48
2 Providing and laying in cement concrete [Link] (1 cement :4
coarse sand :8 graded stone aggregate 40 mm nominal size)
and curing complete,including cost of form- work, in
foundation and floors.
(PWD-281) 0.54 CUM 5800.00 3110.25
3 R.C.C. work with cement approved coarse sand and 2 cm.
guage approved stone grit in the proportion of 1:1.5:3 in
lintels of doors and windows excluding supply of
reinforcement and its fixing and binding the same with 24
BWG binding wire and including necessary centering and
shuttering [Link] also including supply of all materials,
labour and tools and plants etc, required for proper
completion of the works. including cost of binding wire. The
rate excludes making of drip course which shall be paid
extra.
4 As in item no. 3 above but for slabs (Using 1:1.5:3 Mix
concrete) PWD-284
2.70 CUM 8650.00 23355.00
5 As in item 3 but for the lighter beams i.e. having spans upto
6 m. (Using 1:1.5:3 Mix concrete) PWD-285
9.72 CUM 9200.00 89424.00
6 As in item 3 above but in R.C.C. Raft foundation and
footing with approved stone ballast. (Using 1:1.5:3 Mix
concrete) PWD-287a 1.31 CUM 7800.00 10249.20
6a. Boring with hydraulic piling rigs with power units,
providing and installing cast in situ single under reamed
piles of specified diameter and length below pile cap in M-
25 cement concrete, to carry a safe working load not less
than specified, excluding the cost of steel reinforcement but
including the cost of boring with bentonite solution and the
length of the pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be measured
upto to the bottom of pile cap) :400 mm dia piles
D.S.R.-20.3.2 30.00 RM 3178.00 2652.04 79561.23
7 As in item 3 above but in R.C.C. columns in 1:1.5:3 having
strength not less than M-20. PWD-289
1.46 CUM 9800.00 14288.40
8 P/F Mild steel or iron in plain work such as reinforced
concrete or reinforced, brick work (when not included in
over all rates ) wrought to required shape as necessary
including bending for proper completion of the work and
including supply of steel its wastage bend hooks and
authorised over lapping shall be measured upto floor two
level.
D.S.R.-5.22.6 34.33 QTL 8965.00 307752.31
9 Class M-150 brick work in 1:6 cement coarse sand (of 2.25
fineness modulus) mortar in foundation & plinth including
supply of all materials, labour, tools and plants etc. required
PWD-
for proper completion of the work.
303+305a-305 0.00 CUM 5193.00 0.00
10 Providing and fixing double scaffolding system (cup lock
type) on the exterior side, up to seven story height made
with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal
& vertical tubes joining with cup & lock system with M.S.
tubes, M.S. tube challies, [Link] and M.S. staircase
system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required
duration as approved and removing it there after .The
scaffolding system shall be stiffened with bracings, runners,
connection with the building etc wherever required for
inspection of work at required locations with essential safety
features for the workmen etc. complete as per directions and
approval of Engineerin- charge .The elevational area of the
scaffolding shall be measured for payment purpose .The
payment will be made once irrespective of duration of
scaffolding.
This item to be used for maintenance work judicially,
necessary deduction for scaffolding in the existing item to be D.S.R.-
done. 14.72*0.8345 51.30 SQM 285.00 237.83 12200.81
11 Stone work (machine cut edges) for wall lining etc. (veneer
work) upto 10 metre height, backing filled with a grout of
average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse
sand) including pointing in white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment
matching the stone shade : (To be secured to the backing and
the sides by means of cramps and pins which shall be paid
for separately) :Red sand stone - exposed face fine dressed
with rough
backing.50 mm thick D.S.R.-
[Link]*0.834
5 20.94 SQM 4527.65 3778.32 79118.10
12 Providing and fixing stainless steel cramps of required size
and shape for anchoring stone wall lining to the backing or
securing adjacent stones in stone wall lining in cement
mortar 1:2 (1 cement : 2 coarse sand), including making the
necessary chases in stone and holes in walls
wherever required.
D.S.R.-
8.15*0.8345 20.94 KG 624.95 521.52 10920.65
13 Providing and fixing copper pins 7.5 cm long 6 mm diameter
for securing adjacent stones in stone wall lining in cement
mortar 1:2 (1 cement : 2 coarse sand), including making the
D.S.R.-
necessary chases.
8.16*0.8345 41.88 EACH 37.60 31.38 1314.08
14 Cost of carving work (As per Quotation) MR 18.77 12418.00 233061.02
TOTAL 864769.52
Say Rs. 8.65 Lacs.
DETAILED ESTIMATE OF PROPOSED ENTRANCE GATE
DETAILS OF MEASUREMENT
[Link]. DESCRIPTION OF ITEM NO. L B H QTY UNIT
1 Earth work in excavation
UNDER FOOTING
GP1 (2P1) 2 1.775 0.750 0.700 1.864
TIE BEAM
TB1 1 4.500 0.380 0.425 0.727
TOTAL 2.590 CUM
2 Base concrete ([Link]) stone aggregate
UNDER FOOTING
GP1 (2P1) 2 1.775 0.750 0.100 0.266
TIE BEAM
TB1 1 4.500 0.600 0.100 0.270
TOTAL 0.536 CUM
3 R.C.C. work in Lintel
TOTAL 0.000 CUM
4 R.C.C. work in slab
1 7.500 1.800 0.200 2.700
TOTAL 2.700 CUM
5 R.C.C. work in beams
(a) Ground Floor
TIE BEAM
TB1 1 4.500 0.600 0.600 1.620
BEAM
B1 1 7.500 1.800 0.600 8.100
TOTAL 9.720 CUM
6 [Link] in Raft foundation
GP1 (2P1) 2 1.625 0.600 0.600 1.170
2 0.600 0.600 0.200 0.144
TOTAL 1.314 CUM
6a. Pile Work (400 mm dia)
4 7.500 30.000 RM
4*0.25*3.14*0.400*0.400*7.50 3.77 CUM
7 R.C.C. Column
2 0.450 0.450 3.600 1.458
TOTAL 1.458 CUM
8 M. S. work in R.C.C.
(a) Ground Floor
qty same as item no (4)*1.00*0.785 (Slab) 2.120
qty same as item no (5)*2.1*0.785 (Beam) 16.023
qty same as item no (6)*2.7*0.785 (footing) 2.785
qty same as item no (6a)*3.00*0.785 (Pile) 8.874
qty same as item no (7)*3.955*0.785 (Column) 4.527
TOTAL 34.328 QTL
9 Brick work in foundation
TOTAL 0.000 CUM
10 Scaffolding work
2 4.500 5.700 51.300
TOTAL 51.300 SQM
11 Red Sand stone cladding
4 0.450 2.700 4.860
4 0.450 1.200 2.160
2 3.800 1.500 11.400
2 3.600 0.350 2.520
TOTAL 20.940 SQM
12 Cramps
TOTAL 20.940 KG
13 Pin 41.88 NOS.
14 Carving Work
4 0.450 1.500 2.700
4 0.450 0.500 0.900
2 7.500 0.800 12.000
2 3.600 0.440 3.168
TOTAL 18.768 SQM
BILL OF QUANTITY OF OF PROPOSED SIGNAGE
AT :-, DISTRICT :- PRAYAGRAJ (U.P.)
ABSTRACT OF COST
(Based on U.P.P.W.D. S.O.R. for District: Prayagraj w.e.f. 01.05.2022/ & DSR-2021)
S.N. DESCRIPTION OF ITEM SCH. NO. QUANTITY UNIT RATES RATES*0.8345 AMOUNT
[SCHEDULED]
1 Excavation in foundation in ordinary soil (loam
clay or sand) including lift upto 1.50 meter and
lead upto 30 meter and including filling,
watering and ramming of excavated earth into
the trenches or into the space between the
building and sides of foundation trenches or
into the plinth and removal and disposal of
sur-plus earth as directed by the Engineer
incharge up to a distance of 30 meters from
the foundation trenches.
PWD-251 2.288 CUM 160.00 366.01
2 Providing and laying in position cement
concrete of specified gradeexcluding the cost
of centering and shuttering - All work up to
plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8
graded stone aggregate 40mm nominal size)
PWD-281 0.318 CUM 5800.00 1841.79
3 R.C.C. work with cement approved coarse
sand and 2 cm. guage approved stone grit in
the proportion of 1:1.5:3 in lintels of doors
and windows excluding supply of
reinforcement and its fixing and binding the
same with 24 BWG binding wire and including
necessary centering and shuttering [Link]
also including supply of all materials, labour
and tools and plants etc, required for proper
completion of the works. including cost of
binding wire. The rate excludes making of drip
course which shall be paid extra.
PWD-
283+2.06*280.00
(a) Ground Floor 0.186 CUM 8759.78 1631.95
4 As in item 3 above but in R.C.C. Raft
foundation and footing with approved
stone ballast.(Using 1:1.5:3 Mix concrete)
PWD-287a 0.392 CUM 7800.00 3060.72
4a. Boring with hydraulic piling rigs with power
units, providing and installing cast in situ
single under reamed piles of specified
diameter and length below pile cap in M-25
cement concrete, to carry a safe working load
not less than specified, excluding the cost of
steel reinforcement but including the cost of
boring with bentonite solution and the length
of the pile to be embedded in pile cap etc. all
complete.
(Length of pile for payment shall be measured
upto to the bottom of pile cap) :300mm
D.S.R.-20.3.1 9.000 RM 2560.90 2137.07 19233.64
5 As in item 3 above but in R.C.C. columns in
1:1.5:3 having strength not less than M-20.
PWD-289 0.259 CUM 9800.00 2540.26
6 First Class brick work in 1:6 cement and coarse
sand of 1.25 F.M. mortar in foundation and
plinth including supply of all materials, labour,
tools and plants etc. required for proper
completion of the work. (1:6 cement & coarse
sand)
PWD-303+305a-305 0.000 CUM 5193.00 0.00
7 Brick work in super-structure above plinth
level up to floor two level (up to two storeys)
including necessary cutting and moulding of
bricks as required and also including honey
comb brick work thickness of wall not to be
less than 1.5 brick thick. (1:6 cement & coarse
sand)
PWD-303+305a-
305+309+310 0.000 CUM 5834.00 0.00
8 Brick work in 1:4 cement and coarse sand
mortar in superstructure for wall thickness 12 PWD-
cms & below brick work. 305a+309+310+310
a 0.000 CUM 6521.00 0.00
9 P/F Mild steel or iron in plain work such as
reinforced concrete or reinforced, brick work
(when not included in over all rates ) wrought
to required shape as necessary including
bending for proper completion of the work
and including supply of steel its wastage bend
hooks and authorised over lapping shall be
measured upto floor two level.
(D.S.R.-5.22.6)
1.648 QTL 8965.00 7481.29 12327.48
10 Stone work (machine cut edges) for wall lining
etc. (veneer work) upto 10 metre height,
backing filled with a grout of average 12 mm
thick cement mortar 1:3 (1 cement : 3 coarse
sand) including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust)
with an admixture of pigment matching the
stone shade : (To be secured to the backing
and the sides by means of cramps and pins
which shall be paid for separately) :Stone
work (machine cut edges) for wall lining etc.
(veneer work) upto 10 metre height, backing
filled with a grout of average 12 mm thick
cement mortar 1:3 (1 cement : 3 coarse sand)
including pointing in white cement mortar 1:2
(1 white cement : 2 stone dust) with an
admixture of pigment matching the stone
shade : (To be secured to the backing and the
sides by means of cramps and pins which shall
be paid for separately) :Red sand stone -
exposed face fine dressed with rough
backing.30 mm thick
D.S.R.-[Link] 2.540 SQM 5295.90 4419.43 11225.35
10a. Providing and fixing stainless steel cramps of
required size and shape for anchoring stone
wall lining to the backing or securing adjacent
stones in stone wall lining in cement mortar
1:2 (1 cement : 2 coarse sand), including
making the necessary chases in stone and
holes in walls wherever required.
D.S.R.-8.15*0.8345 2.540 KG 714.40 596.17 1514.26
10b. Providing and fixing copper pins 7.5 cm long 6
mm diameter for securing adjacent stones in
stone wall lining in cement mortar 1:2 (1
cement : 2 coarse sand), including making the
necessary chases.
D.S.R.-8.16*0.8345 10.000 NOS. 43.90 36.63 366.35
12 Cost of Stone writing (As per Quotation) MR 4.000 SQM 12418.00 49672.00
TOTAL 103779.81
DETAILED MEASUREMENTS OF PROPOSED SIGNAGE
AT :-, DISTRICT :- PRAYAGRAJ (U.P.)
