trims and perimeters

trim compatibility table bulkhead trims and tee sections

channel trims blind boxes
angle trims dry lining
metal tile to plasterboard trim and perimeter accessories
system 130 to plasterboard trim and perimeter silhouettes

SAS International www.sasintgroup.com

 The aesthetic quality of an interior space is greatly
trims and perimeters

enhanced by the attention given to the finer details.

This is particularly important when the slightest flaw
draws attention. The interface between different
building fabrics is a critical factor in the appearance of
the overall interior finishes. Well designed features such
as Bulkheads, changes of ceiling level and plasterboard
perimeters considerably enhance the aesthetic interest
of an interior.
SAS Trims and Perimeters are an extensive range of
extrusions that has been specifically developed to
provide the opportunity to create interesting features
with crisp clean interface details for suspended ceiling
and drywall installations. The advantages of aluminium
trims and perimeters are:
• The precise alignment between sections
• Easy installation
• Exterior quality polyester powder finish as standard
• Custom-made extrusions available
Finishes
• Products are extruded from aluminium alloy
• Products are normally supplied with an
electrostatically applied polyester powder finish to
exterior quality BS6496,
• Tested to achieve a 1000 hour salt spray test
performance
• The standard colour is RAL9010 20% gloss,
alternative colours can be selected from the BS and
RAL ranges
Special finishes are also available on request:
• SAS FT (Fine-textured), see page 36 for further
details
• SAS AB (Anti-bacterial), see page 36 for further
details
• Anodised in all colours
• Polished and chemically brightened in either silver,
gold, copper and brass
• High porosity primer is available for dry lining profiles
to provide greater adhesion for conventional drywall
jointing and finishing compounds

SAS International www.sasintgroup.com

Suspended Ceiling Applications Important: Plasterboard should be independently

trims and perimeters

Perimeter Trims supported for margin widths over 450mm. The range of
The SAS extensive range of perimeter trims is designed tile to plasterboard trims is designed to accommodate
to accommodate all types of suspended ceiling systems all ceiling types with a choice of shadowgap options.
by masking the edges of tiles at both the perimeters and A number of trims feature tapered fins that permit the
penetration points. Shadowgap style perimeter trims use of conventional tape and joint finishes to achieve a
provide an additional attractive feature detail. smooth interface with the plasterboard.
Channel trims are generally used for masking the cut A range of plasterboard perimeter trims and shadowgaps
edges of metal ceiling tiles. Wedges hold the tile edge provide appropriate matching details between the
tightly in place to give a clean finish. Threaded trims are plasterboard and the wall.
designed to match the thread-form details of Alugrid-Q Plasterboard Bulkhead/Change of Ceiling Level
and are used on full tile perimeter details. Plasterboard upstand trims can be used to create low
Angle trims are designed for Trucell, mineral fibre and cost bulkhead and changes in ceiling level features. The
GRG ceiling tile systems. appropriate perimeter trim or shadowgap should be
used to support and mask the edge of the higher level
Column Rings and Radiused Trims
ceiling tiles or plasterboard.
Perimeter trims and shadowgap sections can be rolled
to form radiused profiles and circular column rings to Metal Tile Bulkheads & Change of Ceiling Level
match perimeter details. Rectangular column trims can Metal bulkheads can be constructed using aluminium
be supplied prefabricated for easy on-site installation. extrusions and standard metal tiles. Vertical bulkhead
These are normally supplied in two parts. A list of trims sections are available to create an attractive feature:
that are suitable for rolling or highlighted on pages a change in ceiling level or an interface with another
118–119. building element. By using standard products, these
When specifying or ordering radiused trims it is extrusions offer a high quality low cost solution that
necessary to state whether they are required toe-in or is ideal for modest budgets or smaller projects where
toe-out, further details are available on page 135. special fabrication is not feasible.
Plasterboard Perimeters Partition Head Fixing to Threaded Tee Sections
A plasterboard margin can provide an attractive feature A number of tee sections incorporate a continuous M6
to a suspended ceiling and minimises the need for cut thread form to provide a fixing point and give lateral
tiles. This solution is particularly effective for irregular restraint to partition systems. This thread form can also
perimeters, corridors and small cellular spaces with be used for fixing lightweight signs and fixtures.
existing structural walls.

