ITR BREAKER TOOLS

PUNTEROS PARA MARTILLOS ITR

PUNTE PER MARTELLI ITR
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

SUMMARY
ÍNDICE

TOOLS: DESCRIPTION 2 ITR® USCO 27-28

TOOLS: USE & MAINTENANCE 3 JAB® 28
TOOLS: FAILURES 4 JCB® 28-30
AMPA® 5 KOMAC® 30-31
ARDEN® 5 KOMATSU® 31-32
ARROWHEAD® 5 KONAN® 32-33
AT THYSSEN KRUPP® / BERCO® 5 KOROTA® 33-34
ATLAS COPCO® 6-9 KRUPP® 34-36
BOBCAT® 9-10 KUBOTA® 37
BTI® 10 MONTABERT® 37-40
BTK® 11-12 MSB® 40-41
CASE / CNH® 12-13 MTB® 41-42
CATERPILLAR® 13-14 NPK® 42-45
CHICAGO PNEUMATIC® 14-15 OCM® 45-46
CJB® 15 OKADA® 46-47
CONTINENTAL® 15 OMAL® 47
D&A® 15-16 PROMOVE® 47-48
DAEMO® 16-17 RAMMER® (SANDVIK®) 48-51
DEHACO® 17 ROTAIR® 51
DEMOTER® 17-18 SOCOMEC® 52-53
DNB (Dainong)® 18 SOOSAN® 53-54
DRAGO® 18-19 STANLEY® 54
EURORAM® 19 STAR HAMMER® 54-55
FORCOP® 20 TABE® 55-56
FURUKAWA® 20-22 TAKEUCHI® / TOYO® 56-57
HANWOO® 23 TECNA® 57
HUPPI® 24 TOKU® 58-59
HYDRARAM® 24-25 VISTARINI® 59
INDECO® 25-26
ITALDEM® 27 IDENTIFY A ITR® BREAKER TOOL 60
 HYDRAULIC BREAKER TOOLS 2
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TOOLS
It is essential to choose the right tool for the given job, not only to increase productivity of the
hydraulic breaker, but also to extend the life of the tool.

The hydraulic breakers are available with a set of specifically designed working tools.

The operators can choose which tool to use based on the type of machine and the particular
working conditions bearing in mind that each tool has been designed for specific applications.

CHISEL TOOL
Suitable for all kind of excavations with tight cross-section on soft to medium-hard stratified
rock.

CONE TOOL
Suitable for breaking work on cement of medium hardness or soft non-stratified rock, and
secondary demolition of hard or very hard blocks.

CONE
FLAT

CHISEL
3
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TOOLS: USE AND MAINTENANCE

EVERY 4 Choosing a suitable tool is important to get the maximum productivity out of the
UEH SERIES hydraulic breaker. Therefore, the tool geometry must be suited to
OPERATING HOURS

both the morphology of the material to be demolished and the type of work to
be done. The UEH tools have been designed and constructed according to the
various demolition requirements. In order to allow the tools to perform with
NO! maximum efficiency, some rules must be observed in choosing the most suitable
Fig. 1 bit for proper use and maintenance.

 For models not equipped with an automatic greasing unit and, in any case, for
mm 5
small and medium-sized hammers, the tool needs to be greased 2-4 times a
day or at least every 4 OPERATING hours. (Fig. 1).

 If you work in very dusty environments, grease the bit 5-6 times a day or at
least every 2 hours of operation. Using suitable grease is important for a long
life of the tool. It is recommended to use greases containing percentages of
molybdenum bisulphide or graphite based on betonite and copper oxide with
good oxidation stability under stress and able to withstand high pressures in
order to prevent friction between the tool and the bushings. In addition, the
Fig. 2
greases used must have good viscosity, be 100% water-repellent and have very
high thermal resistance. For these reasons, it is recommended to use “copper
grease”.

 The area where the tool rests on the impact bushing may not be more than
5mm worn (Fig. 2), otherwise the tool needs to be replaced. Should this area
be excessively worn it is advisable to reconstruct it on a lathe possibly
NO!
retreating the bit.
Fig. 3

 Once the tool has been removed, store it at a temperature not below 0°C. Do
hot heat the bit before starting work. Work carefully for the first 15 minutes to
let the tool gradually warm up. Do not expose the tool to the elements as the
sliding areas would oxidise.
NO!
 DO NOT USE the bit as a hook to lift weights (Fig. 3 ).

 DO NOT USE the bit as a lever (Fig. 4).

Fig. 4
 Check that the sliding areas of the tool are well lubricated. In case of seizure,
remove the obstruction with a fine-grain grinding wheel and lamellar brush.

 Keep the bit well sharpened to ensure maximum productivity

 HYDRAULIC BREAKER TOOLS 4
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

Each tool has specific characteristics that make it suitable for the type of
YES! material to be demolished. To demolish large rocks, it is advisable to start with
not too large spikes. Sometimes a cushion of rock dust might form in the hole
drilled (Fig. 5). If the dust has not been expelled, the impact force of the tool will
discharge onto the dust cushion without cutting into the rock. In this case, to
Fig. 5
prevent damaging the tool, make another hole until cracking the rock. Fit the
tool most suited to the type of work to be done on the hydraulic demolishing
hammer.

TOOLS: FAILURES

1 Breakage due to too many empty strokes and excessive bushing wear.

2 Breakage due to:

3 Steel defect. WARRANTY IS ACTIVE !!

4 Typical breakage due to pressure and leverage.

5 Breakage due to incorrect positioning of the tool on the material.

6 Mushrooming effect due to insisting on the same point without

penetrating the material.
5
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

AMPA® ARROWHEAD®

KB120 AS20

PN USCO PROFILE Ø L WEIGHT

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
AS20P PYRAMIDAL 45 - -
KB120E CHISEL 149 1350 157

KB120C CONICAL 149 1350 157

AS40
KB120P PYRAMIDAL 149 1350 157

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
KB600
AS40P PYRAMIDAL 65 - -

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
S60
KB600E CHISEL 75 700 21
PN USCO PROFILE Ø L WEIGHT
KB600C CONICAL 75 700 21
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KB600P PYRAMIDAL 75 700 21
S60 GENERIC 75 708 21

ARDEN® AT THYSSEN-KRUPP/BERCO®
AB152P
AT20

PN USCO PROFILE Ø L WEIGHT

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
AB152P PYRAMIDAL 57 - -
AT20E CHISEL 42 420 4

AT20C CONICAL 42 420 4

AB282 AT20P PYRAMIDAL 42 420 4

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) AT70
AB282P PYRAMIDAL 70 - -
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
AB1052 AT70E CHISEL 52 520 8

AT70C CONICAL 52 520 8

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) AT70P PYRAMIDAL 52 520 8

AB1052P PYRAMIDAL 104 - -

AT120
AB1850
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) AT120E CHISEL 62 600 12

AB1850P PYRAMIDAL 134 1200 114 AT120C CONICAL 62 600 12

AT120P PYRAMIDAL 62 600 12

AB2450
AT170
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
AB2450P PYRAMIDAL 150 1350 157
AT170E CHISEL 70 700 19

AT170C CONICAL 70 700 19

AT170P PYRAMIDAL 70 700 19

 HYDRAULIC BREAKER TOOLS 6
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

ATLAS COPCO®

TEX30H TEX110H

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

TEX30HE CHISEL 32 400 3 TEX110HE CHISEL 50 510 7

TEX30HP PYRAMIDAL 32 400 3 TEX110HC CONICAL 50 510 7

TEX110HP PYRAMIDAL 50 510 7

SB52
PB160
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
SB52E CHISEL 40 430 4 REFERENCIA USCO PERFIL (mm) (mm) (kg)

SB52P PYRAMIDAL 40 430 4 ACPB160 GENERIC 52 520 8

ACPB160E CHISEL 52 520 8

PB110
PB210
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
ACPB110 GENERIC 42 420 4 REFERENCIA USCO PERFIL (mm) (mm) (kg)

ACPB210 GENERIC 62 600 11

SB100 MK2
TEX180H
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
SB100MK2E PYRAMIDAL 45 510 7 REFERENCIA USCO PERFIL (mm) (mm) (kg)
SB100MK2C CONICAL 45 510 7 TE180HE CHISEL 65 600 13
SB100MK2P PYRAMIDAL 45 510 7 TE180HC CONICAL 65 600 13

TE180HP PYRAMIDAL 65 600 13

TEX75
TEX200H
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
TEXT75H GENERIC 45 510 7 REFERENCIA USCO PERFIL (mm) (mm) (kg)
TEXT75E CHISEL 45 510 7 TEX200HE CHISEL 65 650 15
TEXT75C CONICAL 45 510 7 TEX200HC CONICAL 65 650 15
TEXT75M BLUNT 45 510 7 TEX200HP PYRAMIDAL 65 650 15

TEX100H PB310

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
TEXT100HE CHISEL 45 510 7 ACPB310 GENERIC 70 700 20
TEXT100HC CONICAL 45 510 7

TEXT100HP PYRAMIDAL 45 510 7

PB420

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

ACPB420 GENERIC 80 850 300

7
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

MB700-800
TEX250H
HM580
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

TEX250HE CHISEL 80 700 26 MB700.HM580 GENERIC 100 1000 55

TEX250HC CONICAL 80 700 26 MB700.HM580E CHISEL 100 1000 55

TEX250HP PYRAMIDAL 80 700 26 MB700.HM580M BLUNT 100 1000 55

SBC610-11-12 MB750

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

SBC610E CHISEL 80 800 28 MB750E CHISEL 100 1000 62

SBC610C CONICAL 80 800 28 MB750C CONICAL 100 1000 62

SBC610P PYRAMIDAL 80 800 28 MB750P PYRAMIDAL 100 1000 62

MB500 TEX600H
HM350
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MB500.HM350 GENERIC 90 900 39 TEX600HE CHISEL 105 900 56

TEX600HC CONICAL 105 900 56

TEX400H TEX600HP PYRAMIDAL 105 900 56

PN USCO PROFILE Ø L WEIGHT MB1000

REFERENCIA USCO PERFIL (mm) (mm) (kg)

TEX400H3 CHISEL 95 840 41

PN USCO PROFILE Ø L WEIGHT
TEX400HC CONICAL 95 840 41 REFERENCIA USCO PERFIL (mm) (mm) (kg)

TEX400HM BLUNT 95 840 41 MB1000E CHISEL 110 1100 70

TEX400HP PYRAMIDAL 95 840 41 MB1000C CONICAL 110 1100 70

MB1000M BLUNT 110 1100 70

SB552 MB1000P PYRAMIDAL 110 1100 70

PN USCO PROFILE Ø L WEIGHT MB1200

REFERENCIA USCO PERFIL (mm) (mm) (kg) HM780
SB552E CHISEL 100 900 50 PN USCO PROFILE Ø L WEIGHT
SB552M BLUNT 100 900 50 REFERENCIA USCO PERFIL (mm) (mm) (kg)

SB552P PYRAMIDAL 100 900 50 MB1200.HM780 GENERIC 120 1100 89

MB1200E CHISEL 120 1100 89

SB702 MB1200C CONICAL 120 1100 89

MB1200M BLUNT 120 1100 89

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

SB702E CHISEL 105 1000 68

SB702P PYRAMIDAL 105 1000 68

 HYDRAULIC BREAKER TOOLS 8
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TEX1400H HB2200
HM1500
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

TEX1400HE CHISEL 125 1100 96 HB2200P PYRAMIDAL 150 1250 151

TEX1400HC CONICAL 125 1100 96 HB2200E CHISEL 150 1250 151

TEX1400HP PYRAMIDAL 125 1100 96 HB2200C CONICAL 150 1250 151

HB2200M BLUNT 150 1250 151

TEX1800H
HB2500
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
TEX1800HE CHISEL 134 1100 112 REFERENCIA USCO PERFIL (mm) (mm) (kg)

TEX1800HC CONICAL 134 1100 112 HB2500M BLUNT 155 1300 165

TEX1800HP PYRAMIDAL 134 1100 112 HB2500E CHISEL 155 1300 165

HB2500P PYRAMIDAL 155 1300 165

MB1500
HB3000-3100
PN USCO PROFILE Ø L WEIGHT HM2100
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
MB1500E CHISEL 134 1100 112 REFERENCIA USCO PERFIL (mm) (mm) (kg)

MB1500C CONICAL 134 1100 112 HB3000.HM2100 GENERIC 165 1350 194

MB1500M BLUNT 134 1100 112 HB3000E CHISEL 165 1350 194

MB1500P PYRAMIDAL 134 1100 112 HB3000C CONICAL 165 1350 194

HB3000M BLUNT 165 1350 194

MB1600
HM950 HB4200
PN USCO PROFILE Ø L WEIGHT HM2600
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
MB1600.HM950 GENERIC 135 1100 107 REFERENCIA USCO PERFIL (mm) (mm) (kg)

HB4200.HM2600 GENERIC 180 1600 290

MB1700
HM1000 HB3600
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
MB1700 GENERIC 140 1200 107

MB1700E CHISEL 140 1200 107 HB3600E CHISEL 170 1350 215

MB1700C CONICAL 140 1200 107 HB3600P PYRAMIDAL 170 1350 215

MB1700M BLUNT 140 1200 107

HM3000
HB2000
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) HM3000MC GENERIC 200 1700 339

