© 1/2008,

Catalog 2008 V.1

Bushmaster Firearms
International LLC,
Windham Maine

Telephone Orders 24 Hours: 1-800-998-7928

Fax Orders: 1-207-892-8068
Customer Service: 1-800-883-6229

Bushmaster’s
30th Anniversary
Carbine - See
inside front cover

Bushmaster BA50 Rifle

.50BMG Caliber
See Page 2

FOR HUNTING / FOR COMPETITION

FOR LAW ENFORCEMENT / MILITARY
FOR SECURITY & HOME DEFENSE
BUSHMASTER 30TH ANNIVERSARY CARBINE…
Thirty years of AR type rifle innovation combined to
create a unique Bushmaster Carbine!
Available at your FFL Dealer soon…
M.S.R.P. $1599.95
(BCWA3F 16FD-XXX)

A special Carbine featuring

years of Bushmaster innovation
from Muzzle Brake to Buttstock – including…
• AK47 Flash Hider – Developed from a Russian design
and first manufactured in .223 caliber in the mid ‘80s
• 16” Dissipator Heavy Fluted Barrel – a design unique
to Bushmaster (though copied since). First shipped in
the early 90’s, this Chrome Lined ChroMoly steel barrel
features “full radius” front sight placement in combination with a rear (Dissipator) positioned gas block for ultra
reliability • Milled Gas Block – allowing placement under the handguards. This “shaved sight base” concept was also
utilized on our first competition/varmint rifle – the V Match • A1 “Round” Front Sight Post – adapted from the Viet
Nam era M16A1s, and still popular today • Four Rail Split Handguard – first introduced in 2004, featuring Four
Picatinny Rails positioned at 12-3-6-9 o’clock, multiple cooling vents, and easy installation into existing Delta Ring
and Handguard Cap. Rubber rail covers for comfort and rail protection are included • A3 Removable Carry Handle on
“Flat-top” Upper – introduced to Bushmaster customers in 1995 to offer a solid optic mounting platform on the
Upper while retaining Carry Handle convenience (A3 Carry Handle introduced in ‘96) • “Stay-Straight” A3 Rear Sight
from our 2007 DCM-XR Series Rifles with 1/4 Minute Windage Knob • Carbon 15 Charging Handle and Ambidextrous
Safety Selector – from our acquisition of Arizona’s Professional Ordnance in 2003 • 6-Position Telestock – a Bushmas-
ter LE and Military standard since 2000 • Also included: ErgoGrip Tactical Pistol Grip; Nickel Plated Pivot/Takedown
Pins; BMAS Sling Swivel Stud with Q.D. Sling Swivels; Laser Engraved Bushmaster 30th Anniversary Logo on
Magazine Well; 30 Rd. Magazine; Black Web Sling, Safety Block, Manual – all shipped in a lockable hard case.

BUSHMASTER GAS PISTON RETROFIT CONVERSION KIT… (GP-GSR) $399.95

Now you can easily retrofit your AR15 / M4 Type Carbine to
add the reliability, ease of maintenance, cooler running, and
consistent function of the Gas Piston Operating System that has for
years been so successfully used on AKs / FALs, and others.
The Bushmaster Gas-Piston Retrofit Conversion Kit is a Patent
Pending, short stroke piston conversion system that includes all M4 Type Handguards with Heatshields
the necessary parts to convert your gas impingement type
carbine. Once installed, there are no more broken gas rings,
droopy gas tubes or hot gases vented into the Receivers of
your weapon. Instead, gases are vented under the hand Carrier, Piston and Piston Housing
guard, and away from the operator. The high performance Housing Piston
Bolt Carrier features increased mass, an integral impact lug Support Operating Rod with Spring and Upper Receiver Guide Sleeve
and specially designed anti-wear features to protect your
receiver. The Bushmaster Gas-Piston Retrofit Conversion Kit is Bolt Carrier with Striker Face
readily installed into your factory Upper Receiver Assembly
without permanent modifications to your carbine. You keep
your factory receivers, barrel and bolt. The result is a cleaner
and more reliable system sure to enhance the overall Bushmaster Gas Piston Retro-fit
performance and reliability of your weapon. Conversion Kit Components
Reliability proven in a 10,000 Round non-stop endurance test!

Upper Handguard half removed See Details

to show Conversion Kit components. on Page 77
 Table of Contents:
Bushmaster Rifles 1
Coming in ‘08… Bushmaster Multi-Caliber Rifles! Bushmaster Carbines 8
2007 has been a year of great change and growth at Bushmaster. Law Enforcement Only Models 12
Our new .450 Bushmaster has been well received by hunters for its
unmatched stopping power, and Law Enforcement Departments are Bushmaster Carbon 15 Models 13
realizing it’s potential for crime deterence and auto glass penetration. Our
®
Varminter and Predator models, now available in RealTree Camouflage Bushmaster Receivers & Parts 15
Finish, continue to be the go-to gun for the prairie dog, woodchuck and Upper Receiver/Barrel Assemblies 22
coyote hunters.
Bushmaster’s acquisition of Georgia’s Cobb Manufacturing, which Bushmaster Barrels 27
has now become Bushmaster’s R&D facility, brought us the big new .50
BMG caliber Bushmaster BA50 (featured on the cover). In 2008, Muzzle Brakes & Flash Suppressors 31
Bushmaster will bring to market an exciting line of Multi-Caliber Rifles
originally developed by the Cobb design team. In 2008 we’ll celebrate
Magazines & Accessories 33
th th
our 30 Anniversary by offering the unique 30 Anniversary Carbine Slings & Bipods 37
which includes parts and accessories representative of our 30 years of
firearms innovation and development. Parts Reference Schematic 40
The past year was big for Bushmaster Highpower Competition Order Forms / Exchanges / Warranty, etc. 42
with the inaugural Bushmaster Cup at Camp Perry and other
Bushmaster sponsored matches. Our Bushmaster Juniors shot well this Pistol Grips & Buttstocks 45
year – Team Bushmaster member Amanda Elsenboss from Woodbury,
CT won the Top Junior Bushmaster Cup. Competition, sponsorship and Handguards & Accessories 50
support in 2008 will be even bigger!
With new Bushmaster Rifles and Carbines, a new Gas Piston
Gunsmithing Tools & Supplies 55
Conversion Kit, new products from Creedmoor, Competition Parts & Accessories 61
Leupold, MeproLight, Command Arms and
more, 2008 will be a great year for our Sights, Scopes & Mounts 66
customers the world over. In our 30th Year,
Bushmaster pledges to continue to be… Bushmaster Accessories & Apparel 77
The Best. By a Long Shot! Bushmaster Gift Certificates 81
Junior High Power Competitors… See the special $800 Juniors
Only Coupon pricing offer on Bushmaster DCM-XR Competition Rifles! Available
only on our website – and available only to qualifying Junior Competitors.

Bushmaster
DCM-XR A3
Competition Rifle

BUSHMASTER…
On the Internet at: Member - National Defense
Member - National
Member - Sportsman’s Association of Sporting
Industrial Association Member - National
[Link] Shooting Sports Foundation Alliance of Maine Goods Wholesalers

Major Credit Cards Accepted

 30 YEARS OF
BUILDING GREAT AMERICAN RIFLES.
NEW! Bushmaster BA50
.50 BMG Caliber Bolt Action Rifle
…a highly accurate, long distance target rifle for those • Operation:
who want to shoot the ultimate rifle on the range. Bolt Action (bolt on
left side of receiver)
Actual Size • Rifling: 1 turn in 15 inches
.50 BMG
(Browning Machine Gun)
• Shipped with two
Cartridge 10 Round Magazines
• MIL-STD-1913 Rail at
BA50 Rifle 12 o’clock position
30” Barrel on Vented Forend
• Steel Bipod with
Folding Legs
• ErgoGrip Deluxe Tactical Pistol Grip • Hard Case
• Magpul PRS Adjustable Buttstock with LimbSaver ButtPad
• Disassembles like an AR type rifle for cleaning
• Lower Receiver is machined from T6-6061 Aluminum billet
• Upper is machined from a T6-6061 extrusion with MIL-STD-1913 Rail
• Manganese Phosphate finish on steel parts
• Hard Anodized black finish on aluminum parts (Mil-Spec)
Sold only through • Bushmaster Barrel is Free Floated within Vented Forend
your FFL Dealer • High Efficiency Recoil Reducing Brake (Similar to a .243 hunting rifle)
• 1 M.o.A. Accuracy with M33 Ball Ammunition

Specifications:
BA50 Carbine • Caliber: .50 BMG
22” Barrel [12.7 X 99mm]
• Overall Length/Rifle:
58” [147.32 cm]
• Overall Length/Carbine:
Bushmaster BA50 Rifle… (BCW3M 30-50BMGLW) M.S.R.P. $4895.00 50” [127 cm]
Bushmaster BA50 Carbine… (BCW3M 22-50BMGLW) M.S.R.P. $4845.00 • Weight/Rifle:
30 Lbs. [13.6 kg]
• Weight/Carbine:
27 Lbs. [12.2 kg]

Bushmaster Rifles 2 [Link]

 30 YEARS OF
BUILDING GREAT AMERICAN RIFLES.
.450 Bushmaster
• .450 Bushmaster Caliber – Ammunition developed by Hornady
• 20” Bbl. Rifle or 16” Bbl. Carbine
• 5 Round Single Stack Magazine Capacity
• Free Floating Forends

Specifications:
Caliber .450 Bushmaster
Cartridge by Hornady

Magazine 5 rounds
.450 BUSHMASTER

Length overall - 20” Bbl. 38.25 inches

Length overall - 16” Bbl. 34.25 inches
Rifling 1 x 24"R.H. twist
Mode of Operation Gas Operated
Semi-Automatic
The .450 Bushmaster - big bore power in an
“AR” type platform. One gun industry writer
exclaimed… “I’ve found my new hog-hunting gun!”, but
this powerful cartridge (developed in affiliation with Hornady) is appropriate for any large
North American Game: Bear, Moose, Deer, etc. The 250 Grain Hornady SST bullet is tamed by the AR type gas
operating system so that recoil is reduced to a heavy thump, and the “Izzy” Muzzle Brake helps retain second
shot control. “AR” type 20 Rd. magazine boxes are fitted with special springs and a blue single stack follower to
yield a capacity of five rounds. Shipped with Case, Sling, Magazine and Manual.
Available at your FFL Dealer
Upper Rec./Bbl. Assemblies with Magazine
.450 Bushmaster 20" Bbl. Rifle… (BCWVMS 20-45) M.S.R.P. $1350.00 are available separately.
.450 Bushmaster 16” Bbl. Carbine… (BCWVMS 16-45) M.S.R.P. $1340.00 See “Uppers” Section of this catalog.

Bushmaster Predator… in Black or Camo

…built as a result of numerous requests by the hunters who wanted a slightly
shorter barrel and lighter swing weight in a carry rifle for predator hunting, 20” Fluted Bbl.
this 20” barreled version of our Varminter will deliver all the Rifled 1 x 8”
Non Chrome Lined
accuracy you expect from a Bushmaster.
Specifications:
Caliber 5.56 mm / .223 Rem.
Overall Length 38.25 inches Vented Free Floater Forend
Weight w/o Mag. 8 Lbs. with Sling/Bipod Stud
Gas Operated Semi-Automatic 5 Round
Hunting
Magazine

2 Stage
Competition The 20" Bushmaster Barrel
Trigger is fluted 4150 ChroMoly Vanadium
Steel (non- chrome lined) with sharp 1 x 8” twist
rifling for the heavier bullets typically used on bigger
varmints and predators. Features include a hybrid
SAAMI Spec. chamber; Two-Stage Competition Trigger (3
1/2 lb. take-up and 1 lb. let-off); a Vented Tubular Aluminum
RealTree© Max 1 Free-Floater Forend with Bipod Stud and a 5 Round Magazine
Camouflage Finish
(legal for hunting in most States). Shipped with Safety Block and
Operator’s Manual in a Lockable, Foam Padded, Hard Case.
Carrying Case included…$18.95 Value
Available at your FFL Dealer
Predator 20" Bbl. Rifle - Black… (PCWVMS 20FPRED8) M.S.R.P. $1310.00
Predator 20" Bbl. Rifle - Camo… (PCWVMS 20FPRED8M1) M.S.R.P. $1410.00
Bushmaster Rifles 3 Orders 24 Hrs.: 1 800 998 7928
 30 YEARS OF
BUILDING GREAT AMERICAN RIFLES.

Bushmaster Varminter
…includes all the options a varmint hunting specialist would order
in a custom rifle… The Varminter delivers long distance
accuracy, quick second shots, and Bushmaster reliability –
24” Fluted Bbl.
the perfect prairie dog rifle. Rifled 1 x 9”
Not Chrome Lined
Specifications:
Caliber 5.56 mm / .223 Rem. Vented Free Floater Forend
Overall Length 42.25 inches with Sling/Bipod Stud
Weight w/o Mag. 8.4 Lbs.
Gas Operated Semi-Auto
Available in Black or Camo
• 5.56mm / .223 Rem. Caliber, 24" Fluted
5 Round Magazine
Legal for Hunting Extra Heavy (1" diam. out to the gas block)
Bushmaster Varmint Barrel with 11° competition
crowned muzzle - 1 in 9" twist
• Barrel is 4150 ChroMoly Vanadium Steel with a hybrid
SAAMI Spec. chamber (longer throat or “Leade” for
5.56mm ammo - equally safe for use with .223 ammo)
• Competition 2-Stage Trigger - 1st Stage 3 1/2 lb./Letoff 1 lb.
• Vented Tubular Forend free-floats the barrel from the receiver forward
- with cooling vents to increase barrel heat dissipation
• Bipod Stud installed for easy mounting of most bipods, or a sling
RealTree© Max 1 • Shipped with 5 Round Magazine (legal for hunting in most states),
Camouflage Finish Safety Block, Operator’s Manual and Special Maintenance Instructions in a
Bushmaster Hard Plastic Lockable, Foam Padded, Carrying Case.
Carrying Case included…
Sold only through your FFL Dealer an $18.95 Value
Varminter 24" Bbl. Rifle - Black… (PCWVMS 24FVAR9) M.S.R.P. $1325.00
Varminter 24" Bbl. Rifle - Camo… (PCWVMS 24FVAR9M1) M.S.R.P. $1425.00

Bushmaster Stainless Varmint Special

…Based upon the design of our first Varminter, the “Stainless Varmint 24” 416 Stainless
Special” combines all the essentials for serious varmint hunting – Steel Barrel
Rifled 1 x 9
including a polished, 416 Stainless Steel, 5.56mm/.223 Rem. Caliber
24" Barrel (button rifled, 1 in 9" right hand twist). Specifications:
Vented Free Floater Forend Caliber 5.56 mm / .223 Rem.
Stainless Varminter with Sling/Bipod Stud Overall Length 42.25 inches
Special Rifle BMAS Barrel Length 24" - Rifling 1 x 9"
Scope Risers Weight w/o Mag. 8.84 Lbs.
(PCWVMS 24-9SS) 1/2” Height
Gas Operated Semi-Automatic
Available at your FFL Dealer Featuring:
5 Round
M.S.R.P. $1325.00 Hunting • Vented Free-floater Aluminum Forend with
Magazine Bipod/Sling Mount Stud installed
• Two 1/2"Height Bushmaster Modular
Accessories System Scope Riser Blocks
2 Stage • Hogue Ergonomic Pistol Grip for shooting
Competition
Trigger comfort and correct trigger pull angle
Hogue • Competition 2-Stage Trigger - 1st Stage 3 1/2 lb./Letoff 1 lb.
Ergonomic
Pistol Grip • A2 Buttstock complete with trapdoor storage compartment
• Shipped with Five Round Magazine (accepts all capacity AR15/M16
type magazines), Safety Block, Operator’s Manual in a Lockable Case.

Bushmaster Rifles 4 [Link]

 30 YEARS OF
BUILDING GREAT AMERICAN RIFLES.
Bushmaster Target Model Rifles… Caliber 5.56 mm / .223 Rem.
Removable Carry Handle is
included with A3 configuration Rifles
20" Bbl. A3 Target Model Birdcage Flash Suppressors

Others Optionally Available

Length overall - 39.5 inches
A2 Weight w/o Mag. - 8.43 lbs.

Chrome Lined
24" Bbl. A3 Target Model Bore & Chamber

Rifled 1 x 9” R.H.
Length overall - 43.5 inches
A2 Trapdoor A2 Weight w/o Mag. - 8.93 lbs.
Buttstocks Brush Finished
416 Stainless Steel
20" Stainless Bbl. A2 Target Barrels

• Heavy match grade barrels of either Chrome Lined

Chrome Moly Steel or Polished 416 Stainless Steel
• A2 Models features fixed carry handle w. std. rear sight
The Target Models are • A3 Models have “flat-top” Upper Receiver with
the “standards” of the Bushmaster line. Picatinny Rail for scope, sight, or optics attachment
• A3 Rifle Carry Handle Rear Sight has 1/2 M. o. A. for both elevation and windage
• Shipped with 30 Rd. Magazine, Safety Block, Operating / Safety Instruction Manual,
and Web Sling in Bushmaster hard case. These Rifles are also available in kit form.
• A3 20" Chrome Lined Bbl. Target Rifle (BCWA3S 20) Available from FFL Dealers M.S.R.P $1195.00
• A2 20" Chrome Lined Bbl. Target Rifle (BCWA2S 20) Available from FFL Dealers M.S.R.P $1095.00
• A3 24" Chrome Lined Bbl. Target Rifle (BCWA3S 24) Available from FFL Dealers M.S.R.P $1205.00
• A2 24" Chrome Lined Bbl. Target Rifle (BCWA2S 24) Available from FFL Dealers M.S.R.P $1105.00
• A3 20" Stainless Steel Bbl. Target Rifle (BCWA3S 20SS) Available from FFL Dealers M.S.R.P $1235.00
• A2 20" Stainless Steel Bbl. Target Rifle (BCWA2S 20SS) Available from FFL Dealers M.S.R.P $1135.00

Bushmaster V Match Rifle & Carbine… B.M.A.S. Front Flip Sight fits V Match models
(YHM-9360K) $106.95

V Match 16" Bbl. Carbine / Weight w/o Mag. - 6.8 Lbs. / Overall Length - 34.5”
V Match 20" Bbl. Rifle / Weight w/o Mag. - 7.99 Lbs. / Overall Length - 38.25”
V Match 24" Bbl. Rifle / Weight w/o Mag. - 8.83 Lbs. / Overall Length - 42.25”

A3 Removable Carry Handle (shown left) is optional for V Match models - clamps
onto Upper Receiver - includes 1/2 M.o.A. Rear Sight. (#9349063-9) $116.95

The V Match “Flat-top” Upper Receiver and “Free-Floater”

handguard make these models a great choice for the
competitive shooter. Heavy profile, ChroMoly Vanadium steel,
chrome lined barrels consistently deliver match winning accuracy. The knurled, tubular aluminum V Match
Handguard lets the barrel “free float” from barrel nut forward for optimum accuracy.
• Bushmaster V Match 16" Bbl. Carbine (PCWVMS 16) Available from your FFL Dealer M.S.R.P. $1105.00
• Bushmaster V Match 20" Bbl. Rifle (PCWVMS 20AH) Available from your FFL Dealer M.S.R.P. $1115.00
• Bushmaster V Match 24" Bbl. Rifle (PCWVMS 24AH) Available from your FFL Dealer M.S.R.P. $1125.00
Bushmaster Rifles 5 Orders 24 Hrs.: 1 800 998 7928
 30 YEARS OF
BUILDING GREAT AMERICAN RIFLES.
Bushmaster DCM-XR Series Competition Rifles
Bushmaster has re-designed this model to make the DCM Competition shooter
more competitive - at a new lower price! These rifles includes the
re-designed “Stay-Straight” Rear Sight and a
Competition Rear Sight Shroud in
addition to all the upgrades New Bushmaster
listed below. DCM-XR Series Competition Rifles
with A2 Solid Carry Handle… $1150.00
(PCWA2S 20DCM8XR)
with A3 Removable Carry Handle… $1250.00
(PCWA3S 20DCM8XR)
No extra cost for threaded muzzle & birdcage suppressor
(Change Part #s to BCWA2S or BCWA3S)
All prices M.S.R.P. - Available from your FFL Dealer
The Bushmaster DCM-XR Includes these Upgrades & Competition Modifications:
❶ A2 Rear Sight includes a Competition Rear Sight Shroud / New design “Stay-Straight” windage
adjustment mechanism with a dual detent keeps sight perfectly vertical (CMP approved) / Windage and Elevation
available in either 1/2 or 1/4 Minute of Adjustment / Rear Flip Sight specially modified to accept interchangeable
“micro-aperture” peeps / Micro-aperture inserts available in four sizes: .036" - .040" (standard, and most
commonly selected by competition shooters) - .046" and .052" sizes. Please specify when ordering.
❷ A Competition Front Sight Post specially ground on three sides for optimum visual clarity - available in your
choice of two different widths (.052" or .062" width). Please specify when ordering. Note: The post is secured
within the Front Sight Base by a set screw to avoid the possibility of movement once you have
established zero.
❸ A 20" Bushmaster Extra Heavy Competition Barrel – a full 1" in diameter under the handguard – with an 11°
Crowned Competition Muzzle. Precision button rifled in a 1 x 8" right hand twist, they are machined from Chrome
Moly Vanadium barrel steel, lapped and hardened to Rockwell C26 to 32 - superior to stainless barrels! With a
hybrid custom match chambering that uses a tighter SAAMI Spec. headspace from the chamber shoulder to the bolt
face, it has longer throat depth or "Leade" that will accommodate the higher pressure 5.56mm ammunition but
.223 Rem. caliber can be safely used as well. DCM Rifles can be ordered with either the plain crowned competition
muzzle or the A2 Birdcage Flash Suppressor. Note: These barrels are shipped well oiled. For your safety,
they must be cleaned before shooting. Follow all break-in and maintenance instructions included with
your rifle.
❹ The forearm uses stock style outer handguards over a “free floater” tube that does not contact the barrel. A
sling swivel is attached to the leading edge of the tube so as to avoid any possibility of barrel deflection when using
a sling.
❺ The Bolt is matched to the Barrel Extension for positive lockup and optimum accuracy.
❻ “Controlled Ejection Path” - Ejection of spent cases from the Receiver has been engineered so as to drop
them all in the same place - a great convenience for the reloader, and a courtesy to fellow competitors on the line.
❼ The Lower Receiver houses a finely honed Competition Trigger that is factory set for a DCM legal 4.5 lb. pull.
The 1st Stage is 3.5 lbs., and the letoff (2nd Stage) is 1 lb.
❽ The Buttstock includes a 3.62 lb. lead counterbalance weight. It can be cut down to achieve proper balance,
and adds to the solid feel of this special competition model. The overall weight of the rifle is 13.5 pounds.
Any of the accurizing parts built into the Bushmaster DCM Rifle can be ordered as accessory
additions for your rifle. For more information, call or go online to: [Link] or consult us
by email: Sales@[Link]
Junior High Power Competitors… See the special $800 – Juniors Only – Coupon Pricing Offer
on Bushmaster DCM-XR Competition Rifles. This offer is available only on our website – and only to qualifying
Junior Competitors. Rifles must be transferred through an FFL Dealer.
Bushmaster Rifles 6 [Link]
 30 YEARS OF
INNOVATIVE DEVELOPMENT FOR
Bushmaster Gas Piston Rifle… THE “AR” PLATFORM.
Includes BMAS
Bushmaster incorporates an ultra reliable Gas Piston Operating System into
this new Rifle - much like the systems on AK-47s and FALs. It functions with Front Flip Sight
a wide range of ammunition - using less gas pressure
and reduces required maintenance Gas Piston Carbine
to the bare minimum. (BCWA3F 16M4-GP)
5.56mm / .223 Caliber M.S.R.P. $1795.00
16” M4 profile Excess heat, carbon build up, and gas leaks
Chrome Lined Barrel
have been eliminated in a system operating at a
lower cyclic rate - with improve reliability and control -
reduced heat and maintenence. Carbon build up and
powder residue are prevented from fouling the interior
of the Upper Receiver - a superior operating system!
Cutaway View of Components

Also available - Gas Piston Uppers…

Snaps on to any Mil. Spec. Lower!

Bushmaster Gas Piston Operating

System Upper Receiver/Barrel
Assemblies are complete and ready
to function with your Lower.
Bushmaster 5.56mm / .223 Rem. Caliber Complete Gas Piston Upper Receiver / Barrel Assemblies…
A3 Type w. Removable Carry Handle… (BURA3B 16M4-GP) $1095.00 / A2 Type… (BURA2B 16M4-GP) $995.00
Bushmaster 6.8mm SPC Rifle… Cartridge
• 16” M4 Profile Barrel • Six Position TeleStock • 6.8mm SPC 26 Rd. Mag. Comparison
This Gas Operated Semi-Auto packs a bigger punch than our 5.56mm/.223
models - a .270 cal. 6.8mm SPC (”Special Purpose Cartridge”) punch
5.56mm/.223 Rem.

specifically developed for the military, but now available commercially.

Velocity averages a bit over 2600 FPS (with Hornady 115 Gr.
6.8mm SPC

V-Max), and the heavier bullet weights

deliver a terminal energy Specifications:
capable of bringing down Caliber 6.8mm SPC
larger game. Complete Magazine 26 rounds
Barreled Upper Receivers Length overall 34.75 inches
Barrel Length 16"
with Magazine are also Rifling 1 x 10" R.H.
available. Weight w/o magazine 6.5 Lbs.
6.8mm SPC Caliber Rifle w. Telestock
A3 Type (BCWA3F 16M468) M.S.R.P. $1295.00
A2 Type (BCWA2F 16M468) M.S.R.P. $1195.00
A2 Models Available through your local FFL Dealer.
A3 Model with Solid
Includes Carry Handle 6.8mm SPC Upper Receiver/Barrel Assembly
Removable also available.
Carry Handle A3 Type (BURA3B 16M468) $760.00
A2 Type (BURA2B 16M468) $660.00
Complete 6.8mm SPC Caliber
Upper Receiver/Barrel Assemblies
include 26 Rd. 6.8mm SPC Magazine

Bushmaster Rifles 7 Orders: 1 800 998 7928

 30 YEARS OF
CREATING CLASSIC CARBINES.

Bushmaster M4 Type Carbines…

14.5” M4 Profile Barrel • Izzy Compensator/Flash Suppressor • Six Position TeleStock • 30 Rd. Magazine
M4A3 Carbine includes M4A3 Type Carbine
A3 Removable Carry Handle “Izzy”Compensator/Flash Suppressor

Specifications:
Mode of Operation: Semi-Automatic
Caliber: 5.56 mm / .223 Rem.
Barrel Length: 16" overall
Rifling: R.H. twist; 1 turn in 9"
M4A2 Type Carbine Length (stock retracted): 30.875”
Weight w/o magazine: 6.22 Lbs.

• M4A3 Type Carbine w. Telestock (BCWA3F 14M4 IZ)

Six Position Telestock Available from your FFL Dealer M.S.R.P. $1260.00
• M4A2 Type Carbine w. Telestock (BCWA2F 14M4 IZ)
Other Stocks / Flash
Suppressors / Muzzle Brakes available Available from your FFL Dealer M.S.R.P. $1160.00
One of our most popular carbines, the Bushmaster M4 Type features a lightweight 14.5" Barrel machined in the
distinctive M4 profile. With the “Sunset” of the 1994 A.W.B., we can now offer this model with a permanently
attached (pinned and welded over) “Izzy” Compensator/Flash Suppressor, Six Position Telestock and High Capacity
Magazine. This configuration yields a total barrel length of 16" to comply with BATF regulations for semi-automatic
rifles. The barrel is chrome lined in both bore and chamber for longevity and easy cleaning, and the 1 x 9" twist
button rifling will stabilize a wide range of currently available ammunition (bullet weights up to 75 grains). On the
A2 Type, the M16A2 dual aperture, rear sight system offers both windage and elevation adjustments (calibrated
from 300 to 800 meters).
The M4A3 Type Carbine includes a Removable Carry Handle with 1/2 Minute of Adjustment Rear Sight -
calibrated from 300 to 600 meters. The Upper Receiver’s full length Picatinny rail accepts a wide array of scopes, red
dot sights, accessories, and night vision equipment. The Bushmaster M4 Carbine is shipped in a lockable case with
30 Round Magazine, Black Web Sling, Safety Block, and Operator’s Safety and Instruction Manual.

Bushmaster M4 Type “Patrolman’s” Carbine… • 16” M4 Profile Barrel

• 6 Position TeleStock
M4A3 Type Patrolman’s • 30 Round Magazine
Carbine includes M4A3 Type Patrolman’s Carbine
A3 Removable Carry Handle • A2 Birdcage Flash Suppressor

Carrying Case included…

an $18.95 Value

Six Position M4A2 Type Patrolman’s Carbine

Telestock

Overall Length - 36.25 inches

A2 Weight w/o Magazine - 6.35 lbs.

• M4A3 Type Patrolman’s Carbine (BCWA3F 16M4)

Available from your FFL Dealer M.S.R.P. $1225.00
Alternate optional • M4A2 Type Patrolman’s Carbine (BCWA2F 16M4)
buttstocks, flash suppressors
and compensators are available – Available from your FFL Dealer M.S.R.P. $1125.00
consult your Bushmaster Salesperson.
Bushmaster’s M4 Type Carbines are available in kit form - stripped lower receivers available at your FFL dealer.
Bushmaster Carbines 8 [Link]
 30 YEARS OF
CREATING CLASSIC CARBINES.

Bushmaster Modular Carbines…

Bushmaster’s 16" Bbl. Modular Carbines combine many of the most
popular items from the Bushmaster Modular Accessories System
(B.M.A.S.) into a completely unique firearm. Designed
around an A3 type “flat-top” Upper, 16" Fluted Barrels - Chrome
the Modular Carbine has a 16" Lined in Bore & Chamber
with A2 Birdcage Suppressor
Chrome Lined, Fluted Barrel BMAS Four Rail Forends
with Milled Gas Block.
BMAS
Flip-up Sights
Front & Rear
ErgoGrip Specifications:
6 Position Pistol Grips
Caliber 5.56mm / .223 Rem.
Telestock Overall Length 34.5" [87.63 cm]
Barrel Length 16" [40.64 cm]
Rifling 1 turn in 9" R.H. twist
Ace
Skeleton Weight w/o mag. 7.3 lbs. [3.31 kg]
Stock The Modular Carbine can be configured
with either a Bushmaster 6 Position Telestock
Also available or the Ace Skeleton Stock – which features a
without flash comfortable rubber buttplate; quick detach sling
suppressor & bayonet
lug for States with swivel mount for positioning on left or right side
those restrictions. of the carbine; a neoprene foam sleeve covering the
buffer tube for good cheek weld (it also deadens the operational sounds of the buffer/action spring).
A B.M.A.S. Four Rail Free-Floater Forend combined with the A3 type “flat-top” Upper Receiver provide all
the Picatinny rails necessary for sights, scopes or accessories. Molded Rubber Sure Grips snap over the rail
sections to add comfort and rail protection. The Dual Aperture B.M.A.S. Rear Flip-up Sight is a detachable unit
with a windage knob calibrated to 1/2 Minute of Adjustment. The B.M.A.S. Front Flip-up Sight clamps around
the milled gas block, and an ergonomically contoured Pistol Grip completes this special carbine. Shipped with a
30 Round Magazine, Operating & Safety Manual, Safety Block, and Sling in a lockable hard carrying case.
• Modular Carbine w. 6 Position Tele (BCWVMF 16FMC) Available from your FFL Dealer M.S.R.P. $1745.00
• Modular Carbine w. Skeleton Stock (BCWVML 16FMC) Available from your FFL Dealer M.S.R.P. $1745.00
Bushmaster 11.5” Bbl. Carbine w. 5.5” Suppressor…
This lightweight carbine features an 11.5” heavy barrel with a 11.5" Chrome Lined Barrel
with Permanently Fixed
pinned and welded 5.5” CAR 15 Flash Suppressor attached. The 5.5” Flash Suppressor
total length of barrel/suppressor makes a legal length of
Length overall - 35.5 inches
16” as required by Length / stock retracted - 31.5 inches
ATF regulations. Weight w/o Magazine - 7.5 lbs.
Caliber: 5.56 mm / • A3 11.5” Bbl. / 5.5“ Suppressed Carbine
.223 Remington Available at (BCWA3F 11.5/5.5) M.S.R.P. $1215.00
your FFL Dealer. A3 Carbine includes Removable Carry Handle
A3 model shown here,
A2 configuration •
A2 11.5” Bbl. / 5.5“ Suppressed Carbine
(BCWA2F 11.5/5.5) M.S.R.P. $1115.00
also available.
Bushmaster’s six position telestock is fitted to either
the A2 or A3 configurations, and a 30 Rd. magazine is
supplied (accepts all AR-15/M16 type magazines). Standard
A2 sights are adjustable for elevation (1 M.o.A.) and windage (1/2 M.o.A.). On A3 configurations, the
Removable Carry Handle is included (with 1/2 M.o.A. rear sight). The Bushmaster 11.5” Bbl. Carbine is
shipped in a lockable carrying case with Safety Block, Web Sling, Operator’s Safety and Instruction Manual.
Most Bushmaster Carbines are available in kit form - including all parts except the stripped lower.
Many options are available – consult your Bushmaster salesperson. Receivers must be purchased from an FFL Dealer.
Bushmaster Carbines 9 Orders: 1 800 998 7928
 30 YEARS OF
CREATING CLASSIC CARBINES.
A2 Dissipator Carbine
Bushmaster Dissipator Carbines… with Telestock

The gas block in this versatile carbine

is behind the front sight base, and
under the handguards, to ensure
correct gas pressure in the 16”
carbine length barrel. Full Length Forend
for Full Sight Radius

A3 Models The full length rifle

Include Removable handguards offer excellent heat
Carry Handle
dissipation (hence the name), and placement
of the front sight allows for optimal use of the
full sight radius designed into the M16A2 sight
system. The 16" heavy profile barrel is chrome
A3 Dissipator
Carbine lined in both bore and chamber for excellent
with Solid Stock accuracy and long life.
The Dissipator is available with either a Six Position Telestock or an A2 Solid Buttstock.
Overall Length w. TeleStock - 34.5”/ A2 TeleStocked Weight w/o Mag - 7.44 lbs. / Overall Length w. A2 Stock - 34.75” / A2 Solid Stock Weight w/o Mag - 7.9 lbs.
• Dissipator A3 16” Bbl. Carbine w. A2 Buttstock (BCWA3S 16D) From FFL Dealers M.S.R.P. $1205.00
• Dissipator A2 16" Bbl. Carbine w. A2 Buttstock (BCWA2S 16D) From FFL Dealers M.S.R.P. $1105.00
• Dissipator A3 16" Bbl. Carbine w. Telestock (BCWA3F 16D) From FFL Dealers M.S.R.P. $1230.00
• Dissipator A2 16" Bbl. Carbine w. Telestock (BCWA2F 16D) From FFL Dealers M.S.R.P. $1130.00
Bushmaster SuperLight Carbines…
A3 Carbines include the Removable Carry Handle
Overall Length w. Tele - 34.5 inches Slim Profile
Overall Length w. Stubby - 31.25 inches Barrels with either
A2 Weight w/o Mag - Tele - 6.25 lbs. 6 Position TeleStock
A2 Weight w/o Mag - Stubby - 5.8 lbs. or “Stubby Stock”
A3 SuperLight Carbine
with 6 Position TeleStock
Bushmaster
Carbines include
Carrying Cases…
an $18.95 Value

A2 SuperLight Carbine
with “Stubby” Stock
The Bushmaster SuperLight - our lightest 16"
chrome lined barrel (.670” to .565” diam. under
the handguard, .625” diam. under the sight base,
and .570” diam. out to the muzzle), in
combination with either the Six Position TeleStock
or the “Stubby” Stock make a sweet handling,
easy to shoot carbine.
• SuperLight A3 Carbine w. TeleStock… (BCWA3F 16SL) Available at FFL Dealers M.S.R.P. $1215.00
• SuperLight A2 Carbine w. TeleStock… (BCWA2F 16SL) Available at FFL Dealers M.S.R.P. $1115.00
• SuperLight A3 Carbine w. Stubby Stock… (BCWA3Y 16SL) Available at FFL Dealers M.S.R.P. $1190.00
• SuperLight A2 Carbine w. Stubby Stock… (BCWA2Y 16SL) Available at FFL Dealers M.S.R.P. $1090.00
Most Bushmaster Carbines are available in kit form - including all parts except the stripped lower.
Many options are available – consult your Bushmaster salesperson. Receivers must be purchased from an FFL Dealer.
Bushmaster Carbines 10 [Link]
 30 YEARS OF
CREATING CLASSIC CARBINES.
Bushmaster 16" Heavy Barreled Carbine…
Other optional buttstocks are 16” Hvy. A3 Carbine -
available – consult Bushmaster Sales Includes A3 Carry Handle

Caliber: 5.56 mm / .223 Rem.

Magazine: 30 rounds
The 16” Heavy Carbine is very Overall Length: 34.5” (87.63 cm)
popular with Law Enforcement Barrel Length: 16” (40.64 cm)
Officers as well as 3 Gun Match Rifling: R.H. twist; 1 turn in 9"
Weight w/o mag.: 7.16 Lbs. (3.25 kg)
Competitors. Mode of Operation: Semi-Automatic
• 16" A3 Heavy Carbine w. Telestock… (BCWA3F 16) Available from your FFL Dealer M.S.R.P. $1215.00
• 16" A2 Heavy Carbine w. Telestock… (BCWA2F 16) Available from your FFL Dealer M.S.R.P. $1115.00

Bushmaster O.R.C.© Carbine… [Optics Ready Carbine - add your favorite optics – no iron sights]

• 5.56mm /.223 Rem. 16” M4

Chrome Lined Barrel with A2 Bird Cage Suppressor
• Receiver Length Picatinny Rail w. 1/2” Optics Risers
• Oval M4 Type Forend • Six Position Telestock
Overall Length: 34.5” (87.63 cm) Available • Milled Gas Block • One Year Bushmaster Warranty
at your
Barrel Length: 16” (40.64 cm) FFL Dealer • Shipped in Hard Case with Operator’s Safety Manual, 30
Rifling: R.H. twist; 1 turn in 9"
Weight w/o mag.: 6 Lbs. (2.72 kg)
Round Magazine, Safety Block and Sling
Mode of Operation: Semi-Automatic • O.R.C. Carbine w. Telestock… (BCWVMF 16M4ORC) M.S.R.P. $1085.00
Bushmaster “AK” Carbine… With permanently attached AK-47 type muzzle brake,
AK A3 Carbine (not shown) overall barrel length of 17", this
AK A2 Carbine Caliber: 5.56 mm /.223 Rem.
includes Removable Carry Handle is an ATF legal semi-auto.

Overall Length - 35.25”/ Weight w/o Mag - 7.56 lbs.

• AK Carbine - A3 with Telestock (BCWA3F 14.5AK)

Available from your FFL Dealer M.S.R.P. $1265.00
Shipped with 30 Rd. Mag
• AK Carbine - A2 with Telestock… (BCWA2F 14.5AK)
Sling / Case / Operators Manual Available from your FFL Dealer M.S.R.P. $1165.00

M4 Type “Post-Ban” Carbine… • M4 Profile Barrel • Izzy Compensator

• Fixed Length Stock • 10 Rd Mag.

