KIPL
INNOVATIVE IISUSTAINABLE II DEPENDABLE
TECHNICAL SYNOPSIS
KIPOFIX RFI
Dye fixing Agent to Improve Rubbing Fastness
KIPL
INNOVATIVE IISUSTAINABLE II DEPENDABLE
Uses
Formaldehyde free dye fixing agent to improve crocking fatness of cellulosics dyed with reactive dyes.
Characteristics Benefits
• Improves rubbing fastness Meets buyers’ protocol
• Formaldehyde free Meets ecological requirements
• Minimal impairment of light fastness Ensures right quality of end product
Minimal effect on shade and handle of fabric Ensures no rejection due to these changes
PROPERTIES
1. Chemical Constitution polyurethane compound
2. Ionic Character Cationic
3. Physical form Yellow viscous liquid
4. pH (25 oC,1.0% Sol) 3-5
5. Sp. Gravity at 20 oC Approx.1
6. Solubility Easily soluble in water
7. Storage Stabilty Product should not be stored at temperatures above 40°C. Stable for
12 months at 0-40OC in closed containers.
8. Ecology/Toxicology The usual safety and hygiene and safety rules should be observed in
storage, handling and use.
KIPL
INNOVATIVE IISUSTAINABLE II DEPENDABLE
Application
Dissolving/diluting
KIPOFIX RFI can be diluted in all proportions by pouring on cold water. Stock solutions are stable
for prolonged periods.
Required amount
The best effects are obtained by applying KIPOFIX RFI as follows:
Adequate cleaning of equipment before KIPOFIX RFI finishing is necessary to avoid the impact which may be raised
from the residual alkali on the textiles.
Pad application
KIPOFIX RFI 10-30gpl
pH 4-5
Pick Up 70-80%
Padding at room temperature → Dry (80-100°C) →Curing (160-180°C, 45-60sec)
KIPL
INNOVATIVE IISUSTAINABLE II DEPENDABLE
Attention
Our technical data sheets provide directions for the application possibilities of our products. Any influence on dyes, prints
and their fastness properties, degree of whiteness, fabric properties, handle, non-slip, seam resistance and material
strength, ageing resistance, odour of finished fabric etc. are under the user’s own responsibility. Due to the many
different textile variations we are not able to submit a general recommendation. Our recommendations are in line with
our present state of knowledge and do not provide any guarantee. Therefore initial internal bulk trials are absolutely
necessary and are at user's sole responsibility. The manufacturer is not liable for damages due to improper application or
application against our explicit recommendations.
Statutory provisions and standard regulations must be observed when handling processing agents. For additional
detailed information please refer to the product specific safety data sheet.
Contact
KIPL
Plot no 322
Phase 2, Industrial Area
Chandigarh - 160002
Edition 2019
Copyright © 2019KIPL. All rights reserved.
All product names in capital letters are either registered or pending trademarks and property of KIPL.
IMPORTANT: The following supersedes Buyer’s documents. SELLER MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No statements herein are to be construed as inducements to infringe any relevant patent. Under no circumstances
shall Seller be liable for incidental, consequential or indirect damages for alleged negligence breach of warranty, strict liability, tort or contract arising in connection with the product(s).
Buyer’s sole remedy and Seller’s sole liability for any claims shall be Buyer’s purchase price. Data and results are based on controlled or lab work and must be confirmed by Buyer by
testing for its intended conditions of use. The product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes,
abraded skin, or blood is intended; or for uses for which implantation within the human body is intended. Printed in India.
