2 BHK GOOD CATEGORY BOQ
Date - 15-04-2025
INTERIOR WORKS
Sl.No Description Qty Rate Amount
A CIVIL DISMANTLING WORK
Dismantling of existing aluminium/wooden partitions,Ac ducts, Electrical items, plumbing items,FAS items, furniture with removal &
1
clearing of debris from site. Ls 1
Dismantling of existing brick wall, Partation, tiles screeding & tile flooring etc.,with removal & clearing of debris from site.
2
sqft Rate Only
B PARTITION WORK
1 75 mm PARTITION - Type 1 ( GI Frame with both side gypsum skinning )
Providing and fixing of gyp board Full Height Partitions Up to True Ceiling height using 50 x 25mm GI section
framework @ 600 c/c both ways with horizontal member at floor and soffit, proper in line and level, screw fixed to
section with 25mm long dry wall screws. The frame both side Skinned with 12 mm gyp board up to 2100 ht and above
that Up to true ceiling with gypsum plaster board to seal the Services gap in between partition and the A.C duct,
electrical, sprinkler etc., wherever required in above false ceiling partition. Provide the return air path way as per
architect approval. Also provide the holes/ reinforcement in frame for electrical/network conduit as per requirement.
sqft 15
i As same as above spec (considered Partition Above false ceiling). Without Paint Finish. sqft 10
ii extra for hollow core to be filled with 50mm thick and 32Kg/cubic meter Rock wool for sound insulation. sqft Rate Only
Providing and fixing full height 12mm toughened glass fixed with Aluminium U-channel on the top above false ceiling
and at the bottom at floor level and all gaps to be sealed with necessary sealant(GE make )and In-between glass and
solid partition should have 35x20mm beech wood beading with Melamine polish as per the details mentioned in the
ii
drawing. Number of vertical joints shall be as per the drawing only. The partition to have support above false ceiling
made from 50 x 50 mm wooden sections , 32 kg Density Rockwool Insulation and 12.5 mm Gypsum boards on both
sides of the frame. The measured quantity shall be area of the glass only. sqft 10
C PANELLING & BOXING WORK
10 Laminate panelling
1 Wooden rafters / Fins
Providing and fixing of 200mm x 100mm Ply boxing to be made with 19mm plywood finished with 1mm thick laminate
of approved make and shade as per design and architect approval.
rft Rate Only
2 Lacquered glass panelling
Supply and fixing of 6mm thick Lacquered glass fixed on the 12 ply panelling by 19mm SS studs/pasted with Silicon as
per approved drawing. sqft 4
D DOORS & SHUTTERS
Shutter work
Date - 15-04-2025
INTERIOR WORKS
Sl.No Description Qty Rate Amount
Providing and Fixing shutters for DB panels made from 25mm Plywood and finished in 1mm laminate of approved make
& shade. All exposed edges should be concealed with 12mm wooden lipping and polished IN MELAMINE MATT FINISH.
1 Openable shutters to be provided with all necessary hardware such as, S.S. Clip-on Auto close Hinges, opens up to 90 to
180 degrees as the case may be , S.S. Handle, Lock of approved make & finish, etc., all inside surfaces to be polished.
