PRODUCT DATA SHEET

Sikaflex®-221
Multi-purpose adhesive sealant with a wide adhesion range

TYPICAL PRODUCT DATA (FURTHER VALUES SEE SAFETY DATA SHEET)

Chemical base 1-component polyurethane
Color (CQP001-1) White, aluminum gray, black, colonial white
Cure mechanism Moisture-curing
Density depending on color 1.3 kg/l (10.8 lb/gal)
Non-sag properties Good
Application temperature ambient 5 ─ 40 °C (41 ─ 104 °F)
Skin time (CQP019-1) 60 minutes A
Open time (CQP526-1) 45 minutes A
Curing speed (CQP049-1) (see diagram)
Shrinkage (CQP014-1) 5%
Shore A hardness (CQP023-1 / ISO 48-4) 40
Tensile strength (CQP036-1 / ISO 527) 1.8 MPa (260 psi)
Elongation at break (CQP036-1 / ISO 527) 500 %
Tear propagation resistance (CQP045-1 / ISO 34) 7 N/mm (40 pli)
Service temperature (CQP513-1) -50 ─ 90 °C (-58 ─ 194 °F)
24 hours 120 °C (248 °F)
1 hour 140 °C (284 °F)
Shelf life (CQP016-1) cartridge / unipack 12 months B
pail / drum 6 months B
CQP = Corporate Quality Procedure A) 23 °C (73 °F) / 50 % r.h. B) storage below 25 °C (77 °F)

DESCRIPTION PRODUCT BENEFITS AREAS OF APPLICATION

Sikaflex®-221 is a multi-purpose ▪ Bonds well to a wide variety of substrates Sikaflex®-221 bonds well to a wide variety
1-component polyurethane adhesive / ▪ Resistant to aging of substrates and is suitable for making
sealant that bonds well to a wide variety of ▪ Can be sanded and painted perman- ent elastic seals . Suitable substrate
substrates like metals, concrete, metal primers ▪ Listed under NSF/ANSI/CAN 61 ─ Drinking materials are metals, concrete, metal
and paint coatings (2-component systems), Water System Components (aluminum gray, primers and paint coatings (2-component
ceramic materials and plastics. It is suitable black, and white) systems), ceramic materials and plastics. It is
for making permanent elastic seals. ▪ Listed under NSF ─ Proprietary Substances ideally used for internal and external
and Nonfood Compounds (aluminum gray, sealing and simple bonding applications.
black, and white) Seek manufacturer’s advice and perform
▪ Non-corrosive tests on original substrates before using
▪ Low odor Sikaflex®- 221 on materials prone to stress
cracking. This product is suitable for
experienced professional users only.
Test with actual substrates and conditions
have to be performed to ensure adhesion
and ma terial compatibility.

