3D SERIES -
3D(4) SERIES - MD/MMD(4)
End suction pumps in cast iron with impeller in AISI 304, AISI 316 and cast iron (EN 733)
3D-MD/MMD SERIES is the EBARA range of close coupled pumps with cast iron body and AISI 304 or AISI 316 stainless steel
impeller. 3D-MD/MMD SERIES pumps represent a versatile range suitable for a lot of applications and offer significant advantages
in terms of reliability, efficiency and cost saving. Suitable for handling clean water for residential, commercial, agricultural and
industrial use, pressure booster sets, heating and air-conditioning systems. Also used for irrigation on farms, sports centres,
washing systems.
Technical data
Max. working
10 bar
pressure
-5°C ÷ +90°C
Max. -5°C ÷ +110°C for H-HS-HW-HSW
temperature versions
of the liquid -5°C ÷ +120°C for E versions
-10°C ÷ +90°C for MMD
MEI > 0,4
Poles 2 and 4
Insulation
F (rise temperature class B)
class
Protection
IP55
degree
Single phase 1~230V ±10%
Three phase 3~230/400V ±10%
High Sturdy Impeller Voltage (up to 4 kW included)
efficiency construction in stainless
steel Three phase 3~400/690V ±10%
(from 5,5kW and above)
Permanent split capacitor built in overload motor protector with automatic reset.
Materials The three phase version does not have an internal motor protector, therefore
overload protection must be provided by the user.
Pump
Cast iron
body
AISI 304 (EN 1.4301)
Impeller AISI 316 (EN 1.4401) for 3D 65
Cast iron for MMD
AISI 304 (EN 1.4301)
Shaft
AISI 420 (EN 1.4021) (MMD)
Standard = Ceramic/Carbon/NBR
MMD = SiC/SiC/NBR
Mechanical H = Graphite/Ceramic/FPM
HS = Silicium carbide/Silicium carbide/FPM
seal HW = Tungsten carbide/Tungsten carbide/FPM
HSW = Silicium carbide/Tungsten carbide/FPM
E = Graphite/Ceramic/EPDM
Cast iron for 32-200/3, 15, 18,5
Motor
and 22 kW models
support
Aluminium for the rest of the range
Back pull-out
Impeller, bracket and motor can be extracted without disconnecting
the pump body from the piping for any maintenance operations
3D SERIES -
3D(4) SERIES - MD/MMD(4)
End suction pumps in cast iron with impeller in AISI 304, AISI 316 and cast iron (EN 733)
3D-MD/MMD SERIES is the EBARA range of close coupled pumps with cast iron body and AISI 304 or AISI 316 stainless steel
impeller. 3D-MD/MMD SERIES pumps represent a versatile range suitable for a lot of applications and offer significant advantages
in terms of reliability, efficiency and cost saving. Suitable for handling clean water for residential, commercial, agricultural and
industrial use, pressure booster sets, heating and air-conditioning systems. Also used for irrigation on farms, sports centres,
washing systems.
Technical data
Max. working
10 bar
pressure
-5°C ÷ +90°C
Max. -5°C ÷ +110°C for H-HS-HW-HSW
temperature versions
of the liquid -5°C ÷ +120°C for E versions
-10°C ÷ +90°C for MMD
MEI > 0,4
Poles 2 and 4
Insulation
F (rise temperature class B)
class
Protection
IP55
degree
Single phase 1~230V ±10%
Three phase 3~230/400V ±10%
High Sturdy Impeller Voltage (up to 4 kW included)
efficiency construction in stainless
steel Three phase 3~400/690V ±10%
(from 5,5kW and above)
Permanent split capacitor built in overload motor protector with automatic reset.
Materials The three phase version does not have an internal motor protector, therefore
overload protection must be provided by the user.