SAS International www.sasintgroup.com

trims compatibility table

Item Suitable * Page

Extrusion Description Compatible Systems
No for rolling no.
120 130 150 200 330 Trucell
FAB 0124 N/A 15mm x 15mm Shadow Gap 20mm Channel Trim Fabricated • • • • • • 120
FAB 0128 N/A 20mm x 20mm Shadow Gap 20mm Channel Trim Fabricated • • • • • • 120
FAB-SJ-150 N/A Cut Metal Tile to Plasterboard 15mm Shadow Gap Trim Fabricated • • • • • • 123
FAB-ST-150 N/A 15mm x 15mm Shadow Gap Plasterboard Trim Fabricated • • • • • • • 122
TRU-SW-1508 22434 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
127
(Plain to Suit P15/08)
FAB-TJ-P1508 22437 System 130 Full Metal Tile to Plasterboard Trim (Plain to Suit P15/08) • 126
TCA 0101 10538 15mm Perimeter Angle Trim • • • • • • • 121
TCA 0105 10539 20mm Perimeter Angle Trim • • • • • • • 121
TCA 0107 10540 20mm Extended Leg Perimeter Angle Trim • • • • • • • 121
TCA 0108 10541 20mm Channel Trim • • • • • • 120
TCA 0109 10542 20mm Extended Top Leg Channel Trim • • • • • • 120
TCA 0110 10543 20mm Extended Leg Channel Trim • • • • • • 120
TCA 0113 10544 25mm Perimeter Angle Trim • • • • • • • 121
TCA 0123 10545 15mm x 15mm Shadow Gap 20mm Angle Trim • • • • • • • 121
TCA 0124 10546 15mm x 15mm Shadow Gap 20mm Channel Trim • • • • • • 120
TCA 0127 10547 20mm x 20mm Shadow Gap 20mm Angle Trim • • • • • • • 121
TCA 0128 10548 20mm x 20mm Shadow Gap 20mm Channel Trim • • • • • • 120
TCA 0133 10549 25mm x 25mm Shadow Gap 25mm Channel Trim • • • • • • 120
TCA 0141 10550 Cut Metal Tile to Plasterboard 15mm Shadow Gap Trim • • • • • • 123
TCA 0144 14075 Full Metal Tile to Plasterboard 20mm Shadow Gap Trim • • • • • • • 123
TCA 0145 10551 Cut Metal Tile to Plasterboard 20mm Shadow Gap Trim • • • • • • 123
TCA 0149 22901 Full Metal Tile to Plasterboard 25mm Shadow Gap Trim • • • • • • • 123
TCA 0152 10552 Plasterboard Perimeter Trim • • • • • • • 121
TCA 0153 10553 Bevelled Plasterboard Perimeter Trim • • • • • • • 121
TCA 0154 10554 Extended Leg Plasterboard Perimeter Trim • • • • • • • 122
TCA 0155 10555 15mm x 15mm Shadow Gap Plasterboard Trim • • • • • • • 122
TCA 0157 10556 20mm x 20mm Shadow Gap Plasterboard Trim • • • • • • • 122
TCA 0169 10697 Cut Metal Tile to Vertical Plasterboard Bulkhead Trim • • • • • • 128
TCA 0173 10557 Cut Metal Tile to Vertical Plasterboard Bulkhead Trim • • • • • • 128
TCA 0187 10559 System 130 Full Metal Tile to Plasterboard Trim (Threaded to Suit Q15/08) • 125
TCA 0188 10560 System 130 Full Metal Tile to Plasterboard Trim •
125
(Threaded to Suit Q15/16 & Q15/19)
TCA 0190 14083 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
126
(Threaded to Suit Q15/16 & Q15/19)
TCA 0204 10561 Full Metal Tile 25mm Tee Section Trim • • • • • • • 128
TCA 0207 10562 Full Metal Tile 30mm Tee Section Trim • • • • • • • 128
TCA 0209 10563 Full Metal Tile 39mm Tee Section Trim • • • • • • • 129
TCA 0210 14089 Full Metal Tile 40mm Threaded Tee Section Trim • • • • • • 129
TCA 0215 14091 Cut Metal Tile 40mm Mitre Junction Trim • • • • • 129
TCA 0219 10564 Full Metal Tile to Vertical Plasterboard Trim • • • • • • • 129
TCA 0310 10565 Cut Metal Tile 100mm Mitre Junction Trim • • • • • 129
TCA 0312 14103 100mm Blind Box Cannel Trim • • • • • 130
TCA 0313 14105 Threaded C-Profile 50mm wide • • 129
TCA 0314 14110 Threaded C-Profile 40mm wide • • 129
TCA 0317 22427 100mm Blind Box Angle Trim • • • • • • 130
TCA 1124 14130 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
127
(Plain to Suit P15/16)
TCA 1127 10566 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
127
(Plain to Suit P15/16)
TCA 1130 14131 Cut Metal Tile to Vertical Cut Metal Tile Bulkhead Trim • • • • • 128
TCA 1131 14133 Cut Metal Tile to Vertical Cut Metal Tile Bulkhead Trim • • • • • 128
TCA 1132 14134 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
127
(Plain to Suit P15/08)
TCA 1133 14135 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
126
(Plain to Suit P15/08)
TCA 1136 14136 System 330 Full Metal Tile to Vertical Plasterboard Perimeter Trim • 128

