0% found this document useful (0 votes)
119 views8 pages

F200 Adsorbent Safety Data Sheet

F200 datasheet

Uploaded by

ingif111
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
119 views8 pages

F200 Adsorbent Safety Data Sheet

F200 datasheet

Uploaded by

ingif111
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

www.DeltaAdsorbents.

com 630-980-5205

Safety Data Sheet


F200 1/8"
Revision date : 2011/06/23 Page: 1/7
Version: 4.1 (30500621/SDS_GEN_US/EN)

1. Product and Company Identification

Use: Adsorbent for the chemical industry

Company 24 Hour Emergency Response Information


BASF CORPORATION CHEMTREC: 1-800-424-9300
100 Campus Drive BASF HOTLINE: 1-800-832-HELP
Florham Park, NJ 07932, USA

2. Hazards Identification
Emergency overview

CAUTION:
May be harmful if inhaled.
May cause difficulty breathing.
Inhalation of dust may result in respiratory irritation.
Prolonged and repeated exposure of dust may cause lung damage.
Contact with the eyes or skin may cause mechanical irritation.
Avoid inhalation of dusts.
Avoid contact with the skin, eyes and clothing.

State of matter: solid


Colour: off-white
Odour: odourless

Potential health effects

Primary routes of exposure:


Routes of entry for solids and liquids include eye and skin contact, ingestion and inhalation. Routes of entry for
gases include inhalation and eye contact. Skin contact may be a route of entry for liquified gases.

Acute toxicity:
Virtually nontoxic after a single skin contact. Virtually nontoxic by inhalation. Virtually nontoxic after a single
ingestion.

Irritation / corrosion:
Inhalation of dust may cause respiratory tract irritation, coughing and breathing difficulties. Contact with the eyes
or skin may cause mechanical irritation. The product has not been tested. The statement has been derived from
the properties of the individual components.
www.DeltaAdsorbents.com 630-980-5205

Chronic toxicity:
www.DeltaAdsorbents.com 630-980-5205

Repeated dose toxicity: Prolonged and repeated exposure of dust may cause lung damage. The product has
not been tested. The statement has been derived from the properties of the individual components.

Potential environmental effects

Degradation / environmental fate:


Inorganic product which cannot be eliminated from water by biological purification processes.

3. Composition / Information on Ingredients


CAS Number Content (W/W) Chemical name
1344-28-1 94.0 - 100.0 % Aluminum oxide

4. First-Aid Measures
General advice:
Remove contaminated clothing.

If inhaled:
Keep patient calm, remove to fresh air. If necessary, give oxygen. If not breathing, give artificial respiration.
Seek medical attention if necessary.

If on skin:
After contact with skin, wash immediately with plenty of water and soap. Consult a doctor if skin irritation
persists.

If in eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Immediate
medical attention required.

If swallowed:
No hazards anticipated. If large quantities are ingested, seek medical advice.

Note to physician
Treatment: Treat according to symptoms (decontamination, vital functions), no known
specific antidote.

5. Fire-Fighting Measures
Flash point: Non-flammable.
Autoignition: not applicable
Lower explosion limit: not applicable
Upper explosion limit: not applicable
Flammability: does not ignite
Self-ignition temperature: not self-igniting
Additional information:
Use extinguishing measures to suit surroundings.

Hazards during fire-fighting:

No particular hazards known.

Protective equipment for fire-fighting:


Wear self-contained breathing apparatus and chemical-protective clothing.

Impact Sensitivity:
Remarks: Based on the chemical structure there is no shock-sensitivity.
www.DeltaAdsorbents.com 630-980-5205

6. Accidental release measures


Personal precautions:
Avoid dust formation. Avoid contact with the skin, eyes and clothing. Use personal protective clothing.
Information regarding personal protective measures see, chapter 8.

Environmental precautions:
Prevent spread over a wide area (e.g. by containment or oil barriers). Do not discharge into drains/surface
waters/groundwater. Contain contaminated water/firefighting water.

