Sustainable Energy Science and Engineering Center
Hydrogen Production
Source:
Sustainable Energy Science and Engineering Center
Feedstocks Usage in Hydrogen Production
Source: NAS Study, 2004
Sustainable Energy Science and Engineering Center
Sustainable Paths to Hydrogen
Source:
Sustainable Energy Science and Engineering Center
Hydrogen Production Methods
Most methods of producing hydrogen involve splitting water (H2O) into its component parts of
hydrogen (H2) and oxygen (O). The most common method involves steam reforming of methane
(from natural gas), although there are several other methods.
• Steam reforming converts methane (and other hydrocarbons in natural gas) into
hydrogen and carbon monoxide by reaction with steam over a nickel catalyst
• Electrolysis uses electrical current to split water into hydrogen at the cathode (+) and
oxygen at the anode (-)
• Steam electrolysis (a variation on conventional electrolysis) uses heat, instead of
electricity, to provide some of the energy needed to split water, making the process
more energy efficient
• Thermochemical water splitting uses chemicals and heat in multiple steps to split water
into its component parts
• Photoelectrochemical systems use semi-conducting materials (like photovoltaics) to
split water using only sunlight
• Photobiological systems use microorganisms to split water using sunlight
• Biological systems use microbes to break down a variety of biomass feed stocks into
hydrogen
• Thermal water splitting uses a very high temperature (approximately 1000°C) to split
water
• Gasification uses heat to break down biomass or coal into a gas from which pure
hydrogen can be generated
Sustainable Energy Science and Engineering Center
Hydrogen Production
Sustainable Energy Science and Engineering Center
Chemical Hydrogen Production
Sustainable Energy Science and Engineering Center
Electrolysis
Sustainable Energy Science and Engineering Center
Electrolysis
Sustainable Energy Science and Engineering Center
Electrolysis of Water
By providing energy from a battery, water (H2O)
can be dissociated into the diatomic molecules of
hydrogen (H2) and oxygen (O2). This process is a
good example of the the application of the four
thermodynamic potentials (internal energy, U,
Helmoltz free energy, F = U-TS; Enthalpy, H =
U+pv and Gibbs free energy, G =U+pv-TS.
The electrolysis of one mole of water produces a mole of hydrogen gas and a
half a mole of oxygen gas in their normal diatomic forms. A detailed analysis
of this process makes use of the thermodynamic potentials and the first law
of thermodynamics. This process is presumed to be at 298K and atmospheric
pressure.
Sustainable Energy Science and Engineering Center
Electrolysis of Water
System work:
Quanitity H2O H2 0.5O2 Change
Enthalpy -285.83kJ 0 0 ∆H = -285.83kJ
Entropy 69.91 J/K 130.68J/K 0.5x205.14J/K T∆S = 48.7 kJ
W = P∆V = (101.3 kPa)(1.5 moles)(22.4x10-3m3/mol)(298K/273K) = 3715 J
∆U = ∆H-P ∆V = 285.83kJ-3.72 kJ = 282.1 kJ
∆G = ∆H-T ∆S = 285.83 kJ-48.7 kJ = 237.1 kJ
Sustainable Energy Science and Engineering Center
Efficiency
Systems that claim
85 %
Improved electrolysis efficiency
can bring the PV-hydrogen
efficiency to about 10%
Sustainable Energy Science and Engineering Center
Hydrogen Production
There is enough water to sustain
hydrogen!
Sustainable Energy Science and Engineering Center
Electrolysis of Water
LOW CURRENT ELECTROLYSIS OF WATER by Ph. M. Kanarev
The most modern Electrolyzers consume 4.0 kWh per cubic meter of H2 gas.
Electrolysis process takes place by voltage of 1.6-2.0 V and current strength of dozens
and hundreds of amperes. When one cubic meter of hydrogen is burnt, 3.55 kWh of
energy is released [1].
A money-saving process of decomposition of water molecules into hydrogen and
oxygen exists in the nature. This process takes place during photosynthesis. Hydrogen
atoms are separated from water molecules and are used as connecting links while forming
organic molecules, and oxygen is released into the air.
A question emerges: is it possible to model an electrolytical process of water
decomposition into hydrogen and oxygen, which takes place during photosynthesis? A
search of a reply to this question has resulted in a simple structure of a cell (Fig. 1), in
which the process takes place by voltage of 1.5-2.0 V between the anode and the cathode
and amperage of 0.02 amperes [1], [2].
http://guns.connect.fi/innoplaza/energy/story/Kanarev/electrolysis/
Sustainable Energy Science and Engineering Center
Hydrogen Production
The electrodes of the cell are made of steel. It helps to avoid the phenomena, which are
appropriate to a galvanic cell. Nevertheless, at the cell electrodes a potential difference of nearly
0.1 V takes place in complete default of electrolytic solution in it. When the solution is charged,
the potential difference is increased. The positive sign of the charge appears on the upper
electrode always, and the negative sign appears on the lower one. If a direct current source
generates pulses, gas output is increased.
As a laboratory model of the low current electrolyzer cell generates small quantity of
gases, a solution mass change definition method during the experiment and further calculation of
released hydrogen and oxygen is the most reliable method of definition of their quantity.