* see page 135 for further details

SAS International www.sasintgroup.com

 trims compatibility table
Item Suitable * Page
Extrusion Description Compatible Systems
No for rolling no.
120 130 150 200 330 Trucell
TCA 1147 14139 98mm Blind Box Plasterboard Trim • • • • • • 130
TCA 1182 22428 C-Profile 40mm wide • • 129
TRU-B-1000 14188 Radiused End Trim 131
TRU-CS-125 22430 Corner Step Trim 131
TRU-CS- 22431 Triple Corner Step Trim
131
125-125-125
TRU-ET-125 10575 12.5mm Edge Trim • 131
TRU-ET-125F 10574 12.5mm Flexible Edge Trim 131
TRU-ET-150 10576 15mm Edge Trim • 132
TRU-ET-150F 22432 15mm Flexible Edge Trim 132
TRU-ET-250 10577 25mm Edge Trim • 132
TRU-HO-1516 14159 System 130 Alugrid 15/16 to Feathered Plasterboard Trim • 125
TRU-HR-125 22433 Linear Hanging Reveal Trim 132
TRU-IC-600 14186 90º Inside Corner 60mm Radius Trim 132
TRU-LK-330 14232 System 330 Full tile to Plasterboard 15mm Shadow Gap Trim • 124
TRU-MJ-150 10586 Cut Metal Tile to Plasterboard Trim • • • • • 123
TRU-OC-90 10572 High Strength Corner Trim 133
TRU-OC-250 14187 90º Outside Corner 25mm Radius Trim 133
TRU-OC-600 15510 90º Outside Corner 60mm Radius Trim 133
TRU-OC-750 15509 90º Outside Corner 75mm Radius Trim 133
TRU-PB-330 10588 System 330 Full tile to Plasterboard 15mm Shadow Gap Trim • 124
TRU-PT-250 10585 25mm Feathered Extended Leg Plasterboard Trim • • • • • • 122
TRU-RT-125 10571 12.5mm Reveal Trim • 133
TRU-RT-150 10578 15mm Reveal Trim • 133
TRU-RT-250 10573 25mm Reveal Trim • 133
TRU-RT-250D 14205 25mm Reveal Trim (Suitable for 15mm Deep Plasterboard) 133
TRU-SG-150 10582 System 150 Full Tile to Plasterboard 15mm Shadow Gap Trim • • 124
TRU-SH-150 14224 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim • • • • • • • 123
TRU-SJ-150 10580 Cut Metal Tile to Plasterboard 15mm Shadow Gap Trim • • • • • • 123
TRU-SJ-1516 10570 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
126
(Threaded to Suit Q15/16 & Q15/19)
TRU-SJ-2616 10567 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
126
(Threaded to Suit Q26/16)
TRU-SJ-330 10587 System 330 Full tile to Plasterboard 15mm Shadow Gap Trim • 124
TRU-SJ-T1508 22435 System 130 Full Tile to Plasterboard Trim (T15) • 125
TRU-SJ-T1516 10591 System 130 Full Tile to Plasterboard Trim (T15) • 125
TRU-SJ-T2408 10589 System 130 Full Tile to Plasterboard Trim (T15) • 125
TRU-SJ-T2416 10590 System 130 Full Tile to Plasterboard Trim (T15) • 125
TRU-SK-25 14174 25mm Recessed Skirting Trim 134
TRU-SK-100 14172 100mm Recessed Skirting Trim 134
TRU-SS-150 10581 System 150 Full Tile to Plasterboard Trim • 124
TRU-ST-150 10579 15mm x 15mm Shadow Gap Plasterboard Trim • • • • • • 122
TRU-SW-1516 10699 System 130 Full Metal Tile to Plasterboard 15mm Shadow Gap Trim •
127
(Plain to Suit P15/16)
TRU-TJ-330 14223 System 330 Full Tile to Plasterboard Trim • 124
TRU-TJ-1508 14201 System 130 Full Metal Tile to Plasterboard Trim (Threaded to Suit Q15/08) • 125
TRU-TJ-1516 10584 System 130 Full Metal Tile to Plasterboard Trim •
126
(Threaded to Suit Q15/16 & Q15/19)
TRU-TJ-2616 22436 System 130 Full Metal Tile to Plasterboard Trim (Threaded to Suit Q26/16) • 126
TRU-TJ-P1516 14334 System 130 Full Metal Tile to Plasterboard Trim (Plain to Suit P15/16) • 126
TRU-US-150 10583 System 150 Full Metal Tile to Vertical Plasterboard Bulkhead Trim • 128
TRU-VD-1250 14220 Variable Depth Edge Trim (15mm - 125mm) 134
TRU-WR-125 14168 12.5mm Linear Reveal Trim 134
TRU-WR-250 14180 25mm Linear Reveal Trim 134
TRU-Z-125 14167 12.5mm Step Reveal Trim 134
TRU-Z-250 14179 25mm Step Reveal Trim 134
* see page 135 for further details

SAS International www.sasintgroup.com

channel trims for metal ceilings

60
38

38
20
20

TCA 0108: 20mm Channel TCA 0110: 20mm Extended Leg Channel
Item Number: 10541 Length (mm): 3000 Item Number: 10543 Length (mm): 3000
Accessories: TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCP90, TCP180, TCP360, Perimeter Wedge
45

38
38

15
15

15 20 15 20

TCA 0124: 15mmx15mm Shadowgap, 20mm Channel FAB 0124: 15mmx15mm Shadowgap, 20mm Channel
for curved trims
Item Number: 10546 Length (mm): 3000 Item Number: N/A Length (mm): 3000
Accessories: TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCP90, TCP180, TCP360, Perimeter Wedge
40

38
38

20
20

20 20
20 20

TCA 0128: 20mmx20mm Shadowgap, 20mm Channel FAB 0128: 20mmx20mm Shadowgap, 20mm Channel
for curved trims
Item Number: 10548 Length (mm): 3000 Item Number: N/A Length (mm): 3000
Accessories: TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCP90, TCP180, TCP360, Perimeter Wedge