Cleanup:
Vacuum up spilled product. Place into suitable container for disposal.

7. Handling and Storage


Handling
General advice:
Avoid dust formation in confined areas. Avoid contact with the skin, eyes and clothing. Ensure adequate
ventilation.

Protection against fire and explosion:


Product is not explosive.

Storage
General advice:
Keep container tightly closed in a cool, well-ventilated place.

Storage incompatibility:
General advice: Segregate from reducing agents.

Storage stability:
Storage temperature: <= 35 °C
Keep container dry.

8. Exposure Controls and Personal Protection


Components with workplace control parameters
Aluminum oxide OSHA PEL 5 mg/m3 Respirable fraction ; PEL 15 mg/m3
Total dust ;
ACGIH TWA value 1 mg/m3 Respirable fraction ;

Advice on system design:


Provide local exhaust ventilation to control dust. Provide local exhaust ventilation to maintain recommended
P.E.L.

Personal protective equipment


Respiratory protection:
Wear a NIOSH-certified (or equivalent) particulate respirator. Observe OSHA regulations for respirator use (29
CFR 1910.134). Wear appropriate certified respirator when exposure limits may be exceeded.

Hand protection:
Wear chemical resistant protective gloves., Consult with glove manufacturer for testing data.

Eye protection:
Safety glasses with side-shields.
www.DeltaAdsorbents.com 630-980-5205

Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots,
chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).

General safety and hygiene measures:


No eating, drinking, smoking or tobacco use at the place of work.

9. Physical and Chemical Properties


Form: The form is derived from the trade name.
Odour: odourless
Colour: off-white
pH value: 9.4 - 10.1
Melting point: 2,050 °C
Vapour pressure: not applicable
Bulk density: 38.0 - 52 lb/ft3 ( 68 °F)
Partitioning coefficient The value has not been determined
n-octanol/water (log Pow): because the substance is inorganic.
Viscosity, dynamic: not applicable
Solubility in water: insoluble

10. Stability and Reactivity

Conditions to avoid:
Avoid deposition of dust. Avoid dust formation.

Substances to avoid:
water, reducing agents

Hazardous reactions:
The product is chemically stable.
No hazardous reactions known.

Decomposition products:
Hazardous decomposition products: No hazardous decomposition products known.

Thermal decomposition:
No decomposition if used correctly.

Corrosion to metals:
No corrosive effect on metal.

Oxidizing properties:
not fire-propagating

11. Toxicological information

Acute toxicity

Oral:

Information on: Aluminum oxide


Type of value: LD50
Species: rat
Value: > 5,000 mg/kg (OECD Guideline 401)
----------------------------------

Inhalation:
www.DeltaAdsorbents.com 630-980-5205

Information on: Aluminum oxide


Type of value: LC50
Species: rat
Value: > 2.3 mg/l (OECD Guideline 403)
Exposure time: 4 h
Tested as dust aerosol.
----------------------------------

Repeated dose toxicity

Information on: Aluminum oxide


Assessment of repeated dose toxicity:
The substance may cause damage to the lung after repeated inhalation of high doses.
----------------------------------

Other Information:

The product has not been tested. The statements on toxicology have been derived from the properties of the
individual components. The product has been assessed on the basis of the components’ available data. To
some extent data gaps exist for individual components. According to our present knowledge and experience
dangers which are not covered by the current labeling are not to be expected.