It is known that a gram atom is equal to atomic mass of substance; a gram molecule is equal to
molecular mass of substance. For example, the gram molecule of hydrogen in the water
molecule is equal to two grams; the gram-atom of the oxygen atom is 16 grams. The gram
molecule of water is equal to 18 grams. Hydrogen mass in a water molecule is
2x100/18=11.11%; oxygen mass is 16x100/18=88.89%; this ratio of hydrogen and oxygen is in
one liter of water. It means that 111.11 grams of hydrogen and 888.89 grams of oxygen are in
1000 grams of water.
One liter of hydrogen weighs 0.09 g; one liter of oxygen weighs 1.47 g. It means that it is
possible to produce 111.11/0.09=1234.44 liters of hydrogen and 888.89/1.47=604.69 liters of
oxygen from one liter of water. It appears from this that one gram of water contains 1.23 liters of
hydrogen. Energy consumption for production of 1000 liters of hydrogen is 4 kWh and for one
liter 4 Wh. As it is possible to produce 1.234 liters of hydrogen from one gram of water,
1.234x4=4.94 Wh is spent for hydrogen production from one gram of water now.
Sustainable Energy Science and Engineering Center
Hydrogen Production
A small value of current 0.02 A and voltage 0.062 V allows us to suppose that in the low current
electrolyzer the water electrolysis process is similar to the process, which takes place during
photosynthesis. At photosynthesis, hydrogen separated from the water molecule is used as a
connecting link while organic molecule formation, and oxygen is released in the air. At low
current electrolysis, both hydrogen and oxygen are released in the air.
Note: gas release is clearly seen during several hours after the cell is disconnected from the line.
REFERENCES
1. Kanarev Ph.M. The Foundation of Physchemistry of Microworld. The third edition. –
Krasnodar: KSAU, 2003. http://Kanarev.innoplaza.net (In Russian, Part 1, Part 2).
2. Kanarev Ph.M. The Foundation of Physchemistry of Microworld. The second edition. (In
English). http://book.physchemistry.innoplaza.net
Sustainable Energy Science and Engineering Center
Hydrogen Production
Producing hydrogen from water, without electrolysis
Electrochemical potential difference drives the reaction
Researchers at DOE’s National Energy Technology Laboratory and
Argonne National Laboratory have patented a "Method of Generating
Hydrogen by Catalytic Decomposition of Water." The invention
potentially leapfrogs current capital and energy intensive processes that
produce hydrogen from fossil fuels or through the electrolysis of water. US patent #
According to co-inventor Arun Bose, "Hydrogen can be produced by 6,468,499
electrolysis, but the high voltage requirements are a commercial barrier.
The invention provides a new route for producing hydrogen from water
by using mixed proton-electron conducting membranes." Water is
decomposed on the feed surface. The hydrogen is ionized and protons
and electrons travel concurrently through the membrane. On the
permeate side, they combine into hydrogen molecules.
Sustainable Energy Science and Engineering Center
Photoelectrolysis
Hydrogen Production by Photo-electrolysis of Water
The photo-electrolysis of water into hydrogen and oxygen using solar energy
is potentially a clean and renewable source of hydrogen fuel for the hydrogen
economy. The energy conversion efficiency of water photo-electrolysis is
determined mainly by the properties of the materials used as electrodes in
the photo-electrochemical cell. Obstacles to direct photo-electrolysis of water
are the lack of efficient light absorption, corrosion of the semiconductor
photo-catalyst and energetics. The aim of research work is to engineer
materials with appropriate optical, electronic and chemical properties for use
as photo-catalysts in efficient and cost effective photo-electrochemical cells.
Sustainable Energy Science and Engineering Center
Photoelectrolysis
Sustainable Energy Science and Engineering Center
Direct Conversion
Sustainable Energy Science and Engineering Center
Photoelectrolysis
Sustainable Energy Science and Engineering Center
Photoelectrolysis
Sustainable Energy Science and Engineering Center
Photoelectrolysis
Sustainable Energy Science and Engineering Center
Photoelectrolysis
Sustainable Energy Science and Engineering Center
Photoelectrolysis
A strong motivation for improved
electrolysis process
Sustainable Energy Science and Engineering Center
Thermal Decomposition of Water
By heating water to over 2,000ºC, it is broken down into hydrogen and
oxygen. This is considered to be an interesting and inexpensive method
of producing hydrogen directly from solar energy. Research is also being
done on the use of catalysts to reduce the temperature for dissociation.
One central problem is the separation of gases at high temperatures to
avoid recombining. The efficiency factor is uncertain.
Sustainable Energy Science and Engineering Center
Thermochemical Production from
Nuclear Energy
Source:
Sustainable Energy Science and Engineering Center
Thermochemical Production
Sustainable Energy Science and Engineering Center
Thermochemical Production
Sustainable Energy Science and Engineering Center
Thermochemical Production
Sustainable Energy Science and Engineering Center
Thermochemical Production
Possible
production
of heat by
solar
thermal
plant
Sustainable Energy Science and Engineering Center
Thermochemical Production
Sustainable Energy Science and Engineering Center
Thermochemical Production
Sustainable Energy Science and Engineering Center
Thermochemical Production
Sustainable Energy Science and Engineering Center
Efficiency
Sustainable Energy Science and Engineering Center
Efficiency
Sustainable Energy Science and Engineering Center
Fuel Properties
Sustainable Energy Science and Engineering Center
Fuel Properties
Sustainable Energy Science and Engineering Center
Fuel Properties