HB2000M BLUNT 145 1230 160

HB2000E CHISEL 145 1230 160

HB2000C CONICAL 145 1230 160

HB2000P PYRAMIDAL 145 1230 160

9
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HB7000 1750
HM4000
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

HB7000.HM4000 GENERIC 210 1800 430 BCT1750 GENERIC 45 500 6

HB7000E CHISEL 210 1800 430

HB7000C CONICAL 210 1800 430

B500
HB7000M BLUNT 210 1800 430

PN USCO PROFILE Ø L WEIGHT

(mm)
BOBCAT® REFERENCIA USCO PERFIL (mm) (kg)

BCTB500 GENERIC 50 520 7

HB280
B600-700
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
BCTHB280 GENERIC 37 440 4
REFERENCIA USCO PERFIL (mm) (mm) (kg)

BCT600.700 GENERIC 50 540 8

290-300

HB680
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
BCTB290.300 GENERIC 40 420 4 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

BCTHB680 GENERIC 54 550 10

HB380

B850.950
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
BCTHB380 GENERIC 42 450 5 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

BCTB850.950 GENERIC 62 600 15

1250

PN USCO PROFILE Ø L WEIGHT

HB880
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
BCT1250 GENERIC 44 420 5
REFERENCIA USCO PERFIL (mm) (mm) (kg)

HB880 GENERIC 62 600 15

HB580

PN USCO PROFILE Ø L WEIGHT

2500-3500
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
BCTHB580 GENERIC 44 480 6
REFERENCIA USCO PERFIL (mm) (mm) (kg)

BCT2500.3500 GENERIC 63 280 13

1560

PN USCO PROFILE Ø L WEIGHT HB980

REFERENCIA USCO PERFIL (mm) (mm) (kg)

BCT1560 GENERIC 45 450 5 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

HB980 GENERIC 69 650 19

 HYDRAULIC BREAKER TOOLS 10
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

B1200 TB725
B1400 TB825
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

B1200.1400 GENERIC 74 740 23 TB725.825 GENERIC 115 930 67

TB925
H1180
TB975
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

H1180 GENERIC 78 710 24 TB925.975 GENERIC 135 1200 120

BTI® TB1675
TB1680
TB125
PN USCO PROFILE Ø L WEIGHT
TB135 (mm)
REFERENCIA USCO PERFIL (mm) (kg)
PN USCO PROFILE Ø L WEIGHT TB1675.1680 GENERIC 135 - -
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TB125.135 GENERIC 50 495 7

TB980X
TB225
PN USCO PROFILE Ø L WEIGHT
TB235 REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT TB980X GENERIC 140 - -
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TB225.235 GENERIC 58 590 11

TB1280X
TB275
PN USCO PROFILE Ø L WEIGHT
TB285 REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT TB1280X GENERIC 146 - -
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TB275.285 GENERIC 63 640 15

TB1425
TB1430
TB325
PN USCO PROFILE Ø L WEIGHT
TB335 REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT TB1425.1430 GENERIC 146 1180 150
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TB325.335 GENERIC 75 710 23

TB2080X
TB425
PN USCO PROFILE Ø L WEIGHT
TB625 REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT TB2080X GENERIC 160 1360 195
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TB452.625 GENERIC 95 800 38

TB2580

TB830X PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
TB2580 GENERIC 178 - -
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TB830X GENERIC 115 930 67

11
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

BTK®

OB008 OB040

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB008 GENERIC 45 450 5 OB040E CHISEL 74 710 20

OB040C CONICAL 74 710 20

OB040P PYRAMIDAL 74 710 20

OB011

PN USCO PROFILE Ø L WEIGHT

OB050
REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB011E CHISEL 48 500 7

PN USCO PROFILE Ø L WEIGHT
OB011C CONICAL 48 500 7 REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB011P PYRAMIDAL 48 500 7 OB050E CHISEL 85 850 33

OB050C CONICAL 85 850 33

OB050P PYRAMIDAL 85 850 33

OB026

PN USCO PROFILE Ø L WEIGHT

(mm)
OB100
REFERENCIA USCO PERFIL (mm) (kg)

OB026E CHISEL 61 600 15

PN USCO PROFILE Ø L WEIGHT
OB026C CONICAL 61 600 15 REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB026P PYRAMIDAL 61 600 15 OB100E CHISEL 110 950 60

OB100C CONICAL 110 950 60

OB025 OB100P PYRAMIDAL 110 950 60

PN USCO PROFILE Ø L WEIGHT

(mm)
CB115
REFERENCIA USCO PERFIL (mm) (kg)

OB025E CHISEL 68 660 17

PN USCO PROFILE Ø L WEIGHT
OB025C CONICAL 68 660 17 REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB025P PYRAMIDAL 68 660 17 CB115 GENERIC 110 1100 95

OB036 OB125

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB036E CHISEL 68 710 17 OB125 GENERIC 122 1100 86

OB036C CONICAL 68 710 17

OB036P PYRAMIDAL 68 710 17

CB140

PN USCO PROFILE Ø L WEIGHT

OB035 REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB140E CHISEL 122 1100 86

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) CB140C CONICAL 122 1100 86

OB035E CHISEL 70 700 18 CB140P PYRAMIDAL 122 1100 86

OB035C CONICAL 70 700 18

OB035P PYRAMIDAL 70 700 18 OB130

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB130 GENERIC 125 1200 98

 HYDRAULIC BREAKER TOOLS 12
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

CB735
OB150
CB120
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

OB150E CHISEL 130 1150 101 CB735.CB120 GENERIC 84 840 34

OB150C CONICAL 130 1150 101

OB150P PYRAMIDAL 130 1150 101 CB1150

CB150
PN USCO PROFILE Ø L WEIGHT
CB180
REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB1150.CB150 GENERIC 95 900 45

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB180E CHISEL 130 1150 101

CB1450
CB180C CONICAL 130 1150 101

CB180P PYRAMIDAL 130 1150 101 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB1450 GENERIC 106 1050 66

OB220

CB2850
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) CB200
OB220 GENERIC 140 1200 127 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB2850.200 GENERIC 115 1050 78

Case / CNH®
CB140
CB260
CB32
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)
CB140.CB32 GENERIC 45 500 6 CB260 GENERIC 125 1050 95

CB260E CHISEL 125 1050 95

CB200
CB260C CONICAL 125 1050 95
CB45
PN USCO PROFILE Ø L WEIGHT CB3750
REFERENCIA USCO PERFIL (mm) (mm) (kg)
CB320
CB200.CB45 GENERIC 50 530 7
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
CB370 CB3750.CB320 GENERIC 130 1100 104
CB65
PN USCO PROFILE Ø L WEIGHT CB4000
REFERENCIA USCO PERFIL (mm) (mm) (kg)
CB400
CB370.CB65 GENERIC 63 680 15
PN USCO PROFILE Ø L WEIGHT
CB370.CB65E CHISEL 63 680 15 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

CB4000.CB400 GENERIC 140 1200 130

CB620
CB85 CB5200
PN USCO PROFILE Ø L WEIGHT CB550
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
CB620.CB85 GENERIC 70 730 21
REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB5200.CB550 GENERIC 160 1350 193

13
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

CB6000 H70
CB700
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

CB6000.CB700 GENERIC 174 1450 247 CATH70E CHISEL 70 730 21

CATH70M BLUNT 70 730 21

CATERPILLAR®
H90CS
H35
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
CATH90CS GENERIC 84 840 34
CATH35E CHISEL 40 500 5

CATH35C CONICAL 40 500 5

CATH35P PYRAMIDAL 40 500 5

H100

PN USCO PROFILE Ø L WEIGHT

H45 REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH100 GENERIC 95 900 45

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH45 GENERIC 45 500 6 H115CS

PN USCO PROFILE Ø L WEIGHT

H50 REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH115CS GENERIC 106 1050 66

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH50 GENERIC 50 530 7 H120

PN USCO PROFILE Ø L WEIGHT

H55 REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH120M BLUNT 115 1050 78

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) CATH120E CHISEL 115 1050 78

CATH55E CHISEL 56 560 10 CATH120C CONICAL 115 1050 78

CATH55P PYRAMIDAL 56 560 10

H130CS
H63
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) CATH130CS GENERIC 130 1100 106

CATH63 GENERIC 63 680 15 CATH130CSC CHISEL 130 1100 106

H65 H140CS

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
CATH65E CHISEL 65 700 18 CATH140CS GENERIC 140 1200 134
CATH65P PYRAMIDAL 65 700 18 CATH140CSC CONICAL 140 1200 134
 HYDRAULIC BREAKER TOOLS 14
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

H160CS CP200.RX4

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH160CS GENERIC 160 1350 193 CP200.RX4 GENERIC 62 600 11

CP200.RX4P PYRAMIDAL 62 600 11

H170CS
CP300.RX6
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
CATH170 GENERIC 170 1350 215 REFERENCIA USCO PERFIL (mm) (mm) (kg)

CP300.RX6 GENERIC 70 700 20

H180S
CP400.550.R8.11
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
CATH180S GENERIC 170 1450 229 REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH180SM BLUNT 170 1450 229 CP400.550 GENERIC 80 850 30

H180DS CP750.RX14

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

CATH180DS GENERIC 175 - - CP750.RX14 GENERIC 100 1000 55

H195 CP1150

Ø PN USCO PROFILE Ø L WEIGHT

PN USCO PROFILE L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
CP1150 GENERIC 115 1070 72
CATH195 GENERIC 195 1700 370

CHICAGO PNEUMATIC® CP.RX18

CP100.RX2 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT CPRX18E CHISEL 119 - -

REFERENCIA USCO PERFIL (mm) (mm) (kg)
CPRX18P CHISEL 119 - -
CP100.RX2 GENERIC 42 420 4

CP1550
CP150.RX3
PN USCO PROFILE Ø L WEIGHT
Ø REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) CP1550 GENERIC 125 1100 96
CP150.RX3 GENERIC 52 520 8

CP1650.RX22

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

CP1650.RX22 GENERIC 135 1100 107

15
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

CP2250.RX29 RH1700

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)
CP2250.RX29 GENERIC 150 1250 151 RH1700C CONICAL 140 1220 124

CP3050.RX45 D&A®

PN USCO PROFILE Ø L WEIGHT DA8V

REFERENCIA USCO PERFIL (mm) (mm) (kg)

CP3050.RX45 GENERIC 165 1350 194 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

DA8VE CHISEL 44 500 6

CP4250.RX52
DA8VC CONICAL 44 500 6

PN USCO PROFILE Ø L WEIGHT DA8VP PYRAMIDAL 44 500 6

REFERENCIA USCO PERFIL (mm) (mm) (kg)

CP4250.RX52 GENERIC 180 1500 290 DA15V

DA20V
CJB® PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
CJB605 DA15VE.20V CHISEL 57 660 12

DA15VC.20V CONICAL 57 660 12

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DA15VP.20V PYRAMIDAL 57 660 12

CJB605 GENERIC 70 700 18

DA30V
DA50V
CJB634
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DA30VE.50V CHISEL 70 700 17

CJB634 GENERIC 150 1290 155 DA30VC.50V CONICAL 70 700 17

DA30VP.50V PYRAMIDAL 70 700 17

CONTINENTAL®
DA60V
RH200
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DA60VE CHISEL 75 - -
RH200E CHISEL 60 600 12
DA60VP PYRAMIDAL 75 - -
RH200C CONICAL 60 600 12

RH200P PYRAMIDAL 60 600 12

DA70V

RH1500 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT DA70VE CHISEL 80 840 28

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DA70VC CONICAL 80 840 28
RH1500C CONICAL 119 1050 80
DA70VP PYRAMIDAL 80 840 28
 HYDRAULIC BREAKER TOOLS 16
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

DAEMO®

DA100V DMB150V

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DA100VE CHISEL 94 990 50 DMB150V GENERIC 57 650 12

DA100VC CONICAL 94 990 50

DA100VP PYRAMIDAL 94 990 50

DMB.250

PN USCO PROFILE Ø L WEIGHT

DA130V
REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMB250E CHISEL 145 1280 150

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DMB250P PYRAMIDAL 145 1280 150

DA130V GENERIC 104 1000 55

DMB500V|50
DA150V
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DMB500V GENERIC 69 730 18

DA150VE CHISEL 115 1115 79

DA150VC CONICAL 115 1115 79 DMB1300

DA150VP PYRAMIDAL 115 1115 79

DA150VM BLUNT 115 1115 79 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMB1300E CHISEL 104 975 55

DA180V DMB1300C CONICAL 104 975 55

DMB1300M BLUNT 104 975 55

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DMB1300VP PYRAMIDAL 104 975 55

DA180VE CHISEL 125 1130 92

DMB1800
DA180VC CONICAL 125 1130 92
DMB2000
DA180VP PYRAMIDAL 125 1130 92
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DA220V DMB1800E CHISEL 119 1050 79

DMB1800C CONICAL 119 1050 79

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DMB1800P PYRAMIDAL 119 1050 79

DA220V GENERIC 134 1200 114

DMB2200
DMB2300
DA300V
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) DMB2200E CHISEL 135 1200 114