• M4A3 Type Post-Ban Carbine (PCWA3X 14M4IZ) M4A2 Type Shown here
Available at your FFL Dealer M.S.R.P. $1265.00 BATF Approved,
• M4A2 Type Post-Ban Carbine (PCWA2X 14M4IZ) Fixed Position, Tele-Style
Buttstock
Available at your FFL Dealer M.S.R.P. $1165.00 10 Rd. Magazine
“Pre-Ban or Post-Ban”?… Most Bushmaster models are available in either configuration. “Pre-Ban” models (as
manufactured prior the Federal Assault Weapons Ban of 1994) include High Capacity (30 Rd.) Magazine, Flash Suppressor, Bayonet
Lug and possibly a Telestock. After the “sunset” of the Assault Weapons Ban in 2004, many States still have regulations prohibiting
those “Assault Weapon Features”. For those States, Bushmaster manufactures models in “Post-Ban” configurations. If in doubt
about firearms configuration legalities in your State, consult your State Legislators, or a Bushmaster Salesperson.
Bushmaster Carbines 11 Orders: 1 800 998 7928
 30 YEARS OF SUPPORT
AND PRODUCTS FOR LAW ENFORCEMENT.
Bushmaster M4 Type Law Enforcement Carbines…
14.5” M4 Profile Barrel • A2 Birdcage Flash Suppressor • Six Position TeleStock • 30 Rd. Magazine
Specifications:
M4A3 Carbine includes M4A3 Type Carbine Mode of Operation: Semi-Automatic
A3 Removable Carry Handle
Caliber: 5.56 mm / .223 Rem.
Barrel Length: 14.5"
Rifling: R.H. twist; 1 turn in 9"
Length (stock retracted): 30.875”
NOTE: Due to barrel length, this model must be registered
as a short barreled rifle, and requires ATF permits. Weight w/o magazine: 6.22 Lbs.

Six Position Telestock • M4A3 Type Carbine w. Telestock (BCWA3F 14M4)

Consult Bushmaster Law Enforcement Sales for Pricing
Other optional Stocks, Flash • M4A2 Type Carbine w. Telestock (BCWA2F 14M4)
Suppressors and Muzzle Brakes
are available. Perhaps the most widely deployed Law Enforcement carbine
on the streets today, the M4 Type features a lightweight 14.5" Chrome Lined Barrel machined with the distinctive
M4 cutaway (designed to mount the M203 Grenade Launcher). Chrome lining the barrel’s bore and chamber offers
great durability and easy cleaning, and the 1 x 9" twist button rifling will stabilize a wide range of currently
available ammunition (bullet weights up to 75 grains). On the A3 model, the Upper Receiver’s full length Picatinny
rail accepts a wide array of scopes, red dot sights, accessories, and night vision equipment. The Bushmaster M4
Carbine is shipped in a lockable case with 30 Round Magazine, Black Web Sling, Safety Block, and Operator’s
Safety and Instruction Manual. Full-Auto, 3 Round Burst and Semi-Auto configurations are available.
Bushmaster 11.5" Bbl. LE Entry Carbine… Compact, powerful, well balanced, and
manueverable in tight confines the Bushmaster Entry Carbine is ideal for deployment from the Squad Car.
11.5” A3 Entry Carbine -
Includes A3 Carry Handle
Specifications:
Six Position Telestock Caliber: 5.56 mm / .223 Rem.
Magazine: 30 rounds
Overall Length: 31.625” (80.34 cm)
Barrel Length: 11.5” (29.2 cm)
Full Auto and 3 Rd. Burst configurations Rifling: R.H. twist; 1 turn in 9"
are available. Consult Bushmaster Weight w/o mag.: 6.81 Lbs. (3.09 kg)
L.E. Sales for detailed information. Mode of Operation: Semi-Automatic
• 11.5" Bbl. A3 Entry Carbine… (BCWA3F 11.5)
NOTE: Due to barrel length, • 11.5" Bbl. A2 Entry Carbine… (BCWA2F 11.5)
this model must be registered
as a short barreled rifle, and requires ATF permits. Contact your Class 3 L.E. Dealer for Pricing
Bushmaster Law Enforcement Pistols… In both 5.56mm and 9mm calibers, these
light weight and powerful pistols feature molded Carbon 15 Receivers and familiar AR15 type operational controls.
Carbon 15 9mm LE Pistol Fixed Sights on Full Length Optics Rail Specifications: Caliber: 9mm (9 x 19 NATO)
(AZ9-BMP21S) Magazine: 30 Rds. (metal construction)
Overall Length: 22” (55.8 cm)
Barrel Length: 7.2.5” (18.42 cm) Rifled 1 x 10"
Weight w/o mag.: 4.8 Lbs. (2.2 kg)
Mode of Operation: Semi-Auto; Full Auto; 3 Shot Burst
Flip Up Front & Rear Sights
Telestocks reduce
on Vented 4-Rail Forend
Contact your Class 3 L.E. Dealer for Pricing
overall length by 4”
when collapsed Caliber: 5.56 mm / .223 Rem.
Magazine: 30 Rds. (accepts all M16/AR15 Type)
Overall Length: 22” (55.8 cm)
Barrel Length: 7.2.5” (18.42 cm) Rifled 1 x 9"
Weight w/o mag.: 5.1 Lbs. (2.31 kg)
Mode of Operation: Semi-Auto; Full Auto; 3 Shot Burst
Designed for Law Enforcement and Military applications, the
Carbon 15 5.56mm LE Pistol Carbon 15 Law Enforcement Pistols combine lightweight Carbon 15
(AZ-C15BMP21SP4) molded Receivers, versatile Optics Rails, and Six Position Telestocks
for compact carry size and maneuverability in tight confines.
Bushmaster Carbines 12 [Link]
 30 YEARS OF
INNOVATIVE FIREARMS TECHNOLOGY.

Bushmaster Carbon 15 9MM Carbine & Pistol…

Bushmaster brings all the durability and light weight that Carbon Fiber construction
offers to the 9mm NATO caliber (9 x 19mm). This Carbine and Pistol are ideal for
Law Enforcement, personal protection and unique fun at the range.
A blowback operating system offers smooth Semi-Auto
operation with low recoil, and
light weight makes for ease of
carry and quick target
acquisition.
Bushmaster
Carbon 15 9MM Pistol
(AZ9-C15P21S)
M.S.R.P. $1025.00
• Carbon Fiber Composite Receivers
• Full Length Picatinny Optics Rail
• M203 Type Forend / Sling Studs
• 7.25” ChroMoly Steel Barrel
Bushmaster Carbon 15 9MM Carbine • A1 Birdcage Flash Hider
(AZ9-C15R16FT) M.S.R.P. $1050.00 • Dual Aperture Rear Sight
• Blow-back Operation • Carbon Fiber Composite Receivers • A2 Square Post Front Sight
• Picatinny Optics Rail • 16” ChroMoly Steel Barrel with A1 Birdcage Flash Hider • 30 Round Magazine
• Dual Aperture Rear Sight / A2 Square Post Front Sight • Six-Position Telestock • Sound Reducing Neoprene Foam Sleeve over Buffer Tube
• Length - 34.5” Overall / Weight - 5.7 lbs. w/o Magazine • 30 Round Magazine • Length - 22.75” Overall / Weight - 4.6 lbs. w/o Magazine

Carbon 15 “Flat-top”; Carbon 15 Model 4 Carbine

16” Bbl.
and Carbon 15 R97F Great Lightweight Carry/Calling Guns... Carbon 15
Traditional .223 Cal. Carbine Flat-top Upper with
“Flat-top” Carbine
Design with light and durable Flip-up Sight
(AZ-C1516M4FT)
Carbon 15 Receivers M4 Type
M.S.R.P. $1155.00
Chrome Lined Bbls.
Overall Length - 37” Flip-up 1 x 9” Rifled
Weight - 5.77 Lbs. Rear Sight
Carbon 15
“Model 4” Carbine
14.5” Bbl.
(AZ-C15M4PRE)
Six
M.S.R.P. $1155.00
Position • Permanent Izzy Compensator on 14.5” M4 Barrel
Telestocks • Flat-top Picatinny Rail or Raised Rail with Integral Sight
• Dual Aperture Rear Sight / A2 Post Front Sight
30 Rd. • Safety Controls Marked on Both Sides of Receiver
Magazine • Shipped with Sling, Manual, Bushmaster Case
• One Year Bushmaster Warranty
Overall Length - 35”
Weight - 5.5 Lbs. Carbon 15
Case included…
R97F Rifle (AZ-C15R97F)
$18.95 Value M.S.R.P. $1265.00
• Weight 4.5 Lbs. / 35” Overall Length
Carbon 15 Ribbed • A2 Birdcage on 16” Fluted Stainless Barrel
R97F Forend Design
• Full Length Picatinny Optics Mounting Rail
Rifle • Dual Aperture Rear / Blade Front Sight
Six Position Hogue • Safety Controls Marked on Both Sides of Receiver
Telestock Grip • Forend Sling Stud installed • 30 Round Magazine
Carbon 15
R21 Rifle Carbon 15 R21 Rifle (AZ-C15R21) M.S.R.P. $990.00
• 16" Stainless Steel Match Grade Barrel - 1 x 9 twist • Quick Detach Compensator
• Black Oxide Bolt Carrier • Receiver Length Picatinny Optics Mounting Rail
Bushmaster’s • Weight - 4 Lbs. / Overal Length 35” • Safety Controls Marked on Both Sides of Receiver
Lightest Rifle • Shipped with 30 Round Magazine, Sling, Operation & Safety Manual - One Year Warranty
Carbon 15 Models 13 Orders: 1 800 998 7928
 30 YEARS OF
INNOVATIVE FIREARMS TECHNOLOGY.
Bushmaster Carbon 15 Pistols…
These unique Handguns… utilize the same Carbon Fiber composite technology and rugged features as the
Bushmaster Carbon 15 Rifles – resulting in incredibly light, durable, and power-packed 5.56mm / .223 cal. pistols.
Carbon 15 Type 97S Pistol
(AZ-C15P97S) M.S.R.P. $1095.00
• 7.25" 416 Match Grade Stainless Steel Barrel
Rifled 1 x 9 w. Birdcage Flash Suppressor
• Dual Aperture Rear Flip-up and Blade Front Sights
High Tech ® ™
• Chromed Bolt Carrier • Hogue OverMolded Pistol Grip
Carbon Fiber • Full Length Optics Rail & Lower Accessory Rail • 30 Rd. Magazine
Molded
Receivers and
Components Carbon 15 Type 21S Pistol
(AZ-C15P21S) M.S.R.P. $1050.00
• 7.25" 416 Match Grade Stainless Steel Barrel
• Birdcage Suppressor • Black Oxide Bolt Carrier
• Dual Aperture Rear Flip-up and Blade Front Sights
Gas Operated • Studs for Quick Detach Sling Swivel
Semi-Automatic • Full Length Picatinny Optics Rail • 30 Rd. Magazine
5.56mm/.223 Rem.
Stainless Steel
Barrels Carbon 15 Type 97 Pistol
(AZ-C15P97) M.S.R.P. $990.00
• 7.25" 416 Match Grade Stainless Steel Barrel
Rifled 1 x 9 w. Quick Detach Compensator
® ™
All Pistols are 20" • Hogue OverMolded Pistol Grip • Chrome Plated Bolt Carrier
Overall Length • Ghost Ring Rear and Blade Front Sights • 30 Round Magazine
Weights without
Magazine or Bushmaster Conversion Kit to Upgrade C15 P21/P97
Compensator: Pistols to P2 1S Configuration (AZ15921S) $159.95
47 to 55 ozs. Includes all parts to convert older pistols to new “handguard style” (like P21S
above). Anodized Aluminum Rail with Dual Aperture Rear and Blade Front Sights;
Carbon 15 Forend; Handguard Retainers; Gas Block; Sling Studs and Screws, Nuts,
Pins. Due to necessary machining / tapping, this kit requires factory installation.
Oval P21S Handguard Kit (AZ15921) $69.95
Includes Oval Carbon 15 Handguard, Handguard Retainers; Gas Block; Screws
and O-Rings (all parts shown at left except Rail - factory installation required).
Lower Accessory Rail for Pistol Forends (AZ15695) $52.95
Makes a P21S into a P97S - Rail as shown on P97S Pistol above.

Carbon 15 Length - 37"/ Stock Retracted - 33” Bushmaster manufactures the

AZC-C15RM4FT Model under
Weight - 5.8 lbs.
“Top Loader” License to Patent # 6,739,082

Carbon 15 Top Loading Carbine… (AZC-C15RM4FT)

MSRP $1070.00 Available through FFL Dealers
• 16" M4 Profile Chrome Lined Barrel - 1 x 9 twist - with Izzy Suppressor • A2 Standard Front Sight
• Dual Aperture Rear Sight • Receiver Length Optics Mounting Rail • Lightweight Carbon 15 Receivers
Sealed Magazine Well • 6 Position Telestock • Safety Controls Marked on Both Sides of Receiver • 10 Round Internal Magazine
The unique Carbon 15 “Top Loader” was developed for the California market (and
other States with similar laws). It offers traditional AR-15 type features, Carbon Fiber
composite molded Receivers for light weight, and a 10 Rd. Internal Magazine - loaded
by opening the Receivers (magazine components are permanently pinned within the
Internal Lower Receiver. Shipped in Bushmaster’s lockable hard case with Black Web Sling,
10 Round
Magazine Safety Block, Sighting In Target, Operation and Safety Manual - One Year Warranty.
Carbon 15 Models 14 [Link]
BUSHMASTER XM15-E2S Complete Lower Receiver Assemblies...
Why Bushmaster Lower Receivers are the Best...
• Precision machined from high tensile strength 7075 T6 Aluminum Alloy
Forgings – Bushmaster DOES NOT use castings.
• Bushmaster Receivers are guaranteed for fit and function to ensure that
if you ever buy a second Upper Receiver/Barrel assembly, it will be
completely compatible and interchangeable with your lower receiver.
• M16 A2 design reinforcement area around front pivot pin and reinforcing
ridge over the receiver extension attachment area for extra strength.
• Protective finish: Hard Anodize Military A8625, Type III, Class 2 finish (lusterless,
flat, approximate Black No. 36118 Table IX). We do not paint our receivers.
• Surfaces are bead blasted to a non-reflective matte finish prior to anodizing. Lower Receiver
• A Nickel Acetate final seal coating protects against corrosion. Assembly with Pistol Grip
• Raised “ridge” around magazine catch button protects against accidental (ALOW W/OSTK) M.S.R.P. $275.00
magazine release. Also avail. for 6.8mm SPC Caliber
• Standard pivot pin design connects uppers and lowers with captivated front
pivot pin and rear take down pin (so the pins can't fall out and become lost). (A LOW W/OSTK-68) M.S.R.P. $275.00
An FFL is required for the purchase of any Lower Receiver. Contact your local FFL Dealer, prices may vary from suggested retail above.
Lower Receiver Assembly with Six Position “TeleStock”, Pistol Grip, and all internal components.
With the Sunset of the 1994 Assault Weapons Ban, Bushmaster FFL Required
for Purchase
can again offer this Lower Receiver Assembly featuring
a Six Position Telescoping Stock. This assembly is all
Bushmaster highest quality components – complete
Lower with
and ready to use – just snap on your Upper Receiver. Telestock…
An FFL is required for purchase, or you can order through your M.S.R.P. $360.00
FFL Dealer. NOTE: Assemblies with Telestocks may still be illegal in some (A LOW TELEP)
States. Check your own State and County Statutes to determine legality. For 6.8mm SPC…
Also available - Lower Assembly with ATF approved Fixed Length Tele-Style Stock (A LOW TELEP-68) $360.00
(not shown - see Pistol Grips / Buttstocks Section). Lower w. Fixed Tele… M.S.R.P. $360.00 (A LOW PERMX)
Lower Receiver Assemblies with Trapdoor, or Skeleton Stock…
Fully assembled and ready for an
Upper Receiver - Solid A2 Buttstock (5/8"
longer than the original A1) includes
“trapdoor” storage compartment.
5.56mm/.223 Cal. M.S.R.P. $335.00
(A LOW STD)
Also avail. for 6.8mm SPC Caliber
(A LOW STD-68) M.S.R.P. $335.00
The same Complete Lower Receiver
Assembly is also available with the light
An FFL is required for purchase
Ace Skeleton Stock, which offers a comfortable of any Lower Receiver. Contact your
rubber buttpad, a neoprene foam sleeve over the extension tube, local FFL Dealer, prices may vary from
and multiple mounting points for the Q.D. sling swivel (included). Suggested Retail Prices shown.
Lower w. Ace… M.S.R.P. $415.00 (A LOW SKELETON)
Bushmaster “Stripped” Lower Receiver… This is the premium quality base for those who want to build a
Bushmaster Rifle “from the ground up”. To assemble this machined 7075 T6 Aluminum Forging, you'll need a
Complete Lower Parts Kit and your choice of stocks (see Pistol Grips /
Buttstocks Section in this catalog). For complete rifle buildup
instructions, we recommend the Bushmaster Video or the U.S. Gov’t.
M16A2 Technical Manual (see Gunsmithing Section in this catalog).
Stripped Lower for 5.56mm… M.S.R.P. $195.00 (9349102-S)
Stripped Lower for 6.8mm… M.S.R.P. $195.00 (9349102-S-68)
Bushmaster Carbon 15 “Stripped” Lower Receiver… These are the same lightweight receivers we use on
our new C15 M4 Type “Flat-top” Carbine and others. Standard “AR” Parts (like our Lower Receiver Parts Kit) drop
right in. Carbon 15 composite components are lighter, cooler in operation and have no surface finish to wear off.
C15 M4 Type Receiver… M.S.R.P. $195.00 (AZ15780)
Also available:
C15 R21/97/97S Receiver… M.S.R.P. $195.00 (AZ15180)
C15 P21/97 Pistol Receiver… M.S.R.P. $195.00 (AZ15179)
For other Carbon 15 Receiver Assemblies, consult your Bushmaster
Salesperson. A Federal Firearms License is required for purchase of all lowers.
NOTE: BATF RULING PROHIBITS USE OF M16 COMPONENTS IN LOWER RECEIVER.
See Page 19 for an M16/AR15 parts comparison if you have any doubt about parts in your rifle.
Bushmaster Receivers & Parts 15 Orders 24 Hrs.: 1 800 998 7928
BUSHMASTER Upper Receivers…
Complete A2 Upper Receiver… $186.95 (Part# A2UR)
Assembled with the A2 Dual Aperture Rear Sight, Ejection
Port Cover, and Forward Assist Assemblies. Forged of
7075T6 Aircraft Aluminum, these quality Receivers are
machined to mil. spec. or better, and hard anodize
finished to a dark gray non-reflective finish. They include
an integral brass deflector, and a baked on dry film lube
coating inside for long wear and smooth carrier
operation. Charging Handle is not included.

Bushmaster A2 Stripped Upper Receiver… $121.95

(9349063) This ready-to-assemble, fully machined, anodize
finished and dry lubed forging is top Bushmaster quality. Start
building your AR rifle with the best new stripped Upper Receiver
available. Requires a Rear Sight; Forward Assist Assembly and
Ejection Port Cover Assembly for completion - all parts and tools
to help assemble your Bushmaster Upper are available in this
catalog. Also see our Parts Schematic on Pages 40/41.

Bushmaster A1 Upper Receivers… The early AR15/M16 Upper

Receiver differed from the current A2 in that its simpler rear sight did
not include an elevation adjustment. The Forward Assist Assembly
often utilized the “tear-drop” type button although mechanically
identical in function to the round type (either are available).
Aircraft quality 7075T6 aluminum forgings are used for
strength, and they include the integral cartridge case
deflector. The finish is a mil. spec., non-reflective hard
anodize with a baked on dry film lube coating inside to
ensure long wear and smooth carrier operation.
Complete A1 Upper Receiver Assembly… $154.95
(A1UR) Shown above right - includes Forward Assist Assembly,
Ejector Cover Assembly and A1 Sight Assembly.
Stripped A1 Upper Receiver Assembly… $121.95
(8448524) Shown at right, this is a fully machined and finished
forging ready for assembly - does not include Forward Assist
Assembly, Ejector Cover Assembly or A1 Sight Assembly.

V Match (”Flat-top”) Upper Receiver Assembly - with

integral Picatinny rail… $182.95 (Part# VUR) This is the
popular A3 “flat-top” Upper Receiver. It’s Picatinny configuration
rail allows mounting the wide variety of scopes, sights and
optics available for the AR system. It has been carefully
machined from a 7075T6 Aircraft Aluminum Forging and is
complete as shown with Ejection Port Cover and Forward Assist.
Stripped V Match (”Flat-top”) Upper Receiver…
$151.95 (Part# 8448524-V) A fully machined and hard anodize
finished 7075T6 Aircraft Aluminum Forging ready for assembly.
Requires the Ejection Port Cover Assembly and the Forward
Assist Assembly shown on Page 20 for completion.
Carbon 15 Molded Upper Receivers… Injection molded of
Carbon Fiber composite developed in the Aerospace Industry, with
these light weight and extremely durable Receivers you can build the
lightest AR type rifle around. They do not require Ejection Port Covers
or Forward Assist Assemblies.
Carbon 15 Flat-top Upper Receiver… $151.95 (AZ15747)
Shown upper right - includes a Picatinny Rail for optics attachment.
Carbon 15 Pistol Upper Receiver… $139.95 (AZ15067)
Pistol Upper (right) is slotted for the Ghost Ring Sight as on P21/97.
Call for information and pricing on other Carbon 15 Receivers.
Bushmaster Receivers & Parts 16 [Link]
BUSHMASTER Lower Receiver Parts & Kits... Field Repair Kit... High breakage and loss
Complete Lower Receiver Parts Kit… Everything items in a heavy zip-lock bag. Will fit in Stowaway Grip.
necessary to completely build up your Lower Receiver. Includes extractor, 2 extractor springs, 2 extractor spring
Kits available with either AR15 or M16* components. insert, disconnector, gas ring set, extractor pivot pin, firing
(Lower Receiver And Auto Sear are not included). pin, 2 firing pin retaining pins, cam pin and spring package
AR15 Lower Parts Kit … (ALOW KIT) $69.50 of 6 springs. For AR-15…
M16 Lower Parts Kit*… (MLOW KIT) $69.50 (A FIELD) $31.95
or M-16*…
(M FIELD) $31.95
*NOTE: M16 Parts are
NOT Legal for Sale in
California.
XM15/AR15/M16 Emergency Survival Kit... With
more parts than our Field Repair Kit above, the Survival Kit
is packed in a belt mountable Olive Drab Carrying Case.
(case dimensions approx. 9.25” x 3.5”). Kit includes Cam
Pin, Extractor with 2 Pins and 2 Springs, Extractor Insert,
Firing Pin, 2 Firing Pin Retaining Pins, Disconnector and
Spring, Hammer with “J” Pin and Spring, Hammer Pin,
Trigger Pin, Trigger Spring, Safety Detent and Spring,
*NOTE: M16 parts require FFL or MG Tax Stamp. Magazine Catch Springs, Gas Rings (3), Sight Adjustment
M16 Parts are NOT Legal for Sale in California. Tool, and 2 Armorers Punches for Field Disassembly.
DCM Competition Complete Lower Receiver
Parts Kit… (ALOWKITCOMP) $170.95 All parts shown
above plus our Adjustable Two Stage Competition
Trigger - save $25 over separately purchased parts.
Bushmaster Competition Trigger - For the Serious
High Power Competitor… (8448592-SCGK) $127.95
A finely honed competition trigger including all the
specially modified parts shown - ready for installation in Specify with part numbers below: A1 Type:
your Lower Receiver. This Trigger can be set for a 3 1/2 lb. (Round Front Sight Post) or A2 Type: (Square Front Sight
DCM legal 1st Stage, Post) and AR15 (AR) or M16 (M) parts. (Note: M16
and a 1 lb. (2nd Stage) parts require an FFL or Form 4 for purchase.)
letoff. Also available… Survival Kit w. A1 Sight Tool… $63.95
Two Stage Competition (for AR15 - AR EMERG A1 / for M16 - M EMERG A1)
Trigger w. Ambidextrous Survival Kit with A2 Sight Tool… $63.95
Safety… $148.95 (for AR15 - AR EMERG A2 / for M16 - M EMERG A2)
(8448592-SCGKA) Bushmaster BA50 Field Repair Kit… (BMG FIELD)
NOTE: This Trigger will $74.95 All necessary parts for emergency field repairs
not fit in Colt Lowers with Block on the new Bushmaster BA50 .50 BMG Caliber Rifle
over Safety. Won't work with and Carbine. Kit includes: Firing Pin Assembly; Extractor
Large Colt Pivot Pins. and Ejector Parts; Hammer Spring; and other critical
springs, pins, screws, bearings, etc.- 15 parts in all.
The “Lost” Parts Kit for AR15 Type Rifle…
Bushmaster Receiver Spring Package… $2.95
(CP-KIT) $13.50 The first problem with AR15
maintenance and gunsmithing work is the little spring (SM SPRING PACK) Tighten up your Receiver’s action
or detent that pops out and falls into that black hole with this top quality Bushmaster
under the workbench! This Parts Kit - of all the most Spring Kit. Includes Springs for
critical springs, detents, inserts and pins - will get your Hammer; Trigger, Ejector,
gun back to full function in short order. Extractor, Magazine Catch and
Includes: 4 Takedown Pin Detents; 4 Takedown Pin Disconnector.
Detent Springs; 2 Buffer Complete AR15/M16 Pin & Detent Package…
Retainers; 2 Buffer (AR PIN PKG) $7.50 Includes every pin and detent in
Retainer Springs; 2 the gun – a $13 value if sold separately. Contains: 2
Firing Pin Retaining Hammer/Trigger Pins; 2 Front Sight Taper Pins; Firing Pin
Pins; 2 Safety Detents; 2 Retaining Pin; 2 Takedown Pin Detents; Safety Detent;
Safety Detent Springs; 2 Bolt Catch Plunger; Extractor Pin; Gas Tube Roll Pin;
Extractor Spring Inserts; Front Sight Detent; Ejector Pin; Forward Assist Pin; Bolt
2 Extractor Springs. Catch Pin; Buffer Detent; Trigger Guard Pin.
Bushmaster Receivers & Parts 17 Orders – 1 800 998 7928
BUSHMASTER Lower Receiver Parts & Kits...
MagPul Enhanced Aluminum Trigger
Guard for AR15/M16 (MAG015) $19.95
A drop-in oversized trigger guard that
replaces the standard plastic or metal type,
this hard anodize finished piece offers
greater access to the trigger (especially when
using gloves), reduces chance of accidental discharge, and fills the blister
causing gap between the receiver tabs. Installs with a replacement roll pin and
a 1/16” Allen Head set screw. Made in U.S.A. / Instructions included.
Complete AR15 Spare Parts Kit... $39.50 We've taken our Field Repair Kit, our
Complete Spring Package, and our Complete Pin & Detent Package and combined them
into one “super-kit” that will take care of all your AR15 rifle’s spare parts needs. You'll get
all these parts and more: every Spring in the Gun (including Buffer Spring); Firing Pin; 3
Firing Pin Retaining Pins; Cam Pin; Disconnector; Extractor; Extractor Pivot Pin; 2 Extractor
Spring Inserts; Gas Ring Set; 2 Hammer & Trigger Pins; 2 Front Sight Taper Pins; 2 Takedown
Pin Detents; Safety Detent; Bolt Catch Plunger; Gas Tube Roll Pin; Front Sight Detent;
Ejector Pin; Forward Assist Pin; Bolt Catch Pin; Buffer Detent; Trigger Guard Pin. This is a
great value for only $39.50! (Note: If you have our Fixed Length Tele-Stock, please choose
the Rifle Buffer Spring Package. AR15 or M16* Ambidextrous Safety Selector...
Not all parts are shown, and Don't be penalized for being left handed any longer.
not shown to correct scale.) Installs easily into your lower receiver
Specify your choice of: and enables activation of the rifle with
Complete AR15 Spare Parts Kit either hand. Assembles with a button head
Parts Kit w. Rifle Buffer Spring Allen Screw. For the M16 part, an FFL, or a
(ARPARTSKIT) ... $39.50 copy of your Form 4 is required for sale.
OR AR15 (MMT-0007K) $36.95
Complete AR15 Spare Parts Kit M16* (MMT-0006K) $36.95
Parts Kit w. CAR Buffer Spring *M16 Parts are NOT Legal in California.
(ARPARTSKIT-C)... $39.50 Ambidextrous Safety Selector for Carbon 15
Complete Spring Package... $10.50 Every spring Rifles… (AZ724) $33.50 For Type 21 or 97 Rifles and
in the gun, including the Buffer Spring. Please specify if Pistols – machined of aircraft quality aluminum. Right
for Telestocked Carbine (A COMP SPR PKG-C), or side operating lever molded of Carbon 15 composite.
Standard A2 Solid Stock (A COMP SPR PKG). Right Side Operating Lever Only… (AZ724) $11.95
AR15/M16 Accu-Wedge... (ACU1B) $6.50 Ambidextrous Magazine Release… $95.95
Accu-Wedge eliminates play between Upper and Lower (8448638-ambi) Release magazines from either side of the
Receivers for a more solid feel. Buffers the cycling receiver - especially handy
system to reduce wear on the impacting surfaces. Easily for lefties. This well made
assembly is an easy replacement for
installed, no modifications required. Drop
your stock magazine release - uses stock
the Accu-Wedge into the rear of the Lower button and spring. No receiver modification
Receiver - close the Upper Receiver, required, the design reduces the possibility of
squeeze, and accidental release, and helps keep out sand
push the and mud. All steel construction with a mil.
Takedown Pin spec. phosphate finish. Made in U.S.A.
into place.
Expandable Tensioning Pin For All AR15 Type
AR-AR Push Pin… (OAK-01) $10.95 Replaces Rifles... (ARTP) $36.95 A pin designed to cure a loose fit
the big two-screw bolt in the front pivot hole on Colt between older upper and lower receivers. Install and
receivers (will only fit Colt Sporters). tighten with an Allen wrench, and this precision pin pulls
Converts receiver to standard the upper receiver down onto the lower for a rock hard
takedown operation - as on the custom fit. Improves
military version. accuracy in the poorest
Anti-Walk Pins… for XM15, AR15 and M16... fitting receivers.
Set of Two Pins with Circlips… (WE-002) $6.50 Reverse Offset Pin… $16.95
Designed to prevent trigger or sear (WE-003) Allows mounting a Colt
pin walkout under rapid Upper Receiver with large pin
fire conditions. Steel with holes to a mil. spec. (small hole)
black phosphated finish. push pin type Receiver.
Bushmaster Receivers & Parts 18 [Link]
BUSHMASTER Lower Receiver Parts & Kits...
Offset Pin… $6.50 M16*A2 Three Shot Burst Set… $63.95 (3
(NES-06) Adapts a Colt SHOT BURST KIT) Installation of this set in
Lower Receiver (with large your M16A1 machine gun will give you a Three
hole) to M16 Forward Shot Burst capability as in the M16A2. New,
Assist type Upper Receiver highest quality parts. An FFL is required for
with smaller hole. sale, or a copy of your Form 4. Not legal for
installation in anything but a licensed machine gun.
*M16 Parts are NOT Legal for Sale in California.
Quick-Pull Takedown Pin for Carbon 15 Top Loading M16* Full Auto Sear…
Carbine… (AZC-15120) $3.95 Makes opening the Receivers (8448595) $31.95 Includes
of the Top Loading Carbine easier and faster – a Pivot Pin, Bushing and Spring.
sling swivel, a split ring or piece of Note: An FFL or Tax Stamp is
paracord can be attached for a better grasp. required for purchase.

Individual Lower Receiver Parts for Late AR15 or M16* “Re-hab” Kit… Hammer,
Model COLT AR15s… These are the hard to Trigger, Safety Selector and AR15
find parts for the late model Colts requiring the Disconnector. NOTE: M16 Disconnector AR15
larger .172" diameter Hammer and Trigger Pins. Kit must be used in a Title Safety Selector
Hammer… (8448612-SCK) $23.50 II Receiver for legality – an
Trigger… (8448592-SC) $21.50 FFL or Tax Stamp is
Disconnector… (8448635-SC) $7.50 required for sale.
For Semi-Auto AR15, AR15 Trigger
Hammer or Trigger Pin… (8448609 C) $3.50 AR15
(A REHAB) $35.95 Hammer
For All 5 Parts in a Kit - Hammer; Trigger; For Full-Auto M16, (M REHAB) $35.95 complete
Disconnector (Semi-auto); Hammer and Trigger *Note: M16 Parts are NOT Legal
Pins… (AR COLT KIT) $53.95 for Sale in California.
A STATEMENT FROM BUSHMASTER REGARDING MACHINEGUN PARTS
The position of the Bureau of Alcohol, Tobacco and Firearms (ATF) is that if your AR15 type rifle contains even
one M16 component, it is a Machine Gun. If you own an AR15 from any manufacturer, check to make sure there
are no M16 components in it’s assemblies. If there are, remove them immediately. Machine them to AR
configuration, or replace them and destroy the M16 components. Refer to the illustrations below to determine if
you have M16 components in your assemblies. If you have any questions about your parts, give us a call and
we’ll be glad to supply you with the legally acceptable parts.
Sales of M16 components by Bushmaster Firearms International, LLC will only be made to the
following categories of customers: (1) Class 3 (NFA) Dealer, (2) Individual who has a registered NFA
weapon, (3) Federal Firearms Licensee with a customer who has a registered NFA weapon.

Note the Differences* Between the Corresponding Parts in Each Drawing

AR15 PARTS M16 PARTS
Hammer with J pin 8448612-SK Hammer with J pin 8448612K

Safety
Safety Selector
Selector Lever
Lever 9381367
Note “closed” area 9381367-S Note “open” area
Trigger Trigger
8448592-S 8448592

Disconnector Disconnector
9349114-S 8448635

Bolt Carrier Bolt Carrier

8448507-S 8448507

Bushmaster Receivers & Parts 19 Orders – 1 800 998 7928

BUSHMASTER Upper Receiver Parts... A fully assembled, Chrome Lined Bolt Carrier with Key
Bushmaster Complete Bolt & Bolt Carrier staked on - and all parts illustrated here. Includes Bolt
Assembly… $137.95 each Assembly and Firing Pin. Ready to use in your rifle, or
For AR15… Part # 8448501-S keep as backup.
For M16*… Part # 8448501

*NOTE: M16 Parts are NOT Legal for Sale in California.

AR15 or M16 Bolt Carrier Assembly with Key Staked on... $92.50 each These are new bolt carriers
machined of highest quality gun steel - not rewelds or remakes - and they are chrome lined for smooth bolt
functioning and long life. The bolt carrier assembly is the “heart” of your rifle - with the most critical machining
tolerances of any component in the weapons system. We manufacture to mil. spec. or better, and magnetic particle
inspect to insure against cracks or flaws that could cause catastrophic failure or injury.
For AR15… $92.50 (8448505-S)
For M16*… $92.50 (8448505)
NOTE: M16 Bolt Carriers
must be used in Title II
Receivers for legality.
An FFL or Tax Stamp is required for purchase. *NOTE: M16 Parts are NOT Legal for Sale in California.
AR15 or M16 Bolt Carrier without Key… $78.95 each Same quality Chrome Lined Carrier as shown above,
but without the Carrier Key for
the “do it yourselfer”.
AR15… $78.95 (8448507-S)
For M16*… $78.95 (8448507)
CAUTION: Bolt Carrier Keys must be “staked” onto the Carrier for safe and proper functioning in your rifle. See
next page to purchase Carrier Key. For information on this procedure, or any AR15 assembly/disassembly work, we
recommend the Bushmaster Video or the U.S. Government M16 Technical Manual (see Gunsmithing Section).
*NOTE: M16 Parts are NOT Legal for Sale in California.
Complete AR15 Bolt Assembly... $56.00 (8448509) Includes Bolt, Extractor Assembly, Pins, Gas Rings,
Ejector Assembly – all highest quality parts completely
assembled, and ready for use in your rifle.
AR15 Bolt Assembly
Parts detail illustration…

Forward Assist Assemblies… $21.50 ea. Ejection Port Cover Assembly… $12.95
“Teardrop” or Round Style… (A EJ COV ASS) Manganese Phosphate finished in matte
Quality assemblies are machined grey/black color to match hard anodized uppers. All new
from 4140 ordinance steel - heat parts including
treated to avoid gouged bolt carrier Cover with Latch,
problems or wear on the pawl tip - Rod, Spring and
Manganese Phosphate finished. Circlip.

Teardrop Style… (9349086-TD KIT) Bolt Carrier Rebuild Kit… Bring your Bolt Carrier
Round Style… (9349086 KIT) $21.50 ea. Assembly back up to new specifications. Includes all parts
Bolt Cam Pin… $4.50 (8448502) This shown to rebuild your Bolt and Carrier. $37.95 each
quality replacement pin is critical to the For AR15… (A BC REBUILD)
M16*… (M BC REBUILD)
safe functioning of your AR type rifle. These
are machined of hardened steel to military *NOTE: M16 Parts
specs. or better, then Manganese Phosphated are NOT Legal
for protection against rust or corrosion. for Sale in California.
WARNING: Key must be
Titanium Firing Pin… $42.50 (13-7015) Titanium is staked onto Carrier
40% lighter than steel for faster lock time, and greater
accuracy. This patented, precision machined pin improves Chromed Steel Firing Pin… A standard, mil. spec.
safety by reducing the possibility of a “slam fire”. This Firing Pin for the AR15 or M16. Keep a spare in the
pin fits either AR15 or M16 - gold finished to distinguish buttstock compartment. For AR15… (8448503-S) $7.50
it from std. pins. For M16… (8448503) $7.50

Bushmaster Receivers & Parts 20 [Link]

Bushmaster Upper Receiver Parts… AR15/M16 Charging Handle Tactical Latch...
Charging Handle Assembly… (8448517) $26.50 (1005-249-02) $21.95 Sturdy steel construction –
These are not steel stampings that might bend or improves on the standard charging handle latch and
distort from heat buildup. Precision machined from allows easy weapon charging, or left handed operation
7075T6 aircraft quality aluminum forgings, they are when using a scope or other optics.
hard anodize finished per U. S. mil. spec. – Installation is a simple
with spring loaded latch installed. replacement – don't lose your
existing latch spring or pin when
you change over to this latch on
your charging handle.
Enidine Hydraulic Buffer – Rate Reducer… A drop-in replacement for standard buffers - with units designed
for either rifles or carbines. This rugged “shock absorber” will add reliability to your AR, reduce felt recoil, improve
accuracy and protect your optics from excessive shock. For Full
Auto guns, they’ll bring firing rate down to a very manageable
level, and smooth out the functioning of the gun. Bushmaster
installs them in our short barreled Full Auto models. Quality alloy
steels with a black oxide finish; For Carbines (HB-1A)
action rod is nickel plated for
smooth operation. Rear “bumper”
is molded black polyurethane.
For Rifles (HB-2A)
Enidine Hydraulic Buffer – Rate Reducer for Carbines… (HB-1A) $ 89.95 / For Rifles… (HB-2A) $ 99.95
Need help identifying Parts? See Pages 40/41 for a Complete Parts Schematic Diagram.
INDIVIDUAL PARTS FOR LOWER RECEIVERS… Pivot Pin Spring (8448586) ................................... .55
Bolt Catch Assembly (A BCAT ASS) ................ $6.50 AR15 Safety Selector (9381367-S) ............... $10.95
Bolt Catch (8448628) ....................................... $5.50 M16 Safety Selector* (9381367) ................. $10.95
Bolt Catch Spring (8448633) ............................... .55 Safety Detent (8448631) .................................. $1.00
Bolt Catch Plunger (8448634) ............................. .55 Safety Detent Spring (8448516) ....................... .85
Bolt Catch Pin (MS16562-119) ............................. .55 Take Down Pin (Rear) (8448584) .................. $4.20
Buffer Detent (8448582) ................................. $1.60 Take Down Pin Detent (8448585) ..................... .55
Buffer Detent Spring (8448583) ........................ .55 Take Down Pin Spring (8448586) ...................... .55
AR15 Disconnector (9349114-S) .................... $5.95 Trigger for M16* (8448592) .......................... $11.95
M16 Disconnector* (8448635) ....................... $5.95 Trigger for AR15 (8448592-S) ........................ $11.95
Disconnector Spring (8448594) .......................... .55 Trigger w. Spring for AR15 (9349115-S) ... $12.95
AR15 Hammer w. J pin (8448612-SK) ......... $14.95 Trigger Spring (8448593) ................................. $1.00
M16 Hammer w. J pin* (8448612-K) ........... $14.95 Trigger Guard Assembly (8448587) ............. $5.50
Hammer Pin (8448609), Trigger Pin (8448609), or Trigger Guard Roll Pin (MS16562-35) ................ .55
Sear Pin (8448599) each… ................................ $1.00 Buffer - Standard (8448615) ...................... $15.95
Hammer Spring (8448611) ............................. $1.00 Buffer Spring - Standard (8448629) ........... $5.95
Magazine Catch Assembly (A MC ASS) ........ $4.95 Receiver Extension - Std. A2 (8448581) ... $21.95
Magazine Catch (8448638) .............................. $3.50 Buffer - Telestock (1005-914-4578) ............ $16.95
Magazine Catch Button (8448636) ............... $1.50 Buffer - Telestock - heavy weight for M16M4
Magazine Catch Spring (8448637) .................... .55 machine gun) (8448730-M) ........................ $26.50
Pistol Grip A2 (9349127) .............................. $12.95 Buffer Spring - Telestock (1005-914-4564) ... $5.50
Pistol Grip Screw (AN501D416-18) .................... .65 CAR Receiver Extension - for the newer style 6
Pistol Grip Screw Washer (MS35335-61) ......... .45 Position Telestocks ........ (1005-914-2929-6) $26.50
Pivot Pin (Front) (8448621) .............................. $4.20 CAR Receiver Extension - for older style 4
Pivot Pin Detent (8448585) .................................. .55 Position Telestocks ........ (1005-914-2929-P) $26.50
*NOTE: M16 Parts are NOT Legal for Sale in California.
INDIVIDUAL PARTS FOR UPPER RECEIVERS… Extractor Assembly (A EXTRAC ASS) .......... $14.95
Extractor (8448512) .................................. $13.95
Bolt Cam Pin (8448502) ............................ $4.50
Extractor Pin (8448513) .............................. $1.00
Bolt Carrier Key with screws/must be staked
Extractor Spring (8448755SP) ....................... $1.50
(AR BC KEY/SCREW) ...................................... $15.95 Extractor Spring Insert (8448754) .................. .80
Bolt Gas Rings (set of 3) (8448511K) .......... $3.15 Firing Pin (8448503 or 8448503-S) ................. $7.50
Ejector Assembly (A EJECT ASS) ................ $3.50 Firing Pin Retaining Pin (8448504) ............. $1.00

Bushmaster Receivers & Parts 21 Orders – 1 800 998 7928

Bushmaster Upper Receiver / Barrel Assemblies…
Swap them out as needed on your Lower Receiver to appreciate the versatility designed into the
Bushmaster System! Bushmaster Upper Receiver/Barrel Assemblies offer the benefit of years of AR15/M16
design, materials and finish improvements. Either our Chrome-Moly Vanadium Steel Barrels with hard chrome
lining in both bore and chamber, or our Stainless Steel Barrels, are the finest available. The latest M16A2 sight
systems; integral brass deflectors and hard anodize finish are incorporated into the receivers. These assemblies
are all factory headspaced, test fired, and shipped completely ready to use. They include charging handle, bolt
and bolt carrier assemblies, handguards and forends. They can also be purchased without charging handle, bolt
and bolt carrier assemblies if you already have those parts in another rifle. Just swap them over – that’s the
beauty of the Bushmaster weapons system.
These photos show only a few of the various way Bushmaster Upper Assemblies can be configured. A
complete listing of all Bushmaster Upper Receiver/Barrel Assemblies can be found on the next pages, and photos
of all our Assemblies are on the web at [Link]. This catalog offers many different barrels,
handguards, sights and other “AR” accessories that can be assembled to your specifications. Whether the choice
is Aluminum or Carbon Fiber; 3-Gun Match or Varmint Hunting; DCM Highpower Competition or backyard
plinking; the Bushmaster Sales Team is ready to help you build the Upper Receiver configuration you want.

