COLUMN EDGE FOOTING DESIGN

F-1
Input Parameters:
Concrete Strenght, fc' = 20.7 Mpa Longitudinal Bar, Ax = 7
Rebar yield strength, fy = 275 Mpa Traverse Bar, Ay = 7
Net allowable Soil Pressure, qa = 150 kPa Left edge, dx = -0.45
Footing Embedment Depth, Df = 1.5 m Exceed edge limit 0
Surcharge, qs = 3.5 kPa Depth, Cx = 0.3
Soil Weight, ws = 15.7 kN/m³ Width, Cy = 0.45
Footing Thickness, t= 0.4 m Load, Pd = 155.76
Length, L= 1.2 m Load, Pl = 14.576
Width, B= 1.2 m Moment X, Mx= 90
Clear Covering, c= 75 mm Moment y, My= -5.5

Check Soil Bearing Capacity

Applied Load, Pd + Pl = 170.34

Surcharge, qs (LB) = 5.04
Weigth Footing, (23.5-ws) tBL= 4.49
Pn = 179.87 kN
Mx = 9.05904 KNm My = 5.5 KNm
ex = 0.050 < L/6 = 0.2 m
ey = 0.032 < B/6 = 0.200 m
P 6M > 150.00
qnx(max) = + = 156.36
BL L²B Fail!
P 6M < 150.00
qny(max) = + = 144.01
BL B²L Pass!

Check Thickness ; Two-way Shear

Applied Load, 1.2Pd + 1.6Pl = 210.23

Surcharge, 1.2 qs (LB) = 6.05
Weigth Footing, 1.2(23.5-ws) tLB = 5.39
Pu = 221.67
Mx = -9.75283 My = 5.5
ex = -0.04 m < L/6 = 0.2
ey = 0.02 m < B/6 = 0.2
qumaxx = 187.8036 qumaxy = 173.0368 Kpa
d = 0.309 m
Vux = Pu - qux (Cx+d/2)(Cy+d) = 159.81 KN
Vuy = Pu - quy (Cx+d/2)(Cy+d) = 168.57 KN Check Flexural Reinforcement; Asmin = 0.002Bt
bo = 2(D1 + d) 2(W1 + d) = 1.67 m Mux = Bx²/6 (qux + 2qumin) Muy = By²/6 (quy + 2qum
Ø Vc1 = Ø 0.33 √fc' bo d = 580.38 KN Mux = 66.59 KNm, Muy = 14.26
bc = Long/short side of column 1.5 ,αs = Error bo Asx = 1407.43 mm², Asy = 1407.43
Ø Vc2 = Ø[1+(2/βc)].17 √f'c bo d = 697.63 KN Asmx = 960.00 mm², Asmy = 960.00
Ø Vc3 = Ø[2+(αs d/βc)].083 √f'c bo d = #VALUE! KN Sx = 156.3333 mm, Sy = 156.3
Ø Vc = min, Ø (Vc1, Vc2, Vc3) = #VALUE! KN ax = Asx fy / 0.85 fc' B = 18.33
Must, ØVc > Vu, #VALUE! ### 168.57 ### ay = Asy fy / 0.85 fc' L = 18.33
Check One-way Shear; Check Tension Contolled Limit Ø=
Vux = .5 (qux+qumin)x d B = 96.99 KN ax/d = 0.059 ay/d = 0.059
Vuy = .5 (quy+qumin)y d L = 13.62 KN ab/d = 0.583 > ax/d & ay/d,
ØVcx = Ø 0.17 √fc' B d = 215.10 KN Pass! ØMnx = ØAsx fy(d-ax/2) = 104.44
ØVcy = Ø 0.17 √fc' L d = 215.10 KN Pass! ØMny = ØAsy fy(d-ay/2) = 104.44

Therefore use, 1.2x1.2x0.4m thick Footing with 16mmØ Tension Bar Grade (40) sp. @ 156.333333333333mm and 156
along BL respectively O.C.
 2. If
design is
satisfied,
1. Fill up on Blue Color Only
Click the
3. Copy
Title and
and
dragPaste
as
downPicture
a
to Word
little.
16 mmØ Documen
4. Save as
tPDF file.
-0.45 m, 0 from center 0.375
0 m, 0 from center 0
0.3 m Input forces here
0.45 m P1 My MZ
155.76 KN 111 17 -13
14.576 KN
90 KNm Check Soil Bearing Capacity 0 1.2 0
-5.5 KNm 156.36 > 150.00 -187.80 -120.08 -134.84
144.01 < 150.00
Check Thickness ; Two-way Shear
#REF! 159.81
#REF! SOIL PRESSURE
159.81 ALONG X @ FACTORED LOADS
Check One-way Shear
50
215.0974
Check Flexural Reinforcement
0
- 0 #REF! 14.26428 1.2
0 -50 - 0