DA300V GENERIC 150 1350 157 DMB2200C CONICAL 135 1200 114

DMB2200M BLUNT 135 1200 114

DMB2200P PYRAMIDAL 135 1200 114

17
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

DMB2500V|250 DHB350S

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMB2500 CHISEL 149 1350 157 DHB350 S GENERIC 74 750 22

DMB4400
DHB405
(3000/3600)
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMB4400E CHISEL 150 1350 157 DHB405 GENERIC 80 900 32

DMB4400C CONICAL 150 1350 157

DMB4400M BLUNT 150 1350 157

DHB805
DMB4400P PYRAMIDAL 150 1350 157

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DEHACO®
DHB805 GENERIC 100 960 51

DHB55
DHB1605
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
DHB55 GENERIC 42 400 5 REFERENCIA USCO PERFIL (mm) (mm) (kg)

DHB1605 GENERIC 137 1150 114

DHB75
DHB2305
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
DHB75 GENERIC 45 450 6 REFERENCIA USCO PERFIL (mm) (mm) (kg)

DHB 2305 GENERIC 150 1250 165

DHB150S
DEMOTER®
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DM90-95
DHB150S GENERIC 45 500 6
S85
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DHB200S DM90.95 GENERIC 45 500 3

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DM120
S130
DHB200S GENERIC 53 580 8
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DHB305 DM120.S130 GENERIC 48 520 6

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DM220-40
S230
DH305 GENERIC 70 750 19
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

DM220.S230 GENERIC 65 620 18

 HYDRAULIC BREAKER TOOLS 18
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

DM160/S170 D60

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

(mm) REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (kg)

DM160.S170 GENERIC 67 600 11 DNB60E CHISEL 115 1050 68

DNB60C CONICAL 115 1050 68

DNB60P PYRAMIDAL 115 1050 68

DM300 (S300.260)

PN USCO PROFILE Ø L WEIGHT D70 (D90)

REFERENCIA USCO PERFIL (mm) (mm) (kg)

DM300E CHISEL 75 710 24 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DM300P PYRAMIDAL 75 710 24
DNB70 CHISEL 130 1150 120

DNB70 CONICAL 130 1150 120

S430 DNB70 PYRAMIDAL 130 1150 120

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) D110 IIS
DMS430 GENERIC 80 900 30
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DNB(Dainong)® DNBD110 GENERIC 140 1200 142

D25
D130
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DNB25E CHISEL 60 600 11
DNB130E CHISEL 155 1310 168
DNB25C CONICAL 60 600 11
DNB130C CONICAL 155 1310 168
DNB25P PYRAMIDAL 60 600 11
DNB130P PYRAMIDAL 155 1310 168

K25 II
D160
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DNBK25C CONICAL 60 570 11
DNB160E CHISEL 170 1550 265

DNB160C CONICAL 170 1550 265

D30 DNB160P PYRAMIDAL 170 1550 265

DNB160M BLUNT 170 1550 265

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
DRAGO®
DNB30E CHISEL 75 700 21

DNB30P PYRAMIDAL 75 700 21 DRH80

PN USCO PROFILE Ø L WEIGHT

[Link] REFERENCIA USCO PERFIL (mm) (mm) (kg)

DRH80 PYRAMIDAL 50 500 7

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

DNBK30S GENERIC 75 700 21

DRH120

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DRH120 PYRAMIDAL 58 580 11
19
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

DRH150 RM56

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DRH150 PYRAMIDAL 63 670 15 EURAM56 GENERIC 56 600 10

DRH180-250 RM65-70

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DRH180 PYRAMIDAL 75 710 21 EURAM65.70 GENERIC 65 700 14

DRH280 RM75

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DRH280 PYRAMIDAL 95 800 37 EURAM75 GENERIC 73 720 21

DRH650-900 RM80-82

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DRH650.900 GENERIC 115 1100 80 EURAM80.82 GENERIC 79 700 22

DRH1150-1160 RM85-90

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DRH1150.1160 GENERIC 135 1200 120 EURAM85.90 GENERIC 89 780 36

DRH1900 RM110

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)
DRH1900 GENERIC 135 1200 140 EURORAM110 GENERIC 110 900 57

EURORAM®
RM115
RM45 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
EURORAM115 GENERIC 114 1000 70
REFERENCIA USCO PERFIL (mm) (mm) (kg)

EURAM45 GENERIC 45 440 5

RM120

RM48 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
EURORAM120 GENERIC 120 1050 85
REFERENCIA USCO PERFIL (mm) (mm) (kg)

EURAM48 GENERIC 48 530 7

 HYDRAULIC BREAKER TOOLS 20
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

FORCOP®

RM130 65

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

EURAM130 GENERIC 130 1050 95 FCP65E CHISEL 65 660 16

FCP65P PYRAMIDAL 65 660 16

RM140
75
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
EURAM140 GENERIC 140 1150 122 REFERENCIA USCO PERFIL (mm) (mm) (kg)

FCP75 CHISEL 75 700 19

RM145 FCP75 CHISEL 75 700 19

FCP75 CHISEL 75 700 19

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
FURUKAWA®
EURAM145 GENERIC 144 1250 150

HB1G
RM150
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg) [Link] CHISEL 36 400 3
EURAM150 GENERIC 149 1250 160 [Link] CONICAL 36 400 3

HB1GEPFK PYRAMIDAL 36 400 3

RM160
HB2G
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
AEURAM160 GENERIC 159 1350 186
REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 45 460 5

RM180 [Link] CONICAL 45 460 5

[Link] PYRAMIDAL 45 460 5

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

EURAM180 GENERIC 180 1450 260 F3

PN USCO PROFILE Ø L WEIGHT

RM195 REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 52 510 8

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) [Link] CONICAL 52 510 8

EURAM195 GENERIC 195 1550 320 [Link] PYRAMIDAL 52 510 8

RM215 HB100

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)
EURAM215 GENERIC 215 1550 385 [Link] CHISEL 55 460 7

HB100CFK CONICAL 55 460 7

[Link] PYRAMIDAL 55 460 7

21
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HB3G HB8G

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 60 560 12 [Link] CHISEL 90 760 34

[Link] CONICAL 60 560 12 [Link] CONICAL 90 760 34

HB3GEPFK PYRAMIDAL 60 560 12 [Link] PYRAMIDAL 90 760 34

F5 F12

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 68 600 16 [Link] CHISEL 105 1090 65

[Link] CONICAL 68 600 16 [Link] CONICAL 105 1090 65

[Link] PYRAMIDAL 68 600 16 [Link] PYRAMIDAL 105 1090 65

[Link] BLUNT 105 1090 65

HB200
HB10G
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 70 600 15 REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CONICAL 70 600 15 [Link] CHISEL 105 1010 62

[Link] PYRAMIDAL 70 600 15 [Link] CONICAL 105 1010 62

[Link] PYRAMIDAL 105 1010 62

F6
F19
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 75 740 21 REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 75 740 21 [Link] CHISEL 120 1180 85
[Link] BLUNT 75 740 21
[Link] CONICAL 120 1180 85
[Link] PYRAMIDAL 75 740 21
[Link] PYRAMIDAL 120 1180 85

[Link] BLUNT 120 1180 85

HB5G
HB15G
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 75 650 20
REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 75 650 20
[Link] CHISEL 120 970 78
[Link] PYRAMIDAL 75 650 20
[Link] CONICAL 120 970 78

[Link] PYRAMIDAL 120 970 78

F9

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 90 850 35

[Link] BLUNT 90 850 35

[Link] CONICAL 90 850 35

[Link] PYRAMIDAL 90 850 35

 HYDRAULIC BREAKER TOOLS 22
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

F20 (F22) HB40G

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] BLUNT 135 1250 118 [Link] BLUNT 160 1650 179

[Link] CHISEL 135 1250 118 [Link] CHISEL 160 1650 179

[Link] CONICAL 135 1250 118 [Link] CONICAL 160 1650 179

[Link] PYRAMIDAL 135 1250 118 [Link] PYRAMIDAL 160 1650 179

HB20G F45

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] BLUNT 135 1200 122 [Link] CHISEL 165 1500 200

[Link] CHISEL 135 1200 122 [Link] CONICAL 165 1500 200

[Link] CONICAL 135 1200 122 [Link] PYRAMIDAL 165 1500 200

[Link] PYRAMIDAL 135 1200 122 [Link] BLUNT 165 1500 200

F27 F70

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] BLUNT 140 1300 135 [Link] CHISEL 180 1600 268

[Link] CHISEL 140 1300 135 [Link] CONICAL 180 1600 268

[Link] CONICAL 140 1300 135 [Link] PYRAMIDAL 180 1600 268

[Link] PYRAMIDAL 140 1300 135

HB50G
F35
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) [Link] CHISEL 180 1500 246
[Link] BLUNT 150 1400 168 [Link] CONICAL 180 1500 246
[Link] CHISEL 150 1400 168 [Link] PYRAMIDAL 180 1500 246
[Link] CONICAL 150 1400 168

[Link] PYRAMIDAL 150 1400 168

F100

HB30G PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT [Link] GENERIC 210 1800 450

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] BLUNT 150 1300 160

[Link] CHISEL 150 1300 160

[Link] CONICAL 150 1300 160

[Link] PYRAMIDAL 150 1300 160

23
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HANWOO®

RHB301 RHB309

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

RHB301E CHISEL 45 480 5 RHB309E CHISEL 85 800 29

RHB301C CONICAL 45 480 5 RHB309P PYRAMIDAL 85 800 29

RHB301P PYRAMIDAL 45 480 5

RHB313
RHB302-303
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) RHB313E CHISEL 105 1050 64

RHB302E CHISEL 50 500 8 RHB313C CONICAL 105 1050 64

RHB302P PYRAMIDAL 50 500 8 RHB313P PYRAMIDAL 105 1050 64

RHB303 RHB317

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

RHB303E CHISEL 55 510 12 RHB317E CHISEL 116 - -

RHB303C CONICAL 55 510 12 RHB317P PYRAMIDAL 116 - -

RHB303P PYRAMIDAL 55 510 12

RHB320
RHB305
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
RHB320E CHISEL 124 1150 93
RHB305E CHISEL 68 760 16
RHB320C CONICAL 124 1150 93
RHB305C CONICAL 68 760 16
RHB320P PYRAMIDAL 124 1150 93
RHB305P PYRAMIDAL 68 760 16

RHB322-325
RHB306
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
RHB322E CHISEL 134 1200 118
RHB306E CHISEL 80 850 27
RHB322C CONICAL 134 1200 118
RHB306C CONICAL 80 850 27
RHB322P PYRAMIDAL 134 1200 118
RHB306P PYRAMIDAL 80 850 27

RHB330-328
RHB308
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
RHB330E CHISEL 150 1450 175
RHB308 GENERIC 85 800 29
RHB330C CONICAL 150 1450 175

RHB330P PYRAMIDAL 150 1450 175

 HYDRAULIC BREAKER TOOLS 24
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

RHB340 902

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

RHB340E CHISEL 165 1450 217 HUP902E CHISEL 115 1000 70

RHB340P PYRAMIDAL 165 1450 217 HUP902C CONICAL 115 1000 70

HUP902P PYRAMIDAL 115 1000 70

RHB350
HYDRARAM®
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) SG200
RHB350E CHISEL 180 1600 283
PN USCO PROFILE Ø L WEIGHT
RHB350P PYRAMIDAL 180 1600 283
REFERENCIA USCO PERFIL (mm) (mm) (kg)

SG200E CHISEL 44 490 5

HUPPI®
SG200P PYRAMIDAL 44 490 5

72
SG350
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
HUP72E CHISEL 45 490 5 REFERENCIA USCO PERFIL (mm) (mm) (kg)

HUP72C CONICAL 45 490 5 SG350E CHISEL 68 700 17

HUP72P PYRAMIDAL 45 490 5 SG350P PYRAMIDAL 68 700 17

102 SG400

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
HUP102E CHISEL 58 620 11
SG400E CHISEL 75 750 21
HUP102P PYRAMIDAL 58 620 11
SG400P PYRAMIDAL 75 750 21

302
SG800
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HUP72E CHISEL 75 740 23
SG800E CHISEL 100 1000 55
HUP72C CONICAL 75 740 23
SG800P PYRAMIDAL 100 1000 55
HUP72P PYRAMIDAL 75 740 23

SG1200
402
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
SG1200E CHISEL 119 1160 90
HUP402E CHISEL 95 880 40
SG1200P PYRAMIDAL 119 1160 90
HUP402E CHISEL 95 880 40

HUP402E CHISEL 95 880 40

25
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

UP180
SG1800
MES180
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

SG1800E CHISEL 135 1160 131 MES180E CHISEL 48 530 7

SG1800P PYRAMIDAL 135 1160 131 MES180C CONICAL 48 530 7

MES180P PYRAMIDAL 48 530 7

MES180M BLUNT 48 530 7

SG2100

PN USCO PROFILE Ø L WEIGHT UP300

REFERENCIA USCO PERFIL (mm) (mm) (kg) HP.UP350/MES300
SG2100E CHISEL 137 1300 128
PN USCO PROFILE Ø L WEIGHT
SG2100P PYRAMIDAL 137 1300 128 REFERENCIA USCO PERFIL (mm) (mm) (kg)