Part # BURA2B 16M4

A2 Upper with Solid Fixed Carry Handle

This example is an A2 Patrolman’s Carbine Upper with

Ribbed Handguards, A2 Front Sight and 16” M4 Profile Barrel.

Part # BURA3B 16SL

A3 Upper with Removable Carry Handle

This A3 Superlight Upper includes the A3 Handle, Ribbed

Handguards, A2 Front Sight and 16” Superlight Barrel.
Part # BURVMB 16-45 “Flat-top” (no carry handle - save $100)

This .450 flat-top example includes V-Match Free-Floating

Forend, 3 Rail Gas Block and 16” Heavy Barrel with Izzy Brake.
Part # PURVMB 24FVAR9
Varminter / Predator

With Optics Riser Blocks, this Varminter

offers a Vented, Freefloat Forend with Bipod Stud,
Part # BURVMB 16FMC a Milled Gas Block and 24” Fluted Barrel.
Uppers Accessorized To Suit Your Needs

Modular Carbine Upper shown here includes a Flat-top

V-Match Upper with Flip-Up Rear Sight; 16” Fluted Barrel; a Four
Rail Free-float Forend with Rail Covers and Bipod Stud, a Milled Gas Block with Flip-Up Front Sight.
OPTIONS… when ordering Bushmaster Upper Receiver/Barrel Assemblies:
For Fluting - available on most Bushmaster barrels (Some exceptions. Add F as suffix to Part #) Add $50.00
On A3 “Flat-top” Upper Receiver Assemblies, the A3 Removable Carry Handle (Part # 9349063-9) is usually included.
If you are adding a scope or other optics, and don’t want the A3 Removable Carry Handle, you can.... Deduct $100.00
For Assemblies with V Match Round Aluminum Free-floater Forend ........................... (SGW-01/02) Add $45.00
For Assemblies with Varminter Vented Aluminum Free-floater Forend ........................... (VAR-01K) Add $75.00
See the Muzzle Brakes / Flash Suppressors Section of this catalog for details on the wide variety available.

Izzy Compensator A2 Birdcage Y Comp Mini Y Comp AK Brake Phantom

A Caution for our Customers: When the “Assault Weapons Ban of 1994” expired on Sept. 13th, 2004, it
became legal to again offer features on the AR15 type rifle such as flash suppressors, bayonet lugs, telestocks, and high
capacity magazines, that had been deemed illegal for those previous 10 years. Though that Federal Legislation has
expired, certain States have retained their own versions of “Assault Weapons Ban” Statutes. Buyers should check their
own State and County laws to determine the local legality of rifles or parts with these features and accessories.
Upper Receiver/Barrel Assemblies 22 Orders – 1 800 998 7928
Bushmaster Upper Receiver/Barrel Assemblies…
Complete and ready for the Range when assembled onto your Lower Receiver.
.450 Bushmaster Cal. Upper Assemblies… (include Free-Float Forends and 5 Round .450 specific Magazine)
20” Rifle Upper shown

Bushmaster .450 - 20” Bbl. Rifle Upper Rec. Assembly … (BURVMB 20-45) $770.00
1 X 24 Twist, Chrome Lined Heavy Barrel – flat-top Upper / milled gas block / no sights – with one .450 mag.
Bushmaster .450 - 16” Bbl. Carbine Upper Rec. Assembly … (BURVMB 16-45) $760.00
1 X 24 Twist, Chrome Lined Heavy Barrel – flat-top Upper / 3 rail gas block / no sights – with one .450 mag.
6.8mm SPC Cal. Upper Assemblies… (fits standard lower – includes a 26 Round 6.8mm specific Magazine)

A3 Upper shown

Bushmaster 6.8mm SPC - 16” Bbl. A3 Carbine Upper Rec. Assembly … (BURA3B 16M468) $760.00
1 X 10 Twist, Chrome Lined M4 Profile Bbl. w. Izzy Suppr. – A3 Handle / Flat-top Upper / A2 Front Sight – 6.8mm mag.
Bushmaster 6.8mm SPC - 16” Bbl. A2 Carbine Upper Rec. Assembly … (BURA2B 16M468) $660.00
1 X 10 Twist, Chrome Lined M4 Profile Bbl. w. Izzy Suppr. – A2 Solid Handle Upper / A2 Front Sight – 6.8mm mag.
5.56mm/.223 Caliber Gas Piston Upper Assemblies… Clean running reliability for the AR system with ease
of maintenance – includes BMAS Flip-up Front Sight
A3 Gas Piston Upper shown and Rail Segments for accessory mounting.

NOTE: Gas
Piston Bolt
Carrier (included) cannot be interchanged with std. AR Carrier
Bushmaster 5.56m/.223 Caliber A3 Gas Piston Upper Receiver Assembly … (BURA3B 16M4-GP) $1095.00
1 X 9 Twist, Chrome Lined M4 Profile 16”Bbl. w. A2 Birdcage – A3 Handle on Flat-top Upper / Flip-up Front Sight
Bushmaster 5.56m/.223 Caliber A2 Gas Piston Upper Receiver Assembly … (BURA2B 16M4-GP) $995.00
1 X 9 Twist, Chrome Lined M4 Profile 16”Bbl. w. A2 Birdcage – A2 Solid Carry Handle / Flip-up Front Sight
Varminter/Predator .223 Cal. Upper Assemblies… with Fluted, Non Chrome Lined Barrels, Vented Free-Float
Forends and Scope Risers on a Flat-top Upper.

Predator Upper shown

Bushmaster Predator .223 Caliber Fluted Upper Receiver Assembly … (PURVMB 20FPRED8) $750.00
1 X 8 Twist, Non-Chrome Lined, Fluted Extra Heavy 20”Bbl. with 11° competition crowned muzzle and milled gas block
Bushmaster Varminter .223 Caliber Fluted Upper Receiver Assembly … (PURVMB 24FVAR9) $760.00
1 X 9 Twist, Non-Chrome Lined, Fluted Extra Heavy 24”Bbl. with 11° competition crowned muzzle and milled gas block
Stainless Varmint Special .223 Cal. Upper Assembly… with Heavy, Stainless Steel, Non Chrome Lined
Barrel, Vented Free-Float Forend and Scope Risers on a Flat-top Upper.

Stainless Varmint Special .223 Caliber Upper Receiver Assembly … (PURVMB 24-9SS) $760.00
1 X 9 Twist, Non-Chrome Lined Stainless Steel Heavy 24”Bbl. with milled gas block
Varmint Special Upper without Bolt, Carrier Assembly and Charging Handle… $610.00 (PURVM 24-9SS)
Modular Carbine Upper Rec./ Barrel Assembly… Completely accessorized, see photo on previous page
Bushmaster Modular Carbine .223 Caliber Upper Receiver Assembly … (BURVMB 16FMC) $960.00
1 X 9 Twist, Fluted, Chrome Lined ChroMoly Steel 16”Bbl. with Milled Gas Block, Flip-up Sights, 4 Rail Forend w. Rail
Covers and BiPod/Sling Stud, Flat-top Upper Receiver complete with Bolt, Carrier, Charging Handle and Forward Assist.
Also Available without Bayonet Lug or Suppressor (has Crowned Muzzle)… (PURVMB 16FMC) $960.00
For further information… on all these complete Upper Assemblies, see [Link] or check the
complete rifle descriptions. The Bushmaster Sales Team is available 8:30 AM – 7:00 PM at 1-800-998-7928.
Upper Receiver/Barrel Assemblies 23 [Link]
Bushmaster Upper Receiver/Barrel Assemblies…
Complete and ready for the Range when assembled onto your Lower Receiver.
Bushmaster Upper Assemblies with ARMS S.I.R. System… Bushmaster offers a variety of complete
Upper Receiver/Barrel Assemblies incorporating the ARMS S.I.R. System - all installed and ready for use. Consult your Bushmaster
Bushmaster 14.5” Bbl. M4 Salesperson for further information and pricing. See additional ARMS S.I.R. Systems
Upper with ARMS S.I.R. System in the Handguards Section of this catalog.
(Model 50M-CV) ... $980.00

Bushmaster Carbon 15 .223 Cal. Upper Receiver/Barrel Assembly… Features a Carbon 15

Composite Upper Receiver with aluminum Picatinny Rail; 16” M4 profile Chrome Lined Barrel with Izzy Compensator; A2 Front Sight
with square post (elevation adjustable); and Carbine Length Handguards –
complete with Bolt, Carrier and Charging Handle. Carbon 15 “Flat-top” Upper Receiver
Barrel Assembly… (AZ15676) $605.00

Same “Flat-top” Upper Assembly less Bolt, Carrier and Charging Handle… (AZ15722) $455.00
Also, Carbon 15 “Model 4” Upper Receiver/Bbl. Assembly… (AZ15748) $625.00 Similar to Flat-top above,
14.5” M4 Barrel w permanent Izzy Compensator, Raised Picatinny Rail and Integral Dual Aperture Rear Sight.
Same Carbon 15 “Model 4” Assembly Less Bolt, Carrier & Charging Handle… (AZ15746) $475.00
A3 Assemblies below can be ordered without A3 Carry Handle – deduct $100 from A3 price.
Bushmaster 14.5” M4 Upper Receiver/Barrel Assemblies… .223/5.56mm cal. 14.5” Chrome Lined
M4 profile Barrels with permanent Izzy Flash
M4A3 Upper shown Suppressor. Total barrel length just over 16”
makes this a BATF legal assembly.

M4A3 .223 Caliber Upper Receiver/Bbl. Assembly … (BURA3B 14.5M4 IZ) $705.00
1 X 9 Twist, Chrome Lined M4 Profile Bbl., A2 Front Sight, Forged Flat-top Upper with A3 Removable Carry Handle
Same M4A3 Assembly less Bolt, Carrier and Charging Handle… (BURA3 14.5M4 IZ) $555.00
M4A2 .223 Caliber Upper Receiver/Bbl. Assembly … (BURA2B 14.5M4 IZ) $605.00
1 X 9 Twist, Chrome Lined M4 Profile Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same M4A2 Assembly less Bolt, Carrier and Charging Handle… (BURA2 14.5M4 IZ) $455.00
Bushmaster 16” M4 Patrolman’s Carbine Upper Receiver/Bbl. Assemblies… 223./5.56mm cal.
16” Chrome Lined M4 profile Barrels with A2 Birdcage Suppressor on a threaded muzzle (1/2” x 28 T.p.I.).
16” A3 Patrolman’s Carbine Upper Receiver/Bbl. Assembly … (BURA3B 16M4) $675.00
1 X 9 Twist, Chrome Lined M4 Profile Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same Patrolman’s Carbine Assembly less Bolt, Carrier and Charging Handle… (BURA3 16M4) $525.00
16” A2 Patrolman’s Carbine Upper Receiver/Bbl. Assembly … (BURA2B 16M4) $575.00
1 X 9 Twist, Chrome Lined M4 Profile Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same Patrolman’s Carbine Assembly less Bolt, Carrier and Charging Handle… (BURA2 16M4) $425.00
Bushmaster 16” Dissipator Carbine Upper Receiver/Bbl. Assemblies… 223./5.56mm cal. 16”
Chrome Lined Heavy Barrels with rifle length handguards and full sight radius, A2 Birdcage Suppressor
16” A3 Dissipator Carbine Upper Receiver/Bbl. Assembly … (BURA3B 16D) $685.00
1 X 9 Twist, Chrome Lined Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 16” A3 Dissipator Assembly less Bolt, Carrier and Charging Handle… (BURA3 16D) $535.00
16” A2 Dissipator Carbine Upper Receiver/Bbl. Assembly … (BURA2B 16D) $585.00
1 X 9 Twist, Chrome Lined Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 16” A2 Dissipator Assembly less Bolt, Carrier and Charging Handle… (BURA2 16D) $435.00
Note: These Barrel Assemblies can be ordered without bayonet lug or suppressor for use in
States with those restrictions. Change Part #s from BUR... to PUR... No change in prices.
Upper Receiver/Barrel Assemblies 24 Orders – 1 800 998 7928
Bushmaster 14” Upper Receiver/Bbl. Assemblies with “AK” Muzzle Brake… .223/5.56mm
cal. 14” Chrome Lined Heavy Barrels with permanently attached AK Muzzle Brake, standard 2 Piece CAR Handguard.
14” A3-AK Carbine Upper Receiver/Bbl. Assembly … (BURA3B 14.5AK) $685.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 14” A3-AK Assembly less Bolt, Carrier and Charging Handle… (BURA3 14.5AK) $535.00
14” A2-AK Carbine Upper Receiver/Bbl. Assembly … (BURA2B 14.5AK) $585.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 14” A2-AK Assembly less Bolt, Carrier and Charging Handle… (BURA2 14.5AK) $435.00
Bushmaster 16” Heavy Upper Receiver/Bbl. Assemblies… .223/5.56mm cal. 16” Chrome Lined
Heavy Barrels with A2 Birdcage Flash Suppressor, standard 2 Piece CAR Handguard.
16” Heavy A3 Carbine Upper Receiver/Bbl. Assembly … (BURA3B 16) $665.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 16” Heavy A3 Assembly less Bolt, Carrier and Charging Handle… (BURA3 16) $515.00
16” Heavy A2 Carbine Upper Receiver/Bbl. Assembly … (BURA2B 16) $565.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 16” Heavy A2 Assembly less Bolt, Carrier and Charging Handle… (BURA2 16) $415.00
Bushmaster 16” SuperLight Upper Receiver/Bbl. Assemblies… .223/5.56mm cal. 16” Chrome
Lined SuperLight (orig. Viet Nam era profile) Barrels with A2 Birdcage and standard 2 Piece CAR Handguard.
16” SuperLight A3 Carbine Upper Receiver/Bbl. Assembly … (BURA3B 16SL) $675.00
1 X 9 Twist, Chrome Lined SuperLight Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 16” SuperLight A3 Assembly less Bolt, Carrier and Charging Handle… (BURA3 16SL) $525.00
16” SuperLight A2 Carbine Upper Receiver/Bbl. Assembly … (BURA2B 16SL) $575.00
1 X 9 Twist, Chrome Lined SuperLight Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 16” SuperLight A2 Assembly less Bolt, Carrier and Charging Handle… (BURA2 16SL) $425.00
Bushmaster “V Match” 16“/20”/24“ Upper Receiver/Bbl. Assemblies… .223/5.56mm cal.
Chrome Lined 1 X 9 Twist Heavy Barrels with A2 Birdcage Suppressor, Flat-top Forged Upper, and Free-Float Tubular
Aluminum Forends. V Match Upper Assemblies do not include iron sights. The A3 Carry Handle will clamp onto the
Picatinny Rail, or other Flip-up Front and Rear Sights are easily mounted (see Sights & Scopes Section of this Catalog).

20" Bbl. V Match Rifle Upper

16” V Match Carbine Upper Receiver/Bbl. Assembly … (BURVMB 16) $605.00
Same 16” V Match Carbine Assembly less Bolt, Carrier and Charging Handle… (BURVM 16) $455.00
20” V Match Rifle Upper Receiver/Bbl. Assembly … (BURVMB 20AH) $605.00
Same 20” V Match Rifle Assembly less Bolt, Carrier and Charging Handle… (BURVM 20AH) $455.00
24” V Match Rifle Upper Receiver/Bbl. Assembly … (BURVMB 24AH) $615.00
Same 24” V Match Rifle Assembly less Bolt, Carrier and Charging Handle… (BURVM 24AH) $465.00
Bushmaster 20”/24“ National Match Target Upper Rec./Bbl. Assemblies… .223/5.56mm,
Heavy, 1 X 9 Twist Barrels with A2 Birdcage Suppressor in either Chrome Lined ChroMoly or Stainless Steel, A2 Front
Sight and Ribbed, Heat Shielded, Rifle
20" Bbl. National Match Target Upper Assembly Handguards.

20” A3 Match Target Upper Receiver/Bbl. Assembly - with A3 Carry Handle … (BURA3B 20) $665.00
Same 20” A3 Match Target Assembly less Bolt, Carrier and Charging Handle … (BURA3 20) $515.00
20” A2 Match Target Upper Receiver/Bbl. Assembly - Solid Carry Handle … (BURA2B 20) $565.00
Same 20” A2 Match Target Assembly less Bolt, Carrier and Charging Handle … (BURA2 20) $415.00
24” A3 Match Target Upper Receiver/Bbl. Assembly - with A3 Carry Handle … (BURA3B 24) $675.00
Same 24” A3 Match Target Assembly less Bolt, Carrier and Charging Handle … (BURA3 24) $525.00
24” A2 Match Target Upper Receiver/Bbl. Assembly - Solid Carry Handle … (BURA2B 24) $575.00
Same 24” A2 Match Target Assembly less Bolt, Carrier and Charging Handle … (BURA2 24) $425.00
20” A3 Stainless Match Target Upper Rec./Bbl. Assembly - with A3 Handle … (BURA3B 20SS) $715.00
Same 20” A3 Stainless Assembly less Bolt, Carrier and Charging Handle … (BURA3 20SS) $565.00
20” A2 Stainless Match Target Upper Rec./Bbl. Assembly - Solid Carry Handle … (BURA2B 20SS) $615.00
Same 20” A2 Stainless Assembly less Bolt, Carrier and Charging Handle … (BURA2 20SS) $465.00
Upper Receiver/Barrel Assemblies 25 [Link]
Bushmaster 11.5“ Bbl. Upper Receiver/Barrel Assemblies with 5.5” Flash Suppressor…
Similar to above Assembly with the addition of a CAR 15 Extended 5.5” Flash Suppressor (Part# MMT-500 - see Muzzle
Brakes & Flash Suppressors Section for details). Because this 5.5” Suppressor is pinned onto the barrel, and the pin is
then welded over, this assembly meets BATF 16" total barrel length requirements, and is available to the general public.
11.5/5.5” A3 Carbine Upper Receiver/Bbl. Assembly with 5.5“ Suppressor … (BURA3B 11.5/5.5) $675.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 11.5/5.5” A3 Upper Assembly less Bolt, Carrier & Charging Handle… (BURA3 11.5/5.5) $525.00
11.5/5.5” A2 Carbine Upper Receiver/Bbl. Assembly with 5.5“ Suppressor … (BURA2B 11.5/5.5) $575.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 11.5/5.5” A2 Upper Assembly less Bolt, Carrier & Charging Handle… (BURA2 11.5/5.5) $425.00
Upper Receiver/Barrel Assemblies for LAW ENFORCEMENT ONLY… Due to BATF
regulations restricting barrel length, the Upper Receiver/Barrel Assemblies below are legal for installation only on
weapons registered as Short Barrelled Rifles or Pistols, and cannot be sold to the general public without proper
paperwork and permitting. For any questions regarding these Uppers, please consult our LE Sales Professionals.
Bushmaster 11.5“ Bbl. Upper Receiver/Barrel Assemblies… .223/5.56mm cal. Chrome Lined 1 X 9
Twist Heavy Barrels with A2 Birdcage Suppressor, Forged Uppers in either A3 (Removable Carry Handle) or A2 (Solid,
fixed Carry Handle) configurations. A3 Uppers can be purchased without Carry Handle – deducted $100 from price.

A2 Solid Carry Handle Upper

A3 w. Removable Carry Handle

11.5” A3 Carbine Upper Receiver/Barrel Assembly … (BURA3B 11.5) $665.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 11.5” A3 Upper Receiver Assembly less Bolt, Carrier & Charging Handle… (BURA3 11.5) $515.00
11.5” A2 Carbine Upper Receiver/Barrel Assembly … (BURA2B 11.5) $565.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 11.5” A2 Upper Receiver Assembly less Bolt, Carrier & Charging Handle… (BURA2 11.5) $415.00
Bushmaster 14.5“ Heavy Bbl. Upper Receiver/Barrel Assemblies… These .223/5.56mm cal.
Assemblies feature a 14.5” Chrome Lined Barrel with Birdcage Flash Suppressor – legal only for installation on weapons
registered as Short Barrelled Rifles or Pistols.
14.5” Heavy A3 Carbine Upper Receiver/Barrel Assembly … (BURA3B 14.5) $665.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 14.5” A3 Upper Receiver Assembly less Bolt, Carrier & Charging Handle… (BURA3 14.5) $515.00
14.5” Heavy A2 Carbine Upper Receiver/Barrel Assembly … (BURA2B 14.5) $565.00
1 X 9 Twist, Chrome Lined Heavy Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 14.5” A2 Upper Receiver Assembly less Bolt, Carrier & Charging Handle… (BURA2 14.5) $415.00
Bushmaster 14.5“ M4 Bbl. Upper Receiver/Barrel Assemblies… .223/5.56mm cal. Chrome Lined
1 X 9 Twist M4 Profile Barrels (with cutout designed for Grenade Launcher attachment), A2 Birdcage Suppressor, Forged
Uppers in either A3 (Removable Carry Handle) or A2 (Solid, fixed Carry Handle) configurations.

M4A3 Type

14.5” M4A3 Carbine Upper Receiver/Barrel Assembly … (BURA3B 14.5M4) $675.00

1 X 9 Twist, Chrome Lined M4 Profile Bbl., A2 Front Sight, Flat-top Upper with A3 Removable Carry Handle
Same 14.5” M4A3 Upper Rec. Assy. less Bolt, Carrier & Charging Handle… (BURA3 14.5M4) $525.00
14.5” M4A2 Carbine Upper Receiver/Barrel Assembly … (BURA2B 14.5M4) $575.00
1 X 9 Twist, Chrome Lined M4 Profile Bbl., A2 Front Sight, Forged Upper with Solid A2 Carry Handle
Same 14.5” M4A2 Upper Rec. Assy. less Bolt, Carrier & Charging Handle… (BURA2 14.5M4) $425.00
A3 Assemblies can be ordered without A3 Carry Handle – deduct $100 from A3 price.
For further information… on all these complete Upper Assemblies, see [Link] or check the
complete rifle descriptions. The Bushmaster Sales Team is available 8:30 AM – 7:00 PM at 1-800-998-7928.

Upper Receiver/Barrel Assemblies 26 Orders – 1 800 998 7928

 BUSHMASTER BARRELS… are the finest AR15/M16 type barrels made - machined from
ChroMoly Vanadium steel and hardened to Rockwell C26 – 33. We also offer 20"/24" Heavy Profile Barrels machined
from Stainless Steel. Most Bushmaster barrels are hard chrome lined (except the Stainless Steel, Varminter; Predator,
DCM and 9mm) to offer corrosion resistance in the bore and chamber. The chrome lining is much harder than barrel
steel, and effectively doubles barrel life with proper care (exactly why the military specifies the process). Chrome’s
lubricity (i.e. “slipperiness”) reduces friction, increases velocity, aids in chambering, extraction, and speeds barrel
cleaning. Bushmaster barrels are manganese phosphate finished (except the Stainless) to guard against exterior rust or
corrosion, and to provide the same matte black, non reflective finish found on quality military type arms.
Rifling… Bushmaster barrels are button rifled with 6 grooves and lands, right hand twist, 1 turn in 9" (except for
DCM & Predator barrels - 1 in 8"). The 1 in 9" twist offers optimal results for the widest variety of commercially available
.223 / 5.56mm ammunition.
Forged Front Sights… Our standard front sights are machined from steel forgings to offer superior tensile
strength. We do not use castings, which may crack or break if you accidentally drop your rifle.
Headspacing… Barrel assemblies are headspaced at the factory and are shipped ready for assembly and use.
Barrel assemblies can be ordered with either a stepped, crowned muzzle or a threaded muzzle for attachment of a flash
suppressor or muzzle brake. BATF rulings permit permanent factory installation of muzzle brakes/suppressors on barrels if
the overall length (barrel & brake, etc.) equals at least 16". Ask your Bushmaster representative about factory installed
muzzle brake / compensator / flash suppressor options available, or see Muzzle Brakes/Suppressors in this catalog.
Purchase Two Ways… In the listings below, Bushmaster Barrels can be purchased as “Complete
Assemblies” which include all parts forward of the Upper Receiver: Handguards; Gas Tube; Delta Ring Kit; etc. as
shown here:

Bushmaster Barrels can also be purchased as “Barrel Only" which includes the barrel; barrel nut; handguard
cap and complete front sight assembly (with sight post and sling swivel) as a savings to those shooters who already have
handguards. An example in ”Barrel Only” configuration is shown here:

Note: “Barrel Only” assemblies of 16” or longer length will not include flash suppressors - order those
separately from our Muzzle Brakes / Suppressors / Compensators Section.
Barrel Fluting Option… Fluting is the process of milling 6 grooves into the barrel’s surface to increase
cooling capability by increasing the barrel’s surface area. Depending upon barrel length, fluting increases surface area by
as much as 180% - and can reduce barrel weight by as much as 20%. Because of the extensive machining involved,
order fulfillment on fluted barrels can take longer. Ask your sales representative about availability when ordering fluted
barrels. To order a barrel with fluting, simply ADD $50.00 to the price of the barrel (or assembly), and add an “F” to
the end of the part number. Note: Fluting is not available on some barrels, such as the A2 Gov’t. Profile, the M4 Type
Barrel and some Stainless Steel Barrels. Fluting is included on Varminter and Predator Barrels (predator shown below).

“Pre-Ban”/”Post-Ban”… A Caution for our Customers: When the “Assault Weapons Ban of 1994”
expired on Sept. 13th, 2004, it became legal to again offer features on the AR15 type rifle such as flash suppressors and
bayonet lugs that had been deemed illegal for those previous 10 years. Though that Federal Legislation has expired,
certain States have retained their own versions of “Assault Weapons Ban” Statutes. Buyers should check their own State
and County laws to determine the local legality of rifles or parts such as barrels with these features and accessories.
Example of a Bushmaster Barrel with “Pre-Ban” Example of a Bushmaster Barrel with “Post-Ban”
features below – Bayonet Lug and Birdcage Flash features below. These do not have Bayonet Lug or
Suppressor. These assemblies have part numbers Flash Suppressor. These assemblies have part
that begin with “A BBL”... numbers that begin with “P BBL”...

Barrels & Barrel Parts 27 [Link]

Bushmaster Barrel Assemblies… .223 Rem / 5.56mm Caliber
14.5" M4 Barrel Assembly with Izzy Compensator… This assembly – an M4 profile Chrome lIned
Barrel with pinned and welded Izzy Compensator – is BATF legal for semi-auto rifles. Total length is just over 16".
With Bayo. Lug & Izzy Comp. …(A BBL-14M4 IZFHA) $270.00
Without Bayonet Lug… (P BBL-14M4IZA) $270.00

14.5" M4 Barrel Only

with Izzy Compensator…
With Bayonet Lug (A BBL-14M4 IZFH)… $240.00
Without Bayonet Lug (P BBL-14M4IZ)… $240.00
14.5" M4 Barrel Assembly with AK Muzzle Brake… Features M4 profile 14.5” Chrome Lined Barrel
with AK type Muzzle Brake permanently pinned and welded for BATF legality (16” overall length) on semi-automatics.
With Bayonet Lug… (A BBL-14M4AKA) $260.00 / Without Bayonet Lug… (P BBL-14M4AKA) $260.00
14.5" M4 AK Barrel Only… With permanent AK Brake – less Handguards, Gas Tube and Delta Ring Kit.
With Bayonet Lug… (A BBL-14M4AK) $230.00 / Without Bayonet Lug… (P BBL-14M4AK) $230.00
14.5" Heavy Barrel Assembly with AK Muzzle Brake… A heavy profile 14.5” Chrome Lined Barrel
with AK type Muzzle Brake permanently pinned and welded. 16” overall length meets BATF regulations for semi-autos.
With Bayonet Lug… (A BBL-14.5AKA) $250.00 / Without Bayonet Lug… (P BBL-14AKA) $250.00
14.5" Heavy AK Barrel Only… With permanent AK Brake – less Handguards, Gas Tube and Delta Ring Kit.
With Bayonet Lug… (A BBL-14.5AK) $220.00 / Without Bayonet Lug… (P BBL-14AK) $220.00
16" M4 “Patrolman’s Carbine” Barrel Assembly… 16” M4 profile Chrome Lined Barrel with A2
Birdcage Suppressor on Threaded Muzzle – one of our most popular configurations.
With Bayonet Lug … (A BBL-16M4A) $235.00 / Without Bayo. Lug or Threaded Muzzle… (P BBL-16M4A) $235.00
16" M4 “Patrolman’s Carbine” Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayonet Lug… (A BBL-16M4) $205.00 / Without Bayonet Lug or Threaded Muzzle… (P BBL-16M4) $205.00
16" Heavy Carbine Barrel Assembly… Heavy profile 16” Chrome Lined Barrel with A2 Birdcage Suppressor
on Threaded Muzzle - many other Suppressors & Brake will screw on, ask your Bushmaster Salesperson for details.
With Bayonet Lug… (A BBL-16A) $225.00 / Without Bayonet Lug or Threaded Muzzle… (P BBL-16A) $225.00
16" Heavy Carbine Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayonet Lug… (A BBL-16) $195.00 / Without Bayonet Lug or Threaded Muzzle… (P BBL-16) $195.00
16" SuperLight Barrel Assembly… The lightest 16” Chrome Lined Barrel we offer – with A2 Birdcage
Suppressor on Threaded Muzzle. Tapers from .670” to .565” under handguards, .625" under sightbase, and to .570” at
the muzzle (similar to the original Vietnam era A1 barrel profile). Note: due to diameter at muzzle, no “slip-on/pinned”
type muzzle brakes will fit this barrel. Use only 1/2”x 28 T.p.I. threaded accessories.
With Bayonet Lug… (A BBL-16SLA) $235.00 / Without Bayonet Lug or Threaded Muzzle… (P BBL-16SLA) $235.00
16" SuperLight Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayonet Lug… (A BBL-16SL) $205.00 / Without Bayonet Lug or Threaded Muzzle… (P BBL-16SL) $205.00
16" Dissipator Heavy Barrel Assembly… A 16” Chrome Lined Barrel with carbine position gas block, and
full length, heat shielded Handguards for excellent cooling and the full sight radius designed into the A2 sight system.
With Bayonet Lug… (A BBL-16DA) $245.00 / Without Bayonet Lug or Threaded Muzzle… (P BBL-16DA) $245.00
16" Dissipator Heavy Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayo. Lug… (A BBL-16D) $215.00 / Without Bayo. Lug or Muzzle Threads… (P BBL-16D) $215.00
“Carbine” positioning of the functional gas block
on Dissipators is unique, and highly effective.
16" Dissipator M4 Barrel Assembly… As described above but with M4 profile for lighter weight. Carbine
position gas block, heat shielded Rifle Handguards, full sight radius designed of the A2 sight system.
With Bayo. Lug… (A BBL-16DM4A) $255.00 / Without Bayo. Lug or Threaded Muzzle… (P BBL-16DM4A) $255.00
16" Dissipator M4 Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor (shown above).
With Bayo. Lug… (A BBL-16DM4) $225.00 / Without Bayo. Lug or Threaded Muzzle… (P BBL-16DM4) $225.00
See Muzzle Brakes and Flash Suppressors Section for a variety of options available for these Barrels.

A2 Birdcage Izzy Compensator Y Comp Mini Y Comp AK Brake Phantom

$6.50 $36.95 $48.95 $31.95 $27.95 $36.95
Barrels & Barrel Parts 28 Orders – 1 800 998 7928
Bushmaster Barrel Assemblies… .223 Rem / 5.56mm Caliber
20" M16A2 Type Barrel Assembly… A Gov’t. profile Chrome Lined Barrel – light in weight and reduced in
diameter under the handguards – ideal for restoring that older rifle or building a new light-weight.
With Bayonet Lug & A2 Birdcage Suppressor…
(A BBL-20A2A) $235.00
With Plain Muzzle & no Bayonet Lug…
(P BBL-20A2A) $235.00

20" M16A2 Type Barrel Only…

With Bayonet Lug… (A BBL-20A2) $205.00 / Without Bayonet Lug or Muzzle Threading… (P BBL-20A2) $205.00
20" National Match Heavy Barrel Assembly… A 20” heavy profile Barrel Chrome Lined in both Bore and
Chamber – with A2 Birdcage Flash Suppressor and all parts forward of the Upper Receiver.
With Bayonet Lug… (A BBL-20A) $225.00 / With Plain Muzzle & no Bayonet Lug… (P BBL-20A) $225.00
20" National Match Heavy Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayonet Lug… (A BBL-20) $195.00 / Without Bayonet Lug or Muzzle Threads… (P BBL-20) $195.00

24" National Match Heavy Barrel Assembly… 24” heavy profile Chrome Lined Barrel similar to above.
With Bayonet Lug… (A BBL-24A) $235.00 / With Plain Muzzle & no Bayonet Lug… (P BBL-24A) $235.00
24" National Match Heavy Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayonet Lug… (A BBL-24) $205.00 / Without Bayonet Lug or Muzzle Threads… (P BBL-24) $205.00
20" Stainless Steel Heavy Barrel Assembly… Per request of many High Power Competition shooters, the
accurate 1 in 9" twist Bushmaster Barrel is available in brush finished, non-chrome lined, 416 Stainless Steel.
With Bayo. Lug and Birdcage… (A BBL-20SSA) $275.00 / Plain Muzzle & no Bayo. Lug… (P BBL-20SSA) $275.00
20" Stainless Steel Heavy Barrel Only… Less Handguards, Gas Tube, Delta Ring Kit and Suppressor.
With Bayonet Lug… (A BBL-20SS) $245.00 / Without Bayonet Lug or Muzzle Threads… (P BBL-20SS) $245.00

24" Varminter Barrel Assembly… 24” Fluted, Non-Chrome Lined Barrel based on DCM Competition design
– button rifled 1 x 9". Features a hybrid SAAMI Spec. chamber with longer throat or “Leade” to accommodate 5.56mm
ammunition. It is 1" in diam. out to the gas block with an 11° competition muzzle crown; V Match Sight Base/Gas Block
and Varminter Vented Forend with Bipod/Sling Stud. Assembly includes a bolt specificly fitted to the barrel. We
recommend assembly onto your Upper Receiver by
an experienced AR15 gunsmith to achieve full
accuracy – shipped unassembled.
(P BBL-24FVAR9A) $391.95

24" Varminter Barrel Only… Same as above: Barrel, Bolt and V Match Milled Gas Block – less Varminter
Vented Forend and Gas Tube. Shipped unassembled – gunsmithing recommended. (P BBL-24FVAR9) $313.95
20" Predator Barrel Assembly… Similar to Varminter above but 20” Fluted length and rifled 1 x 8"for the
heavier bullets used on Predators – non-chrome lined, with an 11° competition muzzle crown; V Match Sight Base/Gas
Block and Vented Forend with Sling Stud – assembly by gunsmith recommended… (P BBL-20FPRED8A) $381.95
20" Predator Barrel Only… Same as above: Barrel, Bolt and V Match Milled Gas Block – less Vented
Free-Float Forend and Gas Tube. Shipped unassembled – gunsmithing recommended… (P BBL-20FPRED8) $303.95
24" Stainless Varminter Barrel Assembly… A highly accurate 24" Barrel as used in our Stainless Varmint
Special Rifle - brush finished 416 Stainless Steel, in 1 in 9" twist – complete with Vented Aluminum Free-floater Forend,
Sling Stud, Gas Block, Gas Tube, Bolt
and Barrel Extension. Shipped
unassembled – requires gunsmithing.
(P BBL-24A-SS) $391.95

24" Stainless Varminter Barrel Only… Includes 24" 1 X 9” Twist Stainless Steel Barrel with Gas Block,
Gas Tube, Bolt and Barrel Extension. (P BBL-24SS) $313.95
Barrels & Barrel Parts 29 [Link]
Bushmaster Barrel Assemblies… .223 Rem / 5.56mm Caliber
DCM Competition Heavy Barrel with Factory Matched Bolt and Front Sight Base… A
non-chrome lined, lapped 20" Barrel, button rifled in 1 x 8” twist, with 11° competition muzzle crown – custom match
hybrid chambered with longer throat ("Leade") to accommodate 5.56mm ammunition (avoids the higher pressures
developed when shooting 5.56mm ammo in a .223 caliber chamber with a shorter Leade - both calibers can be safely
used). Chrome Moly Vanadium Steel with a Manganese Phosphate finish – 1" diam. from the barrel extension forward
to the sight base step. Note: Assembly by a Gunsmith recommended for optimum accuracy.

