Scribd
Upload
61 views1 page

Industrial Sewage Pump Specs

The document outlines specifications for four lift stations, including the Duque, Eusebio, Centennial, and Sta Monica stations, detailing their sewage submersible pumps and motors. Each station has specific capacities, power ratings, and design features such as discharge bore sizes and insulation classes. Additionally, the Sta Monica lift station includes temperature sensors for monitoring motor and bearing temperatures.

Uploaded by

smokestorm_822380
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views1 page

Industrial Sewage Pump Specs

The document outlines specifications for four lift stations, including the Duque, Eusebio, Centennial, and Sta Monica stations, detailing their sewage submersible pumps and motors. Each station has specific capacities, power ratings, and design features such as discharge bore sizes and insulation classes. Additionally, the Sta Monica lift station includes temperature sensors for monitoring motor and bearing temperatures.

Uploaded by

smokestorm_822380
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

DUQUE LIFT STATION

Sewage Submersible Pumps and motor, inclusive of quick disconnet to duck-foot


mountaing frame and bolts , SS316 appurtenances dual guide rails, lifting chain + hook
Capacity : 1.1MLD at 25m TDH, 80mm discharge bore (3" discharge) assy 2.00
Rating: 11kW (tentative), 460V, 3PH, 60Hz, IP68, Service Factor 1.15, Insulation Class F,
1800rpm (maximum), 12 start / stops per hour capable.
EUSEBIO LIFT STATION
Sewage Submersible Pump and Motor, inclusive of quick disconnet to duck-foot
mountaing frame and bolts. Pump Capacity:
Flowrate: 3 MLD
Total Dynamic Head: 5 m
Discharge Bore: 100 mm(reference selection) Motor: assy 2.00
Power Rating: 3.7 kW (reference selection) Voltage: 460 volts
Speed: 1800 rpm Phase: 3 Ph
Design : 60Hz, IP68, Insulation Class F (or higher), Service Factor 1.15 (or higher)
Motor should be VFD ready
CENTENNIAL LIFT STATION
Sewage Submersible Pump Capacity : 3.7MLD at 42m TDH
Motor Rating: ≤45kW, 460V, 3PH, 60Hz, IP68, SF=1.15, Insulation Class F, 1800rpm (max) assy 2.00
Start/stop per hour: 12 Discharge bore: 150mmø
STA MONICA LIFT STATION
Sewage Submersible Pump and Motor, inclusive of quick disconnet to duck-foot
mountaing frame and bolts. Pump Capacity:
Flowrate: 7 MLD
Total Dynamic Head: 14 m
Discharge Bore: 150 mm(reference selection) Motor:
Power Rating: 22 kW (reference selection) Voltage: 460 volts
assy 2.00
Speed: 1800 rpm Phase: 3 Ph
Design : 60Hz, IP68, Insulation Class F (or higher), Service Factor 1.15 (or higher)
Motor should be VFD ready
Shall be installed with PT100 RTD temperature sensors at stator winding (Phase 1 , Phase
2 Phase 3) and bearing temperature sensors for main and support bearing.

You might also like