DETAILES OF MEASUREMENT
[Link]. DESCRIPTION OF ITEM NO. L B H QTY UNIT
1 Earth work in excavation
UNDER FOOTING
GP1(2P1) 2 1.775 0.750 0.750 1.997
GRADE BEAM 1 1.800 0.380 0.425 0.291
TOTAL 2.288 CUM
2 Base concrete ([Link])
UNDER FOOTING
GP1(2P1) 2 1.775 0.750 0.100 0.266
GRADE BEAM 1 1.800 0.380 0.075 0.051
TOTAL 0.318 CUM
3 R.C.C. work in Lintel
GRADE BEAM 1 1.800 0.230 0.300 0.124
TOP BAND 1 1.800 0.230 0.150 0.062
TOTAL 0.186 CUM
4 R.C.C. work in Raft foundation
GP1(2P1) 1 1.800 0.600 0.300 0.324
2 0.380 0.600 0.150 0.068
TOTAL 0.392 CUM
4a. Pile work
2 4.500 9.000 RM
2*0.25*3.14*0.300*0.300*4.50 0.636 CUM
5 R.C.C. work in Column
2 0.230 0.230 2.450 0.259
TOTAL 0.259 CUM
6 B/W In foundation
TOTAL 0.000 CUM
7 B/W In Superstructure
1 1.200 0.460 0.450 0.248 CUM
1 0.900 0.230 2.000 0.414 CUM
TOTAL 0.000 CUM
8 B/W In Superstructure (115 mm thk.)
0 2.400 0.115 2.000 0.000 CUM
9 M. S. work in R.C.C.
qty same as item no (3a)*1.50*0.785 (Lintel) 0.219
qty same as item no (4)*1.00*0.785 (Footing) 0.308
qty same as item no (4a)*1.2*0.785 (Pile) 0.998
qty same as item no (5)*0.6*0.785 (Column) 0.122
TOTAL 1.648 QTL
10 Red sand stone cladding
2 1.800 0.450 1.620
2 0.230 2.000 0.920
TOTAL 2.540 SQM
10a. Stainless steel Cramp
1 2.540 4.000 0.250 2.540 KG
10b. Copper Pin
1 2.540 4.000 10.160
10.000 NOS.
12 stone writing 2 2.000 1.000 4.000 SQM
BILL OF QUANTITY OF OF PROPOSED YATRI SHED
AT :- , DISTRICT :- FATEHPUR (U.P.)
ABSTRACT OF COST
(Based on U.P.P.W.D. S.O.R. for District: Prayagraj w.e.f. 01.05.2022/ & DSR-2021)
S.N. DESCRIPTION OF ITEM SCH. NO. QUANTITY UNIT RATES RATES*0.8345 AMOUNT
[SCHEDULED]
1 Excavation in foundation in ordinary soil (loam clay
or sand) including lift upto 1.50 meter and lead
upto 30 meter and including filling, watering and
ramming of excavated earth into the trenches or
into the space between the building and sides of
foundation trenches or into the plinth and removal
and disposal of sur-plus earth as directed by the
Engineer incharge up to a distance of 30 meters
from the foundation trenches.
PWD-251 29.224 CUM 160.00 4675.80
2 Filling of carted earth. AR-I 0.000 CUM 436.00 0.00
3 Providing and laying in position cement concrete of
specified gradeexcluding the cost of centering and
shuttering - All work up to plinthlevel :1:4:8 (1
Cement : 4 coarse sand : 8 graded stone aggregate
40mm nominal size)
PWD-281 8.827 CUM 5800.00 51193.90
4 Sand filling in plinth including supply of necessary
quantity of sand from a distance not exceeding 8
kms. from the site of work and including watering,
dressing etc rate to include cost of all materials
labour T & P etc required for proper completion of
work.
PWD-255+Labour 5.504 CUM 780.00 4292.73
5 Providing and injecting chemical emulsion for pre
constructional antitermite treatment and creating a
chemical barrier under and alround the column pits
wall trenches basement excavation top surface if
plinth filling junction of wall and floor, along the
the external perimeter of binding expansion joints,
surrounding of pipes and conduits etc, complete.
(plinth area of the building at ground floor only
shall be measured as per I.S.6313 (PartII 1981)
Alderine emulsifiable concentrate or any other
approved material such as Heptrachlor or
Chlordane will be used. The rate of application of
chemical emulsion shall be as follows : (1)
Treatment for masonary & foundation 5 liters per
sqm. (2) Back fill in immediate contact with
foundation 7.5 liters/sqm (3) Treatment of top
surface of plinth filling 5 liters/sqm
(4) Treatment junction of wall and the floor 7.5
liters /sqm (5) Treatment of soil along external
perimeter of building 7.5 liters/sqm (6) Treatment
of soil under apron along external perimter 5
liters/sqm. (As per manufacturer's standard
dilution)
PWD-CH-08 82.950 SQM 210.00 17419.50
6 R.C.C. work with cement approved coarse sand and
2 cm. guage approved stone grit in the proportion
of 1:1.5:3 in lintels of doors and windows excluding
supply of reinforcement and its fixing and binding
the same with 24 BWG binding wire and including
necessary centering and shuttering [Link] also
including supply of all materials, labour and tools
and plants etc, required for proper completion of
the works. including cost of binding wire. The rate
excludes making of drip course which shall be paid
extra.
PWD-
283+2.06*280.00
(a) Ground Floor 0.000 CUM 9076.80 0.00
7 As in item no. 6 above but for slabs (Using 1:1.5:3
Mix concrete) PWD-284
(a) Ground Floor 4.586 CUM 8650.00 39671.06
8 As in item 6 but for the lighter beams i.e. having
spans upto 6 m. (Using 1:1.5:3 Mix concrete)
PWD-285
(a) Ground Floor 4.904 CUM 9200.00 45117.35
9 As in item 6 above but in R.C.C. Raft foundation
and footing with approved stone ballast.(Using
1:1.5:3 Mix concrete)
PWD-287a 20.108 CUM 7800.00 156845.81
9a. Boring with hydraulic piling rigs with power units,
providing and installing cast in situ single under
reamed piles of specified diameter and length
below pile cap in M-25 cement concrete, to carry a
safe working load not less than specified, excluding
the cost of steel reinforcement but including the
cost of boring with bentonite solution and the
length of the pile to be embedded in pile cap etc.
all complete.
(Length of pile for payment shall be measured upto
to the bottom of pile cap) :300mm
D.S.R.-20.3.1 180.000 RM 2560.90 2137.07105 384672.79
10 As in item 6 above but in R.C.C. columns in 1:1.5:3
having strength not less than M-20. (PWD-289)
(a) Ground Floor 2.700 CUM 9800.00 26460.00
11 First Class brick work in 1:6 cement and coarse
sand of 1.25 F.M. mortar in foundation and plinth
including supply of all materials, labour, tools and
plants etc. required for proper completion of the
work. (1:6 cement & coarse sand)
PWD-303+305a-
305 0.000 CUM 5193.00 0.00
12 P/F Mild steel or iron in plain work such as
reinforced concrete or reinforced, brick work
(when not included in over all rates ) wrought to
required shape as necessary including bending for
proper completion of the work and including
supply of steel its wastage bend hooks and
authorised over lapping shall be measured upto
floor two level.
(D.S.R.-
5.22.6*0.8222)
(a) Ground Floor 86.694 QTL 8965.00 7481.2925 648586.76
13 Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
make, in all colours and shades, laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm
including grouting the joints with white cement and
matching pigments etc., [Link] of Tile
600x600 mm
(a) Ground Floor D.S.R.. 11.41.2 36.690 SQM 1416.65 1182.194425 43374.71
14 Providing and laying vitrified floor tiles in different
sizes (thickness to be specified by the
manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved
make, in all colours and shades, laid on 20mm thick
cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm
including grouting the joints with white cement and
matching pigments etc., [Link] of Tile
600x600 mm
(a) Ground Floor D.S.R.. 11.46.2 4.569 SQM 1466.50 1223.79425 5591.52
15 Cement concrete flooring [Link] (1 cement :2 coarse
sand :4 graded stone aggregate 12-20mm nominal
size laid in one layer neat cement (25 mm thick
floor).
PWD-601 A 27.414 SQM 293.00 8032.30
16 Providing & laying "brick Coba" 12mm thick laid
with M-150 class brick bat coba 7.50 cm thick with
gap of 15mm to each other, over 20mm thick base
of cement mortar 1:4 cement and coarse sand
mixed with water proofing compound spreading
cement slurry mixed with acrylic cement concrete
water proofing compound filled gaps of
coba & top of coba mortar mixed with water
proofing compound in 1:4 cement and coarse sand
mortar finished smooth & top mashed false square
30 cm x 30 cm and side wall parapet shall be mono
lythic plaster wall upto 30cm higher and junction
and corner shall be rounded by brick
ballast cement and coarse sand masonry coba with
top finished plaster mixed with acetic water
proofing compound @ 2% by weight & including
S/o all material, labour T & P etc complete for
proper completion of work.
D.S.R.-22.7.1
36.690 SQM 1522.95 1270.901775 46629.39
17 Construction of drain alongwith apron. AR-II 30.460 RM 1469.51 44761.34
18 Stone work (machine cut edges) for wall lining etc.
(veneer work) upto 10 metre height, backing filled
with a grout of average 12 mm thick cement mortar
1:3 (1 cement : 3 coarse sand) including pointing in
white cement mortar 1:2 (1 white cement : 2 stone
dust) with an admixture of pigment matching the
stone shade : (To be secured to the backing and the
sides by means of cramps and pins which shall be
paid for separately) :Stone work (machine cut
edges) for wall lining etc. (veneer work) upto 10
metre height, backing filled with a grout of average
12 mm thick cement mortar 1:3 (1 cement : 3
coarse sand) including pointing in white cement
mortar 1:2 (1 white cement : 2 stone dust) with an
admixture of pigment matching the stone shade :
(To be secured to the backing and the sides by
means of cramps and pins which shall be paid for
separately) :Red sand stone - exposed face fine
dressed with rough backing.30 mm thick
D.S.R.-[Link] 27.648 SQM 4229.85 3529.809825 97592.18
18a Providing and fixing stainless steel cramps of
required size and shape for anchoring stone wall
lining to the backing or securing adjacent stones in
stone wall lining in cement mortar 1:2 (1 cement : 2
coarse sand), including making the necessary
chases in stone and holes in walls wherever
required.
D.S.R.-8.15*0.8345 27.648 KG 624.95 521.520775 14419.01
18b Providing and fixing copper pins 7.5 cm long 6 mm
diameter for securing adjacent stones in stone wall
lining in cement mortar 1:2 (1 cement : 2 coarse
sand), including making the necessary chases.
D.S.R.-8.16*0.8345 111.000 NOS. 37.60 31.3772 3482.87
19 Cost for Carving Work MR 7.290 SQM 12418.00 90527.22
20 Add for plumbing work (AS PER DETAILED ATTACHED) 12597.57
21 Add for electrical work (AS PER DETAILED ATTACHED) 49790.33
TOTAL 1795734.14
1795734.14
G. TOTAL 1795734.14
Say Rs. 17.96 Lacs.
DETAILED MEASUREMENTS OF PROPOSED YATRI SHED
AT :- , DISTRICT :- FATEHPUR (U.P.)
