0% found this document useful (0 votes)
370 views3 pages

5 NPX 1006 F

5npx1006f

Uploaded by

thesantander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
370 views3 pages

5 NPX 1006 F

5npx1006f

Uploaded by

thesantander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

5NPX1006F

10-port multibeam antenna, 10x 1710–2180 MHz, 5x 10-14° HPBW,


fixed electrical tilt

This product will be discontinued on: November 30, 2024


Replaced By:

6V-10M-F6 12-port multibeam antenna, 12x 1695–2690 MHz, 6x 10-14° HPBW, fixed electrical tilt

6VV-10A-F6 24-port multibeam antenna, 24x 1695–2690 MHz, 6x 10-14° HPBW, fixed electrical tilt, 1.3m length

General Specifications
Antenna Type Multibeam

Band Single band

Color Light Gray (RAL 7035)

Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket

Performance Note Outdoor usage

Radome Material ASA, UV stabilized

Radiator Material Brass | Low loss circuit board

Reflector Material Aluminum

RF Connector Interface 7-16 DIN Female

RF Connector Location Bottom

RF Connector Quantity, high band 10

RF Connector Quantity, total 10

Dimensions
Width 864 mm | 34.016 in

Depth 202 mm | 7.953 in

Length 889 mm | 35 in

Net Weight, without mounting kit 29.5 kg | 65.036 lb

Electrical Specifications
Impedance 50 ohm
Page 1 of 3

©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: March 26, 2024
5NPX1006F
Operating Frequency Band 1710 – 2180 MHz

Polarization ±45°

Electrical Specifications
Frequency Band, MHz 1710–1920 1920–2180
Gain, dBi 21.7 22.3
Beamwidth, Horizontal, degrees 13 12
Beamwidth, Vertical, degrees 11.9 10.9
Beam Tilt, degrees 6 6
USLS (First Lobe), dB 14 16
Front-to-Back Ratio at 180°, dB 32 34
CPR at Boresight, dB 10 10
Isolation, Same Beam, dB 25 25
VSWR | Return loss, dB 1.43 | 15.0 1.43 | 15.0

PIM, 3rd Order, 2 x 20 W, dBc -150 -150


Input Power per Port, maximum, watts 300 300

Electrical Specifications, BASTA


Frequency Band, MHz 1710–1920 1920–2180
Gain by all Beam Tilts, average, dBi 20.7 21.3
Gain by all Beam Tilts Tolerance, dB ±2 ±1.7
Beamwidth, Horizontal Tolerance, degrees ±2.1 ±1.7
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.7
USLS, beampeak to 20° above beampeak, 17 18
dB
Front-to-Back Total Power at 180° ± 30°, dB 30 32
CPR at Boresight, dB 9 10

Mechanical Specifications
Wind Loading @ Velocity, frontal 931.0 N @ 150 km/h (209.3 lbf @ 150 km/h)

Wind Speed, maximum 250 km/h (155 mph)

Packaging and Weights


Width, packed 977 mm | 38.465 in

Depth, packed 349 mm | 13.74 in

1038 mm | 40.866 in Page 2 of 3

©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: March 26, 2024
5NPX1006F
Length, packed 1038 mm | 40.866 in

Weight, gross 46.5 kg | 102.515 lb

Regulatory Compliance/Certifications
Agency Classification
CE Compliant with the relevant CE product directives
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
UK-ROHS Compliant

Included Products
T-045-GL-E – Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (60-115mm) OD round members for panel
antennas. Includes 2 clamp sets.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

Page 3 of 3

©2024 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its
affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names,
trademarks and registered trademarks are property of their respective owners. Revised: March 26, 2024

You might also like