Halloween garland
Crochet pattern
Halloween garland
Author: Volha Kuzhko
@helga_ _toys
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
Hello!
My name is Volha. Thank you for purchasing my project!
It does not contain crochet tutorials and is designed for professionals or amateurs
with crocheting experience.
Crochet level:
All pieces will be crocheted in a spiral unless otherwise specified.
Use a marker thread to mark the first stitch of each new round.
The ghost height is about 2,8 inches (7 cm) tall if stated materials. Garland in
length is about 40 inches (100 cm).
I wish you happy crocheting!
Important!
This pattern is my author's product and is intended for personal use only!
It is prohibited to distribute, copy, post on the Internet, exchange, share, sell, or
translate into other languages.
You can sell your finished toy that you have made. When selling or
demonstrating a finished toy crocheted according to this pattern, be sure to give a
credit to the designer - Volha Kuzhko or a link to @helga_ _toys
2
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
TOOLS AND MATERIALS
1. Yarn (one ball or less of each color):
YARN ART jeans color 62 (white);
YARN ART jeans color 53 (black);
YARN ART jeans color 50 (purple);
YARN ART jeans color 84 (mustard);
YARN ART jeans color 85 (orange);
YARN ART jeans color 70 (dark brown);
YARN ART jeans color 82 (swamp);
YARN ART jeans color 60 (bright green).
The YARN ART jeans palette can be found here:
[Link]
2. Stuffing material (polyester fiberfill).
3. Scissors.
4. Crochet hook 2,0 mm.
5. Safety eyes mount 0.2 inches (5 mm) for ghost and glue-based 0.3 inches
(7 mm) – for spider.
Note. If you will not use safety eyes in this project, therefore
the toy is not recommended for children under 3 years old!
6. Two felt circles with a diameter of 0,5 inches (12 mm).
7. «Moment» glue or any other fast-acting glue.
8. Needle for toy assembly.
9. Two small buttons of different diameters 0,2 – 0,4 inches (5-10 mm) for the
skull.
10. Good mood ;)
3
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
ABBREVIATIONS (in the US terminology ):
ch Chain
MR Magic Ring, “amigurumi ring”
sl st slip stitch
sc single crochet or
sc-BLO single crochet in back loop only (worked in
BLO)
sc-FLO single crochet in front loop only (worked in
FLO)
hdc half double crochet
dc double crochet
tr treble crochet
2tr in 1st 2 treble crochet in 1 stitch
puff stitch of puff stitch of 3 double crochets
3dc
inc increase (or 2sc stitches in the same stitch) or
dec decrease (or 2sc stitches together) or
(….)×n repeat what is inside (….) symbols is number
of times n specified in the pattern
…N The total amount of stitches in the round
Please, contact me in any convenient way if you have any questions, suggestions
about the pattern or you have found an error in this tutorial.
My contacts: E-mail: helgatoyspatterns@[Link]
Instagram: [Link] _toys/
I declare my adherence to a series of guidelines and symbols to bring uniformity to yarn,
needle and hook labeling, and patterns. Source: Craft Yarn Council’s
[Link]
4
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
GHOST
Detail 1:
Using white yarn color:
1. 6sc into MR ................................................. 6
2. 6inc.............................................................. 12
3. (1sc, inc)×6 .............................................. 18
4. (2sc, inc)×6 .............................................. 24
5. (3sc, inc)×6 .............................................. 30
6. (4sc, inc)×6 .............................................. 36
7. (5sc, inc)×6 .............................................. 42
Cut the yarn, fasten it off, and hide the end.
Detail 2:
Using white yarn color:
1. 6sc into MR .............................................. 6
2. 6inc............................................................12
3. (1sc, inc)×6 ............................................18
4. (2sc, inc)×6 ............................................24
5. (3sc, inc)×6 ............................................30
6. 2sc, inc, (4sc, inc)×5, 2sc ..................36
7-14 (8 rounds). 36sc.............................36
15. (5sc, inc)×6 .........................................42
16-20 (5 rounds). 42sc ..........................42
Insert the eyes between 11th and 12th rounds at a distance
of 5 stitches.
21. 42sc ........................................................42
22. 42sc, crocheting together the loops of this detail and
detail 1 (see photo). In the process, loosely stuff the ghost.
24. (1sl st, 1hdc, 1dc, 2tr in 1st,
1dc, 1hdc)×7 ......................................49
Cut the yarn, fasten it off, and hide the end.
5
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
Arms (2 pcs.):
Using white yarn color:
1. 6sc into MR ................................................. 6
2. 6inc.............................................................. 12
3. 12sc ............................................................. 12
4. (3sc, inc)×3 .............................................. 15
Cut the yarn, leaving a long tail.
Sew the arms to the ghost between 12 and 19 rounds. Do
not stuff the arms. Embroider the mouth between 13 and
14 rounds.