35
40

42
38
25

20
25 25

TCA 0133: 25mmx25mm Shadowgap, 25mm Channel TCA 0109: 20mm Extended Top Leg Channel
Item Number:10549 Length (mm): 3000 Item Number: 10542 Length (mm): 3000
Accessories: TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCP90, TCP180, TCP360, Perimeter Wedge

SAS International www.sasintgroup.com

 angle trims for metal, open cell & mineral fibre
38
32

15 20

TCA 0101: 15mm Perimeter Angle Trim TCA 0105: 20mm Perimeter Angle Trim
Item Number: 10538 Length (mm): 3000 Item Number: 10539 Length (mm): 3000
Accessories: TCP101090, TCP101180 Accessories: TCP90, TCP180, TCP360
60

38
25

20

TCA 0107: 20mm Extended Leg Perimeter Angle Trim TCA 0113: 25mm Perimeter Angle Trim
Item Number: 10540 Length (mm): 3000 Item Number: 10544 Length (mm): 3000
Accessories: TCP90, TCP180, TCP360 Accessories: TCP90, TCP180, TCP360
40
45

20
15

15 20 20 20

TCA 0123: 15mm x 15mm Shadow Gap 20mm Angle Trim TCA 0127: 20mm x 20mm Shadow Gap 20mm Angle Trim
Item Number: 10545 Length (mm): 3000 Item Number: 10547 Length (mm): 3000
Accessories: TCP90, TCP180, TCP360 Accessories: TCP90, TCP180, TCP360

30 35
16

16

6 11

TCA 0152: Plasterboard Perimeter Trim TCA 0153: Bevelled Plasterboard Perimeter Trim
Item Number: 10552 Length (mm): 3000 Item Number: 10553 Length (mm): 3000
Accessories: N/A Accessories: N/A

SAS International www.sasintgroup.com

angle trims for metal, open cell & mineral fibre

30

41

53
6
25

TCA 0154: Extended Leg Plasterboard Perimeter Trim TRU-PT-250: 25mm Feathered Extended Leg Plasterboard Trim
Item Number: 10554 Length (mm): 3000 Item Number: 10585 Length (mm): 3000
Accessories: N/A Accessories: TCB01, TCB08, TCP90, TC180, TCP360, Perimeter
Wedge
25

25
15

15
15 21 15 21

TRU-ST-150: 15mm x 15mm Shadow Gap Plasterboard Trim FAB-ST-150: 15mm x 15mm Shadow Gap Plasterboard Trim
for curved trims
Item Number: 10579 Length (mm): 3000 Item Number: N/A Length (mm): 3000
Accessories: N/A Accessories: N/A 25
25
15

20

15 6
20 6

TCA 0155: 15mm x 15mm Shadow Gap Plasterboard Trim TCA 0157: 20mm x 20mm Shadow Gap Plasterboard Trim
Item Number: 10555 Length (mm): 3000 Item Number: 10556 Length (mm): 3000
Accessories: N/A Accessories: N/A

SAS International www.sasintgroup.com

 metal tile to plasterboard trims
38

38
20 25 20 15 6

TRU-MJ-150: Cut Metal Tile to Plasterboard Trim TCA 0141: Cut Metal Tile to Plasterboard 15mm Shadow Gap
Trim
Item Number: 10586 Length (mm): 3000 Item Number: 10550 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, PW* Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, PW*

38
38

20 15 21
20 15 21

TRU-SJ-150: Cut Metal Tile to Plasterboard 15mm Shadow FAB-SJ-150: Cut Metal Tile to Plasterboard 15mm Shadow
Gap Trim Gap Trim for curved trims
Item Number: 10580 Length (mm): 3000 Item Number: N/A Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, PW* Accessories: TCP90, TCP180, TCP360, PW*
38

20 20 6
20 15 20

TCA 0145: Cut Metal Tile to Plasterboard 20mm Shadow Gap TRU-SH-150: Full Metal Tile to Plasterboard 15mm Shadow
Trim Gap Trim
Item Number: 10551 Length (mm): 3000 Item Number: 14224 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, PW* Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, PW*

20 20 6 25 25 6

TCA 0144: Full Metal Tile to Plasterboard 20mm Shadow Gap TCA 0149: Full Metal Tile to Plasterboard 25mm Shadow Gap
Trim Trim
Item Number: 14075 Length (mm): 3000 Item Number: 22901 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
* PW = Perimeter Wedge

SAS International www.sasintgroup.com

metal tile to plasterboard trims

42.75

42.75
31 15 31

TRU-SS-150: System 150 Full Tile to Plasterboard Trim TRU-SG-150: System 150 Full Tile to Plasterboard 15mm
Shadow Gap Trim
Item Number: 10581 Length (mm): 3000 Item Number: 10582 Length (mm): 3000
Accessories: N/A Accessories: N/A

20
30

10
25 21 15 21

TRU-TJ-330: System 330 Full Tile to Plasterboard Trim TRU-PB-330: System 330 Full tile to Plasterboard 15mm
Shadow Gap Trim
Item Number: 14223 Length (mm): 3000 Item Number: 10588 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90s, TCP180s, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
30
30