DCM Competition Bbl. No muzzle threading or bayo. lug… (9349054-20CGA) $313.95

Same barrel with std. muzzle threading for flash supressors… (9349054-20CGAPRB) $313.95
Bushmaster Barrel Assemblies for Law Enforcement ONLY… .223 / 5.56 Cal.
These Law Enforcement / Military Barrel Assemblies are under the 16" legal minimum for semi-automatic rifles, and per
BATF Regulations, can only be installed on weapons registered as full autos or legal short barrelled rifles.
14.5" M4 Type Barrel Assembly… A Chrome Lined, 1 x 9” twist Barrel with Birdcage suppressor –
machined for the addition of the M203 grenade launcher with the
narrow “government” profile under the handguards for light
weight like the original A1 rifle barrel.
(A BBL-14M4A) $235.00
14.5" M4 Barrel Only…
Same M4 barrel less Handguards,
Gas Tube, Delta Ring Kit and Birdcage Flash Suppressor.
(A BBL-14M4) $205.00
Bushmaster ”Short Barrelled” Assemblies… These chrome lined barrel assemblies (either 11.5” or
14.5”) with A2 Birdcage Suppressors may only be used on registered short barrelled rifles, or full auto models for legality.
11.5" Barrel Assembly… (A BBL-11.5A) $225.00 / 11.5" Barrel Only… (A BBL-11.5) $195.00
14.5" Heavy Barrel Assembly… (A BBL-14.5A) $225.00
14.5" Heavy Barrel Only… (A BBL-14.5) $195.00 11.5" Heavy Barrel
Assembly Shown
NOTE: with a permanently installed Izzy Compensator, or
other 23/16” suppressor, the 14.5" Heavy Barrel
Assembly becomes a legal 16" barrel. Ask your
Bushmaster Salesperson for details.
Stainless Steel Replacement Barrels for Carbon 15 Rifles & Pistols… Match Grade
416 Stainless Steel factory replacement barrels – .223/5.56mm Cal. – precision machined, polished and 1 X 9” button
rifled, these barrels require factory installation (special torqueing with a unique barrel wrench – no charge).
Carbon 15 R21 & Bushmaster Lady Rifle Barrel… (AZ15367) $159.95
Carbon 15 R97 Rifle Barrel… (AZ15368) $209.95 / R97S & R97F Barrel… (AZ15368T) $209.95
P21 Pistol Barrel… (AZ15313) $139.95 / P21S Pistol Barrel… (AZ15313T)$139.95
P97 Pistol Barrel… (AZ15314) $179.95 / P97S PistolBarrel… (AZ15314T) $179.95
Bushmaster Barrel Parts… See Pages 40/41 for complete Schematic Parts Diagram
Gas Tubes… Quality materials and machining, properly bent for a perfect fit and flawless functioning in your rifle.
Rifle Length Gas Tube… (8448567) $14.95 / Carbine Length Gas Tube… (1005-914-3504) $12.95

Gas Tube Roll Pin… (MS16562-106) .50¢

Handguard Caps… $6.50 ea. Manganese Phosphate finished steel Handguard Caps in three different types for
Standard or Heavy profile barrels. NOTE: Rifle Length Handguards take the Triangular Cap / Standard Carbine
Handguards take the Round Cap / M4 (Oval Profile) Carbine Handguards take either Round Cap (B. or C.).
…$6.50 each For Standard Barrel For Heavy Barrel A. B. C.
A. Triangular Cap… (Part # SGW-10) (Part # 9349053)
B. Round Cap… (Part # SGW-09) (Part # SGW-10F)
C. M4 Cap… notched for M203 (Part #SGW-10F-M)
NOTE: Bushmaster DOES NOT sell Front Sight
Bases separately due to the difficulties of NOTE: Diameter of Standard Barrel = .625”
drilling and retro-fitting them to barrels. Diameter of Heavy Barrel = .750”
Barrels & Barrel Parts 30 Orders – 1 800 998 7928
Bushmaster Barrels & Barrel Parts… Delta Ring Kit… Includes Aluminum Delta Ring,
Handguard Weld Spring, Snap Ring and Gas Tube Pin (all
Individual Delta Ring Parts…
parts as shown at left). (8448712K) $13.95
Individual Barrel Parts…
A. Front Sling Swivel… (8448571) $3.50
B. Front Sling Swivel Rivet… (8448571) $.80
A. B. C. D. C. Barrel Extension… (9349054BE) $15.95
All new, highest quality, Made in USA parts… D. Barrel Nut… (9349054BN) $12.95
A. Aluminum Delta Ring… (8448712) $7.50
B. Handguard Weld Spring… (8448555) $5.25 A.
C. Handguard Snap Ring… (MS16626-1137) $2.75
D. Gas Tube Roll Pin… (MS16562-106) $ .50 B.
C. D.
COMPENSATORS / FLASH SUPPRESSORS / MUZZLE BRAKES…
Bushmaster “Izzy” Flash Suppressor/Compensator… One of a series designed by a Bushmaster
employee - features 3 gas ports, a machine turned ribbed design, and a closed bottom. It is bored to function
as a Flash Suppressor, but also effectively controls muzzle rise in rapid fire. Machined from
quality gunsteel – manganese phosphate finished – 2 3/16” overall length – threaded 1/2” x
28 T.p.I. (threads per inch) for 5.56mm/.223 Rem. caliber barrels. Install using a 3/4” open end
IZ-102660-FH wrench and a crush washer or peel washer. (IZ-102660-FH) $36.95
IZ-102660-SFH
Bushmaster “Izzy” Flash Suppressor/Compensator… for plain muzzle
5.56mm/.223 cal. “Post-Ban” guns. Similar to above but slips over .700" diam. muzzles and is
pinned on with a taper pin and high strength Loctite® for extra safety. Warning: Requires factory
installation, or professional gunsmithing, to drill and install the taper pin. (IZ-102660-SFH) $36.95
Bushmaster Izzy Muzzle Brake… A 5.56mm/.223 Cal. Muzzle For Plain Crowned Muzzles
Brake – production approved by the BATF – featuring four gas ports and 2 5/8” Length
a ribbed design to improve cooling. Machined of 4140 gun steel with a
For manganese phosphate finish – very effective in controlling muzzle rise.
Threaded Slip-on/taper pinned version for barrels with plain crowned muzzles, and
Muzzles… threaded model (shown left - threaded 1/2” x 28 T.p.I.) can be installed without regard to
2 3/16” Length
port location (timing) and will still be effective, however most are installed with ports positioned 12 - 3 - 6
- 9 o'clock. The slip-on, pinned version requires factory installation or professional gunsmithing to drill and install the
taper pin, and for extra safety, high strength Loctite® should be used in addition to the taper pin.
• Threaded Izzy Brake… for 1/2” x 28 T.p.I. threaded barrels – requires lock washer… (IZ-102660-PRBF) $36.95
• Slip-on Izzy Brake… for plain muzzles .700” diameter – requires gunsmithing… (IZ-102660-PSTF) $36.95
• .308 Izzy Brake… for .308 Cal. threaded barrels (5/8” x 24) – requires crush washer… (IZ-308-PRBFH) $36.95
Phantom 2 Flash Suppressor... An improved version of the Phantom – no bottom
slot avoids a dust signature when firing prone. Superior flash hiding in all conditions. For standard
muzzles (1/2” x 28 T.p.I.), machined from quality gun steel with a final phosphate coating to mil.
specs. Overall Length is 2 3/16" – flats allow installation with a 3/4” wrench.
Note: Crush Washer or Peel Washer is required for correct timing – see below. (YHM-28-5C1) $36.95
Phantom Flash Suppressor… Precision CNC machined from quality gun steel – phosphate coated
to military standards – with 5 equally spaced gas slots, it eliminates most of the flash and offers
excellent performance with night vision equipment. Superior strength to earlier forked type, and it
won't hang up on brush or clothing. 2 3/16" Overall - for threaded muzzles only (1/2” x 28 T.p.I.).
Requires no specific timing, so no Crush, Peel or Lock Washer is needed. (YHM-29) $36.95
A2 Bird Cage Flash Suppressor… Five Slot Design (threaded 1/2” x 28 T.p.I.) without a 1 3/4” overall
length
bottom slot to avoid dust signature when shooting prone position. Peel Washer or Crush Washer is
required for correct installation timing. Note: Even if pinned on/welded over, this Suppressor is NOT
long enough to make a 14.5” barrel legal for use on a semi-auto rifle. (9349051) $6.50
A1 Bird Cage Flash Suppressor… Original “Birdcage” from the Viet Nam era – has six
equally spaced slots all around – needs no specific slot timing. Standard 1/2” x 28 T.p.I. threading.
For installation use the Flash Hider Lock Washer (below). (8448576) $6.50
1 3/4”
overall length Installation Washers… For timing of Muzzle Brakes, Flash Suppressors and Compensators…
A1 Flash Hider
A2 ”Crush” Washer… Used at Bushmaster A2 Peel Washer… A re-usable
Lock Washer…
multi-layer washer for the correct timing of
factory for positioning suppressor and muzzle brake
(8448577) .60¢
installations – for one time use only. suppressor or brake installations
It must be replaced after removal. on threaded muzzle barrels.
(12991533B) $2.95 (9349052) $3.15
Muzzle Brakes & Suppressors 31 [Link]
MUZZLE BRAKES / COMPENSATORS / FLASH SUPPRESSORS…
Russian Design AK74 Type Muzzle Brake… A 5.56/.223 caliber copy of the very effective Russian
Military brake found standard on the AK74 Rifle. Screws onto threaded muzzle barrels and locks in place with an Allen
head set screw (Note: a peel washer or crush washer is required for correct timing during installation). 3" overall length.
Muzzle climb is controlled by three upper gas ports - recoil is diminished by four 45° ports directing gas at an angle from
the weapon, and a contoured flat at the end of the brake directs gas sideways. The “Post-Ban” model slips over
non-threaded muzzles (.700” diam.) and pins in place (taper pin included).
For Threaded “Post-Ban” Model for
Muzzles… Non-Threaded Muzzles
(MMT-0012A) $27.95 (MMT-0012PB) $27.95 Requires taper pin drilling / pinning.
Fits standard threaded barrels - 1/2” x 28 T.p.I. Bushmaster factory installation is recommended.
5.5" AK74 Muzzle Brake for 5.56mm/.223
Carbines… (MMT-0013) $31.95 A very functional muzzle
brake for the short barrelled carbine - 5.5" overall length, when
permanently installed on the 11.5" barrel, makes a legal 16" barrel length. A Peel Washer is included for “timing”
(positioning of brake on muzzle). Threaded to fit standard muzzles (1/2” x 28 T.p.I.)
“CAR 15” Flash Suppressors... High quality, manufactured in the U.S.A. – the six slot design
makes these suppressors very effective on the short barrelled carbine.
For threaded muzzles only (threaded 1/2” x 28 T.p.I.).
A. CAR 15 Extended Flash Suppressor... 5.5" overall A.
length – threaded for all Pre-Ban barrels (MMT-500) $15.95
B. Shorty Look Slip-over Flash Suppressor... Internal
threads allow a “slip-over” installation onto the barrel - giving your gun a B.
“shorty” look without sacrificing accuracy – 5" overall length
For Std. Diameter Barrels (.610" at muzzle)… (MMT-0019) $15.95
For Heavy Diameter Barrels (.720" at muzzle)… (9349SFSH) $20.95
C. CAR 15 “Original” Flash Suppressor... This is the original 4.5" C.
M177 carbine design… (1005-914-3902) $15.95
Y COMP Muzzle Brake… (YHM-258) $48.95 or Mini Y COMP… (YHM-259) $31.95 for Threaded
Muzzle Barrels… These 5.56mm/.223 compensators are threaded to fit “Pre-Ban” AR barrels. The Y Comp overall
length is 3 1/4" - the Mini Y Comp is 2 5/16" overall length. These
brakes will fit barrels with muzzles threaded 1/2” x 28
T.p.I. (threads per inch). Order either a Crush Washer or
Peel Washer for installation.
Y COMP Muzzle Brake… (YHM-258P) $48.95 or Mini-Y COMP
Muzzle Brake… (YHM-259P) $31.95 for “POST-BAN” Rifles… These
effective compensators for 5.56mm/.223 AR type rifles are CNC machined from quality
gun steel – with manganese phosphate final finish. They slip over Post-Ban muzzles and
are held in place with a steel taper pin (drilling for taper pin is required for installation).
Angled ports on each side deflect gases, upper ports control muzzle rise. Mini Y Comp
adds 1 3/4" additional length to the Post-Ban barrel – Y Comp adds 2 5/8". Note: Bushmaster will only
warranty factory installations of these muzzle brakes - no installation charge if purchased from Bushmaster.
Threaded Muzzle Brake / Flash Suppressor Adaptor for Bushmaster
Carbon 15 Models... (AZ15133) $26.50 This Collar Adaptor allows installation of
standard flash suppressors and compensators on original design Carbon 15 barrels by threading
onto the collar, and installing on the muzzle in the usual manner. Machined from high quality steel
and aluminum; matte black finished; threaded 1/2” x 28 T.p.I. pitch for standard .223 / 5.56
suppressors/compensators. Note: Depending on the type of “timed” suppressor or compensator you want to install, you
may need to order a Crush Washer (Part# 12991533B - $2.95) or a Peel Washer (Part# 9349052 - $3.15).
Shoot-Away Muzzle Cap… Gov’t. Issue Type Blank Firing Adapters… (RAY-008) $15.95
(RCL-10) .45¢ ea. Red plastic Allows the AR15 type gas system to function with blank
muzzle cap designed to slip ammo. Made of heavy steel with a finish of bright red paint
over AR15/M16 Barrels to for safety – fits over A2 birdcage flash suppressor
keep out dirt and moisture. on 16” & 20” Bbls. For 11.5“ & 14.5” Bbls., order
Thin plastic can be shot yellow finished model… (RAY-0010) $15.95
through safely if necessary. Warning! Remove these adapters BEFORE Firing Live Ammo!
Muzzle Brakes & Suppressors 32 Orders – 1 800 998 7928
Magazines & Magazine Accessories… Bushmaster Magazines offer durability, value, and guaranteed
fit and function in .223/5.56mm AR15 type rifles. Boxes are stamped with a progressive die for tightest tolerances,
and the seam welding process has been optimized for weld ingot, strength and Mil-Std compliance. Box finish is
treated with Molybdenum Disulphide (Moly) for exceptional lubricity and lasting protection (superior to PTFE
“Teflon” used by others). The surface finish meets or exceeds MIL-PRF-46010 required for U.S.G.I. magazines. New
“anti-tilt” followers (marked for 5.56 caliber) ensure proper feeding, prevent failure to feed problems, and proved
superior in drop tests over traditional green followers. Quality tempered steel springs are used, and
baseplates (removable for cleaning) are stamped with the Bushmaster logo. These superior
magazines have received endorsment from the National Tactical Officers Association.
• 30 Round Magazine... $20.95 (8448670) As shipped
with most Bushmaster rifles.
• 20 Round Magazine... $24.95 (8448670-20) Shorter, Endorsed by
slightly curved body (not a straight body design). Features
of box, follower, and baseplate are as described above.
• 10 Round Magazine… $20.95 (8448670-10)
• 5 Round Magazine… $20.95 (8448670-5) Similar to
the 10 Round, but blocked for hunting use (laws in many
20 Round 30 Round
10 & 5 Round States limit magazine capacity to 5 rounds for hunting).
NEW… Bushmaster Stainless Steel .223 Magazines… For heaviest LE
and Military duty, these 20 & 30 Rd. Mags (similar in appearance and color to above) include anti-tilt followers, and
Bushmaster logo on the baseplate. Box strength is far superior to aluminum – can be disassembled for cleaning.
20 Rd. Stainless Steel Mag… (8448670-20-SS) $24.95 / 30 Rd. Stainless Steel Mag… (8448670-SS) $24.95
Bushmaster 6.8mm SPC Magazine… Enhanced Magazine Rebuild Kit for
Specific to the 6.8mm SPC Rifle – similar 5.56mm/.223 30 Rd. Magazines
the 30 Rd. .223 magazine above, but due to (MAG205-Gray) $11.95 An enhanced,
larger 6.8 case size hold only 26 rounds. 10 drop-in, Anti-Tilt Follower, and a Chrome Silicon
& 5 Rd. models have the same 30 Rd. shell Spring – all parts latest USGI design.
but are blocked to the indicated capacities.
They include anti-tilt followers, and the Standard Magazine Rebuild Kits... New Mil. Spec.
Bushmaster logo on the baseplate. All can parts to refresh your tired magazines – New Spring,
be disassembled for cleaning. New Green Follower and Bushmaster Baseplate – use
26 Rd. 6.8mm Mag (8448670-68) $35.95 your existing magazine bodies.
10 Rd. 6.8mm Mag (8448670-68-10) $35.95 30 Rd. Mag. Rebuild Kit… (8448670-30K) $6.50
5 Rd. 6.8mm Mag (8448670-68-5) $35.95 20 Rd. Mag. Rebuild Kit… (8448670-20K) $6.50
Bushmaster 10 Rd. Straight-Body Magazine… Green Magazine Followers… Original
20 Rd. design, new plastic replacements for
$20.95 (30-452) .223 Rem. / 5.56mm 10 Round 30 Rd.
capacity steel mag with black finish 5.56mm /.223 Rem. magazines.
and black follower. Originally designed For 30 Rd Mag… (8448672) $1.95
for the M17S Bullpup, but works well For 20 Rd Mag… (8448672-20) $1.95
in all AR type rifles - accepted for High Bushmaster Magazine Springs… Quality tempered
Power Match use by the Civilian steel springs for long memory and positive feed.
Marksmanship Program and N.R.A. As 20 Round Magazine Spring… (8448671-20) $3.95
shipped with our DCM Competition 30 Round Magazine Spring… (8448671) $3.95
Rifles – made in the U.S.A. 30 Round Magazines for Bushmaster 9mm Pistol &
40 Round Magazine for the Carbine… Either molded black polymer composite (ribbed
AR15/M16… (MG-0007) $24.95 for a non-slip grip) or metal (recommended for L.E. / heavy
These are new .223/5.56mm Cal. 40 usage), both can be disassembled for cleaning. May hold
Round Magazines with a matte gray 32 Rds., but for reliable feed, 30 Rds.
finished box and mil. spec. green should be the maximum. Metal mag has
follower. Due to local laws, we cannot indicator holes and quantity markings.
ship these magazines to several States Black Polymer… (AZ9-00001) $28.95
– check your local regulations. Black Steel… (AZ9-00003) $59.95
NOTE: With the 2004 “Sunset” of the Federal Gun Legislation of 1994, many features of AR15
Type Rifle are again available - BUT not in all States! Some States have their own Statutes regarding
the legality of “Assault Weapons” and the High Capacity Magazines used in them. To avoid legal
problems, check your local Statutes (both State and County) before ordering High Capacity Magazines
(greater than 10 round capacity). If in doubt, consult the Bushmaster Sales Dept. (1 800 998 7928).
Magazines & Accessories 33 Orders – 1 800 998 7928
Magazines & Magazine Accessories… 5 Rd. Magazine for Bushmaster .450...
(8448670-45-5) $35.95 The Bushmaster .450 utilizes a heavy duty stainless steel 20 Round AR
Type Magazine Box with a blue single stack follower installed above the anti-tilt type follower to
facilitate feeding this large diameter cartridge. This follower is the same as used in high power
Bushmaster .450 competition to load extra long bullets single shot. A special magazine
Single Stack
Follower
spring is utilized, and cartridges are “single stacked” to yield a full capacity
of 5 rounds. As the .450 cartridge is too wide to fit “through” the feedlips
in the conventional .223/5.56 manner, this magazine must be loaded by
sliding the cartridge under the feedlips.
The MagPul… (MP-3) $10.95 / Set of 3 A magazine
accessory for the AR15/M16 developed from infantryman’s
ingenuity and the need to make fast magazine changes. GI’s applied
loops of duct tape or paracord to the bottom of their mags to speed
magazine interchange and to deaden the sound of the magazines in a
storage pouch. This modern, molded black rubber MagPul improves Magazine
upon the original concept with rough exterior texturing for positive grip, not included
a semi-rigid finger loop for fast removal, and a snug fit on all AR type magazines.
The EasyLoader… $42.50 (8448670-EL223) Magazines for New Bushmaster BA50 Rifle
The EasyLoader - for Stripper Clips… $42.50 & Carbine – .50 BMG Cal.
(8448670-EL223SC) The EasyLoader works with a (BMG-1797A) $99.95
pull of the handle to loads all sizes of AR Magazines A heavy steel box
(other .223 cal. magazines as well). magazine for the big
The larger model .50 BMG (Browning
(8448670-EL223) is designed Machine Gun) Round
for loose ammo - just drop with laser engraved
the rounds in, close the Bushmaster logo,
cover and pull the slide. manganese
The smaller model phosphate finish,
(8448670-EL223SC) black follower
handles ammo and removable
already loaded floorplate.
in Stripper FN .308 Magazines… New 7.62mm (.308) FN FAL
Clips. Made magazines – all steel construction.
in U.S.A. .308 - 20 Round Magazine
(MAT-004) $21.95
Model for .308 - 10 Round Magazine
use with Model for (8448670-10-308) $33.95
loose use with .308 - 5 Round Magazine
ammunition. Stripper Clips.
(8448670-5-308) $33.95
Steel FN Magazine Loader…
MagPul Ranger Floor Plate with Loop for 5.56mm Magazines… (MAT-001) $8.95
(MAG020-BLK) $21.95 Set of 3
This U.S. made floorplate assembly for 30 Rd. AR15/M16 Magazines
incorporates an integral loop, floorplate lock, and mag identifier. When
installed on the base of a magazine, the MagPul Ranger provides
unsurpassed speed and controllability during high stress, tactical magazine
changes. The loop is molded of pliable Santoprene over a stainless steel plate
- a patented design based upon the tried and true para-cord loops and duct
tape tabs used in special warfare units
(Magazine
worldwide. Shown assembled and in pieces,
instructions included. Can be modified to fit 20 Rd. magazines. Magazine
not included) not
included.
MagPul Rubber Floor Plates for 5.56mm Magazines (MAG024-BLK) $21.95
Set of 3… The MagPul L Plate is a replacement floorplate assembly for 30 Round
AR15/M16 Magazines that incorporates a rubberized bumper pad of durable
Santoprene overmolded onto a stainless steel plate. A durable hard plastic
baseplate replaces the original magazine baseplate, then the bumper pad locks
onto that and the tabs of the magazine body. Sold in sets of 3. Can be modified to
fit 20 Rd. magazines. Instructions included. Made in U.S.A.
Magazines & Accessories 34 [Link]
Magazines & Magazine Accessories… Buttstock Mag Pouches for the AR15… Strap an
Command Arms Mag-Loader… (FBS-ML556) extra magazine on with these heavy duty pouches.
$12.50 A new AR15/M16 Models available for ambidextrous installation on either
Magazine Loader for the A2 Trapdoor Buttstock or the CAR Telescoping
5.56mm/.233 caliber Stock. Black nylon webbing construction with
ammunition, it works heavy-duty velcro flap closures for magazine retention
with M16/AR15, Ruger offer durability, and web and buckle strap attachment
Mini-14, and similar systems make for easy installation and removal.
magazines, and is A2 Solid Buttstock Magazine Pouch… $31.95 (TTMP)
designed to easily
load individual
magazines quickly
and efficiently. Molded
of black reinforced
polymer, this lightweight
and compact loader utilizes
a thumb activated lever
and carries a Command
Arms Lifetime Warranty. (Magazines not included.)

Magazine Pouch for Telestocks… $31.95 (TTTS)

The “L.U.L.A.” Mag Loader… $25.50
(8448670-LULA) L.U.L.A. is a
“Loader/Un-Loader Accessory” that
will load a 30 Rd. Mag in about 35
seconds, and unload it in 5!
They’re very popular in the
Bushmaster shooting room
and are used by the Israeli
Military as well. Fits all
capacity 5.56mm/.223
AR15/M16 type magazines First Samco Magazine Coupler…
including Thermolds and Orlites. (FBS-MCUP1) $12.95
This plastic magazine coupler
“L.U.L.A.” Mag Loader for 9mm… (24218) $31.95
firmly joins two 30
Similar in design and operation to model
round magazines.
pictured above, but for 9mm stick magazines.
Molded of black
AR15/M16 Magazine Gripper for 20 & 30 plastic with steel
Round Magazines… clamping screws.
(MG-01) $23.50 (Magazines not included)
A heavy duty, black
anodized aluminum AR15/M16 Magazine Connector… (51-08-01)
dual clamp and screw $25.50 Hold twice the ammo with this side by
kit offers the operator side magazine clamp - fits both 20 and 30 round
fast tactical reloads. Will mags. When you empty one magazine, drop them
join either 20 or 30 out, move over to the full one, and quickly reinsert.
round magazines. Made of heavy steel with flat black finish. Screw
Includes Allen wrench slot is sized for use with a coin – works with AR
and instructions. 180 magazines as well. (Magazines not included.)
(Magazines not included.)
Redi-Mag Model A1…
Triple Mag Connector… (RM-15A1) $79.95 with
(BC-100) $26.95 Bolt Release Button…
Connect 3 – 30 round Carry a spare magazine
magazines together in and make quick swaps
this black anodized from an empty one to a full one.
aluminum mount – for Just drop them out, move the fresh
a 90 round total one over, and push the bolt release
capacity. Clamps button to resume firing. Redi-Mag is
solidly together with constructed of sturdy steel with a
Allen head screws. black finish to match your rifle.
(Magazines not included) (Magazines not included.)
Magazines & Accessories 35 Orders – 1 800 998 7928
Magazines & Magazine Accessories… Stripper Clip Guides… (at left)
“ShotLock” Cable Lock for AR15 / M16… Stamped steel w. phosphate finish
(SLC3000) $8.50 This keyed, 13" cable (EGSS-02) $1.00 ea.
Stripper Clip… (below)
lock system will ensure safe storage of your (EGSS-01) .35¢ ea.
rifle. It locks through the open ejection port Stripper Clips… .30¢ each
and magazine well, and its vinyl covered in quantities of 25 or more.
cable prevents damage to finishes - useful on
a variety of other rifles and pistols as well.
A. B. C.

Competition Shell Deflectors… $22.95 ea. These shell case deflectors snap onto AR15 models to keep hot
brass under control and away from other competitors on the firing line. Left handers who’ve experienced “hot brass
in the face” will appreciate them. For the convenience of reloaders, they will drop all the cases in the same place at
your feet, and are allowed under NRA High Power Competition Rules. Order by style & part numbers below.
A. For A2 Fixed Carry Handle… (BD-A2) $22.95 / B. For A3 Flat-tops… (BD-A3-flattop) $22.95
C. For A3 Removable Handle… (BD-A3 Handle) $22.95
Bag Style Brass Catcher… (2693828) $42.50 A flexible black Cordura Fits V Match / Varminter / Predator
nylon bag with an internal frame and a zippered opening on the underside
for easy emptying of shell cases. A 2" wide velcro strap wraps around the
handguard to
hold the bag
and frame in
place so that
it fits flat-top
and other
AR15 type
rifles.
Three Magazine Pouch…
A2 Type - Sewn of Cordura nylon, with
others similar a silent clasp, suspension
Rigid Brass Catchers for AR-15 ring, and two belt clips
type Rifles… $37.95 ea. These hard (magazines not included).
plastic brass catchers hold a minimum of $16.95 ea.
60 casings. Molded of black, nylon reinforced plastic, Black… (6451)
they snap on and off your rifle easily. Olive Drab… (6452)
Order by Style & Part Numbers below…
For AR15/M16 A2 Fixed Handle Rifles…
(Part # EL-AR-001)
For AR15/M16 “Flat-top” Rifles without A3
Type Carry Handle… (Part # EL-AR-002) Mag-Brush... Keeps your magazine well and mags
For AR15/M16 A3 Removable Carry Handle… clean – which will help keep your firing chamber clean.
(Part # EL-AR-003) For AR15, Mini 14… (MAG206) $6.50
AR15/M16 Magazine Dust Covers… (ATI15223) Universal Magazine Tool… (UMT) $6.50 A pocket
$7.50 These flexible, molded black rubber caps sized tool that will load or unload any magazine on the
snap over the magazine top to keep out market today. Molded of heavy black plastic – includes
dust and water. Sold in Sets of a convenient brass key chain. Shipped with simple
Four - designed to fit instructions for use.
standard AR15/M16 metal
magazines (magazine not
included).
Magazines & Accessories 36 [Link]
SLINGS & BIPODS…
Spec-Ops Mamba Smarter - Stronger - Better!
Combat
Sling for
Telestocked M4 & other Carbines
(100240101) $39.95… The first sling
designed for full contact engagement -
for either left or right handed shooters, this
quality USA made product offers fast and easy 100% Made
transitions with a “tensioned triangle” design to in the USA
eliminate interference with body-mounted load bearing
equipment. It’s tubular web construction is super strong, and twist and tangle-free. Compatible with SOPMOD
components, the Mamba’s static-side “traverse” strap prevents the sling from tangling in weapons mounted
sighting or lighting systems. The Mamba does not use any metal snap clips, velcro or other noise-making hardware.
Guaranteed for Life!

Mamba Combat
Sling for Fixed Stock
Rifles (100240201) $39.95…
Designed with a custom
positioning “Speed-Lok”
The “Mamba”
feature, the Spec-Ops
Power Strike Zone
Mamba Slings allow the
wearer to balance and position the weapon according to situational requirements. A unique stretch section built
into the sling allows the user to strike an opponent with the weapon’s muzzle (”barrel thump”) while still keeping
the weapon slung and in ready position. Adjusting buckles allow “pre-setting” the sling for operator’s body size.
Also available: The Spec-Ops Universal Mamba Sling (100240501) $49.95… for ambidextrous mounting to
either carbines or full stocked rifles - with all the Spec-Ops Mamba features described above.
And, The Master Blaster Combat Sling (100300101) $29.95… Designed for combat shotguns and tactical rifles,
this sling features two adjustments for quick transitions & body sizing, and quality tubular web construction.
Turner Saddlery Leather Competition Sling… (TS-NMPTRS) $49.95
This National Match Police Tactical Rifle Sling is premium quality, black,
11 oz. strap leather – 54" in length with numbered holes. Fitted
with Mil Spec Parkerized steel hardware and copper rivets, and
the short strap is stitched with bonded nylon thread to resist
rot. Keepers are 7/8" wide and hand stitched. More and
more U.S. Military and civilian shooters are competing
with the M16 and AR-15 "Black Rifles" in the high
power matches, and this is the sling they choose!
Tactical “Silent Sling” for Carbon 15 Rifles and
others… (AZ723) $41.95 As supplied on the Carbon 15 97S
Rifle, this quality tactical sling will fit any other Bushmaster
Carbon 15 Rifle and can be adaptable to various other
firearms as well. This sling offers multiple carry modes, and
is sewn of durable, black ballistic nylon with easy Velcro
strap attachment mechanisms.
1 1/4" Wide Padded Rifle
Sling… (AS-60) $13.95 Gov’t. Issue Sling… $5.50 (12624561) A
For AR15/M16, or a variety 1 1/4" wide black nylon web
of other rifles. Black sling – 54" long,
webbing with a with two black
comfortable metal
shoulder pad, buckles.
and two black
metal buckles.

Slings & Bipods 37 Orders – 1 800 998 7928

SLINGS & BIPODS… Button Sling Carbine Endplate… This
Button Sling Double Bungee “Throw & Go” phosphated finished steel endplate replaces the
Single Point Tactical Carbine Sling… (TGPT) telestock locking collar on your carbine to provide a
$39.95 High quality black nylon tubing with internal solid mounting point for the one point sling at left. The
bungee cords make this sling uniquely adaptable to sling’s heavy duty tab slips onto the button for a secure
Tactical situations. The sling attaches to the rifle with mount – the U.S. Coast Guard trusts these slings to
the “Button” endplate shown at right, and offers keep from losing their M4’s “over the side”!
length adjustment, comfort and instant readiness.
For the right handed shooter, order:
(M4-M16) $19.95
M4-M16
For the lefty, order: Endplate
(M4L-M16) $19.95 shown

Button Sling Endplate in position

on carbine for right handed carry

Quake Industries “Claw” Non-Slip Sling… (51000-0) $38.95

This high quality sling is sewn with 1" wide black
webbing and includes a flexible, molded rubber
shoulder pad that offers silence, comfort
and won't slip or roll off your
shoulder. This is a “universal” design
sling – adaptable to many different rifles.

First Samco Equipment Mount for Rails…

(FBS-BP1) $31.99 Mounts to any Picatinny or Weaver
Bushmaster Modular Accessory System Bipod type rail with a push
Adapter… (YHM-638) $31.95 This attachment will button lock mechanism.
adapt Harris (or other) bipods to the B.M.A.S. Triple Molded of high density
Mount or other accessory rail segments. Machined from black polymer with a
Aircraft Aluminum – then black anodized to a mil. spec. standard stud for sling or
finish – with steel bipod mounting.
bipod stud. Bushmaster Modular Accessory System Swivel
Mounts to any Sling Stud... (YHM-9469) $4.75 Fits our Four-Rail
Picatinny or Forearms and other B.M.A.S. accessories
Weaver type rail. to provide a sling attachment point that
won't deflect the barrel when the sling
Bushmaster Modular Accessory System Rail is pulled tight. Rotates 360° – machined
Sling Mount… (YHM-9485S) $24.50 Attach a sling steel with black phosphate finish –
to any accessory rail (Picatinny or Weaver type) with threaded 5/16 x 32. Use with any
this B.M.A.S. Rail Sling Mount. It clamps standard Q.D. sling loop.
onto a rail system or forend rail
segment, and locks down with one Bushmaster Sling/Bipod Stud… (B-0807) $5.95
button head Allen screw – This universal bipod mounting stud will
includes the swiveling sling mount any standard, Quick Detach type
stud below mounted on an sling swivel. 3/8" shaft is threaded 10/32
anodized aluminum base. - use a #21 drill bit before tapping. We
use these on our Varminter models.
Quick Detach Sling Swivels… (KNS-4) $12.95
per pair. These 1 1/4" Loop Quick Detach Sling A2 Buttstock Sling Stud… $14.95
Swivels are heavy steel with a (KNS-5) This phosphate finished steel stud
phosphate finish and a screw replaces the old rear sling loop on standard
locking knob to ensure that A2 solid buttstocks. Unscrew the lower screw
the sling won’t work loose from the in the buttplate, then slip this in the loop
rifle. Fits any firearms with standard cavity and replace the screw. Accepts any
sling swivel studs installed. standard Quick Detach type sling swivel.
Slings & Bipods 38 [Link]
SLINGS & BIPODS…
Harris Ultralight Bipods… Versatile, sturdy, light, and fast - Harris Bipods
are real quality. Folding legs have completely adjustable spring-return
extensions. The sling swivel attaches to the clamp. Quality manufactured with
heat treated steel and hard alloys - all black anodized finish. These bipods swivel 45°
for instant leveling on uneven ground, and the hinged base has a tension
adjustment and buffer springs to eliminate looseness. Leg Length: Extended - 13"
/ Retracted - 9". Harris Model L will mount directly onto Varminters & Predator.
V Match rifles require installation of Sling Bipod Stud. Ribbed AR Handguards
require the HE-001 adaptor below. For mounting to accessory rails, use the
Samco FBS-BP1 or our Bushmaster Modular Accessories System Aluminum
Bipod Adapter (YHM-638).
Harris Model L – for XM15/AR15/M16 & others (as shown)…
(HE-002) $118.95
Harris Bipod Adapter for AR15 Handguards… (HE-001) $14.95

Steel Side-Sling Adapter… (12598617K) $34.95 This adapter - the

same as used in the original M203 grenade launcher kit - allows mounting a
sling to the side of the barrel for easier ready position carry. Machined from
gun steel, it is adaptable to both standard (.625" diam.) and heavy barrels
(.750" diam.) by flipping the double concave lock plate when installing.

Sling Mount Loops… For vertical carry mounting of

various slings, the front loop mounts onto the sight assembly.
For buttstock application, attach the loop onto the stock’s
rear sling loop. Phosphate finished, heavy spring steel
wire.
Front & Rear Set - 2 Loops… (2698877K) $8.50
or, Sold Individually… (2698877) $5.50 each

Bushmaster Modular Accessories System Front Sling Bushmaster Modular Accessories System
Mount & Accessory Rail… (YHM-9574) $78.50 Designed Front Sight Sling Mount… (YHM-9468) $31.95
to clamp into the standard AR Front Sight, this mount This Bushmaster Modular Accessories System Sling
combines a sling stud and Picatinny rail section for Mount installs easily (with three
attachment of flashlight or laser accessories. Two discs fit into Allen Screws) to position the
the sight, lock together with Allen head screws, then the rail sling along the side of
screws into those the front sight for a
and is oriented by comfortable carry –
means of the large shown separately and
knurled nut. installed. It includes a
Anodized swiveling stud which
aluminum with accepts standard
steel screws quick detach sling
and stud. mounts.
Shown installed and separately.
Shown installed
Bushmaster Modular Accessories System and separately.
Tactical Sling Adapter… (1005-914-2942-T) $14.95
A Tactical Sling Adapter made for attaching various
types of slings - allows mounting either web type slings
or those that have “lobster claw” type clips. This
phosphate finished steel adapter plate replaces your
telestock receiver end plate, and allows ambi sling
mounting on the primary, or offside shoulder position
for a comfortable “tactical” carry. Removal of the stock
and receiver extension is necessary for installation of
this adapter (don’t lose the Takedown Detent & Spring
when removing the existing endplate).

