SUBMITTAL

Sikafloor® -264 SG
TABLE OF CONTENTS
1. COMPANY PROFILE

2. TECHNICAL DATA SHEETS

3. METHOD STATEMENT

4. DCL CERTIFICATE

5. COLOUR CHART/BROCHURE

6. TEST REPORTS

7. APPROVALS

8. PROJECT REFERENCES

9. LICENSES & CERTIFICATES

COMPANY
PROFILE
WE ARE SIKA
Company Profile
Sika is a specialty chemicals company established in 1910
in Switzerland, with a leading position in the development
and production of systems and products for bonding, sealing,
damping, reinforcing and protecting in the building sector
and motor vehicle industry.

OUR STRATEGY
The Sika growth model is synonymous with long-term
success, as well as sustainable and profitable growth. By
targeting the strategic pillars of market penetration, innova-
tion, operational efficiency, acquisitions, sustainability - and
driven by its strong corporate values - Sika is growing
successfully.

WHAT WE DO
BUILDING TRUST TARGET MARKETS
Trust is the foundation of our partnerships and collaborations. Sika provides one of the most comprehensive sets of
For us it is demonstrated in the quality of our work, and is the solutions dedicated to:
result of our innovative power and perseverance. However, it is
not a static state, but a continuous process that needs to be
actively cultivated. The Sika brand exists because every day we
continuously invest in building trust.

MORE THAN 100 YEARS OF EXPERTISE BUILDING FINISHING CONCRETE

Sika's reputation for quality and reliability is virtually unmat-
ched, and is illustrated through a comprehensive portfolio of
problem solving products that have been employed for many
years in a diverse range of applications. Whether we are water-
proofing your basement or your roof, sealing your skyscraper or
your car, or working with you on your house or your multi-sto-
rey building, you will see why we are renowned for Building WATERPROOFING ROOFING
Trust.

SIKA AT A GLANCE
FLOORING SEALING & BONDING
25,000 + TEAM MEMBERS
100 COUNTRIES
300 + FACTORIES WORLDWIDE
8.1 Billion CHF NET SALES
REFURBISHMENT INDUSTRY

Sika UAE LLC

P.O. Box 126212
Dubai, UAE
T: +971 4 439 8200
F: +971 4 439 3606
[email protected]
TECHNICAL
DATA SHEET
PRODUCT DATA SHEET
Sikafloor®-264 SG
2-part High-build Solvent Free Epoxy Coating

DESCRIPTION CHARACTERISTICS / ADVANTAGES

Sikafloor®-264 SG is a two-part, high-build, solvent ▪ Good chemical and mechanical resistance
free, coloured epoxy resin. ▪ Easy application
Suitable for use in hot and tropical climatic conditions. ▪ Economical
▪ Liquid proof
USES ▪ Gloss finish
▪ High Slip resistant surface when broadcasted
Sikafloor®-264 SG may only be used by experienced
professionals. SUSTAINABILITY
Sikafloor®-264 SG can be used as a: ▪ Sikafloor®-264 SG is certified according "Low Emit-
▪ Roller coat for concrete and cement screeds with ting Materials as per Al Sa'fat - Dubai Green Building
normal up to medium heavy wear for example stor- Evaluation System" by Dubai Central Laboratory
age and assembly halls, maintenance workshops, (DCL), certificate No. CL17020432
garages and loading ramps. ▪ LEED Raiting: Sikafloor®-264 SG conforms to the re-
▪ A broadcast system for multi-storey and under- quirements of LEED EQ Credit 4.2: Low-Emitting Ma-
ground car parks, maintenance hangars and for wet terials: Paints and Coatings with VOC Content <100
process areas, for example beverage and food in- g/l
dustry. ▪ California Department of Public Health (CDPH) Meth-
od - VOC emission test: PASS

APPROVALS / CERTIFICATES
▪ Certified by Dubai Civil Defence (DCD)

Product Data Sheet

Sikafloor®-264 SG
April 2022, Version 04.01
020811020020000065

1/6
PRODUCT INFORMATION
Composition Pigmented epoxy resin
Packaging Please refer to local country price list for available packaging sizes:
Part A (container) 4.12 kg 19.80 kg 23.10 kg
Part B (container) 0.88 kg 4.20 kg 4.90 kg
Part A + B (set) 5.00 kg 24.00 kg 28.00 kg

Shelf life 12 months from date of production.

Storage conditions Store in a dry area in original sealed packaging at temperatures between
+5 °C and +30 °C. Protect from direct sunlight, heat and moisture.
Appearance and colour Resin - Part A Coloured, liquid
Hardener - Part B Transparent, liquid
Available in various colour shades, please request Sika sales representative for col-
our chart.
Under direct sun light there might be some discolouration and colour variation
which have no influence on the function and performance of the coating.
Density Part A (at 23 °C) ~1.73 kg/l (DIN EN ISO 2811-1)
Part B (at 23 °C) ~1.00 kg/l
Mixed resin (at 23 °C) ~1.55 kg/l

Solid content by mass ~100 %

Note: Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association
for construction chemicals)

Solid content by volume ~100 %

Note: Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association
for construction chemicals)

TECHNICAL INFORMATION
Shore D Hardness ~80 (7 d / +23 °C) (ASTM D2240-15)

Abrasion resistance <50 mg (CS 17/1000/1000) (28 d / +23 °C) (ASTM D4060-14)
(Taber Abraser Test)

Resistance to impact ~1.5 kg-m (ASTM D2794-93)

Compressive strength ≥ 75 N/mm2 (28 d / +23 °C) (ASTM C579-18)

Tensile strength ~18 N/mm2 (28 d / +23 °C) (ASTM C307-18)

Tensile adhesion strength > 1.5 N/mm2 (failure in concrete) (BS 1881 Part 207)

Temperature resistance Exposure Dry heat

Permanent +50 °C
Short-term max. 7d +80 °C
Short-term max. 12 h +100 °C
Short-term moist / wet heat* up to +80 °C where exposure is only occasional
(steam cleaning etc.)
*No simultaneous chemical and mechanical exposure.
Water absorption ~0.05% (ASTM C413-01)

Chemical resistance Resistant to many chemicals. Please contact Sika's Technical Department
for chemical resistance table.

Product Data Sheet

Sikafloor®-264 SG
April 2022, Version 04.01
020811020020000065

2/6
SYSTEM INFORMATION
Systems Roller coating:
Primer*: 1 - 2 x Sikafloor®-161 (optional)
Coating: 2 x Sikafloor®-264 SG

Textured roller coating:

Primer*: 1 - 2 x Sikafloor®-161 (optional)
Coating: 1 - 2 x Sikafloor®-264 SG + Extender T

Textured roller coating with improved slip resistance:

Primer*: 1 - 2 x Sikafloor®-161 (optional)
Coating: 1 x Sikafloor®-264 SG + Extender T + Sikadur®-504

Broadcast system:
Primer*: 1 - 2 x Sikafloor®-161 (optional)
Base coat: 1 x Sikafloor®-264 SG
Broadcasting: Sikadur®-507 / Sikadur®-509
Sealer coat: 1 x Sikafloor®-264 SG

*Note: In cases of limited exposure and good sound low absorbent con-
crete substrates, priming with Sikafloor®-161 is not mandatory. It is recom-
mended to check the absorbency in case pinholes will occur.
Consumption Coating System Product Consumption
Primer 1 - 2 x Sikafloor® -161 0.25 - 0.40 kg/m2 per
coat
Levelling (optional) Sikafloor® PS or, Refer to relevant PDS
Sikafloor®-161 levelling
mortar
Roller coating 2 x Sikafloor®-264 SG 0.25 - 0.35 kg/m2 per
coat
Textured roller coating 1 - 2 x Sikafloor®-264 SG 0.5 - 0.8 kg/m2 per coat
+ Extender T 2-3%
Textured roller coating 10 pbw Sikafloor®-264 0.5 - 0.8 kg/m2
with improved slip res- SG + Extender T + 1 pbw 2 - 3 %
istance Sikadur®-504 0.05 - 0.07 kg/m2
Broadcast system Sikafloor®-264 SG + 0.25 - 0.30 kg/m2
broadcasting Sikadur®- 0.50 - 2.00 kg/m2
507 / Sikadur®-509 + 0.35 - 0.40 kg/m2
Sealcoat Sikafloor®-264
SG
These figures are theoretical and do not allow for any additional material
due to surface porosity, surface profile, variations in level and wastage etc.
Ambient air temperature +10 °C min. / +35 °C max.
Relative air humidity 80 % r.h. max.
Dew point Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point to
reduce the risk of condensation or blooming on the floor finish.
Note: Low temperatures and high humidity conditions increase the prob-
ability of blooming.
Substrate temperature +10 °C min. / +35 °C max.
Substrate moisture content < 4 % pbw moisture content.
Test method: Sika®-Tramex meter, CM - measurement or Oven-dry-meth-
od.
No rising moisture according to ASTM (Polyethylene-sheet).

Product Data Sheet

Sikafloor®-264 SG
April 2022, Version 04.01
020811020020000065

3/6
Pot Life Temperature Time
+10 °C ~60 min
+20 °C ~30 min
+30 °C ~15 min

Curing time Before applying Sikafloor®-264 SG on Sikafloor®-161 allow:

Substrate temperature Minimum Maximum
+10 °C 24 h 3d
+20 °C 12 h 2d
+30 °C 8h 1d
Before applying Sikafloor®-264 SG on Sikafloor®-264 SG allow:
Substrate temperature Minimum Maximum
+10 °C 30 h 3d
+20 °C 24 h 2d
+30 °C 16 h 1d
Times are approximate and will be affected by changes in ambient condi-
tions, particularly temperature and relative humidity.
Applied product ready for use Temperature Foot Traffic Light Traffic Full cure
+10 °C ~72 h ~6 d ~10 d
+20 °C ~24 h ~4 d ~7 d
+30 °C ~18 h ~2 d ~5 d
Note: Curing times are approximate and will be affected by changing ambi-
ent conditions

BASIS OF PRODUCT DATA IMPORTANT CONSIDERATIONS

All technical data stated in this Data Sheet are based ▪ Do not apply Sikafloor®-264 SG on substrates with
on laboratory tests. Actual measured data may vary rising moisture.
due to circumstances beyond our control. ▪ Freshly applied Sikafloor®-264 SG must be protected
from damp, condensation and water for at least 24
FURTHER INFORMATION hours.
▪ For areas with limited exposure and normally ab-
▪ General Method Statement sorbent concrete substrates priming with Sikafloor®-
Please refer to Sikafloor®-264 SG - General MS 161 is not necessary for roller or textured coating
▪ Substrate quality & Preparation systems.
Please refer to Sika Method Statement: “EVALUATION ▪ For roller / textured coatings: Uneven substrates as
AND PREPARATION OF SURFACES FOR FLOORING SYS- well as inclusions of dirt cannot and should not be
TEMS”. covered by thin sealer coats. Therefore both sub-
▪ Application instructions strate and adjacent areas must always be prepared
Please refer to Sika Method Statement: “MIXING & and cleaned thoroughly prior to application.
▪ The incorrect assessment and treatment of cracks
APPLICATION OF FLOORING SYSTEMS”.
may lead to a reduced service life and reflective
▪ Maintenance
cracking.
Please refer to “Sikafloor®- CLEANING REGIME”. ▪ For exact colour matching, ensure the Sikafloor®-264
SG in each area is applied from the same control
batch numbers.
▪ Under certain conditions, underfloor heating com-
bined with high point loading, may lead to imprints
in the resin.
▪ If heating is required do not use gas, oil, paraffin or
other fossil fuel heaters, these produce large quantit-
ies of both CO2 and H2O water vapour, which may
adversely affect the finish. For heating use only elec-
tric powered warm air blower systems.