MES300E CHISEL 56 600 10

SG2500 MES300C CONICAL 56 600 10

MES300P PYRAMIDAL 56 600 10

PN USCO PROFILE Ø L WEIGHT MES300M BLUNT 56 600 10

REFERENCIA USCO PERFIL (mm) (mm) (kg)

SG2500E CHISEL 145 1200 138

HB.5 (MES521.552)
SG2500P PYRAMIDAL 145 1200 138 HP.UP500/MES300
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
SG2800
[Link] CHISEL 65 700 14
PN USCO PROFILE Ø L WEIGHT [Link] CONICAL 65 700 14
REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] PYRAMIDAL 65 700 14
SG2800E CHISEL 155 1300 183

SG2800P PYRAMIDAL 155 1300 183

UP553
HP600/MES553
SG5000
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
(mm) MES553E CHISEL 73 720 21
REFERENCIA USCO PERFIL (mm) (kg)
MES553C CONICAL 73 720 21
SG5000E CHISEL 178 1550 183
MES553P PYRAMIDAL 73 720 21
SG5000P PYRAMIDAL 178 1550 183

UP621
INDECO®
HP700/UP650/HB8
UP121 PN USCO PROFILE Ø L WEIGHT
MES121 REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT [Link] CHISEL 79 700 22

REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 79 700 22
MES121E CHISEL 45 440 5
[Link] PYRAMIDAL 79 700 22
MES121C CONICAL 45 440 5

MES121P PYRAMIDAL 45 440 5

UP900

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 89 700 30

[Link] PYRAMIDAL 89 700 30

 HYDRAULIC BREAKER TOOLS 26
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HB12 HP3500 (UP3500)

MES1200 MES3500
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 89 780 36 MES3500E CHISEL 145 1250 150

[Link] CONICAL 89 780 36 MES3500C CONICAL 145 1250 150

[Link] PYRAMIDAL 89 780 36 MES3500P PYRAMIDAL 145 1250 150

HB19 (HP1500) UP4000

MES1500 MES4000
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 110 900 57 MES4000E CHISEL 150 1250 160

[Link] CONICAL 110 900 57 MES4000C CONICAL 150 1250 160

[Link] PYRAMIDAL 110 900 57 MES4000P PYRAMIDAL 150 1250 160

UP1800 (HP1800) UP5000

MES1750-1850 MES5000
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MES1800E CHISEL 114 1000 70 MES5000E CHISEL 160 1350 186

MES1800C CONICAL 114 1000 70 MES5000C CONICAL 160 1350 186

MES1800P PYRAMIDAL 114 1000 70 MES5000P PYRAMIDAL 160 1350 186

UP2000 (HB27) UP7000

MES2000 MES7000
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
MES2000E CHISEL 120 1050 85 MES7000E CHISEL 180 1450 260
MES2000C CONICAL 120 1050 85 MES7000C CONICAL 180 1450 260
MES2000P PYRAMIDAL 120 1050 85 MES7000P PYRAMIDAL 180 1450 260
MES2000M BLUNT 120 1050 85

UP9000
UP2500 MES9000
MES2500
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
MES9000E CHISEL 195 1550 320
MES2500E CHISEL 130 1050 95
MES9000C CONICAL 195 1550 320
MES2500C CONICAL 130 1050 95
MES9000P PYRAMIDAL 195 1550 320
MES2500P PYRAMIDAL 130 1050 95

MES2500M BLUNT 130 1050 95 HP12000

MES1200
HP_UP3000
PN USCO PROFILE Ø L WEIGHT
(MES3000) REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT MES12000 GENERIC 215 1550 385

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MES3000P CHISEL 140 1150 122

MES3000C CONICAL 140 1150 122

MES3000P PYRAMIDAL 140 1150 122

27
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

ITALDEM®

K80 GK950-960

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] GENERIC 45 500 5 GK950.960 GENERIC 114 1000 70

[Link] CHISEL 45 500 5

[Link] CONICAL 45 500 5 GK1050

[Link] BLUNT 45 500 5

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
GK85-86
GK1050 GENERIC 114 1000 70

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
GK1350
GK85.86 GENERIC 110 500 6

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
GK160-161
GK1350 GENERIC 119 1150 90

GK1350E CHISEL 119 1150 90

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) GK1350C CONICAL 119 1150 90

GK160.161 GENERIC 56 530 9 GK1350M BLUNT 119 1150 90

GK210-211 GK1351

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
GK210.211 GENERIC 67 565 14 GK1351 GENERIC 120 1150 90

K270 ITR® USCO

PN USCO PROFILE Ø L WEIGHT UEH60P

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] GENERIC 80 750 21 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CHISEL 80 750 21
UEHD066016 CHISEL 40 420 4,5
[Link] CONICAL 80 750 21
UEHD066026 CONICAL 40 420 4,5
[Link] BLUNT 80 750 21

UEH80PC
SH290-291
UEH80PS

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)

SH290.291 GENERIC 80 640 21 UEHD086016 CHISEL 45 460 6

UEHD086026 CONICAL 45 460 6

GK600-610-620
UEH120PS
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
GK600.610.620 GENERIC 105 950 57
UEHD126010 CHISEL 45 530 7

UEHD126020 CONICAL 45 530 7

 HYDRAULIC BREAKER TOOLS 28
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

UEH190PCS UEH1700PS

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD196010 CHISEL 60 600 12 UEHD176000 CHISEL 140 1200 145

UEHD196020 CONICAL 60 600 12 UEHD176010 CONICAL 140 1200 145

UEH260PS UEH2400PS

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD276016 CHISEL 73 680 18 UEHD246000 CHISEL 145 1170 155

UEHD276026 CONICAL 73 680 18 UEHD246010 CONICAL 145 1170 155

UEH270JB JAB®
UEH270PCS
PN USCO PROFILE Ø L WEIGHT
JB8
REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD276010 CHISEL 80 700 25 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
UEHD276020 CONICAL 80 700 25
JABJ8E CHISEL 45 460 5

JABJ8C CONICAL 45 460 5

UEH400PS JABJ8P PYRAMIDAL 45 460 5

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) JB10
UEHD406010 CHISEL 80 700 27

UEHD406020 CONICAL 80 700 27

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

JABJB10 GENERIC 53 580 10

UEH500PS

PN USCO PROFILE Ø L WEIGHT JB20

REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD506010 CHISEL 95 850 41 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
UEHD506020 CONICAL 95 850 41
JABJB20 GENERIC 68 700 16

UEH1000
UEH1000PS JB80
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
UEHD109550 CHISEL 114 1000 82
JABJB80 GENERIC 135 1200 122
UEHD109560 CONICAL 114 1000 82

UEHD106030 BLUNT 114 1000 82

JCB®

UEH1300PS HM65

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD136000 CHISEL 125 1050 100 JCBHM65 GENERIC 40 400 4

UEHD136010 CONICAL 125 1050 100
29
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

JCB100-115 HM550

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

JCB115E CHISEL 45 500 6 HM550 GENERIC 84 840 34

JCB115C CONICAL 45 500 6

JCB115P PYRAMIDAL 45 500 6 HM495

PN USCO PROFILE Ø L WEIGHT

HM160 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

HM495 GENERIC 95 840 41

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM160 GENERIC 45 500 6 HM850

HM165 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM850 GENERIC 95 900 45

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM165 GENERIC 50 510 7 HM570

HM1050
PN USCO PROFILE Ø L WEIGHT
HM110 REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM570.1050 GENERIC 106 1050 66

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

JCB110E CHISEL 55 550 9 HM560

JCB110P PYRAMIDAL 55 550 9 HM1350
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM260 HM570.1050 GENERIC 115 1050 78

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM1150
HM260 GENERIC 63 680 15
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM265
HM1150 GENERIC 115 1000 70

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) HM1260
HM265 GENERIC 65 600 13
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM360
HM1260 GENERIC 115 1070 72

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) HM760
HM360 GENERIC 70 730 21
HM1750
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM385 HM760.1750 GENERIC 130 1100 104

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM360 GENERIC 80 800 28

 HYDRAULIC BREAKER TOOLS 30
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HM1560 KB150

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM1560 GENERIC 135 1100 107 KB150E CHISEL 46 500 6

KB150P PYRAMIDAL 46 500 6

HM860
KB200
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
HM860 GENERIC 140 1200 130 REFERENCIA USCO PERFIL (mm) (mm) (kg)

KB200E CHISEL 53 580 8

HM1760 KB200C CONICAL 53 580 8

KB200P PYRAMIDAL 53 580 8

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM1760 GENERIC 140 1200 13 KB250

PN USCO PROFILE Ø L WEIGHT

HM2460 REFERENCIA USCO PERFIL (mm) (mm) (kg)

KB250E CHISEL 58 600 11

PN USCO PROFILE Ø L WEIGHT
(mm) KB250P PYRAMIDAL 58 600 11
REFERENCIA USCO PERFIL (mm) (kg)

HM2460 GENERIC 150 1250 151

KB300
HM3060
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
(mm) KB300E CHISEL 68 690 18
REFERENCIA USCO PERFIL (mm) (kg)
KB300P PYRAMIDAL 68 690 18
HM3060 GENERIC 165 1350 194

HM4160 KB350

PN USCO PROFILE Ø L WEIGHT

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KB350E CHISEL 75 750 22
HM4160 GENERIC 180 1500 290
KB350P PYRAMIDAL 75 750 22

KOMAC®
KB400
KB100
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KB400E CHISEL 85 800 30
KB100E CHISEL 40 450 4 KB400P PYRAMIDAL 85 800 30
KB.100P PYRAMIDAL 40 450 4

KB1000

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

KB1000E CHISEL 100 1000 52

KB1000P PYRAMIDAL 100 1000 52

31
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

KB2000 JTHB10

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

KB2000 GENERIC 135 1200 122 JTHB10 GENERIC 45 470 5

KB2000E CHISEL 135 1200 122

KB2000C CONICAL 135 1200 122

JKHB71
KB2000M BLUNT 135 1200 122

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
KB3500
JKHB71 GENERIC 45 490 6

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
JTHB20
KB3500E CHISEL 140 1300 140

KB3500P PYRAMIDAL 140 1300 140 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

JTHB20 GENERIC 50 495 7

KB3600

PN USCO PROFILE Ø L WEIGHT JKHB101

REFERENCIA USCO PERFIL (mm) (mm) (kg)

KB3600 GENERIC 150 1300 163 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
KB3600E CHISEL 150 1300 163

KB3600C CONICAL 150 1300 163 JKHB101 GENERIC 57 590 10

KB3600M BLUNT 150 1300 163

JTHB30
KB4200
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) JTHB30 GENERIC 58 590 11

KB4200E CHISEL 155 1500 200

KB4200C CONICAL 155 1500 200 JTHB40

KB4200P PYRAMIDAL 155 1500 200

KB4200M BLUNT 155 1500 200

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

JTHB40 GENERIC 64 640 15

KOMATSU®

JTHB08 JKHB301

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
JTHB08 GENERIC 40 450 4
JKHB301 GENERIC 70 750 20

JKHB51 JTHB50

PN USCO PROFILE Ø L WEIGHT

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
JKHB51 GENERIC 44 460 5
JTHB50 GENERIC 75 710 23
 HYDRAULIC BREAKER TOOLS 32
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

JKHB401 JTHB230

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

JKHB401 GENERIC 80 920 32 JTHM230 GENERIC 146 1180 150

JTHM230E CHISEL 146 1180 150

JTHM230C CONICAL 146 1180 150

JTHB60/65

PN USCO PROFILE Ø L WEIGHT

(mm)
JTHB310
REFERENCIA USCO PERFIL (mm) (kg)

JTHB60.65 CHISEL 95 800 38

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

JKHB801 JTHB310 GENERIC 160 1360 195

JTHB310E CHISEL 160 1360 195

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

JKHB801 GENERIC 100 1100 55

JTHB400

PN USCO PROFILE Ø L WEIGHT

JTHB70 REFERENCIA USCO PERFIL (mm) (mm) (kg)

JTHB400 GENERIC 178 1540 280

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KONAN®
JTHB70 GENERIC 115 930 67

MKB300
JTHB100
PN USCO PROFILE Ø L WEIGHT
Ø REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) MKB300E CHISEL 70 750 20
JTHB100 GENERIC 115 930 67 MKB300P PYRAMIDAL 70 750 20

JTHB150 MKB1200

PN USCO PROFILE Ø L WEIGHT Ø

PN USCO PROFILE L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
JTHB150 GENERIC 135 1170 120
MKB1200E CHISEL 120 1150 86

MKB1200P PYRAMIDAL 120 1150 86

JKHB1500
MKB1500
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
JKHB1500 GENERIC 137 1250 145 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

MKB1500E CHISEL 135 1150 105

JTHB190 MKB1500P PYRAMIDAL 135 1150 105

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

JTHB190 GENERIC 140 1180 130

33
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

MKB2500 K50

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MKB2500E CHISEL 160 1350 192 KRT50E CHISEL 94 850 40

MKB2500P PYRAMIDAL 160 1350 192 KRT50C CONICAL 94 850 40

KRT50P PYRAMIDAL 94 850 40

MKB3000
K100
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
MKB3000E CHISEL 165 1500 205 REFERENCIA USCO PERFIL (mm) (mm) (kg)