PRODUCT DATA SHEET

Sikaflex®-221
Version 04.02 (04 - 2022), en_US
012001202210001000

1/2
CURE MECHANISM Tooling and finishing BASIS OF PRODUCT DATA
Sikaflex®-221 cures by reaction with atmo- Tooling and finishing must be carried out within All technical data stated in this document are
spheric moisture. At low temperatures the wa- the skin time of the sealant. It is recommended based on laboratory tests. Actual measured
ter content of the air is generally lower and the using Sika® Slick. Other finishing agents must data may vary due to circumstances beyond
curing reaction proceeds somewhat slower (see be tested for suitability and compatibility prior our control.
diagram 1). the use.
ENVIRONMENTAL, HEALTH AND
Removal SAFETY
Uncured Sikaflex®-221 can be removed from For further information and advice regarding
tools and equipment with Sika® Remover-208 transportation, handling, storage and disposal
or another suitable solvent. Once cured, the of chemical products, user should refer to the
material can only be removed mechanically. actual Safety Data Sheets containing physical,
Hands and exposed skin have to be washed im- environmental, toxicological and other safety
mediately using a suitable industrial hand related data. User must read the current actual
cleaner and water. Safety Data Sheets before using any products.
Do not use solvents on skin. In case of an emergency, call CHEMTREC at 1-
800-424-9300, International 703-527-3887.
Overpainting
Sikaflex®-221 can be painted after formation of LEGAL DISCLAIMER
a skin. If the paint requires a baking process, Prior to each use of any product of Sika Corpor-
best performance is achieved by allowing the ation, its subsidiaries or affiliates (“SIKA”), the
Diagram 1: Curing speed for Sikaflex®-221
sealant to fully cure first. 1C-PUR and 2C-acrylicuser must always read and follow the warnings
based paints are usually suitable. All paints and instructions on the product’s most current
CHEMICAL RESISTANCE product label, Product Data Sheet and Safety
Sikaflex®-221 is generally resistant to fresh wa- have to be tested by carrying preliminary trials
under manufacturing conditions. The elasticity Data Sheet which are available at usa.sika.com
ter, seawater, diluted acids and diluted caustic
of paints is usually lower than of sealants what or by contacting SIKA’s Technical Service De-
solutions; temporarily resistant to fuels, miner-
could lead to cracking of the paint film in the partment via email at [email protected].
al oils, vegetable and animal fats and oils; not
joint area. Nothing contained in any SIKA literature or ma-
resistant to organic acids, glycolic alcohol, con-
terials relieves the user of the obligation to
centrated mineral acids and caustic solutions or
FURTHER INFORMATION read and follow the warnings and instructions
solvents.
The information herein is offered for general for each SIKA product as set forth in the current
METHOD OF APPLICATION guidance only. Advice on specific applications is product label, Product Data Sheet and Safety
Surface Preparation available on request from the Technical Depart- Data Sheet prior to use of the SIKA product.
ment of Sika Industry. SIKA warrants this product for one year from
Surfaces must be clean, dry and free from
grease, oil and dust. Copies of the following publications are avail- date of installation to be free from manufactur-
able on request: ing defects and to meet the technical proper-
Surface treatment depends on the specific
▪ Safety Data Sheets ties on the current Product Data Sheet if used
nature of the substrates and is crucial for a long
▪ Sika Pre-treatment Chart as directed within the product’s shelf life. User
lasting bond. Suggestions for surface prepara-
Polyurethane determines suitability of product for intended
tion may be found on the current edition of the
▪ General Guidelines use and assumes all risks. User’s and/or buyer’s
appropriate Sika® Pre-Treatment Chart. Con-
Bonding and Sealing with Sikaflex® and sole remedy shall be limited to the purchase
sider that these suggestions are based on ex-
SikaTack® price or replacement of this product exclusive
perience and have in any case to be verified by
of any labor costs. NO OTHER WARRANTIES EX-
tests on original substrates. PACKAGING INFORMATION PRESS OR IMPLIED SHALL APPLY INCLUDING
Application Cartridge 300 ml ANY WARRANTY OF MERCHANTABILITY OR FIT-
Sikaflex®-221 can be processed between 5 °C NESS FOR A PARTICULAR PURPOSE. SIKA SHALL
400 ml NOT BE LIABLE UNDER ANY LEGAL THEORY FOR
and 40 °C (41 °F and 104 °F) but changes in re- Unipack
activity and application properties have to be 600 ml SPECIAL OR CONSEQUENTIAL DAMAGES. SIKA
considered. The optimum temperature for sub- Pail 4.5 gal (US) SHALL NOT BE RESPONSIBLE FOR THE USE OF
strate and sealant is between 15 °C and 25 °C THIS PRODUCT IN A MANNER TO INFRINGE ON
(59 °C and 77 °F). Drum 50 gal (US) ANY PATENT OR ANY OTHER INTELLECTUAL
Sikaflex®-221 can be processed with hand, PROPERTY RIGHTS HELD BY OTHERS. Sale of
pneumatic or electric driven piston guns as well SIKA products are subject to the Terms and
as pump equipment. For advice on selecting Conditions of Sale which are available at ht-
and setting up a suitable pump system, contact tps://usa.sika.com/en/group/SikaCorp/term-
the System Engineering Department of Sika In- sandconditions.html or by calling +1 800-933-
dustry. 7452.

PRODUCT DATA SHEET Sika Corporation

Sikaflex®-221 30800 Stephenson Highway
Version 04.02 (04 - 2022), en_US Madison Heights, MI 48071
012001202210001000 U.S.A.
Telephone: +1 248-577-0020
Email: [email protected]
www.sikausa.com

2/2