Product Data Sheet

Sikafloor®-264 SG
April 2022, Version 04.01
020811020020000065

4/6
ECOLOGY, HEALTH AND SAFETY APPLICATION
Prior to application, confirm substrate moisture con-
User must read the most recent corresponding Safety tent, relative air humidity and dew point. If > 4 % pbw
Data Sheets (SDS) before using any products. The SDS moisture content, Sikafloor® EpoCem® may be applied
provides information and advice on the safe handling, as a T.M.B. (temporary moisture barrier) system.
storage and disposal of chemical products and con- Primer:
tains physical, ecological, toxicological and other Make sure that a continuous, pore free coat covers
safety-related data. the substrate. If necessary, apply two priming coats.
Apply Sikafloor®-151, Sikafloor®-161 and Sikafloor®-
APPLICATION INSTRUCTIONS 161 G by brush, roller or squeegee. Preferred applica-
tion is by using a squeegee and then backrolling cross-
SUBSTRATE QUALITY / PRE-TREATMENT wise.
▪ The concrete substrate must be sound and of suffi-
cient compressive strength (minimum 25 N/mm2) Levelling:
with a minimum pull off strength of 1.5 N/mm2. Rough or unlevelled surfaces need to be levelled first.
▪ The substrate must be clean, dry and free of all con- Use Sikafloor®-161 levelling mortar or Sikafloor® PS
taminants such as dirt, oil, grease, coatings and sur- (see Product Data Sheet) for minor thickness surface
face treatments, etc. leveling. For higher thickness leveling, use Sikafloor®-
▪ Concrete substrates must be prepared mechanically 190 Screed.
using abrasive blast cleaning or scarifying equipment Coating:
to remove cement laitance and achieve an open tex- Sikafloor®-264 SG as coating, can be applied by short-
tured surface. piled roller (crosswise).
▪ Weak concrete must be removed and surface defects Seal coat:
such as blow holes and voids must be fully exposed. Sealer coats can be applied by squeegee and then
▪ Repairs to the substrate, filling of blowholes/voids back-rolled (crosswise) with a short-piled roller.
and surface levelling must be carried out using ap-
propriate products from the Sikafloor®, Sikadur® and CLEANING OF EQUIPMENT
Sikagard® range of materials.
▪ All dust, loose and friable material must be com- Clean all tools and application equipment with Thinner
pletely removed from all surfaces before application C immediately after use. Hardened and/or cured ma-
of the product, preferably by brush or vacuum. terial can only be removed mechanically.

MIXING MAINTENANCE
Prior to mixing, stir part A mechanically. When all of CLEANING
part B has been added to part A, mix continuously for
3 minutes until a uniform mix has been achieved. To maintain the appearance of the floor after applica-
When parts A and B have been mixed, add the quartz tion, Sikafloor®-264 SG must have all spillages re-
sand and if required the Extender T and mix for a fur- moved immediately and must be regularly cleaned us-
ther 2 minutes until a uniform mix has been achieved. ing rotary brush, mechanical scrubbers, scrubber dry-
To ensure thorough mixing pour materials into anoth- er, high pressure washer, wash and vacuum tech-
er container and mix again to achieve a consistent mix. niques etc. using suitable detergents and waxes. For
Over mixing must be avoided to minimise air entrain- further details please refer to the Method Statement
ment. "Cleaning & Maintenance of Sikafloor® Systems".

MIXING TOOL LOCAL RESTRICTIONS

Sikafloor®-264 SG must be thoroughly mixed using a
low speed electric stirrer (300 to 400 rpm) or other Note that as a result of specific local regulations the
suitable equipment. For the preparation of mortars declared data and recommended uses for this product
use a forced action mixer of rotating pan, paddle or may vary from country to country. Consult the local
trough type. Free fall mixers should not be used. Product Data Sheet for exact product data and uses.

Product Data Sheet

Sikafloor®-264 SG
April 2022, Version 04.01
020811020020000065

5/6
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product
Data Sheet for the product concerned, copies of which
will be supplied on request.

SIKA NORTHERN GULF SIKA SOUTHERN GULF Sika Saudi Arabia

Bahrain / Kuwait UAE / Oman / SIC Riyadh / Jeddah / Dammam
Tel: +973 177 38188 Tel: +971 4 439 8200 Tel. +966 11 217 6532
[email protected] [email protected] [email protected]
gcc.sika.com gcc.sika.com gcc.sika.com

Sikafloor-264SG-en-AE-(04-2022)-4-1.pdf

Product Data Sheet

Sikafloor®-264 SG
April 2022, Version 04.01
020811020020000065

6/6
 METHOD
STATEMENT
METHOD STATEMENT
Sikafloor®- 264SG - General MS
OCT 2019 / SIKA GCC / IVAN PETROVIC

FLOORING
TABLE OF CONTENTS
1 SCOPE 3
2 SYSTEM DESCRIPTION 3
2.1 USES 3
2.2 PRODUCTS 3
2.3 CHARACTERISTICS/ ADVANTAGES 4
3 SYSTEM BUILD-UP 5
4 SUBSTRATE PREPARATION 6
4.1 SUBSTRATE PRE-REQUISITES 6
4.2 SURFACE PREPARATION 7
5 SURFACE LEVELLING USING SIKAFLOOR®-PS 8
5.1 USES 8
5.2 MIXING 8
5.3 APPLICATION 8
6 PRIMING USING SIKAFLOOR®-161/161 G 8
6.1 MIXING 8
6.2 APPLICATION 8
7 INTERMEDIATE COAT USING SIKAFLOOR®-264 SG 9
7.1 MIXING 9
7.2 APPLICATION 9
7.3 CURING 9
8 UV STABLE TOP COAT USING SIKAFLOOR®-359 SG/BH 9
8.1 MIXING 9
8.2 APPLICATION 10
8.3 CURING 10
9 TOOLS AND EQUIPMENT 10
10 CLEANING 11
10.1 INITIAL CLEAN: 11
10.2 PRE-USE INSPECTION: 11
10.3 PRECAUTIONS: 11
10.4 LOOKING AFTER YOUR FLOOR: 11
10.5 SPILLAGES: 12
11 HEALTH AND SAFETY RECOMMENDATION 12
12 LEGAL NOTE 13
13

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

2/13
1 SCOPE
This method statement describes the step by step procedure for application of Sikafloor®-264 SG
(2 part, high-build, solvent free, colored epoxy coating), with smooth or slip resistance
finish, with an option to add a UV resistant top coat for exposed areas.

2 SYSTEM DESCRIPTION
Sikafloor-264 SG (2 part, high-build, solvent free, colored epoxy coating), with smooth or slip
resistance finish for concrete substrates expecting normal to medium-heavy wear usage.
Recommended for basement & ground floor car parks or on intermediate traffic decks with little
or no structural movement, in addition to staircases, BOH rooms, etc.. Suitable for use in hot
and tropical climatic conditions.

2.1 USES
- Roller coat for concrete and cement screeds, for:
- Storage.
- Assembly halls.
- Maintenance workshops.
- Garages.
- Loading ramps.
 Broadcast system for:
- Mutli-storey car parks.
- Underground Carparks.
- Maintenance Hangers.
- Wet areas;
- Beverage.
- Food Industry.
2.2
-
PRODUCTS
The system consisting of a primer, base coat, top coat & UV resistant top
coat. Note: Please refer to section 3 "System Build-Up"

PRODUCTS PHOTO
Sikafloor® -161/161G
Two part, solvent free epoxy resin binder for priming,
levelling mortars and screeds

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

3/13
Sikafloor® -264 SG
Two part, high-build, solvent free, coloured epoxy resin

Sikafloor®-359 SG/BH
Two part tough-elastic, coloured, UV resistant, non-
yellowing, polyurethane seal coat.

Sikafloor®-PS
Two part, solvent-free, thixotropic, two component,
adhesive and fine pore sealing and smoothing repair Putty,
based on a combination of epoxy resins and specially
selected high strength fillers.

Sikadur®-Aggregates
Selected quartz sand of special grading used to provide Slip
resistant finish

2.3 CHARACTERISTICS/ ADVANTAGES

 Excellent abrasion and wear resistance

 Good general chemical resistance
 Easy application by brush roller and squeegee
 Economical
 Liquid proof
 Gloss finish
 Slip resistant surface possible

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

4/13
3 SYSTEM BUILD-UP

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

5/13
4 SUBSTRATE PREPARATION

4.1 SUBSTRATE PRE-REQUISITES

Concrete substrates must be of good condition with a pull off strength and compressive
strength as mentioned below:

Procedure Equipment
Pull off Compressive Strength
• The concrete substrate must be sound.
• Compressive strength minimum 25 N/mm2.
• Pull off strength > 1.5 N/mm2.

Moisture Content
• Substrate moisture content should be < 4% pbw
• If found above 4%, Sikafloor® EpoCem® may be applied as a
T.M.B.(temporary moisture barrier) system.

Air Humidity
• Relative air humidity max. 80%.
• Beware of condensation. The substrate temperature must
be at least 3°C above dew point.

Substrate & Ambient Temperature

• Substrate temperature > 10°C.
• Ambient temperature < 35°C.
Note: In case of temperature is >35°C please consult Sika's Technical
Department

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

6/13
4.2 SURFACE PREPARATION
Concrete substrates must be mechanically prepared using abrasive blast cleaning, , surface
grinding or captive blasting (Acid etching is not recommended) to remove cement laitance,
existing coatings and achieve a gripping profile that is clean, dry and free from laitance, dirt,
grease, oil and any other form of surface contamination. Vacuum blasting or similar techniques
are ideally suited.
Procedure Equipment

Vacuum shot blasting / Surface grinding

Concrete substrates must be prepared mechanically using
abrasive blast cleaning or scarifying equipment to remove
cement laitance and achieve a profiled open textured.
Vacuum blast cleaning is ideally suited, but depending of
concrete substrate, surface grinding is also possible.

Cleaning of the surface

All dust, loose and friable material must be completely removed
from all surfaces before application of the product, preferably
by brush and
vacuum.

Clean substrate
The surface must be clean, dry and free of all contaminants, e.g.
dirt, oils, grease, coatings and surface treatments, etc.

Surface defets
Substrate defects, such as cracks, blow holes and voids must be
repaired using appropriate products from the SikaTop®, Sika®
MonoTop®, Sikafloor®, Sikadur® or Sikagard® range.

 The selected method of preparation will depend on the surface condition, environmental
constraints and availability of services. The method may be selected on the basis of trial
areas, approved by the Contract Administrator. For additional information, please refer to
Sika's Method statement for "Evaluation and Preparation of Surfaces", available upon
request.

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

7/13
5 SURFACE LEVELLING USING SIKAFLOOR®-PS

5.1 USES
 Concrete minor repairs such as blow holes, pin holes, etc.
 General smoothing/re-profiling over large areas. Suitable for feather edge to 3mm.
 Filling pinholes prior to overcoating with Sikafloor®/ Sikagard® products.
 Filling Cracks and surface sealing.

5.2 MIXING
 Mix components (A+B) together for at least 3 minutes with a mixing paddle attached to a
slow speed electric drill (max. 400 R.P.M.) until the material becomes smooth in consistency
and even grey colour of the mixture is obtained.
 Material in industrial packing must be stirred well before mixing.
 Avoid aeration while mixing.
 Mix only full sets (kits). Partial mixing is not recommended.

5.3 APPLICATION
 Sikafloor®-PS has easy workability and can be applied with trowel/ scraper/ spatula.
 Sikafloor®-PS can be overcoated with Sikafloor® systems after 12-24 hours @25°C-35°C.
 Maximum layer thickness is 3mm.
 Work within the potlife of the material (15 minutes at 30°C).
 Clean all tools and application equipment with Thinner C immediately after use.
 Hardened and / or cured material can only be removed mechanically.

6 PRIMING USING SIKAFLOOR®-161/161 G

6.1 MIXING
 Prior to mixing, stir component A (resin) and add all of component B (hardener).
 Make sure the hardener is fully emptied into the resin component.
 Mix both components thoroughly with a low speed electric stirrer (300 - 400 rpm).
 Mix for at least 3 minutes until a uniform mix has been achieved.
 Transfer mixed material to a clean container.
 Mix for another minute.
 Mix only full sets (kits). Partial mixing is not recommended.
6.2 APPLICATION
 Make sure, that all substrate requirements are met, such as temperature, moisture content
of the prepared substrate etc.
 Apply Sikafloor-161/161G, if the moisture content is below 4%,. If the moisture content is
above 4%, apply Sikafloor EpoCem system as a temporary moisture barrier.

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

8/13
 Apply the mixed material by roller, taking care to ensure good wetting of the substrate.
 Freshly applied Sikafloor®-161/161G should be protected from damp, condensation and
water for at least 24 hours.
 Apply by brush, roller or squeegee and work well into the substrate.
 Work within the potlife of the material (15 minutes at 30°C).
 Clean all tools and application equipment with Thinner C immediately after use.
 Hardened and / or cured material can only be removed mechanically.