MKB3000P PYRAMIDAL 165 1500 205 KRT100E CHISEL 114 960 64

KRT100C CONICAL 114 960 64

KOROTA® KRT100P PYRAMIDAL 114 960 64

K10
K120
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KRT10E CHISEL 45 500 5
KRT120E CHISEL 125 1100 90
KRT10C CONICAL 45 500 5
KRT120C CONICAL 125 1100 90
KRT10P PYRAMIDAL 45 500 5
KRT120P PYRAMIDAL 125 1100 90

K15
K170
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KRT15E CHISEL 60 600 11
KRT170E CHISEL 142 1200 126
KRT15C CONICAL 60 600 11

KRT15P PYRAMIDAL 60 600 11 KRT170C CONICAL 142 1200 126

KRT170P PYRAMIDAL 142 1200 126

K20
K1300
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
KRT20E CHISEL 72 610 17 REFERENCIA USCO PERFIL (mm) (mm) (kg)

KRT20C CONICAL 72 610 17 KRT1300E CHISEL 105 850 58

KRT20P PYRAMIDAL 72 610 17 KRT1300C CONICAL 105 850 58

KRT1300P PYRAMIDAL 105 850 58

K30
K1700
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
KRT30E CHISEL 80 705 23 REFERENCIA USCO PERFIL (mm) (mm) (kg)

KRT30C CONICAL 80 705 23 KRT1700E CHISEL 114 1000 70

KRT30P PYRAMIDAL 80 705 23 KRT1700C CONICAL 114 1000 70

KRT1700P PYRAMIDAL 114 1000 70

 HYDRAULIC BREAKER TOOLS 34
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HM85
1900
HM90
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

KRT1900E CHISEL 125 1100 95 HM85E CHISEL 62 600 11

KRT1900C CONICAL 125 1100 95 HM85C CONICAL 62 600 11

KRT1900P PYRAMIDAL 125 1100 95 HM85P PYRAMIDAL 62 600 11

1901 HM100
HM110
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

KRT1901E CHISEL 125 1100 95 HM100.110 GENERIC 65 700 17

KRT1901C CONICAL 125 1100 95

KRT1901P PYRAMIDAL 125 1100 95

HM130-140-150

KRUPP® PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM45 HM130E CHISEL 65 770 18

HM130C CONICAL 65 770 18

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) HM130P PYRAMIDAL 65 770 18

HM45E CHISEL 42 450 5

HM45C CONICAL 42 450 5 HM185

HM45P PYRAMIDAL 42 450 5
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM55 HM185E CHISEL 75 780 23

HM185C CONICAL 75 780 23

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) HM185P PYRAMIDAL 75 780 23

HM55E CHISEL 45 580 7 HM185M BLUNT 75 780 23

HM55C CONICAL 45 580 7

HM55P PYRAMIDAL 45 580 7 HM200

PN USCO PROFILE Ø L WEIGHT

HM60V REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM200E CHISEL 80 850 32

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) HM200C CONICAL 80 850 32

HM60VE CHISEL 48 500 6 HM200P PYRAMIDAL 80 850 32

HM60VC CONICAL 48 500 6

HM60VP PYRAMIDAL 48 500 6

HM220-230

PN USCO PROFILE Ø L WEIGHT

HM60-75 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

HM220E CHISEL 80 850 32

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) HM220C CONICAL 80 850 32

HM75E CHISEL 55 590 10 HM220P PYRAMIDAL 80 850 32

HM75C CONICAL 55 590 10

HM75P PYRAMIDAL 55 590 10

35
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HM300 HM700

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM300E CHISEL 80 900 39 HM700E CHISEL 115 1140 80

HM300C CONICAL 80 900 39 HM700C CONICAL 115 1140 80

HM300P PYRAMIDAL 80 900 39 HM700P PYRAMIDAL 115 1140 80

HM700M BLUNT 115 1140 80

HM350V
HM710-720
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
HM350VE CHISEL 90 900 39 REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM350VC CONICAL 90 900 39 HM710E CHISEL 115 1070 72

HM350VP PYRAMIDAL 90 900 39 HM710C CONICAL 115 1070 72

HM710P PYRAMIDAL 115 1070 72

HM400
HM780
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
HM400E CHISEL 80 850 30 REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM400C CONICAL 80 850 30
HM780E CHISEL 120 1100 89
HM400P PYRAMIDAL 80 850 30
HM780C CONICAL 120 1100 89

HM780P PYRAMIDAL 120 1100 89

HM550-560 HM780M BLUNT 120 1100 89

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) HM800
HM550E CHISEL 100 980 54
PN USCO PROFILE Ø L WEIGHT
HM550C CONICAL 100 980 54
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM550P PYRAMIDAL 100 980 54
HM800E CHISEL 135 1150 110

HM800C CONICAL 135 1150 110

HM580 HM800P PYRAMIDAL 135 1150 110

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) HM900
HM580E CHISEL 100 1000 55

HM580C CONICAL 100 1000 55 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM580P PYRAMIDAL 100 1000 55
HM900E CHISEL 135 1150 113

HM900C CONICAL 135 1150 113

HM600 HM900P PYRAMIDAL 135 1150 113

HM900M BLUNT 135 1150 113

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM600E CHISEL 100 1000 56

HM600C CONICAL 100 1000 56

HM600P PYRAMIDAL 100 1000 56

 HYDRAULIC BREAKER TOOLS 36
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

HM950 HM1800-2000

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM950 CHISEL 135 1100 107 HM2000E CHISEL 160 1300 180

HM950E CONICAL 135 1100 107 HM2000C CONICAL 160 1300 180

HM950C PYRAMIDAL 135 1100 107 HM2000P PYRAMIDAL 160 1300 180

HM950M BLUNT 135 1100 107 HM2000M BLUNT 160 1300 180

HM960 HM2100-1300

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

HM960E CHISEL 135 1142 107 HM2100L CHISEL 165 1350 194

HM960C CONICAL 135 1142 107

HM960P PYRAMIDAL 135 1142 107 HM2100

HM1000M PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT HM2100E CHISEL 165 1350 194

REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM2100C CONICAL 165 1350 194
HM100ME CHISEL 140 1200 126
HM2100P PYRAMIDAL 165 1350 194
HM1000MC CONICAL 140 1200 126
HM2010M BLUNT 165 1350 194
HM1000MP PYRAMIDAL 140 1200 126

HM1000MM BLUNT 140 1200 126

HM2500

HM1200 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT HM2500E CHISEL 180 1500 290

REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM2500C CONICAL 180 1500 290
HM1200 CHISEL 150 1250 150
HM2500M BLUNT 180 1500 290

HM1300
HM1500 HM3000M

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM1500E CHISEL 150 1250 145
HM900ME CHISEL 200 1600 339
HM1500C CONICAL 150 1250 145
HM900MP PYRAMIDAL 200 1600 339
HM1500P PYRAMIDAL 150 1250 145

HM4000
HM1500MARATHON
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
HM4000E CHISEL 210 1800 430
HM1500MM BLUNT 150 1250 151
HM4000P CONICAL 210 1800 430
HM1500ME CHISEL 150 1250 151

HM1500MP PYRAMIDAL 150 1250 151

HM1500MC CONICAL 150 1250 151

37
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

KUBOTA® MONTABERT®

KXB300-350 SC06

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

KXB300.350 GENERIC 40 400 4 SC06E CHISEL 37 440 4

SC06C CONICAL 37 440 4

SC06P PYRAMIDAL 37 440 4

KM55

PN USCO PROFILE Ø L WEIGHT

(mm)
BRP30
REFERENCIA USCO PERFIL (mm) (kg)

KM55 GENERIC 40 420 -

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRP30E CHISEL 40 420 4

KM100
BRP30C CONICAL 40 420 4
PN USCO PROFILE Ø L WEIGHT BRP30P PYRAMIDAL 40 420 4
REFERENCIA USCO PERFIL (mm) (mm) (kg)

KM100 GENERIC 45 510 7

SC08

KXB400 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT SC08E CHISEL 42 450 5

REFERENCIA USCO PERFIL (mm) (mm) (kg)
SC08C CONICAL 42 450 5
KXB400 GENERIC 45 500 6
SC08P PYRAMIDAL 42 450 5

KXB450
SC12
PN USCO PROFILE Ø L WEIGHT
(mm)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KXB450 GENERIC 50 510 7
SC12E CHISEL 44 480 6

SC12C CONICAL 44 480 6

KXB500 SC12P PYRAMIDAL 44 480 6

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) BRH40
KXB500 GENERIC 63 680 15
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
KXB600 BRH40E CHISEL 45 500 5

BRH40C CONICAL 45 500 5

PN USCO PROFILE Ø L WEIGHT
BRH40P PYRAMIDAL 45 500 5
REFERENCIA USCO PERFIL (mm) (mm) (kg)

KXB600 GENERIC 70 730 21

BRP45
BRP50
KM300
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
BRP45E.50 BLUNT 50 520 7
REFERENCIA USCO PERFIL (mm) (mm) (kg)
BRP45C.50 CHISEL 50 520 7
HM1500MM GENERIC 80 800 28
BRP45P.50 PYRAMIDAL 50 520 7
 HYDRAULIC BREAKER TOOLS 38
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

BRP60 BRP130-140-150

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRP60E CHISEL 50 540 8 BRP130E CHISEL 74 740 23

BRP60C CONICAL 50 540 8 BRP130P PYRAMIDAL 74 740 23

BRP60P PYRAMIDAL 50 540 8

125SX
SC16
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) 125SXE CHISEL 74 740 23

SC16E CHISEL 54 550 10 125SXC CONICAL 74 740 23

SC16C CONICAL 54 550 10 125XP PYRAMIDAL 74 740 23

SC16P PYRAMIDAL 54 550 10

SC36
BRH75-76-91
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) SC36E CHISEL 78 710 24

BRH75E.76.91 CHISEL 60 550 10 SC36C CONICAL 78 710 24

BRH75C.76.91 CONICAL 60 550 10 SC36P PYRAMIDAL 78 710 24

BRH75P.76.91 PYRAMIDAL 60 550 10

BRH125
SC22
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) BRH125E CHISEL 80 750 21

SC22E CHISEL 62 600 15 BRH125C CONICAL 80 750 21

SC22C CONICAL 62 600 15 BRH125P PYRAMIDAL 80 750 21

SC22P PYRAMIDAL 62 600 15 BRH125M BLUNT 80 750 21

BRH250
BRP100-85-95

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

(mm) REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (kg)

BRP100E CHISEL 62 600 14 BRH250E CHISEL 95 850 41

BRP100C CONICAL 62 600 14 BRH250C CONICAL 95 850 41

BRP100P PYRAMIDAL 62 600 14 BRH250P PYRAMIDAL 95 850 41

BRH250M BLUNT 95 850 41

SC28
M300
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
SC28E CHISEL 69 660 18
M300E CHISEL 95 850 41
SC28C CONICAL 69 660 18
M300C CONICAL 95 850 41
SC28P PYRAMIDAL 69 660 18
M300P PYRAMIDAL 95 850 41
39
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

V32(BRV32)
M600
V1200
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

M600E CHISEL 105 930 80 V32E.BRV32 CHISEL 122 1100 89

M600P PYRAMIDAL 105 930 80 V32C.BRV32 CONICAL 122 1100 89

V32P.BRV32 PYRAMIDAL 122 1100 89

V32M.BRV32 BLUNT 122 1100 89

M700

PN USCO PROFILE Ø L WEIGHT SC42

REFERENCIA USCO PERFIL (mm) (mm) (kg)

M700E CHISEL 112 950 68

PN USCO PROFILE Ø L WEIGHT
M700C CONICAL 112 950 68 REFERENCIA USCO PERFIL (mm) (mm) (kg)

M700P PYRAMIDAL 112 950 68 SC42E CHISEL 85 780 35

SC42C CONICAL 85 780 35

BRH501 SC42P PYRAMIDAL 85 780 35

PN USCO PROFILE Ø L WEIGHT

BRH1100
REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRH501P PYRAMIDAL 114 1000 70

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRH1100E CHISEL 140 1340 135

BRH620
BRH1100C CONICAL 140 1340 135

PN USCO PROFILE Ø L WEIGHT BRH110P PYRAMIDAL 140 1340 135

REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRH620E CHISEL 114 1000 70

V600
BRH620C CONICAL 114 1000 70 BRV600
BRH620P PYRAMIDAL 114 1000 70
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

M900 V600E.BRV1600 CHISEL 140 1200 126

BRH625 V600C.BRV1600 CONICAL 140 1200 126
PN USCO PROFILE Ø L WEIGHT V600P.BRV1600 PYRAMIDAL 140 1200 126
REFERENCIA USCO PERFIL (mm) (mm) (kg)
V600M.BRV1600 BLUNT 140 1200 126
M900E.BRH625 CHISEL 118 1000 75

M900C.BRH625 CONICAL 118 1000 75

M900P.BRH625 PYRAMIDAL 118 1000 75

V1800
M900M.BRH625 BLUNT 118 1000 75
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