12. Ecological Information


Fish

Information on: Aluminum oxide


Acute:
Fish test acute semistatic
Pimephales promelas/LC50 (96 h): > 218.64 mg/l
The product has not been tested. The statement has been derived from products of a similar structure or
composition. Tested above maximum solubility.
----------------------------------

Information on: Aluminum oxide


Chronic:
semistatic Pimephales promelas 7 d 0.0938 mg/l
----------------------------------

Aquatic invertebrates

Information on: Aluminum oxide


Acute:
OECD Guideline 202, part 1 static
Daphnia magna/No observed effect concentration (48 h): > 100 mg/l
Tested above maximum solubility. The details of the toxic effect relate to the nominal concentration.
----------------------------------

Information on: Aluminum oxide


Chronic:
OECD Guideline 211 semistatic Daphnia magna (NOEC) 21 d 0.076 mg/l
The statement of the toxic effect relates to the analytically determined concentration. The product has not been
tested. The statement has been derived from products of a similar structure or composition.
----------------------------------

Aquatic plants

Information on: Aluminum oxide


Toxicity to aquatic plants:
OECD Guideline 201 static
green algae/No observed effect concentration (72 h): > 100 mg/l
Tested above maximum solubility. The details of the toxic effect relate to the nominal concentration.
----------------------------------
www.DeltaAdsorbents.com 630-980-5205

Other adverse effects:

The product has not been tested. The statements on ecotoxicology have been derived from the properties of the
individual components. The product has been assessed on the basis of the components’ available data. To
some extent data gaps exist for individual components. According to our present knowledge and experience
dangers which are not covered by the current labeling are not to be expected.

13. Disposal considerations


Waste disposal of substance:
Dispose of in accordance with local authority regulations. Check for possible recycling. Disposal requirements
are dependent on the hazard classification and will vary by location and the type of disposal selected. All waste
materials should be reviewed to determine the applicable hazards (testing may be necessary).

14. Transport Information

Land transport
USDOT
Not classified as a dangerous good under transport regulations

Sea transport
IMDG
Not classified as a dangerous good under transport regulations

Air transport
IATA/ICAO
Not classified as a dangerous good under transport regulations

15. Regulatory Information

Federal Regulations

Registration status:
Chemical TSCA, US released / listed

OSHA hazard category: Chronic target organ effects reported; ACGIH TLV established

EPCRA 311/312 (Hazard categories): Acute; Chronic

State regulations

State RTK CAS Number Chemical name


MA, NJ, PA 1344-28-1 Aluminum oxide

16. Other Information


www.DeltaAdsorbents.com 630-980-5205

NFPA Hazard codes:


Health : 1 Fire: 0 Reactivity: 0 Special:

HMIS III rating


Health: 1¤ Flammability: 0 Physical hazard: 0

NFPA and HMIS use a numbering scale ranging from 0 to 4 to indicate the degree of hazard. A value of zero means that the
substance possesses essentially no hazard; a rating of four indicates extreme danger. Although similar, the two rating
systems are intended for different purposes, and use different criteria. The NFPA system was developed to provide an
on-the-spot alert to the hazards of a material, and their severity, to emergency responders. The HMIS system was designed
to communicate workplace hazard information to employees who handle hazardous chemicals.

We support worldwide Responsible Care® initiatives. We value the health and safety of our employees,
customers, suppliers and neighbors, and the protection of the environment. Our commitment to Responsible
Care is integral to conducting our business and operating our facilities in a safe and environmentally responsible
fashion, supporting our customers and suppliers in ensuring the safe and environmentally sound handling of our
products, and minimizing the impact of our operations on society and the environment during production,
storage, transport, use and disposal of our products.

MSDS Prepared by:


BASF NA Product Regulations
[email protected]
MSDS Prepared on: 2011/06/23

IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED HEREIN
ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE , IT IS PROVIDED FOR YOUR
GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECT PROCESSING OR APPLICATION/USE, WE
RECOMMEND THAT YOU MAKE TESTS TO DETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR
PARTICULAR PURPOSE PRIOR TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION
SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE
DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR
TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLY UNDERSTAND AND AGREE THAT
THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATION FURNISHED BY BASF HEREUNDER ARE
GIVEN GRATIS AND BASF ASSUMES NO OBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS,
DATA AND INFORMATION GIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED
AT YOUR RISK.
END OF DATA SHEET

You might also like