DETAILES OF MEASUREMENT
[Link]. DESCRIPTION OF ITEM NO. L B H QTY UNIT
1 Earth work in excavation
UNDER FOOTING
GP1 (4P1) 10 1.775 1.775 0.900 28.356
TIE BEAM
TB1 2 12.230 0.380 0.075 0.697
2 3.000 0.380 0.075 0.171
TOTAL 29.224 CUM
2 Filling of carted earth
AVAILABLE EARTH 30% OF ITEM NO. 1 -8.767
UNDER FLOOR
YATRI SHED 1 12.230 3.000 0.125 4.586
TOTAL 0.000 CUM
3 Base concrete ([Link])
UNDER FOOTING
GP1 (4P1) 10 1.775 1.775 0.100 3.151
TIE BEAM
TB1 2 12.230 0.380 0.075 0.697
2 3.000 0.380 0.075 0.171
UNDER FLOOR
YATRI SHED 1 12.230 3.000 0.075 2.752
UNDER APRON
2 12.230 0.900 0.075 1.651
2 3.000 0.900 0.075 0.405
TOTAL 8.827 CUM
4 Sand filling under floor
UNDER FLOOR
YATRI SHED 1 12.230 3.000 0.150 5.504
TOTAL 5.504 CUM
5 Anti-termite treatment 1 82.950
TOTAL 82.950 SQM
6 R.C.C. work in Lintel
(a) Ground Floor
TOTAL 0.000 CUM
7 R.C.C. work in slab
(a) Ground Floor
SLAB
YATRI SHED 1 12.230 3.000 0.125 4.586
TOTAL 4.586 CUM
8 R.C.C. work in beams
(a) Ground Floor
TIE BEAM
TB1 2 12.230 0.230 0.350 1.969
2 3.000 0.230 0.350 0.483
BEAM
B1 2 12.230 0.230 0.350 1.969
2 3.000 0.230 0.350 0.483
TOTAL 4.904 CUM
9 R.C.C. work in Raft foundation
GP1 (4P1) 10 1.625 1.625 0.750 19.805
10 0.450 0.450 0.150 0.304
TOTAL 20.108 CUM
9a. Pile work
40 4.500 180.000 RM
64*0.25*3.14*0.300*0.300*4.50 20.347 CUM
10 [Link] in Column
(a) Ground Floor
UP TO PLINTH LEVEL
C1 10 0.300 0.300 3.000 2.700
TOTAL 2.700 CUM
11 B/W In foundation
TOTAL 0.000 CUM
12 M. S. work in R.C.C.
(a) Ground Floor
qty same as item no (6a)*1.50*0.785 (Lintel) 0.000
qty same as item no (7a)*1.00*0.785 (Slab) 3.600
qty same as item no (8a)*2.50*0.785 (Beam) 9.624
qty same as item no (9)*1.25*0.785 (Footing) 19.731
qty same as item no (9a)*2.9*0.785 (Pile) 46.320
qty same as item no (10a)*3.50*0.785 (Column) 7.418
TOTAL 86.694 QTL
13 Vitrified tiles flooring
(a) Ground Floor
YATRI SHED 1 12.230 3.000 36.690
TOTAL 36.690 SQM
14 Vitrified tiles in skirting
(a) Ground Floor
YATRI SHED 1 30.460 0.150 4.569
TOTAL 4.569 SQM
15 25 mm thick C.C. Flooring
APRON 2 12.230 0.900 22.014
2 3.000 0.900 5.400
TOTAL 27.414 SQM
16 Brick coba treatment
G.F. TERRACE 1 12.230 3.000 36.690
TOTAL 36.690 SQM
17 Making of Drain along Apron
APRON 2 12.230 24.460
2 3.000 6.000
TOTAL 30.460 RM
18 Red sand stone cladding
8 1.280 2.700 27.648
TOTAL 27.648 SQM
18a. Stainless steel Cramp
1 27.648 4.000 0.250 27.648 KG
18b. Copper Pin
1 27.648 4.000 110.592
111.000 NOS.
19 Cost for Carving Work
2 8.100 0.450 7.290
TOTAL 7.290 SQM
SCHEDULE OF QUANTITIES FOR PLUMBING WORKS
BILL OF QUANTITY OF OF PROPOSED YATRI SHED
AT- DISTRICT - FATEHPUR
YATRI SHED
(SCHEDULED ITEMS AS PER D.S.R. 2021)
S.N. Description D.S.R. No. Qty. Unit Rate (Rs.) Rate Amount
(21) (Rs.) (Rs.)
SANITARY FIXTURES & ACCESSORIES : I x0.8345
1 Providing and fixing on wall face unplasticised Rigid
PVC rain water pipes conforming to IS : 13592 Type
A including jointing with seal ring conforming to
IS : 5382 leaving 10 mm gap for thermal expansion .
(i) Single socketed pipes.
a) 110mm diameter 12.41.2 9 Mtr 319.75 266.83 2401.48
2 Making khurras 45x45 cm with average minimum
thickness of 5 cm cement concrete [Link] (1 cement :
2 coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over PVC sheet 1m x 1 m x 400
micron, finished with 12 mm cement plaster 1:3 (1
cement : 3 coarse sand) and a coat of neat
cement,punning,rounding the edges and making and
finishing the outlet complete.
a) 110mm 12.22 0 Nos. 266.60 222.48 0.00
3 Providing and fixing unplasticised -PVC pipe clips of
approved design to unplasticised - PVC rain water
pipes by means of 50x50x50mm hard wood plugs,
screwed with M.S. screws of required length
including cutting brick work and fixing in cement
mortar 1:4 (1 cement : 4 coarse sand) and making
good the wall etc. complete.
a) 110mm 12.43.2 8 Nos. 309.50 258.28 2066.22
4 Providing and fixing 15cm wide 45cm over all semi
circular plain G.S. sheet gutter with iron brackets
40x3mm size, bolts, nuts and washers etc. including
making necessary connections with rain water pipes
complete.
0.80mm thick with zinc coating not less than 275
gm/m2 12.7.1 12.00 Mtr 811.85 677.49 8129.87
TOTAL(SCHEDULE ITEMS) 12597.57
TOTAL( NON SCHEDULE ITEMS) 0.00
TOTAL( SCHEDULE+NON SCHEDULE
ITEMS) Rs. 12597.57
SCHEDULE OF QUANTITIES FOR ELECTRICAL WORKS
PROJECT
BILL OF QUANTITY OF OF PROPOSED YATRI SHED
AT- DISTRICT - FATEHPUR
YATRI SHED
BILL OF QUANTITY
PART (A): SCHEDULE ITEMS (AS PER PWD SCHE. 2018)
[Link]. SCH. No. DESCRIPTION UNIT QTY. RATE AMOUNT
1 138( C) Wiring point for light with 1.5 [Link] FR P.V.C. insulated
+187(A) multistrand single core Copper Conductor cable in PVC conduit
with 1.5 [Link]. FRLSH PVC insulated multistrand copper
conductor cable as earthing wire drawn inside the conduit partly
concealed in wall & partly laid in slab along with the
reinforcement before concreting,complete with modular type
switch & ceiling rose / angle / batten holder on 3 mm thick
phenolic laminated backelite sheet etc complete in all respects as
directed, including matching color wash
Each 8 654.00 5232.00
2 140( C) Wiring point for fan with 1.5 [Link] FRLSH PVC insulated
+187(A) multistrand single core Copper Conductor cable in PVC
conduit pipe partly concealed in wall & partly laid in slab
along with the reinforcement before concreting,complete
with 1.5 [Link]. FRLSH PVC insulated multistrand copper
conductor cable as earthwire drawn inside the conduit partly
concealed in wall & partly laid in slab along with the
reinforcement before concreting,complete with modular type
switch & ceiling rose / angle / batten holder on 3 mm thick
phenolic laminated backelite sheet etc complete in all respects as
directed, including matching color wash
Each 4 715.00 2860.00
3 144( C) Wiring point for exhaust fan with 1.5 [Link] FRLSH PVC
+187(D) insulated multistrand single core Copper Conductor cable in
PVC conduit pipe partly concealed in wall & partly laid in
slab along with the reinforcement before concreting,complete
with 1.5 [Link]. FRLSH PVC insulated multistrand copper
conductor cable as earthwire drawn inside the conduit partly
concealed in wall & partly laid in slab along with the
reinforcement before concreting,complete with modular type
switch & ceiling rose / angle / batten holder on 3 mm thick
phenolic laminated backelite sheet etc complete in all respects as
directed, including matching color wash
Each 0 940.00 0.00
4 141( C) Wiring point for plug 1.5 [Link] FRLSH PVC insulated
+187(C) multistrand single core Copper Conductor cable in PVC
conduit pipe partly concealed in wall & partly laid in slab
along with the reinforcement before concreting,complete
with 1.5 [Link]. FRLSH PVC insulated multistrand copper
conductor cable as earthwire drawn inside the conduit partly
concealed in wall & partly laid in slab along with the
reinforcement before concreting,complete with modular type
switch & socket etc, complete in all respect including matching
colour wash.
Each 0 410.00 0.00
5 149(A) Supply fixing and concealing of 25mm dia.2mm thick PVC
conduit pipe with ISI mark embossed and with PVC acessories
confirming to IS No. 3419 for drawing wires duly sealed at
joints with original resin/ adhesive to make the complete piping
rigid,plastering with cement sand mortar finished to level with
matching colour including cost of material labour and T & P etc
required for proper completion of the work as per directions and
to the satisfaction of engineer in charge. ( T.V. /Telephone)
Metre 20 72.00 1440.00
6 1307(C) Supply & wiring of submains with two number 2.5 [Link]
FRLSH PVC insulated 1100 V grade single core multistrand
copper conductor cable in 20mm dia heavy duty (2mm thick)
PVC conduit with 1 Number 1.5 [Link]. FRLSH PVC insulated
1100 V grade multistrand copper conductor cable as earth
continuity wire drawn inside the conduit complete in all respect.
Metre 20 121.00 2420.00
7 412 Supply & fixing of single wall bracket on matching
M.D.F.E.G. board base etc. complete in all required.
Cat. A Each 0 1650.00 0.00
8 Supply and Fixing of LED Tube Light with batten suitable for
up to 1X22 watt LED tube light fitting complete including tube
on surface complete in all respect.
1413 1 X 22 W CAT-AAA Each 8 1190.00 9520.00
9 1501 Supply of Ceiling Fan with motor of A.C. Permanent insulation
capacitor rating confirming BEE 5 Star rating and IS:374/79 and
also comply with IS:1709/1984 with latest amendment. The
rated volage 220/240 volts, 50 Hz, 1-ph [Link] fan assemble
should consists of down rod blades, shackle canopies etc and
with double ball bearing system.
(i) BEE 5 Star rated-1200mm sweep Each 4 1800.00 7200.00
10 701 Supply and burying of 40mm dia x 4.5 metres long G.I. pipe,
vertically for earthing having 12mm dia. holes spaced 75mm
apart drilled up to 2 metre from the bottom complete with
earthing lead of No.6 to 8SWG [Link] in G.I. pipe upto appron
(and from apron to switch board the cost of G.I. pipe and G.I.
wire will be extra) upto switch board, 30cm. square [Link] with
hinged cover, masonary housing, alternate layers/of charcoal/
coke and salt at least 150mm thick alround etc. complete in all
respects.
Each 0 4076.00 0.00
11 716 Supplying & Laying of 25mmx3mm G.I. Strip from earth
electrode in ground as required complete in all respects. Metre 15 90.00 1350.00
12 723 Supply & fixing of two number 8 SWG G.I. wire for earthing
purpose as required complete in all respects. Metre 15 210.00 3150.00
13 Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve
a) 1002 6 - 32 [Link]. A Each 0 260.00 0.00
14 Supply and fixing of 6 Amp to 32 Amp DP MCB(10KA)C
Curve
a) 1009 25 Amp. DP MCB(10KA) C Curve-Cat. A Each 0 740.00 0.00
15 Construction of recess distribution board of all sizes including
cutting of brick work providing lintel of suitable size &
thickness plastering etc. with supply of all materials, labours, T
& P etc. required for proper completion of work.
a) 1141A 480x480x200 mm. size Each 0 525.00 0.00
16 Supply and fixing of factory fabricated M.S. box in existing sunk
with Godrej type almirah cover with handle etc. fabricated from
18 SWG M.S. sheet duly painted with red oxide primer followed
by two coats of synthetic enamel paint complete with necessary
conduit entry and DP/TPN; fixing arrangement and provision for
compartment for loose wires, openable housing on the top and
hold fast etc. including supply of all material, labour and T & P
etc. required for proper completion of the work.
a) 1148 400x480x200 mm. size Each 0 1500.00 0.00
17 Supply and fixing of flush/surface mounting distribution boards
with additional metal door without MCB complete in all
respects.
a) 1022(A) 4 Way SPN Cat. A Each 0 1590.00 0.00
18 1129 Supply & fixing of Crimping, solder, less, copper ton
electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm
to 6sqmm cables, including tapping with insulating tape, etc.
complete in all respects.
Each 32 15.00 480.00
19 1139(A) Supply and fixing of power plug with 20A/250 V flush type
modular switch and 5 Pin 20 A/250 Volt flush type universal
modular socket switch on concealed M.S. box including supply
of all material, labour T & P etc required for proper completion
of work.
Each 0 625.00 0.00
20 1116 Erection and testing of ceiling fan and regulator for room height
upto 3.5mts. including supply of 3mm thick G.I. down rod
19mm dia duly painted, complete in all respects. Each 4 140.00 560.00
21 1120 Erection and testing exhaust fan on the exhisting hole with
suitable size of rag bolts nuts and washers etc. complete in all
respects. Each 0 195.00 0.00
22 1122 Supply & fixing of 16 gauge [Link] duly painted including
making hole in the wall for exhaust fan and finishing properly
etc. complete as required. Each 0 810.00 0.00
23 1149 Supply & fixing hexagonal/Round G.P. Fan box of approved
make made up of 1.0 mm thick ISI marked G.P. Sheet spot
welded four to Eight holes of 25.4mm for pipe entry of the box.
Holes should be semi-shuttered type with 0.5mm G.P. Sheet
made upper & lower cover duly screwed fitted with 300mm
round zink coated M.S. Bar x 12mm & brand name should be
embossed. Fixing with wiring conduit laid in the R.C.C. roof
before concreting alongwith supply of all material labour, T & P
etc required for proper completion of the work.
Each 4 150.00 600.00
24 1203(C) Supply fixing of electronic fan regulator (Modular) 120-280
V. ISI marked, on the existing switch board including making
connetion, required material, labour T/P etc for proper
completion of work to the satisfaction of Engineer in charge of
work.