Check Tension Contolled Limit

-100 ØMny = 0.000
#REF! 0 0.000
-150
156.36 144.0061
-200 93.45389 105.8117
120.0756 173.0368
187.8036 134.8423 Row 16 Row 17
Max 187.80 173.04 X - Twoway
Min 120.08 SOIL 134.84
PRESSURE ALONG YPositive@ FACTORED
Negative LOADS
Tip 50 67.73 38.19 X 0.15 1.05
-17.44 2.100694 8.466 59.262
102.64 136.94 quX 128.54 179.34 qu
0
Vu =0 -41.2906 10.7627 b1, b2 0.4545 0.759 Vu 1.2
8.466 19.09722 Area Punch 0.344966 Vumax
-50
128.54 153.94 Fu 44.34 61.87
97.56304 139.9311 Vux 177.33 159.81
-100
214.4073 106.2077
nt; Asmin = 0.002Bt 1way
-150
Muy = By²/6 (quy + 2qumin) Vu = 7.27 115.47 0.61 0.59
14.26 KNm X 0.90 0.30
-200
1407.43 mm² 156.3333 51.05 16.68 quY
Row 16 Row 17
960.00 mm² quX 171.13 136.75 Area Punch
mm (Smax=450mm) 320895 Vux 121.36 96.99 Fu
mm 21.114 Vux
mm 15198.20214 Moment X
0.9 15.1982 Pos Neg
0.059 0.3 0.9
16.93 50.80
> 66.59 Pass! qu 137.01 170.87
> 14.26 Pass! 107637 107637 Mu 83.04 66.585672
3192.737 3192.737
333333333333mm and 156mm 104444 104444 Moment Y
104.4443 104.4443 Pos
3 0.38
Y 0.375 0.83
3 x m 11.93576 26.2586806
Therefore use,
1.2x1.2x0.4m quy 146.78 161.10
Mu 11.71302 14.2642848
Mu 14.26428
 0.6 0.6
-0.3 0.225
0.9 0.375
1.2 0.4 0.4
-173.04

#REF!
LOADS #REF! Vu = qu - (WL-(D1+d)(W

1.2 0
0

0
#REF!

Y - 1way
Positive Negative f'c = 20.7
LOADS 0.07 0.07
0.066 1.13 0.07 1.13 -0.309 0.066
2.100694 36.09375 2.100694 36.09375
136.94 170.94 136.94 170.94
10.7627
1.2 13.62133 10.7627 13.62133 0.909 0.759 1.668
13.62133 13.62133 0.15 0.6
581.8182 3.075 1.5375

X - Twoway 2.3639063 2.3639063

Positive Negative
0.60 0.60 1375.3637
19.10 19.10 Mu = 0 0.375
153.94 153.94 156.0 0 0.125
0.34 0 0.25
53.10 53.10 450 0 11.935764
168.57 168.57 0.001375 120.08 146.78
211.8857 0 11.71
180.1029
0.9 0.059

1206
Moment Y 804
Neg 160.8
0.38
0.38 0.83
11.93576 26.25868 thick Footing with Tension Baralong BL re L
 146.78 161.10 16mmØ Tension Bar Grade (40) sp. @ 156.333333333333mm and 156mm
11.71302 14.26428 mm and Grade ( ) sp. @
14.26428 Grade (40) sp. @
40

230 33
275 40
415 60
 Mux = 960.00
Muy = 14.26
B= 1.2
L= 1.2
fy
d= 0.309
Column1
###
###
###
qu - (WL-(D1+d)(W1+d))

1.44
0.609
0.759
0.977769 183.62849

0.75
2.3333333
0.3986471
0.1946336

#VALUE!

4.5497253 0.5862457

,
Ø Vc1
Ø Vc2
Ø Vc3

112.68213
0.140625

103.82207
0.2025
###
Asx = 1407.4335
Asy = 1407.4335
33mm and 156mm