7 INTERMEDIATE COAT USING SIKAFLOOR®-264 SG

7.1 MIXING
 Prior to mixing, stir part A mechanically.
 When all of part B has been added to part A, mix continuously for 2 minutes until a uniform
mix has been achieved.
 To ensure thorough mixing pour materials into another container and mix again to achieve a
consistent mix.
 Over mixing must be avoided to minimise air entrainment.
 Sikafloor®-264 SG must be thoroughly mixed using a low speed stirrer (300 - 400 rpm) or
other suitable mechanical equipment.
 Mix only full sets (kits). Partial mixing is not recommended.
7.2 APPLICATION
 Apply first coat of Sikafloor®-264 SG by short-piled roller .
O
 Wait minimum 16 hours or maximum 24 hours at 30 C before you apply sealer coat
 Clean all tools and application equipment with Thinner C immediately after use.
 Hardened / cured material can only be mechanically removed.

7.3 CURING
 Foot traffic (+30OC) ~ 18 hours.
 Light traffic (+30OC) ~ 2 days.
 Full cure (+30OC) ~ 5 days.
 Curing times are approximate and will be affected by changing ambient conditions.

8 UV RESISTANT TOP COAT USING SIKAFLOOR®-359 SG/BH

8.1 MIXING
 Prior to mixing, stir part A mechanically.
 When all of part B has been added to part A, mix continuously for 2 minutes until a uniform
mix has been achieved.
 To ensure thorough mixing pour materials into another container and mix again to achieve a
consistent mix.

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

9/13
 Over mixing must be avoided to minimise air entrainment.
 Sikafloor®-359 SG must be thoroughly mixed using a low speed stirrer (300 - 400 rpm) or
other suitable mechanical equipment.

8.2 APPLICATION
 Apply first coat of Sikafloor®-359 SG by short-piled roller .
 Clean all tools and application equipment with Thinner C immediately after use.
 Hardened / cured material can only be mechanically removed.

8.3 CURING
 Foot traffic (+30°C) ~ 18 hours.
 Light traffic (+30°C) ~ 2 days.
 Full cure (+30°C) ~ 5 days.
 Curing times are approximate and will be affected by changing ambient conditions.

9 TOOLS AND EQUIPMENT

Professional equipment is required to achieve a functioning floor, such as: vacuum shot blaster,
grinder, scabbler etc.
For additional information, please refer to Sika's Method Statement "Mixing and Application of
Flooring systems", available upon request.

Procedure Equipment

Preparation of the substrate:

Blast cleaning or other mechanical means.
E.g. Blastrac.

Even application of Sikafloor®- 264 SG base coat:

Sikafloor®-264 SG with short piled roller.
E.g. Polyplan roller and brush.

Recommended Supplier of Tools:

 PPW-Polyplan-Werkzeuge GmbH, Phone: +49 40/5597260, www.polyplan.com
 TECHNO-Werkzeuge A.E; Vertriebs GmbH Dieselstr. 44; 42579 Heiligenhaus, Phone: 02056)
9846-0 / [email protected]; Homepage: http://www.techno-vertrieb.de/

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

10/13
10 CLEANING
To ensure that your Sika flooring system stays in the
best of shape and gives you years of satisfaction the
correct cleaning and maintenance schedule should be
used.
When first installed and fully cured your floor should
be cleaned with an appropriate floor cleaner using the
most suitable equipment for the area concerned.

10.1 INITIAL CLEAN:

 Firstly, you should sweep the area to remove any loose debris.
 An inspection of the flooring area is mandatory to distinguish areas that require individual
treatment such as oil spillages or scuff marks from shoes or fork lift tyres.
 Application of industrial cleaning detergents to these areas, either as supplied or diluted with
water, then given some agitation and allowed to dwell for 5 to 10 minutes will help to remove
these.
 The floor area should then be cleaned using a mild alkaline cleaner or the heavier duty
alkaline cleaner.
 Method of and equipment for the cleaning of the area will depend upon size and manpower
available.
 On site surveys should be carried out by a professional specialist floor cleaning company.

10.2 PRE-USE INSPECTION:

 The floor should now be inspected to ensure that it has been cleaned to your required
standard and that all soiling has been removed.

10.3 PRECAUTIONS:
 If you will now be placing equipment, storage racking, goods, furniture, filing cabinets etc. on
the floor, then every effort should be taken to minimise surface scratching and marking.
 Dragging of heavy articles across the flooring may damage the surface.
 Fork lift trucks should be driven with care to avoid marking caused by wheel spin or slide.

10.4 LOOKING AFTER YOUR FLOOR:

 If the correct cleaning and maintenance schedule is used, the appearance of your floor can be
easily maintained.
 For floors with a high gloss finish it is acceptable practice to lay a sacrificial layer of an acrylic
polish, which will keep the high gloss finish, give a hard wearing surface, have the ability to
allow for the removal of surface scratches or blemishes, whilst still incorporating anti-slip
properties.

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

11/13
 Once the above action or the decision to leave the floor as supplied has been taken, then the
floor will require regular cleaning with either a neutral or mildly alkaline floor cleaner
depending upon the type and level of soiling encountered.
 If you have decided to use a sacrificial surface polish on your floor then any visible wear can
be overlaid with a fresh coat. However, if continual additions of coats are made then it may
be necessary to occasionally remove the polish and start-a-fresh.

10.5 SPILLAGES:
 Spillages of any liquid should be wiped up or absorbed and removed as soon as possible. Not
only is this a responsible action as far as Health and Safety is concerned, it will also help you
to keep your floor in good condition.
 Once the spillage is removed the area should be cleaned as usual with your standard floor
cleaner.
 If a sacrificial coat has been previously applied the floor should be inspected to see if this
remains. If not, it should be reapplied as soon as possible.

11 HEALTH AND SAFETY RECOMMENDATION

 Ensure sufficient ventilation during application.
 Wear proper safety equipment (gloves, eye goggles, safety boots and protective clothes)
during application.
 For more details, refer to Individual Safety Data Sheet (available upon request).

Method Statement Sika GCC

Sikafloor®- 264SG - General MS - Car Parks Flooring

12/13
12 LEGAL NOTE
The information, and, in particular, the recommendations relating to the application and end-
use of Sika products, are given in good faith based on Sika's current knowledge and experience
of the products when properly stored, handled and applied under normal conditions in
accordance with Sika’s recommendations. in practice, the differences in materials, substrates
and actual site conditions are such that no warranty in respect of merchantability or of fitness
for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be
inferred either from this information, or from any written recommendations, or from any other
advice offered. The user of the product must test the products suitability for the intended
application and purpose. Sika reserves the right to change the properties of its products. The
proprietary rights of third parties must be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always refer to the most recent issue of the local
Product Data Sheet for the product concerned, copies of which will be supplied on request.

© 2013 Sika Services AG / Nr 850 73 05

Sika GCC Version given by

Flooring Ivan Petrovic
Phone: +971 4 439 8200
Fax: +971 4 439 3606
Dubai Mail: [email protected]
gcc.sika.com
 DCL
CERTIFICATE
 CERTIFICATE OF PRODUCT CONFORMITY
Dubai Central Laboratory Department (DCLD) of Dubai Municipality
hereby attests that the product(s)

Low Emitting Materials

(Details as per the attached Scope of Certification)
manufactured by:

SIKA UAE L.L.C

Plot No 61-0 DM No. 533-279, Saih Shuaib 4, Dubai Industrial City, P.O. Box 126212, Dubai, UAE
have been assessed in accordance with DCLD Document Ref. No. DM-DCLD-RD-DP21-2001 (IC) "General Rules for DM third party product
certification system through factory assessment" and the relevant Specific Rules, and were found in conformity with the standard specification:

2020 AL SA'FAT DUBAI GREEN BUILDING SYSTEM

Accordingly, DCLD hereby authorizes the above manufacturer
to affix the DCL Product Conformity Mark on the above-mentioned product(s).

ARIF AL MARZOOQI
Certification and Quality Control of Products Section Manager
Dubai Central Laboratory Department-Dubai Municipality

Certificate No: CL17020432 Current Issue Date: 26/02/2023

Valid Until: 25/02/2024 Original Issue Date: 26/02/2017

DM-DCLD-F-IC-2031 Rev 20
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

Certificate Issued To: SIKA UAE L.L.C.

Plot No 61-0 DM No. 533-279, Saih Shuaib 4,
Dubai Industrial City (DIC), P.O. Box 126212, Dubai, UAE
Applicable Standard Specification: 2020 Al Sa’fat Dubai Green Building System.
Applicable Specific Rules: DM-DCLD-RD-DP21-2180-(IC) Specific Rules for Certification
of Low Emitting Materials (Paints, Coatings, Adhesives,
Sealants) As per the 2020 Al Sa’fat Dubai Green Building
System.
S/N PRODUCT DESCRIPTION BRAND NAME PRODUCT DETAILS

Sika Seal-105 (A+B)

SikaTop Seal-107 (A+B)
(Water Base)
Sikalastic-152 AE (A+B)
Sikafloor-20 PurCem AE (A+B) (AL SA’FAT-DGBS VOC limit

Sikafloor-21 PurCem AE (A+B) is max. 140 g/l)

Sikafloor-29 PurCem AE (A+B) (For interior applications)

Sikafloor-31 PurCem AE (A+B) These products are produced

Sikagard-65 WN in SIKA - UAE
Sikafloor®-220 W Conductive
Two pack reactive performance
coatings for specific end use (Water Base)
1. such as floors
(AL SA’FAT-DGBS VOC limit
(Product Sub-category: 10)
is max. 140 g/l)
Sikagard-270
(For interior applications)
These products are produced
in SIKA Gulf - Bahrain
Sikafloor-324
(Solvent Base)
Sikafloor-3240
Sikafloor-264 (AL SA’FAT-DGBS VOC limit

Sikafloor-264 SG is max. 500 g/l)

Sikafloor-263 SL (For interior applications)

Sikagard-62 These products are now being
Sikagard PW produced in SIKA – UAE
Sikalastic-702

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

Sikalastic® -835 I*
Sikalastic® -859R *
Sikalastic® -8440*
Sikalastic-8850
Sikafloor®-304 W
Sikafloor®-305 W
Sikafloor®-305 W ESD
Sikafloor®-262 AS N
Two pack reactive performance
Sikafloor-700
coatings for specific end use
Sikafloor-190 Screed
2. such as floors
Sikafloor Terrazzo SA
(Product Sub-category: 10)
Sikafloor® -267SG*
Sikafloor® -2350 ESD*

Sikafloor-81 EpoCem (Solvent Base)

Sikafloor-LM (AL SA’FAT-DGBS VOC limit
Two pack reactive performance is max. 500 g/l)
Sikalastic-851
coatings for specific end use (For interior applications)
3. such as floors Sikalastic-851 R These products are produced
(Product Sub-category: 10) Sikalastic-8800 in SIKA Gulf – Bahrain

(Solvent Base)
Roof Coating/Coating Applied to
Hardscapes (AL SA’FAT-DGBS VOC limit
is max. 500 g/l)
Sikafloor-359 SG
(For Exterior applications)

SRI: CLASS 1 for White color –

See Note #3
These products are produced
in SIKA Gulf - Bahrain

(Solvent Base)
4. Two pack reactive performance
Sikalastic-701 (AL SA’FAT-DGBS VOC limit is
coatings for specific end use
max. 500 g/l)
such as floors,
(Product Sub-category: 10) SRI: CLASS 1 for White color –
See Note #3
Roof Coating/Coating Applied to Sikafloor-359 BH (For exterior applications)
Hardscapes These products are produced in
SIKA - UAE

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

(Water Base)

(AL SA’FAT-DGBS VOC limit

is max. 30 g/l)
Sikafloor-CureHard-24
(For interior/Exterior
applications)
These products are produced
5. Binding Primers in SIKA Gulf - Bahrain
(Product Sub-category: 8)
Sika Latex (Water Base)

SikaBond DV (AL SA’FAT-DGBS VOC limit is

max. 30 g/l)
SikaTop Armatec-110 EpoCem
(For interior/exterior applications)
These products are produced in
Sikafloor® -02 Primer *
SIKA - UAE

(Solvent Base)
Sikafloor PS (AL SA’FAT-DGBS VOC limit
is max. 750 g/l)

(For interior/Exterior
applications)
Sikadur PF
This product is produced in
SIKA Gulf - Bahrain

Sikagard-700 S
6. Binding Primers (Solvent Base)
(Product Sub-category: 8) Sikadur PF
(AL SA’FAT-DGBS VOC limit
is max. 750 g/l)
Sikafloor PS
(For interior/exterior

Sikafloor®-101 PS* applications)

These products are produced

SikaBit P-12 AE in SIKA - UAE

Sika Astar (Water Base)

Sikagard-552 W Aquaprimer (G) (AL SA’FAT-DGBS VOC limit is

max. 30 g/l)