Each 4 517.00 2068.00
CABLES
25 Supply and laying of aluminium conducter, PVC insulated
armoured, served, sheeted cable 1000 bolts grade at a depth of
750mm below ground level over a cushion of 75mm thick sand
alround and protected with burnt bricks on sides and top on
surface, the cable run shall be fixed on M.S. clamps etc. of
suitable size. or as directed by the Engineer-Incharge, complete
in all respect. the armouring of the cable shall be properly
connected with the earth conductor by clamps etc.
501
501(a) 6 sqmm 2 core Metre 20 276.00 5520.00
TOTAL (SCHEDULED ITEMS) 42400.00
PART (B): SCHEDULE ITEMS (AS PER DSR. E&M 2018)
26 1.18 Supplying and drawing following pair 0.5 sqmm FR PVC
insulated annealed copper conductor, unarmoured telephone
cable in the existing surface/recessed steel/PVC conduit as
required.
1.18.2 2 Pair Metre 12 20.00 240.00
27 1.24 Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc as required.
1.24.6 Telephone socket outlet Each 0 119.00 0.00
1.24.7 TV antenna socket outlet Each 0 119.00 0.00
28 1.22 Supplying and fixing metal box of following sizes (nominal size)
on surface or in recess with suitable size of phenolic laminated
sheet cover in front including painting etc as required.
1.22.1 75mm X 75 mm X 60mm Deep Each 0 140.00 0.00
29 1.27 Supplying and fixing following size/modules, GI box along with
modular base & cover plate for modular switches in recess etc
as required.
1.27.1 1 or 2 Module (75mm X 75 mm) Each 0 243.00 0.00
30 1.51 Extra for fixing the louvers / shutters complete with frame fro
exhaust fans of all sizes.
Each 0 168.00 0.00
31 14.13 Providing, laying and fixing following dia G.I. pipe (medium
class) in ground complete with G.I. fittings including trenching
(75 cm deep) and refilling etc as required.
14.13.1 50 mm Dia Metre 15 536.00 8040.00
32 1.49 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as
required. Each 12 48.00 576.00
TOTAL (SCHEDULED ITEMS-DSR-2018) 8856.00
TOTAL (SCHEDULED ITEMS-DSR-2018) 7390.33
PART C - NON - SCHEDULED ITEMS (AS PER
MARKET RATES )
33 Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans
including providing nuts, bolts, mounting frame and other
accessories including connections etc. complete as required-
Make: USHA Cat No. TURBO JET DLX
a) N.S 300mm sweep. Each 0 1470.00 0.00
TOTAL NON SCHEDULED ITMES 0.00
COST SUMMARY
(ELECTRICAL WORKS
TOTAL (SCHEDULED ITEMS) 42400.00
TOTAL (SCHEDULED ITEMS- DSR ) 7390.33
TOTAL (NON-SCHEDULED ITEMS) 0.00
TOTAL (SCHEDULED + NON-SCHEDULED ITEMS) 49790.33
SAY 49790.33
DETAILED MEASUREMENTS OF PROPOSED TOILET BLOCK
AT NAGAR NIGAM, DISTRICT -PRAYAGRAJ(U.P.)
ABSTRACT OF COST
(AS PER D.S.R.- 2021*0.735 & APPLICABLE COST INDEX-107 FOR PRAYAGRAJ)
S.N. DESCRIPTION OF ITEM SCH. NO. QUANTITY UNIT DSR RATES (DSR *0.8345) AMOUNT AMOUNT
SCHEDULED M.R.
1 Earth work in excavation by mechanical means
(Hydraulic excavator)/manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as well as 10
sqm on plan) including getting out and disposal of
excavated earth lead upto 50 m and lift upto 1.5 m, as
directed by [Link] kinds of soil
D.S.R.-2.6.1
(i) 0.00 to 1.50 Mtr. 9.352 CUM 205.45 171.45 1603.44
0.00
1a. Filling available excavated earth (excluding rock) in
trenches, plinth,sides of foundations etc. in layers not
exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift
upto 1.5 m.
(D.S.R.-2.25) 6.547 CUM 253.95 211.92 1387.37
0.00
0.00
2 Excavating, supplying and filling of local earth
(including royalty) by mechanical transport upto a lead
of 5km also including ramming and watering of the earth
in layers not exceeding 20 cm in trenches, plinth, sides of
foundation etc. complete.
(D.S.R.-2.25a) 3.823 CUM 368.65 307.64 1176.08
0.00
3 Providing and laying in position cement concrete of
specified grade excluding the cost of centering and
shuttering - All work up to plinth level :1:4:8 (1
Cement : 4 coarse sand : 8 graded stone aggregate 40
mm nominal size)
(D.S.R.-4.1.8) 3.340 CUM 6326.05 5279.09 17632.16
0.00
4 Supplying and filling in plinth with sand under floors,
including watering, ramming, consolidating and dressing
complete. (D.S.R.-2.27) 6.629 CUM 2161.20 1803.52 11954.91
0.00
5 Treatment of soil under existing floors using chemical
emulsion @ one litre per hole, 300 mm apart including
drilling 12 mm diameter holes and plugging with
cement mortar 1:2 (1 cement:2 coarse sand) to match the
existing floor.
0.00
With Chlorpyriphos/ Linadane E.C. 20% with 1%
concentration. (D.S.R.-[Link]) 0.000 SQM 256.15 213.76 0.00
0.00
6 Reinforced cement concrete work in beams, suspended
floors, roofs having slope up to 15° landings, balconies,
shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases above plinth level up to
floor five level, excluding the cost of centering,
shuttering,finishing and reinforcement with 1:1.5:3 (1
cement : 1.5 coarse sand(zone-III) derived from natural
sources : 3 graded stone aggregate 20 mm nominal size
derived from natural sources).
(D.S.R.-5.3) 0.00
(a) Ground Floor 0.279 CUM 10719.30 8945.26 2499.75
0.00
7 As in item no. 6 above but for slabs (Using 1:1.5:3 Mix
concrete). (D.S.R.-5.3) 0.00
(a) Ground Floor 7.194 CUM 10719.30 8945.26 64354.18
0.00
8 As in item 6 but for the lighter beams i.e. having spans
upto 6 m. (D.S.R.-5.3) 0.00
(a) Ground Floor 4.145 CUM 10719.30 8945.26 37075.40
0.00
9 As in item 6 above but in R.C.C. Raft foundation and
footing with approved stone ballast. (Using 1:1.5:3
Mix concrete) (D.S.R.-5.1.2) 0.00
4.104 CUM 8364.20 6979.92 28645.61
9a. Boring with hydraulic piling rigs with power units,
providing and installing cast in situ single under reamed
piles of specified diameter and length below pile cap in
M-25 cement concrete, to carry a safe working load not
less than specified, excluding the cost of steel
reinforcement but including the cost of boring with
bentonite solution and the length of the pile to be
embedded in pile cap etc. all complete. (Length of pile
for payment shall be measured upto to the bottom of pile
cap) :300 mm dia piles
D.S.R.-20.3.1 72.00 RM 2560.90 2137.07 153869.12
0.00
10 Reinforced cement concrete work in walls (any
thickness), including attached pilasters, buttresses, plinth
and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. above plinth level up to
floor five level, excluding cost of centering, shuttering,
finishing and reinforcement :
(D.S.R.-5.2.2) 0.00
(a) Ground Floor 2.484 CUM 10185.05 8499.42 21112.57
0.00
11 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in foundation
and plinth in:Cement mortar 1:6 (1 cement : 6 coarse
sand)
(D.S.R.-6.1.2) 4.363 CUM 6658.25 5556.31 24241.46
0.00
12 Providing and laying damp-proof course 40 mm thick
with cement concrete [Link] (1 cement : 2 coarse sand : 4
graded stone aggregate 12.5 mm nominal size).
(DSR-4.10) 0.000 SQM 370.85 309.47 0.00
0.00
13 Painting on D.P.C. with two coats of airblown
bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx. including
cost of fuel if any. (DSR-4.13) 0.000 SQM 113.85 95.01 0.00
0.00
14 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in superstructure
above plinth level up to floor V level in all shapes and
sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
(D.S.R.-6.4.2) 0.00
(a) Ground Floor 12.925 CUM 8288.35 6916.63 89397.76
0.00
15 Half brick masonry with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in superstructure
above plinth level up to floor V [Link] mortar 1:4
(1 cement :4 coarse sand)
(D.S.R.-6.13.2) 0.00
(a) Ground Floor 9.135 SQM 1018.05 849.56 7760.76
0.00
16 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and
binding all complete upto plinth [Link]-
Mechanically Treated bars of grade Fe-500D or more.
(D.S.R.-5.22.6) 0.00
(a) Ground Floor 21.583 QTL 8965.00 7481.29 161465.99
0.00
17 15 mm cement plaster on rough side of single or half
brick wall of mix : 1:4 (1 cement: 4 coarse sand).
(DSR-13.5.1) 57.620 SQM 354.50 295.83 17045.81
0.00
18 15 mm cement plaster on rough side of single or half
brick wall of mix:1:6 (1 cement: 6 coarse sand) (DSR-13.5.2) 0.00
(a) Ground Floor 79.035 SQM 339.10 282.98 22365.24
0.00
19 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse
sand) (DSR-13.4.2) 0.00
(a) Ground Floor 24.747 SQM 294.35 245.64 6078.69
0.00
20 Add for plaster drip course/ groove in plastered surface
or moulding to R.C.C. projections. (DSR-5.30) 31.850 RM 64.70 53.99 1719.65
0.00
21 Providing and fixing 18mm thick gang saw cut mirror
polished premoulded and prepolished) machine cut for
kitchen platforms, vanity counters, window sills , facias
and similar locations of required size of approved shade,
colour and texture laid over 20mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand) with joints treated
with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete
at all levels. Granite of any colour and shade.
(FLOORING)
(DSR-[Link] ) 0.00
(a) Ground Floor 9.439 SQM 4425.35 3692.95 34858.54
0.00
22 Providing and fixing 18mm thick gang saw cut mirror
polished premoulded and prepolished) machine cut for
kitchen platforms, vanity counters, window sills , facias
and similar locations of required size of approved shade,
colour and texture laid over 20mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand) with joints treated
with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete
at all levels. Granite of any colour and shade. (skirting)
(DSR-[Link] ) 0.00
(a) Ground Floor 3.769 SQM 4425.35 3692.95 13919.12
0.00
24' Providing edge moulding to 18 mm thick marble stone
counters, Vanities etc., including machine polishing to
edge to give high gloss finish etc. complete as per design
approved by [Link] work
DSR-8.3.2 5.100 SQM 418.45 349.20 1780.90
0.00
23 Providing and laying Ceramic glazed floor tiles of size
300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS : 15622 of
approved make in colours such as White, Ivory, Grey,
Fume Red Brown, laid on 20 mm thick cement mortar
1:4 (1 Cement : 4 Coarse sand), Jointing with grey
cement slurry @ 3.3 kg/sqm including pointing the joints
with white cement and matching pigment etc., complete.
(FLOORING)
(D.S.R.-11.37) 0.00
(a) Ground Floor 68.563 SQM 935.60 780.76 53531.22
0.00
24 Making plinth protection 50mm thick of cement concrete
[Link] (1 cement : 3 coarse sand (zone-III) derived from
natural sources : 6 graded stone aggregate 20 mm
nominal size derived from natural sources) over 75mm
thick bed of dry brick ballast 40 mm nominal size, well
rammed and consolidated and grouted with fine sand,
including necessary excavation, levelling & dressing &
finishing the top smooth
(DSR-4.17) 2.233 SQM 681.65 568.84 1270.16
0.00
25 Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st class
hard wood and well matched commercial 3 ply veneering
with vertical grains or cross bands and face veneers on
both faces of shutters: (Both side laminated)
0.00
(a) 35 mm thick including ISI marked Stainless Steel
butt hinges with necessary screws. Single leaf. ((DSR-9.21.1) 8.505 SQM 2015.75 1682.14 14306.63
(b) Double leaf (DSR-
9.21.1+9.26) 0.000 SQM 2109.40 1760.29 0.00
0.00
26 Providing and fixing factory made uPVC white colour
sliding glazed window upto 1.50 m in height dimension
comprising of uPVC multi-chambered frame with in-
built roller track and sash extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick galvanized mild
steel section made from roll forming process of required
length (shape & size according to uPVC profile),
appropriate dimension of uPVC extruded glazing beads
and uPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (white powder coated) touch locks with hook,
zinc alloy body with single nylon rollers (weight bearing
capacity to be 40 kg), G.I fasteners 100 x 8 mm size for
fixing frame to finished wall and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut
and fusion welded at all corners,
0.00
including drilling of holes for fixing hardware's and
drainage of water etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required
size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge.
