16/24-Port Gigabit Switch
MODELS: TL-SG1016D/ TL-SG1024D Datasheet
Highlights
-10/100/1000 Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/MDIX
-Supports 802.1p/DSCP QoS functions
-Durable metal casing and a fanless design
-IEEE 802.3x flow control provides reliable data transfer
-Green Ethernet technology reduces power consumption
-Isolation Mode easily divides traffic for specific ports with one click to avoid snooping,
tampering, and isolate broadcast storm for higher security.
-Monitor and address loop-related issues within your network structure to prevent disruptions
caused by looping
-Plug and play, no configuration needed
Overview
The TL-SG1016D/TL-SG1024D Gigabit Ethernet Switch represents a high-performance,
low-cost, simple, seamless, and standardized upgrade that allows you to transform your
existing network and achieve 1000Mbps speeds. All 16/24 ports support auto MDI/MDIX, so
there is no need to worry about cable types. Simply plug and play.
TP-Link Green Technology
The new TL-SG1016D/TL-SG1024D Gigabit Switch features a variety of energy-efficient
technologies that allow you to increase your network capacity while consuming less power.
The switch limits the carbon footprint of your network by automatically adjusting power con-
sumption in accordance with link status and cable length. It complies with the EU RoHS, which
prohibits the use of certain hazardous materials, and most of the packaging material is recy-
clable.
Enhanced Performance
All 16/24 ports are Gigabit RJ-45 ports, allowing them to support large file transfers and
makes them compatible with 10Mbps and 100Mbps Ethernet devices. Since both switches
feature a non-blocking switching architecture, the TL-SG1016D and TL-SG1024D forward
and filter packets at full wire-speed, achieving maximum throughput. 10KB Jumbo frame
significantly improves performance during large file transfers. IEEE 802.3x flow control
supports Full Duplex mode and backpressure for Half Duplex mode alleviates traffic
congestion to make the TL-SG1016D/TL-SG1024D more reliable. This makes the
TL-SG1016D/TL-SG1024D a perfect choice for upgrading your network to Gigabit speed
while protecting your previous investment.
Easy of Use
The automated features of this gigabit switch make installation hassle-free. No configuration is
required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each
port senses the link speed of network devices (10,100, or 1000 Mbps) and intelligently adjusts
for compatibility and optimal performance.
Specifications
Features & Performance
Product Picture
Model TL-SG1016D TL-SG1024D
Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1p
16 10/100/1000Mbps RJ45 Ports, 24 10/100/1000Mbps RJ45 Ports,
Interface
Auto Negotiation/Auto MDI/MDIX Auto Negotiation/Auto MDI/MDIX
Forwarding Mode Store-and-Forward
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
Network Media
Hardware 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m)
Features
Power Supply 100-240VAC, 50/60Hz
Green Technology Yes
LED Power, 1000Mbps, Link/Act
Dimensions 11.6*7.1*1.7 in. (294*180*44 mm)
Fanless Yes
Switching Capacity 32Gbps 48Gbps
Packet Forwarding Rate 23.8Mpps 35.7Mpps
MAC Address Table 8K
Jumbo Frame 10KB
Performance 802.1p/DSCP QoS: Yes
Advanced Functions Isolation Mode: Ports 1-14 Isolation Mode: Ports 1-22
Loop Prevention: Ports 1-16 Loop Prevention: Ports 1-24
Max Power Consumption 10.68 W (220V/50Hz) 13.54 W (220V/50Hz)
Max Heat Dissipation 36.31 BTU/h 46.04 BTU/h
CE, FCC, RoHS
Operating Temperature 0°C~40°C (32°F~104°F)
Storage Temperature -40°C~70°C (-40°F~158°F)
Environment
Operating Humidity 10%~90%RH non-condensing
Storage Humidity 5%~90%RH non-condensing
Ordering Information 16-Port Gigabit Switch 24-Port Gigabit Switch
www.tp-link.com
Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders. © 2023 TP-Link
