Seiko MS621FE FL11E Datasheet
Seiko MS621FE FL11E Datasheet
MS412FE/MS518SE/MS614E/MS614SE/MS621FE/MS920SE
FEATURES
• Large discharge capacity :
For high operational voltage range of 3.3V to 2.0V.
• Long cycle life :
Cycle life of over 100 cycles under charge/discharge
conditions of 3.3V to 2.0V (D.O.D.100%).
• Excellent overdischarge characteristics :
Continued stable capacity characteristics even after the
battery is overdischarged down to 0.0V.
• Operation over a wide temperature range:
Operating temperature range : −20°C to +60°C
Consult us for using the battery at a temperature beyond
the above temperature range.
MS (Manganese Silicon) lithium rechargeable batteries,
• RoHS Compliant
developed by Seiko Instruments Inc., use silicon oxide
as the anode and a lithium manganese composite oxide
as the cathode. As a result, they offer long cycle life and APPLICATIONS
highly stable overdischarge characteristics.
• Backup power supply for memory or clock function
in various types of electronic equipment for mobile
Negative communication, office automation, audio-visual equipment,
Gasket
cap
mobile information equipment, etc. (cellphone, PHS,
Negative cordless phone, pager, memory card, fax machine, PC,
electrode
video camera, digital camera, tuner, handy terminal, PDA,
Separater etc.)
• Hybrid power supply in combination with solar cells.
Positive • Main power supply for small and slim portable equipment.
electrode
Positive
<Cross Section> case
SPECIFICATIONS
*1. Nominal capacity: Typical value of discharge capacity between 3.1V and 2.0V
(Note that the discharge capacity of MS614E is between 3.3V and 2.0V.)
*2. Internal impedance is measured using an AC (Alternating Current) method at the fully charged state.
*3. Maximum discharge current indicates the value of a current for approximately 50% of the nominal capacity.
*4. Cycle Life indicates the times charge/discharge is repeated for approximately 50% of the capacity values in the specification sheet.
*5. 100% and 20% are based on nominal capacity.
*6. A constant voltage charge is recommended, but due to a limit in charge current, it is necessary to insert a resistor to regulate the
charge current.
Contact us for further details.
If a constant current charge is required, contact us for more information.
3.0 3.0
Voltage [V]
Voltage [V]
2.5 2.5
3.3V
3.1V
2.0 2.8V 2.0
3.0V 2.8V 2.9V 3.0V
2.9V 3.1V
3.3V
1.5 1.5
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Capacity [mAh] Capacity [mAh]
MS614E MS614SE
3.5 3.5
Charge: max. 0.3mA/72 hours (CC/CV) Charge: max. 0.1mA/96 hours (CC/CV)
Discharge: 15μA/c.o.v. = 2.0V (CC) Discharge: 15μA/c.o.v. = 2.0V (CC)
3.0 3.0
Voltage [V]
MS621FE MS920SE
3.5 3.5
Charge: max. 0.1mA/96 hours (CC/CV) Charge: max. 0.2mA/96 hours (CC/CV)
Discharge: 15μA/c.o.v. = 2.0V (CC) Discharge: 50μA/c.o.v. = 2.0V (CC)
3.0 3.0
Voltage [V]
Voltage [V]
2.9V
2.0 2.0
2.8V 3.0V 2.8V 2.9V 3.0V
1.5 1.5
0.0 2.0 4.0 6.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0
Capacity [mAh] Capacity [mAh]
CHARACTERISTICS (MS614SE)
Charge/discharge characteristics Discharge Characteristics at Various Discharge Current
3.5 3.5
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15μA/c.o.v. = 1.5V (CC)
3.0
3.0
Voltage [V]
Voltage [V]
2.5
10μA
2.5
5μA
2.0
2.0 100μA
1.5 300μA 50μA 15μA
Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15μA/c.o.v. = 1.5V (CC)
1.0 1.5
0.0 1.0 2.0 3.0 4.0 0.0 1.0 2.0 3.0 4.0
Capacity [mAh] Capacity [mAh]
CHARACTERISTICS (MS614SE)
2.5
2.5 30 days
2.0
60°C
180 days –20°C 0°C
2.0 25°C
90 days Initial 1.5
40°C
1.5 1.0
0.0 1.0 2.0 3.0 4.0 0.0 1.0 2.0 3.0 4.0
Capacity [mAh] Discharge capacity (mAh)
High Temperature (60°C) Storage Characteristics Floating Characteristics (60°C, applied voltage 3.1V)
3.5 3.5
Storage condition: respective period at 60°C Storage conditions: Each period at 60°C, applied voltage 3.1V
[Capacity measurement conditions] [Capacity measurement conditions]
3.0 Charge: max. 0.1mA/3.1V, 96 hours (CC/CV) 3.0 Charge: max. 0.1mA/3.1V, 96 hours (CC/CV)
Discharge: 15μA/c.o.v. = 2.0V (CC) Discharge: 15μA/c.o.v. = 2.0V (CC)
Voltage (V)
Voltage (V)
Recommend Recommend
MS412FE FL26E MS518SE FL35E MS412FE IL21E
(9.2)
0.5 ±0.1
0.5 ±0.1
1±0.3
0.5±0.1
0.5 ±0.1
1±0.3
1±0.3
1±0.3
2 ±0.3
2 ±0.3
0.5 ±0.1
0.5±0.1
2.2 ±0.5
1.6max.
1.75 ±0.1
0.1±0.02
2.1max.
2.2±0.5
2.2 ±0.3
φ 4.8max.
φ 4.8max.
φ 5.8max.
- Contact Seiko Instruments Inc. for batteries with terminals other than the above shapes.
- Units: mm
- The hatched parts are tin plated (Sn: 100%).
0.5 ±0.1
0.5 ±0.1
0.5 ±0.1
1±0.3
1±0.3
1±0.3
2 ±0.3
2 ±0.3
2 ±0.3
0.5 ±0.1
0.5 ±0.1
0.5±0.1
0.1±0.02
1.8max.
0.1±0.02
1.8max.
2.5 +0.3 2.2 ±0.1
0.15 ±0.02
2.7max.
-0.5 2.5 +0.3
-0.5
2.5 ±0.3
1.5 ±0.5
(Sn plated portion) 1.8 ±0.5
φ 6.8max.
φ 6.8 max.
φ 6.8max.
1.8±0.5 1.8 ±0.5
(Sn plated portion) (Sn plated portion) 1.7 ±0.5
(Sn plated portion)
Recommend
MS920SE FL27E
0
12.8 -1.0
1.25 ±0.3
0.5±0.1
2.5 ±0.3
0.5±0.1
2.2 ±0.1
2.7max.
0.15±0.02
( 3.3)
1.8 ±0.5
(Sn plated portion)
φ 9.5max.
1.7±0.5
(Sn plated portion)
0.5 ±0.1
0.5 ±0.1
0.5±0.1
1±0.3
1±0.3
0.5 ±0.1
0.5 ±0.1
1±0.3
1±0.3
1±0.3
1±0.3
0
2.5 -0.6 2.5 ±0.4 2.5 ±0.4
2.1±0.1 2.2±0.1
1.8max.
0.1±0.02
2.7max.
0.15±0.02
2.2±0.1
2.5±0.4
2.7 max.
2.5 +0.3
0.15 ±0.02
-0.5
2.5±0.4
φ 6.8max.
φ 9.5 max.
φ 6.8 max.