(Single / double glass panes, wire mesh and silicon
sealent shall be paid separately). Variation in profile
dimension in higher side shall be accepted but no extra
payment on this account shall be [Link]: For uPVC
frame and sash extruded profiles minus 5% tolerance
in dimension i.e. in depth & width of profile shall be
acceptable.
0.00
Three track three panels sliding window with two glazed
& one wire mesh panels with alluminium channel for
roller track, wool pile, nylon rollers with s.s. 304 body.
0.00
Using R2 series with foame (70mm & above)x(40 mm &
above) & both glazed and fly screen sash (25 mm &
above)x(50mm & above with zinc alloy (zamak) powder
coated touch lock with hook (Height up to 1.20 meter)
D.S.R.-9.147 A4.1 0.810 SQM 10347.05 8634.61 6994.04
0.00
Providing and fixing factory made door frame (single
rebate) made out of single piece extruded solid PVC
foam profile with homogenous fine cellular structure
having smooth outer integral skin having 62 mm width
& 32 mm thickness, frame will be mitred & Jointed with
self driven self tapping screws of size 38 mm x 4 mm &
27 PVC solvent cement, including fixing the frame to wall
with suitable dia & length anchor fastener as per
manufacturer's specification and irection of Engineer-in-
charge.
D.S.R.-9.123 29.100 RM 481.85 402.10 11701.22
0.00
28 Painting with silicon & acrylic emulsion based water
thinnable sealer of approved brand and manufacture on
wet or patchy portion of plastered surfaces : Two coat
D.S.R. 13.51.2 0.00
(a) Ground Floor 54.945 SQM 132.65 110.70 6082.17
0.00
29 Finishing walls with Premium Acrylic Smooth exterior
paint with Silicone additives of required shade:New
work (Two or more coats applied @ 1.43 ltr/10 sqm over
and including priming coat of exterior primer applied @
2.20 kg/10 sqm)(Outer surface)
(DSR-13.47.1) 0.00
(a) Ground Floor 54.945 SQM 162.35 135.48 7443.95
0.00
30 Painting with silicon & acrylic emulsion based water
thinnable sealer of approved brand and manufacture on
wet or patchy portion of plastered surfaces : Two coat
D.S.R. 13.51.2 0.00
(a) Ground Floor 51.441 SQM 132.65 110.70 5694.28
0.00
31 Providing and applying white cement based putty of
average thickness 1 mm, of approved brand and
manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete.
D.S.R.-13.80 0.00
(a) Ground Floor 161.330 SQM 123.85 103.35 16673.87
0.00
32 Providing and fixing 150 mm bright finished floor brass
door stopper with rubber cushion, necessary brass screws
etc. to suit shutter thickness complete. (DSR- 14.34) 5.000 NOS. 233.10 194.52 972.61
0.00
33 Providing & fixing Stainless steel sliding door bolts ISI
marked anodised (anodic coating not less than grade AC
10 as per IS : 1868) transparent or dyed to required
colour or shade with nuts and screws etc complete. (a)
250mm x 16mm .
(M.R.) 5.000 NOS 902.00 4510.00
34 Providing and fixing stainless steel towerbolts (barrel
type) with necessary screws etc. complete
(a) 300 mm x 10mm (M.R.) 5.000 NOS 504.00 2520.00
(b) 250 mm x 10mm (M.R.) 5.000 NOS 420.00 2100.00
35 Providing and fixing stainless steel handles with screws
etc. complete (a) 125 mm (M.R.) 10.000 NOS 295.00 2950.00
36 Providing and laying integral cement based water
proofing treatment including preparation of surface as
required for treatment of roofs, balconies, terraces etc
consisting of following operations: a) Applying a slurry
coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the
RCC slab including adjoining walls upto 300 mm height
including cleaning the surface before treatment. b)
Laying brick bats with mortar using broken bricks/brick
bats 25 mm to 115 mm size with 50% of cement mortar
1:5 (1 cement : 5 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge over 20 mm thick layer
of cement mortar of mix 1:5 (1 cement :5 coarse sand )
admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge to
required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of
walls and slabs c) After two days of proper curing
applying a second coat of cement slurry using 2.75 kg/
sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-
charge. d) Finishing the surface with 20 mm thick
jointless cement mortar of mix 1:4 (1 cement :4 coarse
sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-
charge including laying glass fibre cloth of approved
quality in top layer of plaster and finally finishing the
surface with trowel with neat cement slurry and making
pattern of 300x300 mm square 3 mm deep. e) The whole
terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final
test. All above operations to be done in order and as
directed and specified by the Engineer-in-Charge : With
average thickness of 120 mm and minimum thickness at
khurra as 65 mm.
(DSR-22.7.1) 59.000 SQM 1522.95 1270.90 74983.20
0.00
37 Providing & fixing glass panes with putty and glazing
clips in steel doors, windows, clerestory windows, all
complete with : 4 mm thick (DSR-10.30.1) 1.620 SQM 940.30 784.68 1271.18
0.00
38 Chequerred precast cement concrete tiles 22 mm thick in
footpath & courtyard, jointed with neat cement slurry
mixed with pigment to match the shade of tiles,
including rubbing and cleaning etc. complete, on 20 mm
thick bed of cement mortar 1:4 (1 cement: 4 coarse
sand). Ordinary cement without any pigment
(DSR-11.20.4) 2.100 SQM 928.50 774.83 1627.15
0.00
39 Providing and fixing stainless steel ( Grade 304) railing
made of Hollow tubes, channels, plates etc., including
welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c
fixing the railing with necessary accessories & stainless
steel dash fasteners , stainless steel bolts etc., of required
size, on the top of the floor or the side of waist slab with
suitable arrangement as per approval of Engineer-in-
charge.
(DSR-10.28) 16.200 KG 612.25 510.92 8276.95
0.00
40 Providing and fixing double scaffolding system (cup
lock type) on the exterior side, up to seven story height
made with 40 mm dia M.S. tube 1.5 m centre to centre,
horizontal & vertical tubes joining with cup & lock
system with M.S. tubes, M.S. tube challies, M.S. clamps
and M.S. staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable
condition for the required duration as approved and
removing it there after .The scaffolding system shall be
stiffened with bracings, runners, connection with the
building etc wherever required for inspection of work at
required locations with essential safety features for the
workmen etc. complete as per directions and approval of
Engineerin- charge .The elevational area of the
scaffolding shall be measured for payment purpose .The
payment will be made once irrespective of duration of
scaffolding.
(DSR-14.72) 54.945 SQM 285.00 237.83 13067.60
0.00
41 Stone work (machine cut edges) for wall lining etc.
(veneer work) upto 10 metre height, backing filled with a
grout of average 12 mm thick cement mortar 1:3 (1
cement : 3 coarse sand) including pointing in white
cement mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment matching the stone shade : (To
be secured to the backing and the sides by means of
cramps and pins which shall be paid for separately) :Red
sand stone - exposed face fine dressed with rough
backing.50 mm thick
D.S.R.-[Link] 55.980 SQM 4527.650 3778.32 211510.57
0.00
42 Providing and fixing stainless steel cramps of required
size and shape for anchoring stone wall lining to the
backing or securing adjacent stones in stone wall lining
in cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases in stone and holes
in walls
wherever required.
D.S.R.-8.15 55.980 KG 624.950 521.52 29194.73
0.00
43 Providing and fixing copper pins 7.5 cm long 6 mm
diameter for securing adjacent stones in stone wall lining
in cement mortar 1:2 (1 cement : 2 coarse sand),
including making the necessary chases.
D.S.R.-8.16 111.960 EACH 37.600 31.38 3512.99
44 Cost of carving work (As per Quotation) MR 8.397 SQM 12418.000 104273.946
45 Centring and shuttering including strutting,
propping etc. and removal of form for: as per DSR-
2023, clause 5.9
Foundations, footings, bases of columns, etc. for
mass concrete. As per DSR-2023, clause 5.9.1 D.S.R.-5.9.1 28.750 SQM 307.95 256.98 7388.30
Lintels, beams, plinth beams, girders, bressumers
and cantilevers. As per DSR-2023 clause, 5.9.5 D.S.R.-5.9.5 10.362 SQM 608.35 507.67 5260.33
Columns, Pillars, Piers, Abutments, Posts and
Struts as per DSR-2023, clause 5.9.6 D.S.R.-5.9.6 41.400 SQM 804.25 671.15 27785.47
46 Cost of Plumbing work (As per detailed attached) 165683.00
47 Cost of Electrical work (As per detailed attached) 113514.00
48 Cost of SEPTIC TANK (As per detailed attached) 158668.00
TOTAL 1230493.13 554218.95
TOTAL 1784712.08
G. TOTAL 1784712.08
Say Rs. 17.85 Lacs.
DETAILED MEASUREMENTS OF PROPOSED TOILET BLOCK
AT NAGAR NIGAM, DISTRICT -PRAYAGRAJ(U.P.)
DETAILES OF MEASUREMENT
[Link]. DESCRIPTION OF ITEM NO. L B H QTY UNIT
1 Earth work in excavation
UNDER FOOTING
GP1 (2P1) 8 1.625 0.800 0.700 7.280
OUTER
TB1 3 2.775 0.200 0.350 0.583
TB2 2 2.260 0.200 0.350 0.316
TB3 2 2.800 0.200 0.350 0.392
TB4 2 1.050 0.200 0.350 0.147
TB5 3 1.350 0.200 0.350 0.284
TB6 2 0.980 0.200 0.350 0.137
TB7 1 3.050 0.200 0.350 0.214
TOTAL 9.352 CUM
1a. Filling of available earth
Same as item no.1*70% 6.547 CUM
2 Filling of carted earth
AVAILABLE EARTH 30% OF ITEM NO. 1 -2.806
TOILET FEMALE & MALE 1 5.500 2.900 0.350 5.583
1 3.050 0.980 0.350 1.046
TOTAL 3.823 CUM
3 Base concrete ([Link])
UNDER FOOTING
GP1 (2P1) 8 1.525 0.700 0.100 0.854
OUTER
TB1 3 2.775 0.200 0.100 0.167
TB2 2 2.260 0.200 0.100 0.090
TB3 2 2.800 0.200 0.100 0.112
TB4 2 1.050 0.200 0.100 0.042
TB5 3 1.350 0.200 0.100 0.081
TB6 2 0.980 0.200 0.100 0.039
TB7 1 3.050 0.200 0.100 0.061
UNDER FLOOR
TOILET FEMALE & MALE 1 5.500 2.900 0.100 1.595
1 3.050 0.980 0.100 0.299
TOTAL 3.340 CUM
4 Sand filling under floor
UNDER FLOOR
TOILET FEMALE & MALE 1 5.500 2.900 0.350 5.583
1 3.050 0.980 0.350 1.046
TOTAL 6.629 CUM
5 Anti-termite treatment 0.000
TOTAL 0.000 SQM
6 R.C.C. work in Lintel
LINTEL
D1 2 1.300 0.230 0.150 0.090
D2 3 1.100 0.230 0.150 0.114
V1 2 1.100 0.230 0.150 0.076
TOTAL 0.279 CUM
7 R.C.C. work in slab
SLAB
1 5.950 3.370 0.150 3.008
1 3.600 2.800 0.150 1.512
PLATFORM
FEMALE & MALE TOILET 2 1.500 0.600 0.075 0.135
PROJECTION AT LINTEL LVL.
2 6.550 0.300 0.100 0.393
2 3.975 0.300 0.100 0.239
2 1.580 0.450 0.100 0.142
PROJECTION AT SLAB LVL.
