Wireline Setting Equipment
for Alpha’s bridge plugs, frac plugs & cement retainers
The information contained herein, is the property of Alpha Oil Tools, and is confidential. It may not be reproduced in any form without the written consent of an officer of Alpha Oil Tools.
This information is subject to change without notice and does not represent a commitment on the part of Alpha Oil Tools and its representatives.
These recommendations are made by Alpha Oil Tools for the benefit of all parties knowledge and understanding of the proper way to use this product and achieve the best performance.
Copyright © 1996 - 2005 Alpha Oil Tools. All rights reserved.
Alpha Oil Tools / 3044 Wichita Court / Fort Worth, TX / 76140 USA
Voice: 817-293-5192 World Wide Web: http://www.alphaoiltools.com
Fax: 817-293-9076
Email:
Sales [email protected]
Field Support: [email protected]
Purchasing: [email protected]
Engineering: [email protected]
Big Boy Bridge Plug, Midget 1 Bridge Plug, Midget 2 Bridge Plug
on Baker Wireline Pressure Setting Tool
Figure 1
26
Big Boy Bridge Plug, Midget 1 Bridge Plug, Midget 2 Bridge Plug
on Baker Wireline Pressure Setting Tool Continued
DIMENSIONAL DATA
REFER TO FIGURE 1
3.50/ 4.24/ 5.34/
DIM. 1.71 2.10 2.50 2.75 3.12 3.71 4.75 5.61 6.09 6.96 7.71 8.71 9.50 11.56 12.00 14.25 17.25
A 1.710 2.100 2.500 2.750 3.120 3.500 4.240 5.250 6.090 6.960 7.710 8.710 9.500 11.560 12.000 14.250 17.250
B 5.000 14.125 10.500 16.250 15.000 17.250 15.000
C 1.250 1.750 2.625 3.000 3.750 4.750 5.500 6.500 7.125 8.125 9.000 10.500 11.250 13.250 15.250
D not applicable 1.000 1.125
E not applicable 1.250 1.375 1.750
G not applicable 5.000 4.625 5.187 5.250
H not applicable 3.000 3.062 3.500
The number given for “C” can change due to materials available at the time of manufacture. This is given as nominal and in some cases max. diameter.
PARTS LIST
REFER TO FIGURE 1
SIZE
ITEM DESCRIPTION QTY 1.71 2.10 2.50 2.75 3.12 3.50/3.71
Complete Adapter Kit - 000-1710-900 000-2100-900 000-2500-900 000-2750-900 000-3120-900 000-3500-900
1 Setting Sleeve 1 000-1710-200 000-2100-200 000-2500-200 000-2750-200 000-3120-200 000-3500-200
2 Adjuster Sub 1 not required
- Socket Head Set Screw 1 not required
3 Lock Spring 1 not required 000-3500-203
4 Tension Mandrel 1 not required 000-3120-206 000-3500-206
PARTS LIST - continued
REFER TO FIGURE 1
SIZE
ITEM DESCRIPTION QTY 4.24/4.75 5.34/5.61 6.09 6.96 7.71 8.71
Complete Adapter Kit - 000-4240-900 000-5610-900 000-6090-900 000-6960-900 000-7710-900 000-8710-900
1 Setting Sleeve 1 000-4240-200 000-5610-200 000-6090-200 000-6960-200 000-7710-200 000-8710-200
2 Adjuster Sub 1 000-4240-209
- Socket Head Set Screw 1 5/16 - 18 x 3/8 lg
3 Lock Spring 1 000-4240-203
4 Tension Mandrel 1 000-4240-206 000-5610-206
PARTS LIST - continued
REFER TO FIGURE 1
SIZE
ITEM DESCRIPTION QTY 9.50 11.56 12.00 14.25 17.25
Complete Adapter Kit - 000-9500-900 000-1156-900 000-1200-900 000-1425-900 000-1725-900
1 Setting Sleeve 1 000-9500-200 000-1156-200 000-1200-200 000-1425-200 000-1725-200
2 Adjuster Sub 1 000-4240-209
- Socket Head Set Screw 1 5/16 - 18 x 3/8 lg
3 Lock Spring 1 000-4240-203
4 Tension Mandrel 1 000-5610-206
27
Big Boy Bridge Plug, Midget 1 Bridge Plug, Midget 2 Bridge Plug
on GO Wireline Pressure Setting Tool
Figure 2
28
Big Boy Bridge Plug, Midget 1 Bridge Plug, Midget 2 Bridge Plug
on GO Wireline Pressure Setting Tool Continued
DIMENSIONAL DATA
REFER TO FIGURE 2
1 11/16 2 1/8 1 11/16 2 1/8 1 11/16 2 1/8 3.50/ 4.24/ 5.34/
DIM. 1.71 2.10 2.10 2.50 2.50 2.75 2.75 3.12 3.71 4.75 5.61 6.09 6.96 7.71 8.71 9.50 11.56 12.00 17.25
A 1.710 2.000 2.100 2.500 2.500 2.750 2.750 3.120 3.500 4.240 5.250 6.090 6.960 7.710 8.710 9.500 11.560 12.000 17.250
B 7.343 8.281 8.812 9.250 14.250
C 1.437 1.500 1.750 2.125 3.000 3.750 4.750 5.500 6.500 7.125 8.125 9.000 10.500 11.250 15.250
D not applicable 1.375
E not applicable 1.250 1.750
F not applicable 1.500 not applicable
G not applicable 6.562 13.375
H not applicable 3.500 4.000
The number given for “C” can change due to materials available at the time of manufacture. This is given as nominal and in some cases max. diameter.