SPIDER
Using black yarn color:
1. 6sc into MR ........................................................ 6
2. 6inc..................................................................... 12
3. (1sc, inc)×6 ..................................................... 18
4. (2sc, inc)×6 ..................................................... 24
5. (3sc, inc)×6 ..................................................... 30
6. 2sc, inc, (4sc, inc)×5, 2sc ........................... 36
7. (5sc, inc)×6 ..................................................... 42
8-14 (7 rounds). 42sc...................................... 42
15. 7sc, (make a chain of 10ch, from the second loop from
the hook crochet 7sc, dec, 2sc-FLO)×4, 12sc, (make a chain
of 12ch, from the second loop from the hook crochet 1sc,
dec, 2sc, 2dec, 2sc, 2sc-FLO)×4, 7sc ..................
16. ATTENTION! All the loops that were crocheted in the
previous round in FLO, in this round crochet in BLO of the
previous round: (1sc, dec)×2, 1sc, (dec, 1sc-BLO)×2, dec),
1sc, (dec, 1sc)×3, dec, (dec, 1sc-BLO)×2, dec), 2sc, dec, 1sc,
dec ............................................................................. 28
17. (2sc, dec)×7 ................................................. 21
Stuff the part loosely.
18. (1sc, dec)×7 ................................................. 14
6
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
19. 7dec .................................................................... 7
Cut the yarn, leaving a long tail.
Use a needle to pull the opening closed and hide the end
of the yarn.
Between 9 and 13 rounds, glue white felt circles and glue
eyes onto them (see photo)
WITCH HAT
Using purple yarn color.
1. 6sc into MR ........................................................ 6
2. 6sc.......................................................................... 6
3. (1sc, inc)×3 ........................................................ 9
4-5. 9sc ..................................................................... 9
6. (2sc, inc)×3 .................................................... 12
7. 12sc .................................................................... 12
8. (3sc, inc)×3 ..................................................... 15
9. 15sc .................................................................... 15
10. (4sc, inc)×3 .................................................. 18
11. 9sl st, 9sc ....................................................... 18
12. (5sc, inc)×3 .................................................. 21
13. 10sl st, 11sc.................................................. 21
14. (6sc, inc)×3 .................................................. 24
15. 14sc, 8sl st, 2sc ........................................... 24
16. (7sc, inc)×3 .................................................. 27
17-18. 15sc, 12sl st........................................... 27
19. (8sc, inc)×3 .................................................. 30
20. 30sc ................................................................. 30
21. (1sc-FLO, inc)×15 ...................................... 45
22. 10sc, 3inc, 19sc, 3inc, 10sc .................... 51
23. 11sc, 4inc, 8sc, 3inc, 10sc,
4inc, 8sc, 3inc ............................................. 65
24. 1inc, 27sc, 3inc, 30sc, 4inc..................... 73
25. 73sc ................................................................. 73
Cut the yarn, fasten it off, and hide the end.
7
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
SCULL
Using white yarn color:
1. 6sc into MR ................................................... 6
2. 6inc................................................................ 12
3. (1sc, inc)×6 ................................................ 18
4. (2sc, inc)×6 ................................................ 24
5. (3sc, inc)×6 ................................................ 30
6. 2sc, inc, (4sc, inc)×5, 2sc ...................... 36
7. (5sc, inc)×6 ................................................ 42
8. 3sc, inc, (6sc, inc)×5, 3sc ...................... 48
9-16 (8 rounds). 48sc................................. 48
17. 3sc, dec, (6sc, dec)×5, 3sc ................. 42
18. (5sc, dec)×6 ............................................ 36
19. 2sc, dec, (4sc, dec)×5, 2sc ................. 30
20. (3sc, dec)×6 ............................................ 24
Begin stuffing detail.
21. 1sc, dec, (2sc, dec)×5, 1sc ................. 18
22. (1sc, dec)×6 ............................................ 12
23. 6dec ............................................................... 6
Pull the opening closed and hide the end of the yarn.
Between the 13th and 14th rounds, randomly embroider a very wide mouth with
black yarn, and sew buttons of different sizes just above the mouth.
PUMPKIN (2 pcs.)
According to this pattern crochet two pumpkins of different colors - orange and
mustard.
1. 6sc into MR ............................................ 6
2. 6inc......................................................... 12
3. (1sc, inc)×6 ......................................... 18
4. (2sc, inc)×6 ......................................... 24
5. (3sc, inc)×6 ......................................... 30
6. (4sc, inc)×6 ......................................... 36
7. (5sc, inc)×6 ......................................... 42
8. (6sc, inc)×6 ......................................... 48
9. (7sc, inc)×6 ......................................... 54
10-16 (7 rounds). 54sc ....................... 54
17. (7sc, dec)×6 ..................................... 48
8
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
18. (6sc, dec)×6 ..................................... 42
19. (5sc, dec)×6 ..................................... 36
20. (4sc, dec)×6 ..................................... 30
21. (3sc, dec)×6 ..................................... 24
Stuffing detail. Change the yarn to swamp.