V1800E CHISEL 140 1300 145

BRH750
V1800P PYRAMIDAL 140 1300 145

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRH750E CHISEL 120 1100 80

BRH750C CONICAL 120 1100 80

BRH750P PYRAMIDAL 120 1100 80

BRH750M BLUNT 120 1100 80

 HYDRAULIC BREAKER TOOLS 40
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

V43 V55
BRV43 BRV55
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

V43E.BRV43 CHISEL 150 1250 150 V55E.BRV55 CHISEL 170 1450 230

V43C.BRV43 CONICAL 150 1250 150 V55C.BRV55 CONICAL 170 1450 230

V43P.BRV43 PYRAMIDAL 150 1250 150 V55P.BRV55 PYRAMIDAL 170 1450 230

V43M.BRV43 BLUNT 150 1250 150 V55M.BRV55 BLUNT 170 1450 230

V45 V65
BRV45 BRV65
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

V45E.BRV45 CHISEL 150 1300 150 V65E.BRV65 CHISEL 202 1800 420

V45C.BRV45 CONICAL 150 1300 150 V65P.BRV65 PYRAMIDAL 202 1800 420

V45P.BRV45 PYRAMIDAL 150 1300 150

MSB®
V2500
MSB200
PN USCO PROFILE Ø L WEIGHT
(mm) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
V2500E CHISEL 160 1500 177
MSB200E CHISEL 70 680 19
V2500C CONICAL 160 1500 177
MSB200P PYRAMIDAL 70 680 19
V2500P PYRAMIDAL 160 1500 177

V2500M BLUNT 160 1500 177

MSB250

V52 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT MSB250E CHISEL 75 730 26

REFERENCIA USCO PERFIL (mm) (mm) (kg)
MSB250P CONICAL 75 730 26
[Link] CHISEL 162 1350 200

[Link] CONICAL 162 1350 200

MSB300
[Link] PYRAMIDAL 162 1350 200

PN USCO PROFILE Ø L WEIGHT

V53 REFERENCIA USCO PERFIL (mm) (mm) (kg)

BRV53 MSB300E CHISEL 85 790 34

PN USCO PROFILE Ø L WEIGHT MSB300P PYRAMIDAL 85 790 34

REFERENCIA USCO PERFIL (mm) (mm) (kg)
MSB300C CONICAL 85 790 34
V53E.BRV53 CHISEL 170 1500 251
MSB300M BLUNT 85 790 34
V53C.BRV53 CONICAL 170 1500 251

V53P.BRV53 PYRAMIDAL 170 1500 251

MSB400

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MSB400E CHISEL 95 905 46

MSB400P PYRAMIDAL 95 905 46

41
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

MSB450 MSB800

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MSB450E CHISEL 100 920 51 MSB800E CHISEL 160 1300 205

MSB450C CONICAL 100 920 51 MSB800C CONICAL 160 1300 205

MSB450P PYRAMIDAL 100 920 51 MSB800P PYRAMIDAL 160 1300 205

MSB450M BLUNT 100 920 51 MSB800M BLUNT 160 1300 205

MSB500 MSB900

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MSB500E CHISEL 110 1050 79 MSB900E CHISEL 170 1450 238

MSB500C CONICAL 110 1050 79 MSB900C CONICAL 170 1450 238

MSB500P PYRAMIDAL 110 1050 79 MSB900P PYRAMIDAL 170 1450 238

MSB500M BLUNT 110 1050 79

MSB1000
MSB550
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) MSB1000E CHISEL 180 1700 300

MSB550E CHISEL 120 1100 90 MSB1000P PYRAMIDAL 180 1700 300

MSB550C CONICAL 120 1100 90

MSB550P PYRAMIDAL 120 1100 90 MSB.75AT

MSB550M BLUNT 120 1100 90
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
MSB600
MSB75ATE CHISEL 205 - -

MSB75ATP CONICAL 205 - -

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

MSB600E CHISEL 130 1100 115

MTB®
MSB600C CONICAL 130 1100 115
MTB34-35-36
MSB600P PYRAMIDAL 130 1100 115

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
MSB700
MTB34.35.36 GENERIC 75 730 26

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
MTB45
MSB700E CHISEL 140 1200 146

MSB700P PYRAMIDAL 140 1200 146 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MTB45 GENERIC 85 790 34

 HYDRAULIC BREAKER TOOLS 42
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

MTB120 E200
GH6
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MTB120 GENERIC 110 1050 79 NPKE200E CHISEL 42 480 5

NPKE200C CONICAL 42 480 5

MTB170 NPKE200P PYRAMIDAL 42 480 5

PN USCO PROFILE Ø L WEIGHT H08X

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MTB170 GENERIC 130 1200 115

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

MTB210 NPKH08XE CHISEL 45 500 6

NPKH08XC CONICAL 45 500 6

PN USCO PROFILE Ø L WEIGHT NPKH08XP PYRAMIDAL 45 500 6

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MTB210 GENERIC 140 1300 146

E201
GH7
MTB270-75 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT NPKE201E CHISEL 47 530 6

REFERENCIA USCO PERFIL (mm) (mm) (kg)
NPKE201C CONICAL 47 530 6
MTB270.75 GENERIC 160 1350 205
NPKE201P PYRAMIDAL 47 530 6

MTB360 H1XA

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
MTB360 GENERIC 170 1450 238 NPKH1XAE CHISEL 57 580 9

NPKH1XAC CONICAL 57 580 9

NPK® NPKH1XAP PYRAMIDAL 57 580 9

H06X
E202
GH1
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
NPKH06XC CONICAL 40 480 4
NPKE202E CHISEL 57 600 10

NPKE202C CONICAL 57 600 10

E106 NPKE202P PYRAMIDAL 57 600 10

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) H2XA

NPKE106E CHISEL 41 410 4 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
NPKE106P PYRAMIDAL 41 410 4
NPKH2XAE CHISEL 65 620 14

NPKH2XAC CONICAL 65 620 14

NPKH2XAP PYRAMIDAL 65 620 14

43
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

E203 H5X
GH2 H6X
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKGH2E CHISEL 66 650 15 NPKH5XE CHISEL 96 860 41

NPKGH2C CONICAL 66 650 15 NPKH5XC CONICAL 96 860 41

NPKGH2P PYRAMIDAL 66 650 15 NPKH5XP PYRAMIDAL 96 860 41

H3XA E206

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKH3XAE CHISEL 75 710 21 NPKE206E CHISEL 96 900 46

NPKH3XAC CONICAL 75 710 21 NPKE206C CONICAL 96 900 46

NPKH3XAP PYRAMIDAL 75 710 21 NPKE206P PYRAMIDAL 96 900 46

H3X E207
GH6
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKH3XC CONICAL 75 710 21 NPKE207E CHISEL 105 950 55

NPKE207C CONICAL 105 950 55

E204 NPKE207P PYRAMIDAL 105 950 55
GH3
PN USCO PROFILE Ø L WEIGHT H7X
REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE204E CHISEL 76 750 22

PN USCO PROFILE Ø L WEIGHT
NPKE204C CONICAL 76 750 22 REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE204P PYRAMIDAL 76 750 22 NPKH7XE CHISEL 106 920 51

NPKH7XC CONICAL 106 920 51

E205 NPKH7XP PYRAMIDAL 106 920 51
GH4
PN USCO PROFILE Ø L WEIGHT GH7
REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE205E CHISEL 86 850 31

PN USCO PROFILE Ø L WEIGHT
NPKE205C CONICAL 86 850 31 REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE205P PYRAMIDAL 86 850 31 NPKGH7E CHISEL 115 1150 77

NPKGH7C CONICAL 115 1150 77

H4X NPKGH7P PYRAMIDAL 115 1150 77

PN USCO PROFILE Ø L WEIGHT

H8XA
REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKH4XE CHISEL 90 800 32 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
NPKH4XC CONICAL 90 800 32
NPKH8XAE CHISEL 116 1010 69
NPKH4XP PYRAMIDAL 90 800 32
NPKH8XAC CONICAL 116 1010 69

NPKH8XAP PYRAMIDAL 116 1010 69

 HYDRAULIC BREAKER TOOLS 44
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

E208 H12XE

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE208E CHISEL 116 1150 85 NPKH12EE CHISEL 136 1200 115

NPKE208C CONICAL 116 1150 85 NPKH12EC CONICAL 136 1200 115

NPKE208P PYRAMIDAL 116 1150 85 NPKH12EP PYRAMIDAL 136 1200 115

H10XB E213

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKH10XBE CHISEL 126 1120 96 NPKE213E CHISEL 136 1200 115

NPKH10XBC CONICAL 126 1120 96 NPKE213C CONICAL 136 1200 115

NPKH10XBP PYRAMIDAL 126 1120 96 NPKE213P PYRAMIDAL 136 1200 115

E210 H15X
E215
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE210E CHISEL 126 1180 90 NPKH15XC CONICAL 136 1200 115

NPKE210C CONICAL 126 1180 90

NPKE210P PYRAMIDAL 126 1180 90 H16X

PN USCO PROFILE Ø L WEIGHT

E212 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

NPKH16XE CHISEL 146 1220 140

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) NPKH16XC CONICAL 146 1220 140

NPKE212E CHISEL 126 1200 97 NPKH16XP PYRAMIDAL 146 1220 140

NPKE212P CONICAL 126 1200 97

NPKE212C PYRAMIDAL 126 1200 97 E216

PN USCO PROFILE Ø L WEIGHT

GH9 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

NPKE216E CHISEL 146 1300 145

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) NPKE216C CONICAL 146 1300 145

NPKGH9E CHISEL 126 1200 95 NPKE215P PYRAMIDAL 146 1300 145

NPKGH9C CONICAL 126 1200 95 NPKE216M BLUNT 146 1300 145

NPKGH9M BLUNT 126 1200 95

NPKGH9P PYRAMIDAL 126 1200 95

E218

PN USCO PROFILE Ø L WEIGHT

GH10 REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE218E CHISEL 146 1300 140

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) NPKE218C CONICAL 146 1300 140

NPKGH10E CHISEL 135 1200 110 NPKE218P PYRAMIDAL 146 1300 140

NPKGH10C CONICAL 135 1200 110

NPKGH10P PYRAMIDAL 135 1200 110

45
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

GH12 GH18

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKGH12E CHISEL 146 1300 147 NPKGH18E CHISEL 165 1550 215

NPKGH12C CONICAL 146 1300 147 NPKGH18C CONICAL 165 1550 215

NPKGH12P PYRAMIDAL 146 1300 147 NPKGH18P PYRAMIDAL 165 1550 215

H24X H30X

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKH24XE GENERIC 155 1300 158 NPKH30XC CONICAL 175 1450 250

H20X E240

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKH20XC CONICAL 156 1400 158 NPKE240E CHISEL 184 1550 315

NPKE240C CONICAL 184 1550 315

E220 NPKE240P PYRAMIDAL 184 1550 315

PN USCO PROFILE Ø L WEIGHT OCM®

REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE220E CHISEL 156 1400 170 OCM8

NPKE220C CONICAL 156 1400 170

NPKE220P PYRAMIDAL 156 1400 170 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

OCM8 GENERIC 45 500 5

E225

PN USCO PROFILE Ø L WEIGHT OCM25

REFERENCIA USCO PERFIL (mm) (mm) (kg)

NPKE225E CHISEL 165 1600 269 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
NPKE225E CONICAL 165 1600 269
OCM25 GENERIC 80 750 21
NPKE225E PYRAMIDAL 165 1600 269

OCM55
GH15
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
OCM55 GENERIC 95 850 41
NPKGH15E CHISEL 156 1450 180

NPKGH15C CONICAL 156 1450 180

OCM100
NPKGH15P PYRAMIDAL 156 1450 180

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

OCM100 GENERIC 114 1000 70

 HYDRAULIC BREAKER TOOLS 46
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

OCM130 OKB304

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

OCM130 GENERIC 120 1100 80 OKB304 GENERIC 74 710 20

OKADA® OKB305
TOP60
UB8A2
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT OKB305 GENERIC 85 900 34
REFERENCIA USCO PERFIL (mm) (mm) (kg)

OKB8A2E CHISEL 98 950 49

OKB8A2C CONICAL 98 950 49

OKB306
OKB8A2P PYRAMIDAL 98 950 49
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

UB11A2 OKB306 GENERIC 85 900 30

PN USCO PROFILE Ø L WEIGHT OKB308

REFERENCIA USCO PERFIL (mm) (mm) (kg)
TOP100
OKB11A2E CHISEL 122 1100 83
PN USCO PROFILE Ø L WEIGHT
OKB11A2E CONICAL 122 1100 83 (mm)
REFERENCIA USCO PERFIL (mm) (kg)
OKB11A2E PYRAMIDAL 122 1100 83
OKB308 GENERIC 110 950 60

UB17A2 OKB310
OKB320
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
OKB17A2E CHISEL 140 1200 120
OKB310E CHISEL 122 1100 86
OKB17A2E CONICAL 140 1200 120
OKB310C CONICAL 122 1100 86
OKB17A2E PYRAMIDAL 140 1200 120
OKB310P PYRAMIDAL 122 1100 86

OKB302
TOP30.35 OKB312

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
OKB302 GENERIC 61 600 13 OKB312 GENERIC 130 1150 101