20 15 21 25 15 21

TRU-LK-330: System 330 Full tile to Plasterboard 15mm TRU-SJ-330: System 330 Full tile to Plasterboard 15mm
Shadow Gap Trim Shadow Gap Trim
Item Number: 14232 Length (mm): 3000 Item Number: 10587 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90s, TCP180s, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360

SAS International www.sasintgroup.com

 system 130 to plasterboard trims
16 *
8*

15 25 15 25

TRU-SJ-T1508: System 130 Full Tile to Plasterboard Trim (T15) TRU-SJ-T1516: System 130 Full Tile to Plasterboard Trim (T15)
Item Number: 22435 Length (mm): 3000 Item Number: 10591 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, 21566 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, 21566

16 *
8*

24 15 24 15

TRU-SJ-T2408: System 130 Full Tile to Plasterboard Trim (T15) TRU-SJ-T2416: System 130 Full Tile to Plasterboard Trim (T15)
Item Number: 10589 Length (mm): 3000 Item Number: 10590 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, 21566 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360, 21566
18 *

8*

27
20

TRU-HO-1516: System 130 Alugrid 15/16 to Feathered TCA 0187: System 130 Full Metal Tile to Plasterboard Trim
Plasterboard Trim (Threaded to Suit Q15/08)
Item Number: 14159 Length (mm): 3000 Item Number: 10559 Length (mm): 3000
Accessories: N/A Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
16 *
8*

16.75 25 20

TRU-TJ-1508: System 130 Full Metal Tile to Plasterboard Trim TCA 0188: System 130 Full Metal Tile to Plasterboard Trim
(Threaded to Suit Q15/08) (Threaded to Suit Q15/16 & Q15/19)
Item Number: 14201 Length (mm): 3000 Item Number: 10560 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
* Nominal height shown

SAS International www.sasintgroup.com

system 130 to plasterboard trims

16 *

8*
16.8 25 16.8 25

TRU-TJ-1516: System 130 Full Metal Tile to Plasterboard Trim FAB-TJ-P1508: System 130 Full Metal Tile to Plasterboard
(Threaded to Suit Q15/16 & Q15/19) Trim (Plain to Suit P15/08)
Item Number: 10584 Length (mm): 3000 Item Number: 22437 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
16 *

16 *
16.8 25 25.8 25

TRU-TJ-P1516: System 130 Full Metal Tile to Plasterboard TRU-TJ-2616: System 130 Full Metal Tile to Plasterboard Trim
Trim (Plain to Suit P15/16) (Threaded to Suit Q26/16)
Item Number: 14334 Length (mm): 3000 Item Number: 22436 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
16 *
16 *

15 15 25
15 15 6

TCA 0190: System 130 Full Metal Tile to Plasterboard 15mm TRU-SJ-1516: System 130 Full Metal Tile to Plasterboard
Shadow Gap Trim (Threaded to Suit Q15/16 & Q15/19) 15mm Shadow Gap Trim (Threaded to Suit Q15/16 & Q15/19)
Item Number: 14083 Length (mm): 3000 Item Number: 10570 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
16 *

8*

25.8 15 25
15 15 6

TRU-SJ-2616: System 130 Full Metal Tile to Plasterboard TCA 1133: System 130 Full Metal Tile to Plasterboard 15mm
15mm Shadow Gap Trim (Threaded to Suit Q26/16) Shadow Gap Trim (Plain to Suit P15/08)
Item Number: 10567 Length (mm): 3000 Item Number: 14135 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
* Nominal height shown

SAS International www.sasintgroup.com

 system 130 to plasterboard trims
16 *

8*
15 15 6 20 15 6

TCA 1127: System 130 Full Metal Tile to Plasterboard 15mm TCA 1132: System 130 Full Metal Tile to Plasterboard 15mm
Shadow Gap Trim (Plain to Suit P15/16) Shadow Gap Trim (Plain to Suit P15/08)†
Item Number: 10566 Length (mm): 3000 Item Number: 14134 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
16 *

8*
20 15 6
15 15 21

TCA 1124: System 130 Full Metal Tile to Plasterboard 15mm TRU-SW-1508: System 130 Full Metal Tile to Plasterboard
Shadow Gap Trim (Plain to Suit P15/16)† 15mm Shadow Gap Trim (Plain to Suit P15/08)
Item Number: 14130 Length (mm): 3000 Item Number: 22434 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
16 *

15 15 21

TRU-SW-1516: System 130 Full Metal Tile to Plasterboard

15mm Shadow Gap Trim (Plain to Suit P15/16)
Item Number: 10699 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360

* Nominal height shown

† Suitable for mitreing with 20mm channel/angle trims

SAS International www.sasintgroup.com

bulkhead trims & tee sections

42.75

42

38
15 16

20

TRU-US-150: System 150 Full Metal Tile to Vertical TCA 0169: Cut Metal Tile to Vertical Plasterboard Bulkhead
Plasterboard Bulkhead Trim Trim
Item Number: 10583 Length (mm): 3000 Item Number: 10697 Length (mm): 3000
Accessories: N/A Accessories: TCP90, TCP180, TCP360, Perimeter Wedge