Sikagard-720 EpoCem (For interior/Exterior applications)

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

These products are produced in

Sikagard-Putty SIKA Gulf – Bahrain

7. Primers (Solvent Base)

(Product Sub-category: 7)
(AL SA’FAT-DGBS VOC limit is

Sika Concrete Primer max. 350 g/l)

(For interior/Exterior applications)

These products are produced in
SIKA Gulf - Bahrain

SikaFloor® ‐151*
(Solvent Base)

Sikafloor-161 (AL SA’FAT-DGBS VOC limit

is max. 350 g/l)

Sikafloor‐161 G (For interior applications)

These products are produced
Sikagard‐705 L in SIKA - UAE

ARCHITECTURAL
Sikaseal‐410 PG
(AL SA’FAT-DGBS VOC limit
is max. 250 g/l)
8. Sealants
Sikaseal‐411 GG
(For interior/exterior
applications)

Sikasil® IG ‐200* These products are produced

in SIKA - UAE

SikaCeram-51

SikaCeram-101

SikaCeram-117

SikaCeram-118

SikaCeram-201 Ceramic tiles adhesive

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

SikaCeram-201 LM (A+B) (AL SA’FAT-DGBS VOC

9. Adhesives
limit is max 65 g/l)
SikaCeram-216
These products are produced
SikaCeram-217 in SIKA – UAE

SikaCeram-255 StarFlex LD-AE

SikaCeram®-401 RTA*

SikaCeram-500 TG AE

SikaCeram-502 LM (A+B)

SikaCeram-502 TG AE

SikaCeram-503 TG

SikaCeram-801 RTG
10. Adhesives

SikaCeram RTG Ceramic tiles adhesive

(AL SA’FAT-DGBS VOC

limit is max 65 g/l)
Sikadur-43 TA These products are produced
in SIKA Gulf – Bahrain

Sikadur-30 LP
Special Purpose Contact
Sikadur-330 Adhesive
(AL SA’FAT-DGBS VOC limit
11. Adhesives Sikadur-300 is max 250 g/l)
These products are produced
Sikadur-31 CF Slow
in SIKA Gulf – Bahrain

Sikadur-31 DW

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

Sikadur-31 SBA (h) S-02

Sikadur-31 SBA 30-50

Sikadur-31 SBA S-03

Sikadur-31 SBA S-04

Sikadur-31 SBA S-08

Sikadur-32 LP

Sikadur-31 SBA S-02 MY

Sikasil® SG-500 CN*

Special Purpose Contact

SikaBond® -101*
Adhesive

SikaProof Adhesive-01 (AL SA’FAT-DGBS VOC limit

is max 250 g/l)
Sikadur-31 CF Slow These products are produced
in SIKA - UAE

Sikadur-41 CF Slow

Sheet Applied Rubber Lining

Operations
12. Adhesives
Sika® Bitumen Adhesive-270 (AL SA’FAT-DGBS VOC limit
is max 850 g/l)

This product is produced in

SIKA – UAE

(Water Base)

13. One-pack Performance Coating Sikagard-550 W Elastic (G)

(AL SA’FAT-DGBS VOC limit

(Product Sub-category 9) is max. 140 g/l)

(For Exterior applications)

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

SRI: CLASS 1

LRV: Class 1
Sikalastic-560 GCC
for White color – See Note #3
These products are produced
in SIKA Gulf – Bahrain

(Water Base)

(AL SA’FAT-DGBES VOC limit

Sikalastic WR
is max. 140 g/l)

(For Interior applications)

These products are produced
in SIKA Gulf – Bahrain

(Solvent Base)

(AL SA’FAT-DGBS VOC limit

Sikalastic-601 BC
is max. 500 g/l)

(For Interior applications)

The product is produced in
SIKA Gulf - Bahrain

(Solvent Base)

(AL SA’FAT-DGBS VOC limit

is max. 500 g/l)
Sikalastic‐311 (AE)
(For Interior applications)

The product is produced in

SIKA - UAE

Sika Monotop‐109 Waterproofing AE

(Water Base)

Igasol Emulsion BA (AL SA’FAT-DGBS VOC limit

is max. 140 g/l)
Igasol Emulsion BA‐10
(For Interior applications)
Igasol Emulsion BA‐6510
These products are produced
Sika Bitumen AE in SIKA - UAE

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

(Solvent Base)
Sikalastic-621 TC
(AL SA’FAT-DGBES VOC limit
is max. 500 g/l)

(For Exterior applications)

14. One-pack Performance Coating Sikagard-680 SG
(Product Sub-category 9) SRI: CLASS 1

LRV: Class 1

for White color – See Note #3

Sikalastic-614
These products are produced
in SIKA Gulf - Bahrain

(Water Base)

15. One-pack Performance Coating (AL SA’FAT-DGBS VOC limit

(Product Sub-category 9) is max. 140 g/l)

(For Exterior applications)

Coatings (other than paint) for Sikagard-520 W
LRV: Class 1
exterior/exposed wall
application for White color – See Note #3
These products are produced
in SIKA Gulf – Bahrain

NOTE 1: This document forms an integral part of the Certificate of Product Conformity bearing the same
certificate number.
NOTE 2: The above product shall bear the DCLD Conformity Mark.
NOTE 3: For colors/types not covered by the Scope, SRI and LRV shall be tested and classified based on
the application of the product in the construction site to ensure that it meets the requirements of the
2020 Al Sa’fat Dubai Green Building System.

o SRI Class 1 (> 78) – “Can be Used in 75 - 100% of surface to be coated – Sloped or Flat
Roof”
o SRI Class 2 (29<78) - “Can be Used in 75 - 100% of surface to be coated – Sloped Roof”

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
 DUBAI CENTRAL LABORATORY DEPARTMENT
DCLD-CQPS PRODUCT CONFORMITY CERTIFICATION SCHEME
SCOPE OF CERTIFICATION
FOR CERTIFICATE NO. CL17020432

o SRI Class 3 (< 29 or untested) – “Can be Used in 0 – 25% of surface to be coated –

Sloped or Flat Roof provided the remaining area is Class 1 or 2”

o LRV Class 1 (>45) – “Can be used in 75-100% of surface to be /painted/coated”

o LRV Class 2 (<45 or untested) – “Can be used in 0-25% of surface to be painted/coated
provided the remaining area is Class 1”.

Original Issue Date: 26 February 2017

Current Issue Date: 26 February 2023
Valid Until: 25 February 2024

ARIF AL MARZOOQI
MANAGER
CERTIFICATION AND QUALITY CONTROL OF PRODUCTS SECTION

DM‐DCLD‐F‐IC‐2032 R10
P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE
OPEN DATA / ‫ﺑﻴﺎﻧﺎت ﻣﻔﺘﻮﺣﺔ‬
COLOR CHART /
BROCHURE
FLOORING SOLUTIONS
Sikafloor® EPOXY COLOR
SOLUTIONS
SIKA FULL RANGE SOLUTIONS
FOR CONSTRUCTION:

FOR SIKA GCC INFORMATION:

gcc.sika.com

WHO WE ARE
Sika is a globally active specialty chemicals company supplying the building
and construction industry, as well as manufacturing industries. Sika is a leader
in processing materials used in sealing, bonding, damping, reinforcing and
protecting loadbearing structures. Sika’s product lines feature high quality
concrete admixtures, specialty mortars, sealants and adhesives, damping and
reinforcing materials, structural strengthening systems, industrial flooring as
well as roofing and waterproofing systems.

Our most current General Sales Conditions shall apply.

Please consult the Data Sheet prior to any use and processing.

Sika UAE LLC Sika International Chemicals LLC Sika Saudi Arabia Co. Ltd Sika Oman
P.O. Box 126212 P.O. Box 55172 P.O. Box 58647, Riyadh 11583 P.O.Box 1067, Postal Code 130 Azaiba
Dubai, UAE Abu Dhabi, UAE Kingdom of Saudi Arabia Muscat, Sultanate of Oman
T: +971 4 439 8200 T: +971 2 643 0364 T: +966 11 2176532 T: +968 2412 4826
F: +971 4 439 3606 F: +971 2 676 0840 F: +966 11 4193607 F: +968 2412 4852
[email protected] [email protected] [email protected] [email protected]

Sika Gulf B.S.C. Sika Qatar LLC Sika Kuwait for Construction
P.O. Box 15776 P.O.Box 201847 Materials & Paints W.L.L
Adliya, Bahrain Doha, Qatar State of Kuwait
T: +973 17 738 188 T: +974 40163366 T: +965 2228 2296
F: +971 17 732 476 F: +974 40163370 F: +965 2228 2297
[email protected] [email protected] [email protected]
FLOORING
SUSTAINABLE SOLUTIONS
MORE VALUE LESS IMPACT
 SIKA CONTRIBUTION TO
SUSTAINABLE CONSTRUCTION
More Value – Less Impact

Providing high-performance solutions – to the benefit of our Sika strives to create more value for all its stakeholders with its
customers and sustainable development products, systems and solutions along the whole value chain
Sika is committed to pioneering sustainable solutions to address and throughout the entire life span of its products. The value
global challenges – and to achieve this safely and with the lowest created by far outweighs the impacts associated with produc-
impact on resources. tion, distribution and use. Sika is committed to measure, improve
Sika is dedicated to sustainable development, assuming respon- and communicate sustainable value creation: “More value, less
sibility to provide sustainable solutions in order to improve mate- impact” refers to the company’s commitment to maximize the
rial, water and energy efficiency in construction and transporta- value of its solutions to all stakeholders while reducing resource
tion. consumption and impact on the environment.

PUBLIC BUILDINGS FOOD INDUSTRY

INSTALL Sikafloor® SYSTEMS THAT MEET YOUR DESIGN AN INDUSTRIAL FLOOR THAT WILL LAST
AESTHETIC AND TECHNICAL REQUIREMENTS

More Value More Value

 Sika ComfortFloor® provides high quality of life with an excel-  Sikafloor® PurCem® has a high resistance against chemical,
lent acoustic performance and freedom of design mechanical and thermal attack
 Sika ComfortFloor® is robust and fully bonded to the concrete  Sikafloor® PurCem® contributes to points in various green build-
creating a monolithic floor ing programs
 Sika ComfortFloor® is biologically resistant and withstands the
impacts of cleaning and use of detergents and desinfectants Less Impact
 Sika ComfortFloor® contributes to points in various green build-  Sikafloor® PurCem® installed in thickness above 6 mm has
ing programs superior thermal resistance
 Sikafloor® PurCem® has a seamless surface that requires less
Less Impact cleaning and maintenance which therefore requires less energy
 Sika ComfortFloor® has a lower Carbon Footprint since it does and less cleaning materials
not need any cementitious underlayment  Sika® PurCem® Gloss has a lower carbon footprint compared to
 Sika ComfortFloor® does not need any adhesive other thin competitive technologies
 Sika ComfortFloor® is easy to clean as it is seamless

FLOORING
2 SUSTAINABLE SOLUTIONS MORE VALUE LESS IMPACT
PARTNERSHIPS AND INITIATIVES SUPPORTED BY SIKA (AMONG OTHERS)

CLEANROOM ENVIRONMENTS CAR PARKING AREAS

SELECT AN APPROVED Sikafloor® “CLEANROOM SELECT LIGHTWEIGHT MATERIALS FOR YOUR BUILDING
SUITABLE MATERIAL”

More Value – Less Impact More Value

 With Sikafloor® CR (cleanroom) there is no need for additional  Sikafloor® has an excellent aesthetic appereance
adhesive, underlayment, or damp-proof membranes  Sikafloor® is easier to clean and maintain compared with
 Sikafloor® CR is seamless- with no joints and no welding asphalt
 The Sikafloor CR contributes to various green building programs  Sikafloor® provides protection for the concrete and prevents the
 Sika offers a full range of flooring, coatings and sealants solu- ingress of water and chloride
tions for clean rooms: Sikafloor®, Sikagard® and Sikaflex®  Sikafloor® contributes to points in various green building pro-
grams
Less Impact
 Sikafloor®, Sikagard® and Sikaflex® CSM (clean room suitable Less Impact
material) systems are very low in airbone molecular contamina-  Sikafloor® has a lower energy and resource demand during the
tion to provide the cleanest air quality for clean rooms installation phase compared to asphalt
 Sikafloor® CR has a lower energy demand compared to com-
petitive safety PVC solutions

FLOORING
SUSTAINABLE SOLUTIONS MORE VALUE LESS IMPACT 3
ALSO AVAILABLE
FROM SIKA
MORE VALUE
LESS IMPACT
SIKA SUSTAINABILITY

COMMITMENT SOLUTIONS FLOORING

CUSTOMER-FIRST APPROACH
OVER 17,000 DEDICATED EMPLOYEES
LIFE-CYCLE CONCEPT PROVIDES
ADDITIONAL VALUE AND ENHANCED SUSTAINABLE SOLUTIONS
FOCUS ON LEADERSHIP SINCE 1910 PERFORMANCE
SIKA’S VALUES AND MORE VALUE LESS IMPACT
EFFICIENCY RESPONSIBILITY
PRINCIPLES COMPETITIVE-ADVANTAGE SOCIAL INITIATIVES SUPPORTED
THROUGHOUT THE VALUE CHAIN WORLDWIDE

WWW.SIKA.COM/SUSTAINABILITY

1 Sika Sustainability

FOR MORE FLOORING INFORMATION:

WE ARE SIKA
Sika is a specialty chemicals company with a leading position in the
development and production of systems and products for bonding,
sealing, damping, reinforcing and protecting in the building sector
and the motor vehicle industry. Sika's product lines feature concrete
admixtures, mortars, sealants and adhesives, structural strengthening
systems, flooring as well as roofing and waterproofing systems.

