Scribd
Upload
147 views2 pages

234 XL Crossover Procesadores

The Apogee 234 XL Crossover is a versatile audio processor that supports 3-way stereo or 4-way mono configurations, featuring a low-cut filter and multiple input/output options. It offers high performance with a bandwidth of 20Hz to 20kHz, a dynamic range exceeding 114 dB, and low total harmonic distortion. The device includes various function switches for operation mode selection and phase inversion, along with LED indicators for monitoring status.

Uploaded by

Josue Acosta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
147 views2 pages

234 XL Crossover Procesadores

The Apogee 234 XL Crossover is a versatile audio processor that supports 3-way stereo or 4-way mono configurations, featuring a low-cut filter and multiple input/output options. It offers high performance with a bandwidth of 20Hz to 20kHz, a dynamic range exceeding 114 dB, and low total harmonic distortion. The device includes various function switches for operation mode selection and phase inversion, along with LED indicators for monitoring status.

Uploaded by

Josue Acosta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Apogee 234 XL CROSSOVER

PROCESADORES

3 vías estéreo o 4 vías mono


Filtro Low-Cut de 40 Hz para ambos canales
Conmutador de factor con rango x10
Fuente de alimentación interna
2 entradas XLR y 6 salidas XLR
Conmutador de inversión de fase en cada salida
Formato 19″ 1U

INPUT:

 Connectors: XLR
 Type: Electronically balanced/unbalanced, RF filtered
 Impedance: Balanced >50k ohm, unbalanced >25k ohm
 Max Input Level: >+21dBu balanced or unbalanced
 CMRR: >40dB, typically >50dB at 1kHz
OUTPUTS:

 Connectors: XLR
 Type: Impedance-balanaced/unbalanced, RF filtered
 Impedance: Balanced 200 ohm, unbalanced 100 ohm
 Max Output Level: >+21dBu balanced/unbalanced into 2k or greater
SYSTEM PERFORMANCE:

 Bandwidth: 20Hz to 20kHz, +/-0.5dB


 Frequency Response: < 3 Hz to > 90 kHz, +0/-3 dB
 Signal-to-Noise: Ref: +4 dBu, 22 kHz measurement bandwidth
 Stereo Mode >94dB (Low Output) | >93dB (Mid Output) | >92dB (High
Output)
 Mono Mode: >94dB (Low Output) | >94dB (Low/Mid Output) | >92dB
(High/Mid Output) |>92dB (High Output)
 Dynamic Range: > 114 dB, unweighted, any output
 THD + Noise: < 0.004% at +4 dBu, 1 kHz | < 0.04% at +20 dBu, 1 kHz
 Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
CROSSOVER FREQUENCIES:

 Stereo Mode: Low/High 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)


 Mono Mode: Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
 High-Mid/High: 450 Hz to 9.6 kHz
 Low-Mid/High-Mid: 450 Hz to 9.6 kHz
 Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
FUNCTION SWITCHES:

 Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-


pass filter, one switch per channel
 Phase Invert: Inverts the phase at the output, one switch per output
 Rear Panel: x1 / x10:Multiplies the low-high(mono: low/mid and high/mid)
crossover frequency range of the front-panel markings by a factor of 1 or
10, one switch per channel
 Mode: Selects stereo 2-way, 3-way or mono 4-way operation and
disables all LEDs for controls that are non-functional in the mono mode
 LF sum: Selects normal (stereo) or mono-summed low frequency
operation and disables Ch 2’s low output phase invert LED to indicate
that this output is not operational in the LF sum mode
INDICATORS:

 Stereo Operation: Green LED


 Mono Operation: Yellow LED
 Low Cut: Red LED per channel
 x10: Green LED per channel
 Phase Invert: Red LED per output (3 per channel)

You might also like