Pump
Cast iron
body
AISI 304 (EN 1.4301)
Impeller AISI 316 (EN 1.4401) for 3D 65
Cast iron for MMD
AISI 304 (EN 1.4301)
Shaft
AISI 420 (EN 1.4021) (MMD)
Standard = Ceramic/Carbon/NBR
MMD = SiC/SiC/NBR
Mechanical H = Graphite/Ceramic/FPM
HS = Silicium carbide/Silicium carbide/FPM
seal HW = Tungsten carbide/Tungsten carbide/FPM
HSW = Silicium carbide/Tungsten carbide/FPM
E = Graphite/Ceramic/EPDM
Cast iron for 32-200/3, 15, 18,5
Motor
and 22 kW models
support
Aluminium for the rest of the range
Back pull-out
Impeller, bracket and motor can be extracted without disconnecting
the pump body from the piping for any maintenance operations
Technical Data Pump Name 3D/I 40-200/5.5
Customer Date 2024-08-07 Company
Contact Item no. Issued by
Phone Project Phone
E-mail Project ID E-mail
Requested data
1 Pump type CENTRIFUGAL PUMPS Fluid Water
2 Number of pumps / Reserve 1 / 0 Liquid temperature °C 20
3 Flow m³/h 24 Kin. viscosity mm²/s 1.005
4 Head m 40 Vapour pressure kPa 2.34
5 Geodetic head m 0 PH value
6 Inlet pressure (pin) kPa 0 Density kg/m³ 998.3
7 Available system NPSH Solids Weight % 0
8 Ambient temperature °C 20
Pump
9 Pump Name 3D/I 40-200/5.5 Frequency Hz 50
10 Design CENTRIFUGAL PUMPS Installation type STANDARD
11 Manufacturer EPE Impeller Max. mm 183
12 Speed 1/min 2900 Diameter Designed mm 183
13 No. of Stage 1 Min. mm 183
14 Connection Suction side EN 1092-2 Flow Operating m³/h 24.3
15 Connection Discharge side EN 1092-2 Max- m³/h 42
16 Max Working Pressure kPa 1000 Min- m³/h 12
17 Shut-off head kPa 445.56 Head Operating m 41.0
18 Total weight kg See the table of "Dimensions". - (Qmax.) m 33.0
19 Shaft power kW 4.44 - (Qmin.) m 44.6
20 Max. Shaft Power at max. impeller kW 5.52
21 Required pump NPSH m 1.7 Efficiency % 61.2
Materials
22 Impeller AISI 304
23 Casing Cast iron
24 Shaft AISI 304 (wet extension)
25
26
27
Motor
28 Manufacturer EPE Standard Insulation class F
29 Type TEFC_3D 40-200/5.5_400_Three Phase Phases 3~
30 Specific design IE3 / 50 Hz / Pole pairs 1 Frame size
31 Rated power kW 5.5 Weight kg
32 Number of poles 2 Electric voltage V 400
33 Speed 1/min 2900 Electric current A 10.6
34 Degree of protection IP 55
35
Remarks
Performance Curve Pump Name 3D/I 40-200/5.5
Customer Date 2024-08-07 Company
Contact Item no. Issued by
Phone Project Phone
E-mail Project ID E-mail
Requested data Pump
1 Flow m³/h 24 Operating flow m³/h 24.3 Frequency Hz 50
2 Head m 40 Operating head m 41.0 Number of poles 2
3 Geodetic head m 0 Impeller diameter designed mm 183 Speed 1/min 2900
Test standard: ISO 9906:2012 - Grade3B Water; 20°C; 998.3kg/m³; 1mm²/s
H/ m Head — Ø 183 ∆p / kPa
460
440
420
40.97 401.2
400
40
380
A1
360
Eff. 68.3% 340
320
30 300
Frequency
280
260
240
220
20 200
180
160
140
120
10 100
80
60
40
20
0 0
P₂ / kW Shaft power P2
5.2
4.8
4.439
4.4
4
3.6
3.2
η/% Hydraulic efficiency η tot / %
Total efficiency
61.25
60 60
55.37
55
50 50
45
40 40
NPSH / m NPSH-values
2.8
2.6
2.4
2.2
2
1.8
1.747
1.6
1.4
0 2 4 6 8 10 12 14 16 18 20 22 24.29
24 26 28 30 32 34 36 38 40 42 Q / m³/h
Dimensions Pump Name 3D/I 40-200/5.5
Customer Date 2024-08-07 Company
Contact Item no. Issued by
Phone Project Phone
E-mail Project ID E-mail
Dimensions in mm
1 A 296 H1 160
2 A1 148 H2 180
3 A2 148 H3 150
4 B 539 M 100
5 C 275 N1 212
6 Dia D1 185 N2 265
7 Dia D2 150 R 100
8 Dia DN1 65 S1 20
9 Dia DN2 40 S2 18
10 Dia K1 145 T 50
11 Dia K2 110 V1 M20X1,5
12 Dia P1 122 V2 M25X1,5
13 Dia P2 88 W 70
14 E 12 Weight P&M 60 kg
15 H 340
(1/3)
Construction Pump Name 3D/I 40-200/5.5
Customer Date 2024-08-07 Company
Contact Item no. Issued by
Phone Project Phone
E-mail Project ID E-mail
(2/3)
Construction Pump Name 3D/I 40-200/5.5
Customer Date 2024-08-07 Company
Contact Item no. Issued by
Phone Project Phone
E-mail Project ID E-mail
(3/3)
Construction Pump Name 3D/I 40-200/5.5
Customer Date 2024-08-07 Company
Contact Item no. Issued by
Phone Project Phone
E-mail Project ID E-mail