Slings & Bipods 39 Orders – 1 800 998 7928

Parts Reference Diagram
BARREL, HANDGUARD and FRONT SIGHT
COMPONENTS IN THIS DISASSEMBLY GROUP

Thermoset Handguard
Carbine Gas Tube 1005-914-3504
(2) 1005-914-4572

Handguard Cap SGW-10F-M

• Caliber: Chambered
14.5” Barreled M4A3 Type Carbine - as shown here… (Order Part #QP-010B) Also available for 20” Barreled A2 Semi-Automatic Rifle… (Order Part #QP-010)

Hand Guard for NATO 5.56mm

Snap Ring
MS16626-1137
Also accepts
.223 Remington
Weld Spring 8448555
Front Sight Post 9349056 • Mode of Fire:
Delta Ring 8448712 M4 B
arre Front Sight Detent 8448573
Semi-Automatic
l-D
Barrel Indexing Pin 9349054BIP iame
ter R Front Sight Detent Spring 8448574 • 30 Round Magazine
BUSHMASTER SCHEMATIC PARTS POSTERS – COLOR PRINTED ON 80# GLOSSY STOCK – $4.95 PLUS SHIPPING

e duce
Barrel Extension 9349054BE d He
To A re Gas Tube Roll Pin Ms16562-106
Barrel Nut 9349054BN ccom
mod
ate M20
Front Sight Base With Bayonet Lug 9349054FSHA • 34.75" Length Overall
Thermoset Handguard 3 Gren
Charging ade Barrel Subassembly
(2) 1005-914-4572 Laun - A BBL-14M4 Crush Washer 12991533B
Handle
Latch
cher • 14.5" Barrel Length
Roll Pin Izzy Flash Suppressor
MS16562-96 CHARGING IZ-102660-FH • Button Rifling - 1 X 9"
Will be permanently
HANDLE ASSEMBLY pinned/welded over Right Hand Twist
8448517 on commercial barrels.
Front Sight • Weight w/o Mag. 6 Lbs.
Charging Handle
40

Taper Pins (2)

Latch 8448519 9349054BTP NOTE:
Charging Handle
Latch Spring 8448520
Front Sling Swivel 8448571 THIS RIFLE IS ALSO
Charging Handle
Front Sling Swivel Rivet
8448697
AVAILABLE WITH THE FIXED
8448518
UPPER RECEIVER, BOLT A2 HANDLE TYPE UPPER
Firing Pin 8448503-S AND BOLT CARRIER RECEIVER
Bolt Carrier Key Screw (2) 8448508
ASSEMBLIES / COMPONENTS REAR SIGHT
Bolt Carrier Key 8448506 ASSEMBLY/COMPONENTS
Rear Sight Rear Sight Windage Screw
REAR SIGHT
Orders – 1 800 998 7928

Windage 9349076
Firing Pin Retaining Pin 8448504 ASSEMBLY Knob Pin
9349072-1 MS16562-98 Rear Sight Base 9349074-1
Cam Pin 8448502 Index Screw Rear Sight Helical
9349065 Rear Sight Spring 9349069
Bolt Carrier 8448507-S Windage Rear Sight Ball Bearing
CARRY Index, Elevation
Knob MS19060-4808
BOLT CARRIER 9349066-1
9349077
HANDLE Ball Rear Sight Aperture
ASSEMBLY Knob, Elevation 9349075
ASSEMBLY 9349067-1 Bearing
Rear Sight Flat
8448501 MS19060-4808
9349063-9 Elevation Spring
Spring 8448536
Extractor Pin 8448513 Index Spring Rear Sight Ball Bearing
9349070 9349063-8
UPPER
Ejector Roll Pin Ms19060-4808
Rear Sight Elevation Rear Sight Helical RECEIVER &
Bolt Gas Rings (3) 8448511k MS16562-98
Bolt 8448510 Ejector
Spring Pin Spring 9349069 BARREL
Extractor Spring 8448755SP Spring FORWARD ASSIST Ms16562-121 ASSEMBLY
Extractor Spring Insert 8448754 8448516 ASSEMBLY 9349086KIT BURA3B 14M4 IZ
Extractor 8448512 Forward Assist Pawl Detent 8448544
Thumb Nut Assembly
Plunger Pawl Spring 8448542
BOLT ASSEMBLY Ejector 9349063-7 (2 Places)
9349085
8448515 Forward Assist
8448509 Spring Pin
Clamping Bar
9349063-3
MS16562-121
Cross Bolt
Pawl 9349063-4 (2 Places)
Spring Pin
Carry Handle - Forged
MS16562-103 Forward Assist
9349063-2
Pawl 8448543
Forward Assist
Spring 8448540 Ejection Port
Cover Pin 8448533
Ejection Port Cover Spring
8448532
Ejection Port Cover
8448525
Upper
Parts Reference Diagram

Receiver
8448524-V
Ring,
Retaining Cover
M4A3 CARBINE MS16632-1012
5.56MM / .223 REM.
Part # BCWA3F 14M4 IZ

LOWER RECEIVER, PISTOL GRIP,

BUTTSTOCK and MAGAZINE
COMPONENTS IN THIS
DISASSEMBLY GROUP ®

Car. Buffer Spring Buffer Retainer

1005-914-4564 8448582 NOTE:
Hammer with J pin
Buffer Retainer Pre-Ban 30 Round
8448612-SK
6 Position Spring 8448583 Magazine shown
Hammer Spring here for disassembly purposes.
Carbine Receiver
8448611 Post-Ban 10 Round Magazines can not
Extension - 1005-914-2929-6
Safety Selector Lever be disassembled without causing damage.
41

Buffer Assembly 9381367-S Rebuild Kits for 20 & 30 Rd. Magazines are
1005-914-4578 available.
Bolt Catch
8448628 They include all parts shown here except box.
Lower Bolt Catch Roll Pin
Internet – [Link]

Pin, Buttstock Receiver MS16562-119 Magazine

Slide Lock 9349102-S Follower 8448672
Bolt Catch Plunger
1005-914-3229 Takedown Pin Spring
8448634 Magazine
8448586
Receiver Box Assy.
Takedown Pin Detent Bolt Catch
Extension Spring
Lockpin Spring 8448585 FIR
E
Nut 8448633
1005-916-9178 Takedown Pin
5310-917-1154 SAF
E
Collar, 8448584 Magazine
Buttstock Catch
Tube Lock 8448638
1005-914-2942

Pivot Pin Detent

8448585
Safety Detent Pivot Pin Spring
Telescoping 8448631 8448586
Buttstock Safety Detent Spring Pivot Pin
Trigger 8448621
Assembly 8448516
Guard
1005-087-8988-PK Pivot Roll Pin Disconnector Spring
Pistol Grip 8448594
Telestock Latch 9349127 MS16562-35
1005-087-8987P Disconnector
Lock Washer
Roll Pin Magazine 9349114-S
MS35335-61
Lockpin Nut MS16562-106 Catch Spring
5310-917-1215 Pistol Grip Screw Trigger 8448592-S
8448637
AN501D416-18
Trigger Guard Trigger Spring
Magazine Assembly Magazine Floor
Hammer and 8448593
Made with Pride Catch Button 8448587 Plate 8448673
Trigger Pins
in the U.S.A. 8448636
8448609 Magazine Spring 8448671
ORDERING INSTRUCTIONS / SHIPPING INFORMATION…
FOR FASTEST ORDER PROCESSING, visit our Website and order direct from our online catalog at…
[Link] Our entire catalog and more is on the Internet - offering
easy and secure ordering without waiting time on the phone! Many of our orders received via Internet are processed
and shipped the same day (with the exception of back ordered items). Any orders that include E-mail addresses
automatically get a return mail confirmation of shipment including the type of shipping service, a FedEx tracking
number (if applicable), C.O.D. costs (if applicable), and notification of multiple packages. Customer Service and
Technical Support inquiries can also be handled quickly and efficiently by E-mail. Contact us at:
Customerservice@[Link] Techsupport@[Link] Export@[Link]
For Telephone Orders, Call: 1-800-998-7928
Bushmaster Sales Consultants are on call: Mon. through Fri.: 8:30 am – 7:00 pm
(Eastern Standard or Daylight Savings Time - all other hours of the day by answering machine)
For Orders by FAX: 1-207-892-8068 Customer Service: 1-800-883-6229
(Customer Service Phone Hours: Monday through Friday - 8:30 am - 6:00 pm)

All Catalog Prices are in U.S. Dollars – Please Pay in U.S. Currency
CATALOG PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!
Current pricing can be seen on our website – [Link]
Please Have Your Credit Card Available. We will NOT charge
your credit card until we ship your order! FREE Gunsmithing
and assembly is available on most AR15/M16 parts at the
time of purchase. We accept purchase orders from Federal,
State, and Local Governments and Institutions.
Bushmaster Firearms International, LLC • 999 Roosevelt Trail • P.O. Box 1479 • Windham, ME 04062 U.S.A
SHIPPING… Orders will be shipped promptly via FedEx or First Class U.S. Mail. FedEx Ground is our
standard method of shipment. FedEx Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver
(3 Day) Services are available upon request. All orders must be accompanied with Cash; Credit Card
Information; Money Order or Cashier's Check or they will be shipped FedEx C.O.D. (C.O.D. to Continental U.S.,
Alaska and Hawaii incurs an extra $8.50 fee per package. FedEx will accept cash as payment - FedEx requires a
Phone Number for C.O.D. deliveries as well as any upgraded delivery services). We request telephone numbers
and/or E-mail address when you order to provide the best possible service in case of questions. In an effort to
preserve your privacy, we do not sell our mailing lists. An F.F.L. (Federal Firearms License) is required for the
purchase of Complete Rifles, serial numbered Lower Receivers, or M16 components. Other parts and accessories do
not require special licenses. Personal checks are held 15 days to clear. No refunds after 15 days of invoice date.
Returned parts will incur a 20% restocking charge.
NOTE: FedEx has a mandatory “Adult Signature Required” (21 years or older) for all complete Firearms and
Lower Receiver shipments. This Adult Signature Requirement is a FedEx regulation and cannot be waived.
PISTOLS: Federal Law requires that all pistols be shipped by Air Service. FedEx’s mandatory “Adult Signature
Required” (21 years or older) will also be in effect.
DAMAGE: If your FedEx Package arrives damaged, you must alert the FedEx Driver, or call FedEx to notify
them of damage problems and to initiate a claim. The FedEx toll-free national telephone line for this purpose is
1-800-GO-FEDEX.
INTERNATIONAL ORDERS… Bushmaster will now accept International Orders of any amount, subject
to U.S. State Department (ITAR) and Dept. of Commerce regulations. Bushmaster does have established dealers in
countries outside the U.S.A. who may be able to supply your needs – contact Bushmaster for further information.
For Shipping Parts Only – within Continental U.S. Shipping to Puerto Rico and other Territories is charged at cost.
Shipping, Handling & Insurance Charges for FedEx Ground Service or U.S. Mail are:
$0.00 - $19.99 = $6.50 / $20.00 - $49.99 = $9.00 / $50.00 - $99.99 = $11.50
$100.00 - $249.99 = $14.50 / $250.00 - $499.99 = $18.00 / $500.00 and up = $21.00
For Shipping Complete Firearms – within Continental U.S.
Standard Rifle - FedEx Ground - $16.50 ea. / DCM Rifle - FedEx Ground - $19.50
Pistols - BY LAW - must be shipped by Air Service.
Free Shipping on backordered “Parts” only. Shipping Charges on parts orders over 20 lbs. will be calculated
by weight only using our Fedex published rates plus insurance of .50¢ per $100.00 value.
FedEx C.O.D. Fee – $8.50 per package. NOTE: FedEx will accept cash as payment for C.O.D.s
FedEx Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3 Day) Services are available upon request.
Order Instructions / Shipping Information 42 Orders – 1 800 998 7928
2008 Catalog Order Form Your fastest ordering method is on the internet at:
Ship To: [Link]
Name: ______________________________________________Customer No.:________________
(If available - see catalog label)
Address: ________________________________________________________________________
City: ___________________________________________________________________________
State: ______________________________________________________ ZIP: ________________
Telephone Number: ( ) ____________________ E-mail Address (if available) ________________________
Phone # and Email are optional. However, if any questions arise about your order, this will assist us in its speedy processing.
Method of Payment: ❑ Check or Money Order Enclosed (Personal Checks are held for 15 Days to Clear.)
❑ MasterCard ❑ VISA ❑ American Express ❑ Discover ❑ C.O.D.*
ALL CREDIT CARD ORDERS MUST INCLUDE PHONE NUMBER AND MUST BE SHIPPED TO ADDRESS WHERE CARDHOLDER RECEIVES CREDIT CARD BILLING.
If payment is made with ❑ Gift Certificate, please include Certificate Number: _____________
Credit Card Account No.: __________________________________ Date of Expiration: ________
Customer’s SIGNATURE: __________________________________________________________
*FedEx C.O.D. is available.
Ship Via: ❑ FedEx Ground (our standard method - other services available) Cash payment is accepted.
❑ U.S. Mail - PARCEL POST No C.O.D.s
( *) Phone Number is Required.

Have you ordered from us before? ❑ Yes ❑ No Would you like to receive future catalogs? ❑
PAGE PRICE
NO. QTY. PART NO. DESCRIPTION EACH AMOUNT

Shipping, Handling & Insurance Charges for Parts only - FedEx Ground Service or U.S. Mail:
SUBTOTAL
Other FedEx Services are available at extra cost - consult your salesperson.
$ 0.00 - $19.99 = $ 6.50 $100.00 - $249.99 = $14.50 Maine Residents Add 5% Sales Tax
$20.00 - $49.99 = $ 9.00 $250.00 - $499.99 = $18.00
$50.00 - $99.99 = $11.50 $500.00 and up.... = $21.00 Shipping, Handling & Insurance
Standard Rifle - FedEx Ground - $16.50 ea. / DCM Rifle - FedEx Ground - $19.50
Pistols must be shipped by Air Service. Shipping will be free on backordered “Parts” only. TOTAL AMOUNT
Shipping Charges on parts orders over 20 lbs. will be calculated by weight only
using our FedEx published rates plus insurance of .50¢ per $100.00 value.
FedEx C.O.D. Fee – $8.50 per package. (Note: FedEx will accept cash as C.O.D. payment - a phone number is req’d.).
Call about shipping orders to Hawaii, Alaska, Puerto Rico and other U. S. Territories.
SATISFACTION GUARANTEED, OR YOUR MONEY BACK. 999 Roosevelt Trail • P.O. Box 1479
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. Windham, Maine 04062 U.S.A

Phone Orders: 1 800 998 7928 43 Internet: [Link]

Customer Service, Exchanges, Backorders, Gunsmithing, Bushmaster Warranty…
NOTE: With the “Sunsetting” of the Gun Legislation of 1994, many features of “Pre-Ban” rifles
are again available - BUT not in all areas! California, Connecticut, Hawaii, Massachusetts, Maryland,
New Jersey, New York, Puerto Rico, and possibly others, all have their own Statutes regarding what
they call “Assault Weapons”. To avoid the possibility of legal problems, check your local laws before
purchasing some items offered in this catalog.
CUSTOMER SERVICE… Our telephone personnel are highly experienced and well informed firearms
enthusiasts. If you have any questions about Bushmaster products, you'll find a courteous member of our firm
willing and able to answer them - just call our Toll-Free Customer Service line (1-800-883-6229)
between 8:30 am - 6:00 pm, Monday through Friday, (E.S.T.). We will also be happy to promptly answer your
questions, or order inquiries, via E-mail to: Customerservice@[Link]
EXCHANGES… Should items you order from Bushmaster not be to your expectations, please contact our
customer service department for a Return Merchandise Authorization (RMA) Number. Unused items
may be returned within 30 days, include a copy of your invoice. Note: Any Custom Barrel Assembly - not
shown in catalog - may not be returned. No refunds allowed after 15 days of invoice date. Restocking
charge 20%. Include invoice with your return - its upper left corner can be used as return label. Return all pieces of
kits - wrap and package them securely. Insure package for your protection. Include the reason for return of each
item in an accompanying letter and we will do everything possible to speed your exchange.
BACKORDERS… We make every attempt to deliver your order from available stock - immediately. Should
there be a backorder on a part, we'll ship the bulk of your order and WE pay the shipping on the backordered part
(with the exception of complete rifles). FedEx Standard Overnight (1 Day); FedEx 2 Day and FedEx Express Saver (3
Day) Services are available upon request at additional charge. For C.O.D. Service from FedEx, please add $8.50 per
package (Note: FedEx will accept cash as C.O.D. payment).
BUSHMASTER GUNSMITHING… Our company policy is to offer gunsmithing assembly at no
charge when parts are purchased from us (with the exception of sight bases). We will also offer our
professional gunsmithing services to any customers who care to ship us their firearms or assemblies for repair or
buildup - and we will work on brands other than Bushmaster. Gunsmithing time is charged at $40.00 per hour, and
we charge a $16.50 fee for return shipping of your rifle, upper or parts ($19.50 for DCM Rifles due to extra weight).
For a gunsmithing estimate, please call 1-800-998-7928 or E-mail to: Techsupport@[Link]
BUSHMASTER LIMITED ONE YEAR WARRANTY… Bushmaster Firearms are warranted to
be free from defects in materials and workmanship. Any such defect of which Bushmaster Firearms International, LLC is
given written notice, as provided below, within one year and ten days from the date of first purchase by a customer will
be remedied by Bushmaster Firearms International, LLC. This warranty is granted by Bushmaster Firearms
International, LLC, P.O. Box 1479, 999 Roosevelt Trail, Windham, Maine 04062.
To initiate a Warranty claim, call Bushmaster Customer Service (toll free: 8:30 AM to 6:00 PM E.S.T. - Monday thru
Friday 1-800-883-6229) to get an RMA number (“Return Merchandise Authorization”). Warranty claims should state (in
writing) the model and serial number of the firearm concerned, a description of the difficulty experienced, and the date of
purchase. The firearm concerned should be shipped (transportation charges prepaid), to the Warranty Service
Department, Bushmaster Firearms International, LLC, 999 Roosevelt Trail, Windham, ME 04062. Firearm
shipment should be insured by the owner, as Bushmaster Firearms International, LLC will accept no responsibility
for loss or damage in transit.
Shipping and insurance charges for the return of a firearm to its owner will be paid by Bushmaster Firearms
International, LLC if the related claim is a proper claim for warranty work.
Under no circumstances shall Bushmaster Firearms International, LLC be responsible for incidental or
consequential damages with respect to economic loss or injury to property, whether as a result of express or
implied warranty, negligence or otherwise. Some states do not allow the exclusion of limitation of incidental or
consequential damages, so the above limitation may not apply to you. Bushmaster Firearms International, LLC will not be
responsible for the results of careless handling, unauthorized adjustments, defective, low quality, reloaded, or improper
ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use. Furthermore, the liability of Bushmaster
Firearms International, LLC under this warranty shall be limited solely to the obligation to repair or replace the firearm,
and to pay transportation and insurance charges for return of the firearm to owner.
NOTE: Handguns and long guns are classified as FIREARMS or DANGEROUS WEAPONS. Guns are surrendered by
Bushmaster Firearms International, LLC with the express understanding that it assumes no responsibility for resale
handling under local laws and regulations.

A NOTE REGARDING LEAD… Discharging firearms in poorly ventilated areas, cleaning firearms, or handling
ammunition may result in exposure to lead, a substance known to cause birth defects, reproductive harm, and other serious
physical injury. Have adequate ventilation at all times. Wash hands thoroughly after exposure to lead.
Phone Orders: 1 800 998 7928 44 Internet: [Link]
PISTOL GRIPS & BUTTSTOCKS… ErgoGrip
A2 Standard Pistol Grip… Tactical Deluxe
(9349127) $12.95 Standard Pistol Grip…
issue A2 hollow pistol grip of (SCH4045) $42.00
molded black plastic – with This is a heavy,
raised finger ridges, checkered comfortable
panels and a ribbed backstrap. ambidextrous grip that fills the hand
Pistol Grip Screw & Washer… well, and mounts universally to any
Screw… .65¢ (AN501D416-18) AR15/M16 rifle lower receiver. It is
Washer… .45¢ (MS35335-61) injection molded with an overmolded
rubber Sure Grip™ textured finish, and
offers a raised rear extension for improved hand web
Pistol Grip Plug… (SCH-5) $4.50 support and weapon control. It offers great durability as
Turns any standard A2 pistol grip into a it is virtually impervious to oils and solvents.
“stowaway” grip for storage of small
items. Molded of black rubber, snug AR15/M16 Tactical Grip… $63.95
friction fit holds it inside the grip cavity. (ARG01) The ultimate tactical grip for
the AR15, this adjustable palm swell
Hogue AR15/M16 Pistol Grip… (15000) $31.95
We use this comfortable, ambidextrous, textured rubber style grip adapts easily to different sized
grip on our Varminter. Its an easy, one screw installation hands and puts pressure in the palm of
on your AR15/M16 (don't lose the safety detent the hand to allow a deliberate and
or spring when changing over!). Hogue also calculated trigger pull. Molded of
offers companion free-floater forends (see heavy black plastic, it installs
details in the Handguards section). easily on any AR15/M16.
Pistol Grip only… (15000) $31.95
Rifle Forend only… (15002) $79.95
2 Piece Set… (Grip and Forend)
For Rifle… (15003) $106.95 Bushmaster Modular
For Carbine… (15013) $106.95 Accessories System Forward
Carbine Forend only… Pistol Grip Assembly… $42.50
Includes special gas tube… (15004) $79.95 (9349127-FWDGRP) This forward
grip combines a rail mount clamp
First Samco Tactical with a standard AR A2 composite
Stow Grip…$25.95 plastic pistol grip that allows easy
(FBS-G27) Comfortable mounting onto the Picatinny rail section
and ambidextrous, this of various rail accessory systems.
“G27” type storage grip is molded
from a synthetic material proven to ErgoGrip Vertical Forend…
minimize slippage when wet. Its (ARG-FWD) $52.95 Mounts to
extended beavertail and finger ridges all Picatinny rail and Weaver
provide excellent control - locking insert base type rails, this
seals its internal storage compartment. ergonomically designed forearm
grip offers comfort and fire
Bushmaster Modular control. A hex nut through an
Accessories System Solid aluminum mount block clamps
Vertical Forearm Grip… the grip solidly onto the rail.
(YHM-9400) $36.95 This
heavy duty “broomstick” style foregrip
slides onto Picatinny rail forends and
rail accessory systems. It tightens with AR15/M16A2
few twists to lock down to the rail. Stowaway Grip…
Adds stability to your weapon’s (56PT87SPG2) $13.95 This
handling, and helps control muzzle rise M16A2 configuration grip – with
in rapid fire. a serrated backstrap and finger
groove – features a trap door
The “Gapper”... $3.95 storage compartment for holding
(SCH4085) Fills that cleaning gear or small parts.
blister causing void between the pistol grip and the back of the trigger
guard - molded of flexible black polyurethane. Fits snugly, or can be glued in
place. Greatly increases grip comfort (shown at left separately, and installed).
Pistol Grips & Buttstocks 45 Orders – 1 800 998 7928
PISTOL GRIPS & BUTTSTOCKS Magpul Mission Adaptable Grip (MIAD)… (MAG050-BLK)
Command Arms Ergonomic $35.95 This pistol grip kit has removable / replaceable front
Vertical Foregrip… and rear panels for a “multiple hand size”custom fit. Features
(FBS-AVG) $19.99 An ergonomi- improved ergonomics and positive
cally designed tactical vertical grip rough texture on sides and rear
that facilitates a natural fighting backstraps, a waterproof
stance hold on your rifle. It offers removable base cap that allows
improved performance and reaction storage of 3 - .223 cal. rounds
time, reduces “on target” time, and or batteries / small parts.
increases muzzle control during Kit includes small, medium
rapid fire. The design fits the hand and large backstraps; 2
well with finger grooves, and includes a plugged frontstraps, a 3 round core
storage compartment for small parts/batteries. plug, and installation
Weight is .34 lbs., it fits all Picatinny Rails, and hardware. Weight:
carries a Command Arms Lifetime Warranty. .190-0.260 pounds.
Command Arms Flashlight Grip Adapter … (FBS-FGA) $69.99 This multi-tasking
foregrip combines a flashlight mount for 1" diam. lights, and vertical grip all in
one – as well as including an accessory rail section that serves as a laser
mounting point, and a battery or small parts storage compartment within
the grip (accessible by removing the screwcap on the base. A thumb
activated push button on the back of the grip operates the flashlight’s on/off
switch and allows for signaling. Removable side plates on the grip utilize a rubber surface to enable
installation of a pressure switch underneath the side plate. Fits all Picatinny Rails, clamps on with
thumbnuts for a “no tools” installation, and has Command Arms’ Lifetime Warranty.
Command Arms CBS 6 Position
Collapsible Stock… (FBS-CBS) $60.49
Tested and recommended by the NTOA (National Tactical
Officers Association), this Six Position Collapsible Stock with
a rubber, non-slip recoil pad, features a Picatinny Rail Block
and a Storage Compartment for CR123 batteries (4 total) or
other small items. Rail Block and Compartment are ambidextrous in
design and easily switched from side to side. Two metal inserts (the
round cutouts front and rear) allow for the addition of optional Q.D. sling adaptors.
Command Arms CBS Stock with Extension Tube, Spring & Buffer … (FBS-CBSK) $122.95
All parts needed for a complete swap-over from a standard A2 stocked rifle to this new
Command Arms CBS 6 Position Telestock configuration.
Command Arms ACP Adjustable Cheek Piece…
(FBS-ACP) $29.99 An Adjustable Cheek Piece for the CBS Telestock above, it
slides onto the Picatinny Rail Block, and offers height adjustment for eye
alignment with optics, and horizontal adjustment along the tele’s side rail. Molded
from reinforced polymer, this cheekpiece is ambidextrous with mounting options for
either left or right handed shooter. It carries the Command Arms Lifetime Warranty.
Command Arms Saddle for Bushmaster Telestocks… Bushmaster
(FBS-SST1) $21.99 For fast target acquisition, this light weight, Modular
ergonomically designed cheekrest saddle fits new style BFI Accessories
Telestocks as well as others. Improves cheek support and head System Folding Foregrip… (YHM-9640)
stability while aiming, eliminates head movement $79.50 The mounting base on this
and fatigue associated with broomstick
extended sighting-in. style grip
Waterproof storage incorporates
compartments for cleaning a push-button
gear, or six CR123 mechanism for
batteries, are molded in fast deployment. The base
and sealed with O-rings. mounts to any Picatinny rail
Sling loops are incorpo- with one Allen head screw –
rated into the mounting can be mounted to fold the grip
blocks. Lifetime Warranty forward or backward according to
from Command Arms. preference or other accessory usage.
Pistol Grips & Buttstocks 46 [Link]
PISTOL GRIPS & BUTTSTOCKS… Camouflage Finished Pistol Grip/Buttstock/Handguard
Sets… These 3 Piece Sets - or individual parts - can now be added as accessory items to your rifle or carbine. High
quality, tank dipped parts in either Desert Camo or RealTree® Camouflage Pattern - see color pictures in Accessories.
Magpul PRS Precision Rifle Stock… (MAG300-BLK) $255.00 The Generation II Precision Rifle Stock (PRS™) is
designed to be a field precision stock. Adjustable for both height and length of pull. At it's shortest LOP it is about the
length of an A1 type Stock and extends about 1/2” longer than an A2 stock. It features a billet machined buttplate
with a rubber butt-pad, mil-spec phosphated steel shafts, and aluminum ball detent knobs. The body features a
removable end cap and an integrated Picatinny rail mount (for use with monopod). The PRS easily replaces the
standard AR15/M16 stock and uses stock A1/A2 rifle length
receiver extension without the A2
PRS Stock w. Slip-on LimbSaver spacer – comes with all mounting
Recoil Pad mounted hardware and two ambidextrous
(sold separately) 1.25” sling loops that can be
positioned front or rear. Adjustment
dials have machined aluminum knobs on corrosion resistant
stainless steel shafts with positive click detents. Weight: 1.855
pounds / Retracted Length: 10.45" / Extended Length: 11.45" /
Height Adjustment: 0.75" / Rubber Butt-Pad Thickness: 0.25"

LimbSaver Slip-on Recoil Pad…

(Limbsaver-M) $36.99 A slip-on recoil pad
that offers easy installation, recoil-reducing PRS Stock- left side
showing Std. Buttpad
technology and molding from proprietary NAVCOM™ and sling loop
Noise and Vibration Control Material. Displace shock on a
0 to 2500 Hz spectrum and ensures maximum shock relief with excellent protection for the shooter. Fits stocks from
4 13/16” height X 1 5/8“ thickness up to 5 1/8” X 1 3/4“, and the 1” thick pad will add 1” length to trigger pull.
Bushmaster Stubby Stock… $69.50 (9349119-S-KIT) Complete A2 Trapdoor Buttstock
with Carbine Buffer Assembly… $79.95
and Action Spring (A2 STK COMP )
This version of the
standard A2 buttstock
(3.25" shorter) makes the AR type
rifle easy to carry in confined quarters -
not much longer than a compressed
telestock, but just long enough to be legal length
with 16" barrelled guns and sized well for women
and younger shooters. Comes complete with carbine
length Buffer and Spring. A standard rear sling loop is The newer A2 design is 5/8" longer than original A1 for
mounted, and the solid buttplate (no trapdoor greater shooting comfort and improved trigger pull length
storage compartment) is smooth and comfortable on of 13.5". Trapdoor storage space in the buttstock provides
the shoulder. Length 7.25 inches / Weight 14.6 oz. room for spare parts or an Otis Buttstock Stowage
Complete Bushmaster Lower with Stubby Cleaning Kit (see our Gunsmithing Section). Includes
Stock… M.S.R.P. $340.00 (A LOW STUBBY) An FFL Buttstock w. Trapdoor Buttplate, Sling Loop, Buffer, Buffer
is required for purchase - or see your FFL Dealer. Tube, Buffer Spring, Spacer and Vented Buttplate Screw.
Hook Style Delta Style Stock
Buttstock for Cheekpiece
AR15/M16... $44.95 $74.50
(16-01-02) A molded fiberglass (6200)
polymer stock offering the eye relief of the A quality
newer M16A2 type with 1“ additional length accessory for your
of pull. The “hook” gives added stability to A2 buttstock - designed to
sandbag rest when shooting with left hand across the body improve accuracy by eliminating
and into the hook. Uses the standard issue buttplate but offers parallax problems. It shoulders easily and provides
almost double the storage - easily replaces the standard stock. the proper cheekweld for telescopic sight use.
Complete Hook Style Buttstock Assembly… $95.50 Installs with no alteration to original butt cap or
(AR STK ASSY CHO) Includes Stock, Trapdoor Buttplate sling loop, and is designed specifically for the new
Assembly, Buffer, Buffer Tube, Buffer Spring, Spacer and Screw. style A2 stock (can be modified to fit the A1).
Pistol Grips & Buttstocks 47 Orders – 1 800 998 7928
PISTOL GRIPS & BUTTSTOCKS…
Six Position Fiberite Telescoping Stock Assembly…

$106.95 Original Style Fiberite

(1005-087-8988-PK) TeleStock Assembly…
Our standard telestock – a (ALEO-001K) $106.95 This is
heavy duty design incorporating a six the original style fiberite telestock body with a
position latch assembly – its ribbed body offers four position telescoping aluminum extrusion extension
extra strength. A six position receiver extension tube. An original design metal telestock buffer with
is machined from solid aluminum extrusion – its lower cylindrical weights, and the carbine length buffer spring
lip face acts as a timing edge to insure the buffer are included. Always use a Telestock Assembly Wrench
retainer is held correctly and the extension is positioned for tightening the extension tube onto your lower –
correctly. An original design metal buffer with available in our Gunsmithing Section.
cylindrical weights is included, and a sling loop is fitted AR15/M16 “Skeleton” Stock... $112.95 (SKELETON STOCK)*
in the standard position - alternately “top” slings can
be a attached through the slotted body.
Also … Complete Fixed Position Tele-Style Stock
Assembly… (1005-087-8988PEK) $106.95 Includes
Carbine Length Receiver Extension, Buffer and Spring.
The “Skeleton” Stock - this radically different stock design
for all AR15 type rifles offers a comfortable neoprene foam sleeve
and a skeleton frame that slides on to the existing buffer tube of your rifle, then clamps tight with
a new buttplate screw and the skeleton frame screws. A comfortable rubber buttplate is included, as is a swiveling
sling loop that can be mounted forward left, or right, or on the bottom of the buttplate. Length 10.5" / Weight
14.03 oz. (*This does not include buffer tube, buffer or spring - use already existing parts or buy the kit below).
Skeleton Stock Kit for Changeover from a Shorty Skeleton Stock Kit including CAR Buffer
Tele-stock... $154.95 (SKELETON-STOCK-K) The and Spring… $148.95 (SKEL-SH-STK-KIT) Similar to
Skeleton Stock is also available as a kit for those the original Skeleton Stock above, but with an overall
wishing to swap over from a telestock - includes length of 7 3/4” - weight of 12.8 oz. The neoprene
Skeleton Stock with Buttpad and Hardware (as above) sleeve around the buffer tube offers a comfortable
plus standard buffer tube, standard buffer and spring. cheek weld. A 1/2” rubber recoil pad, a sling swivel
(mounts either left or right side, or on buttplate base), a
short Buffer Tube, a CAR Buffer and Spring, and all
necessary screws are included to swap over from any
AR type rifle or carbine.

Replacement Foam Sleeves for Skeleton For those who already own a CAR
Stocks... For Standard Length model above. $4.50 Buffer and Spring, the Shorty Skeleton Stock without
(SKEL-FOAM-OT-8.2), or for the Shorty Skeleton Stock those parts is… (SKEL-SH-STK) $134.95
shown below… $3.95 (SKEL-FOAM-OT-5.5)
NOTE: These sleeves install easier with WD40. Carbon 15
Skeleton Stock Extended Recoil Youth Sized
Pad… (SKEL-1IN-BUTTPAD) $13.95 This Buttstock…
extra thick, molded rubber Recoil Pad fits (AZ15279) $26.50 Perfectly sized for the
all the Skeleton Stocks including the younger shooter, or smaller woman, this
Shorty Model. 1 inch in thickness, and 3.2 Carbon 15 molded buttstock easily replaces
oz. in weight, for extra shooting comfort the standard stock on Bushmaster Carbon 15 rifles by
and extra trigger pull length. Installs easily releasing the receiver locking lever (will not fit C15
in place of existing pad – screws are Pistol receivers). It’s 8 1/4" overall length yields a
included. trigger pull length of 11 1/4".
Pistol Grips & Buttstocks 48 [Link]
PISTOL GRIPS & BUTTSTOCKS… Cheekpiece for
Cheekpiece for older Fiberite
Bushmaster TeleStocks
Six Position $37.50 (7000)
Telestock This telestock
$37.50 (7200) cheekpiece allows
Designed to offer the use of scope,
excellent cheekweld and laser, or night vision devices
appropriate head position for with comfort. Molded of tough
scope and optic use, it fits the black plastic, it snaps on to most older
newer Bushmaster Six Position “ribbed style fiberite telestocks with a secure pressure
body” telestocks (shown on Pg 49). It snaps fit and features a built-in watertight small parts storage
securely onto the telestock body with compartment that is sealed with an o-ring screw-in plug
molded projections that lock into the rib indentations at top rear of the unit). This assembly will help take all the
and includes a watertight small parts storage “rattle” out of fiberite telestocks.
compartment in the upper portion of the cheekpiece, Note: For use on Fiberite Telestocks - will only fit
sealed with a rubber o-ring screw-in plug. the original type telestocks (as shown here).
Rubber TeleStock Butt Pads… These molded black rubber pads
securely fit the buttplate of the TeleStock to offer recoil reducing
comfort and positive, non-slip shouldering.
A.) For new “ribbed” style TeleStocks…
$20.50 (Part # 2698828)
B.) For older style TeleStock… Also fits the
Carbon 15 Rifles with the original design
buttstock - can be modified to fit new reinforced A.
B.
Carbon 15 Buttstock… $16.95 (Part # 2698827)
Extended Buttplate for AR15/M16... $24.50 (16-09-02) This glass-filled, black plastic composite
buttplate adds 1 1/4" length to the standard issue AR15/M16 buttstock - replaces the existing
buttplate (Note: It does block access to the buttplate trapdoor). It also fits on the Stubby Stock.
INDIVIDUAL A2 SOLID BUTTSTOCK PARTS… 9349119
Includes Stock,
A2 Solid Buttstock ......................... (9349119) $37.50 Trapdoor Buttplate
Trapdoor Buttplate Assembly A2 ... (9381380) $21.50 & Sling Loop
Buffer - Standard ........................... (8448615) $15.95
Stock Spacer & Screw ....... (A2 STK SPAC/SCRW) $6.50
A2 Buttplate Screw ........................... (9349128) $3.50
A1 Buttplate Screw ........................... (8448627) $3.50
Receiver Extension - Std. A2 ....... (8448581) $21.95
Buffer Spring (Standard) ................ (8448629) $5.95
INDIVIDUAL TELESTOCK PARTS…
Buffer - Telestock ................. (1005-914-4578) $16.95
Buffer - Telestock - heavy weight for the M16M4
machine gun) .......................... (8448730-M) $26.50
Buffer Spring (Telestock) ........ (1005-914-4564) $5.50
CAR Receiver Extension .... (1005-914-2929-6) $26.50
(for the newer style 6 Position Telestocks)
Telestock Locking Nut ........... (5310-917-1154) $7.50
(for the newer style 6 Position Telestocks)
CAR Receiver Extension .... (1005-914-2929-P) $26.50
(for old style 4 Position Telestocks)
Telestock Locking Nut ........... (5310-917-1153) $7.50
(for old style 4 Position Telestocks) Telestock
Telestock Receiver Plate ....... (1005-914-2942) $7.50 Bodies are
Telestock Slide Locking Pin ... (1005-914-3229) $6.50 NOT available
Telestock Lock Pin Spring ..... (1005-916-9178) $1.00 separately.
Telestock Latch ................... (1005-087-8987P) $7.50
Telestock Lock Pin Nut ...... (5310-917-1215) $4.50
Telestock Lock Pin Roll Pin ...... (MS16562-106) $.50
Pistol Grips & Buttstocks 49 Orders – 1 800 998 7928
HANDGUARDS & ACCESSORIES… Rifle Length
Bushmaster Modular Accessory
System Four Rail Split Handguards
For Carbine… (YHM-9670) $191.50
For Rifle… (YHM-9803) $212.95
The two piece design of these
B.M.A.S. Handguard Sets allows quick
and easy installation of a Picatinny
Four Rail Accessory System on most AR type Rifles*. Machined of quality
aircraft aluminum, they snap right in place of standard carbine or rifle
handguards, and offer four full length Picatinny rails for the flashlight/laser
sight accessories of your choice. Rails are positioned at 12 - 3 - 6 - 9
o'clock, and the top handguard can be used in conjunction with an M203
Grenade Launcher. They’re vented to keep your barrel cool, finished in mil.
spec. matte black anodize to eliminate glare and protect against corrosion.
*Note: These sets will not fit our DCM, .308 Rifle, or Gas Piston Carbine. Carbine Length

Bushmaster Modular Accessory System Four-Rail Free Floater Forearms… Rifle Length (YHM-9480) $169.95
Four-Rail Carbine Length Forearm
(YHM-9479) $148.95
Four Picatinny rails are machined
into these free floating forends to
offer your AR type firearm unlimited
mounting options for sights, scopes, grips, lights, and lasers. Venting
slots all around aid in barrel cooling, and rail front edges are drilled
and tapped to accept the B.M.A.S. Swivel Sling Stud (Note: That
stud would not function as a bipod mounting point). These forends
are machined from aircraft quality aluminum and hardcoat anodized
to mil. spec. The rifle model fits 20" and longer barrels; the carbine
version is designed for 16" barrels. Assemblies include forearm, barrel nut and jam nut. (barrel disassembly is
required for installation). *Note: This unit will not fit our .308 Rifle, or Gas Piston Carbine.
Bushmaster Modular Accessory System Integral Flat-top Forend…
For Rifles…
(P-12) $292.95
For Carbines… (P-4) $250.00
This Forend System is designed to fit the A3
type “flat-top” rifles or carbines, and mounts
using a replacement barrel nut
(included - major disassembly of rifle
required). With the new barrel nut in
place and aligned for the gas tube, the Forend slides onto the A3
Upper’s rail, then locking screws and a “locking block” clamp it
firmly in place. This system free-floats the barrel, and features a
sling mounting plate with swivel stud. This strong and light
weight forend system is machined from aircraft aluminum,
finished in matte black hard anodized, and vented to keep barrel heat to a minimum. Our BMAS Low Profile Rear
Flip-up Sight (YHM-9680) is designed to fit behind this unit on the A3 Upper. The P-4 Carbine length model will fit
on our A3 Gas Piston Carbine as it offers enough clearance over the gas piston housing.
Bushmaster Modular Accessory System Handguard Rails… Add an accessory mounting point to
any standard rifle or carbine handguard with these Picatinny configuration Rails. Mounting
requires removal of handguard and inner shield - they are screwed to the handguard
through the existing vent holes. These anodized aluminum Rails are tapered
so that mounted accessories will be on a level plane with barrel
and bore, and vent holes align with existing handguard vents
for proper barrel cooling. The Car Length Rail will fit on a Rifle
length handguard. Due to possibility of movement, we do not
recommend installation of optics or lasers on these rails.
B.M.A.S. Rail for Rifle Handguard… (YHM-Hgd-Rail-Rif) $60.50
Handguards not included. B.M.A.S. Rail for CAR Handguard… (YHM-Hgd-Rail-CAR) $40.50
Handguards & Accessories 50 [Link]
HANDGUARDS & ACCESSORIES…
First Samco M44 Four-Rail Handguard Set
M44 Set for Carbine… (FBS-M44S) $112.99
M44 Set for Rifle… (FBS-M44L) $136.99
First Samco produces this quality Handguard Set
featuring four Picatinny Rails hidden under four
removable rubber rail covers. The rails – positioned
at 12-3-6-9 o'clock – offer unlimited accessory
attachment, and the rubber covers add excellent
grip comfort and protect the rails when not in use.
Internal metal heat shields dissipate rapid fire heat.
A handguard tool (see our HGD-Tool) is
recommended for installation. Photo shows
Carbine Set mounted with left side and
bottom rubber covers removed.
First Samco M33 Carbine Handguard Set… (FBS-M33) $89.95
The First Samco Two Rail Handguard Set for Carbines features
integral Picatinny rails under removable rubber covers. You can
install this handguard set so as to position the rails vertically
(12 and 6 o'clock) or horizontally (3 and 9 o'clock). Molded
of high density black polymer, with stainless steel heat
shields and comfortable rubber rail covers - this set is
available in Carbine length only - a direct snap-in
replacement for standard guards.
Sure-Grip Panels for Multi-Rail Forends… Black rubber grip panels for all rail forends - with Bushmaster
logo molded in. They snap tightly onto the rails for a non-slip
grip, rail protection and handling comfort.
A. Sure-Grip Full Length Rail Cover… $10.95 ea.
(SCH-6L) 5 3/4" long for full length coverage on carbine
forends. Covers fifteen rail slots. Molded of black
A. B. rubber with 3 Bushmaster logos between raised ribs.
B. Sure-Grip 1/3rd Length Rail Cover… $3.50 ea.
(SCH-6) 1 3/4" black rubber grip panel (covers five
rail slots) for Picatinny rail forends – with BFI logo.