© SIKA SERVICES AG / FLOORING / CMDL / SUSTAINABLE SOLUTIONS MORE VALUE LESS IMPACT / 08.2016 / ID:23842

Our most current General Sales Conditions shall apply. Please

consult the most current local Product Data Sheet prior to any use.

SIKA SERVICES AG Contact

Tüffenwies 16 Phone +41 58 436 40 40
CH-8048 Zürich Fax +41 58 436 41 50
Switzerland www.sika.com
 TEST
REPORTS
 TEST REPORT

Test Sponsor
Sika UAE LLC, Dubai Industrial City (DIC), Dubai, U.A.E

Tested Product
Sikafloor® -264 SG

Test Standard
ASTM D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of
Burning of Plastics in a Horizontal Position

Lab Reference No.: FRQ-2206/3492

Lab Project No.: FR-0105/DIP
Lab Report No.: FRR-2206/6805

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 1 of 7
 Test Report

As Per

ASTM D635-18

Testing Laboratory : Material Lab Testing Services L.L.C, DIP1, Dubai

Lab Reference No. : FRQ-2206/3492

Lab Project No. : FR-0105/DIP

Lab Report No. : FRR-2206/6805

Test Standard : ASTM D635-18 Standard Test Method for Rate of
Burning and/or Extent and Time of Burning of Plastics
in a Horizontal Position

Tested Product : Sikafloor® -264 SG

.
Test Sponsor : Sika UAE LLC, DIC, Dubai

Specimen Manufacturer : Sika UAE LLC, DIC, Dubai

Test Sponsor Address : P.O.Box:126212,DIC, Saih Shuaib 4, Dubai, U.A.E

Test Sponsor Tel. No. : 00971 4 4398280

Test Sponsor Fax No. : 00971 4 4393606

Sponsor Website : gcc.sika.com

Date Samples Received : 27/06/2022

Date of test : 29/06/2022

Report Date : 04/07/2022

No. of Pages : 7

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 2 of 7
 TABLE OF CONTENTS

1: INTRODUCTION .........................................................................................................................4

2: INSTRUMENTATION ....................................................................................................................4

3: SPECIMEN SAMPLING, PREPARATION & CONDITIONING ..............................................................4

4: TEST PROCEDURE ....................................................................................................................5

5: OBSERVATIONS & TEST RESULTS .............................................................................................5

6: LIMITATIONS .............................................................................................................................6

APPENDIX 1: SPECIMEN DESCRIPTION ...........................................................................................7

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 3 of 7
 1: INTRODUCTION
Material Lab Testing Services LLC (MLTS), was commissioned by Sika UAE LLC, DIC, Dubai to
determine the rate of burning and/or extent and time of burning of plastics in a horizontal position
in accordance with “ASTM D635-18 Standard Test Method for Rate of Burning and/or Extent and
Time of Burning of Plastics in a Horizontal Position”, for the following specimen:

Sr. No. Specimen Description

Sikafloor® -264 SG is a two-part, high-build, solvent-free, coloured epoxy resin
1
broadcasted with quartz sand to increase slip resistance.
Table 1: Specimen Description

The test was not witnessed by the test sponsor.

2: INSTRUMENTATION
Instruments used to conduct the test have been identified in table 2.

Sr. No. Equipment Description

1 Test chamber with burner
2 Test Fixture
3 Stop Watch
4 Conditioning Room
5 Thermometer
6 Calibrated Scale
7 Hygrometer
8 Calibrated balance
9 Micrometer
10 Wire Gauge
Table 2: Detail of instruments used to perform the test

3: SPECIMEN SAMPLING, PREPARATION & CONDITIONING

3.1 Sampling
Material Lab Testing Services L.L.C., Dubai was not involved in the sampling or selecting
procedure of the specimens. The specimens were tested as received from the sponsor as
shown in figure 1.

Figure 1: Picture of Specimen

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 4 of 7
 3.2 Specimen Preparation
Ten prepared specimens were provided by the sponsor each with a dimension of 125mm length
x 13mm width.

3.3 Conditioning
The specimens were delivered to the lab by the representative of the test sponsor. Prior to
testing the specimens were conditioned as mentioned in table 3.

Temperature 23 0C
Relative Humidity 50 %
Conditioning Duration 48 hrs
Table 3: Conditioning parameters

4: TEST PROCEDURE
The test was conducted using a laboratory burner inside a test chamber. In this test method
nominally specimens with a dimension of 125mm long by 13mm wide were supported
horizontally at one end and exposed to methane gas flame at the free end for 30 seconds. When
the flame front reaches the 25mm mark, the rate of the burn was measured with a timer until the
flame reached the 100mm mark or the flame self-extinguished.

5: TEST RESULTS

Flame application time: 30 seconds

Continued
Flame Flame
burning of
reaches reaches Burn
Specimen specimen Burn Time
25mm 100mm Length Comment
no# after test (s)
reference reference (mm)
flame
mark mark
removal
1 Yes Yes No 25 10
2 Yes Yes No 37 17
3 Yes Yes No 22 15
4 Yes Yes No 34 18
All specimens self
5 Yes Yes No 27 22 extinguishes
6 Yes Yes No 36 18 before reaching
100mm mark
7 Yes Yes No 18 11
8 Yes Yes No 26 20
9 Yes Yes No 31 17
10 Yes Yes No 20 27
Table 4: Test specimen results

The specimens meet the requirements of HB (Horizontal Burning) classification.

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 5 of 7
 6: LIMITATIONS
 This standard is used to measure and describe the response of materials, products, or
assemblies to heat and flame under controlled conditions, but does not by itself incorporate
all factors required for fire hazards or fire risk assessment of materials, products, or
assemblies under actual fire conditions
 The test results relate only to the specimens of the product in the form in which they were
tested. Small differences in the composition of the product may significantly affect the
performance during the test and may therefore invalidate the test results.
 The test was carried out in compliance with the standard test method of ASTM D635-18.

Tested & Prepared By: Reviewed & Approved By:

Mohammed Adel Muhammad Zuhaib Saleem

Fire Testing Engineer Fire Testing Manager

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 6 of 7
 APPENDIX 1: SPECIMEN DESCRIPTION

Sikafloor® -264 SG is a two-part, high-build, solvent-free, coloured

General
1 epoxy resin broadcasted with quartz sand to increase slip
Description
resistance.
2 Composition Pigmented epoxy resin
Density
3 ~ 1.55 kg/L (stated)
(mixed resin)
Solid Content
4 ~ 100 %
(by volume)
Coating
5 ~ 0.8 - 1.2 mm
Thickness
6 Manufacturer Sika UAE LLC, Dubai Industrial City(DIC), Dubai, U.A.E
Layers Product Coverage
Detail of Primer (epoxy resin) Sikafloor® -161 G ~ 0.30 kg/m2
7 Coating First coat (epoxy resin) Sikafloor® -264 SG ~ 0.30 kg/m2
Layers Broadcast (quartz sand) Sikadur®-507 ~ 1.0 kg/m2
Seal coat (epoxy resin) Sikafloor® - 264 SG ~ 0.40 kg/m2
Tested
8 Light Grey
Product Color
Table 5: Specimen description

Note: The above details were either provided by the test sponsor, extracted from the datasheet, or from
other documents provided unless otherwise specified. The testing laboratory does not hold any
responsibility for the information provided as this could not be verified by the testing laboratory.

- - - END OF TEST REPORT - - -

All Rights Reserved

This Report Shall not be reproduced, except in full without written approval by the Laboratory.

Form No: RBP-FR/007-DIP Issue No.: 01 Rev No. & Date : 0 : 03/08/2021 Report No.: FRR-2206/6805 Page 7 of 7
 EAGLE SHIELD TECHNICAL SERVICES
P.O Box: 123663, Dubai, United Arab Emirates
Mobile No. +971-55 654 2727
EAGLE SHIELD Email: [email protected]
Anti-Slip Solutions Website: www.eagleshield-uae.com

Testing Summary Slip resistance Test

Customer / Contact: Test Performed By: Salam

Weatherford Manufacturing & Date: 12th Sep 2021

Abu Dhabi –United Arab Device Used: American Slip Meter
Services
825A
Emirates +971 2 698 9000
PO Number : 15945275

Zone Risk Class Description of Area (Dry Situation) Test Results Dangerous Safe
0.84
0.82
1 1 Optimum Completion assembly 0.87
area Sikafloor 264G
0.82

Average 0.1 0.2 00.30.4 0.5 0.6 0.7 0.8 0.9 1.0
.
3

Zone Risk Class Description of Area (Wet Situation) Test Results Dangerous Safe
0.74
0.82
1 3 Optimum Completion assembly 0.84
area Sikafloor 264G
0.82

Average 0.1 0.2 00.30.4 0.5 0.6 0.7 0.8 0.9 1.0
.
3

Risk Class
*1: Walkway normal dry & free of contaminants
*2: Walkway areas occasionally contaminate
*3: Floors intended for use in wet areas
 Dubai Central Laboratory
Construction Materials Laboratory Section - Chemical Analysis Unit
TEST REPORT
VOC CONT.OF PAINTS & RELATED COATINGS BY DIFF. METHOD

Report No: 100606345 Request No: EMTX-2020-042055

Project No: CF-318 Report Date: 15/07/2020

Project Name: SIKA UAE L.L.C
Consultant: DUBAI MUNICIPALITY

Contractor: SIKA UAE L L C

Location: SITE –
Residential Building Al Muteena (Market Surveillance)
Source: SIKA (UAE) LLC
Sample Description: COATING
Sampling Date/Time: 08/06/2020 11:00 AM Lot Number: EP2003172
Receiving Date/Time: 29/06/2020 08:00 AM Lot Size: NA NA
Sample Size: 1 kilogram Sender No: AJ3273
Material/Mix type: Laying Date/Production Date:

Nominal Size / Working Block Size L * T * H (mm) :

TEST RESULTS
PARAMETERS RESULTS
VOC Content in g/L 31

Sampled By: ABOOBACKER MOIDEENKUTTY Tested By: RAMAKM

Samples Brought By: ABOOBACKER MOIDEENKUTTY Testing Date: 06/07/2020 12:09 PM
Sampling Method: DCL-IC-99 Sampling Report No:
Test Method: BS EN ISO 11890-1:2007 Test Method Variation: NIL

Remarks: PRODUCT NAME: Sikafloor - 264 SG RAL 7012

To verify this document please go to http://login.dm.gov.ae/wps/portal/documentverification and

Enter Document ID: EMTX-2020-042055 and Verification Code: 681-974 or scan the QR code below.

This Report is computer approved and authorized by Chemical Analysis Unit

It does not require any signature

Doc. Ref: F-EM-0100 Rev.No :1

Issue Date: 03/10/2016 Page :1 of 1
P.O. BOX: 67 DUBAI, TEL : 00971-4-3369900, FAX : 00971-4-3366399
E-mail: [email protected] Website: http://www.dm.gov.ae
 PREVIOUS
APPROVALS
 The Engineer The Employer The Contractor

Project Name: DEWA HQ

JDE: 5191721 Asset Name: Al Sheraa Building

Sample Tag Ref. No.: 5191721-SAT-ASB-ARCH-436-3

Originator of Submittal: Alamgir Hossain Date: 22/09/2021

Discipline: Architectural Required By Date: 30/09/2021
Is it a revision?: Yes Programme Start Date: 15/04/2020
Previous Reference: Programme Finish Date: 15/10/2022
Contractor's reference: GHA_SAM-0447-03
Material Submittal Reference :

Item Description: Resinous Flooring RFL-201 (Sikafloor 264SG & SikaDur 507)

Sample Detail
Specification Reference: Section 096726–BOH Resinous Flooring
Area of Use: BOH Resinous Flooring RFL-201

Enclosure
Sample 1 Sample 2 Sample 3
Sample 4 Sample 5

Contractor Statement: We certify that the material submitted herewith is a specimen of the material which to be used in the areas described above, and in compliance
with the contract drawings and specification except as otherwise stated on the related Material Submittal Form. We undertake full responsibility to ensure that the
material delivered at site is same as the approved sample.