38
60

38

30
13

15
34 25 15

TCA 0173: Cut Metal Tile to Vertical Plasterboard Bulkhead TCA 1136: System 330 Full Metal Tile to Vertical Plasterboard
Trim Perimeter Trim, 15mm Shadowgap
Item Number: 10557 Length (mm): 3000 Item Number:14136 Length (mm): 3000
Accessories: TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCP90, TCP180, TCP360, Perimeter Wedge
38 56.4
60

60
38

38
20

56.4 20 38

TCA 1130: Cut Metal Tile to Vertical Cut Metal Tile Bulkhead TCA 1131: Cut Metal Tile to Vertical Cut Metal Tile Bulkhead
Trim Trim
Item Number: 14131 Length (mm): 3000 Item Number:14133 Length (mm): 3000
Accessories: TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCP90, TCP180, TCP360, Perimeter Wedge
38

38

25 30

TCA 0204: Full Metal Tile 25mm Tee Section Trim TCA 0207: Full Metal Tile 30mm Tee Section Trim
Item Number:10561 Length (mm): 3000 Item Number: 10562 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360

SAS International www.sasintgroup.com

 bulkhead trims & tee sections
38
38

39 40

TCA 0209: Full Metal Tile 39mm Tee Section Trim TCA 0210: Full Metal Tile 40mm Threaded Tee Section Trim
Item Number: 10563 Length (mm): 3000 Item Number: 14089 Length (mm): 3000
Accessories: TCB01, TCB08, TCP90, TCP180, TCP360 Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
50

60
38

40

40

TCA 0215: Cut Metal Tile 40mm Mitre Junction Trim TCA 0219: Full Metal Tile to Vertical Plasterboard Trim
Item Number: 14091 Length (mm): 3000 Item Number: 10564 Length (mm): 3000
Accessories: TCB12, TCP90, TCP180, TCP360, Perimeter Wedge Accessories: TCB01, TCB08, TCP90, TCP180, TCP360
30
38

50
100

TCA 0310: Cut Metal Tile 100mm Mitre Junction Trim TCA 0313: Linear Grid Section
Item Number: 10565 Length (mm): 3000 Item Number: 14105 Length (mm): 3000
Accessories: TCB60, TCP90, TCP180, TCP360, Perimeter Wedge Accessories: 21996 (pg151), 22005 (pg152), TCP90s, TCP180s
30

30

40
40

TCA 0314: Linear Grid Section TCA 1182: Linear Grid Section
Item Number: 14110 Length (mm): 3000 Item Number: 22428 Length (mm): 3000
Accessories: 22004 (pg151), 22006 (pg152), TCP90s, TCP180s Accessories: 22004 (pg151), 22006 (pg152), TCP90s, TCP180s

SAS International www.sasintgroup.com

blind box trims

34
100

76
100

38
TCA 0312: 100mm Blind Box Channel Trim
Item Number: 14103 Length (mm): 3000
20
Accessories: TCB50, TCP90, TCP180, TCP360, Perimeter Wedge

100
100

TCA 0317: 100mm Blind Box Angle Trim

Item Number: 22427 Length (mm): 3000 20

Accessories: TCB50, TCP90, TCP180, TCP360

98
100

TCA 1147: 98mm Blind Box Plasterboard Trim 25

Item Number: 14139 Length (mm): 3000

Accessories: TCB50, TCP90, TCP180, TCP360

SAS International www.sasintgroup.com

 dry lining trims
100
TRU-B-1000: Radiused End Trim

2
R5
19
Item Number: 14188 Length (mm): 3000
Accessories: N/A

20 8.5 8.5 8.5

21 12.5 12.5
12.5

12.5
21

12.5
19

TRU-CS-125: Corner Step Trim TRU-CS-125-125-125: Triple Corner Step Trim

Item Number: 22430 Length (mm): 3000 Item Number: 22431 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

15 15
21
21

12.5 12.5

TRU-ET-125: 12.5mm Edge Trim TRU-ET-125F: 12.5mm Flexible Edge Trim

Item Number: 10575 Length (mm): 3000 Item Number: 10574 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

SAS International www.sasintgroup.com

dry lining trims

17 17

21

21
15 15

TRU-ET-150: 15mm Edge Trim TRU-ET-150F: 15mm Flexible Edge Trim

Item Number: 10576 Length (mm): 3000 Item Number: 22432 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

21
27
21

10

31
25
21

TRU-ET-250: 25mm Edge Trim TRU-HR-125: Linear Hanging Reveal Trim

Item Number: 10577 Length (mm): 3000 Item Number: 22433 Length (mm): 3000
Accessories:: N/A Accessories:: N/A
0
R6

20

83

TRU-IC-600: 90º Inside Corner 60mm Radius Trim

Item Number: 14186 Length (mm): 3000
Accessories:: N/A

SAS International www.sasintgroup.com

 dry lining trims
5
R2
19 10

29
45

20
TRU-OC-90: High Strength Corner Trim TRU-OC-250: 90º Outside Corner 25mm Radius Trim
Item Number: 10572 Length (mm): 3000 Item Number: 14187 Length (mm): 3000
Accessories:: N/A Accessories:: N/A
80 95
0
R6

5
R7
19

20
TRU-OC-600: 90º Outside Corner 60mm Radius Trim TRU-OC-750: 90º Outside Corner 75mm Radius Trim
Item Number: 15510 Length (mm): 3000 Item Number: 15509 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