22. (2sc, dec)×6 ..................................... 18
23. (1sc, dec)×6 ..................................... 12
24. 6dec ........................................................ 6
25-26. 6sc .................................................... 6
27. 3dec ........................................................ 3
28. 3sc ........................................................... 3
29. dec, 1sc, 2ch ........................................ 3
Cut the yarn, leaving a 0.4-inch (1 cm) end.
To sculpting the pumpkin, will need a long swamp yarn.
Let's divide the pumpkin into 8 parts. Stretch the needle
with the yarn in the center at the bottom and stick the
needle out at the top at the junction of the swamp and
main color yarn. Return the needle back down and
repeat the action 7-8 times around the pumpkin. Each
time, pull the yarn tightly so that it forms a dent in the
pumpkin.
Cut the yarn, securely fasten it off, and hide the end.
CAULDRON WITH POTION
Using black yarn color:
1. 6sc into MR ............................................ 6
2. 6inc......................................................... 12
3. (1sc, inc)×6 ......................................... 18
4. (2sc, inc)×6 ......................................... 24
5. (3sc, inc)×6 ......................................... 30
6. (4sc, inc)×6 ......................................... 36
7. (8sc, puff stitch of 3dc)×4 ............ 36
8. (5sc, inc)×6 ......................................... 42
9
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
9. (6sc, inc)×6 ......................................... 48
10. (7sc, inc)×6 ...................................... 54
11-18 (8 rounds). 54sc ....................... 54
19. (inc, 2sc-FLO)×18 .......................... 72
20. 72sl st ................................................. 72
Do not cut the yarn, leave it in out of crocheting.
Take a bright green yarn and attach it to the 19th
round of the cauldron, will crochet a potion.
1. working in BLO with 19th round:
(4sc-BLO, dec)×9 .............................. 45
2. (1sc, dec)×15 ..................................... 30
3. (3sc, dec)×6 ........................................ 24
Begin stuffing detail.
4. (2sc, dec)×6 ........................................ 18
5. (1sc, dec)×6 ........................................ 12
6. 6dec........................................................... 6
Pull the opening closed and hide the end of the yarn.
To crochet the cauldron's handle, return to the remaining black yarn and make a
chain of 25ch. Sew the end of the chain to the opposite edge of the cauldron.
Ladle handle.
Using dark brown yarn color:
1. 6sc into MR ............................................ 6
2-8 (7 rounds). 6sc .................................. 6
Cut the yarn, leaving a long tail.
Sew the ladle handle to the potion. If the bottom of the pot is too convex, you can
sculp it with one stitch to the top of the potion.
10
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
ASSEMBLY OF THE GARLAND
With black yarn make a chain of 40ch. Using 1sl st attach
the chain to the skull as shown in the photo.
Make a chain of 30ch. Using 1sl st attach the chain to the
top of the pumpkin.
Make a chain of 30ch. Using 1sl st attach the chain to the
top of the middle of the cauldron's handle.
Make a chain of 30ch. Using 1sl st attach the chain to the
top of the witch hat.
11
HTBY-HG048442-24 © helga_ _toys Crochet pattern Halloween garland 2024
Make a chain of 30ch. Using 1sl st attach the chain to the
top of the spider.
Make a chain of 30ch. Using 1sl st attach the chain to the
top of the ghost.
Make a chain of 30ch. Using 1sl st attach the chain to the top
of the second pumpkin.
Make a chain of 40ch.
Cut the yarn, and fasten it off.
Congratulations, our creepy Halloween garland is ready!
I hope you’ve enjoyed your work!
CARE RECOMMENDATIONS
If your toy is made from the materials specified in the section «Tools and materials», follow
these simple care guidelines.
Do not leave the toy in direct sunlight for a long time!
Periodically remove dust from it with light movements of a soft brush, if you want, carefully
use a vacuum cleaner at low power with a clean soft furniture nozzle.
If you need to get rid of more serious dirt, wash your toy in water that does not exceed 86°F
(or 30°C). Do not use bleaches or stain removers! Use a mild liquid detergent such as shampoo
for delicate fabrics or wool. But it is safest to use detergents for baby clothes. The toy will like it if
you bathe it with your hands, but the delicate mode of the washing machine without spinning is
also suitable. After washing, gently squeeze the toy with your hands, without deforming it.
Dry away from heating appliances, in a room with good air circulation, or outdoors (in the
shade) in a horizontal position. Do not hang the toy!
Since the toy contains natural materials, it is recommended to periodically get rid of dust
mites. To do this, place it in the freezer for 48 hours. At a temperature of 14°F (or ̶ 10°C), ticks
die.
My contacts:
E-mail: helgatoyspatterns@[Link]
Instagram: [Link]
12