Contractor's Authorisation: Alamgir Hossain Date: 22/09/2021 01:41:00 PM

ATKINS Engineer's comments:

Primary Review: Architectural

Reference Remarks
Comments: RAL 7012 smooth finish approved subject to slip resistant not less than R10 on wet and dry
Recommended Approval Code: B - Approved
with Comments
Reviewed By: Hani Elasmi Date: 26/09/2021 01:41:00 PM
Final Approver Comments:

SHODs/Lead Engineer Comments

Reviewed By: Date:

Client Comments

Reviewed By: Date:

ATKINS Resident Engineer's Comments Status

Site Operations Page 1 of 2
RAL 7012 smooth finish approved subject to slip resistant not less than R10 on wet B - Approved with Comments
 PROJECT
REFERENCE
LISTS
 Carpark Flooring References
Customer / m2 Area Product(s) Market
Client / Owner: Project / Description Location: Country
Contractor Applied: Current name Segment
Sikafloor-161, Sikafloor-325,
ASD American School of Dubai Al Ahmadia Aktor Dubai UAE 10,000 m² Car-Parks
Sikafloor-359
Silver Cost, Sikafloor-161, Sikafloor-264,
Mubadala Rehan Hights Abu Dhabi Abu Dhabi UAE 70,000 m² Car-Parks
Samsung JV Sikafloor-359
Sikafloor-161, Sikafloor-325,
Mixed Used @ Sheikh Zeyed Road ACC Dubai UAE 40,000 m² Car-Parks
Sikafloor-359
Al Naboodah
I Rise Tower Dubai UAE 80,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
Contracting

2B+G+4 @ Al Qusais Delta el wadi Dubai UAE 22,000 m² Sikafloor-161, Sikafloor-359 Car-Parks

Construction of Westerngeco
WesternGeco AMANA Abu Dhabi UAE 3,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
Training Facility
Al Dar Laing
Al DAR Al Bandar, Al Raha Beach Abu Dhabi UAE 35,000 m² Sikafloor-325, Sikafloor-264 Car-Parks
O'Rourke
The Land Mark Tower Al Habtoor Abu Dhabi UAE 22,000 m² Sikafloor-325, Sikafloor-264 Car-Parks

Commercial & Residential Building, Sikafloor-325, Sikafloor-264,

Sorouh Real Estate NPC Abu Dhabi UAE 24,000 m² Car-Parks
Danet Abu Dhabi Plot 43 Sikafloor-2430, Sikafloor LM,

Arcan Project 3B+G+45 FLOORS (SIDRA Zelan Holdings (M) Sikafloor-161, Sikafloor-325,
Dubai UAE 35,000 m² Car-Parks
Management Services TOWER) - D.I.C.,DUBAI SDN BHD Sikafloor-264, Sikafloor-359

Centro Point Hotel Centro Point Hotel Shapoorji Pallonji Dubai UAE 3,000 m² Sikafloor-325, Sikafloor-264 Car-Parks
Abu Dhabi Airport's new control Sikafloor-161, Sikafloor-325,
ADPI Kukbo Design Abu Dhabi UAE 6,000 m² Car-Parks
tower Sikafloor-264
Al Naboodah
Mubadalah Sowah Island Bridges Carpark Abu Dhabi UAE 7,000 m² Sikafloor 325, Sikafloor 161 Car-Parks
Contracting LLC
Bin Shafar Sikafloor-161, Sikafloor-325,
Al Nahda Tower Dubai UAE 3,000 m² Car-Parks
Contracting Sikafloor-359
Sikafloor-161, Sikafloor-325,
Sorouh Real Estate Danet Sorouh Building NPC- Beijing Jv Abu Dhabi UAE 19,000 m² Car-Parks
Sikafloor-264
Musanada Car Parks(DOT Project- Kharafi National Sikafloor-161, Sikafloor-325,
Abu Dhabi UAE 18,000 m² Car-Parks
5 levels) LLC Sikafloor-264
 Carpark Flooring References
Customer / m2 Area Product(s) Market
Client / Owner: Project / Description Location: Country
Contractor Applied: Current name Segment
Proposed Commercial &
Residence Bldg. (B+G Al Hudaiba Sikafloor-161,
Dubai UAE 2,000 m² Car-Parks
+6) Basement, drive way Contracting Sikafloor-325, Sikafloor-359
and carparking
BDS LLC
Sikafloor-161,
ENOC Tasjeel (Building Dubai UAE 1,000 m2 Sikafloor-325, Sikafloor-359 Car-Parks
Diagnostics
Ajman Holdings Car-park Complex Solutions) Tek
Construction Ajman UAE 25,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
Al Rakha
Al Ghadeer Al Ghadeer Development Abu Dhabi UAE 2,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
Contracting
Emirates NBD Emirates NBD @ Jafza Aman Steel Dubai UAE 8,000 m² Sikafloor-161, Sikafloor-265 Car-Parks
First Gulf Bank
First Gulf Bank @ Jafza Amana Steel Dubai UAE 6,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
@ Jafza
Al Shafar General Sikafloor-161,
The One Tower Dubai UAE 25,000 m² Car-Parks
Contracting Sikafloor-264, Sikafloor-359
Al Shafar General Sikachapdur Premix BA - Sikafloor
Mixed Used Development Dubai UAE 15,000 m² Car-Parks
Contracting Curehard 24
Max Bogl Emirates
Mubadala Strata Manufacturing @ Al Ain Abu Dhabi UAE 90,000 m² Sikafloor-161, Sikafloor-263SL Car-Parks
Building Contracting

Mohebi Logistics Warehouse Talih Contracting Dubai UAE 8,000 m² Sikafloor-161, Sikafloor-263SL Car-Parks
3B+G+4 @ Karama Al Attar Group Dubai UAE 15,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
TDIC Saadiyat Residances Villas Dhabi Contracting Abu Dhabi UAE 37,000 m² Sikafloor-161, Sikafloor-264 Car-Parks
Ben Hamouda Ben Hamouda Carparck Al Bani Est. Abu Dhabi UAE 25,000 m² Sikafloor-161, Sikafloor-325 Car-Parks
Institute of Carpark Building Phase 2 Saudi
car-parks
Public Industrial flooring Arabia
administration SR -161
Saudi
ALHugait Tower Parking area Mohanad ALKhobar 4000 m2 SR -264 car-parks
Arabia
SR -359
Al Bakali Building (Mena
Al Bakali Co. WLL Art Line Al Seef Bahrain 2,000 m² SR -264, SR -161, SD -507 car-parks
Tower) Basement car park, Al
Seef Tower (Abraj Al Lulu),
Pearl SR -2430SG, SR -359SG, SD
Dadabhai Group Khalifa Hilal Manama Bahrain 30,000 m² car-parks
Multi level Car Parks -507
Bahrain Terna Construction
Manama Bahrain 50,000 m² SR -161, SR -2430SG, SD -507 car-parks
Financial Multi level East Car park Building Co.
Harbour
 Carpark Flooring References
Customer / m2 Area Product(s) Market
Client / Owner: Project / Description Location: Country
Contractor Applied: Current name Segment
Ashgal Car park Al Shorooq Qatar Qatar 20,000 m² SR -161, SR -264, SD -507 car-parks
SR -PS, SR -161, SD -507, SR -
Cultural Village plaza Car park Marbu / Cre-tech Qatar Qatar 70,000 m² car-parks
325, SR -359N
Taleb Group Holiday Villa Car park Spartan/ Cre trch Qatar 15,000 m² SR -161, SR -264 car-parks
Qatar Science & Tech. Park - Car
Qatar Foundation Cre tech Qatar 70,000 m² SR -156, SR -2530W car-parks
park
Al Hamad
Reef Iland Car Park in high rise SR -PS, SR -161, Sikadur 507, SR
Reef Iland Construction and Reef Bahrain 20,000 m² car-parks
building -264
Development Co
Charilaos
Amwaj Waves Amwaj Waves Phase 1 Amwaj Bahrain 24,000 m² SR -3 Quartz Top Natural car-parks
Apostolides
Charilaos SR -PS, SR -161, Sikadur 507, SR
Mokan WLL K Hotel car park Juffair Bahrain 9,000 m² car-parks
Apostolides -264
Al Fateem City Center Maklai Trading Manama Bahrain 2,000 m² SR -161, SR -2430 SG car-parks
AL Hani
Future Mall Car Park Future Mall Al Rai Kuwait 5,000 m² SR -PS, SR -264 car-parks
Construction
SR -PS, SR -161, SR -264, SD -
Ministrey of Interior Car Park MOI Khaled Ali Kharafi Sabhan Kuwait 15,000 m² car-parks
507
Kanar Contracting SR -PS, SR -161, SR -264, SR -
AL Zeina Mall Car Park of Al Zeina Mall Shwaikh Kuwait 17,000 m² car-parks
Co. 359SG, SD - 507
SR -PS, SR -161, SR -359SG, SD -
Diabetes Center Car Park Diabetes Center Sharq Kuwait 5,000 m² car-parks
507
Projects Hid
SR -PS, SR -161, SR -264, SR -
GEMS Office Building Car Park Construction Indurstial Bahrain 4,000 m² car-parks
359SG, SD - 507, SR -LM
Company WLL City
SR -PS, SR -161, SR -264, SR -
Fundament SPC / Diplomatic
Dar II Commercial Building -Car Park Bahrain 6,500 m² 359SG, SD - 507, SR -509, SR - car-parks
Jaser Construction Area
LM
Ahamed Omar
SR -PS, SR -161, SR -264, SR -
Zallaq Real Estae Zallaq Real estae Project Trading & Zallaq Bahrain 1,600 m² car-parks
359SG, SD - 507
Contacting
Ahamed Umar
Um Al SR -PS, SR -161, SR -264, SD -
Zayani Group Zayani Comercial Center -Car Park Trading & Bahrain 1,500 m² car-parks
Hassem 507, SR -LM
Contacting
SR -PS, SR -161, SR -264, SG -
Kooheji Contracting
Fakroo Group Fakroo Tower -Car Park Sanabis Bahrain 15,000 m² 680SG, SD - 507, SR -509, SR - car-parks
Co. / Jaser Contract
LM
 Carpark Flooring References
Customer / m2 Area Product(s) Market
Client / Owner: Project / Description Location: Country
Contractor Applied: Current name Segment
Kooheji Contracting SR -PS, SR -161, SR -264, SD -
Fontana Tower Fontana Tower-Car Park Juffair Bahrain 14,000 m² car-parks
Co. 507
SR -PS, SR -161, SR -264, SR -
UDC The Pearl Madena Centre Powerline The Pearl Qatar 180,000 m² car-parks
359SG, SD - 507
Alsadd Plaza Al Sadd Plaza Constreat Al Sadd Qatar 40,000 m² SR -161, SR -264, SD - 507 car-parks
SR -PS, SR -161, Sikadur 507, SR
Ministry of Defence Commercial Complex AL Habib & Co LLC Sohar Oman 10,000 m² car-parks
-264, SR -359SG
Ministry of HRD Commercial Complex Teejan Contracting Muscat Oman 3,000 m² SR -2430SG car-parks
 No. 47.12 – October 2012 Food Industry

Sika at Work

Sika Roof to Floor Solutions for Nestlé

Jebel Ali, Dubai, United Arab Emirates
Flooring: Sikafloor®
Roofing: Sikaplan®
Sika Roof to Floor Solutions for Nestlé Jebel Ali, Dubai

Project Description Project Requirements and Solutions

Nestlé opened a new factory in Dubai in December 2010. The Flooring

47,800 m2 Nestlé’s Jebel Ali factory is located at TechnoPark and The floors in the dry and wet production areas of the factory needed
serves markets across the Middle East. Nestlé’s TechnoPark facility is to meet the stringent hygiene standards of Néstle and ensure the
the first confectionery plant built by the company in a decade and is smooth operation of the factory. For the floors and walls in dry areas,
expected to be the third largest Kit Kat chocolate manufacturing plant Sikafloor ® 263 SL and Sikafloor ® 264 were applied in
worldwide. The factory manufactures and packages Nido powdered areas primed with Sikafloor®-161. The joints were sealed with
milk, Kit Kat chocolate bars and Pure Life bottled water. Sikaflex® PRO-3 WF; for the floors and covings in wet areas,
Sikafloor ® 21N PurCem ® and Sikafloor ® 29/31N
PurCem® were applied.