Low Profile Rail Covers… A. Five Slot Low Profile Rail Cover… (SCH-4370) $3.95 ea.
B. Full Length Low Profile Rail Cover… (SCH-4373) $11.95 ea.
These covers protect your hands from sharp rail edges, provide a
very smooth, low profile appearance, and protect rail areas
A. (1 3/4”) from damage. Molded of Black Santoprene in two lengths -
B. (6 7/8”) easily cut for custom applications.
Carbine & Rifle Length M203 Handguards… AR15/M16 Handguard Tool… (HGD-Tool) $21.95
The bottom of these handguards are open to allow This handy tool provides the
attachment of the M203 Grenade Launcher or similar leverage needed to compress
type flare launchers. Both are Government issue, the weld spring inside the
molded black nylon with internal aluminum heat delta ring, and eliminates
shields. For installation, the need for a second pair of
they’ll snap into the hands to help remove AR15/M16
handguard cap and two-piece handguards. We use this
delta ring in place of tool frequently at the Bushmaster
standard handguards. plant. Its manufactured from
strong, powder coated, 1/4"
round steel stock with protective
vinyl coatings in all critical contact
areas - won’t scratch the receiver.
CAR M203 Handguard… (12990563) $51.50 Works well on both straight and
Rifle M203 Handguard… (8448377) $46.50 tapered delta rings.
Handguards & Accessories 51 Orders – 1 800 998 7928
HANDGUARDS & ACCESSORIES…
ARMS #51C Slimline S.I.R. SYSTEM for A1/A2 The ARMS S.I.R. System
Carbines with Solid Carry Handle… $429.95 (Selective Integrated Rail) is
(ARMS-SIR51-C) a high quality technical forend for the
AR15 Type Carbine that combines barrel
free-floating, light weight, and a multitude of
accessory attachment rails. Slimline Model 51C in
the ARMS S.I.R. System is intended to fit the
A1/A2 Solid Carry Handle Carbines, leaves the
barrel totally free-floating from the barrel nut
forward, and is approximately 1/4" narrower than
other S.I.R. System models for a more comfortable
grip. The S.I.R. Model 51C clamps solidly onto the Upper
Receiver’s fixed carry handle (both the carry handle channel and the
handle front support, utilizing two A.R.M.S.® self locking thumbnuts) to provide an extremely rigid
fit with no movement of rail or attachments. The extended bi-level rail platform will mount various scopes, and
red-dot or holographic sights, and offers the possibility of forward mounting optics to co-witness with the iron
sights through the channel in the upper rail. Total weight is 18.9 oz. including the two side and one bottom
accessory rail segments and sling swivel. These parts can be removed or added as needed. No gunsmithing is
required for installation – NOTE: This will not mount on the A3 Removable Carry Handle.
For alternate optics mounting options for the A1/A2 solid carry handle carbines, see also the A.R.M.S. #39A2
Bi-Level Rail… (ARMS 39) $148.95 in the Sights, Scopes, Mounts Section of this catalog.
A.R.M.S. #50 M-CV S.I.R. System for A3 Carbines… (ARMS-50M-CV SIR) $319.00 Carbine length
5.56mm/.223 cal. “Free-Float”system that can be installed in less than 5 minutes directly to the standard barrel nut
(without the Delta Ring). The Front Sight, Gas Tube, Front Handguard Retaining Cap, Barrel, and Barrel Nut do not
need to be removed for installation, and no special tools are required (the S.I.R. Std. Sling Swivel is useable for
installation as it is ground with a “screwdriver
blade” on its end). Perfect alignment with the
receiver can be accomplished via built in
alignment anti-rotation locking tabs. The 50
M-CV system weighs 8.6 oz., includes Q.D.
indirect air flow heat shields and throughly
vented for superior barrel cooling. Rail
Segments at the 3, 6 and 9 o’clock positions
can be exchanged, repaired or replaced
without removing the top rail.
Hogue Free-Floater Carbine and Rifle Forends… Sold as a Set with the Hogue Overmolded Rubber
Pistol Grip, or pieces priced individually:
Rifle Forend Only - (15002) $79.95 Hogue
Grip
2 Piece Rifle Set - (15003) $106.95
Carbine Forend Only - (15004) $79.95
(Includes a specially bent Gas Tube)
A unique Hogue Carbine For
end 2 Piece Carbine Set -(15013) $106.95
aluminum forend with a central Pistol Grip Only - (15000) $31.95
rubberized band for ergonomic comfort and
insulation against barrel heat and vibration. Installation requires removal of the front sight and barrel nut. This
Two-piece Forend will fit our Dissipator models. The Hogue companion pistol grip is available (shown above right).
Vented Free-Float Tube Forend...
(VAR-01K) $95.95 This vented,
free-floating, three piece forend (we use
it on our Varminter and Predator Rifles)
can be easily installed for improved
accuracy on your rifle. A new barrel nut and locking ring replace your existing barrel nut (front sight, gas tube and
barrel nut removal is required). The aluminum free-float tube screws on, and after “timing” the cooling vents, a
locking ring holds it in position. The center of the tube is knurled for a non-slip grip, and a standard stud is included
for bipod or sling. All three parts are high quality aircraft aluminum - black anodize finished. Also available:
.308 Free Floater Forend… For Rifles (VHG-3R) $106.95 / Carbines - Mid-Length (VHG-3M) $101.95
Handguards & Accessories 52 [Link]
HANDGUARDS & ACCESSORIES…
A2 Rifle Handguards… $21.95/pair
(9349059) Compression molded of black
composite polymer material (not injection
molded - these will not melt during full auto or
rapid fire). They have a non-reflective matte black
finish, and are designed to fit rifles with the Triangular Handguard Cap.
Internal Aluminum Heat Shields are included to protect hands from barrel heat buildup.
Triangular
A2 Carbine Length Handguards… Round
Handguard
Handguard
Cap
$21.95/pair (1005-914-4572) Manufactured Cap

of black compression molded composite

polymer construction as above – internal M4
Handguard
aluminum heatshields included. These can only Cap for use
with M203
be used with the Round Handguard Cap.
NOTE: Rifle Length Handguards fit into the Triangular Cap.
Standard Carbine Handguards fit into the Round Cap. M4 (Oval Profile) Carbine Handguards fit into either the
Round Cap or the “notched” Round Cap. See Handguard Cap prices and part numbers - Page 30.
M4 Dual Heatshield Handguards… $45.50/pair
(1005-914-4574) The M4 type Handguard is more oval Detail Photo
in shape and taller in cross section, and the dual of the Dual
heatshields effectively increase barrel cooling, especially Heatshields
in rapid fire. Originally designed for use on full-auto
machine guns, this improved handguard set will fit most
carbines with either type of round handguard cap. Molded
of black thermoplastic composite material with heavy dual
aluminum shields (one finished black / one silver).
M4 Handguards with Single Heatshield … $42.50/pair (1005-914-4573)
Bushmaster DCM “Free-Floater” Kit – a Barrel Nut / Free-Floater Tube / Handguard Combination…
(9349059CGA) $159.95 This forend system meets all regulations for DCM Competition, and free floats the barrel
from Barrel Nut forward for optimum accuracy.
A Sling Swivel Loop is mounted onto the
front of the tube – Handguards, Delta Ring,
Weld Spring, Snap Ring and a Special Gas
Tube are included.

As installed on DCM Rifle

DCM Free-Floater Tube / Custom Gas Tube Set… (2698823) $132.95 Add your own rifle length handguards
to this Competition free-float tube – includes a
custom bent gas tube. Minor modifications to
handguards are required for fitting, Upper
Receiver disassembly and Front Sight removal
are necessary for assembly onto rifle.

Bushmaster V Match “Free-Floater” Tubular

Aluminum Forends... These hard anodize finished
aluminum assemblies fit over standard and match
profile barrels “free-floating” them from Receiver forward for
V Match Free-Float Forend… optimum accuracy. They are screwed directly onto the Upper Receiver
in place of existing Handguards, Barrel Nut and Handguard Cap.
For Rifles… (SGW-02) $63.95
Installation requires removal of the front sight base - will not fit on
For Carbines… (SGW-01) $63.95 Dissipator Barrels.
Handguards & Accessories 53 Orders – 1 800 998 7928
HANDGUARDS & ACCESSORIES…
SureFire G2™ Nitrolon® Flashlight… $36.00
(G2-BK) A compact (palm size) high-intensity
incandescent flashlight for tactical, self-defense, and
general use with a tough polymer body. Its smooth, brilliant, pre-focused
tactical-level beam has four times the light of a two D-cell flashlight - bright enough to temporarily
blind and disorient an opponent. Small size, light weight, and high output make it a perfect everyday carry light.
• Rugged, lightweight, corrosion-proof Nitrolon polymer body (Black Part Number listed here - Olive Drab, Tan or
Yellow flashlights available on special order).
• O-ring sealed, weatherproof • Tailcap switch: press for momentary-on, twist for constant-on • Switch lockout
prevents accidental activation during transport or storage • Max Output: 65 lumens
• Runtime: 60 minutes • Length: 4.90”/Weight: 4.1 Oz. • Battery: Two 123A Lithium
SureFire G2™ Nitrolon® Flashlight… $36.00 ea. Black Body (G2-BK)
SureFire M79 Flashlight Mount… $38.00 (M79) A sturdy aluminum and polymer
mount that will clamp any 1” diam. flashlight (such as G2 above) to any rifle or carbine
equipped with a Picatinny accessory rail. A heavy knurled thumbscrew clamps the unit
onto the rail and flashlights are held with an adjustable cam-type locking clamp.
SureFire Scout Light M600B… $310.00 (M600B) This two-battery Scout Light
from SureFire clamps to any Picatinny rail by means of a
knurled thumb screw on its rigid M75 rail mount. A powerful
LU60A incandescent lamp module produces 65 lumens of
light. A momentary-on remote tape switch is included as well
as a tail cap on/off switch. Includes • Two SureFire Lithium
SF123A 3.0 Volt Batteries (10-yr. shelf life) • Output/Runtime - Max.
Output of 65 lumens with a 60 minute runtime • Click on/off and
momentary switch • MilSpec Type III hard-anodized aluminum body
SureFire M910A-WH Vertical Foregrip Weaponlight…
The SureFire Millennium M910A Vertical Foregrip WeaponLight
attaches to Picatinny rail interface-equipped weapons via a
built-in dual thumbscrew mount. Each unit is equipped
with five separate switches: (1) two pressure-sensitive
momentary activation pads to control the main battle
light – one on each side of the grip for ambidextrous
operation (2) a constant-on switch (3) a system disable
switch to lock the light in the OFF position for covert operations or to eliminate accidental light
activation during storage, and (4) a third, smaller momentary switch to control two low-output
LEDs that are useful whenever there is a need for a very small amount of light (stealth
navigation, night-time breaching operations, etc.) FEATURES • Batteries – Three SureFire
Lithium SF123 3.0 Volt (10 year shelf life) • Lamp Assembly/Runtime – SureFire MN10
Xenon/Halogen gas-filled lamp assembly with 125 lumens output for 60 minutes • Construction
of Nitrolon® (a non-conductive, impact-resistant, aramid glass-filled polymer) • Pyrex® lens
window • Shock-isolated aluminum bezel with hard-anodized finish • Secondary, white LED
navigation lights with separate switching • Flawless white beam, always in focus • Light output
bright enough to temporarily blind an opponent $543.00 (M910A-WH)
Command Arms Flashlight Grip Adapter … (FBS-FGA) $69.99 This foregrip
combines a flashlight mount for 1" diam. lights, and vertical grip all in one –
as well as including an accessory rail section that serves as a laser mounting
point, and a battery or small parts storage compartment within the grip
(accessible by removing the screwcap on the base. A thumb activated push
button on the back of the grip operates the flashlight’s on/off switch and
allows for signaling. Removable side plates on the grip utilize a rubber surface to enable installation
of a pressure switch underneath the side plate. Fits all Picatinny Rails, clamps on with thumbnuts for
a “no tools” installation, and has Command Arms’ Lifetime Warranty.
Rail Mount Switch Kit for Streamlight / SureFire Flashlight Pressure
Switches… $12.95 (SCH-4366-KT) A 3 piece kit to mount Streamlight or
Surefire switches onto any Picatinny Rail without adhesives or velcro. The base snaps on the rail
and the insert encapsulates the switch pad - molded black Santoprene Thermoplastic.
Handguards & Accessories 54 Orders – 1 800 998 7928
BUSHMASTER GUNSMITHING…
Remember, Bushmaster offers Free Gunsmithing and Assembly on most Parts & Accessories
when those parts are purchased from us – another Bushmaster value making us – The Best... By a Long Shot!
See Pages 40/41 for a complete Bushmaster XM15 Disassembly Schematic Diagram / Parts Reference
Our company policy is to offer Gunsmithing Assembly at No Charge when parts are purchased from us (with the
exception of sight bases). We will also offer our professional gunsmithing services to any customers who care to
ship us their AR15 Type firearms or assemblies for repair or buildup - and we will work on brands other than
Bushmaster. Gunsmithing time is charged at $40.00 per hour, and we charge a flat $16.50 fee for return shipping of
your rifle, upper or parts. For an estimate on your gunsmithing needs, call 1-800-998-7928 during business hours,
or E-mail a complete description of your needs to: Techsupport@[Link]
BUSHMASTER STANDARD ARMORER’S TOOL KIT… $85.95 (Part #s A1 ARM KIT / A2 ARM KIT) A standard
selection of indispensable tools for all AR15 assembly, disassembly and maintenance procedures (choose from A1
or A2 version - tools included differ). Kit includes: Dual Slot Barrel Vise Jaw Blocks; Drift Punches; Barrel Wrench;
Receiver Push Pin Tool; Technical Service Manual; Sight Tool; Cleaning Kit; Spring Package w/Standard Buffer Spring;
and Assorted Pins and Caps.
DELUXE ARMORER’S TOOL KIT… $180.95 (Part #s A1 DARM KIT / A2 DARM KIT) A complete tool kit for all
necessary repairs and installations (choose from A1 or A2 version - tools differ). Kit includes: Dual Slot Barrel
Vise Jaw Blocks; Drift Punches; Armorers Barrel Wrench; 200 Page Technical Manual; Sight Tool; Cleaning Kit;
Tele-Stock Wrench; Go; No-Go and Field Headspace Gauges; Firing Pin Protrusion Gauge; Receiver Push Pin Tool;
Spring Package with Standard Buffer Spring; and Assorted Pins and Caps.
MASTER ARMORER’S TOOL KIT… $319.95 (Part #s A MARM KIT) Total AR assembly and disassembly tools
for the professional! Includes: Armorers Action Block Kit; Lower Receiver Vise Block; Heavy Duty Combination
Armorer’s Wrench; Barrel Vise Jaw Blocks; Drift Punch Set; Rifle Cleaning Kit; .223 Go/No-Go/Field Headspace
Gauges; Firing Pin Protrusion Gauge; A1 and A2 Sight Tools; Receiver Push Pin Tool; 200 page M16 A2 Marine Corp.
Technical Manual; M16 A1 Technical Manual; Armorer's Video; Tetra Gun Care Kit; 2 complete spring packages
(with carbine & rifle buffer springs), and an assortment of pins, detents and caps for fast and foolproof assemblies
and installations. A great value - cost of components purchased separately would exceed $325!
Receiver Push Pin Tool... (IMP-1) $7.50 Drift Punch Set… (STA PNCHSET) $22.95 A Set
1/ 3/ 1/
This handy tool is designed 5of Four excellent Starret Punches - 16"; 32"; 8";
/32" - all the necessary sizes for any work on the
to push out tough Takedown and Pivot
Pins in your lower receiver. Machined from black nylon AR15/M16 rifle, as well as many other mechanical
material so it won’t mar the gun’s finish, it also helps projects.
install the small Pivot Pin Detent and Spring, and will fit
into the buttstock storage compartment.
Barrel Vise Jaw Blocks… (AMER-001) $15.95
A dual slot design for the installation of barrels, front
sight removal rear sight work, cleaning, or any job that U. S. Gov’t. Tech Manuals…
requires immobilization of the rifle - just insert them Complete Maintenance, Repair
into your vise. These heavy aluminum and Troubleshooting Information
blocks are not limited for either the A1 or A2 model (A2
to AR15/M16 service shown here). Approx. 300 fully
work – they also illustrated pages – 8 1/2” x 11”.
make an excellent all For M16A2… $11.95
around gunsmithing tool, (TM9-1005-319-23P)
and they will not mar the For M16A1… $11.95
finish of the rifle or barrel. (TM9-1005-249-24P)
Headspace Gauges… High quality machined steel gauges for Bushmaster 5.56mm Caliber Rifles and Carbines -
including instructions for use. Also available, a headspace gauge set for all .308 Caliber Rifles… (Part #s below).
5.56mm NATO Caliber Go-Gauge… $25.00 .308 Cal. Go-Gauge…
(HGO223G) Used to determine adequate headspace. $25.00 (HGO243G)
Chamber depth enough or oversized bolt. .308 Cal. No-Go Gauge…
5.56mm NATO Caliber No-Go Gauge… $25.00 $25.00 (HGO243N)
(HGO223N) Used to determine excess headspace. .308 Cal. Field Gauge…
Chamber depth too great, or undersized bolt. $25.00 (HGO243F)
5.56mm NATO Caliber Field Gauge… $25.00 Also available - Headspace
(HGO223F) Used to determine overly excessive Gauges for .50 BMG Caliber.
headspace due to chamber and bolt wear. Call for pricing.
Gunsmithing Tools & Supplies 55 [Link]
BUSHMASTER GUNSMITHING… Bushmaster Operating & Safety Manual... $2.95
The Bushmaster DVD... (BFIMANA2OP) 64 Pages
(ADS-002) $25.95 Complete Field Stripping; Cleaning,
assembly and buildup details Maintenance on all
for the XM15/AR15/M16 rifle. Bushmaster XM15 and
This live, 60 minute, digitally Carbon 15 Models – with
photographed DVD will help Parts Diagrams, Safety
you understand the complete Tips and Sight Zeroing.
Bushmaster system in extensive AR15/M16 Gas Tube Wrench...
step by step detail. Our (MBC-01) $31.95
Armorer describes the tools This tool eases the
needed for every operation, shows the details of all installation or removal of
subassemblies, and demonstrates function checks – all the rifle’s gas tube. 51/4" long
in sharp, digital close-ups. A brief history of the rifle’s with black plastic handle.
development is included, along with an overview of the Also fits and works on
wide variety of customizing parts and accessories AR10 / SR25 rifles.
available. Safety rules, and armorer’s assembly tips from
our 40 years of knowledge and experience with the Bolt Carrier Carbon Scraper… (MBC-02) $31.95
AR15 rifle system will walk you safely through any A sturdy workbench tool for the AR15/M16 gunsmith.
maintenance or repair work. Makes quick work of cleaning out carbon buildup inside
Also available… The Bushmaster Video… the Bolt Carrier – a few quick twists of the wrist can
(ADS-001) $21.95 All the live video instruction and have your Bolt Carrier cleaned
rifle assembly information of the DVD above but in and back to perfect
standard VHS Videocassette format – 60 minutes. operating condition.
Field Bolt Carrier Carbon Scraper… (BC01) $20.95 This tool steel
scraper quickly removes carbon buildup in all AR15/M16 bolt carriers. Just slide
a section of cleaning rod into the hole in the end, insert in your carrier, and twist.
And, it is small enough to fit into the rifle’s buttstock storage compartment.
Firing Pin Protrusion Gauge... (MMT-0005) $15.95 Checks firing pins for minimum (.028") and maximum
(.036") protrusion. Excess pin protrusion can pierce the primer – causing the rifle to blow up. Insufficient protrusion
results in rifle’s failure to fire. Use this gauge to measure pin
protrusion on AR15/M16 rifles, or any center fire rifle.
AR-15 Combination Armorer’s Wrench for Newer TeleStocks… (1570-4) $23.50 A newer design
Armorer’s Wrench that fits the latest model telestocks with the cuts on the locking ring, this heavy duty tool
combines many necessary functions for the AR15/M16 armorer, and features rugged steel construction with a
“hammered” black/grey finish. Weight 1.125 lbs – 12.25” overall. A two sided wrench at one end fits either
multi-point or peg style barrel nuts on barrels up to 1” in diameter. A breaker
bar or torque wrench can fitted into the
1/2” square drive opening. Two other slots
fit A1 and A2 birdcage flash suppressors
and receiver extensions. Weight: 1.125 lbs. / Length: 12.25”

Heavy Duty Combination AR-15 Armorer’s Wrench… (1570) $22.50 This tool combines many of the
functions necessary for the AR15/M16 Armorer. A two sided wrench at one end fits either multi-point or peg style
barrel nuts on barrels up to 1” in diameter, and a breaker bar or torque wrench can fitted into the 1/2” square drive
opening. The wrench’s other end fits Telestock Locking Nuts, and a large flat screwdriver blade is also included for
use on standard buttstock screws. Two other slots
fit A1 and A2 birdcage flash hiders and
receiver extensions. Heavy steel construction
Weight: 1.25 lbs. / Length: 13” with a black/grey “hammered” paint finish.
Armorer’s Barrel Wrench… $11.95 TeleStock Wrench for new style (ribbed) TeleStocks...
(RM-001) For AR15/M16 barrel removal and $6.50 (223-telewrench2) An economical tool for the locking
installation – an original Gov’t. issue tool in oiled nuts on newer type telestocks (fixed and collapsible) – three
paper wrap with 1/2" square drive opening for a lugs accurately engage the indents on the lock nut, and an
torque wrench or breaker bar – also fittings for additional hole fits the end of the receiver extension tube for
flash suppressor and disassembly work. Stamped steel
receiver extension. construction with
Note: Will not fit our vinyl coated
DCM profile barrels. handle.
Gunsmithing Tools & Supplies 56 Orders – 1 800 998 7928
BUSHMASTER GUNSMITHING… Bushmaster Armorer’s Action Clamp for all
Lower Receiver Vise Block… (OM-006) $31.95 AR15/M16 type rifles… (OM-003) $41.50 Works
Clamp it in a vise, and it’s magazine shape locks into with all AR type rifles – even early A1’s and A3
the magazine well of any AR15/XM15/M16 lower “flat-top” Uppers with Carry Handle in place. Used in
receiver for assembly or maintenance work. Machined conjunction with an Armorer’s Barrel Wrench, this
from high density polyethylene. Use clamp eliminates barrel vise jaw blocks for removing or
to mount Lower Receiver replacing barrel assemblies, and is necessary when
in either upright or installing tubular aluminum V Match handguards or
inverted position. Will competition
not distort receiver or free-floating
harm it’s finish. tubes.
(Vise and Receiver (Upper receiver
shown are not is not included)
included)
Also available for
Also available, a larger
Bushmaster .308… (OM-004) $53.95
version for the Bushmaster .308… (OM-007) $39.95
Sight Adjustment Larger Prongs AR15 Multi-Tool… (BT-MCT) $12.95 Offering
fit only A1
Tools... Adjustment Rear Sights
A1 Type Front several “AR” related functions in a tool lighter than 2
Note 5
tools for A1 & A2 Front Prongs rounds of ammo, the Multi-Tool (1) adjusts front sights;
Sights, and A1 Rear (2) cleans bolt faces; includes (3) non-mar disassembly
Sight. Machined steel punches for take down and lower receiver pins; (4)
A2 Type Front
with black oxide finish – designed with 4 Prongs emergency Phillips screwdriver or scraper; and (5) a
to fit in the stow-grip or buttstock compartment. Lanyard loop to tie it to your web gear or tool bag. The
high carbon stainless steel insert is
For A1 Rifles (Round Sight Post)… (RAY-006) $8.50
heat treated to Rockwell
For A2 Rifles (Square Sight Post)… (RAY-005) $8.50
48-50 for long life.
Gunslick® Ultra Gun Care Cleaning Kits… 4 3/4" Overall Length

Gunslick® .22 / .223 Cal. Cleaning Kit… $15.95 (62008-223)

or Gunslick® .308 Cal. Cleaning Kit… $15.95 (62014-308)
These quality kits are offered in either .22 Caliber or .30 - .32 Caliber
versions. The .22 Caliber kit is a great value for all Bushmaster .223
Rem / 5.56mm rifles or pistols, and the .30 - .32 Caliber model will keep
your Bushmaster .308 - or any other .30 Cal. rifle clean and ready for
the range. Gunslick® Kits contain: 2.25 oz. of Ultra-Lube
Advanced Gun Oil; 2 oz. of Ultra-Klenz Advanced Gun Cleaner; a
quality, 3-piece Cleaning Rod of blackened steel with overmolded
“soft grip” T-Handle; Phosphor Bronze Brush; Wool Mop; Cotton
Patches; Cleaning Tip and Jag; and a Muzzle Guard - All packaged in a sturdy
blue plastic, storage box - everything you need for complete firearms care.
Dewey Coated Rods… Top quality one-piece rods featuring an unbreakable ball bearing
handle, and a nylon coating to protect rifling and preserve accuracy. 8-32 female threaded to accept standard
brushes or other manufacturer’s accessories. Includes a Universal Brass Patch Loop.

For Barrels to 20": Dewey 22CF-24" (DEWEY-100) $27.95

For Barrels to 24": Dewey 22CF-30" (DEWEY-200) $27.95
For Barrels longer than 24"*: Dewey 22CM-36" (DEWEY-22CM-36) $28.95
*The 22CM-36 is 8-32 male threaded with an adapter. Use with a Breech Rod Guide in barrels 24" or longer.
Dewey .308 Cleaning Rod… (DEWEY-30C-36) $28.95 A 36” long, one piece, .30 Cal. nylon coated rod with
Jag and Brush Adapter (12/28 male thread). Thick nylon coating protects the bore from scratches, and ball bearing
handle allows the rod to spin as it tracks the rifling. For any .30 caliber barrels.
New! Dewey .50 Caliber Two-Piece Cleaning Rod… (DEWEY-50C54) $42.95 A 54” long, two piece rod
perfect for the new Bushmaster BA50 .50 BMG Cal. Rifle. 44" of coated rod with 5/16 stainless steel extension.
Cleans everything from .35 Caliber and up. Supplied with 50-J Brass Jag and adapter to accept 8/32 brushes
Dewey AR15/M16 Breech Rod Guide... (DEWEY-1000) $23.95 Guides cleaning rod straight into the barrel
from breech end, O-Rings seal off the chamber to prevent any back-flow of cleaning solvents and debris into the
action, trigger and magazine areas. For barrels 24" and longer, we recommend using a 36" rod
with this rod guide (see Dewey Rod Dewey-22CM-36 above).
Also available - Dewey .308 Breech Rod Guide… (Dewey-AR-10) $25.95
Gunsmithing Tools & Supplies 57 [Link]
BUSHMASTER GUNSMITHING… Models for: AR15/M16 Postban… (.700" diam. at muzzle)
Dewey Delrin Cleaning Rod Guides… Maintain $9.95 (DEWEY-1100)
the original accuracy of your rifle by protecting AR15/M16 PreBan… $7.95 (DEWEY-300)
the all important muzzle of the barrel - use
M1 Garand… $7.95 (DEWEY-400)
these guides with all types of cleaning rods.
Dewey Delrin Guides direct your cleaning M14 & M1A… $7.95 (DEWEY-500)
rod straight into the barrel and prevent it Mini 14… $7.95 (DEWEY-600)
from contacting the muzzle - some models Mini 30… $7.95 (DEWEY-700) Also fits Bullpup
have brass inserts to guard against rod wear. Ruger 10-22… $7.95 (DEWEY-800)
Otis .50 Caliber Rifle/Pistol Cleaning System… (250) $51.66 The Otis .50 Cal.
This comprehensive Cleaning System is specifically designed for all Cleaning System
your .50 caliber rifles and pistols, and fits in a handy Cordura zippered (250) $51.66
pouch. It includes two .50 caliber Memory-Flex Cleaning Rods: an 8”
length for .50 caliber pistols, and a 40” for .50 caliber rifles, along with
a large heavy weight brass obstruction remover and a
slotted tip. Also included in the .50 Cal. Rifle/Pistol
Cleaning System: a brass scraper, female rod handle, a
receiver brush, and a .50 caliber end brush (for precision
cleaning in hard to reach areas), 3” panoply patches, a
.50 caliber chamber brush and bore brush, a bore
reflector/flag safety, and all-in-one Otis O85 Ultra Bore
Solvent. The .50 caliber gear thread size is 10/32.
Weight: 0.735 lbs. / Dimensions: 4” x 4” x 2.5”. Otis Technology Gun Cleaning
CD… $5.95 (2001) All the tips,
techniques and information needed to
keep any rifle, pistol, shotgun or
blackpowder piece in perfectly
functioning, spotless condition -
compiled in a handy MiniDisc CD
format. A full color printed brochure
Otis with highlights from the CD is included
Tactical - both are packaged in a ziplock bag -
Cleaning “The Industry Guide to the Proper Care
System… and Cleaning of Firearms”
(750) Otis Buttstock Stowage Cleaning Kit... $46.95
$47.95 (224-2)
This premier 23 part A 16 pc.
weapons maintenance system cleans all rifles .177 to cleaning
50 caliber, shotguns .410 to 10 gauge, and pistols .177 kit for the
to 45 caliber. It is packed into a zippered, round, black AR15/M16
nylon soft-pak (4” by 2”). Includes 5 brass bore packed in
brushes; 3 forged brass tips; 3 memory-flex rods; a wedge
t-handle; shotgun adapter; all caliber patches and patch shaped
savers; 1/2 oz. bottle of bore solvent; NATO adaptor for Cordura
military brushes and bore reflector/safety flag. Cleaning pouch
manual is included as well. Weight - approx. 9.3 oz. shaped to
fit inside the
Dewey Cleaning Rod Adaptor... $3.25 rifle’s buttstock
(DEWEY-22-M-ADPT) A machined brass adaptor storage compartment - lifetime
threaded (female 8-36 / male 8-32) to accept the guaranteed by Otis Technology. Includes Bore and
military type cleaning brushes - allowing them to be Chamber Brushes, Memory-Flex Rod, Double End Brush,
used with Dewey and other Slotted Patch Tip, Patches, NATO Adapter, Bore Light,
commercial cleaning rods. Chamber Rod, T-Handle, CLP Solvent, and more.
Safety Block for AR-15/M16 Rifles and others… AR15/M16 Lower Receiver Safety
(SBBFI) $2.50 Molded plastic with the Block... (SB16) $7.50 This bright yellow
Bushmaster name. Cone end safety block locks into the magazine well
inserts into the firing chamber, when the bolt is retracted and indicates
handle protrudes to indicate a a safe weapon. We use them regularly
safe firearm condition. here at the Bushmaster factory!
Gunsmithing Tools & Supplies 58 Orders – 1 800 998 7928
BUSHMASTER GUNSMITHING…
Hoppe’s BoreSnake… World’s Fastest Gun Bore Cleaner®…
(24011) $17.90 This cleaning system for all .22 Caliber Centerfire and
Rimfire rifles will get your gun bore shiny in seconds! A “First Floss
Area” removes foreign particles prior to the scrubbing action of
the Bore Brush which is embedded in the cord to loosen
hard deposits. Then, a “Main Floss Area”, with 160
times more surface area than a patch, cleans like no
other product. A Brass Weight (with caliber
stamping) slips easily through barrel – then just
grasp the BoreSnake and pull it through the bore.
• Light and Compact
5.56mm /.223 Rem. Caliber Bore & Chamber • No assembly required
Brushes… High quality tools for barrel cleaning… • Built-in bronze brushes
• Chamber Brush… (BR-001) $2.00 • Washable and Re-usable
NEW! .50 BMG Cal. Cleaning Gear… to help the
Military 8-36 Threading
new Bushmaster BA50 Rifle deliver its utmost accuracy.
• Bore Brush… (A190) $1.65 • Bore Brush… (B-50) $1.95
• Chamber Brush… (SB-12) $1.95
KleenBore Bore Brushes… Top quality materials – • Chamber Rod… (DEWEY-CHR-50) $19.95 Accepts
all threaded 8-32 for commercially available rods. Chamber Brush above – heavy brass construction
• 6.8mm /.270 Caliber Bore Brush… (A-179) $1.65 • Chamber Brush Adapter… (DEWEY-SBA) $2.95
Attaches Ch. Brush above to Dewey Rod on Page 57
• 7.62mm /.30 Caliber Bore Brush… (A-180) $1.65
Gov’t. Issue M16 Cleaning Kit… (A CLEAN)
• 9mm /.38 Caliber Bore Brush… (A-181) $1.65 $10.50 This complete kit includes a T-Handle; a four
• .44 /.45 Caliber Bore Brush… (A-182) $1.65 piece rod; swab holder; bore and chamber brushes. Will
Cleaning Kit Case... New Gov’t. Issue nylon cases fit in the standard buttstock compartment of the AR15,
with snaps and velcro closures. Great for holding all XM15 or M16 rifle. All threading is the military 8-36.
sorts of small parts and gear. Available in two colors…
Olive Drab (PO3030D) or
Black (PO303B)
$8.95 each

Bushmaster Cleaning Kit COMBO... The 7 Piece

Gov’t. Issue Cleaning Kit shown above packed in the
nylon Cleaning Case Kit at left. Specify your choice of
Black or Olive Drab Case.
Cleaning Kit in Black Case… (cleankitB) $16.95
Cleaning Kit in Olive Drab Case… (cleankitOD) $16.95
The Bushmaster Gun Pad… (QP-014) $9.95 It’s a
AR15/M16 Handguard Tool… (HGD-Tool) $21.95
This handy tool provides the leverage needed to sturdy counter-top protector for gunsmithing assembly
compress the weld spring inside work and it doubles as a computer mouse pad (may not
the delta ring, and eliminates the work well with an optical mouse due to red printed
need for a second pair of areas). This big (18" x 12") brightly colored pad has
hands to help remove crisp images of Bushmaster rifles, a protective laminate
AR15/M16 two-piece surface, and soft, non-skid, foam padded backing.
handguards. We use this tool
frequently at the Bushmaster
plant. Its manufactured from
strong, powder coated, 1/4"
round steel stock with
protective vinyl coatings in all
critical contact areas - won’t
scratch the receiver. Works well
on both straight and tapered
delta rings.

Gunsmithing Tools & Supplies 59 [Link]

BUSHMASTER GUNSMITHING… BIRCHWOOD CASEY QUALITY GUN REFINISHING PRODUCTS…
Birchwood Casey Super Black Touch-Up Pens… $6.95 ea. Touch-up nicks and
scratches on black anodized aluminum, and polished or matte finished alloy gun
receivers, trigger guards, scopes or black painted surfaces – a fast drying, lead-free paint
with superior adhesion and durability for gunsmithing uses. The felt tip chisel point touch-up pen holds 1/3 fl. oz.
For Gloss Black Finish… $6.95 (Gloss - 15101) / or For Flat Black Finish… $6.95 (15102)
Birchwood Casey Aluminum Black Metal Finish... (15125) $8.50 A room temperature chemical used by
gunsmiths and the metal industry to blacken aluminum parts and to restore scratched or marred areas quickly. It’s
easy to apply, fast acting, and makes no dimensional changes to the part. Final color will vary from deep gray to
black depending on the alloy of the aluminum part it is applied to. 3 fl. oz.
The Tetra Gun Cleaning Pack… (5337100802) $23.50
A superior firearms maintenance and preservation system based on a
revolutionary breakthrough in synthetic polymer technology that will fight
corrosion - reduce friction - reduce wear - improve performance - and make
gun cleaning easier. Tetra’s Gun Cleaning Pack Contains…
• 1 oz. Tetra Gun Lubricant: A synthetic, polymer based lubricant and
conditioner for action and all moving parts.
• 1 oz. Tetra Gun Grease: Synthetic polymer based white grease for use
on all metal to metal contact surfaces.
• 3.75 oz. Tetra Gun Spray: Synthetic polymer based cleaner and light
lubricant - removes dirt, combustion residue, old lubricants and solvents, and
offers corrosion protection.
• 4 oz. Tetra Copper Solvent: Concentrated copper, lead, powder, and
plastic remover. Removes stubborn fouling from barrels and provides fast, effective cleaning without "barrel etching".
Tetra Field Kit… (TETRAFIELDKIT) $7.95 All the necessities to keep your gun functioning on the range or in the
field. Includes: 1 oz. tube Tetra Gun Grease and 1 oz. plastic bottle Tetra Gun Oil.
Tetra Gunsmith's Kit… (TETRAKIT) $31.95 Professional size quantities of high quality Tetra products: 2 - 1 oz.
tubes of Tetra Gun Grease / 8 oz. Tetra Gun Oil / 8 oz. Tetra Gun Spray.
Tetra Gun Blue & Rust Remover… (5337100001) $5.50 Removes old bluing
and rust quickly and effectively without damage to base metal – a necessity before
re-blueing or browning. 3 fl. oz.
Tetra Gun Liquid Gun Blue… (5337100002) $5.50 A great product for touch-up
or complete re-blueing of firearms. This fast-acting cold liquid yields a non-streaky,
uniform blue-black finish to steel (won't work on stainless steel, aluminum or
nonferrous metals). 2.7 [Link].
Tetra Gun Copper Solvent… (5337100501) $8.50 Firepower FP-10 “CLP” Type Lubricant… A Cleaner,
Removes stubborn fouling without Lubricant, and Preservative for Weapons & Weapons
“barrel etching”. All-in-one copper, lead, Systems, Firepower FP-10 is a semi-synthetic CLP
powder and plastic remover in specifically formulated for the serious Shooter, Soldier, Law
concentrated liquid form. 4 fl. oz. bottle. Enforcement Officer, Sportsman and
Professional Armorer. It’s extraordinary
Cleaning Patches… (923) $5.50 abilities to clean, remove lead, lubricate, 16 oz.
Bag of 100… Sized for the AR15/M16 guard against extreme pressure and
rifle bore, 100 soft white cotton flannel wear, and protect from corrosion
cleaning patches – an absolute necessity – all in one product – make it
for all firearms maintenance! the ultimate for the total care of
Individual Tetra Products... all firearms, and other sporting
Tetra Gun Grease… goods.
1 oz.
1 oz. Tube (5337100005) $5.50 1 oz. Bottle…
Tetra Gun Oil… (FP-10-1) $4.25
1 oz. (5337100006) $4.50
4 oz. (5337100303) $7.95 4 oz. Bottle…
8 oz. (5337100304) $12.95 (FP-10-4) $6.50
Tetra Gun Spray Cleaner…
16 oz. Bottle…
3.75 oz. (5337100201) $7.50 (FP-10-16) $14.95
8 oz. (5337100202) $11.95
Gunsmithing Tools & Supplies 60 Orders – 1 800 998 7928
PARTS FOR BUSHMASTER COMPETITION RIFLES… (can be fitted to standard models as well)
A3 Removable Carry Handle configurations, A2 Type DCM
and Flash Suppressors also available - call. Competition
Upper Rec. Assy.