OKB303
OKB316
TOP45
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
TOP45BE CHISEL 68 710 17
OKB316E CHISEL 140 1200 127
TOP45BC CONICAL 68 710 17
OKB316C CONICAL 140 1200 127
TOP45BP PYRAMIDAL 68 710 17
OKB316P PYRAMIDAL 140 1200 127
47
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TOP200 P3PS

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

TOP200E CHISEL 125 1200 98 PMV3PMVSE CHISEL 46 500 6

TOP200C CONICAL 125 1200 98 PMV3PMVSP PYRAMIDAL 46 500 6

TOP200P PYRAMIDAL 125 1200 98

P4
TOP205
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PMV4E CHISEL 51 500 8

TOP205E CHISEL 134 1200 107 PMV4C CONICAL 51 500 8

TOP205C CONICAL 134 1200 107 PMV4P PYRAMIDAL 51 500 8

TOP205P PYRAMIDAL 134 1200 107

P6
TOP300
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg) PMV4E CHISEL 64 600 13
TOP300E CHISEL 155 1400 174 PMV4C CONICAL 64 600 13
TOP300C CONICAL 155 1400 174 PMV4PMV PYRAMIDAL 64 600 13
TOP300P PYRAMIDAL 155 1400 174

P12SH
OMAL®
PN USCO PROFILE Ø L WEIGHT
HB86 REFERENCIA USCO PERFIL (mm) (mm) (kg)

PMV12SH GENERIC 80 750 21

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD086016 CHISEL 45 460 6 P16SH

UEHD086026 CONICAL 45 460 6

OHB.86P PYRAMIDAL 45 460 6 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PMV16SH GENERIC 95 850 41

HB190

PN USCO PROFILE Ø L WEIGHT

P23SH
REFERENCIA USCO PERFIL (mm) (mm) (kg)

UEHD196020 CONICAL 60 600 12 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PMV23SH GENERIC 114 1000 70

PROMOVE®

P3SH P24

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

PMV3SH GENERIC 45 500 5 PMV24E CHISEL 119 1000 70

PMV24C CONICAL 119 1000 70

PMV24P PYRAMIDAL 119 1000 70

 HYDRAULIC BREAKER TOOLS 48
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

P27SH S23 (23N)

BR623
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

PMV27SH GENERIC 120 1100 80 S23E.BR623 CHISEL 63 680 15

S23C.BR623 CONICAL 63 680 15

RAMMER® (SANDVIK®) S23P.BR623 PYRAMIDAL 63 680 15

S23M.BR623 BLUNT 63 680 15

S18 (PICCOLO)

PN USCO PROFILE Ø L WEIGHT BR777

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 40 400 5 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 40 400 5
BR777E CHISEL 80 740 27,1
[Link] PYRAMIDAL 40 400 5
BR777P PYRAMIDAL 80 740 27,1

S21 BR777M BLUNT 80 740 27,1

BR321
PN USCO PROFILE Ø L WEIGHT
S25
REFERENCIA USCO PERFIL (mm) (mm) (kg) BR825
S21E.BR321 CHISEL 45 485 6 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
S21C.BR321 CONICAL 45 485 6
S25E.BR825 CHISEL 70 730 21
S21P.BR321 PYRAMIDAL 45 485 6
S25C.BR825 CONICAL 70 730 21
S21M.BR321 BLUNT 45 485 6
S25P.BR825 PYRAMIDAL 70 730 21

S22N S25M.BR825 BLUNT 70 730 21

BR422
PN USCO PROFILE Ø L WEIGHT S25 L1400
REFERENCIA USCO PERFIL (mm) (mm) (kg) BR825
S22NE.BR422 CHISEL 50 530 7 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
S22NC.BR422 CONICAL 50 530 7

S22NM.BR422 BLUNT 50 530 7 S25L.BR825 GENERIC 70 730 21

S22NP.BR422 PYRAMIDAL 50 530 7

S24
S20-22
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) [Link] CHISEL 72 730 24

S22E.2022 CHISEL 53 530 8 [Link] CONICAL 72 730 24

S22C.2022 CONICAL 53 530 8 [Link] PYRAMIDAL 72 730 24

S22P.2022 PYRAMIDAL 53 530 8

S22M.2022 BLUNT 53 530 8 S27 (BR927)

PN USCO PROFILE Ø L WEIGHT

BR555 REFERENCIA USCO PERFIL (mm) (mm) (kg)

S27E.BR927 CHISEL 84 840 34

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) S27CBR927 CONICAL 84 840 34

BR555E CHISEL 72 650 19,2 S27P.BR927 PYRAMIDAL 84 840 34

BR555P PYRAMIDAL 72 650 19,2

49
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

S26 E66 (S55)

BR2266
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 90 850 36 E66E.BR2266 CHISEL 115 1050 78

[Link] CONICAL 90 850 36 E66C.BR2266 CONICAL 115 1050 78

[Link] PYRAMIDAL 90 850 36 E66P.BR2266 PYRAMIDAL 115 1050 78

E66M.BR2266 BLUNT 115 1050 78

S29
BR1229
BR2155
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
S29E.BR1229 CHISEL 95 900 45 REFERENCIA USCO PERFIL (mm) (mm) (kg)

S29C.BR1229 CONICAL 95 900 45 BR2155E CHISEL 118 1050 83

S29P.BR1229 PYRAMIDAL 95 900 45 BR2155P PYRAMIDAL 118 1050 83

E64 E65
BR2064 BR2265
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
E64E.BR2064 CHISEL 106 1050 66
E65E.BR2265 CHISEL 125 1050 91
E64C.BR2064 CONICAL 106 1050 66
E65C.BR2265 CONICAL 125 1050 91
E64P.BR2064 PYRAMIDAL 106 1050 66
E65P.BR2265 PYRAMIDAL 125 1050 91

E65M.BR2265 BLUNT 125 1050 91

S52
M14
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 110 900 60
REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 110 900 60
[Link] CHISEL 125 1100 93
[Link] PYRAMIDAL 110 900 60
[Link] CONICAL 125 1100 93

[Link] PYRAMIDAL 125 1100 93

S54

PN USCO PROFILE Ø L WEIGHT

S56
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 115 1050 78
REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 115 1050 78
[Link] CHISEL 130 1100 99
[Link] PYRAMIDAL 115 1050 78
[Link] CONICAL 130 1100 99

[Link] PYRAMIDAL 130 1100 99

E63 [Link] BLUNT 130 1100 99

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 115 1000 70

[Link] CONICAL 115 1000 70

[Link] PYRAMIDAL 115 1000 70

 HYDRAULIC BREAKER TOOLS 50
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

E68 G88
BR2568
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

E68E.BR2568 CHISEL 130 1100 104 [Link] CHISEL 142 1200 128

E68C.BR2568 CONICAL 130 1100 104 [Link] CONICAL 142 1200 128

E68P.BR2568 PYRAMIDAL 130 1100 104 [Link] PYRAMIDAL 142 1200 128

[Link] BLUNT 142 1200 128

S82
S84
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 140 1200 136 REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] CONICAL 140 1200 136 [Link] CHISEL 160 1350 190
[Link] PYRAMIDAL 140 1200 136 [Link] CONICAL 160 1350 190

[Link] PYRAMIDAL 160 1350 190

S83 [Link] BLUNT 160 1350 190

PN USCO PROFILE Ø L WEIGHT G90

REFERENCIA USCO PERFIL (mm) (mm) (kg)
BR3890
[Link] CHISEL 140 1200 142
PN USCO PROFILE Ø L WEIGHT
[Link] CONICAL 140 1200 142 REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] PYRAMIDAL 140 1200 142
G90E.BR3890 CHISEL 160 1350 193
[Link] BLUNT 140 1200 142
G90E.BR3890 CONICAL 160 1350 193

G90E.BR3890 PYRAMIDAL 160 1350 193

G80 G90E.BR3890 BLUNT 160 1350 193

PN USCO PROFILE Ø L WEIGHT

G100
REFERENCIA USCO PERFIL (mm) (mm) (kg)
BR4510
[Link] CHISEL 140 1200 130
PN USCO PROFILE Ø L WEIGHT
[Link] CONICAL 140 1200 130
REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] PYRAMIDAL 140 1200 130
G100E.BR4510 CHISEL 170 1450 230
[Link] BLUNT 140 1200 130
G100C.BR4510 CONICAL 170 1450 230

G100P.BR4510 PYRAMIDAL 170 1450 230

M18 G100M.BR4510 BLUNT 170 1450 230

PN USCO PROFILE Ø L WEIGHT

(mm)
G110
REFERENCIA USCO PERFIL (mm) (kg)
BR4511
[Link] CHISEL 140 1200 130
PN USCO PROFILE Ø L WEIGHT
[Link] CONICAL 140 1200 130
REFERENCIA USCO PERFIL (mm) (mm) (kg)
[Link] PYRAMIDAL 140 1200 130
G110E.BR4511 CHISEL 174 1450 247

G110P.BR4511 PYRAMIDAL 174 1450 247

51
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

G120 OL90

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] GENERIC 195 1700 370 OL90E CHISEL 48 470 6

OL90C CONICAL 48 470 6

G130 OL90P PYRAMIDAL 48 470 6

PN USCO PROFILE Ø L WEIGHT OL95

REFERENCIA USCO PERFIL (mm) (mm) (kg)
OL100
[Link] CHISEL 203 1700 385
PN USCO PROFILE Ø L WEIGHT
[Link] PYRAMIDAL 203 1700 385 REFERENCIA USCO PERFIL (mm) (mm) (kg)

OL95E CHISEL 48 470 6

BR2577 OL95P PYRAMIDAL 48 470 6

PN USCO PROFILE Ø L WEIGHT OL130

REFERENCIA USCO PERFIL (mm) (mm) (kg)
OL160
BR2577E CHISEL 135 1120 112
PN USCO PROFILE Ø L WEIGHT
BR2577P PYRAMIDAL 135 1120 112 REFERENCIA USCO PERFIL (mm) (mm) (kg)

OL13OE CHISEL 54 500 9

BR4099 OL13OC CONICAL 54 500 9

OL13OP PYRAMIDAL 54 500 9

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
OL180
BR4099E CHISEL 166 1400 218
OL260
BR4099P PYRAMIDAL 166 1400 218
PN USCO PROFILE Ø L WEIGHT
BR4099M BLUNT 166 1400 218 REFERENCIA USCO PERFIL (mm) (mm) (kg)

OL180E CHISEL 68 550 14

BR5011 OL180C CONICAL 68 550 14

OL180P PYRAMIDAL 68 550 14

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
OL250
BR5011E CHISEL 190 1550 303
OL330
BR5011P PYRAMIDAL 190 1550 303
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

OL250E CHISEL 77 600 22

ROTAIR®
OL250C CONICAL 77 600 22

OL50 OL250P PYRAMIDAL 77 600 22

PN USCO PROFILE Ø L WEIGHT OL450

REFERENCIA USCO PERFIL (mm) (mm) (kg)

OLS50 GENERIC 36 400 3

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

OL450E CHISEL 82 720 26

OL450P PYRAMIDAL 82 720 26

 HYDRAULIC BREAKER TOOLS 52
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

SOCOMEC®

DMS50 DMS310
DMS330
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMS50E CHISEL 45 400 4 DMS310E CHISEL 72 700 17

DMS50P PYRAMIDAL 45 400 4 DMS310C CONICAL 72 700 17

DMS310P PYRAMIDAL 72 700 17

MDO55
DMS95 DMS410
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
DMS95E CHISEL 45 490 5 REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMS95C CONICAL 45 490 5 DMS410 GENERIC 80 750 26

DMS95P PYRAMIDAL 45 490 5

MDO500
DMS150
DMS160 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) MDO500E CHISEL 94 850 40
DMS150E CHISEL 55 500 9 MDO500P PYRAMIDAL 94 850 40
DMS150C CONICAL 55 500 9

DMS150P PYRAMIDAL 55 500 9

MDO550

DMS210 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT MDO550 GENERIC 95 900 43

REFERENCIA USCO PERFIL (mm) (mm) (kg)

DMS210E CHISEL 62 570 12 DMS680

DMS210C CONICAL 62 570 12 DMS740
DMS210P PYRAMIDAL 62 570 12 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

MDO100 DMS680E CHISEL 95 900 46

DMS220 DMS680P PYRAMIDAL 95 900 46

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
MDO750
MDO100 GENERIC 64 620 14

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
DMS260
MDO750E CHISEL 115 1100 78
DMS270
MDO750C CONICAL 115 1100 78
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) MDO750P PYRAMIDAL 115 1100 78

DMS260E CHISEL 67 670 15

DMS260C CONICAL 67 670 15

MDO900
DMS260P PYRAMIDAL 67 670 15

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MDO900 GENERIC 117 1000 72

53
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

MDO1450 SB40

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

MDO1450E CHISEL 130 1150 108 SB40E CHISEL 68 700 16

MDO1450P PYRAMIDAL 130 1150 108 SB40C CONICAL 68 700 16

SB40P PYRAMIDAL 68 700 16

MDO1950
SB43
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
MDO1950E CHISEL 140 1250 107 REFERENCIA USCO PERFIL (mm) (mm) (kg)