21
21
11

11

12.5 15

TRU-RT-125: 12.5mm Reveal Trim TRU-RT-150: 15mm Reveal Trim

Item Number: 10571 Length (mm): 3000 Item Number: 10578 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

21
21
15
11

25
25

TRU-RT-250: 25mm Reveal Trim TRU-RT-250D: 25mm Reveal Trim (Suitable for 15mm Deep Plasterboard)
Item Number: 10573 Length (mm): 3000 Item Number: 14205 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

SAS International www.sasintgroup.com

dry lining trims

12

20
20
25

100
TRU-SK-25: 25mm Recessed Skirting Trim TRU-SK-100: 100mm Recessed Skirting Trim
Item Number: 14174 Length (mm): 3000 Item Number: 14172 Length (mm): 3000
Accessories:: N/A Accessories:: N/A

20
Variable (15–125mm)

12.5
20
TRU-VD-1250: Variable Depth Edge Trim TRU-WR-125: 12.5mm Linear Reveal Trim
(15mm–125mm)
Item Number: 14220 Length (mm): 3000 Item Number: 14168 Length (mm): 3000
20
Accessories:: N/A Accessories:: N/A
20

19
25

20
20

TRU-WR-250: 25mm Linear Reveal Trim TRU-Z-125: 12.5mm Step Reveal Trim
Item Number: 14180 Length (mm): 3000 Item Number: 14167 Length (mm): 3000
Accessories:: N/A Accessories:: N/A
19
20

25

TRU-Z-250: 25mm Step Reveal Trim

Item Number: 14179 Length (mm): 3000
Accessories:: N/A

SAS International www.sasintgroup.com

When ordering any radiused trim it is necessary to In the case of Plasterboard perimeter trim where no

radiused trims defined

specify whether the trim is required Toe-In or Toe-Out. metal tiles are used the plasterboard takes primary
Where a radiused trim is in contact with a metal ceiling control in determining the toe. For example:
tile (tile perimeter trims or tile to plasterboard trim) the When using a Plasterboard Perimeter Trim such as
side that accepts the metal tile takes primary control in FAB‑ST‑150, Toe-In indicates the plasterboard support
determining the toe. For example: edge is rolled in towards the plasterboard. Toe-Out
When using a Tile Perimeter Trim such as TCA 0108, indicates the plasterboard support edge is rolled away
Toe-In indicates the “C-channel” that accepts the cut from the plasterboard.
metal tile is rolled in towards the metal tiles. Toe-Out
indicates the “C-channel” rolled away from the metal
tiles.
When using a Tile to Plasterboard Trim such as
FAB‑SJ‑150, Toe-In indicates the “C-channel” that
accepts the cut metal tile is rolled in towards the metal
tiles, and rolled away from the plasterboard. Toe-Out
indicates the “C-channel” is rolled away from the metal
tiles and rolled in towards the plasterboard.

Radiused TCA 0108 Toe-In Radiused TCA 0108 Toe-Out

metal ceiling tiles

metal ceiling tiles

perimeter wall
perimeter wall

Radiused FAB-SJ-150 Toe-In Radiused FAB-SJ-150 Toe-Out

metal ceiling tiles

metal ceiling tiles

plasterboard
plasterboard

Radiused FAB-ST-150 Toe-In Radiused FAB-ST-150 Toe-Out

perimeter wall
perimeter wall

plasterboard
plasterboard

SAS International www.sasintgroup.com

trim accessories

TCB 01: Extrusion to Emac Channel Hanger Bracket TCB 08: Extrusion to Emac Hanger Bracket
Item Number: 10529 Item Number: 10530

Perimeter Wedge TCP 360: Multi Splice

Item Number: 10178 Item Number: 14046

TCP 90: Corner Splice to suit 34.8mm keyway TCP 180: Straight Splice to suit 34.8mm keyway
Item Number: 10536 Item Number: 10534

TCP 90s: Corner Splice to suit 26.4mm keyway TCP 180s: Straight Splice to suit 26.4mm keyway
Item Number: 14047 Item Number: 14042

SAS International www.sasintgroup.com

 trims accessories
TCP 101090: Corner Splice to suit 30mm keyway TCP 101180: Straight Splice to suit 30mm keyway
Item Number: 22167 Item Number: 14041

TCB 12: TCA 0215 Hanger Bracket TCB 50: Blind Box Hanger to suit Threaded Rod
Item Number: 10531 Item Number: 22007

TCB 60: TCA 0310 Hanger Bracket to suit Threaded Rod C-Profile Extrusion Bracket for Emac Channel to suit TCA 0313
Item Number: 22008 Item Number: 21996

C-Profile Extrusion Bracket for Emac Channel to suit TCA 0314 C-Profile Extrusion Bracket for Emac Channel to suit TCA 1182
Item Number: 22004 Item Number: 22004

SAS International www.sasintgroup.com

 35
trims and perimeters silhouettes

60

60
38

38
38
38
32

15 20 20 20 20 20

TCA 0101 TCA 0105 TCA 0107 TCA 0108 TCA 0109 TCA 0110
(p 121) (p 121) (p 121) (p 120) (p 120) (p 120)