PARTS LIST
REFER TO FIGURE 2
SIZE
ITEM DESCRIPTION QTY 1.71 2.10 (1 11/16) 2.10 (2 1/8) 2.50 (1 11/16) 2.50 (2 1/8) 2.75 (1 11/16)
1 Setting Sleeve 1 000-1710-101 000-2100-101 000-2100-102 000-2500-101 000-2500-102 000-2750-101
2 Adapter Rod - not required
3 Lock Nut - not required
PARTS LIST - continued
REFER TO FIGURE 2
SIZE
ITEM DESCRIPTION QTY 2.75 (2 1/8) 3.12 3.50/3.71 4.24/4.75 5.34/5.61 6.09
1 Setting Sleeve 1 000-2750-102 000-3120-100 000-3500-100 000-4240-100 000-5610-100 000-6090-100
2 Adapter Rod 1 not required 000-3500-106 000-5610-106
3 Lock Nut 1 not required 000-3500-107
PARTS LIST - continued
REFER TO FIGURE 2
SIZE
ITEM DESCRIPTION QTY 6.96 7.71 8.71 9.50 11.56 12.00
1 Setting Sleeve 1 000-6960-100 000-7710-100 000-8710-100 000-9500-100 000-1156-100 000-1200-100
2 Adapter Rod 1 000-5610-106
3 Lock Nut 1 000-3500-107
PARTS LIST - continued
REFER TO FIGURE 2
SIZE
ITEM DESCRIPTION QTY 14.25 17.25
1 Setting Sleeve 1 000-1425-100 000-1725-100
2 Adapter Rod 1 000-5610-106
3 Lock Nut 1 000-3500-107
29
BTS Bridge Plug, BTS 1 Bridge Plug, BTS 2 Bridge Plug
on Baker Wireline Pressure Setting Tool
Figure 2A
30
BTS Bridge Plug, BTS 1 Bridge Plug, BTS 2 Bridge Plug
on Baker Wireline Pressure Setting Tool Continued
DIMENSIONAL DATA
REFER TO FIGURE 2A
3.500/ 5.340/
DIM. 3.710 4.240 5.610 6.312 7.125 8.125 9.000 9.437 10.437 11.560 12.000
A 3.500 4.312 5.375 6.312 7.000 8.000 8.875 9.437 10.437 11.500 11.750
B 12.875 12.500 10.500 9.560 9.120 9.687 9.687 9.687 9.937 10.125 10.156
C 2.875 3.000 4.687 5.000 6.375 6.968 7.688 7.688 9.750 10.875 10.875
The number given for “C” can change due to materials available at the time of manufacture. This is given as nominal and in some cases max. diameter.
PARTS LIST
REFER TO FIGURE 2A
SIZE
ITEM DESCRIPTION QTY 3.500/3.710 4.240 5.340/5.610 6.312 7.125
1 Setting Sleeve 1 005-3593-200 005-4312-200 005-5687-200 005-6312-200 005-7125-200
3 Adjuster Sub * 1 not required 000-4240-209
- Socket Head Set Screw * 1 not required 5/16 - 18 x 3/8 lg.
4 Lock Spring * 1 000-3500-203 000-4240-203
PARTS LIST - continued
REFER TO FIGURE 2A
SIZE
ITEM DESCRIPTION QTY 8.125 9.000 9.437 10.437 11.560 12.00
1 Setting Sleeve 1 005-8125-200 005-9000-200 005-9437-200 005-1043-200 005-1156-200 005-1200-200
3 Adjuster Sub * 1 000-4240-209
- Socket Head Set Screw * 1 5/16 - 18 x 3/8 lg.
4 Lock Spring * 1 000-4240-203
* - Not shown in the illustration on previous page.
Note: The BTS Plug’s do not use a tension mandrel. That function is incorporated into the shear stud.
31