MDO1950P PYRAMIDAL 140 1250 107 SB43E CHISEL 75 650 20

SB43P PYRAMIDAL 75 650 20

SOOSAN®
SB45
SB10
PN USCO PROFILE Ø L WEIGHT
PN USCO PROFILE Ø L WEIGHT (mm)
REFERENCIA USCO PERFIL (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
SB45E CHISEL 85 800 36
SB10E CHISEL 40 400 4
SB45C CONICAL 85 800 36
SB10C CONICAL 40 400 4
SB45P PYRAMIDAL 85 800 36
SB10P PYRAMIDAL 40 400 4

SB20 SB50

PN USCO PROFILE Ø L WEIGHT

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
REFERENCIA USCO PERFIL (mm) (mm) (kg)
SB50E CHISEL 100 1000 55
SB20E CHISEL 45 500 6
SB50C CONICAL 100 1000 55
SB20C CONICAL 45 500 6
SB50P PYRAMIDAL 100 1000 55
SB20P PYRAMIDAL 45 500 6
SB50M BLUNT 100 1000 55

SB30
SB60
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
SB30 GENERIC 53 580 9
SB60E CHISEL 125 1100 92

SB60C CONICAL 125 1100 92

SB35
SB60P PYRAMIDAL 125 1100 92

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) SB80
SB35E CHISEL 60 550 11 SB81
SB35P PYRAMIDAL 60 550 11 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

SB81E CHISEL 140 1150 128

SB81C CONICAL 140 1150 128

SB81P PYRAMIDAL 140 1150 128

SB81M BLUNT 140 1150 128

 HYDRAULIC BREAKER TOOLS 54
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

SB100 MB156

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

SB100E CHISEL 150 1350 162 MB.156E CHISEL 45 450 5

SB100C CONICAL 150 1350 162 MB.156C CONICAL 45 450 5

SB100P PYRAMIDAL 150 1350 162 MB.156P PYRAMIDAL 45 450 5

SB100M BLUNT 150 1350 162

MB250-350-356
SB120
SB121 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) MB250E CHISEL 63 580 13

SB121E CHISEL 155 1300 184 MB250C CONICAL 63 580 13

SB121C CONICAL 155 1300 184 MB250P PYRAMIDAL 63 580 13

SB121P PYRAMIDAL 155 1300 184

SB121M BLUNT 155 1300 184

MB550

SB130 PN USCO PROFILE Ø L WEIGHT

SB140 REFERENCIA USCO PERFIL (mm) (mm) (kg)

PN USCO PROFILE Ø L WEIGHT MB550E CHISEL 70 700 18

REFERENCIA USCO PERFIL (mm) (mm) (kg) MB550C CONICAL 70 700 18
SB130E CHISEL 165 1500 192 MB550P PYRAMIDAL 70 700 18
SB130C CONICAL 165 1500 192

SB130P PYRAMIDAL 165 1500 192 STAR HAMMER®

SB130M BLUNT 165 1500 192
SH90

SB151 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
SH90P PYRAMIDAL 45 500 5
REFERENCIA USCO PERFIL (mm) (mm) (kg)

SB151E CHISEL 175 1600 270

SB151C CONICAL 175 1600 270 SH91

SB151P PYRAMIDAL 175 1600 270
PN USCO PROFILE Ø L WEIGHT
SB151M BLUNT 175 1600 270
REFERENCIA USCO PERFIL (mm) (mm) (kg)

SH91E CHISEL 46 500 6

STANLEY® SH91C CONICAL 46 500 6

SH91P PYRAMIDAL 46 500 6

MB125

PN USCO PROFILE Ø L WEIGHT SH151

REFERENCIA USCO PERFIL (mm) (mm) (kg)

MB.125E CHISEL 44 420 5 PN USCO PROFILE Ø L WEIGHT

MB.125C CONICAL 44 420 5 REFERENCIA USCO PERFIL (mm) (mm) (kg)

MB.125P PYRAMIDAL 44 420 5 SH151E CHISEL 56 530 9

SH151C CONICAL 56 530 9

SH151P PYRAMIDAL 56 530 9

55
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

SH200 SH1400

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

SH200E CHISEL 67 565 14 SH1400 GENERIC 120 1100 80

SH200E CONICAL 67 565 14

SH200E PYRAMIDAL 67 565 14 SH1402

PN USCO PROFILE Ø L WEIGHT

SH281 (mm)
REFERENCIA USCO PERFIL (mm) (kg)

SH1402E CHISEL 120 1150 90

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) SH1402P PYRAMIDAL 120 1150 90

SH281E CHISEL 80 640 21

SH281C CONICAL 80 640 21 TABE®

SH281P PYRAMIDAL 80 640 21
AGB75

SH561
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
AGB75E CHISEL 42 400 4
REFERENCIA USCO PERFIL (mm) (mm) (kg)
AGB75C CONICAL 42 400 4
SH561E CHISEL 105 950 57
AGB75P PYRAMIDAL 42 400 4
SH561C CONICAL 105 950 57

SH561P PYRAMIDAL 105 950 57

SH991 AGB100-175-200

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)
SH991E CHISEL 114 1000 70 AGB200E CHISEL 50 450 6
SH991C CONICAL 114 1000 70 AGB200C CONICAL 50 450 6
SH991P PYRAMIDAL 114 1000 70 AGB200P PYRAMIDAL 50 450 6

SH992 AGB275-350-370

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
SH992E CHISEL 114 1100 70 AGB350E CHISEL 65 610 14
SH992C CONICAL 114 1100 70 AGB350C CONICAL 65 610 14

AGB350P PYRAMIDAL 65 610 14

SH1401
AGB400
PN USCO PROFILE Ø L WEIGHT AGB475
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
SH1401C CONICAL 119 1150 90 REFERENCIA USCO PERFIL (mm) (mm) (kg)

AGB400E CHISEL 85 700 27

AGB400C CONICAL 85 700 27

AGB400P PYRAMIDAL 85 700 27

 HYDRAULIC BREAKER TOOLS 56
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

AGB575 AGB1800
AGB2000
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

AGB575 GENERIC 90 900 39 AGB1800E CHISEL 135 1100 105

AGB1800C CONICAL 135 1100 105

AGB700-701-750 AGB1800P PYRAMIDAL 135 1100 105

PN USCO PROFILE Ø L WEIGHT AGB2800

REFERENCIA USCO PERFIL (mm) (mm) (kg)

AGB700E CHISEL 105 850 51

PN USCO PROFILE Ø L WEIGHT
AGB700C CONICAL 105 850 51 REFERENCIA USCO PERFIL (mm) (mm) (kg)

AGB700P PYRAMIDAL 105 850 51 AGB2800E CHISEL 150 1200 152

AGB2800c CONICAL 150 1200 152

AGB1300 AGB2800p PYRAMIDAL 150 1200 152
AGB1301
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
AGB20
AGB1300E CHISEL 114 1000 70
PN USCO PROFILE Ø L WEIGHT
AGB1300C CONICAL 114 1000 70 REFERENCIA USCO PERFIL (mm) (mm) (kg)
AGB1300P PYRAMIDAL 114 1000 70 AGB20E CHISEL 150 1350 157

AGB20C CONICAL 150 1350 157

AGB12 AGB20P PYRAMIDAL 150 1350 157

AGB20M BLUNT 150 1350 157

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

AGB12E CHISEL 120 1110 89 AGB30

AGB12C CONICAL 120 1110 89
PN USCO PROFILE Ø L WEIGHT
AGB12E PYRAMIDAL 120 1110 89 REFERENCIA USCO PERFIL (mm) (mm) (kg)

AGB30R BLUNT 165 1500 200

AGB1600
AGB1620
TAKEUCHI® / TOYO®
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
TKB51
AGB1600E CHISEL 130 1150 104

AGB1600E CONICAL 130 1150 104 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
AGB1600E PYRAMIDAL 130 1150 104
TKB51E CHISEL 42 400 4

AGB15 TKB51C CONICAL 42 400 4

AGB16 TKB51P PYRAMIDAL 42 400 4

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
TKB71
AGB16E CHISEL 134 1210 118

AGB16C CONICAL 134 1210 118 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
AGB16P PYRAMIDAL 134 1210 118

AGB16M BLUNT 134 1210 118 TKB71E CHISEL 45 450 5

TKB71C CONICAL 45 450 5

TKB71P PYRAMIDAL 45 450 5

57
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TKB101 TKB1600
THBB101 THBB1600
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

TKB101E CHISEL 57 550 7 TKB1600E CHISEL 137 1150 114

TKB101C CONICAL 57 550 7 TKB1600P PYRAMIDAL 137 1150 114

TKB101P PYRAMIDAL 57 550 7

TKB2000
TKB301 THBB2000
THBB301 PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) TKB2000E CHISEL 150 1250 165

TKB301E CHISEL 70 750 20 TKB2000P PYRAMIDAL 150 1250 165

TKB301C CONICAL 70 750 20

TKB301P PYRAMIDAL 70 750 20 THBB5000

TKB401 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
THBB401
Ø THBB5000C CONICAL 180 1700 308
PN USCO PROFILE L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TKB401E CHISEL 80 900 32 TECNA®

TKB401C CONICAL 80 900 32

TKB401P PYRAMIDAL 80 900 32 HF15

PN USCO PROFILE Ø L WEIGHT

TKB801 (mm)
REFERENCIA USCO PERFIL (mm) (kg)
THBB801
[Link] GENERIC 40 450 4
PN USCO PROFILE Ø L WEIGHT
[Link] CHISEL 40 450 4
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TKB801E CHISEL 100 960 51

HF40
TKB801P PYRAMIDAL 100 960 51
HF45
PN USCO PROFILE Ø L WEIGHT
TKB1101 REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] GENERIC 56 600 10

PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TKB1101E CHISEL 120 1150 93 HF50

TKB1101P PYRAMIDAL 120 1150 93
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
TKB1400
[Link] CHISEL 73 720 21
THBB1400
[Link] CONICAL 73 720 21
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)

TKHB1400 GENERIC 137 1150 120 HF80

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

[Link] CHISEL 80 700 22

 HYDRAULIC BREAKER TOOLS 58
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TOKU®
TNB08 TNB7E-8
TNB08M
PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)

TNB08E CHISEL 40 450 4 TNB7E.8E CHISEL 115 1000 70

TNB08P PYRAMIDAL 40 450 4

TNB16E
TNB1E TNB14
TNB2M PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) TNB16EE CHISEL 135 1200 120

TNB1EE CHISEL 50 495 5 TNB16EC CONICAL 135 1200 120

TNB1EC CONICAL 50 495 5 TNB16EP PYRAMIDAL 135 1200 120

TNB1EP PYRAMIDAL 50 495 5

TNB150
TNB2E
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg) TNB150E CHISEL 135 1180 130

TNB2E GENERIC 58 620 11 TNB150P PYRAMIDAL 135 1180 130

TNB3E TNB190

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) REFERENCIA USCO PERFIL (mm) (mm) (kg)
TNB3EE CHISEL 64 640 15 TNB190E CHISEL 140 1180 130
TNB3EP PYRAMIDAL 64 640 15 TNB190P PYRAMIDAL 140 1180 130

TNB4E TNB220

PN USCO PROFILE Ø L WEIGHT PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) (mm)
REFERENCIA USCO PERFIL (mm) (kg)
TNB4E GENERIC 75 740 23 TNB220E CHISEL 146 1180 150

TNB220P PYRAMIDAL 146 1180 150

TNB6E
TNB230
PN USCO PROFILE Ø L WEIGHT
REFERENCIA USCO PERFIL (mm) (mm) (kg)
PN USCO PROFILE Ø L WEIGHT
TNB6E GENERIC 95 880 40 REFERENCIA USCO PERFIL (mm) (mm) (kg)

TNB230E CHISEL 146 1180 150

TNB100 TNB230P PYRAMIDAL 146 1180 150

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg) TNB310

TNB100E CHISEL 115 930 67 PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)
TNB100E PYRAMIDAL 115 930 67
TNB310E CHISEL 160 1360 195

TNB310P PYRAMIDAL 160 1360 195

59
HYDRAULIC BREAKER TOOLS
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI

TNB400

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

TNB400E CHISEL 178 1540 280

TNB400P PYRAMIDAL 178 1540 280

VISTARINI®

VH90

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

VH90E CHISEL 45 500 3

VH90C CONICAL 45 500 3

VH90EP PYRAMIDAL 45 500 3

VH120

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

VH120E CHISEL 48 520 6

VH120C CONICAL 48 520 6

VH120P PYRAMIDAL 48 520 6

VH220

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

VH220E CHISEL 65 620 18

VH220C CONICAL 65 620 18

VH220P PYRAMIDAL 65 620 18

VH160

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

VH160E CHISEL 67 600 11

VH160C CONICAL 67 600 11

VH160P PYRAMIDAL 67 600 11

VH380

PN USCO PROFILE Ø L WEIGHT

REFERENCIA USCO PERFIL (mm) (mm) (kg)

VH380E CHISEL 70 620 16

VH380P PYRAMIDAL 70 620 16

 HYDRAULIC BREAKER TOOLS 60
PUNTEROS PARA MARTILLOS HIDRÁULICOS
PUNTE PER MARTELLI IDRAULICI
Release M.16.F