Roofing
The requirement was for a warm roof solution providing long term
durability under the extreme local climatic conditions. The Sika ®
roofing solution was a mechanically fastened Sikaplan ® 15G
single ply membrane incorporating Sikaplan® 18D, Sarnafast®
SB6.3 fixings, Sarnacol® 2170 adhesive, Sikaflex® AT-
Connection and Sikadur® Combiflex.
Value for the Customer

„
Local professional technical advice for roofing & flooring in the early
stages of the project with knowledge, expertise and competence in
durable systems.
„
Many years experience of working with Nestlé globally and having a
good understanding of their needs.
„
Strong customer relationships with the client and the applicator.
Team approach.
„
Strong portfolio of high-quality systems to fulfill Nestlé’s require-
ments.
„
On-site technical support.
Project Participants
Owner: Nestlé Dubai
Main Contractor: Amana Steel
Consultant: B&B Consultants
Specialist Roofing Consultant: Backad
Roofing Applicator: Western International
Flooring Applicator: Wels Co. LLC
Sika organization: Sika UAE LLC
© Sika Services AG / BU Contractors / 47.12 – October 2012 / CMS / ID: 28822

Sika Services AG Our most current General Sales

Corporate Business Unit Contractors Conditions shall apply.
Speckstrasse 22, CH-8330 Pfäffikon / Switzerland Please consult the Product Data
Phone +41 58 436 23 80 / Fax +41 58 436 23 77 Sheet prior to any use and
www.sika.com processing.
 Reference Projects for Sikafloor - 264

Project Contractor Consultant Quantity Location

Construction Al Zawra Central Power
Plant
AQUA Engineering GMBH
/ Tecton Engineering
FEWA 5,500 m2 Ajman - UAE

I Rise Tower @ Tecom Al Naboodah Khatib & Alami 90,000 m2 Dubai – UAE
3B+G+45 FLOORS
Zelan Holdings (M) SDN Arcan Project
(SIDRA TOWER) - 35,000 m2 Dubai – UAE
BHD Management Services
D.I.C.,DUBAI
Al Bandar, Al Raha Beach Al Dar Laing O'Rourke 35,000 m2 Abu Dhabi – UAE
Commercial & Residential
Building, Danet Abu Dhabi NPC Sorouh Real Estate 9,000 m2 Abu Dhabi – UAE
Plot 43
Musanada Car Parks(DOT
Kharafi National LLC 27,000 m2 Abu Dhabi – UAE
Project-5 levels)

Strata Factory-Al Ain Max Boegl Technip 6,000 m2 Al Ain – UAE

ADWEA Boot Sewerage

Kharafi National LLC ILF Consulting Engineers 7,000 m2 Abu Dhabi – UAE
Plant-Wathba Site
Bridges Package Project - Al Naboodah Contracting
KEO & ATKINS 5,000 m2 Abu Dhabi – UAE
Sowah Island Group
New Control Tower- Abu
Dhabi International Air Port Ascon-Kumho JV ADPI 9,000 m2 Abu Dhabi – UAE
(Extension)
Construction of Internal
Al Jaber Transport &
Roads in Al Shamkha, ADDC 1,800 m2 Abu Dhabi – UAE
General Contracting
Stage III

Sika UAE L.L.C./ P.O. Box 213233, Dubai, U.A.E.

Phone: +971 4 4398200/ Fax: +971 4 4393606
 Construction of
Silver Coast MLDesign 12,000 m2 Al Ain – UAE
Ammunition Stores
Construction Centro Point Hotel Shapoorji Pallonji 3,000 m2 Dubai – UAE
SHJ130-Project Phoenix
Amana Steel Buildings & Intergulf Ltd. & Emirates
at Port Khaled / Oil & 13,000 m2 Dubai – UAE
Contracting Refining Co.
Majoring products
ISTPI-Sewage Treatment
Fourth Dimension ADSSC 5,500 m2 Abu Dhabi – UAE
Boot Project
ISTPI-Sewage Treatment
Kharafi National ADSSC 14,000 m2 Abu Dhabi – UAE
Boot Project
IFFCO – Phoenix at Port
Amana Steel Building TNQ LLC 1,000 m2 Dubai – UAE
Khaled

Car park Al Shorooq Ashgal 20,000 m2 Qatar

Holiday Villa Car park Spartan/ Cre trch Taleb Group 15,000 m2 Qatar

Gas based power station Hyundai / BMC JV Ras Lafan GTL 20,000 m2 Qatar
Al Bakali Building (Mena
Tower) Basement car park, Art Line Al Bakali Co. WLL 2,000 m2 Bahrain
Al Seef
Smart Village (Bldg 2215) Beta Misr 10,000 m2 Egypt

Ministry of internal Affairs Beta Misr 15,000 m2 Egypt

Sika UAE L.L.C./ P.O. Box 213233, Dubai, U.A.E.

Phone: +971 4 4398200/ Fax: +971 4 4393606 2/3
 ElSalab Beta Misr 1,000 m2 Egypt
Construction Workshop ALFanar 12,000 m2 Saudi Arabia

Underground Car Park Enka 90,000 m2 Moscow - Russia

Huizhou Daya Bay Feida

Production Area ᝴ᕞගுᘓ⟃ᮦᩱ᭷㝈බྖ 15,000 m2 China
Knitting Co.
Shanghai Wicon ୖᾏጾඞ
Production Area Bosch Suzhou 剷ⶆ⌂ᶾ 1,500 m2 China
ከ
Yaozhong Square
Parking Lot Guangzhou Xinhui 15,000 m2 China
Parking Lot

Car-Park Xiamen Hongshuo ན斐⚥旭Ể孖ᷕ⽫ 17,000 m2 China

Sika UAE L.L.C./ P.O. Box 213233, Dubai, U.A.E.

Phone: +971 4 4398200/ Fax: +971 4 4393606 3/3
 LICENSES &
CERTIFICATES
 ‫رخصة صناعية‬
Industrial License
License Details / ‫تفاصيل الرخصة‬
License No. 613239 ‫رقم الرخصة‬

)‫م‬.‫م‬.‫ذ‬.‫م)(ش‬.‫ع‬.‫سيكا (ا‬ ‫اسم الشركة‬

Company Name SIKA )U.A.E( )L.L.C(
)‫م‬.‫م‬.‫ذ‬.‫م)(ش‬.‫ع‬.‫سيكا (ا‬ ‫السم التجارى‬
Trade Name SIKA )U.A.E( )L.L.C(

Legal Type Limited Liability Company - Single Owner)LLC - SO( ).‫م‬.‫م‬.‫ الشخص الواحد (ذ‬- ‫شركة ذات مسؤولية محدودة‬ ‫الشكل القانونى‬
Expiry Date 30/06/2023 ‫تاريخ النتهاء‬ Issue Date 01/07/2008 ‫تاريخ الصدار‬

D&B D-U-N-S ® 851141197 ‫الرقم العالمي‬ Main License No. 613239 ‫رقم الرخصة الم‬
No.
Register No. 1730864 ‫رقم السجل التجارى‬ DCCI No. 143330 ‫عضوية الغرفة‬

License Members / ‫الطراف‬

Share / ‫الحصص‬ Role / ‫الصفة‬ Nationality / ‫الجنسية‬ Name / ‫السم‬ No./‫رقم الشخص‬

100.00% Shares Owner / ‫مالك‬ Bahrain / ‫البحرين‬ ‫م‬.‫م‬.‫شركة سيكا العربية القابضة ذ‬ 383982
‫حصص‬
SIKA ARABIA HOLDING COMPANY
W.L.L
Manager / ‫مدير‬ Egypt / ‫مصر‬ ‫جوزيف نبيه خله اسرائيل‬ 726387
JOSEPH NABIH KHELA ISRAEL
Manager / ‫مدير‬ India / ‫الهند‬ ‫شيتانكومار منشالل سولنكى منشالل سامرات سولنكى‬ 677234
CHETANKUMAR MANCHHALAL
SOLANKI MANCHHALAL SAMRATH
SOLANKI

License Activities / ‫نشاط الرخصة التجارية‬

Basic Industrial Chemicals Trading ‫تجارة الكيماويات الصناعية الساسية‬
Construction Chemicals Manufacturing ‫صناعة المواد الكيماوية لغراض البناء‬
Construction Chemicals Trading ‫تجارة المواد الكيماوية لغراض البناء‬
Gum & Glue Trading ‫تجارة الصمغ والغراء‬
Fire Resistant & Retardant Materials Manufacturing ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
Adhesives Manufacturing ‫صناعة مواد اللصق‬
Adhesives Trading ‫تجارة المواد اللصقة‬
Export ‫تصدير‬
Acid Manufacturing ‫صناعة الحماض الكيماوية‬
Import ‫إستيراد‬
Print Date 20/09/2022 11:49 ‫تاريخ الطباعة‬ Receipt No. 14585632 ‫رقم اليصال‬
‫اتصالت) للحصول‬/‫ (دو‬6969 ‫ أرسل رقم الرخصة إلى‬،‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‬
.‫على اذن الدفع‬ Get FREE access to
Zoho One for the first
Now you can renew your trade license by sending a text message )SMS(. Send your trade year
license number to 6969 )Du/ Etisalat( to receive payment voucher. . ‫احصل على زوهو ون مجانا‬
‫للسنة الولى‬
Zoho.com/det

‫لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬. ‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي‬
this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to
Verify the certificate
 ‫العنوان ‪Address /‬‬
‫‪Phone No‬‬ ‫‪971-04-4398200‬‬ ‫تليفون‬ ‫‪P.O. Box‬‬ ‫‪126212‬‬ ‫صندوق بريد‬
‫‪Fax No‬‬ ‫‪971-4-3250966‬‬ ‫فاكس‬ ‫‪Parcel ID‬‬ ‫‪533-279‬‬ ‫رقم القطعة‬
‫‪Mobile No‬‬ ‫‪971-55-7251725‬‬ ‫هاتف متحرك‬ ‫البريد اللكتروني ‪Email /‬‬

‫مستودع )‪ (1‬ملك سيكا )ا‪.‬ع‪.‬م()ش‪.‬ذ‪.‬م‪.‬م( سيح شعيب‬

‫الملحظات ‪Remarks /‬‬

‫تم زيادة راس المال في ‪18/10/2011‬‬
‫تم تغيير المدير بتاريخ ‪14/12/2017‬‬
‫تم اضافة مدير في ‪14/8/2018‬‬
‫تم إضافة نشاط في ‪13/11/2018‬‬

‫‪Print Date‬‬ ‫‪20/09/2022‬‬ ‫‪11:49‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪14585632‬‬ ‫رقم اليصال‬
‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‪ ،‬أرسل رقم الرخصة إلى ‪( 6969‬دو‪/‬اتصالت) للحصول‬
‫على اذن الدفع‪.‬‬ ‫‪Get FREE access to‬‬
‫‪Zoho One for the first‬‬
‫‪Now you can renew your trade license by sending a text message )SMS(. Send your trade‬‬ ‫‪year‬‬
‫‪license number to 6969 )Du/ Etisalat( to receive payment voucher.‬‬ ‫احصل على زوهو ون مجانا ‪.‬‬
‫للسنة الولى‬
‫‪Zoho.com/det‬‬

‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي ‪.‬لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬
‫‪this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to‬‬
‫‪Verify the certificate‬‬
 ‫شهادة شهر قيد شركة فى السجل التجارى‬
‫‪Commercial Register‬‬
‫تفاصيل القــيد ‪Register Details /‬‬
‫‪Main Lice. Nr‬‬ ‫‪613239‬‬ ‫‪ Register No.‬رقم الرخصة الم‬ ‫‪1730864‬‬ ‫رقم القيد‬