2 6.850 0.450 0.150 0.925
2 4.500 0.450 0.150 0.607
2 1.730 0.450 0.150 0.234
TOTAL 7.194 CUM
8 R.C.C. work in beams
TIE BEAMS
TB1 3 2.775 0.200 0.350 0.583
TB2 2 2.260 0.200 0.350 0.316
TB3 2 2.800 0.200 0.350 0.392
TB4 2 1.050 0.200 0.350 0.147
TB5 3 1.350 0.200 0.350 0.284
TB6 2 0.980 0.200 0.350 0.137
TB7 1 3.050 0.200 0.350 0.214
BEAM
B1 3 2.775 0.200 0.350 0.583
B2 2 2.260 0.200 0.350 0.316
B3 2 2.800 0.200 0.350 0.392
B4 2 1.050 0.200 0.350 0.147
B5 3 1.350 0.200 0.350 0.284
B6 2 0.980 0.200 0.350 0.137
B7 1 3.050 0.200 0.350 0.214
TOTAL 4.145 CUM
9 R.C.C. work in Raft foundation
GP1 (2P1) 8 1.425 0.600 0.600 4.104
TOTAL 4.104 CUM
9a. Pile work
300 mm dia pile
P1 16 4.500 72.000 RM
P1
16*0.25*3.14*0.300*0.300*4.5 5.087
TOTAL 5.087 CUM
10 R.C.C. Column
(a) Ground Floor
C1 8 0.300 0.300 3.450 2.484
TOTAL 2.484 CUM
11 B/W In foundation
OUTER
2 5.955 0.230 0.150 0.411
2 5.955 0.345 0.300 1.233
4 3.375 0.230 0.150 0.466
4 3.375 0.345 0.300 1.397
1 3.645 0.230 0.150 0.126
1 3.645 0.345 0.300 0.377
2 1.280 0.230 0.150 0.088
2 1.280 0.345 0.300 0.265
TOTAL 4.363 CUM
12 D.P.C.(40 mm.)
TOTAL 0.000 SQM
DEDUCTION (-)
TOTAL 0.000 SQM
TOTAL 0.000 SQM
13 Painting on D.P.C. TOTAL 0.000 SQM
14 B/W In Superstructure (230 MM Thick)
2 5.055 0.230 3.000 6.976
2 2.775 0.230 3.000 3.830
2 0.980 0.230 3.000 1.352
1 3.045 0.230 3.000 2.101
step 2 1.050 0.150 0.300 0.095
TOTAL 14.353 CUM
DEDUCTION (-)
D1 2 0.900 0.230 2.550 1.056
V 2 0.900 0.230 0.900 0.373
TOTAL 1.428 CUM
G. TOTAL 12.925 CUM
15 B/W In Superstructure (115 mm thick)
W.C 2 1.050 0.115 2.100 0.507
3 1.500 0.115 2.100 1.087
TOTAL 1.594 CUM
DEDUCTION (-)
D2 3 0.750 0.115 2.100 0.543
TOTAL 0.543 CUM
TOTAL 1.051 CUM
9.135 SQM
16 M. S. work in R.C.C.
(a) Ground Floor
qty same as item no (6a)*.5*0.785 (Lintel) 0.110
qty same as item no (7a)*1.00*0.785 (Slab) 5.647
qty same as item no (8a)*1.5*0.785 (Beam) 4.880
qty same as item no (9)*1.25*0.785 (footing) 4.027
qty same as item no (9a)*1*0.785 (Pile) 3.993
qty same as item no (10a)*1.5*0.785 (Column) 2.925
TOTAL 21.583 QTL
17 15mm cement plaster (Interior surface)
OUTER SIDE
OUTER 2 5.955 3.000 35.730
2 3.375 3.000 20.250
1 3.645 0.450 1.640
TOTAL 57.620 SQM
DEDUCTION (-)
V 2 0.900 0.900 1.620
D1 2 0.900 0.230 2.550 1.056
TOTAL 2.676 CUM
[Link] 54.945 CUM
18 15 mm cement plaster (Interior surface)
INNER SIDE
4 2.300 3.000 27.600
3 3.375 3.000 30.375
4 1.050 3.000 12.600
6 1.500 3.000 27.000
TOTAL 97.575 SQM
DEDUCTION (-)
D1 6 0.900 2.550 13.770
V 2 0.900 0.900 1.620
D2 2 0.750 2.100 3.150
TOTAL 18.540 SQM
NET TOTAL 79.035 SQM
19 12 mm Thick plaster (outer side)
TERRACE PARAPET 1 5.950 3.375 20.081
1 3.645 1.280 4.666
TOTAL 24.747 SQM
20 Making grooves.
2 5.950 11.900
2 3.375 6.750
4 1.050 4.200
6 1.500 9.000
TOTAL 31.850 RM
21 Granite Flooring
VER.
1 3.840 1.130 4.339
PLATFORM
FEMALE & MALE TOILET 2 2.750 0.600 3.300
STEPS
TREAD 3 1.2 0.300 1.080
RISER 4 1.2 0.150 0.720
TOTAL 9.439 SQM
22 Granite Skirting
VER.
1 2.470 1.280 3.162
PLATFORM
FEMALE & MALE TOILET 2 1.500 0.150 0.450
STEPS
TREAD 2 0.3 0.150 0.090
RISER 3 0.15 0.150 0.067
TOTAL 3.769 SQM
24' Moulding in Steps & Plateform
PLATFORM
FEMALE & MALE TOILET 2 1.500 3.000
STEPS
TREAD 2 1.05 2.100
TOTAL 5.100 RM
23 Ceremic wall tiles
FLOORING
1 5.955 3.375 20.098
WALL TILES
W.C 4 1.050 1.500 6.300
6 1.500 1.500 13.500
2 5.955 1.500 17.865
4 3.375 1.500 20.250
TOTAL 78.013 SQM
DEDUCTION (-)
D2 6 0.750 1.500 6.750
D1 2 0.900 1.500 2.700
TOTAL 9.450 SQM
TOTAL 68.563 SQM
24 25 mm thick C.C. apron
APRON 2 7.750 0.900 0.100 1.395
2 3.375 0.900 0.100 0.608
2 1.280 0.900 0.100 0.230
TOTAL 2.233 SQM
25 35mm thick Flush doors
(a) Single Leaf
D1 2 0.900 2.100 3.780
D2 3 0.750 2.100 4.725
TOTAL 8.505 SQM
(b) Extra for double leaf shutters
TOTAL 0.000 SQM
26 U-PVC Window
V 2 0.900 0.450 0.810
TOTAL 0.810 SQM
27 PVC Door Chaukhat.
D1 2 6.000 12.000
D2 3 5.700 17.100
TOTAL 29.100 RM
28 Plastic emulsion Paint (Inner walls)
(a) Ground Floor (Same as Inside plaster) TOTAL 54.945 SQM
29 Painting of exterior surface with Acrylic paint
(a) Ground Floor (Same as outer plaster) TOTAL 54.945 SQM
30 Plastic emulsion Paint (Ceiling)
SLAB
1 5.950 3.370 20.052
1 3.600 2.800 10.080
PLATFORM 0.000
FEMALE & MALE TOILET 2 1.500 0.600 1.800
PROJECTION AT LINTEL LVL. 0.000
2 6.550 0.300 3.930
2 3.975 0.300 2.385
2 1.580 0.450 1.422
PROJECTION AT SLAB LVL. 0.000
2 6.850 0.450 6.165
2 4.500 0.450 4.050
2 1.730 0.450 1.557
TOTAL 51.441 SQM
31 Birla putty base.
(a) Ground Floor (Same as inner+outer +ceiling plaster) TOTAL 161.330 SQM
32 Door Stopper TOTAL 5.000 NOS.
33 Sliding bolt.
250 x 16mm TOTAL 5.000 NOS
34 Tower bolt
(a) 250 x 10mm TOTAL 5.000 NOS
(b) 200 x 10mm TOTAL 5.000 NOS
35 Handle (125mm)
(a) 125mm TOTAL 10.000 NOS
36 Brick coba treatment
TEARRACE 1 11.800 5.000 59.000
TOTAL 59.000 SQM
37 Glass panes
D1 2 0.900 0.450 0.810
V1 2 0.900 0.450 0.810
TOTAL 1.620 SQM
38 P/L of Chequered tiles
1 2.000 1.050 2.100
TOTAL 2.100 SQM
39 S.S. Railing
1 2.000 0.900 1.800 SQM
9 Kg. PER SQM. 1 9.000 1.800 16.200
TOTAL 16.200 Kg.
40 Scaffolding work
Same as item 31(a) TOTAL 54.945 SQM
41 Red Sand stone cladding
2 5.955 3.000 35.730
2 3.375 3.000 20.250
TOTAL 55.980 SQM
42 Cramps
TOTAL 55.980 KG
43 Pin 112 NOS.
44 Carving Work
2 5.955 0.450 5.360
2 3.375 0.450 3.038
TOTAL 8.397 SQM
CENTERING AND SHUTTERING INCLUDING
STRUTTING, PROPPING ETC. AND
REMOVAL OF FORM FOR:
45
A FOUNDATION
PCC
2 Pile Group 20 1.525 0.100 3.050 Sqm
20 0.700 0.100 1.400 Sqm
RCC
2 Pile Group 20 1.425 0.600 17.100 Sqm
20 0.600 0.600 7.200 Sqm
G-total 28.750 Sqm
B BEAM
B1 3 2.775 0.350 2.914 Sqm
B2 2 2.260 0.350 1.582 Sqm
B3 2 2.800 0.350 1.960 Sqm
B4 2 1.050 0.350 0.735 Sqm
B5 3 1.350 0.350 1.418 Sqm
B6 2 0.980 0.350 0.686 Sqm
B7 1 3.050 0.350 1.068 Sqm
G-total 10.362 Sqm
C COLUMN
C1 40 0.300 3.450 41.400 Sqm
G-total 41.400 Sqm
46 Plumbing Work 1.000 JOB
47 Electrical Work 1.000 JOB
DETAILS OF MEASUREMENTS SEPTIC TANK
[Link]. DESCRIPTION OF ITEM NO. L(m) B (M) H(M) QTY UNIT
Septic Tank(Size :- Length = 5.0 M. Width = 2.00M Total Depth =3.00M)
A SEPTIC TANK & SOAK PIT
1 EARTH WORK IN EXCAVATION IN FOUNDATION 5.460 2.460 1.500 20.147 CUM
5.460 2.460 1.600 21.491 CUM
2 PROVIDING AND LAYING OF CEMENT CONCRETE
IN FOUNDATION (1 :4 :8) 5.460 2.460 0.100 1.343 CUM
3 BRICK WORK WITH BRICK OF CLASS
DESIGNATION 75 IN FOUNDATION 2 5.230 0.230 3.000 7.217
2 2.230 0.230 3.000 3.077
1 2.230 0.230 1.000 0.513
6 0.900 0.230 2.000 2.484
13.292 CUM
4 REINFORCED CEMENT CONCRETE WORK IN SLAB
WITH [Link] 5.460 2.230 0.100 1.218 CUM
5 REINFORCEMENT OF R.C.C. WORK 95.600
SAY 95.600 KG.
6. Shuttering work
7 15MM CEMENT PLASTER OF MIX 1:4 2 5.230 3.000 31.380 SQM.
2 2.230 3.000 13.380
1 2.230 1.000 2.230
6 0.900 2.000 10.800
57.790 SQM.
8 M.S. Foot rest 12.000 NOS.
9 Tee 2.000 NOS.
10 75 mm dia vent pipe 1.000 RM
11 75 mm terminal guard 1.000 NOS.
12 Manhole
M.D. -10- Circular shape 500mm internal diameter 2.000 NOS.
M.D. -2.5- Circular shape 450mm internal diameter 4.000 NOS.
13 Soak pit 1.000 NOS.
SEPTIC TANK
S.N. Description D.S.R. -2023 Qty. Unit Rate (Rs.) Rate*0.83 Amount
45 (Rs.)
ST1 Septic Tank(Size :- Length = 5.0 M. Width =
2.00M Total Depth =3.00M)
1 Earth work in excavation over areas including
disposal of excavated earth, lead upto 50m,
disposed earth to be levelled and neatly dressed.
In all kind of soil upto 1.5m depth DSR.2.6.1 20.147 Cum 205.45 171.45 3454.23
In all kind of soil upto 1.5m to 3.0m. depth DSR.2.17.2 21.491 Cum 169.35 141.32 3037.10
0.00 0.00
2 Providing and laying of cement concrete in base
excluding the cost of centring and shuttering by
[Link] (1 cement : 2 coarse sand : 4 gradded stone
aggregae 20 mm nominal size) DSR.4.1.3 1.34316 Cum 7365.15 6146.22 8255.35
0.00 0.00
3 Brick work with brick of class designation 150 in
foundation and plinth in cement mortar (1 cement :
4 coarse sand) DSR.6.1.1 13.2917 Cum 6882 5743.03 76334.62
0.00 0.00
4 Reinforced cement concrete work in slab with [Link]
(1 cement : 2 course sand : 4 graded stone
aggregate 20mm normal size). DSR.5.1.3 1.21758 Cum 7945.65 6630.64 8073.34
0.00 0.00
5 Reinforcement for R.C.C. work including,
straightening, cutting bending binding and placing
in position complete. DSR.5.22.6 95.6 Kg 89.65 74.81 7152.12
0.00 0.00
6 Centring and shuttering including struting , proping
etc and removal of form for slab. 0.00 0.00
0.00 0.00
7 15 mm cement plaster on rough side of single or
half brick wall mix DSR.13.5.1 57.79 Sqm 354.50 295.83 17096.03
1:3 (1 cement : 3 coarse sand) 0.00 0.00
8 Providing M.S. foot rest including fixing with
20x20x10 cm. cement concrete block [Link] (1
cement : 3 coarse sand : 6 gradded aggregate of
nominal size 20mm ) as per standard design with
20x20mm sq bars. DSR.19.15.1 12 Nos. 461.35 385.00 4619.96
0.00 0.00
9 Providing and fixing C.I. tee at the inlet and outlet
of septic tank. DSR.7087 2 Nos. 570.00 475.67 951.33
0.00 0.00
10 Providing & fixing 75mm dia vent pipes. DSR.[Link] 1 Rm. 931.55 777.38 777.38
0.00 0.00
Providing & fixing of 75mm dia cast iron terminal
11 guard. DSR.[Link] 1 No. 318.25 265.58 265.58
0.00 0.00
12 Providing and fixing in position precast RCC
manhole cover and frame of required shape and
approved quality. 0.00 0.00
M.D. -10- Circular shape 500mm internal diameter
DSR.[Link] 2 No. 1056.65 881.77 1763.55
M.D. -2.5- Circular shape 450mm internal diameter
DSR.[Link] 4 No. 1047.80 874.39 3497.56
0.00 0.00
13 Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft with
bricks of class designation 75 and S.W. drain pipe
100 mm diameter, 1.8m long complete as per
standard design. 0.00 0.00
With F.P.S. bricks DSR.19.32.1 1 No. 28029.15 23390.33 23390.33
TOTAL 158668.47
SAY 158668.00
SCHEDULE OF QUANTITIES FOR PLUMBING WORKS
PROJECT
PROPOSED TOILET BLOCK AT DISTRICT - FATEHPUR (U.P.)