40
40
45
45
38

38
38
38

20
20
15
15
15

25 15 20 15 20 20 20 20 20
15 20

TCA 0113 TCA 0123 TCA 0124 FAB 0124 TCA 0127 TCA 0128
(p 121) (p 121) (p 120) (p 120) (p 121) (p 120)
40

38
38

38
25
20

20 20 25 25 20 15 6 20 20 6

FAB 0128 TCA 0133 TCA 0141 TCA 0144

(p 120) (p 120) (p 123) (p 123)

30

30 35
41
38

16

16

20 20 6 25 25 6 6 11 6

TCA 0145 TCA 0149 TCA 0152 TCA 0153 TCA 0154
(p 123) (p 123) (p 121) (p 121) (p 122)
25

60
25

42

38
38
20
15

13

15 6 20 6 20 34 20 20

TCA 0155 TCA 0157 TCA 0169 TCA 0173 TCA 0187 TCA 0188
(p 122) (p 122) (p 128) (p 128) (p 125) (p 125)

50
38
38
38

38
38

15 15 6 25 30 39 40 40

TCA 0190 TCA 0204 TCA 0207 TCA 0209 TCA 0210 TCA 0215
(p 126) (p 128) (p 128) (p 129) (p 129) (p 129)

SAS International www.sasintgroup.com

 trims and perimeters silhouettes
34
100

76
100
60

38
38

30
40 100 20 50

TCA 0219 TCA 0310 TCA 0312 TCA 0313

(p 129) (p 129) (p 130) (p 129)

100
100
30

40 20 20 15 6 15 15 6

TCA 0314 TCA 0317 TCA 1124 TCA 1127

(p 129) (p 130) (p 127) (p 127)

38 56.4 38
60

60
38

38

30
20

15

56.4 20 38 20 15 6 15 15 6 25 15

TCA 1130 TCA 1131 TCA 1132 TCA 1133 TCA 1136
(p 128) (p 128) (p 127) (p 126) (p 128)

98
100
100

21 12.5
12.5
30

21
2
R5

25 40 19

TCA 1147 TCA 1182 TRU-B-1000 TRU-CS-125

(p 130) (p 129) (p 131) (p 131)

SAS International www.sasintgroup.com

 20 8.5 8.5 8.5
12.5
trims and perimeters silhouettes

12.5

15 15 17 17 25
12.5

21

21
21

21
21
19

12.5 12.5 15 15

TRU-CS-125-125-125 TRU-ET-125 TRU-ET-125F TRU-ET-150 TRU-ET-150F TRU-ET-250

(p 131) (p 131) (p 131) (p 132) (p 132) (p 132)

0
R6
21

10

38
31

30
18

21

20
27 83 20 15 21 20 25

TRU-HO-1516 TRU-HR-125 TRU-IC-600 TRU-LK-330 TRU-MJ-150

(p 125) (p 132) (p 132) (p 124) (p 123)

95

5
R7
80
0
R6
5
R2

19 10

45
29

20

20
19

TRU-OC-90 TRU-OC-250 TRU-OC-600 TRU-OC-750

(p 133) (p 133) (p 133) (p 133)
53

21
21 21 21
30

15
11

11
10

11

15 21 25 12.5 15 25 25

TRU-PB-330 TRU-PT-250 TRU-RT-125 TRU-RT-150 TRU-RT-250 TRU-RT-250D

(p 124) (p 122) (p 133) (p 133) (p 133) (p 133)
42.75

38

38

15 31 20 15 20 20 15 21 20 15 21 15 15 25

TRU-SG-150 TRU-SH-150 TRU-SJ-150 FAB-SJ-150 TRU-SJ-1516

(p 124) (p 123) (p 123) (p 123) (p 126)

SAS International www.sasintgroup.com

 trims and perimeters silhouettes
30

16
8

8
25.8 15 25 25 15 21 15 25 15 25 24 15

TRU-SJ-2616 TRU-SJ-330 TRU-SJ-T1508 TRU-SJ-T1516 TRU-SJ-T2408

(p 126) (p 124) (p 125) (p 125) (p 125)
12
20
100
20

25
25
42.75
25
16

15
15

24 15 31 15 21
15 21

TRU-SJ-T2416 TRU-SK-25 TRU-SK-100 TRU-SS-150 TRU-ST-150 FAB-ST-150

(p 125) (p 134) (p 134) (p 124) (p 122) (p 122)

30

15 15 21 15 15 21 16.8 25 25.8 25
16.75 25 25 21

TRU-SW-1508 TRU-SW-1516 TRU-TJ-1508 TRU-TJ-1516 TRU-TJ-2616 TRU-TJ-330

(p 127) (p 127) (p 125) (p 126) (p 126) (p 124)
Variable (15–125mm)

20
20

25
12.5
42.75

20

20

16.8 25 16.8 25 15 16 20

FAB-TJ-P1508 TRU-TJ-P1516 TRU-US-150 TRU-VD-1250 TRU-WR-125 TRU-WR-250

(p 126) (p 126) (p 128) (p 134) (p 134) (p 134)
19
19
20

20

25

TRU-Z-125 TRU-Z-250
(p 134) (p 134)

SAS International www.sasintgroup.com