‫‪Company‬‬ ‫سيكا (ا‪.‬ع‪.‬م)(ش‪.‬ذ‪.‬م‪.‬م)‬

‫‪Name‬‬ ‫(‪SIKA )U.A.E( )L.L.C‬‬
‫‪Legal Type‬‬ ‫شركة ذات مسؤولية محدودة ‪ -‬الشخص الواحد (ذ‪.‬م‪Limited Liability Company - Single Owner)LLC .‬‬ ‫الشكل القانونى‬
‫(‪- SO‬‬ ‫م‪).‬‬
‫‪Expiry Date‬‬ ‫‪30/06/2023‬‬ ‫‪ Reg. Date‬تاريخ النتهاء‬ ‫‪01/07/2008‬‬ ‫تاريخ الصدار‬
‫‪D&B D-U-N-S‬‬ ‫®‬ ‫الرقم العالمي‬
‫‪No.‬‬ ‫‪851141197‬‬

‫تفاصيل راس المال ‪Capital Details /‬‬

‫‪Nominated‬‬ ‫‪-1.0000‬‬ ‫السمى‬
‫‪Paid‬‬ ‫‪1,000,000.0000‬‬ ‫المدفوع‬
‫‪No. of Shares‬‬ ‫‪1,000.0000‬‬ ‫عدد السهم‬
‫‪Currency‬‬ ‫‪UAE Dirhams‬‬ ‫درهم اماراتي‬ ‫العملة‬

‫عنوان الرخصة ‪License Address /‬‬

‫مستودع )‪ (1‬ملك سيكا )ا‪.‬ع‪.‬م()ش‪.‬ذ‪.‬م‪.‬م( سيح شعيب‬

‫عنوان السجل التجاري ‪Commerce Address /‬‬

‫مستودع (‪ )1‬ملك سيكا (ا‪.‬ع‪.‬م)(ش‪.‬ذ‪.‬م‪.‬م) سيح شعيب‬

‫أنشطة السجل ‪Register Activities /‬‬
‫‪Import‬‬ ‫إستيراد‬
‫‪Export‬‬ ‫تصدير‬
‫‪Acid Manufacturing‬‬ ‫صناعة الحماض الكيماوية‬
‫‪Adhesives Manufacturing‬‬ ‫صناعة مواد اللصق‬
‫‪Construction Chemicals Manufacturing‬‬ ‫صناعة المواد الكيماوية لغراض البناء‬
‫‪Fire Resistant & Retardant Materials Manufacturing‬‬ ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
‫‪Adhesives Trading‬‬ ‫تجارة المواد اللصقة‬
‫‪Gum & Glue Trading‬‬ ‫تجارة الصمغ والغراء‬
‫‪Basic Industrial Chemicals Trading‬‬ ‫تجارة الكيماويات الصناعية الساسية‬
‫‪Construction Chemicals Trading‬‬ ‫تجارة المواد الكيماوية لغراض البناء‬

‫‪Print Date‬‬ ‫‪20/09/2022‬‬ ‫‪11:49‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪14585632‬‬ ‫رقم اليصال‬
‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‪ ،‬أرسل رقم الرخصة إلى ‪( 6969‬دو‪/‬اتصالت) للحصول‬
‫على اذن الدفع‪.‬‬ ‫‪Get FREE access to‬‬
‫‪Zoho One for the first‬‬
‫‪Now you can renew your trade license by sending a text message )SMS(. Send your trade‬‬ ‫‪year‬‬
‫‪license number to 6969 )Du/ Etisalat( to receive payment voucher.‬‬ ‫احصل على زوهو ون مجانا ‪.‬‬
‫للسنة الولى‬
‫‪Zoho.com/det‬‬

‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي ‪.‬لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬
‫‪this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to‬‬
‫‪Verify the certificate‬‬
 Current issue date: 16 August 2021 Original approval(s):
Expiry date: 15 August 2024 ISO 14001 - 16 August 2012
Certificate identity number: 10384915 ISO 9001 - 16 August 2012
ISO 45001 - 9 September 2020

Certificate of Approval
This is to certify that the Management System of:

Sika UAE LLC

Plot 61 (533-279), Dubai Industrial City (DIC), Saih Shuaib 4 (533), P.O. Box 126212, Dubai,
United Arab Emirates

has been approved by Lloyd's Register to the following standards:

ISO 14001:2015, ISO 9001:2015, ISO 45001:2018

Approval number(s): ISO 14001 – 0045885-002, ISO 9001 – 0045886-002, ISO 45001 – 0045887-009

This certificate forms part of the approval identified by approval number: 0045885/ 0045886/ 0045887

The scope of this approval is applicable to:

ISO 14001:2015,ISO 9001:2015,ISO 45001:2018

Development, Manufacture and Supply of Construction and Industry Chemicals.

Luis Cunha
Area Operations Manager - SAMEA

Issued by: Lloyd's Register Quality Assurance Limited

Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance Limited, Dubai, Festival Office Tower, Suite 2001, Dubai Festival City, Dubai for and on behalf of: Lloyd's Register Quality
Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
 Current issue date: 16 August 2021 Original approval(s):
Expiry date: 15 August 2024 ISO 14001 - 16 August 2012
Certificate identity number: 10384910 ISO 9001 - 16 August 2012
ISO 45001 - 9 September 2020

Certificate of Approval
This is to certify that the Management System of:

Sika International Chemicals LLC

Office 1010 - T2 GATE 1002 - MAZYAD MALL/TOWER 2, Mohammed Bin Zayed AZ, Abu Dhabi, United Arab
Emirates

has been approved by Lloyd's Register to the following standards:

ISO 14001:2015, ISO 9001:2015, ISO 45001:2018

Approval number(s): ISO 14001 – 0045885-003, ISO 9001 – 0045886-003, ISO 45001 – 0045887-010

This certificate forms part of the approval identified by approval number: 0045885/ 0045886/ 0045887

The scope of this approval is applicable to:

ISO 14001:2015,ISO 9001:2015,ISO 45001:2018

Sales, Marketing and Technical Support for Sika Products

Luis Cunha
Area Operations Manager - SAMEA

Issued by: Lloyd's Register Quality Assurance Limited

Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance Limited, Dubai, Festival Office Tower, Suite 2001, Dubai Festival City, Dubai for and on behalf of: Lloyd's Register Quality
Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
License no. 613239 613239 ‫رقم الرخصة‬

Membership no. 143330 143330 ‫رقم العضوية‬

Registration no. 1730864 1730864 ‫رقم السجل التجاري‬

Trade Name SIKA (U.A.E) (L.L.C) (‫م‬.‫م‬.‫ذ‬.‫م()ش‬.‫ع‬.‫سيكا )ا‬ ‫السم التجاري‬

Legal Status Limited Liability Company - Sing ‫ الشخص‬- ‫شركة ذات مسؤولية محدودة‬ ‫الشكل القانوني‬

Activity Construction Chemicals ‫صناعة المواد الكيماوية لغراض البناء‬ ‫نوع النشاط‬
Manufacturing ‫تجارة الكيماويات الصناعية الساسية‬
Basic Industrial Chemicals Trading ‫صناعة مواد اللصق‬
Adhesives Manufacturing ‫تجارة الصمغ والغراء‬
Gum & Glue Trading ‫تجارة المواد الكيماوية لغراض البناء‬
Construction Chemicals Trading ‫صناعة المواد المقاومة والمانعة لنتشار‬
Fire Resistant & Retardant ‫الحريق‬
Materials Manufacturing ‫تجارة المواد اللصقة‬
Adhesives Trading ‫إستيراد‬
Import ‫تصدير‬
Export ‫صناعة الحماض الكيماوية‬
Acid Manufacturing

Member Since 01/07/2008 01/07/2008 ‫تاريخ النتساب‬

Date of Issue 01/07/2008 01/07/2008 ‫تاريخ الصدار‬

Expiry Date 30/06/2023 30/06/2023 ‫تاريخ النتهاء‬

 ‫اﻟﻤﺮﺟﻊ ‪DM092020-584196:‬‬ ‫اﻟﺘﺎ‪‬ﻳﺦ ‪28/09/2020:‬‬

‫اﻟﻤﺤﺘﺮﻣﻴﻦ‬ ‫اﻟﺴﺎدة ‪ /‬ﺷﺮﻛﺔ ﺳﻴﻜﺎ )ا‪.‬ع‪.‬م()ش‪.‬ذ‪.‬م‪.‬م(‬

‫ص‪.‬ب‪126212 /.‬‬
‫د‪-‬اﻹﻣﺎرات اﻟﻌ‪‬ﺑﻴﺔ اﻟﻤﺘﺤﺪة‬
‫ﺗﺤﻴﺔ ﻃﻴﺒﺔ وﺑﻌﺪ‪،‬‬

‫اﻟﻤﻮﺿﻮع‪ :‬ﺗﺠﺪﻳﺪ اﻋﺘﻤﺎد ﺷﺮﻛﺔ ﺳﻴﻜﺎ )ا‪.‬ع‪.‬م()ش‪.‬ذ‪.‬م‪.‬م(‬

‫)‪SIKA (U.A.E) (L.L.C‬‬
‫ﻛﻤﻮرد ﻟﻠﻤﻮاد اﻟﻌﺎزﻟﺔ واﻹﻳﺒﻮﻛﺴﻴﺎت وﻣﻮاﻧﻊ اﻟﺘﺴﺮب‬
‫رﻗﻢ اﻟﻤﺮﺟﻊ‪PQ20200052 :‬‬

‫ً‬
‫ﺑﺪاﻳﺔ أﻃﻴﺐ اﻟﺘﺤﻴﺎت‪ ،‬وﺑﺎﻹﺷﺎرة إ‪ ‬اﻟﻤﻮﺿﻮع اﻟﻤﺬﻛﻮر أﻋﻼه‪،‬‬ ‫ﻧﻬﺪﻳﻜﻢ‬
‫ﻧﻔﻴﺪﻛﻢ ﺑﺄﻧﻪ ﻻ ﻣﺎﻧﻊ ﻟﺪﻳﻨﺎ ﻣﻦ ﺗﺠﺪﻳﺪ اﻋﺘﻤﺎد ﺷﺮﻛﺘﻜﻢ ﺳﻴﻜﺎ )ا‪.‬ع‪.‬م()ش‪.‬ذ‪.‬م‪.‬م( “‪ ”SIKA‬ﻛﻤﻮرد‬
‫ﻟﻠﻤﻮاد اﻟﻌﺎزﻟﺔ واﻹﻳﺒﻮﻛﺴﻴﺎت وﻣﻮاﻧﻊ اﻟﺘﺴﺮب اﻟﻤﻨﺘﺠﺔ ﻣﻦ ﻣﺼﺎﻧﻌﻜﻢ ‪ ‬إﻣﺎرة د‪ – ‬ﻣﺠﻤﻊ د‪‬‬
‫ﻟﻼﺳﺘﺜﻤﺎر وذﻟﻚ ‪ ‬ﻣﺸﺎ‪‬ﻳﻊ اﻟﺼﺮف اﻟﺼﺤﻲ ﻋﻠﻰ أن ﺗﻜﻮن ﻣﺘﻮاﻓﻘﺔ ﻣﻊ ﻣﻮاﺻﻔﺎت وﻣﺘﻄﻠﺒﺎت‬
‫ﺑﻠﺪﻳﺔ د‪ ‬وﺣﺴﺐ اﻻﺣﺘﻴﺎﺟﺎت اﻟﻔﻨﻴﺔ ﻟﻠﻤﺸﺎ‪‬ﻳﻊ ﻋﻠﻤﺎ ً ﺑﺄن ﻫﺬه اﻟﻤﻮاﻓﻘﺔ ﺳﺘﻜﻮن ﺳﺎ‪‬ﻳﺔ ﻟﻤﺪة ﻋﺎﻣﻴﻦ‬
‫ﻓﻘﻂ ﻗﺎﺑﻠﺔ ﻟﻠﺘﺠﺪﻳﺪ ‪ ‬ﺣﺎل اﺳﺘﻴﻔﺎء ﻛﻞ اﻟﺸﺮﻮط اﻟﻤﻄﻠﻮﺑﺔ‪.‬‬

‫وﺗﻔﻀﻠﻮا ﺑﻘﺒﻮل ﻓﺎﺋﻖ اﻻﺣﺘﺮام واﻟﺘﻘﺪﻳﺮ‪،‬‬

‫م‪ /‬ﻓﻬﺪ أﺣﻤﺪ ﺳﻌﻴﺪ‬

‫ﻣﺪﻳﺮ إدارة ﻣﺸﺎ‪‬ﻳﻊ اﻟﺼﺮف اﻟﺼﺤﻲ‬

‫ﻧﺴﺨﺔ إ‪:‬‬

‫ﻣﻜﺘﺐ اﻟﺪﻋﻢ اﻟﻔﻨﻲ‬