Bushmaster DCM Competition Upper Receiver/Barrel Assembly… (PURA2B 20CG8) $765.00 For the
serious High Power Competitor – this Upper Assembly includes all the competition modifications needed to win!
This highly accurate 5.56mm/.223 Rem. Competition Upper Receiver/Barrel Assembly features a redesigned
“Stay-Straight” Dual Detent Rear Sight with Competition Hood. As the Bolt in this assembly is matched to the
Barrel Extension to deliver the utmost accuracy, this assembly includes the matching Bolt and Bolt Carrier.
Bushmaster DCM Competition Heavy Barrel with Factory Matched Bolt and Front Sight
Base… $313.95
(9349054-20CGA)
A lapped 20" Barrel – button rifled in 1 x 8 Right Hand Twist – features an 11° crowned
muzzle designed for competition, and a custom match hybrid chambering with longer throat, or "Leade" to
accommodate 5.56mm ammunition. This avoids the higher pressures developed when shooting 5.56mm ammo in a
.223 caliber chamber that has a shorter "Leade" (both calibers can be safely used). Finest Chrome Moly Vanadium
Steel (non chrome-lined) with a Manganese Phosphate finish. Diameter from the barrel extension forward to the
sight base step is a full 1". NOTE: Requires assembly by an experienced Gunsmith to achieve optimal accuracy.
DCM Competition Lower Receiver Assemblies… All Include
our factory set DCM Two-Stage Competition Trigger.
• Complete DCM Competition Lower
Assembly… Lower Receiver with A2 Buttstock,
Competition Buttstock Weight, Pistol Grip and Two Stage Trigger
as shown. (A LOW STD W/CGWT) M.S.R.P. … $430.00
• DCM Lower Assembly… Same assembly as above less Buttstock
Weight. (A LOW STD W/CG) M.S.R.P. … $410.00
• DCM Lower Receiver Assembly minus Buttstock… Includes Pistol Lower Receivers
Grip, DCM Two Stage Trigger and all internal parts - as shown at right. available only
through FFL dealers.
(ALOW W/OSTK W/CG) M.S.R.P. … $360.00
DCM Competition A2 Upper Receiver Assembly with “Stay Straight” A2 Competition Rear Sight...
Includes Forward Assist, Ejection Port Cover and One Competition Sight Micro-Aperture in
your choice of four “peep” sizes - please specify size (see descriptions on next page).
• DCM Upper Receiver Assy. w. 1/2 Minute Rear Sight… (A2URCG2XR) $223.95
• DCM Upper Receiver Assy. w. 1/4 Minute Rear Sight… (A2URCG4XR) $223.95
Bushmaster Competition “Stay Straight” A2 Rear Sight Assembly... Highly accurate Rear Sight Assemblies
with the new “Stay-Straight” dual detent mechanism (keeps the sight from moving or canting) for the serious
competition shooter. Elevation and windage mechanisms are available in either 1/2 or 1/4 Minute
of Adjustment. The flip-up is machined to allow installation of different interchangeable
Micro-Apertures (one aperture included with each complete sight or flip-up assembly). These
precision machined inserts are available in 4 aperture sizes: .036" / .040" Standard (9 out of 10
shooters find the .040" standard aperture works best, your eyes may differ) / .046" or .052"
• 1/2 M.o.A. Rear Sight with choice of aperture size… (9349072CGA2XR) $122.50
• 1/4 M.o.A. Rear Sight with choice of aperture size… (9349072CGA4XR) $122.50
Bushmaster DCM 1/4 Minute Windage Competition Rear Sight Conversion Kit… $21.50
(AR 1/4MIN CONVK) Convert your old A2 sight to 1/4 Minute of Windage Adjustment configuration with these high
quality competition parts. Kit includes 1/4 M.o.A. Drum, Pin, Detent Springs and Balls.
Bushmaster Two Stage Competition Trigger… (8448592-SCGK) $127.95
This finely honed competition trigger includes all the specially modified parts shown
plus instructions - ready for installation in your lower receiver. This trigger can be set
for a 3 1/2 lb. DCM legal 1st Stage and a 1 lb. (2nd Stage) letoff. NOTE: This Trigger
will not fit in Colt Lowers with a “Block” over the Safety, and is not designed
to work with large Colt pivot pins.
Also Available… Two Stage Competition Trigger with Bushmaster
Ambidextrous Safety… (8448592-SCGKA) $148.95
Bushmaster Competition Parts 61 [Link]
PARTS FOR BUSHMASTER COMPETITION RIFLES… Extra Competition Sight Apertures*
“The Hood”… (9349075CGH) $15.95 A Competition Rear $10.95 ea. Choose from: .036" (CGI36) /
Sight Shroud, (shown center in photo) this tubular, threaded insert for .040" Std. (CGI40) / .046" (CGI46) / .052"
our competition flip-up eliminates all glare and improves your sight (CGI52). These thread directly into the flip-up
picture. Internally threaded to accept the in your Competition Sight. Your
micro-aperture of your choice. vision determines which
“The HOOD KIT”… $40.50 Includes our Micro-Aperture suits you best
Competition Flip-up; the Hood Sight Shroud and (most shooters prefer the .040"
your choice of one Competition Aperture (sizes at standard aperture).
right). Part numbers below indicate the size of the aperture *Any Three Apertures can be
opening. Choose from: .036" (CGF36HK) / .040" (CGF40HK) purchased as a set… $25.95
.046" (CGF46HK) / .052" (CGF52HK) Select from sizes listed above.
Shorter Competition Hood… This variation on the Competition Rear Short Competition
Sight Shroud above was created to allow shooters who wear glasses to get Hood… $15.95
as close as possible to the rear sight without scratching their glasses. (9349075CGH-S)
A2 Competition Front Sight Post… $13.95 A2 Competition “Flip” Sight… $26.50
A quality sight post surface ground on three sides Shipped with One Micro-Aperture.
for optimum visual clarity - replaces your existing Choose from these 4 Aperture sizes:
sight post. Available in 2 widths - Specify: .052" .036" (CGF36) / .040" (CGF40)
(9349056CG52) / .062" (9349056CG62) .046" (CGF46) / .052" (CGF52)
Bushmaster DCM “Free-Floater” Kit – a Barrel Nut / Free-Floater Tube / Handguard Combination…
(9349059CGA) $159.95 This forend system meets all regulations for DCM Competition, and free floats the barrel
from Barrel Nut forward for optimum accuracy.
A Sling Swivel Loop is mounted onto the
front of the tube – Handguards, Delta Ring,
Weld Spring, Snap Ring and a Special Gas
Tube are included.

As installed on DCM Rifle

DCM Free-Floater Tube / Custom Gas Tube Set… (2698823) $132.95 Add your own rifle length handguards
to this Competition free-float tube – includes a
custom bent gas tube. Minor modifications to
handguards are required for fitting, Upper
Receiver disassembly and Front Sight removal
are necessary for assembly onto rifle.
Competition Handguard Balance Weight…
(GPSS-HBW) $31.95 This lead balancing weight fits A2 Buttstock
inside the bottom half of the standard A2 handguard to Balance Weight... $21.50
add forend weight to your competition rifle (a (Part # 9349119SW) Fits snugly in the
companion to the buttstock weight at right). Weighs standard A2 buttstock compartment without
approx. 3.5 lbs.,and can be cut down to achieve perfect rattle - a 3.62 lb. chunk of lead that can be trimmed to
balance. Handguard half is shown for reference help achieve a perfectly balanced rifle. Its wedge shape
only and is not and rubber pressure pad ensure a tight, rattle-free fit.
included.
AR15 Bolt Release Extention… (SSP-1) $47.95 A
finely machined aluminum lever to help High Power
Competitors get back on target
faster by keeping the forearm
Bushmaster Competition Sight Service Tool… hand in place. After inserting a
(CG-MPT) $10.95 A combination Front Sight fresh mag, simply push the lever
Adjustment Tool and Rear Shroud Insert with the trigger finger to snap the
“Screwdriver” machined of bolt forward - no more reaching
steel with black finish, over the rifle. It slips over the bolt
and knurled for a catch release, and locks in place
non-slip grip. with supplied set screw and Allen
Length - 2” wrench.
Bushmaster Competition Parts 62 Orders – 1 800 998 7928
PARTS FOR BUSHMASTER COMPETITION RIFLES…
AR15/M16 Lower Receiver Lower Receiver Safety Block with
Safety Block... (SB16) $7.50 This Flag... (SB16F) $8.50 Similar to the
bright yellow safety block locks into safety block above, this improved
the magazine well when the bolt is model adds a safety flag that shows
retracted and indicates a safe out of the open ejection port – a
weapon. We use them regularly competition and range safety must!
here at the Bushmaster factory!
Single-Shot Magazine
Chamber Checker Follower… $13.95
Safety Flag… (SS-FOL) A blue
$2.50 plastic follower that installs easily
(CC Chamber Check) inside most “AR” type .223/5.56mm
This tough yellow plastic magazines - allows single shot
flag slips into the chamber. loading of extra long competition
Close the bolt, and it clearly handloads that won't function in
shows your rifle’s range-safe status regular magazines. Shown separately
(shown separately, and installed above). and installed. Magazine not included.
Safety Block for AR15/M16 Rifles and Moly-Slide™ Lubricating Paste… $8.50
others… (SBBFI) $2.50 A plastic Safety (MS-100) Works great on competition triggers! A
Block with Bushmaster name molded in – the 60% Molybdenum Disulfide (MoS2) lubricating
cone end is inserted into firing chamber, and paste for wear resistance, anti-seizing and
the “handle” end protrudes to show safe anti-galling on cams, bushings, and other sliding
condition of rifle. surfaces – has a very wide working temperature
Bushmaster includes range with minimal evaporative loss. The 1 oz. jar
this Safety Block with will usually last the average shooter/gunsmith for
every complete rifle sold. years. A little Moly-Slide™ goes a long way!
Sinclair International Sight and Muzzle Cover Set… (14-200)
$14.95 Often seen on the DCM ready line, these popular protective covers
are molded from durable bright yellow vinyl to protect “sight zero”; to keep
dirt out of the muzzle, and to offer high visibility. The set includes Front and
Rear Sight Covers and two sizes of Muzzle
Guard Covers – one for rifles with flash
suppressors and another for rifles with plain
4 Piece Set
competition crowned muzzles.
UVEX Sharp-Shooter Safety Eyewear - Includes Free Earplugs… These tough, sporty, and lightweight Uvex
Shooting Glasses protect both your eyes and your ears! - they come with free earplugs. Polycarbonate uni-lens
blocks 99.9% of harmful ultraviolet radiation from the sun, and is
“Ultradura” hardcoated to guard against abrasion and scratching.
They're tough enough to meet ANSI Z87.1-1989 and OSHA
guidelines, and their wrap-around design provides excellent
peripheral vision. Black poly-carbonate frames feature
adjustments for temple length and tilt for a custom fit. Each
pair of Uvex glasses includes Shooters Earplugs warranted
to reduce noise by 30
decibels (ANSI test
S3.19-1974). Three different
lens colors available: clear;
amber, and espresso. Great eye and
ear protection at a great price! Espresso Lens… $12.95 (R-03513)
UVEX Sharp-Shooter Safety Eyewear Amber Lens… $12.95 (R-03512)
with Free Earplugs included… Clear Lens… $12.95 (R-03511)
Peltor President Hearing Protector… $24.95 (AOS97069) Peltor’s President
model features exclusive liquid foam ear cushions that are designed for all-day
comfort and the padded stainless steel wire headband and generously sized earcups
automatically self-align for perfect fit and protection. The President offers a noise
reduction rating of 24 decibels, and its earcups can be adjusted in height from the
headband. The headband will fold down around the earcups for compact storage.
Bushmaster Competition Parts 63 [Link]
PARTS FOR BUSHMASTER COMPETITION RIFLES…
Turner Saddlery Leather Competition Sling… (TS-NMPTRS) $49.95
This National Match Police Tactical Rifle Sling is premium quality, black,
11 oz. strap leather – 54" in length with numbered holes. Fitted
with Mil Spec Parkerized steel hardware and copper rivets, and
the short strap is stitched with bonded nylon thread to resist
rot. Keepers are 7/8" wide and hand stitched. More and
more U.S. Military and civilian shooters are competing
with the M16 and AR-15 "Black Rifles" in the high
power matches, and this is the sling they choose!
NEW!… HIGH POWER COMPETITION ACCESSORIES FROM CREEDMOOR…
Creedmoor Rifle Data Score Book… (BFI-N075) $8.95
Essential data is arranged in a simple check off format – with
enlarged target overlays (double overlays for 200 and 300 yard
rapid fire stages). Ample pages for 200/300/600 and 1000 yard
shooting – in a convenient 8.5” X 5.5” spiral bound format.
Creedmoor Deluxe Service Rifle Shooting Stool… (BFI-N051)
$69.95 Custom sewn by Creedmoor for Bushmaster of Red Cordura
with Black webbing and the Bushmaster Snake Logo. Carry all your
“necessaries” in the handy hanging compartmentalized bag –
accessible through half moon YKK zippered openings on both sides.
Carry up to four AR-15 Magazines in the outside pouches - protected
from dirt and rain with a Velcro flap. A zippered pocket above the
magazine pouch accommodates your score book, and large outside
pockets on three other sides offer huge storage capacity. The 1”
diameter aluminum tubular frame is strong, yet light in weight, and
folds flat for carrying convenience (carry handles are sewn into the
bag’s top edges. Heavy duty black rubber “crutchtips” keep you from
sinking into soft dirt. Carrying Bag dimensions are 12.5” tall X 11”
wide X 12.5” deep, and overall weight is only 6 lbs.
Shooting Stool Shoulder Strap… (BFI-N026) $5.95 A
convenient, 1.5” wide black polypropylene webbing shoulder
carrying strap for the Creedmoor Shooting Stool. Weight – 1 lb.

Creedmoor Deluxe Cart Conversion Kit… $124.95

(BFI-Cartcon) A quality kit that attaches to
the Creedmoor Deluxe Shooting Stool
above to add easy rolling portability and a
compact size when folded down.
Machined from 3/8” bar stock aluminum,
and the finest heavy duty hardware and
wheels, this conversion will fold down in
seconds for car trunk stowage, or
disassembles easily to fit in a standard
suitcase as the longest piece is only 23”.
All Conversion Kit parts are shown
before assembly at right. At left, the
kit is shown completely assembled
onto the stool (not included -
purchase separately). The inset
photo shows the kit and stool
folded down for easy carrying.
Creedmoor Shooting Equipment Rain Cover… (BFI-N045) $29.95
This cover was designed so the competitor can saddle his rifle and gear on
the Shooting Stool above for protection against the nastiest weather, or
potential tampering. Generously cut of black nylon pack cloth, it can be
secured with its own strap around and under a shooting stool. Wt. 2 lbs.
Bushmaster Competition Parts 64 Orders – 1 800 998 7928
NEW!… HIGH POWER COMPETITION ACCESSORIES FROM CREEDMOOR…
Creedmoor Bushmaster Roll-Up Shooting Mat… (BFI-N040)
$79.95 A popular – and necessary – part of High Power Competition
gear, is this Roll-Up Shooting Mat done in Bushmaster colors by
Creedmoor Sports. It features a waterproof vinyl bottom in Bushmaster
Black, and Cordura nylon top in Bushmaster Red with our snake logo
embroidered on for maximum visibility. Oversize textured rubber elbow
pads offer secure and comfortable support for the prone position, and
ample foam padding throughout the entire mat provides shooter
comfort for all positions of the course. The mat rolls up for convenient
storage and carry, and is secured by nylon webbing and side buckles
with a carry handle. Dimensions are 29.5” wide X 68” long, and
weight is approx. 8 lbs. Mat is shown here both rolled
up, and spread out flat.
Creedmoor
Bushmaster
Shooting Coats…
Custom tailored
to your specific
measurements. The Bushmaster Logo
will be embroidered
on the jacket’s
back.

Creedmoor Bushmaster Hard Back Heavy

Cordura Shooting Coat… (BFI-N002) $310.95
For Extra Large Sizes (50 - 52 - 54) Add $20.00
This is Creedmoor Sports’ most popular shooting
jacket – sewn in Bushmaster’s Red & Black colors of
heavy Cordura material – ideal for High Power or
Smallbore Competition Shooting! A stiff interior
center back panel of heavy cotton canvas give
it the “hard-back” name, and provide
maximum back support for the standing
position. This heavy coat (weight 10 lbs.)
is custom sewn to fit the individual
shooter (male or female), and is available
in sizes 34 thru 48 – for the right or left
handed competitor.
To achieve an exact fit, Bushmaster
Sales people will refer you to Creedmoor’s
expert tailoring staff who will guide you
through the fitting process. You can choose
from standard or tapered cut, and you’ll have to provide exact
measurements around your chest (under armpits) and around
stomach (widest point). Specific alterations to achieve perfect
sleeve and body length should be discussed with Creedmoor.
BUSHMASTER SIGHTS, SCOPES & MOUNTS…
BUSHMASTER A1 SIGHT PARTS…
…for those who prefer the A1 Rear Sight Assembly… (A1 RSITE ASSY) $12.95 The original
simplicity of the original M16A1 configuration – adjustable with A1 sight tool or bullet tip.
A1 design. A1 Sight Aperture… (8448539) $6.50
A1 Windage Screw… (8448534) $3.15
A1 Round Front A1 Windage Drum… (8448535) $3.15
Sight Post… Rear Sight Flat Blade Spring… (8448536) $ .55
(8448572) $3.95 A1 Windage Drum Detente (8448537) $ .55
Original M16A1 A1 Windage Drum Roll Pin… (MS16562-96) $ .55
round post. A1 Drum Detente Spring… (8448538) $ .55
Sights, Scopes & Mounts 65 [Link]
BUSHMASTER SIGHTS, SCOPES & MOUNTS…
See Pgs. 40/41 for a complete Bushmaster Carbine Schematic Parts Diagram.
Sights and Sight Parts for DCM High Power Competition can be found in
the Competition Parts & Accessories Section of this Catalog.
Adjustment Knob for A1 Rear Sight… (LMT-001K) $9.95 This knob converts
the A1 rear sight to the latest M16A1E1 configuration. The phosphate finished steel
knob is knurled for quick adjustment (no sight tool needed) and more precise
half-click calibration. Knob only - use existing roll pin for changeover.
Complete A1 Rear Sight Assembly with our A1 Adjustment Knob…
(A1-RSIGHT-KIT) $14.95 Includes Knob, A1 Sight Aperture, A1 Windage
Screw, Flat Spring, Ball, Spring and Roll Pin.
A2 Square Front Sight Post… (9349056) $5.50 Front Sight Replacement / Repair Parts…
The standard M16A2 steel square post design. Front Sight Detent… (8448573) $1.50
See our Competition Parts Section for Sight Posts in Front Sight Detent Spring… (8448574) $ .85
two competition widths to suit your eyesight. Front Sight Taper Pin… (9349054BTP) $1.00
A2 Front Sight Post for Flat-Top Colts Complete Rear Sight Assembly for
(9349056-M) $5.50 Colt A3 Removable Carry AR-15/M-16 Type Rifles… $53.50
Handle Sights are taller than A1& A2 Rear Sights, (AR A2 RSA) Latest M16A2 design
and require an .040” taller Front Sight Post. Also with Dual Apertures and knob
for use with Swan Sleeves & ARMS #40 sight. adjustment for elevation and
windage. Dial in targets out to 800
KNS Precision Front Sights… Quality replacement Meters – in 100 Meter increments.
front sights for the AR15/M16 offering .010 diam. Manganese Phosphate finished steel.
crosshair wires for a precise sight picture and hooding
Also available, a complete 1/2 M.o.A.
for reduced glare. The Tactical Model Dual Range sight
Rear Sight Assembly for the A3 Removable Carry
(right) offers an adjustable elevation dot for close range
Handle… (AR A3 RSA) $53.50
targets below the long range crosshairs. Includes Allen
wrench for adjustments, and spare vertical crosshair. A2 Rear Sight Replacement/Repair Parts…
A. Standard Model… A B C Rear Sight Elevation Index................ (9349066) $7.50
(KNS1) $37.95 Rear Sight Elevation Index Screw....... (9349065) $1.00
B. Wide Hood Model… Rear Sight Elevation Knob.................. (9349067) $6.50
(KNS2) $37.95
Rear Sight Elevation Spring................ (9349070) $2.25
C. Tactical Model…
(KNS3) $52.95 Rear Sight Elev. Spring Pin........... (MS16562-121) $ .55
Rear Sight Helical Spring...... (9349069) $ .55 [3 req’d]
Williams Fire Sight for AR15/M16… $42.50 Rear Sight Ball Bearing. (MS19060-4808) $ .55 [3 req’d]
(9349054FSB-WFS) This front sight design incorporates Rear Sight Windage Knob................... (9349077) $6.50
a light gathering element (the tubular piece that Rear Sight Windage Screw.................. (9349076) $4.50
mounts along front edge of the AR sight base) for low
Rear Sight Windage Knob Pin........ (MS16562-98) $ .55
light situations. The assembly is elevation adjustable,
and all sight pieces are Rear Sight Flat Blade Spring................ (8448536) $ .55
CNC machined of Rear Sight Flip-up Aperture................ (9349075) $8.50
black finished Rear Sight Base................................. (9349074) $23.50
aluminum. No Trijicon Luminous
drilling or tapping Tritium Front Sight Post…
is required for (CP-25F) $57.95 This AR
installation on type front sight post (shown
your front right) is functionally identical
sight base. to the standard front sight
post and fits either A1 or A2
Aluminum Scope Mount… (RAY-002) $21.95 An models and includes Sight Tool. Illumination from the
anodized, machined aluminum, “see-thru” Picatinny Tritium inserts are guaranteed for 10 years by Trijicon.
rail mount (Weaver also) which allows use of existing Trijicon Rear Sight Aperture… (CP-25R) $38.00
iron sights. It attaches to the carry handle with a An effective ghost ring style flip-up aperture for the AR.
thumbnut. Houses two Tritium inserts in the larger aperture.
Trijicon Tritium Sight Set… (CP-25) $89.95
Both Front and Rear Sights as shown above, plus
Front Sight Detent and A1/A2 Sight Adjustment Tool.
Sights, Scopes & Mounts 66 Orders – 1 800 998 7928
BUSHMASTER SIGHTS, SCOPES & MOUNTS… The Aimpoint® CompM3…
Aimpoint Comp
Aimpoint
Aimpoint created the CompM3 to offer police and armed forces
System
Components
Comp M3 personnel equipment able to handle any situation, anytime,
anywhere. This revolutionary sight - with Aimpoint’s 30 years of
Aimpoint 3X Magnifying Module design innovation - features
rugged construction, and
revolutionary Advanced
Circuit Efficiency
Technology (ACET) that
gives the sight unparalleled
Aimpoint TwistMount battery life and ease of use. The
ARMS RingMount &
Cantilever Spacer
CompM3 works with any
for CompM3 generation of night vision
device (NVD) and is built
primarily for armed forces and
police use to hold up under
the roughest physical
handling and most severe
weather conditions. The CompM3 is
also ideal for hunters and sport shooters.
Aimpoint® CompM3 Sight… (11408) $556.00 The Aimpoint Comp3 Passive Red Dot Collimator Reflex Sight
offers has capabilities not found in other sighting systems… Features include: • Compatibility with every
generation of NVD • ACET Technology allowing 50,000 hours of operation on one single battery (on setting 7 of 10
- Battery Type: 3 Volt Lithium battery included - type 2L76 or DL1/3N) • 500,000 hours of use on NVD setting
• Magnification 1X - Reticle Size: 2 MoA • Unequalled light transmission • Submersible to 45 meters (135 feet)
• Replaceable outer black rubber cover offering protection and an additional stealth
factor • Rugged, durable construction unaffected by extreme
weather conditions • Unlimited field of view • Unlimited eye
relief • Parallax-free • No laser emissions that could be harmful
to your eyes • Mechanical switch for speed and reliability
• Increased aiming confidence • Reduced training time and
ammunition • Switch - Dot Brightness - 10 settings – 4 NVD, 6
Daylight • Body: Extruded, high strength aluminum, hard
anodized, with dark graphite gray non-glare finish • Lens Covers
of black, non-glare thermoplastic elastomer • Adjustments: 1 click = 10 mm at 80 meters = 13 mm at 100 meters
= 1⁄2" at 100 yds • Dimensions: Length - 130 mm (5.1” ) Width/height - 55 mm x 55 mm (2.2” x 2.2 ”) Weight -
include lens covers and protective rubber shroud - 270 grams (9.5 oz)
Aimpoint® 3XMag Magnifying Module… $535.00
(11324) This Magnifier is compatible with the CompM3 Sight for
maximum flexibility in the field. When combined with Aimpoint’s
patented TwistMount (see next page), the 3XMag offers the
ability to jump from CQB (Close Quarters Battle) to semi-sniping
and vice versa. Hunters can rapidly switch from non-magnifying to
magnifying while still being able to keep their Aimpoint sight on the firearm. The versatile 3XMag can also be used
as a handheld magnifying monocular for discrete observation and identification. Unique features include: • Mounts
on rail system behind Aimpoint sights with either Aimpoint TwistMount, or a regular 30mm ring • Provides
extended range to the operator • No influence on point of impact – No need for re-zeroing the sight • Magnifica-
tion – 3X • Eye relief at 5° FOV 40 – 90 mm / at full FOV 60 – 65 mm • Body: Anodized aluminum, dark grey,
rubber covered • Body’s bottom surface has 4 screw holes for other mounting alternatives • Dimensions: Length -
110 mm (4.3") Width / Height - 44x41 mm (1.7" x 1.6") Weight - 200 g (7.1 oz)
ARMS #22M68 Ring Mount for Aimpoint® CompM3… ARMS #22M68 Cantilever Extension
(10950) $138.00 A rugged ARMS Mount designed with a wide (11317) $35.00 Designed to align the
clamping cradle for the CompM3. It features a single Aimpoint® CompM3 sight with the
ARMS quick throw lever locking system to guarantee 3XMag Module when used with the ARMS
repeat zero on any Picatinny Rail - solid, quick, easy to #22M68 Ring Mount at right. Low std.
mount or remove. The “no-mar”pad built into the height allows perfect Red Dot co-
throw lever protects the Picatinny rail’s edges and witnessing on M16/M4 models. Machined
the mount’s two pieces can be separated for use steel with grey phosphate finish.
with the Cantilever Spacer (at right) to match the
CompM3 with the 3X Mag Module above.

Sights, Scopes & Mounts 67 [Link]

BUSHMASTER SIGHTS, SCOPES & MOUNTS…
Aimpoint® SRP-M Quick Detach Mount for Comp M3 Sight… (10830) $29.00 A solid,
simple 30mm wide-ring high mount with a large knurled thumbnut for easy on / easy off
attachment to any MIL-Std 1913 Picatinny Rail. Optical center over the top of the Picatinny rail
is 26.1mm (+/- 0.1 mm) - may require a riser block for sighting over a standard AR front sight.
Aimpoint® TwistMount for 3X Magnifer… (11355) $164.00 The
recommended mount for the 3XMag is this Aimpoint Twist Mount - allows for
quick attachment and detachment. Simply lift the rear lever, then twist 90° to remove the
3XMag - solid, fast, and fits any MIL-Std 1913 Picatinny Rail.
Spacer for Aimpoint® TwistMount… (10566) $11.00 A compan-
ion piece to the TwistMount designed for “co-witnessing” between
3X Magnifier and CompM3 on same plane rails. It raises the 3XMag
in the TwistMount to match the height of the CompM3.
NEW… MeproLight® M-21 Day/Night Illuminated
Reflex Sight… The right solution for military, police and
sportsmen when rugged construction and reliability count.
Shoot faster – target quicker – with both eyes open. The
Mepro 21 is a maintenance free, dual illuminated, red dot
reflex sight especially designed for quick and instinctive
accurate shooting – perfect while on the move in close
quarters where the use of both eyes is critical.
The Mepro 21 provides instant, all light aiming without
batteries. Illumination for the aiming point comes from a
fiber optic collector in daylight situations and from a
miniature, self-powered tritium light source at night. Mepro M-21
Transition between the two systems is instantaneous and Reticle Options
automatic to assure good contrast between aiming dot and
target area. The sight’s large 30mm diameter lens assures an Bulls Eye
unlimited field of view, rapid target acquisition, and effective Reticle Open “X” Shape Reticle
use of the weapon in extreme conditions or under duress. Designed and manufactured to the highest military
standards, the Mepro 21 assures years of reliable operation under all field conditions. Mounting on your weapon is
easy with dual quick release levers offering solid attachment onto any Picatinny rail. Weight is 13.23 oz. / Length:
4.53” / Width: 1.65” / Height: 2.13”. Available in two different reticle patterns (shown above):
MeproLight® M-21 Day/Night Illuminated Reflex Sight w. Bulls Eye Reticle… (ML96630) $580.00
MeproLight® M-21 Day/Night Illuminated Reflex Sight w. Open X Reticle… (ML96730) $580.00
NEW… LEUPOLD® Mark 4 4.5-14 X 50mm Leupold® Mark 4® Long Range/Tactical
LR/T (Long Range/Tactical) M1 Scope… riflescopes are some of the most dependable,
highest performing riflescopes you’ll find
anywhere. Their accuracy is proven in the field.
Their rugged and absolute waterproof integrity is
Mil Dot Reticle Duplex Reticle unquestionable. They are everything a long-range
competitive shooter, target shooter, or hunter could ask for.
Every component of these precision scopes is working together
to make every shot count. The Leupold Index Matched Lens
System® delivers unsurpassed sharpness across the visual field,
brightness, and contrast for excellent target definition, even in
low light. Side focus parallax adjustment offers fast, easy parallax focusing
from 75 yards to infinity – from any shooting position. Finger-adjustable ¼ M.o.A.
windage and elevation adjustments are clearly defined with audible, tactile clicks.
Once sighted in, adjustment knobs can be zeroed. The Leupold® Mark 4® LR/T® is
available with either the Mil Dot, or Duplex® reticle. The Mil Dot reticle provides
accuracy of range estimation for hunters and target shooters. A 30mm maintube offers
incredible strength and allows for the greater range of windage and elevation adjustment.
(100 M.o.A. each). Flip-open lens covers are standard issue with each Mark 4 LR/T, and these
rugged and waterproof scopes can withstand incredible abuse. Weight is 22 oz. / Overall Length: 12.5” / FOV @
100yds. - 19’. Finished in Matte Black. Available in two different reticle patterns (shown above left):
LEUPOLD® Mark 4 4.5-14 X 50mm LR/T M1 Scope… w. Duplex Reticle… (54660) $1,219.99
LEUPOLD® Mark 4 4.5-14 X 50mm LR/T M1 Scope… w. Mil Dot Reticle… (54560) $1,374.99
Sights, Scopes & Mounts 68 Orders – 1 800 998 7928
BUSHMASTER SIGHTS & SCOPES…
NEW… LEUPOLD® Mark 4 4.5-16 X 40mm
LR/T (Long Range/Tactical) M1 Riflescope…
with Mil Dot Reticle… (50541) $1,874.99 Mil Dot Reticle

The superb Leupold® Mark 4® LR/T Long Range/Tactical 16x40mm M1 Riflescope – incredibly rugged, absolutely
waterproof. Totally accurate. Proven in the field. The Leupold® Mark 4® LR/T® fixed power riflescopes have a combina-
tion of performance and features that have made them the choice of some of the world’s top hunters and competitive
shooters.
• The Multicoat 4® lens system delivers extreme clarity from edge to edge of the visual field, outstanding contrast,
and a bright sight picture even in extreme low-light conditions.
• Side focus parallax adjustment for fast, easy parallax focusing from 50 yards to infinity, from any shooting
position.
• Finger-adjustable ¼ M.o.A. windage and elevation adjustments with audible, tactile clicks.
• Once sighted in adjustment knobs can be zeroed.
• Available with the Mil Dot Reticle to provide accuracy of range estimation for hunters and target shooters.
• The 30mm maintube offers incredible strength and allows for the greater range of windage and elevation
adjustment (140 M.o.A. of elevation adjustment and 45 M.o.A. of windage adjustment).
• Flip-open lens covers are standard issue with each Mark 4® LR/T Riflescope.
• Rugged and absolutely waterproof, these LR/T riflescopes helped to set the Leupold Mark 4 standards, and can
withstand incredible abuse.
• Weight is 22.5 oz. / Overall Length: 13.1” / FOV @ 100 yds. - 6.8’. Finished in Matte Black.
Leupold® Mark 4® Steel Scope Rings… In the field, the durability of your gear
makes the difference between a successful hunt - or otherwise! Leupold Mark 4®
Steel Scope Mount Rings are rugged, solid steel construction, and highly recoil
resistant, so they’re strong enough to withstand any abuse, yet precise enough to
retain your rifle’s accuracy. They mount easily onto any Picatinny rail. Sold per pair.
Leupold Mark 4® 30mm Scope Rings… Medium Height… (61049) $185.00
Leupold Mark 4® 30mm Scope Rings… High Height… (60699) $185.00
EOTech 512 Holographic Diffraction Sight (HDS)… (EOT-512)
$425.00 The Model 512 Sight has become EOTech’s most popular sight in
the commercial market as it will run on 2 AA batteries (lithium, alkaline
[included], or rechargeable) for 1100 hours continuous at a reticle
brightness setting of 12 (20 settings total). It mounts to any Picatinny
rail standard on the flattop receiver AR15, M16 or M4 type
weapon, or any Weaver dovetail rail, with an integral mounting
mechanism tightened by means of a large knurled thumbscrew.
Mounting on an AR15, M16 or M4 fixed carry handle requires
addition of a Picatinny Rail mount (see Part# RAY-002 or the
ARMS #2 mount). The AR15/M16 and M4 flat-top mounting
platform provides for co-witnessing iron sights within the 512's
Heads Up Display while maintaining the operator’s critical cheek weld position. The Sight’s Reticle offers a 65 MOA
ring with a 1 MOA dot. Windage and Elevation adjustments are made by means of large slotted screws on the side
of the case (use a coin, screwdriver or spent casing). The AA Battery compartment cover removes by lifting a
locking lever on top, then lifting the battery case up and away from the sight. A rugged protective hood is built
around the reticle. Sight length is 5 inches (131 mm) and weight with 2 AA batteries is 11.43 oz. (.32 kg).
This Eotech 512 Holographic Weapon Sight is equipped with the latest membrane switch design to provide
excellent tactile response and positive snap feeling upon depression of the switches. Raised inlays around the
switches provide a clear separation between brightness controls to ensure correct actuation. The 512 offers a
convenient battery check feature so that if battery power is less than 20%, the reticle will blink on and off for 5
seconds. Additionally it will automatically shut down after either 4 or 8 hours depending upon which button (Up or
Down) is used to power it up. Manual shutdown is performed by pressing both Up and Down simultaneously.
EOTech offers a two year warranty against defects in workmanship or materials on the 512 Holographic Sight.
Sights, Scopes & Mounts 69 [Link]
BUSHMASTER SIGHTS, SCOPES & MOUNTS…
EOTech 510 HDS Sight… (EOT-510) $389.00 Similar to Model 512 on
previous page, but powered with a compact N type battery for space savings. In
Representation of
CQB (Close Quarter Battle) environments, this revolutionary optic delivers EOTech Reticle
speed gains in initial weapon presentation, accuracy in multiple target
situations, uncompromised use of peripheral vision, and leaves no
muzzle signature (The projected reticle is visible only to operator). The
HDS locks onto the target as fast as your eyes do, and has been
designed and tested to provide consistent, reliable
performance even in the most hostile operational
environments. It is waterproof, fogproof, shockproof, and
temperature proof. The Heads Up Display is constructed with 3 layer, 3/16" thick shatterproof laminate glass for
durability – additional display protection is provided by a rugged "roll bar" type hood. 1 M.o.A. reticle aiming dot.
EOTech Model 552 HDS Sight…(EOT-552) $499.00 EOTech’s Model 552
Holographic Diffraction Sight (HDS) features the rugged quality of all their
models, but incorporates the convenience of common
AA battery power. In normal operation, there are 20 Representation of
EOTech Reticle
reticle brightness settings in either 4 or 8 hour
auto-shutdown modes. With “heads-up display”
technology adapted from F-14 Tomcat Fighters, the
Holographic Diffraction Sight is the first
electro-optic sighting system to apply holographic
technology to small arms. The Model 552 features
a night vision mode capability which can only be
used with night vision equipment such as ANSPV7 Goggles or ANSPV14 Night Vision Scope/Goggle (must be used
with night vision equipment to achieve full Night Vision Mode compatibility - but can be used as a normal
holographic sight). With this system, 1 M.o.A. groupings can be achieved out to 300 yards. Windage and Elevation
can be adjusted in 1/4 M.o.A. increments.
With state of the art digital electronics design, the EOTech is waterproof, fog proof and shockproof. Twenty
levels ensure proper brightness control in either low light or bright sunlight. A microprocessor provides automatic
battery check indicator, up/down brightness scrolling and programmable auto shut down. Electronics are
encapsulated in shock absorbing resin compound, and the sight’s tubeless design provides an unobstructed field of
view for two-eyes-open shooting. Simply look through the 1/4" thick shatterproof laminate window, place the
reticle image on the target and shoot. 1 M.o.A. aiming dot reticle patterns are instantly visible in even the lowest
light, instinctive to center regardless of the shooting angle or position, and remain in view between shots.
Additionally, anti-glare coatings on the optical surface eliminate any muzzle side reflective signature, and a rugged
“roll-bar” hood protects the display. The EOTech HDS will mount to any Picatinny configuration rail.
EOTech Model 553 SOCOM Model HDS Sight… (EOT-553) $675.00 Similar to the Model 552 above with
upgraded switch mechanism; submersible to 66 feet; includes 7mm mounting base with dual ARMS Throw Lever
mechanisms to speed installation and removal with no loss of zero. Extensively tested by US SpecOps Command.
The Trijicon A.C.O.G. (Advanced Combat Optical GunSight) for AR15/M16…
(TA01) $990.00 The finest optical design, 100% U.S. made
components and Mil-C-14806A multi-layer coated glass
elements make the ACOG the ultimate telescopic sight.
Tritium elements cause the black daytime reticle in the
ACOG 4x32 to glow red at night and in low light. A forged TA01 Reticle
aircraft aluminum housing is precision machined and hard
anodized to match the finish of the M16. The ACOG’s unique
internal adjustment system (only the prism housing moves)
makes this the most rugged scope available – it will withstand
exposure to temperature extremes, salt spray, fog, fungus,
humidity, sand, dust, shock, vibration and aerospace seals make the ACOG waterproof. A see-through channel in
the integral base permits use of the iron sights while the scope is mounted. Attachment to the rifle’s carry handle is
with one or (optionally) two screws. Trijicon ACOGs are adaptable to H&K; Sig 550; Beretta AR 70/90 with various
A.R.M.S. adaptors. Dovetail adaptors for popular hunting/target rifles are available.
Trijicon TA51 Mount for ACOG… (TA51) $84.95 Knurled thumbnuts allow quick
installation/removal on mil. spec. Picatinny rail flat-tops. The ACOG Scope (above)
mounts into this with two screws – use Loctite to keep it from “shooting loose”.
Sights, Scopes & Mounts 70 Orders – 1 800 998 7928
BUSHMASTER SIGHTS, SCOPES & MOUNTS…
Trijicon ACOG TA01NSN Special Forces Sight… (TA01NSN) $1115.00 This Trijicon ACOG fits the
AR15/M16 “flat-top” rifles and includes the TA51 Flat-top
Mount shown here. ACOG is an acronym for Advanced
Combat Optical Gunsight - and this one is the choice of
many Special Forces groups. It has been designed to
withstand shock, vibration, temperature extremes,
water, dust, sand and hard surface drops. Unique TA01NSN Reticle
Representation
modifications to this model include an integral rear
ghost ring aperture and a tritium glow-in-the-dark
front sight for close combat back-up sighting. This
model’s TA51 Mount also works with the Trijicon
TA01, and is sold separately on previous page.
The I.O.R. Bucuresti 4 x 24mm M2 .223 Tactical Model… $490.00 (IOR-B-4x24-M2) From one of
Europe's oldest and largest optical factories, versions of this scope have been in military service for over
30 years - all made to strictest military standards. It has a bullet drop compensated cam calibrated for
the .223 cal. 62 grain projectile in ranges from 200 to 800 meters. For low light
shooting, the seven stage battery powered reticle glows red to assist in target
acquisition. The I.O.R. M2 .223 Tactical model features:
• a battery illuminated NATO Style Range-finding Reticle;
an adjustable diopter; 30mm tube diameter; and a 29' field
of view at 100 yards (2032 3V Lithium batterys).
• a Carl Zeiss developed T3 lens coating system, with full
Rings
multi-coating and anti-reflection treatment to eliminate not included
glare and maximize light transmission
• “0” ring sealed 6061 T6 Mil. Spec. alloy housings
• Superior optical glass by Schott Glasswerk of Germany Representation of
I.O.R.’s NATO Style
• Nitrogen Filled / Waterproof / Fogproof / Shockproof Rangefinding Reticle