sqft 10
2 P & f of Tuffand glazed Door including patch Fittings of Dorma & Ozone.
i Size 2100x1200 Nos 1
ii Size 900x2100 Nos Rate only
E Loose Furniture
1 SOFA SET - Customized
Providing & Fixing of Reception table of size 1800mm length and 675mm, made of 25mm plywood with 1.5mm
laminate finish of approved make on all visible surfaces and 0.5mm laminate for under surface of table. All interior
vertical faces to be in laminate, Provision of cable management as per drawing with flip tops resting.(design as per
architect drawing). Nos 1
G STORAGES
CONSOLE
Supply and fixing of pantry and kitchen Storages with ply storage base made from 19mm Hdf/Ply and finished in 1mm
laminate of approved make & shade. All exposed edges should be concealed with 6mm Teak wood lipping/25x18mm
1 Pvc beeding and polished. Openable shutters to be provided with all necessary hardware such as, S.S. Clip-on Auto
close Hinges, S.S. Handle, Lock of approved make & finish, Tower Bolt, etc., all inside surfaces to be laminated with
Balancing Laminate. sqft 2
H FALSE CEILING
1 Acoustical Ceiling Grid Systems
Supplying and fixing of Mineral fibre tile with suspension system, fire rating of 1 hr, with following Specs Grid - 25mm
tile fine Fissure of Armstrong or equivalent ( 15mm thk). Tegular Edge. sqft 1
2 Gypsum Ceiling
Providing and fixing in position multi level GYPSUM board false-ceiling suspended on G.I. frame work as per design & as
shown in the drawing. The G.I. frame work consists of Perimeter channel of size 27mm x 0.5mm. Intermediate channel
of size 45mm x 0.5mm thick. Ceiling section of 0.5mm thickness. 12.5mm thick tapered edge gypsum plaster board
fixed to ceiling channel with 25mm dry wall screws at 230mm centres Jointed and finished with requisite filler, paper
tape, finisher and primer suitable for Gypsum plaster boards & finishing the same with 3 coats of acrylic emulsion paint
as/app. Rate to include making necessary cut-outs/openings for light fittings, diffusers etc. All components to be of
India Gypsum & all spacing’s should match their recommendation & standards. sqft 1
I FLOORING
I Carpet Flooring
Date - 15-04-2025
INTERIOR WORKS
Sl.No Description Qty Rate Amount
Providing Imported nylon 6.6 approved make and colour shade 100% Optimum Solution Dyed / Wear On Nylon Tufted,
Textured Loop/cut Pile Carpet tiles (Modular Carpet) of approved size or equivalent The Carpet tiles shall be Permanent
static control, Pile height to a maximum of machine Gauge-1/12 Gauge, Total thickness 6mm+/-0.5mm, Density-Over
6500 Oz/Cu Yd, with synthetic non-woven, backing of tile as approved by client , PVC free underscore cushion including
color fastness as per standard, moth proof, stain resistant, anti microbial, fire -resisting class 1 etc. complete, laying over
existing flooring as per manufacturer's specification and the product shall be in compliance to ASTM standards. The
quoted rate shall be all inclusive of transportation, loading, unloading etc at site and wastage etc; (Quantity is inclusive
of attic stock of 5% on the required quantity and attic stock shall be handed over to client in full packing condition)
Actual laid area and attic stock will be measured and paid.
Preparing the surface like deep cleaning of floor and removing of loose particle and Laying of Carpet tiles including
necessary pre-applied or post applied adhesives . basic cost Rs.150 per sft.
sqft 1
11 Supply and laying of 1.6 mm Vinyl roll Flooring , complete with cleaning and preparation of base and including
installation with adhesive, surface protection till handover of site. L.G MAKE . sqft 1
J Painting :-
1 POP of average 12mm thickness for walls in true level and plumb complete as per architects instructions.
sqft 1
Providing & applying Premium emulsion paint to walls after preparation of surface with necessary primer, two coats of
2 luppam (Altech or eq.) to get smooth finish and two coats of paint and final roller coat to get Satin finish in approved
shade. sqft 1
Texture paint of approved make & type with necessary base preparation including emulsion paint of approved colour
3
and finish. Base rate Rs45/sft sqft Rate only
4 wall paper covering with approved Adhesive on prefinished surface(basic rate 120 per sft) sqft Rate only
5 P & A of Laquire Wooden Polish sqft 1
K Miscellaneous
1 Skirting
Providing & Fixing of 75mm high skirting of extruded Aluminium profile. Make: wall line / equivalent.
2 Pelmet
Pelmet in L shaped of 150mm x 300mm (for Blinds and pull down screen) all along external windows fabricated with
12mm commercial plywood & finished in .8mm thick Laminate in visible area and other area covered with paint as per
approval shade and make. rmt 4
Total Amount