(SCHEDULED ITEMS AS PER D.S.R. 2021)
S.N. Description D.S.R. No. Qty. Unit Rate (Rs.) Rate Amount
(21) *0.8345 (Rs.)
SANITARY FIXTURES & ACCESSORIES : I
1 Providing and fixing water closet squatting pan
(Indian type W.C. pan ) with 100 mm sand cast Iron P
or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all
fittings and fixtures complete, including cutting and
making good the walls and floors wherever required
a) White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests 17.1.1 2 Each 5781.35 4824.54 9649.07
b) Same as above but for European type W.C. pan with
white plastic seat and lid 17.2.1 1 Each 5540.55 4623.59 4623.59
3 Providing and fixing white vitreous china extended
wall mounting water closet of size 780x370x690mm
of approved shape including providing & fixing white
vitreous china cistern with dual flush fitting, of
flushing capacity 3 litre/6 litre (adjustable to 4 litre/8
litres), including seat cover, and cistern fittings, nuts,
bolts and gasket etc complete. Make- Jaguar, Cera or
equivalent
17.78 0 Each 13036.55 10879.00 0.00
2 Providing and fixing wash basin with C.I. brackets, 15
mm C.P. brass pillar taps, 32 mm C.P. brass waste of
standard pattern, including painting of fittings and
brackets, cutting and making good the walls wherever
require
White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap.
17.7.4 4 Each 2731.45 2279.40 9117.58
3 Providing and fixing 600x450 mm beveled edge
mirror of superior glass (of approved quality) complete
with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
17.31 4 Each 1411.15 1177.60 4710.42
4 Providing and fixing white vitreous china flat back
half stall urinal of size 580x380x350 mm with white
PVC automatic flushing cistern, with fittings, standard
size C.P. brass flush pipe, spreaders with unions and
clamps (all in C.P. brass) with waste fitting as per
IS :2556, C.I. trap with outlet grating and other
couplings in C.P. brass including painting of fittings
and brackets, cutting and making good the walls and
floors wherever required
a) Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern 17.5.1 0 Each 10128.30 8452.07 0.00
b) Range of two half stall urinals with 5 litre P.V.C.
automatic flushing cistern 17.5.2 1 Each 15115.40 12613.80 12613.80
5 Providing and fixing stone slab table rubbed, edges
rounded and polished of size 75x50cm deep and 1.8cm
thick fixed in Urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the
stone in the chase with epoxy grout or with cement
concrete [Link] (1cement: 2coarse sand: 4graded stone
aggregate 6mm nominal size) as per direction of
Engineer-in-charge and finished smooth.
8.10
Granite Stone of approved shade 8.10.2 1.00 Sqm. 3542.85 2956.51 2956.51
6 Providing and fixing 8 mm dia C.P./S.S. Jet with
flexible tube upto 1 meter long with S.S. triangular
plate for Eureopean type W.C. of quality and make as
approved by engineer-in-charge.
15mm nominal bore 17.16A 1 Each 299.35 249.81 249.81
7 Providing and fixing CP Brass 32 mm size Bottal
Trap of approved quality & make and as per
thedirection of Enginer-in-charge. 17.22A 3 Each 886.25 739.58 2218.73
8 Providing & fixing PTMT towl rail complete with
brackets fixed to wooden cleats with cp brass screws
with concealed fitting arrangement of approved quality
and colour. 600 mm. long towl rail length of 645 mm.
width 78 mm. and effective height of 88 mm,
weighing not less than 190 gms.
17.73.2 0 Each 600.35 500.99 0.00
9 Providing and fixing PTMT Liquid soap container 17.71 4 Each 146.30 122.09 488.35
109 mm wide ,125 mm high and 112 mm distance
from wall of standerd shape with bracket of the same
10 Providing and fixing Toilet paper holder
a) C.P. brass 17.34.1 4 Each 680.80 568.13 2272.51
11 Providing & fixing 600x120x5 mm glass self with
edges round off, supported on anodiesd aluminium
angle framewith C.P. brass bracket and guard rail
complete fixed with 40 mmlong screws, rawl plugs
etc, complete.
17.33 4 Each 942.15 786.22 3144.90
TOTAL DSR 2021 52045.26
12 Providing and Fixing C.P. brass Ablution health
faucet assembly with 1.20 m long braided PVC hose
with mounting bracket fixed on wall complete.[FOR
EWC] Make-ESSCO ALE-583
NS 1 Each 1100.00 1100.00
13 Supplying & Fixing of CP soap tray fixed to the wall
with PVC rubber plug with CP brass screws- Make-
ESSCO AEC-1131 NS 2 Each 855.00 1710.00
TOTAL(SCHEDULE ITEMS) 52045.26
TOTAL( NON SCHEDULE ITEMS) 2810.00
TOTAL( SCHEDULE+NON SCHEDULE ITEMS)
Rs. 54855.26
SOIL WASTE & VENT PIPES AND FITTINGS - II
1 Providing and fixing on wall face unplasticised Rigid
PVC rain water pipes conforming to IS : 13592 Type
A including jointing with seal ring conforming to IS :
5382 leaving 10 mm gap for thermal expansion . (i)
Single socketed pipes.
a) 110mm diameter 12.41.2 3.00 Metre 319.75 266.83 800.49
2 Making khurras 45x45 cm with average minimum
thickness of 5 cm cement concrete [Link] (1 cement : 2
coarse sand : 4 graded stone aggregate of 20 mm
nominal size) over PVC sheet 1m x 1 m x 400 micron,
finished with 12 mm cement plaster 1:3 (1 cement : 3
coarse sand) and a coat of neat
cement,punning,rounding the edges and making and
finishing the outlet complete.
a) 110mm 12.22 1 Each 266.60 222.48 222.48
3 Providing and fixing unplasticised -PVC pipe clips of
approved design to unplasticised - PVC rain water
pipes by means of 50x50x50mm hard wood plugs,
screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1
cement : 4 coarse sand) and making good the wall etc.
complete.
a) 110mm 12.43.2 4 Each 309.50 258.28 1033.11
4 Providing and fixing to the inlet mouth of rain water
pipe cast iron grating 15 cm diameter and weighing
not less than 440 grams. 12.44 1 Each 47.90 39.97 39.97
5 Providing & fixing 32 # G.I. Pipes spout including 18.10.4 9 Metre 563.60 470.32 4232.92
cutting & making good the walls etc.
6 Providing and fixing in floor and wall face Ringfit
UPVC ASTRAL ULTRADRAIN Conventional
system for soil and waste water pipes conforming to
(HSN CODE: 3917) Type B including jointing with
seal ring. (i) Double socketed pipes.
a) 110mm dia U.P.V.C. pipe NSR 15 Metre 610.00 9150.00
b) 90mm dia U.P.V.C. pipe NSR 10 Metre 510.00 5100.00
7 Providing & fixing UPVC Floor trap of self cleansing
design with CP Jali complete in all respects. (Make :
Supreme / Finolex / Prince)
P-Trap type Floor Trap 110 x 110 mm NSR 2 Each 270.00 540.00
8 Providing and fixing terminal guard.
a) 110mm NSR 2 Each 80.00 160.00
b) 90mm NSR 5 Each 70.00 350.00
9 Providing and fixing on wall face unplasticised - PVC
moulded fittings/accessories for unplasticised Rigid
PVC pipes including jointing with seal ring leaving 10
mm gap for thermal expansion.
110mm bend NSR 2 Each 220.00 440.00
90 mm bend NSR 5 Each 205.00 1025.00
Coupler
110mm bend NSR 2 Each 150.00 300.00
90 mm bend NSR 5 Each 140.00 700.00
Single tee with door
110x110x110 mm NSR 2 Each 335.00 670.00
110x110x90 mm NSR 5 Each 245.00 1225.00
10 Providing and fixing clean out plug
110 mm dia. NSR 3 Each 135.00 405.00
TOTAL(SCHEDULE ITEMS) 26393.97
TOTAL( NON SCHEDULE ITEMS) 0.00
TOTAL( SCHEDULE+NON SCHEDULE ITEMS)
Rs. 26393.97
WATER SUPPLY PIPES AND FITTINGS - III
1 Providing & fixing G.I. pipes complete with G.I.
fittings & clamps including cutting & making good the
walls etc.
(internal work)
i) Exposed on wall
25mm dia nominal bore 18.10.3 5 Metre 491.20 409.91 2049.53
32mm dia nominal bore 18.10.4 4 Metre 563.60 470.32 1881.30
2 Painting G.I. pipes and fittings with two coats of anti
corrosive bitumastic paint of approved quality.
15mm dia nominal bore. 18.40.1 5 Metre 10.05 8.39 41.93
20mm dia nominal bore. 18.40.2 4 Metre 12.00 10.01 40.06
3 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply including all CPVC plain & brass
threaded fittings including fixing the pipe with clamps
at 1.00m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer
in Charge.
(internal work)
i) Exposed on wall
25mm dia nominal outer dia pipes 18.7.3 5 Metre 408.55 340.93 1704.67
4 Providing and fixing Chlorinated Polyvinyl Chloride
(CPVC) pipes, having thermal stability for hot & cold
water supply including all CPVC plain & brass
threaded fittings i/c fixing the pipe with clamps at
1.00m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the
cost of cutting chases and making good the same
including testiang of joints complete as per direction
of Engineer in Charge.
Concealed work including cutting chases and making
good the walls etc.
15mm dia nominal outer dia pipes 18.8.1 15 Metre 441.15 368.14 5522.10
20mm dia nominal outer dia pipes 18.8.2 10 Metre 513.75 428.72 4287.24
25mm dia nominal outer dia pipes 18.8.3 15 Metre 626.05 522.44 7836.58
5 Providing & fixing CP brass bib cock of approved
quality conforming to IS 8931
a) 15mm nominal bore 18.49.1 5 Each 434.20 362.34 1811.70
6 Providing & fixing C.P. brass long body bib cock of
approved quality conforming to IS standards and
weighing not less than 690 gms.
a) 15mm nominal bore 18.51.1 3 Each 708.40 591.16 1773.48
7 Providing & fixing C.P. brass angle valve for basin
mixer and gyser points of approved quality
conforming to IS 8931
a) 15mm nominal bore 18.53.1 3 Each 500.35 417.54 1252.63
8 Providing & fixing C.P. Brass extension nipple(size
15mmx50mm) of approved make and quality as per
direction of Engineer-in-charge. 18.53A 3 Each 61.70 51.49 154.47
9 Providing and fixing gun metal gate valve with wheel
of approved quality.
25mm dia nominal bore 18.17.1 2 Each 532.35 444.25 888.49
32mm dia nominal bore 18.17.2 3 Each 589.90 492.27 1476.81
10 Providing and fixing ball valve (brass) of approved
quality, High or low pressure, with plastic floats
complete
25 mm nominal bore 18.18.3 2 Each 399.15 333.09 666.18
11 Providing and placing on terrace (at all floor levels)
polyethylene water storage tank. IS:12701 marked,
with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for
tank.
18.48 500 Per Ltrs 9.70 8.09 4047.33
TOTAL(SCHEDULE ITEMS) 35434.50
TOTAL( NON SCHEDULE ITEMS) 0.00
TOTAL( SCHEDULE+NON SCHEDULE ITEMS)
35434.50
SCHEDULE OF QUANTITIES FOR INTERNAL SEWERAGE SYSTEM - IV
1 Excavating trenches of required width for pipes, cables
etc. including excavation for sockets and dressing of
sides, ramming of bottoms, depth upto 1.5m including
getting out the excavated soil, and then returning the
soil as required, in layers not exceeding 20cm in depth
including consolidating each deposited layer by
ramming, watering etc. and disposing of surplus
excavated soil as directed, within a lead of 50m.
