Company name:
Created by:
Phone:
Date: 17/12/2024
Qty. Description
1 SP 18-29
Note! Product picture may differ from actual product
Product No.: 92952168
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 15 kW MS6000 motor with sand shield, mechanical shaft seal, water-lubricated journal
bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good
mechanical stability and high efficiency.
The motor is for direct-on-line starting (DOL).
Further product details
The pump is suitable for applications similar to the following:
- raw-water supply
- irrigation
- groundwater lowering
- pressure boosting
- fountain applications.
Pump
All pump surfaces that are in contact with pumped liquids are made in stainless steel which makes them corrosion-
and wear-resistant. The corrosion diagram below shows the capabilities of the pump and motor in relation to the
temperature in Celsius (y-axis) and the concentration of chloride in ppm (x-axis).
The suction interconnector is fitted with a strainer to prevent large particles from entering the pump. The suction
interconnector is designed to comply with NEMA standards for motor mounting/dimensions.
Motor
The stator is hermetically encapsulated in stainless steel and the windings are embedded in polymer compound. This
results in high mechanical stability, optimum cooling and reduces the risk of short circuits in the windings.
The shaft seal faces are ceramic/carbon. The material combination provides good dry-running resistance. Together
with the shaft seal housing, the sand shield forms a labyrinth seal, which during normal operating conditions prevents
penetration of sand particles into the shaft seal.
The motor can be fitted with a Pt100 or Pt1000 sensor that together with a control unit ensures that the maximum
operating temperature conditions are not exceeded.
Printed from Grundfos Product Centre [2024.50.003] 1
Company name:
Created by:
Phone:
Date: 17/12/2024
Qty. Description
1 Liquid:
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Technical:
Pump speed on which pump data are based: 2900 rpm
Actual calculated flow: 5.138 l/s
Rated flow: 5 l/s
Resulting head of the pump: 212.3 m
Rated head: 222 m
Shaft seal for motor: CER/CARNBR
Approvals: CE,EAC,UKCA,SEPRO,MOROCCO
Approvals for drinking water: ACS,DM174
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient pressure: 60 bar
Maximum operating pressure: 60 bar
Maximum outlet pressure: 32 bar
Type of connection: Rp
Size of connection: 2 1/2 inch
Motor diameter: 6 inch
Minimum borehole diameter: 145 mm
Electrical data:
Motor type: MS6000
Motor flange design: Grundfos
Rated power - P2: 15 kW
Power (P2) required by pump: 15 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 34.5-33.5-33.5 A
RequestedVoltage: 400 V
RatedCurrentAtThisVoltage: 33.9 A
Starting current: 490-540-570 %
Cos phi - power factor: 0.85-0.82-0.79
Rated speed: 2860-2870-2880 rpm
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in temp. transmitter: no
Length of cable: 5m
Power cable type: FLAT
Motor No: 78194516
Windings: Enamelled
Printed from Grundfos Product Centre [2024.50.003] 2
Company name:
Created by:
Phone:
Date: 17/12/2024
Qty. Description
1 Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 99.5 kg
Gross weight: 137 kg
Shipping volume: 0.338 m³
Environmental approvals: WEEE
Printed from Grundfos Product Centre [2024.50.003] 3
Company name:
Created by:
Phone:
Date: 17/12/2024
92952168 SP 18-29 50 Hz
H SP 18-29, 3*400 V, 50Hz eta
[m] [%]
350
300
250 100
200 80
150 60
100 40
50 20
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Q [l/s]
Q = 5.138 l/s H = 212.3 m
Es = 0.9137 kWh/m³ Pumped liquid = Water
Density = 998.2 kg/m³ Eta pump = 76.4 %
Eta pump+motor = 63.2 %
P NPSH
[kW] [m]
20 20
P1
15 15
P2
10 10
5 5
0 0
P1 = 16.9 kW
P2 = 13.98 kW
NPSH = 4.51 m
Printed from Grundfos Product Centre [2024.50.003] 4
Company name:
Created by:
Phone:
Date: 17/12/2024
H SP 18-29, 3*400 V, 50Hz eta
Description Value [m] [%]
General information: 350
Product name: SP 18-29
Product No: 92952168 300
EAN number: 5715122071719
Technical: 250 100
Pump speed on which pump data are 2900 rpm
based: 200 80
Actual calculated flow: 5.138 l/s
150 60
Rated flow: 5 l/s
Resulting head of the pump: 212.3 m
100 40
Rated head: 222 m
Stages: 29
50 20
Number of reduced-diameter NONE
impellers:
0 0
Shaft seal for motor: CER/CARNBR 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Q [l/s]
Approvals: CE,EAC,UKCA,SEPRO,MOR Q = 5.138 l/s H = 212.3 m
OCCO Es = 0.9137 kWh/m³ Pumped liquid = Water
Density = 998.2 kg/m³ Eta pump = 76.4 %
Approvals for drinking water: ACS,DM174 Eta pump+motor = 63.2 %
Curve tolerance: ISO9906:2012 3B P NPSH
[kW] [m]
Model: A 20 20
Motor version: T40 P1
Return valve: YES 15 15
P2
Materials:
10 10
Pump: Stainless steel
Pump: EN 1.4301 5 5
Pump: AISI 304
Impeller: Stainless steel 0 0
P1 = 16.9 kW
Impeller: EN 1.4301 P2 = 13.98 kW
Impeller: AISI 304 139.5
NPSH = 4.51 m
702
Motor: Stainless steel
2737.