I.O.R. Bucuresti Quick Detach Rings… Medium Height (1/2" rise) $119.95/pair (IOR-B-QD-Ring-Me)
I.O.R. Bucuresti Quick Detach Rings… High (3/4" rise) $129.95/pair (IOR-B-QD-Ring-Hi) Mount these fine
I.O.R. scopes with matching I.O.R. 30mm heavy steel scope mount rings. Available in either medium or high
versions, they feature sturdy quick-detach levers and four clamping screws on each ring
assure a rigid mount with removability and a guaranteed return to zero. The High Ring Set
(pictured here) is designed for the A3 type flat-top upper receivers.
I.O.R. Bucuresti Ring Inserts… (Not Pictured) Machined steel inserts for mounting
1" diam. scopes within the 30mm ring sets above. Set of 4… $21.95 (IOR-B-1in-Insert)
New… Leatherwood Camputer M-1000 2.5X - 10X A.R.T. (Automatic Ranging & Trajectory)
Riflescope… (LW-44) $459.00 More than just another riflescope, the Leatherwood M-1000 is an extremely
advanced sighting system – the basics of which have now been in constant military use for more than 40 years.
With the introduction of the Leatherwood M-1000, using this sytem has never been easier or more user friendly –
and is adaptable to a variety of calibers from .223 to .50 BMG
All the shooter needs to do is place the reticle on the target, zoom in to “frame” an area of known size (i.e. the
18” height of a buck’s chest cavity), aim, and squeeze the trigger. It all takes less
than 5 seconds, and the shooter’s eye never leaves the scope. When the shooter
frames an 18” or 1 meter target using the brackets in the
reticle, the scope will automatically range the target
and compensate for bullet trajectory for distances of
250 to 1,000 meters. This means no “holdover” or
guesswork. The M-1000 features Multi-Dial Rings for
up to 4 different zeroes, a new Picatinny mount with
built-in windage adjustment, and a “No Math” Mil
Dot reticle. Construction is of quality optical glass,
Leatherwood aircraft aluminum, with clear control knob increment
M-1000 Reticle markings, and a non reflective finish.
ALSO… Leatherwood M-1200 6-24x50mm Camputer ART Riflescope for .308 - .50 BMG… $599.00
(LW-50) For ranges from 300 to 1200 meters (200m range setting also provided). 50mm adjustable objective –
“No Math” Mil Dot reticle – air to glass surfaces are fully multi-coated for brilliant high resolution – adjustments
are tactical type with 1/8 minute clicks. Includes rings and a clamp-on flat-top mount for Picatinny and Weaver rails.
Sights, Scopes & Mounts 71 [Link]
BUSHMASTER SIGHTS, SCOPES & MOUNTS… Leatherwood Hi-Lux 30mm Red
Dot Sight… (LW-RD30) $83.95 This compact Red Dot Sight for 5.56mm / .223 Rem. Caliber, and other Picatinny
or Weaver Rail applications, was designed to offer quick target acquisition, and easy “two eyes open” shooting.
After zeroing in the sight, just place the red dot on your target, and you’re ready. The non-magnifying Leatherwood
Hi-Lux 30mm Red Dot features a 1 M.o.A. Dot, highest quality optical glass, elevation and windage adjustments,
heavy aircraft aluminum construction, and a matte black non-reflective finish. The brightness of the red sighting dot
is controlled by an 11 position rheostat on the
top of the sight with clearly marked increments
on the control knob. That large knob also serves
as the battery case - holding one long-lasting 3
Volt Type ECR2032 lithium battery. Ribbed rubber
rings protect the sight body against knocks and
drops, and mounting on your rifle’s
Picatinny/Weaver rail is made simple with the
two knurled thumbnuts on the sight’s integral
base. The Leatherwood 30mm Red Dot is fully
waterproof, shockproof and backed by a Limited
Lifetime Warranty.
Leatherwood Hi-Lux
ALSO… 50mm Red Dot Rifle Sight…
(LW-RD) $105.95
This larger Leatherwood Red Dot Sight offers a 50mm viewing area with an 88 foot
Field of View at 100 yards. An integral Picatinny type rail mount with large thumb
screw clamp nuts makes installation/removal easy and offers excellent repeat zero. The
1 M.o.A. red dot system is powered by an ECR2032 lithium battery (included). Dot
brightness is controlled by a twelve step rotating switch – windage and elevation
adjustments are built in, and covered by protective caps. Limited Lifetime Warranty.
Leatherwood Camputer A.R.T. Scopes Riser Blocks for Picatinny Rail Flat-tops…
Instructional Video… (LTAPE) $10.95 (LW-RB) $13.95 each Black anodized
Features/Operation of Leatherwood Automatic aluminum riser blocks offer extra height for
Ranging and Trajectory Camputer Riflescopes. proper sight picture and comfortable cheek weld.
Simmons' new Master Series™ AETEC® is one Simmons AETEC® Master Series
of the most innovative, high performance scopes 2.8 - 10 x 44mm
ever designed. Featuring Simmons' Scope… (2101)
™
patented TrueZero flex erector $189.95
system and new windage and
elevation dials, the new AETEC
delivers remarkably consistent
shot placement and precise
MOA adjustments throughout
Simmons
the entire range. Aetec Reticle
Add Simmons' new QTA™ Representation
Quick Target Acquisition eyepiece, which delivers a constant minimum 3.5 inches of eye relief and one of the most
generous eye boxes in the industry, and you'll have the confidence to know that your AETEC will get the job done
from shot to shot and season to season. The aspherical lens system found on this quality scope was first used on
expensive binoculars and cameras. Simmons has adapted this technology to the rugged AETEC scope – allowing a
wide field of view with a completely flat image and edges that are as bright as the center. The Master Series AETEC
2.8 - 10 x 44 mm Scope offers longer eye relief than conventional wide angle systems and features a fully
multi-coated lens system and 1/4 min. adjustments. True one piece tube construction is utilized - meaning the entire
scope is machined - from premium grade aluminum - as a single unit from end to end. It is waterproof, fog proof
and weatherproof, has Suregrip™ rubber coated adjusting knobs, and Hydroshield™ water and condensation
resistant lens coatings. Innovations to the Simmons Aetec Scope include:
• Simmons' exclusive true one-piece tube construction for increased mounting area
• Aspherical lens technology and fully multi-coated optics for the brightest, sharpest image in its class
• HydroShield™ lens coating helps maintain a clear sight picture – regardless of weather conditions
• New SureGrip™ rubber surfaces on all eyepieces and side-focus parallax adjustments make the AETEC one of
the easiest scopes to adjust in the field
Description Field of View Eye Relief Exit Pupil Weight Click Value Adjustment Reticle Parallax
2.8 - 10 x 44 (ft. @ 100 yds) (inches) (Millimeters) (ounces) (MOA) (Range) Truplex 100 yds
Black Matte 43.5/11.5 3.5 15.4 - 4.5 13.8 1/4 80/80
Sights, Scopes & Mounts 72 Orders – 1 800 998 7928
A.R.M.S. SIGHTS, SCOPES & MOUNTS… A.R.M.S. #39A2 Bi-Level Rail… (ARMS 39) $148.95
Mounts to M16A1 & A2 Carry Handle for multiple combinations of attachments, and provides rigid support of the
dovetail platform that is extended over the handguards. A “brush
breaker” on the front will prevent branches from snagging under the
rail, and a “see-thru” channel in the #39A2 Upper Rail allows the
use of existing iron sights.
Note: This Rail System will not
mount on the A3 Removable
Carry Handle.
See the A.R.M.S. S.I.R. System
in the Handguards Section
of this catalog - Page 52.
A.R.M.S. #2 Scope Mount for M16A1/A2… (5855-01-299-777) $68.95 An excellent handle mount type
scope platform for the AR15/M16 rifles featuring the Swan universal mounting platform which accepts most all
current military and police sighting systems, including NATO Stanag
and Weaver type rails, without the need for adaptors. Other features
include: see-thru channel for iron sight use; fast positioning with fixed
toggle bolt; self-locking thumbnut - will not loosen; repeatable zero hold.
A.R.M.S. #5 MultiBase… (ARMS 5) $68.95 A quick detach, multiple
eye relief mount featuring a spring loaded clamping bar and NATO Stanag &
Weaver rail fastening. Easily mounts to Picatinny/Weaver type rail or flat top
receiver with locking, captivated thumbnuts.
A.R.M.S. #19 Weaver/Stanag Throw Lever Mount… (ARMS 19)
$159.95 Mount scopes, sights, etc. directly onto the A3 flat-top receiver
with guaranteed repeat zero or, with an ARMS#2 carry handle mount,
interfaces to M16A1/A2/M4.
A.R.M.S. #19A Throw Lever Channel Mount for ACOG Sights…
(ARMS 19 A) $170.00 The “channel” mounts Trijicon ACOG Scopes to mil.
spec. Picatinny/Weaver rails with convenient A.R.M.S. repeat zero throw
levers (positioned on left side so as not to obstruct the rifle’s ejection port).
A.R.M.S. #40L Low Profile Flip-Up Rear Sight… (ARMS 40L) $119.95 A design improvement on the ARMS
#40 below, this sight achieves a super low profile (.610 height when folded) and uses the same rugged lock down
quick release lever and “no knockdown” stainless steel retention spring. A unique “sandwiched” dual aperture
flip-up combines a stationary close combat aperture and a 300 meter long distance accuracy aperture. The
automatic zero stainless steel retention plate and clamping bar/pin won't rust, other parts are matte black finished.
This sight includes a newly designed, miniaturized windage adjustment knob, will fit any mil. spec. flat-top Picatinny
rail, and is as robust as the rest of the ARMS #40 series. It carries
U.S. Pat. No. 5,533,292. Note: This sight is designed to work
in conjunction with the A.R.M.S. SIR System forends in
our Handguards Section. Due to the aperture height on
this sight, you should order the .040 taller Front Sight Post
on Page 66 of this catalog (9349056-M).
A.R.M.S. #40 Standard A2 Flip-Up Rear Sight… (ARMS 40) $116.95 This U.S. Patented Flip-Up Rear Sight locks
down with a quick release lever when not in use (shown in both deployed and lock-down positions). Its flip-up combines
a 250-300 meter close combat aperture and a 500-600 meter aperture with a horizon line feature that helps lead distant
targets. The automatic zero stainless steel retention plate and clamping bar/pin won't rust, all other parts are matte
black finished - fits any mil. spec. flat-top Picatinny rail. This sight includes a
newly designed, non-protruding, windage adjustment knob. Note: This sight is
designed to work in conjunction with the A.R.M.S. SIR System forends shown
in our Handguards Section. Due to the aperture height on this sight, you
should order the .040 taller Front Sight Post shown on Page 66 (9349056-M).
A.R.M.S. #22 Throw Lever Rings… $123.50 per pair Patented 30mm A.R.M.S. #37 Ring Inserts
steel rings secured with A.R.M.S. dovetail system to an extruded (ARMS 37) $29.00 Steel
aluminum platform. “No-Mar” pads protect the rail and spring inserts that allow
loaded levers act as shock absorbers - guaranteed repeat zero use of 1" diameter
hold. Available in three heights: Low - 1/4" rise (ARMS 22L) / scopes within
Medium - 1/2" rise (ARMS 22M) / High - 3/4" rise (ARMS 22H) 30mm ring sets.
Sights, Scopes & Mounts 73 [Link]
BUSHMASTER SIGHTS, SCOPES & MOUNTS… B.M.A.S. Low Profile Rear Flip Sight
B.M.A.S. Clamp-on Rear Flip-Up Sight (YHM-9680) $91.95 This flip-up rear sight for flat-top receivers
(YHM-9440) $79.95 An aircraft grade features a steel base, a quick release thumb screw, and an
aluminum, flip-up auxiliary sight featuring aluminum stem – it locks up (deployed position) with the push of a
dual apertures, 1/2 M.o.A. windage button, and folds down to .840 inches above the upper receiver.
adjustment, black anodized Windage adjustment is 1/2 M.o.A., and a dual aperture rear peep is
finish, convenient right fitted. Mounts to any Picatinny rail and will
hand adjustment knob and “co-witness” with standard AR15, M16 and M4
full height sight apertures. type front sights. Once
Height when folded is sighted-in on your rifle, it
1/8" lower can be removed and
than similar reattached with no loss of
designs. “zero” – also fits behind
A.R.M.S. S.I.R. System forends.
Bushmaster Modular Accessories System (B.M.A.S.) Front Flip Sight for V Match Rifles and
Carbines… (YHM-9360K) $106.50 A high quality front sight that clamps around the V Match milled
sight base/gas block - designed to be used with any open iron rear sight. This patent pending Front Flip
Sight is machined from aircraft aluminum with an anodized finish, installs with an
Allen wrench, locks up or down with a push button and is elevation
adjustable. A standard front sight post is included, and the base is drilled
and tapped for our B.M.A.S. Sling Swivel Stud (see YHM-9364 below). Sight
is shown installed at left, and complete (deployed) at right.
B.M.A.S. Flip Sight Sling Swivel Stud… (YHM-9364) $4.95 Threaded 3/8 x
24 to fit the V Match Front Flip Sight above – accepts any Q.D. type sling swivel.
Bushmaster Modular Accessories System Detachable Front Flip Sight and Three-Rail Gas
Block… The B.M.A.S. Detachable Front Flip Sight (patent pending) clamps snugly on the gas block’s
top Picatinny rail with socket head screws for repeat zero every time. Machined from aircraft
aluminum billet, it locks up or flips down at the touch of a button. Standard A2 front sight post with
spring and detent locking system offers elevation zeroing just as with the original M16A2 sight.
The B.M.A.S. 3-Rail Gas Block can be ordered on new barrels as a factory installed
option, or we can factory retrofit existing sight bases on .750" diameter barrels. It’s three rails
are in standard Picatinny configuration to allow addition of flashlight or laser as side
mounted accessories. The B.M.A.S. Three Rail Block is precision milled from alloy steel;
finished in black manganese phosphate; and drilled and tapped on the bottom for the
addition of a sling swivel stud (Note: this stud is not intended as a bipod mount).
• B.M.A.S. Detachable Front Flip-Up Sight only… (YHM-9371K) $77.50
• B.M.A.S. Three-Rail Gas Block only… (YHM-9370) $56.50
• Front Flip-Up Sight/Three-Rail Gas Block SET… (YHM-9370K) $127.95
B.M.A.S. Folding Front Sight/Gas Block… B.M.A.S. Low Profile Clamp-on
(YHM-9394) $91.95 An all steel Gas Block/Folding Front Sight… (YHM-9584K) $78.95
Front Sight Combination easily actuated with the push A low profile Front Sight of quality
of a button – locks in the deployed position, it includes alloy steel that folds flat at the touch
a standard AR front sight post, detent and detent of its side button to allow clearance
spring, and is the same weight as a standard AR sight for any large bell scope. It flips up to
tower. Split design allows it to be mounted onto barrels lock in the deployed position with
that already have pinned or welded muzzle brakes or zero repeatability, and includes a
suppressors – attaches easily with 4 cap screws (use of standard, AR Front Sight Post and
Loctite is recommended). Includes Bayonet Lug and Detent System. Black phosphate
Sling Loop. Manganese finished – made in USA.
Phosphate finished for B.M.A.S. Fixed Clamp-on Front
protection, it is shown Sight… (YHM-9495K) $50.50 A
flipped up in the standard height front sight, this unit
foreground and folded adds the convenience of a quick detach
in the shadowed knurled thumbnut and clamping bar for
image. This unit fits all easy removal. Returns to zero upon
standard AR-15 type reattachment and includes standard
barrels with a .750” AR Front Sight Post and Detent
diameter at Gas Port. System – adjustable for elevation.
Sights, Scopes & Mounts 74 Orders – 1 800 998 7928
BUSHMASTER SIGHTS, SCOPES & MOUNTS… B.M.A.S. Triple Mount Rail Kit…
(YHM-639K) $89.95 A quality multi-purpose accessory mount that clamps to the barrel and fits around the front
sight with three separate rail surfaces to allow mounting flashlights, bipod, laser sights, etc.
Designed to fit both Post & Pre-Ban barrels (with bayonet lug), there are insert bushings
included with this kit that allow fitting to either .720" diam. rifle barrels (20"/24") or .740"
diam. (14.5"/16") carbine barrels. This triple mount will accept all Picatinny/Weaver base
attachments, and is machined from high quality aircraft aluminum with Allen head
clamping screws. Finished in black hard anodize to match rifle.
B.M.A.S. SuperLight Barrel Bushings… (YHM-640-4) $13.95
A set of thicker steel bushings to mounts the Triple Rail Kit above to
the thinner Bushmaster SuperLight Barrels.
Bennie Cooley Co-Witnessing Adjustable Mount… (EOT-12) $165.00 This optics mounting platform for the A2
Carry Handle AR15/M16 is the most versatile co-witnessing mounting system made. Vertically adjustable for easy
alignment and custom fitting of any red dot optic (EOTech Holosight, Trijicon Reflex, Aimpoint Comp or others) in
relation to the iron sights of the rifle. Mounts with a hex-head
nut/threaded post, and height adjustments are made to the
Picatinny rail with 8/32 button head retaining screws and
the supplied 3/32”
Absolute Co-Witness
in EOTech Window
Co-Witness in
Lower 25%
Allen wrench.
Bushmaster A3 Type Removable Carry Handle with 1/2 M.o.A. Rear Sight... (9349063-9) $116.95 Add
versatility to your “flat-top”– clamps solidly onto the Picatinny Rail of
any V Match or “Flat-top” Upper Receiver with knurled thumbnuts,
and includes an A2 Dual Aperture Rear Sight with 1/2 M.o.A.
windage and elevation adjustment. Machined from aircraft aluminum
forging, with steel sight and clamp parts.
B.M.A.S. Angled Accessory Mounts… Angled rail segments designed to mount various accessories at a 45°
angle on a “flat-top” Upper Receiver, or any multi-rail type forend. Useful for flashlights or laser aiming devices, or
with a pair, you could mount a scope in an “offset” position and still retain iron sight use. Available in 3
different lengths: A - One Slot (3/4” length); B - Three Slot (1 3/8” length); and C - Five Slot (2 1/8”
length). Machined from aircraft quality aluminum and finished in matte black hard
anodize, mount to your rail surface with socket head screws.
One Slot Mount (A)… (YHM-9486A) $21.95
Three Slot Mount (B)… (YHM-9690A) $26.50
Five Slot Mount (C)… (YHM-9691A) $30.95 A. B. C.
B.M.A.S. Rail Extension... (YHM-9474) $37.95 A 5" rail extension for any flat-top upper receiver to raise and
forward mount a variety of optics, extension’s height is the same
1/2" as B.M.A.S. scope risers below. Machined of aircraft aluminum
with a hard anodize finish – clamps solidly onto upper’s rail with Allen head screws.
B.M.A.S. Quick Detach Rail Extensions… 4"-7"-11.25" Lengths These precision machined Rail Extensions
– in standard Picatinny rail dimensions – mount on all flat-top Upper Receivers to elevate the mounting surface
approx. 1/2’’. The two longer lengths can join and solidify the Upper Receiver to any Four Rail Forend offering the
extra mounting surface length necessary for very large/long scopes or “scout-style” mounting. All 3 Rails offers the
convenience of quick detach/reattach with knurled thumbnuts. Anodize finished machined aluminum with
phosphated steel thumbscrews and clamping bars.
• 4" Q. D. Rail Extension… (YHM-9595) $39.95
• 7" Q. D. Rail Extension… (YHM-9592) $62.95
• 11.25" Q. D. Rail Extension… (YHM-9590) $86.95 7" B.M.A.S. Quick Detach Rail Extension

Bushmaster Modular Accessory System Scope Riser… (YHM-227A) $32.95 This Riser solves problems of
scope movement or rocking that might be encountered with individual riser sections. A 5.25” Picatinny Rail Section
mounts on any Flat-top Upper to raise the platform 1/2”.
Perfect on varmint rifles – accepts most types of scopes, red dot
sights, and other optics. Machined from aircraft quality aluminum
and hardcoat anodized to military specifications.
B.M.A.S. Scope Risers… Increase scope mounting height on flat-top style AR‘s A. B.
by 1/2 inch to achieve proper cheek weld. Hard anodized aircraft aluminum – fit all
Picatinny/Weaver rails. Two required for scope mounting – sold individually.
A. 3/4" Long… (YHM-9490) $13.50 / B. 1 1/4" Long… (YHM-226) $15.95
Sights, Scopes & Mounts 75 [Link]
BUSHMASTER SIGHTS, SCOPES & MOUNTS… B.M.A.S. Handguard Mounted
Flip-up Sight… (YHM-9627) $81.95 The Bushmaster Modular Accessories System
solution to a handguard mounted back-up iron sight is this low profile, front flip-up
unit. It attaches to any forend Picatinny rail, and folds down out of line of sight at
the push of a button. It locks up in a deployed position, and mounts easily with a
large knurled thumbscrew. Low profile, durable and lightweight all steel construc-
tion - manganese phosphate finished - includes AR square post, detent and spring
- elevation adjustable just like the standard sight.
B.M.A.S. Flat-Top Fixed Rear Sight… $102.50 Kwik-Site See-Thru Scope Mount and Scope
(YHM-643K) This AR15 type fixed Iron Sight offers the Ring Set… (KSN-M16) $53.95 For A1 or A2 rifles with
option of mounting optics further forward on the flat- the solid carry handle, this mount features a wide
top rail. The sight’s base is see-thru channel to enable the use of existing open
a heavy, black anodized sights. Mounts to
aluminum block - other the handle with a
parts are steel. large thumbnut.
Windage and elevation A pair of 1"
adjustments horizontally
are 1/2 split scope rings
M.o.A. is included.
Aluminum Scope Ring Sets… $15.95 per pair Snap-on Forearm Light Mount… (HPM3) $31.95
Top quality, matte black finished ring sets to fit any This heavy plastic base (shown installed, and
Picatinny rail. U.S.A. made - heat treated aluminum with separately) snaps onto AR-15/M16 Rifle Forends (won’t
8-32 socket head screws in 1" Low, Med. or High Profile fit the CAR handguards). Detents grip the forend vent
horizontally split design. 30mm style is vertically split. holes for a firm mount. On the side, a rail
Wrench included with each set. Specify: segment is mounted which is designed to
1" Low (W-20524) / 1" Medium (W-20515) accept a variety of tactical flashlights.
1" High (W-20525) / 30mm Medium (W-20513)

High Medium Low

30mm
1/2" Rise 1/4" Rise 1/8" Rise

M203 Grenade Launcher Quadrant Sights for A2 & A3 Type Rifles…

These are Government Issue Quadrant Sights for the M203 Grenade
Launcher. Sights include a Flip-out Post & Aperture System, combined with an
elevating scale set in 25 meter increments from 50m to 400m. There are
models for both the A2 Solid Carry Handle Rifles and Carbines, and the A3
Removable Carry Handle type (they are not interchangeable).
For A3 Removable Handle Rifles… (12598114) $105.50
For A2 Solid Carry Handle Rifles… (9346304) $81.95
First Samco Tactical Light Mounts… • First Samco 15/16" Tactical
These mounts will accept 1" or 15/16" diameter Light Mount… $31.95 (FBS-FAS-3)
flashlights and hold them solidly onto your rifle or For Streamlight Scorpion and other
carbine with an internal rubberized pad-clamp. It slides 15/16" diameter flashlights.
onto the First Samco M33 Handguard rail (see Page 54 • First Samco 1" Tactical Light
in this catalog - or any Picatinny type rail - and locks in Mount… $31.95 (FBS-FAS-2) For
place with a rugged push button mechanism. Molded Surefire & other 1" diameter tactical
of high density black polymer. flashlights.
Light & Laser Mounts for Bushmaster Carbon 15 Rifles and Pistols… These Mounts clamp to the barrel
fluting on Type 97 Pistols and Type 97 / 97S Rifles to offer mounting for various lights and lasers.
A. Laser Mount (AZ719) $26.95 Accepts 3/4” diameter laser
sighting units.
B. Mag-Lite Flashlight Mount (AZ717L) $26.95 Holds 3/4”
diameter lights.
C. SureFire Mount (AZ718) $26.95 Takes 1” diameter flashlights.
Surefire recommends their #650 Universal Weapon Light. A. B. C.
Sights, Scopes & Mounts 76 Orders – 1 800 998 7928
BUSHMASTER ACCESSORIES / APPAREL… Bushmaster Gas Piston Retro-fit
NEW! Bushmaster Gas Piston Retro-Fit Conversion Kit for Conversion Kit Components…
AR15/M4 type Carbines… (GP-GSR) $399.95 Now you can
easily add the Gas Piston System benefits of reliability, ease of
maintenance, ability to fire a wider variety of ammunition, cooler
running, and consistent function with this Bushmaster Gas-Piston
Retrofit Conversion Kit for AR15 and M4 Type Carbines. M4 Type Handguards with Heatshields
This Conversion Kit is a Patent Pending, short stroke piston
conversion system that includes all the necessary parts to
convert your gas impingement type carbine. The standard,
and often problematic, direct-gas system is replaced with a
Carrier, Piston and Piston Housing
lightweight operating rod and a low maintenance piston Piston
Housing
housed within a tubular structure that pins right into your Support
Operating Rod with Spring and Upper Receiver Guide Sleeve
existing front sight base – replacing the existing gas tube.
Once installed, there are no more broken gas rings, droopy Bolt Carrier with Striker Face
gas tubes or hot gases vented into the Receivers of your
weapon. Instead, this conversion vents the gases under the
hand guard and away from the operator. The high
performance bolt carrier features increased mass, an integral impact lug and specially designed anti-wear features
to protect your receiver. Unlike competing products, the Bushmaster Gas-Piston Retrofit Conversion Kit is readily
installed into your factory Upper Receiver Assembly without permanent modifications to your carbine. You keep
your factory receivers, barrel and bolt. Supplied with the kit are Heat Shielded M4 (oval) Type Handguards designed
specifically to withstand rapid fire heat. The result is a cleaner and more reliable system that is sure to enhance the
overall performance and reliability of your weapon. This Conversion Kit is fully functional for both semi-automatic
and full-automatic weapons, and can be easily installed at home with simple hand tools.
In the Photo below, the Bushmaster Gas
Piston Conversion Kit Components are installed.
Why do the barrel and some parts look so
discolored? – because this unit had just
successfully completed – without failure – a…
10,000 Round Non-Stop Endurance Test!

RealTree® Camouflage Furniture… Add RealTree® Camouflage to your AR Type Rifle –

perfect fitting replacements that are easily installed on your Carbine or
Rifle. These parts – tank dipped in RealTree® Camouflage Pattern film –
are true to nature, tough and beautiful, and make a great addition to
your hunting rifle. Sold individually, or in Stock/Grip/Handguard Sets.
• Rifle Length Handguards with RealTree® Camo… (9349059-C) $39.95
• A2 Solid Buttstock with RealTree® Camo… (9349119-C) $54.95
• Standard Pistol Grip with RealTree® Camo… (9349127-C) $19.95
• RealTree® Camo CAR Handguards… (1005-914-4572C) $29.95
• RealTree® Camo CAR Furniture SET… (CAMO-RT-CAR) $99.95
• RealTree® Camo RIFLE Furniture 3 PIECE SET… (as shown at left) (CAMO-RT-RIFLE) $106.95
Desert Camo Furniture… These Desert Camouflage
Pattern Buttstocks, Handguard Sets and Pistol Grips make great
add-on accessories for your hunting rifle or carbine. Highest quality -
same as on our standard rifles and carbines - tank dipped in beautiful
and durable Desert Camo Pattern film.
• Desert Camouflage Pattern Pistol Grip… (9349127-DC) $19.95
• Desert Camouflage Pattern Trapdoor Buttstock… (9349119-DC) $54.95
• Desert Camouflage CAR Handguards… (1005-914-4572-DC) $29.95
• Desert Camo 3 PIECE SET (as shown at left)… (CAMO-DC-CAR) $99.95
Bushmaster Accessories / Apparel 77 [Link]
BUSHMASTER ACCESSORIES / APPAREL… Bushmaster Rifle
The Bushmaster Rifle Case is economical storage, or travel Case… $18.95
protection for your Bushmaster, or other firearms. With 47"x 9"x (Part #10483)
3"dimensions, this case holds a full sized AR15/M16 rifle, or a scope
mounted AR with receivers separated. It’s a “clamshell” style design
molded of durable black plastic with eggcrate foam lining and four snap closures.
You can lock it with a padlock, and the Bushmaster name is molded into side panels.
Shipping for 1st Case is $7.50 / Addtl. Cases: $6.00 each.
Eagle Padded Rifle Cases for AR Type Rifles & Other Firearms… $79.95 Designed for professional use and
sewn with craftsmanship and care of heavy #1000 denier black Cordura nylon. With closed cell foam padding for
shock protection and additional water resistance, each case features a lockable outside cargo compartment;
adjustable magazine pouches; reinforced 2" wide carrying handles; heavy duty YKK zippers; and a 2" wide, padded
shoulder strap attached to welded steel D rings. These quality Eagle cases will fit most standard military type
AR15/M16 rifles, but are useful as an all around carrying case for other rifles as well. Made by Eagle in the U.S.A.
• Full Size Rifle Case… $79.95 (RC-4123) Approx.
internal dimensions: 40" x 11" (pictured here)
• Carbine Sized Case… $79.95
(RC-36) Approx. Internal Dimensions:
36" x 11" (like logo'd case below)
• 30" Carbine Sized Case… $79.95
(RC-3223) Fits FNC, LAR Para 30" & Tele AKs
• Extra Long Barrelled Rifle Case… $79.95
(RC-4608) Approx. Internal Dimensions: 45" x 10"
Bushmaster Logo Embroidered Carrying Cases... This case will fit FAL 44 1/2" & LAR-HB 45" rifles.
• Bushmaster Logo’d Carbine Case… $85.95 (RC-36A)
At left is our Bushmaster Carbine Case with the
Snake Logo Embroidered in Red & White.
Approx. Internal Dimensions: 36" x 11"
• Logo’d Rifle Case… $85.95 (RC-4123A)
A case for full sized rifles, with Bushmaster logo
embroidered in red and white - same features and
construction as Eagle Cases above. Internal Dimensions: 40" x 11"
Discreet Carrying Case for Carbines... When low profile is needed,
and personal protection has to be readily available, this 32" black
Cordura case does the job. Includes Four Interior Magazine
Pouches (for up to 40 Rd. Mags) and a Padded Outside Pocket
for accessories. Approximate Internal Dimensions: 32" x 13"
• Discreet Case for Carbines... $85.95 (DC-CAR-15)
• Discreet Case for Rifles... $85.95 (DC-M16/AR15)
A similarly styled model with Inside Dimensions
of 41" x 13" - designed for full sized AR15/M16
• Discreet Case for Uzi Short Bbl. SMG’s... $85.95
(DC-22) Approx. Internal Dimensions of 22" x 11"

The “Life Jacket” Safety Device for AR15/M16

Rifles… $29.95 (LJ-1) “More secure than a Trigger
Lock – more portable than a Safe” Lock up your prized
AR with the Life Jacket. This tough polycarbonate
clamshell enclosure locks up your AR type rifle and
covers the entire action. Two separate keyed locks and
keys are included. Foam padded interior protects your
rifle’s finish, and dual, tamper resistant hinge pins will
secure almost all AR type rifles - with fixed carry handle
or removable; all barrels with standard or DCM type free-floater forearms. Note: To
use the Life Jacket on a rifle with our V Match tubular aluminum forend,
some material will have to be removed from the front opening.
Bushmaster Sighting-in Targets… $2.95 / Pkg. of 12 (QP-015K)
25 Meter Targets with complete instructions to get your AR Type rifle zeroed in right!
Bushmaster Accessories / Apparel 78 Orders: 1 800 998 7928
BUSHMASTER ACCESSORIES / APPAREL… NEW! Bushmaster Blur Folder by Kershaw
For performance and style in a folding pocket knife, we offer the A Ken Onion Design… (1670RD) $94.95
Bushmaster Logo’d Kershaw Ken Onion Blur. This
premium quality knife features a 13C26
stainless steel blade for strength and
corrosion resistance. The Blur is “SpeedSafe”
equipped for smooth, one-handed opening, and the 6061-T6 anodized aluminum handle is durable and lightweight.
For extra traction and a secure grip, the handle includes Trac-Tec inserts for a non-slip grip in wet and slippery
conditions. Equipped with Locking Liner, Thumb Stud and Pocket Clip – ideal for extreme, or everyday use.
Specifications: Blade Length - 3 3/8 in. (8.6 cm) / Closed Length - 4 1/2 in. (11.3 cm) / Weight - 4.2 oz.
M9 Bayonet with Scabbard... $109.99 (GCC-M9 BLK BAYO) The BUSHMASTER M9 Multi-Purpose Bayonet
System is designed to serve as a bayonet, a fighting knife, field knife and wire cutter. It fits many Bushmaster
models as well as other M16 and AR15 type rifles and features a heavy 7.25" steel blade fitted with a checkered,
black composite plastic handle. The blade is black oxide finished to reduce
glare, and includes machined saw teeth on its back edge for light duty
sawing. The M9’s Scabbard is molded black composite plastic
with an internal steel flat spring for bayonet retention M9 Bayonet
within the scabbard. A nylon web strap with a snap & Scabbard
closure also prevents loss. The lower tip of
the scabbard incorporates a screwdriver
blade and a wire cutting mechanism
for barbed, and other wire. Bayonet
Wire Cutting
overall length is 14.5” (36.8 cm) Feature
and weight is 28 oz. (.79 kg) of M9

M7 Bayonet with M10 Scabbard... $34.95

(GC-BAYO SCAB KIT) Fits 20” & 14.5” Bbl.
AR15/M16 and AR180 - a quality Gov’t.
type Bayonet and Scabbard made in U.S.A.
NOTE... Bayonets are designed to fit only 14.5” M7 Bayonet & M10 Scabbard
& 20” Barrelled Rifles, and will only work with
certain Flash Suppressors / Muzzle Brakes
such as Birdcage types, Izzy Brakes; Phantoms; Mini & Y-Comps.
Consult Bushmaster Sales if you have questions about a particular application.
Bushmaster Blaze Orange Bushmaster Knit Caps…
Hunter’s Cap… $10.95 $9.95 each For colder weather
(QP-002OH) Bright blaze orange wear, these acrylic knit “tuk”
cap of soft twill with embroid- style caps are snug and
ered Bushmaster logo. “One size warm. Completely washable,
fits all”, with an adjustable rear they’re embroidered with a
strap and buckle mechanism. three color Bushmaster logo
on the rolled up area (avoids
the feel of the embroidery on
your forehead). Made in
U.S.A. - available in 4 colors
(clockwise):
Orange Knit Cap… (QP-002OR)
Made in U.S.A.
Black Knit Cap… (QP-002B)
Navy Blue Knit Cap… (QP-002N)
Gray Knit Cap… (QP-002G)

The Bushmaster Gun Pad… (QP-014) $9.95 It’s a sturdy counter-top

protector for gunsmithing assembly work, and it doubles as a computer
mouse pad (may not work effectively with an optical mouse due to red
printed areas). This big (18" x 12") brightly colored pad has crisp images of
Bushmaster rifles, a protective laminated surface, and a soft, non-skid foam
padded backing.
Bushmaster Accessories / Apparel 79 [Link]
 BUSHMASTER ACCESSORIES/APPAREL
< Bushmaster Canvas Cap… $9.95 (QP-002BR) This heavy duty Bushmaster
Hat features our snake logo embroidered in Red, Black and White, and is sewn from
a light brown canvas material (much like “Carhart” jacket
material) - excellent on those cooler days. This “one size
fits all” cap is adjustable to a wide range of sizes
with a rear strap and buckle mechanism.

> Bushmaster Two-Tone Cap… $9.95 (QP-002TTBR) With a look inspired

by NASCAR, this Bushmaster Hat features the snake logo embroidered in red,
black and white on a bright red and black cotton twill hat with white trim
on the bill. Universally sized with an adjustable strap and buckle
mechanism in the back – quality Bushmaster headgear!
> Bushmaster Black & Tan Caps… $9.95 ea. We’ve
embroidered our logo onto a soft brushed twill khaki tan
cap or our traditional black baseball style cap. The
embroidery is in red & white, or red, black and white,
depending on hat color. Durable, comfortable, and with
an adjustable back strap, one size fits all.

Black Cap… $9.95 (QP-001) / Tan Cap… $9.95 (QP-001T)

Bushmaster Fleece Lined Jackets… Lots of the folks
at the Bushmasterfactory stay warm all the Maine winter
long with this Fleece Lined Jacket. It’s Toughlan® nylon
shell is windproof and water resistant, it has a winter
weight 11.5 oz. fleece lining and 3 zippered pockets (2
outer and 1 inner) and our Bushmaster logo is
embroidered in red and white on the left chest.
Available in Black with Black Fleece Lining, or Khaki Tan
with Green Fleece Lining. Order with the part numbers
shown below followed by your size: S - M - L - XL - 2XL -
3XL - 4XL - 5XL.
Black Fleece Lined Jacket… $69.95 (QP-8800BB & size)
Khaki Fleece Lined Jacket… $69.95 (QP-8800TG & size)

Bushmaster Logo Sweat Shirts… Heavy

Jerzees “Super Sweats” crewneck pull-over
sweatshirts (50% cotton / 50% polyester) with
the Bushmaster snake logo embroidered in
red/white/black on upper left chest. Choose from
Khaki Tan, Black, or Gray. Order with part numbers below and your
choice of size: S - M - L - XL or XXL.
Khaki Tan Logo Sweat Shirt - $27.95 (QP-021K & size)
Black Logo Sweat Shirt - $27.95 (QP-021B & size)
Gray Logo Sweat Shirt - $27.95 (QP-021G & size)
Bushmaster Logo Patch… $2.95 (QP-012) A
three color embroidered patch - 3"wide x 2"
high. Great for sewing onto your range bag,
shooting jacket, etc. to show your
Bushmaster loyalty!
Bushmaster Logo Decal… $1.95
(QP-013) 41/2" wide, screen printed red and
black on white vinyl with adhesive backing
for toolboxes, bumpers, gun cases or
anywhere you want to display the Bushmaster Logo.
Bushmaster Accessories / Apparel 80 Orders: 1 800 998 7928
BUSHMASTER ACCESSORIES / APPAREL… Bushmaster Embroidered Logo
Bushmaster Logo Mug… $4.95 (QP-016) Will T-Shirt… $14.95 Heavy weight and
your shot groups improve if you drink coffee from high quality, 100% white cotton
this Bushmaster logo mug? We hope so - let us T-Shirt with Bushmaster Snake logo
know! Heavy, embroidered in red and black on the
black ceramic upper left chest. Order Part# QP-007
mug printed Followed by Size: M–L–XL or XXL
red & white.
NEW for 2007! – Bushmaster
Long Sleeve Logo Embroidered
T-Shirt… $16.95 Heavy weight
Black UltraBlend 50% Cotton / 50%
Polyester Long Sleeved T-Shirt.
Distinctive embroidered Red and
Black Bushmaster Snake logo on the
upper left chest.
Order Part# QP-022B-L Followed
by Size: M–L–XL or XXL
Bushmaster Screen Printed T-Shirts… Quality 50/50
Blend Cotton/Poly Shirts in White or Black. The Bushmaster
logo is silkscreened in two colors on the front left breast with
larger logo variations on the back. Order with Part Numbers
followed by size: S - M - L - XL or XXL. Front
Back
Black ScreenPrinted T-Shirt… $15.95 (QP-003 & size)
White ScreenPrinted T-Shirt… $15.95 (QP-003W & size)

Front
Back

Bushmaster Sport Shirts… A 50/50 blend knit

sport style shirt with collared, three button neck,
available in either white or black. The Bushmaster logo is
embroidered in two colors on the left breast. Comfortable, durable,
and great for the field, range or sporting event. Order with Part
Numbers below followed by size: S - M - L - XL or XXL.
White - $24.95 (QP-002W & size) / Black - $24.95 (QP-002 & size)
Bushmaster Gift Certificates can be the ultimate gift for the shooter in your life – give them the freedom of choice with
a Bushmaster Firearms Gift Certificate (available in amounts starting at $10). Redemption of these certificates is very flexible – easily
accomplished through our website, or by phone, fax or mail order. Just be sure to provide us the Certificate Number when placing your
order (the actual certificate is not required - just the Certificate number from its lower right corner).
• Phone Orders – When ordering through our 800 number (1 800 998 7928), please tell our sales representative that you have a
Gift Certificate and would like to use it, and provide us with the Gift Certificate Number. If your purchase total is higher than the Gift
Certificate amount, you'll be asked for a Credit Card Number, Expiration Date and billing address so that we can charge any difference
to your Credit Card.
• Mail and Fax Orders – When ordering via Mail or Fax, just
write the Certificate Number next to the payment method.
• Internet Orders – choose Gift Certificate as your Payment
Method and enter the Certificate Number in Certificate # Box.
Note: Bushmaster Gift Certificates can only be redeemed for
Merchandise (not redeemable for cash), and are valid for one year
from date of issue. See complete details on the internet,
[Link] or call 1 800 998 7928
Bushmaster Accessories / Apparel 81 [Link]