2.10
All kinds of soil 2.10.1
Pipes, cables etc. exceeding 80mm dia but not
exceeding 300mm. [Link] metre 10.00 417.35 348.28 3482.79
2 Providing, laying and jointing glazed stoneware pipes
grade 'A' with stiff mixture of cement mortar in the
proportion of 1:1 (1 cement : 1 fine sand) including
testing of joints etc. complete.
19.1
100mm diameter 19.1.1 metre 10.00 375.75 313.56 3135.63
3 Providing and laying cement concrete [Link] (1
cement: 5 coarse sand : 10 graded stone aggregate
40mm nominal size) all round S.W. pipes including
bed concrete as per standard design
19.2
100mm dia SW pipe 19.2.1 metre 4.00 895.50 747.29 2989.18
4 Providing and laying Non pressure NP 2 class (light
duty) RCC pipe with collars jointed with stiff
mixture of cement mortar in the proportion of 1:2
(1cement : 2 fine sand ) including testing of joints
etc. complete.
19.6
150 mm. dia. RCC Pipes 19.6.2 metre 15.00 493.10 411.49 6172.38
5 Providing and laying cement concrete [Link] (1
cement: 5 coarse sand : 10 graded stone aggregate
40mm nominal size) upto the haunches of pipes
including bed concrete as per standard design
19.3
150 mm. dia. RCC Pipes 19.3.2 metre 5.00 689.75 575.60 2877.98
6 Providing and fixing square-mouth S.W. gully trap
grade‘A’ complete with C.I. grating, brick masonry
chamber with water tight C.I. cover with frame of 300
x300 mm size (inside) the weight of cover to be not
less than 4.50 kg and frame to be not less than 2.70 kg
as per standard design
19.4
150 x 100 mm size P type 19.4.2
With Sewer bricks conforming to IS : 4885 [Link] each 2.00 2428.45 2026.54 4053.08
7 Constructing brick masonry manhole in cement mortar
1:4 (1 cement :4 coarse sand) RCC top slab with [Link]
mix (1 cement :2 coarse sand :4 graded stone
aggregate 20mm nominal size), foundation concrete
[Link] mix (1 cement :4 coarse sand :8 graded stone
aggregate 40mm nominal size) inside plastering 12mm
thick with cement mortar 1:3 (1 cement :3 coarse sand)
finished with floating coat fo neat cement and making
channels in cement concrete [Link] (1 cement :2 coarse
sand :4 graded stone aggregate 20mm nminal size)
finished with a floating coat of neat cement complete
as per standard design.
19.7
8 Inside size 90x80cms and 45cms deep including CI
cover with frame (light duty) 455x610mm internal
diamensions total weight of cover and frame to be not
less than 38 kg (weight of cover 23 kg and weight of
frame 15kg).
19.7.1
With FPS bricks of class designation 75 [Link]
(i) For Sewer Line each 2.00 11687.10 9752.88 19505.77
9 Extra for depth for manholes:
Size 90x80cm with FPS bricks class I). [Link] metre 1.00 8127.45 6782.36 6782.36
10 Providing M.S. foot rests including fixing in manholes
with 20x20x10 cm cement concrete blocks [Link] (1
cement:3 coarse sand :6graded stone aggregate 20 mm
nominal size) as per standard design
19.15
With 20x20 mm square bar 19.15.1 each 8.00 461.35 385.00 3079.97
TOTAL(SCHEDULE ITEMS) 48999.17
TOTAL(NON SCHEDULE ITEMS) 0.00
TOTAL(SCHEDULED+NON SCHEDULE
ITEMS) Rs. 48999.17
SUMMARY OF COST
SANITARY FIXTURES & ACCESSORIES SUB-HEAD I 54855.26
SOIL WASTE & VENT PIPES AND FITTINGS SUB-HEAD II 26393.97
WATER SUPPLY PIPES AND FITTINGS SUB-HEAD III 35434.50
INTERNAL SEWERAGE SYSTEM SUB-HEAD IV 48999.17
SUB TOTAL 165682.90
SAY Rs 165683.00
[Link]. ITEM UNIT QTY. RATE
1 Providing and Fixing C.P. brass Ablution health faucet assembly
with 1.20 m long braided PVC hose with mounting bracket fixed
on wall complete.[FOR EWC] Make-ESSCO ALE-583
Each 1 1100.00
2 Supplying & Fixing of CP soap tray fixed to the wall with PVC
rubber plug with CP brass screws- Make-ESSCO AEC-1131
Each 1 855.00
3 Providing and fixing in floor and wall face Ringfit UPVC
ASTRAL ULTRADRAIN Conventional system for soil and waste
water pipes conforming to (HSN CODE: 3917) Type B including
jointing with seal ring. (i) Double socketed pipes.
a) 110mm dia U.P.V.C. pipe Metre 1 610.00
b) 90mm dia U.P.V.C. pipe Metre 1 510.00
4 Providing & fixing UPVC Floor trap of self cleansing design with
CP Jali complete in all respects. (Make : Supreme / Finolex /
Prince)
P-Trap type Floor Trap 110 x 110 mm Each 1 270.00
5 Providing and fixing terminal guard.
a) 110mm Each 1 80.00
b) 90mm Each 1 70.00
6 Providing and fixing on wall face unplasticised - PVC moulded
fittings/accessories for unplasticised Rigid PVC pipes including
jointing with seal ring leaving 10 mm gap for thermal expansion.
110mm bend Each 1 220.00
90 mm bend Each 1 205.00
Coupler
110mm bend Each 1 150.00
90 mm bend Each 1 140.00
Single tee with door
110x110x110 mm Each 1 335.00
110x110x90 mm Each 1 245.00
7 Providing and fixing clean out plug
110 mm dia. Each 1 135.00
BILL OF QUANTITY
PART (A): SCHEDULE ITEMS (AS PER PWD SCHE. 2018)
[Link]. SCH. No. DESCRIPTION UNIT QTY. RATE AMOUNT
1 138(C) Wiring points for light with 1 [Link] PVC insulated
multistrand single core copper condutor cable in PVC
conduit pipe partly concealed in the wall and partly laid in
slab along with the reinforcement before concreting,
complete with 1.5 sq. mm. FR PVC insulated multistrand
copper earth contunity wire,piano type switch & ceiling
rose/angle/batten holder on 3mm thick phenolic paminated
backalite sheet [Link] in all [Link] directed
including matching colour wash.
Each 12 610.00 7320.00
2 141(C) Wiring points for Plug with 1 [Link] PVC insulated
multistrand single core copper condutor cable in PVC
conduit pipe partly concealed in the wall and partly laid in
slab along with the reinforcement before concreting,
complete with 1.5 sq. mm. FR PVC insulated multistrand
copper earth contunity wire,piano type switch & socket
sheet [Link] in all [Link] directed including
matching colour wash.
Each 6 327.00 1962.00
3 140(C) Wiring points for Fan /Fresh air fan (light duty exhaust
fan )with 1 [Link] PVC insulated multistrand single core
copper condutor cable in PVC conduit pipe partly concealed
in the wall and partly laid in slab along with the
reinforcement before concreting, complete with 1.5 sq. mm.
FR PVC insulated multistrand copper earth contunity
wire,piano type switch & ceiling rose on 3mm thick
phenolic paminated backalite sheet [Link] in all
[Link] directed including matching colour wash.
Each 6 671.00 4026.00
4 412 Supply & fixing of single wall bracket on matching
M.D.F.E.G. board base etc. complete in all required.
Cat. A Each 10 1650.00 16500.00
5 Supply and Fixing of LED Tube Light with batten suitable
for up to 1X22 watt LED tube light fitting complete
including tube on surface complete in all respect.
1413 1 X 22 W CAT-AAA Each 6 1190.00 7140.00
6 1501 Supply of Ceiling Fan with motor of A.C. Permanent
insulation capacitor rating confirming BEE 5 Star rating and
IS:374/79 and also comply with IS:1709/1984 with latest
amendment. The rated volage 220/240 volts, 50 Hz, 1-ph
[Link] fan assemble should consists of down rod blades,
shackle canopies etc and with double ball bearing system.
(i) BEE 5 Star rated-1200mm sweep Each 0 1800.00 0.00
7 1032 Supply fixing of Sheet Steel Enclosure For SP/DP Fore pole
MCB With Neutra link and earth terminall complete in all
respects as per direction and satisfaction of engineer-in-
charge.
Each 2 550.00 1100.00
8 Supply and fixing of 240 volts 'L' series miniature circuit
breaker 9 K.A / 10 [Link] existing MCB, DB complete with
connections as required.
a) 1009 6 - 32 amp. DP MCB(10KA) Each 5 740.00 3700.00
b) 1.26 Supplying and fixing modular blanking plate on the
existing modular plate & switch box excluding modular
plate as required. Each 4 32.00 128.00
9 1116 Erection and testing of ceiling fan and regulator for room
height upto 3.5mts. including supply of 3mm thick G.I.
down rod 19mm dia duly painted, complete in all respects.
Each 0 140.00 0.00
10 1120 Erection and testing exhaust fan on the exhisting hole with
suitable size of rag bolts nuts and washers etc. complete in
all respects. Each 6 195.00 1170.00
11 1122 Supply & fixing of 16 gauge [Link] duly painted
including making hole in the wall for exhaust fan and
finishing properly etc. complete as required. Each 6 810.00 4860.00
12 1149 S/F of hexagonal fan box with hexagonal side of approx
80mm in length fabricated from 16 SWGM.S. sheet
incorporating 10mm dia, M.S. round barduly bent for
supporting fan hanger dully painted withred oxide and
screwing arrangement with wiring conduit laid in the R.C.C.
roof before concreting along with supply of all materials,
labour T & P etc., for proper completion of work.
Each 0 150.00 0.00
13 1203(A) Supply fixing of electronic fan regulator 120-280 V. ISI
marked, on the existing switch board including making
connetion, required material, labour T/P etc for proper
completion of work to the satisfaction of Engineer in charge
of work.
Each 0 267.00 0.00
14 703 Supply and burying of 600mm x 600 mmx6mm G.I. plate,
vertically for earthing with its top atleast 3 mts. below
ground level complete with 20mm [Link] and funnel for
watering and two earthing leads of No.8to10SWG [Link]
in 15mm diaG.I. pipe upto switch board (from apron to
switch board the cost of G.I. pipe and G.I. wire will be extra)
30cm. square C.I. frame with hinged cover, masonary
housing, alternate layers/of charcoal/ coke and salt at least
150mm thick alround etc. complete in all respects.
Each 1 5380.00 5380.00
15 716 Supplying & Laying of 25mmx3mm G.I. Strip for earthing
purpose as required complete in all respects. Metre 45 90.00 4050.00
16 723 Supply & fixing of two number 8 SWG G.I. wire for
earthing purpose as required complete in all respects. Metre 125 210.00 26250.00
CABLES
17 501 Supply and laying of aluminium conducter, PVC insulated
armoured, served, sheeted cable 1000 bolts grade at a depth
of 750mm below ground level over a cushion of 75mm thick
sand alround and protected with burnt bricks on sides and
top on surface, the
cable run shall be fixed on M.S. clamps etc. of suitable size.
501(a) 6 sqmm 2 core Metre 75 276.00 20700.00
18 503 Supply & fixing of brass nickle plated compression gland
for PVC insulated & armoured served sheathed,
underground cable including rubber ring etc. complete in all
respects. The armouring of the cable shall be properly
connected with the earth as per dire
503(a) 6 sqmm 2 core Each 3 76.00 228.00
19 504 Supplying and fixing of Palm / pin type copper tin plated
cables sockets (lugs) to the cable leads, insuslating with tape
and making of connections etc. complete in all respects as
per direction of Engineer-Incharge.
504(b) 6 sqmm Each 5 18.00 90.00
TOTAL (SCHEDULED ITEMS) 104604.00
PART B - NON - SCHEDULED ITEMS (AS PER
MARKET RATES )
1 Providing and Laying PVC pipe including jointing , cutting
and making good the walls & floors as per requirement.
a) NS 63 mm Metre 20 225.00 4500.00
3 Supply and erection of AC 230/250 Volts, 50 Hz exhaust
fans including providing nuts, bolts, mounting frame and
other accessories including connections etc. complete as
required
a) N.S 300mm sweep. Each 3 1470.00 4410.00
TOTAL NON SCHEDULED ITMES 8910.00
COST SUMMARY
(ELECTRICAL WORKS
TOTAL (SCHEDULED ITEMS 104604.00
TOTAL (NON-SCHEDULED ITEMS) 8910.00
TOTAL (SCHEDULED + NON-SCHEDULED ITEMS) 113514.00
SAY 113514.00
[Link]. ITEM UNIT QTY. RATE
1 Providing and Laying PVC pipe including jointing , cutting and
making good the walls & floors as per requirement.
a) 63 mm Metre 1 225.00
2 Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans
including providing nuts, bolts, mounting frame and other
accessories including connections etc. complete as required
a) 300mm sweep. Each 1 1470.00