5
2035.
5
GN
142
RP2 1/2
RP2 1/2
Motor: DIN W.-Nr. 1.4301 142 GN
Motor: AISI 304
Installation:
Maximum ambient pressure: 60 bar
Maximum operating pressure: 60 bar
2035.5
Maximum outlet pressure: 32 bar
Type of connection: Rp
2737.5
Size of connection: 2 1/2 inch
Motor diameter: 6 inch
Minimum borehole diameter: 145 mm
Liquid:
702
Pumped liquid: Water
Liquid temperature range: -15 .. 40 °C
Electrical data: 139.5
Motor type: MS6000
Motor flange design: Grundfos
Rated power - P2: 15 kW Y DOL
L1 L2 L3 PE L1 L2 L3 PE
Power (P2) required by pump: 15 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 34.5-33.5-33.5 A
Requested voltage: 400 V W2 U2 V2 U1 V1 W1
Rated current at this voltage: 33.9 A U1 V1 W1 PE PE
Starting current: 490-540-570 % M M
3 3
Cos phi - power factor: 0.85-0.82-0.79
Rated speed: 2860-2870-2880 rpm U1, W2 Brown
Start. method: direct-on-line V1, U2 Black
W1, V2 Grey
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Printed from Grundfos Product Centre [2024.50.003] 5
Company name:
Created by:
Phone:
Date: 17/12/2024
Description Value
Built-in motor protection: NONE
Thermal protec: external
Built-in temp. transmitter: no
Length of cable: 5m
Power cable type: FLAT
Motor No: 78194516
Cable number: 96164209
Windings: Enamelled
Others:
Minimum efficiency index, MEI ≥: 0.70
Net weight: 99.5 kg
Gross weight: 137 kg
Shipping volume: 0.338 m³
Environmental approvals: WEEE
Printed from Grundfos Product Centre [2024.50.003] 6
Company name:
Created by:
Phone:
Date: 17/12/2024
92952168 SP 18-29 50 Hz
cos phi SP18-29 + MS6000 15 kW 3*400 V, 50 Hz I
eta [A]
cos phi
0.8 eta 40
0.6 30
0.4 20
0.2 10
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 P2 [kW]
n P1
[rpm] [kW]
3000
2800 n 40
2600 P1 30
2400 20
2200 10
2000 0
Printed from Grundfos Product Centre [2024.50.003] 7
Company name:
Created by:
Phone:
Date: 17/12/2024
92952168 SP 18-29 50 Hz
RP2 1/2
142 GN
2035.5
2737.5
702
139.5
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2024.50.003] 8
Company name:
Created by:
Phone:
Date: 17/12/2024
92952168 SP 18-29 50 Hz
Y DOL
L1 L2 L3 PE L1 L2 L3 PE
W2 U2 V2 U1 V1 W1
U1 V1 W1 PE PE
M M
3 3
U1, W2 Brown
V1, U2 Black
W1, V2 Grey
Note! All units are in [mm] unless others are stated.
Printed from Grundfos Product Centre [2024.50.003] 9
Company name:
Created by:
Phone:
Date: 17/12/2024
Installation illustration
Flow (Q): 5.1 l/s
Head: 212.3 m
Printed from Grundfos Product Centre [2024.50.003] 10
